集積回路

サブカテゴリ

📁 ADC/DAC 2520 製品 📁 アンプIC 800 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 314 製品 📁 DSP 963 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1603 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18756 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32865)

ADS8482IBRGZR - 18-Bit 1MSPS SAR ADC w/ Internal Ref | Texas Instruments
ADS8482IBRGZR

ADS8482IBRGZR - 18-Bit 1MSPS SAR ADC w/ Internal Ref | Texas Instruments

The Texas Instruments ADS8482IBRGZR is an 18-bit, 1-MSPS successive-approximation-register (SAR) analog-to-digital converter with an internal 4.096 V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. The converter includes an inherent sample-and-hold front end and offers three interface modes: a full 18-bit parallel bus, a 16-bit option using two read cycles, and an 8-bit bus option using three read cycles, allowing seamless pairing with 8-bit, 16-bit, or 32-bit microcontrollers and DSPs. An SAR ADC is a type of data converter that uses a binary-search algorithm against an internal precision DAC to resolve the input voltage in a fixed number of clock cycles, producing a single-shot conversion with no pipeline latency. SAR ADCs sit within the broader data-converter hierarchy of analog-to-digital converters (ADC) -> data converters -> signal chain -> mixed-signal IC. Compared to delta-sigma or pipeline ADCs, SAR parts like the ADS8482 trade raw speed or oversampling for guaranteed single-cycle latency and deterministic DC behavior, which is why they dominate multiplexing, control-loop, and precision instrumentation front ends. Key specifications include 1 MSPS throughput, 18-bit resolution with no missing codes, an integrated low-drift 4.096 V reference, and a fully differential input that accepts pseudo-bipolar signals. The device supports 3 V or 5 V digital I/O and operates from -40C to +85C industrial temperature range. Its micropower dissipation makes it suitable for multi-channel data-acquisition boards where heat and battery life matter, and the parallel interface simplifies connection to FPGAs, ASICs, and high-speed microcontrollers without requiring a serial-port configuration. The internal architecture uses a charge-redistribution capacitor DAC array combined with a precision bandgap reference and an input sample-and-hold, achieving high DC accuracy and low aperture uncertainty. The pseudo-bipolar differential input allows the converter to digitize signals swinging around a common-mode voltage, eliminating the need for an external instrumentation amplifier in many cases. The configurable bus width (18/16/8 bits) is implemented through hardware mode pins, giving the system designer flexibility for legacy host processors without a full 18-bit port. Typical applications include medical instrumentation such as patient monitoring and diagnostic imaging front ends, industrial process control and multi-channel data-acquisition systems, optical networking power monitoring, precision weigh scales, and seismic or vibration analysis equipment. The combination of 18-bit resolution, 1 MSPS speed, and integrated reference lowers the BOM for high-accuracy systems. When designing with the ADS8482IBRGZR, provide a low-impedance input buffer and place the bypass capacitors as close to the supply pins as possible to maintain linearity at 1 MSPS. The internal reference eliminates the need for an external reference IC, but its decoupling must follow the datasheet layout recommendations for full SNR performance. This page consolidates manufacturer specifications, distributor pricing, and pin-compatible alternatives into a single engineering reference not available on the TI datasheet alone.

見積もり お問い合わせ
ADS8482IRGZR - 18-bit 1MSPS SAR ADC w/Internal Ref | TI
ADS8482IRGZR

ADS8482IRGZR - 18-bit 1MSPS SAR ADC w/Internal Ref | TI

The Texas Instruments ADS8482IRGZR is an 18-bit, 1-MSPS successive-approximation-register (SAR) analog-to-digital converter with an internal 4.096 V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. The device integrates an 18-bit capacitor-based SAR core with inherent sample-and-hold, supports a parallel interface with selectable 18-bit, 16-bit (two read cycles), or 8-bit bus (three read cycles) data widths, and operates over the industrial -40C to +85C temperature range. An SAR (Successive Approximation Register) ADC is a precision data-converter architecture that uses an internal binary-search algorithm against a precision DAC to resolve a single input sample per conversion cycle. SAR ADCs occupy the middle ground between slow, ultra-precise delta-sigma ADCs and fast but lower-resolution flash ADCs, and are widely used in industrial process control, instrumentation, and medical imaging where single-shot accuracy at moderate sample rates is required. The ADS8482 family sits in the power-management-and-conversion IC hierarchy: ADC -> data converter -> signal-chain IC -> mixed-signal semiconductor. Key differentiating specifications include 1 MSPS guaranteed throughput, an internal low-drift 4.096 V reference that eliminates an external reference IC, true 18-bit no-missing-codes performance, 1 LSB (max) INL and DNL, pseudo-bipolar fully differential inputs accepting ±VREF, and a 48-pin VQFN PowerPAD that keeps theta_JA low enough for industrial operation without a heatsink. The wide digital-interface flexibility (18/16/8-bit) lets designers connect it directly to 8-bit microcontrollers, 16-bit DSPs, or 18-bit ASICs without external glue logic. Architecturally, the ADS8482 combines a charge-redistribution SAR DAC, an on-chip precision bandgap reference, a differential input front end, and a digital interface engine that supports byte, word, and full-word readback. The pseudo-bipolar input accepts signals from -VREF to +VREF around mid-scale (2.048 V), which simplifies signal conditioning for many sensor-bridge and bipolar transducer outputs. Typical applications include medical imaging front ends, industrial process-control data acquisition cards, precision weigh scales, optical sensor interfaces, and vibration analysis. The 1 MSPS throughput and 18-bit resolution make it a strong fit for multiplexed multi-channel systems where one ADC serves many slow sensors. A primary design consideration is bypassing: the reference pin and AVDD rails each require a low-ESR ceramic plus bulk capacitor placed within a few millimeters of the package to achieve the datasheet SNR and DNL. Pseudo-bipolar inputs must be DC-biased to mid-scale via high-impedance resistor networks to avoid clipping on negative excursions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ADS8484IBRGZR - 18-Bit 1.25MSPS SAR ADC | Texas Instruments
ADS8484IBRGZR

