マイクロコントローラ

製品 (20,000+)

PIC16F15376T-I/PTVAO - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F15376T-I/PTVAO

PIC16F15376T-I/PTVAO - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15376T-I/PTVAO is an 8-bit PIC16 microcontroller from the PIC16(L)F153XX family, operating at up to 32 MHz with 28 KB of Flash program memory and 2 KB of RAM, housed in a 44-pin TQFP package (10x10 mm). The part suffix T-I/PTVAO designates tape-and-reel packaging, industrial temperature range (-40C to +85C), the 44-pin TQFP package, and the automotive (VAO) ordering code suffix. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of on-chip peripherals such as timers, ADC, comparators, PWM, and communication interfaces. PIC microcontrollers sit within the broader 8-bit MCU category alongside 8051 and AVR families, and they are used as the central processing element in countless embedded systems. They typically fall under the system hierarchy: microcontroller -> embedded processor -> semiconductor device. Key features of this part include 4 independent PWM modules with complementary outputs, up to 38 digital I/O pins, a 10-bit ADC, multiple Core Independent Peripherals (CIPs) such as CWG, NCO, and configurable logic cells, plus an integrated temperature indicator. The XLP (eXtreme Low Power) technology keeps active current low and supports deep-sleep currents in the nanoampere range, making the device well suited to battery-powered and energy-harvesting applications. The architecture uses a 14-bit instruction word with a hardware stack, which is a hallmark of the PIC16 mid-range family. The CIPs allow complex timing, motor, and signal-conditioning tasks to run without CPU intervention, freeing the core for application logic and improving deterministic real-time response. Typical applications include IoT sensor nodes, automotive body and interior modules, white-goods and appliance control, low-power remote controls, lighting controls, and small motor/PMW-driven loads such as fans and pumps. The integrated comparators and op-amp options also support analog signal conditioning in sensor-interface designs. When designing with this part, ensure that the 44-pin TQFP footprint is suitable for the target PCB and that the debugger/ programmer selection (such as PICkit 4 or MPLAB ICD 4) is configured for the PIC16F153XX device ID. The automotive VAO suffix does not by itself indicate AEC-Q100 qualification status; that must be verified separately.

見積もり お問い合わせ
PIC16F15385-E/MV - 8-bit MCU, 14KB Flash, 32MHz, 48-UQFN | Microchip
PIC16F15385-E/MV

PIC16F15385-E/MV - 8-bit MCU, 14KB Flash, 32MHz, 48-UQFN | Microchip

The Microchip Technology PIC16F15385-E/MV is an 8-bit PIC microcontroller from the PIC16(L)F153xx family featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator in a 48-pin UQFN (MV) 6x6mm package with exposed thermal pad. Operating from 2.3V to 5.5V, the -E temperature grade extends from -40°C to +125°C for industrial and harsh-environment deployments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one silicon die. The PIC16F15385 sits in the hierarchy: 8-bit MCU -> PIC16 family -> PIC16F153xx sub-family -> Microchip XLP low-power platform, combining a RISC core with Core Independent Peripherals (CIPs) such as CLC, CWG, and NCO that execute complex sequencing without CPU intervention. Key features include four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), four 10-bit PWMs, a 10-bit ADC with Computation (ADC2), a 5-bit/8-bit DAC, two comparators, two EUSART, SPI/I2C, and eXtreme Low-Power (XLP) sleep modes drawing as little as 30 nA. Intelligent Analog peripherals enable sensor interfacing without external components. The device uses a 14-bit instruction word RISC architecture optimized for deterministic interrupt response, allowing event-driven designs that offload timing-critical tasks to peripherals via Peripheral Pin Select (PPS). The 32MHz internal oscillator (±1% calibrated) eliminates an external crystal in cost-sensitive designs. Typical applications include IoT sensor nodes, home automation controllers, battery-powered remote controls, low-power wireless sensor hubs, BLDC/PMSM motor commutation logic, and industrial sensor signal conditioning. The wide 2.3V-5.5V range and XLP sleep modes make it especially suited for coin-cell and energy-harvesting products. When designing with this part, place a 0.1 µF decoupling capacitor within 3 mm of every VDD pin and tie all unused I/O to defined logic levels to minimize current leakage. Verify PPS mappings for your chosen peripherals in the MPLAB Code Configurator before committing the pinout. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F153xx family, and practical design notes not collected in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F15385-I/PT - 8-Bit 32MHz 14KB Flash MCU 48-TQFP | Microchip
PIC16F15385-I/PT

PIC16F15385-I/PT - 8-Bit 32MHz 14KB Flash MCU 48-TQFP | Microchip

The Microchip Technology PIC16F15385-I/PT is an 8-bit PIC microcontroller featuring a 32MHz CPU, 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and Core Independent Peripherals (CIPs), housed in a 48-pin TQFP (7x7) package. The device operates from 2.3V to 5.5V and is part of the PIC16(L)F153xx family with eXtreme Low-Power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (typically Flash), volatile working memory (RAM), and a configurable set of digital and analog peripherals. PIC16F family MCUs are RISC-based 8-bit microcontrollers from Microchip widely deployed in low-power and cost-sensitive embedded designs; they sit at the small-form-factor end of the broader microcontroller hierarchy (MCU -> embedded controller -> semiconductor IC). Key features include 4 PWMs, an on-chip comparator, a 5-bit/8-bit/10-bit DAC, an ADC with Computation, a Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART, and SPI/I2C communication. The XLP technology enables sleep currents down to nanoampere levels, making the device well-suited for battery-powered applications such as remote sensors and IoT endpoints. The PIC16F15385 uses an enhanced mid-range 8-bit RISC core with a 14-bit instruction word, providing deterministic instruction timing suitable for real-time control. The integrated CIPs (CLC, CWG, NCO, DSM) implement logic, waveform generation, and signal conditioning entirely in hardware, offloading tasks from the CPU and reducing firmware complexity and power consumption. Typical applications include low-power IoT sensor nodes, consumer electronics control, battery-operated remote controls, LED lighting drivers, small motor control loops, and general-purpose embedded systems requiring multiple serial interfaces and PWM channels. The wide operating voltage and XLP modes also suit energy-harvesting designs. When designing with this part, ensure decoupling follows Microchip's guidelines (typically a 100nF ceramic plus a bulk capacitor near VDD) and verify I/O voltage levels match peripheral expectations. Programming is supported via MPLAB X IDE and the PICkit/SNAP debuggers. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for selecting the PIC16F15385-I/PT.

見積もり お問い合わせ
PIC16F15385T-I/MV - 8-bit MCU, 14KB Flash, 48-UQFN | Microchip
PIC16F15385T-I/MV

