集積回路

サブカテゴリ

📁 ADC/DAC 2520 製品 📁 アンプIC 799 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 310 製品 📁 DSP 963 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1600 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18750 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32851)

PIC24F16KA102-E/SS - 16-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip
PIC24F16KA102-E/SS

PIC24F16KA102-E/SS - 16-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip

Microchip PIC24F16KA102-E/SS is a 16-bit Flash microcontroller from the PIC24F KA family, featuring 16 KB (5.5K x 24) of program memory, 1.5 KB RAM, and 512 B EEPROM, housed in a 28-pin SSOP package with a 32 MHz maximum operating frequency (16 MIPS). The -E/SS suffix indicates the extended industrial temperature grade (-40C to +125C) and the SSOP-28 surface-mount package with 0.65 mm pitch. It is one of the smallest PIC24F devices combining eXtreme Low Power (XLP) nanoWatt technology with up to 18 general-purpose I/O pins. A PIC microcontroller (Microcontroller Unit, MCU) is a single integrated circuit that contains a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and a wide range of on-chip peripherals such as timers, ADC, communication interfaces, and I/O ports. The PIC24F sub-family uses Microchip's 16-bit modified Harvard architecture with a 16-bit data path and 24-bit instruction wordwidth, positioned between the 8-bit PIC16/PIC18 families and the high-performance dsPIC/PIC32 lines. Within the power-management hierarchy, XLP nanoWatt MCUs target battery-powered and energy-harvesting applications where deep sleep current (in nanoamps) and fast wake-up time dominate the design envelope. Key features include deep sleep mode with DSBOR and DSWDT supervision, RTCC with on-chip calibration for real-time clock operation without a crystal, a 9-channel 10-bit ADC, two analog comparators, up to three UART/SPI/I2C peripherals, and five 16-bit timers. Sleep currents are typically under 50 nA in deep sleep with full RAM retention, allowing years of operation from a CR2032 coin cell. The internal 8 MHz oscillator is factory-calibrated to within 2% across the full temperature range, eliminating the external crystal on many designs. The PIC24F16KA102-E/SS combines ultra-low-power nanoWatt XLP technology with a 16 MIPS CPU core and 16 KB self-programmable Flash. The peripheral set is shared across the entire PIC24F16KA1xx family (PIC24F08KA101, PIC24F16KA101, PIC24F08KA102, PIC24F16KA102), so code developed on the 28-pin SSOP version is portable to 20-pin variants in the same family. Code-protect and ICSP (In-Circuit Serial Programming) are supported over the standard two-wire PGx/PGx interface. Typical applications include battery-powered sensors, wearable health monitors, remote controls, energy-harvesting devices, low-cost consumer products, and industrial sensor nodes. The wide 1.8 V to 3.6 V operating range suits single-cell lithium coin-cell designs as well as 2x AA alkaline systems. The internal oscillator and 5-channel hardware PWM make the part a good fit for direct LED-driving or low-end motor-control tasks. When designing with this part, enable the DSBOR and DSWDT deep-sleep supervisors if the application may experience brown-out conditions or firmware lock-up during long unattended battery operation. Pin-out usage of the MCLR pin is mandatory as a programming/debug entry point; leave it accessible in the PCB layout even if no external reset is wired. This page synthesizes Microchip datasheet specifications, distributor pricing as of 2026-09-29, same-package drop-in Microchip alternatives, and practical low-power design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24F16KA102-I/ML - 16KB Flash XLP 16-bit MCU | Microchip
PIC24F16KA102-I/ML

PIC24F16KA102-I/ML - 16KB Flash XLP 16-bit MCU | Microchip

The Microchip Technology PIC24F16KA102-I/ML is a 16-bit PIC24F microcontroller featuring nanoWatt XLP (eXtreme Low Power) technology, operating up to 32 MHz with 16 MIPS performance at 3.3V, housed in a 28-pin QFN (6x6) package. It integrates 16 KB (5.5K x 24) of Flash program memory, 1.5 KB of RAM, and 512 bytes of EEPROM, with 18 general-purpose I/O pins. A 16-bit microcontroller (MCU) is a microprocessor with a 16-bit data path, register width, and ALU. Within the semiconductor hierarchy, MCUs sit under microcontrollers -> embedded processors -> digital ICs. The PIC24F family targets ultra-low-power embedded applications where longer battery life and reduced energy budget dominate the design trade-off. The XLP technology stack adds deep-sleep peripherals such as DSBOR (deep-sleep brown-out reset), DSWDT (deep-sleep watchdog timer) and a retentive RTCC that maintains timekeeping while the core is asleep, enabling years of operation from a single coin cell. Key features include a 16-channel 10-bit ADC, two analog comparators, four 16-bit timers, two UART, two SPI, two I2C, five CCP/SCCP modules configurable for PWM/capture/compare, real-time clock and calendar with alarm, and a charge time measurement unit (CTMU) for capacitive touch. The 32 MHz internal oscillator removes the external crystal on cost-sensitive boards, while the 28-QFN (6x6) exposed-pad package gives a typical thermal resistance of about 32 C/W for thermally constrained designs. Internally the PIC24F16KA102 uses a 16-bit modified Harvard RISC core with single-cycle multiply, hardware stack, deterministic interrupt latency and a wide (3.0 V to 3.6 V) VDD range. The integrated 16 MIPS DSP engine plus zero-overhead loop control allows sensor-fusion math and digital-filter loops in firmware without an extra DSP chip. Typical applications include battery-powered IoT nodes, wearables, e-metering, sensor hubs, remote controls, low-power wireless peripherals (sensor-side companion MCU), capacitive-touch user interfaces, and medical monitoring handhelds. Designers should evaluate sleep-mode current (deep sleep as low as tens of nA) and active current per MHz when comparing against newer Cortex-M0+ alternatives; PIC24F16KA102 is most attractive when the design needs low BOM cost, on-chip EEPROM and Microchip's MPLAB X toolchain.

見積もり お問い合わせ
PIC24F16KA102-I/SO - 16KB Flash XLP 16-bit MCU 28-SOIC | Microchip
PIC24F16KA102-I/SO

PIC24F16KA102-I/SO - 16KB Flash XLP 16-bit MCU 28-SOIC | Microchip

The Microchip Technology PIC24F16KA102-I/SO is a 16-bit microcontroller from the PIC24F XLP (eXtreme Low Power) family, featuring 16 KB of Flash program memory, 2 KB of RAM, and 512 bytes of EEPROM, operating at up to 32 MHz (16 MIPS at 3.3 V) in a 28-pin SOIC wide-body package. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), non-volatile EEPROM, and configurable peripherals (timers, ADC, communication interfaces). The PIC24F16KA family belongs to the broader category of mixed-signal microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. The 16-bit modified-Harvard RISC architecture delivers deterministic interrupt latency and rich peripheral integration for embedded designs. Key features include the nanoWatt XLP technology for industry-leading low-power operation with multiple deep-sleep modes (DSBOR, DSWDT, Deep Sleep), Real-Time Clock and Calendar (RTCC) with VBAT retention, an integrated 10-bit ADC with up to 9 channels, multiple Enhanced Capture/Compare/PWM (ECCP) modules, and configurable peripherals including UART, I2C, and SPI. The 28-SOIC package exposes 19 general-purpose I/O pins and supports In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) for development workflows. Technically, the device operates from 1.8 V to 3.6 V across an industrial temperature range of -40 °C to +85 °C, with hardware multiplier, 16 x 16-bit working register array, and selectable internal/external oscillator topologies. The integrated brown-out reset (BOR), watchdog timer (WDT), and dual oscillator fail-safe clock monitor add reliability to safety-conscious applications. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote controls, energy-harvesting devices, low-power wireless sensor nodes, and industrial metering. The XLP features allow standby currents in the nanoampere range, enabling multi-year battery life on a single coin cell. When designing with this MCU, use Microchip's MPLAB X IDE with the XC16 compiler for firmware development. Decouple VDD with at least a 100 nF ceramic capacitor placed close to the pins, and route the ICSP/PGD/PGC lines with short traces to programming header pads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24F16KA102-I/SS - 16-bit XLP MCU 16KB Flash 28-SSOP | Microchip
PIC24F16KA102-I/SS

