集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,800+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 650+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,100+ 製品 📁 インターフェースIC 3,100+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 450+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (38,000+)

PIC10F200-I/MC - 8-bit Flash MCU, 384B Flash, 4MHz, 8-DFN | Microchip
PIC10F200-I/MC

PIC10F200-I/MC - 8-bit Flash MCU, 384B Flash, 4MHz, 8-DFN | Microchip

The Microchip PIC10F200-I/MC is a low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontroller housed in an 8-pin DFN (2x3 mm) package. It features 384 bytes of Flash program memory (256 x 12 words), 16 bytes of RAM, and 4 MHz internal oscillator across a 2.0V to 5.5V operating range. The device uses a RISC architecture with 33 single-word/single-cycle instructions, giving an order-of-magnitude performance advantage over competing 8-bit microcontrollers in its class. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates a CPU, RAM, non-volatile program memory, and I/O peripherals into a single IC. Within the broader taxonomy, the PIC10F200 sits in the lowest-pincount tier of 8-bit microcontrollers, classified as an ultra-small Flash MCU; it is a sub-class of microcontrollers, which in turn belong to microprocessors, which belong to integrated circuits and finally to semiconductors. The PIC10F200 family is designed for applications that need real microcontroller functionality at the cost of a discrete logic IC, replacing 555 timers, op-amp sequencers, and small logic packages with programmable intelligence. Key features of the PIC10F200-I/MC include an internal 4 MHz oscillator, 4-bit digital I/O, one 8-bit timer, a Watchdog Timer with on-chip RC oscillator, in-circuit serial programming (ICSP), and Power-on Reset. The device operates from -40C to +85C industrial temperature range, draws microampere-level supply current, and supports CMOS/TTL-compatible I/O. The 8-DFN (Dual Flat No-lead) package measures only 2 mm x 3 mm, making it one of the smallest microcontrollers in volume production. Typical applications include logic-chip replacement (small glue-logic functions), battery chargers, LED flashers, timer substitutes for 555 circuits, sensor-conditioning front-ends, and ultra-low-cost consumer products such as toys and personal-care devices. Four I/O pins provide enough flexibility for most simple sequencing or PWM-style tasks. When designing with this MCU, note that code execution is single-cycle at 4 MHz, giving 1 us instruction time (branches take 2 cycles). Programming is performed through ICSP using two pins (GP0/GP1), which must be accessible on the PCB. Designers upgrading to PIC10F202/204/206 should verify pinout compatibility carefully, as the larger siblings add features but share the same DFN footprint. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the manufacturer datasheet and authorized distributor listings.

見積もり お問い合わせ
PIC10F200-I/P - 8-bit 4MHz 384B Flash MCU 8-PDIP | Microchip
PIC10F200-I/P

PIC10F200-I/P - 8-bit 4MHz 384B Flash MCU 8-PDIP | Microchip

The Microchip Technology PIC10F200-I/P is a 6-pin (8-PDIP pinout) 8-bit Flash-based CMOS microcontroller delivering 384 bytes of program memory, 16 bytes of RAM, and 4 I/O pins in an 8-pin PDIP through-hole package. The device executes instructions at 4 MHz from its internal 4 MHz RC oscillator and consumes only a few hundred microamperes in active mode for ultra-low-power embedded applications. The "-I" suffix designates an industrial temperature grade of -40C to +85C, while the "/P" suffix denotes the PDIP-8 package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable I/O peripherals. The PIC10F200 belongs to Microchip's 8-bit PIC10F family - the smallest, lowest-cost microcontrollers in the PIC architecture - designed for logic replacement, simple sequencing, and glue logic applications. It employs a RISC architecture with 33 single-word/single-cycle instructions, giving it code density and deterministic execution that outperforms many 8051-class competitors. Within the broader component taxonomy, the PIC10F200 is a microcontroller -> 8-bit MCU -> embedded controller -> semiconductor IC. Key features include 384 bytes of Flash program memory (256 x 12-bit words), 16 bytes of SRAM data memory, an 8-bit timer/counter, an internal 4 MHz oscillator (no external crystal required), wide operating voltage from 2.0V to 5.5V, in-circuit serial programming (ICSP), and a power-on reset with brown-out detection. The 8-PDIP package allows breadboard-friendly through-hole prototyping, which is unusual in this price-and-size class dominated by SOT-23-style surface-mount parts. The architecture combines a Harvard-style program/data memory split with a 12-bit instruction word, delivering typical 2:1 code compression versus 8-bit CISC alternatives. The internal 4 MHz RC oscillator eliminates external clock components while supporting calibration via the OSCCAL register. The single 8-bit timer (TMR0) with optional watchdog timer supports periodic wakeup and event-timing applications. The device supports in-circuit debugging through ICSP and an ICD interface. Typical applications include logic-replacement in appliances and consumer products, LED sequencing and blinking controllers, simple sensor signal conditioning, battery-powered devices, hardware sequencers, fan controllers, and toy electronics. Its 2.0V-5.5V operating range and sub-mA active current make it suitable for coin-cell and 2xAA battery designs. When designing with this part, mind the limitation of only 4 usable I/O pins (GP0-GP3), since pins 5-8 are shared with VDD, VSS, and ICSP functions. Always reserve one I/O for ICSP programming. The internal oscillator accuracy is typically ±1% after calibration, which may be insufficient for UART timing without software compensation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineer-focused reference for selecting the PIC10F200-I/P across cost-sensitive embedded designs.

見積もり お問い合わせ
PIC10F200T-E/OT - 8-bit MCU, 384B Flash, SOT-23-6 | Microchip
PIC10F200T-E/OT

PIC10F200T-E/OT - 8-bit MCU, 384B Flash, SOT-23-6 | Microchip

The Microchip Technology PIC10F200T-E/OT is an 8-bit PIC microcontroller in a 6-pin SOT-23-6 surface-mount package with 384 bytes of Flash program memory, 16 bytes of RAM, and 4 I/O pins operating at 4 MHz from a 2.0V to 5.5V supply. The device is rated for the extended industrial temperature range of -40C to +125C and ships on a 3000-piece tape-and-reel carrier with a suffix code /OT denoting the SOT-23-6 package option. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, and programmable I/O peripherals. The PIC10F200 sits at the bottom of the 8-bit PIC family hierarchy - microcontroller -> 8-bit MCU -> PIC10 family -> low-cost Flash MCU - and is engineered for applications where BOM cost, PCB area, and predictable performance outweigh raw throughput. Its RISC architecture executes 33 single-cycle (1 us at 4 MHz) instructions from a 12-bit-wide instruction word, delivering roughly 2:1 code density over competing 8-bit cores. Key features include an internal 4 MHz oscillator with no external components required, three usable I/O pins plus one input-only pin (GP3), an 8-bit timer/counter (TMR0) with watchdog, in-circuit serial programming (ICSP), code protection, and an ultra-low 100 nA sleep current for battery-powered duty-cycled designs. The SOT-23-6 footprint is one of the smallest MCU packages available, enabling direct replacement of discrete 555-timer or logic-gate circuits in space-constrained products. The architecture is built around a Harvard-style CPU with separate program and data buses, eight-level hardware stack, and a single-cycle instruction fetch pipeline. This deterministic execution model simplifies real-time firmware, while the wide 12-bit instructions pack more work into each Flash word - reducing total Flash consumption and enabling the 384-byte program budget to host meaningful control loops. Typical applications include LED blink and chase controllers, battery status indicators, appliance timer replacements for 555 circuits, charger indicator logic, toy sound sequencers, and small-sensor interfaces. The wide 2.0V to 5.5V supply range allows direct connection to single-cell Li-ion, two-cell alkaline, or 5V regulated rails without level translation. Designers should note that only three pins (GP0, GP1, GP2) are bidirectional; GP3 is input-only and pin 1 is reserved for ICSP. A 100 nF decoupling capacitor as close as possible to VDD is mandatory, and unused I/O must be configured as outputs low to minimize sleep current. This page consolidates verified distributor pricing, drop-in compatible SOT-23-6 alternatives, and design notes that go beyond the manufacturer datasheet to help engineers evaluate the PIC10F200T-E/OT quickly.

