集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MAX1070ETC+ - 1.5Msps 10-Bit Differential ADC | Maxim Integrated
MAX1070ETC+

MAX1070ETC+ - 1.5Msps 10-Bit Differential ADC | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX1070ETC+ is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) housed in a 12-pin TQFN-EP package. The serial-output SAR architecture delivers 1.5Msps conversion rate while consuming low power, and the true-differential analog inputs simplify signal conditioning in noisy industrial environments. What is a SAR ADC? A successive-approximation-register (SAR) ADC is a type of analog-to-digital converter that uses a binary search through an internal DAC to converge on the input voltage, producing a digital output word in N conversion clock cycles for an N-bit result. SAR ADCs sit in the broader taxonomy: ADC -> data converter -> mixed-signal IC -> semiconductor. They are valued for their deterministic latency, low power consumption, and excellent DC accuracy compared with delta-sigma or pipeline architectures. The MAX1070ETC+ operates from a single +3V supply and accepts true-differential analog inputs, making it well-suited for rejecting common-mode noise in motor-control, instrumentation, and sensor-signal applications. Key differentiating specifications include the 1.5Msps sampling rate, true-differential input architecture, low power consumption, and a compact 12-pin TQFN-EP package with an exposed thermal pad for improved thermal performance. The MAX1070ETC+ uses a successive-approximation-register (SAR) core with an internal track/hold, input multiplexer, and high-speed serial interface. The device accepts true-differential analog inputs that simplify direct connection to bridge sensors, thermocouples, and current-shunt amplifiers without external signal-conditioning op-amps. Typical applications include industrial process control, motor control and feedback loops, portable instrumentation, data acquisition systems, and sensor signal chains. The 1.5Msps throughput enables oversampling for averaging or digital filtering of low-frequency signals. When designing with this ADC, ensure the serial clock (SCLK) timing meets the datasheet setup-and-hold requirements. Place a 0.1uF bypass capacitor close to the supply pin and follow PCB layout guidelines to minimize digital-feedthrough coupling into the analog inputs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MAX1070ETC+T - 1.5Msps 10-Bit True-Diff ADC | Maxim Integrated
MAX1070ETC+T

MAX1070ETC+T - 1.5Msps 10-Bit True-Diff ADC | Maxim Integrated

The Maxim Integrated MAX1070ETC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with serial output, housed in a 12-pin TQFN-EP package. It operates from a single +3V analog supply (2.7V to 3.6V) and a separate 1.8V to 3.6V digital supply, supports true-differential analog inputs, and is specified over the -40C to +85C industrial temperature range. An ADC (Analog-to-Digital Converter) is a data-conversion integrated circuit that samples continuous analog signals and translates them into discrete binary codes for digital processing. Within the broader semiconductor taxonomy, the MAX1070 sits in the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. The MAX1070 family uses a successive-approximation-register (SAR) architecture with an integrated track/hold amplifier, an internal bandgap reference, and a high-speed serial interface, achieving up to 1.5Msps throughput while drawing only milliwatts of power. This makes it a member of the precision-converter category targeting low-power, space-constrained applications. Key features include a maximum sampling rate of 1.5Msps, true-differential analog inputs for superior common-mode noise rejection, an internal +2.5V reference (with external-reference option), a low-voltage SPITM/QSPITM/MICROWIRE-compatible serial interface, and an external shutdown input that reduces supply current to microampere levels. The device also supports bipolar analog input ranges when driven differentially around the common-mode voltage, and operates over the full -40C to +85C industrial temperature range. The MAX1070 is built on a BiCMOS process that combines low-noise CMOS analog signal paths with high-speed bipolar switching for the SAR logic and serial interface. The track/hold amplifier supports input bandwidths well above Nyquist for the 1.5Msps rate, and the differential input stage rejects common-mode noise from motors, switching power supplies, and long PCB traces. Typical applications include portable instrumentation, pen digitizers and tablets, battery-powered data loggers, isolated industrial sensor front-ends, and high-speed process-control loops. The wide input common-mode range allows direct connection to bridge sensors, thermocouple amplifiers, and current-sense amplifiers without additional signal conditioning. When designing with this device, provide a clean analog ground plane and decouple AVDD and DVDD with separate 0.1uF and 10uF ceramic capacitors placed as close as possible to the supply pins. The serial interface timing budget must respect the tACQ and tCONV specifications referenced in the manufacturer datasheet to avoid conversion errors at full speed. This page synthesizes distributor pricing, drop-in same-package alternatives, and application guidance for engineers selecting a 10-bit 1.5Msps differential ADC in a 12-pin TQFN.

見積もり お問い合わせ
MAX1071CTC+T - 1.5Msps 10-Bit Differential SAR ADC | Analog Devices
MAX1071CTC+T

MAX1071CTC+T - 1.5Msps 10-Bit Differential SAR ADC | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX1071CTC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit successive-approximation analog-to-digital converter (SAR ADC) housed in a 12-pin TQFN (4x4 mm) package with an exposed thermal pad. The part delivers up to 1.5 million samples per second through a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, while drawing only a few milliwatts of power from a single 2.7V to 3.6V analog supply. According to the manufacturer datasheet, the MAX1070 and MAX1071 are pin-compatible family members that differ primarily in resolution (MAX1070 is 12-bit, MAX1071 is 10-bit), giving designers a migration path between precision levels without PCB rework. A successive-approximation ADC is a type of data converter that converts an analog input voltage into a digital code through a binary-search algorithm using an internal DAC and comparator. SAR ADCs sit in the hierarchy: ADC -> data converter -> data acquisition IC -> signal chain IC -> semiconductor. They are favored for applications requiring high accuracy, low latency, and deterministic sampling, which sets them apart from delta-sigma ADCs (higher resolution, slower) and pipeline ADCs (very fast, higher latency). The MAX1071 belongs to the SAR family. Key features include true-differential analog inputs for superior common-mode noise rejection, an internal 2.5V reference (with the option to drive an external reference), an SPITM/QSPI/MICROWIRE-compatible serial interface, and a hardware- or software-controlled shutdown mode that drops supply current to the microampere range between conversions. The 12-pin TQFN package offers a compact 4x4 mm footprint with an exposed pad for low thermal resistance and improved electrical grounding. The +T suffix indicates tape-and-reel packaging for high-volume assembly. From an architecture standpoint, the MAX1071 uses a capacitive-charge-distribution DAC combined with a high-bandwidth comparator and a precision 2.5V bandgap reference. The true-differential input structure allows direct measurement of bridge sensors, thermocouples, and other small differential signals without external instrumentation amplifiers, which simplifies the analog front-end and reduces total BOM cost. Typical applications include industrial process control, data acquisition systems, portable instrumentation, battery-powered sensor monitoring, optical module monitoring, and motor control feedback loops. The differential input architecture also makes it well-suited to medical instrumentation front-ends and sonar/radar intermediate-frequency sampling where ground noise is a concern. A key design consideration is input common-mode voltage and source impedance: the input sampling capacitors require adequate settling time, so place a low-impedance buffer or anti-alias RC network immediately ahead of AIN+ and AIN-. For best linearity, drive REF+ directly from a low-noise reference source and decouple REF- to analog ground with a 0.1uF ceramic capacitor placed within a few millimeters of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers choose and qualify the MAX1071CTC+T with confidence.

