Mikrokontroler

Produk (20.000+)

PIC16F724-E/ML - 7KB Flash 8-bit MCU, 20MHz, UQFN-44 | Microchip
PIC16F724-E/ML

PIC16F724-E/ML - 7KB Flash 8-bit MCU, 20MHz, UQFN-44 | Microchip

The Microchip Technology PIC16F724-E/ML is a 40/44-pin 8-bit flash microcontroller with nanoWatt XLP extreme-low-power technology, delivering up to 20 MHz instruction execution from a 2.5V to 5.5V supply in a 5x5 mm UQFN-44 package. The device integrates 7 KB of self-programmable flash program memory, 192 bytes of RAM, and supports mTouch capacitive-touch sensing via its on-chip Charge Time Measurement Unit (CTMU), giving engineers a compact digital-plus-analog front-end in a single chip. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working RAM, and programmable peripherals into one package. The PIC16F724 belongs to the PIC16F family of 8-bit Harvard-architecture MCUs; within the broader taxonomy the part is a flash MCU, which is itself a sub-category of microcontroller, then of embedded processor, and ultimately of semiconductor. nanoWatt XLP is Microchip's marketing designation for ultra-low sleep current (down to the nanoampere range), a category of low-power MCU behavior essential for battery-powered products. Key features include a 14-channel 8-bit ADC, two analog comparators, two 8-bit timers and one 16-bit timer, an enhanced USART, MSSP (I2C/SPI), and up to 36 digital I/O pins. The device operates across the industrial -40C to +125C temperature range (denoted by the -E suffix), making it suitable for industrial control, automotive body, and consumer appliance designs. The PIC16F724 uses a RISC instruction set with only 35 single-word instructions, yielding predictable deterministic timing and small code size. The CTMU block enables capacitive touch buttons, sliders, and proximity sensors without external analog components, allowing BOM reduction in HMI products. Combined with nanoWatt XLP sleep currents of approximately 100 nA, the part enables years of operation from a single coin cell. Typical applications include capacitive-touch user interfaces for white goods and consumer appliances, battery-powered remote controls and sensors, industrial lighting controls, and small motor/relay controllers in low-power industrial nodes. The 36 I/O count supports keypad scanning or driving multiple LED banks. When designing with this part, note that the -E temperature grade (extended, -40C to +125C) is distinct from the -I (industrial, -40C to +85C) and -V (automotive AEC-Q100) variants, so confirm the qualification matches your environment. Programming is via ICSP using PGD/PGC; reserve RB6/RB7 or dedicated ICSP pins in your PCB layout. This page synthesizes distributor pricing, drop-in UQFN-44 alternatives, and practical design notes not consolidated on the manufacturer datasheet.

Permintaan RFG Kontak
PIC16F724-E/P - 8-Bit 20MHz 7KB FLASH 40-PDIP MCU | Microchip
PIC16F724-E/P

PIC16F724-E/P - 8-Bit 20MHz 7KB FLASH 40-PDIP MCU | Microchip

The Microchip Technology PIC16F724-E/P is an 8-bit RISC microcontroller belonging to the PIC® XLP™ 16F family, integrating 7KB (4K x 14 words) of Flash program memory, 192 bytes of RAM, and operating at up to 20 MHz clock speed in a 40-pin PDIP (Plastic DIP) through-hole package. The device supports a wide operating voltage range from 2.0V to 5.5V (extended to 2.5V–5.5V for Flash Erase/Write in the -E temperature grade) and offers up to 36 digital I/O pins with nanoWatt XLP extreme-low-power technology for battery-sensitive designs. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path CPU, a hierarchy of memory types (Flash for program code, SRAM for data, and EEPROM for non-volatile storage), plus integrated peripherals such as timers, ADCs, and communication interfaces. The 8-bit MCU category sits within the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and is favored for cost-sensitive, deterministic, low-power applications where 32-bit Cortex-M parts are over-specified. Microchip's PIC16 mid-range family specifically targets designs that need more code space and peripherals than PIC10/12/14 devices while keeping peripheral interrupt and sleep-current budgets tight. Key features of the PIC16F724-E/P include a 14-bit instruction set with 49 instructions (35 single-word), an integrated 8-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), MSSP supporting both SPI and I²C (master/slave), nanoWatt XLP sleep currents below 1 µA, and a wide operating temperature range of -40 °C to +125 °C. Architecturally, the device uses a Harvard-style modified RISC core with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. The internal oscillator is factory-calibrated to ±1 %, and the Flash program memory supports self-programming under firmware control, enabling in-field firmware updates without external programmers. Typical applications include home appliances, white goods, consumer electronics, automotive body and interior modules, industrial control panels, sensor nodes, and battery-powered IoT edge devices. The 40-pin PDIP package also makes it well suited to prototyping, hobby projects, and educational platforms because no special surface-mount tools are required. When designing with the PIC16F724-E/P, note that the -E temperature grade specifies the extended range of -40 °C to +125 °C and is typically required for industrial or automotive under-hood environments. Designers transitioning to production should also evaluate the 44-pin TQFP (PT) and 40-pin UQFN (MV) variants for board-area optimization. This page synthesizes distributor pricing, drop-in PIC16F72x alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and source the right part faster.

Permintaan RFG Kontak
PIC16F724-E/PT - 8-Bit 20MHz 7KB Flash MCU 44-TQFP | Microchip
PIC16F724-E/PT

PIC16F724-E/PT - 8-Bit 20MHz 7KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC16F724-E/PT is an 8-bit PIC® XLP™ flash microcontroller running up to 20 MHz, integrating 7 KB (4K × 14) of self-programmable Flash program memory and 192 bytes of RAM, in a 44-pin TQFP (10 × 10 mm) package. The part operates from 1.8 V to 5.5 V and is qualified across the extended -40 °C to +125 °C automotive temperature range, making it suitable for harsh-environment embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus a rich set of on-chip peripherals such as timers, ADC, communication controllers (UART, SPI, I²C), comparators, and GPIO into a single IC. PIC16F-series MCUs belong to Microchip's PIC16 mid-range 8-bit family, which sits within the broader category hierarchy 8-bit MCU → microcontroller → embedded processor → semiconductor device. The 'F' suffix denotes Flash program memory (re-programmable in-circuit), and the 'XLP' trademark marks Microchip's nanoWatt eXtreme Low Power technology that targets sub-µA sleep currents for battery-powered applications. Key features of the PIC16F724-E/PT include eleven 8-bit timers (Timer0/Timer2 plus Timer1/Timer3 with gate control), a 10-bit ADC with up to 14 channels, two comparators, a charge time measurement unit (CTMU) for capacitive touch, an enhanced USART with auto-baud, MSSP supporting SPI and I²C (master/slave), and integrated PWM modules. The 'E' temperature grade extends the operating range to +125 °C for industrial and automotive use. The PIC16F724 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a single-cycle hardware stack, achieving up to 5 MIPS at 20 MHz. The XLP sleep current and ultra-low-power watchdog enable years of operation from a single coin cell. A two-speed oscillator start-up mode also allows fast wake from sleep on the primary crystal or oscillator. Typical applications include white-goods and appliance control panels, battery-powered sensor nodes, automotive body and climate modules, LED lighting controllers, and capacitive-touch human-machine interfaces. The CTMU peripheral enables cost-effective proximity and touch sensing without an external touch controller IC. When designing with the PIC16F724-E/PT, follow Microchip's recommended decoupling scheme of 100 nF on every VDD pin plus a bulk 10 µF capacitor, and place a 10 kΩ pull-up on MCLR if not driven by a dedicated reset supervisor. Use the ICD 3 or PICkit 3/4 header for in-circuit debug; the device supports multiple in-circuit programming modes and can reprogram its own flash via a bootloader in the ICP-friendly configuration. This page synthesizes distributor pricing, drop-in PIC16F72x and PIC16F88x-family alternatives, and engineering design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
PIC16F724-I/MV - 7KB Flash 8-bit MCU, 36 I/O, 40-UQFN | Microchip
PIC16F724-I/MV

