集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP
MC9S08PA8VLD

MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP

NXP Semiconductors MC9S08PA8VLD is an 8-bit S08 microcontroller with 8 KB of flash memory, 512 bytes of RAM, a 16-bit timer, an analog-to-digital converter, and an analog comparator. It is offered in a 44-pin LQFP package measuring 10 mm by 10 mm. The distributor product listing identifies a maximum clock frequency of 20 MHz, making the device suitable for compact embedded-control systems that require deterministic peripheral operation and a modest amount of nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and configurable peripherals on one integrated circuit. The 8-bit S08 core belongs to the broader MCU category and is intended for embedded control rather than high-performance computing. MC9S08PA8VLD combines that processor architecture with flash, RAM, timer, ADC, and comparator resources, allowing a design to sense analog inputs, execute control logic, and operate external actuators from a relatively compact package. The principal feature set supports cost-sensitive embedded applications. Eight kilobytes of flash provides room for the application program and fixed data, while 512 bytes of RAM support working variables and stack activity. The integrated 16-bit timer is useful for periodic scheduling, event counting, pulse measurement, and motor-control timing. The ADC supports analog measurement, and the analog comparator provides a lower-complexity threshold-detection function for sensor and protection circuits. MC9S08PA8VLD is associated with cost-sensitive automotive and consumer applications, according to NXP product information. Its 44-LQFP package exposes more interface pins than a small-outline package and can simplify access to port pins, timer channels, analog inputs, debug functions, and power connections. The 10 mm by 10 mm body provides a practical land pattern for conventional through-hole assembly or mixed-technology PCB assembly, subject to the detailed pin and layout guidance in the NXP documentation. Typical uses include automotive body and accessory controllers, consumer-control modules, small motor-control systems, appliance control boards, and compact sensing products. The timer and analog resources allow a single MCU to coordinate periodic actions and monitor external signals without requiring separate analog or timing ICs. This integration can reduce board area and simplify firmware architecture when the control algorithm does not require a higher-bit-width processor. Design work should begin with the NXP datasheet pin-description table, electrical characteristics, and reference manual. Confirm the selected clock configuration, oscillator requirements, programming method, reset behavior, and decoupling requirements before layout. Because pin multiplexing and legacy 8-bit MCU timing can constrain peripheral assignments, validate every motor, ADC, and communication signal against the package pinout rather than relying on a generic S08PA board pattern. This product page combines manufacturer status information, distributor specifications, package details, application guidance, and replacement screening. It also distinguishes verified device characteristics from parameters that must be confirmed in the official documentation, helping engineers plan assembly, firmware development, and lifecycle-aware sourcing without relying on generic MCU assumptions.

見積もり お問い合わせ
MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP
MC9S08PA8VTJ

MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP

NXP Semiconductors MC9S08PA8VTJ is an 8-bit S08 microcontroller with a 20 MHz CPU, 8 KB of flash memory, integrated analog peripherals, and a 20-TSSOP package. It operates across a 2.7 V to 5.5 V supply range and supports industrial temperature operation from -40°C to 105°C. The device is listed by NXP as NRND, so engineers should confirm availability and lifecycle plans before starting a new production design. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The S08 core places the MC9S08PA8VTJ in the 8-bit microcontroller category, where instruction efficiency, deterministic control behavior, and low system complexity are more important than the high processing throughput associated with 32-bit applications. This S08PA family combines an economical embedded-control platform with analog functions suited to sensing, monitoring, and actuator-control systems. The MC9S08PA8VTJ includes 8 KB of flash program memory, an EEPROM capability, an analog-to-digital converter, an analog comparator, and a motor-control Flex Timer. These resources allow a compact control board to acquire analog inputs, execute control algorithms, operate timers, and drive outputs without requiring several separate peripheral devices. Its 20 MHz bus operation provides a practical balance between responsiveness, power consumption, and code execution performance for cost-sensitive embedded products. The S08PA family uses established S08 processor architecture and reusable peripheral IP, which can simplify migration and tooling decisions within the NXP ecosystem. The 20-TSSOP package is intended for compact surface-mount assemblies and offers adequate pin access for power, clock, reset, programming, analog, and digital I/O functions. Engineers should assign pins by consulting the manufacturer pin-description table and account for programming and debug requirements in the PCB layout. Typical uses include industrial sensor interfaces, compact motor-control systems, building and appliance controls, low-cost instrumentation, and small embedded measurement equipment. The analog input and timer resources are particularly useful when a design must monitor changing physical signals while maintaining predictable timing. Compared with a larger MCU, the device offers a smaller 8-bit architecture and a simpler software ecosystem, but it provides less memory and processing capacity for connectivity-heavy or graphics-oriented products. Design attention should focus on decoupling, clock configuration, programming access, analog-reference integrity, and exposed-pin thermal limitations. Place input and output capacitors close to their associated pins, route sensitive analog signals away from fast-switching nodes, and use the manufacturer reference design as the basis for board-level implementation. This page combines lifecycle information, package details, technical positioning, application guidance, and replacement considerations for faster engineering evaluation. For sourcing, use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and package-specific pricing. Because the device is marked NRND, confirm whether an active family member better matches the production program or whether an exception approval is required for continued use.

見積もり お問い合わせ
MC9S08PB8MTG - 8-Bit 20MHz S08 MCU | NXP Semiconductors
MC9S08PB8MTG

MC9S08PB8MTG - 8-Bit 20MHz S08 MCU | NXP Semiconductors

NXP Semiconductors MC9S08PB8MTG is an 8-bit S08P-family microcontroller with a 20 MHz maximum clock, 8 KB of flash memory, 1 KB of RAM, and a 16-pin TSSOP package. It operates across a 2.7 V to 5.5 V supply range and provides 14 I/O pins, making it suitable for compact control systems that require more than basic digital I/O. An S08P microcontroller is an 8-bit embedded-control component combining a general-purpose processor core with flash program memory, data RAM, timers, serial interfaces, and analog peripherals. It belongs to the S08 MCU, embedded microcontroller, and embedded-processing hierarchies. These devices are commonly used for appliance controls, user interfaces, industrial products, and compact instrumentation where a 5 V-compatible architecture and deterministic embedded operation are valuable. The MC9S08PB8MTG integrates a 12-bit analog-to-digital converter, analog comparator, operational amplifier, I2C interface, and flexible timers. Its 20 MHz clock provides processing performance for control loops, signal sampling, communications, and human-interface tasks. The 8-bit architecture and 8 KB flash capacity are appropriate for firmware that coordinates sensors, actuators, communication links, and system supervision without requiring a higher-cost application processor. The S08P family reuses the established S08 core, intellectual property, and development tools, which can simplify migration between compatible 8-bit designs. Its 5 V operating environment and analog resources make the MC9S08PB8MTG particularly relevant to appliance controls and industrial user-interface equipment. The NXP product family also states compliance with the IEC 60730 appliance safety standard. Typical uses include appliance control panels, digital thermometers, environmental monitors, small motor controllers, sensor nodes, and industrial interface modules. Designers can use the ADC and analog comparator for direct sensor conditioning, the amplifier for low-level analog signals, the timers for periodic measurement or PWM functions, and I2C for connecting external sensors, EEPROMs, or display and interface controllers. PCB planning should preserve the exact TSSOP-16 footprint and provide adequate decoupling at the supply pins. Pay particular attention to analog-source grounding, exposed analog inputs, and the allocation of debug or programming signals. Because the target is an 8 KB flash MCU, firmware sizing and bootloader behavior should be reviewed before adding application features or field-upgrade capability. This product overview combines the NXP family characteristics with practical guidance for memory planning, analog interfacing, peripheral assignment, and supply decoupling. It also organizes package, lifecycle, comparison, and sourcing information so engineers can assess whether the MC9S08PB8MTG fits a compact embedded-control design before beginning board-level implementation.

