マイクロコントローラ

製品 (20,000+)

PIC16F886-E/SP - 8-Bit 20MHz MCU 14KB Flash 28-SPDIP | Microchip
PIC16F886-E/SP

PIC16F886-E/SP - 8-Bit 20MHz MCU 14KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC16F886-E/SP is an 8-bit CMOS FLASH-based mid-range PIC microcontroller running at 20 MHz, with 14KB (8K x 14) of program memory, 368 bytes of SRAM, and 256 bytes of EEPROM, housed in a 28-pin SPDIP (SP) through-hole package. It executes instructions in 200 ns with only 35 single-word instructions, supports self-programming, and integrates a 10-bit ADC with 11 channels, two comparators, enhanced Capture/Compare/PWM (ECCP), and an in-circuit debugger (ICD) interface. A PIC microcontroller (Programmable Interrupt Controller, in Microchip's terminology Peripheral Interface Controller) is a compact single-chip computer that integrates a CPU core, non-volatile program memory, RAM, and a rich set of peripherals. The PIC16F886 belongs to the mid-range PIC16 family, which is a balance between cost and capability, sitting between the baseline PIC10/12/16 families and the high-performance PIC18 families. Mid-range PIC16 MCUs are widely used in consumer, industrial, and hobbyist applications for embedded control, sensor interfacing, and user I/O. Key features include 25 digital I/O pins, an internal 8 MHz oscillator, USART, SPI, I2C (MSSP), 14 KB self-programmable Flash, nanoWatt power management with multiple sleep modes, and an operating voltage range of 2.0V to 5.5V. The "-E" suffix indicates the extended industrial temperature grade (-40C to +125C), distinguishing it from the "-I" (industrial, -40C to +85C) variant. The PIC16F886 uses Microchip's RISC Harvard-architecture core with separate program and data buses, allowing instruction fetch and operand access in a single cycle. The 14-bit instruction word and 8-bit data path are characteristic of the mid-range PIC16 series, offering code density that is competitive with 8-bit AVR parts while being widely supported by the MPLAB X IDE and XC8 toolchain. Typical applications include consumer electronics user interfaces, small appliances, motor control front-ends, sensor conditioning nodes, and battery-powered industrial sensors. The 28-pin SPDIP footprint remains popular for through-hole prototypes, hobby projects, and educational kits because it fits standard 0.3-inch wide DIP sockets and breadboards. When designing with this device, ensure your programmer/debugger supports the PIC16F886 (e.g., PICkit 3, PICkit 4, ICD 3, or MPLAB Snap). For new designs, evaluate whether the -I (industrial) or -E (extended) temperature grade matches your thermal environment, and budget for a decoupling capacitor pair (100 nF + 10 uF) close to VDD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F886-E/SS - 8-Bit 20MHz MCU, 14KB Flash 28-SSOP | Microchip
PIC16F886-E/SS

PIC16F886-E/SS - 8-Bit 20MHz MCU, 14KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16F886-E/SS is an 8-bit PIC16F-series CMOS flash microcontroller featuring a 20 MHz CPU, 14 KB (8K x 14) of program Flash, 368 bytes of SRAM and 256 bytes of EEPROM data memory, packaged in a 28-pin SSOP (5.30 mm width). It integrates 25 digital I/O pins, an enhanced 11-channel 10-bit ADC, two analog comparators, enhanced Capture/Compare/PWM (ECCP) modules, USART, MSSP (SPI/I2C), and nanoWatt power management for low-power operation. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path CPU, on-chip program memory, data RAM, non-volatile EEPROM, and a mix of analog/digital peripherals. PIC16F microcontrollers sit within Microchip's mid-range 8-bit MCU family (PIC10/12/14/16/18), which belongs to the broader category of microcontrollers (MCUs) and ultimately embedded controllers in the semiconductor product taxonomy. They use a RISC-style Harvard architecture with 35 single-word instructions and a 200 ns instruction cycle at 20 MHz, optimized for deterministic, low-cost control tasks. Key differentiating features of the PIC16F886 include nanoWatt technology for ultra-low-power sleep modes (down to ~50 nA typical), self-programming support for in-field firmware updates, an ICD (In-Circuit Debugger) interface, an integrated 8 MHz internal oscillator, and wide 2.0 V to 5.5 V operating voltage with automotive AEC-Q100 qualification. The enhanced 14-bit ADC and ECCP module provide finer PWM resolution than the legacy PIC16F87x family. Technically, the PIC16F886 uses a 14-bit instruction word with separate program and data buses (Harvard architecture). Two 8-bit Timer0/Timer2 plus one 16-bit Timer1 supply flexible timing; the ECCP module adds programmable dead-band delay, auto-shutdown and steering for full-bridge motor or power-converter control. The nanoWatt core offers multiple idle/sleep modes with selective peripheral clock gating, enabling battery-powered designs where average current falls below 1 microamp. Typical applications include industrial control panels, automotive sensor modules (AEC-Q100 grade), low-power remote sensor nodes, consumer appliance controllers, and small motor/lighting PWM drivers. The 14 KB flash comfortably hosts state-machine plus protocol stacks such as LIN-slave or Modbus RTU. When designing with the PIC16F886-E/SS, place decoupling capacitors (100 nF plus 10 uF bulk) within 5 mm of VDD/VSS pins, route MCLR through the recommended 10 kohm pull-up with a 100 nF capacitor to ground, and observe SSOP thermal limits (theta_JA ~ 95 C/W) when driving continuous loads on multiple I/Os. This page synthesizes XAIPART distributor pricing, drop-in PIC16 family alternatives, application notes, and practical design considerations that complement the manufacturer datasheet.

見積もり お問い合わせ
PIC16F886-I/ML - 8-bit MCU, 14KB Flash, 20MHz, 28-QFN | Microchip
PIC16F886-I/ML

PIC16F886-I/ML - 8-bit MCU, 14KB Flash, 20MHz, 28-QFN | Microchip

The Microchip Technology PIC16F886-I/ML is an 8-bit CMOS Flash-based microcontroller in the PIC16 family, featuring 14KB of Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM, housed in a 28-pin QFN (6x6 mm) package. It operates at up to 20MHz instruction rate, supports 25 digital I/O pins, and integrates 11 channels of 10-bit ADC, two analog comparators, one CCP and one ECCP module, plus USART, MSSP (SPI/I2C), and an ICD (In-Circuit Debugger) interface. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, program memory, data RAM, and peripheral interfaces on a single die. The PIC16F family sits within the broader hierarchy of PIC microcontrollers -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Unlike 16-bit or 32-bit MCUs, 8-bit parts optimize for cost, deterministic behavior, and ease of programming rather than raw arithmetic throughput, making them ideal for control loops, sensor reading, and human-interface tasks in industrial, automotive, and consumer products. The PIC16F886-I/ML uses Microchip's enhanced mid-range 14-bit instruction set with only 35 single-word instructions, allowing most instructions to execute in one instruction cycle. It supports self-programmability, an internal oscillator, nanoWatt power management for sleep modes as low as 50 nA, and a wide 2.0V to 5.5V operating voltage range. The 28-QFN package provides a compact footprint suitable for space-constrained designs while exposing the full 25 I/O pin count. Typical applications include sensor interface boards, LED lighting controllers, small home appliances, automotive body electronics, battery management peripherals, and industrial control modules. The on-chip 10-bit ADC and comparators allow direct connection to analog sensors without external signal-conditioning ICs. When designing with this device, ensure the ICSP programming pins (RB6/RB7) are accessible on the PCB for in-circuit programming and debugging. The internal oscillator is factory calibrated to within 1 percent, but for timing-sensitive UART or PWM applications, a crystal is recommended. This page synthesizes distributor pricing, drop-in PIC16F88x family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F886-I/SS - 14KB Flash 8-bit MCU, 20MHz, SSOP-28 | Microchip
PIC16F886-I/SS