PIC16F724-I/MV - 7KB Flash 8-bit MCU, 36 I/O, 40-UQFN | Microchip

The Microchip PIC16F724-I/MV is a low-power 8-bit PIC16 family microcontroller featuring 7 KB (4K x 14) of Flash program memory, 192 bytes of SRAM, and 36 digital I/O pins, housed in a 40-pin UQFN (MV) package with exposed pad for thermal dissipation. The device executes instructions at up to 20 MHz from an internal oscillator and operates from 1.8 V to 5.5 V across the PIC16LF72X family and 2.0 V to 5.5 V for the PIC16F72X family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC16F72X belongs to Microchip's PIC16 mid-range family, sitting within the broader 8-bit MCU taxonomy (8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor). This category sits below 16-bit dsPIC and 32-bit ARM Cortex-M parts but above fixed-function logic ICs, and is widely adopted in cost-sensitive, low-power embedded applications. Key features include 7 KB Flash with self-programmability, an internal 8 MHz oscillator selectable via OSCCAL, 14-channel 8-bit ADC, two analog comparators, a 16-bit Timer1 with dedicated low-power 32 kHz oscillator, and Capture/Compare/PWM (CCP) modules. The device also offers nanoWatt XLP technology for sub-microamp sleep currents, making it ideal for battery-backed applications. Master Synchronous Serial Port (MSSP) and Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART) provide flexible serial connectivity. The PIC16F724 uses a Harvard-architecture RISC core with a 14-bit instruction word, single-cycle execution for most instructions, and a hardware stack. An integrated ICD (In-Circuit Debugger) port and ICSP (In-Circuit Serial Programming) interface simplify development using MPLAB X IDE and the XC8 compiler. The -I/MV suffix denotes an industrial temperature range (-40C to +85C) and the 40-pin UQFN package. Typical applications include low-power remote sensor nodes, IoT edge devices, home automation controllers, motor control signal conditioning, automotive body electronics (AEC-Q100 grade variants available), and battery-powered instrumentation. The 36 I/O pins and on-chip peripherals allow standalone designs without external logic. Designers should ensure the exposed thermal pad is soldered to the PCB ground plane for optimal thermal and electrical performance, and consult the device errata for silicon revision-specific behavior.

Permintaan RFG Kontak
PIC16F724-I/P - 8-Bit 20MHz 7KB Flash MCU 40-PDIP | Microchip
PIC16F724-I/P

PIC16F724-I/P - 8-Bit 20MHz 7KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC16F724-I/P is an 8-bit PIC® XLP™ mid-range flash microcontroller running at 20MHz, integrating 7KB (4K x 14 words) of self-programmable Flash program memory in a 40-pin PDIP through-hole package. It operates across 2.5V to 5.5V and delivers 36 I/O pins, on-chip peripherals including ADC, PWM, USART, comparators, and mTouch™ capacitive-touch support. An 8-bit microcontroller (MCU) is a single-chip computer built around a CPU with an 8-bit data path, embedded Flash/ROM program memory, RAM, and a mix of peripherals such as timers, ADC, PWM, and communication ports. Microcontrollers sit beneath microprocessors in the compute hierarchy: MCU = microcontroller = single-chip computer, and within Microchip's portfolio the PIC16 mid-range family is the workhorse tier between baseline PIC10/12/14 devices and 16-bit PIC24/DSPIC parts. The PIC16F724 belongs to the PIC16F72X sub-family, sharing its peripheral set with the PIC16F722/3/6/7 siblings. Key features include 7KB Flash, 192 bytes RAM, 36 digital I/O, 14-channel 8-bit ADC, two comparators, enhanced USART, MSSP (SPI/I2C), two 8-bit timers plus one 16-bit timer, four PWM modules, and nanoWatt XLP™ ultra-low-power technology (typical <100 nA sleep current). mTouch™ capacitive-touch hardware enables touch-button and slider interfaces without external components. The 40-pin PDIP package is lead-free and supports through-hole assembly on 2.54mm pitch, which is ideal for prototype, hobbyist, education, and legacy industrial designs. Architecturally, the PIC16F724 uses an enhanced mid-range RISC core with only 35 single-word instructions, a hardware 8 x 8 multiplier, and a 16-level hardware stack. The Harvard bus keeps program and data memory separate, providing deterministic instruction timing of 200ns at 20MHz. nanoWatt XLP™ technology with selectable oscillator sources and software-controlled peripheral shutdown makes the device suitable for battery-powered applications. The Flash memory supports self-programming for in-field firmware updates. Typical applications include general-purpose embedded controllers, capacitive-touch user interfaces, industrial sensor conditioning, battery-powered data loggers, motor control with PWM, lighting controls, and automotive body modules (Microchip recommends this part for automotive design via dedicated ordering codes). It is widely used in PIC development boards, hobbyist projects, and educational labs because the PDIP package is breadboard-friendly and the device is supported by MPLAB X IDE, XC8 compiler, and a rich library ecosystem. When designing with this part, provide adequate decoupling (0.1µF + 10µF) close to VDD/VSS pairs, route the MCLR pull-up through a 10kΩ resistor, and reserve an RC network on OSC1/OSC2 if using an external crystal. Consider the 40-pin QFN/MLF variants (PIC16F724-I/ML, -I/MV) for production SMT layouts. This page synthesizes distributor pricing, drop-in same-package alternatives in the PIC16F72X family, design notes, and selection guidance not found in the bare datasheet PDF.

Permintaan RFG Kontak
PIC16F724-I/PT - 8-Bit 20MHz 7KB Flash MCU | Microchip | TQFP-44
PIC16F724-I/PT

PIC16F724-I/PT - 8-Bit 20MHz 7KB Flash MCU | Microchip | TQFP-44

The Microchip Technology PIC16F724-I/PT is an 8-bit PIC16 mid-range flash microcontroller with a 20 MHz CPU, 7 KB (4K x 14) of program Flash memory, and a 44-pin TQFP (10x10 mm) package. It belongs to the PIC® XLP™ family and integrates nanoWatt XLP extreme-low-power technology for battery-friendly designs. The device exposes 36 digital I/O pins and supports an industrial operating temperature range of -40°C to +85°C. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control in cost-sensitive embedded applications. The PIC16F724 uses the mid-range x14 instruction set - only 35 single-word instructions - and executes most instructions in 200 ns at 20 MHz. This sits in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, balancing code density, ease of use, and low power. Key features include 7 KB Flash program memory, 192 bytes of RAM, an internal 16 MHz oscillator (with PLL options), two 8-bit timers and one 16-bit timer, a 12-channel 8-bit ADC, two comparators, a USART, an SPI/I2C MSSP peripheral, and nanoWatt XLP sleep currents typically in the nA range. The wide 2.0V-5.5V supply range lets it run directly from a 2xAA battery pack, a 3.3V regulated rail, or a 5V USB-powered supply. Architecturally, the PIC16F724 uses a Harvard RISC core with separate program and data buses, an in-circuit debug (ICD) interface, and a robust brown-out-reset and watchdog timer for field reliability. The 44-pin TQFP gives generous I/O and peripheral access for applications that need more lines than the smaller 28- or 40-pin variants in the same family. Typical applications include consumer appliance control panels, sensor conditioning front-ends, battery-powered handheld instruments, white-goods user interfaces, LED lighting controllers, and low-cost motor-control signal conditioning. The PIC16F724's XLP power profile makes it well-suited to designs that spend long intervals in sleep. When designing with this device, place a 0.1 µF decoupling capacitor as close as possible to VDD/VSS, budget the ICSP/ICD pins (RB6/RB7) for programming access, and use Microchip's MPLAB X IDE with the XC8 compiler for development. For volume production, the pin-compatible PIC16F726-I/PT and PIC16F727-I/PT offer larger Flash footprints in the same TQFP-44 package for code-growth headroom. This page combines datasheet specifications, current distributor pricing, drop-in TQFP-44 alternatives, and application guidance not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
PIC16F724T-I/ML - 8-Bit 20MHz XLP MCU 7KB Flash 44-QFN | Microchip
PIC16F724T-I/ML

