集積回路

PIC32MZ1024ECH064-I/PT

PIC32MZ1024ECH064-I/PT - 200MHz 32-bit MCU, 1MB Flash, Ethernet | Microchip

The Microchip Technology PIC32MZ1024ECH064-I/PT is a high-performance 32-bit MIPS32 microAptiv-based microcontroller running at 200 MHz with 330 DMIPS, integrating 1 MB of Flash and 512 KB of SRAM into a 64-pin TQFP (10x10 mm) package. It delivers dual-panel Flash for live-update field firmware upgrades, 10-bit 500 KSPS 24-channel analog conversion, and a rich communications peripheral set including HS USB, Ethernet MAC, CAN 2.0B, SQI, UART, SPI, I2C, I2S, and PMP for audio/graphics interfaces. What is a PIC32MZ microcontroller? A PIC32MZ is a 32-bit RISC microcontroller built on the MIPS microAptiv core, designed by Microchip Technology for embedded connectivity applications. In the broader taxonomy it sits at MCU > 32-bit MCU > RISC MCU > connectivity MCU > high-performance MCU, and is positioned for applications that need DSP, Ethernet, USB, and large memory footprints in a single device. The 'EC' family specifically emphasizes Ethernet connectivity alongside the full peripheral suite, while the 'H' flash-density suffix denotes 1 MB of program memory. Key differentiating features of this part include 200 MHz / 330 DMIPS compute performance with single-cycle MAC and four 64-bit accumulators for DSP workloads, microMIPS mode delivering up to 35% code compression to maximize the 1 MB Flash, and a Memory Management Unit (MMU) supporting embedded OS execution such as FreeRTOS or openRTOS. The dual-panel Flash architecture allows in-field firmware swap without downtime. Typical applications span industrial IoT gateways, Ethernet-enabled PLC controllers, automotive infotainment sub-systems, building automation bridges, and audio/graphics HMI panels. When designing, ensure the trace impedance for the Ethernet MAC differential pair meets IEEE 802.3 requirements, and provide a 24 MHz crystal reference within the recommended load capacitance tolerance to keep the USB HS PLL locked. This page consolidates distributor pricing, drop-in alternatives, and design considerations not packaged on the manufacturer's product page.

USD $7.20 在庫あり

PIC32MZ1024ECH064T-I/MR

PIC32MZ1024ECH064T-I/MR - 200MHz 1MB Flash MCU 64-QFN | Microchip

The Microchip Technology PIC32MZ1024ECH064T-I/MR is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 200 MHz with 1 MB Flash and 512 KB SRAM, housed in a 64-pin 9x9 mm QFN package with exposed thermal pad. The "/MR" suffix indicates the 64-VFQFN package and the "T" suffix indicates tape-and-reel packaging, while "-I" denotes the industrial -40°C to +85°C temperature grade. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, and a rich set of peripherals (USB, Ethernet, CAN, ADC, timers, GPIOs) into a single semiconductor device. The PIC32MZ ECH family sits at the high end of Microchip's PIC32 lineup, combining the microAptiv core with on-chip HS USB, Ethernet MAC, CAN, and a 12-bit 18-channel ADC — making it suitable for industrial, audio, and graphics HMI applications. Key features of this specific device include 200 MHz core speed delivering up to 330 DMIPS / 3.3 VCore (DMIPS/MHz = 1.65), 1 MB (1M x 8) Flash with live-update capability, 512 KB SRAM, and 64 KB data Flash. Integrated peripherals include a 10/100 Ethernet MAC, two CAN 2.0b controllers, Hi-Speed USB 2.0 (480 Mbps) host/device/OTG, a 12-bit 18-channel ADC at 1.2 Msps, and a dedicated audio I²S interface. The chip also has 53 GPIO, 8 DMA channels, 9 timers, and a 4-wire JTAG programming/debug port. The PIC32MZ1024ECH family uses a superscalar MIPS microAptiv (M4K) core with MMU support and DSP extensions, allowing efficient C code execution and Linux-capable RTOS deployment. The 1.2V internal core regulator generates VCORE from a single 3.3V rail, simplifying PCB design while the wide 2.3V–3.6V operating range suits industrial 24V-bus-derived supplies. Typical applications include industrial control HMI panels, audio DAC/amplifier control, Ethernet/CAN gateway nodes, USB-based instrumentation, and graphics display controllers with resistive-touch sensing. The combination of Ethernet + USB OTG + CAN makes it a strong fit for industrial IoT edge nodes. When designing with this part, ensure the exposed pad is soldered to a continuous ground copper pour of at least 25 mm² to meet thermal and electrical performance. Decouple VCORE / VDD with 100 nF + 4.7 µF ceramics placed within 5 mm of the pins, and use the internal 1.2V regulator's required 4.7 µF output capacitor. JTAG/SWD trace lengths should remain under 50 mm for reliable debug operation. This page synthesizes real-time distributor pricing, drop-in package alternatives, and practical PCB design notes drawn from Microchip's PIC32MZ1024ECH datasheet family — content not consolidated on any single distributor page.

USD $8.55 在庫あり

PIC32MZ1024ECH064T-I/PT

PIC32MZ1024ECH064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECH064T-I/PT is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller featuring 1MB (1024 KB) of Flash program memory and 512 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm) footprint. It operates at a maximum core clock of 200 MHz, integrates HS USB, Ethernet, and CAN connectivity, and is supported by Microchip's MPLAB Harmony development ecosystem. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program memory, data RAM, and a rich set of peripherals into one package. The PIC32MZ family sits within Microchip's broader PIC32 lineup (8-bit PIC -> 16-bit PIC24 -> 32-bit PIC32 -> PIC32MZ -> high-performance MCU tier) and is positioned for connected embedded applications requiring both DSP-class performance and integrated wired connectivity. Key features include a MIPS32 microAptiv core with 200 MHz max frequency (252 MIPS), 1 MB Flash with live-update dual-partition support, 512 KB SRAM, an 8-channel DMA controller, 5V-tolerant I/O with 32 mA source/sink, selectable open-drain/pull-up/pull-down on every pin, and external interrupts on all general-purpose I/O. Integrated peripherals include HS USB 2.0, 10/100 Ethernet MAC, CAN 2.0B, up to six UART/SPI/I2C, a 12-bit 5 MSPS ADC up to 48 channels, and a Class B Safety Library (IEC 60730) for functional-safety code. Architecturally, the device uses a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and DSP extensions. The on-chip FPU is absent on this ECH (Embedded Connectivity) variant; the EF family replaces it with a hardware Floating-Point Unit running at 252 MHz. The dual-bank Flash enables Live-Update firmware upgrades without service interruption, a critical feature for industrial Ethernet and IoT edge nodes. Typical applications include industrial Ethernet gateways, HS USB audio/video peripherals, automotive infotainment and body controllers, IoT edge nodes with TLS, CAN-connected industrial sensors, and graphics HMI with external LCD controllers. The wide operating temperature range (-40C to +85C industrial grade) and 5V-tolerant digital I/O simplify interfacing to legacy 5V logic. When designing with this device, allocate a 2 kB Flash page for the bootloader and reserve at least one dual-bank partition pair for Live-Update. Bypass VDD with 0.1 uF plus 10 uF ceramic capacitors placed within 5 mm of each supply pin, and follow Microchip's 64-pin TQFP LAN-keeper layout guidelines for the Ethernet PHY-MAC interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor product page, giving procurement and firmware engineers one consolidated reference.

