マイクロコントローラ

製品 (19,000+)

MC9328MXLDVP15 - ARM920T i.MXL 150MHz MPU | NXP | MAPBGA-225
MC9328MXLDVP15

MC9328MXLDVP15 - ARM920T i.MXL 150MHz MPU | NXP | MAPBGA-225

The NXP MC9328MXLDVP15 (i.MXL) is an ARM920T-based 32-bit applications microprocessor for portable and embedded multimedia devices. It integrates an ARM920T core running at up to 150 MHz, a USB device controller, an LCD controller, and an MMC/SD host controller, all packed into a 225-ball MAPBGA (13x13) package. As a member of the MX family, the i.MXL targets power-constrained handheld applications where integration reduces bill of materials and PCB area. An applications processor (AP) is a system-on-chip (SoC) class microprocessor designed to run a full operating system and rich user interfaces, as opposed to a microcontroller (MCU) which typically runs bare-metal or RTOS code. The i.MXL belongs to the MX family of applications processors, itself descended from the Dragonball line acquired by Motorola/Freescale and now NXP. Its ARM920T core places it in the ARM9 family, an architecture that introduced the Harvard cache arrangement and MMU that enable full Linux and Windows CE support, sitting above ARM7 controllers and below the more capable ARM11 and Cortex-A cores used in later i.MX generations. Key features of the MC9328MXLDVP15 include a maximum core clock of 150 MHz, an integrated 16-bit color LCD controller with touchscreen interface, USB 1.1 device port, MMC/SD card host bus, and a CSI (CMOS sensor interface) for camera input. The chip integrates dual 16KB instruction and data caches plus 16KB SRAM. Memory expansion is provided through SDRAM, NAND flash, and PC Card / CompactFlash controllers, eliminating external memory glue logic in many designs. Architecturally the i.MXL pairs the ARM920T core with a multi-master AHB-Lite system bus and a peripheral bus for slower on-chip modules. Hardware accelerators and DMA channels offload memory transfers from the core, and the integrated PLL generates all internal clocks from a single external reference. Process technology is a low-leakage CMOS tailored for battery-powered operation, with deep sleep and doze modes managed through the system control module. Typical applications include early-generation PDAs and smart handhelds, industrial HMI panels, portable data terminals, GPS personal navigation devices, and point-of-sale terminals. The wide peripheral mix also suits simple kiosk controllers, in-vehicle infotainment prototypes, and ZigBee/Bluetooth base stations where on-chip memory and host controllers reduce part count. Modern designs typically migrate to i.MXRT or i.MX 8M, but the i.MXL remains supported in legacy medical, industrial, and aerospace programs. When designing with this device, allocate generous BGA escape routing and matched-length groups for the SDRAM bus. Use the BSDL or JTAG interface for boundary-scan test, and follow the NXP hardware design guide for power-rail sequencing to avoid latch-up at cold start. This page consolidates distributor pricing for the obsolete i.MXL family, drop-in same-package alternatives in the MX family, and practical design notes distilled from the NXP hardware reference manual - information not duplicated on any single manufacturer or distributor page.

見積もり お問い合わせ
MC9328MXLDVP15R2 - i.MXL ARM920T 200MHz MPU | NXP | MAP-BGA-225
MC9328MXLDVP15R2

MC9328MXLDVP15R2 - i.MXL ARM920T 200MHz MPU | NXP | MAP-BGA-225

The NXP (formerly Freescale) MC9328MXLDVP15R2 is the i.MXL applications processor built around the ARM920T core, offered in a 225-pin MAPBGA (13x13 mm, 0.80 mm pitch) package and supplied on tape-and-reel. It is a member of the DragonBall family and is specified for a 150 MHz operating frequency in the DVP15 speed grade (the parent family supports up to 200 MHz on other grades), 32-bit RISC architecture, and a 1.8 V core supply. Integrated on-die peripherals include a USB device controller, an LCD controller, and an MMC/SD host controller, together with the ARM920T MMU and standard system blocks (interrupt controller, timers, UARTs, SSI/SPI, I2C, PWM, A/D). The DVP variant suffix also denotes the dry-pack / tape-and-reel shipping option. What is an applications processor? An applications processor is a highly integrated system-on-chip (SoC) microprocessor that combines a CPU core (here ARM920T, an early ARM9 family core), memory-management hardware, graphics/display peripherals, and connectivity IP into a single device. Applications processors sit hierarchically below 'microprocessor' and above 'MCU' in the embedded taxonomy: they target richer operating systems (Linux, WinCE) than typical MCUs and provide higher clock rates plus richer peripheral integration than discrete microcontrollers. The i.MXL specifically evolved from Freescale's DragonBall line (68K ancestry) into the ARM9 era, positioning itself as a low-power multimedia-capable processor for handheld and portable products. Key features of the MC9328MXLDVP15R2 include: ARM920T core with MMU and separate 16 KB instruction / 16 KB data caches; integrated LCD controller capable of driving color STN/TFT panels; USB 1.1 device port; MMC/SD host bus interface for removable storage; SSI/SPI, UART, I2C, fast-infrared (FIR) and PWM peripherals; A/D converter and GPIO; 1.8 V core / 3.3 V I/O dual-rail supply; and a 225-pin MAPBGA package. The combination of on-die peripheral richness and low power consumption made the i.MXL a popular choice for PDAs, industrial handhelds, and early-generation smart devices in the early-to-mid 2000s. Technically, the ARM920T core implements the ARMv4T instruction set, supporting both 32-bit ARM and 16-bit Thumb instructions for code-density optimization. The 225-ball MAPBGA uses a 0.80 mm pitch on a 13x13 mm body, allowing compact PCB layouts suitable for handheld enclosures. The device also integrates a 16-entry write buffer and a 32-bit external system bus, with boot options from external NOR flash, NAND flash, or serial ROM depending on system configuration. Typical applications include PDA / handheld organizers, industrial data terminals, portable medical monitors, point-of-sale terminals, low-end smart appliances, and embedded Linux / WinCE demonstration platforms. In each of these, the i.MXL's integrated LCD controller, MMC/SD host, and USB device eliminate the need for companion controller chips, reducing BOM cost and PCB area. When designing with this part, note that the 1.8 V core rail typically requires an external LDO from a 3.3 V source; bulk decoupling on each supply pin and short trace routing to ground vias are essential for the high-frequency core. Because the MC9328MXLDVP15R2 is a long-EOL part now serviced only through authorized aftermarket distributors (e.g. Rochester Electronics), designers planning new designs should evaluate current NXP i.MX RT or i.MX 6/7/8 successors instead. This page synthesizes distributor pricing from authorized aftermarket stock, verified NXP specifications, and drop-in i.MXL family alternatives not aggregated on a single distributor page.

