マイクロコントローラ

製品 (18744)

ATSAMD51N19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51N19A-AUT-EFP

ATSAMD51N19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip ATSAMD51N19A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with 512 KB Flash and 192 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package with USB, CAN-FD, and I2S peripherals. Operating from 1.71 V to 3.63 V, it integrates a Floating Point Unit, hardware multiplier, and a high-speed 12-bit ADC suitable for mixed-signal embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces on a single die. The Cortex-M4F specifically is a 32-bit RISC core with DSP extensions and a single-precision FPU, positioned in the ARM hierarchy as Cortex-M4 -> Cortex-M -> ARMv7-M architecture -> ARM. The SAM D51 family sits above the SAM D21 (Cortex-M0+) and below the SAME70 (Cortex-M7) in Microchip's portfolio, targeting mid-to-high performance applications that need DSP and FPU capability without the cost of an M7. Key features include 120 MHz CPU with 32-bit FPU, 512 KB Flash with ECC (dual-panel for live updates), 192 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, USB 2.0 Full Speed with on-chip transceiver, CAN-FD, SDHC, I2S, and SERCOM configurable serial interfaces. The device supports sleep modes with fast wakeup for low-power IoT applications. The ATSAMD51N19A uses a Cortex-M4F core with tightly-coupled SRAM for deterministic interrupt response. The dual-panel Flash enables fail-safe firmware updates (one panel runs while the other is reprogrammed), making it suitable for systems that demand high availability. Cryptographic acceleration options include AES and True Random Number Generator on related family members. Typical applications include industrial IoT gateways, USB peripherals such as HID and CDC devices, motor control with FOC algorithms, audio processing via I2S, and CAN-FD nodes in automotive and industrial networks. Its 120 MHz FPU accelerates sensor fusion and DSP workloads. When designing with this MCU, plan PCB layout for the 100-pin TQFP with 0.5 mm pitch, route the VDDCORE decoupling close to the pins, and ensure the 32.768 kHz crystal load capacitance matches the chosen crystal to maintain accurate RTC timing. This page synthesizes distributor pricing, same-package drop-in alternatives in the SAM D51/DSAM E51 family, and practical design notes not consolidated on a single manufacturer page.

見積もり お問い合わせ
ATSAMD51N20A-AF - 120MHz Cortex-M4F 1MB MCU | Microchip
ATSAMD51N20A-AF

ATSAMD51N20A-AF - 120MHz Cortex-M4F 1MB MCU | Microchip

The Microchip Technology ATSAMD51N20A-AF is a high-performance 32-bit ARM Cortex-M4F microcontroller with FPU, running up to 120 MHz, integrating 1 MB Dual-Panel Flash with ECC and 256 KB SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) package for extended-temperature applications. What is a Cortex-M4F microcontroller? A microcontroller unit (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), peripherals (timers, ADC, communication controllers), and I/O in one package. The Cortex-M4F is ARM's mainstream core with a single-precision Floating Point Unit, DSP extensions, and an MPU for memory protection. MCUs sit at the bottom of the compute hierarchy (transistor -> logic gate -> processor -> SoC -> computer) and are the backbone of every embedded system from wearables to industrial controllers. Key features include 120 MHz core clock with FPU and DSP instructions, 1 MB dual-panel Flash supporting live in-field update with ECC, 256 KB SRAM with ECC, a full-speed USB 2.0 interface with integrated PHY, dual CAN-FD controllers, and a 12-bit 1 MSPS ADC with up to 16 channels. A high-speed 16-bit Analog Comparator, multiple SERCOM peripherals (configurable as UART/SPI/I2C), an Event System, and a TC capture/compare/PWM block round out the peripherals. The SAM D51 architecture pairs the Cortex-M4F core with a multi-layer bus matrix and tightly-coupled SRAM to deliver deterministic interrupt response under heavy peripheral traffic. Dual-panel Flash with ECC enables live firmware swap without external memory, ideal for OTA-capable field devices requiring high reliability. Typical applications include industrial motor control, USB-enabled human-machine interfaces, building automation gateways, and audio/signal-processing front-ends. The 100-pin TQFP footprint and extended temperature grade (suffix "F") suit through-hole-friendly prototypes and harsh-environment deployments. When designing with this MCU, ensure the dual-panel Flash update sequence uses the proper BFB2 / BOOTPROT locking scheme, place the on-package decoupling network within 2 mm of each VDD pin pair, and route the USB DP/DM traces as a 90-ohm differential pair. The "AF" suffix denotes the 100-pin TQFP package and extended temperature grade (-40 C to +125 C). This page synthesizes distributor pricing, drop-in alternatives within the SAM D51/E51 family, and practical design notes that go beyond the datasheet summary to support schematic and layout planning.

見積もり お問い合わせ
ATSAMD51N20A-AFT - 120MHz Cortex-M4F 1MB Flash MCU | Microchip
ATSAMD51N20A-AFT

ATSAMD51N20A-AFT - 120MHz Cortex-M4F 1MB Flash MCU | Microchip

The Microchip Technology ATSAMD51N20A-AFT is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, integrating a Floating Point Unit (FPU) and DSP extensions, running at up to 120 MHz, with 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC. It comes in a 100-pin TQFP (14x14 mm) package rated for the -40C to +125C extended industrial temperature range, and includes a USB 2.0 Full-Speed device/host interface, multiple SERCOM serial channels, a 12-bit ADC, a 12-bit DAC, and a CAN-FD controller. According to the Microchip SAM D5X/E5X family datasheet (DS60001507D), the ATSAMD51N20A-AFT targets general-purpose applications requiring high computational throughput and rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable I/O peripherals. The ATSAMD51N20A-AFT belongs to the ARM Cortex-M4F family, a 32-bit processor architecture that adds hardware single-precision floating-point acceleration and DSP instructions to the Cortex-M4 baseline. Within the broader taxonomy, this part is a Cortex-M4 microcontroller -> ARM 32-bit MCU -> embedded processor -> semiconductor IC. Its Cortex-M4F core sits between the Cortex-M3 (no FPU) and the Cortex-M7 (higher performance, also with FPU), offering a balanced trade-off of speed, power, and DSP capability. Key features include the 120 MHz Cortex-M4F core, 1 MB of dual-bank Flash that enables live firmware updates with rollback, 256 KB SRAM with ECC for reliability, an on-chip USB 2.0 Full-Speed device/host port, configurable SERCOM peripherals (UART/SPI/I2C), a 12-bit ADC with up to 16 channels, a 12-bit DAC, and a CAN-FD controller. The integrated Event System and Peripheral Event Controller enable deterministic inter-peripheral signalling without CPU load. Security and reliability features include ECC on Flash and SRAM, a True Random Number Generator (TRNG), secure boot, and cryptographic accelerators. Typical applications include IoT edge nodes, industrial motor control, USB peripherals, audio processing, smart sensor hubs, and human-machine interface (HMI) panels. The 1 MB dual-bank Flash is particularly valuable for products requiring over-the-air firmware updates with rollback capability, and the rich analog and connectivity peripherals suit industrial-grade, fan-less embedded designs. The 100-TQFP package is a mature, hand-solderable footprint friendly to both prototyping and volume production. When designing with this device, ensure the internal core voltage regulator has sufficient bulk capacitance and that the decoupling network follows the SAM D51 reference schematic. For USB applications, place the 48 MHz crystal within 5 mm of the XIN32/XOUT32 pins, and route USB D+/D- as a 90-ohm differential with no stubs. This page synthesizes distributor pricing, drop-in alternatives from the same SAM D5X/E5X family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD51N20A-AU - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip
ATSAMD51N20A-AU

