集積回路

サブカテゴリ

📁 ADC/DAC 2520 製品 📁 アンプIC 800 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 314 製品 📁 DSP 963 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1603 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18756 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32865)

PIC18LF8722-I/PT - 8-bit 40MHz 128KB Flash MCU 80-TQFP | Microchip
PIC18LF8722-I/PT

PIC18LF8722-I/PT - 8-bit 40MHz 128KB Flash MCU 80-TQFP | Microchip

The Microchip PIC18LF8722-I/PT is a high-performance 8-bit RISC microcontroller from the PIC18F family, featuring a 40 MHz CPU clock, 128 KB of Flash program memory (64K x 16), and 4 KB of SRAM in a 12x12 mm 80-pin TQFP surface-mount package. As part of the PIC18LF series, it supports wide operating voltages of 2.0V to 5.5V and integrates Microchip's nanoWatt technology for power-managed operation in battery-backed applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog-to-digital converters on one silicon die. Within the broader hierarchy, microcontrollers sit below microprocessors (which require external memory) and belong to the embedded computing category. The PIC18LF8722 belongs to the 8-bit class of microcontrollers and uses a modified Harvard RISC architecture with a 16-bit instruction word that is byte-addressable for data, optimizing both code density and execution throughput. Key features of the PIC18LF8722-I/PT include 70 general-purpose I/O pins, four serial communication ports (two MSSP for I2C/SPI and two EUSART LIN-capable UARTs), a 10-bit ADC with up to 16 channels, multiple 8/16-bit timers, a 16-bit capture/compare/PWM module, and nanoWatt power management with multiple sleep modes. The 80-pin TQFP package provides ample I/O expansion and supports high pin-count designs while still being hand-solderable with proper tooling. The PIC18LF8722 is engineered around a 16-bit enhanced instruction set with an 8-bit data path, featuring hardware multiplier and DC-to-83K data EEPROM emulation. Its C-optimized architecture simplifies ANSI C compilation, and the integrated ICD (In-Circuit Debugger) interface enables cost-effective development through Microchip's MPLAB and ICD tools. Typical applications include industrial control panels with graphical LCD interfaces, automotive body controllers, building automation HVAC systems, sensor data acquisition nodes, USB peripherals (with external transceiver), motor control with PWM feedback, and medical instrumentation. The dual serial port set allows simultaneous connectivity to sensor buses (I2C) and wireless modules (UART) within the same firmware. Designers should review the PIC18LF8722-I/PT datasheet for the proper external crystal, decoupling, and MCLR configuration to ensure reliable startup. Configuring the configuration bits (CONFIG1H through CONFIG3H) correctly is critical for oscillator selection, watchdog timer behavior, brown-out reset threshold, and code protection. This page consolidates distributor pricing, drop-in compatible alternatives from the same PIC18F family, and practical design notes to help engineers select, source, and integrate the PIC18LF8722-I/PT more efficiently than consulting the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18LF8723T-I/PT - 8-bit MCU, 128KB Flash, 40MHz, 80-TQFP | Microchip
PIC18LF8723T-I/PT

PIC18LF8723T-I/PT - 8-bit MCU, 128KB Flash, 40MHz, 80-TQFP | Microchip

The Microchip Technology PIC18LF8723T-I/PT is an 8-bit RISC PIC microcontroller featuring 128KB of Flash program memory (64K x 16), 40 MHz operation, and an integrated 12-bit ADC, packaged in an 80-pin TQFP (12x12 mm). The 'LF' prefix designates the low-voltage variant, supporting operation across an extended 2.0V to 5.5V supply range, while the 'T' suffix indicates tape-and-reel packaging and the 'I' industrial temperature grade spans -40C to +85C. According to the manufacturer description, the device targets the peripheral-rich PIC18F family and combines high-performance 16-bit instruction words with 8-bit data paths for efficient code density. What is an 8-bit PIC microcontroller? It is a Harvard-architecture microcontroller based on a Reduced Instruction Set Computer (RISC) core that executes instructions in a single cycle (except for branches), with separate program and data buses that allow simultaneous fetch and access. The PIC18LF8723 belongs to the PIC18F family -> PIC microcontroller family -> 8-bit MCU category -> embedded processors. Compared with 16-bit and 32-bit MCUs, the PIC18 architecture remains attractive for cost-sensitive and deterministic-control applications where a wide peripheral set, mature toolchain (MPLAB X IDE, XC8 compiler), and proven long-term availability outweigh raw computational throughput. Key features include 128KB self-programmable Flash, 3.84KB of general-purpose SRAM, 1KB of non-volatile EEPROM, a 12-bit ADC with up to 16 channels, two analog comparators, two CCP modules, one Enhanced CCP (ECCP), three USART modules, two MSSP (SPI/I2C) ports, two 8-bit timers and three 16-bit timers, a 16-bit wide data path, an 8x8 hardware multiplier, and an extended instruction set that improves C code efficiency. The PIC18LF8723 also supports parallel slave/enhanced parallel ports for external bus interfacing, making it suitable for systems that must connect to external memory or ASIC peripherals. Typical applications include industrial automation controllers, automotive body and HMI modules, white-goods and appliance main boards, motor control and inverter front-ends, USB and CAN gateway bridges, LCD graphic displays, and any low-voltage embedded system requiring high pin count and rich peripheral integration. The 80-TQFP package exposes ample I/O for keypad scanning, multiple serial channels, and parallel expansion buses. Design considerations include placing decoupling capacitors within 5 mm of each VDD/VSS pair, ensuring the internal 31 kHz low-power oscillator or external crystal meets the PLL requirements if high-speed USB or CAN is used, and selecting the LF (low-voltage) variant explicitly when the rail is 3.3V rather than 5V. Industrial users should pair this MCU with proper ESD protection on exposed connectors and route the analog VDD/VSS pair as a separate island. This page combines manufacturer specifications, distributor pricing context, and drop-in replacement candidates not consolidated on any single competitor page.

見積もり お問い合わせ
PIC18LF96J65-I/PT - 8-Bit 41.667MHz 96KB Flash MCU | Microchip
PIC18LF96J65-I/PT

PIC18LF96J65-I/PT - 8-Bit 41.667MHz 96KB Flash MCU | Microchip

The Microchip Technology PIC18LF96J65-I/PT is an 8-bit PIC18J-series microcontroller featuring a 41.667MHz PIC core, 96KB (48K x 16) of Flash program memory, 3808 bytes of RAM, and an integrated 10 Mbps Ethernet MAC, all housed in a 100-pin TQFP (14x14 mm) package. The 'LF' prefix indicates a low-voltage (2.0V to 3.6V) variant suited to battery-powered and energy-conscious designs, while the 96J65 family adds an embedded Ethernet controller for networked embedded systems. An 8-bit PIC microcontroller is a Harvard-architecture RISC device that executes one instruction per clock cycle (except branches), using separate program and data buses to allow simultaneous instruction fetch and data access. Within the broader taxonomy it sits as PIC -> microcontroller (MCU) -> embedded controller -> semiconductor IC. PIC18 devices are the high-end tier of the 8-bit PIC family, offering extended instruction set (1.5K x 16 instructions), linear program memory up to 2 MB, hardware multiplier, and rich peripheral integration compared to baseline PIC10/12/16 parts. Key features include 70 general-purpose I/O pins, an internal oscillator, two USARTs, two MSSP (SPI/I2C) modules, two CCP modules, a 10-bit ADC with up to 16 channels, a parallel slave port, and the integrated MAC with MII/RMII interfaces for external PHY connection. Real-time hardware capabilities such as five 16-bit timers and an RTCC reduce software overhead for deterministic control loops. The Ethernet MAC is the headline differentiator, enabling single-chip TCP/IP connectivity without an external protocol controller. The architecture combines a 16-bit instruction word with 8-bit data paths, including a hardware 8x8 multiplier and barrel shifter for arithmetic throughput. The 3808-byte SRAM supports Ethernet packet buffers plus application variables, and Flash program memory is self-programmable under software control for bootloader or field-update use cases. Typical applications include industrial automation nodes, building automation gateways, home-control and security panels, networked instrumentation, and remote monitoring equipment. The integrated Ethernet plus rich I/O count makes the device a single-chip bridge between sensors/actuators and an IP network. When designing with this part, plan the oscillator strategy early because Ethernet requires a precise 25 MHz or 50 MHz reference, and validate that PHY-MAC voltage rails align with the low-voltage 'LF' range. For drop-in scaling within the PIC18LF family, the 64-pin and 80-pin PIC18LF87J/J65 variants share the same peripheral set but offer fewer I/O. This page consolidates distributor pricing, parametric drop-in alternatives, and practical design considerations not found in the manufacturer datasheet, giving engineers a faster path to qualified component selection.

