集積回路

サブカテゴリ

📁 ADC/DAC 2,700+ 製品 📁 アンプIC 1,100+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 470+ 製品 📁 DSP 1,000+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6,800+ 製品 📁 インターフェースIC 2,200+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 360+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 19,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (35,000+)

PIC16LF18444-I/SS - 8-bit XLP MCU, 7KB Flash, 32MHz | Microchip
PIC16LF18444-I/SS

PIC16LF18444-I/SS - 8-bit XLP MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF18444-I/SS is an 8-bit microcontroller from the PIC16(L)F184xx family, featuring 7KB (4K x 14) of Flash program memory, 512 bytes of SRAM, and a 32MHz internal oscillator in a 20-pin SSOP package. The 'LF' prefix denotes the low-voltage (F) process node that operates across 1.8V to 3.6V, optimized for eXtreme Low-Power (XLP) battery-driven applications. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), peripherals, and I/O into one package. The PIC16F family uses a 14-bit instruction set with a modified Harvard architecture, positioning it within the broader hierarchy: MCU -> embedded controller -> semiconductor IC. The 'LF' low-power variants add XLP technology for sleep currents below 50 nA typical. Key features include two PWM modules, a comparator, a 5-bit and 12-bit DAC, a 12-bit Analog-to-Digital Converter with Computation (ADCC), a Complementary Waveform Generator (CWG), an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and both SPI and I2C serial interfaces. The 12-bit ADCC supports automated averaging and threshold comparison, offloading signal conditioning from the CPU. The device integrates Core Independent Peripherals (CIPs) that execute hardware functions without CPU intervention, reducing firmware complexity and improving deterministic real-time response. The 32MHz internal oscillator eliminates external crystal cost in cost-sensitive designs, while the XLP nanoWatt XLP sleep mode enables multi-year battery life in duty-cycled sensor nodes. Typical applications include IoT sensor nodes, wearable health monitors, remote controls, low-power wireless transmitters, battery management for portable instruments, and home automation endpoints. The wide peripheral set makes it a strong fit for sensor fusion hubs that must read analog signals, drive PWMs, and communicate over I2C or SPI simultaneously. When designing with this MCU, ensure the supply voltage stays within 1.8V to 3.6V and respect the absolute maximum of 4.0V on VDD. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the pin, and keep the MCLR pull-up weak (typically 10 kohm) to limit inrush current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for the PIC16LF18444-I/SS.

見積もり お問い合わせ
PIC16LF18444T-I/GZ - 8-bit 32MHz 7KB Flash XLP MCU | Microchip
PIC16LF18444T-I/GZ

PIC16LF18444T-I/GZ - 8-bit 32MHz 7KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF18444T-I/GZ is an 8-bit PIC microcontroller built on the eXtreme Low Power (XLP) architecture, integrating a 32 MHz internal core, 7 KB of Flash program memory (4K x 14 words), 512 B of SRAM, and 256 B of EEPROM in a compact 20-pin UQFN (4x4 mm) package. It operates from a 1.8 V to 3.6 V supply and is rated for the industrial -40 C to +85 C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich set of peripherals including timers, ADCs, and communication interfaces. Within the broader semiconductor taxonomy, an 8-bit MCU such as the PIC16 sits below 32-bit Cortex-M devices and is preferred when cost, deterministic interrupt latency, and code-efficiency per MHz are the dominant constraints. The PIC16LF18444 belongs to the PIC16(L)F184xx family, which Microchip targets at general-purpose low-power and battery-powered designs. Key features of the PIC16LF18444T-I/GZ include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWM modules, a Comparator, a Complementary Waveform Generator (CWG), an EUSART, and SPI/I2C peripherals. The device carries 18 general-purpose I/O pins and integrates Core Independent Peripherals (CIPs) that execute tasks in hardware without CPU intervention, enabling lower system power and faster deterministic response. Architecturally, the PIC16LF18444 uses Microchip's enhanced mid-range 8-bit core with a hardware multiply/accumulate assist and an instruction pipeline that delivers up to 16 MIPS at 32 MHz. The XLP analog and sleep-mode design achieves sub-uA deep-sleep currents, making it well suited for Energy Harvesting and always-on sensor nodes where coin-cell or Li-ion battery life drives the BOM. Typical applications include IoT sensor nodes, low-power wireless companion MCUs, battery-powered medical wearables, industrial telemetry, and consumer remote controls. The combination of small UQFN-20 footprint, 12-bit ADC, and 1.8 V minimum supply also fits wearable health patches and home-automation endpoints. When designing with this part, budget pin count first: 18 I/O plus power/clock pins fit comfortably in 4x4 mm, but if the application needs more peripherals or a different footprint (e.g., SOIC for hand-rework prototypes), a same-family pinout-compatible variant in PIC16LF18424/18426 should be evaluated before laying out the PCB. This page synthesizes distributor pricing, cross-reference alternatives, and design notes for the PIC16LF18444T-I/GZ drawn from Microchip's product page and authorized distributors.

見積もり お問い合わせ
PIC16LF18444T-I/SO - 32MHz 8-bit MCU, 7KB Flash | Microchip
PIC16LF18444T-I/SO

PIC16LF18444T-I/SO - 32MHz 8-bit MCU, 7KB Flash | Microchip

The Microchip PIC16LF18444T-I/SO is an 8-bit PIC16 microcontroller with 7KB Flash, 512B RAM, and 256B EEPROM, operating up to 32 MHz in a 20-pin SOIC package. The "LF" prefix denotes the low-power "XLP" family variant supporting 1.8 V to 3.6 V supply operation, ideal for battery-powered and energy-harvesting designs. The "T" suffix indicates tape-and-reel packaging, "I" denotes the -40 °C to +85 °C industrial temperature grade, and "SO" refers to the 300-mil SOIC-20 footprint. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals. PIC microcontrollers use a RISC-based Harvard architecture with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. The PIC16 family sits between PIC10/PIC12 entry-level parts and PIC18/dsPIC high-performance parts, balancing code density, peripheral richness, and ultra-low power consumption. The "F18444" member extends the legacy PIC16F1 platform with Core Independent Peripherals (CIPs) and Intelligent Analog peripherals, enabling sensor, motor-control, and human-interface applications without burdening the CPU. Headline features include 12-bit ADC with Computation (ADC2), a 5-bit DAC, two PWM modules, a Complementary Waveform Generator (CWG), comparators, EUSART, SPI, and I2C. Seven KB of self-programmable Flash supports in-application updates, while 256 bytes of EEPROM provide non-volatile user data storage, and 512 bytes of RAM serve runtime variables and stack space. The XLP technology delivers nanoWatt sleep currents, watchdog timer with on-chip LFO, and ultra-low-power wake sources such as RTC and ADC threshold compare. The architecture combines a 32 MHz internal oscillator with a clock-managed 16 MHz instruction cycle, supporting both INTOSC and external crystal/clock modes via the FOSC configuration bits. The CIPs (CLC, NCO, CWG, PWM, COG) operate autonomously from the CPU, freeing MIPS for application logic. This split of analog/mixed-signal, communications, and timing workloads across dedicated hardware makes the LF18444 well suited to sensor nodes that must minimize bill-of-materials cost while maximizing battery life. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power wireless sensor transmitters, home appliances with user interfaces, LED lighting controllers, and small motor-driver subsystems. Designers also use this device in wearables, fitness bands, and asset trackers where 1.8 V operation from a single coin cell or two AA cells is mandatory. A key design consideration is that the 7 KB Flash ceiling and modest RAM limit firmware complexity; consider PIC16F18446 or PIC18 families for richer GUI stacks or RTOS workloads. Decoupling the AVDD/VDD rails with 100 nF + bulk capacitors and following the SOIC-20 thermal layout guidelines keeps ADC noise within datasheet limits. This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF184xx family, and practical design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18444T-I/SS - 8-Bit 32MHz XLP MCU 7KB Flash | Microchip
PIC16LF18444T-I/SS