見積もり お問い合わせ
MAX1076CTC+T - 10-Bit 1.8Msps SAR ADC, True-Diff, 12-TQFN | Maxim
MAX1076CTC+T

MAX1076CTC+T - 10-Bit 1.8Msps SAR ADC, True-Diff, 12-TQFN | Maxim

The Maxim Integrated (Analog Devices) MAX1076CTC+T is a 10-bit, 1.8Msps, single-supply, low-power, true-differential, successive-approximation analog-to-digital converter (SAR ADC) with an internal reference, housed in a 12-pin TQFN (4x4 mm) package. The MAX1076/MAX1078 family combines a 1.8 Msps sample rate with true-differential inputs and an integrated precision reference, eliminating the need for an external reference in most designs. The +T suffix indicates Tape & Reel packaging per Maxim/Analog Devices ordering convention. An SAR (Successive Approximation Register) ADC is a type of analog-to-digital converter that performs a binary search through successive bit-weights using an internal DAC and a sample-and-hold circuit. SAR ADCs occupy the speed/resolution sweet spot between slow slope converters and high-speed flash ADCs, and are widely used for data acquisition, instrumentation, and process control where 8-16 bits and 100 ksps to several Msps are required. The MAX1076CTC+T belongs to this category, and as a true-differential part it rejects common-mode noise from industrial sensor front-ends - a key advantage in motor control and PLC analog input modules. Key features include a true-differential analog input, internal 2.5 V reference, single 2.7 V to 3.6 V supply operation, SPI/QSPI/MICROWIRE-compatible serial interface, low power consumption, and a hardware shutdown pin for battery-powered systems. The serial-interface architecture minimises pin count to just 12 pins while supporting daisy-chain connection to ADCs sharing the same bus. The MAX1076CTC+T uses a charge-distribution DAC array and an on-chip sample/hold, achieving 10-bit linearity at 1.8 Msps with low integral non-linearity (INL) and differential non-linearity (DNL) suitable for instrumentation and control loops. The internal reference eliminates external reference drift concerns, simplifying BOM cost and board area. Typical applications include portable instrumentation, data acquisition systems, process control loops, medical instrumentation, and battery-powered sensor interfaces. The combination of true-differential input and integrated reference makes the part particularly attractive for industrial 4-20 mA loop receivers and motor-control current-sense paths. When designing with this device, allocate adequate PCB space for the exposed pad (EP) - it must be soldered to the ground plane for thermal dissipation and electrical performance. Use low-ESR ceramic bypass capacitors as recommended by the datasheet and verify the common-mode voltage at the inputs remains within the input common-mode range. This page synthesises distributor pricing, drop-in alternatives, and practical design notes beyond what is shown on the manufacturer datasheet or distributor product listings.

見積もり お問い合わせ
MAX1078CTC+ - 10-Bit 1.8MSPS Differential ADC | Maxim Integrated
MAX1078CTC+

MAX1078CTC+ - 10-Bit 1.8MSPS Differential ADC | Maxim Integrated

The Maxim Integrated MAX1078CTC+ is a 1.8Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, housed in a 12-pin TQFN (4x4) package. It is part of the MAX1076/MAX1078 family of high-speed, serial-output ADCs targeting data-acquisition applications where low power, small footprint, and true-differential input capability are essential. An ADC (Analog-to-Digital Converter) is a data-conversion integrated circuit that samples a continuous analog input voltage and produces a discrete digital code representing its magnitude, using successive-approximation or pipeline architectures. The MAX1078 specifically uses a successive-approximation register (SAR) topology, which provides deterministic latency (single conversion cycle) and inherently low power consumption at moderate sample rates - making it well suited to multiplexing between multiple sensor channels in industrial and instrumentation systems. Key differentiating features include a true-differential analog input (rejecting common-mode noise that single-ended ADCs cannot), an internal 2.5V reference (eliminating external reference components and saving board area), a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, and a low 1.8MSPS throughput that oversamples audio and vibration bands. The device operates from a single +2.7V to +3.6V analog supply and a +1.8V to +3.6V digital supply, simplifying power-tree design in 3.3V systems. The MAX1078 employs a switched-capacitor input stage optimized for signals from DC to several hundred kHz, with input bandwidth exceeding 4MHz. Its successive-approximation architecture, charge-redistribution DAC, and on-chip clock generate conversions with no pipeline delay, allowing direct use in closed-loop control or multiplexed data-acquisition front-ends. Typical applications include data-acquisition systems, portable instrumentation, pen-digitizers and tablets, loop-powered industrial transmitters, and vibration / audio monitoring. The wide input common-mode range and integrated reference make the device especially attractive for sensors with ground-referred or remotely-grounded outputs. When designing with the MAX1078, place the 0.1uF and 10uF decoupling capacitors as close as possible to the AVDD/DVDD pins and route the digital SPI lines with reference to a solid ground plane, ideally with series termination to suppress reflections. For best dynamic performance, drive the true-differential inputs (IN+ and IN-) symmetrically and keep input traces length-matched. This page synthesizes distributor pricing, drop-in alternatives, and PCB-level design notes not found in the manufacturer datasheet, enabling faster part selection and schematic entry.

見積もり お問い合わせ
MAX1078CTC+T - 1.8Msps 10-Bit Differential ADC | Maxim Integrated
MAX1078CTC+T

MAX1078CTC+T - 1.8Msps 10-Bit Differential ADC | Maxim Integrated

The Maxim Integrated MAX1078CTC+T is a 1.8 Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, housed in a 12-pin TQFN-EP package. The part is a high-speed, serial-output successive-approximation ADC designed for low-power applications, offering a fully differential input stage with bipolar input range capability when used with external resistors. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes. The MAX1078 belongs to the successive-approximation register (SAR) ADC family, which uses a binary-search algorithm with an internal DAC to compare the input against successive reference voltages, settling in N clock cycles for an N-bit resolution. SAR ADCs are prized for their deterministic latency, low power consumption, and ease of use in multiplexed data-acquisition systems. Key features of the MAX1078CTC+T include a 1.8 Msps maximum sampling rate, true-differential analog inputs capable of unipolar (0 to VREF) or bipolar (±VREF) operation, an internal 2.5 V precision reference, an external clock input, and a SPITM/QSPITM/MICROWIRETM-compatible serial interface. The device operates from a single +2.7 V to +3.6 V analog supply and draws a low quiescent current, making it suitable for battery-powered and portable instrumentation. The MAX1078 employs a charge-distribution DAC architecture with an input track-and-hold, achieving excellent dynamic performance at high sampling rates. The internal reference eliminates the need for an external reference IC, reducing BOM cost and PCB area. Hardware and software shutdown modes reduce supply current to <1 µA between conversions for further power savings in duty-cycled applications. Typical applications include portable instrumentation, data-acquisition systems, process-control monitoring, and digital sensor signal conditioning. The wide 2.7 V to 3.6 V supply range and small TQFN-12 footprint also suit space-constrained medical and industrial modules. When designing with the MAX1078, place the 0.1 µF and 10 µF decoupling capacitors as close as possible to the AVDD and DVDD pins and route the analog and digital ground planes separately, joining them at a single point beneath the exposed pad. The internal reference is bypassed with a 1 µF capacitor on REF. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design guidance drawn directly from the manufacturer datasheet and Maxim Integrated application notes, giving engineers a one-stop reference that complements the official product documentation.

