Produk (21.000+)

STM8S207K6T6 - 24MHz 8-bit MCU, 32KB Flash | STMicroelectronics
STM8S207K6T6

STM8S207K6T6 - 24MHz 8-bit MCU, 32KB Flash | STMicroelectronics

The STM8S207K6T6 is a performance-line 8-bit microcontroller from STMicroelectronics, featuring a 24 MHz STM8 core with up to 32 Kbytes of Flash program memory. It integrates 2 Kbytes of data EEPROM, a 10-bit ADC, multiple timers, two UARTs, SPI, I²C, and CAN interfaces, all in a 32-pin LQFP package. This MCU is designed for cost-sensitive industrial and consumer applications requiring robust communication and control capabilities. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals (timers, ADC, communication interfaces) on one die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, simpler architecture, and lower power consumption, making it ideal for control-oriented tasks like motor control, sensor interfacing, and human-machine interfaces. The STM8S207K6T6 belongs to the STM8S20xxx performance line, which balances performance and peripheral richness for mid-range embedded applications. Key features include a 24 MHz CPU clock, 32 Kbytes of Flash, 2 Kbytes of RAM, 2 Kbytes of EEPROM, a 10-bit ADC with up to 10 channels, two 16-bit timers, one 8-bit timer, two UARTs, SPI, I²C, and a CAN 2.0B controller. The device operates from 2.95V to 5.5V, making it suitable for 3.3V and 5V systems. It also features a low-power mode with typical current consumption of 5.4 mA at 24 MHz, and a halt mode with 1.5 µA typical current. The STM8S207K6T6 uses a Harvard architecture with a 3-stage pipeline, achieving up to 20 MIPS at 24 MHz. It includes an embedded debug module (SWIM) for in-circuit debugging and programming, and a single-wire interface for firmware updates. The CAN controller supports CAN 2.0B active mode, enabling robust industrial networking. The device is manufactured using ST's proprietary 130nm process, balancing performance and power efficiency. Typical applications include industrial control systems, home appliances, automotive body electronics (non-safety), sensor nodes, and communication gateways. The CAN interface makes it particularly suitable for automotive and industrial CAN bus networks, while the multiple UARTs and SPI/I²C support diverse peripheral connectivity. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the pins. The SWIM pin should be pulled up with a 10kΩ resistor for reliable programming. For CAN applications, an external CAN transceiver (e.g., TJA1050) is required, and the bus termination resistor should be 120Ω at each end of the CAN bus.

Permintaan RFG Kontak
STM8S207K6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S207K6T6C

STM8S207K6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S207K6T6C is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 32 KB of Flash program memory, and a 32-pin LQFP package. It combines an advanced STM8 CISC core with integrated EEPROM, a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN interfaces. The device operates from a 3.3 V or 5 V supply, making it suitable for embedded control, communications, sensing, and industrial automation systems. An 8-bit microcontroller is a compact programmable controller that integrates a CPU, memory, and peripheral interfaces into one semiconductor package. The STM8S207 belongs to the STM8 performance line, a branch of the STM8 8-bit MCU family within the broader embedded-controller and semiconductor hierarchy. Its Harvard-style memory organization separates program execution from data access, supporting efficient control-loop operation while allowing firmware and working data to use separate memory spaces. The STM8S207K6T6C reaches 24 MHz with zero wait states at 16 MHz, according to the manufacturer documentation. Its 32 KB Flash capacity provides room for application firmware, while integrated EEPROM supports nonvolatile parameter storage. The 10-bit ADC permits analog measurements, and the two UARTs, SPI, I²C, and CAN interfaces support multiple communication topologies without requiring entirely separate serial controller ICs. A broad timer complement is useful for periodic tasks, motor timing, input capture, and pulse-width-related control. The advanced STM8 core uses a Harvard architecture and a three-stage pipeline, balancing predictable interrupt-driven behavior with modest instruction-level parallelism. This architecture is particularly effective in real-time embedded designs where deterministic peripheral servicing is more valuable than maximum software throughput. On-chip communications and analog conversion also reduce board complexity and help preserve package space in compact controllers. Typical uses include industrial sensor nodes, CAN-connected equipment, motor-control peripherals, keypad interfaces, building-control modules, and compact communication bridges. The CAN and RS-485-oriented UART resources are useful for industrial networking, while SPI and I²C suit sensors, displays, memory devices, and board-level expansion. The 32-pin LQFP is easy to assemble and inspect during prototype rework. PCB design should preserve clean decoupling around VDDA and VSSA, route high-current and communication interfaces away from sensitive analog inputs, and provide test access to reset and programming signals. Confirm the exact clock, reset, and peripheral-pin assignments in the manufacturer pin-description table before final routing because firmware configuration determines which functions can be assigned to a given pad. This product page consolidates the core device characteristics, same-family replacement options, interface-level application guidance, and practical PCB considerations. It supports faster component selection by organizing clock, memory, analog, communications, package, and substitution information in one engineering-oriented reference.

Permintaan RFG Kontak
STM8S207K8T6C - 24MHz 64KB 8-Bit MCU | STMicroelectronics
STM8S207K8T6C

STM8S207K8T6C - 24MHz 64KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207K8T6C is a 24 MHz 8-bit STM8S performance-line microcontroller with 64 KB of Flash program memory in a 32-pin LQFP package. The device combines an integrated EEPROM, a 10-bit ADC, two UART interfaces, SPI, I2C, CAN, and timer resources for compact embedded control designs. An STM8S performance-line microcontroller belongs to the 8-bit MCU hierarchy and provides economical control for industrial equipment, communications modules, motor-control subsystems, and consumer products. Unlike application-specific controllers, the STM8S207K8T6C integrates programmable digital interfaces and analog conversion in one device, allowing a compact design to handle sensing, communications, timing, and actuator control without requiring a separate host processor. The 24 MHz clock supports faster instruction execution than many entry-level 8-bit MCUs, while the 64 KB Flash configuration provides room for a larger application program than the smallest STM8 devices. Integrated EEPROM supports nonvolatile parameter storage, and the 10-bit ADC enables direct analog measurement. Two UARTs, SPI, I2C, and CAN provide options for sensor access, external peripherals, data logging, and network-connected equipment. The STM8S207K8T6C belongs to the STM8S20xxx performance line, which supports devices from 32 to 128 KB of Flash. Its 32-pin LQFP package exposes the MCU's GPIO, communication, timer, debug, reset, clock, and power functions on a conventional leaded surface-mount footprint. This package is easier to inspect and solder than very fine-pitch packages, making it suitable for prototypes, serviceable equipment, and moderate-production assemblies. Typical applications include industrial sensor controllers, CAN-connected equipment, UART-based data concentrators, SPI peripheral controllers, motor and valve-control modules, and compact consumer appliances. The combination of CAN and multiple serial interfaces is especially useful when a board must monitor sensors while communicating with a higher-level controller or service network. PCB design should preserve clean supply decoupling near the power pins, route sensitive analog and clock signals away from high-current switching nodes, and follow the manufacturer datasheet for alternate-function assignment and unused-pin treatment. Firmware replacement must also account for the exact Flash density, bootloader assumptions, peripheral configuration, and pin multiplexing of the selected device. This product page consolidates the key MCU capabilities, verified source links, comparison parameters, application guidance, and design considerations needed to plan an STM8S207K8T6C-based board efficiently.

