集積回路

PIC32MX430F064LT-I/TL

PIC32MX430F064LT-I/TL - 80MHz 32-bit MIPS MCU, 64KB Flash | Microchip

The Microchip Technology PIC32MX430F064LT-I/TL is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the broader PIC32MX3/4 family hierarchy, the PIC32MX430F064L sits as a cost-optimized 32-bit tier that bridges 8/16-bit PIC microcontrollers and the higher-end PIC32MZ family, designed for embedded applications requiring genuine 32-bit performance at low BOM cost. Key features include the MIPS32 M4K 32-bit RISC core delivering 1.56 DMIPS/MHz (up to 125 DMIPS), 64 KB Flash with 20-year retention, 16 KB SRAM, two I2S/SPI interfaces, two I2C, two UART, USB-OTG with integrated PHY, a 10-bit ADC with up to 28 input channels, a Charge Time Measurement Unit (CTMU), and up to five 16-bit timers. The integrated DMA controller and 8-bit parallel master port (PMP) reduce CPU load for high-throughput peripherals, while the on-chip 8 MHz internal oscillator supports system operation without an external crystal. Typical applications include USB peripherals, industrial control panels, low-cost graphical user interfaces (GLCDs), consumer audio with I2S, sensor hubs, and home appliances. The 80 MHz core with single-cycle multiply gives the throughput needed for closed-loop motor control, USB audio class devices, and PID-based process control where 8-bit MCUs lack the headroom. A key design consideration is the 124-pin VTLA exposed-pad package - the EP pad MUST be soldered to a continuous copper ground plane for both thermal dissipation and electrical reference. For cost-sensitive applications, the same family offers smaller Flash options (PIC32MX430F256L, PIC32MX430F128L) in the same VTLA-124 footprint, enabling drop-in scaling across product lines. This page synthesizes live distributor pricing, pin-compatible drop-in alternatives from the same PIC32MX3/4 family, and practical hardware/PCB design notes that are not present in the manufacturer datasheet, giving engineers a one-stop reference for sourcing, selection, and design-in decisions.

USD $2.86 在庫あり

PIC32MX430F064LT-V/PT

PIC32MX430F064LT-V/PT - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX430F064LT-V/PT is a 32-bit MIPS32 M4K PIC microcontroller running at 80 MHz with 64 KB of Flash and 16 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. The 'L' suffix denotes 100-pin package, the 'T' suffix denotes Tape & Reel, and the 'V' suffix denotes the automotive (AEC-Q100 qualified) grade. The device integrates a rich peripheral set including USB-OTG, two I2S/SPI, CTMU, DMA, and a 10-bit 1 Msps ADC. A PIC32MX 32-bit microcontroller is a member of the MIPS-based MCU family from Microchip Technology, positioned in the broader hierarchy: PIC32MX -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M4K core executes the MIPS32 instruction set and provides 1.56 DMIPS/MHz, enabling deterministic real-time control with ample headroom for protocol stacks, GUI rendering, or DSP kernels in cost-sensitive industrial and consumer designs. Key features include 80 MHz core clock with 100 MHz (50 MHz peripheral bus) operation, 64 KB Flash program memory, 16 KB SRAM, USB-2.0 full-speed OTG, dedicated DMA controller with 8 channels, 10-bit 1 Msps ADC with up to 28 analog inputs, two I2C, two SPI/I2S, two UART, five 16-bit timers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurement. AEC-Q100 qualification at grade 2 (-40C to +105C) supports automotive infotainment, body electronics, and HMI applications. The PIC32MX architecture uses a 5-stage pipeline Harvard bus with separate Flash and SRAM paths, peripheral DMA that offloads I/O from the core, and a peripheral bus clock derived from the system clock via configurable divisors. Pin remapping via Peripheral Pin Select (PPS) allows flexible PCB routing of digital peripherals without package variants. Typical applications include industrial control HMI with USB connectivity, automotive infotainment auxiliary controllers, USB-to-UART bridges, embedded data loggers with capacitive touch, and low-cost industrial sensor nodes. The combination of USB-OTG and CTMU enables single-chip USB peripherals with touch interfaces. When designing with this device, note that the AEC-Q100 V-grade requires a 2.5V/3.3V supply range and thermal-grade operation to +105C; commercial-grade parts are recommended if AEC-Q100 is not required. PPS must be configured before use of remappable peripherals, and the 50 MHz peripheral bus caps SPI/I2S throughput well below the 80 MHz core rate. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical automotive-grade design notes not consolidated in the manufacturer datasheet alone.

USD $3.78 在庫あり

PIC32MX430F064LT-V/TL

PIC32MX430F064LT-V/TL - 80MHz 32-bit MCU, 64KB Flash, USB-OTG | Microchip

The Microchip Technology PIC32MX430F064LT-V/TL is a 32-bit MIPS MCU featuring the MIPS32 M4K core running at 80MHz, 64KB of Flash program memory, and 16KB of SRAM, in a 124-pin VTLA surface-mount package supplied on Tape & Reel. It integrates USB-OTG, two SPI/I2S blocks, two I2C, two UART, an 8-bit PMP, a 10-bit 1 Msps ADC, DMA, and the CTMU capacitive-touch peripheral, giving it a balanced analog and digital mix at a low BOM cost. The 64KB Flash/16KB RAM memory profile suits small-to-mid embedded applications that need USB connectivity without stepping up to higher-density parts in the same family. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on one die. Within the broader taxonomy, MCUs sit under microprocessors, which sit under semiconductors and integrated circuits. The PIC32MX3/4 family specifically targets cost-sensitive 32-bit designs that previously used 16-bit controllers, giving designers an easy migration path with the MPLAB Harmony ecosystem. Key features include 64KB (64K x 8) Flash, 16KB SRAM, up to 80MHz core clock, 5 channels of 10-bit ADC at up to 1 Msps, USB-OTG full-speed, two I2C, two SPI/I2S, two UART, DMA, CTMU for touch/proximity sensing, and an 8-bit PMP for graphics or external memory. The wide 2.5V/3.3V operating range lets it run from a single 3.3V regulator, and the 124-pin VTLA package exposes most peripherals on dedicated pins. The PIC32MX430F064L uses a 5-stage pipelined MIPS32 M4K core with single-cycle hardware multiply/divide and tightly-coupled memory paths for deterministic interrupt latency. The integrated DMA offloads data movement between peripherals and RAM, freeing the core for application logic. The USB-OTG controller includes on-chip transceivers, requiring only an external ESD-protected connector to implement a full-speed device or host port. Typical applications include low-cost USB peripherals, capacitive-touch human-machine interfaces, audio playback with two I2S channels, industrial sensor hubs with PMP, and small graphical HMI panels. The CTMU + ADC combination supports touch buttons, sliders, and proximity sensing without dedicated touch ICs. Designers migrating from PIC24 or PIC32MX1/2 families benefit from drop-in 32-bit performance upgrades. When designing with this device, allocate careful attention to the 124-pin VTLA land pattern and use Microchip's VTLA land pattern specification to avoid thermal and soldering defects. Decouple VDD/VSS pairs with 100 nF ceramic caps placed within 3 mm of each pin pair, and keep trace lengths below 25 mm for USB DP/DM to pass USB compliance. This page combines verified distributor pricing, same-brand drop-in alternatives in matching 124-pin VTLA packages, and practical design notes that go beyond the manufacturer datasheet to help BOM managers and embedded engineers source faster.