見積もり お問い合わせ
MC9328MXLVM15 - i.MXL ARM920T MPU 150MHz 256-MAPBGA | NXP
MC9328MXLVM15

MC9328MXLVM15 - i.MXL ARM920T MPU 150MHz 256-MAPBGA | NXP

The NXP MC9328MXLVM15 is an i.MXL applications processor built around the ARM920T core, running up to 150 MHz, packaged in a 256-ball MAPBGA (14x14 mm) and offered as part of the Freescale/NXP DragonBall MX family. It integrates an LCD controller, USB device, and MMC/SD host controller into a single chip, alongside 32-bit addressing and a rich set of on-chip peripherals. An applications processor (AP) is a system-on-chip (SoC) class microprocessor that integrates a CPU core, memory controllers, and peripheral IP blocks so a portable product can be built with minimal external logic. The MC9328MXL belongs to the hierarchy ARM core -> ARM9 family -> ARM920T -> i.MX -> i.MXL applications processor -> embedded multimedia MPU, sitting at the apex of NXP's low-power multimedia line for handheld and portable designs. Key features of the MC9328MXLVM15 include an ARM920T core with 16 KB instruction cache and 16 KB data cache, a 128-bit external memory bus supporting SDRAM, NOR/NAND flash, and PCMCIA/CF cards, an integrated LCD controller capable of driving STN and TFT panels, a USB 1.1 device port, an MMC/SD host controller, and serial interfaces including UART, SPI, I2C, and I2S. Operating voltages are split between a 1.8V core supply and 3.0V I/O supply, with industrial-grade temperature options in the family. Architecturally, the ARM920T core implements the ARMv4T instruction set with a five-stage pipeline and separate instruction/data caches backed by a write buffer. The integrated LCD controller supports up to 800x600 resolution in passive color mode, and the system bus uses a multi-layer AHB fabric to keep peripheral DMA traffic from starving the CPU. Compared with the i.MX1 (MC9328MX1), the i.MXL family retains the same ARM920T core but typically ships at lower clock speeds and slightly different peripheral mixes. Typical applications for the MC9328MXLVM15 include portable media players, PDAs, smart handhelds, GPS navigators, industrial HMI panels, and early-generation e-readers. The on-chip LCD controller and SDRAM interface let engineers build a complete graphics terminal with only a power management IC, panel, and touch controller as external components. When designing with this part, ensure the 1.8V core and 3.0V I/O rails are brought up in the correct sequence to avoid latch-up, and place the boot-mode strapping resistors exactly as NXP specifies. Because the part is now end-of-life, consider long-term availability and second-source risk before committing new designs. This page consolidates distributor pricing, drop-in alternatives, application guidance, and engineering notes beyond the manufacturer datasheet to help engineers working with this legacy i.MXL part.

見積もり お問い合わせ
MC9328MXLVM20 - i.MXL ARM920T MPU 200MHz 256-PBGA | NXP Semiconductors
MC9328MXLVM20

MC9328MXLVM20 - i.MXL ARM920T MPU 200MHz 256-PBGA | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) MC9328MXLVM20 is the i.MXL applications processor, an ARM920T-core microprocessor IC operating at speeds up to 200 MHz, packaged in a 256-contact MAPBGA (14 mm × 14 mm). It integrates a USB device controller, an LCD controller, and an MMC/SD host controller alongside the ARM9TDMI-compatible core, targeting portable and battery-powered multimedia products. The VM20 speed grade denotes the 200 MHz core clock variant in the i.MXL family. An applications processor (AP) is a system-on-chip (SoC) class microprocessor that integrates CPU, memory controller, and a range of peripheral interfaces into a single package, optimized for embedded multimedia products rather than general-purpose computing. The i.MXL sits within the i.MX family hierarchy (i.MX1 → i.MX21 → i.MX25 → ...), which itself derives from the ARM9-based DragonBall/Freescale MX line; this positions the part at the low-power, mid-performance tier for handheld terminals, PDAs, and industrial HMI panels of its era. Key features include the ARM920T core with separate 16 KB instruction and 16 KB data caches, a Harvard MMU, integrated SRAM, an LCD controller with dedicated DMA, an external memory interface for SDRAM, NAND/NOR flash and PCMCIA/CF, plus USB 1.1 device, I²S audio, SPI, I²C, UART, and MMC/SD interfaces. Power management is handled via multiple on-chip voltage domains and clock-gating, supporting the low-duty-cycle workloads of battery-powered products. Architecturally, the ARM920T core pairs a Harvard cache structure with a write buffer and a full MMU, allowing Linux and WinCE operating systems to run natively. The integrated peripherals share an AHB/APB bus fabric, with DMA channels to offload the CPU during display refresh and memory-move operations. The 200 MHz speed grade enables QVGA/VGA-resolution LCD output without external graphics hardware. Typical applications include handheld data terminals, industrial HMI panels, portable medical instruments, point-of-sale terminals, MP3/multimedia players, and early-generation PDAs/smartphones. The wide peripheral mix makes the part a single-chip solution for products requiring display, touch input, removable storage (MMC/SD), and USB connectivity in a compact footprint. Designers should note that the MC9328MXLVM20 has been classified Obsolete/EOL by NXP. New designs should consider the modern i.MX RT or i.MX 6/7/8 families; this part remains in service only for legacy product maintenance, repair, and refurbishment. PCB designers must follow the 14 × 14 mm MAPBGA land pattern exactly, with controlled-impedance routing for SDRAM signals. This page synthesizes secondary-market distributor listings, cross-reference data, and legacy design guidance not consolidated in any single manufacturer datasheet.

見積もり お問い合わせ
MC9328MXLVP15 - i.MXL ARM920T MPU 150MHz 225-MAPBGA | NXP
MC9328MXLVP15

MC9328MXLVP15 - i.MXL ARM920T MPU 150MHz 225-MAPBGA | NXP

The NXP MC9328MXLVP15 is a member of the Freescale/NXP i.MX family of applications processors, integrating an ARM920T core running up to 150 MHz in a 225-ball MAPBGA (13x13 mm) package. It is a 32-bit RISC microprocessor with separate 16 KB instruction and 16 KB data caches, MMU support, and a rich set of integrated peripherals including an LCD controller, USB device, MMC/SD host, and synchronous serial interfaces. It targets power-efficient portable and embedded multimedia platforms. What is an applications processor? An applications processor is a system-on-chip category above a basic microcontroller: it integrates a high-performance CPU core (here ARM920T), memory controllers, dedicated hardware accelerators for multimedia (LCD, image sensors, audio), and standard connectivity peripherals. Applications processors sit between microcontrollers and full application processors in the IC hierarchy: microprocessor (MPU) -> applications processor -> SoC -> semiconductor. The i.MXL family is positioned for low-power handheld and industrial HMI products that need an LCD and modest multimedia without high cost. Key features include: 150 MHz ARM920T core with 16/16 KB I/D-cache and MMU; integrated LCD controller supporting STN and TFT panels; USB device (USB 1.1) controller; MMC/SD host controller; up to six integrated peripheral interface modules; wide operating voltage range with internal regulators; and a 225-contact MAPBGA (Mold Array Process Ball Grid Array) package sized at 13x13 mm with 0.80 mm ball pitch. The ARM920T core implements the ARMv4T instruction set, including the Thumb 16-bit compressed instruction subset for code-density-critical firmware. Integrated hardware blocks (LCD, USB, MMC/SD) offload the CPU, allowing it to focus on application logic. Power management is handled via run, doze, and stop modes and an on-chip PLL. Typical applications include portable media players, industrial HMI panels, GPS/PDA terminals, smart handhelds, point-of-sale terminals, and embedded control panels with graphical displays. The integrated LCD controller and low power consumption make the i.MXL especially well-suited for battery-powered graphical products. When designing with this part, verify the PCB layout accommodates the 0.80 mm ball pitch and provides adequate thermal relief - although power dissipation is modest, the MAPBGA requires proper via-in-pad or microvia fabrication. Existing i.MX firmware bootloaders and Linux BSPs are broadly reusable. This page synthesizes distributor pricing, same-package and cross-brand drop-in alternatives, and practical design notes not always present in the manufacturer datasheet.