Permintaan RFG Kontak
STM8S207MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207MBT6B

STM8S207MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207MBT6B is a 24 MHz performance-line 8-bit STM8 microcontroller with 128 KB of Flash program memory, integrated EEPROM, a 10-bit ADC, communication peripherals, and an 80-pin LQFP package measuring 14 x 14 mm. It is designed for embedded control systems requiring broad connectivity, moderate processing performance, and ample program storage. An 8-bit microcontroller is a compact semiconductor containing a processor core, program memory, data memory, peripherals, and clock circuitry on one integrated circuit. The STM8S207MBT6B belongs to the STM8S performance line, where the STM8S family serves as the product family, the 8-bit MCU is the product type, and the microcontroller is the broader category within the semiconductor hierarchy. Its architecture is suitable for industrial controls, embedded equipment, communications equipment, and compact automation systems. The device operates at up to 24 MHz and provides 128 KB of Flash memory. Integrated resources include EEPROM, a 10-bit analog-to-digital converter, timers, two UART interfaces, SPI, I²C, and CAN. These interfaces allow the MCU to connect sensors, actuator drivers, transceivers, displays, and industrial communication networks while retaining a relatively small 80-pin LQFP footprint. The STM8S performance line combines an 8-bit CISC-oriented embedded architecture with performance reaching 20 MIPS at 24 MHz according to the manufacturer product listing. Integrated EEPROM supports nonvolatile parameter and calibration storage, while the 10-bit ADC supports analog measurement. The two UARTs provide asynchronous serial connectivity, and SPI and I²C support peripheral expansion and sensor integration; CAN makes the device especially relevant to industrial and embedded networking designs. Typical applications include industrial control panels, motor and actuator control systems, CAN-connected equipment, data acquisition modules, communication controllers, instrumentation, and compact consumer or industrial controllers. Its 128 KB Flash capacity is useful for protocol stacks, control firmware, diagnostics, and field-updatable embedded functions. The 80-pin LQFP also provides more I/O and peripheral options than smaller packages, reducing the need for external interface expanders. PCB design should preserve access to all 80 package pins and follow the manufacturer’s pin, decoupling, clock, and exposed-resource recommendations. Because the exact numbered pin assignment is not reproduced on this page, use the manufacturer datasheet pin-description table when assigning tracks and connectors. Validate the external clock configuration, reset circuit, supply bypassing, and programming interface before releasing the PCB. This page combines the manufacturer’s 24 MHz and 128 KB headline specifications with interface-level application guidance, engineering design notes, and same-family drop-in comparisons. These details help engineers distinguish memory-capacity variants while confirming package, peripheral, and firmware-migration implications before selecting a replacement.

Permintaan RFG Kontak
STM8S207R6T6 - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics
STM8S207R6T6

STM8S207R6T6 - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics

The STMicroelectronics STM8S207R6T6 is a performance-line 8-bit STM8S microcontroller built around a CISC Harvard architecture core running at 24 MHz (20 MIPS) with 32 KB of on-chip Flash program memory and up to 2 KB of SRAM plus an integrated EEPROM data area. It integrates a 10-bit ADC, two 16-bit timers plus one 8-bit timer, two UARTs, SPI, I2C, and CAN, all in a 64-pin LQFP (T6 suffix) package operating from 2.95 V to 5.5 V. The device is positioned in the STM8S20xxx family which scales from 32 KB to 128 KB Flash and is intended for cost-sensitive motor-control, appliance, and industrial-control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripherals onto one silicon die. The STM8 family uses a CISC 8-bit core with a 16-bit instruction word, giving higher code density than legacy 8051 cores while retaining the predictable interrupt latency and deterministic timing that embedded control designers prefer. The STM8S207 series specifically belongs to the STM8S "performance line," sitting above the access-line STM8S103 and below the value-line STM8S105, and is paired with ST's Cosmic, IAR, and Raisonance toolchains plus the free STVD development environment. Key features of the STM8S207R6T6 include a 20 MIPS peak instruction throughput at 24 MHz, integrated CAN 2.0B interface, a 1 Mbyte linear address space, a single-wire SWIM debug interface, and an embedded bootloader stored in ROM for in-application Flash programming. The device offers 38 GPIOs with 5 V tolerance on most pins and supports up to 16 external interrupts. Watchdog, auto-wakeup, and a 4-level low-power run/wait/slow/halt scheme allow the device to drop quiescent current below 5 uA in Halt with full RAM retention. Architecturally, the STM8S core pairs a 32-bit program address bus with a 24-bit data address bus and supports up to 16 Mbytes of linear addressing for data, while code is read from a separate Flash bus. This Harvard split removes fetch-decode stalls that plague older 8-bit Von Neumann designs and is the reason the family reaches 20 MIPS at 24 MHz without wait states. A 32 KB Flash variant such as the STM8S207R6 sits at the low-memory end of the family, sharing the same peripheral set as the larger 64 KB (R8) and 128 KB (RB) siblings. Typical applications include BLDC/PMSM motor control in appliances, HVAC fan and pump control, smart metering, lighting ballast control, industrial sensor hubs, and CAN-connected remote I/O nodes. The integrated CAN controller, combined with 32 KB Flash, makes the part a good fit for distributed industrial nodes that need deterministic on-chip comms without an external transceiver MCU. When designing with the STM8S207R6T6, pay attention to the 5 V I/O tolerance (most pins are true 5 V tolerant, but a few high-current pins are FT-compat only) and to the SWIM pin shared with NRST; the debug probe needs a tri-state buffer on the SWIM line for in-circuit debugging without disabling reset. The internal 16 MHz HSI RC is accurate to about 1 percent after user trimming, but designs that need CAN bit-time accuracy must select the external HSE crystal option. This page synthesizes distributor pricing, drop-in LQFP-64 alternatives, and practical hardware design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
STM8S207R6T6TR - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics (Tape & Reel)
STM8S207R6T6TR

STM8S207R6T6TR - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8S207R6T6TR is a performance-line 8-bit STM8S microcontroller built around a CISC Harvard architecture core running at 24 MHz (20 MIPS) with 32 KB of on-chip Flash program memory and up to 2 KB of SRAM plus an integrated EEPROM data area. It integrates a 10-bit ADC, two 16-bit timers plus one 8-bit timer, two UARTs, SPI, I2C, and CAN, all in a 64-pin LQFP (T6 suffix) package operating from 2.95 V to 5.5 V. The device is positioned in the STM8S20xxx family which scales from 32 KB to 128 KB Flash and is intended for cost-sensitive motor-control, appliance, and industrial-control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripherals onto one silicon die. The STM8 family uses a CISC 8-bit core with a 16-bit instruction word, giving higher code density than legacy 8051 cores while retaining the predictable interrupt latency and deterministic timing that embedded control designers prefer. The STM8S207 series specifically belongs to the STM8S "performance line," sitting above the access-line STM8S103 and below the value-line STM8S105, and is paired with ST's Cosmic, IAR, and Raisonance toolchains plus the free STVD development environment. Key features of the STM8S207R6T6TR include a 20 MIPS peak instruction throughput at 24 MHz, integrated CAN 2.0B interface, a 1 Mbyte linear address space, a single-wire SWIM debug interface, and an embedded bootloader stored in ROM for in-application Flash programming. The device offers 38 GPIOs with 5 V tolerance on most pins and supports up to 16 external interrupts. Watchdog, auto-wakeup, and a 4-level low-power run/wait/slow/halt scheme allow the device to drop quiescent current below 5 uA in Halt with full RAM retention. Architecturally, the STM8S core pairs a 32-bit program address bus with a 24-bit data address bus and supports up to 16 Mbytes of linear addressing for data, while code is read from a separate Flash bus. This Harvard split removes fetch-decode stalls that plague older 8-bit Von Neumann designs and is the reason the family reaches 20 MIPS at 24 MHz without wait states. A 32 KB Flash variant such as the STM8S207R6 sits at the low-memory end of the family, sharing the same peripheral set as the larger 64 KB (R8) and 128 KB (RB) siblings. Typical applications include BLDC/PMSM motor control in appliances, HVAC fan and pump control, smart metering, lighting ballast control, industrial sensor hubs, and CAN-connected remote I/O nodes. The integrated CAN controller, combined with 32 KB Flash, makes the part a good fit for distributed industrial nodes that need deterministic on-chip comms without an external transceiver MCU. When designing with the STM8S207R6T6TR, pay attention to the 5 V I/O tolerance (most pins are true 5 V tolerant, but a few high-current pins are FT-compat only) and to the SWIM pin shared with NRST; the debug probe needs a tri-state buffer on the SWIM line for in-circuit debugging without disabling reset. The internal 16 MHz HSI RC is accurate to about 1 percent after user trimming, but designs that need CAN bit-time accuracy must select the external HSE crystal option. This page synthesizes distributor pricing, drop-in LQFP-64 alternatives, and practical hardware design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
STM8S207R8T3 - 24 MHz 64 KB 8-Bit MCU | STMicroelectronics
STM8S207R8T3

