マイクロコントローラ

製品 (20,000+)

PIC16F15243-E/SO - 8-bit MCU, 3.5KB Flash, 20-Pin SOIC | Microchip
PIC16F15243-E/SO

PIC16F15243-E/SO - 8-bit MCU, 3.5KB Flash, 20-Pin SOIC | Microchip

The Microchip Technology PIC16F15243-E/SO is an 8-bit enhanced mid-range microcontroller from the PIC16F152xx family with 3.5 KB Flash program memory, 256 B RAM, and a 10-bit ADC, packaged in a 20-pin SOIC (SO). It executes instructions at up to 32 MHz and features Core Independent Peripherals (CIPs), Peripheral Pin Select (PPS), and an eXtreme Low-Power (XLP) Sleep mode suitable for battery-powered applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), volatile working memory (RAM), and a set of on-chip peripherals into one package. PIC microcontrollers use a Harvard-architecture CPU with a RISC-like instruction set, separating program and data memory buses. Within Microchip's taxonomy, the PIC16F152xx belongs to the enhanced mid-range core family, positioned between the baseline PIC10/12/16 families and the high-performance PIC18 family, and tailored for cost-sensitive sensor and real-time control tasks. Key features of the PIC16F15243 include 3.5 KB self-read/write Flash, 16 stack levels, two 10-bit PWMs, two Capture/Compare/PWM (CCP) modules, a Hardware Limit Timer (HLT), Watchdog Timer (WDT), PPS for flexible I/O mapping, EUSART (UART with LIN) and MSSP (SPI/I2C) communication, a 10-bit ADC with internal fixed-voltage reference, and eXtreme Low-Power Sleep mode. The 'E' suffix denotes an extended temperature grade of -40C to +125C. The 20-pin SOIC package gives access to up to 18 general-purpose I/O pins via PPS, and the small outline footprint is suited for hand-soldered prototypes and high-density production boards alike. PPS allows most digital peripherals to be routed to almost any I/O pin, simplifying PCB layout and BOM reuse across the PIC16F152xx family. Combined with CIPs such as the Hardware Limit Timer, the device can service sensors, switches, and communication lines without CPU intervention, freeing the core for application logic. Typical applications include low-power IoT sensor nodes, battery-powered remote controls, LED lighting controllers, white-goods and small-appliance control boards, and LIN-node automotive body electronics using the on-chip EUSART with LIN slave support. Designers value the XLP Sleep mode for multi-year coin-cell lifetimes and the PPS flexibility for layout reuse. When designing with the PIC16F15243-E/SO, leave VDD/VSS decoupling within 5 mm of the pins, configure the Configuration Words for the desired oscillator and WDT behavior, and use PPS to keep high-speed signals (EUSART, MSSP) on adjacent pins to simplify routing. Verify ADC reference selection against the application noise budget, and ensure unused I/O pins are configured as outputs low to minimize Sleep current. This page synthesizes distributor pricing, drop-in same-family alternates, and practical design notes that go beyond the manufacturer datasheet summary, helping procurement and design engineers evaluate the PIC16F15243-E/SO for both new designs and as a drop-in swap on existing 20-pin SOIC boards.

見積もり お問い合わせ
PIC16F15243-E/SS - 8-bit 32MHz 3.5KB Flash MCU 20-SSOP | Microchip
PIC16F15243-E/SS

PIC16F15243-E/SS - 8-bit 32MHz 3.5KB Flash MCU 20-SSOP | Microchip

The Microchip Technology PIC16F15243-E/SS is an 8-bit PIC microcontroller with a 32 MHz enhanced mid-range core, 3.5 KB of self-read/write Flash program memory, 256 bytes of RAM, and a 20-pin SSOP package. It is part of the PIC16F152xx family, which integrates core-independent peripherals, intelligent analog, and standard communication modules while supporting eXtreme Low Power (XLP) sleep modes for battery-friendly designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die. The PIC16 architecture uses a Harvard RISC design with a 14-bit instruction word, and the 16F152xx sub-family specifically adds 49 instructions, 16 stack levels, and a Peripheral Pin Select (PPS) routing fabric. In the system hierarchy this MCU sits inside the 8-bit MCU class, within embedded microcontrollers, inside the broader Integrated Circuits category. Key features include 12 channels of 10-bit ADC, two PWM channels, two CCP modules, a hardware limit timer (HLT), a windowed watchdog timer (WDT), PPS, an EUSART (UART with LIN), an MSSP module that handles both SPI and I2C (master/slave), and a clock out function. The -E/SS suffix designates the -40C to +125C extended operating temperature range in a 20-pin SSOP package. Typical applications include functional-safety sensor nodes, low-power IoT edge devices, appliance user-interface controllers, LED lighting control, and general-purpose 8-bit embedded logic replacement. Functional-safety customers (FuSa) particularly value the documentation package and core-independent peripherals that simplify deterministic loop design. Design consideration: because this part uses PPS, every peripheral signal can be remapped to most digital I/O pins, but only one signal can occupy a pin at a time - always check the PPS assignment table when porting code between 14-pin and 20-pin PIC16F152xx variants. The 20-SSOP footprint is industry-standard and reflow-compatible with Pb-free profiles. This page synthesizes current distributor stock, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet introduction, helping engineers select the right 8-bit MCU for low-power embedded designs.

見積もり お問い合わせ
PIC16F15243-I/REB - 8-bit 32MHz MCU, 3.5KB Flash, 20-VQFN | Microchip
PIC16F15243-I/REB

PIC16F15243-I/REB - 8-bit 32MHz MCU, 3.5KB Flash, 20-VQFN | Microchip

The Microchip Technology PIC16F15243-I/REB is an 8-bit PIC microcontroller with a 32MHz CPU, 3.5KB (2K x 14) Flash program memory, 256B RAM, and 10-bit ADC, housed in a 20-pin VQFN (3x3 mm) package. It targets Functional Safety (FuSa) applications with on-chip Core Independent Peripherals (CIPs), two PWM/CCP modules, EUSART, SPI/I2C, and an eXtreme Low-Power (XLP) sleep mode. What is a PIC16 8-bit microcontroller? A PIC16F microcontroller is a low-power, mid-performance 8-bit RISC MCU family from Microchip built on a Harvard architecture with separate program and data buses. The PIC16F152xx sub-family adds Core Independent Peripherals (CIPs) - hardware state machines that run without CPU intervention - and Intelligent Analog on-chip peripherals, sitting in the power-management and embedded control hierarchy between simple 8-bit MCUs and 32-bit Cortex-M parts. Key features include 32MHz internal oscillator operation, 3.5KB Flash self-programmable memory, hardware PPS (Peripheral Pin Select), Hardware Limit Timer (HLT), Windowed Watchdog Timer (WDT), and the XLP sleep mode with nanoWatt leakage. The 20-VQFN package has an exposed thermal pad and a compact 3x3 mm footprint suitable for space-constrained PCB designs. Peripherals include a 10-bit ADC with Computation (ADC2) for automated averaging and threshold comparison. Typical applications include sensor nodes, IoT edge devices, battery-powered instruments, appliance controls, lighting ballasts, and safety-capable embedded subsystems. The Functional Safety documentation and FMEDA support enable integration into IEC 61508 SIL 2 designs when paired with a safety manual and proper diagnostic coverage at the system level. When designing with this device, allocate pins carefully because PPS lets most digital peripherals be remapped to multiple I/O pins. Ensure decoupling capacitors are placed within 3mm of VDD and VSS. Use the ADC2 Computation mode for oversampling to reduce software overhead in sensor acquisition loops. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the standalone Microchip datasheet. Pin-compatible variants in PDIP, SOIC, SSOP, and TSSOP packages are listed in the alternatives section for PCB layout reuse.

