マイクロコントローラ

製品 (20,000+)

PIC16F1708-E/P - 8-Bit 32MHz MCU 7KB Flash 20-PDIP | Microchip
PIC16F1708-E/P

PIC16F1708-E/P - 8-Bit 32MHz MCU 7KB Flash 20-PDIP | Microchip

The Microchip Technology PIC16F1708-E/P is an 8-bit PIC microcontroller with XLP (eXtreme Low Power) technology, integrating Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and Peripheral Pin Select (PPS) in a 20-pin PDIP through-hole package. It delivers 32 MHz CPU performance, 7 KB (4K x 14) self-programmable Flash program memory, 512 bytes RAM, and 128 bytes EEPROM for general-purpose embedded control. An 8-bit PIC microcontroller is a small, deterministic processor based on a modified Harvard architecture with separate program and data buses, optimized for low-power, real-time control tasks. PIC MCUs sit in the taxonomy microcontroller -> embedded processor -> semiconductor device, and the PIC16F1708 specifically belongs to the PIC16F1 enhanced mid-range family, which adds CIPs and on-chip op amps to the classic mid-range core. XLP technology adds sleep currents in the nanoampere range, enabling battery-powered designs that wake only on peripheral events. Key features of this part include two on-chip operational amplifiers with rail-to-rail input/output, a 10-bit ADC with computation (ADC2), a 5-bit DAC, two comparators, an 8-bit timer (Timer2), a 16-bit timer (Timer1), and PWM modules with complementary waveform generation. Zero Cross Detect (ZCD), Configurable Logic Cells (CLC), and Complementary Output Generator (COG) peripherals allow sensorless AC mains monitoring and advanced switching without CPU intervention, reducing firmware complexity. The PIC16F1708-E/P is fabricated on an advanced process with on-chip debug and trace support, MPLAB X IDE compatibility, and free XC8 compiler support. The 'E' temperature grade extends operating range to -40C to +125C, making the part suitable for industrial and outdoor environments. The 20-pin PDIP package supports breadboard prototyping and through-hole manufacturing, simplifying hobbyist and low-volume industrial designs. Typical applications include LED lighting control with constant-current regulation, AC zero-cross detection for TRIAC dimmers, sensor signal conditioning with on-chip op amps, battery-powered IoT sensor nodes leveraging XLP, and low-cost motor control using COG and PWM. The integrated analog chain eliminates external op-amp ICs in many transducer interfaces. When designing with the PIC16F1708-E/P, allocate the ADC and op-amp channels early to avoid I/O contention, and use PPS to remap peripherals to convenient pins. For AC mains designs, configure the ZCD peripheral before enabling the COG or PWM output to prevent false triggering during power-up.

見積もり お問い合わせ
PIC16F1708-E/SO - 8-bit MCU, 7KB Flash, 20-SOIC | Microchip
PIC16F1708-E/SO

PIC16F1708-E/SO - 8-bit MCU, 7KB Flash, 20-SOIC | Microchip

The Microchip Technology PIC16F1708-E/SO is an 8-bit PIC® XLP™ flash microcontroller built on Microchip’s enhanced mid-range core, delivering up to 32 MHz CPU performance with 200 ns instruction execution in a 20-pin SOIC package. It integrates 7 KB (4K × 14) of self-programmable flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, alongside on-chip Intelligent Analog peripherals including operational amplifiers, a high-speed comparator, a 10-bit ADC, an 8-bit DAC, zero-cross detect and complementary output generator. Industrial temperature range -40 °C to +125 °C (the “E” suffix) makes it suited for harsh-environment embedded control. A PIC microcontroller (Programmable Interface Controller) is a Harvard-architecture RISC device that combines a CPU core, non-volatile flash program memory, SRAM, EEPROM, and a configurable peripheral set into a single chip. It belongs to the broader 8-bit MCU family within microcontrollers, sits under the integrated circuits hierarchy, and is widely used in cost-sensitive embedded designs. The PIC16F1708 specifically targets low-power applications thanks to Microchip’s eXtreme Low Power (XLP) technology, with nanoWatt sleep modes that keep quiescent draw in the microamp range for battery-operated products. Key differentiating features include Core Independent Peripherals (CIPs) — CLC, COG, NCO, ZCD and PPS — that allow hardware-level signal conditioning without CPU intervention. The PIC16F1708 also integrates an internal voltage reference, multiple timer/counter modules (Timer0/1/2), PWM, CCP, EUSART, I²C and SPI interfaces. Together these reduce external component count and BOM cost. The 20-SOIC 7.50 mm body gives generous board mounting area for hand-soldering and is the most popular footprint in the PIC16F170x family. Typical applications include LED lighting control, small motor drive (DC and stepper via PWM + COG), sensor signal conditioning using the on-chip op-amp and DAC, battery-powered IoT sensor nodes using XLP sleep modes, white goods user-interface boards, and general-purpose digital control in industrial, automotive aftermarket and consumer products. The E temperature grade (industrial) qualifies it for outdoor and factory environments. When designing, observe the maximum 32 MHz oscillator limit, provide adequate decoupling (100 nF plus 10 µF bulk) near VDD, and reserve the MCLR pin as a reset unless intentionally disabled in configuration bits. Use PPS to remap peripherals onto a wide selection of I/O pins, allowing single PCB layouts to support multiple family variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1708-E/SS - 8-bit MCU 7KB Flash XLP | Microchip
PIC16F1708-E/SS

PIC16F1708-E/SS - 8-bit MCU 7KB Flash XLP | Microchip

The Microchip Technology PIC16F1708-E/SS is an 8-bit PIC16 enhanced mid-range flash microcontroller with on-chip op amps, Core Independent Peripherals (CLC, COG, Zero-Cross Detect), Peripheral Pin Select, and XLP extreme-low-power technology. It delivers up to 32 MHz CPU speed, 7 KB (4K x 14 words) of flash program memory, 512 bytes of RAM, and integrates a 10-bit ADC with computation (ADC²), in a 20-pin SSOP package. What is a PIC16 XLP 8-bit MCU? The PIC16F1708 belongs to Microchip's PIC16 enhanced mid-range family, a class of 8-bit CMOS RISC microcontrollers optimized for cost-sensitive, low-power embedded designs. The "XLP" designation signals Microchip's Extreme Low-Power architecture, with sleep currents in the tens of nanoamps, making the device class ideal for battery-powered and energy-harvesting products. Within the broader taxonomy it sits at: PIC16F1708 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 7 KB self-programmable flash, 512 B SRAM, hardware op-amp front ends, a 10-bit ADC with computation accelerator, two PWM modules with complementary outputs (COG), a Configurable Logic Cell (CLC), Zero-Cross Detect (ZCD), EUSART, two I²C/SPI MSSP modules, and 18 I/O pins. The EUSART and MSSP peripherals support LIN, IrDA, DMX, and SMBus protocols for connected-node applications. The PIC16F1708 architecture uses a 14-bit instruction word with 200 ns single-instruction execution at 20 MHz and 125 ns at 32 MHz, providing deterministic timing for real-time control loops. Core Independent Peripherals (CIPs) such as CLC, COG, and ZCD execute logic without CPU intervention, reducing firmware complexity and power consumption. The ADC² (Computation) engine performs averaging, filtering, oversampling, and threshold comparisons in hardware, offloading sensor-signal conditioning from the core. Typical applications include IoT sensor nodes, battery-powered home automation, LED lighting drivers with COG, white-goods and appliance control, motor control front-ends, and low-power industrial sensor transmitters. The combination of on-chip op-amps and the ADC² engine is particularly valuable in transducer-conditioning designs. When designing with this part, leverage the Peripheral Pin Select (PPS) feature to route digital peripherals to nearly any I/O, simplifying PCB layout. Configure the CLC for glue-logic replacement and use ZCD for TRIAC-based AC load switching to minimize external components. Programming uses Microchip's free MPLAB X IDE and XC8 compiler with ICD debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1708-I/ML - 8-Bit 32MHz MCU, 7KB Flash, 20-QFN | Microchip
PIC16F1708-I/ML

