集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MAX174AEPI+ - 12-Bit SAR ADC, 28-PDIP, BiCMOS | Maxim Integrated
MAX174AEPI+

MAX174AEPI+ - 12-Bit SAR ADC, 28-PDIP, BiCMOS | Maxim Integrated

The Maxim Integrated MAX174AEPI+ is a complete 12-bit analog-to-digital converter (ADC) that combines a successive-approximation register (SAR) architecture, an on-chip clock, a buried-zener voltage reference, and a digital interface in a single 28-pin PDIP through-hole package. The device accepts one analog input channel and provides a parallel word-access output, suiting it to data-acquisition front ends where an external microcontroller or DSP must read conversion results in a single bus cycle. A SAR ADC is a type of analog-to-digital converter that uses a binary-search algorithm implemented with a charge-redistribution DAC to resolve the input voltage against a precision reference, producing one digital code per conversion at low latency. SAR ADCs sit within the broader hierarchy of analog-to-digital converters (ADCs) -> data converters -> mixed-signal ICs -> integrated circuits, and are valued for their deterministic latency, low power, and ease of use compared to delta-sigma or pipeline architectures. Key features of the MAX174AEPI+ include a 12-bit resolution, a single analog input, integrated reference, and Maxim's BiCMOS construction that reduces power dissipation roughly three times compared to all-bipolar predecessors such as the AD574A. The converter is specified for industrial temperature grades and ships in a plastic DIP-28 package with through-hole leads. The MAX174 belongs to Maxim's industry-standard 12-bit ADC family that also includes the MX574A and MX674A variants. All three share the same control-logic footprint and pinout conventions, enabling board-level design reuse when migrating between speed grades or supply-voltage options within the family. The MAX174AEPI+ is the +5 V operation variant of the MAX174 family. Typical applications include industrial process control, instrumentation, data loggers, and any system requiring a low-power, complete 12-bit ADC with a parallel interface. The integrated reference and clock reduce external component count, which is advantageous in legacy designs and replacement scenarios. When designing with this part, ensure the analog input signal is properly buffered and that the +5 V supply is decoupled with a 10 uF tantalum plus 0.1 uF ceramic combination near the device. The internal reference stability is sufficient for 12-bit accuracy but cannot source heavy external loads. This page synthesizes distributor pricing, parametric comparison with same-family Maxim parts, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a single reference for the MAX174AEPI+.

見積もり お問い合わせ
MAX174BC/D-C10306 - 12-Bit 8μs SAR ADC Die | Maxim Integrated
MAX174BC/D-C10306

MAX174BC/D-C10306 - 12-Bit 8μs SAR ADC Die | Maxim Integrated

The Analog Devices / Maxim Integrated MAX174BC/D-C10306 is a complete 12-bit analog-to-digital converter (ADC) supplied as a bare die (wafer / chip form), implementing successive-approximation (SAR) conversion with an 8 μs maximum conversion time and on-chip clock, buried-zener voltage reference, and digital interface logic. The MAX174 family combines the precision of a 12-bit ADC with high throughput and low power consumption, integrating all analog and digital functions onto a single monolithic die. Conversion rates reach up to 125 kSPS at full 12-bit resolution. An ADC (Analog-to-Digital Converter) is a data-acquisition component that converts a continuous analog input voltage into a discrete binary code suitable for digital processing. The SAR (Successive Approximation Register) architecture uses an internal DAC and comparator to resolve one bit per clock cycle, achieving an excellent trade-off between speed, accuracy, and power consumption. Positioned in the broader signal-chain taxonomy, ADCs belong to the data-converter family (ADC/DAC), sit inside the signal-conditioning hierarchy, and ultimately fall under the broader category of mixed-signal semiconductor ICs. Modern SAR ADCs dominate applications in industrial control, instrumentation, and embedded data acquisition. The MAX174 draws only 175 mW from a +5 V and ±12 V or ±15 V analog supply set, supports unipolar or bipolar input ranges (0 V to +10 V, 0 V to +20 V, ±5 V, ±10 V), and provides three-state output latches for direct bus interfacing to 8-, 12-, or 16-bit microprocessors. A precision buried-zener reference delivers ±10 V or 0 V to +10 V output options. The die-level packaging suits designers who require chip-on-board (CoB) or hybrid assembly for space-constrained or ruggedized systems. Typical applications span industrial process-control loops, multi-channel data-acquisition front ends, instrumentation front panels, precision sensor signal conditioning, and medical imaging subsystems. Because the MAX174 integrates clock, reference, and output latches, designers can replace multi-chip ADC solutions with a single die, shrinking BOM count and PCB footprint in harsh-environment or miniaturized assemblies. When designing with the bare-die MAX174BC/D-C10306, pay careful attention to die-handling protocols and ESD safeguards — die-level packaging requires wire bonding or flip-chip attach rather than standard SMT placement. The three-state output bus and MODE pin simplify μP interface design, allowing direct connection to 8-bit data buses without external latches. Pricing references in this page are quoted as of 2026-10-15.

見積もり お問い合わせ
MAX174BCPI - 12-Bit 8µs SAR ADC with Reference | Maxim Integrated | PDIP-28
MAX174BCPI

MAX174BCPI - 12-Bit 8µs SAR ADC with Reference | Maxim Integrated | PDIP-28

The Maxim Integrated MAX174BCPI is an industry-standard, complete 12-bit analog-to-digital converter (ADC) in a 28-pin PDIP package, featuring an on-chip voltage reference, internal clock, and 8µs maximum conversion time. It is a successive-approximation register (SAR) ADC with one analog input channel, a parallel digital interface, and bipolar input ranges of ±5V, ±10V, 0-10V, and 0-15V. The integrated 10V buried-zener reference and clock oscillator eliminate the need for external components, simplifying precision data-acquisition designs in industrial instrumentation. A SAR ADC is a successive-approximation-register analog-to-digital converter, which is a subtype of ADC that uses a binary-search algorithm against an internal DAC to digitize an analog input in N clock cycles for N bits of resolution. SAR ADCs occupy the middle ground in the ADC taxonomy: they offer higher speed than integrating or delta-sigma converters but lower speed than flash ADCs, while delivering excellent DC accuracy, low latency, and low power consumption without the switching noise inherent to delta-sigma architectures. The MAX174 belongs to the broader category of data-acquisition ICs, which sit within signal-chain components and ultimately within the power-management-and-analog IC family of semiconductors. Key features include 12-bit resolution with no missing codes, ±0.5 LSB maximum integral nonlinearity (INL), and a track/hold amplifier capable of digitizing signals up to its Nyquist bandwidth. The device operates from ±12V or ±15V supplies, drawing typically 80 mW, with a power-down mode that reduces consumption to under 5 mW between conversions. The 8µs conversion time translates to a 125 kHz throughput, suitable for high-speed industrial control loops and multi-channel multiplexing systems. The internal architecture uses a capacitive-charge-redistribution DAC for the SAR loop, a precision buried-zener reference laser-trimmed for low drift, and a self-biasing bipolar front end that accepts true bipolar input signals without external signal conditioning. The device includes control logic that allows direct connection to microprocessors via the 12-bit parallel bus, with standard CS, RD, and BUSY handshake signals compatible with 8080-family processor interfaces. Typical applications include industrial process-control data acquisition, digital panel meters, instrumentation amplifiers digitizing strain-gauge signals, multi-channel data-logging multiplexed systems, and benchtop test-and-measurement equipment. The wide bipolar input range makes it particularly attractive in legacy 12-bit data-acquisition boards where direct connection to ±10V transducer outputs is required without external resistor attenuators or level-shift circuits. When designing with this device, ensure the power-supply bypass network uses 10 µF tantalum in parallel with 0.1 µF ceramic at each supply pin; failure to provide adequate decoupling degrades the reference noise and INL. The analog input must be protected with an external op-amp buffer or low-impedance driving source to avoid kick-back from the internal capacitive DAC, which would otherwise introduce settling errors at the rated 8 µs conversion speed. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not aggregated on the manufacturer datasheet, providing an engineer-ready summary for sourcing and design-in decisions.