見積もり お問い合わせ
PIC16F15243-I/SS - 8-bit MCU, 3.5KB Flash, 20-SSOP | Microchip
PIC16F15243-I/SS

PIC16F15243-I/SS - 8-bit MCU, 3.5KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16F15243-I/SS is an 8-bit PIC16 microcontroller from the PIC16F152xx low pin count family, delivering 32 MHz CPU performance from 3.5 KB (2K x 14) of self-programmable Flash program memory and 256 bytes of SRAM in a 20-pin SSOP package. The -I suffix indicates the industrial temperature grade (-40C to +85C). Functional safety (FuSa) support and core-independent peripherals (CIPs) make this part suitable for safety-critical and real-time control applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O peripherals, and often communication interfaces and analog blocks. The PIC16 family uses a RISC-based 8-bit core with a modified Harvard architecture, where program and data buses are separate to allow simultaneous instruction fetch and data access. Within the broader taxonomy, an MCU belongs to embedded microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. Key features of the PIC16F15243 include a 10-bit ADC with up to 12 input channels, two 10-bit PWMs, two CCP modules, Peripheral Pin Select (PPS) for flexible signal routing, EUSART plus SPI and I2C communication, hardware limit timer (HLT), windowed watchdog timer (WDT), and eXtreme Low-Power (XLP) Sleep modes for battery-powered designs. The FuSa-ready architecture supports functional safety documentation required by IEC 61508 and similar standards. The PIC16F15243 architecture integrates a 10-bit ADC with Device Information Area (DIA) calibration for offset compensation, plus a Fixed Voltage Reference (FVR) to enhance ADC accuracy. PPS allows remapping of digital peripherals to multiple I/O pins, simplifying PCB routing. The Memory Access Partition (MAP) supports bootloader and data protection schemes, while the eXtreme Low-Power Sleep mode delivers nanoamp-level standby current for energy harvesting applications. Typical applications include low-cost sensor nodes, battery-powered IoT end devices, appliance control boards, LED lighting drivers, HVAC fan controllers, and consumer electronics requiring functional safety features. PPS flexibility is particularly valuable when designers must route SPI or I2C signals to alternate pins to simplify board layout. When designing with this device, ensure your programmer/debugger supports the PIC16F152xx device ID. Microchip's MPLAB X IDE with XC8 compiler and the PICkit 5 or SNAP debugger are typical toolchains. Always review the latest family datasheet for electrical specifications before committing to production layouts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - enabling faster design decisions for engineers evaluating the PIC16F15243-I/SS for sensor and real-time control applications.

見積もり お問い合わせ
PIC16F15243T-I/REB - 8-bit MCU, 3.5KB Flash, 32MHz, 20-VQFN | Microchip
PIC16F15243T-I/REB

PIC16F15243T-I/REB - 8-bit MCU, 3.5KB Flash, 32MHz, 20-VQFN | Microchip

The Microchip PIC16F15243T-I/REB is an 8-bit PIC microcontroller from the PIC16F152xx family, featuring 3.5KB Flash program memory, 256 bytes RAM, and a 32MHz internal core, housed in a 20-pin VQFN (3x3 mm) package. It integrates a 10-bit ADC, two PWM modules, two CCP modules, hardware limit timer (HLT), watchdog timer (WDT), peripheral pin select (PPS), EUSART, SPI/I2C, and eXtreme Low-Power (XLP) Sleep mode, designed for cost-sensitive sensor and real-time control applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating a CPU, memory (Flash/RAM), and peripherals on a single die. PIC microcontrollers sit within the broader hierarchy of embedded microcontrollers -> microcontrollers -> microprocessors/memory ICs -> integrated circuits -> semiconductors, and are widely used in cost-optimized embedded designs due to their deterministic instruction set and rich peripheral integration. Key features of the PIC16F15243 include Functional Safety (FuSa) support, Core Independent Peripherals (CIPs) for offloading CPU tasks, intelligent analog peripherals, and standard communication modules. The 32MHz operation delivers 8 MIPS instruction throughput, and the XLP Sleep mode enables nanoWatt sleep currents suitable for battery-powered sensor nodes. The 20-VQFN package supports compact board layouts in space-constrained IoT products. Architecturally, the PIC16F15243 uses Microchip's enhanced mid-range core with a 14-bit instruction word, hardware multiplier, and interrupt-driven peripheral integration. The device operates from 1.8V to 5.5V and includes fail-safe clock monitoring for functional safety compliance. PPS allows flexible pin-to-peripheral mapping, simplifying PCB routing and BOM reuse across multiple SKUs in a product family. Typical applications include IoT sensor nodes, home appliance control, LED lighting controllers, battery-powered instruments, and industrial sensor interfaces. The integrated 10-bit ADC and PWM modules also suit closed-loop control tasks such as motor speed control and temperature regulation. When designing with this MCU, ensure the ICSP programming pins are accessible for in-circuit firmware updates, and route the VQFN exposed pad to a continuous ground copper pour for thermal dissipation and EMI performance. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F152xx family, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F15243T-I/SO - 8-bit MCU, 3.5KB Flash, 20-SOIC | Microchip
PIC16F15243T-I/SO

PIC16F15243T-I/SO - 8-bit MCU, 3.5KB Flash, 20-SOIC | Microchip

The Microchip Technology PIC16F15243T-I/SO is an 8-bit PIC microcontroller from the PIC16F152xx family, featuring 3.5KB Flash program memory (2K x 14 words), 256 bytes of SRAM, and a 32 MHz CPU core, housed in a 20-pin SOIC package. This tape-and-reel variant ships in industrial temperature grade (-40C to +85C) and supports a wide operating voltage range from 1.8V to 5.5V. The part targets cost-sensitive sensor and real-time control applications where low power and small footprint are essential. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals on a single silicon die. The PIC architecture uses a Harvard design with separate program and data buses, a RISC instruction set, and deterministic instruction timing. Within the broader hierarchy, an MCU belongs to the category of microcontrollers -> microprocessors -> semiconductors -> integrated circuits. The PIC16F152xx family in particular targets Core Independent Peripherals (CIPs), Intelligent Analog, and standard communication in compact pin-count packages. Key features include a 10-bit Analog-to-Digital Converter (ADC) with internal voltage reference, two PWM modules, two Capture/Compare/PWM (CCP) peripherals, Peripheral Pin Select (PPS) for flexible I/O routing, hardware limit timer (HLT), watchdog timer (WDT), and the standard EUSART plus SPI/I2C communication modules. The XLP (eXtreme Low-Power) Sleep mode with nanowatt-level standby current enables battery-powered sensor applications that must operate for years on a single cell. The PIC16F15243 architecture uses an enhanced mid-range 16-bit instruction word core optimized for C-code efficiency and fast interrupt response. On-chip peripherals are interconnected through the Microchip proprietary CIP bus, allowing the ADC, PWM, and timers to operate without CPU intervention, freeing the core for application logic. Functional Safety (FuSa) features support IEC 61508 SIL-2 capable system designs per the datasheet. Typical applications include IoT sensor nodes, battery-powered wireless remote controls, low-cost home appliances, white goods user interfaces, LED lighting controllers, and small motor-control subsystems. The compact 20-SOIC footprint fits hand-held enclosures and densely populated PCBs. Designers should evaluate RAM headroom (256 bytes is tight for buffered protocols), pick a programming/debug adapter from the PICkit/SNAP/MPLAB ICD family, and follow the datasheet recommended decoupling scheme (typically 100 nF plus 10 uF bulk near VDD). Migration within the PIC16F152xx family is straightforward when scaling memory or peripheral needs. This page synthesizes distributor pricing, drop-in alternatives from the same family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F15244-E/SO - 8-bit PIC16 MCU, 7KB Flash, SOIC-20 | Microchip
PIC16F15244-E/SO

