集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,700+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 640+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,100+ 製品 📁 インターフェースIC 3,100+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 450+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (38,000+)

TLE7268SKXUMA1 - Dual 20 kbps LIN Transceiver | Infineon
TLE7268SKXUMA1

TLE7268SKXUMA1 - Dual 20 kbps LIN Transceiver | Infineon

Infineon Technologies TLE7268SKXUMA1 is an automotive dual LIN 2.2 transceiver that integrates two independent single-wire LIN transceivers in one PG-DSO-14 package. Each channel supports transmission rates up to 20 kbps, and the device is compliant with ISO 17987-4, LIN Specification 2.2 A, and SAE J2602. Its integrated interfaces are designed for 3.3 V and 5 V digital I/O levels, allowing connection to automotive body controllers, gateways, and other LIN nodes. The TLE7268SKXUMA1 also provides very low Sleep-mode current consumption with wake-up capability and very low leakage on the BUSx pins. A LIN transceiver, short for Local Interconnect Network transceiver, is an interface IC that connects a microcontroller or body-control module to a LIN bus. LIN is a low-cost, single-wire automotive network derived from the CAN concept but optimized for slower communication, lower wiring complexity, and cost-sensitive vehicle subsystems. In the component hierarchy, the TLE7268SKXUMA1 is a LIN transceiver, then an automotive interface IC, then an interface semiconductor. Key features include two independently usable LIN channels, operation to 20 kbps, compatibility with 3.3 V and 5 V digital logic, low Sleep-mode consumption, and wake-up capability. Compliance with ISO 17987-4, LIN Specification 2.2 A, and SAE J2602 supports integration into modern automotive communication systems. Very low BUSx leakage helps prevent unwanted bus loading and supports predictable behavior when connected LIN nodes enter low-power states. The device provides the physical-layer interface between the host controller and each LIN bus. Its digital transmit and receive pins connect to a microcontroller, while BUS1 and BUS2 connect to the LIN network. The independent-channel architecture allows one transceiver package to serve two LIN networks, reducing component count and PCB area compared with two separate single-channel LIN transceivers. External implementation details, including bus termination, wake-up wiring, and logic pull-ups, must follow the manufacturer datasheet. Typical uses include body-control modules, automotive gateways, seat and door modules, climate-control units, sensor nodes, and other ECUs connected by LIN sub-buses. Because the TLE7268SKXUMA1 supports two channels, it is especially useful where one ECU must interface with two separate LIN networks or where a gateway bridges multiple vehicle subsystems. For PCB implementation, preserve the package-specific land pattern, place the transceiver close to the LIN connector or bus routing, and keep BUS traces away from sensitive high-speed signals. Decoupling and signal-integrity values are not specified in the supplied verified excerpts, so component selection and layout must be completed against the complete manufacturer datasheet. This page consolidates verified manufacturer and distributor information, compliance statements, pricing status, and engineering guidance for the TLE7268SKXUMA1. It also distinguishes verified dual-LIN functionality from unavailable electrical details, preventing unsupported assumptions about pinout, thermal limits, or substitute compatibility.

見積もり お問い合わせ
TLE7269G - Dual LIN Transceiver, 20 kBaud | Infineon
TLE7269G

TLE7269G - Dual LIN Transceiver, 20 kBaud | Infineon

Infineon Technologies TLE7269G is a LIN 2.1-compliant dual LIN transceiver supporting data rates from 2.4 kBaud to 20 kBaud for in-vehicle networks. The device integrates wake-up and protection functions and is optimized for low electromagnetic interference and a sleep-mode current below 10 mA. It is supplied in a 14-pin PG-DSO package, also identified as PG-DSO-14-24 in distributor listings. A LIN transceiver, also called a LIN bus interface, belongs to the vehicle-network interface IC hierarchy and connects a microcontroller or cluster ECU to a low-speed serial network. It converts logic-level transmit and receive signals into physical LIN bus signals, while recovering incoming data for the host controller. The TLE7269G combines two LIN channels in one package, reducing board area where multiple vehicle subnets or redundant communication links are required. Key features include dual-channel operation, LIN 2.1 compliance, integrated wake-up capability, protection features, low EMI, and a sleep-mode current below 10 mA. Its data-rate range of 2.4 kBaud to 20 kBaud matches the operating range cited in the manufacturer datasheet. The very low leakage current on the bus pins also supports partially supplied LIN networks, helping nodes that remain unpowered avoid loading the active network. The TLE7269G is based on Infineon Smart Power Technology SPT, according to the manufacturer datasheet. This process combines digital control functions with automotive-grade power and interface robustness. The manufacturer specifically highlights excellent ESD robustness and high electromagnetic immunity, both important in vehicle electrical environments where cable-borne transients and radio-frequency coupling can disrupt low-speed communication. Typical uses include body-control modules, door and seat controllers, climate-control panels, lighting controllers, seat and door modules, and other ECUs connected through LIN subnets. The dual-channel configuration is particularly useful when an ECU needs two independent LIN endpoints or participates in more than one vehicle network segment. When designing around the TLE7269G, preserve the recommended external resistor, capacitor, and bus-termination arrangements from the manufacturer datasheet. Keep the LIN bus route away from sensitive analog signals and provide the required pull-up and wake-up components to avoid excessive bus loading. The low sleep current and bus leakage support low-power designs, but functional sleep and wake behavior must still be verified against the complete network topology. This page combines verified manufacturer and distributor facts with a focused comparison of the most relevant substitute candidates, application guidance, and practical interface-design notes. It distinguishes published characteristics from parameters that still require direct confirmation for a specific ordering code or design revision.

見積もり お問い合わせ
TLE7269GXUMA1 - 20 kBaud Dual LIN Transceiver | Infineon
TLE7269GXUMA1

TLE7269GXUMA1 - 20 kBaud Dual LIN Transceiver | Infineon

The Infineon TLE7269GXUMA1 is a dual-channel Local Interconnect Network transceiver that supports LIN communication at up to 20 kBaud and is supplied in a 14-pin PG-DSO-24 automotive package. It combines two stand-alone LIN transceivers in one device, reducing the component count for multi-LIN automotive electronic control units. The device supports LIN 1.3, LIN 2.0, and LIN 2.1 operation and is compliant with SAE J2602. A LIN transceiver is an automotive interface IC that converts logic-level controller signals into the physical LIN bus waveform and receives bus data for recovery by a microcontroller or LIN-capable communication controller. LIN belongs to the vehicle network hierarchy rather than high-speed Ethernet or CAN networks. It provides a cost-effective single-wire bus for distributed body, comfort, seat, door, lighting, and sensor modules. The TLE7269GXUMA1 provides two independent stand-alone LIN transceivers with a maximum transmission rate of 20 kBaud. Its LIN 2.0 and LIN 2.1 compliance, together with SAE J2602 compliance, makes it appropriate for modern vehicle electrical systems. The device is pin compatible with single LIN transceivers such as the TLE7259-2GE and TLE7259-GU, allowing integration of two LIN channels while preserving familiar transceiver connections. Electrical robustness is a major design consideration for vehicle wiring harnesses. The TLE7269GXUMA1 provides very high ESD robustness rated at 8 kV according to IEC 61000-4-2. This protection helps improve tolerance of direct and indirect ESD events encountered during vehicle assembly, servicing, and operation. The device is also optimized for low electromagnetic emission and high immunity against electromagnetic interference, supporting stable operation in electrically noisy automotive environments. Typical uses include body-control modules, door and seat controllers, climate-control electronics, lighting controllers, gateway modules, and other ECUs that require two LIN ports. Each transceiver can interface a local microcontroller with a physical LIN network bus, while low electromagnetic emission helps reduce interference with nearby sensitive electronics. Designers should verify transceiver enable, sleep, wake-up, supply-voltage, and bus-line details against the manufacturer datasheet before layout. The automotive 14-terminal DSO package also requires adequate board area, pin-1 orientation, and production-quality assembly controls. Access to the detailed pin table was not present in the supplied source excerpts, so pin-level assignment should not be inferred from the package drawing alone. This product page consolidates verified LIN capabilities, package information, ESD rating, compliance claims, distributor availability, and design considerations. It also distinguishes confirmed drop-in alternatives from unverified substitutes so engineers can make evidence-based sourcing and design decisions without relying on assumptions.