USD $4.40 在庫あり

PIC32MX440F128H-80V/PT

PIC32MX440F128H-80V/PT - 80MHz MIPS32 128KB Flash MCU | Microchip

The Microchip PIC32MX440F128H-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 128 KB of Flash and 32 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm, PT). It integrates USB 2.0 Full-Speed On-The-Go with PHY, a 10-bit 1 Msps ADC, and dedicated DMA channels for USB and general peripherals, making it a strong fit for embedded designs that need wired USB connectivity at moderate cost. A PIC32 microcontroller is a 32-bit MCU based on the MIPS instruction set, sitting between 8/16-bit PIC MCUs and higher-end Cortex-M parts. In the broader taxonomy, a PIC32MX belongs to the PIC32 family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The MX series specifically targets cost-sensitive applications that benefit from MIPS32 performance, large Flash/RAM, and integrated USB, while remaining code-compatible with the MPLAB XC32 toolchain and Harmony framework. The PIC32MX440F128H-80V variant offers 128 KB Flash and 32 KB RAM, an 80 MHz core (105 DMIPS), and a peripheral set that includes five 16-bit timers, two I2C, two SPI, two UART, a parallel master port, and a 16-channel 10-bit ADC. The -80V temperature grade covers -40C to +105C industrial operation, and the -80I grade extends to +85C; both share the same 64-pin TQFP pinout, simplifying thermal derating decisions. The MIPS16e instruction mode reduces code size by up to 40%, and the single-cycle 32x32 hardware multiply and divide accelerate DSP-style loops. Typical applications include USB HID/CDC peripherals, industrial control panels, medical device front-ends, sensor hubs with USB diagnostics, and low-cost audio interfaces. The integrated USB OTG PHY eliminates the need for an external transceiver, shrinking BOM and board area for USB dongles and embedded hosts. When designing with this part, place the 64-pin TQFP on a 4-layer PCB with a solid ground pour beneath the exposed pad to dissipate up to ~1 W dissipation at full 80 MHz operation; derate the system clock to 60 MHz if the application requires lower EMI or extended -40C to +105C operation. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX4XX family, and design notes specific to the PT 64-pin TQFP footprint - information not found in the standalone manufacturer datasheet.

USD $4.10 在庫あり

PIC32MX440F128HT-80I/MR

PIC32MX440F128HT-80I/MR - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX440F128HT-80I/MR is a 32-bit MIPS32 M4K microcontroller running at 80 MHz, integrating 128 KB of Flash and 32 KB of SRAM into a 64-pin VQFN (9x9 mm) package with exposed pad. It is part of the PIC32MX4xx family that combines the M4K MIPS core with USB-OTG, 10-bit ADC, and a peripheral set aimed at cost-sensitive embedded applications. Industrial temperature grade (-40C to +85C) is denoted by the trailing 'I'. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and a range of on-chip peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX4xx series sits in the PIC32 family (microcontroller -> 32-bit MCU -> MIPS M4K architecture -> PIC32MX family), offering higher performance than 8-bit PIC16/PIC18 parts while keeping the PIC ecosystem, MPLAB X toolchain, and Harmony firmware library compatibility. Key features of the PIC32MX440F128HT-80I/MR include a 32-bit MIPS M4K core running at 80 MHz (80 MIPS), 128 KB Flash program memory, 32 KB SRAM data memory, an integrated USB 2.0 full-speed On-The-Go (OTG) controller, a 10-bit ADC, and a DMA engine. The device supports 53 digital I/O pins across five I/O ports in the 64-pin VQFN package and operates from 2.5V to 3.6V supply. Code protection is supported via Microchip's standard flash protection bits, and the chip is rated for industrial -40C to +85C operation. Architecturally the PIC32MX440F128H combines a five-stage pipelined M4K core with Harvard-style Flash/SRAM buses, a hardware multiplier/divider, a 10-bit 1 Msps successive-approximate converter with multiple input muxes, dual I2C, dual SPI, dual UART, and an integrated USB-OTG PHY. Peripheral pin select (PPS) on select pins and configurable interrupt priorities make firmware partitioning easier, while DMA offloads repetitive data movement from the core for ADC and USB traffic. Typical applications include USB peripherals and Human Interface Devices (HID), industrial sensor interfaces, motor control front-ends, low-cost graphical user interfaces, and consumer products that benefit from USB connectivity without an external bridge. The 80 MHz headroom and DMA simplify streaming protocols, and the 10-bit ADC is sufficient for many industrial sensing tasks. When designing with this MCU, plan the 64-pin VQFN land pattern with a thermal pad that must be soldered to a ground copper pour for both electrical and thermal performance. Decouple VDD/VDDCORE/USB rails per Microchip's PIC32MX4xx reference design, and reserve a 12 MHz primary crystal plus the 48 MHz USB clock domain per the datasheet. Source-impedance matching on USB DP/DM is required for USB-OTG compliance.

USD $4.30 在庫あり

PIC32MX440F128HT-80V/MR

PIC32MX440F128HT-80V/MR - 80MHz 128KB Flash USB-OTG MCU | Microchip

The Microchip PIC32MX440F128HT-80V/MR is a 32-bit MIPS32 M4K microcontroller operating at 80 MHz with 128 KB Flash and 32 KB SRAM, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. It integrates USB-OTG, a 10-bit ADC, DMA, and a rich peripheral set aimed at connected embedded designs. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, volatile and non-volatile memory, and programmable peripherals around a single silicon die. PIC32MX devices sit in Microchip's MIPS-based portfolio above 8-bit PIC and 16-bit dsPIC families, targeting applications that need higher throughput (80 MHz core, 1.6 DMIPS/MHz) plus full-speed USB connectivity. Within that hierarchy, the MX4xx sub-family adds USB-OTG alongside standard PIC32 peripherals. Key features include 80 MHz maximum CPU clock, 128 KB Flash program memory, 32 KB SRAM, 53 usable I/O pins, USB-OTG full-speed controller, 16-channel 10-bit ADC, up to 5 timer/counters, I2C, SPI, and UART peripherals. The 64-pin VQFN (MR) package includes an exposed thermal pad and supports industrial -40C to +105C ambient operation in the -80V speed/temperature grade. The PIC32MX440 uses the MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide. DMA channels offload data movement between peripherals and memory, freeing the CPU for application code. The USB-OTG controller supports both host and device roles, enabling embedded designs that connect to PCs, hubs, or other USB peripherals without external bridge chips. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control panels with USB diagnostic ports, medical point-of-care devices, audio interfaces with USB streaming, and consumer products requiring on-the-go connectivity to smartphones or tablets. Design consideration: route the 9x9 mm exposed pad (EP) to a contiguous ground copper pour with at least 8 thermal vias to dissipate up to ~1 W internal power and lower junction temperature under sustained USB-OTG host traffic. This page synthesizes distributor pricing, same-package drop-in alternatives, and application design notes not aggregated on the manufacturer datasheet, helping engineers shorten sourcing decisions for PIC32MX440 USB-OTG designs.

