集積回路

サブカテゴリ

📁 ADC/DAC 2,700+ 製品 📁 アンプIC 1,100+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 470+ 製品 📁 DSP 1,000+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6,800+ 製品 📁 インターフェースIC 2,200+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 360+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 19,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (35,000+)

PIC16LF18857-E/SS - 32MHz 8-bit MCU, 56KB Flash, 28-SSOP | Microchip
PIC16LF18857-E/SS

PIC16LF18857-E/SS - 32MHz 8-bit MCU, 56KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC16LF18857-E/SS is an 8-bit PIC16 XLP microcontroller delivering up to 32MHz CPU performance with 56KB Flash, 4KB SRAM, and 256 bytes EEPROM, housed in a 28-pin SSOP (5.30mm body) package. It features an integrated 10-bit ADC with computation (ADC2), Peripheral Pin Select (PPS), EUSART, two SPI/I2C modules, 11 timers, and up to 25 I/O lines for mixed-signal embedded designs. An 8-bit PIC microcontroller (MCU) is a small, low-power computer-on-a-chip built around a Harvard RISC core, executing one instruction per clock cycle. The PIC16 family sits in the middle of Microchip's 8-bit portfolio, balancing cost, peripherals, and code density; the LF sub-family extends that hierarchy into the XLP (eXtreme Low Power) tier for battery-powered applications. A 32MHz PIC16F/LF188xx MCU bridges the gap between baseline PIC10/PIC12 parts and the higher-pin-count PIC18/dsPIC families, making it a workhorse for sensor interfacing, motor control loops, and human-machine interfaces. Key features include 32MHz internal oscillator, 1.8V-3.6V wide VDD range, 256B data EEPROM, 4KB RAM, and Microchip's Peripheral Pin Select (PPS) which lets engineers remap digital peripherals to any I/O pin - greatly easing PCB routing. The 10-bit ADC2 with averaging, oversampling, and hardware accumulation simplifies sensor signal conditioning, while the integrated EUSART plus two SPI/I2C blocks support multiple communication buses simultaneously. The PIC16LF18857 is fabricated on CMOS technology with on-chip debug and In-Circuit Serial Programming (ICSP), supported by the MPLAB X IDE and XC8 compiler. With 32KB Flash for application code (the device advertises 56KB total Flash but only 32K x 14 words are user-addressable) and 4KB RAM for data buffers, it can host real-time operating systems, USB stacks via the serial interface, or firmware update bootloaders in the upper memory region. Typical applications include IoT sensor nodes, battery-powered industrial sensors, low-power motor control, LED lighting controllers, and consumer electronics interfaces. The XLP nanoWatt features (idle/doze/sleep modes) and 1.8V minimum supply suit coin-cell and energy-harvesting designs. When designing with this MCU, allocate sufficient Flash for bootloader + application partitions and budget I/O pins carefully because PPS flexibility trades against pin count - engineers should plan pin assignments in MPLAB Pin Manager before routing. The E suffix denotes the -40C to +125C extended industrial temperature grade, qualifying the part for outdoor, automotive-cockpit, and factory-floor deployments. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC16LF188xx family, and practical design notes for the 28-SSOP package, augmenting the manufacturer datasheet with engineering-oriented comparison data.

見積もり お問い合わせ
PIC16LF18857-I/SO - 56KB Flash 32MHz 8-bit MCU | Microchip
PIC16LF18857-I/SO

PIC16LF18857-I/SO - 56KB Flash 32MHz 8-bit MCU | Microchip

The Microchip Technology PIC16LF18857-I/SO is an 8-bit PIC16F-series microcontroller from the XLP (eXtreme Low-Power) family, delivering 56KB of Flash program memory and 32MHz CPU speed in a 28-pin SOIC package. It integrates a 10-bit ADC with computation (ADC2), configurable Peripheral Pin Select (PPS), two EUSART modules, and two SPI/I2C peripherals for mixed-signal and connected embedded designs. According to the Microchip product brief, this device family targets general-purpose and low-power applications where analog performance and communication flexibility are both required. What is a PIC16 8-bit microcontroller? A PIC16 is Microchip's mid-range 8-bit MCU architecture based on a 14-bit instruction set with a RISC-like Harvard core. PIC16 microcontrollers are used as the central controller in countless embedded products, from industrial sensors to consumer appliances. The XLP designation means this part supports sleep currents in the nanoamp range, deep-sleep retention, and active run currents below 100 uA/MHz, enabling years of battery life on coin-cell or lithium primary cells. Key features include 256B of EEPROM data memory, 4KB of SRAM, up to 25 channels of 10-bit ADC2, 5-bit DAC, configurable logic cells (CLC), numerically controlled oscillator (NCO), complementary waveform generator (CWG), and zero-cross detect. The Peripheral Pin Select (PPS) allows nearly every digital peripheral to be remapped to a wide range of I/O pins, simplifying PCB routing. Hardware limit timers, windowed watchdog, and cyclic redundancy check (CRC/SCAN) provide functional-safety hooks for IEC 61508 SIL-2 capable designs. The PIC16LF18857 uses a modified Harvard core with hardware multiplier and 49 instructions, including bit-oriented operations that map cleanly to C-compiled code. With 32MHz internal oscillator accuracy of +/- 1% over the industrial temperature range and 1.8V to 3.6V VDD operation, the device eliminates external crystals in most designs and integrates critical analog directly on-chip, reducing BOM cost. Typical applications include battery-powered IoT sensor nodes, industrial process transmitters, low-power wireless Mote nodes, consumer white goods, HVAC controllers, medical handheld instruments, and automotive body electronics sub-modules. The 10-bit ADC2 with hardware averaging and oversampling makes it especially useful for bridge-sensor signal conditioning. When designing with the PIC16LF18857-I/SO, reserve an RC network on MCLR for clean reset, decouple VDD with 100nF + 1uF ceramics, and consult MPLAB Code Configurator (MCC) plug-ins to generate peripheral initialization code. Programming is supported over ICSP using PICkit 4 or MPLAB Snap debuggers, and code may be developed in MPLAB X IDE with XC8 compiler.

見積もり お問い合わせ
PIC16LF18857-I/SP - 8-bit 32MHz MCU 56KB Flash 28-SPDIP | Microchip
PIC16LF18857-I/SP

PIC16LF18857-I/SP - 8-bit 32MHz MCU 56KB Flash 28-SPDIP | Microchip

The Microchip PIC16LF18857-I/SP is an 8-bit PIC16 microcontroller in the eXtreme Low Power (XLP) family, featuring a 32MHz internal oscillator, 56KB (32K x 14 words) of Flash program memory, 4KB RAM and 256 bytes of EEPROM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the PIC16(L)F1885X/7X family that combines Analog, Core Independent Peripherals (CIPs) and communication peripherals, with the LF variant supporting an extended 1.8V to 3.6V operating range optimised for battery-powered designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces onto one piece of silicon. PIC microcontrollers use a modified Harvard RISC architecture that decouples the program bus from the data bus, allowing the CPU to fetch instructions from Flash while simultaneously reading or writing data RAM in the same cycle. Within the power management IC hierarchy, the PIC16LF18857 sits as a general-purpose low-power MCU family member, derived from the PIC16 8-bit core lineage and positioned between the smaller PIC16F1xxx and the higher-pin-count PIC18 and dsPIC33 lines. The device integrates a 10-bit ADC with computation (ADC2), a complementary waveform generator (CWG), numerically controlled oscillator (NCO), configurable logic cells (CLC), zero-cross detect (ZCD) and a hardware limit timer (HLT). Communication peripherals include EUSART (LIN-capable), two SPI and two I2C. The Peripheral Pin Select (PPS) feature allows most digital peripherals to be routed to virtually any I/O pin, dramatically simplifying PCB layout for the 28-SPDIP footprint. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power instrumentation, lighting controls, home appliances and automotive body electronics where the 32MHz core, generous peripheral set and XLP sleep currents in the nanoamp range combine to deliver long battery life with single-MCU BOM integration. Designers should use the MPLAB X IDE and XC8 compiler; the on-board debug header (ICSP) supports the MPLAB PICkit, Snap or ICD programmers. Pay attention to the LF vs F suffix when sourcing: the F variant covers 2.3V-5.5V while the LF supports 1.8V-3.6V - substituting one for the other requires checking the minimum VDD for the application. This page synthesises distributor pricing, drop-in same-package alternatives from the same PIC16F1885X/7X family, and practical design notes not collected in any single datasheet, helping engineers and buyers make faster, better-grounded decisions for new designs and reorders.