PIC16F1708-I/ML - 8-Bit 32MHz MCU, 7KB Flash, 20-QFN | Microchip

The Microchip Technology PIC16F1708-I/ML is an 8-bit advanced-analog flash microcontroller combining Intelligent Analog integration with low cost and eXtreme Low Power (XLP) technology, housed in a 20-pin QFN (4x4 mm) package. It delivers 32 MHz CPU performance with 7 KB of self-programmable Flash, 512 bytes of SRAM, 256 bytes of EEPROM, and integrated peripherals including on-chip rail-to-rail operational amplifiers, two high-speed comparators, Complementary Output Generator (COG/NCO), Configurable Logic Cell (CLC), Zero-Cross Detect (ZCD), Peripheral Pin Select (PPS), a 10-bit ADC, 8-bit DAC, and 2x 10-bit PWM. What is a PIC16F170x microcontroller? The PIC16F1704/1708/1709 family sits within Microchip's enhanced mid-range PIC16 lineup - an 8-bit RISC architecture MCU family used in cost-sensitive general-purpose embedded designs. It bridges low-end PIC10/12/16 baseline parts and higher-end PIC18/PIC24 devices, integrating analog functions traditionally implemented as external op-amps, comparators, and reference circuits. The -I/ML suffix indicates the industrial temperature grade (-40C to +85C) and the QFN-20 (4x4 mm) package option. Key features include 32 MHz operation (200 ns instruction execution), two on-chip op-amps, Core Independent Peripherals (CLC, COG, NCO and ZCD), EUSART, two I2C/SPI interfaces, 17 source/sink capable I/O pins, and eXtreme Low Power features including <50 nA sleep currents. The PPS module gives board designers flexibility to remap digital peripherals to most I/O pins, reducing PCB layout constraints and enabling single PCB layouts across multiple product variants. Typical applications span IoT sensor nodes, white goods and home appliances, lighting controls with TRIAC dimming via ZCD, battery chargers, power-conversion secondary-side control, low-cost medical and consumer devices, and small motor-control subsystems. The combination of analog integration and XLP low-power modes allows the device to replace multiple discrete analog components and run from small batteries for years. When designing with the PIC16F1708-I/ML, ensure the QFN exposed pad is soldered to the PCB ground plane for thermal dissipation and electrical performance. Use MPLAB X IDE with the XC8 compiler and the PICkit or ICD programmer/debugger. Consider migrating to PIC16F171x (28- and 40-pin siblings) when more peripherals are needed without changing the firmware architecture. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet to assist BOM selection and second-sourcing.

見積もり お問い合わせ
PIC16F1708-I/P - 8-Bit 32MHz 7KB Flash MCU | Microchip | 20-PDIP
PIC16F1708-I/P

PIC16F1708-I/P - 8-Bit 32MHz 7KB Flash MCU | Microchip | 20-PDIP

The Microchip Technology PIC16F1708-I/P is an 8-bit enhanced mid-range flash microcontroller that combines Intelligent Analog integration with extreme low power (XLP) technology in a 20-pin PDIP (P) package. It delivers up to 32 MHz CPU performance from a Harvard-architecture RISC core, with 200 ns instruction execution, 7 KB (4K x 14 words) of self-programmable Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, all on a 3.0 V to 5.5 V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals. The PIC16F1708 belongs to the broader 8-bit MCU category, sitting inside Microchip's PIC16 enhanced mid-range family. Within that taxonomy it nests under PIC16F1xxx generation devices that pair a RISC CPU with Core Independent Peripherals, making it well suited for sensor-front-end and battery-powered embedded products. Key features include four 10-bit ADC channels with acquisition-time hardware control, two on-chip operational amplifiers (op amps) with dedicated input muxing, an 8-bit DAC, two comparators, two PWM modules with auto-shutdown, Peripheral Pin Select (PPS) for flexible signal routing, and Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Zero Cross Detect (ZCD). The XLP deep-sleep current is typically below 50 nA, allowing years of operation from a single coin cell. The device is built on a low-power CMOS process with nanoWatt XLP technology. PPS decouples peripheral functions from physical pins, which simplifies PCB layout and lets designers re-route signals without re-spinning the board. The combination of on-chip op amps, DAC, and comparators reduces the bill of materials for analog signal-conditioning blocks. Typical applications include IoT sensor nodes, low-cost instrumentation, smart thermostats, LED lighting controllers, battery chargers, and general-purpose embedded control. The ZCD and COG peripherals make it especially attractive for TRIAC/SSR-based AC line switching and power-conversion feedback loops. When designing with this device, pay attention to the high-impedance input bias current of the on-chip op amps (typically a few nA) and decouple VDD with a 0.1 uF ceramic placed within 5 mm of the package pins. This page synthesizes distributor pricing, drop-in PDIP-20 alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1708-I/SO - 8-bit MCU, 7KB Flash, 32MHz, 20-SOIC | Microchip
PIC16F1708-I/SO

PIC16F1708-I/SO - 8-bit MCU, 7KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip PIC16F1708-I/SO is an 8-bit PIC16 enhanced mid-range flash microcontroller delivering 32 MHz CPU performance with 7 KB (4K x 14) of Flash program memory and 512 bytes of SRAM, housed in a 20-pin SOIC (SO) package. It integrates a 10-bit ADC with 8 channels, two on-chip operational amplifiers, an 8-bit DAC, and Core Independent Peripherals including Configurable Logic Cells (CLC), Complementary Output Generator (COG), Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS). The device supports 2.3V to 5.5V operation and offers XLP (eXtreme Low Power) technology for battery-friendly applications. A microcontroller (MCU) is an integrated circuit that combines a CPU, program memory (Flash), working memory (RAM), and configurable peripherals on a single die, allowing embedded systems to execute firmware while interacting with analog and digital signals. Within the broader taxonomy, a microcontroller belongs to the semiconductor category, then to the microcontrollers sub-category, then to 8-bit MCUs, and finally to the PIC16 enhanced mid-range family from Microchip Technology. The PIC16F1708 sits in the lineage of PIC16F1xxx "F1" platform parts, designed for designs that need intelligent analog integration without the cost of a 16-bit MCU. Key features include 14-pin and 20-pin variants in the same family, 32 MHz maximum clock producing 125 ns instruction cycle, hardware C compiler optimized architecture with only 49 instructions, and interrupt capability with automatic context saving. The internal oscillator can be calibrated to within 1% typical accuracy, eliminating the need for an external crystal in many designs. The MSSP (Master SSP) module supports both I2C and SPI in either master or slave mode, while the enhanced USART supports LIN, RS-232, RS-485, and IrDA protocols. The on-chip dual op-amps can be configured for signal conditioning in transducer interfaces, while the 10-bit ADC with internal voltage reference and the 8-bit DAC enable closed-loop control loops. The COG peripheral generates non-overlapping complementary PWM signals for driving power half-bridges without CPU intervention, and the CLC cells let designers build glue logic on-chip, reducing external 74-series gates and BOM cost. PPS allows digital peripheral pin remapping, simplifying PCB routing when traces need to cross sensitive analog paths. Typical applications include sensor signal conditioning with on-chip op-amps, LED lighting controllers using COG for high-side/low-side drive, battery-powered IoT sensor nodes leveraging XLP, household appliances such as coffee makers and white goods, and small motor control for fans and pumps. The 20-pin SOIC variant is especially popular for hand-solderable prototypes and through-cost-optimized consumer products. When designing with this part, configure the PPS registers once during initialization to lock peripheral pin assignments and avoid mid-run reassignment. The internal voltage reference must be enabled before ADC conversion if precise absolute readings are required; otherwise the ADC uses VDD as reference and tracks supply noise. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1708-I/SS - 8-bit MCU, 32MHz, 7KB Flash, 20-SSOP | Microchip
PIC16F1708-I/SS

