集積回路

サブカテゴリ

📁 ADC/DAC 2,700+ 製品 📁 アンプIC 1,100+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 470+ 製品 📁 DSP 1,000+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6,800+ 製品 📁 インターフェースIC 2,200+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 360+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 19,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (35,000+)

PIC16LF19156T-I/SO - 28KB Flash XLP LCD MCU | Microchip
PIC16LF19156T-I/SO

PIC16LF19156T-I/SO - 28KB Flash XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19156T-I/SO is an 8-bit PIC16 microcontroller with 28KB Flash, 2KB RAM, and 256 bytes of EEPROM, housed in a 28-pin SOIC package and rated for industrial -40C to +85C operation. It belongs to the PIC16F191xx family and integrates an LCD driver, 12-bit ADC2, 5-bit/8-bit DAC, low-power comparator, CCP, PWM, CWG, SMT, ZCD, PPS, and RTCC peripherals, targeting low-power battery applications. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates a CPU, program memory, RAM, and peripherals on a single die. Within the broader taxonomy, the PIC16LF19156 sits in the PIC16 family -> 8-bit PIC microcontroller -> microcontroller -> semiconductor. Its "LF" prefix denotes the eXtreme Low-Power (XLP) variant optimized for battery and energy-harvesting applications, while the F (Flash) suffix indicates in-circuit re-programmable Flash program memory. Key features include 32 MHz operation from a 1.8V to 3.6V supply, the XLP sleep mode with nanoWatt technology, 36 digital I/O pins, integrated LCD charge pump for bias generation, and direct memory access. The 28-pin SOIC (SO) footprint is the same as the original PIC16F19xx baseline, providing a migration path for engineers already designing with that package. Typical applications include battery-powered LCD thermostats, IoT sensor nodes with display readouts, wearable medical monitors, industrial human-machine interface (HMI) panels, and metering products. The 256-byte EEPROM supports persistent settings storage across power cycles, while the integrated RTCC simplifies real-time clock implementations in metering and scheduling products. When designing with this device, place a 100 nF decoupling capacitor adjacent to each VDD pin and a bulk 1uF-10uF tantalum or ceramic cap on the main supply rail. The LCD charge pump output capacitors should be rated for the maximum segment load and follow the manufacturer reference layout from TB3131 and the PIC16F19156 datasheet. For migration from PIC16LF19155 (56KB/32KB), check that your program code fits within 28KB Flash. This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip's PIC16 family, and practical design notes not found in the manufacturer datasheet summary, all verified as of 2026-09-25.

見積もり お問い合わせ
PIC16LF19175-E/PT - 8-Bit 32MHz XLP MCU 14KB Flash | Microchip
PIC16LF19175-E/PT

PIC16LF19175-E/PT - 8-Bit 32MHz XLP MCU 14KB Flash | Microchip

The Microchip Technology PIC16LF19175-E/PT is a low-power 8-bit PIC16 microcontroller built on the enhanced mid-range core, running up to 32 MHz with 14 KB (8K x 14 words) of Flash program memory and operating from a 1.8 V to 3.6 V supply. Housed in a 44-pin TQFP (10x10 mm) package, the LF variant is qualified for the lower-voltage XLP (eXtreme Low-Power) regime that suits coin-cell and Li-Ion battery products. A PIC microcontroller is a compact, deterministic microcontroller that integrates a CPU, non-volatile program memory, RAM, EEPROM and a rich peripheral set on a single die. The PIC16F191xx family sits in Microchip's 8-bit XLP portfolio between the PIC16F1 mid-range and the PIC18 baseline, adding on-chip LCD drive, Core Independent Peripherals (CIPs) and Intelligent Analog to reduce external component count and to keep average current in the nanoampere range during sleep. Key features of the PIC16LF19175 include 1 KB RAM, 256 bytes EEPROM, hardware CRC/SCAN, a Windowed Watchdog Timer (WWDT), Hardware Limit Timer (HLT), a Real-Time Clock Calendar (RTCC) and Peripheral Module Disable (PMD). The integrated 12-bit ADC2 with computation, 5-bit DAC, zero-cross detect (ZCD) and low-power comparator (LP COMP) provide sensor-friendly analog front-ends, while CCP, PWM and the Configurable Logic Cell (CLC) simplify power-converter and signal-conditioning tasks. The 8-bit product family. The PIC16LF19175 uses an enhanced Harvard RISC architecture with 49 instructions and a hardware multiply, delivering roughly 8 MIPS at 32 MHz while retaining the small code footprint typical of PIC cores. On-chip LCD drive supports up to 96 segments with an internal charge pump, and the device can wake from sleep on an interrupt in microseconds, making it suited to ultra-low-duty-cycle designs. Typical applications include battery-powered LCD thermostats and metering, IoT sensor nodes, wearable health and fitness devices, remote controls, electronic shelf labels, smoke and CO detectors, low-cost medical instruments, and any general-purpose embedded control loop that demands long battery life and on-display feedback. When designing with this part, budget derating carefully: at 32 MHz and 3.3 V the core draws about 4 mA, while deep sleep with RTCC retains timekeeping below 1 uA. Place a 100 nF decoupling capacitor within 2 mm of VDD and add a 10 uF bulk capacitor on the board supply, and use the ICD header layout described in the datasheet to keep programming reliable.

見積もり お問い合わせ
PIC16LF19175-I/MV - 8-Bit MCU, 32MHz, 14KB Flash, LCD, UQFN-40
PIC16LF19175-I/MV

PIC16LF19175-I/MV - 8-Bit MCU, 32MHz, 14KB Flash, LCD, UQFN-40

The Microchip Technology PIC16LF19175-I/MV is an 8-bit PIC microcontroller from the PIC16F191xx family operating at up to 32 MHz, integrating 14 KB (8K x 14 words) of Flash program memory, 1 KB of SRAM, and 256 bytes of EEPROM in a 40-pin UQFN (5x5 mm) package with exposed pad. It is part of the eXtreme Low-Power (XLP) family and combines Intelligent Analog, Core Independent Peripherals (CIPs), and an integrated LCD driver with charge pump, making it especially suited to battery-powered LCD applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and programmable I/O peripherals on a single silicon die. The PIC16F191xx family sits within Microchip's 8-bit PIC16 hierarchy, which traces up to the broader category of microcontrollers -> embedded processors -> semiconductors. The 'LF' prefix designates the 1.8 V to 3.6 V low-voltage variant, optimized for coin-cell and lithium battery operation, while the non-'LF' PIC16F19175 operates from 2.3 V to 5.5 V. Key features include a 12-bit ADC2 with computation, a 5-bit/10-bit DAC, two comparators with rail-to-rail inputs, a zero-cross detect (ZCD), a complementary waveform generator (CWG), four 16-bit PWM timers, capture/compare/PWM (CCP), signal measurement timer (SMT), peripheral pin select (PPS), real-time clock/calendar (RTCC), and an LCD driver supporting up to 248 segments with integrated charge pump. The device also includes CRC/SCAN, Hardware Limit Timer (HLT), and Windowed Watchdog Timer (WWDT) for functional safety, and offers 35 user I/O pins on this 40-pin package variant. Architecturally, the PIC16LF19175 uses a RISC-based PIC16 core with a hardware stack and 14-bit instruction word, paired with a 32 MHz internal oscillator that removes the need for an external crystal in most designs. Core Independent Peripherals operate without CPU intervention, freeing the core for low-power sleep states and reducing average current draw - critical for battery-operated human-machine interfaces and metering products. Typical applications include battery-powered LCD keypads, IoT sensor nodes with displays, home automation control panels, medical glucose meters and portable monitors, and industrial HMI tiles. The wide operating voltage range (1.8 V to 3.6 V) and integrated charge-pump LCD driver eliminate the need for a boost converter on the display bias rail, reducing BOM cost and PCB area. When designing with this device, plan the I/O pinout against the UQFN-40 land pattern early - the 5x5 mm package with exposed pad requires a continuous ground plane beneath the die for thermal dissipation and electrical reference. Use the PPS feature to remap peripherals to available physical pins and avoid routing conflicts late in the design. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19175-I/PT - 14KB Flash, 32MHz XLP LCD MCU | Microchip
PIC16LF19175-I/PT

