PIC12CE519T-04/SN
PIC12CE519T-04/SN - 8-bit OTP MCU, 1.5KB EPROM, 41B RAM | Microchip
The Microchip PIC12CE519T-04/SN is an 8-bit CMOS RISC microcontroller with 1.5 KB of One-Time Programmable (OTP) EPROM program memory, 41 bytes of RAM data memory, and an integrated 16-byte EEPROM data space, housed in an 8-pin SOIC (SN) package. The 'T' suffix denotes tape-and-reel packaging and the '-04' suffix specifies a 4 MHz maximum clock input, yielding a 1 microsecond instruction cycle. Six general-purpose digital I/O pins, a watchdog timer, an internal 4 MHz RC oscillator, and an on-chip EEPROM make it suited to compact, cost-sensitive embedded designs.
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals. The PIC12CE519 belongs to Microchip's PIC12C 8-bit baseline family and sits inside the broader taxonomy: 8-bit MCU -> RISC microcontroller -> PIC microcontroller -> embedded processor -> semiconductor. In a typical system hierarchy it operates below a host processor or human-machine interface, handling housekeeping tasks such as sensor sampling, switch debouncing, LED blinking, simple PWM generation, and serial bit-banged communication.
Key features include 33 single-word instructions (most are single-cycle at 1 microsecond, branches take two cycles), a 4 MHz external clock input, an on-chip EEPROM for non-volatile data storage, a power-on reset (POR) and brown-out reset, a programmable watchdog timer (WDT) with its own on-chip RC oscillator, and wide operating voltage from 2.5V to 5.5V. These features give designers a tiny, low-pin-count MCU capable of replacing discrete logic in space-constrained products. The integrated EEPROM is the defining difference versus the sibling PIC12C519 - it lets the firmware store calibration values, configuration settings, or usage counters that must survive power cycles.
Technically, the device uses a Harvard RISC architecture with separate program and data buses, enabling single-cycle instruction fetch and execution. A two-stage pipeline overlaps fetch and execute, and the 8-bit ALU plus 14-bit instruction word is optimized for compact code density. Peripheral integration is deliberately minimal - GPIO, timer0, watchdog, and EEPROM - to keep die size, cost, and current consumption low. Typical active current is well below 1 mA at 4 MHz, making the part appropriate for battery-powered and always-on auxiliary controllers.
Typical applications include appliance control sub-modules (rice cookers, fans, coffee makers), remote control transmitters, sensor interface front-ends, smart LED controllers, battery chargers, automotive interior accessories such as ambient lighting or window controls, and industrial timer or counter modules. The wide 2.5V to 5.5V range supports both 3.3V and 5V rails. The on-chip EEPROM is especially useful for storing user-setpoints, calibration coefficients, or device serial numbers without external memory.
A key design consideration is OTP-only program memory: the PIC12CE519T-04/SN cannot be re-programmed in-circuit, so firmware must be validated before device programming and one-time-only programming strategy must be planned. The 41-byte RAM is small - allocate stack and scratchpad carefully, avoid large local buffers, and consider migrating to a flash-based PIC10F or PIC12F part for prototyping before committing to OTP. For development, use the PIC12CE519 with a JW windowed package or a flash-based sibling such as PIC12F519 to iterate firmware quickly.
This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's PIC12C 8-bit family, and practical design notes not consolidated in the manufacturer datasheet.
見積もり
お問い合わせ
