マイクロコントローラ

製品 (18747)

ATSAME54P19A-CTUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME54P19A-CTUT

ATSAME54P19A-CTUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME54P19A-CTUT is a 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit running up to 120 MHz, integrating 512 KB dual-panel Flash with ECC and 192 KB SRAM with ECC in a 120-ball TFBGA (8x8 mm) package for industrial applications. The SAM E54 family adds a 2-channel CAN-FD, USB 2.0 Full Speed with PHY, Ethernet 10/100 MAC with PHY, and a high-speed 12-bit ADC up to 1 Msps. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, communication interfaces, and ADCs. Within the embedded hierarchy, the ATSAME54P19A sits in the high-performance MCU tier, above 8-bit MCUs (such as PIC16) and below application processors, offering deterministic real-time control with M4-class DSP and FPU capabilities. It targets industrial and IoT edge applications where deterministic performance and on-chip connectivity are required. Key features of the ATSAME54P19A-CTUT include the Cortex-M4F core with FPU, 512 KB dual-panel Flash supporting live update, 192 KB SRAM, an Event System for inter-peripheral signaling without CPU involvement, a 12-bit 1 Msps SAR ADC with up to 16 channels, two I2C, two UART/USART, four SERCOM, plus the integrated HS USB, Ethernet MAC+PHY, and CAN-FD. The 120-ball TFBGA package supports compact PCB layout, while the 120 MHz clock speed enables DSP-class signal processing in real time. Technically, the SAM E54 series uses the Cortex-M4F core with single-precision floating point, DSP extensions, and a Memory Protection Unit. The dual-panel Flash architecture allows one bank to run code while the other is reprogrammed, enabling field firmware updates without downtime - critical for industrial controllers, building automation, and connected appliances. ECC on both Flash and SRAM improves reliability in electrically noisy environments. Operating voltage is 1.71 V to 3.63 V across the industrial temperature range. Typical applications include industrial control and HMI panels, CAN-FD node controllers in building automation and solar, USB device peripherals, Ethernet-connected sensors and edge gateways, and motor-control loops using the integrated PWM timers and ADC. Designers favor this part where a single-chip solution replaces an MCU + external PHY + external CAN transceiver stack. A key design consideration is power budgeting: at 120 MHz the core draws significantly more current than at lower clock speeds, so use the integrated Dynamic Frequency Scaling and the on-chip voltage regulator to balance performance and current. Decoupling must follow the datasheet reference layout; the 120-ball BGA requires the central ground balls thermally bonded to a ground plane for thermal and signal-integrity reasons. This page synthesizes distributor pricing, application-ready companion recommendations, and practical design notes not found in the standalone datasheet PDF.

見積もり お問い合わせ
ATSAME54P19A-CTUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, 120-TFBGA | Microchip
ATSAME54P19A-CTUT-EFP

ATSAME54P19A-CTUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, 120-TFBGA | Microchip

The Microchip Technology ATSAME54P19A-CTUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 high-performance family, integrating a Floating Point Unit (FPU) running up to 120 MHz, with 512 KB of Flash and 192 KB of SRAM, housed in a 120-ball TFBGA (8x8 mm) package. The part ships in Tape & Reel and is qualified for Extended Flash Performance (EFP suffix), with an operating voltage range of 1.71 V to 3.63 V. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals into one IC. The SAM E54 family sits within the Cortex-M4F tier of the ARM Cortex-M hierarchy (Cortex-M0 -> Cortex-M3 -> Cortex-M4F -> Cortex-M7), and Microchip positions it between the SAM D51 and SAM E70 families. The Cortex-M4F adds single-precision floating point and DSP extensions, making it suitable for signal conditioning, motor control loops, and digital filter computation while remaining deterministic for real-time control. Key features include a 120 MHz Cortex-M4F core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, a high-speed 120 MHz peripheral bus, Full-Speed USB 2.0 with integrated PHY, 10/100 Mbps Ethernet MAC, CAN-FD, and multiple SERCOM interfaces. The device also exposes a 12-bit ADC up to 1 Msps, DAC outputs, and PWMs suited to digital power conversion. The EFP suffix indicates Extended Flash Performance characteristics for industrial temperature operation. Typical applications include industrial Ethernet gateways, USB-to-UART/CAN bridges, building automation controllers, point-of-sale terminals, and motor-control front-ends. The combination of high-speed USB, CAN-FD, and Ethernet MAC on the same die eliminates external PHY/MAC chips for many industrial networking designs. The dual-panel Flash with ECC enables live firmware updates with minimal downtime. When designing with this part, allocate decoupling capacitance of at least 100 nF on every VDD pin and 4.7 µF bulk capacitance near the LDO output. The TFBGA-120 package requires 4-layer PCB with 0.8 mm pitch fanout and laser-drilled or via-in-pad escape for reliable assembly. Confirm errata DS80000764 before committing to high-volume layout. This page consolidates distributor inventory, EOL guidance from the Microchip PCN (effective December 15, 2025), drop-in alternatives from the SAM E5x family, and PCB layout notes not found in the manufacturer datasheet, helping engineers source, qualify, or replace this device with confidence.