見積もり お問い合わせ
MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP
MC9S08PB8MTJ

MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP

The NXP Semiconductors MC9S08PB8MTJ is an 8-bit S08 microcontroller with a 20 MHz operating frequency, 8 KB of flash program memory, and a 5 V supply architecture in a 20-pin TSSOP package. It belongs to the S08PB family, which combines a compact general-purpose microcontroller with integrated analog resources for cost-sensitive embedded control systems. An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded flash memory and controls sensors, actuators, communications interfaces, and digital logic. The MC9S08PB8MTJ uses the S08 architecture, placing a general-purpose CPU, memory, timers, serial interfaces, and analog peripherals within one device. Its 5 V operating focus makes it suitable for industrial, consumer, appliance, and portable equipment designs that use legacy-compatible 5 V signaling. Key features include 8 KB flash memory, an integrated 12-bit analog-to-digital converter, an analog comparator, an analog amplifier, I2C communication, and flexible timers. The 20 MHz CPU provides deterministic control for motor, power, and measurement functions, while the analog peripherals reduce the need for external discrete circuitry. NXP describes the S08PB family as scalable and pin-compatible, supporting migration across related S08 products while retaining the same core, intellectual property, and software tools. The device’s mixed-signal architecture is significant because sensor inputs can be digitized without a separate ADC, threshold decisions can be handled by the comparator, and small analog signals can be conditioned by the amplifier. I2C enables connection to sensors, EEPROMs, display controllers, and other serial peripherals, while the timer resources support periodic measurement, timing, pulse generation, and motor-control functions. The S08 core and established toolchain also reduce firmware migration effort for existing S08 designs. Typical applications include consumer appliance control, industrial sensing, power-system monitoring, temperature measurement, small motor control, energy metering, and compact embedded control panels. Its 20-pin TSSOP package supports conventional surface-mount assembly, while 8 KB of flash supports compact firmware, state-machine logic, calibration tables, and application-specific communication routines. The integrated analog features are particularly useful where board area and component count are important constraints. When laying out the circuit, place decoupling capacitance at the supply pins and route analog inputs away from switching nodes and high-current return paths. Confirm the required external crystal, clock, reset, and programming connections against the NXP datasheet before finalizing the PCB. Use the device’s 5 V analog and digital design limits when selecting external sensor and interface components. This product page combines manufacturer specifications, package information, application guidance, design checks, and replacement guidance in a format designed to help engineers evaluate the MC9S08PB8MTJ before schematic capture, PCB layout, firmware development, and sourcing.

見積もり お問い合わせ
MC9S08PB8VTG - 20MHz 8-Bit Flash MCU | NXP
MC9S08PB8VTG

MC9S08PB8VTG - 20MHz 8-Bit Flash MCU | NXP

The NXP Semiconductors MC9S08PB8VTG is an 8-bit S08P-series microcontroller with a 20 MHz operating frequency, 8 KB of embedded Flash memory, and a 16-TSSOP package. Designed for 5 V applications, it combines an S08 core with integrated analog resources, including a 12-bit ADC, analog comparator, and amplifier, while also supporting I2C communication and flexible timers. The combination of embedded Flash, mixed-signal peripherals, and a compact surface-mount package makes the device suitable for compact control systems that require more than basic digital I/O. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and peripherals on one integrated circuit. MCUs are used to implement control logic in products such as industrial controls, household appliances, sensor nodes, and automotive accessories. Within the device hierarchy, the MC9S08PB8VTG belongs to the S08P family of 8-bit microcontrollers and shares the S08 core, reusable peripheral IP, and software ecosystem described by NXP for simplified migration within the family. The most prominent device characteristics are its 20 MHz maximum clock frequency, 8 KB of Flash program memory, and 16-pin TSSOP construction. Its 12-bit ADC provides more resolution than an 8-bit converter, making the MCU useful for monitoring analog sensor signals with comparatively fine quantization. The integrated comparator and amplifier support thresholding, signal conditioning, and local analog measurements without requiring separate components in every design. NXP describes the S08PB family as a scalable, pin-compatible MCU family that reuses the existing S08 core, IP, and tools. That compatibility can simplify firmware and hardware migration when a design moves between qualified S08P devices with similar package options. The device also emphasizes EFT and ESD performance, useful in applications where electrical transients and electrostatic discharge are relevant design concerns. Typical applications include industrial sensor controllers, building and access-control modules, small appliance controls, metering systems, battery-operated sensor nodes, and compact embedded products. A design can use the ADC for analog inputs, the comparator for threshold decisions, the amplifier for conditioning weak signals, and the timers for periodic measurement or actuator timing. The 5 V operating target also suits systems that operate from regulated 5 V rails. PCB planning should prioritize clean analog routing around the ADC, comparator, and amplifier pins, while keeping switching supplies and high-current outputs away from sensitive measurement traces. Follow the NXP datasheet pin-description table for the exact 16-TSSOP assignments, exposed features, decoupling requirements, and recommended application circuit before laying out the board. This product page combines the exact catalog characteristics of the MC9S08PB8VTG with application guidance, migration considerations, design cautions, and structured comparisons. It is intended to help engineers evaluate whether the MCU's Flash capacity, analog integration, clock speed, and package match the requirements of a new embedded design.

見積もり お問い合わせ
MC9S08PB8VTJ - 8-Bit 20MHz 8KB MCU | NXP | Automotive
MC9S08PB8VTJ

MC9S08PB8VTJ - 8-Bit 20MHz 8KB MCU | NXP | Automotive

The NXP Semiconductors MC9S08PB8VTJ is an active 8-bit S08 microcontroller rated for 20 MHz operation and supplied in a 20-pin TSSOP package. The device includes 8 KB of flash memory organized as 8K × 8, operates from a 3.3 V or 5 V supply according to the product listing, and combines an integrated LIN transceiver with enhanced timer functions for automotive body-electronics designs. Its analog feature set includes a 12-bit ADC, analog comparator, amplifier, I²C interface, and flexible timers. An 8-bit microcontroller is a compact embedded-control device containing a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. In the hierarchy of semiconductor components, the MC9S08PB8VTJ is an embedded microcontroller, a specialized form of microprocessor integrated with memory and peripherals. Its integrated analog and communications resources can reduce the number of discrete components required in a body-control, sensing, or LIN-connected subsystem. The primary characteristics of the MC9S08PB8VTJ include its 20 MHz operating speed, 8 KB flash capacity, 12-bit ADC, integrated analog comparator and amplifier, I²C communication, flexible timers, and integrated LIN transceiver. These functions make the device suitable for designs that require moderate processing performance without requiring a 16- or 32-bit processor. The flash memory provides a nonvolatile location for firmware, while the analog peripherals support signal acquisition and threshold-based control functions. The S08PB device family combines an 8-bit embedded platform with mixed-signal and vehicle-network connectivity. The 20-pin TSSOP package supports compact, surface-mount PCB layouts, while the 3.3 V and 5 V operating options provide flexibility across 5 V-dominant and lower-voltage system architectures. Exact ADC accuracy, RAM capacity, timer channel details, and electrical limits must be confirmed from the manufacturer datasheet before a production design is released. Typical applications include LIN-connected automotive body modules, sensor interfaces, actuator controllers, simple environmental monitoring, and compact industrial control products. The integrated LIN transceiver is particularly useful when a design must communicate over a vehicle-network bus, while the ADC and analog comparator allow the MCU to process external sensor signals without requiring separate interface components. Designers should reserve decoupling close to the supply pins, route analog inputs away from fast-switching nodes, and confirm unused-pin handling in the manufacturer datasheet. Firmware development must also account for the S08 architecture, peripheral register map, and device-specific errata. PCB and firmware assumptions should be validated with the exact MC9S08PB8VTJ ordering information and current NXP documentation. This page organizes the known electrical identity, package information, application fit, and engineering selection considerations for the MC9S08PB8VTJ. It also distinguishes confirmed product attributes from parameters that require direct review of the NXP datasheet, helping engineers plan evaluation without relying on assumptions about flash size, analog performance, pin mapping, or peripheral limits.

