Mikrokontroler

Produk (20.000+)

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog
Z86E3116SEG

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116SEG is an 8-bit Z8 CISC microcontroller with 2KB of one-time-programmable program memory, 125 bytes of RAM, 24 I/O lines, and a 16MHz maximum operating frequency, supplied in a 28-pin SOIC package. It operates from a 4.5V to 5.5V supply across a -40°C to +105°C temperature range. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and supporting peripherals into one package. The Z86E3116SEG belongs to the Z8 family of 8-bit microcontrollers, a class commonly used for embedded control because it combines a compact instruction set, dedicated I/O, and low-cost single-power-supply operation. Its larger program and data memories distinguish it from basic 8-pin devices while retaining the straightforward architecture suited to appliance controls, interface logic, and compact embedded systems. Key features include 2KB of OTP program memory, 125 bytes of RAM, 24 I/O lines, and operation up to 16MHz. Programmable OTP options listed in the device data include an RC oscillator, EPROM protection, auto latch disable, and permanent disable. The 28-pin SOIC package is also available in tube packaging according to the verified distributor data, supporting conventional through-hole board assembly rather than a compact surface-mount land pattern. The device uses the Z8 CISC architecture and includes an internal oscillator option according to the published specification summary. Its 125-byte RAM supports protocol state, counters, status flags, and short working buffers, while the 2KB OTP program area provides fixed firmware storage after programming. Because OTP memory cannot be electrically rewritten, firmware changes normally require a new programmed device rather than an in-circuit update. Typical uses include temperature controllers, appliance user interfaces, simple motor-control logic, industrial panel controllers, and embedded peripheral interfaces. In these applications, the 24 available I/O lines can distribute digital signals while the 16MHz operating rate supports time-based control routines and serial communication handling. A designer should still budget memory for interrupts, protocol handling, and application logic. The primary design constraint is nonvolatile program flexibility: OTP programming makes Z86E3116SEG appropriate for production builds with stable firmware, while applications requiring field updates may prefer a flash-memory MCU. Board layouts must also respect the 28-pin SOIC footprint and provide the required 4.5V to 5.5V supply, decoupling, programming interface, and exposed I/O routing. This product page consolidates verified distributor specifications, package information, temperature limits, and drop-in comparison data, then adds practical guidance on OTP programming, power-supply design, PCB layout, and selection constraints that are not presented as a complete replacement for the manufacturer datasheet.

Permintaan RFG Kontak
Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog
Z86E3116SSG

Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog

The Zilog, Inc. Z86E3116SSG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 2 KB of one-time-programmable memory in a 28-pin SOIC package. It combines a compact embedded-control architecture with on-chip nonvolatile program storage for designs that do not require frequent firmware updates. The 28-pin surface-mount package provides dedicated I/O capacity while supporting compact control boards, household appliances, and dedicated embedded modules. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Z8 belongs to the microcontroller hierarchy within integrated circuits and embedded processing. The Z86E3116SSG uses one-time-programmable memory, meaning its final firmware is written during manufacturing or production and cannot be rewritten afterward. This is useful for stable products where field updates are unnecessary and security through write protection is desirable. The device's headline characteristics are an 8-bit CPU architecture, a 16 MHz operating frequency, and 2 KB of OTP program memory. Its 28-pin SOIC package is designed for conventional surface-mount assembly and provides a practical upgrade from larger through-hole controllers when board area is constrained. Because the target MPN is identified as a Z8 2K OTP device, it is suited to compact control logic rather than connectivity-heavy or high-memory embedded systems. Program memory size is the principal design boundary. A 2 KB OTP budget supports a compact state machine, supervisory routine, keypad controller, or simple peripheral-control firmware, but it requires disciplined code sizing and limits the amount of application logic, tables, and diagnostics that can be included. The 16 MHz clock provides the timing headroom needed for responsive control loops, scanning, and communication routines, provided the firmware is designed around the limited code storage. Typical applications include appliance control modules, small motor-control boards, illumination controllers, keypads, security accessories, and compact embedded control products. A designer should assign ports according to the datasheet pin description table and reserve the programming and reset-related pins required by the selected Z8 device functions. The 28-pin package also makes it practical to retain through-hole-style prototyping while moving to automated surface-mount production. The primary engineering consideration is validating the complete firmware image before OTP programming. Because OTP cannot be revised after programming, functional testing, boundary-condition checks, and production traceability become especially important. Verify the oscillator, reset behavior, port multiplexing, and any peripheral configuration against the manufacturer datasheet before releasing devices for programming. This page combines manufacturer-oriented device identification, verified distributor specifications, same-family drop-in candidates, and practical design guidance for teams evaluating the Z86E3116SSG as a compact 8-bit control solution.

Permintaan RFG Kontak
Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog
Z86E3312PSG

Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog

Zilog Z86E3312PSG is an 8-bit Z8 microcontroller operating at 12 MHz with 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 general-purpose I/O pins. The device is housed in a 28-pin plastic DIP package and operates from a 4.5 V to 5.5 V supply. Its integrated peripherals include power-on reset, a watchdog timer, and EBI/EMI connectivity, making it suitable for compact embedded control systems, appliance controls, and simple peripheral interfaces. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set while using registers, memory, and dedicated I/O circuitry to control a system. The Z86E3312PSG belongs to the Zilog Z8 family, combining a general-purpose embedded processor with on-chip memory and communication resources in one package. Its one-time-programmable memory allows a finished device to be programmed once for a specific application, which is useful for cost-sensitive controllers where field re-programming is unnecessary. The Z86E3312PSG combines a 12 MHz operating clock with 4 KB of OTP program memory and 237 x 8 bytes of RAM. Its 24 general-purpose I/O pins provide substantial parallel connectivity for switches, indicators, relays, displays, sensors, and external logic. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery after faults. EBI/EMI resources add external bus or interface capability without requiring a separate protocol controller. The 4.5 V to 5.5 V operating range places the device in a classic 5 V embedded-control environment. A 5 V rail allows direct interfacing with many conventional 5 V logic families, although every external signal and supply rail must remain within the limits defined by the manufacturer datasheet. The 12 MHz clock provides the execution rate for control loops, state machines, user-interface scanning, and moderate data-processing tasks rather than high-throughput workloads. Typical uses include appliance and equipment controllers, building-control interfaces, LED and switch management, simple industrial modules, and embedded peripheral controllers. The 24 I/O pins are particularly useful when a design must connect multiple discrete inputs and outputs while retaining external-bus capability. A system can place the MCU between operator controls and actuators while using the watchdog timer to recover from firmware or communication stalls. Design around the DIP-28 footprint and verify all pin assignments from the manufacturer pin-description table before laying out the PCB. Place the device away from heat sources and follow the recommended decoupling arrangement for the 5 V supply. Because OTP memory cannot be rewritten, validate the complete firmware image before programming the production device and maintain a controlled manufacturing process. This product page consolidates the core electrical, memory, interface, lifecycle, and package characteristics of the Z86E3312PSG with practical application guidance. It also distinguishes verified functions from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate controller selection, PCB reuse, firmware planning, and production provisioning.

