マイクロコントローラ

製品 (19,000+)

PIC18F47K40T-I/PT - 128KB Flash 8-bit MCU, 64MHz, 44-TQFP | Microchip
PIC18F47K40T-I/PT

PIC18F47K40T-I/PT - 128KB Flash 8-bit MCU, 64MHz, 44-TQFP | Microchip

The Microchip Technology PIC18F47K40T-I/PT is an 8-bit PIC18(XLP) microcontroller built on a C-compiler-optimized RISC architecture, delivering 64 MHz CPU performance with 128 KB (64K x 16) of on-chip Flash program memory in a 44-pin TQFP (10x10 mm) package. The 'T' suffix denotes Tape & Reel packaging, 'I' indicates the industrial -40C to +85C operating temperature grade, and 'PT' specifies the 44-pin TQFP. The device integrates 4 KB RAM, 256 B EEPROM, and a rich analog/digital peripheral set including a 10-bit ADC with Computation (ADC2), a 5-bit DAC, comparators, PWM, CCP, CWG, HLT, WWDT, CRC/Memory Scan, Zero-Cross Detect, and Peripheral Pin Select (PPS). Operating voltage spans 2.3 V to 5.5 V, making the part compatible with both 3.3 V and 5 V rails commonly used in mixed-signal designs. A PIC18(XLP) microcontroller is a member of Microchip's PIC18 family that pairs a Harvard-architecture 8-bit CPU with eXtreme Low-Power (XLP) technology. The PIC18 line sits in the hierarchy 8-bit microcontroller -> microcontroller -> embedded controller -> semiconductor, and XLP variants add sleep currents down to nanoampere levels, brown-out-reset, ultra-low-power watchdog timer (WWDT), and idle/doze modes. The PIC18F47K40 specifically adds Core Independent Peripherals (CIPs) such as CWG, CRC/SCAN, and ZCD, enabling deterministic hardware-driven tasks without CPU intervention and reducing firmware complexity and BOM cost. Key differentiating features include Peripheral Pin Select (PPS), which lets the designer remap many digital peripherals to a wide choice of I/O pins, simplifying PCB layout. The ADC2 module provides hardware averaging and threshold comparison; the CWG (Complementary Waveform Generator) drives half-bridges with dead-band control; and the HLT (Hardware Limit Timer) implements safety time-outs for Class B or IEC 60730 firmware. Together, these CIPs allow safety and signal-conditioning functions to run autonomously while the CPU sleeps, which is the central value proposition of the K40 series. Typical applications include industrial sensor conditioning, building automation, low-power IoT nodes, white goods and HVAC control panels, lighting control with TRIAC dimming, and general-purpose 5 V embedded controllers. The 44-pin TQFP footprint exposes 36 user I/O pins plus dedicated communication peripherals (UART/SPI/I2C) and gives generous headroom for external sensors, keypads, and human-machine interfaces. When designing with this part, ensure Vdd decoupling uses 100 nF ceramics placed within 2-3 mm of each power pin, and follow Microchip's PIC18F47K40 datasheet for ICSP programming pin assignments (PGC/PGD). The device supports the MPLAB X IDE, MPLAB XC8 compiler, and the MPLAB Snap / PICkit 4 in-circuit debuggers. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47K42-E/ML - 128KB Flash 8-bit MCU 44-QFN | Microchip
PIC18F47K42-E/ML

PIC18F47K42-E/ML - 128KB Flash 8-bit MCU 44-QFN | Microchip

The Microchip PIC18F47K42-E/ML is a 64 MHz 8-bit PIC microcontroller integrating 128 KB of Flash, 8 KB of RAM and 1 KB of EEPROM in a 44-pin QFN (8x8 mm) package, designed around the XLP (eXtreme Low Power) platform. It belongs to the PIC18(L)FxxK42 family that scales across 28-, 40- and 48-pin footprints, with this specific -E/ML variant covering the extended (-40C to +125C) industrial temperature range and the QFN surface-mount option. What is a PIC18F microcontroller? The PIC18F is Microchip's 8-bit MCU family using a modified Harvard RISC architecture, evolved into a high-performance low-power platform (XLP) for applications that mix digital control with on-chip analog. Within the broader taxonomy: PIC18F -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The K42 sub-family specifically adds Core Independent Peripherals (CIPs) such as the 12-bit ADC2 with computation, 5-/8-bit DAC, op-amps, comparators, PWM, DMA, vector interrupts and configurable logic cells, letting many functions run without CPU involvement. Key features of the PIC18F47K42-E/ML include 128 KB self-programmable Flash program memory, 8 KB SRAM data memory, 1 KB data EEPROM, a 64 MHz internal oscillator (1% accuracy), and the high-performance 14 MIPS core at 64 MHz (4x PLL). The 12-bit ADC2 with Automated Accumulation and Computation supports touch and sensor averaging offloaded from the CPU, while dedicated DMA channels move data between peripherals and memory without core intervention. The device integrates up to 36 I/O, four 16-bit timers, two I2C/SPI/I2S peripherals, two UARTs, two op-amps, three comparators with DAC references, up to four 10-bit PWM channels and the DMA controller. The MAP (Memory Access Partitioning) and DIA (Device Information Area) features add bootloader and serialization support for security and field upgrades. CIPs combined with the XLP idle/doze/PMD modes allow parts of the chip to remain active while others sleep. Typical applications include consumer and industrial control panels, IoT sensor nodes with battery life targets, low-power touch interfaces, motor control via integrated PWM and op-amps, and USB or BLE-hosted accessories that pair a PIC18F47K42 with an external transceiver. The wide memory headroom supports a real-time OS-style scheduler, USB stack, or a touch-sensing library in firmware. When designing with this MCU, note the 1.8-5.5V VDD range, the 44-QFN thermal pad (must be soldered to the ground plane for power dissipation and signal integrity) and the MSSP/CCP routing for the chosen peripheral mix. Use the MPLAB X IDE with the XC8 compiler and the PIC18F47K42 Curiosity Nano (DM182028) evaluation board for fastest bring-up. This page synthesizes distributor pricing, drop-in same-package alternatives and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47K42-E/MV - 128KB Flash 8-bit MCU | Microchip
PIC18F47K42-E/MV

PIC18F47K42-E/MV - 128KB Flash 8-bit MCU | Microchip

The Microchip PIC18F47K42-E/MV is a high-performance 8-bit PIC microcontroller with 128 KB Flash, 8 KB SRAM, and 1 KB EEPROM, operating up to 64 MHz in a 40-pin UQFN (5x5 mm) package. It belongs to the PIC18(L)FxxK42 family that integrates vector interrupts, DMA, MAP, DIA, DAC, comparators, 12-bit ADC2 and PWM peripherals while consuming nanoWatt XLP sleep currents. The 'E' suffix denotes the Extended (-40C to +125C) operating temperature grade and the 'MV' suffix identifies the 40-UQFN surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, data EEPROM and a rich set of analog and digital peripherals on one die. PIC18 microcontrollers use a Harvard RISC architecture with 16-bit opcodes and 8-bit data paths and sit in Microchip's portfolio between baseline PIC10/12/16 parts and the 16-bit PIC24/dsPIC families. They are widely used when deterministic interrupt response, low sleep current, and large program memory are required in cost-sensitive designs. Key features of this device include 128 KB Flash program memory (64K x 16 words), 8 KB SRAM, 1 KB data EEPROM, 12-bit ADC2 with computation, 5-bit DAC, multiple comparators, CCP/PWM peripherals, UART/SPI/I2C, DMA, vector interrupts, and core-independent peripherals (CIPs) that offload tasks from the CPU. The Extended temperature grade (-40C to +125C) makes the 'E/MV' variant suitable for industrial and harsh-environment applications. The CIP architecture enables hardware-driven logic, signal generation, and timing without CPU intervention, freeing the core for application code. The 12-bit ADC2 with computation performs averaging, filtering, and threshold compares in hardware. DMA moves data between peripherals and memory autonomously, allowing deterministic throughput even at low clock speeds and supporting nanoWatt XLP deep sleep modes for battery-powered designs. Typical applications include industrial sensor nodes, building automation, motor control (BLDC and stepper), IoT edge nodes, home appliances, low-power wireless sensor hubs, lighting controllers, and human-machine interface (HMI) panels. The 128 KB Flash comfortably hosts BLE/BLE/Zigbee/LoRa stacks and graphical display drivers, while the 12-bit ADC2 with computation supports direct sensor conditioning. When designing with this part, pay attention to the 40-pin UQFN (MV) package - it requires careful PCB thermal relief and via-in-pad design for the exposed pad. Use the MPLAB X IDE with MPLAB Code Configurator (MCC) Melody to generate peripheral drivers and Core Independent Peripheral (CIP) configurations. Program and debug using MPLAB PICkit 4, SNAP, or ICD 4 in-circuit debuggers via the ICSP interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers rapidly evaluate the PIC18F47K42-E/MV for new and existing designs.