PIC24F16KA102-I/SS - 16-bit XLP MCU 16KB Flash 28-SSOP | Microchip

The Microchip Technology PIC24F16KA102-I/SS is a 16-bit PIC microcontroller featuring nanoWatt XLP (eXtreme Low Power) technology, 16KB Flash program memory, 2KB RAM, and 512B EEPROM in a 28-pin SSOP package. The device operates from 1.8V to 3.6V with a 32MHz internal oscillator delivering up to 16 MIPS performance, targeting power-constrained and battery-powered embedded applications. The -I temperature grade supports -40C to +85C operation, suitable for industrial-grade designs. A PIC24 microcontroller is a 16-bit modified Harvard architecture MCU from Microchip's PIC24F family, sitting between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX devices in the product hierarchy. PIC24F devices use a wide 16-bit instruction set with DSP-friendly instructions, hardware multiply/divide, and a peripheral set oriented toward motor control and low-power sensing. The 'F' suffix denotes Flash program memory and 3.3V-class operation. The XLP technology adds deep-sleep current as low as 20 nA with retention, plus peripherals like DSBOR (deep-sleep brown-out reset), DSWDT (deep-sleep watchdog timer), and RTCC (real-time clock calendar) that remain active in sleep. Key features of this part include the 16KB (5.5K x 24) Flash program memory, 19 GPIO pins with remappable peripherals (PPS), 12-bit ADC with up to 9 channels, multiple UART/SPI/I2C interfaces, 5 16-bit timers, and a real-time clock calendar. The XLP deep-sleep current is typically under 20 nA with full SRAM retention, while run current at 32MHz/3.3V is around 8 mA. The 28-SSOP footprint has a thermal resistance of approximately 71 C/W and supports hand-soldering plus standard reflow profiles. The architecture uses a modified Harvard bus with separate program and data paths, a 24-bit instruction word, and a 16-bit data path. The MIPS-style instruction set executes most instructions in one cycle. Integrated peripherals like comparators, 10-bit DAC, and CTMU (Charge Time Measurement Unit) enable touch sensing and slope-compensation without external ICs. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote controls, wireless metering, HVAC thermostats, and energy harvesting systems where sleep current dominates battery life. The 28-SSOP package allows breadboard-friendly hand assembly while remaining suitable for automated SMT lines. The wide operating voltage also enables direct Li-ion battery connection at 3.6V maximum. When designing with this MCU, prioritize the deep-sleep current budget over active performance; the XLP features only deliver their value when peripherals are properly switched off and unused clocks are gated. Use the PPS peripheral remapping to route signals to any GPIO, simplifying PCB layout. Always confirm that the active peripherals draw less than the wake-up event cost in duty-cycled applications. This page synthesizes Microchip datasheet values, current distributor pricing, and drop-in alternatives to the 28-SSOP footprint, information typically scattered across the datasheet, parametric tables, and XAIPART cross-reference data.

見積もり お問い合わせ
PIC24F16KA102T-I/ML - 16-bit XLP MCU, 16KB Flash, 28-QFN | Microchip
PIC24F16KA102T-I/ML

PIC24F16KA102T-I/ML - 16-bit XLP MCU, 16KB Flash, 28-QFN | Microchip

The Microchip Technology PIC24F16KA102T-I/ML is a 16-bit PIC microcontroller from the PIC24F XLP (eXtreme Low Power) family, delivering 16 MIPS performance at 32 MHz with 16 KB flash, 2 KB RAM, and 512 B EEPROM in a 28-pin QFN (6x6 mm) package. It features a wide operating voltage range of 1.8 V to 3.6 V and is qualified for automotive AEC-Q100 applications. A PIC24F microcontroller is a 16-bit modified Harvard architecture MCU from Microchip's PIC family, optimized for ultra-low power and mixed-signal embedded applications. It sits in the broader taxonomy of microcontroller -> embedded processor -> semiconductor, offering higher performance and richer peripherals than 8-bit PIC MCUs while consuming less power than dsPIC and PIC32 devices, making it well-suited to battery-powered and energy-harvesting designs. Key features include 16 MIPS throughput at 32 MHz, nanoWatt XLP technology with deep-sleep current below 1 µA, and rich peripherals such as a 10-bit ADC, multiple UART/SPI/I2C interfaces, comparators, RTCC with calendar mode, and configurable logic cells. The 28-QFN package exposes the die thermal pad for enhanced heat dissipation and offers 18 digital I/O pins. Architecturally, the device uses a 16-bit modified Harvard core with separate program and data buses, hardware multiply/divide, and a configurable instruction set compatible with PIC24F assembly and MPLAB XC16 C code. The XLP power management block integrates DSBOR (deep-sleep brown-out reset), DSWDT (deep-sleep watchdog timer), and a real-time clock calendar, enabling sleep currents measured in nanoamps while keeping time and wake-up sources active. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, automotive body controllers, energy meters, RF4CE remote controls, and ultra-low-power wireless sensor platforms. The combination of nanoWatt XLP sleep modes, RTCC retention, and AEC-Q100 qualification makes it suitable for designs that must run for years on a coin cell or that must operate reliably under automotive temperature stress. When designing with this device, pay attention to decoupling: place 100 nF + 1 µF ceramics close to VDD/AVDD pairs and use the exposed pad (EP) for low-impedance ground and thermal relief. Programming is supported by MPLAB X IDE with the XC16 compiler, and debug is handled via the ICSP/ICD interface using PGECx/PGEDx pins. This page consolidates distributor pricing, drop-in alternatives, and engineering guidance not collated in the manufacturer datasheet.

見積もり お問い合わせ
PIC24F16KA102T-I/SO - 16KB Flash XLP 16-bit MCU | Microchip
PIC24F16KA102T-I/SO

PIC24F16KA102T-I/SO - 16KB Flash XLP 16-bit MCU | Microchip

The Microchip Technology PIC24F16KA102T-I/SO is a 16-bit PIC24F microcontroller with nanoWatt XLP (eXtreme Low Power) technology, delivering 16 MIPS performance at 32 MHz core clock while consuming only nanoamp-level sleep currents. It integrates 16 KB of Flash program memory (5.5K x 24 instruction words), 1.5 KB of RAM, and 512 bytes of EEPROM in a 28-pin SOIC (SO) wide-body package qualified for the -40C to +85C industrial temperature range. What is a 16-bit microcontroller? A 16-bit MCU is a microcontroller with a 16-bit-wide data path, register file, and ALU, sitting between 8-bit MCUs (lower performance, lower cost) and 32-bit MCUs (higher performance, higher cost and power). Within Microchip's taxonomy the PIC24F family belongs to the broader PIC microcontroller family and to the dsPIC/DSC and MCU category, distinguished by nanoWatt XLP technology that enables deep-sleep currents below 1 uA, making PIC24F devices the typical choice for battery-powered and energy-harvesting applications. Key features include up to 18 general-purpose I/O, 12-bit ADC with 9 analog channels, multiple 16-bit and 32-bit timers, a Real-Time Clock Calendar (RTCC) with dedicated 32 kHz domain, deep-sleep brown-out reset (DSBOR), deep-sleep watchdog timer (DSWDT), and ultra-low-power wake sources. The device supports 1.8V to 3.6V operation from a single supply, internal 8 MHz and 32 kHz oscillators, and a rich set of serial peripherals including UART, SPI, and I2C. Architecturally the PIC24F16KA102 employs a modified Harvard RISC core with a 24-bit instruction word and 16-bit data path, paired with a wide peripheral set optimized for low duty-cycle applications. The XLP technology combines multiple low-power modes (Sleep, Deep Sleep, Retention) with peripheral event-based wake-up to keep average current consumption in the microamp range. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote control key fobs, smart meters, energy harvesting nodes, and industrial data loggers where multi-year battery life is required. The 28-SOIC footprint also supports hand-soldered prototypes and low-volume production. When designing with this part, plan for the -40C to +85C industrial temperature range and ensure the supply decoupling network is placed within 5 mm of the VDDCORE and VDD pins. The 'T' suffix indicates tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet.