見積もり お問い合わせ
PIC24EP128GP202-E/SS - 16-bit 128KB Flash MCU, AEC-Q100 | Microchip
PIC24EP128GP202-E/SS

PIC24EP128GP202-E/SS - 16-bit 128KB Flash MCU, AEC-Q100 | Microchip

The Microchip Technology PIC24EP128GP202-E/SS is a 16-bit PIC microcontroller in the PIC24EP family, housed in a 28-pin SSOP (5.30 mm width) package with 128 KB of Flash program memory (43K x 24), 8 KB of RAM, and a maximum CPU speed of 60 MIPS. It operates from 3.0 V to 3.6 V and is AEC-Q100 qualified, supporting automotive-grade deployments. What is a PIC24E microcontroller? The PIC24E is Microchip's 16-bit enhanced general-purpose MCU family, positioned between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts in the taxonomy (16-bit MCU -> microcontroller -> embedded processor -> semiconductor). It uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction word, and dedicated DSP engine, giving it the math density of a small DSP without leaving the 16-bit ecosystem. The 'EP' suffix denotes 'Enhanced Performance' (70 MIPS capable core), and 'GP' indicates the general-purpose variant as opposed to motor-control (MC) or USB (GP50X) siblings. Key features of this device include an integrated 10/12-bit ADC (up to 1.1 Msps), two internal operational amplifiers (op amps), a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight, and a Peripheral Trigger Generator (PTG) for hardware-state-machine automation. Connectivity includes I2C, SPI, UART/USART, IrDA, and LINbus. A built-in 16-bit timer/capture/compare and PWM module supports motor-control and power-conversion loops. Architecturally, the PIC24EP128GP202 uses a single-cycle 70 MIPS core with hardware multiply/divide, a 16-channel DMA engine for low-CPU-overhead data movement, and a 2.0 V to 3.6 V core supply with on-chip voltage regulation. The 'E' suffix indicates the -40C to +125C extended operating temperature range, and 'SS' is the SSOP-28 package code. Typical applications include automotive body and chassis ECUs, LIN-bus nodes, sensor-conditioning front-ends using the on-chip op amps, BLDC/PMSM motor control, LED lighting drivers, and industrial HMI panels. The combination of AEC-Q100 grade, ample analog integration, and 60 MIPS headroom suits cost-sensitive automotive nodes. Design trade-off: this part's 28-pin SSOP footprint limits I/O count to roughly 21 usable GPIO versus larger PIC24EP variants (44/64/100-pin). When selecting pin-compatible alternatives, focus on memory size, ADC channel count, and op-amp availability rather than raw pin count.

見積もり お問い合わせ
PIC24EP128GP202-H/MM - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202-H/MM

PIC24EP128GP202-H/MM - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202-H/MM is a 16-bit microcontroller and digital signal controller from the PIC24E general-purpose family, featuring a high-performance 70 MIPS core with 128 KB of Flash program memory and 16 KB of SRAM, packaged in a 28-pin QFN (MM). The part carries an extended-temperature "H" suffix indicating an operating range of -40C to +150C, making it suitable for harsh-environment and automotive-grade applications. The -H/MM variant is specifically graded for high-temperature operation beyond the standard industrial range. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device built around a 16-bit data path and register file, sitting in the hierarchy between 8-bit microcontrollers (e.g., PIC16, PIC18, ATmega) and 32-bit microcontrollers (e.g., ARM Cortex-M). 16-bit MCUs like the PIC24E family deliver deterministic real-time control, on-chip DSP capability, and richer peripherals than 8-bit parts while remaining simpler and lower-power than 32-bit Cortex-M devices. They are widely deployed in motor control, power conversion, industrial sensing, and audio processing where the combination of DSP throughput and deterministic interrupt latency is essential. Key features of the PIC24EP128GP202 include a 70 MIPS CPU core, dual operational amplifiers on-chip, a high-speed 10/12-bit ADC with up to 1.1 Msps sampling, Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and the Peripheral Trigger Generator (PTG) for hardware-driven peripheral sequencing. The device also integrates high-speed PWM, multiple UART/SPI/I2C interfaces, and a configurable oscillator block. Together, these peripherals enable single-chip implementations of advanced motor-control, lighting, and analog-signal-conditioning designs. Architecturally, the PIC24E core uses a modified Harvard structure with separate program and data buses, a 16 x 16-bit working register array, and a hardware DSP engine for single-cycle MAC operations. The on-chip op-amps and 1 Msps ADC allow direct conditioning and digitization of analog signals without external analog front-end ICs, reducing BOM cost and PCB area. The 70 MIPS throughput gives 14.3 ns instruction-cycle time, supporting fast closed-loop control loops at PWM frequencies above 100 kHz. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), digital power conversion (AC-DC, DC-DC, and PFC stages), automotive sensor interfaces, LED lighting controllers, solar inverters, and battery management systems. The extended -40C to +150C operating range of the -H/MM grade makes it particularly suited for under-hood automotive electronics, outdoor industrial equipment, and any application where the ambient temperature exceeds standard commercial or industrial limits. When designing with this MCU, allocate sufficient decoupling capacitance near the VDD/VSS pairs (typically 100 nF plus bulk) and ensure the PCB layout keeps analog and digital ground returns separated before joining at a single point near the device. For high-temperature operation, derate output drive strength and verify oscillator startup behavior at the cold-side extreme. This page synthesizes distributor pricing, application-specific design notes, and cross-references against the wider PIC24E family - information not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24EP128GP202-H/SO - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202-H/SO