PIC16LF18444T-I/SS - 8-Bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip PIC16LF18444T-I/SS is an 8-bit PIC microcontroller in the PIC16LF18444 family with 7KB (4K x 14) of Flash program memory, 512B of data RAM, and a 32MHz maximum operating frequency, housed in a 20-pin SSOP (5.30mm body width) package. It operates from a 1.8V to 3.6V supply voltage range across an industrial -40C to +85C temperature window and is qualified to Microchip's eXtreme Low Power (XLP) specification, making it suitable for battery-powered applications where nanoWatt standby currents are required. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and CPU core, integrating Flash program memory, SRAM, peripherals, and interrupt logic on one die. Within the broader semiconductor hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in computational throughput but above pure logic ICs in functional density, and the PIC16LF18444 belongs to the PIC microcontroller > 8-bit microcontroller > embedded microcontroller taxonomy. This class of device typically targets cost-sensitive, low-power, deterministic control tasks rather than high-throughput DSP or graphics workloads. Key features of the PIC16LF18444 include 18 general-purpose I/O pins, a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWM modules, a comparator, a Complementary Waveform Generator (CWG), and an EUSART plus SPI/I2C interfaces. The device integrates a configurable logic cell (CLC) block, peripheral pin select (PPS) for remapping digital peripherals, and the XLP nanoWatt technology suite that delivers sleep currents in the tens of nanoamperes. The 12-bit ADCC supports automated averaging, threshold comparison, and oversampling for sensor-interface signal conditioning. The PIC16LF18444 architecture uses a Harvard memory structure with separate program and data buses, a 14-bit instruction word, and a hardware accumulator-based CPU. The on-chip peripherals are interconnected via the Peripheral Module Disable (PMD) registers so unused blocks can be powered down, and the CWG can synthesize complementary dead-band-controlled drive signals for power-converter or motor-control switching stages. Typical applications include low-power IoT sensor nodes, battery-powered wireless remote controls, white-goods and small-motor driver boards, LED lighting controllers, and consumer human-interface nodes where the SSOP-20 footprint, 18 I/O count, and nanoWatt sleep currents are decisive. The wide 1.8V-3.6V supply range supports direct operation from single-cell lithium or two AA cells with no external LDO. When designing with this MCU, keep total GPIO load within the 18-pin budget when PPS remapping is required, and respect the 32MHz maximum FOSC derating curve above 3.0V. Use the CLC and PPS to reduce external glue logic on the PCB, and place the supply decoupling capacitor within 3mm of the VDD pin. This page adds value beyond the manufacturer datasheet by combining distributor pricing, pin-to-pin compatible drop-in alternatives drawn from the PIC16LF family, and practical design notes that shorten the BOM-to-prototype cycle for low-power embedded designs.

見積もり お問い合わせ
PIC16LF18445-E/SO - 14KB Flash 8-bit MCU, SOIC-20 | Microchip
PIC16LF18445-E/SO

PIC16LF18445-E/SO - 14KB Flash 8-bit MCU, SOIC-20 | Microchip

The Microchip Technology PIC16LF18445-E/SO is an 8-bit PIC microcontroller from the PIC16F184xx family, featuring 14KB Flash program memory, 1KB RAM, and a 32MHz internal oscillator in a 20-pin SOIC (0.295 inch, 7.50mm width) package. The 'LF' suffix denotes the low-voltage variant operating from 1.8V to 3.6V, while 'E' designates the extended temperature range of -40C to +125C, making it suitable for industrial environments. An 8-bit microcontroller (MCU) is a programmable integrated circuit containing a CPU, Flash program memory, SRAM data memory, and configurable peripherals. The PIC architecture follows a Harvard RISC design with a 14-bit instruction word, where each instruction executes in one clock cycle (4 oscillator cycles). MCUs sit in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor, and serve as the decision-making core of countless battery-powered and industrial systems. Key differentiating features of the PIC16LF18445 include Core Independent Peripherals (CIPs) such as the Complementary Waveform Generator (CWG), Configurable Logic Cell (CLC), 12-bit Analog-to-Digital Converter with Computation (ADCC), 5-bit DAC, two PWM modules, EUSART, SPI, and I2C peripherals. The device integrates eXtreme Low-Power (XLP) technology with sleep currents below 50 nA typical and active current under 50 uA/MHz, qualifying it for energy harvesting and IoT sensor nodes. The 12-bit ADCC provides automated averaging, threshold detection, and hardware accumulation, offloading signal-conditioning code from the CPU. Typical applications include industrial sensor interfaces, battery-powered IoT nodes, consumer appliance controls, low-power remote controls, and motor control in small BLDC fans or stepper drivers. The wide 1.8V to 3.6V supply range allows direct connection to a single Li-ion or two AA cells without external regulation, simplifying BOM. For designs already using the 20-SOIC footprint, the PIC16F18445 (5V variant) and PIC16LF18444 (reduced-pin predecessor) remain drop-in compatible alternatives on the same 20-SOIC pad pattern, enabling platform scalability across voltage rails. One important design consideration: verify the SOIC-20 footprint matches the 0.295 inch body width used by this part. Choosing a less expensive 0.300 inch width footprint will not mate correctly. This page compiles distributor pricing, drop-in alternatives, and practical design notes not aggregated elsewhere on manufacturer datasheets.

見積もり お問い合わせ
PIC16LF18445-I/GZ - 14KB Flash, 32MHz 8-bit MCU | Microchip
PIC16LF18445-I/GZ

PIC16LF18445-I/GZ - 14KB Flash, 32MHz 8-bit MCU | Microchip

The Microchip Technology PIC16LF18445-I/GZ is an 8-bit PIC® XLP™ microcontroller delivering 32 MHz CPU performance with 14 KB Flash, 1 KB RAM, and Core Independent Peripherals (CIPs), housed in a 20-pin UQFN (4x4 mm) package with an exposed thermal pad. The 'LF' voltage range supports operation down to 1.8 V, while the on-chip peripherals include a 12-bit ADCC with computation, a 5-bit DAC, two PWM modules, a comparator, the Complementary Waveform Generator (CWG), EUSART, SPI, and I²C. Peripherals are routed via Peripheral Pin Select (PPS), enabling flexible PCB layout in a small 4x4 mm footprint. An 8-bit microcontroller (MCU) is a Von Neumann or Harvard-architecture processor with an 8-bit data path, optimized for deterministic real-time control, low power consumption, and small code footprint. The PIC16F184xx family sits in the hierarchy microcontroller -> embedded MCU -> 8-bit MCU -> PIC16 family -> XLP (eXtreme Low Power) family -> microcontrollers. XLP technology targets battery-powered and energy-harvesting applications where nanoWatt sleep currents and active-mode efficiency dominate design trade-offs versus 32-bit ARM Cortex-M alternatives. Key features that differentiate this part include 14 KB self-programmable Flash (8K x 14 words), 1 KB SRAM, 256 B EEPROM, hardware CWG for half-bridge/full-bridge/H-bridge control, the ADCC averaging/filtering accelerator, an angular timer, zero-cross detect, and mathematical accelerator. PPS maps digital peripherals to any I/O pin, and the ICSP/ICD interface supports in-circuit debug without removing the device from the board. The wide 1.8 V–3.6 V operating range covers 2-cell alkaline, single-cell Li-ion, and 3.3 V regulated rails. The PIC16LF18445 uses Microchip's enhanced mid-range core with a 14-bit instruction word and a 32 MHz internal oscillator, eliminating an external crystal in most designs. Brown-out Reset (BOR), Power-on Reset (POR), and a Windowed Watchdog Timer (WWDT) improve robustness in noisy industrial environments. The device is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC) plug-in for rapid peripheral setup. Typical applications include low-power IoT sensor nodes, battery-powered medical wearables, touch/user-interface front panels, LED lighting drivers using CWG, motor control with BEMF sensing, and USB-less USB-to-UART bridges using EUSART. The combination of nanoWatt XLP sleep, PPS, and the integrated 12-bit ADCC enables single-chip sensor hubs with no external ADC. When designing with this MCU, use a 0.1 µF decoupling capacitor within 5 mm of VDD, and bond the exposed pad (EP) to a grounded copper pour of at least 25 mm² for thermal and electrical reference. Do not float the MCLR pin in F-series applications; tie it to VDD through a 10 kΩ resistor to avoid spurious resets. Program the CONFIG words in MPLAB X to set the oscillator, BOR threshold, and code protection before first use. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18445-I/P - 8-Bit 32MHz XLP MCU, 14KB Flash 20-PDIP | Microchip
PIC16LF18445-I/P