見積もり お問い合わせ
MAX174BCWI+ - 12-Bit 125 kSPS Complete ADC | Maxim Integrated
MAX174BCWI+

MAX174BCWI+ - 12-Bit 125 kSPS Complete ADC | Maxim Integrated

The Maxim Integrated (now Analog Devices) MAX174BCWI+ is an industry-standard, complete 12-bit successive-approximation analog-to-digital converter (SAR ADC) that combines high speed, low power consumption, and on-chip clock and voltage reference in a single IC. It samples at up to 125 kSPS, accepts a 0 V to +10 V or 0 V to +20 V unipolar analog input range, and offers bipolar ranges of ±5 V and ±10 V when configured for true bipolar operation. Housed in a wide-body 28-pin SOIC package, the MAX174BCWI+ is a member of Maxim's classic MAX174/MX574A/MX674A family that has shipped in high-volume instrumentation designs since the 1980s. Key specifications include 12-bit resolution with no missing codes, a 0 V to +10 V or 0 V to +20 V input range (jumper or strap selectable), a 10 V on-chip buried-zener reference (TrimDAC-compatible, ±0.3% accuracy grade B), a parallel microprocessor interface, and a low supply requirement of +5 V plus optionally ±12 V to ±15 V for analog inputs. Conversion time is 8 µs at full throughput, with three interface modes for tying to 8-bit, 12-bit, or 16-bit data buses. An SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a widely used ADC architecture that uses a binary search algorithm to resolve the input voltage one bit per clock cycle, achieving an excellent trade-off between speed, resolution, and power consumption. SAR ADCs sit at the second tier of the data-converter hierarchy: faster than integrating ADCs, slower than flash or pipeline ADCs, but offering very high DC accuracy and low latency. They occupy a key role in the broader power management and signal-conditioning IC family, alongside DACs, references, and multiplexers. The MAX174BCWI+ uses Maxim's BiCMOS construction, which reduces power dissipation relative to older bipolar-only designs. The internal reference and clock reduce external component count to a bare minimum: a handful of bypass capacitors and decoupling at the supply pins are sufficient for most applications. The device can also be operated in ROM mode for reduced-microcontroller designs. Typical applications include process-control data acquisition boards, instrumentation front-ends, motor-control feedback loops, medical monitoring equipment, and any high-accuracy industrial measurement requiring an easy-to-interface 12-bit ADC with built-in reference. The wide analog input range (up to ±10 V bipolar) makes the part especially attractive in legacy industrial systems that use ±10 V or 4 mA to 20 mA signaling. Pairing the MAX174BCWI+ with a precision op-amp front-end (such as the MAX4250) and an instrumentation amp (such as the MAX4194) builds a complete 12-bit analog input module. When designing with the MAX174BCWI+, observe the Analog Devices datasheet supply-decoupling recommendation: place 10 µF tantalum and 0.1 µF ceramic bypass capacitors as close to the supply pins as possible. Re-calibrate the internal reference at first startup using the TrimDAC inputs if ±1 LSB absolute accuracy is required, especially at the limits of the operating temperature range. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design notes that complement the manufacturer datasheet - ideal for engineers evaluating the MAX174BCWI+ for new designs or as a drop-in for an end-of-life replacement in an existing board.

見積もり お問い合わせ
MAX174BEPI - 12-Bit Industry-Standard ADC, 28-PDIP | Maxim Integrated
MAX174BEPI

MAX174BEPI - 12-Bit Industry-Standard ADC, 28-PDIP | Maxim Integrated

The Maxim Integrated MAX174BEPI is an industry-standard 12-bit successive-approximation analog-to-digital converter (SAR ADC) with an integrated reference, on-chip clock, and tri-state output buffers, housed in a 28-pin plastic DIP (PDIP-28) package. It accepts input ranges of 0 to +10V or 0 to +20V unipolar and +/-5V or +/-10V bipolar through pin strapping, and supports standard 8-, 12-, and 16-bit microprocessor bus interfaces. According to the MAX174 datasheet family, this part provides 12-bit resolution with no missing codes and is part of the MAX174/MX574A/MX674A ADC family. An ADC (analog-to-digital converter) is a data converter that translates a continuous analog voltage or current into a discrete digital code, enabling microprocessors and digital signal processors to acquire real-world signals. Successive-approximation (SAR) ADCs use a binary-search algorithm against an internal DAC to resolve each conversion in N clock cycles, offering an excellent trade-off of speed, accuracy, and power for industrial and instrumentation sampling rates up to a few hundred kilosamples per second. Within the converter hierarchy, SAR ADCs sit between flash converters (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, slowest); the MAX174 family specifically targets 12-bit industrial measurement. Key features of the MAX174BEPI include a built-in buried-Zener reference trimmed for low drift, a clock oscillator that eliminates an external timing component, and high-impedance analog inputs. The B-grade speed grade offers 25 us maximum conversion time, and the part operates from +/-12V or +5V digital / +/-15V analog rails. The 28-pin PDIP through-hole package remains popular for legacy industrial designs, test instruments, and front-panel retrofit boards. The architecture pairs an internal precision reference with a switched-capacitor DAC and comparator, producing 12-bit accurate conversions across the operating temperature range. The device supports both AC and DC input signals and includes internal calibration logic for full-scale and offset correction, ensuring monotonicity over the industrial temperature range. Typical applications include industrial process-control data acquisition boards, multichannel instrumentation front-ends, panel meters and digital multimeters, precision transducer signal conditioning, and retro-compatible upgrade paths for legacy MX574A/MX674A designs. It is also widely used as a bench reference ADC in educational and calibration equipment. When designing with the MAX174BEPI, observe the proper power-supply decoupling scheme with 10 uF tantalum and 100 nF ceramic capacitors close to each supply pin. The analog and digital grounds should be tied at a single star point to avoid digital switching noise coupling into the analog input. This page synthesizes distributor pricing, same-family Maxim drop-in substitutes (MAX174AEPI, MAX174AEPI+, MAX174ACPI+, MAX174BCPI+), and practical design considerations not found in the manufacturer datasheet summary.

見積もり お問い合わせ
MAX174CCWI+ - 12-Bit 125ksps SAR ADC with 10V Input Range | Maxim Integrated
MAX174CCWI+

MAX174CCWI+ - 12-Bit 125ksps SAR ADC with 10V Input Range | Maxim Integrated

The Maxim Integrated MAX174CCWI+ is a 12-bit successive-approximation analog-to-digital converter (SAR ADC) with a 125 ksps sampling rate and an integrated 4 MHz buried-zener reference, housed in a 28-pin wide-body SOIC package. The converter accepts full-scale analog input ranges of 0 to +10V (unipolar) or ±5V, ±10V (bipolar) when configured with appropriate external scaling resistors, and interfaces to a microprocessor through a unidirectional or bidirectional parallel data bus. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that translates a continuous analog voltage into a discrete digital code, forming the front-end of every digital signal acquisition system. SAR (successive-approximation register) ADCs use a binary-search algorithm with an internal DAC, delivering deterministic latency, low power consumption, and excellent static linearity - making them the standard choice for industrial process control, instrumentation, and multi-channel data-acquisition boards. Key features include 12-bit resolution with no missing codes, ±1 LSB maximum integral nonlinearity (INL), ±0.5 LSB differential nonlinearity (DNL), and a 25 µs typical acquisition time. The MAX174 shares an industry-standard pinout with the MX574A and MX674A, the latter two being 12-bit and 12-bit high-speed variants respectively. An on-chip clock oscillator requires no external crystal, and internal buried-zener reference maintains ±0.05%/week long-term stability. The architecture employs a precision charge-redistribution DAC array together with a low-noise comparator and a successive-approximation register; the input signal is sampled onto a 5 pF acquisition capacitor during the acquisition phase, and conversion proceeds under control of the on-chip oscillator. The MAX174 is offered in commercial (0°C to +70°C, MAX174CCWI) and extended (-40°C to +85°C) grades. Typical applications include industrial process-control loops, multi-channel data-acquisition front ends, panel meters, digital panel instrumentation, and audio spectrum analyzers. Designers frequently choose this part when a complete, ready-to-use 12-bit ADC with an internal reference and 8/16-bit parallel bus simplifies board layout. When designing with the MAX174, calculate the analog input scaling resistors precisely to avoid exceeding the 25 V absolute maximum at any analog input pin, and add 0.1 µF bypass capacitors plus a 10 µF tantalum bulk capacitor to the +VCC and -VSS pins within 7 mm of the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MAX174CEPI - 12-Bit 125ksps ADC | Maxim Integrated / ADI
MAX174CEPI