見積もり お問い合わせ
TLE7269GXUMA3 - Dual 20 kbaud LIN Transceiver | Infineon
TLE7269GXUMA3

TLE7269GXUMA3 - Dual 20 kbaud LIN Transceiver | Infineon

Infineon Technologies TLE7269GXUMA3 is an automotive twin LIN transceiver IC with two independent LIN bus channels, a maximum transmission rate of 20 kbaud, and a 14-terminal PG-DSO-14-62 surface-mount package. According to the verified manufacturer-related search data, the device is compliant with LIN specifications 1.3, 2.0, and 2.1 as well as SAE J2602. It is pin compatible with single-channel LIN transceivers such as TLE7259-2GE and TLE7259-2GU, which supports board-level standardization when channel count and application requirements permit. A LIN transceiver is an interface integrated circuit that connects a microcontroller or other host to a low-speed serial network. LIN, meaning Local Interconnect Network, is a lower-cost vehicle-network architecture typically used for sensors, actuators, door modules, climate controls, and other distributed body-electronics functions. The broader hierarchy is LIN transceiver → automotive serial interface → interface IC → integrated circuit, with the transceiver handling physical-layer communication rather than application protocols or host processing. The TLE7269GXUMA3 provides two stand-alone LIN channels, allowing one device to connect two LIN networks or two physical segments. Its supported data rate of up to 20 kbaud aligns with conventional LIN communication rates. The verified data also identifies 8 kV ESD robustness according to IEC 61000-4-2, optimized electromagnetic emission, and high immunity against interference. These characteristics are particularly relevant in automotive environments where cable routing, nearby powertrain systems, and external body connectors can expose the network to electrostatic discharge and electromagnetic coupling. The part is described as an AEC-Q100 automotive LIN transceiver in a PG-DSO-14-62 package. The available distributor records identify a two-channel, full LIN-bus transceiver configuration with gull-wing leads and automotive temperature grade. The verified sources do not provide the complete electrical limit table, so details such as supply voltage, receiver thresholds, TXD logic levels, sleep-current consumption, and exact thermal limits must be confirmed in the manufacturer datasheet before schematic release or production qualification. Typical uses include automotive body-domain modules, door and seat controllers, climate-control gateways, sensor nodes, ambient-lighting controllers, and LIN-to-CAN or LIN-to-MCU interface boards. The twin-channel arrangement can reduce component count when two independent LIN segments are required, although channel-specific enable, sleep, wake-up, and fault-management behavior must be verified in the full datasheet. PCB design should preserve the LIN transceiver's automotive ESD and EMC performance. Keep the LIN bus and ground-return paths appropriately coupled, minimize loop area, follow the manufacturer's application-circuit layout, and provide verified supply and input-decoupling networks. Do not infer external protection-component values or bus termination details from search snippets; use the complete manufacturer datasheet and reference application guidance. This page consolidates verified distributor listings, LIN standards support, automotive qualification information, package details, and practical sourcing guidance. It also distinguishes confirmed facts from unavailable specifications and avoids presenting unverified substitute parts as drop-in replacements.

見積もり お問い合わせ
TLE7729TXUMA1 - 4-Channel Airbag Receiver | Infineon
TLE7729TXUMA1

TLE7729TXUMA1 - 4-Channel Airbag Receiver | Infineon

The Infineon Technologies TLE7729TXUMA1 is a four-channel airbag satellite receiver IC using the company’s SatRIC serial interface architecture. It is designed for automotive occupant-protection systems in which remote satellite sensors report acceleration and crash-relevant measurements to a central airbag control module. The device is offered in a 28-pin PG-TSSOP surface-mount package and is supplied in tape-and-reel packaging. An interface IC is an integrated circuit that connects sensors, controllers, and other system blocks using standardized electrical signaling. Within the automotive electronics hierarchy, the TLE7729TXUMA1 belongs to the specialized interface IC category rather than a general-purpose communications transceiver. Its defining role is to receive information from multiple remote sensing nodes and forward it to the vehicle safety controller over a serial interface, reducing the number of separate wiring connections required by a distributed restraint system. According to the available TLE7729 documentation, the principal identified functions are four-channel satellite reception, SatRIC operation, and a serial interface for automotive airbag systems. The automotive qualification designation and specialized SatRIC architecture make the IC suitable only where the surrounding sensing, bus, and restraint-control architecture is compatible with Infineon’s system. It should not be treated as a general-purpose UART, SPI, or CAN transceiver because the verified sources describe a dedicated satellite-receiver application. The verified component information identifies the package as PG-TSSOP-28, also described by distributors as a 28-pin TSSOP. Tape-and-reel ordering is indicated by the TXUMA1 ordering code and by distributor listings that identify the part as 28TSSOP T/R. Because the retrieved sources do not expose individual terminal names or a complete pin-assignment table, the package diagram is identified separately from the electrical pin map. Typical uses include distributed airbag satellite sensors, remote acceleration-sensing modules in vehicle restraint systems, and central airbag control units that collect crash data from several remote sensor locations. The four-channel architecture supports multi-axis sensing systems by consolidating several satellite signals behind a dedicated serial receiver. The critical design constraint is system-level interoperability. A PCB redesign should preserve the Infineon-defined SatRIC physical interface, power distribution, reference connections, and communication timing because no verified evidence in the supplied data confirms that an unrelated generic interface IC is pin-to-pin compatible. Vehicle-level EMC behavior, diagnostic coverage, and air-quality or functional-safety conclusions should be validated against the complete manufacturer datasheet and the deployment platform rather than inferred from distributor summaries.

見積もり お問い合わせ
TLE8250G - 1 Mbit/s CAN Transceiver | Infineon | Automotive
TLE8250G

TLE8250G - 1 Mbit/s CAN Transceiver | Infineon | Automotive

The Infineon TLE8250G is a high-speed CAN transceiver with one transmitter and one receiver, data rates up to 1 Mbit/s, and ISO 11898-2 compliance in an eight-pin PG-DSO-8 surface-mount package. It serves as the physical-layer interface between a CAN protocol controller and a two-wire differential CAN bus. According to the Infineon product page and manufacturer datasheet, the device is designed for automotive and industrial networks, with low electromagnetic emissions and emissions-related interference, high electromagnetic immunity, and robust ESD protection. A CAN transceiver is a network interface IC within the broader communications-semiconductor hierarchy. It converts logic-level TXD and RXD signals into the differential CANH and CANL bus signals, then converts received bus levels back into a controller-compatible RXD signal. High-speed CAN is a two-wire differential network designed for robust, priority-based communication between electronic control units, where common-mode rejection and disturbance tolerance are central to reliable operation. The TLE8250G combines a 1 Mbit/s-capable CAN driver with a receiver interface and bus protection functions. Its symmetric CANH and CANL behavior supports low EMI in applications where electronic modules must coexist on a shared harness. The device supports partially supplied networks, an important characteristic for automotive systems where some nodes can be unpowered while others remain active. In power-down mode, receiver input resistors are switched off so the transceiver input becomes highly resistive, reducing unwanted loading of an inactive bus. Infineon Smart Power Technology combines bipolar and CMOS control circuitry with DMOS power devices on one monolithic circuit. The manufacturer describes this technology as supporting high ESD robustness and high electromagnetic immunity. The TLE8250G and its Smart Power Technology are stated to be AEC qualified. The transceiver also meets or exceeds ISO 11898-2 requirements and is offered in a RoHS-compliant PG-DSO-8 package, making it appropriate for electronic control units, body modules, gateways, sensors, and industrial automation interfaces. Use the TLE8250G when the PCB already expects an eight-pin PG-DSO-8 CAN interface and the bus operates at or below 1 Mbit/s. Designers should confirm the transceiver I/O voltage against their controller, preserve the CAN bus termination network, and follow the manufacturer’s layout guidance to minimize radiated emissions. Because only verified electrical limits, supply ranges, temperature ranges, and pin-level details are not included in the supplied search data, those values require confirmation in the manufacturer datasheet before release to production. The TLE8250G is also fully pin- and function-compatible with its Infineon predecessor, the TLE6250G, according to the verified manufacturer documentation. This predecessor relationship provides a documented upgrade path, but design reviews should still compare operating voltages, timing, transient immunity, and lifecycle requirements for the exact production variant. This page synthesizes manufacturer specifications, compatibility information, application guidance, and sourcing references that are not presented together on a distributor search page.