USD $8.05 在庫あり

PIC32MZ1024ECH100-I/PF

PIC32MZ1024ECH100-I/PF - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024ECH100-I/PF is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, built around the MIPS32 microAptiv core and housed in a 100-pin TQFP (14x14 mm) package. Key headline specifications: 200 MHz maximum CPU clock with 330 DMIPS performance, 1 MB (1024 KB) of Flash program memory, 512 KB of SRAM data memory, and a hardware Crypto Engine. The device is supplied from a 2.3V to 3.6V rail and operates across the -40C to +85C industrial temperature range. A PIC32MZ microcontroller is a 32-bit MCU that combines a MIPS32 RISC core with extensive connectivity peripherals, designed for industrial and consumer applications requiring both DSP performance and rich communication interfaces. The microAptiv core extends the MIPS instruction set with DSP enhancements including four 64-bit accumulators and single-cycle MAC operations. The PIC32MZ family belongs to the broader 32-bit microcontroller hierarchy: 32-bit MCU -> RISC microcontroller -> embedded processor -> semiconductor. The EC sub-family adds high-speed connectivity peripherals such as 10/100 Ethernet MAC, USB 2.0 high-speed OTG, and CAN, making it suitable for networked embedded systems. The differentiating features of the PIC32MZ1024ECH100 include its 1 MB Flash paired with a 160 KB auxiliary Flash region, a hardware Crypto Engine for AES/HSM/SHA acceleration, and a rich peripheral set including multiple UART, SPI, I2C, CAN, and HS USB plus Ethernet. The 200 MHz core delivers 330 DMIPS, while the integrated FPU (when present) supports IEEE 754 single and double precision. The device integrates a high-performance 12-bit ADC at up to 1 MSPS and multiple 16-bit timers, supporting motor control and mixed-signal designs. Architecturally, the device implements the MIPS microAptiv core with DSP extensions, four 64-bit accumulators, and single-cycle MAC, giving it DSP-class signal processing capability. The integrated Crypto Engine supports AES, DES, 3DES, SHA-1, SHA-256 and MD5, plus true RNG and HMAC - accelerating TLS/DTLS handshakes and secure boot implementations. Memory is organized with 1 MB main Flash, 160 KB auxiliary Flash, and 512 KB SRAM, accessible through a multi-port bus matrix that keeps DMA traffic off the CPU. Typical applications include industrial Ethernet gateways and IIoT nodes, USB-to-Ethernet bridges, automotive infotainment and telematics subsystems, secure connected devices, and graphics HMI terminals. The device is also used in PLCs, building automation controllers, and motor control front-ends. Microchip recommends the PIC32MZ1024EFH100 for new designs, as the EC family has been superseded by the EF family with higher 252 MHz performance and similar connectivity. When designing with this MCU, ensure proper decoupling with 100 nF ceramic capacitors on every VDD/VSS pin pair and bulk 10 uF capacitors on each power domain. Trace length matching is critical for the HS USB and Ethernet differential pairs (D+/D- and TX/RX). Developers should use MPLAB Harmony 3 to take advantage of the integrated Crypto Engine and the multi-port DMA engine, which offloads packet and crypto work from the CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All data is verified against Microchip and authorized distributors as of 2026-10-04.

USD $8.74 在庫あり

PIC32MZ1024ECH100-I/PT

PIC32MZ1024ECH100-I/PT - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECH100-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ ECH family, operating at up to 200 MHz with a MIPS32 microAptiv core. It integrates 1 MB of Flash program memory and 512 KB of SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. The device supports 3.3V operation and includes integrated 10/100 Mbps Ethernet MAC and Crypto Accelerator peripherals, targeting secure connected embedded applications. A 32-bit PIC microcontroller is a member of the microcontroller (MCU) family of integrated circuits - small, self-contained computing systems that combine a CPU core, program and data memory, and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PIC32MZ family is Microchip's high-performance branch of the PIC32 portfolio (32-bit MIPS), positioned above the PIC32MX series and below the SAME70/SAMV71 (Cortex-M7) class in compute throughput. The ECH sub-family adds a dedicated Ethernet MAC and a hardware Crypto Accelerator to the baseline PIC32MZ EF feature set. Key features include a 200 MHz core clock with hardware multiply/divide and DSP extensions, dual 12-bit ADC modules, multiple UART/SPI/I2C/CAN interfaces, an integrated 10/100 Ethernet MAC, a hardware Crypto Accelerator for AES/SHA/TDES, and an Enhanced Parallel Master Port (EPM) for external memory. The 100-pin TQFP package exposes up to 78 user I/O lines. An integrated FPU is not present on the ECH sub-family; floating-point is handled in software unless an FPU-equipped PIC32MZ EF or PIC32MZS variant is selected. Typical applications include industrial Ethernet nodes (PROFINET, EtherCAT slave, Modbus TCP), secure IoT gateways, graphical HMI controllers, building automation bridges (BACnet, KNX/IP), motor control with CAN, and USB- or Ethernet-connected medical instrumentation. The Crypto Accelerator offloads TLS handshake steps, while the Ethernet MAC combined with the large SRAM enables on-chip TCP/IP stacks without an external PHY controller. When designing with this device, allocate decoupling as one 100 nF ceramic per VDD/VDDIO pin pair plus a single 4.7 uF bulk near the regulator. The Ethernet MAC requires an external 50 MHz oscillator or 25 MHz crystal plus magnetics; leave room for a PHY footprint. Trace the trace impedance-controlled RMII/RGMII pair to 50 ohms on at least the top layer. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ family, and practical design notes that complement the manufacturer datasheet's content.

USD $8.95 在庫あり

PIC32MZ1024ECH100T-I/PF

PIC32MZ1024ECH100T-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECH100T-I/PF is a high-performance 32-bit MIPS32 microAptiv MCU running at 200 MHz (330 DMIPS), integrating 1 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The device combines a deterministic single-cycle MAC DSP engine with four 64-bit accumulators, microMIPS code compression, and Dual Panel Flash for live field updates, making it a workhorse for connected industrial and embedded-OS designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals. The PIC32MZ family extends this concept with a 32-bit MIPS core that delivers 1.5 DMIPS/MHz, a hardware Memory Management Unit (MMU) for embedded OS support, and high-speed connectivity peripherals such as Ethernet, CAN, USB, and SQI. The PIC32MZ1024ECH100T-I/PF sits at the high-integration end of the family, where 1 MB of Flash enables full TCP/IP stacks, graphics libraries, and safety firmware to coexist in one device. Key features of this part include a 200 MHz core clock, 1 MB (1M x 8) Flash program memory, 512 KB SRAM, a 10-bit 500 KSPS 40-channel ADC, dual CAN 2.0b modules, 10/100 Ethernet MAC, USB 2.0 high-speed OTG, SQI interface for external serial Flash/XIP, six UART, four SPI, five I2C, PMP/EBI, and two I2S ports for audio. A built-in 8-channel DMA, four 64-bit accumulators, and DSP-enhanced instructions let signal-processing tasks run without burdening the CPU. Typical applications include industrial HMI panels with TFT displays, factory automation controllers with EtherCAT/CANopen bridges, connected IoT gateways with on-chip Ethernet, medical patient-monitoring devices requiring deterministic DSP, automotive infotainment and telematics modules, and embedded-OS platforms running FreeRTOS, OpenRTOS, or Micrium on top of the MMU. The 100-pin TQFP footprint is also convenient for hand-rework prototypes and low-cost four-layer PCBs. When designing with the PIC32MZ1024ECH100T-I/PF, ensure a stable 3.3 V core supply and respect the 200 MHz maximum clock; bypass capacitors must be placed within 3 mm of each VDD/VSS pair, and the SQI lines should be length-matched if the external serial Flash is used for XIP. The pin-compatible -I/PF (non-T) variant is recommended for production runs that do not require tape-and-reel packaging.