見積もり お問い合わせ
ATSAME54P20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash, Ethernet | Microchip
ATSAME54P20A-AF

ATSAME54P20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash, Ethernet | Microchip

The Microchip Technology ATSAME54P20A-AF is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision FPU, packaged in a 128-pin TQFP (14x14 mm) industrial-grade enclosure. The device integrates 1 MB of dual-panel Flash with ECC, 256 KB SRAM with ECC, and a rich connectivity suite including 10/100 Ethernet MAC, USB, and Dual CAN-FD. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a programmable set of peripherals. The SAM E54 sits in the high-performance tier of Microchip's Cortex-M4F portfolio, sharing the SAM D5x/E5x family architecture with a deterministic interrupt model, ARM TrustZone-M support, and a 12-bit 1 Msps ADC for precision analog acquisition. Key features of the ATSAME54P20A-AF include up to 120 MHz CPU clock with FPU and DSP extensions, 1 MB Flash / 256 KB SRAM with single-error-correction ECC, an integrated 10/100 Ethernet MAC with IEEE 1588 PTP support, and Dual CAN-FD controllers for high-throughput automotive/industrial networking. A high-speed USB 2.0 Full-Speed interface, a 12-bit 1 Msps ADC with up to 32 channels, and multiple SERCOM peripherals deliver flexible communication. Architecturally, the SAM E54 uses a Cortex-M4F core with tightly-coupled memory, a 4 KB instruction cache, and a multi-layer bus matrix for parallel peripheral access. The dual-panel Flash allows simultaneous read-while-write, enabling live firmware updates without halting code execution. ECC on both Flash and SRAM is critical for functional-safety applications targeting IEC 61508 or ISO 26262. Typical applications include industrial Ethernet gateways, building automation controllers, automotive body and chassis ECUs, smart energy / solar inverter control, and human-machine interface (HMI) panels with TFT displays. The combination of Ethernet + CAN-FD + USB positions this MCU as a networking hub. Design tip: bypass VDDIO/VDDIN pins with 100 nF + 4.7 uF ceramics placed within 3 mm of the package, and provide a dedicated ferrite on AVDD for the ADC to achieve full 12-bit ENOB. Trace routing for the Ethernet RMII signals should be length-matched within 50 mils. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet to support rapid component selection.