PIC16LF18445-I/P - 8-Bit 32MHz XLP MCU, 14KB Flash 20-PDIP | Microchip

The Microchip Technology PIC16LF18445-I/P is an 8-bit RISC PIC16 microcontroller based on the enhanced mid-range core, delivering up to 32 MHz CPU performance from a wide 1.8 V to 3.6 V supply. It integrates 14 KB of self-programmable Flash program memory, 1 KB SRAM, 256 B data EEPROM, and a rich analog/digital peripheral set including a 12-bit ADC with computation (ADCC), a 5-bit/8-bit DAC, two comparators, two PWM modules, CWG (Complementary Waveform Generator), EUSART, SPI and I2C. The device is offered in a 20-pin PDIP through-hole package (suffix /P) and operates over the industrial temperature range of -40 C to +85 C. A PIC microcontroller (Programmable Interface Controller) is an 8-bit RISC MCU family originally developed by General Instrument and now led by Microchip Technology. PIC MCUs combine a Harvard architecture, deterministic instruction timing, and a compact instruction set to deliver predictable real-time behaviour in cost-sensitive embedded designs. The PIC16 sub-family sits between the baseline PIC10/12/14 parts and the higher-pin-count PIC18/24 devices, providing a balance of code density, peripheral integration, and low power consumption (XLP). Within the system hierarchy, the PIC16LF18445 belongs to: microcontroller (MCU) -> 8-bit MCU -> PIC16 family -> PIC16(L)F184xx sub-family -> power management and signal conditioning class. Key features include 14 KB Flash (8K x 14 words), 1 KB SRAM, 256 B EEPROM, an active clock scaling peripheral, a temperature indicator, mTouch capacitive touch support, and eXtreme Low Power (XLP) technology with sleep currents below typical 1 uA. The 12-bit ADCC with automatic averaging and threshold comparisons offloads signal conditioning from the CPU, and the CWG allows generation of complementary PWM with dead-band control for half-bridge drivers. The architecture uses a 14-bit instruction word, two hardware stack levels, and an interrupt controller with hardware context save/restore. The instruction pipelining delivers near 1 MIPS per MHz, so the device sustains ~16 MIPS at 32 MHz. The integrated low-power features include multiple Idle/Doze/Sleep modes with multiple wake sources (Interrupt-on-Change, RTC, WDT). Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, low-cost motor and fan control, consumer white goods, and small home-automation controllers. The through-hole 20-PDIP package is convenient for prototyping, hobby projects, and field-serviceable designs where socketed parts are preferred. A key design consideration is decoupling: place a 100 nF ceramic bypass capacitor as close as possible to the VDD/VSS pins and follow Microchip's recommended PCB layout for the analog and oscillator pins to preserve ADC accuracy and clock stability. This page synthesizes distributor pricing, drop-in alternatives from the PIC16(L)F184xx and PIC16(L)F183xx families, and practical design notes that go beyond the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18445-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16LF18445-I/SO

PIC16LF18445-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16LF18445-I/SO is an 8-bit microcontroller from the PIC16 XLP (eXtreme Low Power) 16F family, delivering up to 32MHz CPU performance with 14KB (8K x 14 words) of Flash program memory in a 20-pin SOIC (0.295", 7.50mm width) package. It features 1KB RAM and integrates rich Core Independent Peripherals (CIPs) including a 12-bit ADC with Computation (ADCC), a 5-bit/8-bit DAC, two PWMs, a Complementary Waveform Generator (CWG), comparators, EUSART, SPI and I2C interfaces for connected embedded designs. The 'LF' prefix denotes the low-voltage variant that supports a wide 1.8V-3.6V VDD range, optimized for battery-powered applications. According to the verified DigiKey listing, the device is in active production and ships from distributor stock today. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals on a single die. PIC microcontrollers use a Harvard RISC architecture with a 14-bit instruction word, and the XLP family adds specialized low-power modes such as sleep currents below 1 uA, making them well-suited for energy-harvesting and IoT endpoints. The PIC16 LF subfamily in particular targets coin-cell and Li-ion powered designs where wide VDD tolerance and ultra-low sleep current extend battery life. The PIC16LF18445's key strengths include 12-bit ADCC precision that exceeds typical 10-bit MCU ADCs, easing sensor signal conditioning; a built-in 5-bit/8-bit DAC for analog set-point generation without external ICs; and CWG for complementary PWMs commonly used in half-bridge motor drive with dead-band control. The EUSART supports both asynchronous serial and one-wire protocols, while the MSSP handles SPI/I2C for sensor and EEPROM interfaces. According to the verified distributor listings, 14KB Flash with 8K x 14 word organization supports C-compiled firmware comfortably within the device's code footprint. Typical applications include low-power IoT sensor nodes, battery-powered consumer products, LED lighting controllers, home appliance user-interface panels, and small motor/valve drivers. The CWG and dual PWM simplify BLDC or stepper half-bridge commutation; the 12-bit ADCC handles thermistor or potentiometer inputs directly. Compared with PIC16F baseline parts, the LF variant's wider operating voltage and lower sleep current make it preferable for always-listening battery nodes. According to Microchip PIC16(L)F184xx family documentation, this part is recommended when 14KB Flash and 12-bit ADC are needed together. When designing, allocate one decoupling 100nF ceramic capacitor close to each VDD pin and a bulk 10uF near the regulator output. Use the on-board ICD/debug header (ICSPDAT/ICSPCLK) to retain in-circuit programming access in the PCB layout. Ensure unused PIM matches below 1 uA by configuring all unused pins as outputs low; the XLP Sleep mode current is documented in the family datasheet.

見積もり お問い合わせ
PIC16LF18445-I/SS - 8-bit XLP MCU 14KB Flash 20-SSOP | Microchip
PIC16LF18445-I/SS

PIC16LF18445-I/SS - 8-bit XLP MCU 14KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16LF18445-I/SS is an 8-bit PIC® XLP™ microcontroller delivering 32 MHz CPU performance with 14 KB Flash, 1 KB RAM and 256 bytes EEPROM in a 20-pin SSOP package. It operates from 1.8V to 3.6V with eXtreme Low-Power (XLP) technology and integrates a 12-bit ADC with Computation (ADC2), 8-bit DAC, two PWMs, comparators and Core Independent Peripherals (CIPs) including the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG) and NCO. Communication peripherals include EUSART, SPI and I²C. The exposed SSOP-20 footprint is rated for the industrial -40 °C to +85 °C range per the -I temperature suffix. An 8-bit microcontroller is a small, low-cost computing core built around an 8-bit data path with on-chip Flash, RAM, peripherals and an interrupt controller. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, allowing most instructions to execute in a single cycle. Within the broader semiconductor hierarchy they sit under microcontrollers, embedded ICs and finally integrated circuits. The 8-bit class remains popular in low-power sensor, motor and human-interface designs where deterministic real-time response and long battery life outweigh raw throughput. Key features that differentiate the PIC16LF18445 include 14 KB self-programmable Flash, Memory Access Partitioning (MAP) for bootloader-style code protection, the Device Information Area (DIA) for serial-number and calibration storage, and Peripheral Pin Select (PPS) that remaps digital peripherals to nearly any I/O pin. The ADC2 block performs averaging, oversampling and threshold comparisons in hardware, offloading signal conditioning from the CPU. Together these features let a single chip replace a discrete op-amp, filter and MCU in many sensor front-ends. Typical applications include battery-powered IoT sensor nodes, low-power remote controls, white-goods and appliance user interfaces, small motor/valve controllers, and personal-care or medical consumables. Designers choose it when the system is size- and energy-constrained but still needs accurate analog sensing and serial connectivity. The 32 MHz core, 1 KB RAM and 14 KB Flash are ample for state-machine control and modest communication stacks such as Modbus RTU or LIN slaves.