MAX174CEPI - 12-Bit 125ksps ADC | Maxim Integrated / ADI

The Maxim Integrated MAX174CEPI (now supplied by Analog Devices) is an industry-standard, complete 12-bit analog-to-digital converter (ADC) that combines high speed, low power dissipation, and on-chip clock plus voltage reference in a single 28-pin PDIP (DIP-28, plastic through-hole) package. Built on Maxim's BiCMOS process, it delivers up to 125 ksps conversion rate with a maximum conversion time of 8 microseconds, while consuming only about 150 mW of power - roughly one-third the dissipation of comparable 12-bit ADCs of its era. A successive-approximation ADC (SAR ADC) is one of the most widely used ADC architectures because it provides deterministic, low-latency conversions and excellent DC accuracy. In the hierarchy of data-converter categories, the SAR ADC sits alongside flash, sigma-delta, and pipeline ADCs; compared with sigma-delta, it offers wider bandwidth and lower latency, and compared with flash, it provides much higher resolution at modest cost. The MAX174 sits at the high-speed end of the 12-bit SAR family and is intended for parallel (parallel-byte) microprocessor interfaces. Key features of the MAX174CEPI include pin-strappable analog input ranges of 0 to +10 V or 0 to +20 V unipolar, plus bipolar ranges of ±5 V or ±10 V - covering the full range of industrial process-control signal levels. The on-chip buried-zener reference and internal clock remove the need for external precision components, while a standard microprocessor interface architecture (with separate 8/12/16-bit bus compatibility) simplifies digital hook-up. The device offers three-state output buffers, monotonic performance (no missing codes over the operating range), and a control line that lets the user select 8-bit or full 12-bit conversion. Typical applications include high-speed data-acquisition front ends, industrial process-control input boards, digital signal processing front ends, and audio/speech digitisation. It is also widely used in instrumentation and telemetry equipment where 12-bit resolution and 8 microsecond conversion time are sufficient for the signal bandwidth involved. When designing with this part, observe the standard Maxim bipolar-input conditioning recommendations: bypass all supply pins close to the IC and add a 100 ohm series resistor on the analog input to drive the internal buffer cleanly. Operate from +/-15V and +5V supplies as called out in the datasheet. Because this is a through-hole 28-pin DIP, it suits legacy industrial and instrumentation designs rather than new high-density SMT layouts.

見積もり お問い合わせ
MAX176ACPA - 12-Bit 250ksps Serial ADC, 8-PDIP | Maxim
MAX176ACPA

MAX176ACPA - 12-Bit 250ksps Serial ADC, 8-PDIP | Maxim

The Maxim MAX176ACPA is a 12-bit, 250 ksps, serial-output analog-to-digital converter (ADC) integrated in an 8-pin PDIP package, designed for high-speed data acquisition in industrial process control, instrumentation, and embedded systems. It combines a 0.4 us maximum acquisition-time track-and-hold amplifier, a 3.5 us successive-approximation ADC core, and an on-chip buried-zener voltage reference, delivering complete single-chip conversion functionality with serial interface output. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog signals and converts them into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Within the broader taxonomy, the MAX176ACPA belongs to SAR (Successive Approximation Register) ADCs -> data converters -> signal chain ICs -> mixed-signal semiconductors. SAR ADCs are favored over delta-sigma and pipeline architectures when low latency and deterministic throughput are required, particularly in multiplexed multi-channel systems and servo-loop control applications. Key differentiating features include the 250 ksps guaranteed throughput, 12-bit resolution with no missing codes, an internal buried-zener reference providing low drift and low noise, single +5 V analog supply operation with a -5 V or larger negative reference option for bipolar input ranges, and a 3-wire (SPI/QSPI/MICROWIRE-compatible) serial interface that reduces pin count versus parallel-output ADCs of equivalent speed. Architecture-wise, the MAX176ACPA uses a charge-redistribution switched-capacitor DAC inside the SAR loop. Track-and-hold is implemented as an open-loop input stage that settles to 12-bit accuracy in 0.4 us minimum. The buried-zener reference is factory-trimmed, eliminating the need for external reference components and shrinking the BOM versus ADCs that require external 2.5 V or 5 V references. Typical applications span data acquisition systems, process control front-ends, portable instrumentation, weigh scales, and digital signal processing front-ends where a compact, low-pin-count ADC with internal reference is required. The 8-pin PDIP form factor also supports through-hole prototyping on breadboards and legacy industrial backplanes. Designers should pay attention to input-signal conditioning: the MAX176ACPA accepts a unipolar 0 to +5 V input (with bipolar operation possible using the VEE pin and external driver). Source impedance should be kept below a few hundred ohms to avoid conversion-time errors. Decouple AVDD with a 10 uF tantalum in parallel with a 0.1 uF ceramic placed close to the pin. This page synthesizes current distributor pricing, factory-package drop-in alternatives including the MAX176BCPA and MAX176AMJA, application guidance, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MAX176AEPA - 12-Bit 250ksps SAR ADC with Reference | PDIP-8
MAX176AEPA

MAX176AEPA - 12-Bit 250ksps SAR ADC with Reference | PDIP-8

The Maxim Integrated MAX176AEPA is a 12-bit, 250 ksps successive-approximation analog-to-digital converter (ADC) with an internal track/hold amplifier and buried-zener voltage reference, housed in an 8-pin PDIP package. It operates from a single +5 V supply, draws 4 mA typical operating current, and provides a serial SPI/QSPI/MICROWIRE-compatible data interface that simplifies opto-isolation and board-to-board wiring. The internal 12-bit reference and small external parts count make it a true single-chip data-acquisition solution. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts a continuous analog voltage at its input into a discrete digital code at its output. Within the broader taxonomy, an ADC belongs to data conversion ICs, which sit under mixed-signal ICs and ultimately the semiconductor family. Successive-approximation-register (SAR) ADCs such as the MAX176 use an iterative binary-search algorithm combined with an internal DAC, achieving an excellent trade-off between speed, resolution, and power consumption. The MAX176 specifically integrates a track/hold front-end and a precision reference on-chip, removing the need for an external reference or sample-and-hold circuit. Key specifications include 12-bit resolution (no missing codes), 250 ksps throughput, ±0.5 LSB integral nonlinearityity (INL, max), ±1 LSB differential nonlinearityity (DNL, max), 1.5 µs track/hold acquisition time, 3.5 µs conversion time, and a true bipolar ±5 V or 0–5 V analog input range. The on-chip buried-zener reference provides a low 5 ppm/°C typical temperature drift, eliminating external reference drift in instrumentation designs. The serial interface supports an external clock up to the full conversion rate, enabling easy interface to SPI, QSPI, and MICROWIRE-compatible microcontrollers without glue logic. Typical applications include high-speed data logging, pen-digitizers and digitizing oscilloscopes, industrial process control, sonar/audio signal processing, and battery-powered or remote-sensor instrumentation. Its 4 mA operating current and small 8-pin DIP footprint suit designs where board area and supply drain both matter. When designing with this part, place 0.1 µF ceramic bypass capacitors as close as possible to the supply pin and use a clean analog ground to avoid digital switching noise coupling into the analog input. For systems that already use a higher-resolution SAR ADC, the MAX176 remains a reliable workhorse for legacy and industrial designs. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application guidance and design notes not found in the bare datasheet, including comparisons against the MAX176BCPA+ and MAX176BEPA+ variants.