PIC24EP128GP202-H/SO - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202-H/SO is a 16-bit PIC microcontroller from the PIC24E general purpose family, featuring a high-speed 70 MIPS core, 128 KB of Flash program memory, and 16 KB of RAM in a 28-pin SOIC package. It operates across an industrial temperature range up to 150 C, targets AEC-Q100 automotive applications, and includes integrated peripherals such as high-performance ADCs, CTMU, operational amplifiers, and the Peripheral Trigger Generator (PTG) for high-end general purpose designs. Core performance is rated at 60 MIPS in the datasheet electrical characteristics, while the marketing literature cites 70 MIPS peak throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals on a single die. The 16-bit PIC24E family sits in the high-performance tier of Microchip's dsPIC/PIC portfolio: it offers higher MIPS, larger memory, and richer analog peripherals than the 16-bit PIC24F family, while costing less than the dsPIC33 DSP-capable siblings. The PIC24EP128GP202 specifically targets applications that need substantial code space (128 KB Flash) and ample SRAM (16 KB) for buffering, while remaining in a small-footprint 28-pin package. Key features include 128 KB (43K x 24) self-programmable Flash, 16 KB SRAM, multiple 16-bit timers, configurable logic cells, and a 12-bit ADC with up to 1.1 Msps conversion rate. The integrated op amps and CTMU remove the need for many external analog components, allowing smaller BOMs in sensor-interface and signal-conditioning designs. Communication peripherals cover UART, SPI, I2C, and ECAN, supporting both point-to-point and networked embedded links. Architecturally, the device uses a modified Harvard architecture with separate program and data buses, plus a 24-bit instruction word that allows single-cycle operations on data words larger than 16 bits. The PTG is a unique peripheral that lets the CPU offload complex timing and trigger sequences to hardware, freeing the core for application code and improving deterministic behavior in real-time systems. Typical applications include automotive sensor conditioning, industrial motor control front-ends, building automation, LED lighting controllers, and portable medical instruments where AEC-Q100 qualification, integrated op amps, and the PTG simplify design. The -H suffix indicates the high-temperature (-40C to +150C) operating range suited for under-hood automotive and other harsh environments. When designing with this part, ensure you use the latest MPLAB X IDE and XC16 compiler to access the PTG libraries and the integrated op amp configuration macros. Decoupling should follow Microchip's 28-pin SOIC reference layout, with a 100 nF plus a 10 uF bulk capacitor within 5 mm of the VDDCORE and VDD pins.

見積もり お問い合わせ
PIC24EP128GP202-H/SP - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202-H/SP

PIC24EP128GP202-H/SP - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202-H/SP is a 16-bit PIC microcontroller from the PIC24EP general-purpose MCU family, running at 70 MIPS core speed with 128 KB (43K x 24) of Flash program memory and AEC-Q100 automotive qualification, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package. The -H temperature suffix denotes the high-temperature grade of -40C to +150C operation, distinguishing it from the -I (industrial -40C to +85C) and -E (extended -40C to +125C) siblings in the same family. A PIC microcontroller is a programmable embedded processor that integrates CPU, Flash, RAM, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: microcontroller -> embedded MCU -> digital signal controller -> semiconductor. The PIC24EP family uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction width, and hardware DSP support for signal-processing tasks. It is a Digital Signal Controller (DSC) class device, bridging generic microcontrollers and dedicated DSPs. Key features of the PIC24EP128GP202 include up to 70 MIPS performance from a single 3.0V to 3.6V supply, internal operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, a Peripheral Trigger Generator (PTG) for automating peripheral sequencing, and superior ADC performance aimed at high-end general-purpose applications. The on-chip op amps reduce external analog BOM in sensor-conditioning circuits. The architecture integrates a high-speed 70 MIPS core with multi-channel 10-bit/12-bit ADCs, PWM, I2C, SPI, UART, and enhanced timers. The combination of op amps + CTMU + PTG means a single chip can handle analog front-end conditioning, capacitive sensing, and timing-critical event sequencing without external glue logic. Typical applications include automotive body and powertrain subsystems, industrial motor control, white-goods inverters, UPS power-factor correction, multi-loop PID control loops, sensor conditioning with on-chip op amps, and capacitive-touch user interfaces. The wide temperature range also suits outdoor industrial and renewable-energy installations. When designing with this part, plan input clock options (HS, XT, EC, FRC) early because the 70 MIPS throughput depends on stable clocking; place decoupling caps within 5 mm of each VDD/VSS pair. For automotive designs, ensure the -H grade's 150C junction limit is respected at maximum ambient plus self-heating derating. This page synthesizes distributor pricing, AEC-Q100 cross-brand alternatives, and SPDIP 20-pin/28-pin drop-in guidance not found in any single distributor listing, providing engineers a single decision-ready reference for automotive-grade PIC24 MCU selection.

見積もり お問い合わせ
PIC24EP128GP202-I/SO - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP202-I/SO

PIC24EP128GP202-I/SO - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP202-I/SO is a 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS core performance with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin SOIC (300 mil) package. It combines high-speed DSP capability with rich on-chip analog peripherals including dual op-amps, a 12-bit ADC with 16 channels, four analog comparators, and a Charge Time Measurement Unit (CTMU), all operating from a single 3.0 V to 3.6 V supply. The core executes most instructions in one cycle, giving a 70 MHz FOSC equivalent throughput suitable for real-time control loops and digital signal processing. A 16-bit microcontroller (MCU) is a programmable processor with 16-bit data paths, registers, and ALU, offering higher code density and arithmetic precision than 8-bit MCUs while remaining easier to use than 32-bit parts. PIC24EP devices sit in the mid-range of Microchip's dsPIC/PIC24 portfolio and target applications where both deterministic control and DSP-class math (filtering, FFT, modulation) are required on a single chip, bridging the gap between simple 8-bit MCUs and more complex ARM Cortex-M parts. They are descendants of the Harvard-architecture PIC lineage and include DSP extensions for MAC operations. Key features include 21 general-purpose I/O pins, two UART modules, two SPI interfaces, two I2C interfaces, five 16-bit timers plus two 32-bit timers, a Peripheral Trigger Generator (PTG) for hardware sequencer applications, and high-speed PWM outputs. The CTMU enables touch sensing and precise time-of-flight measurements by combining a constant-current source with the ADC. Programming is supported via Microchip's MPLAB X IDE with the XC16 compiler and ICD/Real ICE debug tools. Typical applications include industrial sensor conditioning using the on-chip op-amps, motor control reference designs, digital power conversion with high-speed PWM, medical instrumentation signal chains, LED lighting control, and automotive body/comfort modules (the automotive-grade version is the PIC24EP128GP202-E/SO). The PTG combined with DMA enables sophisticated waveform generation without CPU intervention, useful in switched-mode power supplies and lighting ballasts. When designing with this device, ensure all VDD/VSS pairs are decoupled with 100 nF ceramics placed within 5 mm of the package pins, and respect the 3.0 V to 3.6 V supply window because PIC24EP devices do not include an internal regulator on the I/O supply rail. For new designs migrating from PIC24F, verify that the 28-SOIC pinout and ICSP programming pins match your debug adapter before reusing existing layouts. This page synthesizes distributor pricing, parametric drop-in alternatives, and engineering design notes for the PIC24EP128GP202-I/SO in the 28-pin SOIC package - content not consolidated on the manufacturer product page or standard distributor listings.

見積もり お問い合わせ
PIC24EP128GP202T-E/MM - 16-bit 70 MIPS MCU, 128KB Flash, 28-QFN | Microchip
PIC24EP128GP202T-E/MM

PIC24EP128GP202T-E/MM - 16-bit 70 MIPS MCU, 128KB Flash, 28-QFN | Microchip

The Microchip Technology PIC24EP128GP202T-E/MM is a 16-bit PIC microcontroller from the PIC24EP family, featuring a high-performance 70 MIPS core, 128 KB of Flash program memory, and 16 KB of SRAM in a 28-pin VQFN (MM) package with exposed thermal pad. It is supplied in tape-and-reel packaging and is qualified to the AEC-Q100 automotive standard, making it suitable for automotive and industrial embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O ports. PIC24E devices belong to the 16-bit DSC (Digital Signal Controller) family, positioned in Microchip's portfolio between the 8-bit PIC16/PIC18 architectures and the 32-bit PIC32 families. PIC24E parts add DSP-grade MAC instructions, advanced analog peripherals, and higher clock rates than the PIC24F predecessors. Key features of the PIC24EP128GP202 include a 16-bit wide data path, 70 MIPS performance from a 70 MHz system clock, dual 10-bit/12-bit capable ADC channels, up to six 16-bit timers, peripheral trigger generator (PTG), op amps, and CTMU (Charge Time Measurement Unit) for capacitive touch and current measurement. AEC-Q100 qualification and the extended -40C to +125C operating range are explicit advantages of the E/MM temperature/grade suffix combination. The architecture combines a Harvard bus with on-chip 32x16 hardware multiply, providing deterministic execution needed for motor-control loops and real-time DSP filtering. The PIC24E instruction set adds DO and REPEAT hardware loops, MAC (multiply-accumulate) for DSP kernels, and bit-field instructions for efficient peripheral control. With 128 KB Flash (43K x 24 words) and 16 KB SRAM, the part targets mid-range firmware footprints typical in body electronics, sensor fusion, and audio processing. Typical applications include automotive body and comfort modules, sensor interface boards, motor control pre-drivers, low-cost digital power conversion, and industrial sensor hubs. The AEC-Q100 grade also extends use to under-hood and chassis ECUs when paired with proper external protection. When designing with this MCU, ensure a low-impedance ground return under the exposed pad to meet thermal and EMI expectations, and configure the alternate I/O mapping table early to avoid pin conflicts. Decoupling should follow Microchip's 100 nF per VDD + bulk 10 uF guidance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, and should be read alongside the official Microchip PIC24EP128GP202 datasheet (DS70621 family).