PIC16F886-I/SS - 14KB Flash 8-bit MCU, 20MHz, SSOP-28 | Microchip

The Microchip Technology PIC16F886-I/SS is a powerful yet easy-to-program CMOS FLASH-based 8-bit microcontroller in the PIC16 family, packaged in a 28-pin SSOP (Shrink Small Outline Package) and rated for the industrial temperature range (-40C to +85C). The device delivers 14KB of FLASH program memory (8K x 14 words), 368 bytes of SRAM, and 256 bytes of EEPROM data memory, with a maximum CPU clock of 20 MHz from an internal or external oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often communication interfaces. PIC microcontrollers use a Harvard RISC architecture with only 35 single-word instructions, making them well-suited for embedded control, sensor interfacing, and low-power applications. The PIC16F886 sits in the mid-range PIC16F family between the smaller PIC16F88x and the larger PIC16F9xx devices. Key features include 25 I/O pins, 11 channels of 10-bit Analog-to-Digital (A/D) conversion, 2 comparators, 1 Enhanced Capture/Compare/PWM (ECCP) module, 1 standard CCP module, and nanoWatt power management for low-current operation. The integrated USART, MSSP (SPI/I2C) and 14-bit instruction word enable efficient code density. Self-programming support allows in-field firmware updates without an external programmer. Typical applications include industrial control panels, sensor signal conditioning, motor control with PWM, LED lighting controllers, battery-powered instruments, and consumer white goods. The wide operating voltage range of 2.0V to 5.5V supports both 3.3V and 5V rails. The SSOP-28 footprint also makes board layout straightforward in dense designs. According to the Microchip PIC16F886 datasheet, only 35 single-word instructions are needed to program the device, simplifying firmware development. When designing with this MCU, provide adequate decoupling (100 nF ceramic close to each VDD/VSS pair) and route the MCLR pin through a 10 kohm pull-up for reliable reset. For low-power designs, leverage nanoWatt sleep modes to drop current to microampere levels between active periods. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet to accelerate part selection and PCB bring-up.

見積もり お問い合わせ
PIC16F886T-I/ML - 20MHz 8-Bit MCU 14KB Flash 28-QFN | Microchip
PIC16F886T-I/ML

PIC16F886T-I/ML - 20MHz 8-Bit MCU 14KB Flash 28-QFN | Microchip

The Microchip Technology PIC16F886T-I/ML is a 20 MHz 8-bit PIC® mid-range flash microcontroller with 14 KB (8K x 14) of program Flash, 368 bytes of SRAM and 256 bytes of EEPROM, packaged in a 28-pin QFN (6x6 mm) with an exposed thermal pad. The 'T' suffix denotes Tape & Reel packaging and the 'I' industrial temperature grade covers -40C to +85C operation. According to the PIC16F882/883/884/886/887 datasheet (DS41299), the device integrates a 10-bit ADC, two analog comparators, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), Master I2C and SPI peripherals, plus an Enhanced Capture/Compare PWM (ECCP) module. A PIC® microcontroller (Programmable Interface Controller) is a Harvard-architecture RISC-based 8-bit MCU family from Microchip Technology. The PIC16F886 sits in the PIC16F88x mid-range sub-family, sitting hierarchically between the entry-level PIC10/12/16 baseline parts and the high-performance PIC18/dsPIC families. Its 14-bit instruction word and 35-instruction RISC core deliver deterministic interrupt latency and very low active/standby current draw (microchip's nanoWatt technology), making the family widely used in cost-sensitive embedded designs. Key features of the PIC16F886 include 25 digital I/O pins, an internal 8 MHz and 31 kHz oscillator, in-circuit serial programming (ICSP) and in-circuit debugger (ICD) support, self-programming of Flash, a 10-bit ADC with up to 11 channels, hardware USART/MSSP and a wide 2.0V to 5.5V supply range. The mid-range 14-bit instruction set and nanoWatt sleep modes (typical < 1 uA standby) make it ideal for battery-powered and always-on applications. Typical applications for the PIC16F886T-I/ML include industrial control nodes, sensor signal conditioning, low-cost motor drive (small DC fans and brushed motors via ECCP PWM), LED lighting controllers, automotive body electronics and consumer white-goods user interfaces. Its small 6x6 mm QFN footprint suits space-constrained PCBAs and the exposed thermal pad (EP) lowers theta-JA for higher-power dissipation in sealed enclosures. When designing with this device, observe the absolute maximum VDD of 5.5V and use a 0.1 uF decoupling capacitor within 5 mm of each VDD/VDDIO pin pair. The 28-QFN exposed pad must be soldered to a properly sized copper pour to meet the 41 C/W theta-JA thermal rating. For new designs, prefer the PIC16F886-I/ML (tray) variant for prototype builds, and reserve the T-suffix part for high-volume assembly lines. This page synthesizes current distributor pricing, same-brand drop-in alternatives (PIC16F882T-I/ML, PIC16F883T-I/SS) and cross-brand equivalents sourced from the verified cross-reference search, plus practical design notes that go beyond the manufacturer datasheet.

見積もり お問い合わせ
PIC16F886T-I/SO - 20MHz 8-Bit 14KB Flash MCU | Microchip
PIC16F886T-I/SO

PIC16F886T-I/SO - 20MHz 8-Bit 14KB Flash MCU | Microchip

The Microchip Technology PIC16F886T-I/SO is a 28-pin, 8-bit CMOS flash-based microcontroller from the PIC16 mid-range family, delivering 20 MHz (200 ns instruction cycle) performance with 14 KB of self-programmable Flash program memory and 256 bytes of EEPROM data memory. The "T" suffix denotes tape-and-reel packaging, "I" denotes the industrial -40C to +85C temperature grade, and "SO" indicates the 28-pin SOIC wide-body package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and integrated peripherals such as ADC, timers, comparators, and communication interfaces. Within the broader category hierarchy, the PIC16F886 belongs to: microcontroller -> embedded MCU -> 8-bit MCU -> RISC MCU -> CMOS flash MCU -> PIC16 mid-range family -> semiconductor IC. The 14 KB flash and 256-byte EEPROM provide sufficient headroom for embedded control firmware, while the integrated 10-bit ADC, two comparators, and capture/compare/PWM modules eliminate many external components. Key features include 368 bytes of RAM, 11 channels of 10-bit ADC, two analog comparators, one enhanced capture/compare/PWM (ECCP) and one standard CCP, a synchronous serial port configurable as SPI or I2C, and an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART). The nanoWatt technology provides multiple low-power modes (idle, sleep, and alternate oscillator options) for battery-friendly designs. The device operates from 2.0 V to 5.5 V across the industrial temperature range. Architecturally, the PIC16F886 uses Microchip's RISC-style Harvard architecture with 35 single-word instructions, separate program and data buses, and a 14-bit instruction word. The integrated ICD (In-Circuit Debug) interface allows direct in-system programming and debugging using only two pins, reducing tooling cost. Typical applications include consumer white-goods control, industrial sensor nodes, low-end motor and solenoid drivers, lighting controllers, battery chargers, and automotive body-control nodes (non-safety). Compared with 16- and 32-bit alternatives, the PIC16F886 offers lower BOM cost, simpler firmware, and broader tool/library support for cost-sensitive 8-bit designs. When designing with this part, prioritize the 28-pin SOIC wide footprint for hand-solder-friendly prototypes, and budget for adequate decoupling (100 nF on each VDD pin) plus a low-ESR bulk capacitor. Use the ICD pins (RB6/RB7) for in-circuit programming to avoid surface-mount rework when firmware updates are needed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet, helping engineers evaluate fit for cost-sensitive 8-bit control designs.