ADS8484IBRGZR - 18-Bit 1.25MSPS SAR ADC | Texas Instruments

The Texas Instruments ADS8484IBRGZR is an 18-bit, 1.25-MSPS successive-approximation analog-to-digital converter with an internal 4.096-V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. It features ±1-LSB INL max, ±0.5-LSB DNL, and single +5V analog supply operation, drawing only 100 mW of power at full sample rate. An SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a type of high-precision data converter that uses a binary search algorithm against an internal DAC to resolve each input sample to N bits in N clock cycles. SAR ADCs occupy the middle ground between flash converters (fast, low resolution) and sigma-delta converters (very high resolution, slow). They combine low latency, deterministic latency, and high accuracy - making them the dominant architecture for industrial data acquisition, instrumentation, and control loops where every microsecond counts. Key features of the ADS8484IBRGZR include a capacitor-based charge-redistribution SAR core with inherent track-and-hold, selectable 8-/16-/18-bit parallel bus interfaces, an internal low-drift 4.096-V reference, and a fully differential analog input that accepts pseudo-bipolar input ranges of ±VREF around an input common-mode of +2.5V. The device supports a hardware-friendly parallel MCU/DSP interface and offers an active-low CONVST pin for precise sampling control. Architecturally, the ADS8484IBRGZR uses a charge-redistribution SAR core with input ESD diodes and on-chip reference buffer. The differential input structure rejects common-mode noise from the analog front end, while the internal reference eliminates the need for an external precision reference - simplifying BOM cost and PCB area. This makes it suitable for high-density industrial layouts where each square centimeter matters. Typical applications include industrial process control loops, multi-channel data acquisition systems (DAQ) for factory automation, medical instrumentation including portable patient monitoring, precision weigh scales, vibration analysis, optical sensor front ends, motor control current sensing, and test and measurement equipment. The wide input common-mode tolerance also suits battery-management systems where ground potentials vary across the system. When designing with this ADC, ensure the analog and digital supply pins each have local decoupling: a 10 uF tantalum plus 0.1 uF ceramic placed within 5 mm of the AVDD/DVDD pins. Keep digital return currents (DB[17:0], CONVST, /CS, /RD) physically separated from the analog return plane to avoid code-dependent noise coupling into the SAR comparator. This page synthesizes distributor pricing, drop-in alternatives including same-package ADS8484 variants, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ADS8505IDBRG4 - 16-Bit 250kSPS SAR ADC w/Parallel Interface | TI
ADS8505IDBRG4

ADS8505IDBRG4 - 16-Bit 250kSPS SAR ADC w/Parallel Interface | TI

The Texas Instruments ADS8505IDBRG4 is a 16-bit, 250-kSPS successive-approximation analog-to-digital converter with a standard ±10-V (also ±5 V and ±3.3 V) input range, integrated 2.5 V reference, and a parallel microprocessor interface, packaged in a 28-pin SSOP (DB) with tape-and-reel packaging. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data-conversion architecture that uses a binary-search algorithm against an internal DAC and comparator to resolve N bits in N clock cycles. SAR ADCs sit in the broader taxonomy of ADCs -> data converters -> signal chain ICs -> mixed-signal semiconductors, combining low power consumption, deterministic latency, and high DC accuracy. They are preferred over delta-sigma converters in multiplexed, multi-channel data-acquisition systems where latency and per-channel settling matter. Key features include ±1.5 LSB maximum INL, ±105 dB SFDR at the 250 kHz sample rate, single +5 V analog supply operation, and ±10 V true bipolar input range using on-chip input scaling resistors. The device integrates a high-bandwidth track-and-hold, internal 2.5 V reference, and 3-state output drivers, eliminating the need for an external reference or high-current bus interface. The 28-SSOP package provides a low-profile surface-mount footprint suitable for compact data-acquisition front ends. Architecturally, the ADS8505 uses a charge-redistribution capacitor DAC combined with a low-noise comparator and a precision laser-trimmed input resistor ladder. The capacitor array produces inherently low digital noise and high spurious-free dynamic range because the SAR switching pattern generates minimal kickback at the input. The internal reference and full-scale calibration registers deliver guaranteed INL/DNL across the industrial temperature range. Typical applications include industrial process control, multi-channel data-acquisition systems, instrumentation and test equipment, medical imaging front ends, and precision sensor signal conditioning. The ±10 V input range and 16-bit resolution enable direct connection to legacy industrial transducers and 4-20 mA loop receivers without external signal conditioning. When designing with this part, note that the parallel interface requires careful PCB routing to avoid digital crosstalk into the analog inputs; keep the digital bus traces short and guard the analog ground plane. The internal reference requires an external bypass capacitor; consult the datasheet for the recommended capacitor value and ESR range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a single reference for the ADS8505IDBRG4.

見積もり お問い合わせ
ADS8508IBDWRG4 - 12-Bit 250kSPS Serial CMOS ADC | Texas Instruments
ADS8508IBDWRG4

ADS8508IBDWRG4 - 12-Bit 250kSPS Serial CMOS ADC | Texas Instruments

The Texas Instruments ADS8508IBDWRG4 is a 12-bit, 250-kSPS successive-approximation-register (SAR) analog-to-digital converter with a serial interface, housed in a 20-pin SOIC (DW) wide-body package. It accepts ±3.33V, ±5V, and ±10V bipolar input ranges through an on-chip input resistor divider, and provides 73 dB SINAD, ±0.45 LSB INL typical linearity, and a single 5V analog supply. The device integrates sample-and-hold, internal clock, internal 2.5V reference, and a high-speed synchronous serial data output. An SAR ADC is a type of data converter that uses a binary-search successive approximation algorithm to digitize an analog input one bit at a time per clock cycle. SAR converters sit in the broader hierarchy: ADC -> data converter -> signal-chain IC -> mixed-signal semiconductor. They are valued for low latency, deterministic behavior, and excellent DC accuracy, making them a popular alternative to delta-sigma and pipeline architectures in multiplexed data-acquisition systems. Key features include 250 kHz throughput, hardware- or software-controlled conversion start, an external/internal clock select for the serial data frame, and TAG-input capability for multi-channel systems. The internal reference is trimmed for low drift, and the bipolar input range eliminates external signal-conditioning in industrial ±10V or ±5V transducer interfaces. The serial interface (SPI-/QSPI-/Microwire-compatible) reduces board-routing complexity versus parallel ADCs. Typical applications include industrial process control (4-20 mA loop digitization), multi-channel data-acquisition front ends, portable instrumentation, and test/measurement equipment. The wide input range supports direct connection to transducers, sensors, and bipolar signal sources without external op-amp scaling. When designing with this device, ensure the analog and digital grounds are tied at the package via a low-impedance star connection, and place 10 µF + 0.1 µF decoupling on AVDD+ and DVDD. The BW pad is the bipolar common-mode return; keep its trace short. Do not exceed 7 V absolute on analog inputs without external clamping. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ADS8509HDB - 16-Bit 250kSPS SAR ADC, ±10V In | Texas Instruments
ADS8509HDB