見積もり お問い合わせ
ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54P20A-AFT

ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip ATSAME54P20A-AFT is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision FPU, 1 MB dual-panel Flash with ECC, and 256 KB SRAM with ECC, housed in a 128-pin TQFP (14x14 mm) package. It targets connected industrial, automotive, and IoT edge applications requiring deterministic real-time control, on-chip Ethernet, USB, and CAN-FD connectivity. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into a single silicon die. ARM Cortex-M4F cores add a hardware floating-point unit and DSP extensions, positioning the SAM E54 family in the high-performance tier of the Cortex-M lineup, above Cortex-M0/M0+ and Cortex-M3 devices. Within Microchip's portfolio, the SAM E54 sits between the lower-pin SAM D5x and the higher-end SAME70 Cortex-M7 family. Key features of the ATSAME54P20A-AFT include 120 MHz CPU clock, 1 MB Flash with dual-panel ECC, 256 KB SRAM, a 10/100 Ethernet MAC with IEEE 1588 support, USB 2.0 Full-Speed with embedded PHY, two CAN-FD controllers, an I2S audio interface, a 12-bit 1 Msps ADC, and a 16-bit PWM timer/counter for motor control. The on-chip AES/SHA crypto accelerator and true random number generator enable secure connected designs. Architecturally, the SAM E54 combines an M-class core with a multi-layer bus matrix connecting Cortex-M4F, DMA, flash, SRAM, and peripherals, enabling parallel data movement and deterministic interrupt latency. The dual-panel flash bank supports in-field firmware updates without halting the CPU, which is critical for industrial gateways and remote sensor nodes. Typical applications include industrial motor control (BLDC/PMSM drives), building automation gateways, USB/Ethernet/CAN-connected sensor hubs, audio processing peripherals, and secure IoT edge nodes. The wide operating temperature range and AEC-Q100-grade qualification pathway make it suitable for harsh-environment industrial and automotive-class designs. When designing with the ATSAME54P20A-AFT, attention to PCB layout of the high-speed Ethernet and USB signals is critical - 90 ohm differential impedance, length matching, and proper ground stitching are required for EMI compliance. The internal 1.2V core regulator requires a stable 1uF X7R decoupling network within a few millimeters of the VCORE pin. This page synthesizes current distributor pricing, drop-in alternatives within the SAME54/53/51 SAM family, and practical hardware design notes not found in the standalone datasheet - giving the engineer a single integrated reference for part selection, sourcing, and PCB bring-up.

見積もり お問い合わせ
ATSAME54P20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, TQFP-128
ATSAME54P20A-AU-EFP

ATSAME54P20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, TQFP-128

The Microchip Technology ATSAME54P20A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, integrating a 120 MHz processor core with single-precision floating-point unit, 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC. It is housed in a 128-pin TQFP (14x14 mm) package rated for the industrial temperature range and is supplied in tray packaging. The "EFP" suffix designates Extended Flash Performance / extended grade variant of the SAM E54 line, and the "AU" suffix denotes the 128-TQFP package option with -40C to +85C industrial temperature grade. An ARM Cortex-M4F MCU is a microcontroller that combines the Cortex-M4 DSP-enhanced core with an IEEE 754 single-precision floating-point unit, providing hardware-accelerated math and DSP in addition to deterministic interrupt handling for real-time embedded systems. The SAM E54 sits above general-purpose Cortex-M0+ MCUs in performance and below Cortex-M7 parts, targeting industrial control, IoT gateways, HMI, and audio/voice front-end designs where deterministic latency and DSP throughput matter. Key features include the Cortex-M4F core with FPU and DSP extensions running at up to 120 MHz, 1 MB of dual-panel Flash with ECC for high-availability firmware, 256 KB SRAM with ECC, a high-speed USB 2.0 Full-Speed device/host/On-The-Go interface, 10/100 Mbps Ethernet MAC with IEEE 1588 support, CAN-FD controllers, SD/MMC host interface, and multiple SERCOM (SERial COMmunication) channels that can be configured as UART, SPI, I2C, or LIN. The part additionally provides a 12-bit ADC up to 1 Msps, DAC, analog comparators, and cryptographic accelerators for AES/SHA. The architecture uses a multi-layer AHB bus matrix connecting the CPU, SRAM, Flash, peripheral bridges, and DMAC, allowing the Cortex-M4F core to fetch from Flash with zero-wait-state performance under typical conditions and to sustain high-throughput peripheral transfers concurrently with CPU execution. The dual-panel Flash layout enables read-while-write, useful for in-field firmware updates without halting execution. Typical applications include industrial PLCs and motor controllers, building automation gateways, HMI touch panels, USB peripherals with Ethernet bridging, audio processing front-ends that benefit from the FPU, CAN-FD automotive body and chassis ECUs, and secure connected IoT nodes using the integrated crypto accelerators and TRNG. Designers should provide adequate bypass on VDDIO and VDDANA domains per the SAM E54 datasheet recommendation (typically 100 nF plus bulk capacitors), ensure the 32.768 kHz crystal load capacitance matches the chosen crystal, and reserve the SWD pins (SWDIO/SWCLK) for in-system programming. The Ethernet PHY, USB, and CAN-FD interfaces each require external transceiver ICs. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAME54P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME54P20A-AUT