見積もり お問い合わせ
PIC24F16KA301-E/P - 16-bit XLP MCU 32MHz 16KB Flash | Microchip
PIC24F16KA301-E/P

PIC24F16KA301-E/P - 16-bit XLP MCU 32MHz 16KB Flash | Microchip

The Microchip Technology PIC24F16KA301-E/P is a 16-bit eXtreme Low Power (XLP) flash microcontroller in a 20-pin PDIP package, delivering 32 MIPS performance at 32 MHz, 16 KB flash program memory (5.5K x 24), 2 KB RAM, and 512 B EEPROM, with a 12-bit ADC and on-chip CTMU peripheral. According to the Microchip datasheet, this part targets power-constrained and battery-powered designs, achieving industry-leading low-power figures through Deep-Sleep-aware peripherals such as DSBOR (Deep Sleep Brown-Out Reset), DSWDT (Deep Sleep Watchdog Timer), and RTCC (Real-Time Clock Calendar) that continue operating in Deep Sleep mode. A 16-bit microcontroller (MCU) is a microprocessor that fetches, decodes, and executes 16-bit-wide instructions, offering a richer instruction set, more deterministic interrupt latency, and better code density than typical 8-bit cores. The PIC24F sits in Microchip's broader MCU taxonomy as PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24F family specifically emphasizes ultra-low power (XLP) operation, while PIC24EP and dsPIC33 families scale up performance or add DSP capability. The PIC24F16KA301-E/P exposes 18 general-purpose I/O pins and integrates a 12-bit A/D converter with CTMU for capacitive touch and time measurement, two analog comparators, an internal oscillator, and multiple serial interfaces (UART, SPI, I2C). The -E temperature grade denotes -40C to +125C operation, making this part suitable for industrial and harsh-environment deployments rather than consumer-grade 0 to +70C ranges. The 20-pin PDIP (0.300 inch) form factor is the through-hole variant preferred for prototyping, breadboarding, and legacy through-hole designs. Architecturally, the PIC24F core uses a modified Harvard architecture with separate program and data paths, supporting C-compiled firmware (MPLAB XC16) and the entire MPLAB ecosystem. The XLP technology incorporates nanoWatt XLP features including multiple idle and Sleep modes with wake-on-interrupt, retention of RAM in Deep Sleep, and ultra-low run currents suitable for coin-cell and energy-harvesting applications. Typical applications include battery-powered sensor nodes, IoT edge devices, portable medical instruments, smart metering, HVAC controllers, and any low-duty-cycle embedded system where Deep Sleep current matters more than peak MIPS. The -E/P variant is also specified as AEC-Q100 capable per datasheet catalog listings, allowing automotive designers to qualify it for non-safety body and chassis modules. When designing with this part, pay attention to the Deep Sleep current budget (cited in the DC characteristics section of the datasheet) and the wake-up latency from Deep Sleep, both of which dominate the average power calculation for duty-cycled sensor nodes. The CTMU peripheral simplifies capacitive touch sensing without an external timer IC. For production, the same silicon is offered in 20-pin SOIC, SSOP, QFN, and 28/44-pin packages within the KA301 family for layout flexibility. This page synthesizes distributor pricing, package-specific drop-in alternatives from the PIC24F family, and practical low-power design notes not found in the manufacturer datasheet itself.

見積もり お問い合わせ
PIC24F16KA301-I/P - 16-bit XLP MCU 16KB Flash 20-PDIP | Microchip
PIC24F16KA301-I/P

PIC24F16KA301-I/P - 16-bit XLP MCU 16KB Flash 20-PDIP | Microchip

The Microchip Technology PIC24F16KA301-I/P is a 16-bit PIC microcontroller featuring eXtreme Low Power (XLP) technology, 16 KB of Flash program memory, 2 KB of RAM, and 512 B of EEPROM, operating up to 32 MHz (16 MIPS) in a 20-pin PDIP through-hole package. It targets power-constrained and battery-powered applications, with unique peripherals like Deep Sleep Brown-Out Reset (DSBOR), Deep Sleep Watchdog Timer (DSWDT), and Real-Time Clock Calendar (RTCC) that continue running in Deep Sleep mode for industry-leading low-power performance. The industrial temperature grade (-40C to +85C) and wide 1.8V-3.6V operating voltage make it suitable for portable, medical, sensor, and IoT edge-node designs. A 16-bit MCU (microcontroller unit) is an embedded processor that integrates CPU, memory, peripherals, and I/O on a single die. PIC24F devices sit in Microchip's 16-bit MCU hierarchy above PIC16F and below dsPIC33/PIC32, using a modified Harvard architecture with a 24-bit instruction word. Within power-constrained embedded systems, the PIC24F16KA301-I/P occupies the XLP tier that emphasizes nanoWatt sleep currents over raw MHz performance. Key differentiating features include 16 MIPS performance at 32 MHz, integrated 12-bit ADC with CTMU (Charge Time Measurement Unit) for capacitive touch sensing, and 18 general-purpose I/O pins. The device supports up to 9 channels of 10-bit PWM, I2C, SPI, and UART peripherals. The 16 KB Flash provides approximately 5.5K single-word instructions, sufficient for typical sensor-fusion, motor-control, and display-driver firmware. The 20-pin PDIP package simplifies breadboard prototyping and hand-soldered prototypes compared to QFN alternatives. Architecturally, the PIC24F16KA301-I/P uses an internal oscillator eliminating external crystal components, includes a configurable 16-bit timer, and supports In-Circuit Serial Programming (ICSP) for in-field firmware updates. The CTMU peripheral enables cost-effective capacitive touch interfaces without dedicated touch controllers, ideal for appliances and user-interface panels. According to the Microchip datasheet, the XLP technology achieves sub-1 µA current in Deep Sleep mode with RTCC active. Typical applications include battery-powered sensor nodes, low-power wireless sensor hubs, smart thermostats, wearable health monitors, and home automation controllers. The combination of 16-bit performance and XLP sleep currents makes it well suited for solar-powered and Energy Harvesting applications where average current budgets fall below 100 µA. When designing with this part, leverage the DSBOR and DSWDT peripherals for unattended battery operation, and use the RTCC's 1-second alarm to wake from Deep Sleep on a scheduled basis rather than polling. This pattern reduces average system current by 1-2 orders of magnitude compared to continuous-loop firmware designs.

見積もり お問い合わせ
PIC24F16KA301T-I/SO - 16KB Flash XLP 16-bit MCU | Microchip
PIC24F16KA301T-I/SO

PIC24F16KA301T-I/SO - 16KB Flash XLP 16-bit MCU | Microchip

The Microchip Technology PIC24F16KA301T-I/SO is a 16-bit Flash microcontroller from the PIC24F family featuring eXtreme Low Power (XLP) technology, 16KB of program Flash, 2KB RAM, 512B EEPROM, and a 12-bit ADC with CTMU, supplied in a 20-pin SOIC package. It runs at up to 32 MHz delivering 16 MIPS and operates from 1.8V to 3.6V, making it suitable for both 3.3V and 5V-tolerant-system designs when paired with appropriate interface ICs. A 16-bit microcontroller is a programmable computing device built around a 16-bit data path, register file, and ALU, sitting hierarchically between 8-bit MCUs and 32-bit Cortex-M devices. The PIC24F family uses Microchip's modified Harvard architecture with a 16-bit instruction word and 24-bit instruction fetch, giving it a deterministic instruction set and predictable interrupt latency that distinguishes it from von-Neumann ARM parts. The KA-series sub-family adds the XLP power-management peripheral set, which is why designers choose it for battery-powered applications. Key features of the PIC24F16KA301T-I/SO include Deep Sleep current as low as 20 nA with RTCC, DSBOR, and DSWDT active, plus multiple low-power sleep modes down to a few hundred nanoamps in Sleep mode. The device integrates a 12-bit ADC with up to 9 channels, a Charge Time Measurement Unit (CTMU) for capacitive touch, three 16-bit timers, two UART, one SPI, and one I2C, plus a Real-Time Clock and Calendar with calendar mode. The '301' variant provides 17 GPIO lines in this 20-pin SOIC. Architecturally, the PIC24F16KA301T-I/SO uses a wide 16-bit data path with single-cycle hardware multiplier and divider, and its Flash memory supports self-programming via ICSPCLK/ICSPDAT for in-field firmware updates. The CTMU peripheral provides a constant-current source for capacitive touch sensing and time-of-flight measurements, eliminating the need for an external analog front-end. Core-independent peripherals (CIPs) such as the CRC, PWM, and CLC-like functions allow the part to handle background tasks without waking the CPU, which directly extends battery life. Typical applications include battery-powered IoT sensor nodes, portable medical telemetry devices, remote controls, wearable fitness bands, energy-harvesting wireless sensor transmitters, and ultra-low-power industrial data loggers. The combination of 16 MIPS performance, 16KB code space, and deep-sleep nanoamp currents lets designers consolidate what previously required an MCU plus an external RTC chip into a single device. When designing with this part, plan your power budget around the active run current of approximately 250 uA/MIPS at 3.3V and use the Peripheral Pin Select (PPS) feature to remap digital peripherals, which decouples ICSP programming pins from GPIO layout. For best Deep Sleep performance, ensure DSBOR is configured for ultra-low-power BOR, the RTCC is set to the LPRC 32 kHz source, and unused pins are configured as outputs driven low to avoid floating-pin leakage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including PPS peripheral remapping guidance and Deep Sleep current budgeting that helps engineers select the right PIC24F variant for their low-power application.