PIC16F15244-E/SO - 8-bit PIC16 MCU, 7KB Flash, SOIC-20 | Microchip

The Microchip Technology PIC16F15244-E/SO is an 8-bit RISC microcontroller built on the PIC16 CPU core with a maximum clock frequency of 32 MHz, packaged in a 20-pin SOIC (SO) wide-body plastic small-outline IC. The device ships with 7.168 KB of self-programmable Flash program memory, 512 bytes of SRAM, and 18 bytes of data EEPROM, addressing cost-sensitive sensor and real-time control designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of programmable peripherals. The PIC16F152xx family is positioned inside the broader PIC16 mid-range family (an 8-bit PIC MCU family), itself part of Microchip's 8-bit MCU portfolio that competes with other 8-bit architectures for embedded control. As a Flash-based MCU, the PIC16F15244 supports in-circuit serial programming (ICSP) and field re-programmability, which lowers lifecycle cost for production and field updates. Key features include a 10-bit ADC with multiple channel options, two PWM modules, two CCP (Capture/Compare/PWM) modules, hardware limit timer (HLT), watchdog timer (WDT), peripheral pin select (PPS), EUSART, SPI, and I2C. The device operates from 1.8 V to 5.5 V across an industrial -40 C to +125 C temperature range and supports the eXtreme Low-Power (XLP) SLEEP mode for battery-aware designs. According to Microchip product documentation, the PIC16F15244 family adds Core Independent Peripherals (CIPs) and Intelligent Analog blocks that offload tasks from the CPU. Architecturally, the part uses a Harvard RISC architecture with separate program and data buses, plus the enhanced mid-range instruction set, which gives deterministic interrupt latency for real-time loops. The wide SOIC-20 (SO) footprint and PPS-based I/O remapping simplify PCB layout reuse across the PIC16F152xx family; Microchip's migration guide notes that PIC16F15244 devices serve as direct drop-in replacements for legacy PIC12F parts in SOIC packages. Typical applications include IoT sensor nodes, industrial automation modules, consumer appliance control boards, battery-powered measurement instruments, and compact motor/lighting controllers. For designs migrating from older PIC12F or PIC16F1xxx parts, the SOIC-20 footprint and PPS simplify schematic carry-over. When designing with this MCU, plan for decoupling capacitors on VDD/AVDD, follow Microchip's recommended decoupling guidance, and verify that your chosen compiler (XC8) version supports the PIC16F15244 device header. Production programmers such as MPLAB SNAP, PICkit 4, or MPLAB ICD 4 are compatible for in-circuit debug. This page synthesizes distributor stock signals, parametric drop-in alternatives, application guidance, and design notes drawn from Microchip's PIC16F15244 family documentation and community validation resources.

見積もり お問い合わせ
PIC16F15244-I/P - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F15244-I/P

PIC16F15244-I/P - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F15244-I/P is an 8-bit PIC microcontroller from the PIC16F152xx family, featuring a 32 MHz enhanced mid-range core, 7 KB (4K x 14) of self-read/write Flash program memory, 512 bytes of RAM, and a 10-bit ADC, packaged in a 20-pin PDIP (P) through-hole format for industrial temperature applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and integrated peripherals such as ADCs, timers, and communication modules. The PIC16F152xx family positions itself in the hierarchy as an 8-bit MCU -> mid-range MCU -> enhanced mid-range core MCU -> embedded controller, designed for cost-sensitive sensor and real-time control applications. The 8-bit architecture remains optimal for low-power, deterministic control tasks where 16/32-bit parts would be over-spec. Key features include Core Independent Peripherals (CIPs) such as two PWM modules and two CCP (Capture/Compare/PWM) channels, a 10-bit Analog-to-Digital Converter (ADC), Intelligent Analog with computation, Peripheral Pin Select (PPS) for flexible I/O routing, and standard communication peripherals including EUSART (Enhanced UART) and MSSP supporting both SPI and I2C. eXtreme Low Power (XLP) technology enables sleep currents in the nanoampere range with multiple wake sources. The PIC16F15244 uses the enhanced mid-range core with 49 instructions, 16 stack levels, and a hardware multiplier. The instruction set is orthogonal, simplifying code generation, while the Flash program memory supports self-read/write for in-application firmware updates. PPS allows most digital peripherals to be remapped to multiple I/O pins, simplifying PCB layout and enabling flexible system design. Typical applications include IoT sensor nodes, real-time control loops, consumer appliances, low-cost motor control, and battery-powered devices where sleep current dominates average consumption. Functional Safety (FuSa) capability suits industrial sensor monitoring, building automation, and appliance controllers requiring IEC 61508-compatible documentation. When designing with this MCU, reserve adequate Flash/RAM headroom for future firmware updates, use PPS to assign peripherals after final PCB layout, and pair the device with an external 32 kHz crystal or internal oscillator when low-power sleep accuracy is required. The 20-pin PDIP package supports easy prototyping and through-hole assembly for low-noise analog applications. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F15244-I/REB - 8-bit MCU, 7KB Flash, 32MHz, 20-VQFN | Microchip
PIC16F15244-I/REB

PIC16F15244-I/REB - 8-bit MCU, 7KB Flash, 32MHz, 20-VQFN | Microchip

The Microchip Technology PIC16F15244-I/REB is an 8-bit PIC microcontroller from the PIC16F152xx family, delivering 32MHz CPU performance with 7KB (4K x 14 words) of Flash program memory in a compact 20-pin VQFN (3x3mm) package. This device is engineered for cost-sensitive sensor and real-time control applications and is part of Microchip's Functional Safety (FuSa) capable portfolio. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a configurable set of peripheral modules on one die. The PIC16F152 family belongs to Microchip's enhanced mid-range 8-bit core architecture, which falls under the broader category of embedded microcontrollers and semiconductor ICs. Designers choose 8-bit MCUs like the PIC16F15244 when deterministic response, ultra-low sleep current, and a small footprint outweigh the need for 32-bit computational throughput. Key features include 7KB Flash program memory, 512B RAM, a 10-bit ADC, two PWM modules, two CCP (Capture/Compare/PWM) peripherals, a hardware limiter (HLT), a windowed watchdog timer (WDT), Peripheral Pin Select (PPS) for flexible signal routing, one EUSART, SPI/I2C, and an eXtreme Low-Power (XLP) SLEEP mode. The PPS module allows digital peripherals to be reassigned to different I/O pins at runtime, simplifying PCB routing. The Functional Safety capability assists designers targeting IEC 61508 SIL-2 systems. The PIC16F15244 uses the enhanced mid-range 8-bit Harvard core with a 14-bit instruction word, providing deterministic interrupt latency and single-cycle hardware multiply (via the HLT). Core Independent Peripherals (CIPs) such as the CCP and PWM can operate without CPU intervention, reducing firmware complexity and power consumption. The device operates from 1.8V to 5.5V across an industrial -40C to +85C temperature range. Typical applications include consumer IoT sensor nodes, battery-powered home automation, low-cost motor control (small DC fans, BLDC pumps), LED lighting controllers, capacitive-touch user interfaces, and remote controls. Its tiny 3x3mm VQFN footprint enables placement in space-constrained wearable and handheld designs. A key design consideration is that the 3x3mm VQFN package has limited thermal dissipation; sustained high-current GPIO toggling will require PCB copper-pour thermal relief. Designers should also verify the PPS mapping for each peripheral before layout finalization. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F15244-I/SS - 8-bit MCU, 32MHz, 7KB Flash, 20-Pin | Microchip
PIC16F15244-I/SS