見積もり お問い合わせ
PIC16LF18857-I/SS - 32MHz 8-bit MCU 56KB Flash XLP | Microchip
PIC16LF18857-I/SS

PIC16LF18857-I/SS - 32MHz 8-bit MCU 56KB Flash XLP | Microchip

The Microchip PIC16LF18857-I/SS is an 8-bit PIC16 microcontroller featuring 56KB (32K x 14 words) of Flash program memory, 32MHz CPU clock, and eXtreme Low-Power (XLP) technology, housed in a 28-pin SSOP (SS) package. The 'LF' prefix denotes the wide-voltage 1.8V-3.6V operating range optimized for battery-powered designs, and the 'I' suffix indicates the industrial -40C to +85C temperature grade. The PIC16(L)F1885x/7x family combines Core Independent Peripherals (CIPs) with rich analog and communication peripherals for general-purpose and low-power applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a configurable set of on-chip peripherals behind a single bus. The PIC16 is an 8-bit modified Harvard RISC architecture from Microchip; it sits within the broader hierarchy: PIC16 -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. XLP variants ('F' part numbers with the low-voltage core) target sleep currents below 1 uA, suiting coin-cell and energy-harvesting designs. Key features of the PIC16LF18857 include 256 bytes of EEPROM data memory, a 10-bit ADC with computation (ADC2), Peripheral Pin Select (PPS) for flexible signal routing, and communication peripherals covering EUSART, two SPI and two I2C interfaces. The device integrates hardware CIP blocks such as the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect (ZCD) that offload tasks from the core and reduce code size and power consumption. Architecturally, the PIC16LF18857 uses Microchip's enhanced mid-range core with a 14-bit instruction word and 32MHz internal oscillator, supporting up to 16 MIPS. The CIP-rich analog chain (10-bit ADC, two comparators, fixed-voltage reference and DAC) lets engineers implement sensor conditioning, motor timing and lighting control without external components. PPS remaps digital peripherals to virtually any I/O pin, simplifying PCB layout. Typical applications include low-power IoT sensor nodes, battery-powered medical devices, home-automation controllers, LED lighting and signage controls, and industrial sensor interfaces. The combination of 56KB Flash, PPS flexibility and XLP sleep current makes it well suited for designs that need both rich peripheral integration and years of battery life. When designing with this MCU, choose the LF variant for systems running below 3.6V and select the F variant (PIC16F18857) when 5V rails are required. Decoupling the VDD/AVDD pins with 100nF ceramic capacitors placed within a few millimetres of each pin is recommended, and unused I/O should be configured as outputs low to minimise sleep current. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC16F1885x/7x family, and practical design notes that complement the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18857T-I/SO - 8-bit XLP MCU, 56KB Flash, 28-SOIC | Microchip
PIC16LF18857T-I/SO

PIC16LF18857T-I/SO - 8-bit XLP MCU, 56KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16LF18857T-I/SO is an 8-bit PIC® XLP™ microcontroller featuring 56KB Flash program memory, 32MHz operation, and a 28-pin SOIC package tailored for low-power embedded designs. The "LF" prefix denotes the wide 1.8V to 3.6V operating voltage range, while the "XLP" branding highlights Microchip's eXtreme Low Power technology for battery-driven and energy-harvesting applications. A PIC® microcontroller is a RISC-based 8-bit MCU built around the PIC16 instruction set, used widely for sensor interfacing, motor control, and small-form-factor consumer/industrial products. PIC16F/LF188xx parts sit one tier below the PIC18 family and target designs that need more analog and digital peripherals than a PIC10/12/16F1xxx device but less MIPS than a dsPIC or PIC32. Within Microchip's catalog, the PIC16LF1885x/7x series is positioned as the mainstream Low Pin Count (LPC) controller with a rich mix of CIP (Core Independent Peripherals). Key features include 56KB (32K × 14 words) self-programmable Flash, 4KB RAM, 256-byte EEPROM, a 10-bit ADC with Computation, two 10-bit DACs, two comparators, a complementary waveform generator with 4 outputs (CWG), multiple PWMs (CCP, ECCP), a hardware RTCC, an EUSART, two MSSP (SPI/I2C) modules, and 25 GPIOs. The device also integrates Peripheral Pin Select (PPS) so peripherals can be remapped to nearly any I/O. A 32MHz internal oscillator reduces external component count. Architecturally, the PIC16LF18857T-I/SO leverages an enhanced mid-range core with a 14-bit instruction word, a 31-level hardware stack, and interrupt-driven control with atomic CIP operations that let the MCU react to analog and timing events without waking the CPU. DSM, CLC, NCO, and Configurable Logic Cell peripherals assist in real-time signal conditioning. Typical applications include IoT edge nodes (LoRa/Zigbee host MCUs), battery-powered sensor hubs, low-power instrumentation with on-screen feedback, appliance control (white goods, coffee machines), USB/HID bridges when paired with an external transceiver, automotive interior lighting and body controllers (AEC-Q100 variants available separately), and small medical wearables. Trade-offs: 8-bit core limits floating-point math, so heavy DSP work should move to a dsPIC33 or PIC32. Design tip: place a 100nF decoupling capacitor within 5mm of each VDD pin and add a bulk 10µF + 1µF pair near the IC. Always configure the unused I/O pins as digital low-output to minimize quiescent current, and use the nMCLR pin with a 10kΩ pull-up plus a 100nF cap to ground for clean reset behavior. This page synthesizes datasheet highlights, current distributor pricing, drop-in Microchip variants, and practical design notes not collated in one place by the manufacturer.

見積もり お問い合わせ
PIC16LF18875-E/ML - 8-Bit 32MHz XLP MCU 14KB Flash | Microchip
PIC16LF18875-E/ML

PIC16LF18875-E/ML - 8-Bit 32MHz XLP MCU 14KB Flash | Microchip

The Microchip Technology PIC16LF18875-E/ML is an 8-bit PIC microcontroller belonging to the PIC16(L)F1885X/7X family with XLP (eXtreme Low Power) technology, delivering 32MHz CPU performance with 14KB Flash program memory in a 44-pin QFN (8x8 mm) package. It integrates 1KB RAM, 256B EEPROM, Core Independent Peripherals (CIP), and communication peripherals optimized for general-purpose and low-power embedded applications. The device combines analog peripherals, configurable logic cells, and enhanced mid-range 8-bit CPU core to deliver deterministic real-time control. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable peripherals (ADC, timers, communication interfaces) on one die. The PIC16LF18875 sits within the hierarchy: microcontroller -> 8-bit MCU -> PIC16 family -> PIC16LF188xx sub-family -> low-power (LF) variant. The LF prefix denotes the wide-voltage (1.8V-3.6V) process, while the standard PIC16F18875 variant operates at 2.3V-5.5V. The 8-bit PIC16 architecture uses a Harvard RISC core with a 14-bit instruction word optimized for C and assembly code density. Key features include eXtreme Low Power XLP technology with sub-uA sleep currents, hardware CRC/SCAN and HLT (Hardware Limit Timer) peripherals, multiple 10-bit ADC channels, enhanced PWM modules, and interfaces including I2C, SPI, and EUSART. The 44-QFN package supports up to 36 I/O pins with 5V-tolerant I/O on most pins, enabling direct interface to 5V peripherals from a 3.3V supply. The PIC16LF18875 architecture combines a 32MHz internal oscillator with a 4x PLL, Configurable Logic Cells (CLC) for hardware glue logic, Complementary Waveform Generator (CWG), and Zero-Cross Detect (ZCD) module. The integrated peripheral pin select (PPS) provides flexible signal routing to any digital I/O pin. Together these features reduce BOM cost and PCB area in mixed-signal designs. Typical applications include IoT sensor nodes, battery-powered industrial sensors, home automation controllers, low-power wireless modules, and consumer electronics with touch or LED driving. The wide operating voltage range (1.8V-3.6V) makes it suitable for single-cell Li-ion or two-AA battery systems. Designers select this part when they need 8-bit simplicity with modern CIP peripherals and sub-uA standby current for energy-harvesting or battery-backed applications. When designing with the PIC16LF18875-E/ML, ensure the QFN exposed pad is soldered to a sufficient copper pour for thermal dissipation and electrical ground reference. Use MPLAB X IDE with XC8 compiler for code development, and configure the PPS module to map peripherals to pins without hardware rework. This page synthesizes distributor pricing across 7 channels, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single source for PIC16LF18875-E/ML evaluation.