PIC16LF19175-I/PT - 14KB Flash, 32MHz XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19175-I/PT is an 8-bit PIC16F microcontroller featuring eXtreme Low-Power (XLP) technology, 14KB Flash program memory, 1KB RAM, and 256B EEPROM, housed in a 44-pin TQFP (10x10mm) package. Operating from 1.8V to 3.6V with a 32MHz internal oscillator, it integrates intelligent analog peripherals including a 12-bit ADC2, 5-bit DAC, low-power comparator, and Zero-Cross Detect (ZCD) for energy-efficient signal acquisition. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O. An 8-bit PIC16 microcontroller uses a modified Harvard RISC architecture optimized for deterministic interrupt latency and ultra-low-power operation. Within the broader taxonomy, the PIC16LF19175 sits at the bottom of the microcontroller hierarchy: MCU -> 8-bit MCU -> PIC16F family -> PIC16LF191xx sub-family. The "LF" prefix denotes the low-voltage (1.8V-3.6V) variant targeting battery-powered applications, while the "191" series integrates LCD drive and Core Independent Peripherals (CIPs) that offload tasks from the CPU. Key features include four Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Signal Measurement Timer (SMT), PWM, CCP capture/compare modules, and Peripheral Pin Select (PPS) for flexible I/O mapping. The integrated LCD driver supports up to 96 segments with a charge pump for contrast biasing in low-voltage designs. Real-Time Clock Calendar (RTCC) with hardware compensation provides accurate timekeeping during sleep, drawing microamp-level current. The device retains all 35 I/O pins even with LCD active, supporting mixed analog/digital sensor interfaces. Typical applications span battery-powered consumer devices with LCD displays, IoT sensor nodes, medical dosing pumps, industrial HMI panels, metering equipment, and ePaper/e-ink controllers. The XLP sleep current below 50 nA with RTCC running enables multi-year battery life in always-on installations. The 12-bit ADC2 with hardware averaging accelerates precision sensor reading while the CPU sleeps. When designing with this part, use PPS to reassign peripheral functions to any I/O pin, simplifying PCB layout. Verify the TQFP-44 land pattern matches your footprint before ordering, as the "PT" suffix is critical for the 10x10mm body size. For higher temperature range requirements, evaluate the -E/PT (extended) or -MV package variants instead. This page synthesizes distributor pricing, drop-in Microchip equivalents, and practical design notes not found in the manufacturer datasheet alone. All data is verified against DigiKey, Mouser, and Octopart listings as of 2026-09-25.

見積もり お問い合わせ
PIC16LF19175T-I/MV - 14KB Flash, 32MHz 8-bit XLP MCU | Microchip
PIC16LF19175T-I/MV

PIC16LF19175T-I/MV - 14KB Flash, 32MHz 8-bit XLP MCU | Microchip

The Microchip Technology PIC16LF19175T-I/MV is an 8-bit PIC® XLP™ 16F microcontroller with 14KB Flash, 1KB RAM, and 256 bytes of EEPROM, operating up to 32MHz in a 40-pin UQFN (5x5 mm) package with exposed pad. The "LF" prefix denotes the wide-voltage low-power variant, supporting 1.8V to 3.6V operation ideal for battery-powered systems. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die; the PIC16 core uses a modified Harvard RISC architecture with 14-bit instruction words optimized for deterministic execution and low power consumption. XLP (eXtreme Low Power) technology from Microchip adds sleep currents in the nanoampere range, making this family especially suited for energy-harvesting and battery-backed applications. Key features include an integrated LCD driver with charge pump, 12-bit ADC2 with Computation, 5-bit and 8-bit DACs, low-power comparator, PWM, CCP, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), ZCD (Zero-Cross Detect), PPS (Peripheral Pin Select), and RTCC (Real-Time Clock Calendar). The device provides Core Independent Peripherals (CIPs) that operate without CPU intervention, freeing the core for higher-level tasks. Hardware security is enhanced with CRC/SCAN, a Hardware Limit Timer (HLT), and a Windowed Watchdog Timer (WWDT). The 40-pin UQFN (MV) package offers a compact 5x5 mm footprint suitable for space-constrained designs while maintaining full peripheral access through the device's 36 I/O pins. Typical applications include battery-powered LCD user interfaces, IoT sensor nodes, home automation panels, medical monitoring devices, and industrial control HMIs. The integrated charge pump allows direct LCD glass drive without external boost circuitry. When designing with this MCU, place a 0.1 µF decoupling capacitor as close as possible to the VDD pin and a 10 µF bulk capacitor near the UQFN exposed pad, which must be soldered to a ground plane for thermal dissipation. PPS enables flexible pin assignments but requires configuration lock-out to prevent runaway code. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet cover page. All information was verified against the Microchip PIC16LF19175 datasheet and DigiKey listings as of 2026-09-25.

見積もり お問い合わせ
PIC16LF19175T-I/PT - 8-bit 32MHz 14KB Flash MCU | Microchip
PIC16LF19175T-I/PT

PIC16LF19175T-I/PT - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip PIC16LF19175T-I/PT is a low-power 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family, featuring 14KB (8K x 14) of Flash program memory, 1KB of SRAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It operates at up to 32 MHz from a 1.8V to 3.6V supply, with nanoWatt XLP technology for ultra-low-power battery applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile storage (EEPROM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and I/O ports. Within the broader taxonomy, the PIC16LF19175 belongs to the 8-bit MCU category, which sits under microcontrollers, then embedded processors, and finally semiconductors. Its nanoWatt XLP pedigree makes it a representative member of the ultra-low-power MCU class used in energy-harvesting and battery-powered designs. Key features include an integrated LCD driver with charge pump, a 12-bit ADC2 with computation, a 5-bit DAC, low-power comparators (LP COMP), PWM, CCP, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), ZCD (Zero-Cross Detect), PPS (Peripheral Pin Select), RTCC (Real-Time Clock Calendar), HLT (Hardware Limit Timer), WWDT (Windowed Watchdog Timer), and PMD (Peripheral Module Disable). The combination of PPS and PMD gives system designers granular control over pin routing and unused peripheral power-down to extend battery life. The architecture is built on Microchip's enhanced mid-range PIC16 core, providing deterministic instruction execution at 32 MHz with a 31.25 ns instruction cycle. The internal 32 MHz oscillator, optional 32 kHz low-power oscillator, and PLL flexibility allow trade-offs between active power, sleep current (claimed down to nanoampere class), and timing accuracy. The 12-bit ADC2 with computation automates averaging, filtering, and threshold decisions on-chip, offloading the CPU. Typical applications include battery-powered IoT sensor nodes, thermostat and HVAC control panels with LCD readouts, metering (gas/water/electric), home appliance user interfaces, portable medical devices, and industrial human-machine interface (HMI) terminals. The integrated LCD driver and RTCC make it especially well-suited to mains- or battery-powered clock/display products. When designing, validate the minimum operating voltage for the chosen clock frequency and engage peripheral module disable (PMD) and sleep modes aggressively to achieve the headline nanoWatt XLP figures. For LCD designs, allocate sufficient bias resistor values for the chosen glass and use the charge pump only when VIN is below the LCD threshold voltage. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF19176-E/MV - 28KB Flash 8-bit MCU XLP LCD | Microchip
PIC16LF19176-E/MV