見積もり お問い合わせ
PIC24EP128GP202T-E/SS - 60 MIPS 16-bit MCU, 128KB Flash, SSOP-28 | Microchip
PIC24EP128GP202T-E/SS

PIC24EP128GP202T-E/SS - 60 MIPS 16-bit MCU, 128KB Flash, SSOP-28 | Microchip

The Microchip Technology PIC24EP128GP202T-E/SS is a 16-bit RISC microcontroller from the PIC24E general-purpose MCU family, integrating 128 KB (43K x 24) of Flash program memory and 8 KB of RAM, and supplied in a 28-pin SSOP package on tape-and-reel for automotive (AEC-Q100) applications. It is powered by a high-performance 70 MIPS (60 MIPs in the -E extended temperature grade) modified-Harvard core that pairs a 16-bit data path with DSP-oriented instructions, supporting deterministic real-time control and digital signal processing in a single device. The 28-SSOP footprint measures 5.30 mm wide, suiting compact PCB layouts where board area is constrained. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is an embedded computing device whose central processing unit operates on 16-bit data words, a sweet spot for general-purpose control: wider registers and arithmetic units than 8-bit MCUs (more efficient at integer math, table lookups, and DSP kernels) but lower cost and power than 32-bit Cortex-M parts. The PIC24E family sits in the broader taxonomy 16-bit MCU -> dsPIC/PIC24 -> microcontroller -> embedded computing -> semiconductor. AEC-Q100 Grade 1 qualified variants such as this -E part are screened for -40C to +125C operation and automotive reliability stresses. Key features include a 10/12-bit ADC with up to 500 ksps conversion, three on-chip operational amplifiers, three comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, two on-chip op amps, a Peripheral Trigger Generator (PTG) for chained timing sequences, and a 70 MIPS core for fast closed-loop control. A 4-channel DMA engine, multiple 16-bit timers, and PWM peripherals offload the CPU in motor, power, and lighting applications. Architecturally, the PIC24EP128GP202T-E/SS combines a 16-bit core with 24-bit instruction words, dual-bank Flash with self-programmability, ECC-protected program memory, and a peripheral set with hardware CRC. The -E suffix denotes the extended industrial temperature grade -40C to +125C and AEC-Q100 automotive qualification, making the part suitable for under-hood and safety-critical subsystems. Typical applications include automotive body and chassis ECUs, BLDC/PMSM motor control, industrial control and PLCs, LED lighting drivers, digital power conversion, and consumer appliance control. The on-chip op amps simplify current sensing in motor drives, and the CTMU enables capacitive touch user interfaces. When designing with this MCU, allocate the VDD/CORE pair correctly (3.0V-3.6V) and place decoupling capacitors within 5 mm of each supply pin. Use MPLAB X IDE with the XC16 compiler for development and program/debug via ICSP on PGECx/PGEDx. AEC-Q100 grade parts require factory-traceable lot records for end-of-line traceability. This page synthesizes distributor pricing, parametric comparison, AEC-Q100-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data anchored to Microchip's DS70621 PIC24E Family Reference Manual and live distributor listings as of 2026-09-29.

見積もり お問い合わせ
PIC24EP128GP202T-I/MM - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP202T-I/MM

PIC24EP128GP202T-I/MM - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP202T-I/MM is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS performance from a modified Harvard architecture core, packaged in a 28-pin QFN-S (6x6 mm) with exposed thermal pad. It integrates 128 KB of Flash program memory (43K x 24 words) and 8 KB of SRAM, supports 3.0V to 3.6V single-supply operation, and provides rich analog peripherals including a 10/12-bit ADC, operational amplifiers, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for deterministic peripheral sequencing without CPU intervention. A 16-bit MCU is a microcontroller whose data path, registers, and ALU natively operate on 16-bit words, giving roughly an order-of-magnitude higher code density and arithmetic throughput than 8-bit cores at comparable clock rates. Within the broader taxonomy, the PIC24EP family sits above the PIC24F and PIC24H families, below the dsPIC33 DSC family, and is part of Microchip's PIC24 general-purpose 16-bit MCU line, which targets deterministic real-time control at low power. The 70 MIPS figure is derived from a 70 MHz maximum oscillator with a 2:1 instruction-cycle divider, so a single source line is executed per two clock cycles. Key differentiating features of the PIC24EP128GP202T-I/MM include up to 70 MIPS CPU throughput, dual op-amp front-ends for in-package analog conditioning, a CTMU for capacitive touch and precise time-of-flight measurement, the PTG for offloading trigger patterns from the CPU, and a Peripheral Pin Select (PPS) remappable I/O scheme that simplifies PCB routing. The device also integrates a 16-bit Parallel Master Port (PMP) option on select pins, multiple UART/SPI/I2C modules, hardware DMA, and a 16-bit timer/capture/PWM engine. The "-I" industrial temperature grade spans -40C to +85C and the "-MM" suffix denotes the 28-pin QFN-S 6x6 mm package. Architecture-wise, the PIC24EP core separates program and data buses (modified Harvard) and uses a 24-bit-wide instruction word, which is the reason Flash is sized at 43K x 24 rather than 128K x 8. The 70 MIPS throughput is achieved while keeping dynamic current low because peripheral trigger generation (PTG) and DMA remove many interrupt-driven CPU tasks that would otherwise consume MIPS budget. Typical applications include industrial motor control, switch-mode power supplies (digital PFC), sensor signal conditioning with on-chip op-amps, capacitive touch user interfaces (CTMU), building automation, medical instrumentation front-ends, and general-purpose embedded control in white goods. The wide operating voltage range and integrated analog make it well-suited to mixed-signal designs that would otherwise require a separate op-amp or touch IC. Compared with a discrete MCU + external op-amp + touch controller, the PIC24EP128GP202 reduces BOM count, board area, and BOM risk. When designing with this device, pay attention to the QFN-S exposed pad: it must be soldered to a sufficiently large copper pour to keep junction temperature within the -40C to +85C industrial range. Decoupling should follow the manufacturer's reference design with a 100 nF plus 10 uF bulk capacitor near each VDD/VSS pair. Forgetting to solder the EP is a common field failure mode for QFN-based PIC MCUs. The "T" in the part number indicates Tape and Reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement the Microchip datasheet rather than restating it.