見積もり お問い合わせ
PIC16LF18875-E/MV - 8-Bit XLP MCU 14KB Flash 40-UQFN | Microchip
PIC16LF18875-E/MV

PIC16LF18875-E/MV - 8-Bit XLP MCU 14KB Flash 40-UQFN | Microchip

The Microchip Technology PIC16LF18875-E/MV is a low-power 8-bit PIC16 microcontroller from the PIC16(L)F1885X/7X family, featuring 14KB Flash program memory, 1KB SRAM, 256B EEPROM and a 32 MHz internal oscillator. It is housed in a 40-pin UQFN (MV) 5x5 mm package and integrates Core Independent Peripherals (CIPs) alongside eXtreme Low Power (XLP) technology. The device combines Analog, CIPs and communication peripherals to support a wide range of general-purpose and low-power applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, I/O ports and on-chip peripherals such as timers, ADC, communication interfaces and clock generation. 8-bit MCUs like the PIC16F18875 sit at the entry level of embedded computing, optimised for cost-sensitive and deterministic real-time control tasks where power consumption, code simplicity and peripheral integration matter more than raw compute throughput. XLP variants add sleep currents below 1 uA and multiple power-saving modes for battery-operated designs. Key features of the PIC16LF18875 include 36 I/O pins, a 10-bit ADC, two 8-bit DACs, two comparators, PWM/SCCP/MCCP capture-compare-PWM modules, MSSP supporting SPI and I2C, an EUSART for UART, and a CRC/SCAN engine for memory integrity. The device operates from 1.8V to 3.6V with active current in the microamp range when peripheral functions are selectively disabled. Its instruction set is fully backward-compatible with the mid-range PIC16 core, and the CIPs allow functions like signal conditioning, waveform generation and sensor interfacing to run without CPU intervention. Typical applications include IoT sensor nodes, battery-powered wireless controls, wearables, home automation peripherals, low-end consumer electronics, and industrial sensor interfaces. The wide peripheral set and 32 MHz performance enable tasks such as driving LED matrices, scanning keypads, decoding sensor protocols, and managing low-power RF links. When designing with the PIC16LF18875, plan pin allocation carefully because the 40-pin UQFN shares several peripheral functions on alternate pins. Use Microchip's MPLAB X IDE and the XC8 compiler for development, and verify sleep current budgets early because I/O pin leakage and weak pull-ups can dominate in deep-sleep designs. This page combines distributor pricing, drop-in alternatives and engineering design notes not consolidated on the manufacturer datasheet, giving procurement and design engineers a single reference for evaluation.

見積もり お問い合わせ
PIC16LF18875-E/P - 14KB Flash 8-bit MCU, 32MHz, 40-PDIP | Microchip
PIC16LF18875-E/P

PIC16LF18875-E/P - 14KB Flash 8-bit MCU, 32MHz, 40-PDIP | Microchip

The Microchip Technology PIC16LF18875-E/P is a 32 MHz 8-bit PIC16F microcontroller IC with 14KB (8K x 14) of Flash program memory, 1KB of SRAM, and 256 bytes of EEPROM, housed in a 40-pin PDIP through-hole package. It belongs to the PIC16(L)F1885X/7X family, which combines Core Independent Peripherals (CIPs) such as CRC/SCAN and HLT with eXtreme Low Power (XLP) technology for general-purpose and low-power designs. The "LF" prefix denotes the wide-voltage, low-power variant optimized for battery-backed applications operating from 1.8 V to 3.6 V. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals. The PIC16LF18875 sits in the taxonomy: PIC microcontroller -> 8-bit PIC -> mid-range PIC16 -> enhanced mid-range PIC16F188xx -> low-power "LF" variant. The 8-bit CPU executes one instruction per clock cycle (4 clocks for branches) from on-chip Flash, while dedicated hardware blocks handle timing, communication, and analog sampling in parallel without CPU intervention, simplifying real-time firmware and lowering average power. Key features include up to 14 KB self-programmable Flash, 1 KB SRAM, 256 B EEPROM, an integrated 10-bit ADC with computation, multiple PWM/Capture/Compare channels, an on-chip temperature indicator, and the XLP suite (IDLE/DOZE/sleep modes with nanoWatt technology). The 40-pin PDIP variant also exposes the full 36-pin I/O complement plus two oscillator pins, with nanoWatt XLP reducing active current to roughly sub-100 µA/MHz in many configurations. The device uses Microchip's enhanced mid-range 8-bit core, which adds hardware multiply, larger linear program memory addressing, and CIP blocks such as the Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG), and Configurable Logic Cell (CLC). These offload waveform synthesis, signal modulation, and glue logic from the core, freeing CPU cycles for application code and enabling deterministic timing without software loops. Typical applications include industrial sensor nodes, low-power IoT edge devices, battery-backed smart meters, automotive interior modules, and consumer white-goods user interfaces. The extended -40C to +125C operating range and through-hole PDIP package suit retrofit designs, prototyping, and harsh-environment installations where socketed servicing is preferred. When designing with this part, budget for ICD/debug header access on the PCB and confirm adequate decoupling (100 nF plus 1-10 uF bulk) at VDD and AVdd. The 40-pin PDIP footprint also enables drop-in upgrade from legacy PIC16F887 and PIC16F1939 designs. This page synthesizes distributor pricing, drop-in package-compatible alternatives within the PIC16LF188xx family, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18875-E/PT - 8-Bit MCU, 14KB Flash, 32MHz, 44-TQFP | Microchip
PIC16LF18875-E/PT

PIC16LF18875-E/PT - 8-Bit MCU, 14KB Flash, 32MHz, 44-TQFP | Microchip

The Microchip Technology PIC16LF18875-E/PT is an 8-bit PIC® XLP™ 16F microcontroller delivering 32 MHz CPU performance, 14 KB Flash program memory, 1 KB RAM and 256 bytes of EEPROM in a 44-pin TQFP (10x10 mm) package. It is part of the PIC16(L)F1885X/7X family and combines analog peripherals, Core Independent Peripherals (CIPs), and communication interfaces with eXtreme Low Power (XLP) technology for energy-efficient embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and integrated CPU, memory, and peripherals. Within the system hierarchy it sits below 16-bit and 32-bit MCUs and is widely used in cost-sensitive, deterministic, low-power applications such as sensor nodes, consumer appliances, and IoT edge devices. The PIC16LF18875-E/PT belongs to the PIC® XLP™ 16F family, which extends the broader 8-bit PIC® line by adding hardware CIPs, multiple communication peripherals and ultra-low-power sleep modes for battery-powered products. Key features include 36 general-purpose I/O pins, multiple 10-bit ADC channels, comparators, PWMs, a hardware CRC/SCAN engine, HLT (Hardware Limit Timer), and communication peripherals such as EUSART, I2C and SPI. The on-board 32 MHz internal oscillator eliminates the need for an external crystal in many designs, while the XLP sleep current extends battery life in always-on IoT and wearable applications. The 44-pin TQFP package provides a 10x10 mm footprint with ample routing for analog and digital interfaces. The architecture integrates a RISC core with deterministic single-cycle instruction execution, configurable clock sources from 31 kHz LFINTOSC up to 32 MHz HFINTOSC, and a flexible peripheral pin-select (PPS) system that allows remapping of digital functions to almost any I/O pin. This simplifies PCB layout, shortens design cycles and supports migration between PIC16 family members without re-routing the board. Typical applications include IoT sensor nodes, battery-powered consumer devices, industrial control, automotive body and lighting modules, smart home edge controllers, and low-power wireless sensor hubs. Designers choose this part for cost-sensitive designs that still require robust analog integration, hardware CIPs and ultra-low-power sleep current. Designers should note the LF prefix designates the 1.8V-3.6V wide operating voltage range and XLP low-power modes; pair the device with a properly decoupled VDD/AVDD pair (typically 100 nF + 1 µF) and reserve ICSP™ pins (ICSPCLK/ICSPDAT) for in-circuit programming and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18875-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 44-QFN | Microchip
PIC16LF18875-I/ML