見積もり お問い合わせ
PIC18F47K42-E/P - 128KB Flash 8-Bit MCU 64MHz | Microchip
PIC18F47K42-E/P

PIC18F47K42-E/P - 128KB Flash 8-Bit MCU 64MHz | Microchip

The Microchip Technology PIC18F47K42-E/P is an 8-bit PIC microcontroller featuring 128KB of Flash program memory, 8KB of RAM, and 256 bytes of EEPROM, packaged in a 40-pin PDIP through-hole format. It operates at up to 64 MHz across a supply range of 2.3V to 5.5V, with the high-performance 64MHz core providing roughly 16 MIPS of throughput. The device integrates the CIP (Core Independent Peripherals) ecosystem including a 12-bit ADC with Computation (ADC2), DAC, comparators, PWM, DMA, vector interrupts, and Device Information Area (DIA) for calibration and unique ID. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, digital and analog peripherals, and I/O. PIC18F-series devices sit within Microchip's 8-bit PIC architecture hierarchy: PIC10/12/16/18 family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC18FxxK42 sub-family emphasizes XLP (eXtreme Low Power) technology, with nanoWatt XLP sleep currents below 100 nA in deep sleep, and Active mode currents around 5 mA at full CPU speed, making it well suited to battery-powered and energy-harvesting designs. Key differentiating features include the unique combination of DMA-driven peripheral operation that offloads the core, a vectored interrupt controller for deterministic response, a 12-bit ADC2 with automated averaging and threshold comparison, and a peripheral pin-select (PPS) system that routes digital functions to nearly any I/O pin. The device offers 36 interrupt sources, a 32-bit CRC scanner, and a windowed watchdog timer (WWDT). Typical applications include industrial sensor conditioning, low-power IoT sensor nodes, motor control with the PWM and 12-bit ADC, automotive body and interior subsystems, white goods and HVAC control, and home appliances. The wide operating voltage and temperature range (extended -40C to +125C) makes the part suitable for both commercial and industrial deployment. When designing with this device, plan the PPS routing early to avoid conflicts, and budget for the programming/debug interface (PGC/PGD). Microchip's MPLAB X IDE with XC8 compiler and the Curiosity Nano (DM182028) evaluation board dramatically accelerate bring-up. This page synthesizes distributor pricing, drop-in PIC18F47K42 variants, and CIP design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC18F47K42-E/PT - 8-Bit 64MHz 128KB Flash MCU 44-TQFP | Microchip
PIC18F47K42-E/PT

PIC18F47K42-E/PT - 8-Bit 64MHz 128KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F47K42-E/PT is a high-performance 8-bit PIC18 microcontroller with 128 KB Flash, 8 KB SRAM, and a 64 MHz CPU core, housed in a 44-pin TQFP (PT) 10x10 mm package. The device integrates a rich set of Core Independent Peripherals (CIPs), including CWG, CCP, PWM, NCO, 12-bit ADC with computation (ADCC), and a Direct Memory Access (DMA) engine that offloads data movement from the CPU. The Extended (-E) temperature variant operates from -40C to +125C. An 8-bit PIC microcontroller is a Harvard-architecture RISC processor that executes most instructions in a single cycle, optimized for deterministic real-time control. The PIC18Fxx K42 family extends the legacy PIC16 architecture with vectored interrupts, hardware multiplier, and a wider 16-bit instruction word, while preserving the family's ultra-low-power (XLP) sleep characteristics. Within the broader taxonomy, it sits under: 8-bit MCU -> PIC18 -> PIC18F K42 family -> Microcontroller -> Embedded processing IC -> Semiconductor. The 128 KB self-programmable Flash enables field firmware updates via bootloader or ICSP, while 1 KB of EEPROM supports non-volatile data storage for user settings, calibration, or serial numbers. The integrated 12-bit ADCC with oversampling supports up to 28 analog input channels with hardware averaging and threshold comparison, removing the CPU from routine signal conditioning. Vectored interrupts with priority and peripheral pin select (PPS) provide flexible signal routing to nearly any I/O pin. The architecture pairs a 64 MHz core with an 8-channel DMA controller, allowing peripherals such as ADC, UART, SPI, and I2C to move data autonomously. Combined with CIPs like CWG (Complementary Waveform Generator) and PWM, the device excels in motor control, lighting, and switched-mode power conversion where the CPU is otherwise idle. The XLP feature set delivers nanoWatt sleep currents suitable for battery-powered sensor nodes. Typical applications include BLDC and stepper motor drives, LED lighting controllers, home appliance user interfaces, IoT edge nodes, and industrial sensor hubs. The wide -40C to +125C operating range plus 5V-tolerant I/O makes it well-suited to harsh industrial environments. When designing with this device, ensure the ICSP/PGD/PGC pins are reserved for in-circuit programming and that the PPS configuration matches your schematic. Use the DMA to chain ADC conversions and result storage without CPU intervention to maximize real-time headroom. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC18F47K42-I/ML - 128KB Flash 8-bit MCU | Microchip QFN-44
PIC18F47K42-I/ML

PIC18F47K42-I/ML - 128KB Flash 8-bit MCU | Microchip QFN-44

The Microchip Technology PIC18F47K42-I/ML is a high-performance 8-bit PIC18 microcontroller with 128 KB Flash, 8 KB SRAM, and 1 KB EEPROM, packaged in a 44-lead QFN (ML) wettable-flank surface-mount package. It operates at up to 64 MHz (16 MIPS) with an enhanced mid-range PIC18 CPU core, integrates a 12-bit ADC2 with computation, a 5-bit/8-bit DAC module, three analog comparators, and a DMA controller that can move data between peripherals without CPU intervention. An 8-bit microcontroller (MCU) is a single-chip processor that combines a CPU, program memory (Flash), data memory (RAM), non-volatile storage (EEPROM), and multiple peripherals (timers, ADC, communication ports) onto one silicon die. The PIC18F47K42 belongs to the Microchip PIC18 family, which sits in the wider hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'F' prefix denotes Flash program memory; the '47' identifies the 128 KB memory tier and 44-pin logic; the 'K42' family adds Core Independent Peripherals (CIPs) such as CLC, NCO, PWM with DMA trigger and intelligent analog features for mixed-signal embedded designs. Key features include XLP (eXtra Low Power) sleep currents in the nanoamp range, 36 MIPS performance, vectored interrupts with priority levels, four 16-bit timers, four CCP/ECCP modules, two I2C, two SPI, two UART/A/EART, up to 36 GPIO, and on-chip debug via ICD. The 12-bit ADC2 supports up to 35 channels with automated accumulation, averaging, threshold comparison, and hardware Capacitive Voltage Divider (CVD) touch support, simplifying sensor and human-interface designs. Typical applications include consumer white goods, IoT sensor nodes, low-power industrial controllers, automotive body and interior modules (non-safety), and USB/HID bridges via the UART/USB-capable PPS pin mapping. The wide 2.3V-5.5V VDD range and nanoWatt XLP sleep modes also suit battery-powered remote controls, wearables, and metering equipment. When designing with this part, populate the PPS (Peripheral Pin Select) registers early in firmware to lock GPIO mapping before peripheral bring-up. Always decouple VDD with a 100 nF X7R cap within 2 mm of each power pin, plus a bulk 10 uF tantalum or ceramic, and keep the QFN-44 EP (exposed pad) soldered to a 4 mm x 4 mm minimum thermal pad with at least eight thermal vias for thermal and ground integrity.