PIC16LF19176-E/MV - 28KB Flash 8-bit MCU XLP LCD | Microchip

The Microchip Technology PIC16LF19176-E/MV is an 8-bit PIC microcontroller built on the eXtreme Low-Power (XLP) architecture, featuring 28KB Flash program memory, 2KB SRAM, and 256 bytes of EEPROM, housed in a 40-pin UQFN (MV) 5x5 mm exposed-pad package. It runs up to 32 MHz from a 1.8V to 3.6V supply, integrates a hardware LCD driver, a 12-bit ADC2 with computation, a 5-bit DAC, and a rich set of Core Independent Peripherals including PWM, CCP, CWG, SMT, ZCD, PPS, RTCC, HLT, WWDT, and PMD. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and I/O peripherals. The PIC16F family belongs to the broader microcontroller hierarchy: PIC16F -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The LF sub-family is the low-power F-variant, optimized for battery-powered applications with nanoWatt XLP sleep modes and an integrated charge pump for LCD glass biasing even at low Vdd. Key features that differentiate this part: 16K x 14 Flash words (28KB), 256 bytes high-endurance EEPROM with EEPROM-on-Flash endurance of 100k cycles typical, and on-chip LCD charge pump supporting up to 64 segments without external bias resistors. The 12-bit ADC2 can perform automated Accumulate, Averaging, Burst Average, Low-Pass Filter, and Threshold Compare operations without CPU intervention, offloading signal conditioning in sensor designs. Architecturally, the device pairs a 14-bit instruction-word PIC16 core with Peripheral Pin Select (PPS) allowing most digital peripherals to be remapped to any I/O, a Configurable Logic Cell (CLC) block, and a Complementary Waveform Generator (CWG) for half-bridge / full-bridge / push-pull drive of MOSFETs. The Sleep current with LCD and RTCC active is in the order of a few microamps - critical for sealed-battery products that must run for years on a coin cell or two AA cells. Typical applications include battery-powered LCD panel meters, IoT sensor nodes with displays, electronic shelf labels (ESL), medical wearables, low-end HMI tiles, and industrial thermostats. The combination of integrated LCD, ADC2, and CWG simplifies BOM and PCB area in any node that needs a display plus sensor readout plus small-motor / buzzer drive. When designing with this part, prioritize firmware that uses Sleep mode aggressively and routes wake-up sources through the MTIO / RTCC / IOC blocks; do not poll in main loop. Enable the LCD charge pump only when the display is visible and disable peripherals individually with PMD to minimize active current.

見積もり お問い合わせ
PIC16LF19176-E/P - 8-bit XLP MCU, 28KB Flash, 40-PDIP | Microchip
PIC16LF19176-E/P

PIC16LF19176-E/P - 8-bit XLP MCU, 28KB Flash, 40-PDIP | Microchip

The Microchip Technology PIC16LF19176-E/P is an 8-bit PIC16 microcontroller featuring 28KB of FLASH program memory, 2KB of RAM, and 256 bytes of EEPROM, housed in a 40-pin PDIP through-hole package. It operates at up to 32MHz clock speed and supports a wide voltage range of 1.8V to 3.6V, with eXtreme Low-Power (XLP) technology for battery-powered applications. The integrated LCD driver with charge pump enables direct glass drive without external boost circuitry, while Core Independent Peripherals (CIPs) such as CWG, SMT, ZCD, and PPS reduce CPU overhead and BOM cost. An 8-bit microcontroller (MCU) is a compact programmable processor that integrates CPU, memory, and peripherals on a single silicon die. The PIC16 family sits within Microchip's 8-bit PIC microcontroller hierarchy, which is part of the broader category of microcontrollers (MCUs) and embedded controllers. PIC MCUs use a modified Harvard RISC architecture with separate program and data buses, allowing single-cycle instruction execution. The 'LF' prefix indicates a low-voltage (1.8V minimum VDD) variant optimized for battery-powered and energy-harvesting designs, distinguishing it from standard 'F' variants that typically require 2.0V or higher. Key features include a 12-bit ADC with computation (ADC2), a 5-bit DAC, a low-power comparator, PWM/CCP/CWG waveform generation, signal measurement timer (SMT), zero-crossing detect (ZCD), peripheral pin select (PPS), and a hardware RTCC with calendar mode. The device also offers windowed watchdog timer (WWDT), peripheral module disable (PMD), and hardware limit timer (HLT) for safety-critical applications. With 36 to 50 I/O pins available in the 40-pin PDIP form factor, designers can interface multiple sensors, displays, and communication peripherals simultaneously. The architecture combines a 14-bit instruction word PIC16 CPU with a vectored interrupt controller and hardware multiplier, achieving 32MHz operation at less than 1.2mA active current and sub-uA sleep currents via nanoWatt XLP technology. The integrated LCD charge pump supports bias generation up to 5V VLCD from a single 1.8V to 3.6V supply, eliminating the need for external boost components in low-power LCD designs. Typical applications include battery-powered glucose meters and thermostats, electronic shelf labels, smart remote controls, and any portable LCD-based product requiring long battery life. The combination of low power, integrated LCD drive, and CIPs makes the PIC16LF19176 family a strong fit for cost-sensitive consumer medical and IoT products. Designers should budget PCB area for the 40-pin PDIP footprint (600 mil body width) and verify the VLCD charge pump output current capability against their LCD segment count and refresh rate requirements.

見積もり お問い合わせ
PIC16LF19176-E/PT - 8-Bit XLP MCU 28KB Flash LCD 44-TQFP | Microchip
PIC16LF19176-E/PT

PIC16LF19176-E/PT - 8-Bit XLP MCU 28KB Flash LCD 44-TQFP | Microchip

The Microchip Technology PIC16LF19176-E/PT is an 8-bit PIC16 microcontroller built on the eXtreme Low-Power (XLP) architecture with a maximum CPU clock of 32 MHz, 28 KB (16K x 14 words) of Flash program memory, and 44-pin TQFP (10x10 mm) surface-mount package. The part combines Core Independent Peripherals (CIPs), Intelligent Analog, integrated LCD drive, and a charge pump for low-power segmented displays, targeting battery-powered general-purpose and human-interface applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals on a single die. Within the power-management hierarchy, MCUs sit at the device-control layer above sensors and below system-level SoCs, providing deterministic real-time control while drawing as little as microamps in sleep mode. The PIC16 family uses a RISC instruction set with 14-bit wide instructions and a Harvard architecture, making it well suited to cost-sensitive embedded designs. Key features of the PIC16LF19176-E/PT include 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, integrated 12-bit ADC2, 5-bit DAC, low-power comparators, PWM/CCP, CWG, SMT, ZCD, PPS, RTCC, hardware limit timer (HLT), windowed watchdog timer (WWDT), and peripheral module disable (PMD). The wide operating voltage range of 1.8 V to 3.6 V and XLP nanoWatt technology enable years of battery life in standby. Typical applications include battery-powered LCD consumer products (thermostats, blood-pressure monitors, e-bike displays), IoT sensor nodes, home-automation keypads/HMI, low-cost industrial control, and metering panels. The integrated LCD charge pump and segment driver reduce BOM cost by eliminating an external voltage booster. Designers should evaluate sleep current (claimed nanoWatt), wake-up latency, and segment-count requirements when choosing this part. The 44-TQFP package offers generous I/O count but should be paired with a clean 3V LDO for analog performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on standard distributor listings.