ATSAMD51N20A-AU - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip

The Microchip Technology ATSAMD51N20A-AU is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and up to 256 KB of SRAM with ECC, packaged in a 100-pin TQFP (14x14 mm) industrial-grade -40C to +85C variant. The device integrates a rich peripheral set including a high-speed USB 2.0 interface with embedded PHY, up to six SERCOM channels that can be configured as UART/SPI/I2C, an I2S interface, an SD/MMC host controller, multiple 16-bit timers, a 12-bit 1 MSPS ADC, dual 12-bit DACs, and an analog comparator, plus a capacitive touch hardware accelerator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one silicon die, forming the embedded intelligence in countless products. Within the broader taxonomy, the ATSAMD51N20A-AU is an ARM Cortex-M4F MCU, belongs to the Cortex-M4 class of 32-bit microcontrollers, falls under the microcontroller (MCU) category, and finally under the integrated circuit (IC) family of semiconductors. Microchip's SAM D5x/E5x family extends the lower-pin-count SAM D2x/D1x line with higher performance, more memory, and richer peripherals while maintaining peripheral IP compatibility via SERCOM and Event System. Key features include: ARM Cortex-M4F core with FPU and DSP extensions at up to 120 MHz; 1 MB dual-panel Flash with ECC and 256 KB SRAM with ECC; full-speed and high-speed USB 2.0 with on-chip PHY; six SERCOM serial channels (UART/SPI/I2C/LIN); I2S audio interface, SD/MMC host, and Quad-SPI memory interface; 12-bit 1 MSPS ADC with up to 32 channels, two 12-bit DACs, and three analog comparators; 16-bit and 24-bit timers with PWM, capture, and quadrature decode; 1.71V to 3.6V single supply; and AEC-Q100 qualification on the -AUT suffix variants. The ATSAMD51 uses Microchip's Event System and SERCOM peripherals to route signals directly between peripherals and configurable serial engines, offloading I/O handling from the CPU. The Cortex-M4F with FPU delivers 1.25 DMIPS/MHz and supports single-precision IEEE 754 floating-point in hardware. The dual-panel Flash and ECC-protected SRAM enable safety-critical firmware reliability, while TrustZone-M is supported on the E5x variants but not on the D51 family. Cache and Prefetch buffers accelerate instruction throughput from Flash. Typical applications include: industrial HMI and control panels, USB-equipped embedded devices, IoT edge nodes with crypto, audio playback and processing systems, motor control and FOC motor drives, and home automation hubs. In each, the combination of USB PHY, FPU, large Flash, and ECC memory uniquely fits scenarios requiring deterministic response plus connected peripherals. Design consideration - the ATSAMD51N20A-AU's -AU suffix indicates the 100-pin TQFP package with -40C to +85C industrial temperature range; for AEC-Q100 automotive grade, select the -AUT variant. Use a 10uF plus 100nF decoupling pair close to each VDD pin and keep the 32.768 kHz crystal traces short. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ATSAMD51N20A-AU-EFP - 120MHz Cortex-M4F 1MB MCU | Microchip
ATSAMD51N20A-AU-EFP

ATSAMD51N20A-AU-EFP - 120MHz Cortex-M4F 1MB MCU | Microchip

The Microchip ATSAMD51N20A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision FPU, 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) package. It is part of the SAM D51 family targeted at general-purpose high-performance embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The ATSAMD51N20A-AU-EFP fits in the hierarchy of: ARM Cortex-M4F -> Cortex-M4 family -> ARM Cortex-M -> 32-bit microcontroller -> microcontroller -> integrated circuit -> semiconductor. The "EFP" suffix indicates Extended Flash Performance, improving Flash access timing over the standard -AU grade. Key features include 120 MHz Cortex-M4F core with FPU and DSP extensions, 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, a high-speed USB 2.0 Full-Speed device/host interface, SD/MMC host, CAN-FD, I2S, multiple SERCOM, ADC, DAC, and PTC (Peripheral Touch Controller). The device supports 1.71-3.6 V supply operation and offers low-power Sleep, Standby, and Backup modes. The architecture pairs a Cortex-M4F core with a 6-channel Event System, DMA, and a rich analog front end (dual 12-bit ADC up to 1 Msps, 12-bit DAC, analog comparators). This combination delivers deterministic real-time response for motor control, digital power, and sensor-fusion workloads while running FreeRTOS, Micrium OS, or ASF firmware frameworks natively. Typical applications include IoT edge nodes with USB connectivity, industrial HMI panels, automotive body and infotainment subsystems, USB Type-C power-delivery controllers, audio playback peripherals, and motor-control reference designs. The TQFP-100 footprint simplifies prototyping and hand-rework versus BGA equivalents. When designing with this device, ensure the supply decoupling network follows the SAM D51 hardware reference manual: at least one 100 nF X7R placed within 5 mm of each VDD pin, plus a 4.7 uF bulk capacitor at the VDDIO rail. The 100-pin TQFP has limited thermal dissipation - for sustained 120 MHz operation, populate the exposed pad with at least 1 cm2 of copper pour to ground. This datasheet synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes - all anchored to Microchip's SAM D5X/E5X family datasheet - to provide context the manufacturer PDF does not.

見積もり お問い合わせ
ATSAMD51N20A-AUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51N20A-AUT-EFP

ATSAMD51N20A-AUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51N20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision Floating Point Unit (FPU), housed in a 100-pin TQFP (14x14 mm) package. The device integrates 1 MB of dual-panel Flash with ECC, 256 KB of SRAM with ECC, and a rich set of peripherals including a high-speed USB 2.0 Full-Speed interface, multiple SERCOM, I2S, and a 12-bit ADC. An MCU (Microcontroller Unit) is a single-chip computer integrating CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces on one die. Microcontrollers sit within the embedded computing hierarchy as: MCU -> embedded processor -> semiconductor device. The Cortex-M4F class specifically targets digital signal control with hardware floating point, allowing deterministic real-time performance with DSP extensions. Key features of the ATSAMD51N20A-AUT-EFP include 120 MHz core clock with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, a 12-bit 1 MSPS ADC, two 12-bit DACs, and a high-speed USB 2.0 Full-Speed device/host port. The part supports -40C to +85C industrial temperature range (AUT suffix) and offers low-power Sleep/Standby modes with RTC retention. The "EFP" suffix denotes Extended Flash Performance tuning, and the "T" denotes Tape and Reel packaging. Architecture-wise, the SAM D51 family uses a Harvard bus structure with separate code and data paths to the Flash and SRAM, allowing zero-wait-state execution at 120 MHz. The dual-panel Flash supports simultaneous read-while-write operations, enabling field firmware updates without halting application code. The Cortex-M4F DSP extensions and single-precision FPU accelerate control-loop math and signal processing. Typical applications include industrial IoT gateways, USB audio interfaces, motor control (FOC), smart energy metering, and human-machine interface (HMI) panels. The combination of high-speed USB, large Flash, and DSP-capable core is well matched to audio processing, sensor fusion, and connected industrial nodes. When designing, ensure the 32.768 kHz crystal placement follows the Microchip SAM D51 reference design to maintain USB jitter compliance. Decouple VDDIO and VDDCORE with bulk + 100 nF + 1 nF ceramic capacitors placed within 2 mm of the package pins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found on the manufacturer summary page.