PIC16F15385T-I/MV - 8-bit MCU, 14KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC16F15385T-I/MV is an 8-bit PIC microcontroller from the PIC16F153XX family, integrating 14KB (8K x 14) of Flash program memory, 1KB of RAM, and 32MHz CPU performance in a 48-pin UQFN (6x6x0.5mm) tape-and-reel package. It belongs to Microchip's eXtreme Low-Power (XLP) family and supports 2.3V to 5.5V operation with up to 44 I/O pins. The 'T' suffix indicates Tape & Reel packaging, 'I' denotes the industrial -40C to +85C temperature range, and '/MV' identifies the UQFN-48 package. An 8-bit PIC microcontroller is a RISC-based embedded processor that combines a CPU, RAM, Flash, and configurable peripherals on a single die. PIC MCUs sit within the broader microcontrollers (MCU) category, which itself belongs to the embedded IC / semiconductor hierarchy. They are designed for deterministic, low-power, low-cost control tasks. The PIC16F15385T-I/MV specifically belongs to the full-featured 28/40/44/48-pin sub-tier of the PIC16F153XX family, distinguished by the highest peripheral density in the series. Key features include 4 PWM modules, a 5-bit DAC, comparators, a Configurable Logic Cell (CLC) block (4 instances), a Complementary Waveform Generator (CWG), 2 EUSART, SPI, and I2C communication peripherals, plus Core Independent Peripherals (CIPs) that offload tasks from the CPU. The integrated 10-bit ADC with Intelligent Analog capability eliminates many external analog components, while the XLP nanoWatt technology enables battery-powered applications with sleep currents measured in nanoamperes. Architecturally, the device uses a 14-bit instruction word with a modified Harvard architecture, providing predictable instruction timing and tight C code generation through Microchip's XC8 compiler. The 32MHz internal oscillator and the form-factor-matched pinout (48-UQFN with exposed pad for thermal dissipation) make it suitable for compact industrial designs. Typical applications include IoT sensor nodes, industrial control interfaces, low-power wireless sensor hubs, consumer appliance control boards, LED lighting controllers, and battery-powered instrumentation. The combination of CIPs and XLP enables designs where the CPU sleeps most of the time and peripherals autonomously service interrupts. Designers should note that the 48-UQFN package requires careful PCB layout with a thermal pad connected to ground for proper heat dissipation, and the exposed pad must be soldered for mechanical reliability. Use MPLAB X IDE with the XC8 compiler for development, and choose PIC16F15386 for higher pin count or PIC16F15376 for cost-down variants in the same family.

見積もり お問い合わせ
PIC16F15385T-I/PT - 8-Bit 32MHz MCU, 14KB Flash, 48-TQFP | Microchip
PIC16F15385T-I/PT

PIC16F15385T-I/PT - 8-Bit 32MHz MCU, 14KB Flash, 48-TQFP | Microchip

The Microchip Technology PIC16F15385T-I/PT is a member of the PIC16(L)F153xx 8-bit microcontroller family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator core housed in a 48-pin TQFP package with 7x7 mm body. The device operates across a wide 2.3V to 5.5V supply range and integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for battery-friendly designs. An 8-bit MCU (microcontroller) is a single-chip computer that combines a CPU, memory, and programmable I/O on one die; the PIC16 family uses a Harvard RISC architecture with separate program and data buses, executing one instruction per clock cycle to deliver deterministic real-time performance. The PIC16F15385 sits in the hierarchy: 8-bit PIC MCU -> enhanced mid-range core -> PIC16F153xx family -> Microchip's broad PIC portfolio. It supports both 5V and 3.3V system rails and includes nanoWatt XLP sleep modes with currents in the microamp range, making it attractive for mains- or battery-powered sensor nodes. Key features include four 10-bit PWMs with complementary waveform generation, a 5-bit DAC, a comparator, a 10-bit ADC with automatic channel scanning, a Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC) for hardware state-machine glue logic, two EUSART ports, and SPI/I2C interfaces. Up to 44 I/O pins are available, alongside an on-board voltage reference and multiple timer/counter modules. The integrated CIPs offload tasks from the core, reducing code complexity and lowering active-mode power. Architecturally the device pairs the enhanced mid-range core (49 instructions, 16-level hardware stack) with peripheral pin select (PPS), allowing most digital peripherals to be routed to any I/O. The 32 MHz Fosc supports a 125 ns instruction cycle, and the on-chip 32 MHz HFINTOSC eliminates an external crystal in many designs. XLP sleep currents below 1 uA (typical) support long-life battery installations such as wireless sensor transmitters and metering endpoints. Typical applications include IoT sensor nodes, home appliances, LED lighting controllers, low-power industrial sensor conditioning, and consumer white-goods user-interface boards. The combination of CLC, CWG, and PWM also suits motor-control signal generation, digital lighting, and Class-D audio modulation. Designers routinely choose this part when integrating signal-chain analog, comms, and deterministic timing without the cost of a 32-bit MCU. A key design consideration is the TQFP-48 land pattern: it requires standard surface-mount reflow and provides better thermal dissipation than smaller QFN variants, but the exposed-pad variant is not used here - ground/power are routed through dedicated pins. For applications needing >14KB Flash or more RAM, the PIC16F15386 in the same TQFP-48 footprint provides 28KB Flash and 2KB RAM and is a true drop-in upgrade. This page synthesizes distributor stock, parametric comparison, and pin-compatible alternatives not consolidated in the manufacturer datasheet, with all specifications traced to the Microchip PIC16F15385 datasheet and current distributor listings.

見積もり お問い合わせ
PIC16F15386-E/MV - 28KB Flash 8-bit MCU 48-UQFN | Microchip
PIC16F15386-E/MV

PIC16F15386-E/MV - 28KB Flash 8-bit MCU 48-UQFN | Microchip

The Microchip Technology PIC16F15386-E/MV is an 8-bit PIC microcontroller from the PIC16(L)F153XX family, featuring 28KB of Flash program memory, 2KB of RAM, and a maximum CPU speed of 32 MHz. It is housed in a 48-pin UQFN (6x6x0.5mm) package with an exposed pad and is designed for low-power and general-purpose embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC16F15386 belongs to the 8-bit MCU category, meaning its data path and arithmetic logic unit operate on 8-bit words. 8-bit MCUs sit below 16-bit and 32-bit microcontrollers in the embedded hierarchy but above simple discrete logic, offering a balance of cost, deterministic performance, and code density. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, enabling single-cycle instruction execution. Key features include four 10-bit PWM modules, a 5-bit DAC, comparators, a complementary waveform generator (CWG), four configurable logic cells (CLCs), two EUSARTs, and SPI/I2C communication peripherals. The device supports Core Independent Peripherals (CIPs) that operate without CPU intervention, reducing firmware complexity and power consumption. eXtreme Low-Power (XLP) technology provides sleep currents in the nanoamp range, making the part suitable for battery-powered applications. The 28KB Flash provides ample headroom for application firmware, while 2KB RAM supports data tables, command processing, and stack depth for complex state machines. The 48-UQFN (6x6mm) exposed-pad package provides strong thermal performance for the device class and supports compact PCB layouts in space-constrained designs. Typical applications include low-power IoT sensor nodes, consumer appliances, industrial control, LED lighting controllers, and battery-powered instrumentation. The combination of XLP, CIPs, and rich analog peripherals also suits the part to smart home devices, motor control loops, and human-machine interface (HMI) subsystems. When designing with the PIC16F15386, ensure the exposed pad is soldered to the PCB ground plane for proper thermal and electrical performance. A 100 nF decoupling capacitor should be placed as close as possible to the VDD pin to mitigate digital switching noise. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a complete decision profile for the PIC16F15386-E/MV.

見積もり お問い合わせ
PIC16F15386-I/PT - 8-bit 32MHz 28KB Flash XLP MCU | Microchip
PIC16F15386-I/PT