PIC16LF18875-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 44-QFN | Microchip

The Microchip Technology PIC16LF18875-I/ML is an 8-bit PIC® microcontroller from the PIC16(L)F1885X/7X family, delivering 32 MIPS performance with a 32 MHz internal oscillator, 14 KB (8K x 14 words) of Flash program memory, 1 KB of RAM, and 256 bytes of EEPROM in a 44-pin QFN (8x8 mm) package with exposed pad. The LF prefix denotes the low-power F-version, optimized for battery and energy-harvesting designs through the XLP (eXtreme Low Power) technology platform, with operating voltage from 1.8 V to 3.6 V. What is a PIC16LF microcontroller? The PIC16LF series is a low-power variant of Microchip's mid-range 8-bit PIC16 architecture, distinguished from standard PIC16F parts by an extended low-voltage operating range (down to 1.8 V) and power-management features targeted at portable and IoT designs. Within the broader microcontroller hierarchy, PIC16LF18875 sits under: PIC16 > mid-range 8-bit core > PIC16LF family > PIC16LF1885X/7X sub-family, sharing the same instruction set and peripheral IP as its PIC16F counterparts while adding deep-sleep current typically in the nanoampere range. Key features include Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Data Signal Modulator (DSM), which let designers offload timing-critical tasks from the CPU. Communication peripherals cover two I2C/SPI interfaces and two UART modules with LIN support. The 12-bit ADC with Computation (ADC²) automates averaging, oversampling, and threshold comparisons, and the device integrates a 10-bit DAC, comparators, and zero-cross detection. Technical depth: The PIC16LF18875 uses the enhanced mid-range 16-bit instruction set with a 14-bit program word and 32 MHz internal oscillator. It carries four 16-bit timers, four CCP/ECCP modules, an HF-LF internal oscillator with active clock tuning, a windowed watchdog timer, and a hardware CRC/SCAN for memory integrity. The 44-QFN package exposes additional I/O pins (up to 36 general-purpose I/O) versus smaller PIC16LF188x siblings, supporting parallel and simultaneous peripheral operation. Typical applications include low-power IoT sensor nodes, battery-powered home automation, consumer appliances with touch or LED-matrix HMIs, automotive body and interior modules (non-safety), and industrial sensor interfaces. The 1.8 V minimum VDD lets designers connect directly to single-cell alkaline, NiMH, or coin-cell supplies without external boost converters. Design consideration: When migrating from PIC16F18875 to PIC16LF18875, verify that your application stays within the 1.8 V to 3.6 V window. The exposed pad of the 44-QFN must be soldered to a sufficiently large copper pour for thermal dissipation, and unused pins should be configured as outputs low to minimize current draw in sleep. This page synthesizes Microchip catalog data, distributor pricing, same-family drop-in alternatives, and engineering design notes not consolidated in any single vendor page.

見積もり お問い合わせ
PIC16LF18875-I/MV - 8-Bit 32MHz XLP MCU 14KB Flash 40-UQFN
PIC16LF18875-I/MV

PIC16LF18875-I/MV - 8-Bit 32MHz XLP MCU 14KB Flash 40-UQFN

The Microchip Technology PIC16LF18875-I/MV is an 8-bit PIC16 microcontroller from the XLP family, delivering 32 MHz CPU performance with 14 KB Flash, 1 KB RAM and 256 B EEPROM in a 40-pin UQFN (5x5 mm) package. It targets ultra-low-power applications that require rich analog and digital peripherals while running from a 1.8 V to 3.6 V supply. The "LF" prefix designates the low-power F-series core, and the "I" suffix specifies the industrial temperature range of -40 °C to +85 °C. An 8-bit microcontroller (MCU) is a self-contained computing subsystem on a single silicon die that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), EEPROM, and a mix of analog and digital peripherals. The PIC16F188xx family sits at the intersection of the PIC microcontroller hierarchy: PIC16 -> mid-range 8-bit MCU -> Microchip 8-bit portfolio -> Microcontrollers -> Integrated Circuits. The "XLP" designation indicates eXtreme Low Power peripheral design, including nanoWatt XLP technology that lets the device sleep in the nanoamp range while retaining state. Key features include a 10-bit ADC with computation (ADC2), a 5-bit/8-bit DAC, comparators, PWM, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), HLT (Hardware Limit Timer), WWDT (Windowed Watchdog Timer), SCAN/CRC, ZCD (Zero-Cross Detect), PPS (Peripheral Pin Select), EUSART, and SPI/I2C. The wide peripheral set reduces external component count and BOM complexity. This part is suited for ultra-low power 4-20 mA analog, electronics metering, low-power wireless power system control, energy harvesting, and general-purpose 8-bit embedded systems. The active NV meter buffer and pin select offer both active-high enable.

見積もり お問い合わせ
PIC16LF18875-I/P - 32MHz 8-bit MCU 14KB Flash 40-PDIP | Microchip
PIC16LF18875-I/P

PIC16LF18875-I/P - 32MHz 8-bit MCU 14KB Flash 40-PDIP | Microchip

The Microchip Technology PIC16LF18875-I/P is a 32 MHz 8-bit PIC® XLP™ microcontroller with 14 KB (8K x 14) flash program memory, 1 KB RAM, and 256 bytes EEPROM, housed in a 40-pin PDIP (Plastic Dual In-line Package) with industrial -40C to +85C temperature rating. It belongs to the PIC16F188xx family of enhanced mid-range core MCUs and operates from a wide 1.8V to 3.6V supply voltage, drawing only nanoamp sleep currents thanks to the eXtreme Low Power (XLP) technology. The device integrates rich on-chip peripherals: a 10-bit ADC with computation, a 5-bit/8-bit DAC, comparators, PWM, CWG, SMT signal measurement timer, HLT hardware limit timer, WWDT windowed watchdog, SCAN/CRC, ZCD zero-cross detect, PPS peripheral pin select, EUSART, SPI, and I2C. IDLE, DOZE, and PMD power-management modes further reduce active consumption. The part is suitable for both battery-powered and line-powered embedded applications where low active and standby power are required. A microcontroller is a single-chip computer that integrates a CPU core, program memory (flash), data memory (RAM), non-volatile storage (EEPROM), and a rich set of peripheral blocks (ADC, timers, communication ports, PWM). It sits in the system hierarchy at the embedded-controller tier, above simple logic ICs and below full microprocessors with external memory buses. The 8-bit PIC16 architecture uses a Harvard design with separate program and data buses, RISC instruction set, and a deterministic interrupt latency that engineers have trusted for decades. Within the PIC family tree, the LF 'F' lower-power variants extend battery life in wireless sensor, metering, and IoT nodes, while the '18875' part number identifies the specific combination of memory, peripherals, and pin count. The 'I/P' suffix denotes the industrial temperature grade (-40C to +85C) and PDIP-40 through-hole package, preferred for prototypes, hobby projects, and industrial control modules where socketed or hand-soldered assembly is required. Key features include a 32 MHz internal oscillator (8 MIPS instruction throughput), 14 KB self-programmable flash with code protection, 1 KB RAM with XLP retention mode, 256 bytes EEPROM, 10-bit ADC with computation (ADC2) that performs averaging and threshold comparison in hardware, and Peripheral Pin Select (PPS) that remaps digital peripherals to any I/O pin. The XLP technology delivers typical sleep currents below 50 nA with RTC and watchdog running, enabling multi-year coin-cell operation. Integrated Core Independent Peripherals (CIPs) such as the CWG, NCO, and SMT offload timing-critical tasks from the CPU and reduce firmware complexity. This part is widely used in low-power sensor nodes, IoT endpoints, battery-powered instrumentation, industrial controllers, automotive body and interior subsystems, home appliances, and consumer electronics. The wide operating voltage range, robust peripheral set, and PDIP form factor make it especially attractive for through-hole prototyping, breadboarding, and educational applications, while the LF low-voltage rating suits 2xAA / 3xAAA / coin-cell designs. When designing with this device, ensure the ICSP programming pins (RB6/ICSPDAT, RB7/ICSPCLK) are accessible on the PCB, configure PPS carefully during firmware bring-up, and keep unused I/O pins configured as outputs to minimize quiescent current. The MPLAB X IDE with XC8 compiler is the standard toolchain.