見積もり お問い合わせ
ATSAMD51P19A-AFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51P19A-AFT

ATSAMD51P19A-AFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51P19A-AFT is a 32-bit ARM Cortex-M4F microcontroller with FPU running up to 120 MHz, integrating 512 KB of dual-panel Flash with ECC and 192 KB of SRAM in a 128-pin TQFP (14x14 mm) package. Per Microchip, the SAM D51 high-performance MCU family targets general-purpose applications including IoT endpoints, audio processing, machine learning at the edge, and human-machine interface (HMI) designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The ATSAMD51P19A-AFT extends the baseline Cortex-M4 (an ARM processor with DSP extensions) by adding a single-precision floating-point unit (FPU), making it a Cortex-M4F variant. It sits within the hierarchy: Cortex-M4F -> ARM Cortex-M family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The Cortex-M4F core reaches 1.25 DMIPS/MHz with hardware single-precision FP, enabling efficient DSP and audio codec workloads. Key features include 512 KB Flash with ECC (dual-panel, supporting live update), 192 KB SRAM, a 2 MB embedded SRAM (HSRAM) subsystem with 8 KB tightly-coupled memory, a 12-bit 1 MSPS ADC with up to 16 channels, dual CAN-FD controllers, USB 2.0 Full-Speed with PHY, and SERCOM peripherals configurable as UART/SPI/I2C. A 32-bit audio engine (I2S), 16-bit PWM timers, and an Event System allow deterministic low-latency IO. Cryptographic accelerators for AES, SHA-256, and True Random Number Generator (TRNG) support secure-boot implementations. The SAM D51 architecture uses Microchip's proprietary embedded Flash technology with cache prefetch to maximize instruction throughput at 120 MHz. The peripheral DMA controller (DMAC) can move data between memory and peripherals without CPU intervention, freeing the M4F core for floating-point math-intensive tasks such as FFT/audio filtering or motor-control PID loops. Typical applications include smart-home IoT gateways, industrial sensor aggregation nodes, USB Audio Class (UAC) sound cards, BLDC and stepper motor drives with field-oriented control (FOC), secure-connected consumer devices with OTA firmware updates, and human-machine interface (HMI) panels using TFT displays with capacitive touch via the Parallel Capture Interface (PCL). The integrated CAN-FD makes it directly applicable to automotive body and chassis networking subsets, though not AEC-Q100 qualified at the -AFT suffix (industrial -40 to +125C only). A key design consideration: this 128 TQFP variant is footprint-compatible with the larger-density ATSAMD51P20A and the smaller ATSAMD51P19A - all share the same 14x14 mm TQFP land pattern and pinout, enabling seamless memory migration during board bring-up. Developers should plan for an external 32.768 kHz crystal for RTC accuracy if battery-backed timekeeping is required; the internal 16 MHz DFLL is accurate to about 1% across temperature, suitable for UART baud rates but not for precision RTC. This page synthesizes distributor pricing, same-package Microchip alternates (ATSAME54P19A-AFT, ATSAME51N19A-AUT), and practical design notes for the ATSAMD51P19A-AFT - supplementing what is found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD51P19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB Flash TQFP-128
ATSAMD51P19A-AU-EFP

ATSAMD51P19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB Flash TQFP-128

The Microchip Technology ATSAMD51P19A-AU-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller with FPU, running up to 120 MHz, integrating 512 KB of Flash with ECC and 192 KB SRAM, and housed in a 128-pin TQFP (14x14 mm) package. It is part of the SAM D51 family targeted at general-purpose applications requiring USB, advanced connectivity, and rich analog peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and SRAM), and a mix of peripherals such as timers, ADC/DAC, communication interfaces (UART, SPI, I2C, USB, CAN, Ethernet), and GPIO into one package. MCUs are the lowest tier of the embedded processor hierarchy (MCU -> microprocessor -> SoC), and the Cortex-M4F class specifically targets deterministic real-time control with hardware floating-point and DSP extensions. The SAM D51 family sits at the high end of Microchip's Cortex-M4F portfolio, above the SAM D21 and SAM D11 families, and offers substantially more memory, peripherals, and connectivity than lower-tier parts. Key features of the ATSAMD51P19A-AU-EFP include: ARM Cortex-M4F core with single-precision FPU and DSP extensions, 120 MHz max CPU clock, 512 KB Flash with ECC (Extended Flash Performance variant), 192 KB SRAM, full-speed USB 2.0 with integrated PHY, up to 6 SERCOM serial communication interfaces, 12-bit ADC and DAC, and a 128-pin TQFP footprint. The EFP suffix indicates the Extended Flash Performance temperature/operating profile. Technically, the SAM D51 architecture uses a 4-layer AHB bus matrix for parallel peripheral DMA, a low-power sleepwalking peripheral event system, and an Event System for inter-peripheral signaling without CPU intervention. The integrated USB 2.0 Full-Speed PHY eliminates external components for USB-device applications, while the 12-bit 1 MSPS ADC enables precision mixed-signal sensing. Typical applications include industrial IoT edge nodes, USB human-interface devices (HID), motor control (BLDC and FOC), graphical HMI with TFT displays, audio processing with USB streaming, smart energy metering, and wearable medical/fitness devices. The wide peripheral set also suits home automation gateways and connected sensor hubs. Designers should ensure the PCB provides adequate 3.3V decoupling (100 nF + bulk) near each power pin, route the USB DP/DM pair as a 90-ohm differential, and respect the 128-pin TQFP land pattern. Programming is supported through Microchip's MPLAB X IDE and Atmel Studio, with debug via SWD or JTAG. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the ATSAMD51P19A-AU-EFP for new designs and replacements.

見積もり お問い合わせ
ATSAMD51P19A-CTFT - 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAMD51P19A-CTFT

ATSAMD51P19A-CTFT - 120MHz Cortex-M4F MCU 512KB | Microchip

The Microchip Technology ATSAMD51P19A-CTFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 high-performance family, running at up to 120 MHz with a single-precision Floating Point Unit (FPU), 512 KB of dual-panel Flash with ECC, and housed in a 120-pin TFBGA (8x8 mm) extended-temperature package. According to the manufacturer product page, the SAM D51 series targets general-purpose applications that combine DSP-class signal processing, USB connectivity, and rich analog integration in a single chip. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O on a single die. The Cortex-M4F class represents ARM's mainstream performance tier with DSP extensions and a hardware FPU, sitting between the Cortex-M3 (no FPU) and Cortex-M7 (higher performance) in ARM's hierarchy. Microcontrollers in this class are positioned within the broader category: 32-bit MCU -> ARM Cortex-M -> microcontroller -> semiconductor IC -> embedded system. The SAM D51 family integrates up to 1 MB Flash, up to 256 KB SRAM, a high-speed USB 2.0 interface, multiple SERCOM channels, I2S, CAN-FD, and an on-chip 12-bit ADC, making it suitable for connected industrial, audio, and HMI designs. Key features of the ATSAMD51P19A-CTFT include 512 KB Flash, 192 KB SRAM, a 120 MHz maximum CPU clock, USB 2.0 Full-Speed with integrated PHY, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DACs, multiple SERCOM peripherals configurable as UART/SPI/I2C, and an Event System for inter-peripheral signaling without CPU overhead. The integrated FPU enables single-cycle floating-point MAC operations, while the DSP extensions deliver SIMD-style signal processing acceleration. From a technical depth perspective, the SAM D51 uses a 65 nm low-power CMOS process and integrates a 4 KB instruction cache plus a tightly-coupled memory (TCM) interface, which reduces Flash access latency for time-critical loops. Hardware cryptographic accelerators (AES, SHA, and GCM) and a true random number generator (TRNG) support secure boot and TLS-style stacks. The 120-pin TFBGA exposes the full peripheral set, including parallel capture for camera interfaces and a high-bandwidth QSPI for external memory expansion. Typical applications for the ATSAMD51P19A-CTFT include USB-audio interfaces, industrial HMI panels with touch sensing, IoT edge nodes with on-chip crypto, motor control drives with FOC firmware, and portable medical devices needing low-power DSP. The 8x8 mm TFBGA package supports compact, high-density board layouts where thermal and routing headroom is constrained. When designing with this part, observe the 1.71 V to 3.63 V supply range and ensure decoupling per the datasheet recommended layout. The TFBGA requires microvia or via-in-pad PCB processes for reliable assembly - confirm with your CM before committing to layout. The on-chip regulator must be configured to the correct low-power mode at startup; consult the Atmel Start / MPLAB Harmony configuration files for validated defaults. This page synthesizes verified distributor pricing, drop-in alternatives, and design notes not aggregated on a single manufacturer page, giving procurement and design engineers a faster path from datasheet to prototype.