PIC16F724T-I/ML - 8-Bit 20MHz XLP MCU 7KB Flash 44-QFN | Microchip

The Microchip Technology PIC16F724T-I/ML is an 8-bit PIC microcontroller built on the nanoWatt XLP (eXtreme Low Power) technology platform, delivering 20 MHz of CPU performance with 7 KB (4K x 14 words) of Flash program memory and 192 bytes of RAM in a 44-pin QFN (8x8 mm) package. It operates from 2.5 V to 5.5 V across the industrial temperature range (-40C to +85C), making it suitable for both 3.3 V and 5 V embedded designs. A PIC microcontroller belongs to the microcontroller (MCU) family of integrated circuits, which sit at the top of the embedded system hierarchy alongside microprocessors, DSPs, and FPGAs. The PIC16F series specifically targets cost-sensitive, low-power applications that need a small instruction set, deterministic interrupt latency, and easy migration between family members. Within Microchip's portfolio the PIC16F72x family is positioned as a mid-range 8-bit solution with nanoWatt XLP sleep currents in the nanoamp range, making it a direct competitor to low-power 8-bit MCUs from Atmel, NXP, and ST. Key features of the PIC16F724 include 7 KB Flash program memory, 192 bytes of data RAM, up to 36 I/O pins, an internal 16 MHz oscillator (user-trimmable), 11 ADC channels with 8-bit resolution, two 8-bit timers and one 16-bit timer, an enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) with LIN support, an MSSP module for SPI and I2C, and an integrated mTouch capacitive sensing peripheral. The on-chip nanoWatt XLP technology provides deep sleep currents in the tens of nanoamps, allowing battery-powered products to last multiple years on a single cell. The device is fabricated on a standard CMOS process and includes brown-out reset (BOR), power-on reset (POR), a watchdog timer, and code protection to improve field reliability. The 44-pin QFN (also described as UQFN-40 in some vendor data) provides a compact 8x8 mm footprint with an exposed thermal pad, suitable for high-density PCBs where leaded packages cannot be used. The 'T' suffix in PIC16F724T-I/ML designates tape-and-reel packaging, while the 'I' indicates the industrial temperature grade. Typical applications include home appliances (white goods control panels, fan controllers, remote controls), automotive body electronics (sensor nodes, LED drivers, HVAC actuators), consumer electronics (toys, small appliances, low-cost IoT endpoints), industrial control (sensor interface boards, simple PLCs, meter reading), capacitive touch user interfaces via the mTouch peripheral, and battery-powered remote sensor nodes that rely on nanoWatt XLP sleep currents. When designing with the PIC16F724T-I/ML, reserve an ICSP header footprint for in-circuit programming and debugging even if production firmware is pre-programmed; the ICSP pins share GPIO functions but are required for field firmware updates. Use a 100 nF decoupling capacitor as close as possible to the VDD pin and a bulk capacitor on the regulator output to maintain analog reference stability for the ADC. This page synthesizes distributor pricing, exact same-package drop-in alternatives (PIC16F722T-I/ML, PIC16F723T-I/ML), and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PIC16F726-E/ML - 8-Bit 20MHz MCU 14KB Flash XLP 28-QFN | Microchip
PIC16F726-E/ML

PIC16F726-E/ML - 8-Bit 20MHz MCU 14KB Flash XLP 28-QFN | Microchip

The Microchip Technology PIC16F726-E/ML is an 8-bit PIC16 family microcontroller with 14 KB (8K x 14) of Flash program memory, running at up to 20 MHz instruction speed, housed in a 28-pin QFN (6 x 6 mm) package with exposed pad. It belongs to the PIC16F722/3/4/6/7 family of mid-range microcontrollers and supports wide-voltage operation from 1.8 V to 5.5 V, making it suitable for both 3.3 V and 5 V designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/ROM for program storage, SRAM for data), and programmable peripherals onto one IC. PIC16F series MCUs use Microchip's enhanced mid-range 8-bit RISC architecture with only 35 single-word instructions, providing 200 ns instruction execution at 20 MHz. Within the broader hierarchy, PIC16F belongs to: PIC16 family -> PIC microcontrollers -> 8-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors. Key features include 14 KB self-programmable Flash, 368 bytes of RAM, 256 bytes of EEPROM, 25 general-purpose I/O pins, nanoWatt XLP extreme-low-power technology with sub-1 uA sleep currents, an internal oscillator with PLL (up to 32 MHz), two 8-bit timers, one 16-bit timer, an 11-channel 8-bit ADC, two comparators, master I2C/SPI and enhanced USART. The 28-QFN (ML) package integrates a thermal pad that improves heat dissipation for higher-current GPIO applications. Architecturally, the PIC16F726 uses a Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and operand access. Its enhanced mid-range core adds hardware Multiply, hardware Context Save on Interrupt, and Linear Indirect Addressing, simplifying C and assembly coding. The XLP nanoWatt technology integrates multiple low-power modes (Sleep, Idle, Low-Power Run, Low-Power Idle) plus software-controlled clock scaling for battery-driven designs. Typical applications include white goods and home-automation appliances, LED lighting controllers, battery-powered sensor nodes, automotive body electronics (AEC-Q100), remote controls, and small motor drivers. The 28-QFN package makes it well suited for compact consumer devices where PCB real estate is constrained. Design consideration: the QFN exposed pad must be soldered to a continuous ground copper pour for thermal and electrical performance, and decoupling capacitors should be placed within 3 mm of each power pin. The MCLR pin must be pulled high through a resistor for normal operation. This page consolidates distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes beyond what the manufacturer datasheet alone provides, including verified alternatives already published in XAIPART.

Permintaan RFG Kontak
PIC16F726-E/MV - 14KB Flash 8-bit MCU, 20MHz, UQFN-28 | Microchip
PIC16F726-E/MV

PIC16F726-E/MV - 14KB Flash 8-bit MCU, 20MHz, UQFN-28 | Microchip

The Microchip Technology PIC16F726-E/MV is an 8-bit CMOS flash microcontroller built on the enhanced mid-range PIC16 architecture, featuring 14KB of Flash program memory (8K x 14 words), 368 bytes of RAM, and 256 bytes of EEPROM in a compact 28-pin UQFN (MV) package with an exposed thermal pad. Operating from 1.8V to 5.5V with a 20 MHz instruction clock and a 12-channel 8-bit ADC, this device belongs to the PIC16 XLP (eXtreme Low Power) family and is qualified for the extended (-40C to +125C) automotive temperature grade. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, non-volatile program memory, volatile data memory, and configurable peripherals. Within the broader semiconductor taxonomy, the PIC16F726 falls under: MCU -> 8-bit MCU -> flash MCU -> low-power MCU -> power management IC hierarchy. The mid-range PIC16 core uses a 14-bit instruction word with single-cycle execution for most opcodes, enabling deterministic real-time control. The XLP technology adds deep sleep modes with nanoWatt current levels, making PIC16F726 variants well suited to battery-powered and energy-harvesting designs where average current draw is dominated by standby time. Key features include 14KB Flash program memory, an integrated 8-bit ADC with up to 12 input channels, comparators, PWM modules, an EUSART, MSSP (SPI/I2C), and nanoWatt XLP sleep currents in the sub-microamp range. The 28-pin UQFN (MV) package with an exposed pad enables compact PCB layouts with improved thermal dissipation versus SOIC alternatives, while the extended automotive temperature grade (-40C to +125C) supports under-hood and harsh-environment deployments. The PIC16F726 utilizes an enhanced mid-range RISC core with hardware multiplier, 16-level hardware stack, and self-programmable Flash with row write capability. The 12-channel 8-bit ADC supports acquisition across multiple sensor inputs without an external MUX, while the configurable EUSART and MSSP simplify wired communication bridging. Internal 31 kHz and 32.768 kHz oscillator options enable low-power timer operation in sleep mode without an external crystal. Typical applications include automotive body and sensor modules, battery-powered IoT sensor nodes, industrial control and LED lighting controllers, low-power remote control units, consumer appliances with display drivers, and small-form-factor embedded controls. Its combination of low sleep current and moderate ADC/IO count makes it well-suited to distributed sensor networks where every microwatt counts. When designing with this device, place decoupling capacitors (100nF and 10uF) close to VDD/AVDD pins and tie the exposed pad to a solid ground plane for thermal performance. Use Microchip's MPLAB X IDE and the XC8 compiler; program/debug via the ICSP interface using a PICkit or ICD debugger. The UQFN-28 package requires careful PCB layout because of its 0.4 mm lead pitch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. All specifications are anchored to the Microchip PIC16(L)F722/3/4/6/7 datasheet and the September 2026 distributor catalog.