見積もり お問い合わせ
MC9328MXLVP15R2 - i.MXL ARM920T 32-Bit MPU, 150MHz | NXP | MAPBGA-225
MC9328MXLVP15R2

MC9328MXLVP15R2 - i.MXL ARM920T 32-Bit MPU, 150MHz | NXP | MAPBGA-225

The NXP MC9328MXLVP15R2 is a member of the DragonBall MXL (i.MXL) family of application processors built around the ARM920T core. It integrates a 32-bit RISC CPU running at up to 150 MHz, a 225-ball MAPBGA package on a 13 mm x 13 mm body with 0.80 mm pitch, and a single 1.8 V core supply rail. The part is offered on 13" tape-and-reel packaging (suffix R2) and targets human-interface and embedded control applications where the mature ARM920T ecosystem is valuable. A microprocessor (MPU/MCU) is an integrated circuit that contains a central processing unit, memory interfaces, and peripheral controllers on a single die. The i.MXL family belongs to the broader category of 32-bit embedded microprocessors -> system-on-chip (SoC) -> integrated circuits -> semiconductors. As a member of the ARM9E family tree (ARM920T core), the i.MXL executes the ARMv4T instruction set with both ARM and Thumb mode support, enabling efficient code density for resource-constrained designs. Key features include the ARM920T core with 16 KB instruction cache and 16 KB data cache, a Memory Management Unit (MMU) for protected operating systems such as Linux and WinCE, an integrated LCD controller capable of driving STN and TFT panels, a USB device controller, and an external memory controller supporting SDRAM, NOR flash, NAND flash, and PCMCIA/CF cards. Peripherals on the die include UARTs, an SPI interface, I2C, I2S audio, PWM timers, GPIO, real-time clock, and a 10-bit analog touch-screen controller. Architecturally the i.MXL combines a Harvard-cache ARM920T with an AMBA AHB/APB bus matrix and a wide external bus interface. The 150 MHz operation provides approximately 125 Dhrystone MIPS, while the 1.8 V internal supply (with separate I/O voltages, typically 1.8 V to 3.3 V) keeps dynamic power dissipation modest for the integration level. The MAPBGA-225 package offers strong thermal mass and an exposed-die paddle path for the cooling needs of handhelds. Typical applications include industrial human-machine interface (HMI) panels, point-of-sale (POS) terminals, portable data collectors, two-way radio / push-to-talk consoles, medical patient-monitoring handhelds, automotive telematics and infotainment controllers, and legacy PDA-class designs where the DragonBall software stack is preserved. The part is also widely used in OEM/ODM Linux/WinCE reference designs because of its mature driver tree. When designing with this part, place at least four 0.1 uF decoupling capacitors within 5 mm of the supply balls, provide the 32.768 kHz RTC crystal reference, and verify boot mode strap pins (BOOT[3:0]) before first bring-up. Designers should also evaluate migration to i.MX25 or i.MX28 for new designs because the i.MXL family is approaching end-of-life.

見積もり お問い合わせ
MC9328MXLVP20 - i.MXL 200MHz ARM920T MPU, 225-MAPBGA | NXP
MC9328MXLVP20

MC9328MXLVP20 - i.MXL 200MHz ARM920T MPU, 225-MAPBGA | NXP

The NXP MC9328MXLVP20 is an i.MXL integrated portable system processor built on the ARM920T core, operating at up to 200 MHz, housed in a 225-ball MAPBGA package (13 x 13 mm, 0.8 mm pitch). It integrates a 32-bit RISC CPU with on-chip modules including a USB device, an LCD controller, and an MMC/SD host controller to support rich multimedia portable products. According to the NXP MC9328MXL datasheet, supply voltage is 1.8 V core and the package is ROHS-compliant plastic MAPBGA-225. An applications processor is a system-on-chip that integrates a CPU core with peripheral controllers and memory interfaces to run an operating system and execute application code in embedded products. The MC9328MXLVP20 belongs to the i.MX family of applications processors -> ARM9 microprocessors -> embedded microprocessors -> microcontrollers (MCU) -> integrated circuits (semiconductors). It targets handheld and portable multimedia devices that require moderate compute performance combined with low power consumption. Key features include an ARM920T core with 16 KB instruction cache and 16 KB data cache, integrated LCD controller supporting TFT and STN panels, USB device (full-speed) controller, MMC/SD host controller, and external memory interface for SDRAM, NAND flash, and NOR flash. The 200 MHz clock speed and 32-bit data bus deliver the throughput needed for multimedia UI rendering and basic video decoding in early-generation PDAs, smartphones, and portable media players. The MC9328MXLVP20 is also known by its product family name "DragonBall MXL," reflecting its lineage from the Motorola/Freescale DragonBall series used in PDAs such as the Palm Pilot. Architecture is RISC with a 32-bit data bus and 32-bit address bus; the integrated MMU and write buffer accelerate OS-level memory management for embedded Linux and Windows CE deployments. Typical applications include handheld PDAs, early-generation smartphones, portable media players (PMP), GPS handhelds, industrial HMI panels, and embedded point-of-sale terminals. The integrated LCD controller and MMC/SD host make it well suited for battery-powered devices with color displays and removable storage. When designing with this part, note the 1.8 V core supply requires careful power sequencing with other system rails. The 225-ball MAPBGA requires 4-layer or better PCB stack-up with controlled-impedance routing for the external memory bus. The part is end-of-life per the NXP product page; consider the i.MX25 or i.MX28 families for new designs. This page synthesizes distributor stock data (Octopart, DigiKey, Mouser), the official NXP datasheet (MC9328MXL.pdf), drop-in alternative analysis, and practical design guidance not consolidated on any single distributor page.

見積もり お問い合わせ
MC9328MXSCVF10 - i.MXS ARM920T MPU, 100MHz, 225-MAPBGA | NXP
MC9328MXSCVF10

MC9328MXSCVF10 - i.MXS ARM920T MPU, 100MHz, 225-MAPBGA | NXP

The NXP (formerly Freescale) MC9328MXSCVF10 is an ARM920T-based 32-bit microprocessor from the i.MXS reduced-feature family of application processors, operating at up to 100 MHz and housed in a 225-ball MAPBGA (13x13 mm) package. It integrates the ARM920T core with the i.MX system-on-chip peripheral set, targeting cost-sensitive embedded designs that need full ARMv4 processing but with reduced peripheral content compared to higher-tier i.MX parts. The part is built on a 0.16 um CMOS process and is offered in a plastic MAPBGA-225 case outline (Case 1304B-01). An application processor is a microprocessor that integrates the CPU core, memory controller, and a configurable set of on-chip peripherals (timers, UARTs, I2C/SPI, USB, LCD controller, etc.) into a single die. Within the broader taxonomy it sits as: application processor -> microprocessor (MPU) -> integrated circuit -> semiconductor. The i.MXS sub-family is the streamlined derivative of the i.MX family, intended for handhelds, PDAs, industrial HMIs, and entry-level smart devices where BOM cost and PCB area matter more than peak graphics or multimedia throughput. Key features of the MC9328MXSCVF10 include a 32-bit ARM920T core with separate 16 KB instruction and 16 KB data caches, a system speed up to 100 MHz, integrated SDRAM/LCD/bus controllers, and the standard i.MX peripheral mix. The 225-MAPBGA package provides ample I/O for multimedia and connectivity while keeping the die in a manageable 13x13 mm footprint. Technically, the device pairs the ARM920T integer pipeline (which adds a hardware multiplier and supports the ARMv4 instruction set) with a system bus that ties the core to AHB peripherals. Designers should pair it with an external SDRAM and boot NOR/NAND flash; an MMU is included, so Linux and WinCE ports are feasible when memory footprint permits. Power management is handled by on-chip PLLs and a programmable frequency generator. Typical applications include PDAs, handheld terminals, industrial HMIs, point-of-sale terminals, simple web pads, and entry-level consumer electronics requiring a 32-bit ARM core. It is also a fit for low-cost industrial control panels and machine-to-machine gateways. Designers choose the MC9328MXSCVF10 specifically when the full i.MX feature set is unnecessary and BOM area must be minimized. When designing with this device, verify the BSP and Linux/WinCE support status against your chosen OS version, as the i.MXS family has been in long-term support mode. Ensure the PCB accommodates the 225-ball MAPBGA with proper microvia stack-up and matched-length SDRAM traces. Boot mode strapping and JTAG access must be planned at board level before layout is finalized. This page synthesizes distributor stock, pricing tiers, and current lifecycle status for the MC9328MXSCVF10 alongside drop-in compatible alternatives in the same MAPBGA-225 footprint, plus practical design notes not found in the standalone datasheet.