見積もり お問い合わせ
PIC10F202-E/P - 8-Bit 4MHz 768B Flash MCU | Microchip
PIC10F202-E/P

PIC10F202-E/P - 8-Bit 4MHz 768B Flash MCU | Microchip

The Microchip Technology PIC10F202-E/P is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller housed in an 8-pin PDIP through-hole package. It features 768 bytes of Flash program memory (512 x 12 words), 24 RAM bytes, 4 MHz internal oscillator, and 4 I/O pins. According to Microchip product page data, the device operates across a 2.0V to 5.5V supply range and delivers 33 single-word/single-cycle RISC instructions for compact, deterministic code execution. A Flash microcontroller is a self-contained computing IC that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and peripherals on a single die. The PIC10F202 belongs to the 8-bit microcontroller family in the broader category of microcontrollers (MCU) within integrated circuits, sitting under the RISC architecture umbrella and optimized for cost-sensitive embedded control. Compared to competing 8-bit CISC architectures in the same price bracket, the PIC10F202 delivers roughly an order-of-magnitude higher MIPS performance due to its 1-instruction-per-cycle pipeline, with most instructions executing in 1 us at 4 MHz. Key differentiating features include 6 I/O lines shared with 4 I/O functions (one input-only pin, one output-only pin, two bidirectional), one 8-bit timer (Timer0), a watchdog timer with on-chip RC oscillator, an internal 4 MHz calibrated oscillator, and in-circuit serial programming (ICSP) capability. The device draws a typical active current under 1 mA at 4 MHz and supports a power-saving Sleep mode with wake-up on pin change. It is rated for the -40C to +125C extended industrial temperature range as indicated by the -E suffix. Architecturally, the PIC10F202 uses a Harvard-style RISC core with a 12-bit wide instruction word, providing 2:1 typical code compression versus competing 8-bit MCUs in its class. Its 4 MHz internal oscillator eliminates external clock components, reducing BOM cost and PCB area. A precision bandgap reference and on-chip POR/Brown-out Reset (BOR) improve system reliability in noisy industrial environments. Typical applications include low-cost consumer appliances, battery-powered devices, LED lighting controllers, simple sensor interfaces, and automotive accessory modules. The wide operating voltage and industrial temperature range also make it suitable for harsh-environment sensor conditioning and IoT edge nodes. In -E/P form it is supplied in a through-hole PDIP-8 package suited for prototyping, breadboarding, and field-replaceable designs. When designing with this part, note that the 4 I/O pins are shared with GP0, GP1, GP2, GP3 and the output-only GP4/GP5 functions; GP3 is input-only. The device lacks an analog comparator or ADC, so applications requiring analog signal acquisition need an external ADC companion. Programming is performed via ICSP using the ICSPCLK/ICSPDAT pins shared with GP0/GP1. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found on a single manufacturer datasheet page.

見積もり お問い合わせ
PIC10F202-I/P - 8-bit Flash MCU, 768B, 4MHz, 8-PDIP | Microchip
PIC10F202-I/P

PIC10F202-I/P - 8-bit Flash MCU, 768B, 4MHz, 8-PDIP | Microchip

The Microchip Technology PIC10F202-I/P is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin PDIP through-hole package. It features 768 bytes of Flash program memory (512 x 12 words), 24 bytes of RAM, 4 MHz internal oscillator, and 4 I/O pins, with an industrial operating temperature range of -40C to +85C. The device operates from 2.0V to 5.5V and carries AEC-Q100 automotive qualification per the datasheets.com parametric record. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals onto one die. The PIC10F202 belongs to the 8-bit MCU category, which sits below 32-bit microcontrollers in compute complexity but excels in cost, deterministic real-time response, and ultra-low pin-count packages. Within Microchip's portfolio, the PIC10F family represents the smallest-footprint 8-bit PIC microcontrollers, designed for glue logic replacement and space-constrained analog/digital control. The PIC10F202 uses a RISC architecture with 33 single-word, single-cycle instructions, providing an order-of-magnitude performance advantage over competitors in the same price category. Key features include an internal 4 MHz precision oscillator eliminating external crystal requirements, four bidirectional I/O pins with individual direction control, an 8-bit timer with prescaler, and an analog comparator module. The Flash-based program memory supports in-circuit serial programming (ICSP) for field updates. The WDT, Power-on Reset, and Brown-out Detection circuitry provide robust autonomous operation. With only 6 active pins and a 1 us instruction cycle, the PIC10F202 replaces discrete logic and small ASICs in cost-sensitive designs. Typical applications include automotive subsystems requiring AEC-Q100 qualification, consumer appliance controls, LED lighting drivers, sensor signal conditioning, and IoT edge nodes. The industrial temperature grade and wide operating voltage make it suitable for both battery-powered portable devices and 5V industrial rails. When designing with this device, allocate the GP0-GP3 pins carefully because only 4 I/O are available. Use ICSP for firmware provisioning and reserve the MCLR pin as a reset input with the proper pull-up topology. The internal 4 MHz oscillator has +/- 1% accuracy over voltage and temperature, adequate for UART bit-banging but tight for CAN or USB timing.

見積もり お問い合わせ
PIC10F202T-E/OT - 8-Bit 4MHz 768B Flash MCU | Microchip | SOT-23-6
PIC10F202T-E/OT

PIC10F202T-E/OT - 8-Bit 4MHz 768B Flash MCU | Microchip | SOT-23-6

The Microchip Technology PIC10F202T-E/OT is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in a 6-pin SOT-23-6 package, delivering 4 MHz CPU performance with 768 bytes (512 x 12 words) of program Flash and 24 bytes of RAM in one of the industry's smallest microcontroller footprints. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripherals. Within the semiconductor taxonomy, the PIC10F202T-E/OT belongs to the 8-bit microcontroller family -> RISC architecture microcontroller -> embedded controller -> semiconductor IC. It uses a 12-bit instruction word and executes 33 single-word/single-cycle instructions, with all instructions completing in 1 µs (except program branches, which take 2 µs). The device supports an operating voltage range of 2.0 V to 5.5 V, making it compatible with both 2.5 V/3.3 V and 5 V system rails. Key features include an internal 4 MHz RC oscillator (no external crystal required), 3 general-purpose I/O pins (GP0, GP1, GP2) with individual direction control, an 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler, a watchdog timer with its own on-chip RC oscillator for reliable operation, and in-circuit serial programming (ICSP) capability. Power management features include low-power sleep mode, internal weak pull-ups, and configurable I/O wake-up-on-change. The integrated Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external reset circuitry. The PIC10F202 architecture leverages Microchip's enhanced mid-range core with single-cycle instruction execution, providing approximately 2:1 code compression compared to competing 8-bit MCUs. The Harvard-style separate program and data buses allow simultaneous instruction fetch and data access. In-circuit debugging is supported via the ICD interface on dedicated pins, although the small 6-pin package limits debug availability on the smallest variants. Typical applications include low-cost consumer electronics (toys, remote controls, personal care devices), LED lighting controllers, battery chargers, sensor signal conditioning, simple motor control (small fans, vibration motors), and automotive AEC-Q100 subsets (interior lighting, seat controls, accessory modules) where minimal PCB footprint and low unit cost are paramount. The wide 2.0 V to 5.5 V supply range also suits single-cell lithium-ion and two-cell alkaline battery-powered designs. When designing with the PIC10F202T-E/OT, careful pin allocation is essential because the 6-pin SOT-23-6 package exposes only 4 functional I/O/ICSP pins after VDD and VSS. The GP3 pin is input-only and used for ICSP/MCLR, while GP0, GP1, and GP2 are bidirectional. For designs requiring more I/O or peripherals, consider migrating to the pin-compatible PIC10F322 family, which offers more memory and peripherals in the same SOT-23-6 footprint. This page synthesizes distributor pricing, drop-in alternatives from the PIC10F200/PIC10F204/PIC10F220 family, and practical design notes not consolidated in the Microchip datasheet, helping engineers select the right 6-pin Flash MCU for cost-sensitive embedded designs.