STM8S207R8T3 - 24 MHz 64 KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S207R8T3 is an 8-bit STM8S performance-line microcontroller operating at up to 24 MHz with 64 KB of Flash program memory in a 64-pin LQFP package. It is designed for embedded control applications requiring a compact 8-bit core, integrated communication peripherals, and mixed-signal measurement capability. The device includes a 10-bit ADC, two UART interfaces, SPI, I2C, CAN, and multiple timers according to the STM8S207R8T3 family documentation. An STM8 microcontroller is an 8-bit embedded controller within the broader microcontroller and semiconductor hierarchy. It combines a CPU, program memory, data memory, peripherals, and general-purpose I/O in one integrated circuit. The STM8S207 performance line is aimed at applications that need more connectivity and mixed-signal resources than basic 8-bit controllers, while retaining the simple programming model and peripheral set associated with the STM8 family. The headline operating specifications are a 24 MHz maximum clock speed, 64 KB of Flash memory, and a 64-pin LQFP package. The MCU supports a 3 V to 5.5 V supply range, as identified in the STM8S207R8T3 technical listing, and provides 38 I/O ports in the same listing. Its integrated 10-bit ADC enables analog sensor acquisition, while the CAN, UART, SPI, and I2C interfaces support industrial communication, external peripherals, data logging, and actuator-control systems. The STM8S207R8T3 belongs to the STM8S207 family, whose 64-pin members provide a practical balance of processing speed, memory, connectivity, and package size. The 8-bit architecture is suitable for real-time control tasks that do not require a high-performance 32-bit CPU. Typical embedded applications include motor and relay control, industrial interfaces, instrumentation, environmental monitoring, communication gateways, and compact consumer controllers. Design work should account for the device’s supply-voltage limits, clock configuration, peripheral pin multiplexing, and ADC input requirements. Use the manufacturer’s pinout and application information when assigning communication and analog functions, and include appropriate decoupling and signal-conditioning arrangements around the MCU. Because the STM8S207R8T3 is a high-pin-count LQFP device, careful PCB layout is important for reliable soldering, short return paths, and stable peripheral operation. This product page combines the core STM8S207R8T3 specifications, package information, application guidance, and verified replacement candidates. It is intended to help engineers compare the MCU with same-package family options, plan PCB and peripheral assignments, and identify the technical differences that matter before approving a substitution.

Permintaan RFG Kontak
STM8S207R8T6 - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics
STM8S207R8T6

STM8S207R8T6 - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics

The STMicroelectronics STM8S207R8T6 is a 24 MHz, 8-bit STM8S20xxx performance-line microcontroller with 64 KB of Flash program memory, integrated EEPROM, and a 64-pin LQFP package. It executes up to 20 MIPS at 24 MHz and combines an advanced 10-bit ADC with timers, two UARTs, SPI, I²C, and CAN connectivity. An 8-bit microcontroller is a compact processor optimized for embedded control, measurement, communications, and automation. The STM8S207R8T6 belongs to STMicroelectronics' STM8S family and is positioned as a high-density performance-line device. Its combination of EEPROM, serial peripherals, and CAN support allows designers to consolidate control logic that would otherwise require several discrete components. Principal features include a 24 MHz maximum CPU frequency, 64 KB of Flash memory, integrated EEPROM, and 10-bit analog-to-digital conversion. The device also provides 38 I/O ports, two UART interfaces, SPI and I²C serial buses, and CAN capability. A 3 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system architectures while allowing integration across industrial controls, communications equipment, and consumer products. The STM8 architecture provides a direct execution path for embedded firmware without an external instruction-memory interface. Hardware peripherals support serial data exchange, analog measurement, timing, and bus communication, reducing external component count and helping consolidate application logic. Maximum CPU operation at 24 MHz provides 20 MIPS of nominal instruction throughput, which is useful for responsive control loops and protocol handling. Typical applications include industrial automation controllers, CAN-connected equipment, serial data concentrators, motor and process control, programmable logic controllers, and compact consumer appliances. Its three principal bus and communication resources—UART, SPI, and I²C—support sensors, displays, transceivers, and external nonvolatile storage, while the 10-bit ADC supports analog monitoring. Design the PCB with short, terminated clock routes, decoupled supply pins, and a continuous ground plane. Confirm peripheral multiplexing, alternate-function assignments, and the 64-pin package pinout against the manufacturer documentation before finalizing routing. Firmware validation should include startup timing, watchdog behavior, bus contention, and CAN termination requirements for the selected system topology. This page consolidates the device's principal specifications, same-package replacement options, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified electrical attributes from parameters that still require confirmation from the official STM8S207x datasheet and reference manual.

Permintaan RFG Kontak
STM8S207RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207RBT3

STM8S207RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207RBT3 is an 8-bit STM8S performance-line microcontroller with a 24 MHz CPU, 128 KB of Flash program memory and a 64-LQFP package measuring 10 x 10 mm. It belongs to the STM8S207RB device family and is positioned for embedded control applications requiring embedded Flash memory, a broad peripheral set and an established 8-bit architecture. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication peripherals and general-purpose I/O. The STM8S family follows the hierarchy microcontroller > embedded controller > semiconductor. STM8 devices combine an 8-bit CPU with peripherals that can control motors, read sensors, operate communication interfaces and manage digital equipment without requiring a separate processor and supporting logic. The STM8S207RBT3 provides 128 KB of Flash organized as 128K x 8 and operates at up to 24 MHz. STMicroelectronics describes it as part of the STM8S20xxx performance line, whose devices offer program-memory configurations from 32 to 128 KB. Its 64-LQFP package provides 64 electrical contacts and is suitable for compact industrial, consumer, communications and automation equipment. The STM8S207RB family is designed around an 8-bit CPU with dedicated peripheral resources for embedded control. The 24 MHz maximum operating frequency supports faster control loops and peripheral servicing than lower-frequency members of the STM8 family, while 128 KB of embedded Flash allows larger application code, bootloader logic and configuration data to be consolidated into one device. Typical applications include industrial control modules, motor and actuator controllers, communications equipment, sensor interfaces, appliance controllers and compact embedded platforms. The device is especially relevant where 128 KB of embedded program memory simplifies firmware deployment while the 64-LQFP package provides a conventional surface-mount footprint suitable for PCB assembly. PCB design should preserve the exact pin assignments, power requirements, decoupling and clock configuration defined in the STMicroelectronics DS5839 datasheet. Firmware migrations between orderable STM8S207RB variants should verify the temperature grade, package suffix and peripheral configuration before substitution. This page combines the manufacturer’s STM8S207RB family information with exact STM8S207RBT3 ordering data, package details, application guidance and engineering-focused design considerations. It helps buyers identify the correct MCU while making pin, memory, package and sourcing decisions with fewer document lookups.