見積もり お問い合わせ
PIC24EP128GP202T-I/SS - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202T-I/SS

PIC24EP128GP202T-I/SS - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202T-I/SS is a high-performance 16-bit microcontroller from the PIC24EP "General Purpose" family, featuring the 70 MIPS dsPIC/PIC24E core, 128 KB of Flash program memory, 16 KB of SRAM, and 4 KB of EEPROM, all packaged in a 28-pin SSOP (5.30 mm body width, "T" suffix denotes tape-and-reel). A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, RAM, peripherals, and I/O into one package. The PIC24E architecture is a 16-bit modified-Harvard RISC core optimized for deterministic real-time control, sitting in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. The PIC24EP128GP202T belongs to the "Enhanced" PIC24E sub-family, which adds hardware Op-Amps, comparators, CTMU (Charge Time Measurement Unit), and the Peripheral Trigger Generator (PTG) for chained, autonomous peripheral sequencing. Key features of this part include 70 MIPS CPU performance at up to 60 MHz, a single 3.0 V-3.6 V supply, two on-chip operational amplifiers (usable for signal conditioning before the ADC), two analog comparators with programmable reference, a 10/12-bit ADC with up to 1 Msps, PWM modules, and the CTMU for capacitive touch or precise time measurement. The "GP" designation indicates general-purpose peripherals, while the "T" suffix is a packaging identifier for tape-and-reel supply. The "-I/SS" suffix indicates the industrial temperature grade (-40 °C to +85 °C) and the SSOP-28 package. Architecturally, the PIC24E core uses a 16-bit instruction word with 24-bit addresses, supporting a linear 24-bit program space and a 16-bit data path. The PTG allows up to 32-step trigger sequences that can drive ADC conversions, PWM updates, and other peripherals without CPU intervention, freeing the core for application logic. Combined with the integrated Op-Amps, designers can build closed-loop analog control systems using only the PIC24EP128GP202, no external analog front-end required. Typical applications include industrial motor control, sensor signal conditioning, LED lighting control, switched-mode power supply (SMPS) digital control, medical instrumentation, automotive body and accessory modules (industrial temperature range), and consumer appliances. The CTMU makes the part well suited for capacitive touch interfaces, while the Op-Amps and ADC enable direct interface to bridge sensors, thermocouples, and current shunts. When designing with this MCU, allocate pin budget carefully - SSOP-28 has only 28 pins, so the two Op-Amps and two comparators may share I/O with digital functions via PPS (Peripheral Pin Select). Use Microchip's MPLAB X IDE and XC16 compiler for firmware development; both are free and integrate with the PIC24E instruction set and DSP library. This page synthesizes current distributor pricing, drop-in same-package alternatives, application notes, and design guidance not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC24EP128GP204-E/MV - 16-Bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP204-E/MV

PIC24EP128GP204-E/MV - 16-Bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204-E/MV is a 16-bit MCU from the PIC24EP general-purpose family, integrating 128 KB of Flash program memory, 16 KB of RAM, and a high-speed 70 MIPS core in a 48-pin UQFN (MV) 6x6 mm exposed-pad package. It delivers up to 60 MIPS at 60 MHz CPU clock and is specified over the -40C to +125C extended automotive temperature range (E suffix), with AEC-Q100 qualification supporting automotive-grade designs. What is a PIC24EP microcontroller? The PIC24EP is a 16-bit Digital Signal Controller (DSC) family that sits in Microchip's PIC24E performance tier between the PIC24F baseline family and the dsPIC33 high-end DSC family. Architecturally it is a 16-bit RISC MCU (Harvard architecture) with DSP-class instructions, DMA, and rich analog peripherals, intended for applications needing more performance than PIC24F but not requiring dsPIC33 motor-control or audio codecs. Within the system hierarchy, PIC24EP belongs to: microcontroller -> embedded MCU -> 16-bit RISC/DSC -> PIC24E family -> general-purpose + advanced-analog segment. Key features include a 70 MIPS core, 128 KB Flash (43K x 24), 16 KB SRAM, multiple 16-bit timers, a 10/12-bit ADC with up to 1.1 Msps conversion rate, two internal operational amplifiers (the signature "GP204 with Op Amps" feature), two analog comparators, CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, a Peripheral Trigger Generator (PTG) for hardware-based state machines, and multiple communication peripherals (UART, SPI, I2C, ECAN). The 48-UQFN package with thermal pad supports up to 35 GPIO pins and integrates a high-speed PWM module. The PIC24EP architecture uses a modified Harvard bus with separate program and data paths and a hardware multiply/divide unit, enabling single-cycle MAC operations. The PTG peripheral can autonomously chain ADC conversions, PWM updates, and timer captures without CPU intervention, which offloads deterministic tasks from the core and reduces interrupt latency in motor control and power-conversion applications. Typical applications include automotive body electronics, industrial sensor conditioning (using on-chip op amps), capacitive touch interfaces (using CTMU), brushless DC motor drives, LED lighting controllers, and general-purpose 16-bit embedded controllers that need more analog integration than PIC24F can offer. The extended temperature grade and AEC-Q100 qualification make it well suited to under-hood and chassis subsystems. When designing with this part, carefully review the supply voltage range (typically 3.0 V to 3.6 V), use the exposed thermal pad with a properly sized copper pour for thermal relief, and follow Microchip's oscillator and decoupling recommendations in the family reference manual to achieve the rated 60 MIPS without EMI issues. This page synthesizes distributor pricing from DigiKey and Octopart, AEC-Q100-compliant drop-in alternatives, and application-engineering notes that supplement the manufacturer datasheet with practical selection guidance.

見積もり お問い合わせ
PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-E/PT

PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204-E/PT is a 16-bit microcontroller from the PIC24E general-purpose family, delivering up to 60 MIPS of performance from a 70 MIPS capable core, with 128 KB (43K x 24) of Flash program store and 16 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. The -E suffix indicates the extended industrial temperature grade, enabling operation from -40C to +125C for harsh-environment designs. The PIC24EP core integrates a rich analog and digital peripheral set including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile data), and a configurable set of peripherals on one die. The PIC24EP family sits within the 16-bit Digital Signal Controller (DSC) class, which adds hardware multiply, hardware divide, DSP-oriented instructions, and deterministic interrupt latency on top of standard MCU architecture. This category is best understood in the hierarchy: microcontroller -> 16-bit MCU/DSC -> PIC24E family -> power-managed general-purpose MCU with integrated op-amps. Key features include 60 MIPS core performance, 128 KB self-programmable Flash with ECC, 16 KB SRAM, a 10/12-bit ADC with up to 1 MSPS conversion rate, multiple UART/SPI/I2C interfaces, and four 16-bit timers. The integrated op-amps and comparators reduce external analog component count for signal conditioning, while the Peripheral Trigger Generator enables timed, low-CPU-overhead sequencing of ADC conversions and PWM edges. The CTMU supports capacitive touch sensing and precise time-of-flight measurement. Architecturally, the PIC24EP uses a modified Harvard architecture with separate buses for instruction and data fetch, a 24-bit instruction word, and a 16-bit data path. This combination yields high code density per MHz and deterministic interrupt response, while the on-chip op-amps are trimmed at factory test to reduce offset and drift. The device operates from 3.0V to 3.6V and includes multiple power-management modes for battery-friendly standby operation. Typical applications include industrial control, motor drive signal conditioning, power-conversion feedback loops, sensor interfaces, automotive body and sensor ECUs (when used as the non-automotive qualified sibling), and consumer appliances that benefit from integrated analog. The -E temperature grade broadens its reach to outdoor industrial, automotive cabin electronics, and lighting control. Design consideration: route the analog supply (AVDD) and ground (AVSS) with separate traces from their digital counterparts, place the 10 uF + 0.1 uF decoupling pair within 5 mm of VDD, and consult the family reference manual for PTG timing diagrams when chaining peripheral events. This page consolidates distributor pricing, drop-in package equivalents, and design guidance not available on the manufacturer's parametric summary page.