ATSAME54P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAME54P20A-AUT is a high-performance 32-bit ARM Cortex-M4F microcontroller with FPU, running up to 120 MHz, featuring 1 MB of dual-panel Flash with ECC and 256 KB SRAM with ECC, in a 128-pin TQFP (14x14 mm) industrial-grade package. It targets industrial automation, automotive, and connected IoT applications requiring deterministic real-time control combined with Ethernet and CAN-FD connectivity. The -AUT suffix indicates the automotive temperature grade with extended qualification testing per Microchip's AEC-Q100 equivalent screening for industrial/automotive use. What is a Cortex-M4F microcontroller? A Cortex-M4F (Cortex-M4 with Floating-Point Unit) is an ARM processor core designed for embedded systems that need both DSP-class signal processing and IEEE 754 single-precision floating-point math. It belongs to the Cortex-M family -> 32-bit MCU hierarchy -> embedded microprocessor -> semiconductor. The 'M' variants use Thumb-2 instruction set with deterministic interrupt latency, distinguishing them from Cortex-A application cores used in Linux systems. Key features of the ATSAME54P20A-AUT include a 120 MHz CPU with single-precision FPU, 1 MB dual-panel Flash supporting live firmware update, 256 KB SRAM, plus connectivity peripherals including 10/100 Ethernet MAC, dual CAN-FD, USB 2.0 High-Speed, and SD/SDIO/eMMC host. The SAM E54 also integrates a 12-bit 1 Msps ADC, DAC, analog comparators, and SERCOM (serial communication) ports for flexible peripheral mapping. Architecturally, the SAM E54 uses Microchip's Event System for zero-latency inter-peripheral signaling, a hardware cryptographic module supporting AES/SHA/TRNG, and a Dual-Panel Flash architecture that allows one bank to be updated while code runs from the other - critical for functional safety and Over-The-Air (OTA) firmware updates. The Cortex-M4F delivers 1.25 DMIPS/MHz with DSP extensions for sensor fusion and motor control loops. Typical applications include industrial PLCs and motor drives with FOC algorithms, automotive body and gateway ECUs, building automation BACnet/Modbus nodes, IoT edge gateways with Ethernet connectivity, and consumer audio DSP products. The combination of CAN-FD + Ethernet + Cortex-M4F DSP makes the SAME54 ideal for industrial protocol bridging. When designing with this device, plan for a robust 3.3V LDO or DC-DC supply with bulk decoupling, route the Ethernet MII/RMII signals with controlled-impedance traces, and reserve the dual-panel Flash banks for A/B OTA partitioning. Use Microchip's MPLAB Harmony 3 or ASF4 frameworks and SEGGER Embedded Studio for IDE support.

見積もり お問い合わせ
ATSAME54P20A-CTUT-EFP - SAM E54 MCU 120MHz 1MB Flash | Microchip
ATSAME54P20A-CTUT-EFP

ATSAME54P20A-CTUT-EFP - SAM E54 MCU 120MHz 1MB Flash | Microchip

The Microchip ATSAME54P20A-CTUT-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU) running up to 120 MHz, integrating 1 MB dual-panel Flash with ECC and 256 KB SRAM with ECC in a 120-ball TFBGA 8x8 mm package with USB, Ethernet, and CAN interfaces. The EFP suffix denotes the Extended Flash Performance grade supplied on Tape & Reel. An ARM Cortex-M4F microcontroller is a 32-bit microcontroller core featuring a hardware Floating Point Unit that executes single-precision IEEE-754 instructions, Thumb-2 DSP extensions, and an integrated Memory Protection Unit. It sits within the hierarchy MCU -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4F class -> Cortex-M4F with DSP/FPU, representing the upper tier of mainstream embedded microcontrollers used where deterministic real-time control meets signal-processing performance. Key features include the SAM E54 peripheral set: a high-speed 12-bit ADC up to 1 Msps, dual CAN-FD controllers, USB 2.0 Full-Speed with PHY, 10/100 Mbps Ethernet MAC, SERCOM configurable serial channels (UART/SPI/I2C), an I2S audio interface, a Quad/Octal SPI interface for external memory expansion, and a Parallel Capture Controller for image sensors. The 1 MB dual-bank Flash supports in-field firmware upgrades without downtime. Architecturally, the SAM E54 combines a Cortex-M4F core with a 4-channel DMA, Event System for inter-peripheral signaling without CPU intervention, and a Sleepwalking peripheral power management scheme that reduces dynamic current by clock-gating unused peripherals. Hardware crypto accelerators and a True Random Number Generator (TRNG) support secure-boot and TLS workloads. Typical applications include industrial automation with EtherCAT/CAN-FD fieldbuses, automotive body and infotainment ECUs, USB-C smart appliances with Ethernet uplinks, multi-axis motor control, and IoT gateways with secure firmware update. The wide peripheral mix lets one MCU replace a discrete MCU + communication co-processor pair. Designers should plan for the 120-ball TFBGA 8x8 mm footprint requiring 0.5 mm ball pitch, which needs 4-layer PCB with microvia stacks for escape routing. Decoupling: 100 nF on every VDD pin pair plus 4.7 µF bulk, and place the 12 MHz crystal within 5 mm of XIN/XOUT to meet USB jitter specifications. Avoid routing Ethernet differential pairs across power-plane splits. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical BGA-routing guidance not found in the manufacturer datasheet, accelerating sourcing and PCB layout decisions for engineers evaluating the SAM E54 family.