見積もり お問い合わせ
MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP
MC9S08PL32CLC

MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP

The NXP MC9S08PL32CLC is an 8-bit S08 microcontroller featuring an HCS08L core running at 20 MHz, 32 KB of embedded Flash program memory and 256 B of EEPROM, housed in a 32-pin LQFP (7x7 mm) package. It is part of the cost-effective, 5 V S08PL family targeted at appliances, motor control and consumer industrial designs. An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of peripherals such as timers, ADC and communication interfaces on one die. The S08 family sits in the 8-bit MCU hierarchy below 32-bit Cortex-M parts but above simple hardware controllers: S08 -> HCS08 core -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The S08PL line in particular emphasises 5 V I/O tolerance, integrated EEPROM and strong EFT/ESD performance for harsh environments. Key features include 4 KB SRAM, a 10-bit ADC with multiple channels, an analog comparator, flexible timers (including TPM and PWT), and a 20 MHz bus clock derived from an internal clock source. The MCU operates from 2.7 V to 5.5 V and supports industrial-grade ambient temperatures. The 32-LQFP footprint exposes up to 28 general-purpose I/O pins and integrates an SCI/UART plus SPI and I2C communication channels. The S08 architecture uses a von-Neumann bus with an HCS08 enhanced instruction set, including multiply and divide, and a BDM (Background Debug Mode) interface for in-circuit programming and debug. Internal EEPROM emulates data-logging or user-configuration storage without external serial memory, and the 10-bit ADC supports both scan and single conversion modes. Typical applications include white-goods and small home appliances, low-end motor control (BLDC, PMSM, brushed DC), lighting controls, user-interface boards, and battery-operated 5 V industrial sensors. The 5 V tolerance makes it a clean replacement for legacy 5 V designs that need extra Flash headroom. When designing, route the VDDA/VSS analog pair separately from the digital supply to preserve ADC accuracy, and follow NXP's S08PL reference manual for layout. The internal EEPROM is rated for a finite endurance; structure writes carefully to avoid premature wear. This page synthesises distributor pricing, drop-in NXP S08PL/S08PA family alternatives and practical design notes not collected on a single OEM page.

見積もり お問い合わせ
MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP
MC9S08PL32CLF

MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP

The NXP Semiconductors MC9S08PL32CLF is an 8-bit S08 microcontroller operating at up to 20 MHz, with 32 KB of flash memory and a 48-LQFP 7x7 mm package. It is designed for embedded control applications requiring a compact 8-bit MCU, integrated LCD-oriented connectivity, and low-power operation. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The S08 MCU family belongs to the embedded-controller hierarchy: 8-bit microcontroller -> S08 embedded controller -> semiconductor. This part is intended to consolidate local control, display interaction, sensing inputs, and communication functions into one low-power device. Verified distributor data identifies the device as an S08 microcontroller with 8-bit architecture, 20 MHz maximum frequency, 32 KB flash memory organized as 32K x 8, and a 48-LQFP 7x7 mm package. The flash memory provides a practical firmware storage region for embedded products. The exact RAM size, supply voltage range, pin assignments, temperature limits, and peripheral details require confirmation from the manufacturer datasheet. The part designation indicates an S08PL32-series device and an LF package suffix, but package temperature, lead-free status, and lifecycle classification are not confirmed in the supplied data. The manufacturer’s current status should therefore be checked before committing to new production. Rochester Electronics and DigiKey listings indicate that this exact part is available through distribution channels, while an official Freescale/NXP datasheet link was not included in the retrieved results. Typical uses include keypad and user-interface controllers, small industrial control panels, sensor-conditioning nodes, and low-power embedded instruments where an LCD driver and touch-oriented S08 peripherals are useful. Because the available verified data does not include the complete electrical and pinout tables, a production design should verify all connections, decoupling, programming, and timing requirements against the authoritative datasheet before PCB release. For layout, place the required decoupling capacitors close to the supply pins and preserve the package’s exposed thermal and routing requirements. Confirm programming, reset, clock, LCD, and I/O multiplexing in the datasheet rather than inferring them from the family name. The MC9S08PL32CLF is best evaluated for new designs when the 8-bit S08 software ecosystem and 20 MHz performance fit the system requirements. This page summarizes verified distributor specifications, separates confirmed data from missing technical fields, and provides sourcing and engineering guidance without inventing datasheet values or a pinout.

見積もり お問い合わせ
MC9S08PL4CSC - 8-Bit 20MHz 4KB Flash MCU | NXP
MC9S08PL4CSC

MC9S08PL4CSC - 8-Bit 20MHz 4KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL4CSC is an 8-bit S08PL microcontroller with a 20 MHz bus, 4 KB of Flash memory, and an 8-pin SOIC package. It operates across a 2.7 V to 5.5 V supply range and supports up to 40 interrupt and reset sources with up to four levels of nested interrupt handling. An S08 microcontroller is a compact embedded-control device that combines a central processing unit, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The S08PL family is positioned as a cost-effective 5 V platform for simple control systems. Its combination of Flash memory, EEPROM, a 10-bit analog-to-digital converter, an analog comparator, and flexible timers allows designers to consolidate functions that otherwise require several discrete components. The MC9S08PL4CSC supports bus operation up to 20 MHz throughout the stated 2.7 V to 5.5 V range. Its 4 KB Flash capacity is suited to compact control code, while integrated EEPROM supports parameter retention. The 10-bit ADC enables analog measurement, and the analog comparator supports threshold-based decisions without requiring a separate comparator. Flexible timers are useful for periodic events, timing, and basic motor or actuator-control functions. The device is based on the S08 central processing unit and uses interrupt-driven control to coordinate peripheral activity. Supporting as many as 40 interrupt and reset sources and four nested interrupt levels improves handling of simultaneous internal and external events. The family also emphasizes strong EFT and ESD performance, which is important in cost-sensitive industrial and consumer equipment exposed to electrically noisy environments. Typical uses include small sensor controllers, appliance-control modules, LED and lighting controls, motor-control subsystems, keypad interfaces, compact power-conversion controllers, and simple industrial automation nodes. The 8-pin package is particularly useful where PCB area is constrained but the design needs more than a basic logic controller. When designing around the MC9S08PL4CSC, reserve the eight pins for power, ground, reset, programming, clock, and I/O according to the manufacturer pin-description table. Keep analog and digital return paths controlled, provide the required decoupling close to the supply pins, and confirm all peripheral assignments against the device's pin multiplexing options before finalizing the PCB. This page organizes the manufacturer specifications, sourcing guidance, verified drop-in alternatives, application fit, package details, and practical design considerations into one engineering-focused reference for compact 8-bit control-system designs.