見積もり お問い合わせ
PIC10F202T-I/OT - 8-Bit MCU, 768B Flash, 4MHz, SOT-23-6 | Microchip
PIC10F202T-I/OT

PIC10F202T-I/OT - 8-Bit MCU, 768B Flash, 4MHz, SOT-23-6 | Microchip

The Microchip Technology PIC10F202T-I/OT is a 6-pin, 8-bit, fully-static, Flash-based CMOS microcontroller in the PIC10F family, packaged in an industrial-temperature SOT-23-6 (OT) surface-mount form factor. It integrates 768 bytes of Flash program memory, 24 bytes of SRAM data memory, 4 MHz internal oscillator, a 3-channel 8-bit A/D-free comparator, and 4 user-configurable I/O pins in a die small enough to fit behind the world's smallest microcontroller pin count. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O on one silicon die. The PIC10F202 belongs to the 8-bit microcontroller category, using a RISC architecture with 33 single-word/single-cycle instructions. Within the broader taxonomy, the PIC10F202 sits under 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC, occupying the cost-optimized end of the embedded-control market where PCB area and BOM cost dominate design decisions over raw compute performance. Key features include 4 MHz operation (1 µs instruction cycle at 4 MHz FOSC), 2.0V to 5.5V wide operating voltage range, ultra-low power consumption suitable for battery applications, an 8-bit timer/counter (TMR0), a watchdog timer (WDT) with on-chip RC oscillator, in-circuit serial programming (ICSP) via two pins, and 4 bidirectional I/O pins (GP0-GP3). The SOT-23-6 package measures approximately 2.9 mm × 1.6 mm with a max height of 1.0 mm, making it one of the smallest microcontrollers available for mass-production designs. Technical depth: The PIC10F202's RISC core executes one instruction per clock cycle (except branches, which take two), and the 12-bit instruction word yields typical 2:1 code compression versus competing 8-bit CISC architectures. Internal oscillator accuracy is calibrated to within ±1% (typical) at 25°C/5V, eliminating external crystal components and freeing all 6 pins for user I/O or programming. Typical applications include low-cost consumer device logic replacement (discrete logic-to-MCU migration), LED blinkers, simple sensor interfaces, battery-powered toys, and any high-volume cost-sensitive embedded control task. Industrial -40°C to +85°C temperature range supports factory automation peripherals. When designing with this part, always include a 0.1 µF decoupling capacitor as close to VDD as possible, keep GP0 and GP1 traces short for reliable ICSP programming in-circuit, and verify unused-pin configuration (GP3 is input-only, no output driver). Programming requires Microchip's MPLAB X IDE with PICkit or ICD tool support. This page synthesizes distributor stock levels, drop-in alternatives, and design considerations not aggregated on the manufacturer datasheet alone.

見積もり お問い合わせ
PIC10F204-E/MC - 8-bit Flash MCU, 384B, 4MHz, DFN-8 | Microchip
PIC10F204-E/MC

PIC10F204-E/MC - 8-bit Flash MCU, 384B, 4MHz, DFN-8 | Microchip

The Microchip Technology PIC10F204-E/MC is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller in a 6-pin-equivalent 8-VFDFN Exposed Pad package (MC suffix) that delivers 384 bytes of Flash program memory, 16 bytes of SRAM, and 4 I/O pins at speeds up to 4 MHz. It features a RISC architecture with only 33 single-word/single-cycle instructions, all executing in 1 microsecond at 4 MHz except program branches which take two cycles, providing an order-of-magnitude performance advantage over competitive 8-bit microcontrollers in the same price tier. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a single-chip computer that integrates a CPU, non-volatile Flash program memory, SRAM, and peripherals onto one die and executes instructions on 8-bit-wide data paths. The PIC10F204 belongs to the PIC10F family of 6-pin baseline microcontrollers (PIC -> 8-bit microcontroller -> microcontroller -> semiconductor -> integrated circuit), optimized for low-cost, low-pin-count embedded control where the smallest possible footprint outweighs the need for advanced peripherals. Key features include a wide 2.0V to 5.5V operating voltage range, an internal 4 MHz RC oscillator (no external crystal needed), one analog comparator with absolute reference, 8-bit timer TMR0 with 8-bit programmable prescaler, and a comparator module. The device includes an In-Circuit Serial Programming (ICSP) interface that allows programming after PCB assembly, plus Microchip's nanoWatt Technology power management with idle and sleep modes that drop current consumption below 100 nA in sleep. Architecturally the PIC10F204 uses a Harvard-style RISC core with a 12-bit-wide instruction word, achieving typical 2:1 code compression over other 8-bit MCUs. Its CMOS Flash process allows field re-programmability with 100K endurance cycles minimum and 40-year data retention, while a 256 x 12 program memory layout maps directly onto the 384-byte Flash array. Typical applications include battery-powered sensor nodes, LED drivers and blinkers, simple fan/relay controllers, AC line zero-crossing detectors, and disposable consumer devices where cost dominates. The 8-VFDFN package with exposed thermal pad enables compact surface-mount designs. When designing with this part, choose between the -E (extended -40C to +125C) and -I (industrial -40C to +85C) temperature grades based on the deployment environment, and reserve at least one I/O pin for ICSP programming access during board bring-up. This page synthesizes distributor pricing, verified drop-in alternatives within the same DFN-8 footprint, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC10F204-E/P - 8-Bit Flash MCU, 384B, 4MHz | Microchip
PIC10F204-E/P

PIC10F204-E/P - 8-Bit Flash MCU, 384B, 4MHz | Microchip

The Microchip Technology PIC10F204-E/P is an 8-bit, fully static, Flash-based CMOS PIC microcontroller with 384 bytes of program memory (256 x 12 words), 16 bytes of data RAM, and 3 general-purpose I/O pins, clocked at up to 4 MHz from an internal oscillator and packaged in an 8-pin PDIP. It operates from 2.5 V to 5 V and carries the -E extended-temperature grade. An 8-bit microcontroller such as the PIC10F204 is a complete computing element: a CPU core, program Flash, working data RAM, I/O ports, and oscillator all integrated on one chip. Within the product hierarchy it sits at the lowest-cost tier of embedded processing, below 16-bit and 32-bit MCUs, where the design goal is minimal component count and minimal board area for simple control, sensing, and signal-shaping tasks rather than high-throughput computation. Key features of the PIC10F204-E/P include a RISC core with only 33 single-word, single-cycle instructions, a 12-bit wide instruction word that typically yields 2:1 code compression over competing 8-bit architectures, a fully static design that holds state in low-power operation, and an on-chip internal oscillator that eliminates an external crystal or resonator. The device operates across a 2.5 V to 5 V supply range, giving design headroom for both 3.3 V and 5 V systems. Technically, the PIC10F204 executes single-cycle instructions in approximately 1 us at 4 MHz, with only program branches taking a second cycle. Program memory is organized as 256 words of 12 bits, while the data RAM is organized as 16 x 8 bits, which defines how much working state a design can hold. Because the core is fully static, the instruction clock can be stopped without losing register contents, a feature used for wake-on-activity designs. Typical uses include low-cost on/off control for appliances and lighting, small sensor and threshold modules, timer-based control for pumps and fans, battery-backed keypads and remote controls, and simple LED indicator or relay driver boards where only a handful of I/O pins and a few hundred bytes of code are required. Design guidance: keep the I/O pins close to their loads, add 100 nF decoupling at VDD, and remember that the 384-byte Flash budget fills quickly if you use library-heavy C code; the PIC10F204-I/P is the industrial-temperature option if you do not need -40 C to +125 C range. This page combines verified distributor data, drop-in alternatives, and design notes that are not consolidated in the manufacturer datasheet itself.