PIC16F1708-I/SS - 8-bit MCU, 32MHz, 7KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16F1708-I/SS is an 8-bit PIC16 enhanced mid-range microcontroller running at up to 32 MHz instruction cycle, integrating 7 KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and a rich set of on-chip analog and digital peripherals. Housed in a 20-pin SSOP package with 0.65 mm pitch, the device is part of Microchip's PIC XLP family and combines Intelligent Analog with extreme low-power (XLP) operation for general-purpose applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable I/O peripherals. The PIC16 enhanced mid-range architecture uses a 14-bit wide instruction set and a Harvard bus structure (separate program and data paths), which keeps each instruction cycle to 200 ns at 32 MHz. Within the broader taxonomy, an MCU falls under Integrated Circuits > Microcontrollers, sitting below microprocessor and above SoC in design complexity, and the PIC16F1708 belongs specifically to the PIC16F1xxx enhanced mid-range family. Key features include two on-chip operational amplifiers, a 10-bit ADC with up to 12 channels, an 8-bit DAC, a high-speed comparator, two PWM modules with time-base, and Core Independent Peripherals (CLC, COG/NCO, Zero-Cross Detect). Peripheral Pin Select (PPS) provides signal routing flexibility, EUSART supports LIN, and I2C/SPI handle inter-IC communication. With XLP sleep current in the nA range and a wide 1.8V to 5.5V supply range, the part is optimized for battery-powered and energy-harvesting designs. The PIC16F1708 is fabricated on a low-power CMOS process and includes a programmable brown-out reset (BOR), watchdog timer with its own on-chip RC oscillator, and an in-circuit serial programming (ICSP) interface that allows field firmware upgrades without removing the chip from the board. The CLC and COG blocks implement combinatorial logic and waveform generation in hardware without CPU load. Typical applications include IoT sensor nodes, handheld instrumentation, smart-home peripherals, low-cost motor control (small BLDC fans, brushed DC, and steppers via the COG), LED lighting controllers, and battery-powered medical/wearable devices. The on-chip op amps and DAC simplify signal conditioning, eliminating external analog components and shrinking BOM cost. When designing with this MCU, allocate at least one I/O pin pair for ICSP programming (PGC/PGD), confirm the VDD/VSS decoupling network (typically 100 nF plus a bulk cap) is placed close to the pin, and verify that PPS mapping for the chosen EUSART/SPI lines does not conflict with the ICSP pins. Use the on-chip op amps in unity-gain or transimpedance configurations only after checking the input common-mode range against the supply rail. This page synthesizes distributor pricing for the PIC16F1708-I/SS, same-package drop-in alternatives in the PIC16 family, and practical design notes not consolidated in any single distributor listing.

見積もり お問い合わせ
PIC16F1708T-I/ML - 8-bit 32MHz MCU 7KB Flash | Microchip
PIC16F1708T-I/ML

PIC16F1708T-I/ML - 8-bit 32MHz MCU 7KB Flash | Microchip

The Microchip PIC16F1708T-I/ML is an 8-bit PIC16F microcontroller from the PIC® XLP™ family, featuring 7KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and a 32 MHz internal oscillator core. Housed in a 20-pin QFN (4x4 mm) package with an exposed thermal pad, the device integrates Intelligent Analog peripherals including on-chip operational amplifiers, a 10-bit ADC, an 8-bit DAC, high-speed comparators, and Core Independent Peripherals (CLC, COG, ZCD). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals. Within the broader taxonomy of semiconductors, an MCU sits under microcontrollers → embedded processors → logic devices. The PIC16F1708 belongs specifically to the PIC16 enhanced mid-range family (XLP — eXtreme Low Power), which targets battery-powered and energy-harvesting applications through nanoWatt XLP technology and multiple low-power sleep modes. Key features of the PIC16F1708 include Peripheral Pin Select (PPS), which allows on-the-fly remapping of digital peripheral I/O to physical pins for maximum PCB layout flexibility, and eXtreme Low Power (XLP) operation with sleep currents below 50 nA typical. The device supports 1.8V to 5.5V operation across an industrial -40C to +85C temperature range, making it suitable for both 3.3V and 5V designs. The on-chip op amps, comparators, and DAC reduce external component count in mixed-signal sensor-conditioning circuits. Architecturally, the PIC16F1708 uses a 14-bit instruction word with a 200 ns instruction cycle at 32 MHz, providing deterministic real-time performance well-suited for closed-loop control. The Harvard architecture separates program and data buses for predictable interrupt latency. Integrated Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Zero-Cross Detect (ZCD) execute state machines in hardware, offloading the CPU. Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, consumer appliance control, LED lighting drivers, and general-purpose mixed-signal embedded designs where small pin count, intelligent analog integration, and ultra-low sleep current are required. The 20-pin QFN is compact (4x4 mm) for space-constrained PCBs. When designing with this part, validate that the chosen programming/debug tool (PICkit 3, PICkit 4, MPLAB SNAP, ICD 4) supports the device, and select the matching MPLAB X IDE device family pack. Note that the trailing 'T' in the part number denotes Tape and Reel packaging, while the 'I' suffix indicates the industrial temperature grade. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1708T-I/SO - 8-bit 32MHz 7KB Flash MCU | Microchip
PIC16F1708T-I/SO