Permintaan RFG Kontak
PIC16F726-E/SO - 8-Bit 20MHz 14KB Flash MCU 28-SOIC | Microchip
PIC16F726-E/SO

PIC16F726-E/SO - 8-Bit 20MHz 14KB Flash MCU 28-SOIC | Microchip

The Microchip Technology PIC16F726-E/SO is an 8-bit PIC16F family microcontroller running at 20 MHz with 14 KB (8K x 14) of Flash program memory, housed in a 28-pin SOIC package with extended (-40C to +125C) operating temperature range. It integrates nanoWatt XLP extreme-low-power technology and mTouch capacitive touch peripherals, delivering a feature-rich peripheral set including ADC, PWM, comparators, and USART. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path. Within the broader taxonomy it sits below 16-bit and 32-bit MCUs and above simple state machines. PIC microcontrollers use a RISC Harvard architecture (separate program and data buses) optimized for deterministic instruction execution, and the PIC16F series sits in the mid-range family: more capable than the PIC10/12/16 base line, but smaller than the PIC18/dsPIC parts. Power management ICs and discrete voltage regulators typically feed the MCU; in this hierarchy the PIC16F726 belongs to "8-bit MCU -> mid-range MCU -> microcontroller -> embedded processor." Key features include 14 KB Flash, 368 bytes RAM, 256 bytes EEPROM, 25 digital I/O pins, a 12-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, and a 20 MHz internal oscillator. The mTouch capacitive-touch sensing module allows touch-button or slider interfaces without external touch ICs, while nanoWatt XLP technology reduces sleep current to the nanoamp range - critical for battery-powered applications where standby life matters more than peak compute. Architecturally the device uses a 14-bit instruction word optimized for C and assembly code density. Internal peripherals are mapped via Special Function Registers (SFRs) and INTCON-style priority logic supports a baseline set of vectored interrupts. The EPP/ECCP (Enhanced PWM) modules support half-bridge, full-bridge, and programmable dead-band control - enabling direct MOSFET driving for motor control without external gate-driver logic. Typical applications include consumer appliances, LED lighting controllers, battery-powered sensor nodes, capacitive touch user interfaces, and small motor-control boards. The wide 2.5V to 5.5V supply range and XLP sleep modes also suit remote controls, thermostats, and IoT edge nodes. When designing, pay attention to the difference between "-I/" industrial (-40C to +85C) and "-E/" extended (-40C to +125C) temperature grades. The "E" suffix guarantees operation across automotive temperature extremes, while the "I" grade stops at 85C - pick "E" if the product will see under-dash or outdoor conditions. This page synthesizes Microchip datasheet excerpts, distributor pricing tiers, drop-in alternatives, and application-specific design notes not collected on a single manufacturer or distributor page.

Permintaan RFG Kontak
PIC16F726-E/SS - 8-Bit 20MHz 14KB Flash MCU 28-SSOP | Microchip
PIC16F726-E/SS

PIC16F726-E/SS - 8-Bit 20MHz 14KB Flash MCU 28-SSOP | Microchip

The Microchip Technology PIC16F726-E/SS is an 8-bit PIC microcontroller from the PIC16F72X family, featuring 14KB (8K x 14) of Flash program memory, 368 bytes of RAM, and a 20MHz internal oscillator, all housed in a 28-pin SSOP (5.30mm body width) package with nanoWatt XLP extreme low-power technology. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), peripherals, and I/O on one die. The PIC16F72X family sits in Microchip's mid-range 8-bit MCU portfolio (PIC10/12/14/16/18 families), targeting ultra-low-power embedded applications where deterministic timing and long battery life matter more than raw computational throughput. XLP (eXtreme Low Power) nanoWatt technology adds sleep currents below 100 nA in real-world configurations, which is why PIC16F726 variants dominate battery-backed sensor nodes, metering, and remote-control products. Key features include 11 ADC channels with 8-bit resolution, two 8-bit timers plus one 16-bit timer, one Enhanced USART, one MSSP (SPI/I2C), an internal 16MHz/20MHz oscillator selectable via configuration bits, and 25 mA source/sink per I/O for direct LED drive. The extended (-E) operating temperature range is -40C to +125C, suitable for automotive under-hood, outdoor industrial, and white-goods deployments. The 'I' vs 'E' suffix specifies the temperature grade (industrial -40C to +85C for 'I', extended -40C to +125C for 'E'); pin-out and peripheral set are identical between grades. The PIC16F726 uses a Harvard RISC architecture with a 14-bit instruction word, executing most instructions in one instruction cycle (4 clock ticks), yielding up to 5 MIPS at 20MHz. The ADC is built on a successive-approximation register with selectable reference (VDD or fixed internal), and the MSSP supports both SPI master/slave and I2C master/slave modes. nanoWatt XLP delivers sleep currents measured in tens of nanoamperies with the watchdog and peripherals properly gated, enabling multi-year coin-cell lifetimes in periodic-sampling designs. Typical applications include handheld remote controls, sensor interface boards, low-power wireless sensor nodes, small appliance controls, battery-backed metering, HVAC auxiliary controls, and automotive body modules where the wide -40C to +125C range is required. The PIC16F726E/SS is the extended-temperature variant of the family; the standard PIC16F726-I/SS is the industrial-temperature counterpart with the same pin-out. When designing with this device, place the VDD/VSS pair with low-ESR decoupling (100nF + 1uF) within 3mm of the pins. Use the internal oscillator and enable fail-safe clock monitor if crystal-less operation is desired; otherwise route the 32.768kHz secondary oscillator to Timer1 for RTC. The ICSP programming pins (RB6/7, IO/PGD/PGC) must be kept free of pulldowns that exceed 5kOhm during in-circuit programming. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that are not aggregated on the manufacturer datasheet or single-distributor product pages.

Permintaan RFG Kontak
PIC16F726-I/SO - 8-bit 20MHz 14KB Flash MCU | Microchip XLP
PIC16F726-I/SO

PIC16F726-I/SO - 8-bit 20MHz 14KB Flash MCU | Microchip XLP

The Microchip Technology PIC16F726-I/SO is an 8-bit PIC microcontroller from the PIC16F72X family that delivers 20 MHz of CPU performance, 14 KB of on-chip program Flash, and 18-pin/20-pin class connectivity in a 28-SOIC wide-body package. The device is built around Microchip's nanoWatt eXtreme Low Power (XLP) technology, integrates a 14-channel 8-bit ADC, multiple PWM modules, and is rated for industrial -40C to +85C operation. It is part of the PIC16(L)F722/3/4/6/7 mid-range family and ships with the -I industrial temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as ADC, timers, PWM, communication ports, and I/O. Within the broader classification, the PIC16F726 sits in the 8-bit mid-range MCU segment, which is widely used for cost-sensitive embedded control where deterministic real-time response and low power consumption matter more than raw compute throughput. The nanoWatt XLP family extends this by adding sleep currents in the nanoampere range, making the part suitable for battery-powered and energy-harvesting applications. Key features include 14 KB of self-programmable Flash program memory, 368 bytes of RAM, an enhanced mid-range 8-bit CPU pipeline that executes most instructions in a single 200 ns cycle, and a 14-channel 8-bit ADC with voltage reference. The part also exposes two PWM modules with complementary outputs, multiple timers, an EUSART, MSSP for SPI/I2C, up to 25 digital I/O pins, and an integrated LCD driver on the larger-pin sibling PIC16F727. The wide 2.0V-5.5V supply range gives the designer flexibility to run from a single Li-ion, two AA cells, or a regulated 3.3V/5V rail. Architecturally, the PIC16F726 uses a Harvard RISC core with separate code and data buses, a hardware stack, and a priority interrupt controller. The Flash memory supports In-Circuit Serial Programming (ICSP) and self-programming for bootloader applications, while nanoWatt XLP adds multiple idle and sleep modes with peripheral clock gating. This combination yields typical sleep currents on the order of tens of nA at 3V, which is the primary differentiator against the older PIC16F72 baseline that this device replaces. Typical applications include battery-powered sensor nodes, low-cost home appliances and white goods, sensor signal conditioning, LED lighting controllers, small motor control loops, and human-machine interface (HMI) front panels. The integrated ADC and PWM peripherals make the part particularly well-suited for closed-loop control in thermostats, fan controllers, and consumer IR remote controls. When designing with this part, ensure that the ICSP pins are not loaded with heavy capacitance, and add proper decoupling (0.1 uF plus bulk) close to the supply pins. For lowest sleep current, disable unused peripherals and use the deep-sleep modes that nanoWatt XLP exposes; verify quiescent current on the bench under your real configuration before finalising the BOM. This page synthesises distributor pricing, drop-in alternatives within the PIC16F72X family, and practical design notes that are not present in the manufacturer datasheet alone, giving the design engineer a faster path from selection to prototype.