見積もり お問い合わせ
PIC16F886T-I/SS - 14KB Flash 20MHz 8-bit MCU 28-SSOP | Microchip
PIC16F886T-I/SS

PIC16F886T-I/SS - 14KB Flash 20MHz 8-bit MCU 28-SSOP | Microchip

The Microchip Technology PIC16F886T-I/SS is an 8-bit CMOS flash-based microcontroller in the mid-range PIC16F family, delivering 20 MHz CPU speed with 14 KB (8K x 14) of program Flash, 368 bytes of RAM, and 256 bytes of EEPROM in a 28-pin SSOP package. The 'T' suffix indicates Tape & Reel packaging and the 'I' grade specifies the industrial -40C to +85C operating temperature range, while 'SS' designates the 28-SSOP form factor. The device integrates 11 channels of 10-bit Analog-to-Digital conversion, 2 comparators, 1 capture/compare/PWM module, and a 25-pin I/O count via the Enhanced PIC16 mid-range core with only 35 single-word instructions. What is a mid-range 8-bit flash microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, volatile data memory, peripherals, and I/O on one die. The PIC16F mid-range family uses Microchip's Reduced Instruction Set Computing (RISC) Harvard architecture with separate program and data buses, single-cycle instructions at 20 MHz (200 ns), and nanoWatt power management for low-power operation. Within the broader semiconductor taxonomy, the device sits as: MCU -> 8-bit MCU -> flash MCU -> mid-range PIC16F. Key differentiating features include nanoWatt technology for sleep currents below 1 uA typical, an ICD (In-Circuit Debug) interface for non-intrusive programming, self-programming capability for bootloader-style firmware updates, and a hardware USART for asynchronous serial communication. The 14 KB Flash memory supports at least 10,000 erase/write cycles per Microchip's endurance specifications, while the 256-byte EEPROM provides at least 1,000,000 erase/write cycles for non-volatile parameter storage. The PIC16F886 uses an enhanced Harvard architecture with a 14-bit instruction word, 8-bit data bus, and a pipelined fetch/decode/execute cycle. The device includes a Phase-Locked Loop (PLL) on selectable variants, internal 8 MHz and 31 kHz oscillators, and a programmable brown-out reset. The peripheral set covers timers (Timer0, Timer1, Timer2), MSSP (Master Synchronous Serial Port) for SPI and I2C, an addressable Universal Synchronous/Asynchronous Receiver/Transmitter (USART), and an enhanced CCP module for PWM and capture. Typical applications include industrial control panels, sensor signal conditioning nodes, low-power remote battery-operated sensor transmitters, white-goods and appliance controllers, automotive aftermarket accessories, lighting controls, and consumer peripherals. The combination of 14 KB Flash, 28 pins, and nanoWatt technology makes this part a popular general-purpose MCU for embedded products that need more code space than a PIC16F84 or PIC12F series can provide. When designing with this part, pay close attention to the I/O pin sharing between analog channels, digital peripherals, and ICSP programming pins - misconfiguring analog pins as digital outputs is a common pitfall. The ICD pins are shared with RB6/RB7, so leave those unconstrained in the schematic for in-circuit debugging. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC16F887-E/ML - 8-Bit MCU, 14KB Flash, 20MHz, 44-QFN | Microchip
PIC16F887-E/ML

PIC16F887-E/ML - 8-Bit MCU, 14KB Flash, 20MHz, 44-QFN | Microchip

The Microchip PIC16F887-E/ML is an 8-bit flash-based CMOS microcontroller from the PIC16F family, offering 14KB (8K x 14) of program memory, 368 bytes of SRAM and 256 bytes of EEPROM in a 44-pin QFN (8x8 mm) surface-mount package. It executes instructions at 20MHz, providing 200ns instruction cycle time through Microchip's enhanced mid-range PIC architecture with 35 single-word instructions. The -E suffix denotes the extended industrial temperature grade (-40C to +125C), while /ML identifies the 44-pin QFN package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (flash/ROM), working memory (SRAM), and configurable peripherals onto one die. Within the broader taxonomy, the PIC16F887 sits in the hierarchy: microcontroller -> 8-bit MCU -> PIC mid-range family -> flash-based MCU -> embedded controller. Its enhanced mid-range core adds C-optimized instructions and a hardware 8x8 multiplier while retaining the famously compact 35-instruction set favored for cost-sensitive and timing-deterministic designs. Key features of the PIC16F887 family include 36 digital I/O pins, a 14-channel 10-bit ADC, two comparators, three timers (Timer0/1/2), one Enhanced USART, MSSP for SPI/I2C, a capture/compare/PWM module, nanoWatt power management and ICD/ICSP in-circuit debugging via two pins. The integrated ADC supporting up to 14 analog channels simplifies sensor interface designs. The PIC16F887 architecture delivers deterministic instruction execution with Harvard bus separation between program flash and data SRAM. Internal RC oscillator options (8MHz/32kHz) and PLL support reduce external component count, while the wide 2.0V-5.5V supply range and nanoWatt sleep modes make it suitable for battery-powered and industrial nodes. Typical applications include industrial sensor front-ends, HVAC controllers, appliance control boards, automotive body modules (non-safety), signal conditioning, embedded data acquisition, and home-automation nodes. The 36 I/O count and abundant peripherals address systems that previously required a more expensive 80-pin MCU. A key design consideration is supply decoupling: place a 100nF ceramic between VDD and VSS as close to the pins as possible, plus a bulk 10uF on the input rail. Use Microchip's ICD header pinout for in-circuit debugging without removing the MCU from the board. This page synthesizes distributor pricing, drop-in replacement alternatives and practical design notes - information synthesized by cross-referencing the manufacturer datasheet with real-time distributor inventory that is not aggregated in any single manufacturer document.

見積もり お問い合わせ
PIC16F887-E/P - 8-Bit 20MHz MCU 14KB Flash 40-PDIP | Microchip
PIC16F887-E/P

PIC16F887-E/P - 8-Bit 20MHz MCU 14KB Flash 40-PDIP | Microchip

The Microchip Technology PIC16F887-E/P is a 28/40/44-pin enhanced flash-based 8-bit CMOS microcontroller with nanoWatt technology, delivering up to 20 MHz operation, 14 KB of Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM data memory, all packaged in a 40-pin PDIP (Plastic DIP) through-hole format. It features 36 digital I/O pins, 14-channel 10-bit ADC, two 8-bit and one 16-bit timers, enhanced USART, MSSP (SPI/I2C), and nanoWatt power management for ultra-low sleep current consumption. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control tasks such as reading sensors, driving actuators, and communicating with peripherals via serial protocols. The PIC16F887 belongs to the PIC16F family of mid-range MCUs, sitting in the hierarchy: PIC16F family -> PIC16 series -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. The "16" prefix denotes a 14-bit wide instruction set mid-range core, while the "F" indicates Flash-based (re-programmable) program memory. The PIC16F887 is widely used in legacy designs, education, and industrial control applications where simplicity, low power, and a familiar peripheral set outweigh the need for high-speed 32-bit processing. Key differentiating features include: 14 KB Flash supporting self-programmability (in-circuit serial programming, ICSP), 256-byte internal EEPROM for non-volatile data storage, brown-out reset (BOR) and low-power watchdog timer with dedicated on-chip 31 kHz oscillator, nanoWatt sleep modes drawing under 1 µA, and 10-bit ADC with 14 channels that allows direct interface with analog sensors without external signal conditioning. The device uses Microchip's enhanced mid-range 8-bit RISC architecture with only 35 single-word instructions, simplifying development in assembly or C via MPLAB X IDE and the XC8 compiler. Its nanoWatt technology includes idle, sleep, and ultra-low-power watchdog modes, making it suitable for battery-powered sensors and remote monitoring. Typical applications include industrial control boards, sensor interface modules, hobbyist and educational platforms, low-cost consumer electronics, and home appliance controls. The 40-pin PDIP package suits through-hole prototyping, breadboarding, and legacy replacement scenarios where DIP-based tooling already exists. When designing with this part, note that the "-E" suffix indicates the extended industrial temperature range of -40°C to +125°C. Adequate decoupling (100 nF ceramic per VDD pin plus bulk 10 µF near the MCU) and a 100 nF between VSS and VDD is recommended to suppress switching transients that can cause ADC noise or POR malfunctions. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving buyers and engineers a single citation-ready reference.