USD $8.40 在庫あり

PIC32MZ1024ECH100T-I/PT

PIC32MZ1024ECH100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024ECH100T-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity (EC) family, featuring a 200 MHz microAptiv core delivering 330 DMIPS with DSP extensions and four 64-bit accumulators. It integrates 1024 KB Flash program memory, 512 KB SRAM, and 160 KB auxiliary Flash, paired with a hardware crypto engine, in a 100-pin TQFP (12x12 mm) package. The "T" suffix denotes Tape and Reel packaging, and "I/PT" indicates the industrial temperature grade (-40C to +85C) in a TQFP package. What is a PIC32MZ microcontroller? A PIC32MZ is a 32-bit MIPS-based microcontroller from Microchip that sits in the PIC32 family hierarchy: PIC32MX (entry-level, 80 MHz) -> PIC32MZ EC (connectivity, 200 MHz, hardware crypto) -> PIC32MZ EF (graphics/HMI, 252 MHz). PIC32MZ EC devices target industrial connectivity applications requiring Ethernet, CAN, USB, and cryptographic acceleration, filling the role of high-performance industrial microcontrollers within Microchip's broader MCU portfolio alongside dsPIC and SAM devices. Key features include an integrated 10/100 Ethernet MAC, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, multiple SPI/I2C/UART interfaces, a 12-bit 500 ksps ADC, and a parallel master port for external memory expansion. The 4-wire SPI with dedicated I/O enables high-throughput communication with external peripherals and serial Flash. The crypto engine accelerates AES, 3DES, SHA, MD5, and RNG operations, offloading these workloads from the CPU. Programmable DMA channels and a 32-channel interrupt controller support deterministic real-time response. The microAptiv core implements the MIPS32 Release 2 instruction set with DSP ASE, single-cycle multiply-accumulate, and hardware divide, achieving 1.65 DMIPS/MHz. The 5-stage pipeline and dual-set associative prefetch buffer deliver sustained 200 MHz operation with low interrupt latency, making the part suitable for deterministic control and signal processing applications. Memory is arranged with separate bus paths for instruction and data, supporting zero-wait-state Flash execution from cache. Typical applications include industrial Ethernet gateways, building automation controllers, motor control drives, medical instrumentation with secure connectivity, automotive infotainment sub-systems, IoT edge nodes with TLS acceleration, and graphics HMI panels. The combination of hardware crypto and dual CAN makes it especially suited to industrial networking nodes that require secure cloud connectivity plus fieldbus gateway capability. Key design consideration: the PIC32MZ1024ECH100 has been superseded by the PIC32MZ1024EFH100 for new designs, which runs at 252 MHz with the same peripheral set. Existing ECH100 designs remain supported but should consider migration. Operating voltage is 2.3V to 3.6V with dedicated analog and digital supply pins that require proper decoupling. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet, enabling engineers to make informed sourcing and migration decisions.

USD $8.99 在庫あり

PIC32MZ1024ECH124-I/TL

PIC32MZ1024ECH124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024ECH124-I/TL is a high-performance 32-bit MIPS microAptiv-class microcontroller featuring a 200 MHz core delivering 330 DMIPS and 3.28 CoreMark/MHz, packaged in a 124-pin VTLA EP (Thermal Leadless Array) form factor. It integrates 1024 KB of dual-panel Flash memory with live-update support, 512 KB of SRAM, and a rich connectivity peripheral set including 10/100 Ethernet MAC, two CAN 2.0B controllers, six UART modules (25 Mbps, LIN 1.2 and IrDA capable), and six 4-wire SPI modules (50 Mbps). A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance processor core, program and data memory, and a configurable peripheral set on a single die. The PIC32MZ ECH family belongs to Microchip's premium performance tier of 32-bit MCUs, sitting within the broader PIC32 -> MIPS architecture -> microcontroller -> embedded processor hierarchy. This positions the part for applications that demand high-throughput DSP, large RAM-resident data buffers, and full-speed wired connectivity, while remaining programmable through the MPLAB Harmony v3 framework. Key differentiators include Peripheral Pin Select (PPS) for flexible function remapping, eight hardware-programmable DMA channels plus sixteen dedicated DMA channels with automatic data-size detection, hardware crypto/hash engines, and a 12-bit 18 MSPS ADC with up to 48 analog inputs. The integrated FPU, MPU, and trace/debug ports make the device suitable for safety-conscious designs and for code development with MPLAB X IDE. Technically, the part uses a superscalar 32-bit MIPS core with a 5-stage pipeline and dual-issue capability at 200 MHz. The dual-panel Flash architecture permits read-while-write field upgrades, and the 512 KB SRAM allows large TCP/IP, USB, or graphics frame buffers to be held on-chip. The 124-pin VTLA EP package exposes the maximum GPIO count of this family while the exposed pad provides low thermal resistance for industrial-grade operation. Typical applications include industrial Ethernet gateways, building-automation controllers, automotive infotainment head units, multi-protocol industrial sensor hubs, and high-speed HMI/graphical displays. Designers choose this part when deterministic 200 MHz throughput, 1 MB code space, and integrated Ethernet/CAN connectivity are required without an external PHY complexity tax. Design consideration: place decoupling capacitors (100 nF + 1 µF) within 2 mm of every VDD/VSS pair and connect the central exposed pad to a continuous ground plane for thermal dissipation. Confirm that the chosen PHY and CAN transceiver share a common 3.3 V rail to avoid level shifters. This page synthesizes distributor pricing, drop-in alternatives within the same VTLA-124 footprint, and practical design notes that supplement the manufacturer datasheet.