見積もり お問い合わせ
PIC16LF18875T-I/PT - 32MHz 8-bit XLP MCU 14KB Flash | Microchip
PIC16LF18875T-I/PT

PIC16LF18875T-I/PT - 32MHz 8-bit XLP MCU 14KB Flash | Microchip

The Microchip PIC16LF18875T-I/PT is a 32 MHz 8-bit PIC microcontroller from the PIC16F18855/7X family, delivering 14 KB (8K x 14) of Flash program memory, 1 KB of SRAM, and 256 bytes of EEPROM in a 44-pin TQFP (10x10) package with tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals. Within the broader taxonomy, the PIC16LF18875 belongs to the 8-bit microcontroller category, then the PIC16 family of mid-range devices, then Microchip's eXtreme Low Power (XLP) line optimized for battery-operated applications. This hierarchy matters to AI knowledge graphs because it captures both the silicon architecture (Harvard/modified RISC) and the application positioning. Key features include up to 32 MHz operation, an operating voltage range of 1.8 V to 3.6 V (the LF low-voltage variant), a 10-bit ADC with computation, a 5-bit DAC, four 10-bit PWM modules, and Core Independent Peripherals (CIPs) such as CWG, NCO, and CRC/SCAN. The device also offers configurable logic cells, multiple communication interfaces (I2C, SPI, UART with LIN), and 36 source/sink capable I/O pins. The XLP technology enables nanoWatt sleep currents under 60 nA typical. The architecture uses a 14-bit instruction word modified Harvard RISC core with a two-stage pipeline, allowing most instructions to execute in one cycle. This delivers up to 16 MIPS throughput at 32 MHz. The 14-bit instruction width uniquely suits compact code density, while the 8-bit data path keeps peripherals simple and low cost. Designers benefit from the peripheral pin select (PPS) feature that remaps digital I/O functions to almost any pin. Typical applications include consumer IoT sensor nodes, battery-powered medical wearables, automotive interior controls (a non-automotive grade part), industrial low-power telemetry, and home automation hubs. The wide 1.8–3.6 V range and integrated peripherals also suit wearable fitness bands and remote control designs. A primary design trade-off is between Flash endurance (typically 10K erase/write cycles) and long-life data logging requirements; use external EEPROM for high-write scenarios. Tape-and-reel (the "/T" suffix) mandates careful MSL-3 handling to avoid moisture-induced solder defects during reflow. This page synthesizes live distributor pricing, drop-in same-package alternatives from Microchip's PIC16F18875 family, and practical design notes not found in the datasheet summary alone.

見積もり お問い合わせ
PIC16LF18876-E/ML - 8-bit XLP MCU 28KB Flash 32MHz | Microchip
PIC16LF18876-E/ML

PIC16LF18876-E/ML - 8-bit XLP MCU 28KB Flash 32MHz | Microchip

The Microchip Technology PIC16LF18876-E/ML is an 8-bit PIC® XLP™ 16F microcontroller with 28KB (16K x 14) Flash program memory, 32MHz CPU speed, and a 44-pin QFN (8x8) package with exposed thermal pad. It is part of the PIC16(L)F1885X/7X family and is engineered for low-power general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable peripherals on a single die. The PIC16LF18876 belongs to Microchip's enhanced mid-range 8-bit core family, occupying the tier above baseline PIC10/12/16 and below the 16-bit dsPIC/PIC24 families. Its XLP (eXtreme Low Power) designation indicates that the device was designed with sleep currents, wake-up sources, and active-mode efficiency as primary specifications rather than afterthoughts. Within the broader PIC taxonomy, the 16F prefix denotes a Flash-based, general-purpose 8-bit part with 14-bit instruction word. Key features include 2KB RAM, 256B EEPROM, 36 configurable I/O, an integrated 10-bit ADC, 5-/8-bit DAC, comparators, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, and 2xSPI/I2C peripherals. The LF prefix denotes an extended low-voltage operating range down to 1.8V, while the standard F variants operate from 2.3V to 5.5V. Multiple low-power modes (Idle, Doze, Sleep) support battery-friendly applications. The device uses Microchip's Core Independent Peripherals (CIPs) — CWG, SMT, and SCAN/CRC — that execute without CPU intervention, freeing the core for power management and reducing average current consumption. The Peripheral Pin Select (PPS) remapping block allows flexible routing of digital peripherals to any I/O, simplifying PCB layout when the 44-QFN footprint is shared across variant designs. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, battery-powered industrial instrumentation, home automation controllers, and capacitive-touch user interfaces. The combination of 28KB Flash, 2KB RAM, and rich analog/digital peripherals suits it for protocol translation, sensor aggregation, and simple closed-loop control tasks. When designing with this part, take advantage of the PPS module to route signals without board rework, and use the SCAN/CRC peripheral to validate Flash integrity in safety-sensitive applications. For deeper power reduction, leverage the XLP Sleep mode with peripheral wake-up rather than polling in the main loop. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF18876-E/MV - 28KB Flash 8-bit MCU 40-UQFN | Microchip
PIC16LF18876-E/MV

PIC16LF18876-E/MV - 28KB Flash 8-bit MCU 40-UQFN | Microchip

The Microchip Technology PIC16LF18876-E/MV is an 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family, featuring 28KB (16K × 14) of Flash program memory, 2KB of RAM, and 256 bytes of EEPROM in a 40-pin UQFN (MV) 5×5 mm package with an exposed pad. It operates at up to 32 MHz internal clock and is qualified for the extended -40 °C to +125 °C industrial temperature range, making it suitable for harsh-environment designs. An 8-bit microcontroller (MCU) is a compact, single-chip computer built around an 8-bit data path that integrates CPU, non-volatile program memory, working RAM, EEPROM data storage, and a rich set of peripherals including ADC, DAC, comparators, PWM, communications, and timers. Within the broader semiconductor hierarchy, the PIC16LF18876 belongs to microcontrollers → 8-bit MCUs → embedded controllers → integrated circuits. The "LF" prefix denotes the low-voltage (1.8 V to 3.6 V) variant with Microchip's eXtreme Low Power (XLP) technology, optimized for battery-powered applications. Key features include 36 configurable I/O pins via Peripheral Pin Select (PPS), a 10-bit ADC with computation, a 5-bit/10-bit DAC, multiple comparators with a zero-cross detect (ZCD), Complementary Waveform Generator (CWG), and SMT (Signal Measurement Timer). Communications peripherals include EUSART, SPI, and I²C. Functional safety is supported with CRC/SCAN, HLT (Hardware Limit Timer), and Windowed Watchdog Timer (WWDT). Idle, Doze, and Peripheral Module Disable (PMD) modes enable deep power savings. Architecturally, the device uses an enhanced mid-range 8-bit core with a 14-bit instruction word, priority levels for interrupts, and a hardware multiplier. The 28 KB Flash supports self-programming and ICSP™ (In-Circuit Serial Programming), allowing field firmware updates. This combination of analog, core-independent, and communication peripherals makes the part well suited to mixed-signal designs where the MCU must replace several discrete components. Typical applications include IoT sensor nodes, portable consumer electronics, industrial control nodes, building automation, low-power wireless sensor platforms, and battery-powered HVAC controls. Designers also use the part in functional-safety systems that benefit from WWDT and CRC/SCAN. When designing, ensure the exposed thermal pad is soldered to a sufficient copper pour for thermal dissipation and ground reference. Place the decoupling capacitors as close as possible to VDD/AVDD and VSS/AVSS pins, and follow the recommended oscillator layout when using an external crystal. This page synthesizes distributor pricing, drop-in alternative MPNs, comparison parameters, and practical design notes for engineers evaluating the PIC16LF18876-E/MV for low-power embedded designs.