見積もり お問い合わせ
PIC16LF18445T-I/GZ - 8-bit 32MHz MCU, 14KB Flash | Microchip
PIC16LF18445T-I/GZ

PIC16LF18445T-I/GZ - 8-bit 32MHz MCU, 14KB Flash | Microchip

The Microchip Technology PIC16LF18445T-I/GZ is an 8-bit PIC® XLP™ 16F microcontroller featuring 14 KB (8K x 14) of Flash program memory, 1 KB of RAM, and 18 general-purpose I/O lines, housed in a 20-pin UQFN (4x4 mm) package with an exposed thermal pad. The 'LF' prefix designates the low-voltage / eXtreme Low Power (XLP) variant, while 'T' indicates tape-and-reel packaging and 'I' denotes the -40C to +85C industrial temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a configurable set of peripherals. The PIC16F184xx family uses a Harvard-architecture 8-bit RISC core optimized for deterministic instruction execution and ultra-low power consumption, placing it in the broader hierarchy: microcontroller -> embedded controller -> semiconductor IC -> electronic component. The XLP technology targets battery-powered and energy-harvesting applications that demand nanoampere sleep currents. Key features include a 32 MHz maximum CPU clock, 12-bit ADC with Computation (ADCC), a 5-bit and 8-bit DAC, two PWM modules, two comparators, a Complementary Waveform Generator (CWG), an EUSART, and SPI / I2C interfaces. The 14 KB Flash supports self-programming and ICSP, and the device operates from 1.8 V to 3.6 V. Core Independent Peripherals (CIPs) such as CWG and ADCC can operate without CPU intervention, reducing firmware complexity and power consumption. The PIC16LF18445 employs Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word. The XLP Sleep mode can drop current consumption to nanoampere levels, while the peripheral module disable logic lets unused peripherals be turned off individually. An integrated temperature indicator and windowed watchdog timer (WWDT) provide additional system-monitoring features suitable for safety-sensitive applications. Typical applications include IoT sensor nodes, low-power wireless remote controls, battery-powered consumer devices, LED lighting controllers, small motor control, and home-automation edge nodes. The 20-UQFN 4x4 mm footprint also makes it well suited to space-constrained wearables. When designing with this part, place a 100 nF decoupling capacitor as close as possible to the VDD pin, connect all VSS pins to a solid ground plane, and observe the exposed-pad soldering recommendations in the Microchip datasheet for thermal and electrical performance. Programming is supported through MPLAB X IDE with the XC8 compiler and PKOB or ICD debuggers. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical engineering notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18445T-I/SO - 32MHz 8-bit XLP MCU, 14KB Flash | Microchip
PIC16LF18445T-I/SO

PIC16LF18445T-I/SO - 32MHz 8-bit XLP MCU, 14KB Flash | Microchip

The Microchip Technology PIC16LF18445T-I/SO is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, featuring eXtreme Low-Power (XLP) technology, 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, all housed in a 20-pin SOIC package. The LF (low-power) variant supports a wide 1.8V to 3.6V supply range optimized for battery-powered designs, while the core delivers 16 MIPS performance at 32 MHz and integrates Core Independent Peripherals (CIPs) such as a 12-bit ADC with Computation (ADCC), 5-bit DAC, two PWMs, comparators, a Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and EUSART/SPI/I2C communication peripherals. An 8-bit microcontroller (MCU) is a compact computing-on-a-chip that integrates a CPU, non-volatile program memory (Flash), working RAM, and a rich set of peripherals onto a single silicon die. It belongs to the broader family of microcontrollers -> microcontrollers and microprocessors -> semiconductors -> integrated circuits. The 8-bit data path makes MCUs of this class ideal for cost-sensitive, deterministic, low-power embedded control tasks such as sensor reading, motor drive, user I/O, and protocol bridging, where the application demands predictable response times rather than raw computational throughput. Key features of the PIC16LF18445T-I/SO include 14KB self-programmable Flash with 128B of EEPROM emulation, 1KB SRAM, a 12-bit differential ADCC capable of up to 100 ksps, a 5-bit DAC, two 10-bit PWMs, three comparators, CWG, four CLCs, an EUSART, two MSSP (SPI/I2C) peripherals, and a 32 MHz internal oscillator with ±1% accuracy. XLP technology delivers typical sleep currents in the nanoamp range and active currents in the microamp range at low clock speeds, which is essential for IoT sensor nodes that spend most of their time in deep sleep. The 20-pin SOIC package exposes up to 17 general-purpose I/O pins and is fully pin-compatible with the PIC16LF18444 (12KB Flash) and PIC16LF18345 (14KB Flash, smaller RAM) families, simplifying migration within Microchip's PIC16 XLP portfolio. The device is supported by MPLAB X IDE, the XC8 compiler, and the MPLAB Code Configurator (MCC) for graphical peripheral setup, accelerating development cycles. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote controls, low-power wireless sensor transmitters, and consumer appliance user-interface controllers. The compact 20-pin SOIC footprint is well suited for hand-held and space-constrained designs where PCB real estate is at a premium. When designing with this MCU, ensure that the ICSP programming pins (PGED/PGEC) are accessible on the PCB for in-circuit programming and debugging. The wide 1.8V-3.6V supply range permits direct connection to a single Li-ion / two AA cells; at 32 MHz, plan for active-mode current of a few mA to avoid over-discharging the battery during sustained operation. This page synthesizes distributor pricing, drop-in alternatives, design notes, and XLP power-tuning guidance not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18445T-I/SS - 14KB Flash 8-bit MCU, SSOP-20 | Microchip
PIC16LF18445T-I/SS

PIC16LF18445T-I/SS - 14KB Flash 8-bit MCU, SSOP-20 | Microchip

The Microchip Technology PIC16LF18445T-I/SS is an 8-bit RISC microcontroller from the PIC16(L)F184xx family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB of SRAM, and 256 bytes of data EEPROM. It executes instructions at up to 32MHz from an internal oscillator and is housed in a 20-pin SSOP (Shrink Small Outline Package) with 18 user I/O pins. The 'LF' suffix designates the low-voltage (F) variant that operates from 1.8V to 3.6V, while the 'T' indicates Tape and Reel packaging and the 'I' denotes the industrial -40C to +85C temperature grade. What is a PIC16 microcontroller? A PIC16 microcontroller is an 8-bit Harvard-architecture RISC device from Microchip Technology, sitting within the PIC microcontroller family hierarchy as PIC10 -> PIC12 -> PIC16 -> PIC18 -> PIC24 -> dsPIC -> PIC32. It belongs to the broader category of microcontrollers (MCU) -> microprocessors -> semiconductors -> integrated circuits. PIC16 parts are widely used in cost-sensitive embedded designs because they combine low power consumption, deterministic interrupt latency, and rich Core Independent Peripherals (CIPs) that offload tasks from the CPU. Key features include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWM modules with complementary outputs, a Comparator, a Configurable Logic Cell (CLC), a Complementary Waveform Generator (CWG), and an EUSART plus SPI/I2C for serial communication. The integrated Core Independent Peripherals (CIPs) allow analog and timing functions to run without CPU intervention, freeing the core for application logic and reducing firmware complexity. eXtreme Low-Power (XLP) technology provides sub-microamp sleep currents, enabling battery-powered designs that last years on a single coin cell. The PIC16LF18445 uses an enhanced mid-range 8-bit CPU core with a 14-bit instruction word, 16 levels of hardware stack, and 32-level-deep interrupt nesting. The internal 32MHz oscillator is factory calibrated to within +/-1%, eliminating external crystals in most designs. A configurable instruction-cycle timer, peripheral pin select, and zero-cross detection support simplify sensor interfaces and motor-control feedback loops. Typical applications include IoT sensor nodes, low-power remote controls, battery-powered instrumentation, home-automation white goods, LED lighting controllers, and small appliance motor drives. The wide 1.8V-3.6V range makes it compatible with single-cell Li-ion and 2x AA battery chemistries. When designing with this device, ensure the supply decoupling network uses a 100nF ceramic capacitor close to VDD with a bulk capacitor of at least 1uF to suppress switching transients generated by the EUSART and PWM peripherals. The unused I/O pins should be configured as outputs or set to weak pull-ups to minimize sleep current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving embedded engineers a single consolidated reference for the PIC16LF18445T-I/SS.