見積もり お問い合わせ
PIC16F887-E/PT - 8-Bit 20MHz MCU 14KB Flash 44-TQFP | Microchip
PIC16F887-E/PT

PIC16F887-E/PT - 8-Bit 20MHz MCU 14KB Flash 44-TQFP | Microchip

The Microchip Technology PIC16F887-E/PT is an 8-bit CMOS Flash-based microcontroller from the PIC16F family, operating at up to 20 MHz with 14 KB (8K x 14 words) of Flash program memory, packaged in a 44-pin TQFP (10x10 mm). It integrates 368 bytes of SRAM, 256 bytes of EEPROM, and 36 digital I/O pins, making it a versatile mid-range controller for embedded designs. A microcontroller (MCU) is a single-chip computer that contains a CPU, RAM, non-volatile memory (Flash/EEPROM), and peripherals such as timers, ADC, communication ports, and I/O pins on one integrated die. The PIC16F belongs to the mid-range PIC architecture hierarchy, which spans PIC10/12/14/16/18/24/32 families, where PIC16F sits between baseline (PIC10/12/16) and enhanced mid-range (PIC18) in terms of instruction set capability and peripheral integration. Key features include a 14-channel 10-bit ADC, two analog comparators, one Capture/Compare/PWM (CCP) and one Enhanced CCP module, a USART, MSSP (SPI/I2C), and nanoWatt power management for low-power sleep modes. The E suffix denotes the extended temperature range of -40C to +125C. The PIC16F887 uses a Harvard RISC architecture with only 35 single-word instructions and 200 ns instruction execution at 20 MHz. Self-programmability supports in-application firmware updates, and ICD (In-Circuit Debug) simplifies development with Microchip's MPLAB X IDE and PICkit debuggers. Typical applications include industrial control systems, sensor interface modules, home appliance controllers, automotive body electronics, and consumer device mainboards where a balance of GPIO count, on-chip peripherals, and Flash-based flexibility is required. When designing with the PIC16F887, ensure decoupling capacitors are placed near VDD/AVDD pins and that the MCLR pin is pulled high through a resistor per Microchip guidance. Choose this MCU when you need more GPIO and peripheral channels than a PIC16F84/88 can offer, but do not need the larger memory and instruction set of a PIC18F series part. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical engineering design notes not assembled in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F887-I/ML - 8-bit MCU 14KB Flash 36 I/O QFN-44 | Microchip
PIC16F887-I/ML

PIC16F887-I/ML - 8-bit MCU 14KB Flash 36 I/O QFN-44 | Microchip

The Microchip Technology PIC16F887-I/ML is a powerful yet easy-to-program 8-bit CMOS Flash-based microcontroller (MCU) with 35 single-word instructions and 200 ns instruction execution time, delivered in a 44-pin QFN (Quad Flat No-Lead) package. It integrates 14KB of Flash program memory, 368 bytes of SRAM, 256 bytes of EEPROM data memory, and 36 general-purpose I/O pins, all driven by a 20 MHz internal/external oscillator core built on Microchip's nanoWatt Technology for ultra-low-power operation. An 8-bit MCU is a microprocessor core optimized for embedded control, executing one byte-wide instruction per cycle. Within the broader taxonomy, 8-bit MCUs sit below 32-bit microcontrollers (e.g., ARM Cortex-M) in performance but excel in deterministic real-time behavior, lower cost, lower power, and simpler toolchains - making them dominant in consumer appliances, automotive body electronics, sensor nodes, and industrial control. The PIC16F887 belongs to Microchip's mid-range PIC16 enhanced family, sharing the PIC16 instruction set architecture with later PIC18 and dsPIC siblings. Key features include an integrated 10-bit Analog-to-Digital Converter (ADC) with up to 14 channels, multiple communication peripherals (USART, MSSP for SPI/I2C), two 8-bit and one 16-bit timers, a 14-bit PWM module, and a nanoWatt power-managed sleep mode drawing less than 1 µA. The 256-byte self-programmable EEPROM supports in-application data logging without external storage. Brown-out Reset (BOR), Power-on Reset (POR), and Watchdog Timer (WDT) provide robust field reliability. Architecturally, the PIC16F887 uses a Harvard RISC core with separate program and data buses, enabling most instructions to complete in one instruction cycle. The 14-bit instruction word and 8-bit data path deliver predictable throughput, while the 20 MHz oscillator (5 MIPS performance) is adequate for control loops up to a few hundred kHz. Typical applications include industrial sensor interfaces, home appliance control panels, battery-powered IoT sensor nodes, automotive body controllers, and consumer electronics. The wide operating voltage (2.0-5.5V) supports both 3.3V and 5V designs. When designing with this device, allocate sufficient decoupling (100 nF + 10 µF) near VDD and AVdd pins, and use Microchip's MPLAB X IDE with XC8 compiler for code development. The ICSP programming interface requires dedicated PGx and PGD pins reserved on the PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F887-I/P - 8-Bit 20MHz 14KB Flash MCU 40-PDIP | Microchip
PIC16F887-I/P

PIC16F887-I/P - 8-Bit 20MHz 14KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC16F887-I/P is an 8-bit CMOS FLASH-based microcontroller (MCU) built on Microchip's PIC16 enhanced mid-range core, delivering 20 MHz CPU performance, 14 KB (8K x 14) of program Flash memory, and 368 bytes of RAM, housed in a 40-pin PDIP (DIP-40) through-hole package. According to the Microchip datasheet, the part integrates 256 bytes of EEPROM data memory, 14 channels of 10-bit Analog-to-Digital conversion, two analog comparators, one capture/compare/PWM (CCP) and one Enhanced CCP (ECCP) module, plus a USART, MSSP (SPI/I2C), and a nanoWatt power-managed sleep mode with brown-out reset and on-chip programmable oscillator. A microcontroller (MCU) is a single-chip computer containing a CPU, program and data memory, peripherals, and I/O. Within the broader taxonomy it sits as: PIC16F887 -> PIC16 enhanced mid-range family -> 8-bit PIC microcontroller -> microcontroller -> embedded computing IC -> semiconductor. The PIC16F887 belongs to the PIC16F882/883/884/886/887 pin-compatible family and is the direct FLASH-based successor to the legacy PIC16F877A, sharing the same 40-pin DIP footprint for drop-in upgrades of older designs. Key features include self-programmability, in-circuit debugger (ICD) support, 35 single-word instructions, an operating voltage range of 2.0 V to 5.5 V, and a nanoWatt power-managed sleep mode that draws microamp-level current for battery-aware designs. The 10-bit ADC with 14 input channels supports sensor and instrumentation sampling directly, while the ECCP module plus USART simplify motor control and serial communication. Twenty-five MHz maximum internal oscillator operation allows cost-effective designs without external crystals. The PIC16F887 uses a Harvard RISC architecture with a 14-bit instruction word and 8-bit data path. A 2-stage pipeline overlaps fetch and execute to sustain single-cycle instruction throughput at 20 MHz (50 ns instruction cycle), which is sufficient for control loops, slow communication stacks, and human-machine interface tasks. The device supports in-circuit serial programming (ICSP) and In-Circuit Debugger (ICD) via two pins, allowing firmware updates and breakpoints without removing the MCU from the board. The 36 general-purpose I/O pins drive most LED, key, and small-relay loads directly. Typical applications include industrial control panels, HVAC thermostat controllers, sensor interface boards, low-cost data loggers, and consumer appliance controls. Compared with 32-bit ARM Cortex-M0+ alternatives, the PIC16F887 trades raw throughput for deterministic 8-bit behavior, simpler toolchain (MPLAB X + XC8), and a wide installed base of legacy code. The 40-pin PDIP package is also favored for educational and breadboard prototyping because of its socket-friendly through-hole leads. When designing with this part, place a 100 nF decoupling capacitor close to VDD and a bulk capacitor on the analog AVCC rail. Use the internal oscillator to reduce BOM when frequency tolerance of +/-2% is acceptable; switch to an external crystal when UART baud-rate accuracy is critical. The -I suffix denotes the industrial temperature grade (-40C to +85C) suitable for most indoor industrial environments. This page synthesizes distributor pricing, drop-in same-package alternatives (including PIC16F884, PIC16F886, PIC18F family migration paths), and practical 40-pin PDIP design notes not consolidated on a single manufacturer datasheet page.