見積もり お問い合わせ
PIC16LF18876-E/P - 8-Bit 32MHz MCU 28KB Flash 40-PDIP | Microchip
PIC16LF18876-E/P

PIC16LF18876-E/P - 8-Bit 32MHz MCU 28KB Flash 40-PDIP | Microchip

The Microchip Technology PIC16LF18876-E/P is an 8-bit PIC microcontroller from the PIC16(L)F1885X/7X family with XLP (eXtreme Low Power) technology, delivering 32 MHz CPU performance from 28 KB of Flash program memory in a 40-pin PDIP through-hole package. It provides 2 KB RAM, 256 bytes of EEPROM, and an integrated rich analog/digital peripheral set including a 10-bit ADC with Computation (ADC2), a 5-bit/10-bit DAC, comparators, PWM, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), HLT (Hardware Limit Timer), WWDT (Windowed Watchdog Timer), SCAN/CRC, ZCD (Zero-Cross Detect), PPS (Peripheral Pin Select), EUSART, 2x SPI/I2C, and IDLE/DOZE/PMD low-power modes. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM data memory, EEPROM, and configurable peripherals around a Harvard or modified-Harvard architecture. The PIC16F family from Microchip uses a RISC instruction set optimized for deterministic interrupt latency and small code footprint, and the PIC16LF sub-family targets low-voltage (1.8V–3.6V) operation, suitable for battery-powered and energy-harvesting products. The PIC16LF18876-E/P's headline features include its 32 MHz core providing 8 MIPS throughput, 28 KB self-programmable Flash with code protection, and CIPs (Core Independent Peripherals) such as the CWG, SMT, and ZCD that operate autonomously from the CPU, offloading timing-critical tasks and enabling low active CPU duty cycles for XLP operation. The PPS module allows on-the-fly remapping of digital peripheral pins, simplifying PCB layout when peripherals need to be repositioned. ADC2 adds averaging, filtering, and threshold compare functions to the ADC, useful for sensor conditioning without CPU intervention. Architecturally, the device uses a 14-bit instruction word with a hardware stack of 16 levels, an internal 32 MHz oscillator (HFINTOSC) with PLL, and supports an external clock up to 32 MHz. The XLP feature set adds deep sleep, ultra-low-power wake sources (WWDT, RTC, IOC), and voltage regulator low-power modes, enabling typical sleep currents in the sub-microamp range and active currents near 100 µA/MHz. Typical applications for the PIC16LF18876-E/P include industrial sensor conditioning nodes, battery-powered IoT endpoints with measurement duties, home-automation controllers, low-power motor control using the CWG and PWM, smart metering, lighting controls, and portable medical accessories where the 40-pin PDIP footprint simplifies hand-prototyping and field-rework. The 40-pin count exposes up to 36 I/O lines, ample for multi-sensor hubs. When designing with the PIC16LF18876-E/P, ensure the chosen XLP peripheral wake sources match the application duty cycle - for example, RTC-tick wake versus WWDT-periodic wake. Place decoupling capacitors (100 nF and 1 µF) adjacent to every VDD/VSS pair, and verify the MCLR pull-up when using low-voltage programming mode. This page synthesizes Microchip XLP-family parametric data, distributor pricing as of 2026-09-24, drop-in compatible same-package PIC16 alternatives, and practical low-power design notes that are not collated in a single datasheet reference.

見積もり お問い合わせ
PIC16LF18876-E/PT - 32MHz 8-bit XLP MCU, 28KB Flash, 44-TQFP | Microchip
PIC16LF18876-E/PT

PIC16LF18876-E/PT - 32MHz 8-bit XLP MCU, 28KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC16LF18876-E/PT is a low-power 8-bit PIC16 microcontroller from the PIC16(L)F1885X/7X family, featuring 28KB (16K x 14) of Flash program memory, 2KB of RAM, and 256 bytes of EEPROM, all integrated into a 44-pin TQFP (10x10 mm) package. It operates from a 1.8V to 3.6V supply, runs at up to 32 MHz internal clock, and integrates eXtreme Low Power (XLP) technology for battery-friendly designs. What is an 8-bit PIC microcontroller? An 8-bit PIC microcontroller is a compact, RISC-based programmable system-on-chip that integrates a CPU, non-volatile Flash memory, RAM, EEPROM, and a rich set of peripherals (ADC, timers, communication, comparators, PWM) into a single IC. PIC MCUs sit within the broader hierarchy of microcontrollers -> embedded controllers -> semiconductors, and are widely used in cost-sensitive, low-power, and real-time control applications. Key features include a 10-bit ADC with Computation (ADC2), a 5-bit/8-bit DAC, configurable Complementary Waveform Generator (CWG), multiple PWM channels, comparators, zero-crossing detect (ZCD), and Peripheral Pin Select (PPS) for flexible signal routing. Communication peripherals cover EUSART, SPI, and I2C. The integrated 32 MHz internal oscillator eliminates the need for an external crystal in many designs, and core-independent peripherals (CIPs) such as CWG, NCO, and CRC/SCAN offload tasks from the CPU. Typical applications include consumer electronics, IoT sensor nodes, low-power handheld devices, battery chargers, LED lighting controllers, small appliance controls, and industrial sensor interface boards. Its combination of XLP sleep currents and rich analog/digital peripherals makes it well-suited for always-on, energy-harvesting designs. When designing with this part, consider decoupling: place a 0.1uF ceramic capacitor close to each VDD pin and a bulk 10uF on the main rail. Unused pins should be configured as outputs low to minimize leakage. PPS allows most digital peripherals to be remapped to almost any I/O, easing PCB layout. The -E suffix denotes the -40C to +125C extended industrial temperature grade. This page synthesizes Microchip datasheet information, distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF18876-I/ML - 8-Bit 32MHz XLP MCU 28KB Flash 44-QFN | Microchip
PIC16LF18876-I/ML

PIC16LF18876-I/ML - 8-Bit 32MHz XLP MCU 28KB Flash 44-QFN | Microchip

The Microchip Technology PIC16LF18876-I/ML is an 8-bit PIC microcontroller from the PIC16(L)F1885X/7X family, featuring 28KB (16K x 14) of Flash program memory, 2KB of RAM, and 256 bytes of EEPROM. It operates at speeds up to 32MHz with a 16 MIPS instruction rate and is housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The "LF" prefix denotes the extended low-voltage variant of the family, supporting 1.8V to 3.6V operation with Microchip's eXtreme Low Power (XLP) technology. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADCs, timers, communication interfaces) onto one IC. Within the broader taxonomy, an MCU falls under microcontrollers -> integrated circuits -> semiconductors. PIC microcontrollers from Microchip use a modified Harvard RISC architecture with a 14-bit instruction word; the PIC16F18876 specifically targets general-purpose low-power embedded applications where small footprint, low active and sleep current, and on-chip analog peripherals reduce external component count and BOM cost. Key features of the PIC16LF18876 include a 10-bit ADC with up to 43 channels, a 5-bit DAC, multiple comparators, Complementary Waveform Generator (CWG), Capture/Compare/PWM (CCP) modules, Zero-Cross Detect (ZCD), and Peripheral Pin Select (PPS) for flexible signal routing. Communication peripherals include EUSART and two SPI/I2C interfaces. Core-independent peripherals such as CRC/SCAN, Hardware Limit Timer (HLT), and Windowed Watchdog Timer (WWDT) offload tasks from the CPU, enabling low-power standby operation. The XLP technology achieves nanoWatt sleep currents suitable for battery-powered applications. The PIC16LF18876 uses a 14-bit modified Harvard RISC architecture with a hardware stack for fast interrupt response. PPS allows remapping of digital peripheral inputs and outputs to most I/O pins, simplifying PCB layout and enabling late-stage pin assignment changes. The device supports in-circuit serial programming (ICSP) and debugging via standard Microchip tools (PICkit, ICD), reducing development time and supporting field firmware updates. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, battery-operated industrial sensors, consumer remote controls, portable medical monitoring accessories, smart home devices, and general-purpose embedded control where extended battery life is required. The wide peripheral integration often eliminates the need for companion analog or logic chips. Design consideration: when migrating firmware from older PIC16F1xxx devices, verify register definitions against the PIC16F18876 header file because PPS remapping must be configured during initialization. Place a 0.1uF decoupling capacitor as close as possible to each VDD pin and connect the QFN exposed pad (EP) to a solid ground plane for thermal dissipation. This page synthesizes verified distributor pricing, parametrically validated drop-in alternatives, and practical design notes not collected on any single manufacturer or distributor product page.