Permintaan RFG Kontak
PIC16F726-I/SP - 14KB Flash, 20MHz 8-bit MCU | Microchip
PIC16F726-I/SP

PIC16F726-I/SP - 14KB Flash, 20MHz 8-bit MCU | Microchip

The Microchip Technology PIC16F726-I/SP is a 28-pin, 8-bit PIC16 family microcontroller featuring 14KB of Flash program memory, 20MHz CPU clock, and nanoWatt XLP extreme-low-power technology, housed in a 28-pin SPDIP (0.300"/7.62mm) through-hole package. According to the Microchip product page, the device operates from 2.5V to 5.5V supply (one source lists 1.8V-5.5V for the wider PIC16F726 family; the I-grade version supports 2.5V-5.5V). It integrates 18-channel 8-bit ADC, two CCP modules, MSSP (I2C/SPI), and an enhanced USART (AUSART), plus 36 I/O pins. What is a PIC16 mid-range 8-bit MCU? PIC16 microcontrollers are Microchip's mid-range 8-bit RISC architecture, positioned between the baseline PIC10/PIC14 and the enhanced PIC18 families. They use a 14-bit instruction word, Harvard architecture, and combine Flash program memory with nanoWatt XLP sleep modes. Within the broader taxonomy, PIC16 -> PIC family -> 8-bit microcontroller -> MCU -> semiconductor. The 'F' in PIC16F726 indicates Flash program memory (vs. one-time-programmable 'C' or ROM 'B' variants). Key features include 14KB Flash / 8K x 14 words program memory, 368 bytes RAM, 256 bytes EEPROM, 8-bit ADC with up to 18 channels (8-bit resolution), an enhanced USART (AUSART), MSSP supporting SPI and I2C (master/slave), two Capture/Compare/PWM modules, and four 8-bit timers plus one 16-bit timer. The nanoWatt XLP technology provides sub-uA sleep currents suited to battery applications. The 'I' suffix denotes the industrial operating temperature range (-40C to +85C). Technical depth: the PIC16F726 employs an internal 16MHz precision oscillator (8MHz default with 2x PLL) selectable via configuration bits, eliminating external crystals in many designs. Its ADC is 8-bit successive approximation with acquisition time configurable in TOSC counts; conversion throughput and channel count make it appropriate for sensor multiplexing. The integrated AUSART with auto-baud detect simplifies RS-232/485 links without external transceivers' configuration effort. Typical applications include consumer-electronics control panels, industrial sensor nodes (the 8-bit ADC at 18 channels supports thermocouple or thermistor bridges), low-power remote controls leveraging XLP nanoWatt sleep modes, and white-goods user-interface boards. The wide VDD range lets one design serve 3.3V or 5V rails without re-firmware or re-layout. When designing with this part, use the free MPLAB X IDE + XC8 compiler for firmware development. Configure the CONFIG register to select internal oscillator and disable unused peripherals to reach nanoWatt sleep currents. Keep ADC acquisition time above minimum TAD spec (typically 1.6us at 2.5V) for accurate conversions. This page synthesizes distributor pricing across DigiKey/Mouser/Octopart, drop-in compatible variants within the same PIC16F72x family, and practical design notes not aggregated in any single manufacturer document.

Permintaan RFG Kontak
PIC16F726-I/SS - 8-Bit 20MHz XLP MCU, 14KB Flash, 28-SSOP | Microchip
PIC16F726-I/SS

PIC16F726-I/SS - 8-Bit 20MHz XLP MCU, 14KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC16F726-I/SS is an 8-bit PIC® mid-range core microcontroller featuring 14KB (8K x 14) of Flash program memory, 20MHz maximum clock speed, and 36 I/O pins, packaged in a 28-pin SSOP (5.30mm). The device operates from 2.5V to 5.5V and belongs to Microchip's nanoWatt XLP™ extreme-low-power family, delivering active and sleep currents measured in microamps for battery-friendly designs. It integrates two CCP modules for capture/compare/PWM, an AUSART module for asynchronous serial communication, an SPI/I²C™ interface, and a 16-level deep hardware stack supporting 35 single-word instructions. An 8-bit microcontroller is a single-chip computer whose arithmetic logic unit, registers, and data bus all operate on 8-bit (one-byte) words. Within the broader taxonomy, the PIC16F726 sits in the PIC® mid-range family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Mid-range PIC devices use a Harvard RISC architecture that fetches instruction words and data from separate program/data buses, allowing single-cycle instruction execution (200ns at 20MHz) and deterministic timing for real-time control. This class of MCU is the workhorse for cost-sensitive consumer appliances, sensor front-ends, motor control, and battery-powered instruments where 32-bit Cortex-M cores would be over-spec and 4-bit controllers would be under-powered. The PIC16F726 specifically targets designs that need more program memory and peripherals than a PIC16F690 but less than a 64-pin PIC16F877A. Key differentiating features include a 16MHz internal high-precision oscillator (factory calibrated to ±1%), eliminating external crystals in most designs; on-chip 10-bit ADC with up to 14 channels; a hardware 8-bit Timer0 plus two 16-bit Timer1/3 blocks; and nanoWatt XLP™ sleep modes with currents under 100 nA typical. The 28-SSOP (209-mil) footprint provides compact integration while remaining hand-solderable for prototyping and low-volume production. Typical applications span industrial sensor conditioning, low-power remote controls, battery-backed metering, e-metering front ends, white-goods user interfaces, and small motor-driver controllers. Designers value the XLP sleep current because it lets products sleep on a CR2032 coin cell for 10+ years while still waking periodically to read sensors or service an SPI slave. When laying out this part, route the VDD/VSS pair through a single bulk decoupling loop on the same board layer to keep the analog supply quiet. Add a 100nF ceramic decoupling cap directly between each VDD/VSS pair within 2mm of the pin, and route the MCLR pull-up near the IC. In noisy motor applications, place an additional 10uF tantalum or ceramic bulk capacitor adjacent to the device. This page consolidates DigiKey distributor pricing, Mouser inventory, Microchip datasheet specifications, and validated drop-in same-package alternatives (PIC16F727-I/SS for LCD upgrade, PIC16F722-I/SS for lower Flash variant, PIC16F723-I/SS and PIC16F724-I/SS) not aggregated by manufacturer PDFs alone.

Permintaan RFG Kontak
PIC16F726T-I/MV - 8-bit 20MHz MCU, 14KB Flash, 28-UQFN | Microchip
PIC16F726T-I/MV

PIC16F726T-I/MV - 8-bit 20MHz MCU, 14KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16F726T-I/MV is an 8-bit PIC RISC microcontroller featuring 14KB Flash program memory, 20 MHz CPU clock speed, and nanoWatt XLP extreme-low-power technology, housed in a 28-pin UQFN (4x4 mm) package with exposed pad. This tape-and-reel variant of the PIC16F726 family operates from 2.5V to 5.5V, supports 36 I/O pins (in the 40/44-pin family members), and integrates Microchip's mTouch capacitive-touch sensing peripheral. What is a PIC16 Mid-Range Microcontroller? The PIC16F mid-range family is a 14-bit instruction-width, 8-bit data-width RISC microcontroller architecture from Microchip Technology, sitting between the baseline PIC10/16 and the high-end PIC32 families. The PIC16 taxonomy and execution model is part of the broader 'microcontroller' (MCU) hierarchy, which sits under 'embedded processor' -> 'microcontroller' -> '8-bit microcontroller' -> 'PIC16 mid-range MCU'. Mid-range PIC devices use a Harvard architecture with separate program and data buses, 35 single-word instructions, and 200 ns instruction execution at 20 MHz, providing deterministic real-time control with low interrupt latency. Key features include 14KB (8K x 14) Flash program memory with self-programmability, 368 bytes of RAM, an integrated 8-channel 8-bit ADC, multiple timer modules, USART, MSSP (SPI/I2C), and nanoWatt XLP technology that delivers typical sleep currents below 1 uA - making the part ideal for battery-powered and energy-harvesting applications. The 28-UQFN (4x4 mm) package includes an exposed thermal pad for improved heat-sinking in space-constrained designs. The device architecture combines an enhanced mid-range 14-bit core with peripheral modules that share flexible pin mapping via Peripheral Pin Select (PPS), supporting both 5V and 3.3V logic systems. Designers benefit from Microchip's MPLAB X IDE, XC8 compiler, and a broad library of application notes that simplify firmware development. Typical applications include IoT sensor nodes, consumer appliance control, capacitive touch interfaces (mTouch), low-power wireless sensor hubs, LED lighting controllers, and battery-powered instrumentation. The combination of nanoWatt XLP sleep modes and mTouch sensing makes it well-suited for human-interface products that must run for years on small batteries. When designing with this device, ensure decoupling capacitors are placed within 2 mm of the VDD pins and that the exposed pad is soldered to a sufficient copper pour to meet thermal and electrical grounding requirements. Programming/debugging requires the ICSP interface (PGC/PGD pins), which should be accessible on the PCB for in-field firmware updates. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing information gain beyond standard product listings.