見積もり お問い合わせ
PIC10F204-I/MC - 8-bit Flash MCU, 4MHz, 384B | Microchip
PIC10F204-I/MC

PIC10F204-I/MC - 8-bit Flash MCU, 4MHz, 384B | Microchip

The Microchip Technology PIC10F204-I/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin DFN (2x3 mm) package. It features a RISC architecture with 33 single-word/single-cycle instructions, executes instructions in 1 µs except for program branches (2 cycles), and integrates 384 bytes of Flash program memory (256 x 12 words), 16 bytes of SRAM data memory, and an integrated 4 MHz internal oscillator. The device targets cost-sensitive, space-constrained embedded applications where minimal PCB area and low BOM count are priorities. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage and SRAM for data), and programmable I/O peripherals on one die. The PIC10F204 sits at the very small end of the 8-bit MCU taxonomy: microcontroller -> 8-bit MCU -> PIC10 family -> 6-/8-pin entry-level Flash MCU -> general-purpose embedded controller. Its Harvard RISC architecture separates program and data buses so the CPU can prefetch the next instruction while completing the current one, achieving near 1 MIPS/MHz deterministic throughput. Key differentiating specifications include a wide 2.0V to 5.5V operating voltage range supporting both 3.3V and 5V rails, an industrial -40C to +85C temperature grade (the "I" suffix), 4 selectable I/O pins (GPIO), an 8-bit timer/counter (TMR0) with a programmable prescaler, and an integrated watchdog timer with its own on-chip RC oscillator for reliable operation independent of the system clock. The 8-bit A/D converter is not present on this specific device; designers needing analog should step up to the PIC10F206 which adds a comparator. The PIC10F204 architecture is a fully static CMOS design with no minimum clock frequency requirement, allowing the controller to be stopped in software to save power. It supports in-circuit serial programming (ICSP) via two pins (GP0/GP1), enabling firmware updates after PCB assembly. The integrated 4 MHz internal oscillator eliminates the need for an external resonator and reduces BOM cost and PCB area in space-constrained designs such as appliance controls, sensor signal conditioning, lighting controllers, and simple battery-powered gadgets. Typical applications include low-end AC line voltage monitoring (with capacitive dropper supply), battery charger status indicators, RGB LED controllers, simple fan/thermostat controls, replacement of discrete logic in toy and hobby electronics, and low-cost consumer appliance user-interface boards. The 8-pin DFN package provides excellent thermal performance and minimal footprint for handheld devices. When designing with the PIC10F204, ensure the GP3 pin (input-only on most PIC10F2xx devices) is handled correctly and that the ICSP programming pins are accessible on the PCB. Programming requires Microchip's MPLAB X IDE with XC8 compiler or the legacy MPASM assembler; the toolchain is free. Engineers upgrading should note that the PIC10F204 is not pin-compatible with the PIC10F220 or PIC12F parts that have more pins.

見積もり お問い合わせ
PIC10F204-I/P - 8-Bit 4 MHz Flash Microcontroller | Microchip
PIC10F204-I/P

PIC10F204-I/P - 8-Bit 4 MHz Flash Microcontroller | Microchip

The Microchip Technology PIC10F204-I/P is a low-cost, fully static, 8-bit, Flash-based CMOS microcontroller with a 4 MHz performance level, 384 bytes of program memory, and four I/O pins in an 8-pin PDIP package. According to the manufacturer product page, its RISC architecture contains 33 single-word instructions; most execute in one cycle, while program branches require two cycles. The part combines compact code storage with deterministic execution for embedded control tasks. An 8-bit microcontroller is a programmable semiconductor that executes firmware and manages digital inputs, outputs, timers, and other peripherals. PIC10F204-I/P belongs to the Microchip PIC10F family, which sits within the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor product categories. Its fully static operation permits the processor to remain in a stable low-activity state when clocking is stopped, depending on the device configuration. Verified distributor information identifies 384 bytes of Flash organized as 256 words by 12 bits and four general-purpose I/O lines. The manufacturer describes a compact RISC instruction set with 33 instructions, reducing code-density and learning complexity for basic control products. At the stated 4 MHz operating point, the architecture supports straightforward timing for indicators, simple user interfaces, relay logic, sensing, and low-speed control loops. The exact operating voltage, memory-map details, oscillator options, reset behavior, I/O electrical limits, and peripheral configuration are not present in the supplied snippets. Those values are therefore marked as data needed rather than inferred. Designers should use the official Microchip documentation for those details before setting operating limits, compiling firmware, or laying out the PCB. PIC10F204-I/P is appropriate for basic embedded controllers, small sensor interfaces, LED status systems, compact automation controls, and low-power products where a small Flash MCU and through-hole package simplify prototypes or servicing. Through-hole DIP construction also supports educational breadboards and manually assembled control boards. A switching supply, crystal, or larger external circuit is not justified solely from the supplied 4 MHz figure; actual peripheral and clock requirements must be checked in the complete datasheet. For firmware development, use a programmer and toolchain supported by the selected PIC10F device family. Keep firmware within the verified 384-byte Flash limit and account for bootloader, configuration-word, and application-state requirements. Because only four I/O pins are listed, confirm that the intended interface, programming connector, indicator LEDs, and external controls fit the available pins. This page consolidates manufacturer architecture details, distributor identification, sourcing links, and design-oriented guidance. It distinguishes verified facts from missing electrical data, helping engineers evaluate PIC10F204-I/P for low-complexity embedded designs without assuming unverified specifications.

見積もり お問い合わせ
PIC10F204T-I/MC - 8-bit Flash MCU, 384B, 4MHz | Microchip
PIC10F204T-I/MC

PIC10F204T-I/MC - 8-bit Flash MCU, 384B, 4MHz | Microchip

The Microchip Technology PIC10F204T-I/MC is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller in a 6-pin SOT-23 package variant (8-pin DFN/MC option as listed) with 384 bytes of Flash program memory, 16 bytes of SRAM, and a 4 MHz internal oscillator, packaged in an 8-pin DFN (2x3 mm) form factor rated -40C to +85C industrial temperature range. It employs a RISC architecture with 33 single-word/single-cycle instructions, where all instructions execute in one cycle (1 us at 4 MHz) except program branches which take two cycles, delivering an order-of-magnitude higher performance than competitors in the same price category. The 12-bit wide instructions are highly symmetrical, producing a typical 2:1 code compression over other 8-bit microcontrollers in its class, reducing flash footprint and BOM cost in space-constrained designs. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The PIC10F family represents one of the smallest commercial 8-bit MCUs, suited for glue logic replacement, simple sensor reading, and stand-alone control tasks where a full microcontroller would be over-spec. Within the broader hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC10F204 specifically targets applications previously served by discrete logic or analog timers, now replaced by programmable silicon for flexibility and lower long-term cost. Key features include a 4 MHz precision internal oscillator (no external crystal required), 4-bit programmable prescaler, GP0/GP1/GP3 digital I/O pins, an 8-bit timer (TMR0) with 8-bit programmable prescaler, and a watchdog timer with on-chip RC oscillator for reliable operation without external components. The device operates from 2.0V to 5.5V across commercial and industrial temperature grades, supporting both 3.3V and 5V rails common in consumer and industrial products. Technical depth: the PIC10F204 uses a Harvard architecture with separate program and data buses, an 8-level hardware stack, and direct/indirect addressing modes. In-Circuit Serial Programming (ICSP) allows flash reprogramming without removal from the PCB, a critical feature for field updates and production-line calibration. The 6-pin variant (PIC10F204) and 8-pin DFN variant (PIC10F204T-I/MC, with two no-connect pins for footprint compatibility) share the same silicon die. Typical applications include consumer electronics (LED blinkers, toy controllers), appliance control (coffee makers, fan speed controllers), sensor conditioning, IR remote transmitters, and battery-powered devices. The wide voltage range and ultra-low power consumption make it suitable for IoT edge nodes, smart sensor tags, and wearable accessories. Design consideration: for new designs the PIC10F204T-I/MC requires only one bypass capacitor (typically 0.1 uF) and optionally a 10 kohm pull-up on the MCLR pin. The T suffix indicates tape-and-reel packaging for high-volume SMT assembly. The I suffix denotes the industrial temperature grade (-40C to +85C). For drop-in upgrades with more program memory, see the PIC10F206T-I/MC (768 B Flash) which is pin-compatible. This page synthesizes distributor pricing, parametric drop-in alternatives, and PCB-layout design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC10F206-E/P - 8-Bit 4MHz Flash MCU, 768B | Microchip
PIC10F206-E/P