見積もり お問い合わせ
MAX1079CTC+ - 10-Bit 1.5Msps Differential ADC | Maxim Integrated
MAX1079CTC+

MAX1079CTC+ - 10-Bit 1.5Msps Differential ADC | Maxim Integrated

The Analog Devices / Maxim Integrated MAX1079CTC+ is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with internal reference, housed in a 12-pin TQFN (HVQCCN) package. It operates from a +2.7V to +3.6V analog supply and a +1.8V to AVDD digital supply, supporting true-differential analog inputs for high-noise-immunity signal acquisition. An analog-to-digital converter (ADC) is a data acquisition component that converts continuous analog signals into discrete digital codes, forming the front-end of nearly every measurement, instrumentation, and sensor-interface system. Successive-approximation register (SAR) ADCs like the MAX1079 balance speed and resolution for multiplexed industrial channels. In the broader taxonomy, the MAX1079 sits under ADC -> data converter -> signal chain IC -> semiconductor. Key features include a 1.5Msps sampling rate, 10-bit resolution with no missing codes, a true-differential analog input with ±VREF common-mode range, an internal +2.5V precision reference, and SPI/QSPI/MICROWIRE-compatible serial interface. The part also offers an external reference option for applications requiring ratiometric measurements, plus a low-power shutdown mode that reduces supply current to < 1 µA for battery-powered designs. The MAX1079 uses a charge-redistribution SAR architecture with an input T/H, achieving excellent AC and DC performance at low power. A dedicated REF pin allows either the internal 2.5V reference or an external reference, giving designers flexibility between absolute and ratiometric conversions. The serial interface shifts out data MSB-first, simplifying firmware on most microcontrollers. Typical applications include industrial process control, data acquisition systems, portable instrumentation, medical instrumentation, and sensor signal conditioning. The wide input common-mode range makes it ideal for bridge sensors and thermocouple interfaces where ground offsets are common. When designing with this device, decouple AVDD and DVDD close to the IC with 0.1µF ceramic capacitors, and add a 10µF bulk capacitor at the supply pins. Maintain a clean analog ground return; digital return currents must not cross the analog ground plane under the ADC. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MAX1079CTC+T - 1.5Msps 10-Bit Diff ADC, Internal Ref | Maxim
MAX1079CTC+T

MAX1079CTC+T - 1.5Msps 10-Bit Diff ADC, Internal Ref | Maxim

The Maxim Integrated MAX1079CTC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, packaged in a 12-pin WQFN (HVQCCN, 4x4 mm) with exposed thermal pad. According to the Maxim datasheet (datasheet identified by DigChip data ID 3279617), the MAX1077/MAX1079 family uses a successive-approximation architecture with a serial SPI/QSPI/MICROWIRE-compatible interface, operates from a single 2.7V to 3.6V analog supply, and dissipates a maximum of approximately 1.8 mA at 1.5 Msps full throughput. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that converts a continuous analog input voltage into a discrete N-bit binary code. Successive-approximation ADCs use an internal DAC and comparator to binary-search the input, trading off conversion speed against area and power. The MAX1079 sits in the broader hierarchy: ADC -> data converter -> data converter IC -> signal-chain IC -> semiconductor. Within Maxim's portfolio it belongs to the low-power, high-speed, serial-interface 10-bit SAR family. Key features of the MAX1079CTC+T include true-differential analog inputs (rejecting common-mode noise), an internal 2.5V reference (eliminating an external reference IC and saving board space), automatic shutdown between conversions for battery savings, and a small 4x4 mm WQFN-12 footprint suited to space-constrained PCBs. The MAX1079 differs from MAX1077 by offering 225ksps minimum throughput at the slower part number and 1.5Msps on the MAX1079. Architecturally, the device integrates an input track-and-hold, a charge-redistribution SAR core, an internal 2.5V bandgap reference, and a serial interface block. The internal reference eliminates external reference drift errors, while the true-differential input allows direct connection to bridge sensors, thermocouples via instrumentation amplifiers, and differential signal chains without an external differential amplifier in many cases. Typical applications include portable data acquisition, industrial process control loop monitoring, battery-powered instrumentation, medical sensor front ends, optical-module monitoring, and consumer audio level meters. The MAX1079 is particularly suited to systems that need more than 225 ksps but are power-sensitive on battery power. When designing with the MAX1079CTC+T, ensure the analog supply is well decoupled (1 uF + 0.1 uF) and that the exposed pad is soldered to a ground pour to provide a low-impedance thermal and electrical return. The serial-interface timing budget must respect the 1.5 Msps maximum fSAMPLE; higher SPI clock rates will not increase throughput beyond the converter's intrinsic limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is published in the manufacturer datasheet.

見積もり お問い合わせ
MAX107ECS+ - Dual 6-Bit 400MSPS ADC | Maxim Integrated
MAX107ECS+

MAX107ECS+ - Dual 6-Bit 400MSPS ADC | Maxim Integrated

Maxim Integrated MAX107ECS+ is a dual-channel, 6-bit, 400MSPS flash analog-to-digital converter with an on-chip wideband input amplifier, supplied in an 80-pin TQFP exposed-pad package. The converter supports 3.3V to 5V operation and provides parallel and demultiplexed differential LVDS output options for high-speed baseband signal capture. An ADC is a data-conversion IC that samples an analog voltage and converts it into a digital value. Within the broader semiconductor hierarchy, the MAX107ECS+ is a flash ADC, a data-converter IC, and a high-speed signal-processing component. Flash architectures use a bank of comparators to perform single-cycle parallel conversion, making this device suitable for demanding acquisition stages rather than low-rate precision measurement. The MAX107ECS+ combines two conversion channels with a 6-bit code width and a maximum sampling rate of 400MSPS. Its on-chip wideband input amplifier reduces the external analog front-end required for many I/Q baseband systems. Demultiplexed differential LVDS outputs support reliable transfer of high-speed digital data between the converter and downstream processing electronics, while parallel output provides an alternative interface architecture. The manufacturer datasheet identifies the device as a dual 6-bit converter for fast and precise digitizing of in-phase and quadrature baseband signals. Its 400MSPS throughput gives each channel 2.5 ns between ideal sampling intervals. The 6-bit resolution provides 64 digital codes, making the converter particularly useful when system timing, gain, and signal-to-noise performance matter more than fine amplitude quantization. Typical applications include I/Q baseband digitization, communications receivers, radar signal processing, digital oscilloscopes, spectrum analyzers, and high-speed test equipment. Two integrated channels also support coherent sampling of quadrature signals, allowing one converter to process the in-phase and quadrature channels of a complex baseband waveform. PCB design should preserve the integrity of the differential LVDS clock and data paths. Place decoupling and analog-input components close to the relevant device pins, maintain the recommended package footprint and exposed-pad soldering pattern, and route high-speed outputs over a continuous reference plane with minimal stubs. Differential impedance and return-path discontinuities can degrade edge quality even when nominal sample-rate and resolution targets are met. This product page consolidates the MAX107ECS+ electrical characteristics, package details, application guidance, comparison information, and verified sourcing links. It also identifies the distinction between the base MAX107ECS ordering code and the MAX107ECS+ designation, helping engineers verify procurement configuration before PCB release.

見積もり お問い合わせ
MAX1080BCUP+ - 400ksps 10-Bit 8-Ch Serial ADC | Maxim Integrated
MAX1080BCUP+

MAX1080BCUP+ - 400ksps 10-Bit 8-Ch Serial ADC | Maxim Integrated

The Maxim Integrated MAX1080BCUP+ is a 400 ksps, single-supply, low-power, 8-channel, 10-bit successive-approximation analog-to-digital converter (SAR ADC) with an internal reference, high-bandwidth track/hold, and SPI/QSPI/MICROWIRE-compatible serial interface, housed in a 20-pin TSSOP package. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a type of data converter that uses a binary-search algorithm against an internal DAC to digitize an analog input, one bit per clock cycle. SAR ADCs occupy the middle ground between flash converters (fastest, lowest resolution) and sigma-delta converters (slowest, highest resolution), making them the workhorse choice for 8- to 16-bit, 100 ksps to 1 Msps general-purpose data-acquisition systems. The MAX1080 combines an 8-channel input multiplexer with a single ADC, allowing eight single-ended or four pseudo-differential analog inputs to be sampled sequentially. Key specifications include 400 ksps maximum sampling rate (300 ksps in some modes), single 4.5V to 5.5V analog supply, low 2.5 mA operating supply current, and an internal 2.5V reference. The TSSOP-20 (CUP) package saves board space while the serial interface reduces pin count versus parallel ADCs of the same generation. Internally, the MAX1080 uses a capacitive-charge-distribution DAC with input track/hold, an on-chip clock generator, and a serial-output shift register. The architecture delivers 10-bit no-missing-code performance with excellent dynamic range for its power class, and the internal reference eliminates the need for an external precision reference component. Typical applications include portable data loggers, system health monitoring, six-channel data acquisition front-ends, industrial process control loops, and battery-powered instrumentation. The wide analog input range (0 to VREF or 0 to 2xVREF in software-configurable modes) and low power make it especially suitable for multichannel embedded sensor reading. When designing with this device, ensure input RC antialiasing components are matched to the channel acquisition time; the multiplexer settling time limits high-impedance source accuracy. Always provide a clean analog ground separate from digital return paths to avoid code-dependent noise. This page synthesizes distributor pricing, drop-in equivalents, and practical design notes not found in the standalone Maxim datasheet.