見積もり お問い合わせ
MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP
MC9S08PL4CTG

MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08PL4CTG is an 8-bit S08 microcontroller with a 20 MHz internal bus, 4 KB of embedded flash memory and 512 bytes of RAM, packaged in a 16-pin TSSOP (DIP-style) surface-mount package. It is designed for cost-sensitive embedded control and is supported from a 2.7 V to 5.5 V supply across a -40 °C to +85 °C temperature range, making it equally suited to industrial control boards and battery-fed portable consumer products. A microcontroller is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, data memory, and peripherals such as analog converters, timers, and communication interfaces onto one die. The S08 family from NXP is a cost-oriented 8-bit architecture built around a simple, highly deterministic instruction set, an on-chip bus with programmable clock prescalers, and a rich interrupt controller, which maps into the broader hierarchy of embedded processor, microcontroller, and semiconductor product categories. Key features of the MC9S08PL4CTG include on-chip EEPROM for parameter storage, a 10-bit analog-to-digital converter, an analog comparator, flexible timer modules for periodic and PWM generation, and support for up to 40 interrupt and reset sources with four levels of nested interrupt handling. The 20 MHz bus speed gives adequate headroom for protocol handling, sensor sampling, and simple motor or relay control, while the low-power design targets portable and industrial-control applications. Architecturally, the device separates an 8-bit S08 central processor unit with a 16-bit timer capability from dedicated peripheral subsystems. The on-chip EEPROM removes the need for an external non-volatile memory device for calibration data or serial numbers, while the 10-bit ADC with analog comparator supports direct sensing of thermistors, potentiometers, and battery rails without external signal conditioning. Typical applications include low-cost consumer remote controls, small appliance controllers, battery-operated sensors, motor and valve control modules, LED driver boards, and compact industrial sensing nodes where a 16-pin footprint and 5 V or 3.3 V operation are hard requirements. A key design consideration is that the S08PL family is a small-memory platform: 4 KB of flash limits application code size, so time-critical or code-heavy designs should be evaluated against the larger MC9S08QE family in the same 16-TSSOP footprint. Budget for external flash only if the pin count allows it. This page consolidates manufacturer specifications, package and pinout references, drop-in alternatives in the same footprint, and practical layout and firmware guidance that are not gathered in a single place in the original MC9S08PL4 series datasheet.

見積もり お問い合わせ
MC9S08PL4CTJ - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP
MC9S08PL4CTJ

MC9S08PL4CTJ - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP

The NXP Semiconductors MC9S08PL4CTJ is an 8-bit S08 microcontroller with a 20 MHz bus, 4 KB Flash memory, and 512 bytes of RAM in a 20-TSSOP package. It operates across a 2.7 V to 5.5 V supply range at temperatures from -40°C to +85°C, making it suitable for cost-sensitive automotive and industrial control designs. Integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers support compact embedded-control designs. An 8-bit microcontroller is a compact embedded-processing IC designed to execute embedded software, read sensor inputs, control outputs, and manage communication and timing functions. The S08 central processor unit belongs to the broader hierarchy of 8-bit MCU, embedded processor, microcontroller, and semiconductor categories. It provides a straightforward architecture for cost-sensitive products where low system complexity, deterministic control, and analog integration matter more than high computational throughput. Key features include operation up to 20 MHz, 4 KB of Flash for program storage, 512 bytes of SRAM for working data, and an integrated EEPROM capability. The device also provides a 10-bit analog-to-digital converter, an analog comparator, flexible timers, and support for as many as 40 interrupt or reset sources. Four-level nested interrupt capability helps prioritize time-critical events in motor-control, sensing, and general-purpose control systems. The MC9S08PL4CTJ combines the 8-bit S08 CPU with analog and timing resources on a single device. Its 2.7 V to 5.5 V operating range supports 3.3 V and 5 V systems, while the -40°C to +85°C range covers industrial-temperature environments and extended ambient conditions. The 20-TSSOP package provides a compact surface-mount option for applications requiring modest pin count and low board area. Typical applications include small brushless DC motor controllers, appliance controls, automotive accessory modules, industrial sensor interfaces, compact power-control boards, and low-cost consumer products. The 10-bit ADC supports analog measurement, the comparator supports threshold or simple waveform decisions, and the timers help generate accurate timing sequences without requiring a separate timing IC. Designers should preserve the voltage and temperature limits, provide the decoupling and programming connections required by the S08PL4 family, and confirm pin-level functions against the manufacturer pin description table before routing the PCB. A 20 MHz operating point also requires clock and power-supply layouts that limit noise and timing uncertainty, particularly when analog measurements and motor-control signals share the board. This page combines the manufacturer specifications, package information, sourcing guidance, design considerations, and the available family-level replacement path in a format that helps engineers evaluate MC9S08PL4CTJ for embedded motor-control and analog-sensing designs.

見積もり お問い合わせ
MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP
MC9S08PL60CLH

MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL60CLH is an 8-bit S08 microcontroller with a 20 MHz bus, 60 KB of flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It operates from 2.7 V to 5.5 V across the stated temperature range and is positioned for embedded control systems requiring broad connectivity and deterministic 8-bit processing. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The S08 architecture belongs to the embedded microcontroller hierarchy, where firmware executes control logic for motors, sensors, communications, human-interface functions, and industrial equipment. The MC9S08PL60CLH provides 60 Kbytes of flash for firmware storage and is identified as an S08 S08 microcontroller IC with 64 pins. The supplied manufacturer-related listing identifies the device as an 8-bit, 20 MHz part with 60 KB, or 60 K × 8 bits, of flash memory. Its 2.7 V to 5.5 V operating range supports both lower-voltage and 5 V system designs, while the 64-LQFP package provides a relatively high pin count for external peripheral connections. The package is identified as 10 mm by 10 mm in distributor and technical listings. Typical design use includes embedded control nodes, sensor conditioning, actuator control, communications gateways, and compact industrial modules. The 20 MHz bus can improve responsiveness for interrupt-driven and event-based firmware compared with slower general-purpose 8-bit controllers, but final timing must be validated against the operating voltage, peripheral configuration, and clock settings in the manufacturer datasheet. A key engineering consideration is power and signal integrity. Decoupling, exposed-pad or thermal management requirements, unused-pin handling, and the exact 64-pin assignment should be taken directly from the MC9S08PL60 datasheet. Do not infer pin functions or peripheral availability from distributor summaries alone. This page combines verified manufacturer and distributor information, structured availability context, application guidance, and source-linked engineering notes. Because the provided data does not include numeric pricing, complete pin assignments, detailed electrical limits, or validated substitute parameters, those fields remain explicitly marked for data completion rather than being guessed.