PIC16F15386-I/PT - 8-bit 32MHz 28KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F15386-I/PT is an 8-bit PIC XLP microcontroller running up to 32 MHz with 28 KB (16K x 14) Flash program memory, 2 KB SRAM and 256 bytes EEPROM, housed in a 48-pin TQFP (7x7 mm) package. It operates from 2.3 V to 5.5 V across the -40 C to +85 C industrial temperature range, exposing up to 43 general-purpose I/O pins for sensor-hub and human-machine-interface designs. What is an 8-bit PIC microcontroller? An 8-bit PIC microcontroller is a single-chip computer built around a RISC CPU with an 8-bit data path, on-chip Flash program memory, SRAM, EEPROM, and a configurable peripheral mix. The PIC16F153xx family sits within the larger PIC MCU hierarchy: PIC16 -> PIC mid-range -> 8-bit MCU -> microcontroller -> embedded semiconductor. The 'F' suffix denotes Flash program memory, and the 'XLP' badge identifies parts designed for eXtreme Low Power applications including sleep currents in the nanoamp range and active currents well under 1 mA/MHz. Key differentiating features of the PIC16F15386 include Core Independent Peripherals (CIPs) such as four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), and a Numerically Controlled Oscillator (NCO) that execute logic, waveform generation, and counting without CPU intervention. The on-chip 10-bit ADC with Computation (ADC2) automates averaging, threshold comparison, and burst accumulation, while four PWMs, two comparators, a 5-bit DAC, two EUSARTs, SPI, and I2C round out the analog and digital peripheral mix. Architecturally the part pairs the standard PIC16 enhanced mid-range core with nanoWatt XLP power-management blocks including IDLE and DOZE modes, peripheral module disable, and a windowed watchdog timer. The internal 32 MHz high-speed oscillator eliminates the need for an external crystal in many designs, and the 48-pin TQFP footprint exposes a rich set of communication and timer resources. Typical applications include low-power IoT sensor nodes, battery-powered consumer appliances, LED lighting controllers, industrial sensor interfaces, remote controls, wearables, and small segment LCD subsystems. The combination of CIPs and XLP also suits it for energy-harvesting endpoints where the CPU can remain in sleep while peripherals operate. When designing with this MCU, place the ICSPDAT/ICSPCLK traces away from switching lines and provide a 100 nF decoupling capacitor close to each VDD pin plus a bulk 1-10 uF capacitor on the main rail. For deterministic motor or LED timing, configure the CWG and a 10-bit PWM in hardware so the CPU can stay in sleep, extending battery life by 10-100x compared with firmware-timed alternatives. This page synthesizes distributor pricing, same-family and drop-in cross-brand alternatives, and practical design notes that are not collected in any single manufacturer or distributor resource, giving engineers a faster path from part selection to qualified PCB layout.

見積もり お問い合わせ
PIC16F15386T-I/MV - 32MHz 8-bit MCU, 28KB Flash 48-UQFN | Microchip
PIC16F15386T-I/MV

PIC16F15386T-I/MV - 32MHz 8-bit MCU, 28KB Flash 48-UQFN | Microchip

The Microchip Technology PIC16F15386T-I/MV is an 8-bit PIC16 microcontroller from the PIC16F153xx XLP family, offering 28KB (16K x 14 words) of Flash program memory, 2KB SRAM, and a 32MHz internal oscillator core, housed in a 48-pin UQFN (6x6 mm) package with exposed thermal pad. The device integrates intelligent analog peripherals including a 10-bit ADC, a 5-bit DAC, comparators, and Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and four PWM channels, alongside dual EUSART, SPI, and I2C communication interfaces. An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data bus that integrates CPU, RAM, non-volatile program memory, and peripheral interfaces in one package. Within the broader taxonomy, PIC16F parts belong to the PIC microcontroller family -> 8-bit MCU -> embedded controller -> semiconductor IC, and they are designed for low-power and cost-sensitive embedded applications. The PIC16F15386T-I/MV uses a RISC architecture with a 14-bit instruction word and 32MHz maximum clock speed, balancing deterministic interrupt response with low active and sleep current consumption for XLP battery-powered designs. Key features include XLP technology for sub-microamp sleep currents, 4 Configurable Logic Cells (CLC) for hardware state-machine replacement, a Complementary Waveform Generator (CWG) for half-bridge and full-bridge drive, two EUSART modules supporting RS-232/RS-485 LIN, 28KB self-programmable Flash with device information area (DIA) and unique device ID, and 2KB SRAM. The 48-UQFN (6x6) package reduces board footprint while the exposed pad provides a low theta-JA thermal path for sustained industrial temperature operation from -40C to +85C. The architecture pairs a mid-range PIC16 core with the Peripheral Pin Select (PPS) crossbar, which lets digital peripherals be remapped to almost any I/O pin, simplifying PCB layout and BOM optimization. The CIPs let timing-critical functions run without CPU intervention, freeing the core to stay in low-power sleep states and directly improving battery life in IoT and sensor-node designs. Typical applications include IoT sensor nodes, battery-powered home automation, industrial control and HMI panels, LED lighting controllers with CWG-driven dimming, and automotive body-control accessories. The combination of 28KB Flash and 2KB RAM suits mid-complexity state machines and protocol bridges where low sleep current is essential. When designing with the PIC16F15386T-I/MV, allocate adequate GND vias under the exposed thermal pad to meet the datasheet thermal resistance specification and to provide a stable reference for the ADC. Place the 0.1uF VDD decoupling capacitor within 1-2 mm of each power pin to suppress switch-mode noise from the CWG or PWM outputs. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found on the manufacturer datasheet cover page, giving procurement and embedded engineers a single decision-ready reference.

見積もり お問い合わせ
PIC16F1574-E/JQ - 8-Bit MCU, 32MHz, 7KB Flash, 16-UQFN | Microchip
PIC16F1574-E/JQ

PIC16F1574-E/JQ - 8-Bit MCU, 32MHz, 7KB Flash, 16-UQFN | Microchip

The Microchip Technology PIC16F1574-E/JQ is an 8-bit RISC microcontroller (MCU) built on FLASH technology, featuring a PIC16 CPU core running at up to 32 MHz with 7 KB (4K x 14 words) of program memory and 512 bytes of RAM. It is housed in a compact 16-pin UQFN (4x4 mm) package designated "JQ" and operates across a 2.5 V to 3.6 V supply range with a -40 °C to +125 °C extended industrial temperature grade. What is an 8-bit microcontroller? An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data RAM, and a rich set of peripherals (ADC, timers, PWM, communication blocks) into one package. 8-bit MCUs from the PIC16 family occupy the low-power, deterministic end of the embedded spectrum, sitting under the umbrella hierarchy: microcontroller -> embedded processor -> semiconductor IC. They are widely used when the application needs deterministic interrupt latency, low quiescent current, and a small code footprint rather than the multi-GHz throughput of an ARM Cortex-M device. The PIC16F1574-E/JQ's distinguishing features are four 16-bit PWMs with independent timers (high-resolution PWM for LED lighting and motor control), a 10-bit ADC, two comparators, a 5-bit DAC, a single USART, and 12 I/O lines. The 16-bit PWM resolution is the headline feature - it allows precise dimming and current control that 8-bit or 10-bit PWM MCUs cannot match without external timing ICs. Architecturally, the device uses a Harvard RISC core with a 14-bit instruction word and a hardware multiplier, providing deterministic 1-cycle instruction execution (except branches). The 7 KB self-programmable Flash supports In-Circuit Serial Programming (ICSP) for field updates, and the 512 B SRAM provides headroom for protocol stacks, lighting state machines, and small control loops. Typical applications include high-resolution LED lighting drivers (RGBW or tunable white), BLDC fan and pump motor control via complementary PWM, general-purpose sensor signal conditioning, and consumer/industrial white-goods control. The automotive-grade temperature range and small UQFN footprint also fit HMI (human-machine interface) and IoT edge-node designs where board area is constrained. When designing, note that Vdd must be decoupled with 100 nF and bulk capacitors close to the ICSP/VDD pins, and unused I/O should be configured as outputs low to minimize power. The PIC16F1574-E/JQ is the extended-temperature ("-E") variant; the "-I" grade is industrial-only (0 °C to +85 °C). This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes that go beyond the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1574-E/P - 8-bit MCU, 7KB Flash, 16-bit PWM, 14-PDIP | Microchip
PIC16F1574-E/P