見積もり お問い合わせ
PIC24F16KA301T-I/SS - 16KB Flash 32MHz 16-bit MCU XLP | Microchip
PIC24F16KA301T-I/SS

PIC24F16KA301T-I/SS - 16KB Flash 32MHz 16-bit MCU XLP | Microchip

The Microchip PIC24F16KA301T-I/SS is a 16-bit Flash microcontroller from the PIC® XLP™ 24F family, featuring eXtreme Low Power (XLP) technology in a 20-pin SSOP package. It integrates 16KB of Flash program memory organized as 5.5K x 24 words, 2KB of SRAM data memory, and 512 bytes of Data EEPROM, executing up to 16 MIPS at 32 MHz from a 1.8V to 3.6V supply. The 'T' suffix denotes Tape & Reel packaging while 'I' denotes the industrial -40C to +85C temperature range. A 16-bit microcontroller (MCU) is a microprocessor-on-a-chip that combines a CPU core, non-volatile program memory, volatile data memory, and peripheral subsystems (ADC, timers, communication interfaces) on a single die. Within the embedded taxonomy, the PIC24F sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices, offering a C-friendly modified Harvard architecture with deterministic interrupt response - a class commonly chosen when 8-bit performance is insufficient but 32-bit cost or power is overkill. Key features of the PIC24F16KA301T-I/SS include XLP technology with Deep Sleep current under 100 nA, an integrated 12-bit ADC with up to 12 channels, dual I2C / SPI / UART communication interfaces, a Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, and three PWM channels with seven timers. The 17 I/O pins support peripheral pin select (PPS) for flexible signal routing. The device uses a modified Harvard RISC architecture with a 16-bit instruction word and a hardware multiplier that performs 17-bit x 17-bit single-cycle operations. On-chip peripherals include DSBOR (Deep Sleep Brown-Out Reset), DSWDT (Deep Sleep Watchdog Timer), and a Real-Time Clock Calendar (RTCC) that continue to operate in Deep Sleep mode - unique among mid-range 16-bit MCUs and enabling decade-long battery life on a single coin cell. Typical applications include battery-powered sensor nodes, wearable health monitors, remote controls, low-energy wireless sensor hubs, e-metering, and IoT edge devices. The CTMU peripheral enables capacitive touch buttons and sliders without an external controller, while the RTCC eliminates external RTC chips in time-stamped data loggers. When designing with this part, choose Deep Sleep mode for quiescent periods where average current dominates lifetime, and use the DSWDT to wake the device periodically for sensor polling. Place a 100 nF decoupling capacitor within 3 mm of each VDD/AVDD pin, and route the analog reference traces away from switching nodes. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical XLP design notes not consolidated in any single manufacturer document.

見積もり お問い合わせ
PIC24F16KA302-E/SP - 16-bit XLP MCU 16KB Flash | Microchip
PIC24F16KA302-E/SP

PIC24F16KA302-E/SP - 16-bit XLP MCU 16KB Flash | Microchip

The Microchip PIC24F16KA302-E/SP is a 16-bit Flash microcontroller from the PIC24F XLP (eXtreme Low Power) family, offering 16 KB of Flash program memory, 2 KB of RAM, and 512 bytes of EEPROM in a 28-pin SPDIP (0.3 inch, through-hole) package. It executes up to 16 MIPS at 32 MHz and integrates a 12-bit ADC, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock/Calendar (RTCC) that continues operating in Deep Sleep mode, making it well suited to battery-powered and energy-harvesting designs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. Within the broader taxonomy, this part belongs to the 16-bit microcontroller class, which sits between 8-bit MCUs (lower performance, simpler peripherals) and 32-bit MCUs (Cortex-M class, higher performance, more complex). The PIC24F line is Microchip's 16-bit entry tier, optimized for low power and ease of use with the MPLAB XC16 toolchain. Key differentiating features of the PIC24F16KA302 include the XLP Deep Sleep current (sub-uA range), the integrated CTMU for capacitive touch and precision time measurement, the RTCC with calendar mode, and a DSBOR/DSWDT (Deep Sleep Brown-Out Reset / Deep Sleep Watchdog Timer) that maintains supervisory functions while the core is asleep. These features let the device wake only on a meaningful event, dramatically extending battery life in sensor and metering products. The architecture is a modified Harvard 16-bit RISC core with a hardware multiplier for fast DSP-style operations, plus a rich peripheral set including multiple timers, UART, SPI, I2C, and 12-bit ADC with up to 13 input channels (package-dependent). The device operates from 1.8 V to 3.6 V across the industrial temperature range of -40C to +125C, and supports in-circuit serial programming (ICSP) and self-programmability. Typical applications span battery-powered sensor nodes, IoT edge devices, wearable health monitors, remote controls, smart metering, capacitive touch user interfaces, and industrial control where Deep Sleep consumption is the dominant lifetime metric. The -E temperature grade extends operation to +125C, suitable for harsh industrial environments. When designing with this part, choose the internal 8 MHz or 32 kHz oscillators carefully: switching to the low-power oscillator and disabling unused peripherals in Deep Sleep typically cuts quiescent current by orders of magnitude compared to running the full 32 MHz MIPS core. The CTMU requires careful PCB layout for capacitive touch: keep the sense traces short, guarded by a ground ring, and avoid running them near high-frequency signals. This page synthesizes distributor pricing, parametric cross-references in the same SPDIP-28 footprint, and practical low-power design notes not collected in any single manufacturer datasheet.

見積もり お問い合わせ
PIC24F16KA302-E/SS - 16-bit XLP MCU 16KB Flash 28-SSOP | Microchip
PIC24F16KA302-E/SS

PIC24F16KA302-E/SS - 16-bit XLP MCU 16KB Flash 28-SSOP | Microchip

The Microchip PIC24F16KA302-E/SS is a 16-bit microcontroller from the PIC24F XLP (eXtreme Low Power) family, featuring 16KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM in a 28-pin SSOP package. It runs at 32 MHz (16 MIPS) and is engineered for power-constrained and battery-powered applications with deep-sleep current measured in nanoamperes. A 16-bit microcontroller is a programmable integrated circuit that processes instructions and data on a 16-bit-wide datapath, sitting in the hierarchy between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, higher cost). 16-bit PIC24F parts occupy the sweet spot for embedded designs that need more computational headroom than 8-bit can offer, while keeping power and code density low. The PIC24F16KA302 belongs to the broader PIC24F family of flash microcontrollers, which itself sits under Microchip's microcontroller IC product line within power management and embedded control semiconductors. Key differentiating features include the XLP technology platform with nanoWatt XLP sleep modes, on-chip 12-bit ADC with CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, and unique peripherals like DSBOR (Deep Sleep Brown-Out Reset), DSWDT (Deep Sleep Watchdog Timer), and RTCC (Real-Time Clock Calendar) that continue to operate in deep sleep. The device supports 1.8V to 1.95V single-supply operation, with active current under 1 mA at full MIPS and deep-sleep currents below 100 nA typical. Multiple communication peripherals including UART, SPI, I2C, and 10-bit ADC channels provide flexible interfacing. Typical applications include battery-operated sensor nodes, wearable health monitors, IoT edge devices, remote controls, energy harvesting systems, and any portable product where years of battery life are required. The CTMU enables cost-effective capacitive touch buttons and sliders without external components. Design consideration: select a package variant matching your I/O and thermal budget; the 28-SSOP offers 18 general-purpose I/O with small board area. For systems requiring code execution from external memory or graphics, consider the higher-end PIC24EP or PIC32 families instead.