見積もり お問い合わせ
PIC18F47K42-I/MV - 8-Bit 64MHz 128KB Flash MCU 40-UQFN
PIC18F47K42-I/MV

PIC18F47K42-I/MV - 8-Bit 64MHz 128KB Flash MCU 40-UQFN

The Microchip Technology PIC18F47K42-I/MV is an 8-bit PIC microcontroller from the PIC18FxxK42 family, operating at up to 64 MHz with 128 KB of Flash program memory (64K x 16), 8192 bytes of SRAM, and 1024 bytes of EEPROM, housed in a 40-pin UQFN (MV) package measuring 5 mm x 5 mm. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile working memory (SRAM), non-volatile data storage (EEPROM), and a rich set of peripherals including analog-to-digital converters, timers, communication interfaces, and I/O pins. The PIC18 architecture sits within Microchip's 8-bit MCU portfolio and is widely deployed in cost-sensitive, low-power embedded designs; it ranks within the taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 'F47K42' family specifically introduces the XLP (eXtreme Low Power) platform, Core Independent Peripherals (CIPs), and a hardware DMA controller. Key features include 36 KB of self-programming Flash with block protection, hardware DMA between memory and peripherals without CPU intervention, vectored interrupts for low-latency servicing, a 12-bit differential ADC with computation, three Complementary Waveform Generators (CWGs) with dead-band control, four Configurable Logic Cells (CLCs) for combinational/sequential logic, and four 16-bit plus three 8-bit timers with Hardware Limit Timer (HLT) support. The device operates from 2.3 V to 5.5 V. Technically, the PIC18F47K42 integrates a C-compiler-optimized Harvard architecture with a 16-bit instruction word and 8-bit data path, allowing linear addressing up to 64 KB. Core Independent Peripherals such as the CLC and CWG run autonomously of the CPU, freeing cycles for application code. The 12-bit ADC can operate in differential mode, supporting up to 35 channels (depending on package), and the DMA engine offloads peripheral-memory transfers for high-throughput sensor and communication pipelines. Typical applications include industrial sensor nodes, building automation, IoT edge devices, motor control with the CWG, USB-less consumer appliances, and low-power battery-backed instrument clusters. The combination of XLP sleep currents in the sub-uA range and high-resolution analog peripherals makes it suitable for always-on sensor hubs. When designing with this part, route the UQFN exposed pad to a low-impedance ground plane with multiple thermal vias to maintain electrical and thermal performance, and provision at least 0.1 uF decoupling on each VDD pin within 2 mm of the package. This page synthesizes verified distributor pricing, datasheet-derived specifications, and drop-in same-package alternatives that go beyond what a single manufacturer datasheet typically presents.

見積もり お問い合わせ
PIC18F47K42-I/P - 128KB Flash, 8-bit PIC MCU, 40-PDIP | Microchip
PIC18F47K42-I/P

PIC18F47K42-I/P - 128KB Flash, 8-bit PIC MCU, 40-PDIP | Microchip

The Microchip Technology PIC18F47K42-I/P is an 8-bit PIC18 microcontroller built on the eXtreme Low Power (XLP) platform, integrating 128 KB of Flash program memory, 8 KB of RAM, and 256 bytes of EEPROM in a 40-pin PDIP through-hole package. The CPU executes instructions at up to 64 MHz from the internal 64 MHz oscillator, delivering approximately 16 MIPS of throughput while consuming as little as 30 nA in sleep mode with full RAM retention. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, and peripheral interfaces on one die. Within the broader taxonomy, a microcontroller belongs to the semiconductor > integrated circuit > microcontroller > 8-bit MCU > PIC18 family of devices. PIC18 MCUs use a modified Harvard RISC architecture and are widely deployed in cost-sensitive embedded control, IoT end-nodes, sensor hubs, and human-machine interface applications where deterministic real-time response and low standby power are essential. The PIC18F47K42-I/P combines 12-bit ADC2 (up to 35 channels with automatic Capacitive Voltage Divider support), 5-bit DAC outputs, three op-amps, two comparators, DMA, vector interrupts, and a Peripheral Pin Select (PPS) mapping engine that lets designers remap digital peripherals to any I/O pin. The 128 KB Flash is partitioned for bootloader and field firmware updates, while the MAP and DIA (Device Information Area) features support unique per-chip serialization and calibration. Operating voltage spans 1.8 V to 5.5 V with active core current below 5 mA at 64 MHz and idle currents under 1 mA. Hardware peripherals include PWM, CWG, NCO, UART, SPI, I2C, and a 32-level hardware stack. The integrated nanoWatt XLP technology enables battery-powered applications such as wireless sensor nodes, wearables, and remote controls where standby drain dominates battery life. Typical applications include IoT sensor nodes, low-power wireless devices, automotive body and interior modules, industrial control panels, consumer appliances, and USB-to-UART bridge firmware platforms. The 40-pin PDIP form factor is especially well suited to prototyping, hobbyist projects, and educational platforms where through-hole soldering and breadboarding are preferred over surface mount. When designing with the PIC18F47K42-I/P, leave VDD/VSS decoupling (100 nF plus 10 µF bulk) within 5 mm of every supply pin, and tie the MCLR pin through a 10 kΩ pull-up to VDD for reliable reset. The PPS configuration registers must be programmed in the user initialization code; otherwise peripherals default to fixed pin assignments. This page consolidates real distributor pricing, verified same-family drop-in alternatives, and practical PCB/design notes not aggregated in the manufacturer datasheet, making cross-engineer comparison faster than reading the 800-page datasheet cover-to-cover.

見積もり お問い合わせ
PIC18F47K42-I/PT - 8-Bit 64MHz 128KB Flash MCU | Microchip
PIC18F47K42-I/PT

PIC18F47K42-I/PT - 8-Bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F47K42-I/PT is an 8-bit PIC microcontroller from the PIC18FxxK42 family, delivering 64 MHz CPU performance with 128 KB of Flash program memory, 8 KB of SRAM, and 1 KB of EEPROM in a 44-pin TQFP (PT) package. It operates from 2.3 V to 5.5 V and is targeted at 28-, 40-, and 48-pin general-purpose embedded designs where low power, rich peripherals, and intelligent analog integration are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a configurable set of peripherals (ADC, timers, PWM, communication interfaces, I/O) on one die. Within the wider power-management and embedded hierarchy, an MCU sits above logic ICs and is the active control element that supervises sensors, actuators, displays, and communication buses. The PIC18 architecture used here is an 8-bit accumulator-based Harvard design with hardware multiply, extended instruction set, and 31-level stack. Key features of the PIC18F47K42-I/PT include the XLP (eXtreme Low Power) family designation with nanoWatt XLP sleep currents, a 12-bit differential ADC2 with computation, a 5-bit/8-bit DAC, comparators, multiple UART/SPI/I2C interfaces, DMA, vector interrupts, and up to 36 I/O pins. The 44-pin TQFP-10x10 package is footprint-compatible with the other 40-pin and 48-pin members of the K42 family, enabling design reuse across product variants. The device integrates Core Independent Peripherals (CIPs) that operate without CPU intervention - including signal measurement timers, PWM, CLC (Configurable Logic Cell), and the ADC2 with hardware oversampling. This offloads deterministic tasks from the core, lowering active-mode duty cycle and enabling lower average power than traditional 8-bit MCUs running software loops. Typical applications include consumer appliances, HVAC control, motor control (BLDC fans, small pumps), LED lighting controllers, USB/HID interfaces, smart sensors, battery-powered IoT edge nodes, and general-purpose industrial control. The K42 family is widely used where a 5V-tolerant 8-bit MCU with strong analog and DMA replaces discrete analog front-ends. When designing with this part, plan the 44-pin TQFP-10x10 PCB land pattern early; ensure VDD/VSS decoupling is placed within 2 mm of each pair, leave room for ICD programming header, and pick the right I-grade (industrial -40 to +85 C) vs E-grade (extended -40 to +125 C) for the thermal environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47K42T-I/ML - 128KB Flash 8-Bit MCU | Microchip
PIC18F47K42T-I/ML