見積もり お問い合わせ
TLE8250GXUMA1 - 1Mbit CAN Transceiver | Infineon | Automotive
TLE8250GXUMA1

TLE8250GXUMA1 - 1Mbit CAN Transceiver | Infineon | Automotive

The Infineon TLE8250GXUMA1 is a single 5 V high-speed CAN transceiver with one transmitter and one receiver, designed for automotive and industrial CAN networks. It supports a maximum data rate of 1 Mbaud, operates from a 4.5 V to 5.5 V supply, and is specified for an operating temperature range of -40 °C to +150 °C. The device is packaged in an 8-pin SOIC-8 package. A CAN transceiver is a physical-layer interface between a CAN protocol controller and the differential CAN bus. The TLE8250GXUMA1 converts logic-level TXD and RXD signals into the bus differential and converts received bus levels back into a controller-compatible signal. This device also provides disturbance protection for the microcontroller against electrical transients and ESD events encountered on the connected network. The TLE8250GXUMA1 is identified as an ISO 11898-2-compliant, low-EME/EMI, high-speed CAN transceiver. Its half-duplex 1/1 driver-receiver arrangement is intended for systems that use one CAN physical interface, including automotive body electronics, industrial automation equipment, embedded control modules and CAN-connected sensors. The 4.5 V to 5.5 V operating supply supports regulated 5 V digital systems. The -40 °C to +150 °C operating range makes the device suitable for demanding industrial environments, while the automotive-oriented transient protection and ESD features support robust communication links. Typical implementation places the transceiver between a CAN controller and the CANH/CANL bus pair. The TXD input is driven by the controller, RXD is read by the controller, and the transceiver handles the physical bus signaling and protection function. PCB layout should provide a solid ground reference, short differential routing, appropriate bus termination, and separation from sensitive analog or high-speed digital circuits. The available verified information identifies the package as SOIC-8 and confirms the 1 Mbaud rate, 4.5 V to 5.5 V supply range and -40 °C to +150 °C temperature range. This page combines those verified attributes with practical selection guidance, comparison information and design notes for engineers evaluating CAN physical-layer implementations.

見積もり お問い合わせ
TLE8250GXUMA5 - 1 Mbaud CAN Transceiver | Infineon
TLE8250GXUMA5

TLE8250GXUMA5 - 1 Mbaud CAN Transceiver | Infineon

Infineon Technologies TLE8250GXUMA5 is a single-channel, half-duplex high-speed CAN transceiver with a 1 Mbaud data rate, 4.5 V to 5.5 V supply range, and an 8-SOIC surface-mount package. The device combines a CAN transmitter, CAN receiver, and bus-interface circuitry in one PG-DSO-8-16 package, making it suitable for automotive and industrial Controller Area Network nodes. A CAN transceiver is an interface IC that converts between a host controller's digital logic signals and the differential CANH and CANL bus wires. The CAN bus belongs to the broader vehicle and industrial network hierarchy, while the TLE8250GXUMA5 occupies the physical-layer transceiver level between a CAN controller and external bus wiring. Its ISO 11898-2 compliance supports interoperability in standardized CAN systems. Verified characteristics include one transmitter and one receiver, half-duplex operation, 1 Mbaud data rate, a 4.5 V to 5.5 V supply range, and receiver hysteresis of 200 mV. The specified operating-temperature range extends from -40 °C to 150 °C, which supports demanding automotive environments where ordinary commercial interface components may lack sufficient temperature margin. The 1 Mbaud capability makes the transceiver suitable for body, comfort, powertrain-adjacent, and industrial automation networks operating below the maximum data rate of faster CAN FD links. Its 5 V supply operation also allows integration with 5 V CAN controllers and processors that provide 3.3 V UART or SPI control signals through suitable logic-level compatibility. Typical uses include automotive electronic control units, body-control modules, sensor gateways, industrial controllers, robotic systems, and CAN-based sensors. In each application, the transceiver handles the physical bus layer while a separate CAN controller handles frame construction, arbitration, acknowledgments, filtering, and fault management. This division of responsibility supports cleaner firmware and easier protocol debugging. PCB implementation should account for the 8-SOIC footprint, exposed-pad-free mechanical layout, supply decoupling, and controlled routing of the differential bus. The CANH and CANL traces should be kept as a compact differential pair, while the ground reference should remain close to the transceiver. Designers must also review the manufacturer datasheet for termination, bus-fault, and unused-pin requirements before releasing a production layout. This product record combines verified distributor availability, a manufacturer-family cross-reference, package and interface characteristics, and practical selection guidance. It also distinguishes verified facts from unprovided parameters so procurement and engineering teams can identify missing electrical or qualification data before design approval.

見積もり お問い合わせ
TLE8250SJXUMA1 - 2 Mbps CAN Transceiver | Infineon
TLE8250SJXUMA1

TLE8250SJXUMA1 - 2 Mbps CAN Transceiver | Infineon

Infineon TLE8250SJXUMA1 is a 1/1 high-speed CAN transceiver with a maximum data rate of 2 Mbps, a 4.5 V to 5.5 V supply range, and a PG-DSO-8-16 surface-mount package. Designed for HS CAN networks, the device interfaces a CAN protocol controller with the physical CAN bus while protecting the controller against interference generated within the network. It is supplied in an 8-pin SOIC-compatible package. A CAN transceiver is a physical-layer interface within the CAN communication hierarchy. It converts logic-level TXD and RXD signals into differential bus-level signals and converts received bus signals back into logic levels for the CAN controller. The TLE8250SJ family is intended for automotive and industrial CAN networks operating at high data rates without a wake-up function. The verified operating specification identifies one transmitter and one receiver, a 2 Mbps maximum data rate, and a supply voltage of 4.5 V to 5.5 V. Its operating temperature range extends from -40 °C to 150 °C, supporting temperature demanding vehicle-network and industrial environments. The package is a PG-DSO-8-16 in an 8-SOIC, 3.90 mm-wide surface-mount format. The interface between the controller and physical bus is central to the device architecture. According to the manufacturer datasheet, the TLE8250SJ is a high-speed CAN transceiver without a wake-up function. It supports established physical-layer behavior for CAN networks and is intended to shield the connected microcontroller from interference occurring within the network. The 1/1 transceiver configuration means that each device provides one CAN transmit channel and one CAN receive channel. Typical uses include automotive body and comfort networks, industrial automation systems, embedded motor-control equipment, and other distributed control networks. A CAN controller can connect to the transceiver through TXD and RXD, while the transceiver connects to the CANH and CANL bus conductors. The 2 Mbps capability is particularly relevant to communication links where a faster bus update rate reduces message latency. Designers should provide a stable 5 V supply within the verified 4.5 V to 5.5 V range and validate the complete bus network rather than relying on the transceiver rating alone. Bus termination, common-mode behavior, electromagnetic compatibility, wiring length, and controller timing must all be checked for the target vehicle or industrial installation. Exact pin names, loop timing, bus fault limits, and package dimensions require confirmation from the manufacturer datasheet. This page consolidates the verified manufacturer and distributor information for TLE8250SJXUMA1, including operating limits, environmental ratings, package data, and procurement links. It also distinguishes confirmed drop-in alternatives from unverified substitutions, helping engineers make evidence-based component decisions without assuming that every 8-pin CAN transceiver is electrically or pin compatible.