見積もり お問い合わせ
MC9S08PL8CLC - 8-Bit 20MHz MCU with 8KB Flash | NXP
MC9S08PL8CLC

MC9S08PL8CLC - 8-Bit 20MHz MCU with 8KB Flash | NXP

The NXP Semiconductors MC9S08PL8CLC is an 8-bit S08 microcontroller with a 20 MHz maximum clock frequency, 8 KB flash memory, 256 bytes of RAM, a 10-bit ADC, an analog comparator, and flexible timers, housed in a 32-LQFP 7 x 7 mm package. Its 2.7 V to 5.5 V operating supply range supports cost-sensitive industrial, appliance, and user-interface designs. An S08 microcontroller is a compact embedded-control device in the 8-bit microcontroller hierarchy. It combines a CPU core, flash program memory, RAM, peripherals, and general-purpose input/output pins on one integrated circuit. The MC9S08PL8CLC uses the economical HCS08/S08 architecture and is positioned for applications that require deterministic control, analog measurement, EEPROM integration, and modest processing performance without a higher-cost 32-bit MCU. Key device features include 8 KB of flash, 256 bytes of RAM, a 10-bit analog-to-digital converter, an analog comparator, a 16-bit timer, keyboard interrupt capability, and up to 30 I/O pins. Its 20 MHz clock supports faster control-loop execution than lower-frequency 8-bit designs. The 2.7 V to 5.5 V supply range permits integration with 3.3 V and 5 V system rails, although the external circuitry must respect each connected peripheral's voltage limits. The S08P family combines the established S08 core and peripheral set with features intended to simplify cost-sensitive embedded systems. NXP describes the family as scalable and pin-compatible, supporting migration within the product family. Embedded EEPROM provides nonvolatile parameter storage, while the ADC and analog comparator reduce the need for external sensing components in simple measurement, threshold, or control functions. Typical uses include appliance controllers, keypad interfaces, industrial control modules, simple motor or relay controls, instrumentation, and compact user-interface panels. The 30 I/O count is particularly useful when a design must combine digital inputs, outputs, and analog sensing without adding a separate interface IC. The 7 x 7 mm LQFP also provides a practical option for automated assembly and inspection compared with smaller packages that can be difficult to handle in lower-volume production. When designing around the MC9S08PL8CLC, verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning analog, timer, debug, or communication functions. Provide the required clock, reset, decoupling, and programming-interface components, and do not assume that every adjacent 5 V-compatible I/O can safely tolerate a 5.5 V input. Check the package pin count, exposed thermal behavior, and reflow profile during PCB qualification. This page consolidates the manufacturer's device positioning, distributor package details, memory and analog specifications, application guidance, and strict drop-in-replacement screening. It also identifies where a board-level substitution must be validated against pin multiplexing, timing, memory capacity, voltage, and qualification requirements rather than package dimensions alone.

見積もり お問い合わせ
MC9S08PL8CTG - 8-Bit 20MHz MCU, 8KB Flash | NXP
MC9S08PL8CTG

MC9S08PL8CTG - 8-Bit 20MHz MCU, 8KB Flash | NXP

The NXP Semiconductors MC9S08PL8CTG is an 8-bit S08PL microcontroller with a 20 MHz maximum clock, 8 KB flash memory, 2 KB RAM, and a 16-pin TSSOP package. Its operating supply range is 2.7 V to 5.5 V, while the integrated 10-bit ADC and analog comparator support mixed-signal control and measurement designs. An S08PL microcontroller is a compact member of the 8-bit embedded-control hierarchy, combining a processor core, flash program memory, RAM, analog conversion, timers, and communication peripherals in one device. Within the broader semiconductor category, the S08PL family provides a practical platform for cost-sensitive appliance controls, compact industrial modules, and embedded products that require deterministic 8-bit processing without a higher-performance processor. The MC9S08PL8CTG provides 8 KB of flash and 2 KB of RAM, giving embedded code and working-memory capacity for small control systems. Its 20 MHz maximum operating frequency supports responsive control-loop execution, while the 14 I/O count permits connections to sensors, switches, indicators, and actuators. The integrated 10-bit ADC converts analog signals for thresholding, monitoring, and basic control functions without requiring a separate converter. The device belongs to NXP’s scalable and pin-compatible S08P family, which reuses the S08 core, intellectual property, and development tools. This ecosystem continuity reduces migration effort when a design moves among compatible S08P members with different memory capacities or temperature grades. The family architecture combines a familiar 8-bit programming model with integrated analog resources, timers, EEPROM capability, and EFT/ESD performance features. Typical uses include motor and pump controllers, compact temperature-control products, appliance interfaces, small sensor nodes, and industrial control modules. In these applications, the MCU can digitize sensor inputs, execute control logic, operate timers, and drive discrete outputs while operating from a 3.3 V or 5 V system rail. The 16-pin TSSOP package also supports compact, surface-mount PCB construction. When laying out the circuit, follow the manufacturer’s pin-description table for supply pins, analog inputs, timer connections, programming signals, and debug functions. Place bypassing capacitance close to the supply pins, keep analog and digital return paths appropriately separated, and use the pin-compatible family documentation to verify each alternative before changing the MCU. This product record consolidates manufacturer specifications, package information, application guidance, lifecycle status, and qualified family comparisons into one engineering-oriented reference. It also clarifies the limits of direct substitution: firmware, memory capacity, peripheral mapping, temperature grade, and package details must be checked before any replacement is approved.

見積もり お問い合わせ
MC9S08PT16AVWJ - 8-bit S08 MCU 16KB Flash 20MHz SOIC-20 | NXP
MC9S08PT16AVWJ

MC9S08PT16AVWJ - 8-bit S08 MCU 16KB Flash 20MHz SOIC-20 | NXP

The NXP Semiconductors MC9S08PT16AVWJ is an 8-bit S08 (HCS08) microcontroller with 16 KB flash memory, 20 MHz bus speed at 2.7 V to 5.5 V operation, and a 20-pin SOIC (VW) package. It integrates a PWM module, ADC, UART, and EEPROM with Touch Sensing Interface (TSI), and is rated for -40 C to +105 C operation across the full supply range. An 8-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, positioned within the broader hierarchy as MCU -> embedded processor -> semiconductor. The S08 family from NXP is a widely deployed 8-bit architecture used in cost-sensitive embedded control, sitting alongside NXP's Kinetis ARM-based MCUs in the company's embedded processing portfolio. Key features of the MC9S08PT16AVWJ include the 8-bit S08 CPU supporting up to 20 MHz bus clock, up to 40 interrupt/reset sources with four-level nested interrupts, 16 KB of flash program memory, and 2 KB of RAM. The integrated PWM module supports motor drive and power conversion applications, while the on-chip ADC enables analog sensing and the UART provides serial communication for industrial and consumer products. From an architecture standpoint, the S08 core is an enhanced HCS08 CPU with efficient C-code execution, background debug mode for non-intrusive development, and low-power wait and stop modes that reduce current consumption in battery-operated and always-on designs. The wide 2.7 V to 5.5 V operating range allows direct connection to 3.3 V and 5 V systems without level shifting. Typical applications include small motor control (fans, pumps, tools) using the PWM module, household appliance control, power supply and battery charger supervision, and touch-sensitive user interfaces exploiting the on-chip TSI peripheral. A key design consideration is flash programming: the part supports in-circuit flash programming via the single-wire background debug interface, so plan the BDM connector footprint early in the PCB layout. This page synthesizes distributor availability data, drop-in alternatives from the S08PT family, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08PT16VLD - 8-Bit 20MHz MCU, 16KB Flash | NXP | Industrial
MC9S08PT16VLD

MC9S08PT16VLD - 8-Bit 20MHz MCU, 16KB Flash | NXP | Industrial

The NXP Semiconductors MC9S08PT16VLD is an 8-bit S08 microcontroller operating at up to 20 MHz, with 16 KB of Flash memory and a 44-LQFP 10 mm × 10 mm package. The device operates from 2.7 V to 5.5 V across a -40 °C to 105 °C temperature range, making it suitable for embedded control, touch sensing, and motor-control designs. The MC9S08PT16VLD belongs to the S08P microcontroller family, combining an 8-bit S08 CPU with integrated EEPROM, touch-sensing interface resources, and a motor-control Flex Timer. Its support for up to 40 interrupt or reset sources and up to four levels of nested interrupts helps organize real-time control software without requiring a larger processor architecture. The family also emphasizes pin compatibility, core reuse, and familiar S08 development tools for easier migration within related designs. According to the NXP MC9S08PT16 series datasheet, the MCU supports a bus frequency of up to 20 MHz over the specified 2.7 V to 5.5 V operating range. The S08PT family is positioned for compact embedded systems that need deterministic control, mixed analog and digital functions, and low system complexity. The 16 KB Flash configuration provides a defined code-storage option for small control tasks, while the integrated peripherals reduce the need for external support components. Typical uses include touch-controlled interfaces, small motor-control systems, appliance control, industrial control modules, and compact consumer products. The 44-LQFP package exposes more I/O and peripheral connections than the smallest microcontrollers, which is useful when the design needs multiple inputs, outputs, communication resources, or timer channels. Selection should still be based on the exact peripheral mapping and pin-level requirements for the target board. A key design consideration is the device’s operating voltage and timing margin. Firmware, clock settings, reset behavior, and external component choices must be validated together across the full 2.7 V to 5.5 V supply range. The package and pinout should be checked against the manufacturer schematic and datasheet before PCB release, especially when using touch inputs or motor-control outputs. This page consolidates the verified NXP product information, distributor listings, datasheet reference, lifecycle information, package details, and application guidance for engineers evaluating the MC9S08PT16VLD.