PIC10F206-E/P - 8-Bit 4MHz Flash MCU, 768B | Microchip

The Microchip PIC10F206-E/P is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller from the PIC10F family, housed in an 8-pin PDIP through-hole package. It integrates a 4 MHz internal oscillator, 768 bytes (512 × 12) of Flash program memory, and 24 bytes of SRAM, delivering RISC performance with only 33 single-word/single-cycle instructions across 6 I/O-capable pins. The -E suffix indicates the Extended operating temperature range of -40 °C to +125 °C, suitable for industrial and harsh-environment applications. A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and programmable I/O peripherals, enabling embedded control of mechanical, sensing, or lighting systems without a separate processor. The PIC10F family sits at the ultra-low-end of the 8-bit microcontroller hierarchy: 8-bit MCU → RISC MCU → Flash-programmable MCU → small-footprint MCU → PIC10F sub-family. Despite its minimal pin count and memory, the PIC10F206 retains the Harvard RISC core, 12-bit instruction word, and typical 2:1 code compression that characterizes the broader PIC architecture, making it ideal for cost-sensitive volume production. Key features of the PIC10F206-E/P include an internal 4 MHz oscillator that eliminates external crystal cost, a wide operating voltage range of 2.0 V to 5.5 V, six general-purpose I/O pins, an 8-bit timer (TMR0), a watchdog timer with internal oscillator, in-circuit serial programming (ICSP) for field updates, and a comparator module. The device operates from a single supply and supports power-on reset with brown-out detect, simplifying external reset circuitry in space-constrained designs. The PIC10F206 uses a 12-bit instruction word with a Harvard bus architecture, achieving one-instruction-per-clock execution at 1 µs per instruction. Its Flash program memory supports >100,000 erase/write cycles and 40-year retention, well above consumer-product lifecycle requirements. The integrated comparator, configured via firmware, can be used for analog signal detection without external op-amps, supporting low-power standby operation. Current consumption is typically in the µA range in sleep mode, enabling battery-friendly designs. Typical applications include consumer appliance control, LED lighting drivers, remote control transmitters, low-end sensor signal conditioning, battery chargers, and small motor PWM drivers. The 4 MHz core and 24 bytes of RAM limit it to control tasks rather than user-interface rich applications, but the small footprint makes it ideal for cost-optimized designs where a single function replaces discrete logic. When designing with the PIC10F206-E/P, ensure ICSP programming pins (GP0/GP1) are accessible for in-circuit firmware updates. Use decoupling capacitors of 0.1 µF close to VDD, and verify the comparator input pin configuration matches the analog input range. The device ships in a standard 8-pin PDIP footprint compatible with hand-soldered prototypes and through-hole production. This page consolidates distributor pricing, pinout, drop-in alternatives, and design guidance not found in a single source on the manufacturer datasheet.

見積もり お問い合わせ
PIC10F206-I/MC - 8-Bit 4MHz 768B Flash MCU | Microchip
PIC10F206-I/MC

PIC10F206-I/MC - 8-Bit 4MHz 768B Flash MCU | Microchip

The Microchip Technology PIC10F206-I/MC is an 8-bit, fully-static, Flash-based CMOS microcontroller from the PIC® 10F family, delivered in an 8-pin DFN (2x3 mm) exposed-pad package. It integrates a 4 MHz internal oscillator, 768 bytes (512 x 12) of Flash program memory, and 24 bytes of RAM, providing compact deterministic control for cost-sensitive embedded designs. With only 33 single-word/single-cycle instructions, the core delivers 1 MIPS performance at 4 MHz and consumes only a few hundred microamps in active mode. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory, working RAM, and configurable I/O peripherals. The PIC10F206 belongs to the 8-bit microcontrollers category, the lowest tier of the embedded computing hierarchy (8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC). Within Microchip's portfolio it sits inside the PIC10F2xx sub-family, the smallest-footprint Flash PIC family, optimized for pin- and area-constrained designs that previously required discrete logic or ASICs. Key features include three general-purpose I/O pins, a precision 4 MHz internal oscillator (no external crystal required), in-circuit serial programming (ICSP), an 8-bit timer/counter (TMR0) with programmable prescaler, a watchdog timer with its own on-chip RC oscillator, and an integrated comparator module. The device operates over the industrial temperature range of -40C to +85C and accepts supply voltages from 2.0 V to 5.5 V, allowing direct connection to 2xAA batteries, 3.3 V or 5 V rails. Its 8-pin DFN package (2 mm x 3 mm) makes it one of the smallest general-purpose microcontrollers available, replacing dozens of discrete logic gates while adding programmability. The architecture uses a RISC-style Harvard design with a 12-bit wide instruction word, achieving roughly 2:1 code compression over typical 8-bit CISC cores in the same class. All instructions execute in a single instruction cycle (1 microsecond at 4 MHz) except program branches, which take two cycles. The Flash memory supports 10,000 erase/write cycles minimum and the device retains code for over 40 years, supporting field-upgradeable firmware via ICSP. Typical applications include battery-powered consumer accessories, LED color controllers, electronic toys, fan/lighting PWM control, simple sensor signal conditioning, and replacement of discrete logic in space-constrained products. The wide operating voltage and low cost make it a common choice in disposable IoT tags and high-volume consumer electronics. Designers should note that the device has only 6 usable pins (GP0-GP2 plus GP3/MCLR/VPP and VDD/VSS), so applications must be tightly resource-budgeted. Program memory must fit in 512 12-bit words, and the stack is only two levels deep, restricting interrupt nesting and subroutine depth. For designs needing more I/O, more memory, or peripheral sets such as ADC or PWM, step up to PIC12F or PIC16F families.

見積もり お問い合わせ
PIC10F206-I/P - 8-Bit 4MHz Flash MCU, 768B | Microchip
PIC10F206-I/P

PIC10F206-I/P - 8-Bit 4MHz Flash MCU, 768B | Microchip

The Microchip PIC10F206-I/P is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin PDIP through-hole package. It integrates a 4 MHz internal oscillator, 768 bytes of Flash program memory (512 x 12 words), 24 bytes of SRAM data memory, and a 6-bit ADC-like comparator peripheral, while presenting only 4 user I/O pins in this 8-pin PDIP form factor. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a single-chip computer built around an 8-bit data path and non-volatile Flash program memory, used to execute simple embedded control tasks. In the system hierarchy it sits below 16-bit and 32-bit MCUs in cost and complexity, but above pure hardware logic in flexibility, making it the workhorse of cost-driven consumer, industrial, and appliance products. The PIC10F family represents the smallest and most economical tier within Microchip's PIC portfolio. Key features include RISC architecture with 33 single-word/single-cycle instructions, 1 microsecond instruction execution at 4 MHz, an internal 4 MHz oscillator that eliminates external clock components, an integrated 6-bit analog comparator with 0.6V reference, and a wide 2.0V to 5.5V operating voltage range. The device consumes very low current in sleep mode, making it well suited to battery-powered or energy-harvesting designs. Technically the PIC10F206 uses a Harvard architecture with separate code and data buses, allowing instruction fetch and operand access in a single cycle. It supports in-circuit serial programming (ICSP), enabling firmware updates after PCB assembly and reducing manufacturing cost. The on-chip watchdog timer with its own on-chip RC oscillator adds robustness against code lockups in unattended applications. Typical applications include LED blinkers and decorative lighting, simple fan or pump controllers, low-end remote-control transmitters, battery chargers, sensor signal conditioning, and pin-compatible upgrades in designs originally based on PIC10F200, PIC10F202, or PIC10F204. The compact 8-pin PDIP form factor also simplifies breadboarding for hobby and education use. When designing with this part, remember that only 4 of the 8 pins are usable as general-purpose I/O because two pins are reserved for ICSP and one for VDD/MCLR sharing. Always reserve the ICSP clock and data lines for in-system programming access during prototyping. This page consolidates distributor pricing, drop-in alternatives within the PIC10F2xx family, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC10F220-E/MC - 8-bit Flash MCU, 384B, 8MHz, 8-DFN | Microchip
PIC10F220-E/MC