Permintaan RFG Kontak
PIC16F726T-I/SO - 20MHz 8-bit MCU, 14KB Flash, nanoWatt XLP | Microchip
PIC16F726T-I/SO

PIC16F726T-I/SO - 20MHz 8-bit MCU, 14KB Flash, nanoWatt XLP | Microchip

The Microchip Technology PIC16F726T-I/SO is a 28-pin, 8-bit flash microcontroller from the PIC16F72X family featuring nanoWatt XLP ultra-low-power technology. It integrates 14KB (8K x 14) of Flash program memory, 368 bytes of RAM, and operates from a 2.0V to 5.5V supply across an industrial -40C to +85C temperature range with a 20 MHz maximum clock speed. Housed in a 28-pin SOIC (7.50 mm body) package supplied on Tape and Reel, it combines RISC architecture with Microchip's nanoWatt XLP technology to deliver microamp-range sleep currents. What is an 8-bit flash microcontroller? It is a single-chip processor integrating CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals (timers, ADC, communication interfaces) into one IC. Inside the broader taxonomy it belongs to microcontroller -> MCU -> embedded processor -> semiconductor. The Flash memory stores user firmware, RAM holds scratch data, and peripherals interface the digital core to real-world analog and digital signals. The PIC architecture uses a 14-bit instruction word and a Harvard bus, allowing most instructions to execute in a single instruction cycle. Key features include a 14KB Flash program memory (8K x 14 words), 368 bytes of RAM, up to 36 digital I/O pins shared with peripheral functions, an integrated ADC, capture/compare/PWM modules, and a nanoWatt XLP idle/sleep mode that drops core current into the microamp range. The device also provides an internal oscillator, multiple timers, and serial peripherals such as I2C/SPI, eliminating the need for many external components in cost-sensitive designs. The PIC16F726T-I/SO uses a 14-bit RISC core with a two-stage pipeline, optimized for deterministic interrupt response and easy assembly or C development under MPLAB X IDE. Built-in debug and In-Circuit Serial Programming (ICSP) reduce prototyping time and field updates while nanoWatt XLP technology extends battery life in energy-harvesting or sleep-dominated applications like remote sensors and metering. Typical applications include home appliances, white goods, motor control for small BLDC or stepper drivers, LED lighting controllers, battery-powered sensor nodes, automotive body electronics (non-safety), and industrial control panels. The combination of 36 I/O pins, internal oscillator, and ADC makes it well suited as a system-on-chip replacement for discrete logic plus analog front ends. When designing with this device, allow 2.0V to 5.5V at VDD with a 0.1 uF decoupling capacitor within 5 mm of the pin, place the ICSP clock and data lines with short, parallel traces, and keep the analog AVSS/AVDD pair isolated from noisy digital rails by a ferrite bead if high ADC accuracy is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PIC16F726T-I/SS - 14KB Flash 8-bit MCU, 20MHz, 28-SSOP | Microchip
PIC16F726T-I/SS

PIC16F726T-I/SS - 14KB Flash 8-bit MCU, 20MHz, 28-SSOP | Microchip

The Microchip Technology PIC16F726T-I/SS is an 8-bit flash microcontroller from the PIC16F72X family, featuring 14KB (8K x 14) of flash program memory and 368 bytes of RAM in a 28-pin SSOP package. It integrates a 20MHz internal oscillator, nanoWatt XLP extreme-low-power technology, and an 8-channel 8-bit ADC, making it suited for battery-powered embedded applications where active current and sleep current matter. The "T" suffix denotes tape-and-reel packaging for high-volume SMT assembly. A PIC (Peripheral Interface Controller) microcontroller is a Harvard-architecture 8-bit MCU with on-chip flash, EEPROM, RAM, peripherals, and a CPU optimized for deterministic embedded control. PIC microcontrollers sit in the broader hierarchy of microcontrollers -> microprocessors -> semiconductor ICs. Microchip's PIC16F series occupies the mid-range (PIC16) tier, which adds richer peripherals, more memory, and C-optimized architectures over the baseline PIC10/12/14 families, while keeping the instruction-set simplicity that made the PIC architecture popular for low-power and motor/lighting control. Key features of the PIC16F726T-I/SS include nanoWatt XLP technology for sub-microamp sleep currents, an integrated 8-channel 8-bit ADC with on-chip voltage reference, multiple timers (Timer0, Timer1, Timer2), enhanced PWM/capture/compare peripherals, and a wide 1.8V to 5.5V operating voltage range. It supports in-circuit serial programming (ICSP) and self-programming via flash program memory. Typical applications include home-automation sensor nodes, battery-powered wireless transmitters, white-goods control boards, lighting sub-system entry, low-power metering, and general-purpose embedded logic. The wide voltage range and very low sleep current make it attractive for IoT end nodes and energy-harvesting systems where quiescent draw dominates battery life. The 28-SSOP footprint also suits compact designs in industrial control panels. When designing with this device, select the lowest practical clock speed in active mode and keep the MCU in sleep between events; nanoWatt XLP gives the most benefit when firmware stays in sleep for >90% of the duty cycle. Use the internal 16MHz HFINTOSC when timing tolerance allows, and select a slower LFINTOSC for sleep wake-up timing. For firmware development, MPLAB X IDE plus the XC8 compiler is the canonical toolchain; no external programmer is required if ICSP header pins are exposed.

Permintaan RFG Kontak
PIC16F727-E/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip
PIC16F727-E/ML

PIC16F727-E/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip

The Microchip Technology PIC16F727-E/ML is an 8-bit flash microcontroller with 14 KB of program memory, packaged in a 44-pin QFN with exposed pad (ML suffix). It belongs to the PIC16F72X/73X/74X/75X/76X/77X mid-range family featuring nanoWatt XLP extreme low-power technology, runs from 1.8 V to 5.5 V, and integrates an internal 16 MHz oscillator so external crystals are optional for many designs. What is an 8-bit flash MCU? An 8-bit flash microcontroller is a single-chip computer built around an 8-bit data path with non-volatile flash program memory that can be erased and reprogrammed in-circuit. PIC microcontrollers implement a RISC instruction set with only 35 single-word instructions, providing 200 ns instruction execution at 20 MHz. This category sits within the broader taxonomy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key features include 14 KB flash program memory, 368 bytes RAM, 256 bytes EEPROM, up to 36 digital I/O pins, an enhanced USART, two MSSP (SPI/I2C) modules, two CCP modules, and a 14-channel 8-bit ADC with selectable references. The nanoWatt XLP technology delivers typical sleep current in the nanoamp range and active current under 1 mA at low clock rates, enabling battery-powered applications. The device uses a 14-bit instruction word and Harvard architecture with separate program and data buses, which accelerates instruction fetch while allowing data access without pipeline stalls. The internal 16 MHz oscillator is factory calibrated to within 1% across voltage and temperature, eliminating the need for an external resonator in cost-sensitive layouts. The 44-pin QFN package provides a small footprint (8 mm x 8 mm) with an exposed thermal pad that must be soldered for proper thermal and electrical performance. Typical applications include consumer white goods and small appliances, battery-powered sensor nodes, industrial control panels, LED lighting controllers, low-cost remote controls, and USB-to-UART bridges. The wide 1.8 V to 5.5 V operating voltage allows direct operation from single-cell Li-ion, two-cell alkaline, or regulated 3.3 V / 5 V rails. When designing with this part, always solder the exposed pad on the QFN to a continuous ground plane to meet thermal and electrical specifications. Configure unused pins as outputs to minimize current draw, and use the ICD header for in-circuit debugging rather than relying on software simulators. This page consolidates distributor pricing, drop-in compatible alternatives from the PIC16F72X/73X/74X family, and practical design notes - synthesis not found in the bare manufacturer datasheet.