PIC16F1708T-I/SO - 8-bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F1708T-I/SO is a 20-pin SOIC 8-bit PIC16 microcontroller combining 7KB (4K x 14) Flash program memory with 32 MHz CPU performance and Microchip's eXtreme Low Power (XLP) technology. It integrates on-chip op amps, comparators, a 10-bit ADC, 8-bit DAC, Core Independent Peripherals (CLC, COG, Zero-Cross Detect) and Peripheral Pin Select (PPS) for flexible pin mapping. Tape-and-reel packaging with industrial temperature range (-40C to +85C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and a rich set of peripherals into one package. Within the broader taxonomy, the PIC16F1708 belongs to the 8-bit MCU category, falls under the enhanced mid-range PIC16 family, and ultimately resides inside Microchip's PIC® XLP™ 16F product line. It targets cost-sensitive applications that still require high-precision analog signal conditioning and ultra-low standby power consumption. Key features of the PIC16F1708 include 7KB Flash program memory, 512 bytes of SRAM, 256 bytes of data EEPROM, four 10-bit ADC channels with computation, two on-chip operational amplifiers, two high-speed comparators, an 8-bit DAC, two PWM modules with CCP, and an internal 32 MHz oscillator. The XLP sleep current is rated in the nanoamp range, making the part well suited to battery-powered sensor nodes. The device runs from 1.8V to 5.5V VDD with a 200 ns instruction cycle. Architecturally, the PIC16F1708 uses the enhanced mid-range 14-bit instruction set with a hardware multiplier and C language-optimized architecture. Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC) and Complementary Output Generator (COG) can offload timing-critical tasks from the CPU, freeing the core for application logic and communications. Typical applications include IoT sensor nodes, battery-powered instrumentation, low-power wireless transmitters, LED lighting controllers, and consumer appliances that need integrated analog signal conditioning. The 20-pin SOIC package is industry standard for hand-soldered prototypes and high-volume SMT production alike. When designing with this MCU, plan pin assignments early to leverage Peripheral Pin Select (PPS), which lets most digital peripherals be remapped to a wide choice of I/O pins, simplifying PCB routing. Decouple VDD with a 1uF plus 0.1uF capacitor pair placed within 5 mm of the supply pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for component evaluation, sourcing, and PCB-level design decisions.

見積もり お問い合わせ
PIC16F1709-E/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1709-E/ML

PIC16F1709-E/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709-E/ML is an 8-bit RISC microcontroller from the PIC16F170X/171X family that combines intelligent analog integration with extreme low-power (XLP) technology in a 20-pin QFN (4x4) package. The device operates up to 32 MHz, delivers 14 KB of Flash program memory (8K x 14 words), 1024 bytes of SRAM, and integrates on-chip op amps, comparators, 10-bit ADC, 8-bit DAC, Zero Cross Detect (ZCD), Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Peripheral Pin Select (PPS). An 8-bit microcontroller (MCU) is a single-chip processor that uses an 8-bit data bus and is widely deployed in embedded control applications ranging from appliance control and sensor interfacing to battery-powered IoT nodes. The PIC16F1709 sits in the hierarchy: 8-bit MCU -> PIC microcontroller -> PIC16 family -> PIC16F170X sub-family -> Microchip mid-range microcontroller portfolio. Its XLP variant designation indicates ultra-low-power design, with nanoWatt sleep currents that enable multi-year coin-cell operation. Key features include 14 KB self-programmable Flash, 1 KB RAM, 256 bytes EEPROM, hardware Peripheral Pin Select for flexible I/O mapping, on-chip 10-bit ADC with computation, two operational amplifiers, two high-speed comparators, an 8-bit DAC, Zero Cross Detect for TRIAC control, and Core Independent Peripherals (CLC, COG) that offload tasks from the CPU. The device runs from 1.8 V to 5.5 V across an industrial -40 °C to +125 °C temperature range. Architecturally, the PIC16F1709 uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier and a 14-bit instruction word. On-chip op amps, comparators, and the DAC are interconnected through an analog multiplexer to the ADC, allowing the device to perform closed-loop sensor conditioning, signal generation, and zero-crossing detection without external components. Typical applications include LED lighting control with TRIAC dimming, sensor signal conditioning, battery-powered IoT endpoints, motor control (low-power BLDC and brushed), HVAC fan control, and consumer white goods. When designing with this device, ensure that the analog peripherals (OPA, DAC, ZCD) are powered by an AVSS-cleaned rail, and that the exposed pad of the QFN package is soldered to a sufficient copper pour for thermal dissipation.

見積もり お問い合わせ
PIC16F1709-E/P - 8-Bit 32MHz MCU 14KB Flash | Microchip
PIC16F1709-E/P

PIC16F1709-E/P - 8-Bit 32MHz MCU 14KB Flash | Microchip

The Microchip Technology PIC16F1709-E/P is an 8-bit PIC microcontroller with 14KB (8K x 14) Flash program memory and 1024B RAM, running up to 32MHz, in a 20-pin PDIP (0.300 inch, 7.62mm) through-hole package. The 'E' suffix indicates the extended operating temperature grade of -40C to +125C. This cost-effective intelligent analog MCU operates from 2.5V, 3.3V, or 5V rails and is well suited for general purpose applications demanding strong analog integration with low power dissipation. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically using a Harvard or von Neumann RISC architecture with on-chip Flash, RAM, and a rich peripheral set. PIC microcontrollers from Microchip use a modified Harvard RISC core, executing most instructions in a single instruction cycle (4 clock periods). The PIC16F1709 belongs to the XLP (eXtreme Low Power) family of PIC16F MCUs, sitting within the broader taxonomy: PIC16F1709 -> PIC16F17xx -> PIC16F1xxx family -> PIC16 mid-range -> PIC microcontroller -> 8-bit MCU -> microcontroller -> semiconductor IC. Key features include on-chip operational amplifiers (Op Amps), Core Independent Peripherals (CLC configurable logic cells, COG complementary output generator, and Zero Cross Detect), Peripheral Pin Select (PPS), and a 10-bit ADC with computation, plus an 8-bit DAC. These integrated analog blocks eliminate the need for external op-amps, comparators, and signal conditioning in many designs. The XLP variant delivers nanoWatt sleep currents suitable for battery-powered applications. The PIC16F1709-E/P uses a modified Harvard architecture with separate program Flash (14KB) and data EEPROM memories accessible through FSR-based addressing. The 49 instruction set includes hardware multiply and bit-oriented operations. The enhanced mid-range core delivers 200ns instruction execution at 32MHz. The integrated Core Independent Peripherals can operate without CPU intervention, reducing firmware complexity for timing-critical tasks. Typical applications include LED lighting control with dimming, sensor signal conditioning using the on-chip op amps, battery-powered IoT endpoints, motor control loops leveraging the COG and PWM peripherals, and consumer appliances requiring touch or zero-cross sensing. The combination of low cost, integrated analog, and extreme low power makes the device especially attractive in volume production designs. Designers should leverage the Peripheral Pin Select feature to remap digital peripherals across the available I/O pins, simplifying PCB routing. Adequate decoupling (100nF plus 10uF bulk) close to VDD and the use of the on-chip op-amp calibration procedure during initialization are recommended for stable analog performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet, giving engineers a single reference for part selection, sourcing, and PCB implementation of the PIC16F1709-E/P.