見積もり お問い合わせ
MC9328MXSVP10 - i.MXS ARM920T MPU 100MHz MAPBGA-225 | NXP
MC9328MXSVP10

MC9328MXSVP10 - i.MXS ARM920T MPU 100MHz MAPBGA-225 | NXP

The NXP (formerly Freescale) MC9328MXSVP10 is an i.MXS applications processor built around an ARM920T core running up to 100 MHz, packaged in a 225-ball MAPBGA (13x13 mm, 0.8 mm pitch). It targets compact, low-power embedded products that need an integrated LCD controller and a USB device port on a single die. The 32-bit RISC core and on-chip peripherals make it suitable for portable HMI, point-of-sale, and home-automation designs. An applications processor is a highly integrated system-on-chip that combines a CPU core (here ARM920T, an ARM9-family implementation), memory interfaces, display and connectivity controllers, and power-management logic. Applications processors sit between microcontrollers (which emphasise on-chip flash and deterministic real-time control) and full application processors used in tablets and smartphones (which add high-speed multimedia and external DRAM). Within the broader taxonomy, this part is a microprocessor IC > microprocessor > MPU > applications processor > semiconductor. Key features include a 100 MHz ARM920T core with a 32-bit data bus, an integrated LCD controller for direct glass drive, a USB device controller, and power-saving modes for low standby consumption. The "V" in the part number indicates a commercial temperature grade, while the "P10" speed designator confirms the 100 MHz top frequency. Supply voltage spans 1.7V to 3.3V across the analog/digital and I/O rails. The part is the "Corsica" derivative of the i.MX family - a reduced-feature member designed specifically to support the .NET Micro Framework. Compared with the higher-tier i.MXL and i.MX1 members, the i.MXS drops the multimedia accelerator and some high-bandwidth peripherals but retains the LCD controller and USB device, which keeps power and BOM cost low for cost-sensitive HMI designs. The MAPBGA-225 package exposes the full bus and peripheral set while remaining reflow-compatible with standard lead-free assembly lines. Typical applications include remote controls, home-automation panels, point-of-sale terminals, HMI panels, and industrial controllers requiring a small footprint and an integrated display interface. The LCD controller reduces the need for an external graphics controller, while the USB device port enables direct PC or host connectivity for firmware updates and data exchange. When designing with the MC9328MXSVP10, pay attention to PCB stack-up and via-in-pad escape routing for the MAPBGA-225 footprint - the 0.8 mm pitch demands 4 or 6-layer boards with microvias. Provide separate analog and digital supply decoupling and respect the I/O voltage sequencing rules documented in the NXP datasheet to avoid latch-up. This page synthesises distributor stock, pricing, drop-in i.MXS-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC94MX21DVKN3 - i.MX21 ARM9 MPU 350MHz 289-LFBGA | NXP
MC94MX21DVKN3

MC94MX21DVKN3 - i.MX21 ARM9 MPU 350MHz 289-LFBGA | NXP

The NXP MC94MX21DVKN3 is a 32-bit ARM926EJ-S microprocessor from the i.MX21 applications processor family, running at up to 350 MHz and housed in a 289-ball LFBGA package (14x14 mm). It is a ROMless system-on-chip that integrates an ARM926EJ-S core with a memory management unit, LCD controller, USB 1.x host/device controller, and SDRAM controller on a single die manufactured in 0.13 um CMOS. An applications processor (AP) is a high-integration SoC designed to run an operating system and serve as the main CPU in embedded systems, going beyond a basic microcontroller by integrating multimedia interfaces, external memory control, and rich peripheral connectivity. The i.MX21 belongs to the i.MX family hierarchy: i.MX21 -> ARM9 applications processor -> applications processor -> microprocessor -> integrated circuit -> semiconductor. It enables product designers to add graphical user interfaces, touch input, and USB connectivity without a companion companion controller ASIC. Key features include an ARM926EJ-S core with 16 KB instruction cache and 16 KB data cache, an integrated LCD controller supporting TFT/STN panels, two USB 1.x controllers (host and device), an SDRAM controller, and an operating voltage range suitable for battery-powered handheld designs. The 289-LFBGA package with 0.8 mm ball pitch supports high-density board layouts while providing the signal integrity required for 350 MHz operation. The MC94MX21 uses a layered AHB/APB bus architecture with a JTAG debug interface, on-chip boot ROM options, and a comprehensive set of peripherals including I2C, SPI, UART, and SSI/I2S. Compared to the older i.MX1 (MC9328MX1), the i.MX21 boosts clock speed, memory addressing, and adds integrated LCD and USB On-The-Go support. Typical applications include industrial HMI panels, point-of-sale terminals, portable medical devices, portable data collectors, and consumer electronics requiring multimedia and connectivity features. The low-power design with operating temperature range of -40 C to +85 C supports industrial and outdoor deployments. Designers should provide proper power decoupling with 100 nF ceramic capacitors near each VDD ball and follow the NXP layout guide for the 289-LFBGA 0.8 mm pitch footprint to ensure manufacturing yield. USB signal traces must be 90 ohm differential and routed as short as possible to preserve signal integrity at USB 1.x full-speed operation.

見積もり お問い合わせ
MC9RS08KA1CDB - 8-bit RS08 MCU, 1KB Flash, 6-DFN | NXP
MC9RS08KA1CDB

MC9RS08KA1CDB - 8-bit RS08 MCU, 1KB Flash, 6-DFN | NXP

The NXP MC9RS08KA1CDB is an 8-bit RS08-core microcontroller with 1KB of flash memory, 128 bytes of RAM, an integrated analog comparator, and 6 general-purpose I/O pins, housed in a 6-DFN exposed-pad (3x3 mm) package and operating at up to 10 MHz. An entry-level 8-bit microcontroller (MCU) is the smallest class of programmable system-on-chip: it combines a processor core, program flash, data RAM, clock generation, reset supervision, and a few peripherals on one die. Within the hierarchy of embedded processors - MCU -> microcontroller unit -> embedded IC -> semiconductor - ultra-low-end MCUs like the RS08KA family target applications where a discrete logic solution would otherwise be used, replacing glue logic and analog timers with reprogrammable silicon at a comparable cost. Key features include the simplified S08-derived RS08 instruction set with high-performance LDA, STA, and CLR instructions, 1KB of on-chip flash (self-programmable), an analog comparator (ACMP), low-voltage inhibit (LVI) and power-on reset (POR) supervision, and multiple low-power modes. Supply operation spans 2.5V, 3.3V, and 5V rails, which simplifies integration into both legacy 5V systems and modern 3.3V designs. Architecturally, the RS08 core is a cost-reduced derivative of the industry-proven S08 (HC08 lineage) core from Freescale Semiconductor, now part of NXP Semiconductors. CISC-style addressing keeps code density high, important when program space is only 1KB. System protection features - COP watchdog, LVI, and POR - reduce external component count in cost-sensitive appliances and small consumer products. Typical applications include small appliance control, LED lighting and dimming, battery charger supervision, timer and sequencer replacement, and simple human-interface functions in cost-driven consumer electronics. The 3x3 mm 6-DFN footprint suits extremely space-constrained boards. Design consideration: this part is End-of-Life per the NXP product page, so new designs should verify remaining supply or plan a migration path; the 6-DFN footprint is shared with the pin-compatible MC9RS08KA2CDB, which doubles flash to 2KB. This page synthesizes distributor pricing, drop-in alternative data, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9RS08KA1CDBR - 8-bit RS08 MCU, 1KB Flash, 6-DFN | NXP (Tape & Reel)
MC9RS08KA1CDBR