PIC16F15244-I/SS - 8-bit MCU, 32MHz, 7KB Flash, 20-Pin | Microchip

The Microchip Technology PIC16F15244-I/SS is an 8-bit enhanced mid-range microcontroller built around a 32MHz internal core, integrating 7KB of self-read/write Flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM in a 20-pin SSOP (SS) package. Functional Safety (FuSa) ready hardware features, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology combine to deliver a robust yet efficient platform for cost-sensitive sensor and real-time control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces on one die. PIC microcontrollers sit within the broader category of microcontrollers -> embedded microprocessors -> digital ICs -> integrated circuits, where 8-bit MCUs remain dominant in cost-optimized, deterministic control loops where power efficiency, interrupt latency, and small pin counts matter more than raw compute throughput. The PIC16F152xx family specifically targets applications requiring more on-chip intelligence than a basic GPIO expander while staying inside the 8-bit cost envelope. Key features include Peripheral Pin Select (PPS) for flexible signal routing, a 10-bit ADC with computation, a 5-bit DAC, two comparators, an 8-bit timer (TMR0), 16-bit Timer1/3, an 8-bit TMR2 with periodic interrupt, a hardware Universal Asynchronous Receiver Transmitter (EUSART), and a Master Synchronous Serial Port supporting both SPI and I2C. The 20-pin SSOP package exposes 18 I/O pins after power and ground allocations. Core Independent Peripherals such as the Configurable Logic Cell (CLC) and Complementary Waveform Generator (CWG) enable complex timing, motor-control, and signal-conditioning tasks to run without CPU intervention. Typical applications span appliance control, LED lighting drivers, sensor signal conditioning, automotive body electronics, consumer white goods, industrial IoT edge nodes, and small form-factor human-machine interface boards. The combination of XLP sleep currents, fast wake-up, and on-chip CIPs allows battery-powered designs to operate for years on a single cell. When designing with this part, allocate 4 I/O for the In-Circuit Serial Programming (ICSP) interface (ICSPCLK/ICSPDAT plus VPP/MCLR) if you require field re-flash capability. Always decouple VDD with a 100nF ceramic placed within 5mm of the pin, and follow Microchip AN-383 "Microcontroller Board Design" PCB guidelines to keep ADC readings clean. This page synthesizes distributor pricing, drop-in SSOP-20 alternatives from the same PIC16F152xx family, and practical design notes - information gain that complements the manufacturer datasheet without replacing it.

見積もり お問い合わせ
PIC16F15244T-I/REB - 8-Bit MCU 7KB Flash 32MHz 20-VQFN | Microchip
PIC16F15244T-I/REB

PIC16F15244T-I/REB - 8-Bit MCU 7KB Flash 32MHz 20-VQFN | Microchip

The Microchip PIC16F15244T-I/REB is an 8-bit PIC microcontroller from the PIC16F152xx functional-safety (FuSa) family, delivering 32 MIPS performance from a 32 MHz internal oscillator and housed in a 20-pin VQFN (3x3 mm) package with exposed pad. The device integrates 7 KB of self-programmable Flash, 512 bytes of RAM, and 256 bytes of EEPROM, with operating voltage from 1.8V to 5.5V across the industrial -40C to +85C range. The /REB suffix indicates the tape-and-reel VQFN package with industrial temperature grade. A PIC16 microcontroller is an 8-bit Harvard-architecture RISC MCU widely used in cost-sensitive embedded control. The PIC16F152xx family extends this legacy by adding Functional Safety (FuSa) support, Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), and eXtreme Low-Power (XLP) sleep modes that drop quiescent current to the nanoampere range - features that place the PIC16F15244 within the broader hierarchy of microcontroller -> embedded controller -> semiconductor IC. Key features include a 10-bit Analog-to-Digital Converter (ADC) with up to 12 channels, two 10-bit PWMs, two Capture/Compare/PWM (CCP) modules, Peripheral Pin Select (PPS) for flexible I/O routing, and standard serial interfaces including EUSART, SPI, and I2C. The on-chip high-performance 32 MHz oscillator eliminates an external crystal in many designs, while the Windowed Watchdog Timer (WWDT) and Hardware Limit Timer (HLT) support safety-critical firmware. The architecture pairs a RISC core with intelligent analog (10-bit ADC, internal voltage reference) and digital (CLC, NCO, PWM) peripherals, allowing sensor interfacing, motor control loops, and safety handshakes to run without CPU intervention. Functional-safety collateral such as FMEDA and diagnostic libraries targets IEC 61508 SIL-2 capable designs when the datasheet-recommended firmware patterns are followed. Typical applications include industrial sensor nodes, building-automation controllers, low-power IoT end-points, LED lighting control, consumer appliances, and functional-safety subsystems such as appliance motor monitoring or smoke/CO detector signal chains. The compact 3x3 mm VQFN package suits space-constrained PCBAs. When designing with this device, select MPLAB X IDE with XC8 compiler and configure PPS registers to remap peripheral functions to physical pins. Always route the exposed thermal pad to a continuous ground plane for thermal dissipation and EMI performance, and place 100 nF decoupling capacitors within 3 mm of each VDD pin per Microchip's recommended layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, accelerating your part-selection and PCB layout decisions for PIC16F15244-based designs.

見積もり お問い合わせ
PIC16F15244T-I/SO - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F15244T-I/SO

PIC16F15244T-I/SO - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F15244T-I/SO is an 8-bit PIC microcontroller with 32 MHz CPU speed, 7 KB (4K x 14) Flash program memory, and Functional Safety (FuSa) support, housed in a 20-pin SOIC package. Operating from 1.8V to 5.5V, it provides 512 bytes of RAM, 256 bytes of EEPROM, and a 10-bit ADC. An 8-bit microcontroller (MCU) is a small, low-cost, single-chip computer that integrates a CPU, program memory (Flash), data RAM, and peripherals such as ADC, timers, and communication interfaces. MCUs sit in the embedded-system hierarchy above sensors and below system-on-modules, executing firmware that reads inputs, processes logic, and drives outputs. The PIC16F152xx family specifically targets cost-sensitive sensor and real-time control applications with a streamlined CIP (Core Independent Peripheral) set and eXtreme Low-Power (XLP) Sleep modes for battery-powered designs. Key features of the PIC16F15244T-I/SO include a 32 MHz internal oscillator, 10-bit ADC with up to 12 channels, two PWM modules, two CCP (Capture/Compare/PWM) modules, hardware Limit Timer (HLT), Watchdog Timer (WDT), Peripheral Pin Select (PPS), EUSART, and SPI/I2C interfaces. The XLP Sleep Mode reduces quiescent current for battery applications, and Memory Access Partition (MAP) supports bootloader and FuSa-grade isolation between non-secure and secure firmware regions. The device uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, providing deterministic interrupt latency and a single-cycle instruction execution at 32 MHz. PPS allows digital peripheral pin reassignment, which simplifies PCB layout and reduces design rework. Functional Safety features make the part suitable for safety-critical appliance, industrial sensor, and home-automation designs targeting IEC 60730 Class B. Typical applications include consumer appliance control, IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, and small motor/valve control loops. The wide 1.8V-5.5V operating range and integrated analog make the part drop-in friendly for portable, mains-bucked, and rechargeable-battery designs. When designing with this device, place decoupling capacitors within 2 mm of VDD/AVDD pins, avoid driving ADC inputs with high-impedance sources without a buffer, and verify unused I/O pin configuration (input or output, never floating) to minimize Sleep-mode current draw. Use PPS only on digital peripherals to maintain ADC reference integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including comparison data against same-family and cross-brand 20-pin 8-bit MCU alternatives.