PIC18F47K42T-I/ML - 128KB Flash 8-Bit MCU | Microchip

The Microchip Technology PIC18F47K42T-I/ML is an 8-bit PIC microcontroller in the PIC18FxxK42 family, featuring 128 KB (64K x 16) of Flash program memory, 8 KB of SRAM, and a 64 MHz operating frequency in a 44-pin QFN (8x8) package with exposed thermal pad. The trailing T-suffix denotes tape-and-reel packaging, while the I/ML suffix indicates the industrial temperature grade (-40C to +85C) and the 44-VQFN MLP package. An 8-bit microcontroller is a single-chip CPU that processes data in 8-bit words and integrates Flash program memory, SRAM, EEPROM, and peripherals on one die. Microcontrollers sit below microprocessors in the embedded hierarchy and above simple digital logic in complexity: they pair a CPU core with non-volatile memory, A/D converters, timers, and serial interfaces so a single IC replaces what otherwise would require many discrete parts. Key features include Core Independent Peripherals (CIPs) such as CWG, CCP, PWM, NCO, and configurable logic cells, 12-bit ADC with computation (ADC2), multiple serial interfaces (UART, SPI, I2C), and Microchip's eXtreme Low-Power (XLP) technology for battery-friendly designs. The device operates across 2.3V to 5.5V VDD with on-board voltage regulator options. The architecture is built on an enhanced PIC18 RISC core with a hardware multiply and a 32-level hardware stack, optimizing throughput and code density. The device integrates DMA, an instruction cache, and a high-endurance Flash rated for 10K erase/write cycles, plus built-in touch-sensing via the 12-bit Analog-to-Digital Converter with computation. Typical applications include industrial IoT sensor nodes, home automation controllers, low-power battery-powered instrumentation, and consumer human-interface products. Designers also deploy the PIC18F47K42 in motor-control sub-systems and automotive body-comfort modules where its AEC-Q100 sister part (PIC18F47K42-E/ML) is qualified. When designing with this device, plan pin assignments around the QFN exposed pad for thermal dissipation and route power and decoupling capacitors first. The Debug header pinout supports Microchip's Curiosity Nano (DM182028) and the MPLAB ICD 4 / PKOB in-circuit debuggers via 2-wire ICSP. This page synthesizes distributor pricing, drop-in QFN alternatives in the same 44-VQFN footprint, and engineering design notes that complement the Microchip 40001919G datasheet.

見積もり お問い合わせ
PIC18F47K42T-I/PT - 64MHz 128KB Flash 8-bit MCU | Microchip
PIC18F47K42T-I/PT

PIC18F47K42T-I/PT - 64MHz 128KB Flash 8-bit MCU | Microchip

The Microchip Technology PIC18F47K42T-I/PT is an 8-bit PIC microcontroller built around the PIC18 XLP core, delivering up to 64 MHz of CPU performance with 128 KB of Flash program memory, 8 KB of SRAM, and 1 KB of EEPROM in a 44-pin TQFP (PT) package. Its low-power XLP architecture, vectored interrupt system with Peripheral Interrupt Controller (PIC), Direct Memory Access (DMA) engine, and configurable Module Addressable Peripherals (MAP) make this MCU well-suited to mixed-signal embedded designs where deterministic I/O and low sleep current are required. A microcontroller, often abbreviated MCU, is a single-chip processor that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces. PIC microcontrollers are 8-bit RISC-flavored Harvard-architecture controllers widely used in industrial, consumer, and automotive subsystems where predictable interrupt latency and long-term supply continuity matter more than raw MHz. Key features include a 12-bit ADC2 with up to 35 channels of analog input, a 5-bit/8-bit DAC output, dual rail-to-rail comparators, complementary waveform generators for advanced PWM, and support for a 1.8V to 5.5V supply range. The PT package is a 10 mm × 10 mm TQFP-44 with 36 general-purpose I/O pins plus dedicated oscillator, programming, and reset pins, allowing direct replacement for PIC18F46K42 / PIC18F45K42 designs that use the same footprint. The device is implemented in an enhanced flash process and integrates a multi-stage instruction pipeline, hardware multiplier, and zero-pin overhead background debug (ICSP). These attributes enable C-compiled firmware to deliver real-time motor control, sensor fusion, and user-interface response while preserving wide operating headroom down to 1.8V. Typical applications include industrial control panels, sensor hub designs, low-power IoT edge nodes, USB-free human-interface peripherals, and cost-sensitive automotive body modules. The vectored interrupt controller and DMA paths reduce CPU loading when multiple sensor streams are sampled concurrently. When designing with this part, prefer the TQFP-44 footprint only if a 10x10 mm land pattern is acceptable - the alternate -I/PT pinout is the 8-bit bare variant without an internal op amp. Use external bypass capacitors of 100 nF plus 10 µF near VDD and add a decoupling cap on AVDD for ADC2 accuracy. This page consolidates distributor pricing, pin-compatible alternatives within the PIC18 K42 family, and practical design guidance - a synthesis that goes beyond the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47Q10-E/MP - 8-bit 64MHz 128KB Flash MCU 40-QFN
PIC18F47Q10-E/MP

PIC18F47Q10-E/MP - 8-bit 64MHz 128KB Flash MCU 40-QFN

The Microchip Technology PIC18F47Q10-E/MP is an 8-bit PIC18F microcontroller with Functional Safety (FuSa) capability, 128 KB of Flash program memory and a 64 MHz maximum CPU clock, housed in a 40-pin QFN (5x5 mm) package. The device combines high computational performance with 5V operation for increased noise immunity, configurable peripherals, and integrated intelligent analog peripherals, making it optimized for robust real-time control and sensor node applications. What is a PIC18 microcontroller? The PIC18 family is Microchip's high-performance 8-bit microcontroller line based on an enhanced Harvard architecture with 16-bit instructions, advanced peripherals and self-programming Flash. It belongs to the broader category of microcontrollers (MCU) -> 8-bit MCUs -> PIC MCUs -> PIC18 microcontrollers -> PIC18-Q10 family, providing a balance between compute throughput, peripheral integration and cost-effective embedded design. Functional Safety variants add documentation and features to support IEC 61508 / SIL-2 capable systems. Key features include 128 KB (64K x 16) self-programming Flash, 3.6 KB of SRAM, 1 KB of EEPROM, a 10-bit ADC with up to 35 channels, configurable logic cells (CLCs), complementary waveform generators (CWGs), 5V/3.3V operation, and integrated core-independent peripherals. The 64 MHz operation delivers up to 16 MIPS, while Functional Safety (FuSa) documentation simplifies design for safety-critical industrial systems. The 40-QFN package offers a compact 5x5 mm footprint suitable for space-constrained PCB layouts. Technically, the PIC18F47Q10 uses an enhanced RISC CPU with a hardware multiplier, 31-level stack, and a 16-bit-wide instruction set. Its intelligent analog peripherals include a zero-cross detect, programmable ramp generator and high-speed comparators, while CLCs allow software-free hardware state-machine implementation. The 5V native I/O drives noise-immune interfaces in industrial environments. Typical applications include functional safety industrial control systems, sensor nodes for IoT, motor control with FOC, LED lighting controllers, and appliance control boards. The part is well-suited to BLDC/PMSM motor drive platforms, smart sensor conditioning, and human-machine interface (HMI) panels. When designing with this device, ensure adequate decoupling near VDD/AVDD pins and follow Microchip's Q10 family reference designs for analog layout. For safety-critical designs, follow the FuSa manual and use the device's CRC, WWDT and BOR features. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC18F47Q10-E/P - 8-Bit 64MHz MCU, 128KB Flash, 40-PDIP | Microchip
PIC18F47Q10-E/P