USD $4.62 在庫あり

PIC32MX440F128HT-80V/PT

PIC32MX440F128HT-80V/PT - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX440F128HT-80V/PT is a 32-bit MIPS32 M4K microcontroller with 128KB Flash, 32KB RAM, and a USB-OTG full-speed peripheral, operating at up to 80MHz in a 64-pin TQFP (10x10 mm) package. It features a 10-bit ADC, hardware DMA, and 53 user I/O pins, making it a balanced performance MCU for embedded designs that need USB connectivity and substantial code space. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), and peripherals such as ADC, timers, communication interfaces, and I/O. The PIC32MX family uses the MIPS32 M4K core architecture, which sits in the hierarchy of 32-bit RISC processors used in mid-range embedded applications. MCUs are the central processing units in countless embedded systems, from consumer electronics to industrial controllers, where deterministic real-time performance and rich peripheral integration are required. Key features of the PIC32MX440F128HT-80V/PT include 128KB of Flash program memory, 32KB of SRAM, a 10-bit ADC with multiple input channels, a USB 2.0 full-speed On-The-Go peripheral for host or device roles, hardware DMA for offloading data movement, and a wide operating voltage range of 2.3V to 3.6V. The 80MHz core delivers up to 1.56 DMIPS/MHz of computational performance while consuming low power, and the device supports industrial temperature grades depending on variant. At the architecture level, the PIC32MX440F128HT-80V/PT uses a Harvard-style bus architecture with separate instruction and data paths, 5-stage pipeline, and hardware multiply/divide for efficient integer math. The DMA controller can move data between peripherals and memory without CPU intervention, freeing the core for application code. The USB-OTG block adds a high-level interface for connecting to PCs, mass storage, or HID-class peripherals. Typical applications include USB peripherals such as HID input devices, industrial control interfaces, sensor hubs with USB reporting, embedded web/HMI control panels, and motor-control pre-processor boards. The combination of ample Flash and RAM makes it well suited to USB stack libraries and graphic UI implementations. When designing, observe the 80MHz maximum clock and ensure USB trace impedance is controlled per the USB 2.0 full-speed specification; for high-reliability designs, follow Microchip's PIC32MX3xx/4xx family reference designs. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the Microchip PIC32MX portfolio, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate supply options and select a drop-in pin-compatible variant quickly.

USD $4.40 在庫あり

PIC32MX440F128L-80I/BG

PIC32MX440F128L-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

The Microchip PIC32MX440F128L-80I/BG is a 32-bit MIPS M4K microcontroller running at 80 MHz with 128 KB Flash and 32 KB SRAM, housed in a 121-pin TFBGA (10x10 mm) package. It is part of the PIC32MX3XX/4XX family, which combines 32-bit processing performance with USB-OTG and a rich peripheral set for embedded designs. According to the PIC32MX3XX/4XX family datasheet, this device integrates a full-speed USB-2.0 On-The-Go controller alongside the standard PIC32 peripheral mix. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and programmable peripherals. PIC32MX devices specifically use the MIPS32 M4K core, a true 32-bit RISC architecture with hardware multiply/divide and a 5-stage pipeline. Within the broader taxonomy, the PIC32MX family is a 32-bit MCU -> MIPS architecture -> RISC microcontroller -> embedded processor -> semiconductor. The "MX" series is the general-purpose and USB-capable branch, sitting below the "MZ" series that adds higher clock speeds and enhanced peripherals. Key features include 128 KB of Flash program memory (128K x 8), 32 KB of SRAM, and an integrated USB-OTG full-speed controller. The device offers 10-bit ADC, comparators, I2C, SPI, UART, and PMP peripherals, with DMA support for offloading CPU data movement. Industrial temperature range (-40C to +85C) is indicated by the "I" suffix, and the "80" denotes the 80 MHz maximum operating frequency. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control panels, embedded data acquisition with USB logging, and low-cost graphical user interfaces driven by an external PMP-connected display. The combination of USB-OTG and a 32-bit core makes the part well-suited to designs that previously required an external USB controller plus 16-bit MCU. When designing with the TFBGA-121 package, pay attention to PCB layout: route the inner balls out through vias in a dog-bone or via-in-pad pattern, and follow Microchip's recommended decoupling scheme of 0.1 uF + bulk caps per VDD/VUSB rail. Programming is performed via ICSP (PGECx/PGEDx pins) or JTAG. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers select a pin-compatible variant for the PIC32MX440F128L-80I/BG.

USD $5.30 在庫あり

PIC32MX440F128L-80V/BG

PIC32MX440F128L-80V/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG

The Microchip Technology PIC32MX440F128L-80V/BG is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM in a 121-pin TFBGA (10x10 mm) package. It features a USB 2.0 Full-Speed On-The-Go (OTG) peripheral, 10-bit ADC, and the rich PIC32MX peripheral set including SPI, I2C, UART, PMP, and 16-bit timers, suiting it for embedded applications that require both connectivity and deterministic real-time control. A PIC32MX microcontroller is a MIPS-based 32-bit MCU that combines RISC pipeline performance with Microchip's well-established PIC ecosystem, MPLAB X IDE, and Harmony code-generation framework. Within the broader embedded hierarchy, PIC32MX sits between 8/16-bit PIC16/PIC24 MCUs and the higher-end Cortex-M based SAM/dsPIC families, offering a balance of computational throughput, integrated USB, and large memory for general-purpose and USB-enabled designs. Key features of this part include 80 MHz maximum operating frequency, 128 KB Flash (128K x 8), 32 KB SRAM, integrated Full-Speed USB OTG with transceiver, up to 16 ADC channels at 10-bit resolution, multiple serial interfaces, and wide operating voltage support of 2.5 V to 3.6 V. The 121-pin TFBGA exposes the maximum peripheral count of the family, including 85+ digital I/O and dedicated USB D+/D- lines. Architecturally, the PIC32MX4XX family uses the MIPS32 M4K core with hardware multiply/divide, single-cycle 32-bit ALU, and pre-fetch cache for deterministic Flash execution. The USB OTG block includes the physical transceiver, PLL, and full OTG state machine, eliminating external PHY components. Memory is organized with a 32-bit Flash prefetch module and a separate 32 KB SRAM bank for buffered USB and DMA operations. Typical applications include USB peripherals (HID, CDC, MSD), industrial control interfaces, low-cost audio devices, sensor hubs with USB diagnostics, and embedded graphics with PMP. Designers also use PIC32MX440F128L in USB-OTG dual-role designs where the device must act as both host and peripheral. When designing with this part, ensure that the 121-pin TFBGA PCB layout can accommodate 0.65 mm pitch BGA escape routing with proper via-in-pad or microvia stack-up. The internal 8 MHz oscillator with PLL must be configured for the 80 MHz operation, and the USB bus requires a 48 MHz reference derived from the system PLL. This page synthesizes current distributor pricing, drop-in package-compatible alternatives, and engineering design notes not consolidated in the manufacturer datasheet, enabling faster procurement decisions and design-in validation for PIC32MX-based USB products.