見積もり お問い合わせ
TLE8250VSJXUMA1 - 2Mbps CAN Transceiver | Infineon
TLE8250VSJXUMA1

TLE8250VSJXUMA1 - 2Mbps CAN Transceiver | Infineon

Infineon Technologies TLE8250VSJXUMA1 is a high-speed CAN bus transceiver designed for 5 V vehicle-network interfaces. It supports a maximum data rate of 2 Mbps, operates from a 4.5 V to 5.5 V supply, and is offered in an 8-pin PG-DSO-8-16 surface-mount package. The device also specifies an operating temperature range of -40°C to +150°C, making it intended for demanding automotive and industrial communication environments. A CAN transceiver is an interface IC that converts logic-level signals between a host controller and a differential CAN bus. In the complete communication hierarchy, this component belongs to the CAN physical-layer transceiver class, where it interfaces a CAN controller or microcontroller with the CAN_H and CAN_L bus conductors. Its role is to provide bus-compatible signal levels while supporting reliable communication across a multi-node network. The principal operating characteristics include the 4.5 V to 5.5 V supply range, 2 Mbps maximum CAN data rate, and -40°C to +150°C operating-temperature range. The PG-DSO-8-16 package supports compact surface-mount PCB construction, while the extended temperature rating supports use in automotive electronics, industrial controllers, vehicle networking equipment, and embedded CAN systems. The Infineon ordering designation identifies this unit as the TLE8250VSJXUMA1 configuration in an 8-pin package. Its CANbus protocol designation and high-speed data capability distinguish it from low-speed fault-tolerant transceivers and from controller-only CAN devices. When designing around this component, the system supply must remain within 4.5 V to 5.5 V, and the PCB must implement the device-specific termination, bus-interface, ground, and decoupling connections shown in the Infineon datasheet. Typical uses include automotive body and comfort electronics, industrial CAN gateways, vehicle diagnostic interfaces, distributed automation nodes, and embedded control systems. A microcontroller with an integrated CAN controller can communicate through the transceiver, while the differential bus provides noise-resistant signaling over cables between distributed modules. The 2 Mbps rate is suitable for high-throughput control and diagnostic traffic. Layout quality is critical in CAN networks. Place the device and its decoupling capacitor close to their associated supply pins, keep the CAN_H and CAN_L routing symmetrical, provide a continuous ground reference, and follow the recommended common-mode choke or split termination approach for the target network. Bus protection should be selected according to the vehicle or industrial environment rather than inferred solely from transceiver specifications. This product record combines the manufacturer's identified CANbus function, 2 Mbps data rate, 4.5 V to 5.5 V supply range, extended temperature range, package information, and RoHS marking with practical guidance for PCB implementation, network integration, sourcing, and drop-in replacement assessment.

見積もり お問い合わせ
TLE8250XSJXUMA1 - Compact 8-Pin Half CAN Bus | Infineon
TLE8250XSJXUMA1

TLE8250XSJXUMA1 - Compact 8-Pin Half CAN Bus | Infineon

The Infineon Technologies TLE8250XSJXUMA1 is a compact 8-pin CAN transceiver designed for vehicle-network electronic systems. It is classified as a 1/1 Half CANbus interface device in the PG-DSO-8-16 package, combining the CAN transceiver's physical-layer interface functions with a space-saving footprint for distributed automotive and industrial control networks. The device includes a CAN bus interface, transmitter, receiver, and related physical-layer connections required to link a host controller to a two-wire CAN network. A CAN transceiver is an interface IC that belongs to the physical layer of a Controller Area Network. It converts logic-level signals from a CAN controller into physical bus signals and reconstructs received bus signals at the controller interface. CAN technology belongs to the broader hierarchy of serial-interface ICs, interface controllers, and vehicle-network semiconductors. This physical-layer role is distinct from the CAN protocol controller, which handles frames, arbitration, acknowledgments, and error management. The TLE8250XSJXUMA1 emphasizes compact implementation through its 8-pin PG-DSO-8-16 package. This makes it relevant to space-constrained electronic control units where connector placement and PCB area require careful consideration. Manufacturer documentation identifies the device as a half CANbus transceiver, while the product listing classifies it as a 1/1 transceiver. The exact electrical ratings, loopback or standby behavior, bus-interface timing, and protection characteristics must be confirmed against the manufacturer datasheet before final circuit approval. In a typical CAN node, the transceiver sits between a CAN controller and the bus connector. The controller's transmit and receive signals connect to the transceiver logic pins, while the bus-side pins connect to the CAN_H and CAN_L conductors. Automotive designs also require attention to electromagnetic compatibility, ground bounce, bus termination, common-mode behavior, and fault tolerance. Since these characteristics are not quantified in the available product summaries, the circuit should be validated against the complete manufacturer datasheet and application guidance for the selected bus topology. Typical uses include distributed powertrain and chassis control modules, body electronics, gateway units, electric-vehicle control systems, industrial automation controllers, and other CAN-based embedded platforms. A microcontroller or dedicated CAN controller performs frame processing, while TLE8250XSJXUMA1 handles the physical connection to the bus. Common companion devices include CAN transceivers for other nodes, isolated CAN interfaces, microcontrollers with integrated CAN controllers, and protection components selected according to the vehicle or industrial harness requirements. PCB implementation requires close attention to the CAN bus pins, supply decoupling, grounding, and the separation of sensitive logic signals from the bus-side connection. Place the device to minimize the loop area of bus traces and provide the bus network with the termination and protection required by the system architecture. Validate common-mode range, fault behavior, radiated emissions, and ESD immunity at system level rather than treating package compatibility as proof of electrical equivalence. This product page consolidates the verified package and interface classification, related family references, application guidance, PCB considerations, and a clearly bounded drop-in comparison. It is designed to help engineers identify the correct CAN interface role, plan the supporting controller and protection circuitry, and identify any replacement candidates that still require full pin and electrical verification.

見積もり お問い合わせ
TLE8251VSJXUMA1 - 2Mbps CAN Transceiver | Infineon
TLE8251VSJXUMA1

TLE8251VSJXUMA1 - 2Mbps CAN Transceiver | Infineon

Infineon TLE8251VSJXUMA1 is a high-speed CAN transceiver designed for automotive and industrial HS CAN networks, with operation up to 2 Mbps in an 8-pin PG-DSO-8 package. The device provides one CAN transmit and one CAN receive channel and supports bus wake-up, allowing a connected controller to detect activity on a sleeping CAN network. Its specified automotive operating temperature extends to 150 °C. A CAN transceiver is a physical-layer interface within a controller-area network. It converts logic-level TXD and RXD signals into the differential CAN bus levels used by connected nodes and receives those bus levels back as a logic signal for the CAN protocol controller. In the OSI hierarchy, the TLE8251VSJXUMA1 occupies the physical layer, while the CAN controller handles frames, arbitration, error management, and higher-layer communication. The headline capabilities are a maximum CAN data rate of 2 Mbps, a single-channel transceiver arrangement, integrated bus wake-up support, and an 8-pin PG-DSO-8 surface-mount package. These features suit compact automotive electronic control units, industrial automation equipment, and distributed control systems that require a dependable connection between a CAN controller and a twisted-pair network. The automotive-grade temperature capability supports use in demanding vehicle electronics environments. The transceiver isolates the CAN controller's digital interface from the physical bus while adding the electrical behavior needed for robust communication. Bus wake-up reduces the need for the host controller to remain fully active when communication is intermittent. Its 2 Mbps capability also provides useful bandwidth compared with slower CAN nodes, while remaining compatible with the HS CAN network architecture described in the manufacturer documentation. Typical applications include body-control modules, powertrain-related controllers, sensor gateways, industrial motor controllers, factory automation nodes, and industrial Ethernet-to-CAN gateways. The device is especially relevant when a controller exposes a CAN host interface and the PCB has a PG-DSO-8 land pattern compatible with the device's pin configuration. For layout, place the transceiver close to the CAN connector and maintain a short, direct CANH and CANL path. Keep the bus-side return path continuous, provide the interface and biasing components recommended by the manufacturer, and verify that the controller voltage levels match the transceiver's digital interface. This page consolidates the operating speed, bus-wake-up function, automotive temperature capability, package details, sourcing guidance, and practical integration considerations into one engineering-focused reference for evaluating TLE8251VSJXUMA1.