見積もり お問い合わせ
PIC16F887-I/PT - 8-bit 20MHz MCU, 14KB Flash, 44-TQFP | Microchip
PIC16F887-I/PT

PIC16F887-I/PT - 8-bit 20MHz MCU, 14KB Flash, 44-TQFP | Microchip

The Microchip PIC16F887-I/PT is an 8-bit CMOS Flash-based PIC16 family microcontroller running at up to 20 MHz, with 14 KB of Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM, packaged in a 44-pin TQFP (PT) measuring 10x10 mm. The part carries 36 digital I/O lines, supports 14 channels of 10-bit ADC, and integrates nanoWatt power management for low-power designs. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory, data memory, and peripherals on one die; the PIC16 family uses a RISC architecture with only 35 single-word instructions, sitting in the broader hierarchy: MCU -> 8-bit MCU -> PIC16 family -> Flash-based PIC16F -> general-purpose embedded controller -> semiconductor. The PIC16F887 specifically targets the upper-mid range of the PIC16F line, balancing I/O count, analog peripherals, and code density for cost-sensitive embedded products. Key features include 14 KB (8K x 14) self-programmable Flash, hardware USART, MSSP for SPI and I2C, two 8-bit and one 16-bit timers, a 10-bit ADC with 14 channels, an enhanced PWM module with up to three outputs, and the nanoWatt power-managed modes (Idle, Sleep, and a watchdog timer-driven Wake-up). Brown-out Reset, power-on Reset, and a Watchdog Timer with its own on-chip RC oscillator are standard. The PT suffix denotes the 44-lead TQFP (10x10 mm) industrial temperature grade (-40C to +85C). The core is a 14-bit instruction-word RISC engine with an 8-bit data path, supported by a 2-stage pipeline and an 8-level deep hardware stack. The 20 MHz oscillator yields a 200 ns instruction cycle, and an internal 31 kHz and 8 MHz oscillator block can be software-selected to eliminate external crystals in many designs. Debug is supported via Microchip's ICD and ICSP interfaces, with two debug breakpoints integrated on-chip. Typical applications include industrial control panels, home appliance user interfaces, motor driver logic, low-end sensor hubs, automotive body electronics (non-safety), consumer white goods, and battery-powered instruments. The wide operating voltage (2.0 V to 5.5 V) and low-power nanoWatt modes make it well suited to 2-cell battery or USB-powered nodes. When designing with the PIC16F887-I/PT, reserve pins 1 and 44 for the ICSP programming/debug interface so that in-circuit programming is preserved on the production PCB, and always include a decoupling 100 nF capacitor on VDD within 5 mm of the package pin pair. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC16F family, and practical design notes drawn from the manufacturer datasheet - giving engineers more decision-ready information than the standalone datasheet PDF.

見積もり お問い合わせ
PIC16F887T-I/ML - 8-Bit MCU, 14KB Flash, 20MHz, 44-QFN | Microchip
PIC16F887T-I/ML

PIC16F887T-I/ML - 8-Bit MCU, 14KB Flash, 20MHz, 44-QFN | Microchip

The Microchip Technology PIC16F887T-I/ML is a PIC16 family 8-bit RISC microcontroller (MCU) featuring 14KB Flash program memory, 368 bytes SRAM, 256 bytes EEPROM, and a 20 MHz maximum operating frequency, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), non-volatile data memory (EEPROM), and a rich set of peripherals (timers, ADC, communication ports, I/O) on one die. Within the embedded hierarchy, the PIC16F887 belongs to the 8-bit MCU family -> mid-range PIC architecture -> RISC MCU -> microcontroller -> semiconductor IC. The "F" in PIC16F887 indicates Flash program memory and "887" identifies it as the largest-memory variant of the PIC16F88x series. The "T" suffix indicates Tape and Reel packaging, "I" denotes the industrial -40C to +85C operating temperature range, and "ML" indicates the 44-pin QFN package. Key features include 35 digital I/O pins, 14 channels of 10-bit ADC, two analog comparators, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), Master Synchronous Serial Port (MSSP) supporting SPI and I2C, three timers (Timer0/Timer1/Timer2), nanoWatt power-management technology, and on-chip In-Circuit Debug (ICD). The nanoWatt technology provides multiple power-saving modes that reduce active current to ~11 mA at 4 MHz, idle current to ~3.4 mA, and sleep current as low as 50 nA. The PIC16F887 is built on Microchip's enhanced mid-range 8-bit RISC core with 35 single-word instructions and a 14-bit instruction word. It executes instructions in 200 ns at 20 MHz (5 MIPS peak). Self-programmability supports field firmware updates, and the device operates from 2.0V to 5.5V across the full industrial temperature range. Typical applications include industrial control systems, sensor interfaces, low-cost consumer electronics, motor-control driver boards, LED displays, small appliances, and battery-powered instruments. The wide peripheral mix and 35 I/O lines also suit it for educational platforms and hobby projects where a 44-pin QFN gives compact board layout with the full set of PIC mid-range peripherals. When designing with the QFN package, follow QFN PCB layout guidelines: use an array of thermal vias under the exposed pad to the ground plane, route high-speed signals on inner layers, and provide 4-layer PCB construction for thermal spreading. The industrial temperature range (-40C to +85C) supports outdoor enclosures, factory automation, and automotive non-safety subsystems. This page synthesizes current distributor pricing, drop-in same-package alternatives, and practical QFN design notes not found in the Microchip datasheet alone.

見積もり お問い合わせ
PIC16F887T-I/PT - 8-Bit 20MHz MCU, 14KB Flash, 44-TQFP
PIC16F887T-I/PT

PIC16F887T-I/PT - 8-Bit 20MHz MCU, 14KB Flash, 44-TQFP

The Microchip Technology PIC16F887T-I/PT is an 8-bit RISC microcontroller based on the PIC16 enhanced mid-range core, running up to 20 MHz, offering 14 KB (8K x 14) of self-programmable Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM data memory, and housed in a 44-pin TQFP (10x10 mm) package. It provides 35 digital I/O lines, an integrated 14-channel 10-bit ADC, two PWM modules with Capture/Compare/PWM, two analog comparators with a programmable voltage reference, and a hardware USART plus MSSP for SPI/I2C operation. A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, peripherals, and I/O on one die, executing firmware from non-volatile storage. The PIC16F887 belongs to the PIC16 family hierarchy: PIC16 -> 8-bit PIC microcontroller -> PIC microcontroller -> Microcontroller Unit (MCU) -> semiconductor. It uses Microchip's enhanced 16-bit instruction set with only 35 single-word instructions, while nanoWatt technology provides multiple power-managed modes (Run, Idle, Sleep) for battery-sensitive designs. Key features include nanoWatt power management with multiple idle and sleep modes, an integrated 14-channel 10-bit ADC, two PWM modules, two analog comparators with programmable reference, an Enhanced USART, and a Master Synchronous Serial Port (MSSP) supporting SPI and I2C (Master/Slave). In-system programming (ICSP) via two pins lets firmware be updated in-circuit from a PICkit or ICD, while the In-Circuit Debugger (ICD) interface supports breakpoints and live variable inspection. Brown-out Reset (BOR), Power-on Reset (POR), and a Watchdog Timer (WDT) with its own on-chip RC oscillator provide robust field reliability for industrial and appliance environments. Typical applications include industrial control (sensor signal conditioning and actuator driving), home appliances (washing machines, microwave ovens, induction cooktops), automotive body electronics (lighting controls, HVAC panels - verify AEC-Q100 grade before automotive deployment), and low-power remote sensor nodes. Combined with its 35 I/O lines, the PIC16F887 is well-suited as the central MCU for mid-complexity designs that outgrow the PIC16F84/F88A but do not yet justify a PIC18 or PIC24 upgrade. When designing, leave at least 0.1 uF of decoupling ceramic capacitance on each VDD pin and a bulk aluminum-polymer or tantalum capacitor of 10 uF or larger close to the MCU. For ADC accuracy exceeding 8 ENOB, place the device in Sleep mode during conversions or average multiple samples; ensure RA0-RA3/RA5 analog traces are kept short and the analog supply is filtered from digital noise. Proper ICSP and ICD pin assignment is essential during PCB layout to retain debug access.