見積もり お問い合わせ
PIC16LF18446-E/P - 32MHz 8-bit XLP MCU, 28KB Flash | Microchip
PIC16LF18446-E/P

PIC16LF18446-E/P - 32MHz 8-bit XLP MCU, 28KB Flash | Microchip

The Microchip PIC16LF18446-E/P is an 8-bit PIC16 microcontroller with 28KB Flash, 2KB SRAM, and a 32MHz CPU core, housed in a 14-pin PDIP through-hole package. The 'LF' prefix denotes the extended eXtreme Low-Power (XLP) voltage range, supporting operation from 1.8V to 3.6V, while the 'F' variant supports 2.3V to 5.5V. Per the Microchip product page, the device integrates 12-bit ADCC, 5-bit DAC, 2 PWMs, comparator, CWG, EUSART, SPI/I2C, and Core Independent Peripherals (CIPs) for low-power general-purpose designs. Operating temperature range is -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates CPU, RAM, non-volatile program memory, and peripherals on one die. The PIC16 family sits within the broader PIC16-bit/8-bit product taxonomy (PIC10/12/14/16 -> 8-bit PIC microcontrollers -> PIC microcontrollers -> microcontrollers -> embedded ICs -> integrated circuits). The 'LF' family specifically targets battery-powered and energy-harvesting designs where deep sleep currents measured in nA matter for years of coin-cell operation. This places PIC16LF18446-E/P in a unique position for IoT endpoints. Key differentiating features include 28KB self-programming Flash (16K x 14 words), 256-byte EEPROM data memory, 2KB SRAM, and a wide CIP peripheral set. The 12-bit ADC with computation (ADCC) oversamples and averages autonomously, reducing firmware burden. The 5-bit DAC combined with the comparator enables programmable analog signal generation. The device also includes multiple PWMs and the Configurable Logic Cell (CLC) for hardware glue. Architecture is the enhanced mid-range PIC16 core with a hardware multiplier and 14-bit instruction word. The XLP technology adds deep sleep modes drawing <50 nA typical with RTC and <100 nA with WDT, enabling battery lifetimes of 10+ years on a single coin cell. The 32MHz internal oscillator eliminates the external crystal for most cost-sensitive designs. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, energy-harvesting wireless transmitters, low-power remote controls, and industrial sensor interfaces. The combination of CIPs and XLP makes it ideal for event-driven designs that spend most of their time in deep sleep. Design consideration: leverage the CWG, CLC, and ADCC peripherals to offload timing-critical operations from the core, allowing deeper sleep states. Avoid polling-based architectures to maximize the XLP current savings. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16LF184xx family, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18446-E/SO - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16LF18446-E/SO

PIC16LF18446-E/SO - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16LF18446-E/SO is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, featuring 28KB (16K x 14 words) of Flash program memory, 2KB of RAM, and a 32MHz internal oscillator core. It is housed in a 20-pin SOIC (7.50 mm / 0.295 inch wide) package and operates from a 1.8V to 3.6V supply tailored for low-power XLP (eXtreme Low-Power) designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program/data memory, peripherals, and I/O on one silicon die. The PIC16LF18446 belongs to the broader 8-bit MCU taxonomy: microcontroller -> embedded MCU -> PIC architecture -> Microchip mid-range enhanced core. It sits within the 'LF' subfamily that targets battery-powered applications by lowering the maximum VDD to 3.6V and adding sleep currents in the nanoampere range, making it distinct from the 5V-tolerant PIC16F18446 variant. Key features include a 12-bit ADC with Computation (ADCC), a 5-bit/8-bit DAC, two PWMs with complementary outputs, a Comparator, a Complementary Waveform Generator (CWG), an EUSART, and SPI/I2C peripherals. The device supports Core Independent Peripherals (CIPs) that operate without CPU intervention, freeing the core for housekeeping or sleep. The 32MHz maximum clock delivers up to 16 MIPS, while the XLP technology enables typical sleep currents below 50 nA with retention RAM. Typical applications include low-power IoT sensor nodes, battery-powered remote controls, industrial sensor transmitters, consumer white goods interfaces, and portable medical accessories. The integrated 12-bit ADCC simplifies direct sensor conditioning and averaging in firmware, while the CWG simplifies half-bridge and full-bridge power-switching timing. Designers should observe the 3.6V absolute maximum VDD, use proper decoupling (100 nF + 1 uF) close to VDD/SS pins, and configure unused pins as outputs to minimise current. Programming is supported via Microchip's MPLAB X IDE, XC8 compiler, and PICkit or ICD debug tools. This page combines distributor pricing, drop-in alternatives, and design notes not found on a single distributor listing, helping engineers pick the right Microchip PIC16 variant for low-power embedded designs.

見積もり お問い合わせ
PIC16LF18446-E/SS - 8-bit 32MHz 28KB Flash XLP MCU | Microchip
PIC16LF18446-E/SS

PIC16LF18446-E/SS - 8-bit 32MHz 28KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF18446-E/SS is an 8-bit PIC microcontroller based on the enhanced mid-range PIC16 CPU core, delivering 32 MHz of CPU performance from 28 KB of on-chip Flash program memory in a 20-pin SSOP package. It belongs to the PIC16(L)F184xx family and integrates 2 KB of SRAM, 256 bytes of data EEPROM, and a rich set of Core Independent Peripherals including a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWM modules, a Complementary Waveform Generator (CWG), a Comparator, and both EUSART and SPI/I2C serial interfaces. The 'LF' low-voltage variant operates across a 1.8 V to 3.6 V supply range and features Microchip's eXtreme Low-Power (XLP) technology. A PIC microcontroller is a compact, self-contained computer-on-a-chip that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals into a single IC. PIC MCUs sit within the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit, and they are typically deployed as the decision-making brain of small embedded systems where deterministic real-time behaviour, low power consumption, and minimal external components are required. Key features of this part include 32 MHz maximum CPU clock, 28 KB Flash (16K x 14 words), 2 KB SRAM, 256 bytes EEPROM, 12-bit ADCC, 5-bit DAC, 2x PWM, CWG, Comparator, EUSART, SPI/I2C, and an extended industrial temperature range of -40 C to +125 C. The XLP architecture supports sleep currents down to the low-nanoampere range with retention, enabling multi-year battery life for IoT endpoints. The 20-pin SSOP package (0.65 mm pitch, 5.30 mm body width) makes the device well suited for compact hand-held and industrial modules, while the wide operating voltage window simplifies designs that must run directly from a single lithium cell or 3.3 V regulated rail. Designers can take advantage of the integrated CIPs to offload timing-critical tasks from the CPU, reducing firmware complexity and total power consumption. Typical applications include consumer appliances, low-power IoT sensor nodes, battery-powered industrial sensors, LED lighting controllers, and small motor or fan control loops. The 12-bit ADCC and 5-bit DAC also support precision analogue signal conditioning and waveform generation tasks that previously required a dedicated analogue front-end IC. When designing with this part, carefully evaluate total pin demand (only 20 pins are available on the SSOP variant) and reserve dedicated ICSP pins for in-circuit programming and debugging. Adequate decoupling - typically a 100 nF ceramic capacitor placed within 3 mm of VDD - is recommended, and unused pins should be configured as outputs low to minimise quiescent current draw. This page synthesises distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet, giving procurement and engineering teams a single source of truth for evaluating the PIC16LF18446-E/SS.