見積もり お問い合わせ
MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated
MAX1081BCUP

MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated

The Maxim Integrated MAX1081BCUP is a 10-bit, 8-channel, single-supply successive-approximation analog-to-digital converter (SAR ADC) that integrates an 8-input multiplexer, a high-bandwidth track/hold amplifier, an internal +2.5V reference, and an SPI/QSPI/MICROWIRE-compatible serial port. Housed in a 20-pin TSSOP package, it achieves up to 400 ksps throughput on a single +2.7V to +3.6V supply while consuming only 2.5 mA typical operating current. An SAR ADC is a successive-approximation register analog-to-digital converter - a category of data converter that uses a binary-search algorithm and an internal DAC to digitize an analog input one bit at a time per clock cycle. SAR ADCs occupy a middle position in the data-converter hierarchy between flash ADCs (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, slowest). They deliver an excellent trade-off between speed, resolution, and power, which is why they dominate multi-channel, low-power embedded acquisition tasks. Key features include software-configurable analog inputs (unipolar/bipolar, single-ended/differential), four software-selectable power modes (normal, REDP, FASTPD, FULLPD), a hardware active-low SHDN pin, and automatic shutdown at the end of conversion to minimize battery drain. Internal +2.5V reference eliminates the need for an external reference in many designs, while analog inputs accept 0V-to-VREF or +/- VREF rails. The device combines a high-bandwidth track/hold (T/H) front-end that supports signals well beyond the Nyquist limit of its 400 ksps maximum sampling rate, ensuring accurate acquisition of fast transients. Its serial interface is SPI/QSPI/MICROWIRE-compatible, allowing direct connection to most microcontrollers and DSPs without glue logic. Typical applications include portable data acquisition, battery-powered instrumentation, multichannel sensor monitoring, process control, patient monitoring, and pen digitizers. The 8-channel input mux makes it well-suited for systems that must digitize multiple analog sources with one ADC. When designing with this part, place a 0.1uF bypass cap within 5 mm of VDD/REF pins and route analog and digital grounds separately back to a star ground to preserve the 10-bit linearity. AutoShutdown between conversions drops supply current to sub-microamp levels, so firmware should explicitly wake the part before each conversion burst. This page consolidates distributor stock, datasheet links, drop-in TSSOP-20 alternatives, and practical layout guidance not found on a single manufacturer page.

見積もり お問い合わせ
MAX1082ACUE+T - 10-Bit 400ksps 4-Ch Serial ADC | Maxim
MAX1082ACUE+T

MAX1082ACUE+T - 10-Bit 400ksps 4-Ch Serial ADC | Maxim

The Maxim Integrated MAX1082ACUE+T is a 10-bit resolution, 400 ksps (or 300 ksps for the MAX1082 grade), successive-approximation-register (SAR) analog-to-digital converter with a 4-input analog multiplexer, high-bandwidth track/hold, and an internal reference, all integrated into a 16-pin TSSOP package with tape-and-reel packaging. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that samples a continuous-time analog signal and quantizes it into a digital code for processing by a microcontroller, FPGA, or DSP. SAR ADCs specifically use a binary-search successive-approximation algorithm, balancing speed, accuracy, and low power consumption, which makes them ideal for multiplexed data-acquisition systems. The MAX1082ACUE+T belongs to the broader hierarchy: SAR ADC -> ADC -> data converter -> mixed-signal IC -> semiconductor. Key features include a single-supply +2.7V to +3.6V analog supply (with a separate 3.3V-or-5V-tolerant digital interface on the MAX1083 variant), a hardware-configurable 2-channel or 4-channel analog input multiplexer (mux), an internal 2.5V reference, and a SPI/QSPI/MICROWIRE-compatible 4-wire serial interface that allows direct connection to most microcontrollers and DSPs without glue logic. The architecture pairs an input track/hold with the SAR core and an on-chip reference, eliminating the need for an external reference in many applications and reducing total BOM count. The wide input common-mode range and low analog-input leakage extend the device's usefulness in industrial sensor-interface designs. Typical applications include portable data logging, patient-monitoring and portable medical instruments, process-control analog I/O modules, and battery-powered instrumentation. The combination of low power consumption, small TSSOP-16 footprint, and 4-channel input mux makes it particularly well-suited to multi-sensor handheld designs where board space and battery life are at a premium. When designing with the MAX1082ACUE+T, ensure that decoupling capacitors are placed as close as possible to AVDD/DVDD, and that the analog and digital ground planes are joined at a single star point under the exposed thermal pad to minimize noise coupling into the SAR comparator. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone manufacturer datasheet, providing engineers with a decision-ready procurement and design reference.

見積もり お問い合わせ
MAX1082AEUE+TW - 10-Bit 400ksps 4-Ch SAR ADC | Maxim Integrated
MAX1082AEUE+TW

MAX1082AEUE+TW - 10-Bit 400ksps 4-Ch SAR ADC | Maxim Integrated

The Maxim Integrated MAX1082AEUE+TW is a 10-bit, 400ksps, single-supply, 4-channel serial analog-to-digital converter (ADC) with internal reference, housed in a 16-pin TSSOP package. The device accepts analog inputs from 0 to +5V on a single +5V supply and supports an external reference option. The +TW suffix denotes tape-and-reel packaging for high-volume assembly. An SAR (Successive Approximation Register) ADC is a type of data converter that performs a binary search through the input voltage using an internal DAC and comparator, delivering a fixed conversion time independent of input magnitude. SAR ADCs occupy a middle ground between slow but precise delta-sigma ADCs and fast flash ADCs, making them the workhorse choice for industrial control, instrumentation, and multi-channel data-acquisition front-ends where deterministic latency and 8-12 bit resolution are required. Key specifications of the MAX1082AEUE+TW include 400ksps sampling rate (300ksps variant MAX1083 also shares the family), 10-bit resolution with ±1 LSB linearity, four single-ended analog input channels multiplexed through an on-chip T/H (track-and-hold), an internal 4.096V reference, and an SPI/QSPI/MICROWIRE-compatible serial interface. The device operates from a single +5V analog supply and a separate +5V or +3V digital supply, drawing only 2.5 mA operating current. The MAX1082AEUE+TW architecture combines an input MUX with a wide-bandwidth T/H front-end to settle 10-bit conversions in under 2.5 us, then shifts the result out through a 4-wire serial port. Internal software-configurable power-down reduces supply current to under 10 µA between conversions, enabling battery-friendly periodic-sampling designs. Typical applications include industrial process control loops, weigh-scale and load-cell signal chains, portable battery instrumentation, multi-zone temperature monitoring, and 4-20 mA loop digitization. The internal 4.096V reference conveniently scales a 0-4V sensor output directly to full-scale 10-bit codes. When designing with this ADC, place 0.1 uF and 10 uF decoupling capacitors as close as possible to the AVDD and DVDD pins and route the analog ground (REF_) and digital ground (DGND) as separate traces meeting only at the device GND pin. For highest DC accuracy, enable the internal reference and avoid injecting digital switching currents into the reference node.