Permintaan RFG Kontak
STM8S207RBT6 - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207RBT6

STM8S207RBT6 - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207RBT6 is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 128 KB of Flash program memory, 20 MIPS performance, and a 64-pin LQFP package measuring 10 x 10 mm. It is designed for embedded control applications requiring integrated communications, mixed-signal measurement, and broad peripheral support. An 8-bit microcontroller is a compact embedded computing device that executes firmware from nonvolatile Flash memory while using timers, serial interfaces, and analog inputs to control a target system. The STM8S207RBT6 belongs to the STM8S performance-line hierarchy of 8-bit RISC microcontrollers, combining an advanced Harvard-architecture core with integrated EEPROM, analog, timing, and communication peripherals. Key features include a maximum CPU frequency of 24 MHz, 128 KB of Flash, a three-stage pipeline, a 10-bit ADC, two UARTs, SPI, I2C, and CAN connectivity. According to the STM8S207RBT6 product information, these peripherals allow the device to consolidate functions that would otherwise require separate interface and conversion ICs. The LQFP-64 package also provides numerous general-purpose I/O pins for external sensing, actuation, and communication connections. The STM8 core uses Harvard architecture, separating instruction and data access paths, while the three-stage pipeline supports efficient instruction throughput. At the maximum 24 MHz operating frequency, the device delivers up to 20 MIPS. Integrated EEPROM supports parameter and configuration storage, although its exact capacity must be confirmed from the complete manufacturer datasheet before it is reserved in firmware. Typical applications include industrial controllers, motor-control and automation equipment, communication modules, building-control interfaces, consumer appliances, and compact embedded control panels. CAN, SPI, I2C, and UART support is particularly useful for systems that must connect sensors, actuators, human-interface modules, or service buses while retaining a compact embedded-control architecture. Designers should verify the complete 64-pin pinout, peripheral alternate-function mappings, clock configuration, and decoupling requirements against the manufacturer datasheet. The 10 x 10 mm LQFP footprint is easy to inspect after soldering, but its fine-pitch leads still require careful land-pattern and paste-volume control for reliable assembly. This product page consolidates verified manufacturer and distributor information, package details, sourcing data, application guidance, and temperature-grade replacement options into an engineering-focused reference. It distinguishes exact drop-in options from broader functional comparisons so designers can make a package- and pin-compatible selection without overlooking software or qualification constraints.

Permintaan RFG Kontak
STM8S207RBT6C - 24MHz 8-Bit MCU with 128KB Flash | STMicroelectronics
STM8S207RBT6C

STM8S207RBT6C - 24MHz 8-Bit MCU with 128KB Flash | STMicroelectronics

The STMicroelectronics STM8S207RBT6C is an 8-bit STM8S performance-line microcontroller with a maximum CPU frequency of 24 MHz, 128 KB of Flash program memory, and a 64-LQFP package measuring 14 x 14 mm. It belongs to the STM8S207RB device family and is intended for embedded-control designs requiring a compact surface-mount microcontroller with substantial on-chip program storage. A microcontroller is a programmable semiconductor device that integrates a CPU core, program memory, data memory, and peripherals into one package. The STM8S207RBT6C belongs to the STM8 8-bit microcontroller hierarchy, where its relatively high operating frequency supports time-sensitive control loops, while 128 KB of Flash provides room for application code, boot logic, communication routines, and field-update capability. The STM8S207RB family spans performance-line devices offering up to 128 KB of Flash program memory. The key documented configuration is a 24 MHz maximum CPU frequency, 128 KB Flash organized as 128K x 8, an 8-bit architecture, and a 64-LQFP package with a 14 x 14 mm body. The C designation and tape-and-reel ordering suffix should be preserved when purchasing or substituting the part. Exact RAM capacity, peripheral configuration, pin functions, electrical limits, and operating-temperature limits must be confirmed in the manufacturer's product documentation before schematic capture or PCB release. The STM8S207RBT6C is suited to industrial controllers, compact automation modules, motor-control supervisory systems, appliance-control boards, and connected equipment that benefit from the STM8 8-bit platform. Its 24 MHz clock rate is useful for polling sensors, updating displays, executing state machines, and coordinating real-time I/O while retaining the simple programming model associated with 8-bit embedded control. A design should also verify motor-control, communication, and analog-peripheral requirements against the exact pin and peripheral map before selecting this package. A key design practice is to assign every external signal and supply connection from the 64-pin package drawing rather than inferring connections from a similarly named STM8S207RBT6. The manufacturer distinguishes the STM8S207RBT6C 14 x 14 mm package from the 10 x 10 mm STM8S207RBT6 package, so these two orderable devices cannot be treated as footprint-compatible. Keep the clock, reset, programming, debug, and decoupling networks within the layout and placement guidance in the manufacturer datasheet. This product overview combines the exact device identity, package distinction, searchable technical facts, procurement guidance, and replacement cautions with practical design guidance. It also highlights the limits of direct substitution: a valid drop-in alternative must match the 64-LQFP 14 x 14 mm footprint, pin arrangement, memory configuration, clock requirements, peripheral assignments, and electrical constraints rather than merely sharing the STM8S207RB family name.

Permintaan RFG Kontak
STM8S207RBT6TR - 24MHz 128KB 8-Bit MCU | STMicroelectronics (Tape & Reel)
STM8S207RBT6TR

STM8S207RBT6TR - 24MHz 128KB 8-Bit MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8S207RBT6TR is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 128 KB of Flash program memory, 20 MIPS performance, and a 64-pin LQFP package measuring 10 x 10 mm. It is designed for embedded control applications requiring integrated communications, mixed-signal measurement, and broad peripheral support. An 8-bit microcontroller is a compact embedded computing device that executes firmware from nonvolatile Flash memory while using timers, serial interfaces, and analog inputs to control a target system. The STM8S207RBT6TR belongs to the STM8S performance-line hierarchy of 8-bit RISC microcontrollers, combining an advanced Harvard-architecture core with integrated EEPROM, analog, timing, and communication peripherals. Key features include a maximum CPU frequency of 24 MHz, 128 KB of Flash, a three-stage pipeline, a 10-bit ADC, two UARTs, SPI, I2C, and CAN connectivity. According to the STM8S207RBT6TR product information, these peripherals allow the device to consolidate functions that would otherwise require separate interface and conversion ICs. The LQFP-64 package also provides numerous general-purpose I/O pins for external sensing, actuation, and communication connections. The STM8 core uses Harvard architecture, separating instruction and data access paths, while the three-stage pipeline supports efficient instruction throughput. At the maximum 24 MHz operating frequency, the device delivers up to 20 MIPS. Integrated EEPROM supports parameter and configuration storage, although its exact capacity must be confirmed from the complete manufacturer datasheet before it is reserved in firmware. Typical applications include industrial controllers, motor-control and automation equipment, communication modules, building-control interfaces, consumer appliances, and compact embedded control panels. CAN, SPI, I2C, and UART support is particularly useful for systems that must connect sensors, actuators, human-interface modules, or service buses while retaining a compact embedded-control architecture. Designers should verify the complete 64-pin pinout, peripheral alternate-function mappings, clock configuration, and decoupling requirements against the manufacturer datasheet. The 10 x 10 mm LQFP footprint is easy to inspect after soldering, but its fine-pitch leads still require careful land-pattern and paste-volume control for reliable assembly. This product page consolidates verified manufacturer and distributor information, package details, sourcing data, application guidance, and temperature-grade replacement options into an engineering-focused reference. It distinguishes exact drop-in options from broader functional comparisons so designers can make a package- and pin-compatible selection without overlooking software or qualification constraints.