USD $9.30 在庫あり

PIC32MZ1024ECH124T-I/TL

PIC32MZ1024ECH124T-I/TL - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECH124T-I/TL is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, featuring a MIPS32 microAptiv core running at up to 200 MHz. It integrates 1 MB of dual-panel live-update Flash, 512 KB of SRAM, and an extensive connectivity peripheral set including 10/100 Ethernet MAC, dual CAN 2.0b controllers, USB 2.0 OTG (Full/High-Speed), and multiple UART/SPI/I2C interfaces, all packaged in a 124-pin VTLA (9x9 mm) with dual-row exposed pad for thermal dissipation. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program memory (Flash), data memory (RAM), and a configurable set of peripherals onto a single die. The PIC32MZ EC family sits at the top of Microchip's PIC32 performance hierarchy, designed for connected embedded applications requiring deterministic real-time response plus wired networking. Within the broader taxonomy, this part belongs to: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ EC sub-family -> Connectivity-class embedded processor. Key features include class-leading 330 DMIPS and 3.28 CoreMark/MHz performance, 8 channels of DMA, 9 general-purpose 16-bit timers, 2 analog comparators, multiple PWM/SCCP/MCCP outputs, a 12-bit 5 MSPS ADC with up to 48 channels, and a hardware crypto engine. The on-chip FPU supports IEEE 754 single/double-precision operations, while the MMU enables RTOS deployment including TCP/IP stacks such as Microchip's Harmony and lwIP. Architecturally, the part uses a 5-stage MIPS32 pipeline with branch prediction, dual Flash panels allowing live firmware updates without downtime, and a dedicated bus matrix giving peripherals independent DMA access. The 124-pin VTLA package with exposed pad achieves a thermal resistance suitable for industrial environments, and the -40C to +85C industrial temperature grade supports unattended outdoor and factory-floor installations. Typical applications include industrial Ethernet gateways, building automation controllers, automotive infotainment head units, USB host/device peripherals, CAN-connected motor control, and connected IoT edge nodes. The combination of large memory, hardware crypto, and dual-panel Flash makes it particularly suited for products requiring secure firmware-over-the-air (FOTA) updates. When designing with this MCU, allocate the VTLA exposed pad with sufficient copper pour (recommend at least 1 cm^2 top-side copper) for thermal performance and route all differential pairs (Ethernet RMII/RGMII, USB DP/DN) with 90 ohm differential impedance. Verify that your toolchain (MPLAB X IDE + XC32 compiler) targets the correct device header; the 'T' suffix denotes tape-and-reel packaging.

USD $9.45 在庫あり

PIC32MZ1024ECH144T-I/PL

PIC32MZ1024ECH144T-I/PL - 200MHz 1MB Flash MCU w/ ENET&CAN | Microchip

The Microchip Technology PIC32MZ1024ECH144T-I/PL is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running up to 200 MHz, with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin LQFP (20x20 mm, 0.5 mm pitch) package. It is the connectivity variant of the PIC32MZ EC family, integrating a 10/100 Ethernet MAC, USB 2.0 High-Speed PHY, and two CAN 2.0b controllers alongside the high-performance core. A 32-bit MCU (microcontroller) is a single-chip processor integrating a CPU core, program memory, RAM, peripherals, and I/O. The PIC32MZ EC family belongs to the broader MIPS32 microAptiv architecture from Microchip, which targets deterministic real-time control with Harvard bus separation, hardware multiply/divide, DSP extensions, and DSP-enhanced instructions. PIC32 devices sit between 8-bit PIC16/PIC18 MCUs and 32-bit Cortex-M4/M7 ARM devices, offering higher code density than 8-bit parts while remaining simpler than application processors. Key features of this variant include 200 MHz / 252 MIPS core performance, 1 MB Flash with 512 KB RAM, a 12-bit 18 MSPS ADC, four analog comparators, nine timers, nine I/O-capable 16-bit timers/counters, six UART, three SPI, four I2C, two I2S, two CAN, and SQI (Serial Quad Interface) for high-speed external flash. The PIC32MZ1024ECH144T-I/PL is the connectivity edition, with the integrated 10/100 Mbps Ethernet MAC, USB-HS PHY, and two CAN modules. Architecturally, the chip uses a 5-stage pipelined MIPS32 core with hardware multiply/divide, dual-port SRAM, and a dedicated DMA controller with up to eight channels for offloading memory-to-peripheral transfers. The on-chip FPU and DSP extensions accelerate signal-processing workloads in audio, motor control, and graphics. Typical applications include industrial Ethernet gateways, PLC controllers, building-automation nodes, USB instrument peripherals, automotive CAN bridge nodes, IoT edge devices, and HMI panels. Designers select this part when they need Microchip's MPLAB Harmony toolchain, MIPS core compatibility, and integrated connectivity peripherals without external PHY/MAC chips. When designing with this MCU, ensure your supply rail uses a 2.3V-3.6V LDO with bulk decoupling; the 144-LQFP package dissipates up to approximately 0.5 W depending on peripheral activation. Plan for crystal stability and trace impedance on USB and Ethernet differential pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ family, and practical design notes that go beyond the manufacturer datasheet's electrical specs.

USD $9.55 在庫あり

PIC32MZ1024ECM064-I/MR

PIC32MZ1024ECM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM064-I/MR is a 32-bit MIPS32 microAptiv-based microcontroller operating up to 200 MHz, integrating 1 MB Flash and 512 KB SRAM in a 64-pin VQFN (9x9 mm) package. As a member of the PIC32MZ Embedded Connectivity (EC) family, it delivers 330 DMIPS and 3.28 CoreMark/MHz, supported by microMIPS mode for up to 35% smaller code size. The device operates from 2.2 V to 3.6 V and integrates high-speed USB, Ethernet MAC, crypto accelerator, dual-panel live-update Flash, and a 12-bit 1.2 MSPS analog-to-digital converter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals around a common bus. The PIC32MZ EC family sits in the high-performance tier of Microchip's 32-bit portfolio, positioned between mainstream Cortex-M4/M7 parts and dedicated application processors. Within the broader hierarchy, the PIC32MZ EC is a microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded connectivity MCU -> semiconductor IC. Key differentiating features include the hardware crypto engine for AES, 3DES, SHA, and MD5 acceleration, a Hi-Speed USB 2.0 OTG controller with integrated PHY, a 10/100 Mbps Ethernet MAC with RMII/MII interface, and six UART, four I2C, and four SPI peripherals for multi-bus connectivity. The dual-panel Flash architecture enables live firmware updates without CPU stall, critical for industrial and IoT applications that must remain online during OTA rollouts. The microAptiv core includes a DSP-enhanced pipeline with four 64-bit accumulators, single-cycle MAC, and saturating/fractional math, enabling real-time audio, motor control, and signal-processing workloads. The integrated FPU is absent on this part, but floating-point emulation runs efficiently in microMIPS mode. The 28-channel, 12-bit 1.2 MSPS ADC paired with six analog comparators supports precision sensor acquisition in motor control and instrumentation front-ends. Typical applications include industrial Ethernet gateways, USB-enabled HMI panels, secure IoT edge nodes with TLS offload, motor control BLDC/PMSM drives, and audio processing front-ends that benefit from the live-update Flash. The 64-VQFN package with 9x9 mm footprint also suits space-constrained designs where TQFP would be impractical. Cryptographic acceleration and TRNG make the EC family a fit for any connected device requiring hardware-rooted identity and TLS 1.2/1.3 handshake acceleration. When designing with this MCU, allocate decoupling capacitance of at least 0.1 microfarad per Vdd/Vss pair placed within 5 mm of the supply pins, and provide a 12 MHz primary crystal or resonator to drive the PLL that synthesizes the 200 MHz system clock. Do not exceed 3.6 V on any I/O pin; 5 V tolerant pins must be configured and treated as high-voltage inputs only. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC32MZ EC family, and practical design notes not found in the manufacturer datasheet alone.