見積もり お問い合わせ
MAX1082AEUE+W - 10-Bit, 4-Ch, 300ksps SAR ADC | Maxim Integrated
MAX1082AEUE+W

MAX1082AEUE+W - 10-Bit, 4-Ch, 300ksps SAR ADC | Maxim Integrated

The Maxim Integrated MAX1082AEUE+W is a 10-bit resolution, 4-channel successive-approximation analog-to-digital converter (SAR ADC) capable of 300 ksps throughput in a 16-pin TSSOP package. The MAX1082 variant pairs the internal 2.5V reference with 300 ksps sampling; the closely related MAX1083 in the same family offers 400 ksps throughput for higher-speed designs. Both devices combine a 4-channel analog-input multiplexer, a high-bandwidth track/hold amplifier, and a serial (SPI/QSPI/MICROWIRE-compatible) interface on a single +2.7V to +3.6V supply. Background: An ADC (analog-to-digital converter) is a data-converter IC that translates real-world analog signals into digital codes for downstream processing by a microcontroller, DSP, or FPGA. Within ADC taxonomy, the MAX1082 sits in the successive-approximation (SAR) subfamily, which offers deterministic low-latency conversion ideal for multiplexed multi-channel data-acquisition. SAR ADCs typically deliver 8- to 18-bit resolution with sample rates from 100 ksps to several Msps, dominating general-purpose industrial and instrumentation applications. Within the broader power-management and signal-chain hierarchy, the ADC sits between analog signal-conditioning blocks (op-amps, muxes) and the digital host. Key features include a true-differential analog-input track/hold stage, software-configurable unipolar/bipolar and single-ended/differential input modes, low +2.5V internal reference (or external-reference option), hardware- or software-controlled power-down modes, and an SPI/QSPI/MICROWIRE-compatible 4-wire serial interface. The MAX1082AEUE+W operates from a single +2.7V to +3.6V supply and typically draws only 2.5 mA at full throughput, dropping to 1 µA in power-down for battery-friendly designs. The architecture uses a charge-redistribution DAC array with an input T/H that achieves > 200 kHz small-signal bandwidth - more than enough for the 300 ksps Nyquist requirement, so input signals up to ~150 kHz can be sampled without distortion penalty. The internal 2.5V reference eliminates external components, simplifying multi-channel designs where PCB real estate and BOM count matter. Pseudo-differential and true-differential input modes allow direct connection to bridge sensors, thermocouples (after amplification), and 4-20 mA current loops through a sense resistor. Typical applications include portable data logging, multi-channel process-control instrumentation, battery-powered measurement systems, factory-automation sensor interfaces, and patient-monitoring front-ends in medical electronics. The combination of low power consumption, small TSSOP-16 footprint, and 4-channel integration makes the MAX1082AEUE+W particularly attractive when replacing discrete ADC + MUX + reference solutions to reduce board area. Design consideration: For best linearity, drive the analog inputs with a low-impedance source (op-amp buffer) and place a 0.1 µF ceramic bypass capacitor within 5 mm of the AVDD pin. Avoid switching digital signals near the analog traces to preserve the 60 dB SINAD. This page synthesizes real-time distributor pricing, drop-in same-family alternatives, and application-specific design notes beyond what is in the manufacturer datasheet alone.

見積もり お問い合わせ
MAX1084BCSA - 400ksps Serial 10-Bit ADC | Maxim Integrated
MAX1084BCSA

MAX1084BCSA - 400ksps Serial 10-Bit ADC | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX1084BCSA is a 400ksps/300ksps, single-supply, low-power, serial 10-bit analog-to-digital converter (ADC) with an internal reference, housed in an 8-pin SOIC (CSA) package. It combines a wide-bandwidth track-and-hold, a high-speed serial interface, and an internal 2.5V reference, delivering 10-bit resolution at up to 400ksps (MAX1084) or 300ksps (MAX1085) while operating from a single 4.5V to 5.5V analog supply. According to the Maxim datasheet, the device integrates a successive-approximation register (SAR) ADC core optimized for low power dissipation. An analog-to-digital converter (ADC) is a data-acquisition component that converts a continuous analog input voltage into a discrete digital code. SAR (Successive Approximation Register) ADCs use a binary-search algorithm against an internal DAC to resolve each conversion in N clock cycles, where N is the bit resolution (10 cycles for a 10-bit ADC). They sit within the data-converter hierarchy: ADC -> data converter -> data acquisition IC -> signal chain -> mixed-signal SoC. Compared with delta-sigma ADCs, SAR converters offer higher sample rates and lower latency, making them ideal for multiplexed multi-channel systems. Key features include 4.5V to 5.5V single-supply operation, an internal 2.5V reference (MAX1084A/MAX1085A) or external reference option, a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, and low power consumption (typical 1.9mA at 400ksps, dropping to under 10µA in shutdown). The serial-interface daisy-chain capability allows multiple ADCs to share one processor port, reducing board area in multi-channel designs. The MAX1084BCSA uses a capacitive-charge redistribution SAR architecture with an input track-and-hold capable of handling full-scale inputs up to VREF. Its serial interface outputs MSB-first data with an external SCLK, simplifying connection to microcontrollers and DSPs. The 'BC' speed-grade suffix denotes the 400ksps MAX1084 variant (the 300ksps MAX1085 uses 'AC'). Typical applications include remote-sensor signal acquisition, portable data loggers, battery-powered instrumentation, multi-channel multiplexed data-acquisition systems, and pen-digitizer or touch-screen interfaces. Designers favor this part when serial output, small footprint (SO-8), and low quiescent current matter most. A practical design consideration: because the part is specified for 4.5V-5.5V analog supply, it is not directly 3.3V-rail compatible without a level shifter or local LDO. Decouple AVDD with a 10µF tantalum in parallel with a 0.1µF ceramic placed within 5mm of the supply pin. This page synthesizes real distributor pricing, pin-compatible drop-in alternatives from the Maxim MAX108x family, and practical PCB design notes not consolidated on any single distributor or manufacturer page.

見積もり お問い合わせ
MAX1084BCSA+T - 10-Bit 400ksps Serial ADC | Maxim Integrated
MAX1084BCSA+T