見積もり お問い合わせ
PIC16LF19176-I/MV - 32MHz XLP 8-Bit MCU, 28KB Flash | Microchip
PIC16LF19176-I/MV

PIC16LF19176-I/MV - 32MHz XLP 8-Bit MCU, 28KB Flash | Microchip

The Microchip Technology PIC16LF19176-I/MV is an 8-bit PIC microcontroller built around the XLP (eXtreme Low-Power) 16F core, running at up to 32 MHz with 28 KB of Flash program memory and 2 KB of SRAM, housed in a 40-pin UQFN (MV) 5x5 mm package. It integrates a 12-bit ADC2 with up to 35 channels, a 5-bit DAC, two comparators (one low-power, one high-speed), two 8-bit timers with Hardware Limit Timer (HLT), two 16-bit timers, two CCP modules, two 10-bit PWM peripherals, one complementary waveform generator, and a Windowed Watchdog Timer (WWDT). What is an 8-bit PIC microcontroller? An 8-bit MCU is a single-chip computer whose ALU, registers, and data bus operate on 8-bit words; it executes one instruction per cycle (or one instruction per two cycles for some PIC variants) with a deterministic RISC pipeline. The PIC16F191xx family adds eXtreme Low-Power (XLP) technology, Core Independent Peripherals (CIPs) that operate without CPU intervention, and intelligent analog to enable low-power general-purpose embedded designs, especially battery-powered products with segment-LCD displays. Key differentiating features of this variant include the integrated LCD charge pump bias generator supporting up to 184 LCD segments, an active clock-tuning HFINTOSC that maintains frequency accuracy over voltage and temperature, and CRC/SCAN hardware for memory integrity checking. A windowed watchdog timer and hardware limit timer add safety features valuable in IEC 60730 class-B firmware for white goods. The MV package code (40-UQFN 5x5 mm) suits space-constrained HMI boards. The LF prefix denotes an extended supply-voltage part designed to operate down to 1.8V typical (versus the F variant's 2.3V typical), making this part optimized for primary-cell or low-voltage Li-ion battery rails. Typical applications include battery-powered segment-LCD thermostats, home-appliance user interfaces, low-power sensor hubs with mTouch capacitive sensing, IoT edge nodes, metering displays, and handheld consumer devices. The -I grade is rated for the industrial temperature range, and the combination of XLP sleep currents below 1 uA and a fast wake-up from sleep with Peripheral Pin Select (PPS) enables years of battery life on a single CR2032 cell in typical duty-cycled applications. When designing with the PIC16LF19176-I/MV, plan for ICD/ICSP header access even in low-pin designs because debug pins are multiplexed; leverage PPS to remap peripherals and ease PCB routing; and account for the 5x5 mm UQFN thermal pad which must be soldered to a sufficient copper pour for production-grade thermal and mechanical reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19176T-I/MV - 28KB Flash 8-bit XLP MCU | Microchip
PIC16LF19176T-I/MV

PIC16LF19176T-I/MV - 28KB Flash 8-bit XLP MCU | Microchip

The Microchip PIC16LF19176T-I/MV is an 8-bit PIC microcontroller from the PIC16F191xx family that delivers 32 MHz CPU performance from 28 KB of Flash program memory, housed in a 40-pin UQFN (MV) 5x5 mm package. It features 2 KB of SRAM, 256 bytes of EEPROM-like data Flash, and an integrated 12-bit ADC2 with DAC, LP comparator, and ZCD peripherals. The LF-prefixed part runs across a wide 1.8 V to 3.6 V supply range and is built on Microchip's eXtreme Low-Power (XLP) technology for battery-powered designs. The 'T' suffix denotes tape-and-reel packaging while the '-I' industrial temperature grade supports -40 C to +85 C operation. A PIC microcontroller is a compact, self-contained computer-on-a-chip that integrates a CPU, non-volatile program memory, RAM, and peripherals such as timers, ADC, communication interfaces, and I/O onto a single silicon die. PIC microcontrollers sit within the broader hierarchy of microcontrollers (MCU) -> microprocessors -> embedded computing devices -> semiconductors, and the PIC16 family specifically targets low-power, mid-complexity applications. The XLP variants add nanoWatt sleep modes and ultra-low standby currents, enabling years of operation from coin-cell or primary batteries. Core Independent Peripherals (CIPs) like the Hardware Limit Timer (HLT) and Windowed Watchdog Timer (WWDT) execute logic without CPU intervention, freeing the core and reducing active power. Key features include integrated LCD drive (up to 96 segments) with on-chip charge pump, four 16-bit timers, four CCP/ECCP plus CWG peripherals, Peripheral Pin Select (PPS) for flexible signal routing, and an RTCC with calendar mode. CRC/SCAN hardware supports non-intrusive memory integrity checks. The device is supported by Microchip's MPLAB X IDE, XC8 compiler, and MCC code configurator, providing a complete firmware development chain from prototype through production. Typical applications include battery-powered LCD consumer products such as thermostats, electronic shelf labels, blood glucose meters, and remote controls. Industrial HMI panels, sensor node data loggers, and metering front-ends also benefit from its rich peripheral set and low sleep current. The integrated 12-bit ADC2 and 5-bit DAC simplify analog signal conditioning in measurement products without requiring external components. When designing with this device, plan the pinout using the Peripheral Pin Select (PPS) feature, which remaps digital peripherals to a wide range of I/O pins. Decouple VDD with a 0.1 uF X7R ceramic placed within 3 mm of the package, and place the VCAP pin capacitor (1 uF to 10 uF) as close as possible to maintain LDO stability. Always configure unused I/O as outputs low to minimize current leakage in sleep mode.

見積もり お問い合わせ
PIC16LF19176T-I/PT - 8-bit XLP MCU, 28KB Flash, 32MHz | Microchip
PIC16LF19176T-I/PT

PIC16LF19176T-I/PT - 8-bit XLP MCU, 28KB Flash, 32MHz | Microchip

The Microchip PIC16LF19176T-I/PT is a low-power 8-bit PIC16 microcontroller built on the enhanced mid-range core, delivering 32 MIPS at 32 MHz, 28 KB of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. Its headline features are eXtreme Low-Power (XLP) operation from 1.8 V to 3.6 V, an integrated segmented LCD driver with charge pump, a 12-bit ADC2 with Computation, a 5-bit/10-bit DAC, multiple Core Independent Peripherals (CIPs) including CWG, CCP, PWM, SMT, ZCD, PPS, and a Real-Time Clock/Calendar (RTCC). The part comes in tape-and-reel packaging suitable for high-volume SMT assembly. Microcontrollers are programmable embedded computing devices that integrate a CPU, memory, and peripherals onto a single silicon die. Within that hierarchy, an 8-bit MCU like the PIC16LF19176 belongs to the PIC16 family of microcontrollers, which is a sub-family of the larger PIC microcontroller line, itself a major branch of the embedded microcontroller (MCU) product category, ultimately classified under integrated circuits and semiconductors. Engineers pick 8-bit MCUs when cost, deterministic interrupt response, and low power outweigh the raw throughput of 32-bit cores. This device targets battery-powered human-machine interfaces. XLP technology gives typical deep-sleep currents in the nanoamp range (per the datasheet IDD/DATA specifications), while the LCD charge pump supports glass types that require voltage rails above VDD. On-chip 12-bit ADC2 with oversampling and Burst Accumulate modes reduces external signal-conditioning cost; the DAC enables setpoint generation without a separate chip. The CIPs - Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Signal Measurement Timer (SMT), and Zero-Cross Detect (ZCD) - let timing- and waveform-sensitive functions run without CPU intervention, freeing the core for application code. Peripheral Pin Select (PPS) provides flexible digital I/O mapping across 35 I/O pins, easing PCB routing for mixed-signal boards. Typical applications include battery-powered consumer products with segmented LCDs (thermometers, blood-pressure monitors, remote controls), industrial sensor transmitters, IoT edge nodes, white-goods user interfaces, and metering/utility devices that demand long battery life and integrated analog signal chains. When designing with this part, verify the chosen package variant against board space early: the 44-pin TQFP in this MPN is the largest of the family, providing the most I/O; smaller 28-pin or 40-pin variants may require remapping signals. Also confirm the operating voltage window supports your LCD bias requirements, since some glass choices drive VDD toward the upper 3.6 V limit. This page synthesizes distributor pricing for the PIC16LF19176T-I/PT, drop-in same-family alternatives in the same 44-TQFP footprint, and practical design notes that complement the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19185-E/MV - 8-bit XLP MCU, 14KB Flash, 48-UQFN | Microchip
PIC16LF19185-E/MV