USD $4.75 在庫あり

PIC32MX440F128LT-80I/BG

PIC32MX440F128LT-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F128LT-80I/BG is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 121-ball TFBGA package (10x10 mm). It integrates a full-speed USB-OTG controller, a 10-bit 1 Msps ADC, and a rich set of communication peripherals in a single chip. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripherals such as ADC, timers, and communication interfaces. In the embedded hierarchy, the PIC32MX sits at the 32-bit mid-range tier, between 8/16-bit MCUs (PIC16, PIC24) and higher-performance Cortex-M parts. It uses the MIPS32 M4K core - a Harvard-architecture 32-bit RISC processor with single-cycle multiply - and is positioned by Microchip as a bridge from 8/16-bit PIC designs to full 32-bit performance without giving up peripheral compatibility. The device features 128 KB Flash (128K x 8) with self-programmability, 32 KB SRAM, an 80 MHz core with 50 MHz peripheral bus, an on-chip 10-bit 1 Msps ADC with up to 16 channels, two I2C, two SPI, two UART modules, five 16-bit timers/counters, an RTCC, and a USB-2.0 full-speed OTG transceiver with integrated PHY. The I/O count is 85, with 5V-tolerant digital pins. Power input range is 2.3V to 3.6V across industrial temperature (-40C to +85C). The MIPS32 M4K core delivers 1.56 DMIPS/MHz, allowing the 80 MHz part to execute up to 125 DMIPS. The wide peripheral set (USB, CAN optional on family, PMP for graphics/parallel bus) and generous SRAM simplify USB-device, USB-host, and embedded-graphics designs. The integrated USB-OTG transceiver removes the need for an external PHY, saving BOM cost and PCB area in low-cost USB applications. Typical applications include USB peripherals (Human Interface Devices, mass storage, virtual COM ports), embedded control with USB host for barcode scanners or keyboards, industrial sensors with USB diagnostics, low-cost graphics via PMP, and home automation bridges. The PIC32MX4 family is broadly deployed in educational, hobbyist, and low-volume industrial products thanks to MPLAB X IDE and Harmony framework support. When designing with this device, ensure USB impedance-controlled traces (90 ohms differential) and a 12 MHz or 48 MHz crystal reference as required by the USB PLL. The 2.3V to 3.6V supply rules out direct 5V system rails without an LDO. The TFBGA-121 package (10x10 mm, 0.8 mm ball pitch) requires multi-layer PCB and BGA assembly capability - choose the LQFP package variant for hand-solder or low-layer prototypes. This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC32MX3/4 family, and practical design notes beyond what is in the manufacturer datasheet alone.

USD $4.78 在庫あり

PIC32MX440F128LT-80V/PT

PIC32MX440F128LT-80V/PT - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F128LT-80V/PT is a 32-bit MIPS32 M4K microcontroller delivering up to 80 MHz of core performance, integrated with 128 KB of Flash program memory and 32 KB of SRAM, in a 100-pin TQFP (PT) package. The 'L' suffix denotes the 100-pin variant and the 'V' suffix indicates the automotive-grade -40C to +105C operating temperature range, while the 'T' suffix marks tape-and-reel packaging. This part is targeted at USB-OTG-capable embedded designs that demand deterministic real-time performance and ample code space. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. The PIC32MX family uses the MIPS32 M4K architecture, a Harvard-style RISC core known for deterministic instruction timing and excellent code density in C. Within Microchip's product hierarchy, the PIC32MX4xx series sits between the smaller PIC32MX1/2/3 entry-level MCUs and the higher-end PIC32MX5/6/7 USB-OTG devices, offering a balance of peripherals, memory, and cost. Key features include a 10-bit ADC with up to 16 channels, multiple UART/SPI/I2C interfaces, a USB-OTG peripheral, five 16-bit timers/counters, and a parallel master port. The device supports up to 85 general-purpose I/O pins, runs from 2.3V to 3.6V VDD, and includes JTAG and 2-wire ICSP debug interfaces. The instruction cache and prefetch module accelerate Flash execution, while the integrated DMA controller offloads data movement from the CPU. The M4K core uses a 5-stage pipeline with hardware multiply/divide, and the bus matrix provides independent paths for instruction and data fetches. This Harvard architecture allows simultaneous fetch and memory access without contention, which improves throughput versus von Neumann designs at the same clock rate. Hardware-level features such as configurable interrupt priorities and a shadow register set enable fast context switches for real-time control loops. Typical applications include USB peripherals and embedded hosts, industrial control and HMI, automotive body and infotainment modules, point-of-sale terminals, and consumer devices requiring graphical user interfaces. The wide temperature range also makes the -V variant suitable for under-hood automotive subsystems and outdoor industrial equipment. When designing with this device, ensure the 3.3V power rail is well-regulated and bulk-decoupled, and place a 12 MHz crystal with the recommended load capacitors within 10 mm of the OSC1/OSC2 pins. Use the MPLAB XC32 compiler with -O2 optimization to fully leverage the 5-stage pipeline. The automotive-grade temperature window (-40C to +105C) requires derating of Flash endurance if frequent reprogramming is expected. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX4 family, and practical design notes not found in the manufacturer datasheet.

USD $5.10 在庫あり

PIC32MX440F256H-80I/MR

PIC32MX440F256H-80I/MR - 80MHz 32-bit MCU 256KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F256H-80I/MR is an 80 MHz, 32-bit MIPS M4K general-purpose microcontroller with 256 KB Flash and 32 KB SRAM, integrated USB 2.0 On-The-Go (OTG) with on-chip PHY, and 53 general-purpose I/O pins, packaged in a 64-pin QFN (MR, 9x9 mm) form factor. A 32-bit microcontroller (MCU) is an integrated computing system that combines a high-performance processor core with on-chip memory and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIOs. The PIC32MX family is built on the MIPS32 M4K Harvard architecture with a 5-stage pipeline, hardware multiply/divide, and MIPS16e compressed instruction mode, allowing up to 40% smaller code size. The MX4xx sub-family specifically adds an integrated USB 2.0 OTG peripheral with dedicated DMA channels and PHY, distinguishing it from the MX3xx line. Key features include 256 KB single-cycle Flash program memory, 32 KB SRAM data memory, a 10-bit 1 Msps Analog-to-Digital Converter with up to 16 channels, two I2C, two UART, and two SPI/I2S peripherals, five 16-bit timers/counters, an RTCC, and a parallel master port. The device operates from 2.3V to 3.6V across an industrial -40C to +85C temperature range. The 80 MHz CPU delivers up to 105 DMIPS throughput, with single-cycle multiply/divide enabling efficient DSP-class arithmetic. The integrated USB OTG controller with on-chip PHY and dedicated DMA channel eliminates external PHY components, reducing BOM cost and PCB area in USB device, host, or dual-role applications. The Harvard architecture with separate instruction and data buses, combined with a 5-stage pipeline, allows instruction fetch and data load/store to occur in the same clock cycle, delivering sustained performance close to the rated 1.65 DMIPS/MHz/MHz on compute-intensive DSP routines. Typical applications include USB peripherals such as HID/Bulk/CDC devices and USB host controllers, industrial control and Human-Machine Interface (HMI) panels, sensor hubs and data loggers, building automation controllers, and portable consumer electronics. The combination of large Flash, USB OTG, and high-performance 32-bit core is particularly suited for USB-connected embedded products that need significant local compute capability. When designing with this part, allocate at least one 10 uF bulk plus 0.1 uF decoupling capacitor per VDD pin pair, route the USB D+/D- lines as a 90 ohm differential pair with length matching, and follow the recommended crystal/PLL layout from the Microchip PIC32MX3XX/4XX Family Data Sheet to avoid EMI and jitter issues. This page synthesizes distributor pricing, verified drop-in alternatives drawn from the PIC32MX4XX family, and practical design notes not found on the manufacturer product page, giving procurement and engineering teams an actionable view in one place.