見積もり お問い合わせ
PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP204-E/TL

PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip PIC24EP128GP204-E/TL is a 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS high-performance core, 128 KB of Flash program memory, 16 KB of RAM, and a 44-pin VTLA (6x6 mm) exposed-pad surface-mount package. It operates from a 3.0V to 3.6V supply and is qualified to the AEC-Q100 automotive standard, making it suitable for safety-critical and harsh-environment designs. The -E temperature grade extends the operating range to -40C to +125C, supporting under-hood and industrial deployments. A 16-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (ADC, timers, communication interfaces) into a single chip. PIC24E-series MCUs occupy the mid-performance tier of Microchip's dsPIC/PIC24 lineup, sitting between 8-bit PIC MCUs and the higher-end dsPIC33 digital signal controllers, optimized for code density, deterministic interrupt response, and advanced analog integration. Key differentiating features include a 10/12-bit ADC with up to 1.1 Msps conversion rate, up to four on-chip operational amplifiers (Op Amps), a Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine automation, and four standard 16-bit timers. Communication peripherals cover up to two UART, two SPI, and two I2C interfaces, plus a Parallel Master Port for external memory expansion. Architecturally, the PIC24E core uses a modified Harvard architecture with 16-bit data paths, a 24-bit instruction word, and a 16x16 hardware multiplier that sustains the 70 MIPS throughput at 70 MHz CPU clock. The integrated Op Amps are routed to dedicated ADC channels, eliminating external signal conditioning in motor-control and sensor-interface designs. Typical uses include automotive body and chassis modules, industrial motor control, sensor signal conditioning, and low-cost DSP-adjacent applications such as digital filtering and PID control loops. Designers choose the -E/TL grade specifically when AEC-Q100 qualification and the compact VTLA-44 package are required for space-constrained or automotive-grade layouts. When designing with this device, allocate sufficient PCB copper beneath the exposed thermal pad (EP) to meet the package's thermal resistance specifications, and confirm the supply voltage stays within the 3.0V to 3.6V window; dropouts below 3.0V will trigger the brown-out reset. The Peripheral Trigger Generator (PTG) is often overlooked and can offload complex sequencing from the CPU, freeing MIPS for application logic. This page synthesizes distributor pricing for the PIC24EP128GP204-E/TL, parametric drop-in alternatives within the VTLA-44 footprint, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip
PIC24EP128GP204-H/ML

PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip

The Microchip PIC24EP128GP204-H/ML is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, 16 KB of SRAM, and integrated analog peripherals. It operates at up to 60 MHz (with 70 MIPS throughput) and is housed in a 44-pin VQFN (ML) package with exposed thermal pad. What is a PIC24EP microcontroller? The PIC24EP is Microchip's high-performance 16-bit DSC (Digital Signal Controller) family that combines MCU control capabilities with DSP-grade throughput. The 'EP' suffix denotes enhanced peripherals: dual 10/12-bit ADCs at up to 1.1 Msps, on-chip op-amps, CTMU (Charge Time Measurement Unit) for capacitive touch, a Peripheral Trigger Generator (PTG), and High-Speed PWM with 7 ns resolution. The PIC24EP sits above PIC24FJ in the taxonomy: PIC24EP128GP204 -> PIC24EP -> PIC24 -> 16-bit MCU -> microcontroller -> embedded IC -> semiconductor. Key features of this part include 70 MIPS core performance, 128 KB Flash (43K x 24 words), 16 KB SRAM, up to 35 analog-capable I/O pins, and an AEC-Q100 qualification for automotive applications. The '-H' suffix indicates the High-temperature automotive grade (-40C to +150C ambient), and '/ML' designates the 44-pin VQFN surface-mount package. Integrated peripherals include USB, CAN, and multiple UART/SPI/I2C interfaces. Technical depth: the dsPIC/PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path. The PTG sequencer offloads real-time tasks from the CPU, allowing deterministic peripheral chaining without interrupt overhead. Dual 10-bit ADCs sample at up to 1.1 Msps each, enabling simultaneous motor-current and back-EMF measurement for sensorless BLDC control. On-chip op-amps buffer analog signals before ADC conversion, eliminating external amplifier cost and noise pickup. Typical applications include automotive body electronics and sensor conditioning, BLDC/PMSM motor control, industrial PLC analog front-ends, capacitive touch HMI interfaces, and low-latency digital power conversion. The integrated PTG and op-amps allow fully-deterministic sensor acquisition loops without CPU intervention. Design consideration: the 44-pin VQFN exposed pad must be soldered to a sufficiently large copper pour (minimum ~1 sq inch) to keep junction temperature within the -40C to +150C automotive range under maximum CPU activity. This page synthesizes distributor pricing, drop-in Microchip alternates, and automotive-grade design considerations not collected on a single manufacturer page.

見積もり お問い合わせ
PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-I/PT

PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP204-I/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, and 16 KB of SRAM in a 44-pin TQFP (10x10 mm) package. The device integrates dual op-amps, advanced 10-bit ADC modules running up to 1.1 Msps, CTMU touch peripherals, and a Peripheral Trigger Generator (PTG) for hardware state-machine I/O control. Operating from 3.0V to 3.6V with an industrial -40C to +85C temperature range, it targets high-end general-purpose embedded designs that need DSP-class throughput on a single 3.3V rail. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals (ADC, timers, communication, I/O) on a single silicon die. In the system hierarchy it sits below power management ICs and above discrete logic: a complete embedded design typically pairs an MCU with an LDO, a crystal oscillator, and driver ICs. The PIC24E family specifically occupies the mid-performance tier within Microchip's 16-bit MCU roadmap - more capable than PIC24F but below the dsPIC33 DSC family - making it a workhorse for motor control, digital power, and signal-conditioning applications. Key features include 128 KB Flash (43K x 24 words), 16 KB SRAM, 70 MIPS CPU throughput at 60 MHz (Fosc = 240 MHz with PLL), four UART/SPI/I2C modules, two I2C modules, five 16-bit timers, and 35 digital I/O pins. The integrated op-amps can be used for active signal conditioning ahead of the ADC, eliminating external analog components. The CTMU enables capacitive touch sensing and precise time-based current measurement. Architecturally, the PIC24E uses a 16-bit modified Harvard core with a 24-bit instruction word for improved code density, 31 working registers, and a hardware multiplier/DIV unit. The 70 MIPS sustained throughput is competitive with Cortex-M3 devices in its class while offering Microchip's mature MPLAB X toolchain ecosystem and DSP library support. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital switching power conversion (digital PFC, LLC controllers), sensor signal conditioning, LED lighting controllers, and medical instrumentation front-ends. The PTG peripheral is particularly valued in multi-loop digital power supplies where deterministic hardware sequencing reduces firmware overhead. When designing with this part, allow at least 1 square inch of ground plane under the TQFP for thermal dissipation, and route the analog AVss/AVdd pair as a star away from noisy digital returns. The 44-pin TQFP leaves most peripherals accessible without pin-sharing tradeoffs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/ML

PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/ML is a high-performance 16-bit microcontroller from the PIC® 24EP family, featuring a 60 MIPS PIC Harvard core, 128 KB (43K x 24) of Flash program memory and a 44-pin QFN EP (8x8 mm) exposed-pad package with automotive AEC-Q100 qualification. Operating from a 3.0 V to 3.6 V supply, it integrates a Peripheral Trigger Generator (PTG), Charge Time Measurement Unit (CTMU), on-chip op-amps, and a 10/12-bit ADC with superior analog performance for mixed-signal designs. A PIC24E 16-bit microcontroller is a member of Microchip's enhanced PIC24 family, which sits above the PIC16 and PIC18 8-bit lines and below the dsPIC33/PIC32 MIPS-class devices in the broader Microchip MCU hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU). The 'EP' suffix designates the high-speed 70 MIPS-capable core variant with DSP instructions, advanced peripherals, and extended memory addressing, while the 'T-E/ML' suffix indicates tape-and-reel packaging, the extended (-40C to +125C) automotive temperature grade, and the 44-pin QFN package. Key features of the PIC24EP128GP204T-E/ML include up to 60 MIPS core throughput, 128 KB self-programmable Flash with ECC, 8 KB SRAM, 4 KB EEPROM (family-typical), multiple communication peripherals (I2C, SPI, UART with IrDA/LINbus support), and a high-resolution PWM module. The CTMU enables capacitive touch sensing and precise time measurement, while the integrated op-amps simplify analog front-end designs and reduce BOM count. Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware multiply/divide engine, and tightly-coupled peripheral trigger logic (PTG) that allows peripherals to chain events without CPU intervention, freeing the core for application-level processing. This combination is well suited to closed-loop control, motor drive, and high-end general-purpose embedded designs. Typical applications include automotive body electronics, industrial motor control, digital power conversion, capacitive touch HMIs, sensor signal conditioning, and high-performance sensor hubs. The AEC-Q100 qualification makes it attractive for under-hood and body-control ECUs. A primary design consideration when using this device is the 3.3 V-only supply range, which requires level shifting when interfacing to 5 V peripherals. Additionally, the 44-QFN exposed-pad must be soldered to a sufficient copper pour on the PCB for thermal dissipation and electrical grounding. This page synthesizes distributor pricing, drop-in alternative listings and practical design notes drawn from Microchip documentation and authorized distributor data, offering engineers a single-source reference not available in the bare datasheet.

見積もり お問い合わせ
PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip
PIC24EP128GP204T-E/PT

PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204T-E/PT is a 16-bit PIC microcontroller from the PIC24E general-purpose family, operating at up to 60 MIPS core speed and housed in a 44-pin TQFP (10x10 mm) package. The device integrates 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, with on-chip peripherals including high-speed PWM, operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). What is a PIC24E MCU? The PIC24E is Microchip's high-performance 16-bit dsPIC/PIC24 microcontroller family built on a modified Harvard architecture. It sits within the broader taxonomy of MCU -> 16-bit MCU -> PIC24 family -> general-purpose MCU with DSP extensions. These MCUs combine deterministic interrupt response with enhanced arithmetic capability for motor control, power conversion, and signal processing. Key features include 60 MIPS performance from a 3.0V to 3.6V supply, AEC-Q100 automotive qualification, and rich connectivity through I2C, SPI, UART/USART, IrDA, and LINbus interfaces. The T suffix in the part number indicates tape-and-reel packaging, while the E grade indicates the -40C to +125C extended automotive temperature range. The PTG peripheral enables complex timing and sequencing without CPU intervention. Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning with on-chip op-amps, LED lighting controllers, and consumer appliances requiring robust connectivity. The high-speed 10/12-bit ADC and op-amp integration make the PIC24EP128GP204 well-suited for closed-loop analog control. When designing with this part, ensure your compiler is configured for the PIC24E instruction set and that the ICD 3 / ICD 4 / PICkit 4 debugger is selected. Verify the supply decoupling network meets the 100 nF + bulk capacitor recommendation in the datasheet. This page synthesizes distributor pricing, AEC-Q100 cross-brand drop-in alternatives, and practical design notes not found on stock product listings.

見積もり お問い合わせ
PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/TL

PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, delivering up to 70 MIPS of CPU performance from a high-speed modified Harvard architecture core. The device integrates 128 KB of Flash program memory (43K x 24 words) and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad. It operates across the 3.0V to 3.6V industrial supply range at temperatures from -40C to +125C and is AEC-Q100 qualified for harsh-environment and automotive applications. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device with a 16-bit data path, 16-bit-wide registers, and a unified address space that gives it a middle position between 8-bit MCUs (lower cost, simpler peripherals) and 32-bit MCUs (higher performance, richer ecosystems). In the broader taxonomy, the PIC24EP128GP204T-E/TL belongs to microcontroller -> 16-bit MCU -> PIC24E family -> DSP-enhanced general-purpose MCU -> Microchip's dsPIC/PIC24 line of embedded controllers. Key differentiating features include a 12-bit ADC with up to 1 Msps conversion rate, two on-chip operational amplifiers (suitable for signal conditioning), a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Peripheral Trigger Generator (PTG) that orchestrates complex peripheral sequencing without CPU intervention. The PTG is uncommon in 16-bit MCUs and lets hardware timers trigger ADC conversions, PWM updates, and GPIO events deterministically. The architecture exposes a 16-element DSP engine, dual-port RAM-style working registers, and a hardware multiplier, supporting single-cycle MAC operations. The result is 70 MIPS with deterministic interrupt latency suitable for digital filtering, motor commutation, and power-conversion control loops. Typical applications include automotive body and chassis ECUs, industrial sensor conditioning with on-chip op-amps, BLDC/PMSM motor control, LED lighting drivers with closed-loop current sensing, and AEC-Q100-grade safety peripherals. The on-chip op-amps eliminate external instrumentation stages for thermocouple, photodiode, and current-shunt circuits. When designing with this part, note that the VTLA-44 (6x6 mm) package has a small thermal pad that must be soldered to a PCB copper pour for thermal and electrical performance. Code development is supported by MPLAB X IDE and the XC16 compiler, with extensive peripheral libraries. This page synthesizes verified distributor pricing, AEC-Q100 cross-brand drop-in alternatives in the same VTLA-44 package, and design notes that go beyond the manufacturer datasheet.

見積もり お問い合わせ
PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip
PIC24EP128GP204T-I/ML

PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip

The Microchip Technology PIC24EP128GP204T-I/ML is a 16-bit microcontroller from the PIC24EP family, integrating a high-performance 70 MIPS dsPIC33/PIC24E core with 128 KB Flash program memory and 16 KB RAM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The “T” suffix denotes tape-and-reel packaging and the “I” suffix specifies the industrial -40C to +85C temperature range; the “/ML” suffix identifies the 44-QFN package. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO). The PIC24EP family sits in Microchip’s high-performance 16-bit MCU tier, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/dsPIC33 family. The PIC24E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction set, optimized for both C code density and deterministic real-time DSP-style signal processing. Key features include 128 KB (43K x 24 instructions) Flash with self-programming, 16 KB SRAM, up to 35 I/O, two 12-bit ADCs with 500 ksps performance (shared 10-channel input mux), three op-amps, one CTMU (Charge Time Measurement Unit) for capacitive touch or precise time measurement, and one PTG (Peripheral Trigger Generator) that offloads complex timing sequences from the CPU. Communication peripherals include up to two UART, two SPI, and one I2C. The peripheral set is tailored to mixed-signal and motor-control front ends. Architecturally, the PIC24E core delivers 70 MIPS at 70 MHz CPU clock from a 3.0-3.6 V supply, with a hardware multiplier and zero-overhead looping for high-throughput DSP-like math. The dual 12-bit ADC and integrated op-amps remove the need for external signal-conditioning ICs in many sensor and motor-control designs, while the CTMU/PTG combination enables precise event sequencing. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion, advanced sensor signal conditioning, capacitive-touch user interfaces, and general-purpose embedded control with on-chip analog. The wide operating voltage (3.0-3.6 V) and industrial temperature range suit industrial, appliance, and consumer embedded designs. When designing with the PIC24EP128GP204T-I/ML, ensure the exposed thermal pad (EP) is soldered to a continuous ground copper pour for both thermal dissipation and low-impedance ground return. Decouple VDD/AVDD pairs with 0.1 uF and 1 uF ceramics placed within 5 mm of the pins, and reserve one GPIO for an SWD/ICSP programming header (PGECx/PGEDx). This page synthesizes distributor pricing, drop-in alternatives drawn from the Microchip same-family portfolio, and practical design notes not found on standard distributor listings.