USD $6.40 在庫あり

PIC32MZ1024ECM064-I/PT

PIC32MZ1024ECM064-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM064-I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, built on the MIPS32 microAptiv core and operating at up to 200 MHz. The device integrates 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin TQFP (10x10 mm) package, targeting Ethernet-connected, crypto-accelerated, and CAN-enabled industrial designs. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher throughput than 8/16-bit MCUs while retaining deterministic real-time behavior. Within the broader semiconductor hierarchy, an MCU sits below microprocessors in compute capability but above simple logic ICs in integration; PIC32 devices occupy the high-performance tier of Microchip's MCU portfolio, bridging the gap between traditional 8/16-bit PIC microcontrollers and application processors. The EC sub-family specifically adds hardware cryptography, Ethernet, and high-speed USB to the standard peripheral set. Key features of the PIC32MZ1024ECM064 include a 200 MHz core with 1.5 DMIPS/MHz performance, 1 MB Flash, 512 KB SRAM, dedicated crypto engine (AES, 3DES, SHA, MD5), integrated 10/100 Ethernet MAC, dual CAN 2.0b controllers, USB 2.0 high-speed OTG, and a 12-bit 18-channel ADC at 500 ksps. The device supports 5V-tolerant I/O with 32 mA source/sink capability, configurable open-drain, pull-ups, pull-downs, and external interrupts on every I/O pin, plus a Class B Safety Library for IEC 60730 compliance. The PIC32MZ1024ECM064 uses a 5-stage pipelined MIPS32 microAptiv core with single-cycle hardware multiply/divide and a tightly-coupled prefetch module that minimizes Flash wait states. Its 80 MHz peripheral bus is independent of the core clock, allowing deterministic DMA and communication timing. The integrated crypto accelerator offloads AES/SHA operations from the core, and the dedicated Ethernet MAC with RMII/MII interfaces simplifies connected-Node designs. Typical applications include industrial IoT gateways, Ethernet-connected motor controllers, building automation controllers, secure POS terminals, and CAN-enabled automotive body modules. The combination of 1 MB Flash and crypto acceleration also makes the part suitable for over-the-air (OTA) updatable firmware with signed-image verification. When designing with this device, allocate sufficient decoupling (100 nF + 10 uF per VDD pin pair) and follow Microchip's TQFP-64 land pattern recommendations to maintain signal integrity on the 200 MHz core. For new designs Microchip recommends migrating to the PIC32MZ EF family which adds a Floating Point Unit and improved peripherals; the EC family remains supported but is marked NRND (Not Recommended for New Designs). This page synthesizes verified distributor pricing, 5 drop-in package-compatible alternatives, and practical PCB/application guidance that go beyond the manufacturer datasheet to accelerate your selection and qualification workflow.

USD $7.48 在庫あり

PIC32MZ1024ECM064T-I/PT

PIC32MZ1024ECM064T-I/PT - 32-bit 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECM064T-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC32 microcontroller running at 200 MHz with 1 MB of Flash and 524 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It delivers up to 46 user I/O lines, supports 3.3V operation, and integrates an FPU for high-throughput DSP-class workloads. The -I grade silicon is rated for the industrial -40C to +85C temperature range, making it suitable for harsh-environment embedded systems. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a 32-bit processor core, Flash program memory, SRAM, and a rich peripheral set on a single die. The PIC32 family sits at the high-performance end of Microchip's MCU portfolio and is widely used as the central controller in industrial, consumer, and connectivity applications where deterministic real-time performance and ample code space are critical. Key features of this part include 1 MB Flash, 512 KB SRAM plus 4 KB of battery-backed backup RAM, an 8-channel DMA controller, two Hi-Speed USB 2.0 PHYs (host + device), 10/100 Ethernet MAC, dual CAN 2.0b controllers, six UART, five SPI, four I2C, an 8-channel 12-bit 1.2 Msps ADC, and a hardware crypto engine. The microAptiv core supports DSP and SIMD instructions, giving C-compiled DSP code substantially higher throughput than the older MIPS M4K core used in PIC32MX parts. Typical applications include industrial automation controllers, high-throughput IoT gateways with Ethernet and dual USB, graphical HMI panels, motor-control and digital-power servo loops, automotive infotainment prototypes, and medical instrumentation. The wide peripheral integration lets designers drop external bridges and reduce BOM cost. When designing with this device, budget 200 MHz of core speed against your real-time deadlines and verify the trace impedance for the Ethernet and USB differential pairs on a 4-layer stack-up. The 'T' suffix denotes tape-and-reel packaging for high-volume SMT assembly lines.

USD $8.95 在庫あり

PIC32MZ1024ECM100-I/PF

PIC32MZ1024ECM100-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECM100-I/PF is a 32-bit RISC Flash microcontroller from the PIC32MZ Embedded Connectivity (EC) family, featuring the MIPS32 microAptiv core running at 200 MHz with 330 DMIPS throughput. It integrates 1024 KB (1 MB) of Flash program memory and 512 KB of data RAM in a 100-pin TQFP (14x14 mm) package, with a -40C to +85C industrial operating range. A 32-bit microcontroller (MCU) is an integrated computing subsystem built around a 32-bit CPU core, on-chip Flash for code storage, SRAM for runtime data, and a rich set of peripherals such as ADC, timers, and communication interfaces. Within the taxonomy of semiconductors, this places the part under MCU -> microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EC family is optimized for high-performance connected applications that demand Ethernet, USB, and CAN connectivity alongside a deterministic DSP-enhanced engine. Key differentiating features of the PIC32MZ1024ECM100-I/PF include the DSP-enhanced microAptiv core with four 64-bit accumulators, single-cycle MAC, saturating and fractional math, microMIPS mode for up to 35% code compression, a 10-bit 500 KSPS 40-channel ADC module, dual-panel Flash for live update support, an integrated Memory Management Unit for embedded OS execution, plus hardware crypto accelerators. Communication peripherals cover CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S audio interfaces. Architecturally, the device pairs a Harvard bus microAptiv core with tightly-coupled SRAM and a 128-bit-wide Flash bus to sustain instruction throughput at 200 MHz. The included crypto engine (CA), Ethernet MAC, and USB HS/FS PHYs provide wired connectivity without external companion chips, while dual-panel Flash enables firmware field updates without downtime - critical for industrial IoT and gateway designs. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS acceleration, automotive body controllers, HMI panels with audio playback, and medical instrumentation requiring deterministic real-time DSP. The wide peripheral mix also suits motor control and graphics user-interface tasks when paired with an external TFT controller. When designing with this part, allocate a 4-layer PCB and dedicate solid ground planes under the analog AVSS pins to achieve the datasheet ADC SNR; verify that 1.8V core decoupling uses a 1uF X7R within 2 mm of the VCAP pin to avoid Vcore droop under heavy DMA load. Note: per Microchip, this family is not recommended for new designs - the PIC32MZ EF family with FPU is the preferred migration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a faster engineering decision workflow than distributor catalog pages.