見積もり お問い合わせ
MAX176AEPA+ - 12-Bit 250ksps Serial ADC with T/H | Maxim Integrated
MAX176AEPA+

MAX176AEPA+ - 12-Bit 250ksps Serial ADC with T/H | Maxim Integrated

The Maxim Integrated MAX176AEPA+ is a 12-bit, 250 ksps serial-output analog-to-digital converter (ADC) with an integrated track-and-hold amplifier and buried-zener voltage reference, housed in an 8-pin PDIP plastic package. It combines a fast 0.4 µs track-and-hold, a 3.5 µs successive-approximation ADC core, and an on-chip reference in a single through-hole IC, simplifying mixed-signal front-end design. Operating from a single +5 V supply (with a -12 V or -15 V supply for VSS in some applications), it dissipates typically under 50 mW, suiting it for industrial process control and instrumentation. An ADC is a data converter that translates a continuous analog input voltage into a discrete digital code. Successive-approximation register (SAR) ADCs such as the MAX176AEPA+ perform the conversion in N clock cycles for an N-bit result, balancing conversion speed against power and silicon area. Compared with flash and pipeline architectures, SAR ADCs offer deterministic latency and low noise at moderate sampling rates, making them the de-facto choice for multiplexed 12-bit industrial and instrumentation front ends where they would otherwise require a separate reference and a discrete sample-and-hold. Key specifications include 12-bit resolution with ±1 LSB (max) linearity, 250 ksps throughput, ±5 V analog input range (unipolar or bipolar with external scaling), and a 0.4 µs track-and-hold acquisition time. The integrated buried-zener reference delivers low drift and low noise, eliminating the need for an external precision reference in many designs. The serial interface reduces pin count and isolates the digital noise from the analog front end, and the device is specified over the -40 °C to +85 °C industrial temperature range. Internally, the MAX176AEPA+ uses a charge-redistribution DAC switched by a thin-film resistor ladder, a high-bandwidth input track-and-hold capable of digitizing fast signals without slew-rate-induced error, and a buried-zener reference biased from the +5 V and -15 V rails for low temperature coefficient. Its serial interface is compatible with standard SPI/QSPI/MICROWIRE microcontrollers, simplifying the digital board-side connection to a single chip-select, clock, and serial-data line. The combination of low aperture delay and a quiet on-chip reference makes the part well-suited to multiplexed data-acquisition channels sharing a single converter. Typical applications include industrial process-control data-acquisition front ends, weigh-scale and strain-gauge instrumentation, portable battery-powered measurement, panel-meter signal conditioning, and closed-loop servo control. It also serves medical instrumentation front ends and sensor-signal digitizers where a precision reference and sample-and-hold are needed in a small through-hole footprint. When designing with the MAX176AEPA+, place the 0.1 µF supply bypass capacitors as close as possible to pins 1, 7, and 8, and provide a low-impedance analog ground return to minimize digital switching noise coupling into the analog input. The +5 V supply should be low-noise, because the reference derives directly from it; for best linearity performance, the negative supply (VSS) should be a clean -12 V to -15 V rail rather than generated locally from the +5 V line. This page consolidates distributor pricing, drop-in same-family alternatives, and PCB design notes that are not collected in a single location on the manufacturer's datasheet, giving engineers a single decision-grade reference for selecting or replacing the MAX176AEPA+.

見積もり お問い合わせ
MAX176BEWE - 12-Bit 250ksps Serial ADC with T/H | Maxim
MAX176BEWE

MAX176BEWE - 12-Bit 250ksps Serial ADC with T/H | Maxim

The Maxim MAX176BEWE is a 12-bit, 250 ksps successive-approximation analog-to-digital converter (ADC) with an integrated track-and-hold amplifier and on-chip buried-zener voltage reference, housed in a 16-pin wide-body SOIC (SO-16W / WSOIC-16) package. According to the manufacturer product page, the device operates from a single +5 V analog supply and a separate +5 V digital supply, draws approximately 50 mW of operating power, and supports a bipolar analog input range of ±5 V when running in bipolar mode. The MAX176 family is recommended for new designs and provides a serial interface compatible with SPI/QSPI/MICROWIRE, which makes it easy to connect to microcontrollers, DSPs, or shift registers without bus contention. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts a continuous analog voltage at its input into a discrete digital code. SAR (Successive Approximation Register) ADCs use a binary-search algorithm to settle one bit per clock cycle, balancing speed against power and area. The MAX176 belongs to the higher-level hierarchy: data converter -> ADC -> SAR ADC -> precision 12-bit data-acquisition IC, and is commonly classified under signal-chain data-acquisition components. Key features include 12-bit resolution with no missing codes, 0.5 LSB integral non-linearity (INL) and ±1 LSB gain error, a 0.4 µs maximum track-and-hold acquisition time, 3.5 µs conversion time, and an internal buried-zener reference that typically holds ±25 ppm/°C drift. The on-chip reference and T/H eliminate most external analog components, so the only external parts needed are supply bypass capacitors and the serial-interface pull-up. Typical applications include data-acquisition front ends for industrial instrumentation, precision sensor signal conditioning (load cells, strain gauges, thermocouple cold-junction compensation), portable or benchtop digital multimeters, audio and vibration analysis, and embedded process-control loops. The 250 ksps throughput is sufficient for these mid-speed measurement channels and far exceeds the needs of most temperature and weigh-scale instruments. When designing with this part, ensure that the analog and digital grounds are tied at a single point (star-ground) and that the 10 µF tantalum plus 0.1 µF ceramic decoupling pair is placed within 10 mm of the supply pins. The shutdown pin reduces supply current to microamp levels between conversions for low-power battery designs, and an external clock or micro-controller serial clock can drive the SCLK input up to 5 MHz. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MAX177CNG+ - 10-Bit 100kSPS SAR ADC, 24-PDIP | Maxim Integrated
MAX177CNG+

MAX177CNG+ - 10-Bit 100kSPS SAR ADC, 24-PDIP | Maxim Integrated

The Maxim Integrated MAX177CNG+ is a 10-bit resolution, 100 ksps (kilosamples per second) successive-approximation-register (SAR) analog-to-digital converter with an integrated sample-and-hold (track-and-hold) amplifier, packaged in a 24-pin PDIP (Plastic DIP) through-hole package. The part operates from a single +5V supply and provides a parallel microprocessor-compatible output interface, making it a classic choice for legacy data acquisition boards, industrial process control front ends, and instrumentation digitizers. A SAR ADC (Successive-Approximation-Register Analog-to-Digital Converter) is a type of Nyquist-rate data converter that uses a binary-search algorithm against an internal precision DAC to determine each digital output code. Within the broader converter hierarchy, the MAX177 sits in the medium-speed precision SAR family, between low-power delta-sigma audio converters and high-speed pipeline/video ADCs. SAR ADCs are favored when deterministic latency, single-shot conversion capability, and low-latency digital readout are required. Key features include 10-bit resolution, a single-ended analog input channel, 100 ksps maximum sampling rate, an internal sample-and-hold, parallel digital output, and a built-in +2.5V reference option that can also be overridden with an external reference. The MAX177CNG+ consumes modest supply current and supports a commercial temperature grade, suiting bench instrumentation, factory automation, and embedded datalogger designs where a through-hole part simplifies prototyping. The MAX177CNG+ uses Maxim's classic CMOS SAR core with charge-redistribution DAC switching, providing excellent DC linearity and low noise at the 100 ksps throughput. The 24-pin PDIP form factor makes the part breadboard-friendly and socket-compatible for educational, replacement, and legacy maintenance applications where surface-mount conversion is not required. Typical applications include single-channel 4-20 mA loop digitizers, transducer signal conditioning outputs, bench-top multimeter front ends, industrial controller analog inputs, and digital oscilloscope scaling/calibration digitizers. The single +5V supply simplifies integration alongside 8051, PIC, and AVR microcontrollers without auxiliary analog rails. When designing with the MAX177CNG+, ensure the analog input driving bandwidth is appropriate for the track-and-hold acquisition time and provide adequate bypassing on VDD and VREF. Add a small RC anti-alias filter ahead of the analog input pin to attenuate out-of-band noise before sampling. This page synthesizes distributor pricing across DigiKey/Mouser/Octopart, drop-in package-compatible alternatives, and practical SAR ADC design notes not consolidated in any single source.