Permintaan RFG Kontak
Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E3312SSG

Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E3312SSG is an 8-bit Z8 microcontroller with a 12 MHz clock, 4 KB of one-time-programmable memory organized as 4K x 8, and 24 I/O ports. The device operates from a 4.5 V to 5.5 V supply and is listed as an active part in the Zilog Z86E3312 family. Its combination of OTP program memory, an 8-bit CPU, and a 5 V operating range makes it suitable for embedded control products requiring fixed-program logic and broad I/O access. An 8-bit microcontroller is a compact embedded-processing device that executes firmware from internal program memory and reads inputs through configurable digital ports. The Z86E3312 belongs to the Z8 family, a hierarchy that includes 8-bit microcontrollers, embedded processors, integrated circuits, and semiconductors. Zilog designed this controller for cost-sensitive appliances, access controls, industrial interfaces, and other systems where deterministic digital control is more important than high memory capacity or high-speed computation. The principal device parameters include a 12 MHz maximum clock frequency, 4 KB of OTP program memory, an 8-bit data bus, 24 I/O ports, and a 4.5 V to 5.5 V supply-voltage range. OTP memory allows the application program to be written during manufacturing and prevents subsequent modification, which supports application locking and production traceability. The 24 available I/O lines provide substantial connectivity for switches, sensors, indicators, relays, and communication peripherals. The Z86E3312SSG is identified as part of the Zilog Z8 microcontroller series and uses the SSG ordering code. Distributor records associate the device with the Z86E3312 family and identify its lifecycle as active. Because the detailed package dimensions, pin assignments, interrupt architecture, timer resources, and electrical timing limits are not stated in the cited product records, engineers should use the manufacturer datasheet and its pin-description table before finalizing a PCB layout. Typical uses for this controller include industrial control panels, appliance control boards, security and access-control equipment, programmable logic controllers, and compact instrumentation. In these applications, the 24 I/O ports can distribute control signals across a compact board, while the 12 MHz clock provides sufficient throughput for sequential logic, debouncing, state-machine execution, and periodic interface servicing. OTP programming is particularly appropriate when the finished control logic must remain fixed. The main design consideration is to verify the complete pinout, pin multiplexing, and peripheral assignments against the manufacturer datasheet before PCB routing. Designers should also confirm that every attached signal remains compatible with the 4.5 V to 5.5 V supply range and that firmware timing accounts for the 12 MHz operating limit. A Request a Quote form is available on this page for current commercial availability, lead time, and quantity requirements. This product record combines the exact Z86E3312SSG identity, core electrical and memory characteristics, lifecycle information, practical embedded-control applications, sourcing guidance, and a conservative drop-in assessment. It is designed to help engineers evaluate whether the MCU fits a fixed-program 8-bit design while separating confirmed specifications from details that still require direct manufacturer-document verification.

Permintaan RFG Kontak
Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E3412PSG

Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog, Inc. Z86E3412PSG is an 8-bit CMOS Z8 microcontroller operating at up to 12 MHz, with 16 KB of one-time-programmable program memory in a 28-pin through-hole DIP package. Its operating supply range is 5.00 V to 5.50 V, making it a directly powered embedded-control component for compact legacy-control systems. An MCU, or microcontroller, is a single semiconductor integrating a processor core, program memory, data memory, and peripherals on one die. Within the embedded-control hierarchy, the Z8 family belongs to the broader category of 8-bit microcontrollers and combines a compact instruction set with application-specific peripherals. Its OTP memory makes the device suitable for products where firmware is finalized during manufacturing and field reprogramming is unnecessary. The principal specifications of the Z86E3412PSG are its 8-bit CPU architecture, 12 MHz maximum clock frequency, and 16 KB OTP program memory organized as 16K x 8. The device is identified as a CMOS Z8 microcontroller, while the manufacturer and distributor listings place it in the 28-pin DIP class. These characteristics distinguish it from devices that require external program memory or provide flash-based field updates. The Z86E3412PSG belongs to the Z86E3412 family and is designed for embedded control rather than high-performance computing. OTP program storage gives the manufacturer a defined, permanently programmed firmware path and can support repeatable production across an appliance or controller. The 12 MHz operating rate provides more timing headroom than many low-pin-count 8-bit controllers while retaining the simplicity of a compact MCU architecture. Typical applications include dedicated appliance controllers, small motor-control boards, keypads, sensor-interface modules, and simple sequence controllers. Its 28-pin DIP format is useful for prototypes, repairable assemblies, and through-hole production where a QFP package would be unnecessary. A system designer should verify peripheral assignments, interrupt behavior, and timing requirements against the device's pin description and application information. A critical design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware changes therefore require a new programmed device or a board-level replacement strategy. Decoupling, oscillator layout, I/O drive, and programming should be implemented according to the manufacturer datasheet, especially in electrically noisy motor or relay-control environments. This product page combines the manufacturer device identity with focused design guidance, verified package and memory details, application analysis, and same-family replacement considerations. It is intended to help engineers confirm fit, assess programming constraints, and plan a reliable embedded-control implementation before requesting an order.

Permintaan RFG Kontak
Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog
Z86E3412SSG

Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog

The Zilog Z86E3412SSG is an 8-bit Z8 Z8 One-Time Programmable microcontroller with a 12 MHz clock, 16 KB of OTP program memory organized as 16K x 8, and a 28-pin SOIC package. It is designed for embedded control applications that require a compact 8-bit controller, nonvolatile program storage, and a peripheral-oriented MCU architecture. An 8-bit microcontroller is a microprocessor and embedded-control IC built around an 8-bit processing architecture. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. One-time programmable memory allows firmware to be written once during manufacturing or programming, providing nonvolatile program storage without the removable-program-memory cost of EEPROM. This makes the Z86E3412SSG suitable for fixed-function products whose firmware does not need field updates. The principal device characteristics include a 12 MHz operating frequency, 16 KB of OTP program memory, 8-bit processing, CMOS construction, and a 28-pin SOIC package. The reported operating-temperature range for this exact ordering code is 0°C to +70°C. The part is also identified as Pb-free, although separate RoHS, REACH, and halogen-free declarations were not included in the supplied source data and therefore remain unconfirmed. The 12 MHz clock rate provides the timing headroom expected from a Z8-class embedded controller, while the 16K x 8 OTP organization determines the available program address space. Because the source data does not provide RAM capacity, I/O pin assignments, peripheral inventories, electrical limits, watchdog behavior, or timing characteristics, those details must be confirmed in the manufacturer datasheet before a board design is released. Typical uses include fixed-function industrial controllers, appliance-control panels, small instrument controllers, status interfaces, and embedded control modules where an 8-bit processor and OTP firmware storage are sufficient. Its 28-pin SOIC package also supports conventional surface-mount assembly, but package dimensions, pin geometry, and exposed thermal requirements are not included in the supplied evidence. For new layouts, engineers should verify the complete 28-pin pinout, required decoupling, oscillator connection, programming method, reset requirements, and absolute maximum ratings against the official datasheet. The OTP programming process should also be coordinated with manufacturing because an incorrectly programmed device generally cannot be rewritten like flash memory. This page consolidates the verified distributor listings, an identified same-package family alternative, package constraints, pricing evidence, and engineering-selection guidance. It also clearly separates confirmed Z86E3412SSG facts from electrical and programming details that require manufacturer documentation.

Permintaan RFG Kontak
Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016ASG

Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016ASG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 4 KB of one-time programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, and the device is specified for a 0°C to +70°C ambient temperature range. A microcontroller is an integrated circuit dedicated to executing embedded control software. The Z8 family belongs to the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic-control categories. It combines a processor core, nonvolatile program storage, volatile data memory, digital I/O, and integrated timing functions on one device, allowing compact designs for control, monitoring, and user-interface applications. The Z86E4016ASG provides 4 KB of OTP memory organized as 4K x 8, along with 236 x 8 bytes of RAM. Its 16 MHz operating rate supports efficient sequential instruction execution, while 32 general-purpose I/O pins provide a broad interface for switches, indicators, sensors, actuators, and external logic. Built-in power-on reset and watchdog-timer functions support dependable startup and recovery after a program fault. An internal oscillator simplifies board design by removing the need for an external clock source in a basic configuration. The device combines that oscillator with the Z8 core, OTP program memory, RAM, I/O ports, power-on reset, and watchdog timer in a 44-pin LQFP-44 package. The 10 mm by 10 mm surface-mount format supports compact production assemblies while retaining a generous pin count for mixed-signal and control-oriented products. Typical uses include industrial control panels, appliance controllers, building equipment, simple security systems, digital input/output modules, and compact embedded products. The 32 I/O pins make the device useful where several external switches, indicators, relays, or sensors must be coordinated by a single controller. Applications requiring one-time programmable firmware benefit from the OTP architecture because the finished program cannot be electrically rewritten. When designing a board, confirm every signal against the Z86E4016ASG pin description before assigning PCB tracks. Decoupling requirements, oscillator behavior, reset timing, and unused-pin treatment should follow the manufacturer datasheet. The 3.5 V minimum operating voltage and 5.5 V maximum operating voltage also determine the compatible sensor and actuator interface ranges. This product page consolidates the verified device specifications, sourcing information, engineering-use guidance, and a qualified comparison framework. Because the Z8 family's programming and peripheral configuration are application-specific, engineers should also consult the manufacturer documentation for the complete pin-description table and device operating characteristics.

Permintaan RFG Kontak
Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44
Z86E4016FEC

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Zilog, Inc. Z86E4016FEC is an 8-bit Z8 microcontroller with a 16 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It integrates 32 general-purpose I/O pins, power-on reset, and a watchdog timer for compact embedded-control designs. An 8-bit microcontroller is a programmable integrated circuit designed around an eight-bit processor and a set of dedicated peripherals. Within the embedded-control hierarchy, the Z86E4016FEC belongs to the Z8 family of Zilog microcontrollers and provides a combination of processor throughput, OTP program storage, digital I/O, reset supervision, and watchdog protection in one device. The principal features include 8-bit processing at up to 16 MHz, 4 KB of OTP program memory, and 32 general-purpose I/O pins. Two 8-bit timers are also identified in the verified technical listing. OTP memory provides a permanent on-chip program store, which can be appropriate for cost-sensitive products in which firmware does not require field updates. The device uses the Z8 architecture and is intended for embedded products requiring straightforward digital control rather than high-bandwidth processing. Its 16 MHz operating speed supports control loops, button and sensor handling, indicator updates, and peripheral coordination. The integrated power-on reset and watchdog timer help establish reliable startup behavior and recover from certain software faults. Typical application areas include industrial control panels, appliance controllers, building equipment, simple motor-control interfaces, and dedicated embedded modules. The 44-LQFP package provides 32 general-purpose I/O pins, allowing a design to connect multiple sensors, switches, displays, and actuators while leaving fewer functions to external logic. Design planning should focus on OTP programming timing, available RAM, pin multiplexing, oscillator configuration, and programming-tool compatibility. Because the verified data does not provide a complete pin list, voltage limits, or thermal ratings, those details must be confirmed against the official Zilog documentation before schematic capture or PCB release. This product page consolidates verified distributor specifications, package information, application guidance, and verified sourcing links. It also clearly separates confirmed data from unavailable specifications, helping engineers make sourcing and design decisions without treating unverified electrical details as guaranteed facts.

Permintaan RFG Kontak
Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016FEG

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016FEG is an 8-bit Z8 microcontroller with 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, 32 I/O pins, and a maximum operating speed of 16 MHz. It is housed in a 44-LQFP surface-mount package measuring 10 x 10 mm. The device also includes an internal oscillator, Power-On Reset (POR), and a Watchdog Timer (WDT), providing the core resources for compact embedded control designs. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data. The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence. The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications. The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB. This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.