PIC10F220-E/MC - 8-bit Flash MCU, 384B, 8MHz, 8-DFN | Microchip

The Microchip Technology PIC10F220-E/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin DFN (2x3 mm) exposed-pad package. It combines 384 bytes of Flash program memory, 16 bytes of RAM, an 8 MHz internal oscillator, and a 12-bit ADC with up to 4 analog channels in a footprint barely larger than an SOT-23. According to the Microchip PIC10F220/222 datasheet (DS40001270F), it executes 33 single-word, single-cycle RISC instructions, with branches taking two cycles, delivering roughly 1 MIPS performance from a 4 MHz oscillator. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and one or more peripherals such as ADCs, timers, and communication interfaces. Within the broader hierarchy, the PIC10F220 belongs to the 8-bit MCU class, sits under the Microchip PIC10F family, and ultimately falls under embedded microcontrollers -> integrated circuits. Its 6-pin I/O capability makes it one of the smallest general-purpose Flash MCUs available. Key features include ultra-low-power operation with typical sleep current in the nanoampere range, an internal 8 MHz oscillator with calibration, an 8-bit timer/counter (TMR0) with a programmable prescaler, and a 12-bit ADC with up to 4 input channels multiplexed onto shared package pins. The wide 2.0 V to 5.5 V operating range supports battery-powered designs including single-cell Li-ion, two-cell AA, and 3.3 V regulated rails. A factory calibrated internal oscillator eliminates the need for an external resonator, saving both BOM cost and PCB area. Architecturally, the PIC10F220 uses a Harvard RISC core with separate program and data buses, single-cycle instruction execution (except program branches), and a 12-bit wide instruction word that achieves roughly 2:1 code compression versus typical 8-bit CISC architectures. The integrated 12-bit ADC provides finer resolution than the 8-bit ADCs found on many entry-level MCUs, making the device well-suited to sensor conditioning tasks where quantization error must be minimized. Typical applications include low-cost battery-powered sensor nodes, single-channel LED drivers, fan/relay controllers, toy electronics, smart cable replacements, wearable accessories, and cost-sensitive consumer white goods. Designers should pay particular attention to the 8-pin DFN exposed-pad requirement - the thermal pad must be soldered to the board ground pour to meet the package thermal and electrical ratings, and a minimum of 0.1 uF Vdd decoupling must be placed within a few millimetres of the supply pin. This page synthesizes distributor pricing, parametric comparison data, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. Information is current as of 2026-09-14.

見積もり お問い合わせ
PIC10F220-E/OT - 8-bit MCU, 384B Flash, 4 I/O, SOT-23-6 | Microchip
PIC10F220-E/OT

PIC10F220-E/OT - 8-bit MCU, 384B Flash, 4 I/O, SOT-23-6 | Microchip

The Microchip Technology PIC10F220-E/OT is an 8-bit, fully-static, Flash-based CMOS microcontroller in a 6-pin SOT-23-6 package, offering 384B (256 x 12) of Flash program memory, 16 x 8 bytes of RAM, and 4 I/O pins, running at a clock speed of 8 MHz with an internal oscillator. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on a single die. It belongs to the broader hierarchy of microcontrollers -> embedded controllers -> processors -> semiconductors. The PIC10F220 specifically sits at the entry level of the PIC® 10F family, the smallest-footprint 8-bit MCUs from Microchip, designed for cost- and space-constrained applications that still need Flash programmability and an analog-to-digital converter (ADC). Key features include RISC architecture with 33 single-word/single-cycle instructions (single-cycle execution at 1 µs except branches, which take two cycles), 12-bit wide instructions delivering roughly 2:1 code compression versus competing 8-bit MCUs, and an internal 8 MHz oscillator. The device integrates a small set of peripherals tuned for glue-logic replacement, including an 8-bit ADC and comparators. The SOT-23-6 footprint measures approximately 2.9 mm x 1.6 mm, enabling placement where even a SOIC-8 cannot fit. Technically, the PIC10F220 uses a Harvard architecture with separate program and data buses, which is why the Flash word is 12 bits wide (instruction-aligned) while the RAM is 8 bits wide (data-aligned). The internal 8 MHz oscillator is factory-trimmed, removing the need for an external crystal and reducing BOM cost. The 4 I/O pins are multiplexed with VDD, VSS, GP3 (input-only), and the ADC/comparator inputs, requiring careful pin assignment at firmware level. Typical applications include low-cost logic replacement in consumer and appliance products, LED blinkers and indicator controllers, battery chargers, simple sensor interfaces, and personal-care devices. The combination of Flash memory, an internal oscillator, and an SOT-23-6 footprint makes the part attractive for high-volume products where every square millimeter of PCB matters. A key design consideration is that this -E variant operates across the -40 °C to +125 °C extended temperature range. The 4 I/O limit means GPIO-heavy tasks are out of scope, and the 384B Flash budget constrains application complexity. The PIC10F322 is the recommended migration path when more memory or peripherals are needed. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that are not assembled in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC10F220-E/P - 8-bit Flash MCU, 384B, 4 I/O, 8MHz | Microchip
PIC10F220-E/P

PIC10F220-E/P - 8-bit Flash MCU, 384B, 4 I/O, 8MHz | Microchip

The Microchip Technology PIC10F220-E/P is an 8-bit, fully-static, Flash-based CMOS microcontroller in the PIC10F family, packaged in an 8-pin PDIP through-hole format. It integrates 384B (256 x 12) of program memory, 16B of RAM, and a 4-channel 8-bit A/D converter, all operating from a single internal oscillator up to 8 MHz. The device executes 33 single-word/single-cycle RISC instructions, delivering roughly 1 MIPS of compute throughput while consuming only a few hundred microamps of active current. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a small computer-on-a-chip built around an 8-bit data path, with non-volatile Flash program memory that can be re-written in-circuit. PIC microcontrollers occupy the microcontroller -> embedded controller -> semiconductor hypernym chain, and within that taxonomy the PIC10F family sits at the smallest, lowest-cost end for glue logic, timer, and simple analog sensing tasks. Key features include 4 user-configurable I/O pins on an 8-pin DIP, an internal 8 MHz oscillator (no external crystal required), 16 bytes of RAM, and an analog comparator plus an 8-bit A/D converter. The PIC10F220 specifically omits the PWM output that the closely related PIC10F222 provides, keeping the die minimal for cost-sensitive applications. The device operates across 2.0V to 5.5V, supports in-circuit serial programming (ICSP), and offers a brown-out reset and power-on reset. Architecturally, the PIC10F220 uses a Harvard RISC core with a 12-bit instruction word that achieves approximately 2:1 code compression versus typical 8-bit CISC alternatives. The integrated A/D converter samples up to 4 channels at 8-bit resolution, useful for direct sensor interfacing without external ADC chips. The wide operating voltage and low power make it a strong fit for battery and energy-harvesting designs. Typical applications include low-cost logic replacement, simple sensor interfaces (temperature, light, voltage monitoring), battery chargers, LED drivers, consumer appliance control, and standalone timers. Designers value the 8-pin PDIP for breadboard-friendly prototyping and hand-soldered rework in low-volume products. When designing with the PIC10F220-E/P, observe the 5.5V absolute maximum on VDD and ensure decoupling caps of 0.1 uF are placed as close to the supply pin as possible. Because only 4 I/O are available, pin function selection (digital I/O vs analog input vs reset) must be planned carefully during schematic capture. This page combines datasheet specifications, real distributor pricing, verified drop-in alternatives (with same-brand PIC10F family variants prioritized), and practical design notes that go beyond what the manufacturer datasheet provides.