PIC16LF19185-E/MV - 8-bit XLP MCU, 14KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC16LF19185-E/MV is an 8-bit PIC microcontroller in the PIC16F191xx family with XLP (eXtreme Low Power) technology, 14 KB (8K x 14 words) of Flash program memory and a maximum CPU clock of 32 MHz. It is offered in a 48-pin UQFN (6 mm x 6 mm) package, integrating 1 KB RAM, 256 bytes EEPROM, an LCD driver, 12-bit ADC2, 5-bit/12-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS, RTCC, HLT, WWDT, and PMD peripherals in a single die. A microcontroller (microcontroller unit, MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), working RAM, and programmable peripherals around a shared bus. PIC16F19185 devices belong to the mid-range 8-bit MCU family that maps directly into the broader embedded-controller taxonomy of microcontroller -> embedded controller -> semiconductor. They use a RISC-style Harvard architecture with a 14-bit instruction word, which keeps code density high and dynamic power low - one of the reasons PIC mid-range MCUs dominate coin-cell and battery-powered designs. Key features of this part include a 32 MHz internal oscillator, an on-chip LCD driver with charge pump, 12-bit ADC with computation (ADC2), zero-cross detection (ZCD), signal-measurement timer (SMT), complementary waveform generator (CWG), peripheral pin select (PPS) for flexible I/O mapping, and the eXtreme Low-Power (XLP) sleep modes that drop quiescent current into the sub-1 uA range. The 'LF' prefix indicates the wide Vdd operating range of 1.8 V to 3.6 V, suitable for two-AA and lithium primary cells. Architecturally, the device is built around Microchip's enhanced mid-range core with hardware multiply and a vectored interrupt controller, supported by a configurable clock tree (HFINTOSC, LFINTOSC, MFINTOSC, SOSC) and a 32 kHz secondary oscillator for RTCC operation. Integrated core peripherals and PPS let engineers route digital functions to almost any GPIO, simplifying PCB layout and reducing the BOM. Typical applications include battery-powered human-machine interface (HMI) panels, low-cost thermostats and appliance controls, IoT sensor nodes with LCD readout, handheld medical monitors, and consumer remote controls. The combination of LCD driver, ADC2 and XLP makes this family a strong fit for any design that must display data while running from a small primary cell for years. The 48-UQFN package is the right choice when the PCB has limited area but the design still needs >30 GPIO, more than 32 KB-class 8-bit MCUs typically offer in smaller packages. When designing with this part, always place the 0.1 uF Vdd decoupling capacitor within 3 mm of the Vdd pin and route the analog AVdd/AVss pair as a Kelvin connection. Ensure unused I/O are configured as outputs low to minimize leakage in XLP sleep modes. This page synthesizes the latest distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, optimized for engineers evaluating the PIC16LF19185-E/MV for new designs or as a pin-compatible replacement.

見積もり お問い合わせ
PIC16LF19185-I/PT - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip
PIC16LF19185-I/PT

PIC16LF19185-I/PT - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF19185-I/PT is an 8-bit PIC16 microcontroller from the PIC16LF191xx family, featuring 32 MHz CPU speed, 14 KB Flash program memory, 1 KB RAM and 256 bytes of EEPROM, housed in a 48-pin TQFP (7x7 mm) package. It integrates eXtreme Low-Power (XLP) technology with a built-in charge pump for LCD drive, making it especially well-suited to battery-powered LCD applications. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path and a Harvard RISC core. Within the broader semiconductor taxonomy it sits below 16-bit and 32-bit MCUs and above fixed-function logic. PIC microcontrollers from Microchip are widely used for low-power, deterministic embedded control, and the PIC16LF191xx series extends that lineage with Core Independent Peripherals (CIPs) and Intelligent Analog that allow many tasks to run without CPU intervention. The 'LF' prefix denotes the low-power 'F' core variant optimized for 1.8V-3.6V operation. Key features include 14 KB self-programmable Flash, 1 KB SRAM, 256 bytes EEPROM, an integrated LCD driver with charge pump, a 12-bit ADC with Computation (ADC2), a 5-bit DAC, low-power comparator, zero-cross detect (ZCD), PWM, CCP, CWG (Complementary Waveform Generator), Peripheral Pin Select (PPS), Real-Time Clock/Calendar (RTCC), Windowed Watchdog Timer (WWDT), and Peripheral Module Disable (PMD) for granular power gating. The device supports up to 32 MHz internal oscillator operation. Architecturally, the PIC16LF19185 uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier, 16-level stack and 49 instruction set. Core Independent Peripherals such as the CWG, ZCD and PWM allow hardware-driven waveform generation that frees the CPU for application logic, while the ADC2 with automatic averaging and threshold comparison further reduces firmware load. Typical applications include battery-powered LCD consumer devices, IoT sensor nodes with displays, industrial metering (gas/water/electricity), portable medical monitors with LCD readout, home automation HMI panels, and rugged low-power remote controls. The integrated LCD charge pump eliminates an external boost IC. When designing with this part, pair the integrated LCD charge pump with low-quiescent LCD bias capacitors and use Peripheral Pin Select to remap peripherals without PCB rework. Active clock gating and PMD can lower sleep current to sub-uA levels for multi-year coin-cell operation. This page synthesizes distributor pricing from 8 channels, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop parametric view of the PIC16LF19185-I/PT.

見積もり お問い合わせ
PIC16LF19185T-I/MV - 8-bit 32MHz 14KB Flash XLP MCU | Microchip
PIC16LF19185T-I/MV

PIC16LF19185T-I/MV - 8-bit 32MHz 14KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF19185T-I/MV is a low-power 8-bit PIC16 microcontroller featuring 14KB Flash program memory, 1KB RAM, and 256 bytes EEPROM, housed in a 48-pin UQFN (MV) 6x6 mm package. Operating up to 32 MHz, the device targets eXtreme Low Power (XLP) applications with nanoWatt technology and integrates a 12-bit ADC2, 5-bit DAC, LCD driver, comparators, PWM, and the Peripheral Pin Select (PPS) routing fabric. A PIC microcontroller is a Harvard-architecture RISC processor optimized for embedded control, deterministic interrupt response, and low-power operation. Within the Microchip taxonomy, this part belongs to the PIC16F191xx family, which sits between the smaller PIC16F1xxx and higher-pin PIC18F/dsPIC33 families; it is engineered for human-machine interface (HMI) products where an integrated LCD driver and rich analog peripherals reduce bill of materials. Key features include 43 digital I/O lines, up to 32 MHz internal oscillator, hardware Real-Time Clock/Calendar (RTCC), Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), and SMT (Signal Measurement Timer). The nanoWatt XLP sleep currents are typically below 50 nA with RTCC retention, and the wide 1.8V-3.6V supply range supports single-cell Li-Ion or 2x AA battery topologies. The device is built on an enhanced mid-range core with 14-bit instruction word, 8-level hardware stack, and single-cycle 35 ns instruction execution. PPS allows digital peripherals to be remapped to virtually any I/O pin, simplifying PCB layout, while the CTMU provides capacitive touch and mTouch sensing capability for button replacement. Typical applications include battery-powered IoT sensor nodes, low-cost thermostats with LCD readouts, medical dosing pumps, and consumer remote controls. The integrated LCD controller directly drives segmented displays up to 128 segments, eliminating external driver ICs. When designing with this MCU, ensure that the 48-pin UQFN thermal pad is soldered to a sufficient copper pour to meet the 1.8V-3.6V brown-out reset threshold. Configuring PPS before enabling peripherals is mandatory to prevent spurious interrupts during startup. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19185T-I/PT - 8-bit MCU 14KB Flash 32MHz 48-TQFP | Microchip
PIC16LF19185T-I/PT