見積もり お問い合わせ
PIC16F1709-E/SS - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1709-E/SS

PIC16F1709-E/SS - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709-E/SS is an 8-bit PIC microcontroller (MCU) from the PIC16F170X/171X family that combines Intelligent Analog integration with extreme low power (XLP) technology. The device delivers a 32 MHz maximum CPU clock, 14 KB (8K x 14 words) of self-programmable Flash program memory, 1024 bytes of SRAM, and 256 bytes of EEPROM, all housed in a 20-pin SSOP (Shrink Small Outline Package). It operates across a wide 2.3 V to 5.5 V supply range, making it suitable for both 3.3 V and 5 V designs, and supports industrial extended temperature from -40 °C to +125 °C. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and a set of peripherals such as timers, communication interfaces, and analog blocks. The PIC16F1709 belongs to the 8-bit PIC® microcontrollers family, which sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductor ICs. Its enhanced mid-range core uses a 14-bit instruction word and a 16-level hardware stack, providing deterministic interrupt response and low active current. Key features include two on-chip operational amplifiers, a 10-bit ADC with up to 12 channels, a 5-bit/10-bit DAC, two 8-bit timers and one 16-bit timer, enhanced PWM with four outputs, and Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS). These features let designers implement sensor conditioning, power-factor correction, lighting control, and signal generation with minimal external components. Typical applications include LED lighting drivers, battery chargers, smart sensors, IoT edge nodes, and consumer appliance control panels. The XLP deep-sleep current of typically < 50 nA with retention enables multi-year coin-cell operation for remote wireless sensor nodes and metering. When designing with this MCU, ensure the ICSP programming header does not interfere with PPS remapped peripherals and leave the ZCD pin floating when unused to avoid spurious triggers. Always confirm that the chosen SSOP footprint is the 5.30 mm body variant. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes that are not available in the manufacturer datasheet alone, giving procurement and design engineers a single reference for evaluation.

見積もり お問い合わせ
PIC16F1709-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip
PIC16F1709-I/ML

PIC16F1709-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip

The Microchip Technology PIC16F1709-I/ML is a 8-bit PIC microcontroller with 14KB Flash program memory, 1024 bytes RAM, and 32MHz internal oscillator in a 20-pin QFN (4x4 mm) package. The device integrates Intelligent Analog peripherals including on-chip op amps, a 10-bit ADC, an 8-bit DAC, high-speed comparator, zero-cross detect, configurable logic cell (CLC), complementary output generator (COG), and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and programmable I/O peripherals. The PIC16 family uses a RISC Harvard architecture with 14-bit instructions and 200 ns instruction execution. Within the broader MCU taxonomy, the PIC16F1709 belongs to the enhanced mid-range PIC16(L)F170X/171X series that emphasizes cost-effective analog integration, sitting between baseline PIC10/12/16F and the higher-pin PIC18/dsPIC families. Key features include eXtreme Low Power (XLP) technology with sub-1 µA sleep currents, 4x 10-bit ADC channels up to 100 ksps, 1x 8-bit DAC, 2x op amps with programmable gain, EUSART, I2C/SPI, two CCP/PWM modules, and 18 I/O pins. PPS allows digital peripheral signals to be remapped onto any of the I/O pins, simplifying board layout and reducing pin conflicts when peripherals are added or removed. The internal 32 MHz oscillator provides 8 MIPS throughput without external components. The Intelligent Analog architecture integrates high-performance analog blocks alongside the digital core, enabling sensor conditioning, signal generation, and closed-loop control without external components. Zero-Cross Detect and the Complementary Output Generator support power-factor-corrected motor and lighting control, while CLCs implement glue logic in hardware without code overhead, offloading the CPU for deterministic real-time response. Typical applications include LED lighting with dimming and color mixing, low-power IoT sensor nodes, small appliance control, battery chargers, DC-DC converter control loops, and general-purpose analog signal conditioning. The wide 1.8 V to 5.5 V operating range and XLP low-power modes suit coin-cell and energy-harvesting designs. Design considerations: enable the watchdog timer and brown-out reset in safety-critical firmware; route PPS-mapped outputs carefully to avoid bus contention. Use the ADC with the internal FVR for absolute voltage references above VDD. Compared with discrete analog designs, on-chip op amps trade absolute precision for BOM reduction and PCB simplicity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not typically consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1709-I/P - 32MHz 8-Bit MCU with ADC | Microchip
PIC16F1709-I/P

PIC16F1709-I/P - 32MHz 8-Bit MCU with ADC | Microchip

The Microchip Technology PIC16F1709-I/P is an 8-bit PIC16 RISC flash microcontroller with a 32 MHz maximum clock, 14 KB of program Flash memory, 1 KB of data RAM, and a 20-pin PDIP package. It integrates a 10-bit ADC, two operational amplifiers, two comparators, two 2-bit PWM modules, five timers, Core Independent Peripherals, and Peripheral Pin Select for compact general-purpose control. A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The PIC16F1709 belongs to the PIC16 family of 8-bit RISC microcontrollers and extends into the broader embedded-control hierarchy of processor, microcontroller, and embedded system. Its XLP design targets low-cost, low-power applications where analog sensing, control output, and event handling are needed without a separate analog subsystem. Key features include 14 KB of Flash memory organized as 8K × 14 words, 1,024 bytes of RAM, and a 200 ns instruction execution cycle. Two integrated operational amplifiers support signal conditioning and closed-loop control, while the 10-bit ADC provides digital conversion for analog sensors. The CLC, COG, and Zero Cross Detect peripherals extend the PIC16 Core Independent Peripheral concept, allowing logic functions to continue independently of the main CPU. The MCU provides two 2-bit PWM modules, five timers, two comparators, a watchdog timer, and Peripheral Pin Select. Peripheral Pin Select allows eligible digital functions to be assigned to different I/O pins, supporting design flexibility across sensor inputs, control outputs, and communication functions. The 20-pin PDIP package also exposes analog and digital resources in a through-hole format that is useful for prototypes, educational systems, and manually assembled industrial controllers. Typical applications include temperature or pressure monitoring, compact motor and valve controllers, LED dimming, power conversion, battery-powered instrumentation, and general-purpose control boards. The integrated analog resources can reduce the component count when a design needs signal amplification, threshold detection, or mixed-signal control close to the MCU. Designers should verify the exact peripheral routing, analog-channel assignment, and pin multiplexing in the manufacturer pin-description table before finalizing a PCB. The -I grade suffix identifies the industrial temperature-grade ordering code, but the numerical operating-temperature limits and specific regulatory qualifications must be confirmed from the manufacturer datasheet. This product overview combines memory capacity, clock speed, analog integration, package details, application guidance, drop-in alternatives, and design considerations to accelerate MCU selection. It also emphasizes practical verification points for firmware, clock configuration, analog calibration, and pin assignment rather than presenting the component as an isolated specification list.

見積もり お問い合わせ
PIC16F1709-I/SO - 8-bit 32MHz 14KB Flash MCU | Microchip
PIC16F1709-I/SO

PIC16F1709-I/SO - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip PIC16F1709-I/SO is an 8-bit PIC16 enhanced mid-range flash microcontroller (MCU) running at up to 32 MHz, with 14 KB of Flash program memory and 1024 bytes of SRAM, housed in a 20-pin SOIC package. The device integrates intelligent analog peripherals including operational amplifiers, a 10-bit ADC, 8-bit DACs, and comparators alongside core-independent peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), Zero Cross Detect, and Peripheral Pin Select. The -I temperature grade covers -40C to +85C operation, and the XLP (eXtreme Low Power) sleep current is in the sub-microamp range, making the part suited for battery-powered sensor and IoT applications. An 8-bit flash microcontroller is a single-chip computer built around an 8-bit data path and on-chip non-volatile program memory. Within the broader taxonomy, PIC16F1709 sits inside Microchip's mid-range PIC16 family, which itself belongs to the 8-bit MCU category, then microcontrollers, then integrated circuits. The mid-range core delivers 200 ns instruction execution at 32 MHz, with a 14-bit instruction word and a hardware stack - the architectural sweet spot for cost-sensitive embedded control that still needs analog integration and deterministic interrupt response. Key features include 1024 bytes of SRAM, 256 bytes of EEPROM, up to 18 I/O pins, a 10-bit ADC with up to 12 channels, two 8-bit DACs, two comparators, and up to two on-chip operational amplifiers. The PIC16F1709 also offers a UART, two SPI/I2C, eight PWM channels, and a 32 MHz internal oscillator that eliminates the need for an external crystal in many designs. Typical applications include LED lighting controllers, sensor conditioning front-ends, battery chargers, small appliance controls, consumer white goods, IoT endpoints, and low-cost general-purpose analog signal conditioning. The on-chip op-amps and DACs make the PIC16F1709 well-suited to analog-front-end designs where a discrete op-amp and an MCU would otherwise consume board space and budget. When designing with this MCU, engineers should note that the on-chip peripherals are mapped via PPS, which simplifies PCB layout but requires the latest MPLAB X configuration. The PIC16F1709 runs from 1.8 V to 5.5 V; for a true low-voltage variant, Microchip offers the PIC16LF1709 with the same die and pinout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1709-I/SS - 8-bit 32MHz MCU 14KB Flash 20-SSOP | Microchip
PIC16F1709-I/SS