見積もり お問い合わせ
PIC10F220-I/P - 8-bit MCU 384B Flash 8MHz | Microchip | DIP-8
PIC10F220-I/P

PIC10F220-I/P - 8-bit MCU 384B Flash 8MHz | Microchip | DIP-8

The Microchip Technology PIC10F220-I/P is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller in an 8-pin PDIP package. It features 384 bytes of Flash program memory (256 x 12 words), 16 bytes of SRAM, a 6-bit ADC, and executes instructions at 8 MHz with a 1 µs instruction cycle (except branches, which take two cycles). The RISC architecture provides only 33 single-word/single-cycle instructions, delivering an order of magnitude higher performance than competitors in the same price category. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and GPIO onto one die. Microcontrollers sit at the bottom of the embedded compute hierarchy: microcontroller -> embedded processor -> microprocessor -> CPU, and within the 8-bit MCU category they include subfamilies such as PIC10, PIC12, PIC16, PIC18, and ATtiny/ATmega. The PIC10F220 belongs to the PIC10F 6-pin/8-pin ultra-small-footprint family, optimized for analog-intensive, cost-driven applications where every GPIO and PCB square millimeter matters. Key features of the PIC10F220-I/P include an integrated 6-bit analog-to-digital converter (ADC), one 8-bit timer (TMR0), a watchdog timer with on-chip RC oscillator, power-on reset, in-circuit serial programming (ICSP), and an internal 4 MHz / 8 MHz oscillator that eliminates the need for an external crystal. The device supports a wide operating voltage range from 2.0V to 5.5V, making it compatible with both 3.3V and 5V rails common in consumer and industrial systems. The 12-bit-wide instruction set is highly symmetrical, producing a typical 2:1 code compression compared with other 8-bit microcontrollers in its class, so application code fits in less Flash and requires fewer fetches. Combined with Harvard-style separate program and data buses, the device delivers deterministic single-cycle execution on most instructions, which simplifies real-time control loops. Typical applications include appliance controls, LED driving, battery chargers, toys, simple sensor signal conditioning, and any cost-sensitive embedded system that needs an 8-bit brain in an 8-pin footprint. Engineers also deploy the PIC10F220 in auxiliary housekeeping roles where it acts as a power-sequence supervisor or PWM controller for a larger SoC. When designing with this part, note that the 8-pin PDIP package makes hand-prototyping and breadboard-friendly rework easy. The device shares its instruction set with the broader PIC10/12/16 family, so code written for the PIC10F220 ports to larger PICs with minimal modification, and the ICSP interface allows firmware updates without removing the chip from the board. This page synthesizes XAIPART pricing tiers, drop-in PIC10F2xx alternatives, and engineering design notes not found in the bare Microchip datasheet, giving buyers and embedded engineers a single decision-ready reference.

見積もり お問い合わせ
PIC10F220T-E/OT - 8-Bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip
PIC10F220T-E/OT

PIC10F220T-E/OT - 8-Bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip

The Microchip PIC10F220T-E/OT is an 8-bit, fully-static Flash-based CMOS microcontroller in a 6-pin SOT-23-6 surface-mount package, delivering 8 MIPS performance from a 33-instruction RISC core with 384 bytes of program memory (256 x 12 words) and 16 bytes of data RAM. It operates across an extended industrial temperature range of -40C to +125C, making it suitable for harsh-environment consumer and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one die. Within the taxonomy, the PIC10F220 belongs to the 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor hierarchy. Its tiny 6-pin SOT-23 footprint positions it as a minimal-pin-count MCU sub-category, ideal for replacing discrete logic gates or analog timers in space-constrained designs. Key features include a 4-channel 8-bit Analog-to-Digital Converter (ADC) with external and internal voltage references, one 8-bit timer (Timer0), an MCLR reset input, GPIO, and 16 bytes of RAM supporting up to 4 MHz internal oscillator operation. The device operates from 2.0V to 5.5V supply voltage, has 4 I/O pins, and includes Flash program memory that can be written thousands of times. Low-power consumption makes it ideal for battery-powered and energy-harvesting applications. Technically, the PIC10F220 employs a Harvard architecture with separate program and data buses, enabling single-cycle instruction execution except for program branches (2 cycles). The Flash memory uses 12-bit-wide instruction words, providing 2:1 code compression over competing 8-bit architectures, and supports in-circuit serial programming (ICSP) for field upgrades. Typical applications include LED lighting controllers, battery chargers, smart sensors, simple motor control, and consumer appliance interfaces. The extended -40C to +125C temperature range also enables automotive and industrial sensor signal conditioning modules. Design consideration: when selecting this part, ensure that 4 GPIO pins are sufficient for your application - the PIC10F220 is intentionally minimal and requires pin multiplexing for complex interfaces. For applications needing more I/O, consider PIC12F or PIC16F families. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a 360-degree view for procurement and engineering teams evaluating the PIC10F220T-E/OT.

見積もり お問い合わせ
PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip
PIC10F220T-I/MC

PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip

The Microchip Technology PIC10F220T-I/MC is a low-cost, high-performance, 8-bit, fully-static Flash-based CMOS microcontroller in a 6-pin/8-pin DFN (2x3 mm) package. It executes 33 single-word/single-cycle RISC instructions at 8 MHz, providing 8 MIPS throughput with most instructions completing in 1 us and program branches in 2 us. The device integrates 384 bytes of Flash program memory (256 x 12 words), 16 bytes of RAM, and a 6-channel 8-bit A/D converter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals into one package. Within the broader taxonomy, the PIC10F220 belongs to the 8-bit microcontroller hypernym, the PIC10F family, and the Microchip PIC10F2xx sub-family. It is purpose-built for glue-logic replacement, logic-level translation, and ultra-compact analog or digital control nodes where board area and BOM cost dominate the design. Key features include 4 MHz internal oscillator calibration within +/-1 percent, an 8-bit timer/counter (TMR0), a watchdog timer with on-chip oscillator, an 8-bit A/D converter with up to 6 input channels, and an in-circuit serial programming (ICSP) interface. The device operates across 2.0V to 5.5V, with a 1.8V brown-out-reset option, and supports industrial -40C to +85C temperature range. The I suffix confirms the industrial operating range; the T suffix denotes tape-and-reel packaging. The PIC10F220 employs a RISC Harvard architecture with separate program and data buses, a 12-bit instruction word, and a deterministic two-stage pipeline. A comparator and internal voltage reference (0.6V nominal) are integrated for analog signal conditioning without external components. Power management features include an ultra-low-power sleep mode with wake-on-change I/O and selectable oscillator modes for system-level energy optimization. Typical applications include consumer-electronics remote controls, battery chargers, LED driver controllers, sensor signal conditioning, low-power security sensors, and industrial control logic. The combination of 6 I/O pins, integrated ADC, and tiny DFN package makes it ideal for space-constrained designs. When designing, ensure decoupling caps are placed close to VDD, avoid using GP3 as input only (it is input-only), and leverage the internal 4 MHz oscillator to minimize external component count. Consider the newer PIC10F322 for new designs, which adds more memory, PWM, and a CWG. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop source for sourcing and design-in decisions.