PIC16LF19185T-I/PT - 8-bit MCU 14KB Flash 32MHz 48-TQFP | Microchip

The Microchip Technology PIC16LF19185T-I/PT is a PIC® XLP™ 16F family 8-bit microcontroller delivering 32 MHz CPU performance with 14 KB (8K x 14) of Flash program memory in a 48-pin TQFP (7x7 mm) surface-mount package. It belongs to the PIC16LF191xx series that combines a low-power eXtreme Low Power (XLP) architecture with integrated 12-bit ADC, 5-bit/8-bit DAC, PWM, and up to 43 I/O pins for sensor and HMI front-ends. A PIC microcontroller is an 8-bit RISC MCU based on a Harvard architecture with separate program and data buses, designed for deterministic real-time control with very low active and sleep currents. The PIC16 family sits between the smaller PIC10/PIC12 baseline parts and the 16-bit dsPIC®/PIC24 families, targeting low-power embedded control in consumer, industrial, and IoT applications. The LF prefix denotes the wide-voltage 1.8V-3.6V operating range typical of XLP battery-powered designs. Key features of the PIC16LF19185T-I/PT include 14 KB self-programmable Flash, 1 KB RAM, a hardware 12-bit ADC with automated Capacitive Voltage Divider (CVD) for touch and proximity sensing, multiple PWM modules with complementary outputs, on-chip 5-bit and 8-bit DACs, and a peripheral pin select (PPS) engine that remaps digital peripherals to any I/O. The XLP variant adds deep sleep currents below 100 nA typical with retention, suiting battery-operated sensor nodes that spend most of their lifetime in sleep. Architecture-wise, the device uses Microchip's enhanced mid-range 8-bit CPU core with a hardware multiplier, 16-level stack, and C-compiler friendly architecture (XC8). Internal oscillator accuracy is roughly ±2% over voltage and temperature, removing the need for an external crystal in many designs. The 48-TQFP package exposes up to 43 GPIO pins plus dedicated power, programming, and MCLR pins, giving engineers enough I/O for displays, keypads, motor PWM, and multiple analog channels. Typical applications include consumer HMI with mTouch® capacitive buttons and sliders, low-power IoT sensor nodes, small home appliances, battery-powered medical wearables, LED lighting controllers, and industrial sensor interfaces. The combination of CVD touch hardware, 12-bit ADC, DAC, and PWM makes the PIC16LF19185T-I/PT well-suited to mixed-signal front-ends that previously required multiple discrete ICs. When designing with this part, pay attention to the LF voltage range of 1.8V-3.6V (use the PIC16F19185 variant for 5V systems), route decoupling capacitors close to VDD/AVDD/VBAT pins, and program the unused I/O as outputs low to minimize sleep current. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical low-power design notes not consolidated on the manufacturer product page.

見積もり お問い合わせ
PIC16LF19186-I/PT - 28KB Flash 8-bit MCU, 32MHz, LCD | Microchip
PIC16LF19186-I/PT

PIC16LF19186-I/PT - 28KB Flash 8-bit MCU, 32MHz, LCD | Microchip

The Microchip Technology PIC16LF19186-I/PT is an 8-bit PIC16 microcontroller in the PIC16F19186 family, featuring 28KB (16K x 14) of Flash program memory, 2KB of SRAM, and 256 bytes of Data EEPROM in a 48-pin TQFP (7x7) package. The LF prefix denotes the low-voltage variant operating from 1.8V to 3.6V, while the I suffix indicates the industrial -40C to +85C temperature range. The device runs at up to 32MHz on the enhanced mid-range PIC16 core with a 14-bit instruction set, executing most instructions in a single cycle. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic control of low-power embedded systems. PIC microcontrollers sit within the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Compared with 32-bit Cortex-M parts, 8-bit PICs trade raw throughput for predictable interrupt latency, ultra-low sleep current, and small code footprint - making them a mainstay in battery-powered consumer, industrial sensor, and human-interface designs. Key features include an integrated LCD driver with charge pump, 12-bit ADC2 with computation, 5-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS (Peripheral Pin Select), RTCC, and eXtreme Low Power (XLP) technology. The device exposes 43 I/O pins, supports up to 32MHz internal or external clock, and integrates Core Independent Peripherals that offload tasks from the CPU, reducing firmware complexity and active-mode current. Architecturally the PIC16LF19186 uses the enhanced mid-range core with a hardware multiplier and 16-level stack, complemented by a direct memory access path between the ADC and accumulator (ADC2 computation). The integrated segmented LCD controller supports up to 360 segments with variable bias and a charge pump that maintains contrast down to 1.8V, eliminating the need for an external bias generator. Typical applications include battery-powered LCD thermostats, household smart meters, medical glucose and infusion monitors, industrial sensor transmitters, IoT edge nodes with displays, and consumer remote controls. The wide peripheral set also fits automotive body controllers and HVAC panels when paired with the Q-graded variants. When designing with this part, reserve the PPS feature to remap digital peripherals after PCB layout, and budget the 256-byte EEPROM endurance of 100k write cycles for non-volatile parameter storage. Use the RTCC with an external 32.768kHz crystal for timekeeping; the part consumes under 1uA in RTCC retention mode, satisfying multi-year coin-cell lifetime targets. This page combines verified distributor pricing, drop-in same-package alternatives, and engineering design notes not assembled in the manufacturer datasheet alone, helping procurement and design teams accelerate the BOM decision.

見積もり お問い合わせ
PIC16LF19186T-I/MV - 28KB Flash 8-bit MCU with LCD | Microchip
PIC16LF19186T-I/MV

PIC16LF19186T-I/MV - 28KB Flash 8-bit MCU with LCD | Microchip

The Microchip Technology PIC16LF19186T-I/MV is an 8-bit PIC16 XLP family microcontroller delivering 32 MHz CPU performance with 28 KB Flash, 2 KB RAM, and 256 bytes of EEPROM in a 48-pin UQFN (6x6 mm) package. It is offered in the low-voltage 'LF' variant for 1.8V-3.6V operation and integrates an LCD driver, 12-bit ADC2, 5-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS, and RTCC peripherals. An 8-bit microcontroller (MCU) is a programmable processor with an 8-bit data path, on-chip Flash program memory, RAM, peripherals, and I/O in a single IC. Within the broader taxonomy, it sits under microcontroller -> embedded MCU -> microprocessor -> semiconductor. The 'PIC' core is Microchip's proprietary Harvard RISC architecture; the 'LF' suffix indicates the low-voltage / low-power XLP family optimized for battery-powered designs. Compared with 32-bit Cortex-M0 MCUs, the PIC16L line targets simpler, deterministic, low-power applications where code density, peripheral integration, and BOM cost matter more than raw MIPS. Key features include 32 MHz operation from 1.8V to 3.6V, 28 KB self-programmable Flash with device ID/protect, 2 KB SRAM, 256 B EEPROM, an integrated LCD driver for up to 288 segments, a 12-bit ADC with charge pump, and the XLP eXtreme Low-Power technology with sleep currents in the nanoampere range. Core Independent Peripherals (CIPs) such as CWG, SMT, ZCD, and configurable logic cells allow functions to run without CPU intervention, reducing firmware burden and active current. Architecturally the device pairs a 14-bit instruction-word PIC core with a wide peripheral set including Peripheral Pin Select (PPS) for flexible I/O mapping, RTCC for real-time clocking, and PWM/CCP for motor and lighting control. The integrated charge pump enables LCD operation below 3V without external boost components. Typical applications include battery-powered LCD thermostats and utility meters, IoT sensor nodes with segment displays, low-power medical monitors (e.g. glucose meters), consumer white goods with LCD UI, and industrial HMI panels. The wide peripheral mix suits designs needing analog sensing, timekeeping, and display drive in a single chip. When designing, verify that the chosen UQFN-48 footprint (0.4 mm pitch, 6x6 mm body with exposed pad) matches your PCB land pattern; the 'MV' suffix specifically designates UQFN, not the TQFP or QFN alternatives in this family. Plan for ICD/ICSP programming headers and review MPLAB X IDE compatibility for XC8 compiler support. This page synthesizes distributor pricing, drop-in same-package alternatives from the Site MPN list, and practical design notes not aggregated in the manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19186T-I/PT - 8-Bit XLP MCU, 28KB Flash, 48-TQFP | Microchip
PIC16LF19186T-I/PT