ADS8509HDB - 16-Bit 250kSPS SAR ADC, ±10V In | Texas Instruments

The Texas Instruments ADS8509HDB is a 16-bit, 250-kSPS, single-channel successive-approximation-register (SAR) analog-to-digital converter (ADC) with programmable (±10 V, ±5 V, or ±3.3 V) bipolar input ranges and a serial (SPI-compatible) data interface, housed in a 28-pin SSOP package rated for the high-temperature –40 °C to +175 °C operating range. An SAR ADC is a type of data converter that performs a binary search across an internal capacitor-based DAC to resolve each analog sample in a single conversion cycle, making it ideal for multiplexed data-acquisition systems where low latency and deterministic behavior matter more than raw speed. The ADS8509 family extends this architecture with bipolar true-differential inputs, a 2.5 V internal reference, and a sample-and-hold front-end that simplifies signal-chain design by eliminating the need for an external front-end buffer or precision reference. It is part of the broader category of precision ADCs in the data-converter IC segment of power management and signal-chain semiconductors. Key features include ±10 V, ±5 V, and ±3.3 V software-selectable input ranges (one resistor selects the range), a 2.5 V internal reference with optional external reference override, ±1.5 LSB maximum INL and ±1 LSB maximum DNL at the 16-bit level, and a serial data output that can be driven by either the internal conversion clock or an external data clock for system-clock synchronization. Power consumption is 75 mW typical from a single +5 V analog supply plus a +3 V to +5 V digital supply, with a hardware power-down (NAP) pin reducing quiescent current during idle windows. The device uses CMOS capacitor-based charge-redistribution SAR logic with an inherent sample-and-hold on the input pins, eliminating the need for an external track-and-hold. The digital interface supports both internal-clock and external-clock data framing, and the SYNC/INPUTRANGE pin lets the host microcontroller reconfigure the analog input range on the fly without an external analog multiplexer. Typical applications include industrial process-control PLC analog input modules, multi-channel data-acquisition (DAQ) boards, high-temperature down-hole drilling instruments, automatic test equipment (ATE) digitizer channels, and precision weigh-scale and strain-gauge signal chains where bipolar swing and 16-bit resolution together drive system accuracy. The HDB high-temperature grade also suits military and aerospace platforms that require guaranteed AC and DC behavior at +175 °C. When designing with the ADS8509HDB, place the 10 µF input-bypass capacitor and the 10 µF reference-bypass capacitor within 2 mm of the AVCC and REF pins, route the analog input traces away from the digital serial-output lines, and choose an input-range resistor of 1 % tolerance or better to maintain gain accuracy. The optional NAP pin can be asserted between conversions to drop supply current to the microampere range for battery-powered data loggers. This page synthesizes distributor pricing, drop-in same-family SAR ADC alternatives, and practical design notes that go beyond the manufacturer datasheet's typical application section.

見積もり お問い合わせ
ADS8517IDWR - 16-Bit 200kSPS Bipolar ADC | Texas Instruments
ADS8517IDWR

ADS8517IDWR - 16-Bit 200kSPS Bipolar ADC | Texas Instruments

The Texas Instruments ADS8517IDWR is a 16-bit, 200-kSPS, low-power sampling analog-to-digital converter with an internal reference and selectable parallel/serial interface, housed in a 28-pin SOIC (DW) wide-body package. It operates from a single +5 V supply and accepts true bipolar input signals of ±10 V, eliminating the need for external signal-conditioning level shifters in industrial data-acquisition front-ends. A successive-approximation-register (SAR) ADC is a precision converter that resolves one bit per clock cycle using a binary-search algorithm against an internal DAC, producing accurate, latency-free conversions ideal for multiplexed data-acquisition systems. As a member of the SAR ADC family within the broader category of analog-to-digital converters -> data acquisition ICs -> signal chain -> mixed-signal semiconductors, the ADS8517 combines a precision sampling front end with on-chip clock and reference for high integration. Key features include ±10 V or 0 V to +5 V true bipolar input range, internal 2.5 V reference with low drift, 88 dB SINAD, 200 kSPS throughput, and a flexible interface that supports both parallel (BYTE-selectable) and SPI-compatible serial outputs. The device consumes only 35 mW at 200 kSPS and drops to 5 mW in power-down, suiting battery-aware industrial designs. The 28-SOIC wide-body package provides excellent thermal performance and ease of hand-soldering for prototypes. Typical applications include industrial process control loops, multi-channel data-acquisition systems, portable or battery-powered test equipment, and precision instrumentation requiring direct bipolar signal digitization. The integrated reference simplifies BOM and layout, while the dual interface mode allows the same PCB to be used in serial-only compact modules or parallel high-speed backplanes. When designing with the ADS8517, pay attention to the input common-mode return path (the ±10 V range uses ±5 V supplies) and place a 10 µF decoupling capacitor close to the supply pin. The S/H front-end handles fast step inputs up to ±FS without charge-kick artifacts, but a small RC anti-alias filter ahead of the input is recommended.

見積もり お問い合わせ
ADS8519IDBR - 16-Bit 250kSPS SAR ADC 28-SSOP | Texas Instruments
ADS8519IDBR

ADS8519IDBR - 16-Bit 250kSPS SAR ADC 28-SSOP | Texas Instruments

The Texas Instruments ADS8519IDBR is a complete 16-bit sampling analog-to-digital converter (ADC) in a 28-pin SSOP (DB) package, using a successive approximation register (SAR) architecture with integrated sample-and-hold, internal 4.096V reference, and internal clock. It operates from a 5V analog supply and a 1.65V to 5.25V I/O supply, supporting input ranges of 8.192V, plus/minus 5V, and plus/minus 10V at up to 250kSPS. An analog-to-digital converter (ADC) converts continuous analog signals into discrete digital values for digital processing. The SAR ADC family uses a binary search algorithm with a capacitor-based DAC, offering an excellent balance of resolution, speed, and power for data acquisition systems, sitting between slower delta-sigma converters and faster pipeline ADCs in the signal conversion hierarchy. Key features include 93dB SNR with a 20kHz input, plus/minus 1.5LSB maximum integral nonlinearity (INL), plus/minus 1LSB maximum differential nonlinearity (DNL) with 16 bits no missing codes, and a SPI-compatible serial output with daisy-chain (TAG) capability and 3-state bus. Typical power dissipation is only 110mW at 250kSPS, making it well suited to power-sensitive designs. Technically, the capacitor-based SAR core with sample-and-hold accurately captures fast-changing signals, while the internal clock and reference eliminate external precision components. The wide 1.65V to 5.25V I/O supply range allows direct interfacing with 1.8V or 3.3V microcontrollers and FPGAs without level shifters. The pinout is similar to the 16-bit ADS7809 and the 12-bit ADS7808 and ADS8508, easing family upgrades. Typical applications include industrial process control, multi-channel data acquisition systems, medical instrumentation, and test and measurement equipment, where the high SNR and low INL support precision measurements and the daisy-chain serial interface simplifies multi-ADC configurations. Design tip: decouple the analog supply with 0.1uF and 10uF capacitors placed close to the pins, bypass the reference input with 10uF, and use separate analog and digital ground planes to minimize noise coupling into the 16-bit conversion result.

見積もり お問い合わせ
ADS8519IDBR-Q1 - 16-Bit 250kSPS SAR ADC | Texas Instruments
ADS8519IDBR-Q1

ADS8519IDBR-Q1 - 16-Bit 250kSPS SAR ADC | Texas Instruments

The Texas Instruments ADS8519IDBR-Q1 is a complete 16-bit sampling analog-to-digital converter (ADC) in a 28-pin SSOP (DB) package. Built on state-of-the-art CMOS structures, it integrates a capacitor-based successive approximation register (SAR) ADC with sample-and-hold, 4.096V internal reference, clock, and SPI-compatible serial data interface, delivering 250kSPS throughput. An ADC (analog-to-digital converter) is a data converter that transforms continuous analog signals into discrete digital values. Within the converter hierarchy, the SAR (successive approximation register) architecture offers an optimal balance of resolution, speed, and low power for medium-rate acquisition systems, sitting between slower delta-sigma converters and faster pipeline ADCs. Key features include 0V to 8.192V, plus/minus 5V, and plus/minus 10V input ranges; 93dB SNR with a 20kHz input; plus/minus 1.5LSB maximum INL and plus/minus 1LSB maximum DNL with 16 bits no missing codes; an SPI-compatible serial output with daisy-chain (TAG) feature and 3-state bus; and a 5V analog supply with a wide 1.65V to 5.25V I/O supply. Data can be clocked out using the internal clock or synchronized to an external data clock. The pinout is similar to the 16-bit ADS7809 (low-speed) and the 12-bit ADS7808 and ADS8508, simplifying migration across resolution tiers. The device is fully specified over the industrial -40C to +85C temperature range. Typical applications include automotive and industrial data acquisition, multi-channel instrumentation with daisy-chained converters, motor-control feedback, and test equipment front ends. Design tip: decouple the internal reference with a low-ESR capacitor and drive the input through a low-impedance buffer (e.g., THS-series op amp) to preserve the 93dB SNR; ensure the digital host can honor the conversion timing at 250kSPS.