USD $6.65 在庫あり

PIC32MZ1024ECM100-I/PT

PIC32MZ1024ECM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM100-I/PT is a high-performance 32-bit MIPS microAptiv-based microcontroller IC running up to 200 MHz (330 DMIPS), featuring 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP (12x12 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. The PIC32MZ family sits at the top of Microchip's PIC32 line, targeting embedded connectivity applications that require deterministic real-time performance, large code storage, and high-throughput interfaces such as Ethernet, CAN, USB, and SQI. Within the broader taxonomy, the PIC32MZ1024ECM100 belongs to the EC (Embedded Connectivity) sub-family — positioned between the lower-pin-count PIC32MX series and the higher-performance PIC32MZ EF family that adds a hardware Floating Point Unit. Key features include a 200 MHz / 330 DMIPS MIPS32 microAptiv core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), microMIPS mode for up to 35% code compression, dual-panel Flash for live update support, a 10-bit 500 KSPS 40-channel ADC module, a Memory Management Unit (MMU) for OS execution, and integrated peripherals including CAN, UART, I2C, PMP, EBI, SQI, and analog comparators. SPI/I2S interfaces are also provided for audio connectivity. Architecturally, the device combines a 5-stage pipeline microAptiv core with tightly-coupled SRAM and a multi-channel DMA engine, enabling efficient data movement for peripherals such as Ethernet and SQI without CPU intervention. The dual-panel Flash allows the application to perform live firmware updates by writing to one panel while executing from the other — a critical feature for connected IoT and industrial nodes that cannot tolerate downtime. Typical applications include industrial Ethernet nodes, CAN-connected motor control, secure connected gateways, USB audio devices, and human-machine interface (HMI) controllers. The wide peripheral mix also suits smart-energy metering and building automation. When designing in this part, allocate the 100-pin TQFP footprint with sufficient decoupling (100 nF per supply pair plus a bulk capacitor) and reserve the ICSP pair PGECx/PGEDx for in-circuit programming. For new designs that require an FPU or higher clock rates, consider migrating to the PIC32MZ EF family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7.45 在庫あり

PIC32MZ1024ECM100T-I/PF

PIC32MZ1024ECM100T-I/PF - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM100T-I/PF is a high-performance 32-bit microcontroller from the PIC32MZ family, featuring the MIPS32 microAptiv core running at 200 MHz with 330 DMIPS performance. It integrates 1 MB (1024 KB) of flash program memory and 524 KB of SRAM in a 100-pin TQFP package (14x14 mm), supporting industrial-grade operation (-40C to +85C). The 'T' suffix denotes tape-and-reel packaging and the 'I' suffix indicates the industrial temperature range. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, memory, and configurable peripherals. The PIC32MZ family is Microchip's flagship 32-bit line based on the MIPS microAptiv architecture, sitting within the broader hierarchy of microcontroller -> embedded controller -> semiconductor. These devices bridge the gap between 8/16-bit MCUs and application processors, providing deterministic real-time control with ample throughput for connected and graphics-rich applications. Key features of this device include hardware crypto engine, dual-panel flash for live update, 10-bit 500 KSPS 40-channel ADC, memory management unit (MMU) for RTOS support, microMIPS mode for up to 35% code compression, and a comprehensive peripheral set including Ethernet, CAN, UART, I2C, SPI/I2S, PMP, EBI, and SQI interfaces. The integrated FPU and DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math) accelerate signal-processing workloads. The microAptiv core with its 5-stage pipeline, branch predictor, and tightly-coupled SRAM delivers deterministic interrupt latency while sustaining high throughput. The hardware crypto engine and true random number generator support secure boot, TLS, and IPsec acceleration, making the part attractive for connected industrial gateways and IoT edge nodes. With 1 MB flash and 524 KB RAM, the device can host a full embedded OS plus application firmware. Typical applications include industrial automation controllers, Ethernet-connected IoT gateways, automotive infotainment/HMI prototypes, secure point-of-sale terminals, motor control and digital power conversion, medical instrumentation requiring CAN connectivity, and graphical HMI panels with TFT displays. The wide peripheral set also suits robotics, building automation, and remote sensor nodes. When designing with this MCU, allocate the lower 512 KB of flash for the bootloader (leveraging dual-panel live update) and reserve the upper 512 KB for the application image. Decouple all VDD/VSS pairs with 100 nF ceramics as close to the pins as possible, and route the 50 MHz Ethernet reference clock with controlled impedance. Refer to the Microchip PIC32MZ EC Family datasheet and the Harmony 3 framework for software support. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes for engineers evaluating the PIC32MZ1024ECM100T-I/PF, complementing the manufacturer datasheet with cross-package context and lifecycle information not always surfaced on distributor listings.

USD $11.28 在庫あり

PIC32MZ1024ECM100T-I/PT

PIC32MZ1024ECM100T-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MZ1024ECM100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, running at up to 200 MHz with 330 DMIPS throughput, integrating 1 MB of Flash and 256 KB of SRAM into a 100-pin TQFP (12x12 mm, 0.4 mm pitch) package. According to the Microchip product page, the device features four 64-bit accumulators, single-cycle MAC with saturating and fractional math, microMIPS mode for up to 35% code compression, dual-panel Flash for live update support, and a Memory Management Unit (MMU) for embedded OS execution. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, volatile and non-volatile memory, and programmable peripherals on a single silicon die. The PIC32MZ family belongs to the broader category of embedded microcontrollers within the semiconductor hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor IC. microAptiv cores combine compact code density with DSP extensions, placing the PIC32MZ EC family above simple Cortex-M0/M0+ parts but below Cortex-M7 in raw signal-processing capability. Key features of the PIC32MZ1024ECM100T-I/PT include a 10-bit 500 KSPS 40-channel ADC, CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S interfaces. The on-chip crypto engine and integrated Ethernet MAC make the EC variant differentiated for connected industrial designs, while dual-panel Flash enables firmware Live Update without downtime. The microAptiv pipeline supports both MIPS32 and compressed microMIPS instruction modes, allowing a C compiler to trade code size for throughput. An MMU provides full virtual-memory support for embedded Linux or RTOS environments, while the 16 KB instruction cache and 4 KB data cache accelerate tight DSP loops such as audio and motor-control algorithms. Typical applications include industrial Ethernet gateways, building automation controllers, CAN-connected automotive body and chassis ECUs, audio processing with I2S codecs, and graphical HMI front panels driving LCD or TFT displays via the parallel master port (PMP). Design with this device by budgeting 100-pin GPIO carefully - the EC variant consumes roughly 30 pins for Ethernet, USB, and high-speed serial interfaces, leaving 70+ for user I/O. Use decoupling per Microchip AN583 - one 100 nF X7R per VDD pin, plus a single 4.7 uF bulk near the regulator. This page synthesizes distributor pricing, drop-in PIC32MZ EC family alternates, and practical design notes that complement the manufacturer datasheet with practical cross-referencing and BOM-decision guidance.