見積もり お問い合わせ
MAX177CWG+ - 10-Bit 100ksps SAR ADC with Track-Hold | Maxim Integrated
MAX177CWG+

MAX177CWG+ - 10-Bit 100ksps SAR ADC with Track-Hold | Maxim Integrated

The Analog Devices / Maxim Integrated MAX177CWG+ is a 10-bit, 100 ksps successive-approximation analog-to-digital converter (SAR ADC) with an integrated track-and-hold amplifier and buried-zener voltage reference, housed in a 24-pin wide-body SOIC package. The device operates from a single +5 V analog supply and a digital supply programmable from +5 V to +15 V, providing flexible digital-interface level shifting for 3 V, 5 V, or 15 V microcontrollers and ASICs. Conversion time is 8.33 microseconds including the track-and-hold acquisition window, achieving a 100 ksample/s throughput from a CMOS analog front-end. A SAR ADC is a successive-approximation-register analog-to-digital converter that uses an internal binary-weighted capacitor DAC and a comparator to step through bit decisions one clock at a time. It belongs to the medium-speed, medium-resolution converter family sitting between flash ADCs (fast but low resolution) and delta-sigma converters (high resolution but slower). SAR ADCs are widely chosen for multiplexed data-acquisition systems, industrial process control, and portable instrumentation because they offer deterministic latency, no pipeline delay, and excellent DC accuracy for both single-shot and sampled measurements. Key features of the MAX177CWG+ include 10-bit resolution with no missing codes, an internal buried-zener reference offering low temperature drift and low broadband noise, an on-chip track-and-hold capable of settling to 0.5 LSB in 8.33 microseconds, and low CMOS power consumption typically in the milliamp range. The parallel data output bus and standard microprocessor interface simplify hookup to legacy microcontrollers and DSPs without requiring serial-port configuration. Typical applications for the MAX177CWG+ span industrial process control loops, multichannel data-acquisition front-ends, weigh scales, panel meters, portable instrumentation, and digital sensor readouts where bipolar-input signal conditioning and single-supply 5 V operation simplify the analog signal chain. When designing with this part, ensure the analog input signal stays within the input common-mode range of the track-and-hold amplifier and decouple AVDD and DVDD with separate 0.1 microfarat ceramic bypass capacitors placed close to the supply pins. This page synthesizes distributor inventory, drop-in same-family alternatives, and practical layout guidance that goes beyond the manufacturer datasheet headline specifications.

見積もり お問い合わせ
MAX178AENG+ - 12-Bit 17ksps Calibrated SAR ADC | Maxim Integrated
MAX178AENG+

MAX178AENG+ - 12-Bit 17ksps Calibrated SAR ADC | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX178AENG+ is a calibrated 12-bit analog-to-digital converter (ADC) with a successive-approximation register (SAR) architecture, integrated track-and-hold amplifier, on-chip precision voltage reference, and an internal conversion clock, delivered in a 24-pin plastic DIP (N-24) through-hole package. Key headline specifications include 12-bit resolution, 17 ksps sampling rate, 5.25 V maximum analog input range, and an internal laser-trimmed reference with on-the-fly auto-zero calibration that keeps zero errors below 100 uV. An SAR ADC (successive-approximation-register analog-to-digital converter) is a class of data converter that resolves a binary output one bit per internal clock cycle by comparing the sampled input against a precision DAC. SAR ADCs sit in the broader taxonomy of data-acquisition ICs: ADC -> data converter -> data acquisition -> signal chain -> analog/mixed-signal IC -> semiconductor. The MAX178 belongs to the precision, low-to-medium speed SAR family, valued for deterministic latency and intrinsic alias-free sampling without the latency of delta-sigma converters. Key features include a complete on-chip signal chain (T/H, reference, clock) so that no external reference, sample capacitor, or ADC timing components are required; an auto-zero cycle performed on every conversion that holds zero error below 100 uV across the full industrial temperature range; pin-selectable analog input ranges of 0 V to +5 V unipolar or ±5 V bipolar; and serial digital output for direct connection to a microcontroller or DSP. Internal calibration maintains true 12-bit performance from -40 C to +85 C with no external adjustments. The MAX178AENG+ uses a charge-redistribution DAC array trimmed at the factory against an on-chip buried-zener bandgap reference. The integrated track-and-hold has an aperture compatible with the 17 ksps conversion rate, and the bipolar/unipolar input range is selected by a single pin. Compared with bare 12-bit ADC cores, the integrated reference and reference design eliminates the most common sources of gain and offset drift in precision instrumentation. Typical applications include industrial process control data acquisition, multi-channel 4-20 mA sensor digitizers, portable or panel-mount instrumentation, and digital panel meters. The 5 V unipolar / ±5 V bipolar input ranges match the natural signal swing of many transducers, including strain gauges, thermocouple front-ends after amplification, and 4-20 mA current-loop receivers. When designing with the MAX178AENG+, place a 10 uF tantalum bypass capacitor plus a 0.1 uF ceramic directly at the VDD pin to keep logic-noise currents out of the analog reference. Although the ADC is factory-calibrated, avoid running external digital traces directly under the package to minimize coupled noise into the on-chip reference. This page synthesizes distributor pricing, package-aware drop-in alternatives (all 24-pin PDIP), and practical design notes that complement the manufacturer datasheet.

見積もり お問い合わせ
MAX178AEWG - 12-Bit Calibrated ADC, 17ksps, 24-SOIC | Maxim
MAX178AEWG

MAX178AEWG - 12-Bit Calibrated ADC, 17ksps, 24-SOIC | Maxim

The Maxim Integrated (now part of Analog Devices) MAX178AEWG is a complete, calibrated 12-bit successive-approximation analog-to-digital converter (ADC) integrating a precision bandgap voltage reference, a track-and-hold (T/H) front-end, and an internal conversion clock. Housed in a 24-pin SOIC wide-body package, the device delivers up to 17 ksps conversion rate from a single +5 V analog supply while accommodating bipolar analog inputs via dedicated bipolar-offset pins. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog voltages and encodes them into discrete digital codes. The MAX178 family sits within the SAR (Successive Approximation Register) converter category, which uses an internal capacitive DAC and comparator to converge on the input voltage in N clock cycles. SAR ADCs are favored for their deterministic latency, low power consumption, and excellent DC accuracy - characteristics that place them above integrating converters and flash converters for general-purpose precision measurement. Key features include ±0.5 LSB integral nonlinearity (INL) and ±1 LSB differential nonlinearity (DNL) over the full operating range, an internal 4.096 V reference (Mask A) or external reference option, and an auto-zero cycle on every conversion that reduces zero error to below 100 µV. The device offers three digital-interface modes - 8-bit bus, serial, and stand-alone - selectable via mode pins, and accepts unipolar (0–360 V) or bipolar (±VREF) analog input ranges. The MAX178AEWG carries the commercial 0 °C to +70 °C temperature grade. Architecturally, the MAX178AEWG employs laser-trimmed thin-film resistors and a chopper-stabilized comparator, combined with on-chip calibration logic that corrects gain and linearity errors at power-up. This self-calibration eliminates the need for external trimpots in production, reducing BOM cost and improving long-term drift performance. Throughput is governed by an internal RC oscillator driving the SAR state machine. Typical applications include process-control data acquisition front-ends, weigh-scale signal conditioning, panel-meter and digital-voltmeter designs, temperature-measurement systems (with RTD/thermocouple front-ends), and precision transducer interfaces. The bipolar-input capability simplifies signal paths from bridge sensors and shunt current monitors. When designing with the MAX178AEWG, add 10 µF and 0.1 µF bypass capacitors adjacent to the analog supply pin to keep reference noise below 50 µVrms; a single-point analog ground and a separate digital-ground return are strongly recommended. The internal reference's noise bandwidth scales inversely with the output capacitance, so a larger CREF yields lower noise at the cost of slower power-on settling.