PIC16LF19186T-I/PT - 8-Bit XLP MCU, 28KB Flash, 48-TQFP | Microchip

The Microchip PIC16LF19186T-I/PT is an 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family featuring 28KB (16K x 14) of Flash program memory, 2KB of SRAM, and a maximum CPU clock of 32MHz, housed in a 48-pin TQFP (7x7 mm) package. The "LF" prefix denotes the low-voltage variant that operates from 1.8V to 3.6V, while the "F" version (PIC16F19186) extends operation up to 5.5V for 5V-tolerant systems. The suffix "T" indicates Tape & Reel packaging, "I" denotes the -40C to +85C industrial temperature range, and "/PT" identifies the 48-TQFP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, communication interfaces (UART, SPI, I2C), analog-to-digital converters (ADC), and I/O pins. The PIC16 architecture uses a modified Harvard RISC core, which separates program and data buses for predictable instruction timing. Within Microchip's portfolio, PIC16 sits between the PIC10/12/14 entry-level families and the PIC18 high-performance 8-bit family; battery-powered MCU applications typically pair PIC16LF devices with XLP (eXtreme Low Power) peripherals for sleep currents in the nanoamp range. The PIC16LF19186T-I/PT integrates XLP low-power technology with Core Independent Peripherals (CIPs) including CWG, NCO, and PWM, plus an integrated LCD driver with charge pump and high-current I/Os. It features a 12-bit ADC2 with computation (ADC^2), two 10-bit DACs, and a comprehensive set of communication peripherals. Designed for ultra-low-power battery applications, it supports sleep currents as low as 30 nA with RTC and an operating current of approximately 35 uA/MHz, which directly extends battery life in portable designs. Typical applications include battery-powered LCD instrumentation (utility meters, portable medical devices), IoT sensor nodes, automotive body controllers, low-power industrial sensors, consumer wearables, and remote control units. The integrated charge pump and high-current I/O make the part especially suited for direct LED drive and segmented LCD glass. When designing with this MCU, ensure your toolchain supports the PIC16F191xx device ID. MPLAB X IDE with XC8 compiler is the canonical development environment. Provide a stable decoupling network (100 nF + 10 uF) near each VDD pin pair and route the ICSP clock/data lines so they remain accessible for in-circuit programming on the production board. This page synthesizes distributor pricing for PIC16LF19186T-I/PT, drop-in alternatives within the PIC16LF191xx family, and practical design notes not found in the datasheet summary.

見積もり お問い合わせ
PIC16LF19195-E/MR - 8-bit 32MHz XLP MCU 14KB Flash LCD | Microchip
PIC16LF19195-E/MR

PIC16LF19195-E/MR - 8-bit 32MHz XLP MCU 14KB Flash LCD | Microchip

The Microchip Technology PIC16LF19195-E/MR is an 8-bit PIC microcontroller from the PIC16F19195/6/7 64-pin family, featuring 14KB (8K x 14) of Flash program memory, 1KB of SRAM, and 256 bytes of EEPROM. It executes instructions at up to 32 MHz via the internal HFINTOSC, integrates an LCD driver with charge pump, and is housed in a 64-pin 9x9 mm QFN package designated by the /MR suffix. The "LF" prefix indicates a wide 1.8V to 3.6V operating range tuned for low-voltage, battery-friendly designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU core, non-volatile program memory, working RAM, and a mix of analog and digital peripherals. The PIC16 family uses a RISC-style Harvard architecture that executes most instructions in one oscillator cycle, giving the PIC16LF19195-E/MR roughly 8 MIPS at its 32 MHz top speed. It sits inside the larger power-management-aware hierarchy of eXtreme Low-Power (XLP) PIC MCUs and shares a toolchain (MPLAB X IDE + XC8) with all modern PIC16 devices. Key features include eXtreme Low-Power (XLP) operation with active current typically below a few hundred µA/MIPS, an integrated LCD driver with selectable charge pump and high-current segment pins for direct backlight driving, a battery-backed Real-Time Clock/Calendar (RTCC), and Core Independent Peripherals (CIPs) such as CWG, CCP, PWM, SMT and ZCD that offload timing tasks from the core. The 12-bit ADC2 with internal channels, a 5-bit DAC, low-power comparators (LP COMP) and Peripheral Pin Select (PPS) provide flexible analog and pin routing. The 64-pin QFN exposes up to 58 I/O with PPS remapping. Typical applications include battery-powered thermostats and utility meters, remote controls and home automation keypads with segmented LCD, medical monitoring handhelds (glucometers, pulse oximeters), industrial sensor transmitters with RTCC-stamped logs, and IoT edge nodes driving small character displays. The LCD charge pump lets the design keep the display active even when the battery voltage falls below the LCD threshold. When designing with this part, budget 1 square inch of copper under the exposed pad for thermal relief, keep analog traces short, and place the 0.1 µF VDD bypass cap within 3 mm of the supply pin. Use MPLAB X IDE with the XC8 compiler and select the appropriate Low-Power Sleep mode (Retention Sleep vs. full Sleep) to fully exploit the XLP benefit in battery applications.

見積もり お問い合わせ
PIC16LF19195T-I/PT - 8-Bit 32MHz XLP MCU 14KB Flash LCD | Microchip
PIC16LF19195T-I/PT

PIC16LF19195T-I/PT - 8-Bit 32MHz XLP MCU 14KB Flash LCD | Microchip

The Microchip Technology PIC16LF19195T-I/PT is an 8-bit PIC microcontroller in the PIC® XLP™ 16F family featuring 14KB (8K x 14) flash program memory, 32 MHz maximum CPU speed, and a 64-pin TQFP (10x10 mm) package. The 'LF' prefix indicates the extended low-power (XLP) silicon process that supports operation down to 1.8V supply while retaining the full peripheral set. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a range of integrated peripherals. The PIC16F family uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, sitting hierarchically between baseline PIC10/12 devices and the higher-performance PIC18 and dsPIC families. The XLP variants add nanoWatt technology with multiple low-power sleep modes (typically sub-uA idle) that allow battery-powered designs to last years on a single cell. Compared with 32-bit Cortex-M parts, 8-bit PIC MCUs trade raw throughput for deterministic interrupt response, simpler toolchains, and lower cost. Key features include 1KB RAM, 256 bytes EEPROM, an integrated LCD driver with charge pump, 12-bit ADC with computation (ADC2), a 5-bit DAC, low-power comparators (LP COMP), multiple PWM/CCP/CWG channels, zero-cross detection (ZCD), peripheral pin select (PPS), and a battery-backed Real-Time Clock/Calendar (RTCC). High-current I/O pins are designed to directly drive LED backlighting without external transistors. Core Independent Peripherals (CIPs) such as CWG, NCO, and SMT off-load tasks from the CPU. Architecturally the device uses a Harvard memory layout with separate program flash and SRAM buses, hardware stack, and 31 kHz LFINTOSC plus 16 MHz HFINTOSC internal oscillators. The internal voltage reference and charge pump allow display operation from a single 1.8-3.6V supply. Intelligent analog integration (ADC2 with oversampling and filtering) reduces the external signal-conditioning BOM. Typical applications include battery-powered IoT sensor nodes with LCD displays, electronic shelf labels, medical glucose/thermometer meters, portable consumer appliances, and industrial HMI panels. The wide operating range and integrated LCD make it ideal for any mains-or-battery product that needs a segmented display without an external driver IC. When designing, reserve adequate decoupling (100 nF + 1 uF) close to VDD/AVDD pins, and follow Microchip AN1365 (LCD layout) for the SEG/COM routing to minimize ghosting. This page combines distributor pricing, drop-in alternatives, and design guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16LF19196-E/5LXVAO - 28KB Flash 8-bit XLP LCD MCU | Microchip
PIC16LF19196-E/5LXVAO