USD $5.35 在庫あり

PIC32MX440F256H-80V/MR

PIC32MX440F256H-80V/MR - 80MHz 256KB Flash USB 32-bit MCU | Microchip

The Microchip Technology PIC32MX440F256H-80V/MR is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 32KB RAM, integrated USB-OTG, and a 10-bit ADC, operating at up to 80MHz in a 64-pin VQFN (9x9 mm) package with exposed pad. It is part of the PIC32MX4xx general-purpose USB family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, timers, communication busses). The PIC32MX4xx family targets cost-sensitive embedded designs that need 32-bit performance plus USB host/device/OTG connectivity without the cost of a higher-tier PIC32MZ part. Within the broader taxonomy, this part is a microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family member. Key features include 256KB (256K x 8) Flash program memory, 32KB SRAM, 53 digital I/O pins, 16 channels of 10-bit ADC at up to 1 Msps, four 16-bit timers, two UART, two SPI, two I2C, and a USB 2.0 full-speed/low-speed OTG controller with on-chip transceiver. The 80MHz core delivers 1.56 DMIPS/MHz, ample headroom for control loops, USB stacks, and modest signal processing. Architecturally, the device combines the MIPS32 M4K Harvard bus core with separate Flash and RAM buses, allowing zero-wait-state execution from a 128-bit Flash prefetch cache. The integrated USB OTG PHY eliminates external transceivers for full-speed USB, reducing BOM cost and PCB area in HID, CDC, and mass-storage applications. Typical applications include USB peripherals (CDC serial bridges, HID devices, mass storage), industrial control and HMI panels, consumer appliances with USB diagnostics ports, sensor aggregation hubs, and low-cost graphical user interfaces. The wide 2.3V-3.6V Vdd range and -40C to +105C operating temperature (V-grade) also suit industrial and automotive under-hood sub-systems. When designing, allocate the exposed pad (EP) to a continuous ground plane with multiple thermal vias to keep junction temperature within the 105C industrial limit at full CPU load. Use MPLAB X IDE, MPLAB Harmony v3, or the legacy MPLAB C32 toolchain; the device is supported by PICkit 5, ICD 4, and ICD 3 debuggers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the engineer a faster decision path than a raw datasheet search.

USD $5.74 在庫あり

PIC32MX440F256HT-80I/MR

PIC32MX440F256HT-80I/MR - 32-bit 80MHz MCU 256KB Flash | Microchip

The Microchip PIC32MX440F256HT-80I/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 256 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with industrial temperature grade (-40C to +85C). It integrates USB-OTG, a 10-bit 1 Msps ADC, DMA, and a rich set of peripherals including I2C, SPI, UART, PMP, and RTCC. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, I/O peripherals, and often specialized interfaces. PIC32MX parts sit in the hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded controllers, bridging 8/16-bit PIC and high-performance Cortex-M applications. They are widely used where deterministic real-time performance, USB connectivity, and Microchip's MPLAB X toolchain support are required. Key features of this part include 256 KB Flash (256K x 8), 32 KB SRAM, a 10-bit 16-channel 1 Msps ADC, two I2C, two SPI, two UART, USB-OTG full-speed controller, an 8-bit Parallel Master Port (PMP), five 16-bit timers/counters, DMA controller with 8 channels, and an RTCC module. The 80 MHz core provides 80 MIPS of processing throughput, sufficient for USB stacks, graphics drivers, and protocol conversion. The PIC32MX4XX family uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide and DSP extensions. The dual-bus architecture (instruction fetch and data on separate buses) increases throughput for pointer-heavy code. The peripheral pin-select feature remappable I/O functions to multiple pins, simplifying PCB layout when a constraint conflicts with a default pin assignment. Typical applications include USB peripherals (HID, CDC, vendor class), industrial control panels with graphic LCDs, sensor hubs bridging SPI/UART modbus, audio controllers with PWM output, motor control with quadrature encoders, and general-purpose embedded platforms where 256 KB code space and USB host/device are required. When designing, ensure the USB pins route as a 90-ohm differential pair and that the 64-pin VQFN ground pad is soldered to a continuous ground plane for thermal dissipation. Pull-up resistors on I2C/SDA lines must be sized for the bus capacitance to meet USB-OTG signal-integrity margins. This page synthesizes distributor pricing, drop-in PIC32MX alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.61 在庫あり

PIC32MX440F256HT-80I/PT

PIC32MX440F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX440F256HT-80I/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin TQFP (PT) package measuring 10x10 mm. It is part of the PIC32MX4xx family, which targets applications needing USB 2.0 Full-Speed OTG, a rich peripheral set, and ample code space for graphical or communication stacks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a mix of peripherals such as timers, ADC, communication interfaces, and I/O pins. Within the broader semiconductor taxonomy, an MCU belongs to microcontrollers -> integrated circuits -> semiconductors. The PIC32MX family uses the MIPS32 M4K core, a Harvard-architecture RISC processor capable of 1.56 DMIPS/MHz, positioning it above 8-bit/16-bit MCUs in raw computational throughput for embedded workloads. Key features of this part include 256 KB (256K x 8) Flash, 32 KB SRAM, a Full-Speed USB 2.0 OTG controller, up to 53 general-purpose I/O pins, 16-channel 10-bit ADC with 1 Msps conversion, five 16-bit timers/counters, I2S/SPT for audio, I2C, SPI, and UART peripherals. Supply voltage spans 2.5V to 3.6V, with an industrial operating range of -40C to +85C. An integrated 8 MHz internal oscillator with PLL supports the 80 MHz system clock. Architecturally, the device pairs the M4K core with a dedicated DMA controller and peripheral bus, which can offload data movement for USB, ADC, and SPI transactions. Code protection, a 5V-tolerant digital I/O subset (mapped to specific pins), and JTAG/ICSP debug interfaces are built in. Compared to PIC24/dsPIC parts, this PIC32 offers a 32-bit datapath and deterministic interrupt latency, simplifying porting of RTOS kernels such as FreeRTOS. Typical applications for the PIC32MX440F256HT-80I/PT include USB peripherals (HID, CDC, mass storage), industrial control and HMI panels, audio processing with I2S codecs, sensor hubs, and low-cost graphical user interfaces driving small TFT displays. The 256 KB Flash accommodates moderate-sized protocol stacks (USB, TCP/IP via MLA) plus application code without requiring external memory. When designing with this device, plan I/O assignments carefully: not all pins are 5V-tolerant, and USB D+/D- must be routed as a 90-ohm differential pair. A 12 MHz crystal is recommended for USB Full-Speed compliance, while the internal 8 MHz oscillator suffices for non-USB designs. Decoupling should follow Microchip's recommended 0.1 uF + 1 uF per VDD/AVDD pair. This page synthesizes distributor pricing, same-family drop-in alternatives, and design notes not aggregated on any single distributor listing.

USD $6.20 在庫あり

PIC32MX440F256HT-80V/MR

PIC32MX440F256HT-80V/MR - 32-bit MCU 256KB Flash USB-OTG | Microchip

The Microchip PIC32MX440F256HT-80V/MR is a 32-bit MIPS M4K PIC microcontroller running at 80 MHz with 256 KB of Flash program memory and 32 KB of SRAM, packaged in a 64-pin VQFN (9x9 mm). It integrates a USB 2.0 Full-Speed On-The-Go controller, a 10-bit ADC, multiple UART/SPI/I2C peripherals, and a DMA engine, making it a versatile general-purpose MCU. The 80 MHz core delivers 1.56 DMIPS/MHz performance suitable for embedded control and connectivity. A 32-bit microcontroller is an integrated circuit combining a 32-bit CPU core, program memory (Flash), data memory (RAM), and configurable peripheral set on a single die. Within the PIC32MX family, this part belongs to the USB-equipped MX4xx sub-family, which adds a dedicated USB 2.0 OTG controller and 10-bit ADC compared to the lower-end MX1xx/MX2xx lines. Within the broader taxonomy, it sits as MCU -> embedded controller -> 32-bit microcontroller -> semiconductor, serving as the central processor for real-time embedded systems. Key differentiating features include hardware DMA, RTCC with calendar mode, PMP (parallel Master Port) for graphics/FPGA bridging, and the CIP (Core Independent Peripherals) such as a 16-bit Parallel Master Port and configurable logic cells. The 64-VQFN package exposes up to 53 GPIO pins, supporting mixed 5V/3.3V tolerant I/O for designs that must interface to legacy 5V peripherals. The part uses the MIPS32 M4K microAptiv core, with single-cycle hardware multiply/divide, debug via 2-wire MIPS JTAG or 4-wire standard JTAG, and trace support through the optional Trace Port. The 80 MHz frequency and dual-bus Flash prefetch provide deterministic throughput for protocol stacks such as USB, TCP/IP via soft-MAC, or Modbus. Typical applications include USB HID devices, industrial sensor hubs, motor control FOC loops, USB barcode scanners, and embedded web servers. The wide peripheral set and DMA engine reduce CPU load for high-throughput I/O. For designers, the -80V temperature grade targets industrial 2.5V-3.6V designs; pair with the MPLAB Harmony framework for rapid firmware development. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