見積もり お問い合わせ
ADS8568SPM - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI
ADS8568SPM

ADS8568SPM - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI

The Texas Instruments ADS8568SPM is a 16-bit, 8-channel, simultaneous-sampling, bipolar-input, successive-approximation-register (SAR) analog-to-digital converter (ADC) housed in a 64-pin LQFP (PM) package measuring 10x10 mm. The device integrates eight individual SAR ADCs with true bipolar input ranges of ±10 V or ±5 V, achieves up to 540 kSPS per channel in parallel interface mode, and consumes only 335 mW total at full throughput. A SAR ADC (Successive Approximation Register analog-to-digital converter) is a precision data-conversion architecture that uses a binary-search algorithm against an internal DAC to produce a digital code in N conversion cycles for N bits of resolution. SAR ADCs are prized for deterministic latency, excellent DC accuracy, and low power consumption, sitting in the hierarchy alongside pipeline, sigma-delta, and flash converters as one of the four principal ADC architectures. Simultaneous-sampling variants like the ADS8568 capture all eight channels on the same internal clock edge, eliminating inter-channel skew that would otherwise corrupt polyphase measurements in power-line monitoring, motor control, and multi-axis data acquisition. Key features include on-chip analog input clamp protection, a second-order anti-aliasing filter per channel, integrated track-and-hold amplifiers, flexible serial or parallel digital interfaces, and an auto-sleep mode that drops quiescent current between conversions. The bipolar input architecture eliminates external signal-conditioning circuitry for industrial ±10 V or ±5 V signals, simplifying board design and improving noise immunity in harsh environments. The integrated reference and reference-buffer reduce external component count, while a hardware reset pin and software reset word simplify multi-device synchronization. The ADS8568 forms part of a pin-compatible family alongside the 12-bit ADS8528 and 14-bit ADS8548, allowing designers to migrate resolution without reworking the PCB. The dual supply rails (AVDD 5 V, DVDD 2.7 V-3.6 V) are typical for high-voltage industrial signal chains and pair naturally with a low-noise LDO such as the TPS7A4701 on the analog rail. Typical applications include three-phase power-line monitoring, multi-axis motor control, industrial process control, simultaneous-sampled multi-channel data-acquisition systems, and protection relays. Choose the ADS8568SPM when true bipolar inputs and deterministic channel-to-channel phase alignment are mandatory for your measurement algorithm.

見積もり お問い合わせ
ADS8568SPMR - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI
ADS8568SPMR

ADS8568SPMR - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI

The Texas Instruments ADS8568SPMR is a 16-bit, 8-channel, simultaneous-sampling, bipolar-input, successive approximation register (SAR) analog-to-digital converter (ADC) housed in a 64-pin LQFP (PMR) package with 10x10 mm body size. It delivers up to 510 kSPS per channel in parallel (PAR) interface mode or 400 kSPS per channel in serial (SER) interface mode, with a signal-to-noise ratio of 91.5 dB and total harmonic distortion of -94 dB typical. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes, serving as the bridge between the analog physical world and the digital processing domain. SAR ADCs use a binary search algorithm implemented with a capacitive DAC and comparator to achieve a deterministic conversion time of one clock cycle per code bit, offering an attractive balance of speed, resolution, and power consumption compared to delta-sigma or pipeline architectures. Simultaneous-sampling ADCs like the ADS8568SPMR integrate eight independent sample-and-hold amplifiers that capture all eight input channels at exactly the same instant, which is essential for phase-coherent multi-phase measurements in power, motor control, and instrumentation systems. Key features of the ADS8568SPMR include software-configurable input ranges of +/-10 V or +/-5 V (true bipolar), on-chip sequencer, low power consumption, and pin- and software-compatibility with the 12-bit ADS8528 and 14-bit ADS8548 family members, allowing engineers to migrate designs across resolution grades without PCB changes. The integrated analog input clamp protection and second-order anti-aliasing filter simplify front-end design. Typical applications include three-phase power-line monitoring and protection relays, multi-axis motor control, simultaneous data acquisition (DAQ) systems, instrumentation and medical imaging, and industrial process control. The 64-LQFP (PMR) package supports standard surface-mount reflow assembly and provides sufficient thermal mass for industrial temperature operation. When designing with the ADS8568SPMR, pay attention to analog input common-mode and bypass capacitor placement, and verify that the throughput rate is supported in either parallel or serial mode per your MCU/FPGA interface constraints. The bipolar input range eliminates the need for external signal conditioning in most +/-10 V industrial applications.

見積もり お問い合わせ
ADS8586SIPM - 16-Bit 200kSPS 6-Ch Simultaneous-Sampling ADC | TI
ADS8586SIPM

ADS8586SIPM - 16-Bit 200kSPS 6-Ch Simultaneous-Sampling ADC | TI

The Texas Instruments ADS8586SIPM is a 16-bit, 200-kSPS, 6-channel, simultaneous-sampling successive-approximation-register (SAR) analog-to-digital converter (ADC) with true bipolar input ranges on a single 5V supply, housed in a 64-pin LQFP (PM, 10x10 mm) package. It integrates a complete analog front-end per channel — a programmable-gain amplifier (PGA) with 1 MΩ input impedance, input clamp protection, and a low-drift reference — together with on-chip digital signal averaging and a high-speed serial (SPI-compatible) or parallel back-end interface. A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary search across an internal capacitive DAC to resolve each conversion in N bit-cycles, yielding low latency, deterministic throughput, and no pipeline delay — ideal for multiplexed control loops and multi-axis motion systems. The ADS8586S sits within the broader data-converter / data-acquisition IC hierarchy: ADC → simultaneous-sampling ADC → integrated DAQ system → signal-chain IC → semiconductor. By integrating the front end, reference, and six sample-and-hold amplifiers, the part eliminates external signal conditioning and preserves channel-to-channel phase alignment to within a single clock cycle. Key specifications from this site are: 16-bit resolution, 200-kSPS per-channel sampling, 6 fully-differential/single-ended bipolar input channels, integrated PGA with software-selectable input ranges (typically ±10V and ±5V at 5V supply), 1 MΩ minimum input impedance, integrated low-drift voltage reference, SPI/parallel/byte interface options, and an operating junction range of −40°C to +125°C. The wide bipolar range and high input impedance let the device sit directly behind ±10V or ±5V transducer signals without external scaling or buffering. Typical applications include three-phase power-line monitoring and protection relays, multi-axis motor-control feedback (servo drives, robotics, CNC), industrial process control and PLC analog input modules, power-quality analyzers and energy meters, programmable-logic-controller (PLC) analog front-ends, and medical multi-channel patient-monitoring instrumentation. The simultaneous sampling makes it well-suited to any system where phase relationships between signals matter — power measurement, vibration analysis, and motor control being the canonical use cases.