MAX1084BCSA+T - 10-Bit 400ksps Serial ADC | Maxim Integrated

The Maxim Integrated MAX1084BCSA+T is a 10-bit, 400ksps (kilosamples per second) single-supply, low-power, successive-approximation analog-to-digital converter (ADC) with an internal reference, offered in an 8-pin SO (SOIC) package with tape-and-reel packaging (the “+T” suffix). An ADC (analog-to-digital converter) is a data-conversion integrated circuit that samples continuous analog voltages and outputs discrete binary codes suitable for microcontrollers, DSPs, or FPGAs. Within the converter family hierarchy, the MAX1084 belongs to the successive-approximation register (SAR) ADC category, which sits under precision ADCs, which in turn sit under data converters and signal-chain ICs. SAR ADCs are valued for deterministic latency, low power, and high accuracy at moderate sample rates, making them the workhorse choice for multiplexed sensor reading and industrial control. Key electrical specifications include a 10-bit resolution, a 400 ksps maximum sample rate (when using an external clock), a single +5V analog supply, low power consumption suitable for battery-powered designs, an internal reference (eliminating an external reference IC), an SPI/QSPI/MICROWIRE-compatible serial interface, and an integrated high-bandwidth track/hold. According to the Maxim datasheet family (MAX1084/MAX1085), these converters combine ease of use with small footprint for space-constrained boards. Typical applications where the MAX1084BCSA+T fits well include remote-sensor and data-acquisition systems, portable and battery-powered instruments, process control loops, multiplexed analog input modules, and instrumentation where low quiescent current and small 8-pin SO packaging are required. The internal reference simplifies BOM (bill of materials) and PCB area, while the SPI-compatible serial interface minimizes microcontroller pin count. When designing with this ADC, ensure that the analog input does not violate the absolute input range relative to the analog supply rail, and place the recommended 0.1µF supply bypass capacitor directly at the AVDD pin. The serial interface allows direct connection to microcontrollers without external glue logic. This page synthesizes distributor pricing, parametric alternatives, and practical design notes not found on a single manufacturer datasheet page — a consolidated reference for engineers evaluating the MAX1084BCSA+T for new designs or as a drop-in replacement for MAX1242/MAX1243-series devices, which the datasheet notes are pin-compatible predecessors with lower sample rates.

見積もり お問い合わせ
MAX1084BESA - 10-Bit 400ksps SAR ADC | Maxim Integrated
MAX1084BESA

MAX1084BESA - 10-Bit 400ksps SAR ADC | Maxim Integrated

The Maxim Integrated MAX1084BESA is a 10-bit successive-approximation analog-to-digital converter (SAR ADC) that samples at up to 400 ksps in an 8-pin SOIC surface-mount package. The part combines a high-bandwidth track-and-hold, a serial interface, an internal +2.5V reference, and low power consumption in a single-supply 5V design. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm against an internal DAC to digitize an analog input one bit at a time per clock cycle. The architecture is favored for medium-resolution, medium-speed precision applications because it delivers deterministic latency and excellent DC accuracy without the complexity of pipeline or delta-sigma stages. SAR converters sit within the broader data-converter hierarchy above flash and integrating ADCs but below most delta-sigma and pipelined architectures in conversion speed. Key features of the MAX1084BESA include 400 ksps sampling rate, an internal +2.5V reference (eliminating an external reference component), single 5V analog supply operation, an SPI-/QSPI-/MICROWIRE-compatible serial interface, and a hardware shutdown pin for power saving. Low power consumption and an 8-pin small-outline package make the device well-suited to space- and energy-constrained designs. The MAX1084BESA is pin-compatible and a higher-speed functional upgrade to the legacy MAX1242/MAX1243 family, allowing designers to migrate existing boards to faster sampling with no PCB rework. Compared with the slower MAX1085 (300 ksps), it doubles throughput for the same package and pinout, simplifying BOM consolidation across speed variants. Typical applications include remote-sensor signal acquisition, industrial process control, portable instrumentation, weigh scales, and patient-monitoring front ends. The internal reference and small SO footprint reduce external parts count for handheld and battery-powered systems. When designing in this part, place the 0.1 µF bypass capacitor as close to the supply pin as the layout allows and keep analog/digital grounds joined at a single star point. Use the SHDN pin in battery-powered designs to idle the converter between conversions and minimize quiescent draw. The serial interface allows galvanic isolation through low-cost digital isolators where patient-safety or industrial isolation is required.

見積もり お問い合わせ
MAX1085ACSA+ - 10-Bit 300ksps Serial ADC | Maxim Integrated
MAX1085ACSA+

MAX1085ACSA+ - 10-Bit 300ksps Serial ADC | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX1085ACSA+ is a 10-bit, 300 ksps, single-supply, low-power, serial-interface successive-approximation analog-to-digital converter (ADC) housed in an 8-pin SOIC (NSOIC/SOP) package. It combines a high-bandwidth track/hold, a serial SPI/QSPI/MICROWIRE-compatible interface, an internal +2.5V reference, and a low-power architecture, drawing only 2.5 mA typical supply current at 300 ksps while automatically powering down to under 1 µA between conversions. An SAR ADC is a successive-approximation register analog-to-digital converter — a type of data converter that uses a binary-search algorithm against a precision DAC to digitize an analog input one bit per clock cycle. SAR ADCs sit in the broader hierarchy of: ADC -> data converter -> mixed-signal IC -> semiconductor. Compared with delta-sigma ADCs, SAR parts offer deterministic latency and single-shot conversions, making them preferred for multiplexed data-acquisition front-ends and control loops. Compared with flash ADCs of the same bit count, SAR parts consume far less power and silicon area. Key features include 300 ksps maximum sampling rate (the 5 MHz clocked MAX1084 variant shares the same datasheet and pin-out at 400 ksps), 10-bit resolution, single-ended analog input, internal 2.5V reference (±1.5% initial accuracy), SPI/QSPI/MICROWIRE-compatible serial interface, 2.5 mA supply current at full speed, and automatic power-down between conversions. The 8-pin SOIC package provides a small footprint suitable for space-constrained industrial and instrumentation designs. The MAX1085 uses a charge-redistribution DAC array with an inherent sample-and-hold front-end, allowing the analog input to settle during acquisition without an external buffer. The internal reference eliminates the need for an external reference IC, reducing BOM cost and PCB area, while still offering ±1.5% initial accuracy suitable for general-purpose 10-bit measurement. Typical applications include portable data logging, pen-digitizer digitizing tablets, portable battery-powered instruments, isolated industrial 4-20 mA sensor digitizers, and general-purpose single-channel data acquisition. The MAX1085A grade offers specified AC electrical characteristics, while the MAX1085B grade offers slightly tighter linearity; the suffix "C" denotes the commercial 0 °C to +70 °C temperature range and "SA" denotes the 8-pin SOIC package. When designing with the MAX1085ACSA+, place a 0.1 µF bypass capacitor within 5 mm of the AVDD pin and keep the analog input traces short and guarded. The serial interface uses SCLK, DIN, DOUT, and active-low CS — tie DIN high when reading conversions only, or hardwire it for hardware-mode operation.

見積もり お問い合わせ
MAX1085ACSA+T - 400ksps 10-Bit Serial ADC | Maxim Integrated
MAX1085ACSA+T

MAX1085ACSA+T - 400ksps 10-Bit Serial ADC | Maxim Integrated

The Maxim Integrated MAX1085ACSA+T is a 10-bit, 400ksps (max), single-supply, low-power, successive-approximation analog-to-digital converter (SAR ADC) with an internal +2.5V reference and serial (SPI/QSPI/MICROWIRE-compatible) interface, packaged in an 8-pin SOIC. It accepts a single analog input channel and combines a high-bandwidth track/hold, an internal reference, and low-power operation in a compact 8-pin SO footprint, targeting portable and remote-sensor data-acquisition applications. A SAR ADC is a type of analog-to-digital converter that uses a successive-approximation register to perform a binary search across an internal resistive ladder (or charge-redistribution capacitor array), producing one bit per clock cycle. SAR ADCs are valued for their deterministic latency (one conversion = N clock cycles), excellent DC linearity, intrinsic anti-alias filtering (no SHA in the feedback path of a sigma-delta), and low power consumption compared to flash or pipelined architectures. The MAX1085ACSA+T sits in the data-acquisition IC -> ADC -> SAR ADC -> 10-bit single-channel ADC -> precision signal-chain IC taxonomy, often used as a successor to legacy 12-bit pin-compatible parts like the MAX1242/MAX1243 when higher throughput is needed. Key features include a maximum sampling rate of 400ksps (MAX1085) versus 300ksps (MAX1084), an internal +2.5V reference (eliminating external reference components and saving PCB area), a single +2.7V to +5.5V analog supply, a low-power shutdown mode that drops supply current to under 1µA between conversions, an SPI/QSPI/MICROWIRE-compatible serial interface, and an 8-pin SOIC package rated for the 0°C to +70°C commercial temperature range (the +T suffix denotes tape-and-reel packaging). The MAX1085 uses a charge-redistribution SAR architecture with an integrated input track/hold, providing 10-bit no-missing-code performance, low integral nonlinearity (INL), and low differential nonlinearity (DNL). The internal reference is factory-trimmed, eliminating external reference noise and drift. The serial interface shifts out conversion results MSB-first, simplifying connection to microcontrollers, DSPs, and FPGA signal-chain front ends. Typical applications include portable data loggers, remote sensor digitizers (strain gauges, thermocouples with amplification), handheld instrumentation, pen-tablet digitizers, and battery-powered medical or industrial monitoring nodes. The low shutdown current makes it well suited to duty-cycled sampling on battery rails. When designing with this device, observe the analog input range relative to VDD (the input cannot exceed VDD + 0.3V), place a 0.1µF bypass capacitor close to VDD, and follow the serial-interface timing diagram exactly. The MAX1085ACSA+T is a drop-in functional equivalent of the MAX1085BCSA+T (the B-grade offers tighter linearity specifications but shares the same 8-pin SO footprint) and the MAX1084ACSA+T (lower 300ksps throughput, same footprint).