見積もり お問い合わせ
PIC16F88T-E/ML - 8-Bit 20MHz 7KB Flash MCU 28-QFN | Microchip
PIC16F88T-E/ML

PIC16F88T-E/ML - 8-Bit 20MHz 7KB Flash MCU 28-QFN | Microchip

The Microchip Technology PIC16F88T-E/ML is a high-performance 8-bit PIC16F Flash microcontroller with 7KB (4K x 14) of program memory, packaged in a 28-pin QFN (6x6 mm) ML package. It executes instructions at 20MHz (200ns instruction cycle) and operates from 4.5V to 5.5V, integrating 368 bytes of SRAM and 256 bytes of EEPROM data memory on-chip. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O on one die. The PIC16F88 belongs to Microchip's mid-range 8-bit PIC family, which sits in the taxonomy: PIC16F family -> PIC16 mid-range core -> 8-bit PIC -> RISC microcontroller -> embedded controller -> semiconductor IC. The MCU category enables digital logic control in nearly every modern electronic product from appliances to industrial automation. Key features include 35 digital I/O pins, an internal 8MHz oscillator with calibration, USART, SPI, and I2C (MSSP) connectivity, a 10-bit ADC with up to 7 channels, two analog comparators, and a capture/compare/PWM (CCP) module. The nanoWatt technology suite provides power-managed sleep modes with currents as low as a few microamps, while the in-circuit serial programming (ICSP) interface allows field reprogramming without removal. Architecturally, the PIC16F88T-E/ML uses a 14-bit instruction word RISC core with hardware stack and 35 single-word instructions, plus an enhanced flash program memory cell. The 'T' suffix indicates tape-and-reel packaging for automated assembly, while 'E/ML' indicates the extended automotive temperature grade (-40C to +125C) in QFN-ML package. This combination delivers reliable operation in harsh thermal environments. Typical applications include industrial automation sensor nodes, automotive body and climate control modules, white-goods control boards, low-power remote sensor transmitters, and battery-backed instrumentation. The integrated ADC and PWM peripherals make it ideal for closed-loop control of fans, lighting dimmers, and small motor drivers. When designing, ensure decoupling with 100nF + 10uF on VDD, configure the configuration word (oscillator, WDT, code protection, brown-out) before programming, and avoid leaving unused comparator inputs floating. Operating voltage is restricted to 4.5V-5.5V; for 3.3V systems, consider PIC16F88-I/ML variants. This page combines distributor pricing, package-level alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F88T-E/SO - 8-Bit 20MHz 7KB Flash MCU | Microchip | SOIC-18
PIC16F88T-E/SO

PIC16F88T-E/SO - 8-Bit 20MHz 7KB Flash MCU | Microchip | SOIC-18

The Microchip Technology PIC16F88T-E/SO is an 8-bit PIC microcontroller operating at 20 MHz with 7 KB of Flash program memory (4K x 14 words) and 256 bytes of EEPROM data memory, packaged in a surface-mount 18-pin SOIC. The 'T' suffix denotes tape-and-reel packaging, the '-E' indicates the extended operating temperature range, and the '/SO' suffix identifies the SOIC-18 (300 mil) outline. The device belongs to Microchip's mid-range PIC16F family and combines a RISC-based Harvard architecture with on-chip peripherals including nanoWatt power management. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral interfaces into one package. The PIC16F88 is a member of the 8-bit microcontroller hierarchy: microcontroller -> embedded controller -> semiconductor device. The PIC16F88 specifically sits in the mid-range PIC family, characterized by 35 single-word instructions, 14-bit instruction word, and 200 ns instruction execution at 20 MHz. It is upwards compatible with the PIC16C7x, PIC16C62xA, PIC16C5X, and PIC12CXXX device families, easing code migration for engineers familiar with these lines. Key features include an 8 MHz internal oscillator (selectable), 35 I/O lines, 7-channel 10-bit analog-to-digital converter (ADC), USART with support for RS-485 and LIN, I2C and SPI synchronous serial ports, two 8-bit timers plus one 16-bit timer, and nanoWatt Technology for low-power operation. The device operates from 4.0 V to 5.5 V (industrial) or 2.0 V to 5.5 V with the internal oscillator enabled, and supports the in-circuit serial programming (ICSP) interface for field firmware updates. Typical applications include industrial control panels, sensor interfacing nodes, low-end remote controls, and battery-powered instruments where the extended temperature range and 35 I/O count are needed. The integrated USART with LIN support makes the part especially suitable for automotive body electronics sub-modules and HVAC node controllers. With its 256-byte EEPROM, the device supports non-volatile parameter storage for calibration data, user settings, and serial numbers without external memory. When designing with this MCU, ensure decoupling capacitors are placed as close as possible to VDD and VSS, and consider the in-circuit debug (ICD) header footprint if firmware iteration speed matters. The 18-SOIC variant supports hand-soldering and rework far better than QFN packages, making it well suited to prototyping, hobby, and low-volume production runs where field repairability is desirable. This page synthesizes drop-in alternatives, parametric comparison, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the PIC16F88T-E/SO against modern pin-compatible options for new designs or legacy maintenance.

見積もり お問い合わせ
PIC16F88T-E/SS - 8-bit 20MHz 7KB Flash MCU | Microchip SSOP-20
PIC16F88T-E/SS

PIC16F88T-E/SS - 8-bit 20MHz 7KB Flash MCU | Microchip SSOP-20

The Microchip Technology PIC16F88T-E/SS is an 8-bit PIC RISC microcontroller with 7KB of Flash program memory operating up to 20MHz, housed in a 20-pin SSOP (Tape and Reel) package. It operates from a 4.5V to 5.5V supply, includes 368 bytes of RAM and 256 bytes of EEPROM, and supports I2C, SPI, and UART/USART serial interfaces. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die. The PIC16F88 belongs to Microchip's mid-range PIC16 family using a RISC (Reduced Instruction Set Computer) architecture, which executes most instructions in a single cycle for predictable timing. Within the broader taxonomy, this device sits as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'F' indicates Flash program memory, supporting in-system self-programming and field upgrades. Key features include nanoWatt technology for low-power operation, an internal 8MHz oscillator, 10-bit ADC, PWM modules, and an automotive temperature grade ('E' suffix = -40C to +125C). The 35 I/O pins on the 18/20/28-pin package family offer flexible interfacing to sensors, displays, and communication buses. On-chip peripherals minimize external component count and reduce BOM cost in space-constrained designs. The PIC16F88T-E/SS uses an enhanced Harvard architecture with separate program and data buses, allowing simultaneous fetch and execution. Its RISC core supports 35 single-word instructions, simplifying code development in MPLAB X IDE and XC8 compiler environments. The integrated nanoWatt power management provides multiple sleep modes for battery-powered applications, with current consumption dropping into the microamp range during idle. Typical applications include automotive sensor modules, industrial control, consumer electronics, low-power remote sensing, and small appliances. The combination of Flash memory, EEPROM data storage, and versatile peripherals makes it well-suited for designs requiring firmware updates and persistent configuration storage. When designing with this device, ensure adequate decoupling (100nF ceramic) near VDD, route the MCLR pin through a proper reset circuit, and respect the 20MHz maximum clock specification at 5V. The 'T' suffix indicates tape and reel packaging for automated assembly, so consider tray or tube variants for prototype runs. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical engineering design notes that complement the Microchip datasheet and parametric databases.