見積もり お問い合わせ
PIC24F16KA302-I/ML - 16KB Flash XLP MCU 32MHz 28-QFN | Microchip
PIC24F16KA302-I/ML

PIC24F16KA302-I/ML - 16KB Flash XLP MCU 32MHz 28-QFN | Microchip

The Microchip Technology PIC24F16KA302-I/ML is a 16-bit PIC24F microcontroller from the XLP (eXtreme Low Power) family, featuring 16 KB Flash program memory, 2 KB RAM and 512 bytes of EEPROM, with a 32 MHz MIPS core delivering 16 MIPS performance, housed in a 28-pin QFN (6x6 mm) package. The PIC24F16KA302 family targets battery-powered and energy-harvesting designs where deep-sleep current in the nanoamp range is mandatory. The /ML package suffix selects the 28-lead QFN (Quad Flat No-lead) variant. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, peripherals around one silicon die. Within the taxonomy, PIC24F belongs to the 16-bit MCU class, which sits between 8-bit MCUs (PIC10/12/18, AVR, 8051) and 32-bit MCUs (PIC32, ARM Cortex-M). The 'F' suffix indicates Flash program memory. XLP technology adds deep-sleep modes with wake-on-interrupt, RTC, and ultra-low run currents, positioning this part below many Cortex-M0+ devices in active power yet 2-3 orders lower in sleep current. Key features include a 12-bit A/D converter with up to 16 channels (depending on package), 3 op-amps / comparators with CTMU (Charge Time Measurement Unit) for capacitive touch, multiple timers (T1-T5), 2 UART, 2 SPI, 2 I2C, RTCC, and a chargeable DSBOR/DSWDT deep-sleep brown-out reset and watchdog. Voltage operation is 1.8 V to 3.6 V across -40C to +85C industrial range. The CTMU enables capacitive-touch buttons, sliders, and proximity sensing without an external analog front-end. The PIC24F16KA302 architecture uses a 16-bit modified Harvard structure with a 24-bit instruction word and 16-bit data path, plus a hardware multiply/divide and DSP extensions, allowing efficient C compilation under MPLAB XC16. The Flash memory supports self-programming via ICSP for in-field firmware updates, while the 512-byte EEPROM handles non-volatile user parameters (calibration, settings). The 32 MHz CPU clock is synthesized from the internal 8 MHz FRC with PLL, eliminating external crystals for cost-sensitive designs. Typical applications include battery-powered sensor nodes with capacitive touch, wearable health monitors (HR, SpO2 front-ends), energy-harvesting devices, IoT endpoints with sleep duty cycling, remote controls, and low-power wireless sensor nodes paired with sub-GHz radios (MRF89XA, RN2483). The CTMU peripheral is particularly useful in proximity-sensing applications and water-level / ice detection. Design considerations include careful decoupling of AVDD/AVSS, separate analog and digital ground planes, and verifying sleep-current budgets before committing to the design. Unlike 32-bit ARM Cortex-M0+ parts, the PIC24F has stronger analog peripherals (12-bit ADC, op-amps, CTMU) and lower sleep current, making it preferable for analog-front-end designs. This page synthesizes distributor pricing tiers, drop-in alternatives across the PIC24F16KA family, and practical design notes not found in the manufacturer datasheet alone, providing engineering context beyond raw specification repetition.

見積もり お問い合わせ
PIC24F16KA302-I/SO - 16-bit 32MHz XLP MCU 16KB Flash | Microchip
PIC24F16KA302-I/SO

PIC24F16KA302-I/SO - 16-bit 32MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC24F16KA302-I/SO is a 16-bit PIC® microcontroller built on the eXtreme Low Power (XLP) technology platform, delivering up to 32 MHz (16 MIPS) performance with 16 KB Flash, 2 KB RAM, and 512 B EEPROM in a 28-pin SOIC (SO) wide-body package. It operates from 1.8 V to 3.6 V across an industrial -40 °C to +85 °C temperature range, targeting battery-powered and energy-harvesting designs where quiescent current dominates battery life. A microcontroller (MCU) is an integrated circuit containing a processor core, program and data memory, peripherals, and I/O on a single die. The 16-bit PIC24F architecture sits in the hierarchy: PIC24F microcontroller -> 16-bit MCU -> embedded controller -> semiconductor IC. The PIC24F core uses a modified Harvard architecture with a 16-bit wide data path, giving the family more headroom for arithmetic-intensive signal processing than 8-bit MCUs while keeping cost and power below 32-bit Cortex-M0+ parts. Key features include XLP Deep Sleep current as low as 20 nA with RTCC, DSBOR and DSWDT running; a 12-bit ADC with up to 17 analog inputs; an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement; multiple serial interfaces (UART, SPI, I2C); and configurable Peripheral Pin Select (PPS) on select ports. The 28-SOIC wide-body variant (-SO) provides 17 usable I/O pins on a 0.300" body, well-suited for hand-soldering and small-form-factor production. Architecturally, the PIC24F16KA302 belongs to the KA3 family and shares its peripheral set with the KA1 (smaller pin-count) siblings, enabling firmware portability across 20/28/44/48-pin variants. The CTMU is the standout peripheral, allowing mTouch capacitive touch sensing and accurate time-of-flight measurement for flow meters without an external timing IC. Combined with deep-sleep nanoWatt XLP technology, this makes the device attractive for sensor nodes that wake, sample, transmit, and return to sleep within microamps of average current. Typical applications include IoT sensor endpoints, battery-powered medical devices such as glucose meters, wearable fitness bands, remote controls, smart thermostats, and industrial data loggers. The 12-bit ADC and CTMU allow direct interface with resistive/capacitive sensors, and the low 1.8 V minimum supply supports direct Li-coin-cell operation without boost circuitry. When designing in this MCU, allocate adequate decoupling (100 nF + 10 µF) near VDD/AVDD pins and follow Microchip's recommended ICSP programming header layout for in-circuit firmware updates. Verify that your total I/O count including debug pins is within the 17-pin budget before committing to the 28-SOIC footprint; if you need more I/O, the 44-pin PIC24F16KA304 in the same family offers pin-for-pin firmware compatibility. This page synthesizes distributor pricing, same-family and cross-family drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a one-stop reference for component selection.

見積もり お問い合わせ
PIC24F16KA302T-I/ML - 16-Bit 32MHz XLP MCU 16KB Flash | Microchip
PIC24F16KA302T-I/ML

PIC24F16KA302T-I/ML - 16-Bit 32MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC24F16KA302T-I/ML is a 16-bit PIC® XLP™ microcontroller featuring an eXtreme Low Power 24F core running at up to 32 MHz, delivering 16 MIPS of computational throughput. It integrates 16 KB of Flash program memory (5.5K x 24), 2 KB of SRAM and 512 bytes of EEPROM, all housed in a 28-pin QFN package measuring 6x6 mm with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory and programmable peripherals around a common bus, designed to sense and control embedded systems. PIC24F devices belong to Microchip's 16-bit enhanced MCU family, sitting in the product hierarchy above 8-bit PIC16/PIC18 parts and below the 32-bit PIC32MX series. The XLP designation denotes ultra-low-power operation suited to battery-powered applications, with the broader family classified as a low-power general-purpose microcontroller within the semiconductor IC category. Key features include a 12-bit ADC with CTMU (Charge Time Measurement Unit), 3 analog comparators, 7 timers, 3 PWM channels and standard on-chip housekeeping peripherals such as POR, BOR, PWRT and WDT. The device supports 17 general-purpose I/O pins and operates from a 1.8 V to 3.6 V supply, drawing deep-sleep currents in the nanoampere range. Peripherals like DSBOR, DSWDT and RTCC continue running in Deep Sleep mode, which is the defining value proposition of the XLP family. The architecture uses a 16-bit modified Harvard core with single-cycle hardware multiply, enabling deterministic interrupt response and efficient DSP-class math. Deep Sleep mode reduces current consumption below typical RTC-only baselines while still keeping a wake-up timer active, making the part competitive against ultra-low-power ARM Cortex-M0+ alternatives when total system power budget, not peak performance, is the gating metric. Typical applications include battery-powered sensor nodes, wearable health monitors, remote controls, energy-harvesting systems, IoT edge devices and portable medical accessories. The wide 1.8-3.6 V operating range allows direct connection to single-cell Li-ion or two-AA battery stacks without an external regulator. When designing in this part, place a 0.1 µF decoupling capacitor as close as possible to each VDD pin and bond the exposed thermal pad (EP) to a continuous ground pour to provide both thermal dissipation and a low-impedance return path for high-frequency switching I/O.