見積もり お問い合わせ
ATSAMD51P19A-CTUT - 120MHz Cortex-M4F MCU, 512KB Flash, 120-TFBGA | Microchip
ATSAMD51P19A-CTUT

ATSAMD51P19A-CTUT - 120MHz Cortex-M4F MCU, 512KB Flash, 120-TFBGA | Microchip

The Microchip Technology ATSAMD51P19A-CTUT is a 32-bit ARM Cortex-M4F SAM D51 microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), delivering 512 KB of dual-panel Flash with ECC and approximately 192 KB SRAM, housed in a 120-ball 8x8 mm TFBGA package. It operates from a 1.71 V to 3.63 V supply, supports industrial temperatures from -40 C to +85 C, and exposes up to 90 GPIO lines. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, DAC, timers, communication controllers) on one die. Within the broader taxonomy, the ATSAMD51 sits in the Cortex-M4 class of mid-to-high performance microcontrollers, above Cortex-M0/M3 parts and below Cortex-M7 application processors; SAM D51 specifically is Microchip's general-purpose performance tier positioned between the lower-power SAMD20 and the higher-end SAME70. This 120 MHz Cortex-M4F class is widely used in IoT, industrial control, and consumer HMI designs that need DSP instructions, single-precision float, and deterministic interrupt response. Key features that distinguish this part include its 120 MHz core with FPU and DSP extensions, dual-panel Flash with hardware ECC for safety, an on-chip Full-Speed USB 2.0 device/host controller, a 12-bit 1 MSPS ADC with up to 16 channels, a 12-bit 1 MSPS DAC, multiple SERCOM interfaces configurable as UART/SPI/I2C, a 16-bit Event System, and a 32-bit Real-Time Clock. The 120-TFBGA package also provides excellent thermal dissipation and signal integrity at 120 MHz operation, while the SD/MMC host interface enables external storage for logging or display buffer needs. The architecture combines the ARM Cortex-M4F core with Microchip's peripheral-rich Atmel/Mchp IP blocks. Dual-panel Flash allows in-field updates without halting execution (live firmware upgrade) and ECC protects against single-bit memory faults - both important for functional-safety and IEC 60730 / IEC 61508-style designs. The Cortex-M4F FPU accelerates float math; paired with the included DSP instructions it can run audio codecs, sensor fusion, and small ML inference on-device without offloading to a host. Typical applications include industrial HMI panels, USB-based data loggers, motor control with FOC loops, connected sensor hubs, and consumer audio products. The 120 MHz speed plus DSP makes it suitable for real-time audio decoding and active-noise-cancelling headphone designs, while the high GPIO count fits multi-button white goods, HVAC controllers, and small home appliances. When designing with the ATSAMD51P19A-CTUT, allocate at least one decoupling 100 nF + 1 uF per VDD pin pair, and route the 120-ball TFBGA BGA fan-out on inner layers with 0.4 mm pitch. The WLCSP/BGA package requires reflow profile per J-STD-020 (MSL-3 typically), and the Cortex-M4F vector table must be remapped in software after boot if the bootloader is moved to a different Flash region. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone manufacturer datasheet or distributor catalog.

見積もり お問い合わせ
ATSAMD51P19A-CTUT-EFP - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51P19A-CTUT-EFP

ATSAMD51P19A-CTUT-EFP - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51P19A-CTUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with single-precision Floating Point Unit (FPU), 512 KB Flash, and 192 KB SRAM, housed in a 120-pin TFBGA (8x8 mm) package with Extended Flash Performance (EFP) suffix and Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (Flash for code, SRAM for data), and a rich set of peripherals onto one die. The Cortex-M4F architecture belongs to ARM's microcontroller class, adding hardware single-precision floating-point acceleration and DSP instructions on top of the Thumb-2 instruction set. Within Microchip's hierarchy, the SAM D51 sits above the SAM D21 (Cortex-M0+) and SAM D11 (Cortex-M0+) as a high-performance general-purpose family, beneath the Cortex-M7-based SAME70/SAMS70 line, and shares its D5x/E5x platform with the lower-pin-count SAM E51 variants. Key features include up to 120 MHz CPU clock, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, an integrated full-speed USB 2.0 device/host interface, 99 programmable I/O lines, multiple SERCOM (serial communication) interfaces, a 12-bit ADC and 12-bit DAC, and a Cryptographic True Random Number Generator. The Cortex-M4F core delivers 1.25 DMIPS/MHz with DSP extensions, while the on-chip FPU removes the throughput penalty of software floating-point math used in motor control or sensor-fusion algorithms. Architecturally the SAM D51 uses a multi-layer AHB bus matrix giving the CPU, DMA, and peripherals parallel access to SRAM and Flash, which removes the usual contention bottleneck seen on simpler MCUs. ECC on both Flash and SRAM targets safety-critical IEC 60730 class B firmware regimes. The Extended Flash Performance suffix indicates the variant is rated for higher endurance / industrial-grade Flash operation than the non-EFP base part. Typical applications include industrial HMI panels, USB peripherals and human-interface devices, IoT sensor hubs, motor control with FOC, and audio processing. When designing with this part, allocate decoupling capacitance per the datasheet's recommended power-supply network and follow the 120-pin TFBGA escape routing guidelines to maintain signal integrity on the high-speed SERCOM and USB lines.

見積もり お問い合わせ
ATSAMD51P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAMD51P20A-AUT

ATSAMD51P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip ATSAMD51P20A-AUT is a 32-bit ARM Cortex-M4F microcontroller with FPU running up to 120 MHz, integrating 1 MB of dual-panel Flash with ECC and 256 KB of SRAM, housed in a 128-pin TQFP (14x14 mm) package for automotive-grade applications up to +85C. The part belongs to Microchip's SAM D51 family and is qualified to AEC-Q100, targeting safety-critical and harsh-environment embedded systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M4F architecture adds a single-precision IEEE 754 Floating Point Unit and a DSP instruction set, which accelerates closed-loop control loops and signal-processing tasks. Within the broader hierarchy, the ATSAMD51P20A sits as: MCU -> 32-bit MCU -> ARM Cortex-M4F MCU -> SAM D51 family -> Microchip microcontrollers. It competes directly with other high-performance Cortex-M4F parts such as STM32F4 and Kinetis K6x. Key features of the ATSAMD51P20A-AUT include 120 MHz CPU clock with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM, a 12-bit 1 MSPS ADC with up to 32 channels, two 12-bit DACs, four SERCOM channels (configurable as UART/SPI/I2C), an on-chip high-speed USB 2.0 PHY, a CAN-FD controller, an Ethernet MAC with 1588 PTP, and an integrated 32 kHz RTC. The 128-TQFP package exposes a rich GPIO set while keeping the part compatible with standard SMT reflow lines. Architecturally, the SAM D51 uses Microchip's event system and SERCOM peripherals to allow flexible peripheral routing without fixed pin mapping. The 1 MB dual-panel Flash allows simultaneous read-while-write, enabling reliable in-field firmware upgrades. The device operates from 1.71V to 3.63V, and integrates a high-accuracy internal 48 MHz DFLL that can be locked to the USB SOF for jitter-free USB. Typical applications include automotive body electronics, industrial HMI panels, building automation controllers, IoT edge nodes with USB or Ethernet connectivity, sensor fusion hubs, and portable medical devices. The combination of FPU, large SRAM, Ethernet, and CAN-FD makes the part attractive as a system-on-chip in mid-complexity designs. When designing with the ATSAMD51P20A-AUT, ensure the decoupling network follows Microchip's recommended 100 nF + 4.7 uF per VDD pin, place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pins, and respect the 4-layer PCB layout guideline for the high-speed USB differential pair. The automotive-grade variant (-AUT) is rated to +85C; for +125C designs, consult the -AFT (automotive grade 1) family member instead. This page synthesizes distributor pricing, parametric comparison with other SAM D51 variants, drop-in alternatives in the same 128-TQFP footprint, and PCB design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
ATSAMD51P20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-128
ATSAMD51P20A-AUT-EFP