USD $2.40 在庫あり

PIC32MX440F256HT-80V/PT

PIC32MX440F256HT-80V/PT - 32-bit 80MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC32MX440F256HT-80V/PT is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 256 KB Flash and 32 KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates USB-OTG, a 10-bit on-chip A/D converter, and CIP (Core Independent Peripherals) that offload timing-critical functions from the CPU. This V-tape-and-reel industrial-grade variant (operating range -40C to +105C) targets USB-connected embedded designs. A PIC32 microcontroller is a 32-bit MCU based on the MIPS32 M4K core architecture, positioned above 8/16-bit families in performance and below ARM Cortex-M series in cost. The PIC32MX family integrates rich peripherals such as USB, CAN, and PMP in single-chip packages, enabling direct USB-host/device connectivity without external bridges. Key features of the PIC32MX440F256HT-80V/PT include 256 KB Flash with 32 KB RAM, 16-bit parallel master port (PMP) for external bus interfaces, up to 5 timers, 2 I2C, 2 SPI, and 2 UART channels. The integrated full-speed USB 2.0 OTG controller with on-chip transceiver eliminates external PHY chips. With 1.56 DMIPS/MHz performance and single-cycle multiply/divide, it executes DSP-like routines efficiently for general-purpose and control applications. The device runs from 2.3V to 3.6V with 5V-tolerant digital inputs and integrates a 10-bit 1 Msps ADC with up to 16 channels. The 80 MHz core, MIPS M4K pipeline, and 32 KB RAM allow mid-range RTOS execution or complex state-machine firmware without external SRAM. Typical applications include USB peripherals (barcode scanners, custom HID, data loggers), industrial control PLCs, low-end HMI panels with PMP-driven LCD, embedded motor control, and consumer audio devices. The USB-OTG feature particularly fits point-of-sale terminals, USB-to-UART converters, and device-mode test instrumentation. The wide operating temperature and robust peripheral set also suit industrial automation, building automation, and medical device peripherals. When designing with this MCU, allocate the 16 KB of boot Flash region reserved by Microchip's firmware update library. Place a 12 MHz crystal with appropriate load capacitors and provide adequate decoupling near VDD/VSS pins. Use the device's internal LDO if 5V-tolerant I/O is required. This page synthesizes distributor pricing, drop-in PIC32MX-family alternatives, and practical design notes not found on a single datasheet page, helping engineers and buyers make informed component decisions for USB-enabled 32-bit embedded designs.

USD $5.21 在庫あり

PIC32MX440F512H-80I/MR

PIC32MX440F512H-80I/MR - 80MHz 32-bit MCU 512KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F512H-80I/MR is a 32-bit MIPS M4K microcontroller operating at 80 MHz (105 DMIPS), integrating 512 KB of Flash and 32 KB of SRAM, with a dedicated USB 2.0 On-The-Go peripheral (including integrated PHY), in a 64-pin VQFN (9x9 mm) package. The core combines a 5-stage pipeline, Harvard architecture, MIPS16e compressed-instruction mode, and single-cycle hardware multiply/divide, delivering up to 40% smaller code size for application firmware. The device operates from 2.3 V to 3.6 V and exposes 53 general-purpose I/O pins alongside dedicated peripherals such as a 10-bit 1 Msps ADC, DMA, I2C, SPI, UART, and PMP. A microcontroller (MCU) is a self-contained processor that integrates CPU, memory, and programmable I/O on a single die, sitting at the lowest level of embedded compute hierarchy (CPU -> MCU -> SoC -> MPU). The PIC32MX4xx family targets general-purpose and USB-connected applications where deterministic real-time control, low BOM cost, and ready USB integration outweigh the need for higher clock rates. It belongs to the broader PIC32 family of MIPS-based MCUs and slots into the larger microcontroller semiconductor category. Key differentiating features include the integrated USB-OTG transceiver (eliminating external PHY cost), 512 KB Flash/32 KB RAM memory density at this price point, hardware DMA supporting USB transfers, and the automotive/industrial -40C to +85C operating range signalled by the -80I temperature grade. The 64-VQFN exposed-pad package provides improved thermal dissipation versus TQFP-64 variants and is suited to compact USB dongle and embedded designs. Architecturally, the part uses a 32-bit MIPS32 M4K core with 5-stage pipeline and Harvard bus, allowing concurrent instruction fetch and data access. The USB-OTG module has a dedicated DMA channel that offloads packet handling from the CPU, freeing cycles for application logic. ICSP programming via PGECx/PGEDx pins enables in-circuit debug with the MPLAB REAL ICE or PICkit 5 toolchains. Typical applications are USB peripherals, embedded audio interfaces, industrial control with USB diagnostics, USB mass-storage devices, and CAN/USB gateway hubs. It suits designs where 512 KB Flash is sufficient for USB stacks plus application code, and where a small QFN footprint matters more than a TQFP pin pitch. When designing with this part, place a 0.1 uF decoupling capacitor adjacent to every VDD/VDDUSB pin and provide a 10 uF bulk capacitor on the main rail. The exposed pad must be soldered to the ground plane for thermal relief. Programming via ICSP requires short, parallel PGECx/PGEDx traces to avoid debug failures. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in alternative MPNs from Microchip's own family, and practical design notes that go beyond what the manufacturer datasheet alone provides.

USD $5.45 在庫あり

PIC32MX440F512H-80I/PT

PIC32MX440F512H-80I/PT - 32-bit MCU 80MHz 512KB Flash USB-OTG TQFP-64

The Microchip PIC32MX440F512H-80I/PT is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 512 KB Flash and 32 KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates USB 2.0 On-The-Go with PHY, dedicated DMA, and a 10-bit ADC. A 32-bit MCU (microcontroller unit) is a single-chip computer that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces). PIC32 microcontrollers are part of the MIPS32 family, positioning them above 8-bit PIC MCUs and below 32-bit Cortex-M ARM devices in the embedded hierarchy. They are well suited for USB, graphics, and connectivity applications requiring deterministic real-time behavior combined with high throughput. Key features of the PIC32MX440F512H-80I/PT include 80 MHz / 105 DMIPS CPU performance, 512 KB Flash program memory, 32 KB SRAM data memory, integrated USB-OTG with PHY, 5-stage pipeline Harvard architecture, MIPS16e code compression for up to 40% smaller code, hardware multiply/divide unit, 16-bit wide instructions, dedicated DMA controller, and a 10-bit ADC with up to 1 Msps sampling. The architecture combines a 5-stage pipeline, Harvard bus layout, and a high-bandwidth peripheral bus. The on-chip DMA engine can move data between peripherals and memory without CPU intervention, freeing the core for control loops and protocol handling. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM cost on USB-equipped embedded products. Typical applications include industrial control panels, USB peripherals (HID, CDC, mass storage), embedded graphics with external TFT controllers, automotive body electronics, point-of-sale terminals, medical instrumentation, and consumer audio devices. The wide operating voltage range (2.3 V to 3.6 V) simplifies battery-powered designs. When designing with this device, ensure that the ICSP trace length between the programming connector and the PGECx/PGEDx pins is minimized to maintain reliable in-circuit serial programming. Decoupling capacitors (0.1 uF + bulk) must be placed close to VDD/AVDD pins. This page synthesizes distributor pricing, drop-in compatible alternatives from the same PIC32MX family, and practical design notes not found in the standalone datasheet to accelerate your component selection.