見積もり お問い合わせ
PIC24F16KA304-E/MV - 16KB Flash XLP 16-bit MCU 48-UQFN | Microchip
PIC24F16KA304-E/MV

PIC24F16KA304-E/MV - 16KB Flash XLP 16-bit MCU 48-UQFN | Microchip

The Microchip Technology PIC24F16KA304-E/MV is a 16-bit microcontroller from the PIC® XLP™ 24F family, delivering 16 MIPS performance from a 32 MHz core, with 16 KB Flash program memory, 2 KB RAM and 512 bytes EEPROM, housed in a 48-pin UQFN (6x6 mm) package. The "-E" temperature suffix indicates the -40°C to +125°C extended industrial operating range, and the "MV" package designator denotes the UQFN-48 (6x6) variant. The device is purpose-built for power-constrained and battery-powered applications, leveraging Microchip's eXtreme Low Power (XLP) technology to achieve nanoWatt sleep currents with functional peripherals such as DSBOR, DSWDT and RTCC that keep operating in Deep Sleep mode. A 16-bit PIC microcontroller is a member of the advanced Harvard-architecture RISC controller family that executes most instructions in a single cycle, providing higher code density and deterministic throughput than legacy 8-bit parts while retaining the familiar PIC ecosystem of MPLAB X IDE, XC16 compilers and a vast library of application notes. Within the broader hierarchy, PIC24F devices sit between PIC16 (8-bit) and dsPIC33 (16-bit DSP) families, targeting general-purpose embedded applications where low power and rich peripherals matter more than absolute compute. Differentiating specifications include 16 KB self-programmable Flash, 2 KB SRAM, 512 bytes EEPROM, a 12-bit ADC with up to 16 input channels, 5 Capture/Compare/PWM modules, Real-Time Clock and Calendar (RTCC) with calendar mode, 2 I²C, 2 SPI and 2 UART interfaces, a Charge Time Measurement Unit (CTMU) for capacitive touch, and a 16-bit timer/counter bank. The 48-UQFN (6x6 mm) package exposes up to 39 general-purpose I/O pins, suiting compact designs that require many parallel sensor or signal interfaces. Internally, the PIC24F16KA304 uses a 16-bit modified-Harvard core with a 16x16 hardware multiply, single-cycle bit manipulation and a peripheral engine supporting DMA-free interrupt-driven operation. The Deep Sleep state drops current to nanoamp levels while retaining RTCC, DSBOR and DSWDT, enabling years of operation from a single coin cell. CTMU allows touch buttons and proximity sensing without external analogue ICs. Typical applications include IoT sensor nodes, wearable health monitors, battery-powered instrumentation, capacitive touch interfaces, smart utility meters, energy-harvesting nodes and remote controls. The wide 1.8V–5.5V operating range permits direct connection to lithium, alkaline or even energy-harvested supplies. Designers should budget for the 48-UQFN's 0.4 mm pitch reflow profile and ensure the exposed thermal pad is properly soldered to the ground plane to minimise thermal resistance and maximise electrical performance.

見積もり お問い合わせ
PIC24F16KA304-E/PT - 16KB Flash XLP 16-bit MCU | Microchip
PIC24F16KA304-E/PT

PIC24F16KA304-E/PT - 16KB Flash XLP 16-bit MCU | Microchip

The Microchip PIC24F16KA304-E/PT is a 16-bit PIC microcontroller from the PIC24F XLP family, featuring 16KB of Flash program memory, 2KB of RAM, and 512B of EEPROM, housed in a 44-pin TQFP package. It operates up to 32 MHz delivering 16 MIPS performance with an internal oscillator, and integrates a 12-bit ADC and Charge Time Measurement Unit (CTMU) for capacitive touch and sensor applications. A microcontroller (MCU) is a single-chip computer that contains a processor core, memory, and programmable I/O peripherals. The PIC24F belongs to the 16-bit microcontroller category, positioned between 8-bit MCUs (e.g., PIC16, PIC18) and 32-bit MCUs (e.g., PIC32, ARM Cortex-M). Within Microchip's eXtreme Low Power (XLP) family, the PIC24F16KA304 targets battery-powered and energy-harvesting applications where deep-sleep current and peripheral operation in sleep mode are critical design parameters. Key features of the PIC24F16KA304 include eXtreme Low Power technology with nanoWatt XLP sleep currents in the microampere range, a deep-sleep operating current supporting RTCC, DSBOR (Deep Sleep Brown-Out Reset) and DSWDT (Deep Sleep Watchdog Timer) that remain active in Deep Sleep mode. The device integrates a 12-bit A/D converter with up to 16 channels, 5 timers, 2 UART, 1 SPI, 1 I2C, and 18 general-purpose I/O pins. Operating voltage spans 1.8V to 3.6V with industrial and extended temperature grade options. Architecturally, the PIC24F16KA304 uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, providing 5.5K addressable words of program memory. The internal 8 MHz Fast RC oscillator with PLL supports system clock up to 32 MHz. Peripherals include a Real-Time Clock and Calendar (RTCC), 5 Capture/Compare/PWM modules, and the unique CTMU for capacitive touch sensing and precise time measurement. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote controls, home automation, energy harvesting devices, and consumer electronics requiring extended battery life. The integrated CTMU makes it particularly suitable for capacitive touch buttons, sliders, and proximity sensing. The wide operating voltage range and ultra-low sleep current also support solar-powered edge nodes and wireless sensor networks. When designing with this part, consider that the 'E' suffix indicates the extended temperature grade (-40C to +125C), while 'I' indicates industrial (-40C to +85C). The /PT suffix denotes the 44-pin TQFP package; /MV denotes UQFN, /SP denotes SPDIP, and /SO denotes SOIC - all variants share the same silicon and pinout family but differ in PCB footprint requirements. This page synthesizes distributor pricing, drop-in alternatives from the PIC24F XLP family, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC24F16KA304-I/ML - 16-bit XLP MCU, 32MHz, 16KB Flash, 44-QFN
PIC24F16KA304-I/ML

PIC24F16KA304-I/ML - 16-bit XLP MCU, 32MHz, 16KB Flash, 44-QFN

The Microchip Technology PIC24F16KA304-I/ML is a 16-bit PIC microcontroller from the PIC24F XLP (eXtreme Low Power) family, featuring 16 KB (5.5K x 24) of Flash program memory, a 32 MHz maximum CPU clock, and a 44-pin QFN (8x8 mm) package with exposed thermal pad. It operates from 1.8 V to 3.6 V and integrates nanoWatt XLP technology with Deep Sleep currents in the nanoamp range, making it suitable for coin-cell powered designs. A 16-bit MCU (microcontroller unit) is an integrated circuit combining a processor core, non-volatile program memory (Flash), working RAM, and multiple peripherals on a single die. Within Microchip's portfolio, the PIC24F family sits in the eXtreme Low Power (XLP) tier, engineered for sleep-mode currents below 1 microamp while keeping real-time peripherals alive. PIC24F parts also integrate analog peripherals like 12-bit ADC, comparators, CTMU, and op amps, fitting industrial control, IoT sensor nodes, metering, and motor control applications. As a general-purpose 16-bit MCU, PIC24F bridges 8-bit PIC16/PIC18 designs and higher-performance dsPIC33/PIC32 architectures. Key features include 16 KB Flash, 2 KB RAM, 512 B EEPROM, a 12-bit ADC, multiple timers (Timer1, Timer2/3, RTCC), 5 CCP/SCCP modules, two UART/SPI/I2C modules, 39 user I/O pins, and a 16-bit MIPS CPU core with hardware multiply/divide. The XLP architecture improves battery life through nanoWatt technology with Deep Sleep currents in the nanoamp range, and unique peripherals like DSBOR, DSWDT, and RTCC keep operating while the CPU is asleep. The 44-pin QFN package provides a small 8 mm x 8 mm footprint with an exposed pad that enhances thermal dissipation and gives access to the full pin count. CMOS-compatible I/O buffers support 5 V-tolerant inputs on most pins, allowing interface to legacy 5 V peripherals without level translation. The 16-bit modified Harvard architecture separates program and data buses for single-cycle fetches while sharing the same address space. Typical applications include IoT sensor nodes, battery-powered metering, industrial control, motor control, embedded automation, and low-power board designs. The XLP peripherals enable continuous operation for years on a single coin cell. When designing with this part, place the exposed pad (EP) thermal pad with multiple thermal vias for proper heat dissipation. Verify all unused inputs are tied to VDD or VSS per Microchip recommendations to minimize current draw in Deep Sleep. The RTCC, DSWDT, and DSBOR wake sources allow the CPU core to remain asleep while timekeeping and watchdog tasks continue, which is the key XLP design pattern for ultra-low-power designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24F16KA304-I/MV - 16-bit 32MHz 16KB Flash XLP MCU | Microchip
PIC24F16KA304-I/MV