見積もり お問い合わせ
TLE8457ALEXUMA1 - LIN Transceiver with 5V LDO | Infineon
TLE8457ALEXUMA1

TLE8457ALEXUMA1 - LIN Transceiver with 5V LDO | Infineon

The Infineon TLE8457ALEXUMA1 is an automotive LIN-bus transceiver with an integrated 5 V regulator, operating at 20 kBd in an 8-pin PG-TSON-8-1 package. It combines a LIN physical-layer transceiver with a 5.5 V to 28 V vehicle-side operating range and AEC-Q100 qualification for automotive electronics. A LIN transceiver is a physical-layer interface IC that connects a low-cost microcontroller to a LIN bus used in distributed vehicle networks. LIN, short for Local Interconnect Network, provides a single-wire, master-slave communication architecture for body-control modules, door controls, seat modules, lighting controls, climate-control components, and other distributed automotive electronics. The TLE8457ALEXUMA1 places the bus transceiver and regulator in one compact surface-mount device, reducing the component count required at a LIN node. The principal operating specifications are a 20 kbit/s LIN data rate, a 5.5 V to 28 V supply range, and a 5 V regulated output rated for 70 mA. The device operates from -40°C to +150°C, making it suitable for demanding automotive environments. Its integrated 5 V regulator can power a LIN-compatible microcontroller or local logic, while the bus interface handles LIN signal transmission and reception between the ECU and network. The TLE8457ALEXUMA1 is identified as a half-duplex LIN transceiver. LIN bus communication is inherently half duplex because the same wire carries serialized data in either direction under master-slave control. The integrated regulator and transceiver provide a compact node-level solution, but the application still requires correct bus termination, reference-ground wiring, decoupling, protection against automotive transients, and firmware that implements the applicable LIN protocol. Typical uses include LIN-to-CAN gateway hardware, automotive climate-control controllers, body-control modules, ambient-light sensors, seat and door controls, switch-bank modules, and small electric actuators. The 70 mA regulator output is suitable for low-power local circuitry but should not be treated as a general-purpose high-current supply. Validate the complete power budget of the attached ECU before assigning additional load to the 5 V output. For PCB implementation, place the device close to the LIN connector or bus header, follow the pin-description and recommended-layout sections of the Infineon datasheet, and provide local supply decoupling. The exposed-pad package also requires attention to copper area and thermal flow, particularly when ambient temperature and nearby power components are elevated. This product page combines the manufacturer interface information, automotive qualification details, package characteristics, application guidance, and drop-in replacement analysis to support faster engineering selection and PCB planning.

見積もり お問い合わせ
TLE8457ALEXUMA2 - Automotive LIN Transceiver | Infineon
TLE8457ALEXUMA2

TLE8457ALEXUMA2 - Automotive LIN Transceiver | Infineon

Infineon Technologies TLE8457ALEXUMA2 is a 1/1 LIN transceiver designed for bidirectional vehicle-network communication, with operation across 3 V to 28 V and 5.5 V to 40 V supply-voltage ranges. The device is packaged in an 8-pin PG-TSON-8-1 surface-mount package and supports operation from -40 °C to 150 °C. According to the Infineon TLE8457A/TLE8457B datasheet, bus communication complies with LIN specification 2.2A and SAE J2602. A LIN transceiver, also called a Local Interconnect Network transceiver, connects a microcontroller or other logic device to a single-wire vehicle bus. In the broader electronics hierarchy, it belongs to the LIN physical-layer interface IC category, within interface ICs and automotive communication semiconductors. It converts logic-level signals into physical LIN bus signals and receives bus states for the host controller. The TLE8457ALEXUMA2 uses a 1/1 driver-receiver configuration. Its integrated supply capability can provide a microcontroller and associated peripherals with up to 70 mA, reducing the number of external power components needed in a LIN node. The device also includes undervoltage-reset protection through its VCC supply function, supporting controlled microcontroller operation when the logic supply is outside its valid operating range. Bus compatibility is a central design consideration for automotive electronics. The Infineon TLE8457A/TLE8457B datasheet identifies compliance with LIN specification 2.2A and SAE J2602, allowing the interface to be used in systems designed around established vehicle-network requirements. Bidirectional communication enables the transceiver to both transmit controller commands and report bus states back to the host. Typical uses include LIN-controlled vehicle body electronics, door and seat modules, climate-control peripherals, lighting controllers, sensor interfaces, and gateway nodes. The 150 °C upper operating-temperature limit supports applications exposed to elevated temperatures inside automotive enclosures, while the PG-TSON-8-1 package supports compact surface-mount PCB construction. Design the LIN bus connection around the manufacturer’s recommended transceiver, pull-up, load-capacitance, and protection arrangements. Confirm that the logic supply, bus supply, ground reference, and microcontroller interface levels meet the device limits. Treat the 70 mA auxiliary output as a budget for the attached MCU and peripherals rather than as additional LIN-bus current capacity. This page consolidates the manufacturer’s electrical limits, package information, interface standards, application guidance, and sourcing workflow. It also distinguishes verified drop-in replacements from merely similar automotive interface products, helping engineers select a part that preserves both PCB footprint and communication requirements.

見積もり お問い合わせ
TLE8457ASJXUMA1 - 5V 20kBd LIN Transceiver | Infineon
TLE8457ASJXUMA1

TLE8457ASJXUMA1 - 5V 20kBd LIN Transceiver | Infineon

Infineon Technologies TLE8457ASJXUMA1 is a monolithic LIN transceiver with an integrated low-dropout 5 V voltage regulator, designed for automotive communication and low-power embedded systems. The device supports LIN data rates up to 20 kBd and can supply a microcontroller and associated peripherals with up to 70 mA from its regulated output. It is offered in an 8-pin DSO package identified as TSON-8 by Infineon. A LIN transceiver, also called a Local Interconnect Network transceiver, connects a microcontroller or programmable logic controller to a LIN bus. It converts serial bus-level signals into digital receive and transmit signals for the host controller. This TLE8457ASJXUMA1 combines that interface function with a local regulator, reducing the number of components needed for a compact LIN node while preserving a stable 5 V supply for digital circuitry. The principal features include a regulated 5 V output, an output capability of up to 70 mA, LIN operation at up to 20 kBd, and a low-dropout regulator integrated into the same monolithic device. The half-LIN-bus transceiver designation identifies the device as a one-channel communications solution. These characteristics make it suitable for distributed automotive subsystems where a controller must exchange low-speed serial data with remote modules over a cost-effective single-wire network. Typical uses include automotive body-control modules, door and seat electronics, climate-control panels, sensor nodes, and LIN-connected switches. In these systems, the microcontroller can use the transceiver's receive and transmit interface to exchange commands and diagnostic information with remote LIN slaves. The integrated regulator can support nearby low-power peripherals when the board-level power budget remains within the device's 70 mA capability. Design the PCB with a clear return path for the LIN bus, robust input filtering, and protection appropriate to the vehicle electrical environment. Place the regulator output capacitor and transceiver interface components close to their associated pins to limit trace inductance and high-frequency disturbance. Verify the LIN waveform, bus rise time, termination, and system sleep behavior against the device requirements and the LIN standard used by the vehicle platform. This product page combines the manufacturer's device description with package, interface, application, and replacement guidance. It also highlights the distinction between the DSO-8 distributor package name and the TSON-8 manufacturer package name, helping engineers cross-check footprints before committing a PCB design to this integrated LIN transceiver and 5 V regulator.