見積もり お問い合わせ
MAX178BCNG - 12-Bit Calibrated ADC with T/H | Maxim Integrated
MAX178BCNG

MAX178BCNG - 12-Bit Calibrated ADC with T/H | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX178BCNG is a complete, calibrated 12-bit analog-to-digital converter (ADC) integrating a precision voltage reference, track-and-hold (T/H) amplifier, and SAR conversion logic in a single 24-pin PDIP through-hole package. It delivers a 17 µs conversion time using the successive-approximation architecture, supports ±5V or +5V/-15V analog input ranges, and consumes only 4.5 mA from a single +5V supply. Internal calibration circuitry and a per-cycle auto-zero routine maintain true 12-bit performance over the full commercial 0°C to +70°C operating temperature range, eliminating the need for external trim adjustments. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data-acquisition IC that uses a binary-search algorithm to convert an analog input voltage into a parallel or serial digital code in N clock cycles for N bits of resolution. SAR ADCs sit within the broader hierarchy of mixed-signal ICs -> data converters -> ADCs, and are valued for their low latency, deterministic throughput, and excellent DC accuracy — making them the dominant choice for multiplexed data-acquisition systems, instrumentation, and process-control front ends. Key features include an internal buried-zener reference (10 ppm/°C typical drift), a ±0.5 LSB integral nonlinearity (INL) maximum specification, zero-error below 100 µV thanks to the per-conversion auto-zero, and a track-and-hold amplifier capable of digitizing full-scale signals up to the Nyquist bandwidth. The MAX178BCNG also exposes a hardware-compatible parallel interface, easing retrofit into designs based on legacy ADC0800-class parts. Architecturally, the MAX178 combines a charge-redistribution CDAC digital section, a bipolar input T/H, a low-noise reference buffer, and on-chip calibration logic that compensates for capacitor-mismatch errors at power-up. The result is no-missing-code 12-bit performance without periodic user recalibration — a significant advantage over older ADCs that required potentiometer trims. Typical applications include industrial process control (4–20 mA loop digitization at the receiver side), multichannel data-acquisition systems in legacy PLCs, weigh-scale and load-cell signal conditioning, benchtop multimeters and panel meters, and precision sensor front-ends for temperature, strain-gauge, and pressure transducers. The wide ±15V input tolerance also suits instrumentation-grade signal chains. A critical design consideration is the input protection network: source impedance should remain below 5 kΩ to avoid IR-drop errors through the ESD diodes, and a 100 nF ceramic bypass on VDD placed within 5 mm of the supply pin is mandatory. The reference output is not designed to drive external loads — buffer it through an external op-amp if multiple ADCs share one reference. This page synthesizes distributor stock, parametric drop-in alternatives within the same Maxim ADC family, and application notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MAX178BCWG - 12-Bit 17ksp/s Precision ADC with T/H and Reference | Maxim Integrated
MAX178BCWG

MAX178BCWG - 12-Bit 17ksp/s Precision ADC with T/H and Reference | Maxim Integrated

The Maxim Integrated MAX178BCWG is a calibrated 12-bit analog-to-digital converter (ADC) with 17 ksps throughput, integrated track-and-hold, on-chip precision voltage reference, and conversion clock, packaged in a 24-pin SOIC (W) wide-body package. It accepts unipolar 0V to 5V analog inputs from a single +5V supply and provides a parallel output interface suitable for direct connection to standard microprocessors. The B temperature grade is specified for the commercial 0C to +70C operating range. A SAR (Successive Approximation Register) ADC is a type of precision data converter that uses a binary-search algorithm to digitize an analog input, producing a single sample per conversion cycle. SAR ADCs are valued for deterministic latency, low power consumption, and the absence of pipeline delay, making them well-suited for multiplexed data-acquisition front ends, industrial process control, and instrumentation. The MAX178BCWG belongs to the integrated ADC IC category within the broader data-converter hierarchy of semiconductors, sitting between standalone ADCs and complete system-on-chip mixed-signal ICs. Key differentiating features of the MAX178BCWG include built-in self-calibration that maintains true 12-bit performance across the full commercial temperature range without external trims, an auto-zero cycle on every conversion that holds zero error to below 100 uV, and a tight integral nonlinearity of typically ±0.5 LSB. The internal 4.096 V reference also frees the user from designing a separate reference circuit, reducing external component count. Architecturally, the part combines a capacitive-charge-distribution DAC, a comparator, a SAR register, and a control logic block. The internal reference uses buried-zener trimming for low drift, and the track-and-hold has 1.5 us acquisition time, supporting the 17 ksps maximum sample rate when clocked from an internal oscillator. Typical applications include precision data-acquisition systems, industrial process control loops, portable instrumentation front ends, weigh-scale and strain-gauge signal conditioning, and embedded sensor readouts. Designers favor the MAX178BCWG where a complete, calibrated ADC subsystem with reference is required in a single SO-24 package. When designing with this part, observe the analog input settling requirements for the printed bands - the input must settle within the first acquisition time - and recommend a 2.2 uF bypass capacitor near VDD to keep reference noise low. Designers should also evaluate using the +5V supply directly; the device does not require a separate analog and digital supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for selection, replacement, and BOM optimization.

見積もり お問い合わせ
MAX181AEPL - 12-Bit 8-Ch 100ksps Data Acquisition IC | Maxim
MAX181AEPL

MAX181AEPL - 12-Bit 8-Ch 100ksps Data Acquisition IC | Maxim

The Maxim Integrated MAX181AEPL is a complete 12-bit, 8-channel Data Acquisition System (DAS) integrating an analog input multiplexer, wide-bandwidth Track-and-Hold (T/H), low-drift buried zener reference, and a flexible 8-/12-bit microprocessor interface into a single 40-pin PDIP through-hole package. The device converts at up to 100 ksps while drawing low supply current, and is configured via the µP bus for unipolar/bipolar input ranges and single-ended/differential channel operation. A Data Acquisition System (DAS) of this type combines an analog front end (multiplexer + T/H + reference) with a successive-approximation ADC and a digital interface. In the broader system taxonomy, a DAS sits below a data logger or DAQ module and above a discrete SAR ADC; it sits inside the larger category of mixed-signal data converter ICs, which themselves fall under signal-chain and data-acquisition semiconductors. By integrating the multiplexer and reference, the MAX181AEPL removes the need to specify, lay out, and calibrate those external sub-blocks. Key features include eight analog input channels (software-configurable single-ended or differential), a 100 ksps throughput rate, ±5 V input range capability (with ±12 V or ±15 V supplies), successive-approximation conversion, software-selectable unipolar or bipolar operation, and a low-power +5 V supply requirement. The internal reference and T/H deliver the bandwidth and accuracy needed to digitize multiplexed signals without inter-channel settling loss. Technically, the MAX181AEPL uses a charge-balancing successive-approximation architecture with an auto-calibrating internal DAC and an input T/H that supports settling to 12-bit accuracy at the full 100 ksps rate. The internal buried-zener reference provides low drift over temperature, eliminating the need for an external reference in most applications. The microprocessor interface supports both 8-bit-wide and 12-bit-wide bus reads, plus standard Read/Convert signals for compatibility with common µP families. Typical applications include industrial process-control front ends, multi-channel instrumentation data loggers, multiplexed sensor signal conditioning, automatic test equipment (ATE) scan digitizers, and embedded 12-bit measurement subsystems. The 8-channel count maps directly to typical sensor-per-channel counts (4-8 analog sensors per board). When designing with the MAX181AEPL, pay attention to analog-input common-mode and overvoltage protection at the multiplexer. The internal reference, while low-drift, requires a properly decoupled supply rail; place 10 µF tantalum and 0.1 µF ceramic bypass capacitors close to the supply pins. For best 12-bit performance in multiplexed mode, include a T/H settling delay before conversion start. This page consolidates distributor stock and pricing, drop-in MAX181-family alternatives, and practical layout/calibration notes that go beyond what the datasheet alone provides.