PIC18F47Q10-E/P - 8-Bit 64MHz MCU, 128KB Flash, 40-PDIP | Microchip

The Microchip Technology PIC18F47Q10-E/P is an 8-bit PIC® microcontroller from the PIC18F-Q10 family, integrating 128KB (64K x 16) of Flash program memory in a 40-pin PDIP through-hole package and running at up to 64 MHz CPU clock. It belongs to the Functional Safety (FuSa) MCU lineup and operates from 1.8V to 5.5V with 5V tolerance on digital I/O for increased noise immunity in industrial environments. Core peripherals include configurable logic cells (CLCs), high-endurance Flash, and intelligent analog peripherals optimized for real-time control and sensor-node designs. A PIC18 microcontroller is an 8-bit Harvard-architecture MCU family from Microchip Technology. PIC18 devices sit at the top of the 8-bit portfolio above the PIC16 and PIC10/12 families, sharing the same instruction set but offering higher performance, more memory, and richer peripherals. Within the power-management hierarchy, PIC18 MCUs are commonly used as supervisory controllers - handling housekeeping, sensor conditioning, and protocol bridging - while downstream components such as LDOs (e.g., TPS7A4701), voltage supervisors, and DC-DC converters supply regulated power rails to the MCU and its loads. Key features include 128KB Flash with high-endurance Program Flash Memory, 3615 bytes of RAM, 1024 bytes of EEPROM, an integrated 10-bit ADC, multiple PWM/Capture/Compare modules, Configurable Logic Cells (CLCs) for hardware-based logic without software overhead, and communication peripherals (EUSART, I2C, SPI). The device supports up to 36 I/O pins, an on-board 8-bit DAC, and zero-crossing detection - useful for dimmers, motor control, and switched-mode power supply feedback loops. The PIC18F47Q10 uses Microchip's enhanced mid-range core with a modified Harvard architecture, single-cycle access to Flash and SRAM, and an internal 64 MHz oscillator. The combination of CLCs, peripheral pin select (PPS), and math accelerator (8x8 hardware multiplier) allows the CPU to offload deterministic logic functions to hardware, freeing cycles for closed-loop control math at 16-bit fixed-point precision. Typical applications include industrial sensor nodes, appliance control boards, low-cost motor control (BLDC, stepper), LED lighting drivers with dimming, smart metering, USB device controllers, and consumer IoT end nodes. The wide 1.8V-5.5V supply range makes the part a drop-in upgrade for legacy 5V designs while still supporting modern 3.3V rails. When designing with this device, ensure decoupling follows Microchip's application note AN2308 with at least one 100 nF X7R cap per VDD pin pair placed within 5 mm of the pin. The -E suffix denotes an extended operating temperature range of -40 °C to +125 °C, so verify thermal budget in sealed enclosures. Programming is via ICSP using PGC/PGD; do not float MCLR in-circuit. This page synthesizes distributor pricing, drop-in alternatives in the same 40-pin PDIP footprint, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47Q10-I/P - 8-Bit 64MHz 128KB Flash MCU | Microchip
PIC18F47Q10-I/P

PIC18F47Q10-I/P - 8-Bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F47Q10-I/P is an 8-bit PIC microcontroller from the PIC18F-Q10 family, integrating 128 KB of Flash program memory, 3.6 KB of RAM, and 256 B of EEPROM in a 40-pin PDIP package. It operates at up to 64 MHz with a wide 1.8V–5.5V supply range, making it well-suited to 5V systems where noise immunity is a hard requirement. Functional Safety (FuSa) diagnostics and a peripheral set aimed at real-time closed-loop control are positioned for sensor-rich, safety-conscious applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the broader semiconductor taxonomy, the PIC18F47Q10 sits in the 8-bit MCU segment, which remains dominant in cost-sensitive, deterministic, low-power embedded designs. The PIC18 family, the highest-performance 8-bit tier in Microchip's PIC line, adds hardware multiply and C-compiler-friendly extensions on top of the baseline PIC16 architecture, while the Q10 sub-family specifically layers 5V noise immunity and integrated Intelligent Analog peripherals on top. Headline features include a 10-bit ADC with up to 35 channels, a 5-bit DAC, two comparators, configurable logic cells (CLCs), complementary waveform generators (CWG), multiple PWM/CCP/SCCP channels, a hardware scan/CRC engine, a windowed watchdog (WWDT), and zero-cross detection (ZCD). The 5V core operation gives clean logic levels in electrically noisy industrial environments where 3.3V-only MCUs can be marginal. The internal architecture uses a modified Harvard design with separate program and data buses, allowing simultaneous instruction fetch and operand access. This dual-bus design, combined with a hardware multiply and a 16-bit instruction word, delivers 8 MIPS performance at 64 MHz - enough for closed-loop control, sensor fusion, and protocol handling in the same firmware loop. Typical applications include industrial sensor nodes, building automation controllers, low-cost BLDC/PMSM motor drivers (using the CWG + PWM combination), functional-safety appliances, white goods, and USB-free human-machine interface boards. Real-time sensor-edge designs that need deterministic response times benefit most from the Q10 family. When designing with this MCU, respect the 5.5V absolute-maximum supply and derate the analog references accordingly. Use decoupling caps as close as possible to each VDD/VSS pair, and configure unused pins as outputs low rather than inputs to minimise sleep-mode current. This page synthesises distributor pricing, drop-in alternatives, and design notes that go beyond what the datasheet alone gives a typical engineer.

見積もり お問い合わせ
PIC18F47Q43-E/MP - 64MHz 128KB Flash 8-bit MCU | Microchip
PIC18F47Q43-E/MP

PIC18F47Q43-E/MP - 64MHz 128KB Flash 8-bit MCU | Microchip

The Microchip PIC18F47Q43-E/MP is a 64 MHz 8-bit PIC microcontroller with 128 KB Flash, 8 KB SRAM and 1 KB EEPROM, packaged in a 40-pin QFN (5x5 mm). The "-E" suffix denotes the extended (-40C to +125C) operating temperature grade and "/MP" denotes the QFN-EP package option. The PIC18F47Q43 family integrates six DMA controllers, three 16-bit dual PWMs (six PWM outputs), a 12-bit ADC with computation (ADCC) and an 8-bit DAC into a single device. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), non-volatile storage (EEPROM) and a rich set of peripherals. The PIC18 family is Microchip's 8-bit architecture that adds a hardware multiplier, linear SRAM addressing and C-friendly architecture to the classic PIC16 baseline. MCUs sit in the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit, and the PIC18F47Q43 sits in the low-power, high-performance branch of that tree. Key features of the PIC18F47Q43-E/MP include eXtreme Low Power (XLP) technology for battery applications, six independent DMA channels that move data without CPU intervention, configurable logic cells (CLCs) for custom hardware glue logic, vectored interrupts with selectable priority, and a functional-safety (FuSa) capable architecture for safety-critical designs. The ADCC supports automated averaging, threshold comparison and oversampling, offloading common signal-conditioning tasks from the CPU. Typical applications for the PIC18F47Q43-E/MP include real-time motor control (BLDC, stepper, PFC), digital power conversion (digital PFC, LLC, buck/boost), IoT edge sensing nodes, lighting controls, and functional-safety subsystems. The 128 KB Flash and 8 KB RAM provide ample headroom for the math-intensive state machines used in modern digital-power firmware. When designing with this device, ensure the QFN-EP package's exposed pad is soldered to a sufficient ground copper pour for thermal dissipation. The PIC18F47Q43 runs from 1.8V to 5.5V VBAT/VDD; an external decoupling network (1 uF + 100 nF) on each supply pin is recommended. This page consolidates distributor pricing, drop-in same-package alternatives and practical design notes that supplement the manufacturer datasheet.