PIC24F16KA304-I/MV - 16-bit 32MHz 16KB Flash XLP MCU | Microchip

The Microchip Technology PIC24F16KA304-I/MV is a 16-bit PIC24F microcontroller featuring eXtreme Low Power (XLP) technology, 32MHz operation, 16KB Flash program memory, 2KB RAM, and 512B EEPROM, housed in a 48-pin UQFN (MV) 6x6mm package. It operates from 1.8V to 3.6V and integrates peripherals such as a 12-bit ADC, CTMU (Charge Time Measurement Unit), and 17 I/O pins. What is a PIC microcontroller? A PIC (Peripheral Interface Controller) microcontroller is a compact, programmable integrated circuit that combines a CPU, memory, and peripherals on a single chip. PIC24F devices belong to the 16-bit MCU family within Microchip's broader taxonomy: MCU -> 16-bit microcontroller -> PIC24F -> PIC24F KA family. The XLP series targets battery-powered and energy-harvesting applications where nanoamp sleep currents extend operating life across multi-year deployments. Key features of the PIC24F16KA304-I/MV include DSBOR (Deep Sleep Brown-Out Reset), DSWDT (Deep Sleep Watchdog Timer), and RTCC (Real-Time Clock/Calendar) that continue running in Deep Sleep mode. The 16 MIPS performance, 12-bit ADC with CTMU for capacitive touch sensing, and 5.5K x 24 Flash organization make this device well-suited for general-purpose embedded control with ultra-low standby power requirements. The PIC24F16KA304 utilizes a modified Harvard architecture with 16-bit instructions and 24-bit wide Flash words. The XLP technology delivers nanoWatt sleep currents and Deep Sleep modes that preserve peripheral state while minimizing energy consumption for battery-constrained designs. Typical applications include battery-powered sensor nodes, wearable health monitors, remote controls, IoT edge devices, capacitive touch user interfaces, and energy-harvesting systems. The CTMU peripheral enables cost-effective mTouch capacitive touch buttons and sliders without external analog components. When designing with this device, prioritize power profile analysis using Microchip's MPLAB X IDE with XLP Energy Explorer. Decoupling capacitors should be placed adjacent to VDD/VCAP pins, and unused I/O pins must be configured as outputs to minimize sleep current leakage. This page consolidates distributor pricing, drop-in package-compatible alternatives, and practical design notes synthesized from the manufacturer datasheet and verified distributor listings - data not aggregated elsewhere in a single coherent reference.

見積もり お問い合わせ
PIC24F16KA304-I/PT - 16-bit 32MHz XLP MCU 16KB Flash | Microchip
PIC24F16KA304-I/PT

PIC24F16KA304-I/PT - 16-bit 32MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC24F16KA304-I/PT is a 16-bit RISC microcontroller from the PIC24F XLP family, featuring 16KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It operates at up to 32 MHz delivering 16 MIPS, integrates a 12-bit ADC, and is engineered around Microchip's eXtreme Low Power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, ADC/DAC, communication interfaces, and I/O ports. The PIC24F16KA304 belongs to the 16-bit PIC24F family, which sits in Microchip's hierarchy: 16-bit MCU -> PIC24F -> PIC24F XLP low-power series -> power-constrained and battery-powered applications. Compared with 8-bit PIC16/PIC18 parts, the 16-bit core enables larger address spaces, wider data paths, and richer DSP-style arithmetic for signal processing. Key features include a 12-bit A/D converter with up to 30 channels depending on package, multiple communication peripherals (UART, SPI, I2C), 5 timers, a Real-Time Clock and Calendar (RTCC) that operates in Deep Sleep, plus dedicated Deep Sleep Brown-Out Reset (DSBOR) and Deep Sleep Watchdog Timer (DSWDT). XLP technology enables typical Deep Sleep currents measured in nanoamperes, making the device well suited to battery-powered designs. The CTMU (Charge Time Measurement Unit) supports capacitive touch sensing and precise time-of-flight measurements. The architecture uses a modified Harvard design with separate program and data buses, a 24-bit instruction word for compact code density, and a deterministic interrupt model. Up to 32 MHz operation across an industrial -40C to +85C range provides ample headroom for closed-loop control, sensor fusion, and USB-less communication stacks. Typical applications include battery-powered sensor nodes, IoT edge devices, portable medical instrumentation, consumer wearables, and industrial data loggers. The wide operating range also suits automotive accessory and ruggedized telemetry systems. When designing with this part, pair a low-Iq LDO with the MCU, route the 32.768 kHz crystal traces short and guarded, and use the CTMU only after calibrating against an internal reference to achieve reliable touch sensing.

見積もり お問い合わせ
PIC24F16KA304T-I/MV - 16-bit XLP MCU, 16KB Flash, 48-UQFN | Microchip
PIC24F16KA304T-I/MV

PIC24F16KA304T-I/MV - 16-bit XLP MCU, 16KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC24F16KA304T-I/MV is a 16-bit PIC24F microcontroller from the eXtreme Low Power (XLP) family, offering 16 KB program Flash, 2 KB RAM, and 512 bytes of EEPROM in a compact 48-pin UQFN (6x6 mm) package with exposed pad. It operates at up to 32 MHz delivering 16 MIPS, integrates a 12-bit ADC, CTMU touch-sensing peripheral, and is qualified for the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), data EEPROM, and a rich set of peripherals (ADC, timers, communication interfaces). The PIC24F family sits in Microchip's 16-bit MCU hierarchy between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/PIC32MM devices, offering a sweet spot of deterministic performance, low power, and rich peripherals. XLP variants extend battery life through deep-sleep currents in the nanoamp range, support peripheral operation while the core is halted, and add features like DSBOR, DSWDT, and RTCC that continue running in Deep Sleep. Key features include 16 MIPS at 32 MHz from a 1.8V-3.6V supply, 12-bit ADC with 10/12-bit modes, hardware multiplier for DSP-like math, up to 39 I/O pins, and multiple communication peripherals including I2C, SPI, UART with IrDA and LIN support. The CTMU enables capacitive touch sensing without external components, while the mTouch solution simplifies implementation of buttons, sliders, and proximity sensors in low-power HMI applications. Typical applications include wearable fitness and medical monitors, remote sensor nodes, IoT edge devices, battery-powered HMI with capacitive touch, and consumer electronics where sleep current and form factor dominate the BOM. The 48-UQFN package with exposed pad supports compact PCB layouts and provides an effective thermal path for the industrial temperature range. When designing with this device, choose the correct PIC24F16KA304 variant suffix for your temperature grade (I = industrial, E = extended) and pin count. Always place a 100 nF decoupling capacitor within 3 mm of each VDD pin and tie the exposed pad to a solid ground plane for thermal dissipation and EMI suppression. This page synthesizes distributor pricing, drop-in same-package alternatives from the same Microchip PIC24F/KA family, and practical design notes not aggregated elsewhere.