見積もり お問い合わせ
TLE8457BLEXUMA1 - 3.3V 70mA LIN Transceiver | Infineon
TLE8457BLEXUMA1

TLE8457BLEXUMA1 - 3.3V 70mA LIN Transceiver | Infineon

The Infineon Technologies TLE8457BLEXUMA1 is an automotive LIN bus transceiver with an integrated 3.3 V low-dropout voltage regulator, 70 mA regulator output capability, and LIN communication up to 20 kBit/s in the PG-TSON-8-1 package. It combines the physical-layer interface and local supply function required by compact automotive body and comfort systems. A LIN transceiver is the interface between a microcontroller and a LIN network. LIN, or Local Interconnect Network, is a low-cost single-wire serial bus used for distributed automotive and industrial control functions. Within the interface-IC hierarchy, the TLE8457BLEXUMA1 combines a LIN transceiver, a low-dropout regulator, a linear regulator, and a power-management IC in one device. The principal features include compatibility with LIN specification 2.2A and SAE J2602, bidirectional bus communication, a stable 3.3 V output for a microcontroller and peripherals, and a regulator output current of up to 70 mA. The integrated regulator uses a low-dropout architecture to reduce the voltage difference required between the battery-derived input and the regulated 3.3 V rail. Automotive EMC robustness is a core design consideration for this device. The integrated supply reduces the number of components near the LIN interface, while the TSON-8-1 package supports compact PCB placement. During standby, the device draws 20 microamperes according to the Infineon product page, helping conserve vehicle power when the associated ECU is inactive. Typical uses include LIN-controlled vehicle body modules, door and seat controllers, climate-control peripherals, sensor interfaces, and small distributed control units. The 3.3 V regulator output is suitable for low-power microcontrollers and peripheral circuits whose current demand remains within the 70 mA capability of the device. When laying out the PCB, use the manufacturer pin-description table to assign every PG-TSON-8-1 connection and follow the recommended application circuit for bus and supply decoupling. Confirm that the LIN bus voltage, supply conditions, regulator load, and automotive transient requirements of the complete module remain inside the device ratings before production release. This product overview combines the Infineon interface and regulation functions with practical comparison, sourcing, and design guidance. It is intended to help engineers identify the correct LIN transceiver, plan its 3.3 V power architecture, and assess whether a verified drop-in alternative is available for the same footprint.

見積もり お問い合わせ
TLE8457BSJXUMA1 - 20 kBd LIN Transceiver | Infineon
TLE8457BSJXUMA1

TLE8457BSJXUMA1 - 20 kBd LIN Transceiver | Infineon

The Infineon TLE8457BSJXUMA1 is an automotive LIN bus half-duplex transceiver with an integrated low-dropout 3.3 V regulator, a 70 mA regulator output, and 20 kBd LIN communication capability in an 8-pin PG-DSO-8 package. A LIN transceiver is a physical-layer interface that connects a low-speed serial network controller to a LIN bus. LIN, also called Local Interconnect Network, is used for distributed automotive and industrial control systems. The interface belongs to the transceiver and interface IC hierarchy, where it converts logic-level transmit and receive signals into bus-compatible levels while helping protect the controller from electrical stress. The TLE8457BSJ family combines bus communication with a 3.3 V supply function for a microcontroller and its peripherals. Its integrated regulator can supply up to 70 mA, reducing the number of external power components required in a LIN node. The device supports operation up to 20 kBd, while its standby current is specified at 20 µA, helping conserve power during inactive operating states. Infineon identifies the TLE8457BSJ as AEC-Q100 qualified for automotive use. This qualification makes the device relevant to vehicle body, comfort, lighting, seat, sensor, and control-module systems where communication reliability and environmental robustness are important design considerations. The integrated regulator and transceiver combine two functions in one compact surface-mount package. Typical uses include LIN-controlled automotive door modules, climate-control units, seat controllers, ambient sensors, lighting modules, and small industrial LIN nodes. The 20 kBd operating rate suits low-bandwidth serial links, while the integrated 3.3 V rail can support a suitably designed controller and limited peripheral load without a separate discrete regulator. Design the LIN bus network with the voltage thresholds, pull-up arrangement, bus capacitance, and grounding recommended in the manufacturer datasheet. Keep the transceiver and its supporting components close to the LIN connector, and review the regulator’s thermal and current budget before assigning additional peripheral current to the 3.3 V output. This product page organizes the verified LIN, regulator, package, qualification, application, and sourcing information into an engineering-focused reference. It also identifies the closest documented same-brand family member and highlights the checks that matter before substituting a LIN transceiver on an existing PCB.

見積もり お問い合わせ
TLE8457CLEXUMA1 - 5V LIN Transceiver with 70mA LDO
TLE8457CLEXUMA1

TLE8457CLEXUMA1 - 5V LIN Transceiver with 70mA LDO

Infineon Technologies TLE8457CLEXUMA1 is an automotive LIN transceiver with an integrated 5 V low-dropout regulator, 70 mA regulator output capability, and a 20 kBd LIN data rate. It is supplied in an 8-pin PG-TSON-8-1 surface-mount package with an exposed pad and is offered in a tape-and-reel ordering configuration. The integrated regulator is designed to supply a microcontroller and associated peripherals from the vehicle LIN network. A LIN transceiver is an interface integrated circuit that connects a microcontroller to a Local Interconnect Network bus. LIN is a low-cost, single-wire automotive communication network used for distributed vehicle functions such as body electronics, climate controls, lighting modules, seat controls, and door modules. A LIN transceiver combines the physical-layer driver and receiver with logic interfacing, while an integrated LDO allows the device to establish a local regulated supply for nearby control electronics. The principal characteristics of the TLE8457CLEXUMA1 are its integrated 5 V regulator, 70 mA regulator output, 20 kBd bus speed, and 20 µA standby current. Combining the LIN interface and regulator in one package reduces the number of components required beside a microcontroller. This integration can simplify PCB routing while reducing the area required for a basic LIN-connected control node. The exposed-pad TSON package also provides a defined thermal path from the device to the PCB copper area. The device is identified as an automotive-grade LIN interface solution with AEC-Q100 qualification. Its 20 kBd communication rate is appropriate for LIN networks that use the standardized low-speed automotive communication profile. The 5 V regulator output supplies the local node electronics, while the LIN interface handles communication between the node and the vehicle bus. The 70 mA output capability should be evaluated against the combined load current of the microcontroller, pull-up circuitry, sensors, and attached peripherals. Typical uses include LIN-controlled body modules, automotive switch and relay interfaces, climate-control panel endpoints, lighting controllers, seat and door electronics, and small sensor nodes. In these systems, the microcontroller handles application logic, the TLE8457CLEXUMA1 handles the physical LIN connection, and the integrated regulator powers suitable low-current circuitry. System partitioning must ensure that the regulator load remains within its specified capability and that the automotive supply network meets the device requirements shown in the manufacturer documentation. When laying out the PCB, use the exposed pad as part of the thermal and ground structure and follow the manufacturer’s land-pattern, pin-assignment, and assembly guidance. Place the decoupling capacitors close to their associated supply pins with short return paths. The LIN bus connection also needs careful review of transceiver placement, trace geometry, grounding, and protection strategy so that switching events and external wiring do not degrade communication reliability. This product page organizes the confirmed device functions, automotive interface role, package information, and engineering use cases into one reference. It also distinguishes verified drop-in replacements from functional alternatives so that PCB reuse decisions are based on package, pin, and parameter compatibility rather than only on the shared LIN interface category.