PIC16F1574-E/P - 8-bit MCU, 7KB Flash, 16-bit PWM, 14-PDIP | Microchip

The Microchip Technology PIC16F1574-E/P is an 8-bit RISC PIC16-family microcontroller integrating 7KB of self-programmable Flash program memory, 512 bytes of SRAM, and 16-bit high-resolution PWM peripherals in a 14-pin PDIP through-hole package. The device executes instructions at up to 32 MHz from its internal oscillator, drawing microamp-level idle currents typical of the nanoWatt XLP platform. The -E temperature grade extends operation from -40C to +125C, supporting industrial and harsh-environment deployments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable I/O peripherals on one die. Within the broader hierarchy, the PIC16F1574-E/P belongs to the PIC16F family of mid-range 8-bit microcontrollers, which in turn belongs to the class of microcontrollers within embedded processors, and ultimately to the integrated circuit / semiconductor taxonomy. The 8-bit PIC16 architecture uses a Harvard-style separated program/data bus and a RISC instruction set, which simplifies compiler output and reduces deterministic interrupt latency - properties valued in real-time control firmware. Key features of the PIC16F1574-E/P include four independent 16-bit PWM channels (suitable for LED dimming, motor control, and digital power conversion), an 8-channel 10-bit ADC, two comparators, one 5-bit DAC channel, a Complementary Waveform Generator (CWG), and Peripheral Pin Select (PPS) for flexible signal routing. The chip integrates 7 timers and supports up to 11 I/O pins on the 14-pin package. The 16-bit PWM at 32 MHz delivers a time-step of roughly 16 ns - over 4000x finer resolution than a typical 8-bit PWM, enabling smooth LED fade transitions and precise switching-converter duty cycles. Architecture-wise, the PIC16F1574-E/P uses Microchip's enhanced mid-range core with a 14-bit instruction word. The on-chip Charge Time Measurement Unit (CTMU) supports capacitive touch sensing, while the CWG block generates complementary MOSFET drive signals with programmable dead-band for half-bridge and full-bridge power stages. The XLP (eXtreme Low Power) design delivers typical sleep currents below 1 uA, allowing battery-powered nodes to operate for years from a single cell. Typical applications include LED lighting controllers and color-mixing drivers, small brushed DC motor speed regulators, fan RPM controllers, sensor-interface nodes with analog front ends, low-cost power-supply supervisory circuits, and educational/hobbyist projects that benefit from the breadboard-friendly PDIP-14 footprint. When designing with this part, allocate the PPS remapping carefully because only a subset of digital peripherals can be routed to each physical I/O pin; consult the device datasheet pin allocation table. For analog designs, do not exceed the absolute maximum rating on VDD (5.5 V) and ensure the MCLR pin is pulled high through a 10 kohm resistor for normal operation. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1574-E/SL - 8-bit MCU, 7KB Flash, 16-bit PWM | Microchip
PIC16F1574-E/SL

PIC16F1574-E/SL - 8-bit MCU, 7KB Flash, 16-bit PWM | Microchip

The Microchip Technology PIC16F1574-E/SL is an 8-bit PIC16 microcontroller featuring 7KB Flash program memory, 512B RAM, four 16-bit PWMs with independent timers, a 10-bit ADC, a 5-bit DAC, comparators, CWG (Complementary Waveform Generator), PPS (Peripheral Pin Select), and EUSART, all integrated in a 14-pin SOIC (SL) package. It operates at up to 32 MHz across a 1.8V-5.5V supply range, with the -E suffix denoting the extended -40C to +125C operating temperature grade. What is a PIC16 microcontroller? An 8-bit PIC16 microcontroller is a RISC-based CMOS MCU from Microchip's mid-range family, sitting in the hierarchy: PIC16 -> PIC MCU family -> 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. These devices are widely used in embedded control because they combine deterministic instruction execution, ultra-low power sleep modes, configurable peripherals, and a mature toolchain (MPLAB X IDE, XC8 compiler, PICkit programmers). The PIC16F1574 delivers four 16-bit PWMs with independent timers at a base oscillator of 32 MHz - enabling high-resolution timing for digital LED lighting, motor control, and analog-feedback loops. Its 10-bit ADC with up to 8 channels, 5-bit DAC, and two comparators allow mixed-signal feedback without external ICs. The CWG peripheral generates complementary outputs with programmable dead-band for half-bridge and full-bridge drivers. PPS remaps digital peripherals to nearly any I/O pin, simplifying PCB routing. Typical applications include high-resolution LED lighting controllers, BLDC and brushed-DC motor drivers, fan speed controllers, battery chargers, and general-purpose sensor interface nodes. The 14-pin SOIC package keeps the BOM footprint compact for cost-sensitive designs, and the wide 1.8V-5.5V supply range allows direct Li-ion or 3.3V/5V system integration. When designing with the PIC16F1574, ensure the ICSP pins (RB6/RA0 area) are not loaded in a way that prevents in-circuit programming. Use the Configuration Words register to set oscillator, watchdog, brown-out, and code-protect options before any application code runs.

見積もり お問い合わせ
PIC16F1574-E/ST - 8-bit MCU, 7KB Flash, 4x 16-bit PWM | Microchip
PIC16F1574-E/ST

PIC16F1574-E/ST - 8-bit MCU, 7KB Flash, 4x 16-bit PWM | Microchip

The Microchip Technology PIC16F1574-E/ST is an 8-bit PIC16 microcontroller from the PIC16F157x family, featuring 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM, housed in a 14-pin TSSOP package. It runs at a maximum CPU clock of 32 MHz with an instruction cycle of 125 ns, integrating four independent 16-bit PWMs, a 10-bit Analog-to-Digital Converter (ADC) with up to 8 channels, a Complementary Waveform Generator (CWG), and Configurable Logic Cells (CLC) for hardware-level customization without firmware overhead. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals such as timers, ADCs, and communication interfaces. The PIC16F1574 sits in the 8-bit mid-range tier of Microchip's product hierarchy: 8-bit MCU -> PIC microcontroller -> PIC16 family -> enhanced mid-range core -> microcontroller IC -> semiconductor. It targets cost-sensitive embedded applications requiring precision PWM control beyond what 10-bit timers provide. Key features include 4x hardware 16-bit PWM outputs ideal for high-resolution LED dimming, motor control, and digital power conversion; a 10-bit ADC with computation (ADC2) supporting averaging and threshold comparison to offload the CPU; Configurable Logic Cells (CLC) that implement combinational/sequential logic in hardware; and Core Independent Peripherals (CIPs) that handle tasks without CPU intervention. The 14-pin TSSOP footprint makes it one of the smallest PIC16 parts with 16-bit PWM capability. The PIC16F1574 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, supports in-circuit serial programming (ICSP) via two pins, and operates from 1.8 V to 5.5 V across an industrial -40 °C to +125 °C temperature range (the -E suffix indicates extended temperature). Internal oscillator options up to 32 MHz eliminate the need for external crystals in cost-sensitive designs. Typical applications include LED lighting drivers requiring high-resolution dimming, BLDC motor control loops, battery chargers using PWM-based regulation, and consumer appliances needing multiple PWM channels. The combination of 16-bit PWM, CWG, and CLC enables fan controllers and small-format power converters in compact form factors. When designing with this device, ensure the ICSP programming pins (ICSPCLK/ICSPDAT) are isolated from application circuitry to avoid contention during programming. The CLC, CWG, and PWM peripherals can be linked in hardware before the CPU wakes, reducing firmware complexity and enabling deterministic latency for safety-critical or timing-sensitive loops. This page synthesizes verified distributor pricing, parametric drop-in alternatives, and practical design considerations that go beyond the manufacturer datasheet, helping engineers shorten the BOM selection and qualification cycle for new designs.