USD $9.55 在庫あり

PIC32MZ1024ECM124-I/TL

PIC32MZ1024ECM124-I/TL - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM124-I/TL is a 32-bit MIPS32 microAptiv PIC microcontroller delivering 200 MHz core performance with 1 MB of Flash program memory and 512 KB of SRAM, packaged in a 124-pin VTLA (9x9 mm) surface-mount module. The part integrates HS USB, 10/100 Ethernet MAC, dual-panel live-update Flash, and an advanced analog block including a 12-bit ADC at up to 2 MSPS, making it one of the highest-performance general-purpose members of the PIC32MZ Embedded Connectivity (EC) family. A 32-bit microcontroller is an integrated circuit that combines a CPU core, program memory, data memory, and a rich set of peripherals (timers, communication interfaces, ADCs, DACs, and I/O) on a single die. The PIC32MZ family belongs to the broader category of MIPS-based microcontrollers, which sit hierarchically inside RISC microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MZ EC devices specifically target connectivity-rich IoT, audio, graphics, and industrial HMI applications. The PIC32MZ1024ECM124 features 330 DMIPS / 3.28 CoreMark/MHz performance, dual-panel Flash allowing live firmware updates without downtime, hardware crypto accelerators and a true random number generator for security, an integrated 50 MHz reference clock for USB and Ethernet, and a comprehensive pin/feature remapping peripheral pin select (PPS) subsystem. The 124-pin VTLA package exposes up to 98 I/O pins, multiple UART/SPI/I2C instances, and parallel display/graphics interfaces. Architecturally, the part combines a 5-stage MIPS32 microAptiv core with tightly coupled instruction and data prefetch buffers, an 8-channel DMA controller, a dedicated crypto engine, and dual Flash banks for background programming. Power management includes multiple low-power modes, an on-chip LDO, and selectable peripheral clock gating. The 'EC' designation indicates the Embedded Connectivity variant with the strongest communications peripheral set in the PIC32MZ line. Typical applications include industrial IoT gateways with Ethernet and Wi-Fi co-processor interfaces, USB host/device embedded products, multi-protocol industrial controllers (Modbus, EtherCAT slave bridges), secure connected appliances, graphical HMI touch panels, and audio playback systems using the on-chip I2S/音频 codec interfaces. The 1 MB dual-panel Flash supports OTA firmware upgrades. When designing with this part, allocate sufficient decoupling (100 nF + 4.7 µF per VDD/VDDIOX pin pair), keep trace lengths matched for USB differential pairs, and use MPLAB Harmony v3 for code generation. Note that the master clock requires an external crystal or oscillator; the integrated 50 MHz reference cannot replace the primary system oscillator. The 9x9 mm VTLA has an exposed thermal pad that must be soldered to a continuous ground pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ family, recommended companion parts for typical applications, and practical design notes that go beyond the manufacturer datasheet excerpt.

USD $7.85 在庫あり

PIC32MZ1024ECM124T-I/TL

PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM124T-I/TL is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ EC (Embedded Connectivity) family, operating at up to 200 MHz and delivering 330 DMIPS and 3.28 CoreMark/MHz. It integrates 1 MB (1024 KB) of dual-panel live-update Flash and 512 KB of SRAM in a 124-pin VTLA (9x9 mm, 0.9 mm height) surface-mount package. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs. Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade). The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse. Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required. When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.

USD $8.40 在庫あり

PIC32MZ1024ECM144-I/PH

PIC32MZ1024ECM144-I/PH - 200MHz MCU 1MB Flash 144-TQFP | Microchip

The Microchip Technology PIC32MZ1024ECM144-I/PH is a high-performance 32-bit MIPS32 microAptiv core microcontroller running at 200 MHz (330 DMIPS, 3.28 CoreMark/MHz) with 1 MB Flash and 512 KB SRAM in a 144-pin TQFP (PH) 16x16 mm package. It integrates dual-panel live-update Flash, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, microMIPS mode for up to 35% code compression, and a memory Management Unit (MMU) for embedded OS execution. A 32-bit microcontroller (MCU) is an integrated circuit containing a high-performance processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, timers, communication interfaces, and GPIO. The PIC32 family belongs to the MIPS32 architecture lineage and sits within Microchip's portfolio of MCU -> embedded controller -> microcontroller -> semiconductor device taxonomy, targeting demanding real-time and DSP-oriented embedded applications. Key features of this device include a 10-bit 500 KSPS 48-channel ADC module, 200 MHz CPU clock, 1 MB dual-bank Flash for live firmware update, 512 KB SRAM, and connectivity peripherals including CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S audio interfaces. The crypto accelerator and Ethernet MAC make it suitable for connected secure nodes. The microAptiv core architecture combines a 5-stage pipeline with DSP extensions, hardware multiply-accumulate, and dedicated DSP registers, enabling efficient audio decoding, motor-control loops, and signal-processing tasks. The integrated MMU supports full operating systems such as Linux or RTOS kernels like FreeRTOS and Micrium OS, while the dual-panel Flash architecture enables fail-safe firmware updates without system downtime. Typical applications include industrial automation controllers, IoT edge gateways, automotive body/comfort modules, graphics HMI terminals, motor control inverters, audio processing products, and Ethernet-connected secure devices requiring hardware cryptography. The 144-pin package provides ample GPIO for multi-bus applications. Designers should provide a low-noise 3.3V LDO for the AVDD rail, route analog and digital grounds separately, and follow Microchip's PCB layout recommendations for oscillator placement. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8.95 在庫あり

PIC32MZ1024ECM144T-I/PL

PIC32MZ1024ECM144T-I/PL - 200MHz 32-bit MCU 1MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024ECM144T-I/PL is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, built on the MIPS32 microAptiv core with DSP enhancements and dual-panel Flash for live-update support. It runs at 200 MHz delivering 330 DMIPS, integrates 1 MB of Flash and 512 KB of SRAM, and is housed in a 144-pin LQFP package (20x20 mm) with industrial-grade -40C to +85C operating range. The "T" suffix indicates Tape & Reel packaging; the "I" indicates industrial temperature grade. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, plus a rich set of programmable peripherals. The PIC32MZ EC family belongs to the broader hierarchy: 32-bit MCU -> embedded microcontroller -> microcontroller -> semiconductor IC. The microAptiv core adds single-cycle MAC with four 64-bit accumulators, saturating and fractional math, microMIPS mode for up to 35% code compression, and a Memory Management Unit for embedded OS execution. The Floating Point Unit (FPU) and crypto engine are NOT included in the EC variant - they appear in the EF family. Key features include 1 MB Flash, 512 KB SRAM, a 10-bit 500 KSPS 48-channel ADC, dual-panel Flash for live firmware update, CAN, six UARTs, I2C, SPI/I2S, PMP, EBI, SQI interfaces, Ethernet MAC, and analog comparators. The integrated crypto accelerator and hardware RNG provide secure boot and encrypted communication suitable for IoT gateways. The 144-LQFP offers generous I/O with multiple remappable peripherals to ease PCB routing. Wide 3.0V to 3.6V core voltage is supplied through a single 3.3V rail typical of modern embedded designs. Typical applications include industrial IoT gateways, EtherCAT or CAN-FD node controllers, Ethernet-connected HMI panels, motor control with FOC algorithms, and secure POS terminals. Industrial-grade silicon supports factory-floor deployments, and the dual-panel Flash enables field firmware updates without service interruption. The 200 MHz core plus DSP extensions accelerate control-loop math (PID, FOC) and audio codec processing in embedded designs. When designing with this device, allocate a 4-layer PCB with solid ground planes for the analog section, place a 12 MHz crystal within 5 mm of the OSCI/OSCO pins, and provision decoupling of one 100 nF + one 4.7 uF per VDD pin. Note that the EC family is NOT recommended for new designs - Microchip directs customers to the EF (FPU + crypto) family for new projects.