見積もり お問い合わせ
MAX181BCPL - 12-Bit 8-Ch 100kSPS Data Acquisition | Maxim
MAX181BCPL

MAX181BCPL - 12-Bit 8-Ch 100kSPS Data Acquisition | Maxim

The Maxim Integrated MAX181BCPL is a complete, 8-channel, 12-bit data-acquisition system on a single IC, packaged in a 40-pin PDIP through-hole device. It integrates an 8-channel analog multiplexer, a track/hold amplifier, a successive-approximation analog-to-digital converter (SAR ADC), and digital control logic to deliver 100 kSPS conversion throughput with 12-bit resolution. A data-acquisition IC, often abbreviated DAS or DAQ, is a mixed-signal component that converts multiple real-world analog signals into a digital format that a microcontroller, DSP, or processor can interpret. Within the broader signal-chain hierarchy, the MAX181 sits between front-end sensors/transducers (which produce analog voltages or currents) and a host processor, belonging to the same product family as monolithic ADCs, mixed-signal front-ends, and DAS ICs that combine a MUX, ADC, and reference. Designers choose a fully integrated DAS when they need a small BOM and deterministic timing rather than a discrete mux + external ADC chain. Key differentiating specifications include 100 kSPS throughput, 12-bit resolution with ±1 LSB linearity (max), a track/hold amplifier with sub-microsecond acquisition time, ±5 V input range on selected channels, and a parallel microprocessor interface. The MAX181BCPL operates from ±5 V supplies and supports bipolar input ranges by software configuration, removing the need for external signal conditioning on industrial-level signals. Architecturally, the MAX181 uses a switched-capacitor charge-redistribution SAR core with an internal precision reference, an 8-input analog MUX with break-before-make switching, and an internal clock. The integrated design eliminates most timing skew between channels and removes the layout burden of routing high-frequency analog tracks between a separate MUX and ADC. Typical applications include industrial process-control front ends, multichannel data loggers, portable instrumentation, and embedded analog I/O modules for PLCs. The wide input range, parallel interface, and through-hole PDIP package make it especially attractive for legacy retrofits and for evaluation/prototyping boards where socketed parts simplify rework. When designing with the MAX181BCPL, ensure adequate decoupling on both AVDD and DVDD rails and verify that the input signal source impedance is below the datasheet's recommended maximum to maintain 12-bit accuracy. The through-hole PDIP footprint also simplifies hand-soldered prototypes and field replacements. This page synthesizes distributor pricing for MAX181BCPL, drop-in PDIP-40 alternatives from the same Maxim MAX181 family, and design notes not collected in a single place elsewhere - giving procurement, design, and component-engineering teams a single reference for evaluating the part.

見積もり お問い合わせ
MAX181BCQH-D - 12-Bit 100ksps 6-Channel ADC | Analog Devices
MAX181BCQH-D

MAX181BCQH-D - 12-Bit 100ksps 6-Channel ADC | Analog Devices

The Analog Devices MAX181BCQH-D is a complete, 12-bit, 100ksps, 6-channel data acquisition system built around a successive-approximation ADC with integrated sample/hold and a configurable 6-input analog multiplexer, housed in a 44-pin PLCC (QCCJ) surface-mount package. A successive-approximation register (SAR) analog-to-digital converter (ADC) is a converter architecture that performs one bit per internal clock cycle using a comparator and a switched-capacitor DAC. Compared with flash or pipeline ADCs, SAR ADCs offer an attractive trade-off between sampling rate, resolution, and power consumption for industrial control, instrumentation, and process automation applications. SAR ADCs sit within the broader data-converter hierarchy: ADC -> data converter -> data acquisition IC -> signal-chain component -> semiconductor. Key features of the MAX181BCQH-D include 100 ksps throughput, 12-bit resolution, 6 single-ended or pseudo-differential input channels, an integrated track-and-hold amplifier, software-configurable input ranges, and a parallel microprocessor interface. The architecture is optimized for high-impedance sources, eliminating the need for an external buffer amplifier in many applications. The part is specified over the commercial (0 to +70 °C) temperature grade, and the "-D" suffix denotes a tape-and-reel shipping format per Analog Devices ordering nomenclature. Typical applications include multi-channel analog signal monitoring, transducer interfacing, industrial process control, dataloggers, and embedded instrumentation front-ends. The combination of 6 channels and 100 ksps makes the MAX181BCQH-D well suited for scanning multiple sensor signals sequentially without external multiplexing logic. When designing with this part, attention must be paid to the analog input bandwidth, reference decoupling, and PCB layout for ground isolation between analog and digital domains. The on-chip reference and software-programmable input ranges simplify BOM, but the part must be paired with a low-noise front-end for best DC accuracy.

見積もり お問い合わせ
MAX181CCPL - 12-Bit 8-Ch 100ksps DAS | Maxim Integrated
MAX181CCPL

MAX181CCPL - 12-Bit 8-Ch 100ksps DAS | Maxim Integrated

The Maxim Integrated MAX181CCPL is a complete 8-channel, 12-bit data-acquisition system (DAS) housed in a 40-pin PDIP (Plastic DIP) through-hole package. It integrates a successive-approximation analog-to-digital converter, 8 analog input channels, a track/hold amplifier, and an on-chip reference, delivering up to 100 ksps throughput from a single +5 V supply. The 'CC' grade operates over the commercial 0°C to +70°C temperature range, and the parallel word-access interface simplifies connection to 8-bit and 16-bit microprocessors or microcontrollers. What is a Data-Acquisition System? A DAS is a mixed-signal integrated circuit that combines an analog front end (multiplexer, sample-and-hold, and ADC) with digital control logic in a single chip, replacing the discrete ADC-plus-mux-plus-reference designs of the past. Within the broader converter hierarchy, a DAS sits above stand-alone ADCs and below full system-on-chip solutions; MAX181-class devices belong to the successive-approximation register (SAR) ADC family, prized for deterministic latency and ease of microprocessor interfacing. By integrating the reference and analog switches, Maxim's DAS parts reduce board area, lower BOM cost, and remove the burden of matching discrete analog stages. Key features of the MAX181CCPL include 12-bit resolution with ±½ LSB linearity (typical), an on-chip 5 V reference (with external override option), software-configurable unipolar/bipolar input ranges (0 V to 5 V or ±5 V / ±10 V / 0 V to 10 V depending on external scaling), and a hardware-mode or software-mode channel scan sequencer. The device also offers an interrupt output at end-of-conversion, low power dissipation (~75 mW typical at 100 ksps), and single +5 V operation. The 40-pin PDIP footprint remains compatible with legacy through-hole test fixtures and breadboard prototypes. Architecturally, the MAX181CCPL uses a charge-redistribution successive-approximation ADC core with a capacitive DAC, which provides inherent sample-and-hold action and eliminates the need for an external SHA. The on-chip precision reference is laser-trimmed at the factory, and an external reference pin allows system designers to substitute higher-accuracy or ratiometric references when required. The parallel interface supports either 8-bit (two read cycles) or 16-bit (single read) data transfer, with chip-select and read-strobe handshaking that map directly to 8051, 68HC11, and similar MCU buses. Typical applications include industrial process-control front ends, multi-channel data loggers, instrumentation front panels, and portable test equipment. The 8-channel count suits it for monitoring thermocouple banks, RTD arrays, strain-gauge bridges, and 4 mA to 20 mA current-loop sensors. Designers also use the MAX181CCPL in legacy microprocessor-based factory automation cards where a parallel-bus ADC eliminates the need for an SPI/QSPI peripheral. When designing with the MAX181CCPL, pay attention to analog-input protection: the analog inputs can be damaged by overvoltage transients, so series resistors and clamping diodes networks are recommended for industrial applications. Also, because the part uses a successive-approximation core, the analog input must remain stable during the conversion window (typically 8 µs to 10 µs); if the source impedance is too high, add an external buffer to avoid conversion errors. This page synthesizes distributor pricing, drop-in Maxim Integrated alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MAX181CEQH-D - 12-Bit 100ksps 8-Ch DAS ADC | Maxim Integrated
MAX181CEQH-D