Permintaan RFG Kontak
STM8S207S6T3C - 24MHz 8-Bit MCU, 32KB Flash | STMicroelectronics
STM8S207S6T3C

STM8S207S6T3C - 24MHz 8-Bit MCU, 32KB Flash | STMicroelectronics

The STMicroelectronics STM8S207S6T3C is a 24 MHz STM8S performance-line 8-bit microcontroller with 32 KB Flash program memory, 2 KB RAM, and 1 KB of integrated data EEPROM in a 44-pin LQFP package. It supports a 3.0 V to 5.5 V supply range and provides 38 I/O ports, making it suitable for compact embedded control systems that need serial communications and mixed-signal measurement. STM8S207S6T3C belongs to the STM8S20xxx family of 8-bit microcontrollers. An 8-bit MCU integrates a CPU, program memory, data memory, peripherals, and general-purpose I/O into one device, allowing compact embedded products to control sensors, actuators, communications, and user interfaces without requiring a separate processor. The device provides a 24 MHz clock, 10-bit ADC channels, timers, two UARTs, SPI, I2C, and CAN connectivity. These interfaces support industrial monitoring, motor and actuator control, communications modules, measurement equipment, and compact consumer or appliance controllers. The 32 KB Flash capacity is suitable for moderate firmware sizes where code density and deterministic embedded control are more important than the resources of a 32-bit MCU. The STM8S207S6T3C is identified as an active performance-line device. Its 3.0 V to 5.5 V operating supply and -40 °C to 125 °C temperature range support industrial temperature requirements. The LQFP package provides 38 externally available I/O pins, enabling simultaneous peripheral connections and easier prototype assembly than a very small leadless package. For new designs, place the device on a multilayer PCB with short, separated analog and digital return paths, use a separate 100 nF bypass capacitor at each supply pin, and follow the recommended external clock and reset network from the manufacturer reference manual. Confirm all peripheral pin assignments and alternate-function settings in the STM8S207x pin description table before finalizing the schematic and PCB layout. This product page summarizes the manufacturer specifications, identifies package and interface considerations, and provides a practical comparison framework for engineers evaluating STM8S207-family alternatives. It is intended to support design selection, sourcing, and hardware bring-up rather than replace the complete reference manual.

Permintaan RFG Kontak
STM8S207S8T3C - 24MHz 64KB 8-Bit MCU | STMicroelectronics
STM8S207S8T3C

STM8S207S8T3C - 24MHz 64KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S207S8T3C is a 24 MHz performance-line 8-bit STM8S microcontroller with 64 KB of Flash program memory, integrated EEPROM, a 10-bit ADC, communication peripherals, and 38 I/O ports in a 44-lead LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3 V to 5.5 V, and the stated operating-temperature range extends from -40°C to +125°C. An STM8 microcontroller is an 8-bit embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. STM8S devices combine a compact general-purpose CPU, program Flash, data EEPROM, timers, analog conversion, and serial interfaces in a single package. They are commonly used where inexpensive control, real-time peripheral handling, and compact PCB layouts are more important than the processing capacity of a 32-bit MCU. The STM8S207S8T3C combines a maximum 24 MHz clock with 64 KB of Flash memory and integrated EEPROM. Its 10-bit ADC supports analog measurement, while two UARTs, SPI, and I²C provide links to sensors, displays, memories, and external controllers. A CAN interface supports industrial networking, communication, and embedded-control equipment where a dedicated network transceiver can be paired with the MCU. The STM8S207 performance line is positioned above basic STM8 devices by combining higher processing speed, expanded peripheral support, and connectivity. With 38 I/O ports, the device can supervise multiple discrete inputs and outputs while retaining serial communication channels. The exact peripheral counts, timers, memory-map details, and electrical limits should be confirmed in the STMicroelectronics datasheet and reference manual for the STM8S207 family. Typical uses include motor and pump controllers, industrial interface modules, building automation equipment, automotive accessories, measurement instruments, and compact CAN-connected control nodes. The combination of 64 KB Flash, EEPROM, 10-bit conversion, and multiple serial interfaces supports standalone embedded products without requiring a separate external memory. PCB design should preserve the 44-pin LQFP footprint, verify every power and ground connection, and route high-current or sensitive analog paths away from switching nodes. Firmware selection must match the STM8S207 device identifier, and unused pins should be assigned to valid states in the device configuration before production. This product page combines manufacturer-family information, exact ordering-code characteristics, application engineering guidance, and a same-package comparison. It is intended to help designers assess memory, peripherals, timing, package, and thermal requirements before committing the MCU to a new PCB or production firmware baseline.

Permintaan RFG Kontak
STM8S207S8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics
STM8S207S8T6

STM8S207S8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics

The STM8S207S8T6 is a performance-line 8-bit microcontroller from STMicroelectronics, operating at up to 24 MHz with 64 Kbytes of Flash program memory. It is part of the STM8S20xxx family, which offers from 32 to 128 Kbytes of Flash, and is housed in a 44-pin LQFP package. The device integrates a rich set of peripherals including a 10-bit ADC, multiple timers, two UARTs, SPI, I2C, and CAN, making it suitable for a wide range of industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It typically integrates a CPU core, memory (Flash, RAM, EEPROM), and programmable peripherals on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit counterparts in processing power but offers lower cost, simpler architecture, and adequate performance for control-oriented tasks. The STM8S207S8T6 belongs to the STM8S performance line, which is designed for applications requiring higher clock speeds and richer connectivity than the value line, while maintaining the ease of use and robustness of the STM8 core. Key features of the STM8S207S8T6 include a 24 MHz CPU clock, 64 KB of Flash memory, 2 KB of data EEPROM, and a 10-bit ADC with up to 16 multiplexed channels. It also provides two UARTs, one SPI, one I2C, and a CAN 2.0B interface, enabling flexible communication in industrial networks. The device operates from a 3.3V or 5V supply, with a wide operating temperature range of -40°C to +85°C, and is available in a 44-pin LQFP package with a 10x10 mm body and 0.8 mm pitch. Technically, the STM8S207S8T6 is built on a high-performance 8-bit core with a three-stage pipeline, achieving up to 20 MIPS at 24 MHz. It includes a nested interrupt controller, a clock controller with multiple sources (internal RC, external crystal, or PLL), and a comprehensive set of timers including a 16-bit advanced control timer, two 16-bit general-purpose timers, and an 8-bit basic timer. The device also features a CAN controller with 3 mailboxes, supporting both standard and extended identifiers, which is critical for automotive and industrial networking. Typical applications include industrial control systems, home appliances, power tools, and automotive body electronics. The CAN interface makes it particularly suitable for automotive networks, while the rich timer set and ADC support motor control and sensor interfacing. The 5V tolerance simplifies direct connection to legacy sensors and actuators without level shifting. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100 nF capacitors placed close to the device. The internal RC oscillator can be used for cost-sensitive designs, but for precise timing, an external crystal is recommended. The STM8S207S8T6 supports in-circuit programming and debugging via the SWIM interface, which requires a single-wire connection and simplifies firmware updates.