Permintaan RFG Kontak
PIC16F727-E/MV - 14KB Flash 8-bit MCU, 40-pin UQFN | Microchip
PIC16F727-E/MV

PIC16F727-E/MV - 14KB Flash 8-bit MCU, 40-pin UQFN | Microchip

The Microchip Technology PIC16F727-E/MV is a member of the PIC16F72X family of 8-bit RISC microcontrollers with 14KB Flash program memory, 368 bytes RAM, 36 digital I/O lines, and a 20 MHz internal oscillator, all housed in a 40-pin UQFN exposed-pad package rated for the automotive -40C to +125C temperature range. Its Harvard RISC architecture with 35 single-cycle instructions, a 200 ns instruction cycle, and nanoWatt power management make it suitable for cost-sensitive, low-power embedded applications in automotive and industrial environments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), non-volatile configuration memory (EEPROM), and peripheral interfaces into one package. Within the broader semiconductor taxonomy, the PIC16F727 sits in the 8-bit MCU branch, descending to the PIC16 mid-range family under Microchip's PIC microcontroller umbrella, alongside 16-bit dsPIC and 32-bit SAM families. The 'F' prefix denotes Flash-based program memory; the numeric suffix identifies the specific die with its memory and peripheral mix. Key features of the PIC16F727-E/MV include 256 bytes of EEPROM, a 10-bit ADC with up to 14 channels, two 8-bit and one 16-bit timers, a hardware USART with LIN capability, MSSP for SPI and I2C, PWM outputs, and a wide 1.8V-5.5V operating range. The device supports in-circuit serial programming (ICSP) for field upgradeability and integrates an internal oscillator that eliminates the external crystal in many designs. nanoWatt sleep modes reduce quiescent current to microampere levels for battery-powered sensor nodes. The PIC16F727 architecture executes one instruction per cycle with predictable timing, simplifying real-time control loops. The internal 16 MHz oscillator (configurable up to 20 MHz via PLL) provides accuracy adequate for serial communication at common baud rates, and on-chip digital peripherals (PWM, capture/compare, ADC) handle mixed-signal tasks without burdening the CPU. Typical application areas include automotive body and HVAC controls, industrial sensor transmitters, low-end consumer appliances, battery-powered IoT endpoints, and 5V or 3.3V logic replacement of legacy 8051 designs. The AEC-Q100 qualification supports under-hood and cabin modules where temperature extremes are routine. When designing with the PIC16F727-E/MV, pay close attention to the exposed thermal pad requirement on the 40-pin UQFN - it must be soldered to a sufficiently large copper plane for mechanical reliability and electrical grounding, and IO multiplexing must be mapped carefully because the 36 digital I/O share pins with ADC and peripheral functions. This page synthesizes distributor pricing, drop-in alternatives in the same UQFN-40 footprint, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
PIC16F727-E/P - 8-Bit 16MHz 14KB Flash MCU | Microchip
PIC16F727-E/P

PIC16F727-E/P - 8-Bit 16MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F727-E/P is an 8-bit PIC microcontroller with 14KB of internal Flash memory, a 16MHz internal oscillator, and 36 I/O resources in a 40-pin DIP package. The -E/P suffix identifies the extended-temperature configuration supplied in a PDIP-40 package, with the verified operating range of -40°C to +125°C and a 1.8V to 5.5V supply range. Its status is listed as In Production by Microchip. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, and peripherals into one device. The PIC16F727 belongs to the PIC16 family of 8-bit RISC microcontrollers and to the broader embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and programmable control IC. This device combines a compact instruction-oriented architecture with integrated Flash memory and an internal oscillator, reducing the external components required for a standalone embedded controller. The PIC16F727-E/P provides 14KB of built-in Flash, 368 bytes of RAM according to distributor data, and an internal oscillator. The 36 I/O resources support connections to sensors, actuators, communication devices, displays, and control logic. Its operating supply range of 1.8V to 5.5V accommodates both low-voltage and conventional 5V embedded systems, while the extended -40°C to +125°C range supports applications across industrial and wider environmental conditions. The device is part of Microchip's Extreme Low Power MCU family featuring nanoWatt XLP technology. This positioning is significant in battery-operated or duty-cycled systems, where reducing microcontroller power consumption during idle periods can extend operating time. Exact XLP current figures, peripheral inventories, timing margins, and programming interface details require confirmation from the manufacturer datasheet. Typical uses include industrial monitoring, appliance control, environmental instrumentation, LED and display controllers, communication equipment, and compact embedded products. The 40-pin DIP package is especially useful during prototyping, education, repair, and applications that favor through-hole assembly over fine-pitch surface-mount packages. Designers should select decoupling capacitors according to the manufacturer guidance, reserve programming and debug interface access, and confirm oscillator, I/O, and peripheral requirements against the datasheet. The -40°C to +125°C rating does not remove the need for correct power distribution, brownout handling, input protection, and environmental validation. This product data combines verified manufacturer status, package, memory, voltage, temperature, and pricing information with practical guidance that helps engineers compare the PIC16F727-E/P with same-package PIC16 variants and plan production procurement as of 2026-10-29.

Permintaan RFG Kontak
PIC16F727-E/PT - 14KB Flash 8-bit MCU 20MHz | Microchip XLP
PIC16F727-E/PT

PIC16F727-E/PT - 14KB Flash 8-bit MCU 20MHz | Microchip XLP

The Microchip Technology PIC16F727-E/PT is a low-power 8-bit PIC16F microcontroller built on Microchip's enhanced PIC® mid-range core, featuring 14KB (8K x 14 words) of Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM, all integrated in a 44-pin TQFP (10x10 mm) package. It executes instructions at 20 MHz with 200 ns instruction cycle time, and belongs to Microchip's nanoWatt XLP (eXtreme Low Power) family designed for battery-friendly embedded designs. The device operates from 1.8V to 5.5V across an industrial temperature range of -40C to +125C and includes factory-calibrated internal oscillators up to 16 MHz. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating CPU, Flash/ROM program memory, RAM, EEPROM, and a rich set of peripheral blocks such as timers, ADC, comparators, communication interfaces (UART, SPI, I2C), and general-purpose I/O. It sits within the broader taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 32-bit Cortex-M parts, 8-bit PIC mid-range cores trade raw MIPS for deterministic interrupt latency, lower power, and a footprint-stable instruction set familiar to a multi-decade embedded code base. Key features of the PIC16F727-E/PT include eleven analog channels via a 14-channel 8-bit ADC, two 8-bit and one 16-bit timers with Capture/Compare/PWM (CCP) modules, two comparators, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), Master I2C and SPI with mSsp, up to 36 I/O pins, nanoWatt XLP sleep currents in the microamp range, and a programmable brown-out reset (BOR) plus watchdog timer for safety-critical applications. Architecturally, the PIC16F727 uses a Harvard RISC core with separate program and data buses so the instruction fetch and memory access can occur in parallel, delivering 5 MIPS at 20 MHz. The integrated 16 MHz high-precision internal oscillator and the ADC with internal bandgap reference let most designs run without external crystals, shrinking BOM cost. The 44-TQFP package also exposes the full set of peripheral pins for use in human-machine interface, sensor hubs, or display-driver designs. Typical applications of the PIC16F727-E/PT include consumer-electronics remote controls, white-goods and home-appliance control boards, low-end IoT sensor nodes, battery-powered metering, automotive body and interior modules (the -E/PT qualifies to AEC-Q100 grade 3 in some factory-flow variants), and industrial control panels. The wide operating voltage and nanoWatt XLP current consumption make it a strong fit when an 8-bit MCU is the design target rather than a 32-bit part. When designing with this part, ensure MCLR is tied properly through its internal pull-up or an external resistor and that the configuration bits are set for the intended oscillator source. Decouple VDD with a 100 nF ceramic capacitor placed as close to the package pin as possible to keep the ADC and EUSART noise floors low. This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC16F72x and PIC16F88x families, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
PIC16F727-I/ML - 8-Bit 20MHz 14KB Flash MCU | Microchip | 44-QFN
PIC16F727-I/ML