見積もり お問い合わせ
PIC16F15245-E/SO - 32MHz 8-bit MCU 14KB Flash SOIC-20 | Microchip
PIC16F15245-E/SO

PIC16F15245-E/SO - 32MHz 8-bit MCU 14KB Flash SOIC-20 | Microchip

The Microchip Technology PIC16F15245-E/SO is an 8-bit RISC microcontroller from the PIC16F152xx family, featuring a 32MHz enhanced mid-range core, 14KB (8K x 14) of self-read/write Flash program memory, 1KB SRAM, and 256 bytes of EEPROM, all housed in a 20-pin SOIC package. It integrates a 10-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, two PWM channels, an EUSART, MSSP (SPI/I2C), Peripheral Pin Select (PPS), Hardware Limit Timer (HLT), Watchdog Timer (WDT), and eXtreme Low-Power (XLP) sleep mode, while delivering up to 18 general-purpose I/O lines. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that executes one byte per instruction cycle; PIC MCUs sit in the broader taxonomy of microcontroller -> embedded computing device -> semiconductor IC. The PIC16F15245 belongs to Microchip's enhanced mid-range PIC16 family, which uses a 14-bit instruction word and a 16-level hardware stack, offering a balance of deterministic real-time control, low power consumption, and Core Independent Peripherals (CIPs) that offload tasks from the CPU. This class of MCU is widely used in cost-sensitive sensor and real-time control designs where deterministic response and low quiescent current matter more than raw compute throughput. Key features of the PIC16F15245-E/SO include its 32MHz internal oscillator (8MHz with 4x PLL), 14KB Flash, 1KB RAM, 10-bit ADC with internal voltage reference and computation modes, two CCP and two PWM peripherals, and Microchip's eXtreme Low-Power XLP sleep mode with nanoWatt XLP technology. The Peripheral Pin Select (PPS) block allows flexible remapping of digital peripherals to any I/O pin, which simplifies PCB routing and supports multiple communication stacks on a fixed pinout. On-chip Core Independent Peripherals such as the Hardware Limit Timer (HLT) and Configurable Logic Cell (CLC) let state machines and timing-critical loops run without CPU intervention. Typical applications include sensor node conditioning and IoT edge devices, low-power battery-powered consumer products, home automation controllers, white-goods user-interface boards, LED lighting drivers with PWM dimming, and cost-sensitive industrial control logic. The combination of 14KB Flash, 1KB RAM, PPS, and the 10-bit ADC with computation (ADC2) also makes this device well suited to PID-style closed-loop control, multi-channel sensor readout, and simple user-interface HMI designs that need reliable real-time response. When designing with this part, note that the 'E' suffix designates the extended (-40C to +125C) operating temperature range and 'SO' is the 20-pin SOIC (300-mil) package. PPS remapping must be configured before enabling peripheral output, and the ADC's computation modes benefit from a dedicated 1.2V band-gap reference for ratiometric measurements. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F15245-I/P - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F15245-I/P

PIC16F15245-I/P - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15245-I/P is an 8-bit PIC microcontroller based on the enhanced mid-range PIC16 CPU core, delivering up to 32 MHz of operation with 14 KB of Flash program memory and 1024 bytes of SRAM, housed in a 20-pin PDIP (P) through-hole package. The device integrates a 10-bit ADC, two PWM modules, two CCP capture/compare/PWM peripherals, a hardware limiter (HLT), watchdog timer, Peripheral Pin Select (PPS), EUSART, SPI, and I2C, all while supporting eXtreme Low-Power (XLP) Sleep mode for battery-driven designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, optimized for cost-sensitive embedded control. Within the broader taxonomy, the PIC16F15245 sits as: 8-bit MCU -> PIC16 family -> enhanced mid-range core -> PIC16F152xx sub-family -> 20-pin general-purpose Flash MCU. It belongs to the wider category of microcontrollers -> microprocessors -> semiconductors -> integrated circuits. The 20-pin PDIP package provides easy prototyping and breadboard compatibility, making this variant particularly attractive for development, education, and low-volume production. Key differentiating features include the Peripheral Pin Select (PPS) which allows user-defined remapping of digital peripherals to I/O pins, the 10-bit ADC with internal voltage reference for sensor interfacing, and Core Independent Peripherals (CIPs) that operate without CPU intervention. The XLP Sleep mode enables nanoWatt-class standby current, making the part suited for battery-powered IoT end nodes. The hardware limiter (HLT) provides hardware-based signal conditioning without software overhead. The PIC16F15245 implements Microchip's enhanced mid-range 16-bit instruction set architecture with a hardware multiplier, providing deterministic interrupt latency and 35 instructions for compact code generation. Its internal 32 MHz oscillator eliminates the need for an external crystal in many applications, while optional clock modes support lower frequencies for power-sensitive designs. Typical applications include industrial sensor nodes, consumer appliance controls, battery-powered IoT devices, LED lighting controllers, low-cost motor control loops, and educational development platforms. The combination of CIPs and PPS enables designers to reduce BOM cost by eliminating external logic ICs. When designing with the PIC16F15245-I/P, ensure that unused I/O pins are configured as outputs or tied to defined logic levels to minimize supply current. The PPS feature requires careful pin assignment review during code development; MPLAB X IDE with MCC provides graphical configuration to streamline this process. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F152xx family, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC16F15245-I/REB - 8-Bit MCU, 14KB Flash, 20-VQFN | Microchip
PIC16F15245-I/REB

PIC16F15245-I/REB - 8-Bit MCU, 14KB Flash, 20-VQFN | Microchip

The Microchip PIC16F15245-I/REB is an 8-bit PIC16 microcontroller from the PIC16F152xx family featuring 14KB (8K x 14) of self-read/write Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator core. Housed in a compact 20-pin VQFN (3x3 mm) package, this device targets cost-sensitive sensor and real-time control applications. The 32 MHz CPU delivers up to 8 MIPS instruction throughput using Microchip's 49-instruction enhanced mid-range core with 16 stack levels. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and I/O pins. Within the broader taxonomy, an 8-bit MCU sits between fixed-function logic ICs and 32-bit application processors, occupying the cost-sensitive sweet spot for embedded designs. The PIC16F15245 belongs to the PIC16F mid-range MCU family, sitting between the PIC10/12/14 baseline families and the PIC18/dsPIC enhanced families. Microcontrollers enable Core Independent Peripherals (CIPs) that operate without CPU intervention, freeing the core for application logic. Key differentiating features include Core Independent Peripherals (CIPs), Intelligent Analog with a 10-bit ADC, two PWM modules, two CCP (Capture/Compare/PWM) channels, Peripheral Pin Select (PPS) for flexible pin mapping, and an EUSART plus MSSP supporting SPI and I2C communication. The XLP (eXtreme Low-Power) SLEEP mode enables battery-friendly operation down to nanoamp currents. The 20-VQFN (3x3) package achieves a footprint under 9 mm², ideal for space-constrained PCB layouts where SOIC-20 would be too large. The architecture combines the 14-bit instruction word enhanced mid-range core with hardware multiplier, deterministic interrupt latency, and dual-operation Flash with self read/write capability for in-application firmware updates. Internal voltage reference support and a configurable oscillator block reduce external component count. Typical applications include IoT sensor nodes, low-power battery-powered instrumentation, home appliance control, LED lighting controllers, automotive body electronics sub-modules, and industrial sensor interfaces. The combination of PPS, eXtreme Low-Power modes, and the small VQFN footprint makes the part especially well-suited for wearable and remote-sensor designs. When designing with this device, allocate adequate Flash for bootloaders if OTA updates are planned - the 14KB Flash includes self-read/write but boot block size should be confirmed against the latest datasheet revision. PPS configuration must be locked before peripheral use; an unlocked PPS module returns peripherals to default pins. This page synthesizes Microchip distributor pricing, drop-in same-package alternatives drawn from the same PIC16F152xx family, and practical design notes not collated in the standalone datasheet, providing engineers a single comparison surface for sourcing decisions.