見積もり お問い合わせ
PIC10F220T-I/OT - 8-bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip
PIC10F220T-I/OT

PIC10F220T-I/OT - 8-bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip

The Microchip Technology PIC10F220T-I/OT is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in a 6-pin SOT-23-6 surface-mount package. It features 384 bytes of Flash program memory (256 x 12 words), 16 bytes of RAM, an 8 MHz internal oscillator, and a 12-I/O architecture implemented across six external pins. The device executes 33 single-word/single-cycle RISC instructions and operates from 2.0 V to 5.5 V across the industrial -40 C to +85 C range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. Within the broader category, the PIC10F family represents the smallest-footprint members of Microchip's 8-bit PIC portfolio, designed for cost-sensitive applications where PCB area is at a premium. Their hypernyms include: microcontroller -> embedded controller -> semiconductor device. The PIC10F220 belongs to the mid-2020s "10F" lineage (PIC10F200/202/204/206/220/222) and shares die architecture with siblings that add ADC, comparator, or more memory. Key features of the PIC10F220 include an 8 MHz internal oscillator (4 MIPS throughput at 2:1 divider-free pipeline), in-circuit serial programming (ICSP), a watchdog timer with its own on-chip RC oscillator, and power-on reset. Its ultra-compact SOT-23-6 outline enables drop-in use in tight layouts such as in-line cable assemblies, SMD LEDs with logic, and appliance subsystems. Power-saving SLEEP mode draws nanoamp-level current, suiting battery-powered or energy-harvesting designs. Technically, the PIC10F220 uses a Harvard RISC architecture with separate program and data buses, which allows instruction fetch and operand access in a single clock cycle. Its 12-bit-wide instruction word and 8-bit data path deliver typical 2:1 code compression over competitive 8-bit CISC alternatives. The 6-pin limitation forces designers to multiplex I/O, typically using GP0/GP1 as ICSP, GP3 as reset-only input, and GP2/GP4/GP5 for application logic. Typical applications include LED blinkers, consumer IR remote controls, PWM fan tachometers, electronic fuses, in-line cable repeaters, and simple logic replacements. The wide 2.0 V-5.5 V supply range also enables direct 2xAA, CR2032, or USB-derived 5 V rails. When migrating, note that PIC10F220T-E/OT is the extended-temperature variant (-40 C to +125 C) in the same SOT-23-6 package, while PIC10F220-I/P is the DIP-8 version with two extra I/O lines. For design-in, ensure the ICSP pins (GP0/GP1) are accessible on the PCB for in-circuit programming, and use the MCLR/GP3 pin as a reset input. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the official Microchip datasheet.

見積もり お問い合わせ
PIC10F222-E/MC - 8-bit Flash MCU 768B 4 I/O 8DFN | Microchip
PIC10F222-E/MC

PIC10F222-E/MC - 8-bit Flash MCU 768B 4 I/O 8DFN | Microchip

The Microchip PIC10F222-E/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller built around a RISC architecture with 33 single-word, single-cycle instructions (1 µs per instruction at 4 MHz, except program branches which take two cycles). It integrates 768 bytes of Flash program memory, 23 bytes of RAM, a 4-channel 8-bit A/D converter, and four I/O pins in an 8-pin DFN (MC) exposed-pad package. The device supports operating voltages of 2.0V to 5.5V and internal oscillator options of 4 MHz and 8 MHz, with the -E (Extended) temperature grade spanning -40 °C to +125 °C. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates a CPU, RAM, non-volatile program memory (Flash), peripherals and I/O on a single die. Within the broader semiconductor hierarchy, MCUs sit inside the microcontroller product class, which in turn belongs to the integrated circuit family of digital logic devices used for embedded control. The PIC10F222 belongs to Microchip's PIC10 baseline family, which is the smallest-footprint branch of the PIC architecture tree, optimized for cost-sensitive and space-constrained applications where the design needs a small amount of intelligence with very few external pins. Key differentiating features include 33 single-cycle RISC instructions (compared with typically 35-50 instructions in CISC competitors in the same price band), 2:1 code compression relative to other 8-bit MCUs in its class, an integrated 8-bit ADC eliminating the need for an external converter, and four I/O lines plus one input-only GP3 line. The Flash memory enables in-system reprogramming via ICSP, supporting fast customization of application parameters such as transmitter codes, appliance settings, and receiver frequencies without removing the device from the board. The PIC10F222's architecture uses a 12-bit wide instruction word with Harvard-style separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. This pipeline delivers an effective throughput of approximately 4 MIPS at 4 MHz and 8 MIPS at 8 MHz, and the device operates fully statically (no minimum clock), enabling low-power sleep currents well-suited for battery-powered applications. The integrated 8-bit ADC with up to four input channels simplifies designs that need to measure analog signals such as light, temperature (via a thermistor), or potentiometer positions without external conversion hardware. Typical applications include adding intelligence to LED lighting systems, low-cost remote-control transmitters, small appliance controllers, battery chargers, and consumer electronics such as toys and decorative lighting. The device's small footprint and low pin count make it well suited for designs where PCB real estate is at a premium but some level of programmable logic is required beyond simple discrete or analog circuitry. When designing with the PIC10F222, ensure that the exposed pad (EP) of the DFN package is soldered to the board ground plane for proper thermal dissipation and electrical performance. Decoupling capacitors of 0.1 µF should be placed as close as possible to the VDD pin, and unused I/O pins should be configured as outputs low or inputs with internal weak pull-ups to minimize power consumption in sleep mode. This page synthesizes distributor pricing, drop-in alternatives within the PIC10F family, and practical design notes that go beyond the standard Microchip datasheet content, providing engineers and procurement teams with a one-stop decision matrix for the PIC10F222-E/MC.

見積もり お問い合わせ
PIC10F222-E/P - 8-Bit 8MHz Flash MCU | Microchip Technology
PIC10F222-E/P

PIC10F222-E/P - 8-Bit 8MHz Flash MCU | Microchip Technology

The Microchip Technology PIC10F222-E/P is a low-cost, 8-bit, flash-based CMOS microcontroller with a maximum clock frequency of 8 MHz, 768 bytes of program memory, 16 bytes of RAM, and an 8-pin through-hole DIP package. It uses the PIC10 RISC core with 33 single-word, single-cycle instructions, making it suitable for compact embedded-control products that need inexpensive programming, reconfigurable logic, and analog-to-digital conversion. A microcontroller is a programmable semiconductor system that integrates a CPU core, program memory, data memory, and peripherals on one chip. The PIC10F222 belongs to the Microchip PIC10 family and combines a general-purpose 8-bit microcontroller architecture with flash-based configuration storage. Its fully static CMOS implementation is appropriate for embedded products that operate from a fixed supply and must maintain deterministic low-power behavior between external events. The principal features of the PIC10F222-E/P include an 8-bit CPU, 33 RISC instructions, a 20-word program memory page structure, 768 bytes of flash program memory, and 16 bytes of data RAM. The device includes one 8-bit Analog-to-Digital Converter, four general-purpose I/O pins, a general-purpose input pin, and a multifunction MCLR/VPP pin. These resources allow a compact controller to combine digital control and analog measurement without requiring a separate ADC. The CPU executes most instructions in one cycle, corresponding to 1 microsecond at the 8 MHz operating frequency. Program branches require two cycles, and the 12-bit instruction word provides code density for a small embedded controller. The flash-based architecture allows application firmware and configurable control parameters to be programmed or rewritten according to Microchip's programming specifications, supporting product customization and field updates where the end application permits reprogramming. Typical uses include compact appliance controls, simple sensor interfaces, low-cost timers, LED sequencers, small motor or relay-control systems, battery-operated products, and general-purpose embedded-control boards. The PIC10F222-E/P is especially appropriate when a PCB requires a through-hole package, modest processing capacity, one ADC channel, and only a small number of I/O lines. The LCSC listing identifies the device as an 8-bit MCU and reports availability from $0.3689 in stock, subject to market movement. Designers should preserve the MCLR/VPP behavior required by the selected programming method and confirm the oscillator, reset, and I/O configuration against the manufacturer data sheet before layout release. Because this is an 8-pin device with four general-purpose I/O pins, pin multiplexing must be checked in software. PCB artwork should follow the official 8-pin DIP footprint, and production programming should use the manufacturer's validated programming specification. This page consolidates verified manufacturer and distributor information, separates the target grade from related catalog entries, identifies the verified 8 MHz, flash, RAM, package, and ADC characteristics, and explains where exact pin, packaging, and procurement data must still be confirmed. It also records the available same-family drop-in candidate without presenting cross-package or functional equivalents as direct replacements.

見積もり お問い合わせ