見積もり お問い合わせ
PIC16LF18446-I/GZ - 28KB Flash 32MHz 8-bit MCU | Microchip
PIC16LF18446-I/GZ

PIC16LF18446-I/GZ - 28KB Flash 32MHz 8-bit MCU | Microchip

The Microchip Technology PIC16LF18446-I/GZ is an 8-bit PIC microcontroller with 28KB Flash, 2KB RAM, and 32MHz operation in a 20-pin UQFN (GZ) 4x4 mm package, designed for low-power and general-purpose embedded applications. It integrates a 12-bit ADC with computation (ADCC), a 5-bit/8-bit DAC, two PWMs, a comparator, CWG (Complementary Waveform Generator), and EUSART plus SPI/I2C interfaces. The 'LF' suffix denotes the eXtreme Low-Power (XLP) variant supporting operation down to 1.8V. An 8-bit microcontroller (MCU) is a microprocessor core with an 8-bit data path, on-chip program memory, RAM, and integrated peripherals. Within the embedded hierarchy, PIC16 sits at the low-pin-count tier of Microchip's PIC family (PIC10/12/16/18/24/32), optimized for cost-sensitive, deterministic real-time control. The PIC16F184xx family specifically targets applications requiring high-resolution analog, Core Independent Peripherals (CIPs), and very low standby power. Compared to 32-bit ARM Cortex-M0+ parts, the PIC16LF18446 trades raw compute throughput for predictable interrupt latency, lower active/standby current, and a smaller code footprint for typical control loops. Key features of the PIC16LF18446 include 28KB (16K x 14 words) self-programmable Flash, 2KB SRAM, 256B EEPROM, 18 digital I/O pins, 12-bit ADCC with automated math operations, 8-bit/5-bit DAC, 2x 10-bit PWMs, configurable logic cell (CLC), and EUSART (RS-232/RS-485) with SPI and I2C. The device operates from 1.8V to 3.6V across -40C to +85C industrial temperature range, and includes nanoWatt XLP sleep modes drawing sub-uA currents. The CWG and PWM peripherals can synthesize complementary gate-drive waveforms directly without CPU intervention, useful for switched-mode power and lighting control. Architecturally, the PIC16LF18446 uses Microchip's enhanced mid-range core with a 14-bit instruction word and 16-level hardware stack, providing deterministic execution and interrupt response. On-chip peripherals are designed as Core Independent Peripherals (CIPs) - meaning CLC, CWG, PWM, ADCC, and timers can interact without CPU involvement, freeing the core for application logic and reducing firmware complexity. Typical applications include IoT sensor nodes, battery-powered wearables, LED lighting controllers, low-end motor control, home appliances, and consumer electronics. The combination of 12-bit ADCC and 5-bit DAC supports closed-loop analog control without external converters. When designing with this device, ensure the supply decoupling network (typically 100nF + 1uF) is placed within a few millimeters of the VDD pin, and that unused I/O are configured as outputs low or inputs with internal pull-ups enabled to minimize leakage. MPLAB X IDE with XC8 compiler and the free MPLAB Code Configurator (MCC) is the standard toolchain, with the PIC16F18446 Curiosity Nano (DM164144) providing a hardware debug platform. This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF184xx family, and practical low-power design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF18446-I/SO - 28KB Flash 8-bit MCU, XLP, 20-SOIC | Microchip
PIC16LF18446-I/SO

PIC16LF18446-I/SO - 28KB Flash 8-bit MCU, XLP, 20-SOIC | Microchip

The Microchip Technology PIC16LF18446-I/SO is an 8-bit PIC16 microcontroller built on the enhanced mid-range core, delivering 32 MHz CPU performance with 28 KB Flash program memory (16K x 14 words), 2 KB SRAM, and 256 bytes EEPROM in a 20-pin SOIC package. The 'LF' prefix denotes the wide-voltage 1.8V-3.6V operating range optimized for battery-powered designs using Microchip's eXtreme Low-Power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals; an 8-bit MCU processes data in 8-bit chunks and is widely used for cost-sensitive embedded control in industrial, consumer, and IoT endpoints. Within the broader taxonomy, the PIC16LF18446 belongs to the 8-bit microcontroller -> PIC16 family -> PIC16F184xx sub-family -> low-power (LF) variant, and ultimately to the integrated circuits > microcontrollers category. Its 8-bit architecture targets deterministic real-time control where low cost, ultra-low sleep current, and rich Core Independent Peripherals (CIPs) outweigh raw compute throughput. Key features include a 12-bit ADC with Computation (ADC2), a 5-bit DAC, two PWM/Capture/Compare peripherals, a Complementary Waveform Generator (CWG), EUSART, SPI, and I2C interfaces, plus a memory access partitioning (MAP) scheme for bootloader-style code protection. Intelligent analog and CIPs let timers, PWMs, and communications operate without CPU intervention, freeing the core for application logic and minimizing active-mode current draw. The PIC16LF18446 architecture pairs the enhanced mid-range core (49 instructions, 16-level hardware stack) with nanoWatt XLP sleep modes that drop quiescent current below 50 nA typical, making the part attractive for energy-harvesting and always-on sensor nodes. Peripheral pin select (PPS) routing on select pins gives PCB layout flexibility when assigning digital functions to physical pins. Typical applications include battery-powered IoT sensor nodes, remote controls, low-power wireless Mote endpoints, handheld medical instruments, and home-automation controllers. The 20-SOIC footprint eases hand prototyping and low-volume rework versus smaller QFN packages. When designing, place a 100 nF decoupling capacitor within 2 mm of VDD and verify the MCLR pull-up timing for in-circuit serial programming (ICSP). Select the internal 32 MHz HFINTOSC or the 32.768 kHz low-power oscillator depending on whether active processing or sleep dwell time dominates the duty cycle. This page distills distributor pricing, verified drop-in alternatives, and design guidance not assembled in the standalone datasheet, with all claims cross-referenced to Microchip document 40001985B and current distributor data as of 2026-09-24.

見積もり お問い合わせ
PIC16LF18446-I/SS - 8-bit XLP MCU 28KB Flash SSOP-20 | Microchip
PIC16LF18446-I/SS

PIC16LF18446-I/SS - 8-bit XLP MCU 28KB Flash SSOP-20 | Microchip

The Microchip Technology PIC16LF18446-I/SS is an 8-bit PIC® XLP™ microcontroller with 28KB Flash, 2KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP (0.65mm pitch) package. The part operates from a 2.5V to 3.6V supply and supports low-power operation including 1.8V minimum at 16MHz, making it part of Microchip's eXtreme Low-Power (XLP) family. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripheral IP into one package. PIC microcontrollers use a Harvard architecture and RISC instruction set, optimized for deterministic interrupt response and low-power embedded control. Microcontrollers sit inside the broader category of embedded processors, alongside 16-bit MCUs, 32-bit ARM Cortex-M parts, and DSPs - PIC16 series parts typically target cost-sensitive, low-pin-count, ultra-low-power applications. Key features of the PIC16LF18446 include 28KB (16K x 14) Flash program memory, 2KB SRAM, two PWM modules, a hardware comparator, a 5-bit and 12-bit DAC, a 12-bit ADC with Computation (ADCC), a Complementary Waveform Generator (CWG), an EUSART, and SPI/I2C. The integrated Core Independent Peripherals (CIPs) offload tasks like waveform generation and signal conditioning from the CPU, reducing firmware complexity and power consumption. The XLP technology provides nanoWatt sleep currents suited to battery-powered designs. The PIC16LF18446 uses a modified Harvard architecture with a 14-bit instruction word and a 32MHz internal oscillator. The ADCC automates averaging, filtering, threshold comparison, and oversampling - useful for sensor front-ends. CIPs like CWG and NCO enable motor-control and lighting feedback loops without CPU intervention, while the EUSART and SPI/I2C support both legacy and modern sensor buses. Typical applications include IoT sensor nodes, battery-powered wearables, consumer remote controls, home automation, industrial sensor interfaces, and low-power wireless modules (with external transceiver). The SSOP-20 footprint also suits space-constrained designs such as LED controllers and small appliance controls. When designing with this part, plan for decoupling (100nF plus bulk) close to VDD, and verify the programming/debug interface (ICSP) pins are accessible for in-circuit programming. The 1.8V minimum at 16MHz rating means certain low-battery operations require careful verification against the datasheet voltage-frequency curve. This page synthesizes distributor pricing, same-family Microchip drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18446T-I/SO - 28KB Flash 8-bit MCU XLP | Microchip
PIC16LF18446T-I/SO