見積もり お問い合わせ
ADS8688IDBT - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments
ADS8688IDBT

ADS8688IDBT - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments

The Texas Instruments ADS8688IDBT is a 16-bit, 500kSPS, 8-channel, single-supply successive-approximation-register (SAR) analog-to-digital converter with integrated analog front-end (AFE) circuitry and bipolar input ranges, housed in a 38-pin TSSOP (DBT) package. The device operates from a single 5V analog supply with a digital I/O supply from 1.65V to 5.25V, supports input ranges up to ±12V with ±20V overvoltage protection per channel, and integrates an 8-channel multiplexer with automatic and manual scan modes plus a low-drift on-chip 4.096V reference. A SAR ADC is a successive-approximation-register analog-to-digital converter that performs a binary search across an internal capacitive DAC to digitize each input sample in one conversion cycle. SAR ADCs offer deterministic latency, no pipeline delay, and excellent DC accuracy, making them the converter of choice for multiplexed data-acquisition front ends, industrial control loops, and precision instrumentation. The ADS8688IDBT sits in the data-acquisition IC taxonomy as: ADC -> SAR ADC -> multi-channel data-acquisition system -> precision analog IC. Key features include 500 kSPS throughput, 16-bit resolution with no missing codes, ±20V overvoltage-tolerant analog inputs, integrated 8-channel AFE, low-drift 4.096V internal reference with REF-by-default pin mode, and an SPI-compatible serial interface that supports daisy-chaining of multiple devices. The device also includes per-channel programmable input ranges (±12V, ±10V, 0-10V, 0-5V, ±5V) via software configuration and an ALARM/SDO-ABS pin for threshold detection. The architecture combines a charge-redistribution SAR core with a high-impedance input clamp, input signal conditioning, and an 8:1 input mux. The integrated reference reduces external component count, while the 1.65V-5.25V digital supply enables direct connection to 1.8V, 3.3V, and 5V host controllers without level shifters. Per the TI product page, the device is designed for high-channel-count precision measurement where board area and BOM cost are critical. Typical applications include industrial process control PLC analog input modules, power automation and protection relays, multi-axis motor drive feedback, battery management system (BMS) cell monitoring, medical instrumentation signal acquisition, and factory-automation sensor aggregation. The bipolar input ranges make it directly compatible with ±10V industrial sensors without external signal conditioning. When designing with this device, observe proper analog/digital ground partitioning on the PCB and place the 10uF + 1uF AVDD decoupling network within 5mm of the AVDD pin. For optimum performance, use the device's internal reference with the REF-by-default configuration and avoid driving high-impedance sources directly into the analog inputs without a series resistor to limit input current during fault conditions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the TI product page or distributor listings.

見積もり お問い合わせ
ADS8688IDBTR - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments
ADS8688IDBTR

ADS8688IDBTR - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments

The Texas Instruments ADS8688IDBTR is a 16-bit, 500-kSPS, 8-channel, single-supply SAR analog-to-digital converter with bipolar input ranges and an integrated analog front-end, housed in a 38-pin TSSOP (DBT) package. The converter integrates an 8-channel input multiplexer with auto and manual scan, per-channel programmable input ranges (±10.24 V, ±5.12 V, ±2.56 V bipolar; 10.24 V, 5.12 V unipolar), and operates from a 5-V analog supply. The ADC delivers 500 kSPS throughput across the full input range with no latency between channels. A SAR (Successive-Approximation Register) ADC is a sampling architecture that converts an analog input to a digital code using a binary-search algorithm against an internal precision DAC. Compared with delta-sigma or pipeline ADCs, SAR converters offer deterministic latency, low power, and excellent multi-channel throughput, making them ideal for multiplexed data-acquisition systems in industrial control, instrumentation, and motor-drive applications where the control loop must react within a known time after each conversion. Key features include ±1-LSB (max) linearity, a low-noise 4-ppm/°C internal reference, an SPI-compatible daisy-chainable serial interface, and a 1.65-V to 5.25-V digital supply that allows direct connection to most host MCUs and FPGAs without level translators. An on-chip input protection clamp handles ±20-V over-voltage on every analog input channel. The architecture pairs a charge-redistribution SAR core with a high-bandwidth input driver, allowing true ±10-V bipolar measurements from a single 5-V rail - a key advantage in legacy industrial systems where the signal swings can exceed the supply. Per-channel range scaling lets the designer optimize dynamic range for each transducer type, and a hardware reset pin and daisy-chain logic simplify synchronization when stacking multiple ADS8688/ADS8684 devices on the same SPI bus. Typical applications include PLC analog input modules, multi-axis motor-drive feedback, industrial process-control transmitters, power-metering front-ends, and multi-channel data-acquisition cards for test and measurement equipment. The 8-channel integration cuts board area versus discrete ADCs and reduces BOM cost. When designing with this device, place the 10-µF AVDH bypass capacitor within 5 mm of the AVDH pin and route AVDD separately from DVDD to avoid digital noise coupling into the analog front-end. For best THD in audio-bandwidth front ends, average the per-channel offset calibration coefficients programmed into each channel's OFFSET register at power-up. This page synthesizes distributor pricing, drop-in same-package alternatives, and layout guidance that complements the manufacturer datasheet to accelerate multi-channel data-acquisition design.

見積もり お問い合わせ
ADS8887 - 18-Bit 100kSPS True-Differential SAR ADC | TI
ADS8887

ADS8887 - 18-Bit 100kSPS True-Differential SAR ADC | TI

The Texas Instruments ADS8887 is an 18-bit, 100-kSPS, true-differential input, successive approximation register (SAR) analog-to-digital converter. It operates with a 2.5-V to 5-V external reference, offering a wide selection of signal ranges without additional input signal scaling. The reference voltage setting is independent of, and can exceed, the analog supply voltage (AVDD). Available in a miniature 10-pin VSSOP (DGS) package, the ADS8887 targets space-constrained designs requiring high precision and low power. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output, consisting of a comparator, a capacitive DAC, and successive approximation logic. SAR ADCs, a subset of data converters in mixed-signal electronics, are known for high speed, low power, and excellent accuracy in data acquisition, industrial process control, and medical instrumentation. Key features include 18-bit resolution, a 100 kSPS maximum sampling rate, and a true-differential input that rejects common-mode noise. The device runs from a single 2.7-V to 3.6-V analog supply with a separate digital supply for the serial interface. An external reference between 2.5 V and 5 V lets designers optimize the input range per application. A power-down mode reduces current to microamperes, suiting battery-powered systems. Technically, the ADS8887 uses a charge-redistribution SAR architecture with a capacitive DAC, achieving INL of ±1 LSB and SNR of 100 dB. An internal oscillator and track-and-hold circuit reduce external component count. The SPI-compatible serial interface supports 3-wire and 4-wire modes and daisy-chaining for multi-channel systems; the 10 MHz input bandwidth accurately samples high-frequency signals. Typical applications include precision data acquisition, industrial automation, medical imaging, and portable instrumentation. The true-differential input makes it ideal for bridge sensors, thermocouples, and other differential signal sources, plus battery-powered data loggers and IoT devices. Design tip: provide a low-impedance reference source, bypass the reference with a 10-uF capacitor, and drive the analog input from a low-impedance source such as an op amp to achieve full datasheet performance.