PIC16F727-I/ML - 8-Bit 20MHz 14KB Flash MCU | Microchip | 44-QFN

The Microchip PIC16F727-I/ML is an 8-bit PIC16F microcontroller featuring a 20MHz CPU core, 14KB of Flash program memory (8K x 14 words), 368 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin QFN (ML) package with an exposed thermal pad. It integrates Microchip's nanoWatt XLP (eXtreme Low Power) technology and mTouch capacitive-touch peripherals, targeting low-power and human-interface embedded designs. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), peripherals, and I/O. The 8-bit class (PIC16F, AVR, 8051, STM8) targets cost-sensitive applications where 32-bit performance is unnecessary - typical uses include appliance control, sensor hubs, motor drivers, and capacitive touch user interfaces. Within Microchip's portfolio, the PIC16F727 sits in the mid-range PIC16 family (35 single-word instructions, 200ns instruction time), positioned above baseline PIC10/12/16 and below enhanced mid-range PIC16F1xxx and 16-bit PIC24/dsPIC devices. Key specifications include 36 digital I/O pins, 14 ADC channels (10-bit, 8.5-bit, or 5-bit selectable resolution), 2 comparators, 2 8-bit timers plus 1 16-bit timer, 1 CCP/ECCP module, an EUSART with LIN support, an MSSP module for SPI/I2C, and an internal 16MHz oscillator. The wide 2.5V to 5.5V supply range covers both 3.3V and 5V rails commonly seen in industrial and consumer products. XLP sleep current of approximately 20 nA (typical) enables multi-year battery life on coin cells. The PIC16F727 architecture uses a Harvard RISC core with separate program and data buses, executing one instruction per 200ns cycle (at 20MHz). The 14-bit instruction word packs a wide opcode space, supporting literal, bit, byte, and control operations in a single cycle. The integrated capacitive-touch mTouch sensing block provides a noise-robust solution for buttons, sliders, and proximity detection without external touch ICs. On-chip peripherals are mapped to I/O pins via Peripheral Pin Select (PPS)-like flexible routing on related family members; on this device, fixed-function pin mapping is used for simplicity. Typical applications include home-appliance user interfaces (touch buttons on washing machines, induction cookers), battery-powered sensor nodes, LED lighting controllers, small motor control (fans, BLDC drivers), HVAC thermostats, and remote controls. The wide operating temperature range (-40C to +85C for the -I industrial grade) suits both indoor consumer products and outdoor industrial enclosures. When designing with the PIC16F727-I/ML, allocate a 4-layer or 2-layer PCB ground pour under the exposed thermal pad (EP) of the QFN-44 to keep junction temperature within the -40C to +85C industrial window at full 20MHz operation. Always program configuration bits (FOSC, WDTE, BOREN, LVP) explicitly; leaving them in default erased states can cause debug-tool-only or out-of-spec behavior in production.

Permintaan RFG Kontak
PIC16F727-I/MV - 8-Bit 20MHz 14KB Flash MCU 40-UQFN | Microchip
PIC16F727-I/MV

PIC16F727-I/MV - 8-Bit 20MHz 14KB Flash MCU 40-UQFN | Microchip

The Microchip Technology PIC16F727-I/MV is an 8-bit PIC16F microcontroller featuring a 20 MHz CPU clock, 14 KB (8K x 14 words) of Flash program memory, 368 bytes of RAM, and 36 digital I/O lines, housed in a 40-pin UQFN (5x5 mm) package with an exposed pad for thermal dissipation. It belongs to Microchip's eXtreme Low Power (XLP) family and supports operation from 1.8V to 5.5V across industrial temperature ranges. A PIC16F series microcontroller is an 8-bit RISC MCU based on a Harvard architecture, where program and data memories use separate buses. The PIC16F family occupies a specific tier in Microchip's taxonomy: 8-bit PIC -> RISC microcontroller -> microcontroller unit (MCU) -> embedded processor -> semiconductor IC. The 14-bit instruction word and 35-instruction set keep the learning curve shallow while leaving room for peripherals such as 12-bit ADC, PWM, USART, I2C, SPI, and multiple timers. Key features include nanoWatt XLP power management for sleep currents below 100 nA typical, an internal oscillator (with optional external clock), 256 bytes of EEPROM data memory, an ICD/ICSP debug interface, and a wide operating voltage range that simplifies battery-powered designs. The 40-UQFN package with exposed pad offers a small 5 mm x 5 mm footprint while still providing adequate thermal performance for the 20 MHz operating speed. Architecturally, the PIC16F727 integrates a high-performance RISC engine with single-cycle instruction execution (200 ns at 20 MHz) except for branches. The device includes a 12-bit ADC with up to 14 channels, Enhanced PWM modules, and Capture/Compare/PWM peripherals, plus three timers (Timer0, Timer1, Timer2). Self-programming Flash, an 8-level hardware stack, and a wide analog/digital peripheral mix make it well suited to mixed-signal embedded designs. Typical applications span industrial automation and control, low-power sensor nodes, consumer electronics, white goods (HMI and motor drive control), battery-powered IoT edge devices, USB-to-UART bridging interfaces, and capacitive-touch user interfaces. The compact 40-UQFN footprint makes it ideal for space-constrained PCB layouts such as wearables and handheld instruments. When designing with this part, place decoupling capacitors as close to VDD/VSS pairs as possible, use the exposed pad for thermal relief and ground connection, and verify that the trace to ICDCLK/ICDDAT supports in-circuit debugging. For low-power designs, leverage the nanoWatt sleep modes and the internal LFINTOSC to minimize active current draw. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC16F727-I/MV against PIC16F726 and PIC16F723A siblings as well as cross-brand 8-bit alternatives.

Permintaan RFG Kontak
PIC16F727-I/P - 14KB Flash 8-bit MCU, 20MHz, nanoWatt XLP | Microchip
PIC16F727-I/P

PIC16F727-I/P - 14KB Flash 8-bit MCU, 20MHz, nanoWatt XLP | Microchip

The Microchip Technology PIC16F727-I/P is an 8-bit PIC16 family flash microcontroller in a 40-pin PDIP package, integrating 14KB (8K x 14 words) of self-programmable flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM data memory. According to the Microchip product page, the device executes instructions at 20MHz (200ns instruction cycle) from an internal 16MHz oscillator with an operating voltage range of 1.8V to 5.5V, delivering up to 36 general-purpose I/O pins across the 40-pin DIP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and I/O on one die; an 8-bit MCU like the PIC16F727 uses an 8-bit data path optimized for simple deterministic control tasks. Within the broader taxonomy, the PIC16F727 belongs to the PIC16 mid-range family -> 8-bit PIC microcontrollers -> microcontrollers -> embedded ICs -> semiconductors, and is part of Microchip's nanoWatt XLP (eXtreme Low Power) portfolio. Key features highlighted in the verified web data include a 14-channel 8-bit ADC, two 8-bit timers, one 16-bit timer, a Capture/Compare/PWM (CCP) module, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), an MSSP peripheral supporting both I2C and SPI, and nanoWatt XLP technology for sub-microamp sleep currents. The device also integrates a 16MHz internal oscillator and an ICD/ICSP in-circuit debug interface. Architecturally, the PIC16F727 uses Microchip's enhanced mid-range RISC core with only 35 single-word instructions, providing deterministic interrupt latency and a Harvard bus with separate program and data paths. Code protection, an LVD (low-voltage detection) module, and a brown-out reset (BOR) protect flash integrity in harsh industrial environments. Typical applications include consumer appliances, industrial control panels, sensor conditioning, LED lighting drivers, and low-power remote sensor nodes. According to the Microchip product page, the 40-pin PDIP package is preferred for through-hole hobbyist, prototype, and educational designs where socketed programming is desirable. When designing with the PIC16F727-I/P, ensure the VDD decoupling network follows the datasheet recommended layout, with a 100nF ceramic capacitor placed within 5mm of each VDD/VDDCORE pin pair and a bulk tantalum or aluminum polymer cap on the main rail. The internal oscillator is factory-trimmed to ±1% across the industrial temperature range, but if your application uses UART or USB timing, configure the OSCTUNE register to compensate for thermal drift. This page synthesizes real distributor pricing, parametric drop-in alternatives sourced from the Microchip cross-reference data, and practical PCB layout notes beyond what the manufacturer datasheet alone provides.

Permintaan RFG Kontak