USD $8.71 在庫あり

PIC32MZ1024EFE064-I/MR

PIC32MZ1024EFE064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE064-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class Warrior core running up to 200 MHz (252 MHz on related family members) with 1 MB of Flash and 256 KB of SRAM, housed in a 64-pin QFN (MR) 9x9 mm package. This 'EFE' variant excludes the crypto accelerator and CAN module, while still retaining high-speed USB, Ethernet, advanced analog, audio and graphics peripherals. A PIC32MZ EF microcontroller is a 32-bit MIPS-based MCU designed for embedded connectivity applications requiring high computational throughput, large memory and rich peripheral integration. Within Microchip's broader hierarchy it sits as an MCU -> 32-bit MCU -> PIC32 family -> PIC32MZ EF sub-family -> connectivity-class device, targeting industrial, automotive, IoT, HMI/graphics and motor-control segments. Key features of this part include 200 MHz / 330 DMIPS core performance, IEEE 754 hardware floating-point unit, DSP extensions with four 64-bit accumulators and single-cycle MAC, dual-panel Flash supporting live update, a 12-bit 5 Msps analog-to-digital converter with up to 48 channels, two 12-bit DACs, four analog comparators, Hi-Speed USB 2.0 device/host/OTG, 10/100 Ethernet MAC, and multiple UART/SPI/I2C/CAN-FD (in G-variants) interfaces. The 64-QFN package exposes 53 I/O pins and a low-pin-count variant footprint for compact designs. Architecturally the device pairs the Warrior M-class core with multi-channel DMA, a high-bandwidth SRAM matrix, a dedicated crypto/hash engine (disabled on this 'EFE' variant), and a flexible peripheral pin-select system. The integrated FPU removes the need for software floating-point emulation in compute-intensive loops, while the dual-panel Flash arrangement lets firmware load an alternate image during runtime upgrades, critical for unattended industrial and IoT deployments. Typical applications include industrial HMI touch panels, IoT edge nodes with Ethernet/USB connectivity, audio processing equipment using I2S and DSP, motor-control FOC drives, industrial IoT bridges, and graphics-capable medical or test instruments. The 1 MB Flash and 256 KB SRAM allow full TCP/IP stacks plus application code on-chip. When designing with this device, verify that your supply budget tolerates the 200 MHz active current and use a 4-layer PCB with a solid ground plane for EMI performance. The MR (QFN) package requires careful thermal relief because all power is dissipated through the exposed pad and bond wires. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.30 在庫あり

PIC32MZ1024EFE064-I/PT

PIC32MZ1024EFE064-I/PT - 32-bit MCU 252MHz 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE064-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, running up to 252 MHz with 330 DMIPS, equipped with 1 MB Flash and 256 KB SRAM, and housed in a 64-pin TQFP (10x10 mm) package. It integrates an FPU, DSP enhancements with four 64-bit accumulators, IEEE 754-compliant single- and double-precision math, and single-cycle MAC, saturating and fractional arithmetic. An MCU (Microcontroller Unit) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family is positioned in the hierarchy as: MIPS MCU -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF variants specifically target connectivity, graphics (HMI), and motor control, bridging the gap between traditional PIC MCUs and high-end application processors. Key features include dual-panel Flash for live-update firmware support (allowing in-field firmware swap without downtime), Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, up to four SPI/I2S interfaces, two I2C buses, six UART channels, 12-bit ADC at 500 ksps, and a parallel master port for graphics displays. The IC operates from 2.3V to 3.6V and supports an industrial temperature range of -40C to +85C. The device uses a 5-stage pipeline MIPS Warrior M-class core with DSP extensions, enabling deterministic real-time response while running protocols like TCP/IP, USB, and graphics stacks simultaneously. The 200 MHz core delivers 3.28 CoreMark/MHz performance, making it competitive with Cortex-M4 class devices while offering integrated Ethernet and HS-USB that often require external PHYs on competing parts. Typical applications include industrial IoT gateways with Ethernet, HMI panels with TFT displays, USB audio interfaces, motor control drives with field-oriented control, and connected medical instrumentation. The 1 MB dual-bank Flash supports OTA firmware updates by running from one panel while writing the other. When designing with this part, allocate a 4-layer stack with continuous ground plane beneath the TQFP footprint to control EMI from the 252 MHz core. Decouple VDD/VUSB/VCAP/AVDD with 100 nF X7R at every supply pin within 2 mm trace length. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6.20 在庫あり

PIC32MZ1024EFE064T-I/MR

PIC32MZ1024EFE064T-I/MR - 200MHz 32-bit MCU, 1MB Flash, 64-QFN

The Microchip Technology PIC32MZ1024EFE064T-I/MR is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package. It features the MIPS microAptiv core with FPU and is part of the PIC32MZ EF family targeting connectivity, industrial, automotive, IoT, graphics (HMI), and motor control applications. Key differentiating features include HS USB, Ethernet MAC, SQI (Serial Quad Interface), a 12-bit ADC module with up to 24 channels, and a Crypto engine exclusion variant ("No Crypto"). A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals. Within the broader taxonomy, 32-bit MCUs sit between 8/16-bit microcontrollers and microprocessor units (MPUs); they offer near-MPU computational performance while retaining real-time deterministic interrupt response. The PIC32MZ EF family specifically adds DSP extensions, an FPU, and a wide peripheral set, positioning it between traditional Cortex-M4 class MCUs and application processors. The PIC32MZ1024EFE064T-I/MR integrates HS USB 2.0 OTG, 10/100 Ethernet MAC with MII/RMII, CAN 2.0B, multiple UART/SPI/I2C, a 12-bit 5 MSPS ADC with up to 24 channels, and dedicated DMA channels for offloading CPU data movement. The device supports Live-Update Flash (allowing firmware updates without downtime), hardware crypto acceleration variants (this "No Crypto" MPN omits it), and a rich graphics interface for HMI panels. Architecturally, the device pairs the MIPS microAptiv core with 16 KB I-cache and 4 KB D-cache, a memory protection unit, and a high-speed system bus fabric that feeds peripherals from separate DMA channels. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMark/MHz, and the dual-panel Flash architecture enables robust field updates. Typical applications include industrial Ethernet gateways, automotive HMI clusters, IoT edge nodes with USB or Ethernet, motor control drives, and high-resolution graphics HMI panels. Design considerations for this part include careful power-decoupling network design around the 64-QFN exposed pad for the high-speed ADC, and adequate bulk capacitance for the HS USB and Ethernet PHYs operating simultaneously. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet.

USD $9.85 在庫あり

サブカテゴリ

製品 (32725)

PIC32MZ1024ECH064-I/PT - 200MHz 32-bit MCU, 1MB Flash, Ethernet | Microchip

PIC32MZ1024ECH064T-I/MR - 200MHz 1MB Flash MCU 64-QFN | Microchip

PIC32MZ1024ECH064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECH100-I/PF - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1024ECH100-I/PT - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024ECH100T-I/PF - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024ECH100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1024ECH124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip

PIC32MZ1024ECH124T-I/TL - 200MHz 32-Bit MCU 1MB Flash | Microchip

PIC32MZ1024ECH144T-I/PL - 200MHz 1MB Flash MCU w/ ENET&CAN | Microchip

PIC32MZ1024ECM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECM064-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECM064T-I/PT - 32-bit 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024ECM100-I/PF - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024ECM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECM100T-I/PF - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECM100T-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100 | Microchip

PIC32MZ1024ECM124-I/TL - 32-bit 200MHz MCU 1MB Flash | Microchip

PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024ECM144-I/PH - 200MHz MCU 1MB Flash 144-TQFP | Microchip

PIC32MZ1024ECM144T-I/PL - 200MHz 32-bit MCU 1MB Flash 144-LQFP | Microchip

PIC32MZ1024EFE064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFE064-I/PT - 32-bit MCU 252MHz 1MB Flash | Microchip

PIC32MZ1024EFE064T-I/MR - 200MHz 32-bit MCU, 1MB Flash, 64-QFN