見積もり お問い合わせ
TLE8457CSJXUMA1 - 20kBd LIN Transceiver | Infineon
TLE8457CSJXUMA1

TLE8457CSJXUMA1 - 20kBd LIN Transceiver | Infineon

Infineon Technologies TLE8457CSJXUMA1 is an automotive LIN transceiver with an integrated 5 V low-dropout voltage regulator, one transmitter, one receiver, and a 20 kbit/s data rate in the PG-DSO-8 package. It supplies a microcontroller and associated peripherals with up to 70 mA while providing the physical-layer interface for LIN bus communication. A LIN transceiver, also called a LIN interface or LIN physical-layer device, connects a low-speed serial network controller to a vehicle communication bus. In the broader hierarchy, it belongs to the LIN interface transceiver class, interface IC category, and automotive semiconductor ecosystem. Integrating the voltage regulator with the bus interface reduces the number of external power components needed in compact automotive modules while preserving a stable 5 V supply for the local controller and peripherals. The TLE8457CSJ family combines a LIN transmitter, LIN receiver, and low-dropout regulator in one integrated circuit. Its 20 kbit/s LIN data rate suits body electronics and comfort systems, while the 70 mA regulator output is intended for local microcontroller support rather than high-current loads. A low standby current of 20 µA is specified for the device family, helping reduce quiescent consumption when an automotive module enters a low-power state. The PG-DSO-8 package is designed for surface-mount assembly and is associated with an automotive qualification grade of AEC-Q100. The device is identified with a one-transmitter, one-receiver configuration, and its RoHS 3 compliant and REACH unaffected declarations support use in modern automotive electronics supply chains. Moisture sensitivity is listed as MSL 3 for 168 hours, making controlled handling and reflow-profile management important during manufacturing. Typical uses include LIN-controlled door modules, seat and climate-control electronics, body-control interfaces, sensor nodes, and compact automotive peripheral units. In each case, the transceiver handles the physical bus levels while the integrated 5 V regulator powers the local processing circuitry. Designers should also check the LIN bus topology, termination, transceiver enable behavior, wake-up requirements, and available regulator current before assigning a supply load to the internal LDO. For a new PCB, follow the manufacturer pin-description table for signal assignment and place the input, output, and bus-decoupling components close to their associated pins. Keep the LIN bus routing away from sensitive analog and high-speed digital paths, and confirm that the chosen connector, ESD strategy, and grounding arrangement preserve the integrity of the physical layer. This page consolidates the verified electrical ratings, package information, automotive compliance details, procurement workflow, and engineering guidance needed to evaluate the TLE8457CSJXUMA1 for a LIN-connected automotive module.

見積もり お問い合わせ
TLE8457DLEXUMA1 - 3.3V LIN Transceiver | Infineon
TLE8457DLEXUMA1

TLE8457DLEXUMA1 - 3.3V LIN Transceiver | Infineon

Infineon Technologies TLE8457DLEXUMA1 is a single-channel LIN transceiver with an integrated 3.3 V voltage regulator, 20 kBd LIN communication, and an integrated 70 mA supply for a microcontroller and peripherals. The device is packaged in an 8-pin PG-TDSON-8-1 automotive surface-mount package and is identified as AEC-Q100 qualified. Its LIN interface supports bidirectional communication compliant with LIN specification 2.2A and SAE J2602. A LIN transceiver, also called a Local Interconnect Network transceiver, connects a low-cost microcontroller to a vehicle network that uses one signal wire. The communication architecture is based on a master node and one or more slave nodes. Because LIN is designed for slow, short-range vehicle sub-networks, its physical-layer transceiver combines a regulated supply, bus interface, logic-level data interface, and fault-recovery functions in one device. The TLE8457DLEXUMA1 uses a stable 3.3 V regulator to supply a microcontroller and attached peripherals up to 70 mA. This integration can reduce the number of discrete supply components and simplify PCB allocation in compact body, comfort, or sensor nodes. The 20 kBd bus rate is suitable for LIN 2.2A applications in which nodes exchange diagnostic or control information over low-speed vehicle networks. The LIN physical layer provides bidirectional communication and is compliant with LIN specification 2.2A and SAE J2602. Its integrated regulator includes undervoltage-reset protection for the supplied microcontroller and peripherals. Exact input-voltage limits, regulator dropout behavior, bus thresholds, protection details, and timing limits should be taken directly from the Infineon TLE8457C/TLE8457D manufacturer datasheet when designing the power and interface networks. Typical uses include LIN gateway modules, door and window control units, seat-control modules, climate-control peripherals, ambient-light sensors, and other distributed vehicle nodes. The integrated 3.3 V supply is particularly useful when the host controller and its immediate peripherals operate from a common low-voltage rail while also communicating through the LIN bus. Layout the LIN bus connection for automotive transient immunity, keep the transceiver close to its connector, and provide the decoupling and protection network recommended by the manufacturer. Confirm the package land pattern and exposed-pad thermal requirements against the PG-TDSON-8-1 drawing before release because exposed-pad soldering and copper treatment strongly affect assembly yield and thermal performance. This product page organizes the manufacturer specifications, interface requirements, application context, and design constraints for engineers evaluating the TLE8457DLEXUMA1. It also distinguishes verified drop-in alternatives from merely similar automotive LIN devices, helping prevent footprint or function mismatches during replacement planning.

見積もり お問い合わせ
TLE8458GXUMA1 - Integrated 5V LIN Transceiver | Infineon
TLE8458GXUMA1

TLE8458GXUMA1 - Integrated 5V LIN Transceiver | Infineon

The Infineon TLE8458GXUMA1 is an automotive LIN transceiver with an integrated low-dropout 5 V voltage regulator, combining a 1/1 LIN bus interface and a single fixed-output regulator in an 8-pin DSO surface-mount package. The device is intended to supply a LIN-connected microcontroller while operating a LIN bus from the same automotive power architecture. A LIN transceiver is a physical-layer interface IC for the LIN bus, a low-cost single-wire automotive communication network. Its hierarchy runs from LIN transceiver to vehicle-network transceiver, automotive interface IC, and power-management semiconductor. Integrating the regulator eliminates a separate 5 V supply circuit for compatible microcontroller domains and reduces PCB area, component count, and the number of power-supply interconnects. Verified distributor data identifies the TLE8458GXUMA1 as a fixed positive, single-output LDO regulator with a minimum input voltage of 5.5 V, 2% maximum voltage tolerance, eight gull-wing terminals, and a 10.4 kBd LIN interface rate. The same 5.5 V minimum input condition permits the regulator and LIN transceiver to operate from a common automotive supply while providing a regulated 5 V rail to the attached microcontroller. The LIN side provides one driver and one receiver for a typical LIN master or slave node. It supports nodes requiring combined communication and regulated supply, such as door modules, body controllers, seat controllers, climate-control panels, lighting modules, and compact automotive sensor nodes. Because LIN uses a single-wire bus, the interface reduces wiring cost compared with a multiwire automotive network while retaining a defined physical-layer interface for distributed vehicle electronics. The 8-pin DSO package is surface mount and compact, but the exposed environmental requirements of automotive electronics make PCB planning important. Route the LIN connection away from sensitive analog and communication nodes, keep the regulator output close to its decoupling capacitor, and use a return path that avoids high-current switching currents. Verify absolute maximum voltages, output load conditions, bus termination strategy, and supply transient behavior against the manufacturer datasheet before releasing a production design. Pricing, exact absolute maximum ratings, temperature limits, output-current capability, and a complete pin map were not supplied in the verified data and therefore remain marked as data needed rather than inferred. This page consolidates distributor identification, the TLE8458G family relationship, pin-compatible stand-alone LIN-transceiver context, and practical application guidance beyond a distributor catalog listing.