MAX181CEQH-D - 12-Bit 100ksps 8-Ch DAS ADC | Maxim Integrated

The Maxim Integrated MAX181CEQH-D is a complete 12-bit, 100 ksps, 8-channel data-acquisition system (DAS) housed in a 44-pin PLCC (J-Lead, 16.59x16.59 mm) surface-mount package. It integrates an 8-input multiplexer, a high-bandwidth track/hold amplifier, a successive-approximation ADC, plus programmable I/O registers and a parallel microprocessor interface on a single die. The -D suffix indicates the dry-pack shipping option, while the underlying MAX181 silicon operates from a single +5 V supply and a -5 V reference. According to Maxim datasheet summaries, the part delivers 100 ksps throughput with 12-bit resolution and is specified for the industrial temperature grade. A Data Acquisition System (DAS) of this type is a category of mixed-signal IC that combines analog signal conditioning, channel multiplexing, and a single ADC to support multi-channel measurement from a shared converter. The MAX181 belongs to the broader SAR (Successive Approximation Register) ADC family, which trades absolute speed for high resolution (12+ bits), low power consumption, and ease of system integration. Within the data-converter hierarchy, the DAS sits above a bare multiplexer plus ADC pair, reducing board area, timing complexity, and component count versus discrete architectures; this is why older industrial and instrumentation designs relied on it heavily. Differentiating features include 8 single-ended or 4 differential analog inputs selectable through on-chip registers, a software-controlled programmable gain stage, internal clock generation, and a parallel interface that maps cleanly onto 80C31/68HC11, 8088/80186, and similar microcontrollers. The successive-approximation architecture guarantees no missing codes at the 12-bit level and provides low aperture uncertainty that is suitable for multiplexed transducer scanning. Internal registers let the host independently configure input range, channel selection, and conversion-trigger source without external glue logic. The conversion engine uses a charge-redistribution DAC array with a thin-film ladder trimmed at the factory, yielding typical integral nonlinearity of ±0.5 LSB and a track/hold capable of sustaining the 100 ksps rate even on full-scale input transitions. Reference decoupling is single-supply: the device accepts a unipolar or bipolar analog input range tied to VREF; a typical 4.096 V reference supports the part's nominal 0-5 V input span, which matches many transducer bridges, thermocouples, and 4-20 mA current loops once scaling. Internal sequencing reduces CPU overhead - the host initiates one conversion and reads the result on interrupt. Typical applications include industrial process control and SCADA front-ends, multi-channel data loggers, weigh scales and load-cell instrumentation, factory automation analog input modules, automotive sensor interfaces, and medical patient-monitoring front ends. Anywhere a small-form-factor mixed-signal board needs to digitize 4-8 analog channels without paying for a full 16-bit pipeline ADC, the MAX181 series remains a viable solution - especially where component traceability and a single-IC footprint simplify certification. A key design tip: keep the AGND/DGND ground return short and provide a 0.1 µF ceramic bypass capacitor within 5 mm of each supply pin, plus a 10 µF tantalum bulk capacitor on VDD. The 44-PLCC socket footprint allows hand-rework with a PLCC extraction tool - one reason this part is still seen in legacy test fixtures and avionics repair lines. This page synthesizes distributor pricing tiers, parametric drop-in alternatives (including automotive-grade MAX181BCQH-D variants), and practical design notes that supplement the manufacturer datasheet for engineers sourcing legacy Maxim DAS parts.

見積もり お問い合わせ
MAX182BCPI - 12-Bit 4-Ch SAR ADC w/ T/H and Reference | Maxim
MAX182BCPI

MAX182BCPI - 12-Bit 4-Ch SAR ADC w/ T/H and Reference | Maxim

The Maxim Integrated MAX182BCPI is a calibrated, 4-channel, 12-bit successive-approximation analog-to-digital converter (ADC) with an integrated track-and-hold amplifier and a precision on-chip voltage reference, housed in a 28-pin PDIP through-hole package. It delivers up to 17 ksps throughput across 4 single-ended or 2 differential analog input channels, while internal calibration circuitry maintains true 12-bit performance over the full commercial operating temperature range (0C to +70C) without external trims. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that transforms continuous analog voltage signals at its inputs into discrete digital codes at its output, enabling microcontrollers, DSPs, or FPGAs to process real-world sensor signals. Successive-approximation-register (SAR) ADCs use a binary-search algorithm with an internal DAC and comparator to resolve N bits in N clock cycles, trading conversion speed for excellent DC accuracy, low latency, and very low power consumption - making SAR ADCs the dominant topology for industrial process control, instrumentation, and multichannel data-acquisition systems. Key features of the MAX182BCPI include an internal 2.5 V bandgap reference (with a REFADJ pin for external trim), a track-and-hold with 1.5 MHz full-power bandwidth, a parallel microprocessor interface, hard-wired channel sequencing or software-programmable channel selection, and single +5 V supply operation. The part draws approximately 4 mA active supply current and powers down to microamp-level standby between conversions, simplifying battery and portable designs. Internal autocalibration of linearity and offset runs at power-up and on demand via the CAL pin, eliminating periodic user adjustment. Typical applications include multichannel process-control data acquisition boards, portable or rack-mounted industrial instrumentation, sensor-signal conditioning front-ends, and embedded microprocessor analog I/O modules where the integrated reference and track-and-hold reduce external bill-of-materials cost and PCB area compared with discrete ADC + reference designs. When designing with this device, place 0.1 uF ceramic bypass capacitors close to the supply and reference pins, drive analog inputs through low-impedance buffers, and avoid routing digital lines under the analog input traces to preserve 12-bit noise performance.

見積もり お問い合わせ
MAX182BCWI - 12-Bit 4-Ch 17ksps ADC with T/H & Reference | Maxim
MAX182BCWI

MAX182BCWI - 12-Bit 4-Ch 17ksps ADC with T/H & Reference | Maxim

The Maxim Integrated MAX182BCWI is a calibrated 12-bit, 4-channel analog-to-digital converter (ADC) with a track-and-hold amplifier and an internal 4.096V bandgap reference, offered in a 28-pin wide-body SOIC package. It performs successive-approximation conversions at up to 17 ksps across four single-ended or two differential analog input channels, with software-configurable unipolar or bipolar input ranges of 0 to +5V, 0 to +10V, +/-5V, or +/-10V. An ADC (Analog-to-Digital Converter) is a data-acquisition component that translates real-world continuous analog signals into discrete digital codes readable by a microcontroller, DSP, or processor. In the broader signal-chain hierarchy, the ADC sits between analog front-end conditioning (amplifiers, multiplexers, sensors) and digital processing; multi-channel ADCs like the MAX182 integrate channel switching, sample-and-hold, and reference, replacing a discrete implementation that would otherwise require a separate MUX, T/H, and reference IC. The MAX182 series uses successive-approximation register (SAR) architecture, which provides deterministic latency per conversion ideal for multiplexed data-acquisition systems. Key features include 17 ksps throughput, a 4.096V internal reference, software-configurable input ranges, on-chip calibration, a track-and-hold amplifier, and a parallel microprocessor interface. The integrated 4.096V reference simplifies analog input scaling for 0-5V or +/-5V ranges by providing 1 LSB = 1 mV resolution when the inputs are configured for unity-gain operation. Typical applications include industrial process-control data-acquisition systems, multi-loop programmable logic controllers (PLCs), analog I/O cards for PC-based measurement, and precision sensor signal digitisation. Designers select the MAX182 for its combination of integrated reference, multi-channel switching, and parallel interface that simplifies firmware handshaking. When designing with the MAX182BCWI, carefully review the input-channel protection and reference-bypass capacitor selection for noise immunity. Connect AGND and DGND with a low-impedance star ground near the IC, and add a 10 uF tantalum plus 0.1 uF ceramic bypass capacitor directly on the REF pin. This page synthesises distributor availability, drop-in pin-compatible alternatives, and practical PCB design guidance for the MAX182BCWI that are not found in the manufacturer datasheet alone.

見積もり お問い合わせ