ATSAMD51P20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-128

The Microchip Technology ATSAMD51P20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), running up to 120 MHz, with 1 MB Dual-Panel Flash (with ECC) and up to 256 KB SRAM (with ECC), housed in a 128-pin TQFP (14x14 mm) package. It belongs to the SAM D51 high-performance MCU family and is offered in the industrial -AUT tape-and-reel variant with extended flash performance (EFP suffix), targeting general-purpose embedded applications. The device integrates a rich peripheral set including a high-speed USB 2.0 Full-Speed device/host, up to two I2S interfaces, multiple SERCOM channels, a 12-bit ADC and DAC, and a sophisticated Event System. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. The SAM D51 line sits within the broader hierarchy of 32-bit ARM Cortex-M microcontrollers, which in turn belong to the wider category of embedded microcontrollers and SoCs (systems on chip). The Cortex-M4F core adds single-precision floating-point and DSP extensions, distinguishing it from Cortex-M0/M0+/M3 cores. Combined with up to 1 MB flash and 256 KB SRAM, the SAMD51 family is positioned for mid-to-high-end IoT, motor control, and human-machine interface (HMI) designs that exceed the capability of Cortex-M0+ parts such as the SAMD21 family. Key features of the ATSAMD51P20A include 120 MHz CPU clock, 1 MB dual-panel Flash with ECC for safety, 256 KB SRAM with ECC, a high-speed USB 2.0 Full-Speed interface, a 12-bit 1 Msps ADC (up to 32 channels), a 12-bit 1 Msps DAC, multiple SERCOM (configurable serial) channels, and advanced timer/counter peripherals with dead-time generation. The integrated FPU accelerates floating-point math, and the Event System and DMA engine provide low-latency peripheral-to-peripheral and memory transfers. The ATSAMD51P20A's architecture combines an M4F core with tightly-coupled SRAM, a multi-layer bus matrix (HSB/AHB/APB), and a Peripheral Event System that lets peripherals trigger one another without CPU intervention. The dual-panel Flash with ECC supports read-while-write (RWW) operation, allowing firmware updates without stopping code execution, while hardware ECC protects against bit flips in automotive and industrial environments. Typical applications for the ATSAMD51P20A-AUT-EFP include industrial control (PLC I/O modules, sensor hubs, HMI displays), USB peripherals (Human Interface Devices, CDC serial bridges, audio devices), IoT edge nodes, drone flight controllers, and audio processing where the FPU and DSP instructions accelerate FFT and filter workloads. The 128-TQFP footprint makes it ideal for prototype boards that need maximum GPIO count. When designing with this part, pay close attention to decoupling: place 100 nF X7R capacitors on every VDD/VDDIO pin pair and a 4.7 uF tantalum or ceramic bulk cap at the regulator output. The DM/DP USB lines require 90 ohm differential impedance and a 1 M ohm pull-down on D+ to keep the device disconnected during reset. JTAG or SWD (20 pins) plus the standard 38-pin ARM Cortex-M Debug Connector keep development simple. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including extended-temperature and EFP-flash variants within the SAM D51 family for engineers who need pin-compatible scaling across memory sizes.

見積もり お問い合わせ
ATSAMD51P20A-CTFT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51P20A-CTFT

ATSAMD51P20A-CTFT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51P20A-CTFT is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU) running up to 120 MHz, featuring 1 MB of Dual-Panel Flash with ECC and up to 256 KB of SRAM with ECC, housed in a 120-pin TFBGA (8x8 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The SAM D51 series targets general-purpose applications using the 32-bit ARM Cortex-M4 processor, which sits in the Cortex-M family hierarchy above Cortex-M0/M0+ (low-power) and below Cortex-M7 (high-performance). It belongs to the broader category of embedded microcontrollers -> 32-bit microcontrollers -> ARM-based MCUs -> semiconductor ICs. Key specifications include: ARM Cortex-M4F core with single-precision FPU, 120 MHz maximum CPU clock, 1 MB Dual-Panel Flash with ECC, 256 KB SRAM with ECC, full-speed USB 2.0 with embedded PHY, two CAN-FD interfaces, I2S, SD/MMC host, and up to 99 GPIO. The TFBGA-120 (8x8 mm) package provides a compact footprint suitable for space-constrained designs. Architecturally, the SAM D51 leverages the Cortex-M4F with DSP extensions and a single-precision floating-point unit, supported by a high-bandwidth bus matrix, dual-bank flash for live updates, and a 12-bit, 1 MSPS ADC. The peripheral set includes SERCOM (configurable serial), high-speed timers, and a crypto accelerator, making it suitable for mixed-signal and connected applications. Typical applications include industrial automation (CAN-FD node controllers), USB audio/Class-D amplifiers, IoT edge nodes, human-machine interface (HMI) panels, and motor control. The wide operating voltage range and rich connectivity suit it for sensor fusion and battery-powered portable devices. When designing with this device, ensure PCB layout accommodates the 0.5 mm pitch BGA using appropriate via-in-pad or dog-bone fanout, and provide adequate decoupling on VDD pins (1uF + 100nF) close to the package. The dual-panel flash architecture enables over-the-air firmware updates without downtime. This page synthesizes distributor pricing, parametric alternatives, and practical BGA design notes not found in the manufacturer datasheet alone, providing a single-decision reference for engineers evaluating the SAM D51 family for new designs.

見積もり お問い合わせ
ATSAMD51P20A-CTUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51P20A-CTUT

ATSAMD51P20A-CTUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51P20A-CTUT is a 32-bit ARM Cortex-M4F microcontroller with FPU running up to 120 MHz, integrating 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC, housed in a 120-ball 8x8 mm TFBGA package. The SAM D51 family targets general-purpose high-performance embedded applications requiring DSP-class signal processing, hardware crypto via TrustZone-style secure boot, and rich connectivity including USB 2.0 Full-Speed with on-the-go (OTG) and a high-speed 12-bit ADC up to 1 Msps. What is a Cortex-M4F microcontroller? An ARM Cortex-M4F microcontroller (MCU) is a 32-bit RISC processor core that adds a single-precision floating-point unit (FPU), DSP extensions (MAC, SIMD), and a Nested Vectored Interrupt Controller (NVIC). It sits within the ARM Cortex-M family (M0/M0+/M3/M4/M7/M33) and is positioned between the Cortex-M3 (no FPU, no DSP) and Cortex-M7 (higher clock, dual-issue). MCUs integrate the core with on-chip Flash, SRAM, peripherals (ADC, timers, communication), and sometimes radios or crypto accelerators, enabling single-chip embedded solutions. Key features of the ATSAMD51P20A include 1 MB dual-panel Flash (allowing live read-while-write updates), 256 KB SRAM, a 120 MHz core with FPU DSP instructions, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a Full-Speed USB 2.0 device/host/OTG controller, and a QSPI/SPI interface for external memory expansion. The device operates from 1.71V to 3.63V. Architecturally the ATSAMD51P20A uses the Cortex-M4F core with a 4 KB instruction cache and branch prediction to sustain close to 1.25 DMIPS/MHz at 120 MHz. The peripheral set is event-driven via the Event System, allowing deterministic inter-peripheral signaling without CPU intervention. Hardware cryptographic accelerators (AES, SHA, Public Key Cryptography Controller) and a True Random Number Generator (TRNG) are integrated in the family, enabling secure boot and TLS-style key operations. The Dual-Panel Flash implements ECC on each 32-bit word to mitigate bit failures from radiation or aging. Typical applications include industrial IoT sensor hubs, USB audio Class-D amplifier controllers, HMI panels with TFT displays, motor control via the integrated PWM timers and CCL (Configurable Custom Logic), low-power battery-powered wearables using the SAM D51 SleepWalking feature, and high-performance HMI with on-chip FPU driving audio and graphics pipelines. Designers favor this part when migrating from STM32F4-class MCUs that lack integrated USB OTG with the same package footprint density. When designing with the ATSAMD51P20A-CTUT, follow the SAM D51 errata document and add decoupling capacitors per the recommended footprint. The 120-TFBGA package requires 4-layer or better PCB stack-up with microvia-in-pad capability; the exposed-pad-style thermal pad must be soldered to a ground copper pour for thermal dissipation and electrical reference.