PIC16F1709-I/SS - 8-bit 32MHz MCU 14KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16F1709-I/SS is an 8-bit PIC microcontroller built on the enhanced mid-range PIC16 x14 architecture with 32MHz internal oscillator capability, 14KB (8K x 14) of Flash program memory, 1024 bytes of RAM, and 256 bytes of EEPROM, housed in a 20-pin SSOP package. It delivers 200ns instruction execution, up to 49 GPIO-capable I/O lines, and integrates intelligent analog peripherals including operational amplifiers, 10-bit ADC with computation, 8-bit DAC, and comparators. An 8-bit microcontroller (MCU) is a single-chip computer based on a byte-wide data path. The PIC16F1709 belongs to the PIC16 family from Microchip, sits within the enhanced mid-range XLP (eXtreme Low Power) line, and forms part of the broader PIC microcontroller hierarchy (PIC10/12/14/16/18/24/32). It is classified as a Flash-based CMOS RISC microcontroller IC designed for general-purpose embedded control. Key features include XLP technology for sub-microamp sleep currents, on-chip op amps, Core Independent Peripherals (CLC, COG/NCO, Zero Cross Detect), Peripheral Pin Select (PPS) for flexible signal routing, and an integrated 32MHz internal oscillator that eliminates the need for an external crystal in many applications. The device operates from 1.8V to 5.5V. The PIC16F1709 uses a Harvard RISC architecture with a 14-bit instruction word. Hardware multipliers are not present, but the enhanced instruction set supports C-friendly development with the XC8 compiler. PPS allows digital peripheral pins to be remapped, simplifying PCB layout and reducing GPIO conflicts. Typical applications include LED lighting control, sensor signal conditioning using the on-chip op amps, battery-powered IoT sensor nodes leveraging XLP sleep modes, consumer appliance control, and low-cost motor control (PWM via COG/NCO). The on-chip 10-bit ADC with computation enables touch-style and averaging applications without CPU overhead. When designing with this part, evaluate current consumption at the chosen sleep mode: XLP sleep draws ~50 nA typical. Provide a stable VDDCORE decoupling network of 0.1uF and 1uF in parallel, and reserve the MCLR pin configuration if in-circuit serial programming is required. This page synthesizes distributor pricing, drop-in PIC16F1709 family alternatives in the same SSOP-20 footprint, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1709T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip
PIC16F1709T-I/SO

PIC16F1709T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip Technology PIC16F1709T-I/SO is an 8-bit PIC16 enhanced mid-range microcontroller delivering 14KB of Flash, 1024 bytes of SRAM, and 32MHz CPU performance in a 20-pin SOIC (0.295 inch / 7.50 mm width) package. The "T" suffix indicates Tape and Reel packaging, the "I" indicates the industrial -40C to +85C operating temperature range, and "/SO" identifies the SOIC-20 footprint. According to the Microchip PIC16F1709 product page, the device integrates Intelligent Analog peripherals including on-chip Op Amps, an 8-bit DAC, a 10-bit ADC with hardware Capacitive Voltage Divider (CVD), and Core Independent Peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero-Cross Detect (ZCD), all wrapped in the XLP (eXtreme Low Power) platform. An 8-bit PIC microcontroller is a single-chip computer based on Microchip's RISC (Reduced Instruction Set Computer) architecture, typically executing one instruction per clock cycle (200 ns at 20 MHz, 125 ns at 32 MHz) from a unified Flash program store. PIC microcontrollers occupy a distinct layer in the embedded hierarchy: microcontroller -> 8-bit MCU -> mid-range MCU -> PIC16 family, balancing deterministic real-time behavior, low active and sleep currents, and rich peripheral integration. The PIC16F1709T-I/SO supports Peripheral Pin Select (PPS) for flexible signal routing, EUSART, MSSP (SPI/I2C), and up to 18 I/O pins, making it a strong fit for cost-sensitive mixed-signal embedded designs. Key differentiating features of this part include the XLP sleep current in the order of tens of nanoamps, four 10-bit PWM outputs with COG complementary dead-band control, two on-chip operational amplifiers for analog front-end conditioning, and a fast 10-bit ADC with up to 30 analog channels (package dependent). The 8-bit DAC with selectable reference, combined with the op-amp outputs, enables closed-loop analog control without external components. Together, these peripherals create a "single-chip mixed-signal MCU" value proposition unavailable in plain PIC16F1xxx predecessors. Typical applications include LED lighting controllers using COG + PWM, capacitive touch and proximity sensing via the CVD ADC technique, low-power battery-powered sensors, BLDC and stepper motor commutation, and switched-mode power supply control loops. The PPS feature allows PCB layout changes without silicon respin, which is particularly valuable for mixed-signal designs where analog and digital pin assignments shift late in the design cycle. When designing with this MCU, ensure the configuration words match the intended oscillator (internal HFINTOSC up to 32 MHz, external crystal, or PLL), and validate low-power sleep current in the application rather than relying on the headline nanoamp specification alone, because real-world consumption depends on enabled peripherals and wake-up sources.

見積もり お問い合わせ
PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip
PIC16F1709T-I/SS

PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709T-I/SS is an 8-bit PIC16F microcontroller featuring 14KB Flash, 1KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP package with tape-and-reel packaging. The 'T' suffix in the part number designates the tape-and-reel packaging option, while the 'I' indicates the industrial operating temperature range of -40C to +85C. The device belongs to Microchip's XLP (eXtreme Low Power) product family and integrates intelligent analog peripherals including operational amplifiers, a 10-bit ADC, an 8-bit DAC, high-speed comparators, zero-cross detect, and configurable logic cells (CLC). An 8-bit microcontroller (MCU) is a small computer-on-chip that integrates a CPU, memory, and peripherals around an 8-bit data bus. The PIC16F1709 sits in Microchip's mid-range MCU hierarchy (8-bit PIC -> PIC16 family -> enhanced mid-range x14 architecture) and combines RISC processing with on-chip intelligent analog to suit a wide variety of general-purpose applications. Its 200ns instruction execution enables responsive control loops while keeping power consumption low, making it suitable for battery-powered and energy-harvesting designs. Key features include Core Independent Peripherals (CLC, COG, Zero Cross Detect), Peripheral Pin Select (PPS) for flexible signal routing, EUSART, I2C, SPI communication interfaces, and on-chip op amps that eliminate external analog components. The integrated 10-bit ADC and 8-bit DAC support sensor conditioning and signal generation without external converters. The device operates from 2.3V to 5.5V across the industrial temperature range, with XLP technology delivering sleep currents in the microamp range. Typical applications include LED lighting control with COG-driven power-factor correction, consumer appliance user interfaces, IoT sensor nodes, battery-powered instrumentation, and low-cost motor control. The combination of intelligent analog and CIPs allows designers to offload timing-critical tasks from the CPU, reducing firmware complexity and improving system reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