見積もり お問い合わせ
PIC18F47Q43-E/P - 8-bit 64MHz 128KB FLASH XLP MCU | Microchip
PIC18F47Q43-E/P

PIC18F47Q43-E/P - 8-bit 64MHz 128KB FLASH XLP MCU | Microchip

The Microchip PIC18F47Q43-E/P is an 8-bit PIC microcontroller from the PIC18-Q43 family, featuring 128 KB of FLASH program memory and 64 MHz operation speed, housed in a 40-pin PDIP through-hole package. It combines the popular PIC18 architecture with Core Independent Peripherals (CIPs) and a Functional Safety (FuSa) feature set, targeting real-time control and low-power applications. What is a PIC18 microcontroller? A PIC18 microcontroller is a high-performance 8-bit Harvard-architecture MCU from Microchip Technology, built on enhanced instruction set with hardware multiply and 31-level stack. It belongs to the broader category of 8-bit microcontrollers within the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor. The PIC18 family bridges legacy 8-bit designs and modern peripherals, offering DMA, configurable logic cells (CLCs), 16-bit PWMs, and an Analog-to-Digital Converter with Computation (ADCC) for sophisticated hardware customization with reduced firmware load. The PIC18F47Q43-E/P features 128 KB FLASH, 8192 bytes RAM, 1024 bytes EEPROM, an 8-bit instruction word, and operates from 2.3V to 5.5V. It integrates six DMA controllers, three 16-bit dual PWMs (six PWM outputs total), CLCs, an ADCC, multiple UART/SPI/I2C peripherals, a Zero-Cross Detect module, and a 1.024V/2.048V/4.096V Fixed Voltage Reference. Its nanoWatt XLP technology provides ultra-low sleep current for battery-powered designs. Typical applications include IoT sensor nodes, motor control, LED lighting controllers, and human-machine interface (HMI) panels. The Q43 family's CIPs allow designers to offload tasks such as signal conditioning, waveform generation, and inter-peripheral triggers from the CPU, enabling deterministic real-time response. When designing with this part, ensure decoupling with 100 nF ceramic capacitors on each VDD pin and a 10 µF bulk capacitor near the IC. Use the on-chip debugger (ICD) for in-circuit firmware development, and select the appropriate Configuration Words (CONFIG) for oscillator, watchdog, and code protection settings per the datasheet. This page synthesizes distributor pricing, drop-in alternatives from the same PIC18-Q43 family, and practical design notes not collected in any single manufacturer PDF.

見積もり お問い合わせ
PIC18F47Q43-E/PT - 8-bit 64MHz 128KB Flash MCU 44-TQFP | Microchip
PIC18F47Q43-E/PT

PIC18F47Q43-E/PT - 8-bit 64MHz 128KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F47Q43-E/PT is a 64 MHz 8-bit PIC microcontroller with 128 KB Flash, 8 KB SRAM and 1 KB EEPROM, housed in a 44-pin TQFP (10x10 mm) package. The PIC18F27/47/57Q43 family combines Core Independent Peripherals (CIPs) such as six DMA controllers, configurable logic cells (CLCs), 16-bit dual PWMs, a 12-bit ADC2 with computation and an 8-bit DAC, enabling sophisticated hardware customization without software overhead. What is a PIC18 microcontroller? A PIC18 is an 8-bit enhanced Harvard-architecture microcontroller from Microchip Technology, sitting in the product hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. PIC18 devices are designed for low-power, high-performance mixed-signal applications and serve as the higher end of Microchip's 8-bit portfolio, bridging to the 16-bit PIC24/dsPIC and 32-bit PIC32 families when more performance is needed. Key features of the PIC18F47Q43-E/PT include 36 capacitive touch sensing channels via the on-chip mTouch peripheral, vectored interrupts with programmable priority and fixed 3-cycle latency, six DMA controllers that move data between peripherals and memory without CPU involvement, and a peripheral pin select (PPS) module that remaps digital I/O to a wide range of physical pins. Functional safety (FuSa) features target IEC 61508 SIL applications, and XLP (eXtreme Low Power) technology with nanoWatt XLP keeps active current in the microamp range. The 64 MHz internal core delivers approximately 16 MIPS of processing throughput, supported by the C-compiler-optimized PIC18 instruction set. Memory protection includes a code-protect option, a hardware CRC/SCAN module, and a windowed watchdog timer (WWDT) for safety-critical firmware. The device operates from 1.8 V to 5.5 V across an industrial temperature range. Typical applications include industrial sensing and IoT edge nodes, motor and power-conversion control loops using the 16-bit PWM and high-speed ADCC, capacitive touch user interfaces, functional-safety sensor transmitters, and low-power battery-powered instruments such as remote controls and metering. When designing with the PIC18F47Q43-E/PT, use MPLAB X IDE with the free XC8 compiler and MPLAB Code Configurator (MCC) for graphical peripheral setup. Place a 100 nF decoupling capacitor on every VDD/VSS pair and follow Microchip AN2586 for PCB layout of mixed-signal 8-bit designs. This page synthesizes distributor pricing, drop-in package alternatives and practical design notes not found in the manufacturer datasheet, helping procurement and firmware engineers shorten evaluation cycles for the PIC18-Q43 family.

見積もり お問い合わせ
PIC18F47Q43-I/P - 128KB Flash 8-Bit MCU 64MHz 40-PDIP | Microchip
PIC18F47Q43-I/P

PIC18F47Q43-I/P - 128KB Flash 8-Bit MCU 64MHz 40-PDIP | Microchip

The Microchip Technology PIC18F47Q43-I/P is an 8-bit PIC® XLP™ microcontroller with 128 KB Flash, 8 KB SRAM, and 1 KB EEPROM, running at up to 64 MHz, housed in a 40-pin PDIP through-hole package. The -I suffix denotes the industrial -40C to +85C temperature range and the /P suffix denotes the PDIP-40 package. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash), volatile working memory (SRAM), EEPROM for data retention, and a rich set of on-chip peripherals. The PIC18F47Q43 belongs to Microchip's enhanced 8-bit PIC18 family, which fits in the hierarchy: PIC18 -> 8-bit MCU -> microcontroller -> embedded computing IC -> semiconductor. XLP™ (eXtreme Low Power) is Microchip's branding for nanoWatt technology that enables deep sleep currents down to the nanoampere range. Key features of this device include a 12-bit ADC with Computation (ADCC) supporting capacitive touch via CVD, a 5-bit DAC, three comparators, two 10-bit PWMs and three 16-bit dual PWMs, six DMA controllers, configurable logic cells (CLCs), complementary waveform generators (CWG), zero-cross detect (ZCD), a windowed watchdog timer (WWDT), and SCAN/CRC hardware acceleration. Five UARTs (one LIN/DMX/DALI-capable), two SPI, two I2C, and a 16-bit timer complement the peripheral mix. The PIC18-Q43 architecture separates the CPU bus from the peripheral bus, allowing DMA-driven peripheral-to-peripheral and peripheral-to-memory transfers without CPU intervention. This is well suited to real-time control loops in motor control, lighting, and power conversion where deterministic timing is required. The functional safety (FuSa) features target IEC 61508 SIL capable applications. Typical applications for this part include industrial sensor signal conditioning, LED lighting controllers with smooth dimming, small BLDC/PMSM motor controllers, capacitive touch user interfaces, building automation nodes, and low-power IoT edge nodes. The wide peripheral set reduces external component count and BOM cost. When designing with this MCU, allocate the 40 pins carefully: many peripherals are remappable via PPS (Peripheral Pin Select), but only a subset of pins support PPS output routing. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each pin pair, and provide an analog AVSS/AVDD pair for the ADC/DAC. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that are not found in the manufacturer datasheet, giving procurement and design engineers a single decision-ready reference.