見積もり お問い合わせ
ATSAMD51P20A-CTUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAMD51P20A-CTUT-EFP

ATSAMD51P20A-CTUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAMD51P20A-CTUT-EFP is a 32-bit ARM Cortex-M4F microcontroller with FPU from the SAM D51 family, running up to 120 MHz with 1 MB dual-panel Flash (with ECC) and up to 256 KB SRAM (with ECC), housed in a 120-pin TFBGA (8x8) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. Within the broader taxonomy, an MCU is a member of the embedded controller family, which itself sits under microcontrollers and microprocessors in the semiconductor hierarchy. The Cortex-M4F class adds a single-precision hardware Floating Point Unit and DSP extensions, making the part suitable for real-time signal processing while retaining deterministic interrupt behavior. Key features include a 120 MHz Cortex-M4F core, 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, a full-speed USB 2.0 interface with integrated PHY, a 12-bit 1 MSPS ADC up to 16 channels, two 12-bit DAC outputs, multiple SERCOM peripherals configurable as UART/SPI/I2C, an I2S/SDHOST interface, and a cryptographic engine (TRNG, AES, SHA). The integrated FPU and DSP instructions accelerate complex math without burdening the main core. The SAM D51 architecture pairs a high-performance bus matrix with the Cortex-M4F core, separate AHB/APB bridges for peripherals, and tightly coupled memory paths that keep interrupt latency predictable. The Extended Flash Performance (EFP) suffix denotes a factory-optimized Flash process option that boosts code execution speed from this MCU family, while CTUT indicates a TFBGA-120 package shipped in Tape & Reel. Typical applications include industrial HMI panels, USB-connected instrumentation, audio DSP front ends, IoT gateways, and motor-control prototyping. Its combination of high-throughput ADC, USB, and DSP capability makes it a strong choice for sensors-to-cloud data aggregation designs. When designing with this part, plan decoupling around the multiple VDD rails (VDD, VDDIO, VDDANA) and route the USB DP/DM lines as a 90 ohm differential pair. The 120-pin BGA requires microvia or via-in-pad PCB technology and X-ray inspection for assembly QA. This page synthesizes distributor pricing, drop-in SAM D51 alternatives, and PCB layout guidance not found on the standard distributor product page, helping engineers shorten the BOM decision cycle for high-performance Cortex-M4F designs.

見積もり お問い合わせ
ATSAMDA1E14B-MBT - ARM Cortex-M0+ MCU 48MHz 16KB Flash 32-VQFN
ATSAMDA1E14B-MBT

ATSAMDA1E14B-MBT - ARM Cortex-M0+ MCU 48MHz 16KB Flash 32-VQFN

The Microchip Technology ATSAMDA1E14B-MBT is a 32-bit ARM Cortex-M0+ microcontroller operating at 48 MHz (45 DMIPS) from the SAM DA1 family with Functional Safety (FuSa) support, integrating 16 KB Flash, 4 KB SRAM, and 512 bytes of RWW Flash, housed in a 32-pin VQFN (5x5 mm) package with exposed thermal pad. An ARM Cortex-M0+ microcontroller is a low-power 32-bit processor core designed for energy-efficient embedded applications. It belongs to the ARM Cortex-M family (which also includes M0, M3, M4, M7, M23, and M33 variants), sits within the broader category of microcontrollers (MCUs) -> embedded processors -> semiconductors. The M0+ is the most power-optimized member of the family, featuring a single-cycle I/O port and a 2-stage pipeline. Functional Safety (FuSa) variants like the SAM DA1 are designed to support IEC 60730 class B safety requirements for household appliances and similar regulated products. Key features of the ATSAMDA1E14B-MBT include 4 SERCOM (Serial Communication Interface) modules that can each be independently configured as USART, I2C, or SPI, an 8-channel 12-bit ADC, a 10-bit DAC, and a full-speed USB 2.0 device interface. The device operates from 1.62V to 3.63V supply voltage, making it suitable for both battery-powered and 3.3V regulated systems. The SAM DA1 architecture pairs the Cortex-M0+ core with Microchip's proprietary peripheral touch controller (PTC) supporting hardware-accelerated button, slider, and wheel sensing via Driven-Shield-plus technology. This on-chip PTC eliminates the need for an external touch IC and supports moisture-tolerant operation, which is critical for kitchen appliances, white goods, and outdoor control panels. The 32-VQFN (5x5 mm) package with exposed pad enables compact PCB layouts while providing good thermal dissipation for industrial temperature range (-40C to +85C) operation. Typical applications include touch-based user interfaces for home appliances, USB HID peripherals, low-power IoT sensor nodes, and functional-safety household control boards such as washing machine front panels, induction cooker displays, and smart thermostats. The 4 SERCOM channels and integrated USB make it a versatile main controller for connected appliances. When designing with this MCU, allocate sufficient PCB copper under the exposed pad for thermal relief, and follow the SAM DA1 datasheet reference PCB layout for the integrated PTC to achieve IEC 61000-4-6 conducted RF immunity compliance for capacitive touch performance. This page synthesizes distributor pricing, drop-in alternatives from the same SAM DA1 family, and practical design notes that complement but go beyond the manufacturer datasheet.

見積もり お問い合わせ
ATSAMDA1E15B-MBT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip
ATSAMDA1E15B-MBT

ATSAMDA1E15B-MBT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip

The Microchip Technology ATSAMDA1E15B-MBT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM DA1 Functional Safety (FuSa) family, operating at 48 MHz (45 DMIPS) and integrating 32 KB of Flash, 4 KB of SRAM, and 1 KB of RWW Flash in a 32-pin VQFN (5x5 mm) package. It belongs to Microchip's automotive- and industrial-grade safety MCU portfolio, with deterministic peripherals for motor control, sensor fusion, and functional-safety end nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, programmable I/O, and a set of on-chip peripherals such as timers, ADCs, and communication interfaces. The Cortex-M0+ core is the most energy-efficient member of the ARM Cortex-M family, designed for deterministic, low-power embedded workloads. The SAM DA1 family extends the standard SAMD20/SAMD21 family with hardware functional-safety features, deterministic latency, and BIST support intended to simplify IEC 61508 and ISO 26262 system certification. Key features include four SERCOM modules configurable as USART, I2C, or SPI, a 12-bit ADC with up to 20 channels, a 10-bit DAC, six 16-bit timers/counters, a 32-bit RTC, and full-speed USB 2.0 device with on-chip transceiver. The device supports 1.62 V to 3.63 V core VDD, low-power Sleep and Standby modes down to a few microamps, and a peripheral event system that lets peripherals trigger one another without CPU intervention. Architecturally, the ATSAMDA1E15B-MBT uses a 2-layer AHB matrix with separate buses for Flash and SRAM, enabling zero-wait-state code execution at 48 MHz from Flash. The integrated voltage regulator and Power-on Reset reduce external BOM, while the WDT, CRC, and lock-bit features add tamper resistance. The VQFN-5x5 footprint is pin-compatible with other SAM D20/D21/DA1 E-variant 32-pin parts. Typical applications include automotive body and chassis ECUs, industrial sensor nodes, building-automation controllers, low-power IoT edge devices, and functional-safety sub-systems such as over-current protection or sensor monitoring. The FuSa features make the part especially suitable for safety elements out of context (SEooC) at SIL-2 / ASIL-B levels. When designing with this device, ensure that the VQFN-5x5 exposed pad is soldered to a sufficiently large copper pour for thermal dissipation. Decouple VDD and VDDCORE with 100 nF and 4.7 µF ceramic capacitors placed within 2 mm of the supply pins, and route the SERCOM lines as impedance-controlled differential pairs when using I2C Fast Mode Plus or SPI at >25 MHz. This page synthesizes distributor pricing, drop-in alternatives from the same SAM D family, and practical design notes not found in the manufacturer datasheet, giving engineers a single, citable reference for selecting the ATSAMDA1E15B-MBT in functional-safety designs.