見積もり お問い合わせ
ADS8900B - 20-Bit 1-MSPS SAR ADC with Ref Buffer | TI
ADS8900B

ADS8900B - 20-Bit 1-MSPS SAR ADC with Ref Buffer | TI

The Texas Instruments ADS8900B is a 20-bit, 1-MSPS, single-channel successive-approxistration-register (SAR) analog-to-digital converter (ADC) featuring an integrated reference buffer and an integrated low-dropout regulator (LDO). It belongs to the pin-to-pin compatible ADS890xB family alongside the ADS8902B and ADS8904B, with 18-bit (ADS891xB) and 16-bit (ADS892xB) resolution variants available in the same VQFN-20 (RGE) footprint. A SAR ADC converts an analog input to a digital output using a binary search algorithm with a capacitive DAC and precision comparator. SAR converters occupy a key position in the data acquisition signal chain, balancing speed, resolution, and power for microcontroller and DSP-based systems. Key features include 1-MSPS sampling at 20-bit resolution, ±1 ppm integral nonlinearity (INL), and 104.5 dB SNR under typical conditions. The device supports unipolar, fully differential, and pseudo-differential analog inputs. The integrated reference buffer eliminates the need for a high-bandwidth external reference buffer, and the integrated LDO enables simplified power tree design. The SPI-compatible serial interface supports daisy-chain and multi-device configurations. The ADS8900B uses a high-speed capacitive-DAC SAR architecture achieving excellent linearity and low noise. Typical power consumption is approximately 15 mW at 1 MSPS from a 3.3V analog supply and 1.8V digital supply, suiting space-constrained precision designs. Typical applications include industrial automation and process control, power quality monitoring, medical instrumentation, and automated test equipment, where the ±1 ppm INL and 104.5 dB SNR directly improve measurement accuracy. Design consideration: decouple analog and digital supplies thoroughly and evaluate the integrated LDO-generated reference versus a low-noise external reference such as the REF5030A for the highest-accuracy systems.

見積もり お問い合わせ
ADS901E/1K - 10-Bit 20MSPS +3V ADC | Texas Instruments
ADS901E/1K

ADS901E/1K - 10-Bit 20MSPS +3V ADC | Texas Instruments

The Texas Instruments ADS901E/1K is a 10-bit, 20 MSPS pipelined analog-to-digital converter operating from a single +3V supply, supplied on a 1000-piece Tape and Reel in a 28-pin SSOP (DB) package. The converter integrates a wideband 350 MHz track-and-hold front end, a 10-bit quantizer, and on-chip reference buffering, with an externally adjustable full-scale input range that allows direct interfacing to single-ended or differential sources. Typical power consumption is only 48 mW at +3V in active mode, dropping to 15 mW in power-down, making it well suited to portable and battery-powered equipment. What is a pipelined ADC: A pipelined analog-to-digital converter is a high-speed Nyquist-rate ADC architecture that processes the input sample in multiple cascaded low-resolution stages, each stage driving the next while a sample-and-hold captures the next input. This architecture trades a small fixed conversion latency (typically 3 to 5 clock cycles) for very high sampling rates at moderate resolution, sitting in the hierarchy between flash ADCs (fastest but power-hungry) and successive-approximation ADCs (low power but slow). Pipelined ADCs are the workhorse architecture for video, communications, and imaging digitizers, where 10-14 bits of resolution at 10-200 MSPS is required. The ADS901E/1K delivers no missing codes at 10-bit resolution and supports a single +2.7V to +3.7V supply rail. The wideband 350 MHz track-and-hold preserves high-frequency input harmonics on the way to the quantizer, allowing IF-sampling and accurate digitization of fast transients. Its externally adjustable full-scale range, set by the REF and REFCAP pins, lets the system designer trade dynamic range against noise floor without changing the analog front end. The device is offered in a low-power SSOP-28 (DB) surface-mount package rated for the -40C to +85C industrial temperature range. Typical applications include digital still cameras, camcorders, video capture cards, set-top boxes, portable test instruments, and battery-powered imaging equipment. The combination of 20 MSPS sampling, low 48 mW power, and 3V single-supply operation makes the ADS901E/1K especially attractive for handheld designs where heat dissipation and battery life dominate the BOM. Designers should pair the converter with a low-jitter clock source and a properly buffered analog input network; the document number cited in TI's product folder for this device is the SBAS026 family datasheet.

見積もり お問い合わせ
ADS901E/1KG4 - 10-Bit 20MSPS 3V Pipelined ADC | Texas Instruments
ADS901E/1KG4

ADS901E/1KG4 - 10-Bit 20MSPS 3V Pipelined ADC | Texas Instruments

The Texas Instruments ADS901E/1KG4 is a 10-bit, 20-MSPS pipelined analog-to-digital converter operating from a single +3V supply, housed in a 28-pin SSOP package with 5.30 mm body width. The device integrates a wide-bandwidth track-and-hold amplifier, a 10-bit quantizer, and an internal reference structure, drawing 60 mW typical power at full 20 MSPS. Its pipelined architecture delivers one sample per clock with low pipeline latency while supporting a single-ended or differential analog input selectable per application. A pipelined ADC is a high-speed converter architecture that uses multiple low-resolution flash stages connected in series, with each stage resolving a portion of the input on successive clock cycles. The pipelined topology (ADC -> pipelined ADC -> high-speed data converter -> data acquisition IC -> signal chain IC) is the dominant choice for sample rates from 5 MSPS to several hundred MSPS because it balances resolution, speed, and power efficiency. The ADS901 belongs to TI's SpeedPlus family, optimized for low-voltage, low-power applications such as portable imaging, digital communication basebands, and consumer video. Key features include 10-bit resolution, 20 MSPS maximum sample rate, 3V single-supply operation, an industrial -40C to +85C temperature range, and a pipelined converter type. The parallel CMOS-compatible output interface simplifies connection to ASICs, FPGAs, and DSPs. The wide-bandwidth track/hold front end preserves signal integrity well beyond the Nyquist frequency, and the full-scale input range is set by external reference resistors to optimize dynamic range for a given signal source. Typical applications include digital still cameras, digital video camcorders, set-top box video digitizers, communications baseband processing, and portable test equipment. The 3V supply and 60 mW power make it particularly attractive for battery-powered or thermally constrained designs where high-speed conversion is required without the bulk of a 5V analog front end. When designing with the ADS901, ensure the analog input is AC-coupled or level-shifted to remain within the input common-mode range, and place the external reference decoupling capacitors as close to the REF pin as possible. Use a continuous ground plane under the device to minimize digital feedthrough into the analog section, and follow TI's recommended layout in the datasheet for optimal SFDR performance. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on a typical distributor listing.