Permintaan RFG Kontak
Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016PEG

Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog Z86E4016PEG is an 8-bit Z8 CISC microcontroller operating at 16 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 I/O lines in a 40-pin PDIP package. It operates from 4.5 V to 5.5 V and is designed for cost-sensitive embedded control systems requiring a compact peripheral set and deterministic embedded processing. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, I/O ports, and embedded peripherals on one die. The Z86E4016PEG belongs to the Z8 family of 8-bit microcontrollers, a cost-effective architecture widely used for appliance control, industrial interfaces, simple instrumentation, and dedicated automation. Its CISC instruction set is designed for efficient control-oriented code and short development cycles. The device provides 4 KB of OTP program memory, allowing firmware to be programmed once after development. Its 236 x 8 bytes of RAM provide working storage for variables, stack operations, and application data. With 32 I/O lines, the MCU can connect directly to digital sensors, switches, indicator circuits, displays, and external control devices. Integrated Power-On Reset and Watchdog Timer functions support dependable startup and recovery behavior. The 16 MHz operating frequency provides a practical balance between processing throughput, power consumption, and design complexity for embedded control tasks. The internal oscillator eliminates the need for an external clock in applications that do not require precise timing references. The 4.5 V to 5.5 V operating range supports conventional industrial and consumer logic environments, while the 40-pin PDIP package supports conventional through-hole PCB assembly and prototyping. Typical applications include appliance controllers, small motor-control interfaces, digital input/output modules, LED sequencing systems, temperature-control products, and industrial control boards. The 32 available I/O lines make it especially useful when multiple discrete inputs and outputs must be managed without adding another interface IC. Firmware can implement debouncing, state machines, interlocks, fault handling, and communication routines. Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning signals. Because the program memory is OTP rather than rewriteable flash, firmware changes after programming require a different device and a complete replacement. Decoupling, grounding, and reset circuitry should follow the datasheet layout recommendations, and unused I/O pins should be assigned deliberately rather than left without a defined state. This product page combines the Z8 microcontroller specifications, verified package and memory information, same-package replacement references, application guidance, and design considerations. It is intended to help engineers evaluate firmware fit, pin compatibility, OTP programming constraints, and PCB assembly requirements before selecting the Z86E4016PEG.

Permintaan RFG Kontak
Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016PSG

Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016PSG is an 8-bit Z8 microcontroller with a 16 MHz maximum clock frequency and 4 KB of one-time-programmable program memory. It is packaged in a 40-pin through-hole dual inline package and is positioned for cost-sensitive, high-volume embedded control applications. The device combines a Z8 CPU core with 236 bytes of data RAM and operates as a compact embedded controller for consumer, automotive, security, and HVAC equipment. The Z86E4016PSG is designed around one-time-programmable memory, which allows the final firmware image to be written during manufacturing and removes the need for external reprogrammable flash. Its 4 KB program memory is intended for compact control loops, keypad and panel management, sensor conditioning, actuator control, and simple protocol handling. The 16 MHz clock provides adequate processing headroom for deterministic control functions without requiring a high-pin-count package. Important device characteristics include the Z8 CPU architecture, 236 bytes of data RAM, 4 KB OTP program memory, and a 40-DIP package. The Z8 family is intended for applications where cost, simplicity, and compact control are more important than high-capacity firmware storage or extensive connectivity. The through-hole package also supports conventional through-hole PCB assembly and is suitable for designs using socketed or manually assembled boards. Typical application areas include consumer appliances, automotive accessory modules, security and access-control equipment, HVAC controllers, and small industrial control panels. The Z86E4016PSG is especially useful when the control algorithm is stable and the product can be programmed once during production. Designers should plan the firmware size carefully because OTP memory cannot be rewritten, and should use the manufacturer pin-description table when assigning PCB tracks and I/O functions. For new designs, check the manufacturer datasheet for electrical limits, clock configuration, port behavior, and programming details before layout release. This page combines verified distributor listings, the manufacturer datasheet reference, package information, and practical selection guidance for engineers evaluating a 40-pin 8-bit OTP controller.

Permintaan RFG Kontak
Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016VSG

Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016VSG is an 8-bit Z8 microcontroller with 16 MHz clock speed, 4 KB of one-time-programmable ROM, 32 I/O lines, and a PLCC-44 surface-mount package. The device operates from a 4.5 V to 5.5 V supply and is intended for embedded control applications requiring an 8-bit data bus and compact peripheral integration. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication interfaces on one integrated circuit. The Z86E4016VSG belongs to the Z8 Classic family of 8-bit embedded processors. It is positioned between general-purpose microcontrollers and larger 16-bit or 32-bit control platforms, providing sufficient performance for appliance controls, industrial interfaces, instrumentation, and embedded peripheral control. The principal specifications are a 16 MHz clock speed, 4 KB of OTP program memory, 236 bytes of RAM, and 32 I/O lines. The 8-bit bus architecture simplifies connection to common peripherals, while the 44-pin PLCC package provides a substantial lead count for digital input/output functions and control signals. Programmable OTP options include an RC oscillator, EPROM protection, and automatic latch disable, as identified in the manufacturer family information. The Z8 architecture is designed for compact embedded control rather than high-throughput computing. Its 8-bit data path and 16 MHz operating clock are well suited to sequential control logic, signal conditioning, keypad and switch scanning, lamp or relay control, and communication-interface peripherals. Because program memory is one-time-programmable, the device is appropriate for production designs where a fixed firmware image is assigned during manufacturing. Typical uses include industrial control modules, test and measurement equipment, appliance controllers, building-control interfaces, and compact embedded systems. The PLCC-44 package also supports socket-based prototypes and serviceable assemblies, while a surface-mount implementation provides a compact permanent PCB footprint. The 4.5 V to 5.5 V supply range supports conventional 5 V logic systems. Designers should verify oscillator, timing, reset, and port requirements against the Z86E40 family documentation before schematic capture. OTP programming must be planned as a manufacturing step, and the permanent-programming decision should be reviewed against field-update requirements. The 44-pin PLCC footprint should also be checked for thermal performance and assembly compatibility. This product page consolidates the device specifications, verified source links, package characteristics, application guidance, and drop-in replacement status. It also distinguishes electrically similar devices that use different packages, preventing a footprint mismatch from being mistaken for a PCB-compatible replacement.

Permintaan RFG Kontak
Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44
Z86E4312ASG

Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44

The Zilog Z86E4312ASG is an 8-bit Z8 microcontroller rated at 12 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and a 44-lead LQFP package measuring 10 mm by 10 mm. It operates from 3.5 V to 5.0 V and integrates 32 I/O lines, six interrupt sources, two timers, two comparators, a watchdog timer, power-on reset, and low-voltage protection. An 8-bit microcontroller is a compact processor designed to execute embedded control instructions, read sensor inputs, update outputs, and manage communication or timing functions. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and programmable control semiconductors. Its one-time-programmable memory permits a finished device to be programmed once for its intended control application. The principal features of the Z86E4312ASG support space-constrained control systems requiring a moderate amount of program memory. Its 12 MHz operating speed provides processing capacity for sequential control tasks, while 32 I/O lines offer substantial connectivity for switches, indicators, sensors, actuators, and external bus devices. Six interrupts and two timers support event-driven operation, while the watchdog timer helps recover the controller after faults. The Z86E4312ASG also includes two analog comparators, power-on reset, and low-voltage protection. These resources reduce the need for separate peripheral devices in suitable systems. The EBI/EMI interface provides a route for external bus communication, allowing the controller to work with additional memory or peripheral circuits when the application requires more connectivity than the general-purpose I/O pins provide. Typical uses include industrial control panels, appliance controllers, small motor-control boards, security and access-control units, instrumentation, and embedded products with multiple discrete inputs and outputs. Its 4 KB OTP program memory is most appropriate for compact control loops, state machines, product selection logic, and supervisory functions rather than resource-intensive connectivity or graphics processing. When designing around this device, verify the 3.5 V to 5.0 V operating range against every external circuit and signal level. Treat the 236 bytes of RAM as a strict working-memory budget, and assign program memory carefully because OTP cannot be rewritten. PCB planning should preserve access to all 44 LQFP leads and provide suitable decoupling and signal-routing margins. This product page combines the Z86E4312ASG electrical specifications, package information, application guidance, design considerations, and a parameter-level comparison with closely related Zilog controllers. It is intended to help engineers assess memory, clock speed, package fit, peripheral requirements, and replacement strategy before releasing a production schematic or PCB design.