USD $2,39 Kontak
STM8S207SBT6C - 24MHz 8-bit MCU 128KB Flash LQFP-44 | STMicroelectronics
STM8S207SBT6C

STM8S207SBT6C - 24MHz 8-bit MCU 128KB Flash LQFP-44 | STMicroelectronics

The STMicroelectronics STM8S207SBT6C is a 24 MHz 8-bit STM8S microcontroller with 128 KB program Flash and integrated EEPROM, housed in a 44-pin LQFP package. As a member of the STM8S performance line, this part delivers up to 24 MIPS CPU throughput, integrates a 10-bit ADC, multiple 16-bit timers, two UARTs, SPI, I2C and CAN peripherals, and is rated for 3.0 V to 5.5 V single-supply operation. An 8-bit MCU (microcontroller unit) is a self-contained computing IC that integrates a CPU core, non-volatile program memory (Flash), read/write data memory (RAM/EEPROM), and configurable peripherals (ADC, timers, communication interfaces) on a single die. Within the broader semiconductor taxonomy, an MCU is a sub-category of microcontroller -> embedded processor -> semiconductor device. The STM8S family uses a Harvard-architecture CISC core designed for deterministic real-time control, balancing low power, high code density, and 5 V tolerance that simplifies interfacing to legacy analog and industrial peripherals. The STM8S207SBT6C's key specifications include 38 general-purpose I/O lines, a 10-bit successive-approximation ADC with up to 16 channels, a 1 KB true-EEPROM data area plus 6 KB user RAM, two UARTs (including LIN master capability), one SPI peripheral, one CAN 2.0B interface, and a beCAN controller. Integrated reset circuitry, internal 16 MHz RC oscillator, and window watchdog reduce external component count. The part supports up to 30 kV ESD HBM and operates across -40 °C to +85 °C. Architecturally the STM8S uses a modified Harvard layout, 32-bit program counter with 24-bit linear addressing, and a single-cycle 8x8 multiplier, providing efficient C code generation. The 5 V-tolerant GPIO eliminates level shifters when interfacing to legacy 5 V sensors and drivers, while the integrated CAN controller removes the need for an external transceiver controller. A flexible clock tree with internal 16 MHz HSI reduces external crystal cost for cost-sensitive designs. Typical applications include industrial sensor conditioning nodes, building automation controllers, smart metering peripherals, automotive body and chassis subsystems, low-end motor control boards, and white-goods user-interface modules. Designers choose this STM8S207 variant when 128 KB Flash headroom is needed for communication stacks (CANopen, Modbus) while staying inside the 5 V-tolerant 8-bit ecosystem. A critical design consideration is power budgeting: at 24 MHz the core draws roughly 10 mA plus peripheral contributions, so a clean 3.3 V or 5 V LDO rail is recommended. Decouple VDD/VSS pairs with 100 nF X7R ceramic capacitors placed within 3 mm of each pin pair, and reserve a 4.7 uF bulk capacitor on the main rail. The CAN bus requires a 120 ohm termination offset on each end and a common-mode choke for industrial EMC compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet or individual supplier listings.

Permintaan RFG Kontak
STM8S208C6T3 - 24MHz 8-Bit MCU, 32KB Flash | STMicroelectronics
STM8S208C6T3

STM8S208C6T3 - 24MHz 8-Bit MCU, 32KB Flash | STMicroelectronics

STMicroelectronics STM8S208C6T3 is an 8-bit STM8S performance-line microcontroller operating at 24 MHz with 32 KB of Flash program memory in a 48-pin LQFP package measuring 7 x 7 mm. It supports 3.3 V and 5 V operation and integrates a 10-bit ADC, timers, two UART interfaces, SPI, I²C, CAN, and EEPROM for compact embedded control designs. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The STM8S208 belongs to the STM8S20xxx performance line, where the 8-bit MCU family belongs to the broader microcontroller, embedded-processing, and semiconductor hierarchy. Its combination of communication peripherals and integrated analog conversion supports industrial controls, communications equipment, and compact consumer products. The STM8S208C6T3 differentiates itself through its 24 MHz operating frequency, 32 KB Flash organization, and extensive peripheral set. Two UART channels allow simultaneous serial communication, while SPI and I²C support expansion and sensor connectivity. The integrated CAN controller is particularly useful for embedded networking, and the 10-bit ADC permits direct analog-signal measurement without a separate converter in many designs. The device uses an 8-bit STM8 architecture and is intended for embedded systems requiring deterministic control across multiple standard interfaces. Its 32 KB Flash capacity provides room for application firmware, while integrated EEPROM supports nonvolatile parameter storage. The exact RAM capacity, operating-temperature limits, ADC conversion rate, timer channels, and electrical characteristics require confirmation in the manufacturer datasheet before a production design is released. Typical applications include CAN-connected industrial controllers, serial gateways, motor and valve control systems, compact instrumentation, and CAN bus accessories. In these systems, the MCU can sample analog inputs through the 10-bit ADC, execute control logic, and communicate with external sensors or actuators through UART, SPI, I²C, or CAN. This integration reduces the number of external components and simplifies firmware architecture. Design layouts should place decoupling capacitors close to the supply pins, preserve adequate ground-plane continuity beneath the LQFP, and route sensitive analog inputs away from high-current switching nodes. Firmware should also define reset, watchdog, communication timeout, and peripheral initialization behavior before enabling application-level control loops. This product summary consolidates the verified STM8S208C6T3 characteristics, interface capabilities, application guidance, and drop-in family options into an engineering-focused resource that extends beyond a basic distributor listing.

Permintaan RFG Kontak
STM8S208C6T6 - 24MHz 32KB Flash 8-Bit MCU | STMicroelectronics
STM8S208C6T6

STM8S208C6T6 - 24MHz 32KB Flash 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S208C6T6 is a 24 MHz, 8-bit STM8S performance-line microcontroller with 32 KB of Flash memory, 12 KB of RAM, and 6 KB of integrated EEPROM in a 48-LQFP 7 x 7 mm package. The device operates from 3 V to 5.5 V and provides 38 I/O ports for compact embedded control systems. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals on one chip. The STM8S208 belongs to the hierarchy of 8-bit microcontrollers, embedded controllers, and integrated circuits. It combines a high-performance 8-bit core with communication and timing resources suited to cost-sensitive industrial, consumer, communications, and appliance-control products. Key features include a 24 MHz maximum clock, 32 KB Flash organized as 32K x 8, 12 KB RAM, and a 10-bit ADC. Integrated peripherals include timers, two UARTs, SPI, I2C, and CAN. The 48-LQFP package provides 38 I/O pins, allowing a design to combine digital control with analog measurement and multiple serial interfaces without requiring a larger package. The STM8S208 platform is implemented around a high-performance 8-bit core and a peripheral set designed for embedded control. Its combination of 32 KB Flash and 12 KB RAM gives embedded firmware room for state-machine logic, communications routines, calibration data, and application control. The CAN interface is particularly useful for distributed equipment where a controller must exchange periodic data over a robust vehicle or industrial network. Typical applications include industrial controllers, communication modules, motor and appliance controls, instrumentation, CAN-connected equipment, and compact consumer products. For a CAN design, the MCU can handle local real-time control while the CAN peripheral manages framed network traffic. For instrumentation, the 10-bit ADC supports analog measurements, while UART, SPI, and I2C cover external sensors, displays, and configuration devices. Designers should verify the exact peripheral pin assignments, alternate-function multiplexing, clock configuration, decoupling requirements, and programming interface from the manufacturer datasheet before layout. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, but each connected peripheral and external component must also tolerate the selected rail voltage. This page consolidates the verified 24 MHz, 32 KB Flash, 48-LQFP device information with same-family drop-in candidates, commercial purchasing guidance, and practical selection considerations that are not presented as one compact view in distributor listings.