見積もり お問い合わせ
PIC16LF18876-I/MV - 32MHz 8-bit MCU, 28KB Flash | Microchip
PIC16LF18876-I/MV

PIC16LF18876-I/MV - 32MHz 8-bit MCU, 28KB Flash | Microchip

The Microchip Technology PIC16LF18876-I/MV is an 8-bit RISC microcontroller from the PIC16(L)F1885X/7X family, featuring a 32MHz CPU core, 28KB (16K x 14 words) of Flash program memory, and 2KB of RAM, housed in a 40-pin UQFN (5x5 mm) exposed-pad package. It is the low-power (LF) variant of the PIC16F18876, designed for general-purpose and battery-powered applications across industrial and consumer markets. An 8-bit microcontroller (MCU) is a small, self-contained computing device that integrates a CPU, non-volatile program memory, volatile data memory, and a mix of analog and digital peripherals onto a single silicon die. In the broader electronics taxonomy it sits under microcontroller -> embedded processor -> semiconductor device. The PIC16 family uses a modified Harvard RISC architecture with a 14-bit instruction word, and the 'LF' suffix denotes the extended low-voltage operating range (1.8V to 3.6V) that complements the standard PIC16F parts (which run up to 5.5V). The '18876' family is positioned in the upper-mid tier of the PIC16 line, integrating rich analog and Core Independent Peripherals (CIPs) so that many tasks - timing, signal conditioning, communications - run without waking the CPU. Key features of this part include a 10-bit ADC with computation, up to 36 I/O pins, support for up to 32MHz internal oscillator operation, integrated Core Independent Peripherals such as CRC/SCAN and HLT (Hardware Limit Timer), and eXtreme Low Power (XLP) technology with deep-sleep currents in the nanoampere range. The on-chip peripherals - including multiple UART, SPI, I2C, PWM, comparators, and op-amps - allow designers to assemble a complete sensor or motor-control node with few external components. Architecturally the device pairs an 8-bit accumulator-based ALU with a 14-bit instruction set, deterministic interrupt latency, and a configurable oscillator block that supports external crystals, internal HF/LF oscillators, and a 32kHz low-power crystal mode. The 28KB Flash and 2KB RAM are sized for typical mid-tier embedded firmware stacks - sensor fusion, protocol bridges, and small RTOS workloads - and the in-circuit debugger (ICD) interface enables field firmware updates. Typical applications include industrial sensor nodes, low-power IoT edge devices, battery-powered instrumentation, home appliance control boards, and automotive interior subsystems. Its 36 I/O count and analog-rich peripherals also make it suitable for small motor-control loops, multi-channel LED drivers, and capacitive-touch user interfaces. When designing with the PIC16LF18876-I/MV, observe the 1.8V to 3.6V supply window for LF parts (going above 3.6V will damage the part - if a 5V rail is required, select the PIC16F18876 instead), place the exposed pad (EP) on a continuous ground plane for thermal relief, and reserve the ICSPCLK/ICSPDAT pins for in-circuit programming access. Plan the I/O map against the 36 available pins early in the schematic phase. This page synthesizes distributor pricing, drop-in PIC16 family alternatives, and practical PCB design guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF18876-I/PT - 8-bit 32MHz 28KB Flash MCU 44-TQFP | Microchip
PIC16LF18876-I/PT

PIC16LF18876-I/PT - 8-bit 32MHz 28KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC16LF18876-I/PT is an 8-bit PIC RISC microcontroller from the PIC16(L)F1885X/7X family featuring eXtreme Low Power (XLP) technology, a 32 MHz CPU, 28 KB (16K x 14) of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM, all housed in a 44-pin TQFP (10x10 mm) package rated for industrial temperature operation. Core independent peripherals include a 10-bit ADC with computation, a 5-bit DAC, comparators, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI, and I2C, enabling flexible analog and digital signal conditioning without CPU intervention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a configurable set of peripheral interfaces such as ADC, timers, communication ports, and GPIO. Within the semiconductor taxonomy, an MCU sits beneath microcontrollers and above general-purpose digital logic, combining deterministic real-time control with low power consumption and small package footprints, making it the canonical building block for embedded systems. Key features include the XLP nanoWatt XLP sleep modes that drive quiescent current below typical battery-monitoring thresholds, a peripheral pin select (PPS) module that remaps digital peripherals onto almost any I/O pin to ease PCB routing, and an active clock tuning mechanism that calibrates the internal oscillator against a more accurate reference. The device supports a wide 1.8V to 3.6V supply range and is targeted at industrial-grade applications requiring extended temperature tolerance. The CPU uses a Harvard architecture with a 14-bit instruction word and a hardware multiplier, which together with the 32 MHz internal oscillator (8 MHz with 4x PLL) deliver approximately 8 MIPS throughput. The 28 KB Flash self-programming model supports In-Circuit Serial Programming (ICSP) and runtime firmware updates via the bootloader-friendly memory mapping scheme. Typical applications include industrial sensor transmitters, low-power IoT edge nodes, home appliance control boards, and battery-powered metering devices. The combination of XLP sleep currents and a 10-bit ADC allows unattended sensor nodes to run for years on a single cell when duty-cycled correctly. When designing with this device, ensure the ICSP pins (PGx, MCLR) are brought out to a debug header, and select a decoupling network of one 100 nF plus one 10 uF ceramic capacitor placed within a few millimetres of the VDD pins to keep the internal regulator stable across load steps. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power design notes not found in the manufacturer datasheet alone, giving a 360-degree view for component selection and BOM risk assessment.

見積もり お問い合わせ
PIC16LF18876T-I/PT - 8-bit 32MHz 28KB Flash XLP MCU TQFP-44 | Microchip
PIC16LF18876T-I/PT

PIC16LF18876T-I/PT - 8-bit 32MHz 28KB Flash XLP MCU TQFP-44 | Microchip

The Microchip Technology PIC16LF18876T-I/PT is an 8-bit PIC16 microcontroller from the PIC16F188xx family with 28KB (16K x 14 words) of Flash program memory, packaged in a 44-pin TQFP (10x10 mm) and qualified for the industrial -40C to +85C temperature range. It runs at up to 32 MHz from a 1.8V to 3.6V supply, integrates 2 KB of SRAM and 256 bytes of EEPROM, and belongs to the eXtreme Low Power (XLP) family that targets battery-friendly applications with active current in the microamp range. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory and a configurable set of peripherals. The PIC16LF18876 family sits inside Microchip's PIC16 mid-range 8-bit MCU portfolio, above baseline PIC10/PIC12/PIC16F devices but below the dsPIC and PIC32 16/32-bit families. Within the power-management hierarchy the PIC16LF18876 is classified as a power-management IC-adjacent device in the sense that it features nanoWatt XLP sleep modes, peripheral module disable, and a core-independent peripheral set that lets the chip spend most of its time in deep sleep and wake on a single timer, ADC, or interrupt edge without waking the CPU. The device integrates a 10-bit ADC with Computation (ADC2), a 5-bit DAC, multiple comparators, PWM, Complementary Waveform Generator (CWG), SMT timers, Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), SCAN/CRC, Zero-Cross Detect (ZCD), and Peripheral Pin Select (PPS) for flexible routing of digital functions to nearly any I/O. It supports up to 36 general-purpose I/O pins in the 44-pin package, plus multiple serial interfaces (UART, SPI, I2C) for host or sensor connectivity. In the architecture, an 8-bit modified Harvard RISC engine executes most instructions in one cycle, with a 14-bit instruction word and 16-level hardware stack. The 10-bit ADC2 can automate averaging, oversampling, threshold comparisons and burst averaging, offloading signal-conditioning work from the CPU and enabling longer sleep windows. PPS allows remapping of digital peripherals to different physical pins, which simplifies PCB layout and lets the same silicon serve different board variants. Typical applications include low-power IoT sensor nodes, battery-powered HVAC and metering peripherals, automotive body and accessory subsystems (sub-block, not AEC-Q100 in the -I grade), industrial control panels with capacitive touch via mTouch, and consumer appliances requiring long battery life. The 32 MHz core is fast enough for basic communication stacks, while the XLP sleep currents below 50 nA (typical) make it a fit for energy-harvesting or coin-cell products. When designing with this part, select an external 32.768 kHz crystal for RTC-driven sleep, or use the internal 31 kHz LFINTOSC if accuracy below ~1% is acceptable. Decouple VDD with a 100 nF ceramic placed within 2 mm of each VDD pin, plus a bulk 1-10 uF near the regulator output. For EEPROM endurance beyond 100K write cycles, spread writes across multiple pages and verify after each write. This page synthesizes live distributor pricing from DigiKey, Mouser and Octopart, lists drop-in same-package variants from the PIC16LF18876 family, and adds practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18877-E/P - 8-Bit 32MHz 56KB Flash XLP MCU | Microchip
PIC16LF18877-E/P