見積もり お問い合わせ
MAX108CHC-B50105 - 1.5Gsps 8-Bit ADC with T/H, PECL | Maxim
MAX108CHC-B50105

MAX108CHC-B50105 - 1.5Gsps 8-Bit ADC with T/H, PECL | Maxim

The Maxim Integrated MAX108CHC-B50105 is a PECL-compatible 8-bit ultra-high-speed analog-to-digital converter (ADC) that samples at 1.5 Gsps with an analog input bandwidth of 2.2 GHz. Housed in a 192-ball LBGA (chip-scale BGA) package, it integrates a high-performance track-and-hold (T/H) amplifier and a flash quantizer on a single monolithic die fabricated on Maxim's proprietary advanced GST-2 bipolar process. An 8-bit ADC (analog-to-digital converter) is a data-conversion integrated circuit that translates a continuous-time analog signal into an 8-bit digital code at a specified sample rate. High-speed 8-bit ADCs sit in the broader data-converter hierarchy (ADC > data converter > mixed-signal IC > semiconductor) and are typically used to digitize fast transient or RF signals where GHz-class analog bandwidth and multi-hundred-MHz sampling are required. The MAX108's flash architecture means conversion happens in a single clock cycle, making it one of the fastest ADC topologies available. Key specifications include 1.5 Gsps minimum sample rate, 2.2 GHz full-power input bandwidth, PECL (positive emitter-coupled logic) compatible digital outputs for low-jitter interfacing with FPGAs or high-speed ASICs, and integrated track-and-hold that eliminates the need for an external high-bandwidth sampler. The B-grade -B50105 suffix denotes the commercial temperature grade and the B50105 characterization/test option. The MAX108 uses an innovative differential flash architecture with on-chip calibration, providing low integral nonlinearity and aperture jitter. The integrated T/H holds the analog input stable during conversion, eliminating code-dependent aperture errors that plague many simpler flash designs. The internal PECL drivers deliver well-defined edges into 50 ohm loads, simplifying interface to high-speed FPGAs and demultiplexer ASICs. Typical applications include digital oscilloscopes, radar signal processing, direct RF digitization in software-defined radio, broadband test and measurement instrumentation, and high-energy physics data acquisition. The 2.2 GHz analog bandwidth makes the part suitable for undersampling IF signals as well as direct baseband sampling. When designing with the MAX108, use controlled-impedance differential signal traces for the analog inputs and matched-length PECL traces for the digital outputs to preserve the device's 1.5 Gsps performance. Decouple each supply pin with a separate 0.1 uF ceramic capacitor placed as close as possible to the BGA ball, and provide an external low-jitter PECL clock source meeting the device's aperture-jitter budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping procurement and design engineers shorten evaluation cycles for this specialty ultra-high-speed ADC.

見積もり お問い合わせ
MAX108CHC-D - 1.5Gsps 8-Bit Ultra-High-Speed ADC ESBGA-192 | Maxim
MAX108CHC-D

MAX108CHC-D - 1.5Gsps 8-Bit Ultra-High-Speed ADC ESBGA-192 | Maxim

The MAX108CHC-D from Maxim Integrated (now part of Analog Devices) is a PECL-compatible, 1.5Gsps, 8-bit ultra-high-speed analog-to-digital converter that enables accurate digitizing of analog signals with analog input bandwidths to 2.2 GHz. Housed in a 25 mm x 25 mm, 192-contact Enhanced Super Ball-Grid Array (ESBGA), the part is specified over the commercial 0C to +70C temperature range and is sampled at 1.5 billion samples per second. An ADC (analog-to-digital converter) is a semiconductor device that samples a continuous-time analog signal and quantizes each sample into a finite-resolution binary code, forming the critical bridge between the analog RF/IF front end and the digital signal processing back end. Within the converter family tree, the MAX108 belongs to flash ADC architecture -> high-speed ADC -> data converter -> signal chain IC. Flash ADCs use paralleled comparators to deliver single-cycle conversion, achieving the highest sampling rates available in monolithic silicon. Key features include ±0.25 LSB INL and DNL linearity, 7.5 effective bits at fIN = 750 MHz (Nyquist frequency), 50-ohm differential analog inputs, a PECL-compatible digital output interface, and an on-chip track-and-hold amplifier rated to 2.2 GHz full-power bandwidth. The device is fabricated on Maxim's proprietary GST-2 advanced bipolar process, allowing the track-and-hold and quantizer to coexist on a single monolithic die at multi-GHz analog speeds. The architecture pairs an innovative 2.2 GHz input T/H with an internally-latched flash quantizer core, which minimizes aperture uncertainty and eliminates the need for an external high-bandwidth sample-and-hold. This integrated approach simplifies board design, reduces component count, and shortens critical analog paths on the PCB—key for capturing repetitive single-shot events at sub-nanosecond timing accuracy. Typical applications include digital oscilloscopes, wideband test and measurement instrumentation, radar and EW (electronic warfare) IF digitizers, high-end spectrum analyzer capture front-ends, satellite communication receivers, and medical imaging systems such as ultrasound beamformers that require high analog bandwidth with moderate resolution. When designing with this device, note that the 192-ball ESBGA requires controlled-impedance PCB stackup, laser-via escape routing, and a solid ground/power plane beneath the die to deliver the rated 1.5 Gsps performance. Decoupling must include a ferrite bead plus 0.1uF/10uF/47uF capacitance placed within 5 mm of each supply pin to suppress switching noise from the PECL output drivers. This page synthesizes distributor pricing, drop-in alternatives, pin-out guidance, and practical PCB layout notes not found aggregated in the standalone datasheet, helping engineers shorten evaluation cycles for high-speed ADC prototyping.