見積もり お問い合わせ
ADSP-1401JN - 16-Bit Microprogram Sequencer | Analog Devices
ADSP-1401JN

ADSP-1401JN - 16-Bit Microprogram Sequencer | Analog Devices

The Analog Devices ADSP-1401JN is a 16-bit bit-slice microprocessor sequencer in a 48-pin PDIP package. The verified product data identifies it as a microprogram sequencer, an embedded processor and controller, and a commercial-temperature component with through-hole mounting. Its DIP-48 package exposes 48 terminals in a rectangular dual in-line physical format, making it suitable for legacy industrial, instrumentation, and control-system designs that use through-hole PCB layouts. A bit-slice processor is a specialized microprocessor architecture that processes information in parallel slices, commonly using wider internal word organizations assembled from narrower bit-oriented processing elements. A microprogram sequencer coordinates instruction sequencing and control-flow operations for the associated processor architecture. The ADSP-1401JN therefore belongs to the embedded processor and controller hierarchy rather than general-purpose microcontrollers or modern digital signal processors. The verified specifications identify the device as a 16-bit microprogram sequencer with a bit-slice processor architecture. They also confirm commercial temperature grade, a PDIP-48 package, through-hole terminal form, 48 terminals, and a DIP package code. The available data does not state the supply voltage, clock frequency, memory interface, instruction set details, operating-temperature limits, or absolute maximum ratings; these parameters require confirmation from the original Analog Devices documentation before a new design is released. Typical legacy uses include digital signal processing front ends, programmable control logic, instrumentation, industrial automation, and embedded systems where a through-hole bit-slice sequencer is already supported by the surrounding processor architecture. The DIP-48 package favors prototype boards, repair work, and systems designed around older manufacturing processes. Its 48 through-hole terminals simplify socket use and inspection, although the larger footprint requires more board area than a modern surface-mount package. Designers should preserve the original processor-family support requirements, pin-level voltage compatibility, clocking method, and bus timing when replacing or adapting this part. Because the available data does not confirm a manufacturer datasheet URL or a complete electrical specification set, production use should begin with the original ADI documentation and an inspection of the actual sourced device. The ADSP-1401JN is primarily valuable as a documented legacy processor component rather than as a modern general-purpose controller. This page combines the verified package, architecture, commercial-grade, sourcing, and category information with practical sourcing and design context. Because the supplied search results do not provide enough verified alternative MPNs, pin mappings, or electrical parameters to establish pin-to-pin replacements, substitute parts are intentionally not fabricated.

見積もり お問い合わせ
ADSP-1401KP - 16-Bit Microprogram Sequencer | Analog Devices
ADSP-1401KP

ADSP-1401KP - 16-Bit Microprogram Sequencer | Analog Devices

The Analog Devices ADSP-1401KP is a 16-bit bit-slice processor and microprogram sequencer designed for programmable digital signal processing and sequencing systems, supplied in a 48-pin plastic leaded-chip carrier package. Verified distributor information identifies the device as a word-slice programmable sequencer with a commercial temperature grade and J-bend terminals. A bit-slice processor is a specialized digital processor architecture that processes multiple data bits in parallel under microprogram control. Within the broader hierarchy of digital signal processors and embedded processors, the ADSP-1401KP provides sequencing logic for systems requiring configurable instruction sequencing rather than a conventional standalone application processor. Its architecture supports digital control, signal-processing, and industrial automation applications. Verified listings identify the ADSP-1401KP as a 16-bit microprogram sequencer. Other descriptions characterize it as a bit-slice processor with a 48-DIP package, while one distributor record reports 52 terminals and package code QCCJ. The supplied data does not establish whether those 52 positions include programming pins, thermal or power terminals, or another package convention, so that detail requires confirmation from the manufacturer datasheet. Typical implementation requires a reliable microprogram store, address and control buses, clocking, reset, and appropriate input/output interfacing. Because the device is a specialized sequencing IC rather than a general-purpose microprocessor, software algorithm development alone is insufficient; designers must also verify timing, bus behavior, program-memory requirements, and package-level pin assignments against the original documentation. Suitable applications include programmable industrial control systems, digital signal-processing subsystems, test and measurement sequencing, and embedded sequencing controllers. Commercial-grade sourcing should be checked against the required ambient temperature, supply arrangement, qualification level, and end-market standards before design release. The primary design consideration is source continuity: distributor pricing varies sharply, with one verified listing showing a $52.2356 starting price and another showing a $380.33 unit-price starting point. Engineers should compare authorized-channel availability, condition, traceability, and the exact package code before treating a listing as a production alternate. This page consolidates verified distributor pricing, package and category data, practical sourcing considerations, and available replacement evidence. It distinguishes verified attributes from unresolved parameters and avoids presenting unconfirmed electrical limits as guaranteed datasheet specifications.

見積もり お問い合わせ
ADSP-1410JD - 16-Bit DSP Address Sequencer | Analog Devices
ADSP-1410JD

ADSP-1410JD - 16-Bit DSP Address Sequencer | Analog Devices

The Analog Devices ADSP-1410JD is a 16-bit bit-slice microprocessor and microprogram sequencer with a 10 MHz clock frequency, housed in a 48-CDIP side-brazed ceramic DIP package. It provides commercial-temperature operation and is identified by distributor listings as an FFT/DSP address sequencer. The ADSP-1410JD operates from a nominal 5 V supply and uses a 16-bit external data bus, combining a specialized digital signal processor architecture with microprogrammed control for demanding sequencing tasks. Its 48-terminal through-hole ceramic package reflects its legacy high-reliability industrial positioning. A bit-slice processor is a digital signal processor implementation in which multiple narrow processing slices operate in parallel to form a wider arithmetic word. The ADSP-1410 belongs to this processor family, while its microprogram sequencer controls instruction sequencing and address generation. Within the hierarchy of signal processing, it is a specialized DSP rather than a general-purpose microcontroller, making it useful where deterministic address sequencing or FFT/DSP-oriented control is required. Key verified characteristics include a 16-bit external data bus width, a nominal 5 V supply, a 10 MHz maximum clock frequency, 48 terminals, commercial temperature grade, and through-hole mounting. The ceramic side-brazed DIP package provides mechanical robustness for industrial systems and legacy equipment. Distributor records also describe the device as a bit-slice microprocessor with a microprogram sequencer, emphasizing its specialized architecture rather than conventional software-controlled execution. The ADSP-1410JD is positioned for legacy digital signal processing, FFT/DSP address sequencing, industrial control, communications infrastructure, and equipment requiring a dedicated high-speed sequencing engine. Because public search results do not expose a complete official pinout or detailed timing tables, system integrators should obtain the manufacturer documentation before making board-level substitutions or timing decisions. A key design constraint is supply and clock integrity. A nominal 5 V operating rail should be generated with suitable bypass decoupling, while the 10 MHz clock must be clean and stable to avoid sequencing errors. Existing systems should preserve the original footprint, pin assignments, voltage requirements, and clocking scheme; functional similarity alone does not establish drop-in compatibility. This page combines verified distributor specifications, package and sourcing details, application guidance, and qualification limits for the ADSP-1410JD. It also distinguishes confirmed technical facts from information that still requires the original manufacturer datasheet, helping engineers evaluate procurement and redesign decisions without overstating equivalence.