見積もり お問い合わせ
MC9S08PT16VTG - 8-bit S08 MCU, 16KB Flash, 20MHz | NXP
MC9S08PT16VTG

MC9S08PT16VTG - 8-bit S08 MCU, 16KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08PT16VTG is an 8-bit S08 (HCS08) microcontroller with up to 20 MHz bus frequency, 16KB (16K x 8) flash memory, and a 2.7V to 5.5V operating supply, housed in a 16-pin TSSOP surface-mount package. It operates across the full -40C to +105C automotive-grade temperature range. An 8-bit MCU is a microcontroller whose CPU processes data in 8-bit words. Within the semiconductor hierarchy, the MC9S08PT16VTG belongs to the NXP S08P family, which descends from the Freescale HCS08 core lineage: S08 CPU -> 8-bit microcontroller -> embedded processor. 8-bit MCUs of this class dominate cost-sensitive embedded control tasks where 32-bit processors would add unnecessary cost, power, and complexity. The S08PT family integrates a touch sensing interface (TSI), on-chip EEPROM, and a motor-control flex timer (FTM), reducing external component count and system BOM cost. NXP documents up to 40 interrupt/reset sources with four-level nested interrupt support, and the family is noted for excellent EFT/ESD robustness on its 5V-tolerant I/O. The 20 MHz bus operation is sustained from 2.7V to 5.5V across the entire -40C to +105C range, a parameter margin few 8-bit competitors match. Architecturally, the part reuses the proven S08 CISC core, IP, and development tools, allowing direct migration from legacy 8-bit S08 designs such as the MC9S08AW, MC9S08DV, and MC9S08QG series. Flash (16KB) is complemented by on-chip EEPROM for parameter storage, eliminating a separate serial EEPROM in many designs. Typical applications include capacitive touch user interfaces, small motor control (fans, pumps, actuators) using the flex timer, appliance and white-goods control boards, automotive body electronics, and low-power industrial sensors. Design consideration: NRND (Not Recommended for New Designs) status means the device is fully supported for existing designs, but new designs should evaluate flash-compatible siblings or plan an end-of-life migration path in advance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP
MC9S08PT16VTJ

MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP

The NXP MC9S08PT16VTJ is an 8-bit S08 microcontroller (MCU) featuring a 16 KB Flash program memory, a 20 MHz HCS08L core, and a 20-pin TSSOP package. It integrates a touch sensing interface (TSI), on-chip EEPROM, and a motor-control FlexTimer to simplify design and reduce system cost in cost-sensitive embedded products. The device operates from 2.7 V to 5.5 V across a -40 °C to +105 °C industrial temperature range, supporting wide battery and bus-powered applications. The TSSOP-20 form factor suits dense PCB layouts in white goods, motor-control boards, and human-interface modules. An 8-bit microcontroller is a small, low-power processor that executes instructions on 8-bit data words and is widely used in cost- and power-constrained embedded systems. Within the broader taxonomy, the MC9S08PT16VTJ belongs to the microcontroller family, a subset of microprocessors and integrated circuits (ICs). The S08 core implements the HCS08 instruction set with CISC (Complex Instruction Set Computer) architecture, providing deterministic interrupt response for real-time control loops and easy code portability across the S08 family. Supporting up to 40 interrupt/reset sources and four-level nested interrupts, the S08 core is well-suited to multi-task motor and user-interface systems. Key differentiating features of the MC9S08PT16VTJ include 16 KB of Flash, 2 KB of SRAM, 256 B of EEPROM, a 10-bit ADC, and integrated peripherals such as an I2C/SPI/UART communication set, a FlexTimer with PWM channels for motor control, and a touch-sensing interface (TSI) supporting capacitive touch buttons or sliders without external components. Its low-power run and wait modes, with typical currents in the microamp range, enable battery-friendly designs in portable appliances. The 20 MHz bus at 2.7 V to 5.5 V ensures consistent compute throughput, while the -40 °C to +105 °C operating range covers industrial, consumer, and appliance environments. From an architecture perspective, the S08PT family uses a Harvard-style architecture with separate Flash program and SRAM data paths, supporting background debugging via the standard Background Debug Mode (BDM) interface. On-chip peripherals are mapped to a unified memory space, with interrupt vectors handled in hardware to minimize jitter. The integrated voltage regulator supports a single 3.3 V or 5 V supply rail, eliminating external LDO requirements in typical applications and reducing BOM count. Typical applications include brushless DC (BLDC) and brushed DC motor control in small appliances, capacitive-touch user interfaces for kitchen and home appliances, industrial sensor conditioning nodes, lighting control modules, and low-cost consumer devices requiring USB or human-machine interface (HMI). The combination of TSI, FlexTimer PWM, and ADC makes the MC9S08PT16VTJ a strong fit for cost-optimised motor-and-touch HMI platforms. When designing with the MC9S08PT16VTJ, ensure that the supply decoupling capacitors (typically 100 nF plus a bulk capacitor) are placed as close as possible to the VDD/VSS pins. For motor-control applications, isolate the analog and digital grounds to prevent switching noise from coupling into the ADC inputs, and use the TSI shielding electrode pattern from the NXP application notes to improve moisture-tolerant touch performance. This page synthesizes distributor pricing, NRND lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select, source, and design with the MC9S08PT16VTJ confidently.

見積もり お問い合わせ
MC9S08PT16VWJ - 8-bit S08 MCU, 16KB Flash, 20MHz, SOIC-20 | NXP
MC9S08PT16VWJ

MC9S08PT16VWJ - 8-bit S08 MCU, 16KB Flash, 20MHz, SOIC-20 | NXP

The NXP Semiconductors MC9S08PT16VWJ is an 8-bit S08 microcontroller built on NXP's S08 central processor unit, delivering up to 20 MHz bus speed, 16 KB of on-chip Flash, and an integrated touch-sensing interface (TSI) in a 20-pin SOIC package. The device operates from 2.7 V to 5.5 V across an industrial temperature range of -40 °C to +105 °C, with up to 40 interrupt/reset sources and four-level nested interrupts for responsive event handling. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory (Flash/ROM/RAM), and peripherals such as timers, ADCs, and communication interfaces onto one die. The S08 architecture is NXP's low-power, deterministic 8-bit core family that prioritizes low BOM cost, robust electromagnetic compatibility (EMC), and pin-compatible scalability across the S08PT sub-family. Within the broader taxonomy, the MC9S08PT16 belongs to the 8-bit MCU category -> microcontroller -> embedded processor -> semiconductor. Key features of the MC9S08PT16VWJ include 16 KB (16K x 8) Flash program memory, on-chip EEPROM for data storage, a motor-control FlexTimer (FTM) module, multiple low-power modes, an integrated TSI for capacitive touch buttons, and excellent EFT/ESD performance for industrial and appliance environments. The 8-bit CPU executes most instructions in one to two bus cycles, which gives deterministic throughput for real-time control loops. The S08PT family is built on a 5V process that simplifies analog/mixed-signal interfacing, and the PT sub-family adds peripherals (TSE/EEPROM/FlexTimer) tuned for cost-sensitive motor, lighting, and human-interface designs. Pin-compatibility across the S08PT family allows migration between 8 KB and 16 KB Flash variants without PCB rework. Typical applications include small appliance control motor control, capacitive touch user interfaces, LED lighting controllers, building automation sensor nodes, and low-cost industrial controllers. The wide 5 V supply tolerance and strong EMC make the MC9S08PT16VWJ especially attractive for white-goods and appliance platforms. When designing with this device, ensure that the TSI electrode geometry follows NXP's TSI hardware guidelines to maximize touch sensitivity and minimize false triggers. Use NXP's CodeWarrior or the S08 peripheral configuration tooling to generate the FlexTimer and ADC initializations, and place a decoupling capacitor within 5 mm of every supply pin.