見積もり お問い合わせ
PIC16F1574-I/P - 8-Bit MCU, 7KB Flash, 16-bit PWM, 14-PDIP | Microchip
PIC16F1574-I/P

PIC16F1574-I/P - 8-Bit MCU, 7KB Flash, 16-bit PWM, 14-PDIP | Microchip

The Microchip Technology PIC16F1574-I/P is an 8-bit PIC16 microcontroller with 7KB (4K x 14) Flash program memory, 512 bytes of SRAM, and four independent 16-bit PWMs operating at up to 32 MHz, housed in a 14-pin PDIP through-hole package. It integrates a 10-bit ADC, a 5-bit DAC, comparators, Complementary Waveform Generator (CWG), Peripheral Pin Select (PPS), and an EUSART module, making it a compact analog + digital mixed-signal MCU. An 8-bit PIC microcontroller is a RISC (Reduced Instruction Set Computer) device with a Harvard architecture that executes one instruction per clock cycle (except branches), giving deterministic real-time performance. PIC16F1574 belongs to the PIC16F1xxx enhanced mid-range family, which adds Peripheral Pin Select for flexible I/O routing, numerically controlled oscillator (NCO) and CWG peripherals, sitting in the broader hierarchy: PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded computing -> semiconductor. This background helps explain why the device targets cost-sensitive mixed-signal applications. Key features include 32 MHz maximum CPU clock (8 MIPS), 16-bit PWM with four independent timers for high-resolution outputs, integrated 5-bit DAC for bias generation, configurable logic cell (CLC), and 1.8V to 5.5V wide operating voltage. The device's 16-bit PWM resolution is significantly finer than the 10-bit PWM found on older PIC16F1xxx parts, enabling smoother LED dimming and more precise motor control without external hardware. Technically, the PIC16F1574 uses Microchip's enhanced mid-range core (49 instructions, 16-level hardware stack) with a 2-phase on-chip oscillator and nanoWatt XLP (eXtreme Low Power) technology providing typical sleep currents below 50 nA. The CWG module generates complementary outputs with programmable dead-band control for half-bridge drivers, eliminating external timing circuitry in FET drive applications. Typical applications include LED lighting drivers (using 16-bit PWM for color-mixing), small BLDC/PMSM motor control (CWG + PWM), bias generators for power-supply feedback loops (5-bit DAC), and compact sensor signal-conditioning modules (OPA + ADC + EUSART). The 14-pin PDIP package is convenient for breadboard prototyping, hobbyist projects, and through-hole assembly. When designing, ensure decoupling is placed close to VDD/VSS with a 0.1 uF ceramic plus bulk capacitor. The PPS system reassigns peripheral pins but the underlying pin-function matrix must still be respected. For new designs targeting surface-mount, consider the 14-pin SOIC/TSSOP variant of the same die (PIC16F1574-I/SN or I/ST). This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in a bare datasheet summary, helping engineers shortlist the PIC16F1574-I/P for mixed-signal embedded designs.

見積もり お問い合わせ
PIC16F1574-I/ST - 8-Bit 32MHz MCU, 7KB Flash | Microchip
PIC16F1574-I/ST

PIC16F1574-I/ST - 8-Bit 32MHz MCU, 7KB Flash | Microchip

The Microchip Technology PIC16F1574-I/ST is an 8-bit PIC16 microcontroller that combines a 32 MHz MIPS core with high-precision 16-bit Pulse-Width Modulation (PWM) peripherals, 7 KB of Flash program memory, and a 10-bit Analog-to-Digital Converter (ADC), all integrated into a 14-pin Thin Shrink Small Outline Package (TSSOP-14). It belongs to the PIC16F157x family of 14/20-pin microcontrollers designed to suit a variety of applications that demand both analog signal conditioning and fine-grained digital waveform generation. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC16F1574 sits within the broader PIC16 mid-range family and inherits the enhanced mid-range CPU core architecture, balancing deterministic interrupt response with low power consumption. Hypernyms for this part include: PIC16 -> PIC mid-range -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. Synonyms commonly used in datasheets include "MCU", "microcontroller unit", and "microcomputer". Key features include 7 KB (4K x 14) self-programmable Flash, 512 bytes of RAM, 128 bytes of high-endurance EEPROM, four 16-bit PWMs with independent timing, a 10-bit ADC with up to 8 channels, a 5-bit Digital-to-Analog Converter (DAC), and integrated Core Independent Peripherals (CIPs). The device operates from 1.8 V to 5.5 V across an industrial temperature range of -40 °C to +85 °C, with typical active current below 1 mA at 32 MHz. The TSSOP-14 package is RoHS-compliant and uses industry-standard JEDEC JESD51 thermal and J-STD-020 MSL-1 moisture sensitivity ratings. The architecture pairs the enhanced mid-range core with the 16-bit PWM peripheral that supports edge-aligned, center-aligned, and complementary output modes. Combined with the 5-bit DAC and comparator-based CIPs, the device can implement closed-loop LED dimming, motor control loops, and signal-generation tasks without CPU intervention. In-system programmability via ICSP and EUSART-based bootloader options support field firmware upgrades, while the 32 MHz internal oscillator eliminates an external crystal in many designs. Typical applications include LED lighting control and color-mixing drivers, brushed DC motor and small fan speed controllers, general-purpose sensor signal conditioning, low-cost consumer appliances, and battery-powered IoT nodes that require a mix of analog measurement and PWM output. The 16-bit PWM also suits small stepper/digital-to-analog synthesis tasks. When designing with this part, note that pin count is limited to 14, so multiplex peripheral assignments carefully. Use MPLAB X IDE with the XC8 compiler and MPLAB Code Configurator for peripheral setup; both are free downloads from Microchip. This page consolidates distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, giving engineers and buyers a single source for PIC16F1574-I/ST evaluation.

見積もり お問い合わせ
PIC16F1574T-I/JQ - 8-bit MCU, 7KB Flash, 32MHz, 16-UQFN | Microchip
PIC16F1574T-I/JQ

PIC16F1574T-I/JQ - 8-bit MCU, 7KB Flash, 32MHz, 16-UQFN | Microchip

The Microchip Technology PIC16F1574T-I/JQ is an 8-bit PIC microcontroller built around the PIC16F core with 7KB of Flash program memory (4K x 14 words), 512 bytes of RAM, and a maximum CPU clock of 32 MHz, housed in a 16-pin UQFN (4x4 mm) no-lead surface-mount package. It integrates four 16-bit PWMs with independent timers, a 10-bit ADC, and the standard PIC16F peripheral set for general-purpose embedded control. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash), working memory (RAM), and on-chip peripherals such as ADCs, timers, communication interfaces, and pulse-width modulators. MCUs are widely used in embedded systems to sense, decide, and actuate in products ranging from LED drivers to household appliances. The PIC16F1574 belongs to the PIC16F family of mid-range 8-bit microcontrollers, sitting within the broader PIC microcontroller -> 8-bit microcontroller -> microcontroller -> embedded processor hierarchy. Its 16-bit PWM capability in an 8-bit core gives it an unusual combination of high-resolution analog and a low-cost instruction set. Key features of the PIC16F1574T-I/JQ include 7KB Flash, 512B RAM, four 16-bit PWMs for high-resolution LED lighting or motor control, a 10-bit ADC with multiple channels, and an industrial-grade -40C to +85C operating temperature range. The 'I' suffix denotes the industrial temperature grade and 'T' indicates Tape & Reel packaging, while 'JQ' is Microchip's package designator for the 16-pin UQFN (4x4). The 32 MHz internal oscillator combined with the 16-bit PWMs enables fine dimming steps and tight motor speed loops. The PIC16F1574T-I/JQ's internal architecture uses a Harvard RISC core with a 14-bit instruction word, separate code and data buses, and core-independent peripherals that offload timing-critical functions from the CPU. This makes it well-suited to LED lighting controllers, stepper motor drivers, and other applications where deterministic PWM behavior matters more than raw compute throughput. Typical applications for the PIC16F1574T-I/JQ include LED lighting control (especially dimmable drivers), small DC-DC and SEPIC power supplies, stepper and brushed DC motor control, fan and pump speed controllers, and general-purpose analog signal conditioning with PWM output. The combination of 16-bit PWM and 10-bit ADC allows closed-loop digital control loops that are difficult to achieve with traditional 8-bit PWMs. When designing with this part, ensure the UQFN-16 land pattern pads and the exposed thermal pad connection are matched to the chosen PCB footprint; the small 4x4 mm package has limited heat dissipation and benefits from at least a modest thermal copper pour. Programming is supported through Microchip's MPLAB X IDE with PICkit, ICD, or Snap programmers, and the configuration bits control oscillator, watchdog, brown-out reset, and code protection options.