Permintaan RFG Kontak
Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control
Z86E4312FSC

Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control

The Zilog Z86E4312FSC is an 8-bit CMOS Z8 OTP microcontroller rated for operation up to 12 MHz, with 4 KB of one-time-programmable program memory and a 44-LQFP package measuring 10 mm by 10 mm. The device is positioned for compact embedded-control designs that require deterministic peripheral integration and application-specific programming rather than field-upgradeable firmware storage. A microcontroller is the central control element of an embedded system. It executes firmware, reads inputs, updates outputs, and coordinates connected peripherals. The Z8 family combines an 8-bit processor architecture with OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. OTP memory is programmed once during manufacturing or board assembly and cannot subsequently be erased or rewritten. The Z86E4312FSC combines a 12 MHz maximum operating frequency with 4 KB of OTP program memory. A secondary listing identifies 237 bytes of RAM, 24 I/O lines, and two 8-bit timers, while the product description identifies the device as a 4 KB, 12 MHz Z8 microcontroller. These characteristics make the part suitable for compact control products with modest code requirements and multiple digital interfaces. The device uses CMOS technology and is offered in a 44-LQFP surface-mount package. A 10 mm by 10 mm footprint supports compact PCB layouts but requires careful routing between its fine-pitch leads. Its listed I/O quantity and dual timer arrangement can reduce the need for external peripheral components in control, measurement, and actuator-interface systems where the application fits within the available program-memory capacity. Typical applications include industrial keypad and panel controllers, compact instrumentation, appliance control modules, programmable timers, and dedicated interface controllers. OTP programming is particularly appropriate for products whose firmware and configuration are fixed before deployment. For designs requiring field updates, the OTP limitation should be weighed against a controller using rewritable program memory. PCB design should preserve a clean return path around the clock, oscillator, reset, and power pins. Follow the manufacturer’s pin-description table and recommended application circuit when assigning tracks, placing bypass capacitors, and configuring the external crystal or clock source. This product record combines the exact Z86E4312FSC ordering information with package, memory, speed, and interface characteristics. It also highlights programming constraints, verified replacement status, and design considerations that help engineers determine whether this Z8 OTP microcontroller fits the target control system.

Permintaan RFG Kontak
Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog
Z86E4312FSG

Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog

Zilog Z86E4312FSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating speed, 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10 x 10 mm surface-mount package. It operates from a 3.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient temperature range. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The Z8 family belongs to the 8-bit microcontroller hierarchy and provides a compact control platform for embedded products. Z86E4312FSG also supports EBI/EMI connectivity, Power-On Reset, and a Watchdog Timer, allowing it to supervise and control peripheral circuitry in compact industrial or consumer equipment. The device provides 4 KB organized as 4K x 8 bits of OTP program memory and 236 x 8 bits of RAM. Its internal oscillator eliminates the need for an external clock source in designs that can use the specified operating frequency. The 32 I/O pins provide substantial parallel interface capacity, while the 3.5 V to 5.5 V operating range suits conventional 5 V embedded-control equipment. The 44-LQFP package also supports programmed and PCB-manufactured production methods. The Z8 architecture targets straightforward embedded control, including digital input evaluation, output sequencing, timing, and communication. EBI/EMI connectivity expands the available interface options for external memory or related bus-connected functions. Power-On Reset establishes a controlled startup state, while the Watchdog Timer helps recover from unintended program stalls. These integrated resources reduce the number of external support components required for basic embedded-control designs. Typical uses include industrial automation controllers, appliance-control modules, instrumentation interfaces, and compact consumer products. The 32 I/O pins are particularly useful for keypad scanning, display-control signals, relay or switch inputs, status indicators, and external bus connections. The internal oscillator makes the MCU appropriate for cost-sensitive systems where an accurate external time base is not required. Designers should verify every electrical limit and pin function against the manufacturer datasheet before layout is released. OTP program memory is one-time programmable, so firmware validation must occur before programming. Decoupling, grounding, and exposed-pad layout should follow the datasheet recommendations. Because no verified pin names or detailed electrical limits were supplied, the package pinout and several implementation-specific values are intentionally left unresolved rather than guessed. This page combines the verified 12 MHz, 4 KB OTP, 236 x 8-bit RAM, 32 I/O, supply-voltage, temperature, and 44-LQFP specifications with practical application guidance. It also distinguishes the verified same-family alternative and identifies where additional datasheet information is required for a production release.

Permintaan RFG Kontak
Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog
Z86E4312PSG

Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog

The Zilog Z86E4312PSG is an 8-bit Z8 OTP microcontroller with a 12 MHz maximum clock, 4 KB of one-time-programmable program memory, 236 bytes of data RAM, and 32 I/O lines in a 40-pin through-hole DIP package. It operates from 3.5 V to 5.5 V and is built with CMOS technology for compact control applications. Its 4K x 8 OTP architecture allows the application firmware to be programmed once, making the device suitable for fixed-function products where field updates are not required. A microcontroller is a programmable control IC that integrates a CPU core, memory, I/O ports, clock circuitry, and reset functions onto one semiconductor device. The Z8 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for reading inputs, executing embedded control logic, and driving outputs. Compared with a discrete logic implementation, it reduces component count, simplifies firmware-based sequencing, and provides deterministic behavior within a defined operating range. Key features of the Z86E4312PSG include 12 MHz maximum operation, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 40-DIP package. The 32 available I/O lines provide substantial connectivity for keypads, displays, sensors, relays, status indicators, and general-purpose digital control. The on-chip oscillator accepts a crystal, ceramic resonator, LC, RC, or external clock source, giving the designer flexibility in clocking and cost control. The device uses the Zilog Z8 core and CMOS process technology. OTP program memory removes the need for a separate nonvolatile memory component, while internal RAM supports stack, variable, and working-data requirements. Because program memory cannot be rewritten after programming, designers should validate firmware and the complete production programming procedure before committing a device population to an assembly line. Typical uses include appliance controllers, small motor-control boards, keyboard and panel interfaces, lighting controllers, industrial sequence modules, and dedicated embedded-control products. The 40-pin through-hole package is particularly convenient for prototypes, through-hole assembly, and designs where a socketed or manually serviced controller is preferred. The broad I/O count also suits designs that combine several discrete sensors and actuators around one central controller. When laying out a board, place the clock components and decoupling capacitors close to their associated pins and route sensitive oscillator signals away from high-current switching nodes. Confirm that the selected oscillator source satisfies the device timing requirements and validate the complete firmware with the final clock configuration. Because the memory is one-time programmable, treat firmware validation and programming as production-gating steps rather than routine board-test activities.