MC9RS08KA1CDBR - 8-bit RS08 MCU, 1KB Flash, 6-DFN | NXP (Tape & Reel)

The NXP MC9RS08KA1CDBR is an 8-bit RS08-core microcontroller with 1KB of flash memory, 128 bytes of RAM, an integrated analog comparator, and 6 general-purpose I/O pins, housed in a 6-DFN exposed-pad (3x3 mm) package and operating at up to 10 MHz. An entry-level 8-bit microcontroller (MCU) is the smallest class of programmable system-on-chip: it combines a processor core, program flash, data RAM, clock generation, reset supervision, and a few peripherals on one die. Within the hierarchy of embedded processors - MCU -> microcontroller unit -> embedded IC -> semiconductor - ultra-low-end MCUs like the RS08KA family target applications where a discrete logic solution would otherwise be used, replacing glue logic and analog timers with reprogrammable silicon at a comparable cost. Key features include the simplified S08-derived RS08 instruction set with high-performance LDA, STA, and CLR instructions, 1KB of on-chip flash (self-programmable), an analog comparator (ACMP), low-voltage inhibit (LVI) and power-on reset (POR) supervision, and multiple low-power modes. Supply operation spans 2.5V, 3.3V, and 5V rails, which simplifies integration into both legacy 5V systems and modern 3.3V designs. Architecturally, the RS08 core is a cost-reduced derivative of the industry-proven S08 (HC08 lineage) core from Freescale Semiconductor, now part of NXP Semiconductors. CISC-style addressing keeps code density high, important when program space is only 1KB. System protection features - COP watchdog, LVI, and POR - reduce external component count in cost-sensitive appliances and small consumer products. Typical applications include small appliance control, LED lighting and dimming, battery charger supervision, timer and sequencer replacement, and simple human-interface functions in cost-driven consumer electronics. The 3x3 mm 6-DFN footprint suits extremely space-constrained boards. Design consideration: this part is End-of-Life per the NXP product page, so new designs should verify remaining supply or plan a migration path; the 6-DFN footprint is shared with the pin-compatible MC9RS08KA2CDB, which doubles flash to 2KB. This page synthesizes distributor pricing, drop-in alternative data, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9RS08KA1CPC - 8-bit RS08 MCU, 1KB Flash, 10MHz, DIP-8 | NXP
MC9RS08KA1CPC

MC9RS08KA1CPC - 8-bit RS08 MCU, 1KB Flash, 10MHz, DIP-8 | NXP

The NXP MC9RS08KA1CPC is an 8-bit RS08 microcontroller with 1KB of Flash program memory, 63 bytes of RAM, and an integrated analog comparator, housed in an 8-pin PDIP (DIP-8) through-hole package. It runs at 10MHz internal bus frequency from a 1.8V to 5.5V supply and provides 4 general-purpose I/O pins plus dedicated reset and ACMP pins. An RS08 microcontroller is a reduced-instruction 8-bit core derived from the Freescale/NXP S08 family, optimized for ultra-low-cost, ultra-low-power embedded applications. It is part of the broader 8-bit MCU hierarchy (8-bit microcontroller -> microcontroller unit -> embedded controller -> semiconductor) and shares the HCS08 instruction set with the LDA, STA, and CLR extensions. Compared with the older HC08, RS08 cuts die area and cost while preserving the S08 peripheral ecosystem, making it suited for appliances, toys, lighting controllers, and battery-powered sensor nodes. Key features include 1KB Flash, 63-byte RAM, an internal clock source with trim, brown-out and low-voltage detect (LVD/POR), a watchdog timer, an on-chip analog comparator, and multiple STOP/WAIT low-power states. The internal oscillator eliminates the need for an external crystal in most designs, reducing BOM cost and PCB area in cost-sensitive products. Typical applications include low-end consumer white goods, remote-control transmitters, LED drivers, battery chargers, and simple sensor readouts. The DIP-8 package and wide operating range make it especially attractive for hobbyist, educational, and legacy-replacement designs where through-hole mounting is preferred for hand-prototyping or repair work. When designing with this device, ensure the supply stays within 1.8V-5.5V and that the I/O pins do not exceed their source/sink ratings. The internal analog comparator allows reaction to external analog signals without an external op-amp, simplifying BOM in cost-sensitive products.

見積もり お問い合わせ
MC9RS08KA1CSC - 8-Bit RS08 MCU, 1KB Flash, SOIC-8 | NXP
MC9RS08KA1CSC

MC9RS08KA1CSC - 8-Bit RS08 MCU, 1KB Flash, SOIC-8 | NXP

The NXP Semiconductors MC9RS08KA1CSC is an 8-bit RS08KA microcontroller with 1 KB of flash memory, 63 bytes of RAM, an internal oscillator, and an 8-pin SOIC package. It targets cost-sensitive embedded applications requiring minimal code space and a compact footprint. The verified product information identifies a 10 MHz device in distributor listings, while another listing describes a 20 MHz RS08KA family; use the manufacturer datasheet for the exact operating-frequency and electrical limits before final design release. The RS08 core is a compact CISC processor built around the S08 instruction set with additional high-performance LDA, STA, and CLR instructions. This MCU is intended for simple control, sensing, and actuator tasks where a larger 8-bit MCU would add unnecessary cost, memory, and board area. Its 63-byte RAM and 1 KB flash are sufficient for startup code, basic state machines, and tightly bounded control logic rather than general-purpose applications. The device operates from a low-voltage supply suitable for embedded and battery-oriented designs, with an internal oscillator eliminating a mandatory external clock source. The RS08KA family also includes timer and interrupt resources for periodic sensing and event handling. Power-management features and the small package help reduce both board footprint and system complexity in cost-driven products. Typical uses include simple keypad or button interfaces, low-speed motor and relay controllers, basic sensor nodes, household appliance controls, and auxiliary embedded functions. The compact SOIC-8 outline is useful when through-hole or leaded assembly is preferred, but its 1 KB program memory is a strict constraint for larger control algorithms. When designing around MC9RS08KA1CSC, verify the exact pin multiplexing, reset behavior, oscillator limits, and supply-voltage range in the NXP datasheet. Avoid assuming that all RS08 family members are software-compatible, because memory size and peripheral configurations can differ. A migration to a larger MCU may be required if the application grows beyond the 63-byte RAM and 1 KB flash budget. This product page combines verified distributor data, lifecycle information, package details, design constraints, and an honest assessment of alternative availability. It is intended to help engineers quickly determine whether this RS08KA device fits a minimal embedded-control design before requesting documentation and sourcing support.