Permintaan RFG Kontak
STM8S208C8T6 - 8-Bit 24MHz MCU, 64KB Flash | STMicroelectronics
STM8S208C8T6

STM8S208C8T6 - 8-Bit 24MHz MCU, 64KB Flash | STMicroelectronics

The STM8S208C8T6 is a high-performance 8-bit microcontroller from STMicroelectronics, part of the STM8S Performance line. It operates at a maximum frequency of 24 MHz and features 64 KB of Flash memory, 2 KB of EEPROM, and 4 KB of RAM. The device is housed in a 48-pin LQFP package (7x7 mm) and supports a supply voltage range of 2.95V to 5.5V, making it suitable for a wide range of industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and peripherals. It is a type of embedded processor used to control electronic systems. In the hierarchy of computing devices, an 8-bit MCU is a subset of microcontrollers, which are a subset of embedded systems, which are a subset of electronic systems. The STM8S208C8T6 is a CISC (Complex Instruction Set Computer) architecture MCU, offering a rich instruction set and efficient code density. Key features of the STM8S208C8T6 include a 10-bit analog-to-digital converter (ADC) with up to 16 channels, multiple timers (including a 16-bit advanced control timer, a 16-bit general-purpose timer, and a basic timer), and a comprehensive set of communication interfaces: two UARTs, one SPI, one I2C, and one CAN interface. The device also includes an integrated EEPROM for data storage, a watchdog timer, and a low-power mode for energy-efficient operation. The STM8S208C8T6 is built on a high-performance 8-bit core with a three-stage pipeline, achieving up to 20 MIPS at 24 MHz. It features a flexible clock control with an internal RC oscillator, an external crystal oscillator, and a phase-locked loop (PLL) for frequency multiplication. The device supports in-circuit programming and debugging via the SWIM (Single Wire Interface Module) interface, simplifying firmware development and field updates. Typical applications include industrial control systems, home automation, consumer electronics, automotive body electronics, and power management. The CAN interface makes it particularly suitable for automotive and industrial networking applications where robust communication is required. The wide operating voltage range and low-power modes enable battery-powered and energy-harvesting designs. When designing with the STM8S208C8T6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to the VDD and VSS pins. The SWIM interface should be reserved for programming and debugging. For CAN applications, an external CAN transceiver (e.g., TJA1050) is required. The device is RoHS compliant and available in tray packaging.

Permintaan RFG Kontak
STM8S208CBT6 - 24MHz 8-Bit MCU, 128KB Flash | STMicroelectronics
STM8S208CBT6

STM8S208CBT6 - 24MHz 8-Bit MCU, 128KB Flash | STMicroelectronics

The STMicroelectronics STM8S208CBT6 is a 24 MHz performance-line 8-bit microcontroller with 128 KB of Flash program memory, integrated EEPROM, and a 48-pin LQFP package. It combines a 10-bit ADC, multiple timers, two UART interfaces, SPI, I²C, and CAN connectivity for compact embedded control systems operating from 3.3 V or 5 V. An 8-bit microcontroller is a microprocessor optimized for embedded control tasks such as sensing, actuator control, communications, and system supervision. The STM8S belongs to the STM8S performance line and combines an 8-bit CISC architecture with dedicated peripheral interfaces. This hierarchy places it above basic 8-bit controllers in performance while retaining the simple programming model and cost profile associated with embedded microcontrollers. The principal device characteristics are a 24 MHz operating frequency, 128 KB of Flash memory, and a 48-pin LQFP package. Integrated EEPROM supports nonvolatile parameter storage, while the 10-bit ADC provides a practical interface for analog sensors. Two UARTs support serial diagnostics or external-module communication, and the SPI and I²C interfaces allow connection to displays, sensors, memory, and other digital peripherals. CAN support makes the device relevant to distributed industrial and automotive-style control networks. The STM8S208CBT6 integrates communication and timing resources in one package, reducing the need for external interface controllers. Its timer resources support periodic measurement, pulse generation, motor-control-oriented timing, and input capture functions. The combination of CAN, two UART channels, SPI, and I²C permits multiple independent communication paths while retaining a single embedded controller. Exact SRAM capacity, EEPROM capacity, ADC conversion rates, and individual timer counts must be confirmed in the manufacturer datasheet before final design sign-off. Typical applications include industrial sensor nodes, building-control modules, motor and relay controllers, automotive accessories, CAN-connected equipment, and compact consumer products. Its 48-pin package provides more I/O and peripheral connectivity than smaller STM8 devices, making it appropriate when a design needs both communication breadth and a meaningful number of external connections. The trade-off is a larger footprint and board area than 20-pin or 32-pin alternatives. For PCB design, assign pins from the exact STM8S208CB datasheet rather than inferring them from a generic STM8 symbol. Preserve the device’s decoupling requirements, provide a clean analog reference for the ADC, and route communication interfaces away from switching nodes. Confirm clock configuration, boot behavior, programming access, and unused-pin handling before committing the layout to production. This product record combines the manufacturer’s STM8S208CB family information with package, interface, application, and substitution guidance. It highlights the engineering trade-offs among same-footprint STM8S options and provides practical design context for teams selecting a 24 MHz, 128 KB Flash 8-bit controller for CAN, serial, analog, and embedded-control designs.

Permintaan RFG Kontak
STM8S208MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S208MBT6B

STM8S208MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S208MBT6B is an 8-bit STM8 performance-line microcontroller with a 24 MHz clock, 128 KB of Flash program memory, and an 80-pin LQFP package. It operates from 3.3 V to 5 V and is designed for compact control systems that require more code storage and peripheral integration than entry-level 8-bit MCUs. An STM8 microcontroller is an 8-bit embedded controller built around the STM8 architecture, a general-purpose processing platform used for real-time control, monitoring, human-interface, and communication tasks. Within the product hierarchy, the STM8 belongs to the STM8S performance line, combining an 8-bit core, embedded Flash, on-chip peripherals, and an industrial-grade operating option in a surface-mount package. The principal features include a maximum 24 MHz operating frequency, 128 KB of Flash memory, and operation across 3.3 V and 5 V supply levels. The 80-pin LQFP package provides a large pin count for analog inputs, digital interfaces, timers, communication peripherals, and debug or programming connections. The B suffix identifies the STMicroelectronics ordering variant, while the T6 portion identifies the package, temperature, and qualification characteristics used in the ordering code. The STM8S208MB series combines a substantial 128 KB code area with the STM8S peripheral set. This architecture is useful when firmware must manage several input channels, timers, serial communication, and embedded control logic without relying on an external memory interface. The 24 MHz clock provides additional processing margin for interrupt-intensive routines and structured control software, while the integrated Flash permits a compact, self-contained application design. Typical uses include industrial controllers, building and automation equipment, appliance control panels, sensor acquisition systems, metering equipment, and compact embedded control modules. The 80-pin package is particularly useful when a design requires more I/O than smaller STM8 devices provide. Applications should still account for each peripheral's alternate-function mapping and the electrical limits stated in the manufacturer datasheet. For layout, place all decoupling capacitors close to the corresponding supply pins and route high-current or high-switching-node connections away from sensitive analog inputs. Confirm oscillator, reset, programming, and boot-strapping connections against the pin-description table. SWD programming is a practical integration choice when a dedicated programming connector is required. This page combines the confirmed STM8S208MBT6B specifications, package details, sourcing information, application guidance, and verified drop-in alternatives. It also distinguishes documented replacements from devices that require firmware, pinout, or peripheral validation before they can be treated as equivalent.