見積もり お問い合わせ
TLE9222LCXUMA1 - FlexRay Transceiver | TSON-14 | Infineon
TLE9222LCXUMA1

TLE9222LCXUMA1 - FlexRay Transceiver | TSON-14 | Infineon

The Infineon TLE9222LCXUMA1 is a FlexRay transceiver IC supplied in a 14-pin PG-TSON surface-mount package (3 mm x 4.5 mm body) with an exposed thermal pad. It implements the physical layer of the FlexRay automotive networking standard and is the world's smallest FlexRay transceiver in the market per the manufacturer, addressing tight PCB real-estate constraints in chassis, powertrain and ADAS ECUs. The part supports data rates up to 10 Mbit/s, integrates bus failure management, and provides a low-power standby mode with remote wake-up capability. A FlexRay transceiver is a physical-layer (PHY) device that sits between a microcontroller's FlexRay Communication Controller and the differential FlexRay bus. It converts digital logic-level signals from the controller into differential bus voltages conforming to the FlexRay electrical specification, and vice versa for reception. The transceiver category sits within the broader automotive communication IC hierarchy of transceivers -> interface ICs -> integrated circuits. FlexRay was developed as a deterministic, fault-tolerant backbone for high-speed in-vehicle networking, supporting time-triggered and event-triggered communication with bandwidth up to 10 Mbit/s per channel. Key features of the TLE9222LCXUMA1 include an integrated bus failure detection (open, short-to-GND, short-to-VBAT) with diagnostic output, low standby current consumption for battery-sensitive applications, and an extended automotive temperature operating range. The PG-TSON-14-3 package exposes a thermal pad to the PCB for efficient heat removal through the copper pours. The TLE9222LCXUMA1 part number suffix -XUMA1 indicates reel packaging for high-volume surface-mount assembly. Typical applications for the TLE9222LCXUMA1 include electronic control units in chassis-by-wire systems (steering, braking, suspension), powertrain ECUs, ADAS sensor fusion controllers, and body-domain modules where deterministic, redundant communication is required. The combination of small package footprint, robust bus failure diagnostics, and low-power modes suits compact ECU designs where PCB area is at a premium. When designing with this device, follow Infineon's recommended PCB layout for the exposed thermal pad and use a star-grounding scheme for the bus shield connection. Always consult the manufacturer datasheet for the latest bus failure threshold values and EMC optimization recommendations for the differential bus termination network. This page synthesizes Infineon datasheet parameters, distributor pricing tiers, drop-in alternative candidates, and practical design notes - information not found in any single manufacturer datasheet page.

見積もり お問い合わせ
TLE9250XSJXUMA1 - 5Mbps CAN FD Transceiver PG-DSO-8 | Infineon
TLE9250XSJXUMA1

TLE9250XSJXUMA1 - 5Mbps CAN FD Transceiver PG-DSO-8 | Infineon

The Infineon TLE9250XSJXUMA1 is a high-speed CAN FD transceiver supporting data rates up to 5 Mbit/s, supplied in an 8-pin PG-DSO-8 package with operating voltage range 4.5 V to 5.5 V and an automotive temperature grade of -40 C to +150 C. It implements the physical layer according to ISO 11898-2 (2016) and is qualified to AEC-Q100 for automotive use, making it a drop-in interface between a microcontroller's CAN protocol controller and the differential bus wiring. The 5 Mbit/s CAN FD capability is essential for modern automotive networks carrying larger payloads such as ADAS sensor data, diagnostic telemetry, and gateway traffic. A CAN transceiver is a physical-layer interface IC that translates a microcontroller's digital CAN TXD/RXD logic-level signals into the differential CANH/CANL bus signaling required by the ISO 11898-2 standard. It also provides bus fault tolerance, dominant time-out, and ESD protection on the bus pins. In the broader hierarchy, the TLE9250XSJ sits between the protocol controller (an MCU or standalone CAN controller) and the wiring harness, protecting the controller from bus transients while driving the bus to the required differential voltage levels. Key features include very low electromagnetic emission (low EME) optimized for automotive EMI requirements, a low-power mode with remote wake-up via CAN bus activity, integrated bus pin ESD protection, dominant time-out for TXD stuck-dominant fault handling, and overtemperature shutdown. These features minimize external component count and simplify compliance with OEM EMC standards. The device also supports a 3.3 V compatible logic interface on TXD/RXD/EN/NSTB pins, allowing direct connection to modern low-voltage microcontrollers without level shifters. From an architecture standpoint, the TLE9250XSJ uses a fully integrated differential driver and receiver with separate supply pins for the digital interface (VDD, 3.3 V to 5 V) and the bus driver (VSUP, battery). This split-rail approach allows the bus to remain powered while the MCU side is off, supporting partial networking and low quiescent current in sleep mode. The internal slope control reduces radiated emissions at high bus speeds, eliminating the need for external common-mode chokes in most applications. Typical applications include automotive body control modules (BCM), gateway ECUs connecting multiple CAN sub-networks, electric vehicle battery management systems (BMS), ADAS sensor fusion nodes, and industrial CAN FD networks. Its wide supply range and automotive-grade qualification make it equally suitable for 12 V and 24 V truck/commercial-vehicle platforms. A key design consideration is the use of a common-mode choke and split bus termination (60 ohm between CANH and CANL plus two 30 ohm to ground) for optimum signal integrity at 5 Mbit/s. The non-sleep current is typically below 10 uA with remote wake-up enabled, making the part well-suited for partial networking where ECUs may be selectively powered down. This page synthesizes distributor stock, drop-in alternatives within the PG-DSO-8 footprint, and practical design guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
TLE9351VSJXTMA1 - 5Mbps CAN FD Transceiver PG-DSO-8 | Infineon
TLE9351VSJXTMA1

TLE9351VSJXTMA1 - 5Mbps CAN FD Transceiver PG-DSO-8 | Infineon

The Infineon TLE9351VSJXTMA1 is a high-speed CAN FD transceiver supporting ISO 11898-2, SAE J2284, and CAN FD up to 5 MBit/s, housed in an 8-pin PG-DSO-8 package. It operates from a 3.3V or 5V supply and includes a standby mode for low quiescent current, targeting automotive in-vehicle networks where reliable bus communication is mandatory. The part is AEC-Q100 qualified, confirming its suitability for harsh automotive electrical environments including load-dump, jump-start, and reverse-battery transients. A CAN transceiver (Controller Area Network transceiver) is a physical-layer IC that sits between a microcontroller's CAN protocol controller and the differential CAN bus. It converts single-ended TX/RX logic levels into the differential dominant/recessive bus states defined by ISO 11898-2 and rejects common-mode noise through high common-mode rejection. In the broader system hierarchy it belongs to: transceiver -> physical-layer interface -> in-vehicle networking IC -> automotive power management and communication IC -> semiconductor. CAN FD (Flexible Data-rate) extends classic CAN by increasing the data-phase bit rate while keeping the arbitration phase at the legacy bit rate, enabling larger payloads and faster ECU-to-ECU throughput. Key features include bus fault protection up to ±42V, thermal shutdown, undervoltage detection on VCC, and a low-power standby mode with bus wake-up capability. The receiver exhibits high common-mode immunity for reliable operation in noisy automotive harnesses, and the transmitter delivers a tightly controlled differential output with slope control to limit EMI. The PG-DSO-8 footprint is industry-standard for 8-pin CAN transceivers, simplifying PCB layout migration between competing solutions. Typical applications include body control modules, gateway ECUs, powertrain ECUs (where CAN FD is increasingly required), battery management system CAN interfaces, and ADAS sensor clusters. The standby mode enables quiescent current budgets in the microamp range, supporting always-on CAN networks that must wake the ECU upon bus activity. When designing with this part, place the VCC decoupling capacitor within 2mm of the VCC pin and route the CANH/CANL traces as a 100-ohm-impedance differential pair with ground stitching vias. Use a TVS diode such as NUP2105L on the bus pins to survive ISO 7637-2 pulse transients not covered by the IC's internal ±42V protection. The SPLIT pin, if used, requires a capacitor to ground. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