見積もり お問い合わせ
ATSAMDA1E16B-ABT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMDA1E16B-ABT

ATSAMDA1E16B-ABT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMDA1E16B-ABT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM DA1 family, operating at 48 MHz (45 DMIPS) with 64 KB Flash, 8 KB SRAM, and 2 KB RWW Flash in a 32-pin TQFP (7x7 mm) package. It is qualified for AEC-Q100 automotive and functional-safety (FuSa) applications, making it suitable for safety-critical embedded systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/SRAM), and programmable peripherals on one die. Within the broader semiconductor taxonomy, MCUs belong to the embedded processor family, sitting below microprocessors (MPUs) in complexity but above simple digital logic in capability. The Cortex-M0+ core is ARM's smallest and most energy-efficient application processor, designed for deterministic real-time control in cost- and power-constrained products. SAM DA1 specifically targets automotive functional-safety use cases requiring IEC 61508 SIL-capable development flows. Key differentiating features include 4 SERCOM serial-communication modules (each configurable as USART, I2C, or SPI), a 12-bit ADC, a 10-bit DAC, and full-speed USB device support. The device also integrates a hardware CRC module, a 32 kHz RTC, and up to 22 GPIO. AEC-Q100 qualification ensures operation from -40C to +125C with documented PPAP and FMEDA support, which is mandatory for body, chassis, and powertrain ECUs. Architecturally, the SAM DA1 uses a single-cycle Thumb-2 instruction set, deterministic interrupt latency, and a Microchip peripheral event system for inter-module signalling without CPU intervention. SleepWalking peripherals and multiple low-power modes (IDLE, STANDBY, BACKUP) enable current consumption below 1 mA in deep-sleep while still allowing wake on peripheral events. Typical applications include automotive body controllers, sensor interfaces, LIN nodes, HVAC control modules, and industrial safety PLCs. Design considerations include routing the 32.768 kHz crystal close to XIN/XOUT, providing a 100 nF + 4.7 uF decoupling network on VDD, and ensuring the exposed pad (EP) is soldered to a continuous ground pour for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAMDA1E16B-MBT - 48MHz ARM Cortex-M0+ 64KB Flash MCU | Microchip
ATSAMDA1E16B-MBT

ATSAMDA1E16B-MBT - 48MHz ARM Cortex-M0+ 64KB Flash MCU | Microchip

The Microchip Technology ATSAMDA1E16B-MBT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM DA1 functional-safety family, running at 48 MHz (45 DMIPS) with 64 KB of Flash, 8 KB of SRAM, and 2 KB of read-while-write (RWW) Flash, housed in a 32-pin VQFN 5x5 mm package. It delivers an integrated ADC, DAC, multiple SERCOM serial interfaces, and timers in a compact footprint designed for safety-critical embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces (ADC, timers, communication blocks, GPIO). The ATSAMDA1E16B-MBT belongs to the ARM Cortex-M0+ family, the most energy-efficient ARM core, sitting inside Microchip's SAM DA1 product line, which is itself a sub-family of the SAM D series. SAM DA1 parts add Functional Safety (FuSa) documentation and supporting libraries that simplify IEC 60730 class B compliance for household appliances and similar regulated products, while remaining pin-compatible with the broader SAM D20/D21 family. Key features include 4 SERCOM modules (each configurable as USART, I2C, or SPI), a 12-bit ADC with up to 20 channels, a 10-bit DAC, multiple 16/24-bit timers, I2S audio interface support, and a Peripheral Touch Controller (PTC) for capacitive touch sensing. The device operates from 1.62 V to 3.63 V supply and supports Sleep, Idle, and Standby modes with sub-microamp Standby current, making it well suited to battery-powered and energy-harvesting designs. Technically, the SAM DA1 architecture combines a single-cycle multiplier, single-cycle I/O port access, and a low-latency interrupt controller. The 2 KB RWW Flash allows the application to update non-volatile parameter storage while executing code from the main 64 KB array. The device is supported by Microchip Studio and MPLAB X IDE with a free ASF / START code base, easing migration and firmware reuse for engineers transitioning from AVR or PIC. Typical applications include white goods and small appliances requiring IEC 60730 class B compliance, industrial sensor nodes, low-power IoT edge devices, capacitive-touch human-machine interfaces, and cost-sensitive consumer electronics needing ARM Cortex ecosystem support. Designers should note that the 32-pin VQFN variant differs in pinout from the 32-pin TQFP and the smaller QFN packages, so PCB layout reuse is limited to the matching footprint. Adequate decoupling (one 100 nF plus one 4.7 uF bulk cap) close to VDD pins is recommended to maintain ADC accuracy under load steps. This page consolidates distributor pricing, drop-in SAM family alternatives, and practical design guidance that is not found in the manufacturer datasheet alone, helping procurement and engineering reach a decision faster.

見積もり お問い合わせ
ATSAMDA1G14B-ABT - 48MHz ARM Cortex-M0+ 16KB Flash MCU | Microchip
ATSAMDA1G14B-ABT

ATSAMDA1G14B-ABT - 48MHz ARM Cortex-M0+ 16KB Flash MCU | Microchip

The Microchip Technology ATSAMDA1G14B-ABT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM DA1 family, operating at 48 MHz (45 DMIPS), housed in a 48-pin TQFP (7x7 mm) package with 16KB Flash, 4KB SRAM, and 512B RWW Flash. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The ATSAMDA1G14B-ABT belongs to the Cortex-M0+ class - the most energy-efficient ARM core - targeted at deterministic real-time embedded control. Within the broader hierarchy, it is a 32-bit MCU, part of the Flash-memory MCU family, used in functional safety (FuSa) and AEC-Q100 automotive applications. Key features of the ATSAMDA1G14B-ABT include six SERCOM serial communication modules (each independently configurable as USART, I2C, or SPI), a 12-bit ADC, a 10-bit DAC, and full-speed USB device support. AEC-Q100 qualification, industrial temperature range (-40C to +85C), and on-chip Functional Safety (FuSa) features simplify ISO 26262 ASIL-B designs in body and chassis electronics. Architecturally, the device uses a 2-layer AHB-Lite bus matrix with separate bridges to SRAM, Flash, and peripherals, delivering zero-wait-state execution from Flash at 48 MHz. The SAM DA1 family integrates an Event System for hardware-triggered peripheral actions without CPU wake-up, plus a Peripheral Touch Controller (PTC) supporting capacitive touch buttons, sliders, and proximity sensors for HMI implementations. Typical applications include automotive body control modules, HVAC panels, sensor interfaces, capacitive touch HMI, USB-connected sensor hubs, and industrial control loops. The combination of 6 SERCOMs and USB device makes the part especially well-suited to bridge nodes that aggregate legacy UART/SPI sensors and expose them over USB to a host processor. When designing with this part, ensure the 48-pin TQFP land pattern is properly dimensioned (0.5 mm pitch) and that decoupling follows the 1 x 100 nF per VDD pin convention. The FuSa safety library requires periodic self-test - allocate one timer for the built-in CRC-based memory test. Unlike the SAM D21 (non-FuSa), the DA1 variant adds dual Flash bank support for in-application programming without downtime. This page synthesizes distributor pricing, parametric comparison, and drop-in alternatives not found in a single manufacturer datasheet - enabling engineers to evaluate the ATSAMDA1G14B-ABT in the context of price, supply chain, and functional-safety requirements.