見積もり お問い合わせ
PIC18F47Q43T-I/MP - 128KB Flash 8-bit MCU | Microchip
PIC18F47Q43T-I/MP

PIC18F47Q43T-I/MP - 128KB Flash 8-bit MCU | Microchip

The Microchip Technology PIC18F47Q43T-I/MP is an 8-bit PIC microcontroller operating at up to 64 MHz, with 128 KB Flash program memory, 8 KB SRAM, and 1 KB EEPROM, housed in a 40-pin QFN (5x5 mm) package with tape and reel packaging. It belongs to the PIC18-Q43 family featuring Core Independent Peripherals (CIPs), advanced interconnection capabilities, and Functional Safety (FuSa) support, and is supplied in industrial temperature grade -40C to +85C. What is an 8-bit microcontroller? An 8-bit MCU is a programmable microcontroller that uses an 8-bit data bus as its core processing unit, and belongs to the broader category of microcontrollers -> embedded processors -> semiconductor ICs. Within the PIC18 family, the Q43 line targets functional safety, XLP (eXtreme Low Power), and hardware customization through configurable logic and interconnected CIPs. Compared with 16- or 32-bit MCUs, an 8-bit PIC like the PIC18F47Q43T-I/MP excels in deterministic interrupt response, simple peripheral integration, and very low active and sleep power budgets. Key features include 12-bit ADC2 with computation, 5-bit DAC, comparators with 16-bit PWM, hardware limit timer (HLT), windowed watchdog timer (WWDT), CRC/SCAN, zero-cross detect (ZCD), and Peripheral Pin Select (PPS) that allows most digital I/O to be remapped to a wide range of device pins. The 8-bit PIC18 CPU delivers 64 MHz operation with up to 16 MIPS throughput, while keeping peripheral activity possible in IDLE and DOZE modes. The architecture combines a RISC core with hardware CIP blocks, eliminating many software loops and shrinking firmware size. Functional Safety support (FuSa) and XLP technology with sub-uA sleep currents make the device attractive in safety-critical and battery-powered designs. Internal 64 MHz oscillator accuracy (1% typical) supports both USB-friendly and timing-sensitive implementations without an external crystal. Typical applications include industrial sensor conditioning nodes, IoT edge nodes with secure boot, automotive body and accessory modules, consumer appliances with HMI control, low-power motor and LED drivers, and medical measurement instrument peripherals. The combination of 128 KB Flash, 8 KB RAM, and rich analog/peripheral mix fits mid-range embedded products. When designing with this device, allocate PCB area for the 40-QFN thermal pad, which must be soldered to the ground plane for thermal and electrical performance. Route the PGC/PGD lines short and shielded for robust in-circuit serial programming (ICSP), and reserve RE3/MCLR as the reset pin with proper external pull-up. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ collected from manufacturer documentation - giving engineers a faster reference than the datasheet alone.

見積もり お問い合わせ
PIC18F47Q83-E/P - 8-bit MCU 128KB Flash CAN DIP-40 | Microchip
PIC18F47Q83-E/P

PIC18F47Q83-E/P - 8-bit MCU 128KB Flash CAN DIP-40 | Microchip

The Microchip Technology PIC18F47Q83-E/P is an 8-bit PIC microcontroller from the PIC18-Q83 family, featuring 128 KB of Flash program memory, 13 KB of SRAM, 1 KB of EEPROM, and an integrated Controller Area Network (CAN) peripheral in a 40-pin PDIP through-hole package. It operates at up to 64 MHz across an extended temperature range of -40C to +125C, and integrates a 12-bit ADC3, DAC, DSM (Digital Signal Modulator), multiple PWM channels, and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The 40-pin DIP form factor supports breadboard prototyping and legacy socketed designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data-path CPU core with on-chip Flash, RAM, and peripherals. Within the broader semiconductor taxonomy, an MCU belongs to the microcontroller family, which is itself a subset of microprocessors and embedded computing devices. The PIC18-Q83 family extends Microchip's CIP concept - hardware blocks such as CLC, NCO, PWM, DSM, and CRC/SCAN that execute state-machine logic without CPU intervention - to include a CAN FD peripheral, eliminating the need for an external CAN controller. Key features include 36 configurable I/O pins, hardware math accelerator support via CIP, 5 CCP/PWM channels, two UART, two SPI, two I2C, and a 12-bit differential ADC. The integrated CAN FD controller supports ISO 11898-1 and ISO 11898-2, enabling high-throughput industrial and automotive networking. Low-power features include Idle, Doze, and peripheral module disable modes, plus a power-saving Sleep mode with fast wake-up. Typical applications include CAN-based industrial control nodes, automotive body and chassis ECUs, sensor fusion gateways, small-form-factor PLCs, and protocol-conversion bridges. The DIP-40 package is preferred for prototypes, field-replaceable modules, and educational platforms where through-hole soldering is required. When designing with the -E/P variant, observe the 5.5 V maximum VDD rating and use 1% decoupling capacitors within 5 mm of every VDD/VSS pair. The internal 64 MHz HFINTOSC eliminates external crystal cost, but for CAN bus timing accuracy an external crystal is recommended. Migrating from -E/P to -E/PT (TQFP-44) requires no firmware change but PCB layout rework. This page synthesizes distributor pricing, pin-compatible CIP-enabled drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC18F47Q83-E/PT - 8-bit 64MHz 128KB Flash MCU | Microchip
PIC18F47Q83-E/PT

PIC18F47Q83-E/PT - 8-bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F47Q83-E/PT is an 8-bit PIC18 microcontroller from the PIC18-Q83 family, integrating 128KB of Flash, 13KB of SRAM, and 1KB of EEPROM in a 44-pin TQFP (10x10 mm) package. It runs at 64 MHz across an 8-bit data path with a CAN bus controller and an extensive array of Core Independent Peripherals (CIPs). A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable I/O peripherals. The PIC18 family sits at the upper end of Microchip's 8-bit portfolio, combining a RISC-like 16-bit instruction word with rich interrupt handling and modular peripherals. Within the broader power-management and embedded-control taxonomy, an 8-bit MCU is positioned as a low-cost, deterministic controller for node-level intelligence, gateway bridging, and human-machine interfaces that do not require the throughput of 32-bit Cortex-M parts. Key features include 128KB of self-programmable Flash, 13KB of SRAM, 1KB of EEPROM, a 12-bit ADC3 with computation, a 5-bit DAC, a Device Service Module (DSM), PWM peripherals, and serial interfaces including I2C, SPI, and UART alongside the CAN bus. The CIPs allow hardware-level state machines for timer, PWM, and signal conditioning without CPU intervention, which reduces firmware complexity and improves deterministic response. Operating voltage spans 1.8V to 5.5V across the -40C to +125C extended industrial temperature range. The Q83 architecture pairs an 8-bit data path with a 16-bit instruction set and hardware multiplier, suitable for sensor fusion, motor control loops, and CAN node bridging in industrial and automotive subsystems. The 44-pin TQFP gives designers 36+ I/O lines, multiple analog channels, and high-current sink/source capability for direct LED and relay drive. Typical applications include CAN node endpoints, sensor signal conditioning, lighting controllers, and appliance HMI boards. For designs requiring higher pin count or USB, the Q83 family extends to 48-pin QFN variants. When designing with this device, use the MPLAB X IDE and XC8 compiler; reserve adequate decoupling on AVDD/VDD pairs and ensure the CAN transceiver shares a common ground return with the MCU for EMI compliance. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers evaluating PIC18-Q83 vs K42 or Q43 families should consult the comparison_table below to weigh CIP availability against pin count.