見積もり お問い合わせ
MC9RS08KA2CDB - 8-Bit RS08 MCU, 2KB Flash, 6-DFN | NXP
MC9RS08KA2CDB

MC9RS08KA2CDB - 8-Bit RS08 MCU, 2KB Flash, 6-DFN | NXP

The NXP Semiconductors MC9RS08KA2CDB is an 8-bit RS08KA-family microcontroller built around NXP's reduced RS08 core, offering 2KB of on-chip Flash program memory, 63 bytes of RAM, and a 10 MHz (20 MHz bus) CPU in a compact 6-pin DFN-EP (3x3 mm) package. According to distributor listings, the device integrates peripherals including a Low-Voltage Detect (LVD), Power-On Reset (POR), and a Watchdog Timer (WDT), with only 4 general-purpose I/O lines remaining after dedicated VDD/VSS and reset pins. Background: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on one silicon die. The RS08 core is a streamlined variant of NXP's (formerly Freescale's) S08 architecture, designed for ultra-low-cost, ultra-low-pin-count applications where HCS08 performance is not required. The RS08 belongs to the 8-bit MCU product class within the broader microcontroller hierarchy (8-bit MCU -> microcontroller -> embedded computing -> semiconductor). It is intended for cost-sensitive, space-constrained designs that still need deterministic, low-power embedded control. Key specifications: the MC9RS08KA2CDB operates from a 1.8 V to 5.5 V supply (typical operating points 2.5 V/3.3 V/5 V), includes 2KB (2K x 8) of Flash, 63 x 8 RAM, and 4 GPIO. The internal analog comparator (ACMP) listed on some distributor variants is the key analog peripheral in this family, enabling simple threshold detection without an external op-amp. In design, the RS08 core uses a simplified S08 instruction set plus high-performance LDA, STA, and CLR instructions, allowing efficient C and assembly code generation on a tiny Flash budget. The 6-pin DFN-EP footprint with exposed pad gives a low thermal-resistance path and minimal PCB area, suited to coin-cell or battery-powered sensor nodes and appliance user-interface replacement. Typical applications: low-end consumer appliances, replacement of discrete logic + analog timer ICs, AC/DC wall-cube controller interfaces, simple LED drivers, battery chargers, and remote controls. The combination of small package, integrated LVD/POR, and ACMP lets one chip replace multiple discrete components. Design consideration: because only 4 I/O pins are available, designers must budget pin functions carefully — for example, one pin may be shared between ADC input, ACMP input, and external interrupt. Always connect the EP (exposed pad / pin 6 in some outlines) to the ground plane for thermal and electrical performance. This page synthesizes datasheet specifications, current distributor pricing, drop-in same-family alternatives, and PCB-level design notes compiled from manufacturer documentation and aftermarket listings — material not consolidated in any single OEM source.

見積もり お問い合わせ
MC9RS08KA2CPC - 8-bit RS08 MCU, 2KB Flash, DIP-8 | NXP
MC9RS08KA2CPC

MC9RS08KA2CPC - 8-bit RS08 MCU, 2KB Flash, DIP-8 | NXP

The NXP MC9RS08KA2CPC is a 8-bit RS08 microcontroller with 2KB flash memory, 62 bytes of RAM, and an integrated analog comparator, housed in an 8-pin PDIP package. The device operates at up to 10 MHz bus frequency and is designed for ultra-low-end embedded control applications where minimal memory and low cost are priorities. An 8-bit microcontroller (MCU) is a small computer-on-a-chip containing a CPU core, flash program memory, RAM, and peripheral set on a single silicon die. Within the semiconductor taxonomy, the MC9RS08KA2CPC sits in the hierarchy: 8-bit MCU -> RS08 family microcontroller -> Freescale/NXP Kinetis-era low-end MCU -> embedded microcontroller -> integrated circuit. The simplified S08 instruction set adds LDA, STA, and CLR high-performance instructions to support compact code density. Key features include 2KB flash program memory, 62 bytes RAM, an integrated analog comparator for sensor interfacing, a low-voltage inhibit (LVI) module, power-on reset (POR), and an internal clock source. The 8-pin PDIP package supports through-hole PCB mounting, which simplifies prototyping, breadboarding, and low-volume production without surface-mount reflow equipment. The device also supports background debug mode (BDM) for in-circuit programming and debugging. The MC9RS08KA2CPC uses the RS08 central processor unit, which is a streamlined variant of the S08 core optimized for low pin-count applications. With the simplified instruction set, deterministic interrupt handling, and low quiescent current, the part targets cost-sensitive applications that require just enough compute to read sensors, drive outputs, and manage simple state machines. The internal oscillator and integrated analog comparator reduce external component count. Typical applications include consumer appliance controls, lighting controllers, simple sensor interfaces, battery chargers, and white goods. The combination of analog comparator, internal clock, and low pin count suits designs where the MCU is paired with a single analog signal and a few digital outputs. When designing with this part, note that the DIP-8 package requires through-hole PCB pads and clearance holes, which is unsuitable for high-density SMT boards. For new designs in this performance class, evaluate NXP's S08PT or S08P families, or Microchip's PIC16F or ATtiny families, which offer modern peripherals and active lifecycles. This page consolidates the verified NXP product information, datasheet links from distributor sources, and pin-compatible drop-in alternatives into a single engineer-ready reference not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
MC9RS08KA2CPC174 - 8-bit RS08 MCU 2KB Flash 20MHz | NXP
MC9RS08KA2CPC174

MC9RS08KA2CPC174 - 8-bit RS08 MCU 2KB Flash 20MHz | NXP

The NXP (Freescale Semiconductor) MC9RS08KA2CPC174 is an 8-bit RS08-core microcontroller with 2KB (2K x 8) FLASH memory, a 20MHz maximum CPU clock, and an 8-pin PDIP package. The RS08KA family is specifically crafted for the ultra-low-end market, delivering minimal memory, low power consumption, and cost-effective basic embedded control in an exceptionally small footprint. An 8-bit microcontroller (MCU) is a single-chip computer whose data bus is 8 bits wide, integrating a processor core, program memory (FLASH), RAM, I/O ports, and system protection into one package. Within the MCU hierarchy, the RS08 family sits below the S08 and HC08 families as a simplified, cost-optimized core retaining S08-derived instruction efficiency. Key features of the MC9RS08KA2 include the RS08 central processor unit with a simplified S08 instruction set augmented by high-performance LDA, STA, and CLR instructions, 2KB on-chip FLASH program memory, and 20MHz internal bus operation. System protection features and ultra-low-end cost positioning make it a direct drop for discrete logic and simple state-machine designs. Technically, the RS08 core streamlines the classic HC08/S08 architecture, reducing gate count and die size while preserving code compatibility concepts familiar to HC08 developers. The internal oscillator removes the need for external crystals in many designs, lowering bill-of-materials cost and board area. Typical applications include small appliance control, simple sensor interfacing, LED and indicator sequencing, low-cost battery chargers, and replacement of glue logic in industrial boards. The through-hole 8-PDIP package suits prototypes, legacy repair, and hand-soldered production. Design consideration: verify the availability status of this Rochester Electronics-distributed suffix, as the original Freescale device is a legacy part; plan second sourcing accordingly. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering value beyond a standard product listing.

見積もり お問い合わせ
MC9RS08KA4CPJ - 8-bit RS08 MCU, 4KB Flash, 20MHz, DIP-20
MC9RS08KA4CPJ

MC9RS08KA4CPJ - 8-bit RS08 MCU, 4KB Flash, 20MHz, DIP-20

The NXP MC9RS08KA4CPJ is an 8-bit RS08 microcontroller from the RS08KA family, delivering 4 KB of on-chip Flash, a maximum CPU clock of 20 MHz, and a 20-pin PDIP through-hole package. It is built on Freescale's (now NXP) reduced-instruction-set RS08 core, a streamlined successor to the legacy HC08 family, optimized for ultra-low-end cost-sensitive applications. The device supports operating voltages from 2.5V to 5.5V across the industrial temperature range up to 85 C. An 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, RAM, non-volatile program memory (Flash/ROM), and peripherals onto one silicon die. Within the broader hierarchy, the MC9RS08KA4CPJ sits at: 8-bit MCU -> RS08 architecture -> Freescale/NXP ColdFire-RS lineage -> embedded microcontroller -> semiconductor IC. The RS08 core is a subset of the well-known HC08 instruction set, allowing code compaction for cost-driven nodes such as appliance controls, toys, and simple sensor interfaces. Key features include 4 KB of Flash program memory, 63 bytes of RAM, an internal clock source, one 16-bit timer/PWM, an 8-bit analog-to-digital converter (ADC) with multiple channels, and an on-chip debug (BGND) interface for in-system programming. The CPU operates from an internal bus frequency that supports up to 20 MHz instruction execution, while integrated peripherals include a real-time interrupt (RTI), keyboard interrupt (KBI) module, and a low-power wait/stop mode to meet battery-life targets. Architecturally, the RS08 core delivers HC08-subset instructions encoded in a 16-bit opcode space, paired with a single 16-bit index register and a 16-bit stack pointer for efficient C interrupt handling. The internal clock can be driven from an external crystal or the on-chip oscillator, simplifying BOM count. Power management is handled by programmable RUN/WAIT/STOP modes, while the ADC, timers, and I/O are mapped through a unified memory-mapped peripheral space. Typical applications span low-end consumer electronics (e.g., battery chargers, LED controllers, remote controls, and small appliances), white goods and HVAC sub-modules, and simple sensor-conditioned interfaces. It also fits human-interface nodes that replace mechanical switches with capacitive or resistive sensing, and as a supervisory MCU bridging a low-power wakeup role for larger SoCs. When designing with the MC9RS08KA4CPJ, ensure the application firmware follows the RS08KAP background-debug-mode vector map and reserves the highest-address Flash sector for vector redirection. The 20-pin PDIP package is footprint-compatible with the broader RS08KA family (1 KB / 2 KB / 4 KB Flash density options), making it easy to migrate code between density tiers without PCB rework. This page synthesizes distributor pricing, package-correct drop-in alternatives inside the RS08KA family, and practical design notes not consolidated in any single vendor portal. Engineers evaluating cost-down replacements will find the same-brand density variants and the recommended alternatives list especially useful.