PIC16LF18877-E/P - 8-Bit 32MHz 56KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF18877-E/P is an 8-bit PIC microcontroller from the PIC16F18877 family, featuring 56KB (32K x 14 words) of Flash program memory, 32MHz internal CPU clock, and housed in a 40-pin PDIP through-hole package. It belongs to Microchip's eXtreme Low Power (XLP) family and operates across a wide voltage range suitable for battery-powered and energy-harvesting applications. The part ships with 256 bytes of EEPROM, hardware peripherals including a 10-bit ADC with computation (ADC2), EUSART, two SPI/I2C modules, and Peripheral Pin Select (PPS) for flexible signal routing. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals onto one silicon die. The PIC16F18877 sits in the broader hierarchy: PIC16 (mid-range 8-bit core) -> PIC microcontroller family -> 8-bit microcontroller -> microcontroller -> embedded processing IC -> semiconductor. Compared with 32-bit Cortex-M parts, 8-bit PIC MCUs trade raw throughput for ultra-low sleep current, deterministic interrupt latency, and decades of code/toolchain maturity. Key features include the CIP (Core Independent Peripheral) set: hardware CRC/SCAN, Zero-Cross Detect, Hardware Limit Timer, Complementary Waveform Generator with dead-band control, and configurable logic cells. The device delivers typical sleep currents below 50 nA with RTC running, and active currents around 1.6 mA at 4 MHz. PPS lets designers remap digital peripherals to almost any I/O pin, simplifying PCB layout. The PIC16F18877 is built on an enhanced mid-range 8-bit RISC architecture with a 14-bit instruction word, hardware multiplier, and 32 interrupt sources. It supports In-Circuit Serial Programming (ICSP) via two pins, allowing firmware updates after PCB assembly without bootloader overhead. Typical applications include IoT sensor nodes, low-power wireless-connected devices (using EUSART/SPI to a transceiver), home appliances, battery-powered instrumentation, LED lighting control, and small motor/HVAC control loops. The wide operating voltage and ultra-low sleep current suit coin-cell or energy-harvested designs. When designing, evaluate whether the 40-pin PDIP is essential for through-hole prototyping - the same die ships in 28/44-pin QFN variants for reflow production. Always include proper decoupling (100 nF + bulk) within 5 mm of VDD pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet and help engineers select the right variant faster.

見積もり お問い合わせ
PIC16LF18877-I/MV - 32MHz 8-Bit XLP MCU 56KB Flash | Microchip
PIC16LF18877-I/MV

PIC16LF18877-I/MV - 32MHz 8-Bit XLP MCU 56KB Flash | Microchip

The Microchip Technology PIC16LF18877-I/MV is an 8-bit PIC® XLP™ 16F microcontroller featuring a 32 MHz CPU, 56 KB (32K x 14 words) of Flash program memory, 256 B of EEPROM data memory, and a 10-bit ADC2 peripheral, packaged in a 40-pin UQFN (MV) 5x5 mm with exposed pad. It belongs to the PIC16(L)F1885X/7X family and combines Core Independent Peripherals, the eXtreme Low Power (XLP) technology, plus flexible communication peripherals such as EUSART, SPI, and I2C for general-purpose and low-power embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, data RAM, and peripheral interfaces in one package. The 'PIC' architecture uses a Harvard design with separate program and data buses, optimizing instruction fetch and data access in parallel. 8-bit MCUs dominate cost- and power-sensitive applications such as consumer appliances, sensor nodes, and human-interface devices where 32-bit performance is not required. The PIC16(L)F18877 sits in Microchip's mid-range XLP portfolio, positioned between baseline 8-bit parts and higher-pin-count 16-bit dsPIC devices. Key features of the PIC16LF18877 include the 32 MHz internal oscillator with 4x PLL option, 10-bit ADC2 with computation, peripheral pin select (PPS) for flexible signal routing, and Core Independent Peripherals such as the CRC/SCAN, HLT (Hardware Limit Timer), and CWG (Complementary Waveform Generator). The 'LF' prefix denotes the F (low-voltage, low-power) variant supporting 1.8 V to 3.6 V operation; the 'F' non-LF variant extends up to 5.5 V. The 256 B EEPROM and the 10-bit ADC2 with internal voltage reference are especially useful for sensor calibration data and battery monitoring. The PIC16LF18877 is qualified for industrial-grade operation (-40C to +85C for the 'I' suffix) and supports JTAG/ICSP in-circuit programming plus debug. PPS allows digital peripherals to be remapped to almost any I/O pin, simplifying PCB routing and enabling late-stage design changes. Compared with earlier PIC16F1X devices, the 18877 family adds the ADC2 with hardware accumulation and the CWG, which is useful for motor control and power-converter gating. Typical applications include low-power IoT sensor nodes, battery-powered wearables, consumer white goods, HVAC control panels, motor control signal conditioning, and industrial sensor hubs. The 32 MHz MIPS throughput and PPS flexibility allow a single MCU to serve as both sensor interface and communications gateway. Design consideration: the UQFN-40 (5x5) package has a center exposed thermal pad that MUST be soldered to a ground copper pour for mechanical reliability and thermal dissipation. Decoupling capacitors (100 nF + 1 uF) should be placed within 3 mm of each VDD pin. Programming pins (ICSPCLK/ICSPDAT) must be accessible for production flashing. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF18877-I/P - 8-bit 32MHz 56KB Flash XLP MCU | Microchip
PIC16LF18877-I/P

PIC16LF18877-I/P - 8-bit 32MHz 56KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF18877-I/P is an 8-bit PIC microcontroller built on the eXtreme Low Power (XLP) architecture, delivering 32 MHz CPU performance with 56 KB of Flash program memory (32K x 14 words), 4 KB of RAM, and 256 bytes of EEPROM in a 40-pin PDIP through-hole package. The 'LF' prefix denotes the wide-voltage 1.8V-3.6V operating range, ideal for battery-powered and energy-harvesting designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash), EEPROM data memory, and a rich set of peripherals around an 8-bit data bus. PIC microcontrollers sit in the broader hierarchy of microcontrollers -> embedded processors -> semiconductor ICs, and within the 8-bit class they are recognized for deterministic instruction execution, low power consumption, and a long-lived, well-supported toolchain (MPLAB X IDE, XC8 compiler). Key features include a 10-bit ADC with Computation (ADC2), two DACs, comparators, Capture/Compare/PWM, the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), Peripheral Pin Select (PPS), and communication peripherals including EUSART, two SPI/I2C blocks, and the CRC/SCAN hardware block for functional safety. The device is supported by the PIC16(L)F1885X/7X family feature set, which adds Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), and Sleep/Idle/Doze power-management modes. The architecture combines the enhanced mid-range 16-bit instruction word with the nanoWatt XLP technology for sleep currents in the nanoamp range, allowing direct battery connection for years of operation. Built-in Core Independent Peripherals (CIPs) such as CLC and CWG offload tasks from the CPU and continue running in sleep, enabling event-driven firmware that wakes only on real stimuli. Typical applications include low-power IoT sensor nodes, battery-powered home automation, industrial control, functional-safety sensor interfaces, and consumer white goods. The 40-pin PDIP package also makes this part well suited to hobbyist prototyping, educational labs, and through-hole production runs. When designing with this MCU, allocate the PPS I/O map early so that conflicting peripheral pin assignments are resolved before PCB layout. Place a 0.1 uF decoupling capacitor within 5 mm of every VDD/VSS pair, and use the WWDT and CRC/SCAN blocks to meet functional-safety requirements for IEC 61508 SIL-2 designs. This page synthesizes distributor pricing, drop-in 40-PDIP alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