見積もり お問い合わせ
PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-I/TL

PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-I/TL is a 16-bit PIC microcontroller from the PIC24EP "Enhanced Performance" family, delivering up to 70 MIPS core performance with 128 KB of Flash and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. The PIC24EP "GP" general-purpose sub-family integrates advanced analog peripherals including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for hardware-state-machine automation. A 16-bit microcontroller (MCU) is a microprocessor with internal Flash, RAM, and peripherals optimized for embedded control. The PIC24EP family sits within Microchip's dsPIC/PIC24 product hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> PIC24EP "Enhanced Performance" sub-family -> general-purpose (GP) class. This taxonomy places the PIC24EP128GP204 as a mid-range 16-bit MCU with high analog integration, sitting between cost-optimized PIC24FJ parts and the high-performance dsPIC33EP digital signal controllers. Key differentiating specifications include 70 MIPS CPU throughput (4.7 µs instruction cycle latency for fast deterministic control loops), 128 KB self-programmable Flash with EEPROM emulation, 16 KB SRAM, dual 10-bit DACs, three op-amps internal to the die, four analog comparators, and a 12-bit ADC with up to 500 ksps conversion rate. The CTMU enables capacitive touch sensing and precision time measurement down to nanosecond resolution. Architecturally, the PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, enabling C-compiler-friendly operation with the MPLAB XC16 toolchain. The integrated PTG module allows complex peripheral sequencing without CPU intervention, reducing firmware complexity for motor control and power-conversion feedback loops. The on-chip op-amps and comparators can directly condition sensor signals before ADC digitization, eliminating external signal-conditioning components in many designs. Typical applications include industrial motor control (BLDC, PMSM, stepper drives), digital power conversion (PFC, LLC, full-bridge converters), high-end LED lighting drivers, capacitive-touch user interfaces, sensor conditioning for IoT edge nodes, and medical instrumentation requiring precision analog front ends. The wide operating temperature range (-40 °C to +85 °C industrial grade) and 3.3 V single-supply operation make the part well suited for industrial 24V-bus-derived power architectures. Design consideration: the VTLA-44 (6x6 mm) package has an exposed thermal pad that must be soldered to a copper pour on the PCB (minimum 1 square inch recommended) for thermal dissipation and electrical grounding. Decoupling requires at minimum one 100 nF X7R capacitor within 3 mm of each VDD/AVDD pin pair. For applications requiring >40 MIPS sustained throughput, ensure code execution stays within Flash wait-state timing by referencing the MPLAB XC16 compiler optimization settings. This page synthesizes distributor pricing, drop-in Microchip family alternatives, and practical design notes not found in the bare manufacturer datasheet, enabling faster component selection and BOM risk mitigation for engineers evaluating the PIC24EP128GP204T-I/TL for new designs.

見積もり お問い合わせ
PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip
PIC24EP128GP206-E/MR

PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip

The Microchip Technology PIC24EP128GP206-E/MR is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring 128KB of Flash program memory, 16KB of RAM, and a 60 MIPS (70 MHz) high-performance CPU core with DSP instructions, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and programmable peripherals on one die. Within the broader taxonomy, MCUs belong to the class of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC24E/PIC24EP family sits between 8-bit PIC MCUs and the 32-bit PIC32MX/ARM Cortex-M devices in Microchip's portfolio, and is intended for high-end general-purpose applications that need DSP-class signal-processing throughput without paying for a 32-bit core. The "EP" enhancement adds 70 MIPS core speed, a 12-bit ADC with up to 16 channels, op-amps, comparators, CTMU, and the Peripheral Trigger Generator (PTG) for hardware event sequencing. Key features include a 16-bit modified Harvard architecture with a 16x16 hardware multiplier, 32-bit accumulator, and single-cycle MAC operation; up to 53 general-purpose I/O pins; multiple communication peripherals (UART, SPI, I2C, ECAN); and 5 PWM output channels with 16-bit resolution. The 12-bit 1.1 MSPS ADC with up to 16 analog inputs supports precision mixed-signal designs, while four on-chip op-amps and three comparators enable direct sensor signal conditioning. The device is fabricated on a CMOS process that delivers 70 MIPS at 3.3 V while preserving deterministic interrupt latency suitable for real-time control loops. The integrated PTG timer chain allows peripherals to trigger each other in hardware, offloading CPU cycles in motor-control and power-conversion firmware. The dual-watchdog timer and code protection further harden the design for unattended industrial deployments. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion (DC-DC, PFC, LLC), advanced sensor conditioning, solar inverters, LED lighting controllers, and AEC-Q100 automotive body/comfort modules. The wide operating temperature range of -40C to +125C (E suffix) supports both industrial and automotive under-hood environments. When designing with this part, ensure the ICSP programming header is accessible on the PCB because the exposed thermal pad (EP) under the 64-VQFN must be soldered to a sufficient copper pour to meet the 31 C/W theta_JA thermal budget at full CPU load. This page synthesizes distributor stock and lead-time, drop-in alternative candidates from the same PIC24EP family and cross-brand 32-bit MCU equivalents, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip
PIC24EP128GP206-H/MR

PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip

The Microchip Technology PIC24EP128GP206-H/MR is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS core performance with 128 KB of Flash program memory and housed in a 64-pin VQFN (MR) package. It features the dsPIC/PIC24E enhanced CPU core with excellent performance and code density, plus 16 KB of on-chip RAM, a 12-bit ADC with up to 1.1 Msps conversion rate, and advanced analog peripherals including on-chip op-amps and a Charge Time Measurement Unit (CTMU). What is a PIC24E general-purpose microcontroller? The PIC24E family sits in the 16-bit MCU segment of Microchip's product hierarchy (16-bit MCU -> microcontroller -> embedded computing -> semiconductor), offering a 16-bit modified Harvard architecture with DSP-oriented instructions. The 'E' series pushes performance to 70 MIPS (versus 16 MIPS on the older PIC24F), while preserving the deterministic interrupt model and rich peripheral set that makes PIC microcontrollers a workhorse for real-time embedded designs. The /MR suffix indicates a 64-pin VQFN package, the /H suffix denotes an extended temperature grade (-40C to +150C), and the -GP variant targets general-purpose applications without on-chip DSC (digital signal controller) features. Key features of the PIC24EP128GP206-H/MR include a 70 MIPS CPU core with single-cycle 16x16 MAC, dual 36/40/48 KB Flash options in the family, 10-bit/12-bit ADC with multiple conversion modes, up to 53 general-purpose I/O pins, multiple communication peripherals (UART, SPI, I2C), enhanced PWM with up to 9 channels, Peripheral Trigger Generator (PTG) for complex timing, and a CTMU for capacitive touch and time measurement. The 64-pin VQFN package provides a compact 9x9 mm footprint with an exposed thermal pad that lowers thermal resistance for high-MIPS continuous operation. Typical applications include industrial motor control and variable-frequency drives, advanced sensor signal conditioning, LED lighting controllers, UPS and power conversion, automotive body and chassis subsystems (with proper qualification), digital power conversion, and high-performance consumer appliances. The 70 MIPS performance and DSP instructions also support audio processing and real-time control loops where deterministic execution is critical. When designing with the PIC24EP128GP206-H/MR, observe the -40C to +150C extended operating temperature, which requires PCB layout that ensures the exposed pad is soldered for proper heat dissipation. The device supports 3.0V to 3.6V single-supply operation; pair the MCU with a low-noise LDO such as the MCP1700 or TPS7A4700 family and decouple every VDD/AVDD pair with 100 nF ceramic capacitors placed within 3 mm of the pins. The H/MR suffix combination indicates a specialized extended-temperature part; verify lead time through authorized distributors before committing to production schedules.

見積もり お問い合わせ