見積もり お問い合わせ
MC9RS08KA4CWG - 8-Bit 20MHz 4KB Flash MCU | NXP
MC9RS08KA4CWG

MC9RS08KA4CWG - 8-Bit 20MHz 4KB Flash MCU | NXP

The NXP Semiconductors MC9RS08KA4CWG is an 8-bit RS08KA microcontroller rated for operation up to 20 MHz, with 4 KB of flash program memory and 128 bytes of RAM, housed in a 16-pin SOIC package. It is intended for cost-sensitive, low-end embedded systems that require essential control functions, low-power modes, and a compact architecture. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output functions into one component. In the system hierarchy, this MCU belongs to the embedded-controller and integrated-circuit classes rather than to a general-purpose computer. Its small RS08 core is designed for compact control logic, allowing a product to replace separate logic devices while keeping the design economical. Key verified features include an 8-bit RS08 central processing unit, 20 MHz maximum CPU frequency, 4 KB flash organized as 4K x 8, and 128 bytes of RAM. The device is associated with the RS08KA general-purpose family for ultra-low-end applications. Its flash memory provides nonvolatile program storage, while RAM supports working variables and stack operations. The 16-SOIC package also offers a familiar surface-mount footprint for conventional PCB assembly. The MC9RS08KA4CWG is suitable for simple embedded controllers where the application does not require a large memory footprint or high computational throughput. It can be used in cost-sensitive control systems, small sensor interfaces, basic actuator controllers, household equipment, and low-power embedded products. The 20 MHz CPU rating provides a clear performance ceiling for designs using the RS08KA instruction set and peripheral resources. The device is listed as an NXP product with an end-of-life overview, so lifecycle planning should confirm availability, last-time-buy information, and any approved successor before new production designs are released. Because the target is not a power semiconductor, safe-operating-area data is not applicable. For PCB design, use the manufacturer pinout and package drawing for every connection, especially power, reset, clock, and I/O pins. Confirm the supported supply voltage, oscillator configuration, programming method, and peripheral multiplexing in the official datasheet. Keep traces short, provide appropriate decoupling near the supply pins, and validate the final firmware and timing on representative hardware. This product page combines the verified distributor identity, NXP lifecycle information, package and memory specifications, and engineering-oriented selection notes. It is intended to support sourcing and design review while clearly separating verified facts from details that require confirmation from the manufacturer datasheet.

見積もり お問い合わせ
MC9RS08KA4CWJ - RS08 8-bit MCU, 4KB Flash, 20MHz | NXP
MC9RS08KA4CWJ

MC9RS08KA4CWJ - RS08 8-bit MCU, 4KB Flash, 20MHz | NXP

NXP (formerly Freescale) MC9RS08KA4CWJ is an 8-bit RS08KA-series microcontroller delivering 4 KB of flash, 20 MHz CPU performance, and 4 GPIO pins in a 20-pin SOIC package for space-constrained, low-power embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral I/O on one silicon die. 8-bit MCUs occupy the ultra-low-end of the embedded hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. They are favored for cost-sensitive and energy-efficient applications such as simple motor control, user-interface button reading, sensor signal conditioning, and white-goods appliance logic, where 32-bit performance is overkill. The RS08 core is a streamlined HC08 subset designed by NXP specifically for small-memory, low-pin-count devices. Key features of the MC9RS08KA4CWJ include a 20 MHz maximum CPU clock, 4 KB of on-chip flash program memory, an integrated clock source to reduce external BOM, and an operating voltage range up to 5.5 V across the industrial -40C to +85C temperature range. The device targets the ultra-low-end market with RS08 architecture optimized for small-memory designs, providing a cost-effective path for simple control tasks. From an architectural standpoint, the RS08KA family uses a reduced instruction set compared to the legacy HC08, enabling a smaller die size and lower quiescent current. The internal oscillator eliminates an external crystal in many designs, further reducing both BOM cost and PCB area. The 20-pin SOIC package is footprint-compatible with the rest of the RS08KA family, which simplifies PCB reuse across KA1, KA2, KA4, and KA8 memory options. Typical applications include battery-powered sensors, simple user-interface controllers, low-cost appliance controls, LED lighting drivers, and consumer electronics where 4 GPIO pins and 4 KB of code space are sufficient. The wide operating voltage range makes it compatible with both 3.3 V and 5 V rails commonly found in industrial and white-goods designs. When designing with the MC9RS08KA4CWJ, plan for code size to remain within 4 KB of flash and reserve the four GPIO pins carefully. NXP documentation recommends leaving one pin for BKGD debugging if in-system programming is required, which reduces the practical GPIO budget to three pins for the application. This page synthesizes distributor pricing, drop-in KA-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9RS08KA4CWJR - RS08 8-bit MCU, 4KB Flash, 20MHz | NXP (Tape & Reel)
MC9RS08KA4CWJR

MC9RS08KA4CWJR - RS08 8-bit MCU, 4KB Flash, 20MHz | NXP (Tape & Reel)

NXP (formerly Freescale) MC9RS08KA4CWJR is an 8-bit RS08KA-series microcontroller delivering 4 KB of flash, 20 MHz CPU performance, and 4 GPIO pins in a 20-pin SOIC package for space-constrained, low-power embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral I/O on one silicon die. 8-bit MCUs occupy the ultra-low-end of the embedded hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. They are favored for cost-sensitive and energy-efficient applications such as simple motor control, user-interface button reading, sensor signal conditioning, and white-goods appliance logic, where 32-bit performance is overkill. The RS08 core is a streamlined HC08 subset designed by NXP specifically for small-memory, low-pin-count devices. Key features of the MC9RS08KA4CWJR include a 20 MHz maximum CPU clock, 4 KB of on-chip flash program memory, an integrated clock source to reduce external BOM, and an operating voltage range up to 5.5 V across the industrial -40C to +85C temperature range. The device targets the ultra-low-end market with RS08 architecture optimized for small-memory designs, providing a cost-effective path for simple control tasks. From an architectural standpoint, the RS08KA family uses a reduced instruction set compared to the legacy HC08, enabling a smaller die size and lower quiescent current. The internal oscillator eliminates an external crystal in many designs, further reducing both BOM cost and PCB area. The 20-pin SOIC package is footprint-compatible with the rest of the RS08KA family, which simplifies PCB reuse across KA1, KA2, KA4, and KA8 memory options. Typical applications include battery-powered sensors, simple user-interface controllers, low-cost appliance controls, LED lighting drivers, and consumer electronics where 4 GPIO pins and 4 KB of code space are sufficient. The wide operating voltage range makes it compatible with both 3.3 V and 5 V rails commonly found in industrial and white-goods designs. When designing with the MC9RS08KA4CWJR, plan for code size to remain within 4 KB of flash and reserve the four GPIO pins carefully. NXP documentation recommends leaving one pin for BKGD debugging if in-system programming is required, which reduces the practical GPIO budget to three pins for the application. This page synthesizes distributor pricing, drop-in KA-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9RS08KA8CPG - 8-Bit 20MHz RS08KA MCU | NXP
MC9RS08KA8CPG