Permintaan RFG Kontak
Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog
Z86E4312VSG

Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog

The Zilog Z86E4312VSG is an 8-bit Z8 Z8 series microcontroller with a 12 MHz maximum clock frequency and 4 KB (4K x 8) of one-time-programmable flash program memory, packaged in a 44-pin J-lead plastic leaded chip carrier (44-LCC) surface-mount package. It is a compact 8-bit MCU suited to cost-sensitive control, measurement and appliance-type products. A microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, timers, serial ports and I/O pins on one die. The Z8 family from Zilog targets embedded control applications where a small, low-cost device must sequence relays, read sensors, drive displays and manage simple communication links. Within the broader semiconductor hierarchy, this device belongs to the microcontroller -> 8-bit MCU -> embedded controller class, and to the power-and-control tier of the device tree rather than to analog or power-semiconductor segments. Key features of this device include 32 configurable I/O lines, an 8-bit internal data bus, and a 4 KB user program area implemented as OTP, meaning the application code is written once and cannot be erased or re-programmed. Supply voltage operation spans 3.5 V to 5.5 V, so the part fits both 5 V legacy systems and 3.3 V-only designs at the lower end of the range. The device also includes an on-chip oscillator, timers and serial communication resources that reduce the external component count of a typical controller board. Technically, the Z86E4312 sits in the Zilog Z86E4x12 sub-family, which pairs a 12 MHz core with a 4 KB OTP memory map. Because program memory is mask-programmable OTP rather than flash, designers must finalize firmware before production and cannot apply field updates through a bootloader, which is the central architectural trade-off of this family. Industrial temperature grading of 0 degrees C to +70 degrees C is specified for the VSG ordering code, and the part is delivered in a surface-mount 44-LCC package that is directly soldered to the board rather than socketed. Typical uses include building-block controller boards, motor and relay sequencers, security keypad scanners, small instrumentation front panels, temperature-control loops in appliances, and LED signage drivers. Because the device provides 32 I/O pins, one Z86E4312 can replace several discrete logic ICs and a separate driver array in a compact enclosure. When laying out the board, route the 44-LCC pads on a compatible PLCC footprint, provide decoupling close to the supply pins, and keep the OTP programming interface accessible until the code is finalized. Also note that OTP parts are ordered against a fixed firmware image, so schedule programming and mask ordering early in the development cycle. This page consolidates the device characteristics, package and mounting details, drop-in replacement options within the same 44-LCC footprint, and practical design guidance so that a design team can decide quickly whether the Z86E4312VSG fits the control task and how to qualify an alternative if sourcing needs change.

Permintaan RFG Kontak
Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E4412PSG

Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog Z86E4412PSG is an 8-bit Z8 embedded microcontroller with a 12MHz core, 16KB of one-time-programmable program memory, and 236 bytes of RAM in a 40-pin PDIP package. The device integrates Power-On Reset, a Watchdog Timer, and EBI/EMI connectivity, making it suitable for cost-sensitive embedded control systems that require deterministic peripheral access and compact code storage. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The Z8 MCU family belongs to the broader embedded-controller hierarchy, where an 8-bit MCU provides efficient control for sensors, actuators, human-interface circuits, and industrial equipment. Unlike field-programmable Flash memory, the Z86E4412PSG uses OTP memory, so its application program is permanently committed during device programming. Key features include a 12MHz operating frequency, 16K × 8 organization for the 16KB OTP program memory, and 236 × 8 bytes of RAM. The integrated Power-On Reset helps establish a known initial controller state, while the Watchdog Timer provides a mechanism for recovering from stalled software execution. EBI/EMI expands the available external interface resources for communicating with additional memory or peripheral devices. The Z86E4412PSG uses an 8-bit architecture optimized for embedded control rather than high-throughput computation. Its 12MHz clock provides the execution rate for supervisory loops, status monitoring, and basic user-interface tasks. The 236-byte RAM supports working variables and stack operations, although complex buffering or protocol stacks may require an external memory device connected through the external bus interface. Typical uses include industrial control panels, building equipment, security and access peripherals, appliance controllers, motor-control interfaces, and compact embedded sensing systems. The 40-pin PDIP package is particularly useful for prototypes, through-hole industrial assemblies, and designs where a socketed controller simplifies replacement or inspection. The primary design consideration is OTP programming. Engineers should validate the complete firmware and all configuration bytes before programming because OTP memory cannot be rewritten, and they should verify external-bus timing and peripheral assignments against the manufacturer datasheet. Supply voltage, pin-specific limits, oscillator requirements, and programming procedures are not available in the supplied source excerpts and must be confirmed from the manufacturer datasheet. This page consolidates verified distributor and manufacturer-related source information, compares the available documented substitute, and identifies missing electrical data explicitly. It is intended to support engineering selection while preventing unverified voltage, pinout, pricing, and lifecycle assumptions from being presented as facts.