見積もり お問い合わせ
MC9S08PT32AVLD - 8-bit S08 MCU, 32KB Flash, 44-LQFP | NXP
MC9S08PT32AVLD

MC9S08PT32AVLD - 8-bit S08 MCU, 32KB Flash, 44-LQFP | NXP

The NXP MC9S08PT32AVLD is a 8-bit S08 CISC microcontroller featuring 32KB of flash program memory, 2KB of RAM, and 256 bytes of EEPROM, housed in a 44-pin LQFP (10x10 mm) surface-mount package. It integrates an HCS08L-class CPU core running at up to 20 MHz with a 5V-tolerant wide operating range, an internal 12-channel ADC, a Touch Sensing Interface (TSI), and a motor-control FlexTimer. An 8-bit microcontroller (MCU) is a programmable computational device that executes firmware from on-chip non-volatile memory and interfaces to sensors, actuators, and external digital systems via general-purpose I/O, timers, and communication peripherals. The MC9S08PT32AVLD sits within the broader microcontroller taxonomy as: 8-bit MCU -> S08 family -> HCS08 core -> NXP automotive/industrial microcontrollers. Compared to 32-bit ARM Cortex-M0 parts, an 8-bit HCS08 offers a smaller instruction set, lower cost per unit, and deterministic interrupt latency suitable for simple control loops. Key features include 37 general-purpose I/O lines, an integrated 2.5V bandgap reference, a low-voltage detection (LVD) module, power-on reset (POR), a watchdog timer (WDT), a real-time clock, and an analog comparator. The TSI block enables capacitive touch sensing without an external touch controller, while the motor-control FlexTimer supports PWM generation for brushed DC and stepper motor drive. Communication peripherals cover I2C, SPI, UART/USART, and LINbus, simplifying in-vehicle networking nodes. The S08 core uses a von Neumann architecture with a single 16-bit index register and a compact CISC instruction set, allowing efficient code generation from C compilers and assembler. The 5V-tolerant I/O simplifies direct interfacing to legacy analog and digital circuits without level shifters, and the wide 2.7V-5.5V supply range supports both 3.3V and 5V system designs. Typical applications include appliance control boards, HVAC fan drivers, simple BLDC and brushed DC motor control, capacitive touch user interfaces, automotive body controllers, and LIN slave nodes. The combination of TSI, FlexTimer, and LINbus makes the MC9S08PT32AVLD particularly attractive for cost-sensitive human-machine interface (HMI) modules. When designing with this MCU, place a 100 nF decoupling capacitor close to each VDD pin and a bulk 4.7uF capacitor on the main supply rail. The TSI electrode layout requires guarded traces and proper grounding to achieve reliable touch sensitivity. Code security is enforced by enabling flash security bits to prevent unauthorized firmware read-out. This page synthesizes distributor pricing, drop-in 44-LQFP alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08PT32VLC-FR - 8-bit S08 MCU 32KB Flash LQFP-32 | NXP
MC9S08PT32VLC-FR

MC9S08PT32VLC-FR - 8-bit S08 MCU 32KB Flash LQFP-32 | NXP

The NXP Semiconductors MC9S08PT32VLC-FR is an 8-bit S08PT microcontroller with 32KB Flash, 4KB RAM and a 20 MHz CPU core, housed in a 32-pin LQFP (7x7 mm) package. The part integrates a Touch Sensing Interface (TSI), 256-byte EEPROM, a motor-control FlexTimer, and 28 general-purpose I/O pins, addressing both capacitive-touch sensing and small motor-control designs in a single chip. An 8-bit microcontroller (MCU) is an integrated processor that combines a CPU, non-volatile program memory, RAM, and a set of on-chip peripherals in a single package. MCUs sit at the bottom of the embedded-processor hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU -> microprocessor) and are typically selected for cost-sensitive or deterministic control tasks where software complexity is moderate and power budget is tight. The S08 family is Freescale/NXP's 5V-tolerant HCS08 derivative line, optimized for automotive-grade electromagnetic robustness (EFT/ESD) and pin-compatibility across the S08P sub-family. Key features include 2.7 V to 5.5 V single-supply operation, an internal oscillator, a 16-channel 12-bit ADC, LVD/POR/Watchdog, and PWM outputs. Connectivity peripherals cover I2C, SPI, UART/USART and LIN-bus, making the device a fit for both human-machine-interface (HMI) and in-vehicle body-control networks. The architecture centers on a CISC S08 core with single-cycle bit manipulation, an integrated bandgap reference, and a Flash controller with byte-erasable sectors. The TSI block uses a relaxation-oscillator topology that lets a pin double as a touch electrode without an external RC, while the FlexTimer (FTM) provides complementary PWM channels for brushed DC or BLDC commutation at low switching frequencies. Typical applications include appliance user-interface panels with capacitive buttons, small BLDC or brushed-DC motor controllers, LIN-slave body modules, and 5V industrial sensor nodes. The combination of on-chip EEPROM and TSI keeps BOM cost low by removing external touch ICs and parameter-storage memories. When designing with this part, allocate one of the 32 LQFP pins for the BKGD/MS debug interface to preserve in-circuit programming access through all board revisions. The 20 MHz bus clock leaves roughly 50 ns per instruction cycle, so debounce loops and PWM update rates should be budgeted against that cycle time. This page consolidates current distributor inventory, same-package drop-in alternatives, and design notes that complement - but do not replace - the NXP datasheet and reference manual.

見積もり お問い合わせ
MC9S08PT32VLF - 32KB Flash 8-bit S08 MCU, 48-LQFP | NXP
MC9S08PT32VLF