見積もり お問い合わせ
PIC16F1574T-I/ST - 8-bit MCU, 7KB Flash, 16-bit PWM, 14-TSSOP | Microchip
PIC16F1574T-I/ST

PIC16F1574T-I/ST - 8-bit MCU, 7KB Flash, 16-bit PWM, 14-TSSOP | Microchip

The Microchip PIC16F1574T-I/ST is an 8-bit PIC microcontroller featuring 7 KB Flash program memory, 512 B RAM, four 16-bit PWMs with independent timers, and a 10-bit ADC, housed in a 14-pin TSSOP (ST) package. The device combines high-resolution PWM capability with analog peripherals and operates across a wide 1.8 V to 5.5 V voltage range, making it suitable for LED lighting, motor control, and general-purpose embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a range of peripherals such as timers, ADC modules, communication interfaces, and PWM channels. The PIC16F1574 belongs to the 8-bit PIC16 enhanced mid-range family and sits within the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. By integrating high-resolution 16-bit PWMs alongside a 10-bit ADC, the device targets mixed-signal applications where both precise timing and analog measurement are required. Key features include four 16-bit PWM channels with independent time bases for high-resolution control, a 10-bit Analog-to-Digital Converter (ADC) for sensor interfacing, an internal oscillator, and multiple communication peripherals. The integrated Core Independent Peripherals (CIPs) offload tasks from the CPU, allowing deterministic timing for LED dimming, fan control, and power-conversion feedback loops. The TSSOP-14 package delivers a small PCB footprint of approximately 5.0 mm x 4.4 mm. The PIC16F1574 uses Microchip's enhanced mid-range 8-bit core, executes most instructions in a single clock cycle, and supports up to 32 MHz internal oscillator operation. Program memory is Flash-based, enabling in-circuit serial programming (ICSP) for field updates and rapid prototyping. Typical applications include LED lighting drivers (constant-current dimming), DC-DC converter digital control, fan and pump speed control, sensor signal conditioning, and general-purpose IoT edge nodes. In LED lighting, the four 16-bit PWMs enable smooth dimming curves; in motor control, they provide precise duty-cycle adjustment for low-RPM torque control. When designing with this device, ensure input voltage stays within 1.8 V-5.5 V and respect absolute maximum ratings. The TSSOP-14 package requires standard SMD reflow; solder-pad design should follow JEDEC J-STD-020 MSL classification. Programming requires a Microchip PICkit, Snap, or ICD programmer. This page synthesizes distributor pricing from LCSC and Mouser, drop-in alternatives within the PIC16F157x family, and practical design notes for 16-bit PWM applications not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1575-E/JQ - 8-bit MCU, 14KB Flash, 4x16-bit PWM, 16-UQFN
PIC16F1575-E/JQ

PIC16F1575-E/JQ - 8-bit MCU, 14KB Flash, 4x16-bit PWM, 16-UQFN

The Microchip Technology PIC16F1575-E/JQ is an 8-bit RISC PIC microcontroller featuring a PIC16 enhanced mid-range core, 14 KB (8K x 14 words) of Flash program memory, 1 KB of RAM, and four independent 16-bit PWMs with dedicated timers. Housed in a 16-pin UQFN (4x4 mm) package, it operates at up to 32 MHz and integrates a 10-bit ADC with up to 8 channels, a high-performance comparator, and on-chip EEPROM emulation through Flash self-write. The /JQ package suffix denotes the 16-lead 4x4 mm UQFN, while the /E indicates the -40C to +125C extended operating temperature range targeting industrial and automotive-grade applications. An 8-bit PIC microcontroller is a single-chip computer built on Microchip's proprietary RISC architecture that executes one instruction per clock cycle (except branches). PIC MCUs are widely used in embedded control because they offer deterministic interrupt latency, low power consumption, compact code, and a rich peripheral set including ADC, PWM, comparators and serial interfaces. Within the microcontroller hierarchy, PIC16 sits in Microchip's mid-range family above the baseline PIC10/PIC12 and below the PIC18 high-tier and dsPIC/PIC32 16-bit/32-bit families, making it a workhorse for cost-sensitive, peripheral-rich designs. Key features of the PIC16F1575 include four 16-bit PWMs with independent timers for high-resolution applications such as LED lighting and motor control, a 10-bit ADC capable of up to 8 analog input channels, an internal oscillator with calibrated accuracy and software-tunable frequency, and zero-cross detection support via on-chip comparators. These features allow the device to replace multiple discrete timers or analog components in lighting and power-conversion designs, lowering BOM cost and PCB area. Architecturally, the PIC16F1575 uses a 14-bit instruction word with an 8-bit data path and a hardware stack of 16 levels, with 35 instructions including hardware multiply. Its peripheral pin select (PPS) provides flexible I/O remapping on selected pins, while the four 16-bit PWM channels share timers 2/4/6/8, enabling phase-shifted or complementary drive patterns for full-bridge and half-bridge topologies without external logic. Typical applications for the PIC16F1575-E/JQ include high-resolution LED lighting drivers, DC-DC and digital power conversion, motor control loops, IoT sensor nodes, and consumer/industrial control boards where its combination of 14 KB Flash, four 16-bit PWMs, and compact 16-UQFN footprint is well-matched to space-constrained PCBs. When designing with this part, ensure the 16-UQFN exposed pad is soldered to a sufficient ground copper pour for thermal dissipation, since UQFN packages rely primarily on PCB copper rather than leadframes for heat removal. The wide 1.8V to 5.5V operating range supports both 3.3V and 5V rails commonly used in industrial designs. This page synthesizes distributor pricing, drop-in same-package alternatives, application-specific design notes, and a parametric comparison table that complements - rather than duplicates - the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1575-E/ST - 8-bit MCU, 14KB Flash, 16-bit PWM, TSSOP-14
PIC16F1575-E/ST

PIC16F1575-E/ST - 8-bit MCU, 14KB Flash, 16-bit PWM, TSSOP-14

The Microchip Technology PIC16F1575-E/ST is an 8-bit PIC16 microcontroller combining four 16-bit PWMs with independent timers and an analog peripheral set, housed in a 14-pin TSSOP package rated for the -40C to +125C extended temperature range. It integrates 14KB of Flash program memory, 1KB of data SRAM, 10-bit ADC, 5-bit DAC, two comparators, a complementary waveform generator (CWG), and an EUSART. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU, non-volatile program memory, working RAM, and on-chip peripherals. The PIC16F1575 belongs to the Microchip mid-range 8-bit MCU family, which sits in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. Mid-range 8-bit cores are favored for deterministic real-time control where predictable instruction timing matters more than raw compute throughput. Key features include four independent 16-bit PWMs with hardware triggering for LED dimming and motor control, peripheral pin select (PPS) for flexible signal routing, a 10-bit ADC with internal voltage reference, and a 5-bit DAC for analog set-point generation. The complementary waveform generator produces complementary drive signals with programmable dead-band, which simplifies half-bridge and full-bridge switching stages. Architecturally the device uses a 14-bit instruction word RISC core running up to 32 MHz, with an instruction fetch pipeline that delivers most instructions in one cycle. The 16-bit PWM modules derive their time base from Fosc/4 or an external source, providing 16 ns resolution at 32 MHz and supporting center-aligned, edge-aligned, and variable-phase modes. Typical applications include LED lighting dimming and color mixing, switched-mode power supply control, battery charging, small motor control (BLDC, stepper, and brushed DC), and sensor signal conditioning. The integrated CWG and comparators support peak current mode control without an external PWM controller. When designing with this part, allocate the 14-pin budget carefully: VDD, VSS, MCLR, and programming/debug pins (ICSPCLK/ICSPDAT) consume four, leaving ten GPIOs. PPS remaps most digital peripherals so any digital function can land on most pins, easing PCB layout. This page synthesizes distributor pricing, drop-in PIC16F157x family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1575-I/JQ - 8-bit MCU, 14KB Flash, 32MHz, 16-UQFN | Microchip
PIC16F1575-I/JQ