MC9RS08KA8CPG - 8-Bit 20MHz RS08KA MCU | NXP

The NXP Semiconductors MC9RS08KA8CPG is an 8-bit RS08KA microcontroller operating up to 20 MHz, with 8 KB of Flash memory and a 4-channel ADC, in a 16-pin through-hole DIP package. The device targets cost-sensitive automotive and industrial controls and is listed by NXP with an End of Life overview. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and input/output functions on one semiconductor. In the product hierarchy, the RS08KA MCU is an 8-bit microcontroller, part of the RS08 family, and a general-purpose embedded-control component. This class of device is used to read sensors, control outputs, sequence system operations, and execute firmware without a separate processor. The verified device data identifies an RS08 CPU, 8-bit data-bus width, 20 MHz maximum clock frequency, 8 KB Flash, and a 4-channel ADC. The RS08KA series is described as suitable for cost-sensitive automotive and industrial applications. A 2.7 V minimum and 5.5 V maximum supply range appears in the supplied comparison data, while the general family description also states 5.5 V operation across the temperature range. The 16-pin DIP package is appropriate for prototypes, educational platforms, repair work, and through-hole industrial assemblies where a leaded package simplifies manual insertion and socket replacement. Unlike a surface-mount MCU, it requires adequate board spacing and through-hole routing, but it avoids a fine-pitch rework process. The package and pin compatibility of any substitute must be verified before it is treated as a drop-in replacement. Typical uses include low-cost automotive control modules, industrial switch and sensor interfaces, simple keypad controllers, compact instrumentation, and general embedded products. The ADC enables analog measurements, while the 8-bit CPU and 8 KB Flash provide a constrained platform for firmware that does not require high memory density or high processing throughput. The principal design consideration is lifecycle planning: the NXP product page indicates End of Life, so new production designs should confirm availability, migration options, and any approved successor before committing. For existing boards, preserve the original pinout, supply voltage, clock requirements, peripheral assignments, and programming method during replacement qualification. This page combines verified manufacturer and distributor information with package, sourcing, lifecycle, and design considerations. It does not infer unverified electrical values or claim a replacement unless a same-package, pin-compatible candidate can be supported by the supplied evidence.

見積もり お問い合わせ
MC9RS08KA8CPJ - 8-Bit RS08 MCU, 8KB Flash, 20-DIP | NXP
MC9RS08KA8CPJ

MC9RS08KA8CPJ - 8-Bit RS08 MCU, 8KB Flash, 20-DIP | NXP

The NXP MC9RS08KA8CPJ is an RS08KA-series 8-bit microcontroller built on NXP's RS08 core, delivering 20 MHz CPU performance with 8 KB of on-chip flash memory in a 20-pin PDIP (through-hole DIP-20) package. Designed as a general-purpose, ultra-low-end MCU, it offers an instruction-set subset of the HC08 family with a compact 8-bit data bus and an integrated peripheral set targeted at cost-sensitive consumer and industrial appliances. The RS08 family sits within the 8-bit microcontroller taxonomy in the broader microcontroller > processor > semiconductor hierarchy. It shares the HC08 instruction-set architecture lineage (HC08 > Freescale/NXP 8-bit > MCU > semiconductor device) but uses a streamlined register model and reduced peripheral set to hit aggressive price points for high-volume appliances, toys, and small-form-factor controllers. Key features include an 8-bit RS08 CPU at up to 20 MHz, 8 KB (8K x 8) flash program memory, multiple operating-voltage modes (2.5 V / 3.3 V / 5 V), 5.5 V absolute-maximum supply tolerance across the -40 °C to +85 °C temperature range, an integrated clock source, and an efficient low-power stop mode for battery-friendly designs. The PDIP-20 package is friendly to hobbyist, prototype, and low-volume through-hole assemblies. Typical applications include ultra-low-cost consumer appliances, simple sensor and motor controllers, white-goods user-interface boards, battery-powered handheld devices, and educational microcontroller platforms where HC08 toolchain familiarity and through-hole package simplicity shorten development cycles. When designing with this MCU, verify that the chosen toolchain (CodeWarrior IDE classic, CW for MCU v10.x, or third-party GCC/P&E ICD support) matches the part's RS08 debug interface, and budget flash endurance (typically 10 k cycles for this family) for any application that performs in-field firmware updates.

見積もり お問い合わせ
MC9RS08KA8CTG - 8KB Flash 20MHz RS08 8-bit MCU | NXP
MC9RS08KA8CTG

MC9RS08KA8CTG - 8KB Flash 20MHz RS08 8-bit MCU | NXP

The NXP Semiconductors (formerly Freescale) MC9RS08KA8CTG is an 8-bit RS08 microcontroller delivering up to 20 MHz CPU performance with 8 KB of on-chip flash memory and 254 B of RAM, housed in a 16-pin TSSOP package. According to the manufacturer datasheet, the device operates from 2.5 V to 5.5 V across the industrial temperature range of -40 C to +85 C, and integrates peripherals including an internal oscillator, ADC, timers, and 14 general-purpose I/O pins. What is an 8-bit microcontroller? An 8-bit microcontroller is a single-chip computer that uses an 8-bit data path, combining a CPU, program memory (typically flash), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The MC9RS08KA8CTG belongs to the RS08 family — a streamlined, ultra-low-cost core architecture that is a subset of the well-established HC08 instruction set, with added BGND (background debug) instructions for in-circuit programming. Within the broader taxonomy, this places the part as: MCU -> microcontroller -> embedded processor -> semiconductor device. Key features of the MC9RS08KA8CTG include an 8-bit RS08 CPU at 20 MHz, 8 KB flash program memory, 254 B of RAM, 14 GPIO pins, an internal oscillator, and an integrated analog-to-digital converter. The 20 MHz core provides 50 ns instruction-cycle time, which is sufficient for appliance control, consumer electronics, lighting, and simple sensor interfaces. The 16-pin TSSOP (4.40 mm body width) footprint offers a compact, surface-mount form factor that fits easily on space-constrained boards. The part uses the second-generation RS08 core, which is optimized for cost-sensitive, deterministic control applications. Its flash memory supports in-application reprogramming via the background debug mode (BDM), enabling firmware updates in the field without removing the device from the board. The wide 2.7 V to 5.5 V operating range makes it compatible with both 3.3 V and 5 V system rails typical of legacy appliance and industrial designs. Typical applications include home appliances such as washing machines, microwaves, and rice cookers; small motor control for fans and pumps; LED lighting and dimmer controllers; battery chargers and simple power tools; remote controls; and consumer electronic accessories. The combination of low cost, sufficient peripherals, and NXP's legacy automotive-grade pedigree makes it well-suited for high-volume consumer products that need a balance of capability and unit price. When designing with this device, note that the part is part of NXP's older RS08 product line that has been declared End of Life (EOL) per the manufacturer's product page. Designers should verify long-term availability before committing to new production runs, and plan for last-time-buy or migrate to active Kinetis or S08 replacements such as the MC9S08PA16 or S08PT family. This page synthesizes distributor pricing, drop-in compatible pin-to-pin replacements from the MC9RS08 family, and practical design notes that go beyond the manufacturer datasheet to help engineers plan an EOL migration path.

見積もり お問い合わせ