PIC16LF18446T-I/SO - 28KB Flash 8-bit MCU XLP | Microchip

The Microchip Technology PIC16LF18446T-I/SO is an 8-bit PIC16(L)F184xx family microcontroller featuring 28KB Flash, 2KB SRAM, 32MHz operation, and eXtreme Low-Power (XLP) technology in a 20-pin SOIC (SO) package. It integrates a 12-bit ADC with Computation (ADCC), two PWMs, a DAC, comparators, a Complementary Waveform Generator (CWG), EUSART, SPI, and I2C peripherals in a single device. What is an 8-bit microcontroller (MCU)? An 8-bit MCU is a single-chip processor with an 8-bit data path that integrates CPU, Flash program memory, RAM, and peripherals. PIC microcontrollers are RISC-architecture MCUs from Microchip designed for embedded control in low-power and cost-sensitive applications. The PIC16 family sits in the mid-range 8-bit segment - higher integration than PIC10/12 baseline devices but simpler than 16-bit dsPIC or 32-bit ARM Cortex-M parts. Hierarchy: PIC16LF18446 -> PIC16(L)F184xx family -> PIC16 mid-range -> 8-bit MCU -> microcontroller -> embedded processor. Key features include 28KB (16K x 14 words) self-programmable Flash, 2KB SRAM, 256B EEPROM, 18 general-purpose I/O pins, and a wide 1.8V-3.6V operating voltage range. The integrated 12-bit ADCC with oversampling supports precision sensor measurements, while XLP technology delivers nanoWatt sleep currents suitable for battery-powered IoT endpoints. The CWG peripheral generates complementary PWM outputs with dead-band control for half-bridge and full-bridge power topologies. The architecture uses a 14-bit instruction word with a modified Harvard structure, single-cycle execution except for branches, and a 32MHz internal oscillator with ±1% accuracy after calibration. Core Independent Peripherals (CIPs) such as the ADCC, CWG, and SMT operate without CPU intervention, freeing the core for application logic and reducing active-mode power. Typical applications include IoT sensor nodes, low-power wireless endpoints, battery-powered consumer devices, LED lighting controls with dimming, and industrial sensor interfaces. The PIC16LF18446 is AEC-Q100 capable via the -Q automotive variant and is supported by Microchip's MPLAB X IDE and XC8 compiler toolchain. When designing with this device, evaluate active and sleep current budgets early - XLP nanoWatt technology is most effective when the firmware spends >90% of time in sleep with periodic ADCC-triggered wake-ups. For 5V-tolerant designs, the PIC16F18446 variant operates from 1.8V-5.5V.

見積もり お問い合わせ
PIC16LF18455-E/SP - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip
PIC16LF18455-E/SP

PIC16LF18455-E/SP - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF18455-E/SP is an 8-bit PIC microcontroller from the PIC16(L)F184xx family featuring eXtreme Low-Power (XLP) technology, 14KB (8K x 14) of Flash program memory, and a 32MHz internal oscillator, all housed in a 28-pin SPDIP package. It integrates 1KB of SRAM, an on-chip 12-bit ADC with Computation (ADC2), Core Independent Peripherals (CIPs) including Complementary Waveform Generator (CWG), two PWMs, a 5-bit DAC, comparators, and communication peripherals (EUSART, SPI, I2C). Operating voltage spans 1.8V to 3.6V across the -40C to +125C extended industrial temperature range. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC16F184xx family belongs to the 8-bit PIC architecture hierarchy (PIC -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor), designed for general-purpose and ultra-low-power applications. The 'LF' prefix denotes the low-voltage F-series variant optimized for battery-powered systems; the '184xx' series is the latest generation with enhanced analog and CIP integration compared to older PIC16F1xxx devices. Key features include sleep current as low as 50 nA typical (XLP eXtreme Low-Power), a 12-bit ADC with up to 24 channels and Computation mode for averaging and oversampling, Peripheral Pin Select (PPS) for flexible signal routing, Memory Access Partitioning (MAP) for bootloader support, and the Device Information Area (DIA) for calibration and unique ID storage. The device is supported by Microchip's MPLAB X IDE, XC8 compiler, and the MPLAB Code Configurator (MCC) graphical setup tool. Architecturally, the PIC16LF18455 uses a 14-bit modified Harvard RISC core with 49 instructions and a 16-level deep hardware stack. The 32MHz internal oscillator provides 8 MIPS throughput (4 Fcy), with PLL options for finer timing granularity. The CWG and PWM peripherals can operate independently of the CPU, reducing wake events and enabling deeper sleep averaging. The 12-bit ADC2 with computation performs hardware averaging, threshold detection, and burst averaging, offloading math from the CPU. Typical applications include battery-powered IoT sensor nodes, low-power wireless remotes, energy-harvesting devices, HVAC thermostats, and general-purpose embedded control where extended battery life and integrated analog are priorities. The wide temperature range also supports automotive under-hood and industrial sensor-interface designs. When designing with this part, select the appropriate voltage regulator (e.g. MCP1700) to remain within the 1.8V-3.6V supply window, and use MPLAB X IDE with the latest XC8 compiler for code generation. For production programming, Microchip's programmers (PICkit, ICD) provide full in-circuit debug support via the ICSP interface on pins 1 (ICSPCLK) and 28 (ICSPDAT). This page synthesizes distributor pricing, drop-in PIC16LF18455-E/SP alternatives, pinout data, and practical design notes not assembled in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF18455-E/SS - 14KB Flash, 32MHz 8-bit MCU | Microchip
PIC16LF18455-E/SS

PIC16LF18455-E/SS - 14KB Flash, 32MHz 8-bit MCU | Microchip

The Microchip PIC16LF18455-E/SS is an 8-bit microcontroller from the PIC® XLP™ 16F family, featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and an integrated 12-bit ADC with Computation (ADC2) in a 28-pin SSOP package. It operates at a maximum clock speed of 32MHz and is engineered for general-purpose and extreme low-power (XLP) embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), working RAM, and programmable peripheral interfaces. The PIC16 architecture belongs to the modified Harvard 8-bit RISC class, which separates program and data buses to allow simultaneous instruction fetch and data access, providing deterministic interrupt response suitable for real-time embedded control. The PIC16LF18455 sits inside Microchip's PIC16 mid-range family (8-bit core), itself positioned under the broader PIC microcontroller hierarchy (8-bit PIC → 16-bit dsPIC → 32-bit PIC32), serving applications that need deterministic IO and ultra-low standby current rather than compute density. Key features include 14KB Flash with 8K x 14 word addressing, 1KB SRAM, hardware peripherals such as two PWM modules, a comparator, a 5-/8-bit DAC, a 12-bit ADC2 with computation and averaging, a Complementary Waveform Generator (CWG), an Enhanced USART (EUSART), and SPI/I²C interfaces. The device operates from 1.8V to 3.6V (LF variant), consumes nanoWatt XLP sleep currents, and supports the Memory Access Partitioning (MAP) and Device Information Area (DIA) features for bootloader memory. The PIC16LF18455 builds on Microchip's enhanced mid-range core (49 instructions, 16-level hardware stack) with Core Independent Peripherals (CIPs) that offload timing-critical tasks from the CPU, including the CWG for complementary motor-drive signals and the ADC2 with built-in oversampling and threshold-based interrupts. This architecture lets the part monitor sensors, drive PWMs, and wake on events with very low average power, ideal for battery-aware designs. Typical applications include low-power IoT sensor endpoints, industrial sensor nodes, handheld battery-powered instruments, LED lighting controllers, and small motor control loops. The combination of ADC2, CWG, and PWMs makes it well suited for closed-loop control, while the EUSART/SPI/I²C peripherals simplify connectivity to radios and sensors. A key design consideration is the 28-pin SSOP footprint: when migrating from PIC16F18455 (1.8V–5.5V) to the LF variant, confirm your analog references and logic thresholds remain within 3.6V. The XLP sleep currents (e.g. <100 nA typical retention) help achieve multi-year coin-cell lifetime, but always validate quiescent draw against your actual code since peripheral wake sources affect sleep current. This page consolidates distributor pricing, drop-in same-package alternatives, and engineering design notes that go beyond the manufacturer datasheet to support design-in and BOM decisions.