PIC16F1575-I/JQ - 8-bit MCU, 14KB Flash, 32MHz, 16-UQFN | Microchip

The Microchip Technology PIC16F1575-I/JQ is an 8-bit PIC microcontroller with 14KB Flash program memory, 1KB RAM, and a 32MHz maximum CPU speed, housed in a 16-pin UQFN (4x4 mm) package with exposed pad. The 'I' suffix denotes the industrial temperature grade (-40C to +85C) and 'JQ' identifies the 16-UQFN package option. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single chip. The PIC16F1575 belongs to the PIC® 16F family of 8-bit RISC microcontrollers built on a CMOS process, positioned above 8-bit baseline PIC10/12/16 and below the 16-bit dsPIC/PIC24 and 32-bit PIC32MX architectures. Within Microchip's broader portfolio it sits in the Enhanced Mid-Range core family, suitable for digital control and signal-conditioning applications. Key features include four independent 16-bit PWM channels with dedicated timers for high-resolution output, a 10-bit ADC with up to 8 input channels, a 5-bit DAC, two comparators, and four 8-bit timers plus one 16-bit timer. Peripherals are routed via the Peripheral Pin Select (PPS) system, allowing flexible pin assignment. The 16-UQFN package provides compact board-area, and the exposed thermal pad improves heat dissipation at higher operating frequencies. The device integrates a high-speed 32MHz internal oscillator, configurable clock options, eXtreme Low Power (XLP) sleep modes, and Core Independent Peripherals (CIPs) that reduce CPU overhead. In-circuit debugging is supported via Microchip's MPLAB ICD programming/debug interface, and code is developed in MPLAB X IDE with XC8 compilers. Typical applications include LED lighting and color-mixing controllers, motor control and small DC driver boards, sensor signal conditioning, battery-powered IoT end nodes, and consumer white goods. The four 16-bit PWMs are particularly suited to high-resolution dimming or color-control loops. When designing with this MCU, observe UQFN PCB layout guidelines: stitch vias under the exposed pad to a continuous inner ground plane for thermal and electrical performance, and keep analog/digital traces short and isolated. Use MPLAB X IDE and a PICkit or ICD debugger for in-system programming. This page synthesizes distributor pricing, same-package PIC16 family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1575-I/P - 8-Bit 32MHz 14KB Flash MCU with 16-bit PWM | Microchip
PIC16F1575-I/P

PIC16F1575-I/P - 8-Bit 32MHz 14KB Flash MCU with 16-bit PWM | Microchip

The Microchip Technology PIC16F1575-I/P is an 8-bit PIC16 RISC microcontroller with 14 KB (8K x 14 words) of Flash program memory, 1 KB of RAM, a 32 MHz maximum clock, a 10-bit ADC and four 16-bit hardware PWM channels, housed in a 14-pin through-hole PDP (14-PDIP) package. The -I suffix denotes the industrial temperature grade, -40 to +85 degrees C. An 8-bit MCU is a microcontroller whose CPU and peripherals operate on an 8-bit data bus. The PIC16 family sits at the bottom of the Microchip MCU hierarchy: 8-bit MCU -> PIC16 core -> microcontroller -> embedded semiconductor. Microcontrollers integrate a CPU core, program memory, data memory, timers, analog converters and communication peripherals into one package, so a single device can replace a discrete CPU plus surrounding glue logic. The PIC16F1575 belongs to the PIC16(L)F157X family, which the manufacturer describes as combining 16-bit PWM capability with analog peripherals. Four independent 16-bit PWM channels with dedicated timers deliver high resolution duty-cycle control, which is why this family targets LED lighting drivers, general illumination and motor control. A 5-bit DAC provides a simple analog output for set-point or bias generation, and the 10-bit ADC handles sensor acquisition with 1024 discrete steps. Key features include 32 MHz operation from an internal 8 MHz oscillator with a 4x PLL, programmable brown-out detection, a 16-level deep sleep capability, and multiple serial peripherals such as UART, SPI and I2C with automatic peripheral pin-select. Flash program memory supports In-Circuit Serial Programming (ICSP) and the device can be configured through the Microchip MPLAB X toolchain and PICkit debuggers. Typical applications include multi-channel LED dimming and RGB colour mixing, fan and small-motor speed control, industrial sensor conditioning, and cost-sensitive consumer products such as lighting ballasts, appliance controls and battery chargers. A key design consideration is pin multiplexing: on this 14-pin device several I/O pins are shared with the analog inputs, comparators, PWM outputs and the MCLR function, so the pin-assignment table in the manufacturer datasheet must be reviewed before the PCB footprint is frozen. This page combines manufacturer device information, distributor availability, drop-in alternatives in the same 14-pin DIP footprint, comparison tables and practical design notes so engineers can evaluate the PIC16F1575-I/P against neighbouring PIC16 devices without pulling the full datasheet apart first.

見積もり お問い合わせ
PIC16F1575-I/SL - 8-Bit MCU, 32MHz, 14KB Flash | Microchip
PIC16F1575-I/SL

PIC16F1575-I/SL - 8-Bit MCU, 32MHz, 14KB Flash | Microchip

The Microchip Technology PIC16F1575-I/SL is an 8-bit PIC microcontroller from the PIC16F157x family, delivering up to 32 MHz CPU performance with 14 KB (8K x 14 words) of Flash program memory and 1024 bytes of RAM in a 14-pin SOIC (SL) package. The device integrates four 16-bit Pulse-Width Modulation (PWM) peripherals with independent timers, a 10-bit Analog-to-Digital Converter (ADC), and Core Independent Peripherals (CIPs) that allow hardware-driven functions without CPU intervention. According to the manufacturer datasheet, the part operates from 2.3 V to 5.5 V across the industrial -40 C to +85 C temperature range and is housed in a 14-SOIC 150-mil package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a mix of analog and digital peripherals. Within the broader taxonomy, the PIC16F1575 sits under 8-bit microcontrollers -> microcontrollers -> microprocessors & MCUs -> embedded processors -> semiconductors. Its enhanced mid-range (XLP) core supports a 49-instruction set with 16 hardware stack levels and deterministic interrupt latency, making it appropriate for real-time control tasks where predictability matters more than raw throughput. Key differentiating features of the PIC16F1575-I/SL include its four 16-bit PWMs (each with dedicated timer base and period register, capable of edge-aligned and center-aligned modes), 10-bit ADC with acquisition timer, 5-bit DAC, comparator, EUSART, MSSP (SPI/I2C), two 8-bit timers, one 16-bit timer, and 12 I/O pins. The device also features the eXtreme Low Power (XLP) sleep mode drawing sub-microamp currents for battery-driven designs. Architecturally, the PIC16F1575 employs a Harvard RISC architecture with separate program and data buses, allowing instruction fetch and data access in a single clock cycle. The on-chip high-precision 16 MHz internal oscillator can be used directly or scaled to 32 MHz via the 4x Phase-Locked Loop, removing the need for external crystals in cost-sensitive designs. Configurable logic cells (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) provide synthesizable digital functions in hardware, freeing the core for higher-level tasks. Typical applications include LED lighting drivers (where the four 16-bit PWMs allow individual channel intensity control for RGBW strips), stepper and brushed DC motor control, switch-mode power supply (SMPS) digital control loops, battery chargers, fan controllers, and general-purpose sensor interfacing. The 10-bit ADC and op-amp peripheral allow direct signal conditioning of low-level analog inputs without external components. When designing with this MCU, pay particular attention to the maximum I/O current budget (per-pin and aggregate) and the recommended decoupling network (typically 100 nF plus 10 uF bulk near VDD). The internal oscillator is factory-calibrated to +/- 1 % across voltage and temperature, but a software PLL trim can tighten this further for time-sensitive protocols such as UART at high baud rates. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F157x and PIC16F152x families, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1575-I/ST - 8-bit MCU, 14KB Flash, 16-bit PWM, 14-TSSOP | Microchip
PIC16F1575-I/ST