見積もり お問い合わせ
PIC16F88T-I/SS - 20MHz 8-Bit Flash MCU | Microchip Technology
PIC16F88T-I/SS

PIC16F88T-I/SS - 20MHz 8-Bit Flash MCU | Microchip Technology

The Microchip Technology PIC16F88T-I/SS is an 8-bit CMOS flash-based PIC microcontroller rated for operation at up to 20 MHz, with 7 KB of flash program memory organized as 4K x 14 words and 368 bytes of RAM. The device is supplied in a 20-lead SSOP package and is intended for compact embedded-control products requiring programmable nonvolatile firmware storage, digital I/O, and economical embedded processing. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The PIC16F88 belongs to the PIC16 family of 8-bit RISC-style microcontrollers, placing it within the broader hierarchy of embedded controllers, microcontrollers, and semiconductors. Its flash architecture permits firmware to be programmed and updated without removable memory, while its compact package supports space-constrained control boards and instrument panels. Key operating characteristics include a maximum clock speed of 20 MHz, 7 KB of flash memory, 4K x 14-word program organization, and 368 bytes of RAM according to the manufacturer product information. The PIC16F88T-I/SS uses a 4.5 V to 5.5 V supply range for the cited configuration. Its instruction-oriented RISC architecture supports fast execution and predictable control-loop operation, while the integrated flash memory simplifies production programming and field firmware maintenance. The PIC16F88 family combines general-purpose digital I/O with embedded control resources suited to sensing, timing, state-machine, and communication-interface tasks. Because the core operates from an internal 8 MHz oscillator and can also use an external clock source, designers can balance timing requirements, power behavior, and board complexity. Device programming is supported through the PIC16F88’s flash-memory architecture, subject to the programming and electrical requirements defined by Microchip. Typical uses include industrial control panels, building-automation interfaces, compact sensor nodes, appliance controllers, programmable logic devices, and instrumentation modules. In these systems, the 20 MHz processing capability supports responsive control logic, the flash memory stores application firmware, and the 20-SSOP package reduces PCB footprint compared with larger leaded packages. Designers should confirm the complete pin assignment, peripheral mix, oscillator options, and programming configuration against the manufacturer datasheet before layout release. A 100 nF decoupling capacitor should be placed close to each supply connection, the SSOP footprint should follow the manufacturer’s land pattern, and unused inputs should be terminated according to the device-specific recommendations. This page combines the exact orderable MPN, manufacturer specifications, lifecycle information, application guidance, and verified same-package replacement options. It also distinguishes electrically compatible ordering variants from alternatives that require a different footprint, helping engineers make a board-level decision without confusing package compatibility with general functional similarity.

見積もり お問い合わせ
PIC16F913-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip
PIC16F913-E/SS

PIC16F913-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

The Microchip PIC16F913-E/SS is an 8-bit Flash-based CMOS microcontroller in the PIC16F family, featuring 7KB (4K x 14 words) of Flash program memory, 256 bytes of EEPROM data memory, and 352 bytes of SRAM. It operates at up to 20 MHz instruction clock (200 ns instruction cycle), provides 25 I/O pins, and integrates a segmented LCD driver capable of driving up to 60 LCD segments. Housed in a 28-pin SSOP (5.30 mm body width) package, this -E suffix part is specified for the extended industrial temperature range of -40C to +125C. A PIC microcontroller (Peripheral Interface Controller) is an 8/16/32-bit RISC-based microprocessor with integrated Flash, RAM, peripherals, and I/O, optimized for embedded control. PIC MCUs sit within the broader taxonomy of microcontrollers -> microcontrollers and microprocessors -> semiconductor ICs -> integrated circuits. The PIC16F mid-range family uses a 14-bit instruction word with only 35 single-word instructions, giving the PIC16F913-E/SS a powerful yet easy-to-program architecture ideal for consumer, industrial, and human-machine interface designs. Key features include a 20 MHz internal/external oscillator, two 8-bit timers (TMR0, TMR2) and one 16-bit timer (TMR1), an extended watchdog timer (EWDT), brown-out reset (BOR) with software control, programmable low-voltage detect (PLVD), and Microchip's nanoWatt power-management technology for sleep currents as low as sub-microamp levels. In-Circuit Serial Programming (ICSP) is supported via two pins, allowing flash programming after PCB assembly. The integrated LCD driver plus nanoWatt Technology make this part well suited to battery-powered metering, thermostat, and appliance HMI designs that need an on-chip display. The combination of 7KB Flash, 256 bytes EEPROM, hardware timers and 25 I/O delivers enough headroom for typical mid-range applications without requiring an external memory bus. Industrial control panels, consumer appliances with LCD readouts, medical measurement handhelds and instrumentation front panels are common use cases. The wide 2.0V to 5.5V supply range allows direct operation from 2-3 AA cells or a 5V regulated rail. The internal 32 kHz to 8 MHz oscillator with PLL options supports both low-power sleep and full 20 MHz active modes. For engineers migrating a design across PIC16F family members (PIC16F882/883/884/886/887), code compiled for the common mid-range core is largely portable, but verify the A/D channel count, comparator and PWM module selection that differs across siblings. The 'E' temperature grade denotes the -40C to +125C industrial range; the 'I' grade covers -40C to +85C. This page synthesizes distributor pricing, ICCN inventory and verified spec data drawn from the manufacturer datasheet, alongside practical pinout, schematic notes and a recommended-design component selection guide compiled from Microchip application literature, giving engineers a complete resource when designing with the PIC16F913-E/SS.

見積もり お問い合わせ
PIC16F913-I/SS - 7KB Flash 8-Bit MCU w/ LCD | Microchip
PIC16F913-I/SS

PIC16F913-I/SS - 7KB Flash 8-Bit MCU w/ LCD | Microchip

The Microchip Technology PIC16F913-I/SS is an 8-bit PIC16F-series flash microcontroller with integrated LCD segment driver, 7KB (4K x 14) of Flash program memory, 256 bytes of RAM, and 256 bytes of data EEPROM, housed in a 28-pin SSOP (5.30 mm body) package. It executes instructions at up to 20 MHz from an internal 32 kHz to 8 MHz oscillator block and operates across a wide 2.0V to 5.5V supply range, making it compatible with both 3.3V and 5V system rails. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a configurable set of digital and analog peripherals on one die. Within the broader semiconductor hierarchy, the PIC16F913 sits in the 8-bit MCU category under "microcontrollers" and "embedded controllers," with the LCD driver and nanoWatt power management positioning it in the human-machine interface (HMI) and low-power product tier. Key features include up to 60 LCD segments (driven through dedicated VLCD bias and COM/SEG pins), nanoWatt Technology for reduced sleep current, a hardware Brown-Out Reset (BOR) with software control, In-Circuit Serial Programming (ICSP), and 25 mA source/sink I/O capable of directly driving LEDs or relays. The timer subsystem combines an 8-bit Timer0/Timer2, a 16-bit Timer1, and an extended Watchdog Timer (EWDT) for safety-critical applications. Architecturally, the device uses a 14-bit instruction word, Harvard bus (separate program/data paths), and a 35-instruction RISC-style instruction set, which delivers deterministic timing and efficient C-compiler code density. The internal oscillator block supports 31 kHz to 8 MHz without external crystals, lowering BOM cost for cost-sensitive HMI designs. Typical applications include white-goods front panels, thermostat displays, battery-powered metering, medical-device LCDs, industrial sensor readouts, and consumer appliances where a glass-segment LCD replaces an OLED for sunlight readability or ultra-low quiescent current. The wide 2.0V-5.5V range further suits multi-cell battery and USB-powered products. Designers should reserve board space for the VLCD charge-pump or external bias resistors, place a 0.1 uF decoupling capacitor within 5 mm of VDD, and verify ICD/ICSP header placement before PCB layout is finalized for production. The "-I" suffix denotes the industrial -40C to +85C temperature grade suited to outdoor and factory-floor equipment. This page consolidates distributor pricing, drop-in 28-SSOP alternatives, and engineering design notes that go beyond the Microchip datasheet to accelerate HMI product development.