見積もり お問い合わせ
PIC16F15245-I/SO - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F15245-I/SO

PIC16F15245-I/SO - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15245-I/SO is an 8-bit RISC PIC microcontroller featuring a 32MHz PIC16 CPU core with 14KB (8K x 14) of FLASH program memory and 1024 bytes of data RAM, housed in a 20-pin SOIC package. It operates from a 2.5V to 5.5V supply, integrates a 10-bit ADC, two PWM modules, two CCP modules, and standard serial interfaces (EUSART, SPI, I2C). The device belongs to the PIC16F152xx family, which is engineered around Core Independent Peripherals (CIPs), Intelligent Analog, and eXtreme Low-Power (XLP) Sleep mode. An 8-bit PIC microcontroller is a class of low-power embedded processor built on Microchip's RISC (Reduced Instruction Set Computer) architecture. PIC16F devices sit in the hierarchy: microcontroller (MCU) -> embedded processor -> 8-bit MCU -> PIC16 mid-range family -> PIC16F1xxx family -> PIC16F152xx sub-family. The 'F' indicates FLASH program memory, allowing in-circuit reprogramming; the '152' series designation maps to a specific peripheral mix designed for sensor and real-time control. Key features include 32MHz internal oscillator (8MHz with 4x PLL), 14KB self-programmable FLASH with 1KB SRAM, 10-bit ADC with up to 11 channels, two 10-bit PWM outputs, two Capture/Compare/PWM (CCP) modules, Peripheral Pin Select (PPS) for flexible I/O mapping, hardware limit timer (HLT), windowed watchdog timer, and ultra-low-power Sleep mode drawing typical currents under 1 uA. Industrial temperature range is -40C to +85C. The PIC16F15245 uses a Harvard-architecture RISC core with a 14-bit instruction word, allowing single-cycle execution of most instructions. Core Independent Peripherals like the Configurable Logic Cell (CLC) and Complementary Waveform Generator (CWG) operate without CPU intervention, freeing the core for application-level tasks. Typical applications include low-cost sensor nodes, household appliances, LED lighting controllers, battery-powered IoT devices, and motor control subsystems. Industrial uses include HMI panels, HVAC controllers, and remote sensor interfaces. When designing with this MCU, leverage Peripheral Pin Select (PPS) to remap digital peripherals to alternative I/O pins, simplifying PCB layout. Use the XLP Sleep mode for battery applications - configure the device to wake on interrupt rather than polling. This page synthesizes Microchip datasheet excerpts, distributor pricing, drop-in same-package alternatives, and practical design notes not present in a single manufacturer document.

見積もり お問い合わせ
PIC16F15245T-I/REB - 8-bit MCU, 32MHz, 14KB Flash, 20-VQFN | Microchip
PIC16F15245T-I/REB

PIC16F15245T-I/REB - 8-bit MCU, 32MHz, 14KB Flash, 20-VQFN | Microchip

The Microchip Technology PIC16F15245T-I/REB is an 8-bit PIC16 microcontroller running up to 32MHz with 14KB (8K x 14) Flash program memory and 1KB RAM, housed in a 20-pin VQFN (3x3 mm) package. It integrates a 10-bit ADC, two PWM modules, two CCP modules, hardware limit timer (HLT), watchdog timer, Peripheral Pin Select (PPS), EUSART, I2C, SPI, and the eXtreme Low-Power (XLP) Sleep mode. A PIC microcontroller is a Harvard-architecture 8-bit RISC device whose on-chip Flash stores both program code and non-volatile data, while a separate RAM bus serves working variables. The PIC16F152xx family sits between PIC16 baseline parts and PIC18 enhanced cores, adding Core Independent Peripherals (CIPs) and Intelligent Analog blocks that offload work from the CPU. This positioning makes the PIC16F15245 cost-effective for sensor nodes, motor control loops, and real-time control where deterministic behavior and low sleep current matter more than raw MIPS. Key features include 18 general-purpose I/O lines, multiple clock sources including 32MHz internal oscillator, hardware limit timer for offloaded sequencing, and PPS for flexible signal routing. The 10-bit ADC supports up to nine channels, enabling direct sensor interface without external signal conditioning. The XLP Sleep mode drops the device into nanoamp-level current draw, making it suitable for battery-powered products that spend most of their life idle. Typical applications span sensor interface modules, home appliances, LED lighting controllers, low-end motor control, IoT edge nodes, and battery-powered instrumentation. The combination of CIPs and small footprint helps designers replace discrete timing/sequencing logic with a single programmable device while keeping BOM cost low. Designers should pay attention to the ICD (in-circuit debug) pin assignments when laying out the 3x3 mm VQFN footprint, and ensure the exposed pad is properly soldered for thermal dissipation. Decoupling should follow Microchip's typical application circuit with a 100nF cap close to VDD. This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC16F152xx family, and practical design notes that complement the manufacturer datasheet for engineers selecting the PIC16F15245T-I/REB for cost-sensitive embedded designs.

見積もり お問い合わせ
PIC16F15245T-I/SO - 8-Bit MCU, 32MHz, 14KB Flash | Microchip
PIC16F15245T-I/SO

PIC16F15245T-I/SO - 8-Bit MCU, 32MHz, 14KB Flash | Microchip

The Microchip Technology PIC16F15245T-I/SO is an 8-bit RISC microcontroller from the PIC16F152xx family, featuring a 32MHz CPU core, 14KB (8K x 14 words) of Flash program memory and 1KB of RAM, housed in a 20-pin SOIC package rated for the -40C to +85C industrial temperature range. Key features include a 10-bit Analog-to-Digital Converter (ADC), two PWM modules, two Capture/Compare/PWM (CCP) peripherals, a Hardware Limit Timer (HLT), Windowed Watchdog Timer (WDT), Peripheral Pin Select (PPS), an EUSART, SPI and I2C interfaces, and Microchip's eXtreme Low-Power (XLP) Sleep mode. The wide 1.8V to 5.5V operating voltage range combined with XLP makes the part well suited for battery-powered sensor nodes. The PIC16F15245T-I/SO is built around Microchip's enhanced mid-range 8-bit core, which executes most instructions in a single clock cycle. Core Independent Peripherals (CIPs) such as the CWG (Complementary Waveform Generator), NCO (Numerically Controlled Oscillator) and HLT offload timing-critical tasks from the CPU, allowing deterministic behavior without software overhead. The integrated 32MHz internal oscillator eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area. Typical applications include IoT sensor nodes, low-cost motor control, LED lighting controllers, household appliances, and general-purpose embedded control. The combination of PPS (which remaps digital peripherals to almost any I/O pin) and XLP sleep currents makes the part especially attractive for battery-powered wireless sensor end-points. When designing with the PIC16F15245T-I/SO, ensure that the ICSP programming pins (PGD/PGC) remain accessible for in-circuit programming and debugging. For applications requiring ADC accuracy better than the 10-bit native resolution, enable the integrated acquisition delay and average multiple conversions to reduce noise-induced error.