見積もり お問い合わせ
PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip
PIC16F1713-E/MV

PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip

The Microchip Technology PIC16F1713-E/MV is an 8-bit PIC microcontroller featuring 7KB Flash program memory, 512B RAM, and 32MHz operation in a 28-pin UQFN (4x4 mm) package with extended (-40C to +125C) operating range. The device integrates high-speed comparators, 10-bit ADC, on-chip operational amplifiers, 5/8-bit DAC, CCP/PWM, CLC, COG, NCO, ZCD, and Peripheral Pin Select for maximum design flexibility. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals. The PIC16F1713 belongs to Microchip's PIC16 enhanced mid-range family, optimized for general-purpose and intelligent analog applications. The 'XLP' (eXtreme Low Power) designation indicates power-saving modes that extend battery life, making this MCU well suited to portable and energy-harvesting designs. As an 8-bit RISC MCU, the PIC16F1713 executes single-cycle instructions, balancing code density with deterministic timing. Key features include 14-bit instruction word, 32MHz internal oscillator, two operational amplifiers, four 10-bit ADC channels with computation, and core-independent peripherals that offload tasks from the CPU. The Zero Cross Detect (ZCD) and Numerically Controlled Oscillator (NCO) modules support advanced signal conditioning in motor control and lighting applications without software intervention. The architecture combines intelligent analog integration with low-power operation. On-chip op-amps can drive ADC inputs, implement active filters, or buffer sensor signals. The Configurable Logic Cell (CLC) and Complementary Output Generator (COG) enable custom hardware logic functions, reducing BOM cost by replacing discrete components. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB layout. Typical applications include LED lighting control, sensor signal conditioning, battery-powered IoT nodes, motor control, and consumer appliances. The AEC-Q100 qualified grade supports automotive applications such as body electronics and interior lighting. The compact 4x4 mm UQFN package suits space-constrained designs. Design consideration: When using the internal 32MHz oscillator at full speed, ensure core-independent peripherals are configured to minimize wake events. For battery-powered designs, leverage the nanoWatt XLP sleep modes to reduce current consumption below 1 uA. This page synthesizes distributor pricing, drop-in package equivalents, and practical design considerations not collected in any single manufacturer document.

見積もり お問い合わせ
PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip
PIC16F1713-E/SO

PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F1713-E/SO is an 8-bit RISC microcontroller in the PIC16F family, featuring a 32MHz core, 7KB Flash program memory, 512 bytes RAM, and 28-pin SOIC wide-body packaging. It integrates on-chip op-amps, a 10-bit ADC with computation, Core Independent Peripherals (CLC, NCO, COG, Zero Cross Detect), and Peripheral Pin Select for flexible signal routing. The -E suffix denotes the extended industrial temperature grade (-40C to +125C). A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a set of integrated peripherals such as ADCs, timers, communication interfaces, and I/O. Microcontrollers sit at the top of the embedded control hierarchy: sensor input -> MCU -> actuator output, and are classified by bit-width (8-bit, 16-bit, 32-bit), architecture (von Neumann, Harvard), and instruction set (RISC, CISC). The PIC16F family belongs to the 8-bit RISC segment, optimized for cost-sensitive, low-power, deterministic control applications where predictable interrupt latency and small code footprint matter more than raw throughput. Key features of the PIC16F1713 include eXtreme Low Power (XLP) technology with sub-uA sleep currents, a high-speed comparator with 10-bit reference DAC, two operational amplifiers, up to 17 channels of 10-bit ADC, four 16-bit timers, two USART, one I2C, and one SPI peripheral. The 32MHz internal oscillator delivers 8 MIPS performance, while the 49 instruction set ensures tight C-code efficiency. The device operates from 2.3V to 5.5V with multiple power-managed modes. The architecture uses a 14-bit instruction word with a two-stage pipeline, modified Harvard memory organization separating program and data buses, and a priority-based interrupt controller. The integrated op-amps and 10-bit ADC reduce BOM cost in sensor-interface designs by eliminating external analog front-end stages. The CLC (Configurable Logic Cell) allows Boolean combinations of peripheral events without CPU intervention, enabling ultra-low-latency hardware responses. Typical applications include IoT sensor nodes, industrial sensor signal conditioning, battery-powered remote controls, HVAC thermostat controls, LED lighting drivers, and consumer appliance user interfaces. The combination of op-amps, ADC, and Core Independent Peripherals suits mixed-signal designs where analog and digital processing coexist on a single die. When designing with the PIC16F1713-E/SO, reserve sufficient decoupling (100nF plus 10uF bulk) within 5mm of the VDD pins, and follow Microchip AN588 for PCB layout of SOIC wide-body packages. For EMI-sensitive applications, route the 32MHz clock trace short and guard the analog AVSS/AVDD pair. This page synthesizes distributor pricing, verified drop-in same-package alternatives from Microchip's 28-pin PIC16F family, and practical design notes not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip
PIC16F1713-E/SS

PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

The Microchip PIC16F1713-E/SS is an 8-bit PIC microcontroller with 7KB Flash program memory, 512 bytes RAM, and 32 MHz CPU speed, housed in a 28-pin SSOP (5.30 mm width) package. It integrates on-chip op-amps, a 10-bit ADC, 5/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, ZCD), and Peripheral Pin Select (PPS) for maximum design flexibility. The 'E' suffix denotes the -40C to +125C extended operating temperature range, and the '/SS' suffix denotes the 28-pin SSOP package. An 8-bit microcontroller is a microprocessor whose data bus, registers, and ALU operate on 8 bits at a time. Within the broader taxonomy, the PIC16F1713 belongs to Microchip's PIC16 mid-range MCU family, which sits between the smaller PIC10/12 baseline family and the higher-performance PIC18 family. Microcontrollers of this class integrate CPU, Flash program memory, RAM, ADC/DAC, timers, and communication peripherals on a single die, replacing many discrete components in embedded designs. Key features include 4 KB (7 KB total, with 4K x 14 word addressing) of Flash memory, hardware op-amps for signal conditioning, 10-bit ADC with computation, high-speed comparators, PWM/CCP, and multiple communication interfaces including EUSART, I2C, and SPI. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents for battery-powered applications. The 28-SSOP package measures 0.209 inches (5.30 mm) in body width. The PIC16F1713 uses a Harvard architecture RISC core with a 14-bit instruction word, enabling compact code density. Its on-chip op-amps allow analog front-end design without external amplifiers, while the CLC, COG, NCO, and ZCD peripherals implement state machines and waveform generation without CPU intervention, reducing firmware complexity and improving determinism. Typical applications include sensor signal conditioning with on-chip op-amps, LED driving with hardware PWM, motor control using the Complementary Output Generator (COG), low-power IoT battery nodes, and industrial control with Core Independent Peripherals. The PPS feature allows peripheral I/O mapping to nearly any pin, simplifying PCB routing. When selecting this part, note the extended temperature grade ('-E') suits industrial and automotive under-hood environments. For -40C to +85C commercial-industrial grade, consider the '-I' variant; for the smaller 28-QFN package, look at PIC16F1713-E/ML or PIC16F1713-E/MV. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip
PIC16F1713-I/SO

PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F1713-I/SO is an 8-bit enhanced mid-range PIC16 microcontroller built on the nanoWatt XLP extreme-low-power technology platform, delivering 32 MHz CPU performance with 7 KB (4K x 14 words) of Flash program memory in a 28-pin SOIC package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals. PIC16F1xxx family parts sit in the enhanced mid-range tier of Microchip's 8-bit portfolio, sitting hierarchically between baseline PIC10/12/16 and advanced PIC18/dsPIC, making them suitable for cost-sensitive, low-power embedded designs. The "F" denotes Flash program memory allowing in-circuit re-programmability, while the "XLP" branding indicates nanoWatt technology optimized for battery-powered applications. Key differentiating features of the PIC16F1713 include integrated op-amps, a 10-bit ADC with computation, two 8-bit and one 10-bit DAC, two comparators, Core Independent Peripherals (CLC, COG, NCO, Zero-Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The device offers 512 bytes RAM, 128 bytes EEPROM, and runs from 2.3V to 5.5V with typical active current under 1 mA at 32 MHz and sleep currents in the nanoamp range. Industrial temperature grade covers -40C to +85C. Architecturally, the PIC16F1713 uses a Harvard RISC core with a 200 ns instruction cycle, separate program and data buses, and a deep 14-bit instruction word. PPS remaps digital peripherals to virtually any I/O pin, simplifying PCB layout. The op-amps can be paired with the 10-bit ADC to form closed-loop signal conditioning without external analog ICs, while CLC blocks allow logic functions to be implemented in hardware, offloading the CPU. Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting control, small appliance motor control, and industrial sensor interfaces. The XLP current profile makes the part well-suited for energy-harvesting and remote-control products where standby time dominates the operating budget. When designing with the PIC16F1713, place a 0.1 uF decoupling capacitor within 5 mm of VDD and reserve the ICSP/ICD pins (RB6/RB7 on most pinouts) for debug headers during prototyping. Verify the PPS assignments in code rather than assuming default mappings, as PPS is the most common source of "no signal" debug confusion. This page synthesizes distributor pricing snapshots, drop-in PIC16F17xx family alternatives, and practical analog-mixing design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip
PIC16F1713-I/SP

PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC16F1713-I/SP is an 8-bit enhanced mid-range CMOS flash microcontroller built on the PIC® RISC architecture, delivering 32MHz operation with 200ns instruction execution in a 28-pin SPDIP (SP) through-hole package. The device integrates 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and on-chip op amps, making it a self-contained analog-plus-logic solution for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals onto one die. Within the broader taxonomy, the PIC16F1713 belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. The "enhanced mid-range" PIC16 family uses a 14-bit instruction word that balances code density with peripheral richness, fitting between the baseline PIC10/12/16 and the 16-bit PIC24/dsPIC lines. Key features include 17-channel 10-bit ADC, two on-chip operational amplifiers with 3MHz gain-bandwidth, two high-speed comparators, a 16-bit Numerically Controlled Oscillator (NCO), Core Independent Peripherals (CLC, COG, Zero-Cross Detect), and Peripheral Pin Select for flexible signal routing. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents below 50nA typical, with active current around 1.6mA at 32MHz. The PIC16F1713 employs a Harvard architecture with separate program and data buses, a hardware stack, and 49 instruction set variants. Hardware multiplier support is absent, but bit-oriented operations, indexed addressing, and single-cycle branching simplify firmware. The device operates from 1.8V to 5.5V across the industrial -40C to +85C temperature range. Typical applications include consumer appliance control, low-cost sensor conditioning with on-chip op amps, LED lighting with COG peripheral, battery-powered IoT edge nodes benefiting from XLP sleep, HVAC thermostat signal chains, and general-purpose replacement of discrete analog + MCU boards. The combination of analog and digital on one die reduces BOM cost and PCB area in space-constrained products. When designing with this device, ensure MPLAB X IDE and XC8 compiler compatibility, and budget Flash endurance at 10,000 erase/write cycles minimum for field-upgradable firmware. The 28-SPDIP package suits through-hole prototyping, hand-rework, and educational labs; for high-volume surface-mount, use the SOIC-28 variant PIC16F1713-I/SO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating PIC16F1713-I/SP versus PIC16F1716, PIC16F1709, or PIC16F1615 families will find the comparison_table and design_notes sections useful for fast BOM decisions.

見積もり お問い合わせ
PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F1713T-I/ML

PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip PIC16F1713T-I/ML is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family that integrates 7KB (4K x 14) of Flash program memory, 32 MHz maximum CPU speed, and a rich set of on-chip intelligent analog peripherals in a 28-pin 6x6 mm QFN package with exposed thermal pad. It is engineered to combine extreme low power (XLP) operation with high analog integration, targeting general-purpose applications that demand flexible mixed-signal performance in a compact footprint. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (typically Flash), data memory (SRAM), non-volatile EEPROM, and a suite of on-chip peripherals such as timers, ADC, communication interfaces, and I/O. PIC microcontrollers from Microchip use a RISC-based 8-bit core with a 14-bit instruction word, classified within the 8-bit MCU segment of the broader microcontroller > embedded controller > semiconductor taxonomy. The PIC16F1713 belongs to the mid-range PIC16 enhanced family, bridging the gap between baseline PIC10/12/16 and the higher-performance PIC18/dsPIC families. Key features include on-chip operational amplifiers (Op Amps), Core Independent Peripherals (CLC, COG, NCO and Zero Cross Detect), Peripheral Pin Select (PPS), a 10-bit ADC with computation, 8-bit DAC, comparators, and PWM/Signal Measurement Timers. The XLP technology delivers nanoWatt deep-sleep currents suitable for battery-powered sensor nodes and IoT edge devices. Memory-mapped peripherals and PPS enable flexible routing of digital functions to physical pins without rewiring the PCB. Architecturally, the PIC16F1713 uses Microchip's enhanced mid-range core with a 14-bit instruction set, hardware multiplier, and 16-level stack. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly, while the 'I' grade specifies the industrial temperature range (-40 °C to +85 °C). The 28-QFN package exposes the die ground pad to improve thermal dissipation and electrical grounding for noise-sensitive analog designs. Typical applications include sensor signal conditioning with on-chip op-amps, LED lighting control using COG and PWM, low-power IoT battery nodes, motor control signal generation, and general-purpose mixed-signal embedded systems. Designers favor this part when the on-chip analog integration eliminates external components and reduces BOM cost. When designing, place decoupling capacitors within 2 mm of each VDD pin and provide a low-impedance ground pour under the exposed pad. PPS reassignment must respect the peripheral-to-pin mapping table in the datasheet; consult Microchip MPLAB X IDE Configurator Code for the supported mappings. This page synthesizes distributor pricing, drop-in alternatives across the PIC16F171x family, and practical design notes compiled from the manufacturer datasheet and verified distributor data not aggregated on any single vendor page.

見積もり お問い合わせ