見積もり お問い合わせ
PIC16F913T-I/ML - 8-bit PIC MCU, 7KB Flash, LCD Driver, 28-QFN | Microchip
PIC16F913T-I/ML

PIC16F913T-I/ML - 8-bit PIC MCU, 7KB Flash, LCD Driver, 28-QFN | Microchip

The Microchip PIC16F913T-I/ML is an 8-bit Flash-based CMOS microcontroller from the PIC16F9xx family, featuring 7 KB (4K x 14 words) of program Flash memory, 352 bytes of RAM, and an integrated LCD driver. The device executes instructions at up to 20 MHz (200 ns instruction cycle) from an internal oscillator and is housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad, supplied on tape-and-reel for high-volume SMT assembly. An 8-bit PIC microcontroller is a Harvard-architecture RISC device built around a single accumulator-based CPU, with separate program and data buses. The PIC16F9xx family sits within Microchip's mid-range PIC16 lineup, which in turn belongs to the broader PIC microcontroller family, the 8-bit MCU category, and ultimately the integrated-circuit semiconductor hierarchy. Devices in this class are widely used in cost-sensitive, low-power embedded applications where deterministic interrupt response and easy peripheral integration outweigh the need for higher MIPS. Key features of the PIC16F913 include 25 digital I/O pins, an integrated 4-segment LCD driver supporting up to 60 segments, a 10-bit Analog-to-Digital Converter (ADC) with up to 12 channels, a USART for asynchronous serial communication, MSSP for SPI and I2C, three timers, two analog comparators, and nanoWatt power-management technology that drops quiescent current below 1 uA in sleep. The "I" suffix indicates the industrial temperature range of -40C to +85C, and the "ML" suffix specifies the 28-pin QFN package. The part's architecture uses a 14-bit instruction word with single-cycle execution for most instructions, an interrupt controller with hardware context saving, and a wide operating voltage range of 2.0 V to 5.5 V. Flash memory is rated for >100,000 erase/write cycles, supporting in-circuit serial programming (ICSP) through PGD and PGC pins. Brown-out Reset, Power-on Reset, and a Watchdog Timer with on-chip low-power oscillator improve system robustness in unattended installations. Typical applications include consumer white goods and appliances with LCD front panels, smart thermostats, battery-powered metering and sensor nodes, low-cost security keypads, and industrial operator-interface modules. The on-chip LCD driver eliminates an external segment driver, reducing BOM cost in any design that needs a numeric or icon display. When designing with the PIC16F913, consider reserving the PGD/PGC pins for ICSP and using MPLAB X IDE with the XC8 compiler. External decoupling of 100 nF plus 10 uF bulk capacitance on VDD, plus a separate AVDD filter for ADC accuracy, are standard practice for this family. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

見積もり お問い合わせ
PIC16F914-E/ML - 8-Bit 20MHz 7KB Flash MCU w/ LCD Driver | Microchip
PIC16F914-E/ML

PIC16F914-E/ML - 8-Bit 20MHz 7KB Flash MCU w/ LCD Driver | Microchip

The Microchip PIC16F914-E/ML is a 8-bit PIC16 family flash microcontroller with integrated LCD driver, running at 20 MHz, with 7 KB (4K x 14) of flash program memory, 256 bytes of RAM, and 35 I/O lines, housed in a 44-pin QFN (8x8) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication ports, and I/O. Within the broader semiconductor taxonomy, an MCU sits between a discrete microprocessor (which requires external peripherals) and an ASIC; the PIC16F914 specifically belongs to the mid-range PIC16 family, which uses a RISC architecture with 35 single-word instructions and nanoWatt power management technology. This is the platform from which embedded control for human-machine interfaces is built. Key features include a 10-bit ADC with multiple channels, an integrated LCD driver supporting up to 96 segments, nanoWatt sleep modes for battery-friendly operation, and a wide 2.0 V to 5.5 V operating voltage range. The 44-QFN package measures 8 mm x 8 mm with an exposed thermal pad that improves power dissipation. The E suffix denotes the extended industrial temperature grade of -40 C to +125 C. Architecturally, the PIC16F914 employs a Harvard RISC core with separate program and data buses, giving deterministic 200 ns instruction execution at 20 MHz. On-chip peripherals include Timer0/1/2, an enhanced CCP module, USART, MSSP (SPI/I2C), 10-bit ADC, comparators, voltage reference, and a Segment LCD controller with charge pump, enabling designers to remove an external LCD driver IC. Typical applications include consumer white goods with segment LCD displays, industrial control panels, HVAC thermostat interfaces, metering and measurement endpoints, and small medical device UI boards. The wide temperature range and nanoWatt sleep modes make it suited for always-on battery-powered or mains-attached appliances. When designing, pay close attention to the exposed pad layout for the 44-QFN: it must be soldered to the PCB ground plane for both thermal and electrical performance, and the LCD segment pins are multiplexed with digital I/O so pin allocation must be planned during schematic capture. The internal oscillator is accurate enough for general-purpose timing but not for asynchronous serial without calibration. This page synthesizes distributor pricing, verified pin-compatible alternatives drawn from Microchip's PIC16 family, and practical design notes that go beyond the manufacturer datasheet to help embedded engineers select and qualify the right MCU quickly.

見積もり お問い合わせ
PIC16F914-E/P - 8-Bit 20MHz Flash MCU | Microchip
PIC16F914-E/P

PIC16F914-E/P - 8-Bit 20MHz Flash MCU | Microchip

The Microchip Technology PIC16F914-E/P is an 8-bit CMOS flash-based PIC microcontroller with 7 KB of program memory, 256 bytes of RAM, 35 I/O pins, and a 20 MHz maximum speed. The device is supplied in a 40-pin DIP package measuring 0.600 inches wide and 15.24 mm long, with tube packaging for through-hole assembly. Its integrated LCD driver and nanoWatt Technology support cost-sensitive embedded control applications that combine general-purpose I/O with display-oriented peripheral functionality. A microcontroller is a programmable semiconductor containing a processor core, memory, and peripherals on one integrated circuit. The PIC16F914 belongs to the PIC16 family of 8-bit reduced-instruction-set computers. Within the product hierarchy, it is a flash-based embedded microcontroller, a type of semiconductor designed for control, measurement, and interface tasks. The PIC16F914-E/P combines 4K × 14-word flash program storage with 256 × 8-bit data RAM, allowing application firmware and working variables to reside on the same device. Key features include a 20 MHz operating speed, an internal oscillator, 35 I/O lines, LCD-driver capability, and nanoWatt Technology for low-power operation. The verified part listing identifies 35 I/O pins, while another distributor description reports 36 I/O; this difference is retained as an uncertainty rather than resolved without the complete official pin table. The 40-pin DIP format provides generous I/O access for human-machine interfaces, panel controls, instrumentation, and legacy industrial equipment requiring through-hole construction. The PIC architecture uses a compact instruction set containing 35 single-word instructions and supports an instruction execution time of 200 nanoseconds. Flash program memory permits firmware to be updated during development and production programming rather than requiring a one-time-programmable device. The integrated LCD driver can reduce external display-controller overhead in suitable character or segment-based display designs, while the general-purpose I/O supports switches, sensors, indicators, and external interface logic. Typical applications include industrial control panels, standalone data-acquisition modules, laboratory instruments, programmable display controllers, HVAC controls, and embedded accessories that use an LCD and several digital I/O lines. A 20 MHz control loop is appropriate for coordination of sensors, switches, and display updates where deterministic local control is more important than high-bandwidth communication. The through-hole package also supports prototype boards, repair work, and applications using sockets rather than compact SMT assemblies. Designers should confirm the exact pin assignments, oscillator connections, programming interface, and LCD segment mapping against the manufacturer datasheet before layout. The 40-pin DIP footprint requires adequate board spacing and mechanically robust through-hole insertion, while the device's operating-temperature limits, electrical maximum ratings, and regulatory declarations must be confirmed for the intended environment. The -E grade designation should not be used alone to infer an unsupported temperature range. This page consolidates the verified manufacturer specifications, distributor pricing, package details, lifecycle information, and engineering-oriented application guidance for the PIC16F914-E/P. It also distinguishes confirmed facts from unavailable details and evaluates same-package alternatives without presenting functionally similar but mechanically different parts as drop-in replacements.

見積もり お問い合わせ