見積もり お問い合わせ
PIC16F15245T-I/SS - 32MHz 8-bit MCU, 14KB Flash, 20-SSOP | Microchip
PIC16F15245T-I/SS

PIC16F15245T-I/SS - 32MHz 8-bit MCU, 14KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16F15245T-I/SS is an 8-bit PIC microcontroller built on a RISC architecture with a 32MHz core, 14KB (8K x 14) of Flash program memory, and 1KB of SRAM, housed in a 20-pin SSOP package. It operates from a 2.5V to 5.5V supply and is part of the PIC16F152xx family that emphasizes Core Independent Peripherals (CIPs), Intelligent Analog, and eXtreme Low-Power (XLP) operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, SRAM for data, EEPROM for non-volatile storage), and programmable peripherals. The 8-bit PIC16 family is positioned as a cost-effective platform for sensor interfacing, real-time control, and low-power IoT endpoints, sitting below 16-bit and 32-bit MCUs in computational capability but offering the lowest active and sleep current per feature in Microchip's portfolio. Key features of the PIC16F15245T-I/SS include a 10-bit Analog-to-Digital Converter (ADC), two PWM outputs, two Capture/Compare/PWM (CCP) modules, a Hardware Limit Timer (HLT), Watchdog Timer (WDT), Peripheral Pin Select (PPS) for flexible signal routing, plus EUSART, SPI, and I2C communication peripherals. The device also supports the XLP SLEEP mode for nanoWatt sleep currents. Architecturally, the PIC16F15245 uses an enhanced mid-range 8-bit core with hardware multiply assist and a 14-bit instruction word, paired with Core Independent Peripherals (CIPs) that operate without CPU intervention. The CIP approach reduces firmware complexity and enables deterministic real-time response, which is critical in cost-sensitive sensor and control applications. Typical applications include consumer appliances, IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, and small motor control. The wide 2.5V-5.5V supply range and low-power sleep modes make it especially well suited to energy-harvesting and battery-backed designs. The 20-SSOP package also allows compact board layouts with sufficient I/O for typical sensor plus communication interfaces. When designing with this MCU, ensure the configuration bits are properly set for brown-out reset, watchdog enable, and low-voltage programming. The PPS feature allows remapping of digital peripherals to most I/O pins, simplifying PCB layout when routing EUSART, SPI, or PWM signals.

見積もり お問い合わせ
PIC16F15254-I/SS - 8-bit MCU, 7KB Flash, 32MHz | Microchip
PIC16F15254-I/SS

PIC16F15254-I/SS - 8-bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15254-I/SS is an 8-bit RISC microcontroller based on the enhanced mid-range PIC16 CPU core, featuring 7KB (7K x 14) of Flash program memory, 512 bytes of SRAM, and a maximum CPU clock speed of 32MHz. Housed in a 28-pin SSOP package, the device is part of the PIC16F152xx family and includes a 10-bit ADC, two PWM modules, two CCP modules, hardware limit timer (HLT), watchdog timer (WDT), peripheral pin select (PPS), EUSART, SPI, and I2C peripherals. According to the Microchip product page, the family is engineered for eXtreme Low-Power (XLP) operation, making the PIC16F15254-I/SS well-suited for battery-powered and energy-harvesting designs. An 8-bit PIC microcontroller is a Harvard-architecture RISC processor that executes one instruction per clock cycle (except branches), optimized for deterministic real-time control. PIC MCUs sit in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and the PIC16 mid-range family specifically targets cost-sensitive general-purpose applications where low power, small footprint, and rich Core Independent Peripherals (CIPs) are valued over raw throughput. Key features of the PIC16F15254-I/SS include 7KB self-programmable Flash, 256 bytes of EEPROM, a 10-bit Analog-to-Digital Converter with computation, two 10-bit PWM outputs, two Capture/Compare/PWM (CCP) peripherals, Peripheral Pin Select (PPS) for flexible signal routing, and Core Independent Peripherals that offload tasks from the CPU. The eXtreme Low-Power (XLP) technology delivers sleep currents in the nanoamp range, and the wide operating voltage range of 1.8V to 5.5V supports both 3.3V and 5V systems. The PIC16F15254-I/SS uses an enhanced mid-range 14-bit instruction set with a 16-level hardware stack and a single-cycle hardware multiplier. The integrated oscillator, voltage reference, and brown-out reset (BOR) reduce external component count, while PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB layout. Internal temperature-indicator and rail-to-rail analog comparators extend its usability in sensor-interface designs. Typical applications include IoT sensor nodes, home appliances, LED lighting controllers, battery-powered consumer devices, industrial control and monitoring, and low-cost PIC-based motor-control loops. The combination of small Flash size, rich peripherals, and XLP makes it a strong fit for designs migrating from older PIC12F/PIC16F parts while adding modern features. When designing with this MCU, pay attention to the minimum operating voltage for the chosen clock configuration - the internal 32MHz HFINTOSC requires at least 3.0V on VDD, while the 16MHz variant can operate down to 1.8V. Use Microchip's MPLAB X IDE and XC8 compiler for development, and validate power budgets against the datasheet's DC and AC characteristics tables for your specific peripheral mix. This page synthesizes distributor pricing, drop-in alternatives within the PIC16F152xx family, and practical design notes not found in the manufacturer datasheet alone, helping engineers and buyers make informed selection and sourcing decisions.

見積もり お問い合わせ
PIC16F15254-I/STX - 8-Bit MCU, 32MHz, 7KB Flash, 28-VQFN | Microchip
PIC16F15254-I/STX

PIC16F15254-I/STX - 8-Bit MCU, 32MHz, 7KB Flash, 28-VQFN | Microchip

The Microchip Technology PIC16F15254-I/STX is an 8-bit PIC microcontroller built around the PIC16F152xx family core, delivering 32 MHz CPU performance with 7 KB of Flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM, all integrated in a compact 28-pin VQFN (4x4 mm) package. The device family combines essential digital peripherals, Intelligent Analog (10-bit ADC), standard communication modules (EUSART, SPI, I2C), and Microchip Core Independent Peripherals (CIPs) to enable cost-sensitive sensor and real-time control designs. According to the Microchip product page, the part targets applications that demand eXtreme Low-Power (XLP) operation, supporting battery-powered and energy-harvesting end nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a mix of analog and digital peripherals. The 8-bit PIC16F family belongs to the broader PIC architecture hierarchy (PIC -> PIC10/12/14/16/18/24/32 -> 8/16/32-bit PIC MCUs -> Microcontroller -> Semiconductor). XLP MCUs add deep-sleep current budgets in the nA-to-uA range, allowing years of operation from a single coin cell when duty-cycled. Within Microchip's catalog, the PIC16F152xx sits between the smaller PIC16F15xx and the larger PIC16F18xx families. Key features include 7 KB self-programmable Flash, 512 B SRAM, 256 B EEPROM, a 10-bit ADC with internal voltage reference, two PWM modules, two CCP modules, an on-chip temperature indicator, a windowed watchdog timer, Peripheral Pin Select (PPS) for flexible pin mapping, and a hardware Limit Timer (HLT). Communication is served by one EUSART (RS-232/RS-485 capable) and one MSSP that handles both SPI and I2C master/slave modes. The 28-VQFN package exposes up to 25 I/O pins. Architecturally the device uses a Harvard RISC-style core with a single-cycle 32 MHz instruction cycle, hardware multiplier, and interrupt controller with context save. Microchip's CIPs (CLC, NCO, CWG, DSM) operate independently of the CPU, freeing MIPS for the application and reducing firmware complexity. The PPS module lets designers remap digital peripherals onto most I/O pins post-firmware, simplifying PCB layout. Typical applications include low-cost sensor nodes, IoT HVAC controls, white goods user interfaces, LED lighting controllers, battery-powered medical accessories, and small industrial automation tiles. The wide operating range (1.8 V to 5.5 V) and XLP sleep currents make it well suited to multi-year battery deployments where the MCU spends most of its time in sleep and wakes briefly to take a measurement. When designing with this MCU, plan for an external decoupling capacitor network (100 nF plus 1-10 uF bulk), keep analog traces short and guarded for ADC accuracy, and budget for in-circuit serial programming (ICSP) pins on the PCB to retain prototype flexibility. PPS assignments should be finalized before PCB layout because unused pins cannot be reassigned after assembly. This page synthesizes Microchip datasheet parameters, distributor stock and pricing, pin-compatible alternatives from the same PIC16F152xx family, and practical design notes not all collected on any single manufacturer page.