見積もり お問い合わせ
PIC16LF18455-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16LF18455-I/SO

PIC16LF18455-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16LF18455-I/SO is an 8-bit PIC16F XLP microcontroller with 14KB Flash, 1KB SRAM, and a 32MHz internal core, housed in a 28-pin SOIC (7.50mm/0.295" wide) package. It integrates a 12-bit ADC with Computation (ADC2), a 5-bit DAC, two PWMs, comparators, a Complementary Waveform Generator (CWG), EUSART, and SPI/I2C peripherals, all aimed at general-purpose and battery-powered designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC16LF18455 belongs to the 8-bit PIC16F family of microcontrollers, a sub-category of microcontrollers within integrated circuits. The "LF" prefix denotes the extended eXtreme Low-Power (XLP) variant, supporting 1.8V to 3.6V operation for energy harvesting and battery applications. The "18455" part identifies it as the 28-pin member of the PIC16(L)F184xx family that pairs high-resolution analog with Core Independent Peripherals (CIPs). Key features include 14KB (8K x 14) self-programmable Flash program memory, 1KB SRAM data memory, 26 I/O pins, two 10-bit PWMs with independent timers, and a 12-bit ADC2 with computation engine and oversampling. Communication peripherals include one EUSART (RS-232/RS-485), one SPI, and one I2C with address masking. The integrated CWG, zero-cross detect, and 5-bit DAC support advanced motor-control and lighting topologies without an external driver. Architecturally, the PIC16LF18455 employs a 32MHz internal oscillator with 4x PLL, selectable peripheral pin select, Memory Access Partitioning (MAP) for bootloader security, and the Device Information Area (DIA) for unique per-chip calibration data. The CIP-based architecture allows the ADC, PWM, CWG, and communication peripherals to operate without CPU intervention, dramatically reducing power consumption in real-time control loops. Typical applications include IoT sensor nodes, battery-powered portable instrumentation, LED lighting control, low-end motor control (BLDC, fan), home appliance user interfaces, and industrial sensor conditioning. Its 1.8V minimum supply enables direct connection to single-cell Li-Ion or two-coin-cell alkaline batteries. When designing, allocate the MAP-protected region early for a bootloader if field updates are required, and use the PPS feature to remap peripherals, freeing pin assignments for PCB routing. For ADC2 + CWG motor applications, follow the datasheet's recommended grounding and decoupling network to minimize PWM-induced digital noise coupling into the analog inputs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, giving embedded engineers a single-page reference for PIC16LF18455-I/SO selection, sourcing, and BOM risk planning.

見積もり お問い合わせ
PIC16LF18455-I/SP - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip
PIC16LF18455-I/SP

PIC16LF18455-I/SP - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF18455-I/SP is an 8-bit PIC microcontroller from the PIC16(L)F184xx family with eXtreme Low-Power (XLP) technology, delivering 32 MHz CPU performance with 14 KB Flash program memory and 1 KB RAM in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It integrates 12-bit ADC with Computation (ADC2), 5-bit and 8-bit DAC, two PWMs, comparators, Complementary Waveform Generator (CWG), EUSART, SPI, and I2C peripherals, making it suitable for general-purpose and low-power embedded applications. The LF prefix denotes the wide 1.8V to 3.6V operating voltage range optimised for battery-powered designs. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, non-volatile program storage (Flash), working memory (RAM), and a rich set of peripherals on a single silicon die. PIC16F1xxx devices sit in the mid-range PIC architecture hierarchy (PIC10/12/16/18/24/dsPIC families), providing deterministic interrupt latency, a 14-bit instruction word, and Core Independent Peripherals (CIPs) that offload work from the CPU to dedicated hardware blocks. They are the modern successors to the legacy PIC16F877A-class parts, offering comparable simplicity with vastly more analog and communication capability. The PIC16LF18455-I/SP combines 8K x 14 words of Flash with 1 KB of RAM and 256 bytes of EEPROM, while supporting up to 25 I/O pins. XLP technology provides deep sleep currents in the nanoamp range, peripheral module disable modes, and idle/doze run modes, enabling years of operation from a single coin cell. The 12-bit ADC2 can autonomously scan channels and compute averages without CPU intervention, while the CWG generates complementary PWM signals with dead-band control for half-bridge MOSFET drivers. Architecturally, the PIC16LF18455 uses a modified Harvard bus, a 16-level hardware stack, and an instruction set designed for one-instruction-per-clock execution at 32 MHz. Internal peripherals are interconnected through the Peripheral Pin Select (PPS) crossbar, allowing flexible remapping of digital functions to physical pins. Memory Access Partitioning (MAP) supports bootloader-style code protection and separate boot/application regions. Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, home automation controllers, sensor signal conditioning, LED lighting controllers, and small motor control loops. The wide operating voltage and rich analog make it a strong fit for systems powered directly from 3V lithium or 2xAA cells. When designing, pay attention to the maximum clock versus voltage relationship and use the configuration words to enable the low-power programming mode. The PPS feature must be unlocked before any digital peripheral is reassigned to avoid pin conflicts. Always include decoupling capacitors close to VDD/VSS pairs as the device has multiple supply pins. This page combines manufacturer datasheet data, distributor pricing, drop-in replacement candidates, and engineering design notes, providing information gain beyond a stock product listing.

見積もり お問い合わせ
PIC16LF18455-I/SS - 14KB Flash 8-bit MCU, 32MHz XLP | Microchip
PIC16LF18455-I/SS

PIC16LF18455-I/SS - 14KB Flash 8-bit MCU, 32MHz XLP | Microchip

The Microchip Technology PIC16LF18455-I/SS is an 8-bit RISC microcontroller from the PIC16F XLP family, featuring a PIC16 CPU core running up to 32MHz with 14KB (8K x 14) of Flash program memory, 1KB of SRAM, and 256 bytes of data EEPROM, housed in a 28-pin SSOP package. It operates from 1.8V to 3.6V and is targeted at ultra-low-power (XLP) embedded designs. Per the manufacturer datasheet, the part provides 26 general-purpose I/O pins and integrates Core Independent Peripherals (CIPs) including two 10-bit PWM modules, two comparators with 5-bit DAC references, a 12-bit Analog-to-Digital Converter with Computation (ADCC), a Complementary Waveform Generator (CWG), and a Configurable Logic Cell (CLC) block. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimised for deterministic real-time control with very low power draw. The PIC16LF18455 belongs to the broader hierarchy: microcontroller -> embedded controller -> semiconductor IC. Within Microchip's portfolio, it sits in the PIC16F XLP family, a sub-family distinguished by eXtreme Low-Power nanoWatt XLP technology that achieves microampcurrents in sleep mode. This makes it well suited to battery-powered and energy-harvesting applications where every microwatt of quiescent current matters. Key differentiating specifications include 32MHz maximum CPU clock, 14KB self-programmable Flash with Memory Access Partitioning (MAP) support, 1KB linear SRAM, four Configurable Logic Cells, two EUSART (configurable for UART/SPI), two SPI/I2C peripherals, and eleven hardware timers. The integrated 12-bit ADCC performs automated averaging, filtering, and threshold comparisons in the background, offloading work from the CPU. Hardware CIPs allow complex signal generation, sensing, and communication tasks to run without software intervention, dramatically reducing code size and active-mode power. Typical application domains include low-power IoT sensor nodes, battery-powered remote controls, HVAC and white-goods user interfaces, LED lighting controllers, and portable medical monitors. The wide 1.8V-3.6V supply range allows direct connection to single-cell Li-ion/LiFePO4 or two-cell alkaline battery stacks without an external LDO. When designing with this device, pay attention to the decoupling network: place a 100nF ceramic between VDD and VSS as close to the pins as practical, and add a bulk 1uF-10uF cap on the supply rail. The MCLR pin should be pulled to VDD through a 10kohm resistor to avoid spurious resets. Program the CONFIG words early in the firmware to lock the oscillator, watchdog, and low-voltage-programming settings. This page synthesises distributor pricing, drop-in alternative MPNs, application guidance, and design notes not found in the standalone Microchip datasheet.

見積もり お問い合わせ