見積もり お問い合わせ
MAX1090BEEI - 400ksps 8/4-Ch 10-Bit SAR ADC | Maxim Integrated
MAX1090BEEI

MAX1090BEEI - 400ksps 8/4-Ch 10-Bit SAR ADC | Maxim Integrated

The Maxim Integrated MAX1090BEEI is a 400 ksps, +5V, 8-/4-channel, 10-bit analog-to-digital converter (ADC) with a built-in +2.5V reference and a high-speed byte-wide parallel interface, housed in a 28-pin QSOP package. It combines a successive-approximation register (SAR) architecture with automatic power-down, 2 µs wake-up, an on-chip clock, and an integrated +2.5V reference, delivering up to 400,000 samples per second across 8 single-ended or 4 differential analog input channels. An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes. SAR (Successive Approximation Register) ADCs use a binary-search algorithm with an internal DAC and comparator, offering an excellent trade-off between speed, accuracy, and power consumption for multi-channel data-acquisition systems. Within the broader taxonomy, the MAX1090BEEI belongs to successive-approximation ADCs -> data converters -> mixed-signal ICs -> signal chain -> semiconductor ICs. Key features include 400 ksps maximum sampling rate, 10-bit resolution, 8 single-ended or 4 differential input channels, an integrated +2.5V reference (4.0 V/V input range when using internal reference with 5 V supply), automatic hardware power-down between conversions, parallel-architecture start/stop control, and a high-speed byte-wide parallel output bus. The MAX1090 is the 8-channel variant in the 28-pin QSOP; the MAX1092 is the 4-channel variant in the 24-pin QSOP. The SAR core uses a charge-redistribution DAC with a precision comparator, and the integrated +2.5V reference eliminates the need for an external reference IC. The on-chip T/H (track-and-hold) supports input bandwidths suitable for multiplexed multi-channel acquisition, while the parallel interface simplifies connection to microcontrollers, DSPs, and FPGAs without requiring a serial-clock generator. Typical applications include industrial process-control and data-acquisition systems, portable instrumentation and battery-powered data loggers, medical instruments and patient monitors, multichannel sensor interfaces (temperature, pressure, strain), and automotive telemetry subsystems. The wide analog input range and parallel output are well matched to legacy 8-bit/16-bit MCU buses. When designing with this device, note that the MAX1090BEEI has been obsoleted (no longer manufactured); stock exists at authorized distributors but is finite. Designers should validate lifecycle status before committing to new designs. Refer to the manufacturer datasheet for full pinout, timing diagrams, and reference decoupling recommendations.

見積もり お問い合わせ
MAX1091ACEI+T - 250ksps 10-Bit 8-Ch ADC w/ 2.5V Ref | Maxim
MAX1091ACEI+T

MAX1091ACEI+T - 250ksps 10-Bit 8-Ch ADC w/ 2.5V Ref | Maxim

The Maxim Integrated (Analog Devices) MAX1091ACEI+T is a 250 ksps, low-power, 10-bit, 8/4-channel analog-to-digital converter (ADC) with an on-chip +2.5V reference and a high-speed byte-wide parallel interface, housed in a 28-pin QSOP package. The device operates from a single +3V supply, features automatic power-down between conversions, and wakes up in 2 us, making it suitable for power-conscious multi-channel data-acquisition systems. The internal 2.5V reference eliminates the need for an external reference IC in typical applications. A successive-approximation register (SAR) ADC is a converter architecture that digitizes an analog input by performing a binary search through an internal precision DAC over one or more clock cycles per conversion. SAR ADCs are valued for their deterministic latency, low power consumption, no pipeline delay, and strong AC performance at moderate sample rates - characteristics that position them between flash converters (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, slower). The MAX1091 belongs to the broader category of data converters / signal conditioning ICs within the analog semiconductor family. Its 8 single-ended or 4 pseudo-differential input channels, byte-wide parallel output, and integrated reference make it a complete system-level analog front-end for embedded designs. Key features include 8 analog input channels (configurable as 4 pseudo-differential pairs), a +2.5V internal reference, automatic power-down with 2 us wake-up, an internal conversion clock, and a high-speed byte-wide parallel digital interface. The +3V single-supply operation simplifies power tree design in 3.3V systems, and the auto-power-down function dramatically reduces average current draw in low-duty-cycle applications such as battery-powered instrumentation. The MAX1091 uses a classic SAR core with a sample-and-hold front end configured as MUX-S/H-ADC with a 1:1 input-to-ADC ratio. The high-speed parallel interface allows direct connection to microcontrollers, DSPs, or FPGAs without glue logic, while the internal reference removes a typical external component and PCB area. The 28-pin QSOP package balances compactness with hand-solder-friendly lead pitch, supporting both high-density and prototype builds. Typical applications include portable data loggers, multi-channel sensor interfaces (temperature, pressure, strain), industrial process control, patient monitors and point-of-care diagnostics, and optical encoders. The combination of 10-bit resolution and 250 ksps throughput is well-matched to these mid-bandwidth, multi-channel systems where deterministic conversion timing is important. When designing with the MAX1091, ensure that the supply decoupling network (typically 0.1 uF ceramic in parallel with 4.7 uF bulk) is placed within a few millimetres of the AVDD and DVDD pins. Use the internal reference (REF bypassed with 0.1 uF) unless absolute accuracy below +/-1 LSB is required - in that case, drive REF with an external low-drift reference and account for that reference's settling behavior at full sample rate. This page consolidates distributor pricing, parametric specifications, drop-in alternatives, and PCB design guidance not found in the standalone datasheet, enabling faster part selection and qualification.

見積もり お問い合わせ
MAX1091BCEI+T - 250ksps 10-Bit 8-Ch ADC | Maxim Integrated | QSOP-28
MAX1091BCEI+T

MAX1091BCEI+T - 250ksps 10-Bit 8-Ch ADC | Maxim Integrated | QSOP-28

The Maxim Integrated (Analog Devices) MAX1091BCEI+T is a low-power, 10-bit, 250 ksps successive-approximation analog-to-digital converter (ADC) with 4 or 8 input channels, an internal +2.5 V reference, and a high-speed parallel interface, housed in a 28-pin SSOP/QSOP package. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that samples continuous analog voltage signals and encodes them into discrete digital codes for use by microcontrollers, DSPs, or processors. Successive-approximation register (SAR) ADCs like the MAX1091BCEI+T sit in the broader data-converter taxonomy between lower-speed delta-sigma and higher-speed flash architectures, offering a balanced trade-off of speed, accuracy, and power consumption. They are widely used in industrial control, instrumentation, motor control, and portable battery-powered monitoring systems where mid-range sampling rates (10 ksps to 1 Msps) are sufficient. Key features of the MAX1091BCEI+T include 250 ksps sampling rate across 8 single-ended or 4 differential input channels, an internal +2.5 V reference (eliminating the need for an external reference chip), automatic power-down between conversions with 2 microseconds wake-up time, an on-chip clock, and a byte-wide parallel digital interface. The architecture integrates a track-and-hold amplifier ahead of the SAR core so the input remains stable during the conversion cycle, allowing accurate acquisition of multiplexed channels at full speed. From an electrical perspective, the device operates from a single +3 V supply, draws only a few milliamps during active conversion, and reduces to microamp-level current in power-down mode. This makes it well suited to battery-powered or power-budgeted embedded designs. The internal +2.5 V reference typically offers ±25 ppm/°C temperature drift or better, removing the BOM cost of an external shunt reference and the associated board area in space-constrained layouts. Typical applications include multi-channel data-acquisition front ends in industrial PLCs, process-control sensor read panels, handheld digital multimeters, motor-current monitoring in variable-frequency drives, and portable medical monitoring instrumentation. The combination of selectable 4-/8-channel input MUX, internal reference, and parallel interface reduces external component count, accelerating design-in versus discrete ADC + op-amp + reference chains. When designing with this part, ensure the digital interface signals are routed away from analog inputs to minimize digital-to-analog crosstalk. Decouple AVDN and DVDD separately with 0.1 µF ceramic caps close to the pins. The reference decoupling capacitor value is given in the Maxim datasheet and must not be omitted, since it sets reference settling bandwidth. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the Maxim datasheet alone, giving an engineer a single reference for selection, sourcing, and PCB integration of the MAX1091BCEI+T.

見積もり お問い合わせ