USD $8.55 在庫あり

PIC32MX440F512H-80V/MR

PIC32MX440F512H-80V/MR - 80MHz USB 32-bit MCU 512KB Flash | Microchip

The Microchip PIC32MX440F512H-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash and 32 KB SRAM, integrating a USB 2.0 On-The-Go (OTG) full-speed peripheral with integrated PHY, all housed in a 64-pin VQFN (9x9 mm, MR) package. It belongs to the PIC32MX3XX/4XX general-purpose family and operates from 2.5V or 3.3V. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals such as timers, communication interfaces, ADCs, and I/O. The PIC32MX family specifically implements the MIPS32 M4K core with a 5-stage pipeline, single-cycle hardware multiply, and MIPS16e code compression for up to 40% smaller code size. Microcontrollers sit within the broader semiconductor hierarchy as a sub-category of embedded processors, optimized for deterministic real-time control with low power consumption. Key features include a dedicated DMA channel for USB OTG, a 10-bit ADC with up to 16 channels, five 16-bit timers/counters, four ICSP/I²C/SPI/UART peripherals, and a Parallel Master Port. The USB OTG controller and integrated transceiver allow direct device/host/OTG connectivity without an external PHY, reducing BOM cost and PCB footprint. The 80 MHz / 105 DMIPS core delivers high computational throughput for protocol stacks, digital signal processing, and graphical user interfaces. Typical applications include USB peripherals (HID, CDC, mass storage, audio), embedded web servers, industrial control nodes with on-board monitoring, and consumer electronics with USB connectivity such as point-of-sale terminals, medical instruments, and gaming controllers. Design considerations: the -80V temperature grade supports 0°C to +85°C (V suffix is commercial-grade) versus -40°C to +85°C for the I grade; verify the operating environment before selection. The 64-pin VQFN package has an exposed thermal pad that must be soldered to a sufficient copper pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not aggregated on the manufacturer datasheet alone, helping procurement and embedded engineers select and source the part efficiently.

USD $5.75 在庫あり

PIC32MX440F512HT-80I/MR

PIC32MX440F512HT-80I/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX440F512HT-80I/MR is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 512 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates USB-OTG, a 10-bit ADC with up to 16 channels, multiple PWM and timer peripherals, and up to 53 general-purpose I/O pins for embedded connectivity and control designs. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range. A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip that bridges 8/16-bit PIC designs and full 32-bit Cortex-class processing. Within the broader taxonomy, it belongs to microcontrollers > 32-bit microcontrollers > MIPS RISC microcontrollers > embedded processors > semiconductors. The PIC32MX family uses the MIPS32 M4K core with single-cycle multiply/divide hardware, a 5-stage pipeline, and a 32-bit instruction set compatible with the MIPS32 ISA, while retaining peripheral IP and toolchain familiarity from earlier PIC microcontrollers. Key features of the PIC32MX440F512HT-80I/MR include 80 MHz maximum CPU clock, 512 KB Flash with 32 KB RAM, USB 2.0 full-speed On-The-Go, a 16-channel 10-bit ADC with 1 Msps conversion, four 16-bit timers/counters, five PWM channels with input capture, two I2C and two UART/I2S peripherals, and parallel master port (PMP) for external bus expansion. The 64-pin VQFN package provides 53 digital I/O pins plus dedicated oscillator, programming/debug (PGECx/PGEDx), and supply pins. The "T" suffix denotes tape-and-reel packaging; the "I" suffix denotes industrial temperature grade. Architecturally, the PIC32MX440 integrates the M4K CPU, prefetch cache, dual-bank Flash with runtime self-programmability, DMA controller, and peripheral bus bridge on a single die. The 80 MHz core delivers 1.56 DMIPS/MHz and supports code execution directly from Flash via a 16-entry instruction cache, easing real-time control loops. The integrated USB-OTG PHY removes the need for an external transceiver in USB device/host/OTG designs. Typical applications include USB peripherals (HID, CDC, MSD, audio), industrial control HMI, low-cost graphical LCD interfaces, home automation gateways, and embedded data loggers. The USB-OTG integration suits the part to connected-device designs where a discrete USB PHY would inflate BOM cost. When designing with this device, pay attention to decoupling (100 nF + bulk capacitor at each VDD pin pair), trace length matching for the USB DP/DM differential pair (90 ohms), and adequate thermal relief on the exposed pad of the VQFN. The ICSP pins (PGECx/PGEDx) should be brought to a header for in-circuit programming. This page synthesizes distributor pricing, drop-in package-matched alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6.20 在庫あり

PIC32MX440F512HT-80V/MR

PIC32MX440F512HT-80V/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX440F512HT-80V/MR is a 32-bit MIPS32 M4K microcontroller integrating 512 KB Flash, 32 KB RAM, a USB-OTG full-speed peripheral, and a 10-bit ADC, housed in a 64-pin 9x9 mm VQFN (MR) package with exposed thermal pad. It runs at 80 MHz core clock delivering 1.56 DMIPS/MHz (Dhrystone 2.1) and supports industrial temperature range operation. The device combines DSP-like signal processing throughput with the simplicity of a microcontroller and the connectivity of an integrated USB-OTG transceiver. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program and data memory, peripherals (timers, ADC, communication interfaces), and interrupt logic. PIC32MX4xx parts sit within the wider PIC32 family, between the entry-level PIC32MX1xx/2xx and the higher-end PIC32MX5xx/6xx/7xx series. They target cost-sensitive embedded designs needing 32-bit performance, USB connectivity, and ample code space without the cost of larger Flash/RAM variants. Key features include 512 KB single-voltage Flash with live update support, 32 KB SRAM, 16-channel 10-bit 1 Msps ADC, five 16-bit timers, two I2C, two SPI, two UART, USB-OTG full-speed with on-chip transceiver, four-input DMA controller with 4 KB DMA RAM, and parallel master port. Hardware multiply/divide and a 5-stage pipeline accelerate DSP-oriented firmware. The MR suffix denotes the 64-pin 9x9 mm VQFN with EPAD. Typical applications include USB peripherals and HID devices, industrial control panels, sensor hubs, low-cost audio processing, embedded web servers, and USB-to-UART bridges. The integrated USB-OTG transceiver eliminates external PHY cost on USB-device and embedded-host designs. Industrial-rated silicon (-40C to +105C junction in V-temp parts) supports factory-floor equipment. When designing with this part, allocate a sufficient bulk decoupling capacitor (4.7-10 uF) on VDDCORE and individual 0.1 uF ceramics on each AVDD/AVSS pair. Maintain trace length matching on USB DP/DM to within 4 mm to comply with USB 2.0 FS signal-integrity requirements. Use the parallel master port (PMP) carefully - pin remapping is limited compared to the GPIO. This page synthesizes distributor stock, parametric alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.25 在庫あり