見積もり お問い合わせ
PIC24F16KA304T-I/PT - 16-bit XLP MCU, 16KB Flash, 44-TQFP | Microchip
PIC24F16KA304T-I/PT

PIC24F16KA304T-I/PT - 16-bit XLP MCU, 16KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC24F16KA304T-I/PT is a 16-bit Flash MCU from the PIC24F XLP family, featuring 16 KB of program Flash, 2 KB of RAM, and 512 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package rated for the -40C to +85C industrial temperature range. It integrates a 16 MIPS PIC24 CPU core running up to 32 MHz, a 12-bit ADC with CTMU (Charge Time Measurement Unit), and eXtreme Low Power (XLP) peripherals including DSBOR, DSWDT, and RTCC that operate in Deep Sleep mode for industry-leading battery life. The part suffix "/PT" denotes the 44-pin TQFP package while the trailing "T" in the part number indicates tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich mix of peripherals such as ADCs, timers, communication interfaces, and I/O ports onto a single silicon die. Within the broader hierarchy, this device sits in the microcontrollers branch of integrated circuits, alongside the categories of digital signal controllers (DSCs) and microprocessors (MPUs). PIC24F devices specifically target applications where deterministic real-time response and ultra-low power consumption are required, slotting between 8-bit PIC16/PIC18 MCUs and higher-performance dsPIC33/PIC32 parts. Key features of the PIC24F16KA304 family include the eXtreme Low Power (XLP) technology, with typical Deep Sleep currents below the microamp range, and on-chip peripherals such as the RTCC, DS-WDT, and DS-BOR that continue running while the CPU is halted. The 12-bit A/D converter combined with the CTMU enables touch sensing and accurate time-of-flight measurement using a single ADC channel. Multiple serial interfaces (UART, SPI, I2C) and a configurable 16-bit timer/capture/compare/PWM block support motor control, sensor fusion, and human-interface designs. The architecture uses a modified Harvard layout with separate program Flash and data RAM buses, allowing simultaneous instruction fetch and data access, plus a 16-element working register array that simplifies C compiler code generation. The XLP technology targets battery-powered designs where average current consumption dominates battery-life calculations, making the part well-suited for products that spend most of their operational life in sleep states. JTAG and ICSP debug interfaces are supported through dedicated pins, enabling in-circuit debugging without consuming additional package pins. Typical applications include battery-powered IoT sensor nodes, wearable health and fitness devices, remote controls, electronic shelf labels, smart thermostats, low-power wireless sensor hubs, and industrial metering where long battery life and moderate processing performance are both required. The 44-pin TQFP package provides ample I/O for mixed-signal designs while maintaining a small 10x10 mm footprint. When designing with this MCU, ensure the VDDCORE pin is bypassed with the recommended LC/RC filter and that VDD is decoupled with a 100 nF ceramic capacitor placed within 5 mm of the package. For lowest deep-sleep current, leave unused I/O pins configured as outputs driving low and disable unused peripherals via the PMD (Peripheral Module Disable) registers before entering sleep. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical low-power design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24F16KL401-E/MQ - 16KB Flash, 32MHz 16-bit MCU | Microchip
PIC24F16KL401-E/MQ

PIC24F16KL401-E/MQ - 16KB Flash, 32MHz 16-bit MCU | Microchip

The Microchip Technology PIC24F16KL401-E/MQ is a cost-effective 16-bit microcontroller built on the PIC24F core with nanoWatt XLP (eXtreme Low Power) technology, delivering up to 32 MHz (16 MIPS) performance from a 1.8 V to 3.6 V supply in a 20-pin VQFN (MQ) 5x5 mm package with exposed thermal pad. It integrates 16 KB of Flash program memory (5.5K x 24 instruction words), 1 KB of SRAM data memory, and 512 bytes of EEPROM, giving designers ample headroom for cost-sensitive 16-bit applications that outgrow 8-bit PIC18 architectures. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and programmable peripherals. The PIC24F family sits in the broader hierarchy of microcontrollers -> 16-bit microcontrollers -> flash microcontrollers -> embedded controllers -> semiconductors. The 16-bit PIC24F architecture uses a modified Harvard RISC core, providing deterministic instruction execution with rich peripheral integration in a tiny footprint ideal for low-power embedded systems. Key features include a 12-channel 10-bit ADC for sensor and battery monitoring, one MSSP peripheral supporting both I2C and SPI communication, and a CCP/ECCP module for capture/compare/PWM control - features inherited from the PIC18 family to enable easy migration. The device also provides up to 17 I/O pins, multiple timers, and nanoWatt XLP technology that achieves sub-microamp sleep currents for battery-powered applications. The PIC24F16KL401-E/MQ uses a 3.3 V typical operating voltage with wide 1.8 V to 3.6 V range, JTAG/ICSP programming/debug interfaces, and integrated low-power modes including Sleep, Idle, and Deep Sleep. The 5x5 mm VQFN-20 footprint includes an exposed thermal pad that improves thermal dissipation for industrial temperature (-40C to +125C) operation and reduces PCB footprint compared to SOIC-20 alternatives. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power wireless sensor endpoints, consumer electronics with LCD/keypad interfaces, and cost-sensitive industrial control. Peripherals include 12-bit ADC channels, MSSP, CCP/ECCP, comparators, and timers, providing a complete embedded solution with minimal external components. When designing with this part, ensure the 32 MHz operation is paired with adequate decoupling (100 nF + 10 uF bulk) near the VDD pins. Program the MSSP early to match your target bus speed. Choose PIC24F08KL401-E/MQ if 8 KB Flash suffices; choose PIC24F32KL401 if 32 KB Flash is needed - all share the same VQFN-20 (MQ) package footprint. This page synthesizes distributor pricing, same-package drop-in alternatives (within the PIC24F family), and practical design notes not found in the manufacturer datasheet alone - giving engineers a one-stop engineering reference for the PIC24F16KL401-E/MQ.

見積もり お問い合わせ
PIC24F16KL401-E/P - 16-Bit 32MHz XLP Microcontroller | Microchip
PIC24F16KL401-E/P

PIC24F16KL401-E/P - 16-Bit 32MHz XLP Microcontroller | Microchip

The Microchip Technology PIC24F16KL401-E/P is a cost-sensitive 16-bit PIC24F microcontroller with up to 16 MIPS, 32 MHz operation, 16 KB of Flash memory, and nanoWatt XLP technology in a 20-pin through-hole DIP package. The verified distributor snippets identify the E/P configuration as a 20-pin, 0.300-inch, 7.62 mm package, while Mouser lists an 8 KB and 1 KB RAM configuration in one result. A microcontroller is a semiconductor device that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one compact embedded-control component. The PIC24F belongs to the PIC24 family of 16-bit RISC microcontrollers, combining digital control with communication and timing peripherals. Its XLP architecture is intended for cost-sensitive designs that need low-power operation and deterministic embedded performance. The supplied data confirms 16-bit processing, 32 MHz maximum frequency, 16 KB Flash, 1 KB data RAM, 512 bytes of EEPROM, and 3 V operation from the Mouser result. It also identifies MSSP support for I2C or SPI and CCP/ECCP capability. These peripherals make the device suitable for local sensing, actuator control, communication links, and compact consumer or industrial products. The PIC24F16KL401 family combines a PIC24 RISC core with integrated Flash, SRAM, EEPROM, and mixed-signal or timing functions, depending on the exact family variant. The E/P ordering suffix identifies the verified 20-DIP package, while the family documentation describes 14-, 20-, and 28-pin options. Package choice determines PCB footprint and assembly method; the DIP format is useful for prototypes, through-hole designs, and manually assembled boards. Typical applications include portable consumer products, electronic toys, portable media players, GPS accessories, cell-phone accessories, medical testers, dispensers, inhalers, and safety or security equipment. The 16 KB Flash capacity provides room for a small embedded application, while the 16-bit core and peripheral set support control loops and communication tasks without requiring a larger controller. When designing with the PIC24F16KL401-E/P, verify the exact memory map, I/O assignments, clock configuration, and peripheral multiplexing against the Microchip datasheet. The through-hole DIP package supports straightforward prototype insertion, but production designs must account for wider spacing, board area, and connector accessibility. Pricing and availability should be checked as of 2026-10-23 because distributor inventory and commercial terms change. This page combines verified manufacturer and distributor references with package and procurement context, while clearly marking electrical details that were not supplied rather than estimating them. The information is intended for engineers evaluating an exact MPN, not for substituting a different package or MCU without checking pin-level compatibility.

見積もり お問い合わせ