見積もり お問い合わせ
ATSAMDA1G14B-MBT - SAM DA1 Cortex-M0+ MCU, 48MHz, 16KB Flash | Microchip
ATSAMDA1G14B-MBT

ATSAMDA1G14B-MBT - SAM DA1 Cortex-M0+ MCU, 48MHz, 16KB Flash | Microchip

The Microchip Technology ATSAMDA1G14B-MBT is an ARM Cortex-M0+ based 32-bit microcontroller from the SAM DA1 family, operating at 48MHz (45 DMIPS) and packaged in a 48-pin QFN (7x7 mm) with exposed pad. It integrates 16KB of Flash, 4KB of SRAM, and 512 bytes of RWW (Read-While-Write) Flash, balancing code density with the flexibility of in-application self-programming. The part is supplied in Tape & Reel (MBT suffix) and targets industrial temperature grades for embedded motor-control and functional-safety designs. The SAM DA1 family belongs to the broader ARM Cortex-M0+ microcontroller ecosystem, where Cortex-M0+ cores (a 32-bit successor to 8-bit legacy MCUs) deliver high DMIPS/mW efficiency, deterministic interrupt handling, and a Thumb/Thumb-2 instruction subset. Microchip's SAM DA1 line adds the trademark advanced analog and PWM peripherals required for automotive and industrial motor control, while keeping power consumption low through sleep-modes below 1 microamp. The RWW Flash architecture separates boot/calibration code from application code, enabling in-field firmware updates without stalling the application. Key features include 6 SERCOM serial communication modules (each independently configurable as USART, I2C, or SPI), a 12-bit ADC with up to 16 channels, three 16-bit Timer/Counters, and a 16-bit CC/TCC PWM controller with complementary outputs well suited to motor-drive topologies. The functional-safety (FuSa) tier provides lockstep-ready documentation paths alongside IEC 60730 class-B libraries, easing appliance certification. The 48-QFN exposed pad keeps the thermal path short and the PCB footprint compact for space-constrained inverter or BLDC designs. Architecturally, the ATSAMDA1G14B-MBT uses a single-cycle multiplier, hardware divider, and a Nested Vector Interrupt Controller (NVIC) with deterministic 4-cycle interrupt entry. The 16KB Flash is on-chip and supports Read-While-Write, allowing non-volatile data storage in a separate region. The 48-QFN package uses an exposed thermal pad that should be soldered to a ground copper pour to meet the industrial thermal envelope; bypassing the pin with a low-impedance ground stitch keeps ADC sampling noise in check. Typical applications include low-cost BLDC/PMSM motor control (fan, pump, appliance drives), LED lighting controllers with analog dimming, sensor hub node firmware, and small appliances with functional-safety requirements such as induction cooktops and washers. The 48MHz core, ample analog IP, and small footprint also suit industrial sensor conditioning and USB-free human-interface peripherals. Designers should pay particular attention to the regulator decoupling network. The SAM DA1 requires both VDDIO and VDDCORE rails, each decoupled with at least 100nF and 4.7uF ceramic capacitors placed within 3mm of their respective pins. The exposed pad on the 48-QFN must be soldered to a continuous ground plane with at least 8 thermal vias to keep junction-to-ambient thermal resistance in spec. This page synthesizes distributor pricing and stock data, a curated set of drop-in alternatives in the same 48-QFN (7x7) package, and practical design notes drawn from the Microchip SAM DA1 datasheet and application notes, providing practical context that goes beyond raw device specifications.

見積もり お問い合わせ
ATSAMDA1G15B-ABT - 48MHz Cortex-M0+ MCU 32KB Flash 48-TQFP | Microchip
ATSAMDA1G15B-ABT

ATSAMDA1G15B-ABT - 48MHz Cortex-M0+ MCU 32KB Flash 48-TQFP | Microchip

The Microchip ATSAMDA1G15B-ABT is a 32-bit ARM Cortex-M0+ microcontroller in the SAM DA1 functional-safety family, delivering 48 MHz (45 DMIPS) of CPU performance from 32 KB of Flash and 4 KB of SRAM plus 1 KB of RWW Flash, housed in a 48-pin TQFP (7x7x1.0 mm) package supplied on tape-and-reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. Within the broader semiconductor hierarchy, an MCU belongs to the embedded processor family, sitting between simple 8-bit microcontrollers and application processors. The SAM DA1 family is the first sub-tier of the SAM D ARM Cortex-M0+ lineup and adds functional-safety (FuSa) hardware features including dual brown-out detectors, a windowed watchdog timer, and a Cortex-M0+ core with cycle-level deterministic interrupt response. Key features include up to six SERCOM serial-communication modules (each independently configurable as USART, I2C, or SPI), a 12-bit ADC with up to 12 channels and 350 ksps throughput, a 10-bit DAC, two analog comparators, and up to 38 GPIO. The peripheral event system allows direct hardware-level signaling between on-chip peripherals without CPU intervention, reducing latency and power consumption. The ATSAMDA1G15B-ABT uses a single-rail 1.62-3.63 V supply with an internal 8 MHz regulator and a separate 32.768 kHz low-power oscillator for RTC operation. Built-in ARM Serial Wire Debug, a 2-channel DMA controller, and the SAM D21/DA1 peripheral IP combine to make this device a low-power deterministic platform for safety-sensitive IoT nodes, sensor hubs, and human-machine-interface controllers. Typical applications include industrial sensor conditioning, building automation, low-power wireless sensor nodes, appliance user-interface boards, and safety-conscious LED lighting controllers. Designers select this part when functional-safety support, ultra-low power, and a Cortex-M ecosystem are required. When designing with this MCU, budget for an external 32.768 kHz crystal if RTC accuracy matters, and follow the Atmel/Microchip SAM DA1 errata for ADC offset calibration at temperatures below 0 degrees C. This page synthesizes distributor stock, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
ATSAMDA1G15B-MBT - ARM Cortex-M0+ MCU 48MHz 32KB Flash | Microchip
ATSAMDA1G15B-MBT

ATSAMDA1G15B-MBT - ARM Cortex-M0+ MCU 48MHz 32KB Flash | Microchip

The Microchip Technology ATSAMDA1G15B-MBT is an ARM Cortex-M0+ based microcontroller (MCU) from the SAM DA1 family, operating at 48 MHz (45 DMIPS) with 32 KB of Flash, 4 KB of SRAM, and 1 KB of Read-While-Write (RWW) Flash memory, housed in a 48-pin QFN (7x7 mm) package. The part operates from a 1.62V to 3.63V supply and integrates six SERCOM serial interfaces that can each be configured as USART, I2C, or SPI, giving the MCU exceptional peripheral flexibility. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The SAM DA1 family belongs to the broader ARM Cortex-M0+ class of microcontrollers, which are widely used for low-power, deterministic embedded control. Within the Microchip portfolio, SAM DA1 sits between the smaller SAMD10/D11 series and the higher-performance SAMD20/D21 family, targeting cost-sensitive functional-safety applications. The 'A' suffix in DA1 designates the AEC-Q100 automotive-grade family, and the Functional Safety (FuSa) variant adds safety documentation, FMEDA, and diagnostic libraries suited to ISO 26262 ASIL-B designs. Key features of the ATSAMDA1G15B-MBT include the Cortex-M0+ core with single-cycle I/O access, a full-speed USB 2.0 device interface, 12-bit ADC up to 350 ksps, 10-bit DAC, multiple timers (TC, RTC), and a Peripheral Touch Controller (PTC) supporting capacitive sensing. The device also has a 12-channel event system, configurable SERCOM peripherals, and an integrated 32.768 kHz oscillator for RTC operation. DMA support through eight channels keeps CPU load low when servicing high-throughput peripherals. Architecturally, the SAM DA1 uses a 32-bit ARMv6-M instruction set, a 2-layer AHB bus matrix, and Microchip's proprietary Atmel Start / Harmony 3 peripheral library. The QFN-48 package provides an exposed thermal pad that lowers junction-to-PCB thermal resistance, supporting higher ambient operating temperatures for automotive under-hood and industrial environments. Typical applications include automotive body electronics (BCM, lighting, HVAC), industrial sensor hubs, smart appliances, USB HID peripherals, capacitive-touch human-machine interfaces, and functional-safety sub-systems such as sensor monitoring and actuator control in vehicle ECUs. The AEC-Q100 qualification and FuSa documentation make it especially attractive for safety-critical automotive subsystems. When designing with this MCU, ensure decoupling is placed within 5 mm of each power pin and that the exposed pad is soldered to a continuous ground pour to achieve the datasheet thermal performance. Choose between the MBT (QFN-48) and ABT (TQFP-48) variants based on assembly process: QFN requires reflow with bottom pad soldering, while TQFP supports standard wave or reflow. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet. Engineers searching for ATSAMDA1G15B-MBT specifications, pinout, datasheet PDF, AEC-Q100 grade, or SAM DA1 cross-reference will find verified parameters and drop-in replacement guidance here.

見積もり お問い合わせ