PIC32MX440F512HT-80V/PT

PIC32MX440F512HT-80V/PT - 512KB Flash 80MHz MCU | Microchip

The Microchip Technology PIC32MX440F512HT-80V/PT is a 32-bit MIPS MCU from the PIC32MX4xx family featuring 512KB Flash, 32KB RAM, and USB-OTG, housed in a 64-pin TQFP (10x10mm) package. It runs at 80MHz core clock, includes a 10-bit ADC, DMA controller, and operates from 2.3V to 3.6V. This is the tape-and-reel / industrial -40C to +105C variant of the PIC32MX440F512H silicon. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory (Flash + SRAM), and peripherals on a single die. PIC32MX parts use the MIPS32 M4K core, which executes the MIPS instruction set at up to 80MHz with 5-stage pipeline and hardware multiply/divide. Within Microchip's taxonomy, PIC32MX sits above PIC24 (16-bit) and below the PIC32MZ/MK families, and is widely deployed in industrial, consumer, and USB-connected embedded systems. Key features of this part include USB-OTG (Full-Speed, with internal transceiver), 16-channel 10-bit ADC (1 MSPS), up to 5 UART/SPI/I2C peripherals, parallel master port (PMP) for graphics/parallel memories, and CTMU for capacitive touch. The 512KB Flash supports self-programmability for bootloader and field updates, and 32KB SRAM is enough for typical TCP/IP stacks or graphics frame buffers in mid-range designs. The PIC32MX4xx family uses a Harvard architecture with separate 32-bit instruction and 32-bit data paths, and integrates a prefetch cache to mask Flash wait-states. An integrated 8MHz internal RC oscillator with PLL provides flexible clocking. The 64-TQFP package exposes nearly all I/O (53 I/O pins) plus USB D+/D-, making it ideal for medium-pin-count USB-connected designs. Typical applications include industrial USB peripherals, point-of-sale (POS) terminals, embedded web/HMI servers using TCP/IP stacks, USB OTG device/host bridges, and human-machine interface (HMI) panels. Its combination of USB-OTG, large Flash, and 10-bit ADC makes it a workhorse for cost-sensitive industrial connectivity. When designing with this device, allocate at least 4.0Vcc capacitance (10uF + 0.1uF + 0.01uF) close to VDD/VSS pairs, and use the on-chip LDO (ENVREG pin tied high) to generate the internal 1.8V core rail from a single 3.3V supply. Programming/debugging uses 2-wire ICSP (PGECx/PGEDx); keep these traces short to avoid noise coupling. This page consolidates distributor pricing, verified drop-in alternatives from the same PIC32MX4xx family, and practical design notes not found on a single source page, helping engineers evaluate sourcing options quickly.

USD $6.05 在庫あり

PIC32MX450F128H-I/MR

PIC32MX450F128H-I/MR - 80MHz 128KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX450F128H-I/MR is a 32-bit MIPS microcontroller from the PIC32MX3/4 family featuring an 80 MHz MIPS32 M4K core, 128 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (MR) package with 9x9 mm body and exposed thermal pad. The device integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS) for flexible peripheral routing, and a Parallel Master Port (PMP) for graphics interfaces. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, Flash program memory, SRAM data memory, and a rich set of peripherals (timers, ADC, communication controllers) on one silicon die. The PIC32MX family uses the MIPS32 architecture with the M4K microAptiv core, providing 1.56 DMIPS/MHz performance. Within the broader microcontroller hierarchy, the PIC32MX3/4 line sits between 8-bit PIC16/PIC18 devices and 32-bit Cortex-M based MCUs, offering higher performance than 8-bit parts with simpler toolchains than ARM Cortex-M. Key features include 128 KB Flash, 32 KB SRAM, up to 53 available I/O pins via Peripheral Pin Select, a 10-bit 1 Msps ADC with up to 28 input channels, two analog comparators, two I2C, two SPI/I2S, two UART modules, and a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. The CTMU enables capacitive touch buttons, sliders, and proximity sensing without external analog ICs. The PIC32MX450F128H-I/MR operates from 2.3V to 3.6V, supports -40C to +85C industrial temperature range, and offers 5V-tolerant digital I/O. The integrated USB 2.0 Full-Speed OTG controller supports device, host, and On-The-Go modes, eliminating the need for an external USB transceiver. The Peripheral Pin Select feature allows most digital peripherals to be remapped to any of several I/O pins, simplifying PCB layout. Typical applications include USB peripherals (HID, CDC, mass storage), audio interfaces using I2S, graphics with PMP-driven TFT panels, capacitive touch HMI using CTMU, industrial control with CAN-free connectivity, and consumer embedded devices requiring USB connectivity. The wide peripheral integration reduces external component count and BOM cost in connected embedded products. Designers should note the 64-pin VQFN (MR) footprint has an exposed thermal pad that must be soldered to the PCB ground plane for proper thermal dissipation and electrical performance. The 9x9 mm body allows routing escape for the 53 I/O signals. Decoupling capacitors (100 nF + 4.7 uF) must be placed within 3 mm of each VDD/VSS pair to ensure stable core and I/O operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4.10 在庫あり

サブカテゴリ

製品 (32725)

PIC32MX430F064LT-I/TL - 80MHz 32-bit MIPS MCU, 64KB Flash | Microchip

PIC32MX430F064LT-V/PT - 80MHz 32-bit MCU 64KB Flash | Microchip

PIC32MX430F064LT-V/TL - 80MHz 32-bit MCU, 64KB Flash, USB-OTG | Microchip

PIC32MX440F128H-80V/PT - 80MHz MIPS32 128KB Flash MCU | Microchip

PIC32MX440F128HT-80I/MR - 80MHz 32-bit MCU 128KB Flash | Microchip

PIC32MX440F128HT-80V/MR - 80MHz 128KB Flash USB-OTG MCU | Microchip

PIC32MX440F128HT-80V/PT - 80MHz 32-bit MCU 128KB Flash | Microchip

PIC32MX440F128L-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

PIC32MX440F128L-80V/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG

PIC32MX440F128LT-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

PIC32MX440F128LT-80V/PT - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

PIC32MX440F256H-80I/MR - 80MHz 32-bit MCU 256KB Flash USB-OTG | Microchip

PIC32MX440F256H-80V/MR - 80MHz 256KB Flash USB 32-bit MCU | Microchip

PIC32MX440F256HT-80I/MR - 32-bit 80MHz MCU 256KB Flash | Microchip

PIC32MX440F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip

PIC32MX440F256HT-80V/MR - 32-bit MCU 256KB Flash USB-OTG | Microchip

PIC32MX440F256HT-80V/PT - 32-bit 80MHz 256KB Flash MCU | Microchip

PIC32MX440F512H-80I/MR - 80MHz 32-bit MCU 512KB Flash USB-OTG | Microchip

PIC32MX440F512H-80I/PT - 32-bit MCU 80MHz 512KB Flash USB-OTG TQFP-64

PIC32MX440F512H-80V/MR - 80MHz USB 32-bit MCU 512KB Flash | Microchip

PIC32MX440F512HT-80I/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

PIC32MX440F512HT-80V/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

PIC32MX440F512HT-80V/PT - 512KB Flash 80MHz MCU | Microchip

PIC32MX450F128H-I/MR - 80MHz 128KB Flash 32-bit MCU | Microchip