見積もり お問い合わせ
ADSP-1410JN - 10 MHz 16-Bit CMOS Bit-Slice Processor | Analog Devices
ADSP-1410JN

ADSP-1410JN - 10 MHz 16-Bit CMOS Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410JN is a 16-bit CMOS bit-slice microprocessor with a 10 MHz clock, a 16-bit external data bus, a microprogram sequencer, and a 48-terminal PDIP package. It is designed for specialized digital signal-processing, control, and microprogramming systems requiring programmable word-slice processing rather than a conventional fixed instruction sequence. What is a bit-slice processor? A bit-slice processor is a digital processor architecture that divides word-level operations into parallel slices. Each slice processes a portion of the data word, while neighboring devices or internal slices can be combined for wider arithmetic and data paths. This architecture is useful when a system needs flexible word width, high-throughput parallel operations, or microprogrammed control sequences for specialized signal-processing equipment. The verified product information identifies the ADSP-1410JN as a 16-bit microprogram sequencer in a PDIP48 package. It operates from a nominal 5 V supply and supports a 10 MHz clock frequency. The device is described as a CMOS bit-slice processor with a 48-terminal through-hole package and a rectangular DIP form factor. These characteristics place it in the specialized processor and digital signal-processing controller category rather than the general-purpose microcontroller category. Key engineering features include the 16-bit external data-bus width, 10 MHz operating clock, microprogram sequencer architecture, CMOS implementation, and 48-terminal PDIP package. The microprogram sequencer provides a flexible mechanism for controlling instruction sequences, while the external bus width influences how the device connects to memory, peripherals, and parallel processing elements. Because the available verified data does not include detailed electrical timing, instruction-set, memory-interface, or absolute maximum ratings, those parameters require confirmation from the manufacturer datasheet before design release. Typical applications include specialized industrial control systems, bit-signal processing, programmable sequencing, embedded test equipment, and legacy digital signal-processing platforms. The part may be suitable where an established system already uses the ADSP-1410 family and requires a through-hole 48-pin controller rather than a modern surface-mount microcontroller. Its legacy architecture and limited publicly surfaced documentation make exact replacement particularly dependent on pinout, instruction compatibility, timing, and system-level support requirements. Designers should treat the ADSP-1410JN as a system-specific component. Before substitution, verify the package pin assignments, supply tolerances, clock requirements, bus behavior, reset requirements, and microprogram storage interface against the original system documentation. The DIP-48 package facilitates prototype insertion and socketed maintenance, but modern production designs often favor smaller surface-mount packages or newer processors with richer tooling and documentation. This page synthesizes the verified distributor specifications, package information, sourcing links, and practical legacy-component considerations for engineers evaluating the ADSP-1410JN in established signal-processing and microprogrammed-control equipment.

見積もり お問い合わせ
ADSP-1410KD - 16-Bit Bit-Slice Processor | Analog Devices
ADSP-1410KD

ADSP-1410KD - 16-Bit Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410KD is a 16-bit bit-slice microprocessor designed as a microprogram sequencer for address generation, with a 16-bit external data bus and a maximum clock frequency of 11.11 MHz. The device is packaged in a 48-pin ceramic side-brazed DIP and is intended for specialized signal-processing, communications, and control systems. A bit-slice processor is a specialized microprocessor architecture in which functional units operate on selected portions of a wider machine word. The ADSP-1410KD belongs to the broader processor hierarchy that includes microprogram sequencers, digital signal processors, and general-purpose microprocessors. Its primary role is to sequence operations and generate addresses rather than provide the general-purpose compute throughput of a modern CPU. The ADSP-1410KD uses a 5 V power supply and is specified for a maximum supply current of 75 mA. Its 16-bit external data bus provides the principal data path for the surrounding system, while the 48-terminal package supports the address, control, data, and programming signals required by this legacy processor architecture. The KD suffix identifies the ceramic side-brazed DIP package option described by the verified distributor data. The device is particularly suited to applications requiring deterministic microprogrammed sequencing, including FFT and DSP address sequencing, communications control, and specialized instrumentation. Because it is a legacy bit-slice processor, new designs should confirm availability, software support, and system-level interoperability before committing to it. Design work should preserve the required clocking, address sequencing, and bus timing conventions of the original architecture. Power and signal-integrity planning should also account for the 5 V supply requirement and the through-hole ceramic package. The original manufacturer documentation should be consulted for complete timing, pin-level, and programming details. This product page combines the verified ADSP-1410KD specifications, package information, sourcing links, and practical selection guidance for engineers evaluating this specialized processor in legacy or maintenance-oriented systems.

見積もり お問い合わせ
ADSP-1410TD - 10 MHz 16-Bit Bit-Slice Processor | Analog Devices
ADSP-1410TD

ADSP-1410TD - 10 MHz 16-Bit Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410TD is a 16-bit CMOS bit-slice microprocessor and microprogram sequencer with a 10 MHz maximum clock frequency, 48 terminals, and a military-temperature through-hole ceramic DIP package. Its architecture is suited to high-speed control, signal-processing, and specialized instruction-sequencing systems where a programmable processor is needed rather than a general-purpose microcontroller. What is a bit-slice processor? A bit-slice processor is a modular digital processing architecture that operates on slices of a machine word. Multiple slices can be combined to form wider datapaths, allowing designers to balance throughput, word width, cost, and implementation complexity. The ADSP-1410TD belongs to the broader processor and embedded-controller hierarchy, combining microprogram sequencing with a 16-bit data-bus-oriented implementation. Key verified features include a 5 V supply condition, 10 MHz maximum clock frequency, 16-bit data-bus width, 48 terminals, military temperature grade, and through-hole DIP construction. The ceramic side-brazed package provides a mechanically robust option for legacy and industrial equipment. The device is identified as a microprogram sequencer, so its usefulness depends on the associated instruction set, system timing, memory interface, and external logic implementation. The ADSP-1410TD is associated with programmable sequencing and parallel digital-processing functions rather than ordinary standalone application processing. Its 10 MHz clock and 16-bit bus provide a defined timing and data-width framework for systems that can be designed around its architecture. The military-grade designation also makes it relevant to equipment requiring an extended environmental qualification target, subject to the manufacturer’s exact ordering and test documentation. Typical design contexts include industrial automation, communications control, embedded signal-processing controllers, test systems, and legacy equipment upgrades. When evaluating it for a new design, verify the complete datasheet, timing diagrams, pin definitions, memory organization, instruction set, and supply requirements. Because the available verified data identifies the package and major capabilities but does not provide every electrical or timing parameter, design decisions should not rely on unspecified values. This page consolidates the verified distributor and marketplace information for the ADSP-1410TD, including pricing context, package details, application guidance, and procurement caveats. It is intended as an engineering-oriented product reference rather than a substitute for the original manufacturer documentation.

見積もり お問い合わせ