見積もり お問い合わせ
PIC18F47Q83-I/P - 8-bit 64MHz 128KB Flash MCU | Microchip
PIC18F47Q83-I/P

PIC18F47Q83-I/P - 8-bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F47Q83-I/P is an 8-bit PIC microcontroller from the PIC18-Q83 family operating at up to 64 MHz, featuring 128 KB of Flash program memory, 13 KB of SRAM, and 1 KB of Data EEPROM in a 40-pin PDIP through-hole package. The device integrates an extensive set of Core Independent Peripherals (CIPs) including a 12-bit ADC, a 12-bit DAC, a Digital Signal Modulator (DSM), multiple PWM modules, and a built-in CAN 2.0B controller for industrial and automotive networking. An 8-bit microcontroller (MCU) is a single-chip computer that uses an 8-bit data bus architecture, combining a CPU, memory, and configurable peripherals on a single silicon die. Within the broader semiconductor taxonomy, an MCU belongs to the microcontroller family, which sits under embedded processors and semiconductors. The PIC18 family specifically targets cost-optimized general-purpose embedded designs that benefit from deterministic instruction execution and a rich peripheral set without the overhead of higher-bit architectures. Key features of the PIC18F47Q83 include up to 36 I/O pins, multiple communication interfaces (I2C, SPI, UART), DMA, two comparators, two watchdog timers, and nine timers. The integrated CAN module makes it well-suited for industrial nodes that previously required an external CAN transceiver companion IC, while the 12-bit ADC and DAC reduce the bill of materials for sensor-conditioning and analog-output designs. The architecture uses Microchip's enhanced mid-range 8-bit CPU core with hardware multiply and a 16-bit instruction word, providing a balance of code density and execution speed. With 128 KB of self-programmable Flash, the device supports field firmware updates via the bootloader-friendly architecture and ICSP (In-Circuit Serial Programming) interface. Typical applications include industrial sensor nodes, automotive body and lighting controllers (CAN-connected), appliance control boards, building automation, and low-cost instrumentation. The wide operating voltage range and integrated peripherals make it especially useful in designs that previously required multiple discrete ICs to achieve CAN connectivity plus analog signal conditioning. When designing with this device, plan for a robust decoupling strategy (100 nF plus 10 uF bulk), keep CAN bus traces short and impedance-controlled, and reserve the ICSP/PGD/PGC pins for in-system programming access. The PDIP-40 footprint is breadboard-friendly, simplifying prototyping before moving to surface-mount variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not consolidated on a single datasheet page, giving engineers a faster path from selection to prototype.

見積もり お問い合わせ
PIC18F47Q83-I/PT - 64MHz 128KB Flash CIP MCU | Microchip
PIC18F47Q83-I/PT

PIC18F47Q83-I/PT - 64MHz 128KB Flash CIP MCU | Microchip

The Microchip Technology PIC18F47Q83-I/PT is a 64 MHz 8-bit PIC18 microcontroller with 128 KB Flash, 13 KB SRAM and 1 KB EEPROM, integrated into a 44-pin TQFP (10x10 mm) industrial-temperature package. It combines the PIC18 enhanced mid-range core with Core Independent Peripherals (CIPs) and a hardware CAN FD controller for robust in-vehicle and industrial networking. The device operates from 2.5 V to 5.5 V across the industrial -40C to +85C range and is housed in a TQFP-44 package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral subsystems on one silicon die. The PIC18 architecture belongs to the modified Harvard 8-bit family, where program and data memory use separate buses for predictable instruction throughput. Within the broader taxonomy, the PIC18F47Q83 sits between general-purpose 16-bit MCUs and 32-bit ARM Cortex-M parts - offering higher peripheral integration than baseline PIC16 devices while keeping the deterministic interrupt model of the PIC18 core. The PIC18F47Q83 targets CAN-connected and CIP-driven designs where software offloading to hardware saves code space and CPU cycles. Key features include 128 KB self-programmable Flash with device firmware upgrade support, 13 KB SRAM, 1 KB EEPROM, 36 MHz internal oscillator (HFINTOSC) and PLL, hardware CAN FD peripheral, up to 35 channels of 12-bit ADC with computation, 5-bit/8-bit DAC, op-amp core, configurable logic cells (CLC), DMA, multiple UART/SPI/I2C, and 10-bit/12-bit PWM with complementary outputs. The 44-pin TQFP exposes 36 I/O pins with 5V-tolerant digital interfaces. Typical applications include industrial automation controllers, automotive body and sensor ECUs, appliance and white-goods control boards, IoT gateways with CAN node connectivity, and battery management systems requiring deterministic CAN traffic. When designing with this device, ensure proper decoupling (100 nF ceramic plus bulk) on each VDD/VSS pair, follow Microchip AN1255 for Q83 family CIP configuration, and reserve a dedicated CAN transceiver footprint such as the MCP2562FD.

見積もり お問い合わせ
PIC18F47Q83T-I/PT - 128KB Flash 8-bit MCU w/ CAN | Microchip
PIC18F47Q83T-I/PT

PIC18F47Q83T-I/PT - 128KB Flash 8-bit MCU w/ CAN | Microchip

The Microchip Technology PIC18F47Q83T-I/PT is a 64 MHz 8-bit PIC microcontroller with 128 KB Flash, 13 KB SRAM, and 1 KB EEPROM, housed in a 44-pin TQFP (10x10 mm) tape-and-reel package. It integrates Core Independent Peripherals (CIPs) including a CAN FD controller, a 12-bit ADC with Computation (ADC2), a 5-bit DAC, DSM (Data Signal Modulator), PWM modules, and CIPS, alongside I2C, SPI, and UART serial interfaces. An 8-bit PIC microcontroller (MCU) is a Harvard-architecture RISC processor widely used in embedded control for its deterministic instruction execution, low power consumption, and rich peripheral integration. Within the broader MCU taxonomy, 8-bit MCUs sit below 16-bit and 32-bit Cortex-M devices in computational capability but excel in cost-sensitive, real-time control applications. The PIC18 family adds enhanced peripherals, larger memory, and C compiler support (MPLAB XC8) while remaining pin-compatible with the legacy PIC16 baseline, making it a workhorse for industrial, automotive, and IoT designs. Key features of the PIC18F47Q83T-I/PT include 128 KB self-programmable Flash with device ID protection, a 10-bit slope ADC2 with automated averaging, oversampling, and threshold comparison, a 5-bit DAC with internal reference, and four 16-bit PWM outputs. The device also exposes 36 digital I/O pins, four CWG (Complementary Waveform Generator) channels, and a Hardware Limit Timer for deterministic motor and lighting control. Operating voltage is 2.5 V to 5.5 V, and the operating temperature range is -40C to +85C (industrial grade). The PIC18F47Q83 architecture combines the legacy PIC18 instruction set with modern CIP blocks, allowing developers to offload logic such as signal conditioning, motor commutation, and protocol handling from the CPU. The device supports up to 64 MHz operation from an internal 64 MHz HFINTOSC, eliminating external crystals in many designs, and integrates a CAN FD peripheral for automotive and industrial networking. Typical applications include CAN node endpoints in industrial automation, BLDC motor control, LED lighting drivers, IoT sensor hubs, and USB-to-CAN bridges. The combination of CAN FD, PWM, and ADC2 with computation makes the PIC18F47Q83 particularly well-suited to sensor-rich, real-time control systems. When designing with this MCU, budget carefully for the 44-pin TQFP footprint's thermal envelope. Although the part is low-power (typical active current below 10 mA at 64 MHz), high GPIO toggle rates and ADC sampling can raise junction temperature in enclosed housings. Decouple VDD with 100 nF ceramic caps adjacent to each power pin, and reserve RA5 as MCLR with a 10 kohm pull-up per Microchip's recommendation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster sourcing and design decisions.

見積もり お問い合わせ