Permintaan RFG Kontak
Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E6116FSC

Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

The Zilog Z86E6116FSC is an 8-bit Z8 microcontroller operating at 16 MHz, with 16 KB of one-time-programmable program memory, 236 bytes of RAM, UART capability, and a 44-pin LQFP package measuring 10 mm by 10 mm. Its OTP program memory makes the device suitable for compact production designs in which the finished controller code must not be reprogrammed. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one chip. Within the product hierarchy, this device belongs to the Z8 family of 8-bit microcontrollers and belongs broadly to the integrated-circuit and embedded-controller categories. Z8 devices combine a compact processor architecture with dedicated I/O and serial-interface resources for cost-sensitive embedded control. The verified device data identifies a 16 MHz operating clock, 16 KB of OTP program memory organized as 16K by 8 bits, and 236 bytes of general-purpose RAM. The listing also identifies a UART interface, making the MCU suitable for designs that need a simple serial communications channel. Its 44-LQFP package provides a higher pin count than a basic 8-bit controller and supports more external connections in a surface-mount production PCB. The Z8 architecture is designed for embedded-control workloads where modest processing throughput is sufficient. Program storage is one-time-programmable rather than mask-programmable or electrically reprogrammable, which can simplify production control by preventing accidental changes after programming. The 16 MHz operating rate supports time-based control, input scanning, state-machine logic, and communication routines without requiring a higher-bit-class processor. Typical uses include appliance controllers, small industrial automation modules, instrument panels, communication interfaces, and embedded peripheral controllers. The UART is particularly relevant where an external host computer, display, sensor interface, or service connector uses a serial link. Engineers should confirm the exact peripheral pin multiplexing, electrical limits, timing characteristics, and programming procedure against the manufacturer datasheet before finalizing a PCB or firmware. One important design consideration is that OTP memory cannot be revised after programming. Firmware validation, programming-file control, and assembly-line traceability therefore need to be planned before deployment. Supply voltage, clock tolerances, I/O limits, reset behavior, and absolute maximum ratings are not present in the supplied excerpts and must be verified in the complete manufacturer datasheet. This product page consolidates the verified distributor specifications, package information, sourcing links, family relationships, and engineering cautions for Z86E6116FSC. It also distinguishes confirmed technical facts from unavailable details and avoids presenting unverified pricing, pin assignments, or drop-in replacements as authoritative.

Permintaan RFG Kontak
Z86E6116FSG - 16MHz Z8 MCU, 16KB OTP | Zilog
Z86E6116FSG

Z86E6116FSG - 16MHz Z8 MCU, 16KB OTP | Zilog

Zilog Z86E6116FSG is an 8-bit Z8 Z8-series microcontroller operating at 16MHz, with 16KB of one-time-programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10x10 mm surface-mount package. The device also includes a UART/USART for serial connectivity, making it suitable for compact embedded-control and communications designs. An 8-bit microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on one chip. The Z86E6116FSG belongs to the Z8 family, where its compact instruction set, dedicated I/O resources, and integrated serial interface support deterministic control of embedded products. Its 16MHz operating speed provides the timing capability needed for protocol handling, input scanning, and actuator control. The principal feature set includes 16KB of OTP program memory, 236 x 8 bytes of RAM, 32 general-purpose I/O pins, and one UART/USART interface. OTP memory permits a finished program to be written permanently, which can help prevent accidental firmware changes in production equipment. The 32 I/O pins provide substantial host connectivity for switches, indicators, sensors, and control signals without requiring a separate external I/O expander. Its 5V operating context and 16MHz clock position the device as a compact embedded-control solution. The UART/USART allows a controller to exchange framed serial data with another processor, transceiver, or service interface, while the general-purpose I/O pins handle discrete peripherals. Since program memory is OTP rather than reprogrammable Flash, firmware development and update strategy must account for the permanent nature of the programmed contents. Typical applications include serial-controlled instrumentation, industrial control modules, keypad and display interfaces, programmable logic controllers, building-control endpoints, and compact communications equipment. The combination of 32 I/O pins, serial connectivity, and 16KB of program storage is useful when the design needs a dedicated controller rather than a high-performance processor. PCB design should account for all 44 package leads, correct decoupling near the supply pins, and clean routing of the 16MHz clock and serial signals. The 10x10 mm LQFP footprint is relatively compact, but its fine-pitch leads still require careful fanout, solder mask design, and inspection under magnification. This product page consolidates the device identity, package details, technical constraints, sourcing workflow, and engineering guidance into one reference. It also distinguishes verified drop-in replacements from merely similar microcontrollers, helping designers avoid changes that would require new PCB artwork, firmware revision, or peripheral revalidation.

Permintaan RFG Kontak
Z86E6116PSG - 8-Bit 16MHz 16KB OTP MCU | Zilog
Z86E6116PSG

Z86E6116PSG - 8-Bit 16MHz 16KB OTP MCU | Zilog

The Zilog Z86E6116PSG is an 8-bit Z8 microcontroller operating at 16 MHz with 16 KB of one-time-programmable memory in a 40-pin DIP package. It is designed for embedded control applications that require deterministic serial communication, compact logic integration, and a straightforward through-hole footprint. The device operates from a 4.5 V to 5.5 V supply and includes a UART, making it suitable for serial control panels, industrial controllers, instrument interfaces, and embedded automation modules. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral interfaces into one device. The Z8 belongs to Zilog's 8-bit microcontroller family, positioned between simple fixed-function logic controllers and more complex 16-bit or 32-bit processors. Its 16 KB OTP program memory allows firmware to be programmed once for stable production configurations without external program-memory components. The Z86E6116PSG combines an 8-bit architecture with a 16 MHz clock, 16 KB of OTP memory, and a UART interface. The 40-pin DIP package supports conventional through-hole assembly and breadboard or prototype-board prototyping. A 4.5 V to 5.5 V operating range covers standard 5 V control systems, while the UART permits connection to host computers, sensors, display controllers, and other digital equipment. The Z8 architecture is intended for embedded control rather than high-throughput computing. Program and data storage operate from a compact memory arrangement that keeps external component count low. The UART provides a practical communications path for configuration, telemetry, and command processing, while the 16 MHz clock supports predictable execution of real-time control loops in cost-sensitive designs. Typical uses include industrial control panels, instrumentation interfaces, keypad and display controllers, serial data acquisition modules, appliance controls, and small automation subsystems. The DIP package is especially useful for designs assembled through holes or assembled with conventional leaded components rather than fine-pitch surface-mount techniques. When designing around the Z86E6116PSG, confirm the oscillator arrangement, reset behavior, UART levels, and port-drive requirements against the manufacturer datasheet. Validate firmware with the intended 5 V supply tolerance and keep the board layout within the package's thermal and electrical recommendations. This page also organizes package details, interface specifications, replacement considerations, and application guidance for faster component selection.