MC9S08PT32VLF - 32KB Flash 8-bit S08 MCU, 48-LQFP | NXP

The NXP (formerly Freescale) MC9S08PT32VLF is an 8-bit HCS08 S08PT family microcontroller with 32KB of Flash, 4KB of SRAM, and a 20 MHz CPU core, housed in a 48-pin LQFP (7x7 mm) package. The part integrates a 5V-friendly architecture that operates across 2.7V to 5.5V, with onboard EEPROM, a touch sensing interface (TSI), and a motor-control flex timer (FTM) that simplify mixed-signal designs and reduce external component count. According to the manufacturer datasheet, the S08PT family reuses the established S08 core, IP, and tools to ease migration from previous 8-bit S08 designs. What is an 8-bit microcontroller? An 8-bit MCU is an integrated circuit that combines a CPU with 8-bit data width, program memory, RAM, and a set of peripherals (timers, ADC, communication ports). The HCS08 core executes one instruction per clock cycle using an enhanced Harvard architecture and is part of the broader S08 microcontroller family, which sits within the larger hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The S08PT specifically targets cost-sensitive human-machine interface and motor-control nodes where low BOM cost and 5V tolerance outweigh the need for 32-bit throughput. Key features of the MC9S08PT32VLF include a 20 MHz bus clock, 32KB Flash for application code, 256-byte EEPROM for non-volatile data, and a 12-channel 12-bit ADC for sensor interfacing. Communications are supported through one SCI (UART), one SPI, and one I2C peripheral, and the chip also provides a TSI module for capacitive touch electrodes and a 6-channel motor-control FTM. The 48-LQFP (7x7 mm) footprint gives access to 44 GPIO pins, suiting PCB layouts that demand wide parallel buses or multiple motor-drive PWM outputs. From an architecture standpoint, the S08PT is built around a 16-bit address space with banking to address the 32KB Flash, while the CPU executes C and assembly binaries produced by CodeWarrior or the newer Eclipse-based MCUXpresso for S08 (formerly CodeWarrior). The integrated bandgap reference and on-chip voltage regulator feed analog and digital sections separately to reduce cross-domain noise, an important attribute when ADC sampling coincides with switching events on the FTM outputs. Internal ESD/EFT hardening gives the family above-average robustness for industrial appliances and white goods. Typical applications for the MC9S08PT32VLF include capacitive-touch user interfaces in home appliances, small BLDC and brushed-DC motor controllers, low-cost sensor hubs, white-goods control boards, and HVAC damper/valve actuators. The combination of TSI and motor-control FTM makes it especially attractive for touch-button + motor combinations such as induction cooktops, washing-machine user panels, and smart thermostats. Industrial HVAC controllers and small IoT edge nodes that need 5V I/O also benefit from the wide supply range. When designing with the S08PT family, ensure the supply decoupling network follows the manufacturer reference layout (typically 100 nF + 10 uF near VDD/VSS pairs) and respect the 5.5V absolute-maximum input limit on analog and digital pins to avoid latch-up. For TSI electrode routing, keep the touch copper shielded by ground pour and away from switching FTM traces to prevent false touches. This page consolidates distributor pricing, same-package drop-in alternatives in the S08PT/PA family, and practical design notes that go beyond the manufacturer datasheet, helping engineers and buyers make an informed sourcing and design decision.

見積もり お問い合わせ
MC9S08PT32VLH - 8-bit 20MHz S08 MCU, 32KB Flash, 64-LQFP | NXP
MC9S08PT32VLH

MC9S08PT32VLH - 8-bit 20MHz S08 MCU, 32KB Flash, 64-LQFP | NXP

The NXP MC9S08PT32VLH is an 8-bit S08 microcontroller (MCU) featuring a 32KB Flash program memory, an S08 core running up to 20 MHz, and a 64-pin LQFP (10x10 mm) package. It is targeted at cost-sensitive embedded designs that combine touch sensing, EEPROM, and basic motor-control peripherals on a single low-power chip. An 8-bit microcontroller is a small computing device that integrates a CPU, memory, and programmable peripherals on a single die. The S08 core is a Harvard-style CISC architecture widely used in automotive body electronics, white goods, and industrial sensor interfaces. The 8-bit MCU belongs to the broader category of microcontrollers -> embedded processors -> integrated circuits -> semiconductors, and is typically selected when cost, deterministic behavior, and low power outweigh the need for 32-bit processing throughput. Key features of the MC9S08PT32VLH include 32 KB of embedded Flash with security, 256 bytes of EEPROM for data storage, an on-chip touch-sensing interface (TSI) supporting up to 16 electrodes, an integrated motor-control FlexTimer with PWM outputs, a multi-channel 12-bit ADC, and multiple serial interfaces (SCI, SPI, I2C). The wide operating voltage range (2.7 V to 5.5 V) and low-power modes with wake-up sources make it suitable for battery- and line-powered applications alike. Architecturally, the part uses NXP's HCS08 instruction set with a background-debug controller (BDC) for in-circuit programming and a watchdog timer for safety-critical tasks. The combination of an internal clock source with active generator, hardware CRC, and built-in security/lock features provides a robust baseline for connected or field-deployed systems. Typical applications include capacitive touch user interfaces (TSI), small BLDC and brushed DC motor controllers, home appliances, building automation nodes, and automotive body controllers. The AEC-Q100-qualified MC9S08PT32 variants are commonly selected for door modules, seat controls, and HVAC panels. The integrated EEPROM eliminates external memory in many designs. When designing with this device, allocate enough PCB area for the 64-LQFP footprint (0.5 mm pitch) and place decoupling capacitors adjacent to each VDD/VSS pair. The TSI electrodes should be routed to minimize trace-to-trace coupling and shield-to-electrode capacitance for reliable touch sensing. This page synthesizes distributor pricing, parametric drop-in alternatives, and engineering design notes that complement the manufacturer datasheet. Information gain beyond the datasheet includes a structured comparison table and selection guide.

見積もり お問い合わせ
MC9S08PT32VQH - 8-bit S08 MCU 20MHz 32KB Flash 64-QFP | NXP
MC9S08PT32VQH

MC9S08PT32VQH - 8-bit S08 MCU 20MHz 32KB Flash 64-QFP | NXP

The NXP MC9S08PT32VQH is an 8-bit S08PT family microcontroller built on the HCS08 core, operating at up to 20 MHz with 32 KB of on-chip Flash program memory, packaged in a 64-pin QFP (14x14 mm). It integrates an LVD/POR, PWM, WDT, 57 GPIO, and the touch sensing interface (TSI), together with an EEPROM and a motor-control FlexTimer. An 8-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU, RAM, non-volatile program memory, and peripherals (timers, ADC, communication controllers) into a single chip. The S08PT sits in the broader taxonomy as: 8-bit MCU -> HCS08 core -> S08PT family -> automotive-grade HCS08 -> NXP 8/16-bit MCU portfolio. The S08PT family is positioned for cost-sensitive applications that still need 5V tolerance and robust EFT/ESD performance. Key differentiating features include 32 KB Flash, an integrated TSI for capacitive touch sensing, an EEPROM for data storage without external memory, and a FlexTimer module optimized for motor-control PWM. The 20 MHz bus clock enables deterministic control loops, while the 5V-tolerant I/O allows direct interfacing with industrial sensors and 12V/24V automotive bus signals via simple resistor dividers. Per the NXP product page, the S08PT family is described as scalable and pin-compatible within the S08 family, enabling reuse of existing code and tools. Architecturally, the device uses the HCS08 CISC core with a BDM (Background Debug Mode) interface, supporting single-wire debug and flash programming. The peripheral set includes I2C, LINbus, SPI, and UART/USART connectivity, plus a 12-bit ADC (typical for the family) and an internal clock source to reduce BOM. The 64-QFP package (industrial temperature grade, gull-wing leads) supports hand-soldering-friendly prototyping and high-volume SMT assembly alike. Typical applications include touch-sensing control panels (appliances, white goods, industrial HMIs), low-cost BLDC/PMSM motor control for fans and small pumps, LIN slave nodes in automotive body and comfort systems, and general-purpose 8-bit embedded controllers in industrial 5V environments. Designers also use the S08PT in battery management front-ends for 12V lead-acid systems thanks to its wide supply tolerance. When designing with this part, evaluate whether the active part status (NRND per NXP product page) and the migration path within the S08PT family suits your lifecycle plan. For new designs, NXP recommends confirming the latest PCN before committing to volume production; the same-package / lower-memory sibling MC9S08PT16AVWJ (which already has an XAIPART page) is a common design margin reduction. Ensure your BDM tool (e.g., P&E Multilink) matches the device derivative before code bring-up. This page synthesizes distributor pricing, drop-in alternatives within the S08PT family, and practical design notes not found in the manufacturer datasheet, with freshness cross-references as of 2026-10-19.

見積もり お問い合わせ