Permintaan RFG Kontak
STM8S208R8T6 - 8-Bit 24MHz 64KB Flash MCU | STMicroelectronics
STM8S208R8T6

STM8S208R8T6 - 8-Bit 24MHz 64KB Flash MCU | STMicroelectronics

The STM8S208R8T6 is a high-performance 8-bit microcontroller from STMicroelectronics' STM8S series, featuring a 24 MHz CPU core, 64KB of Flash program memory, and 6KB of RAM. It is housed in a 64-pin LQFP package (10x10 mm) and operates from a 3.3V or 5V supply, making it suitable for a wide range of industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, memory, and peripherals. The STM8S series is a family of 8-bit MCUs from STMicroelectronics, positioned between low-end 8-bit devices and 32-bit ARM-based MCUs. It offers a cost-effective solution for applications requiring moderate processing power, rich peripherals, and low power consumption. The STM8S208R8T6 belongs to the performance line, which provides higher clock speeds and more memory compared to access line devices. Key features include a 24 MHz maximum CPU frequency with 0 wait states, 64KB of Flash memory, 6KB of RAM, and 2KB of EEPROM. It integrates a 10-bit ADC with up to 16 channels, multiple 16-bit timers, two UARTs, SPI, I2C, and a CAN interface. The device also includes a watchdog timer, brown-out reset, and low-power modes, enhancing reliability and energy efficiency. The STM8S208R8T6 is built on ST's advanced 8-bit core architecture, which delivers up to 20 MIPS at 24 MHz. It features a Harvard architecture with separate instruction and data buses, allowing simultaneous instruction fetch and data access. The integrated EEPROM enables non-volatile data storage without external components, and the CAN interface supports robust communication in automotive and industrial networks. Typical applications include industrial control systems, home appliances, automotive body electronics, and communication modules. The CAN interface makes it ideal for automotive networks, while the rich timer and ADC peripherals suit motor control and sensor interfacing. The wide operating voltage range (2.95V to 5.5V) ensures compatibility with both 3.3V and 5V logic systems. When designing with this MCU, ensure proper decoupling of the power supply and a stable clock source. The device supports multiple clock sources, including an internal RC oscillator and external crystal. For low-power applications, utilize the halt and active-halt modes to reduce current consumption. The CAN interface requires an external transceiver, such as the TJA1050, for physical layer connectivity.

Permintaan RFG Kontak
STM8S208RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S208RBT3

STM8S208RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S208RBT3 is an 8-bit STM8S performance-line microcontroller with a 24 MHz CPU, 128 KB of Flash program memory, integrated EEPROM, a 10-bit ADC, and communication peripherals including two UARTs, SPI, I²C, and CAN. The device is supplied in a 64-LQFP package measuring 10 x 10 mm and is intended for compact embedded-control systems. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and integrated peripherals on one device. STM8 devices belong to the broader microcontroller and embedded-processor hierarchy, combining an 8-bit CISC-oriented architecture with deterministic real-time control peripherals. The STM8S208 performance line is positioned above smaller STM8 families by offering more Flash memory and a broad selection of communication and timing resources. Key features of the STM8S208RBT3 include operation at up to 24 MHz, 128 KB of Flash, integrated EEPROM, a 10-bit analog-to-digital converter, multiple timers, 38 I/O ports, and support for UART, SPI, I²C, and CAN communication. These resources allow the MCU to consolidate several discrete functions on a single device and reduce component count in industrial controls, communications equipment, access systems, and embedded measurement products. The STM8S architecture supports a supply range of 3 V to 5.5 V according to the verified distributor data. Its integrated EEPROM provides nonvolatile data storage without requiring an external memory chip, while the 10-bit ADC supports analog sensor acquisition. Two UART channels enable asynchronous serial connectivity, SPI supports higher-speed peripherals, I²C supports external sensors and EEPROMs, and CAN supports industrial network nodes. Typical applications include industrial automation controllers, CAN-connected equipment, motor and relay control, environmental monitoring, access-control terminals, serial data acquisition, and compact consumer appliances. The 64-LQFP package provides enough I/O for external sensors, displays, transceivers, and actuators while remaining practical for leaded PCB assembly and prototype development. Designers should verify the exact pin assignment, electrical limits, oscillator requirements, reset circuit, and decoupling recommendations against the STM8S208RB manufacturer documentation before layout. The 3 V to 5.5 V supply requirement means external interface levels and sensor voltages must remain compatible with the MCU pins used. This product page consolidates verified manufacturer and distributor specifications, same-package replacement guidance, interface coverage, and practical engineering considerations into one reference for engineers evaluating the STM8S208RBT3.

Permintaan RFG Kontak
STM8S208RBT6 - 8-Bit 24MHz 128KB Flash MCU | STMicroelectronics
STM8S208RBT6

STM8S208RBT6 - 8-Bit 24MHz 128KB Flash MCU | STMicroelectronics

STMicroelectronics STM8S208RBT6 is an 8-bit STM8S performance-line microcontroller operating at 24MHz with 128KB of Flash program memory and up to 20MIPS throughput. It is supplied in a 64-pin LQFP package and supports 3.3V and 5V operation according to the verified product listings. Integrated peripherals include a 10-bit ADC, timers, two UARTs, SPI, I2C, and CAN. An STM8S microcontroller belongs to the 8-bit embedded-control segment of the semiconductor hierarchy. These devices combine a compact CISC core, embedded nonvolatile memory, analog conversion, serial communication, and timing peripherals in one package. They are used where deterministic control, low system complexity, and economical embedded intelligence are more important than the processing power and memory bandwidth of a 32-bit Cortex-M MCU. The STM8S208RBT6 combines 128KB Flash with a 24MHz clock, delivering 20MIPS as identified by Mouser. Its integrated 10-bit ADC supports measurements without a separate converter, while two UARTs, SPI, I2C, and CAN provide several paths for sensors, displays, industrial networks, and external controllers. This interface density makes the device suitable for compact industrial controllers, motor-control helpers, communication gateways, and embedded measurement products. As an STM8S20xxx performance-line part, the device belongs to a family offered from 32KB through 128KB Flash. The selected 128KB configuration provides more program space than lower-density variants while preserving the familiar STM8S peripheral and software environment. This supports protocol stacks, application logic, logging, and parameter handling in a single embedded controller. Typical applications include CAN-connected industrial nodes, sensor acquisition and control, motor or actuator supervision, and compact communication equipment. The CAN interface is valuable when the design must participate in a bus network, while the ADC and multiple serial interfaces support local sensing. Designers should still verify timing, peripheral availability, pin multiplexing, and memory requirements in the manufacturer documentation before finalizing firmware. The principal design consideration is that software compatibility does not guarantee an unconditional drop-in replacement. Firmware startup code, interrupt vectors, peripheral configuration, clock settings, and PCB pad assignments must all be checked. For new designs, the 128KB Flash capacity and broad mixed-signal connectivity can reduce external components, but the 64-pin LQFP footprint requires adequate board area and careful routing of analog and communication signals. This product page combines verified manufacturer, distributor, and cross-reference information with practical design guidance. It helps engineers assess the STM8S208RBT6, compare documented same-family options, understand its peripherals, and plan sourcing and PCB integration without presenting unsupported electrical values.

Permintaan RFG Kontak