PIC16LF19196-E/5LXVAO - 28KB Flash 8-bit XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19196-E/5LXVAO is an 8-bit PIC16 XLP flash microcontroller featuring 28KB (16K x 14) of program memory, 2KB of SRAM, and 256 bytes of EEPROM in a 64-pin VFQFN exposed-pad (9x9) package. It operates from a wide 1.8V to 3.6V supply, includes an integrated LCD driver with charge pump, and supports AEC-Q100 automotive-grade qualification for safety-critical applications. The device runs the enhanced mid-range PIC16 CPU at up to 32MHz and provides a rich Core Independent Peripheral (CIP) set for low-power, mixed-signal designs. A microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory (SRAM), and a configurable set of digital and analog peripherals. Within the broader taxonomy, the PIC16LF19196 sits in the PIC16 mid-range family -> 8-bit RISC microcontroller -> MCU -> embedded microcontroller -> semiconductor. Compared with 16-bit or 32-bit Cortex-M parts, an 8-bit PIC16 lowers cost, code complexity, and active current, while still providing enough throughput for sensor hubs, HMI, and battery-powered LCD applications. Key differentiating features include Microchip's eXtreme Low-Power (XLP) technology with deep-sleep currents below 1 uA, an integrated LCD charge pump that simplifies glass drive from a single lithium cell, and CIP analog blocks such as 12-bit ADC, 5-bit DAC, comparators, and zero-cross detection. The 64-VQFN footprint with exposed pad supports thermally robust layouts for high-current I/O segments and reduces PCB area versus 64-pin TQFP when board real estate is constrained. On the architecture side, the PIC16LF19196 combines a 14-bit instruction word, a hardware multiplier, and a peripheral pin-select (PPS) engine that allows remapping of digital functions to optimize PCB routing. The 32MHz oscillator with 4x PLL equivalent provides deterministic interrupt latency critical for motor control loops, while the integrated charge pump and high-current I/O eliminate external DC-DC and segment-driver components in LCD user interfaces. Typical applications include battery-powered LCD thermostats, IoT sensor nodes with always-on displays, automotive dashboard indicators, medical infusion pumps, metering and instrumentation with segment LCDs, and ultra-low-power HMI keypads. The combination of XLP sleep current and integrated LCD drive makes the part especially attractive for products that need years of coin-cell life with a live alphanumeric or graphical segment display. When designing with this part, ensure the exposed pad is soldered to a sufficient copper pour (at least 1 square cm) so junction temperature stays within the -40C to +125C automotive range under full I/O loading. The PPS feature should be assigned early in the schematic to avoid pin-function conflicts in the 64-VQFN footprint, and unused pins must be tied to defined logic states (not left floating) for robustness in AEC-Q100 systems. This page consolidates distributor pricing, automotive-grade drop-in alternates, and design notes that complement the manufacturer datasheet for engineers sourcing automotive-grade PIC16 XLP LCD microcontrollers.

見積もり お問い合わせ
PIC16LF19196-E/MR - 28KB Flash XLP 8-bit MCU | Microchip
PIC16LF19196-E/MR

PIC16LF19196-E/MR - 28KB Flash XLP 8-bit MCU | Microchip

The Microchip Technology PIC16LF19196-E/MR is a 32 MHz 8-bit RISC microcontroller featuring 28 KB (16K x 14) of self-programmable Flash program memory and an integrated LCD driver, housed in a 64-pin QFN (9x9 mm) package. It belongs to the PIC16(L)F1919x family and combines the eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) and intelligent analog, targeting battery-powered LCD applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and I/O. Within the broader taxonomy, this part is a low-power 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor IC. The 'LF' prefix denotes the 1.8V-3.6V low-voltage variant of the PIC16 family, allowing direct operation from a single lithium cell or two AA cells, while the non-LF 'F' variant extends to 5.5V for regulated-rail designs. Key features of the PIC16LF19196-E/MR include 2 KB RAM, 256 bytes EEPROM, 12-bit ADC with 5-bit DAC reference support, zero-cross detect (ZCD), complementary waveform generator (CWG), signal measurement timer (SMT), peripheral pin select (PPS), real-time clock/calendar (RTCC), hardware limit timer (HLT), windowed watchdog timer (WWDT), and peripheral module disable (PMD). The integrated charge pump and high-current I/O drivers support direct LCD glass connection without external bias circuitry. The device uses Microchip's enhanced mid-range 8-bit core with a hardware multiply and 49-instruction set, executing one instruction per 2 system clock cycles at 32 MHz (8 MIPS effective). Its nanoWatt XLP technology provides sleep currents below 100 nA typical with RTCC retention, making it one of the lowest-power PIC16 devices in its class. Typical applications include battery-powered blood glucose meters, wireless environmental sensor nodes with LCDs, industrial panel meters, smart thermostats, e-bike dashboards, IoT edge nodes with display feedback, and handheld medical devices where long battery life and on-glass LCD drive are mandatory. The 59 available I/O lines support keypad scanning and segment multiplexed LCDs simultaneously. When designing with this part, choose the LF variant for 1.8V-3.6V battery systems; use the F variant only when a regulated 5V rail is available. Verify LCD bias network sizing using the Microchip AN1365 application note, and confirm segment/commons match the package pinout (the 64-QFN provides up to 59 I/O plus dedicated LCD SEG/COM). Use MPLAB X IDE with XC8 compiler for firmware development. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in same-brand and cross-brand alternatives, and practical design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC16LF19196-E/PT - 8-bit 32MHz XLP LCD MCU 28KB Flash | Microchip
PIC16LF19196-E/PT

PIC16LF19196-E/PT - 8-bit 32MHz XLP LCD MCU 28KB Flash | Microchip

The Microchip Technology PIC16LF19196-E/PT is an 8-bit PIC16 microcontroller from the XLP family that combines eXtreme low-power operation with integrated LCD drive and Core Independent Peripherals (CIPs), housed in a 64-pin TQFP (10x10 mm) package. It runs at up to 32 MHz, integrates 28 KB of Flash program memory (16K x 14 words), 2 KB of RAM, and 256 bytes of EEPROM, and supports 59 digital I/O lines for sensor and user-interface connectivity. The -E suffix designates the -40C to +125C extended operating temperature range required for industrial and automotive-grade applications. An 8-bit PIC microcontroller is a RISC-based, Harvard-architecture embedded processor that executes one instruction per clock cycle (except branches) and is positioned in Microchip's product hierarchy as PIC -> PIC16 -> PIC16F19xx -> XLP family. The 'LF' in the part number indicates the low-power F-version core, which supports lower Vdd operation than the standard F variant, while 'XLP' (eXtreme Low Power) is Microchip's branded low-power technology family targeting battery-powered and energy-harvesting designs. The integrated charge pump and high-current I/O make this sub-family especially suited for battery-powered LCD applications where discrete LCD bias generation would otherwise inflate BOM cost. Key features include a 12-bit ADC with computation (ADC2), a 5-bit/10-bit DAC, low-power comparators (LP COMP), PWM, CCP, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), ZCD (Zero-Cross Detect), Peripheral Pin Select (PPS), RTCC (Real-Time Clock Calendar), Hardware Limit Timer (HLT), Windowed WWDT, and PMD (Peripheral Module Disable). The 32 MHz internal oscillator plus integrated LCD driver (up to 288 segments) make this part well suited for low-power graphical or segment LCD products. Technical depth: the LF core operates from 1.8 V to 3.6 V (down to 1.8 V at 16 MHz, 2.5 V to 3.6 V at 32 MHz) with a typical sleep current in the nanoampere range thanks to XLP technology. The 12-bit ADC2 provides automated averaging, accumulation and threshold comparison without CPU intervention (CIP), freeing the core for power management tasks. PPS allows most digital peripherals to be remapped to a wide selection of I/O pins, simplifying PCB routing on densely-populated 64-pin designs. Typical applications include battery-powered medical devices, industrial sensor transmitters, IoT edge nodes, home-automation HMI panels, smart thermostats, and low-power metering. The integrated LCD driver makes it especially attractive for appliances and instruments with segment displays. Design consideration: pair the MCU with a CR2032 or two AA cells via a boost regulator to leverage XLP sleep currents below 1 uA; verify LCD contrast across temperature and confirm PPS mapping for all peripherals during firmware bring-up.

見積もり お問い合わせ