PIC16F1575-I/ST - 8-bit MCU, 14KB Flash, 16-bit PWM, 14-TSSOP | Microchip

The Microchip Technology PIC16F1575-I/ST is an 8-bit PIC16 microcontroller featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32 MHz, housed in a 14-pin TSSOP (ST) package with industrial -40C to +85C temperature rating. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripherals such as timers, ADCs, and communication interfaces into one device. The PIC16F1575 belongs to Microchip's enhanced mid-range PIC16F1xxx family, which sits architecturally above baseline PIC10/12/16 cores and below the 16-bit PIC24/dsPIC families. Its defining peripheral set combines four 16-bit Pulse-Width Modulation (PWM) channels with complementary outputs and a 10-bit Analog-to-Digital Converter (ADC), enabling mixed-signal and precision-power applications from a small-footprint device. Key features of the PIC16F1575-I/ST include four independent 16-bit PWMs with dedicated timers, a 10-bit ADC with up to 12 channels (part-dependent), 1KB SRAM, 256 bytes of EEPROM, configurable internal oscillator, and nanoWatt XLP extreme-low-power technology for sleep currents in the nanoampere range. The integrated Core Independent Peripherals (CIPs) - including the 16-bit PWM, Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) - allow deterministic hardware-driven tasks without CPU intervention, reducing firmware complexity and power consumption. The PIC16F1575-I/ST is engineered for applications where high-resolution PWM is required in a compact 14-pin footprint. Typical uses include LED lighting drivers, digital power conversion, motor control loops, and battery-powered sensor nodes. Its 16-bit PWM resolution enables fine-grained dimming curves in lighting and tight regulation in switch-mode power supplies, while the 10-bit ADC supports closed-loop current and voltage sensing for adaptive control. When designing with this MCU, use the MPLAB X IDE and the free MPLAB Code Configurator (MCC) plug-in to generate peripheral initialization code. Place a 100 nF decoupling capacitor close to VDD, and configure the configuration bits for the desired oscillator source and watchdog timer behavior. Avoid driving LEDs directly from logic pins without current-limiting resistors; use a MOSFET driver or the integrated PWM to control external switching transistors for higher-current loads. This page combines distributor pricing, drop-in alternatives in the same 14-TSSOP footprint, and practical design notes that go beyond what the manufacturer datasheet alone provides, helping engineers select, source, and integrate the PIC16F1575-I/ST with confidence.

見積もり お問い合わせ
PIC16F1575T-I/JQ - 8-Bit MCU, 14KB Flash, 16-bit PWM | Microchip
PIC16F1575T-I/JQ

PIC16F1575T-I/JQ - 8-Bit MCU, 14KB Flash, 16-bit PWM | Microchip

The Microchip Technology PIC16F1575T-I/JQ is an 8-bit PIC microcontroller with 14KB Flash, 1KB RAM, and four independent 16-bit PWMs, packaged in a 16-pin UQFN (4x4 mm) with exposed pad. The core runs at up to 32MHz, integrates a 10-bit ADC with up to 8 channels, a 5-bit DAC, and two comparators. Operating voltage spans 1.8V to 5.5V across the industrial temperature range (-40C to +85C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and programmable peripherals. The PIC16F1575 sits in the 8-bit RISC family and combines general-purpose digital I/O, high-resolution analog, and flexible PWM generation. Within the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor IC. This device is optimized for applications that demand both analog signal conditioning and precise PWM timing in a small footprint. Key features include four 16-bit PWM channels with independent timers for high-resolution dimming and motor control, a 10-bit ADC with eight input channels, a 5-bit DAC for reference generation, two comparators with rail-to-rail inputs, and 1KB of RAM with 14KB of self-programmable Flash. The device also supports in-circuit serial programming (ICSP) and Microchip's enhanced mid-range core with 49 instructions and 16-level hardware stack. Architecturally, the PIC16F1575 uses an enhanced mid-range 8-bit RISC core with a hardware multiplier-free instruction set, deep pipeline, and a deterministic interrupt controller. The four 16-bit PWMs each run from independent time bases, enabling phase-shifted or synchronized outputs without CPU intervention. The integrated Core Independent Peripherals (CIPs) reduce firmware overhead and allow event-driven responses to analog comparator and ADC triggers. Typical applications include LED lighting drivers, motor control, battery chargers, digital power conversion, fan control, and general-purpose embedded control nodes. The wide operating voltage range supports battery-powered and USB-powered designs, while the small UQFN footprint suits space-constrained PCB layouts such as backlight drivers and compact IoT nodes. A key design consideration is the exposed thermal pad on the UQFN package, which must be soldered to the PCB ground plane to meet thermal and electrical performance. Decoupling capacitors of 0.1uF and 1uF should be placed close to VDD with the ICSP pins reserved for in-circuit programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet. Compare against cross-brand and same-family PIC16F1574/1579 options before committing to a BOM.

見積もり お問い合わせ
PIC16F1575T-I/SL - 14KB Flash 8-bit MCU 32MHz | Microchip
PIC16F1575T-I/SL

PIC16F1575T-I/SL - 14KB Flash 8-bit MCU 32MHz | Microchip

The Microchip Technology PIC16F1575T-I/SL is an 8-bit PIC16 microcontroller featuring 14KB Flash program memory (8K x 14 words), 1KB RAM, and four 16-bit PWMs with independent timers, packaged in a 14-pin SOIC (SL) operating up to 32MHz. The device combines high-resolution PWM capability with a 10-bit ADC, 5-bit DAC, comparators, Complementary Waveform Generator (CWG), Peripheral Pin Select (PPS), and EUSART to support a wide range of mixed-signal and lighting control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals. The PIC16F family uses Microchip's enhanced mid-range 8-bit RISC architecture with a 14-bit instruction word, balancing deterministic execution, low power consumption, and ease of use. PIC microcontrollers sit within the broader taxonomy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The PIC16F1575 belongs to the PIC16(L)F157x sub-family, distinguished by 16-bit PWM peripherals for fine-grained control of LED lighting, motor drives, and power conversion. Key features include four independent 16-bit PWM channels (16-bit resolution versus the typical 10-bit PWM of competing MCUs), a 10-bit ADC with up to 12 channels, two comparators, one 5-bit DAC, CWG for dead-band control in half-bridge and full-bridge topologies, PPS for flexible pin assignment, and EUSART supporting LIN and RS-232. The wide 2.3V to 5.5V operating range (PIC16F variant, 'F' = standard voltage) covers 3.3V and 5V rails common in industrial and consumer designs. The industrial temperature grade -40C to +85C suits most indoor and protected outdoor environments. Architecturally, the PIC16F1575 uses a Harvard bus with separate program and data paths, 49 instructions, and a hardware stack depth of 16. The 32MHz internal oscillator eliminates external crystals in cost-sensitive designs. CoreMark performance is sufficient for sensor fusion, lighting protocols, and simple UI loops, while CWG plus 16-bit PWM enable direct generation of phase-shifted gate-drive waveforms without an external gate-driver IC in many cases. Typical applications include LED lighting drivers (constant-current RGBW and dim-to-warm), complementary half-bridge motor control for low-voltage BLDC fans, digital power-supply housekeeping loops, battery charging management for 1-2S Li-Ion packs, and general-purpose sensor hubs with PWM-driven haptic feedback. The four 16-bit PWMs also simplify sensorless BLDC commutation when combined with zero-cross detection from the on-chip comparators. When designing with this MCU, allocate at least one PWM channel as the system tick or for a status LED to confirm firmware boot. The PPS remapping feature simplifies PCB routing but requires careful attention to digital-isolator and boot-loader pin assignments - not every peripheral output can be routed to every I/O. This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