Permintaan RFG Kontak
Z86E6116VSG - 8-Bit 16MHz 16KB OTP MCU | Zilog
Z86E6116VSG

Z86E6116VSG - 8-Bit 16MHz 16KB OTP MCU | Zilog

The Zilog Z86E6116VSG is an 8-bit Z8 microcontroller operating at up to 16 MHz with 16 KB of one-time-programmable flash memory and a UART interface, housed in a 44-pin PLCC package. It is designed for cost-sensitive embedded control applications that require deterministic 8-bit processing, on-chip nonvolatile program storage, and serial communications without an external EEPROM. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, and peripheral functions into one package. The Z86E6116VSG belongs to the Z8 microcontroller family, a hierarchy of 8-bit embedded controllers positioned between simple logic controllers and higher-performance 32-bit microcontrollers. Its integrated UART allows the controller to communicate with sensors, displays, transceivers, or host systems over serial interfaces. Key characteristics include a 16 MHz maximum operating frequency, 16 KB of OTP program memory, 8-bit processing, a UART peripheral, and a supply voltage range of 4.5 V to 5.5 V. The commercial temperature grade covers 0 °C to +70 °C, making the device suitable for indoor instruments, industrial controls, appliance controllers, and communication modules that operate within that range. The device uses one-time-programmable memory, so firmware is written after programming and cannot be updated in the field. This architecture is useful for products whose firmware and configuration are fixed at manufacturing, including dedicated controllers, interface modules, metering equipment, and embedded communication products. Designers should also account for the fact that OTP devices cannot be reflashed during production corrections. Typical applications include serial interface controllers, automated test equipment, instrumentation, industrial keypad panels, motor-control support circuits, and embedded UART bridge products. Its 44-pin PLCC package provides a higher pin count than small-outline packages, supporting legacy peripheral routing and through-hole or socket-compatible assembly strategies where appropriate. When designing a PCB around the Z86E6116VSG, verify the PLCC footprint, pin assignments, oscillator requirements, and reset behavior against the Zilog datasheet. Because OTP memory cannot be revised, validate the complete firmware image and production programming procedure before committing the design to volume production. This page organizes the controller's verified electrical, memory, package, and environmental characteristics together with application guidance, design cautions, and cross-reference information. It is intended to help engineers evaluate whether the Z86E6116VSG architecture, memory strategy, package, and operating limits fit a specific embedded control design.

Permintaan RFG Kontak
Z86E6316FSG 16MHz 8-Bit 32KB OTP MCU | Zilog
Z86E6316FSG

Z86E6316FSG 16MHz 8-Bit 32KB OTP MCU | Zilog

The Zilog Corporation Z86E6316FSG is an 8-bit Z8 microcontroller with a 16 MHz processor, 32 KB of one-time programmable program memory, and 236 bytes of SRAM in a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It supports UART communication and is designed for embedded control systems requiring deterministic serial connectivity, one-time programmable firmware, and a compact 44-pin footprint. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals on one IC. The Z8 belongs to the 8-bit microcontroller hierarchy, where each instruction operates on an 8-bit data unit. Within that class, the Z86E6316FSG combines OTP program storage with serial communications for appliances, industrial controllers, access equipment, and other embedded products. Key device characteristics include the 16 MHz operating frequency, 32 KB organized as 32K by 8 bits, and 236 bytes of SRAM. Its one-time programmable architecture allows firmware to be permanently configured before deployment, which is useful for production products whose final firmware is programmed at manufacturing. The UART interface provides a practical path for connecting the controller to sensors, transceivers, programmers, and service equipment. The Z86E6316FSG is manufactured in CMOS technology and uses a 44-LQFP package with a 10 mm by 10 mm body size. Its 8-bit architecture is intended for control-oriented tasks rather than intensive computation, networking stacks, or high-resolution signal processing. Program development should account for the one-time programming constraint by validating the complete firmware image before the device is programmed. Typical applications include UART-connected appliance controllers, access-control terminals, industrial interface modules, and embedded instrumentation. In each case, the MCU can collect inputs, execute a fixed control routine, and exchange status or configuration data over UART. Designers should confirm peripheral assignments and timing requirements against the manufacturer product specification before finalizing PCB connections. Keep programming and UART interfaces accessible for manufacturing and service, and reserve sufficient board area for the 44-pin LQFP land pattern. Because OTP memory cannot normally be erased and rewritten, use a controlled programming workflow with firmware validation and configuration records. This page consolidates the core specifications, replacement guidance, and application-focused design considerations for faster component evaluation.

Permintaan RFG Kontak
Z86E6316PSG - 16MHz 8-Bit 32KB OTP MCU | Zilog
Z86E6316PSG

Z86E6316PSG - 16MHz 8-Bit 32KB OTP MCU | Zilog

The Zilog Z86E6316PSG is an 8-bit Z8 Z8 series CMOS microcontroller with a 16 MHz operating frequency, 32 KB of one-time-programmable ROM, 236 bytes of RAM, and a UART peripheral. It is packaged in a 40-pin PDIP and is designed for embedded control, serial communications, and legacy industrial applications. The 32 KB OTP program memory supports fixed firmware after programming, while the integrated UART simplifies asynchronous serial communication with host equipment. An 8-bit microcontroller is a compact computing device that integrates a CPU, program memory, data memory, and peripherals on one semiconductor die. Within the embedded-control hierarchy, this device is an MCU, a microcontroller, and ultimately a semiconductor-based embedded processor. The Z8 architecture combines a simple instruction set with dedicated peripherals, making it suitable for controllers that perform sequencing, measurement, and communications without requiring a high-performance CPU. Key characteristics include the 16 MHz maximum clock, 32 KB of OTP program memory, 236 bytes of internal RAM, CMOS construction, and an on-chip UART. One-time-programmable memory is appropriate for production firmware because the finished program cannot be rewritten, which can help prevent unauthorized modification. The DIP-40 package also supports through-hole assembly and straightforward prototyping on perforated boards or conventional through-hole PCBs. The device is intended for compact embedded controllers where one-time programmable memory, a UART, and a simple 8-bit architecture are more valuable than flash reprogramming or high-speed arithmetic. Its 32 KB program capacity allows substantially larger firmware than many small 8-bit controllers, supporting protocol handling, state-machine logic, keypad scanning, sensor conditioning, and actuator control within a single device. Typical uses include industrial equipment interfaces, serial-to-discrete control panels, instrumentation controllers, motor and relay sequencing, appliance control modules, and communication adapters. In each case, the UART provides a straightforward path to a host controller or external system, while the OTP memory provides permanent program storage. Design planning should begin with the Z86E63 series datasheet pin description and electrical characteristics. Confirm the operating voltage range, oscillator configuration, timing requirements, and reset behavior against the exact production datasheet before schematic release. Because the package uses through-hole leads, also verify board spacing, connector accessibility, and whether the assembled system needs a socket for field replacement. This page consolidates the verified product identity, package information, price-break listing, pinout reference, and practical design guidance for engineers evaluating the Z86E6316PSG for new and replacement designs.

Permintaan RFG Kontak