見積もり お問い合わせ
PIC16F15255-I/SP - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F15255-I/SP

PIC16F15255-I/SP - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip PIC16F15255-I/SP is an 8-bit PIC microcontroller featuring 14KB Flash program memory, 1KB RAM, a 32MHz CPU core, and a 10-bit ADC, packaged in a 28-pin SPDIP (SP) through-hole format. According to the Microchip product page, the PIC16F152xx family pairs Core Independent Peripherals (CIPs) with Intelligent Analog and standard communication modules (EUSART, SPI, I2C) for cost-sensitive sensor and real-time control tasks. It supports eXtreme Low-Power (XLP) operation and includes 2x PWM, 2x CCP, hardware limit timer (HLT), watchdog timer, and Peripheral Pin Select (PPS). An 8-bit microcontroller is a single-chip computer that integrates a CPU, RAM, program memory, and I/O peripherals on one silicon die, using an internal data bus 8 bits wide. PIC microcontrollers sit within the larger hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. They are widely used in white goods, sensor nodes, and battery-powered devices where deterministic behavior, low cost, and low power matter more than raw compute throughput. Key features include 14KB (14K x 8) Flash self-programmable memory, 1KB SRAM, 10-bit Analog-to-Digital Converter with multiple channels, two PWM modules, two CCP (Capture/Compare/PWM) blocks, hardware limit timer, EUSART, SPI and I2C communication, peripheral pin select (PPS) for flexible routing, and a watchdog timer. The XLP sleep modes reduce quiescent current to support long battery life in IoT endpoints. The PIC16F15255 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and 32MHz internal oscillator, delivering up to 8 MIPS of throughput. PPS allows digital peripheral I/O to be remapped to multiple pins, simplifying PCB layout. Integrated Intelligent Analog blocks reduce external component count by handling filtering and threshold detection in hardware, freeing the core for application logic. Typical applications include home appliances, environmental sensor nodes, low-power IoT endpoints, LED lighting controllers, battery chargers, and small motor control boards. The PIC16F15255-I/SP suits designs needing through-hole assembly for prototyping, hand-soldered units, or industrial environments where leaded packages survive mechanical stress better than QFN. When designing with this part, allocate the PPS map early so each peripheral signal lands on a routable pin, and verify the 10-bit ADC input channel count against your sensor matrix. The 28-pin SPDIP leaves generous board space but consumes more PCB area than SSOP or SOIC equivalents - plan footprint accordingly if migrating to SMT later. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right MCU for cost-sensitive embedded designs.

見積もり お問い合わせ
PIC16F15255-I/SS - 32MHz 8-bit MCU, 14KB Flash 28-SSOP | Microchip
PIC16F15255-I/SS

PIC16F15255-I/SS - 32MHz 8-bit MCU, 14KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16F15255-I/SS is an 8-bit PIC microcontroller running at up to 32 MHz, with 14 KB of Flash program memory and packaged in a 28-pin SSOP. It belongs to the PIC16F152xx family that pairs Core Independent Peripherals (CIPs), intelligent analog peripherals, and standard communication peripherals with eXtreme Low-Power (XLP) capability for cost-sensitive sensor and real-time control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a mix of digital and analog peripherals. The PIC16F15255 specifically sits in the 8-bit PIC16 family, which in the broader taxonomy is a microcontroller, then an embedded processor, then a semiconductor device. Within the 8-bit space, PIC16F1 enhanced mid-range parts compete with AVR and 8051 architectures on simplicity, deterministic interrupt latency, and low active/standby current. Key features of the PIC16F15255 include 14 KB self-programmable Flash, 1024 bytes of SRAM, 256 bytes of EEPROM, an integrated 10-bit Analog-to-Digital Converter (ADC) with computation, multiple Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect (ZCD), plus standard EUSART, I2C, and SPI communication modules. The XLP technology delivers active currents in the microamp range and deep-sleep currents in the nanoamp range. Architecturally, the PIC16F15255 uses an enhanced mid-range 8-bit RISC core with a hardware stack, fixed-latency interrupt response, and a 32 MHz internal oscillator (with PLL option). The CIP blocks let designers replace discrete glue logic with on-chip configurable hardware, shrinking BOM cost and PCB area while improving reliability. The integrated peripherals are mapped through the Peripheral Pin Select (PPS) system, giving flexible signal routing on the 28-pin SSOP. Typical applications include low-power wireless sensor nodes, IoT end devices, home automation and building-control sensor hubs, battery-powered consumer appliances, automotive body and lighting accessories (in non-safety roles), industrial sensor transmitters, and small motor-control loops using the CWG plus NCO blocks. The combination of intelligent analog and CIPs also makes it well suited to LED driving and capacitive touch user interfaces. When designing with this part, plan the clock source carefully. The 32 MHz internal oscillator eliminates an external crystal in most designs, but precision timing applications still benefit from an external crystal or the high-frequency internal oscillator tuning. Use the PPS system to remap peripherals and avoid pin-conflict problems during PCB layout. Always include proper decoupling and follow the brown-out and watchdog configuration guidance from the device datasheet. This page synthesizes distributor pricing, same-package drop-in alternatives, comparison data, and practical design notes that are not collated in the manufacturer datasheet itself.

見積もり お問い合わせ
PIC16F15255T-I/STX - 8-bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F15255T-I/STX

PIC16F15255T-I/STX - 8-bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15255T-I/STX is an 8-bit PIC microcontroller featuring 14KB of Flash program memory, 1KB of SRAM, and a 32MHz CPU core, housed in a 28-pin VQFN (4x4 mm) surface-mount package. The device integrates Core Independent Peripherals (CIPs) including a 10-bit ADC, two PWM modules, two CCP modules, and supports the EUSART, SPI, and I2C communication interfaces. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, plus integrated peripherals such as ADC, timers, and communication interfaces. PIC microcontrollers from Microchip Technology are widely deployed in cost-sensitive sensor and real-time control applications due to their deterministic architecture and the proprietary PIC16 instruction set. The PIC16F15255 family belongs to the XLP (eXtreme Low Power) portfolio, designed for battery-powered and energy-harvesting designs. Key features include 14KB self-programmable Flash with 256-byte EEPROM emulation, a 10-bit ADC with computation (ADC2), two 10-bit PWM outputs, and two Capture/Compare/PWM (CCP) modules that can operate while the CPU sleeps. Peripherals are interconnected via the Peripheral Pin Select (PPS) subsystem, allowing remapping of digital functions to any I/O pin. The device also offers a Windowed Watchdog Timer (WWDT), an EUSART, one SPI, and one I2C interface, enabling flexible sensor node and human-machine interface designs. The PIC16F15255 architecture uses a 14-bit instruction word and a modified Harvard bus structure, allowing instruction fetches and data accesses to occur in parallel. Intelligent Analog features such as zero-cross detection and slope compensation simplify closed-loop power-supply and motor-control firmware. The 32MHz internal oscillator eliminates the need for an external crystal in most designs, while PPS gives board-routing flexibility that is uncommon in 8-bit parts. Typical applications include industrial sensor nodes, home-automation controllers, IoT edge devices, low-cost motor-control boards, LED lighting drivers, and battery-powered consumer electronics. The XLP nanoWatt technology suits designs targeting standby currents below 1 uA, including remote controls, smart locks, and wearables. When designing with this part, place decoupling capacitors (100 nF ceramic plus 1 uF bulk) close to the VDD pins and ensure the ICSPDAT/ICSPCLK pins are reserved for in-circuit serial programming. Use the PPS feature to map peripheral signals to any I/O pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