見積もり お問い合わせ
ATSAME70J19A-AN - 300MHz Cortex-M7 MCU 512KB Flash | Microchip
ATSAME70J19A-AN

ATSAME70J19A-AN - 300MHz Cortex-M7 MCU 512KB Flash | Microchip

The Microchip ATSAME70J19A-AN is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), operating at up to 300 MHz, and featuring 512 KB of Flash and 256 KB of SRAM in a 64-pin LQFP (10x10 mm) package. Part of the SAM E70 family, this MCU integrates a 16-bit static memory controller, HS USB with on-chip PHY, and a rich set of connectivity peripherals including CAN-FD, Ethernet, and multiple UART/SPI/I2C interfaces. The device is supported by a comprehensive Microchip ecosystem including MPLAB Harmony, Atmel Studio 7, and SEGGER Embedded Studio. What is a Cortex-M7 microcontroller? An ARM Cortex-M7 is a high-performance 32-bit microcontroller core designed for applications requiring DSP-class signal processing, complex control loops, and floating-point arithmetic. Within the broader taxonomy, the Cortex-M7 sits at the top of the Cortex-M family (above Cortex-M4/M3/M0/M0+), and the SAM E70 family sits within Microchip's portfolio of Cortex-M7-based microcontrollers, alongside the SAME70 and SAMS70 series. The Cortex-M7's superscalar pipeline, dual-issue load/store, and tightly-coupled memory enable deterministic real-time response at high clock rates. Key features of the ATSAME70J19A-AN include a 300 MHz maximum CPU clock, 16 KB instruction cache and 16 KB data cache, single-precision/double-precision hardware floating point unit (FPU), and a Memory Protection Unit (MPU). The device also provides 5x USART, 5x SPI, 4x TWI (I2C), 3x CAN-FD, 1x HS USB, 1x 10/100 Ethernet MAC, and a 12-bit ADC with up to 24 channels. Operating voltage is 1.62 V to 3.6 V, with industrial temperature grade support from -40 C to +85 C. The ATSAME70J19A-AN uses a Harvard-bus architecture with branch prediction, prefetch buffers, and tightly-coupled SRAM to minimize flash wait states at full 300 MHz operation. The peripheral DMA controller (PDC) and separate XDMAC provide high-bandwidth peripheral-to-memory transfers without CPU intervention, enabling deterministic real-time control. The integrated 16-bit SMC supports PSRAM, NOR Flash, and NAND Flash external memories, making the device suitable for systems requiring external storage. Typical applications include industrial automation controllers, building automation gateways, smart energy metering, point-of-sale (POS) terminals, medical instrumentation, and audio/voice processing systems. The HS USB with on-chip PHY, Ethernet MAC, and CAN-FD make it particularly well suited to industrial networking and IoT edge nodes requiring multiple wired connectivity interfaces. When designing with this device, allocate decoupling capacitors close to every VDD pin and provide a clean 3.3 V supply with adequate bulk capacitance. Connect the NRST line to the reset supervisor and ensure the trace to the 32.768 kHz crystal is short and guarded by ground. Use the XDMAC for high-throughput peripheral transfers to minimize CPU interrupt load. This page synthesizes distributor pricing, drop-in SAME70 family alternatives, and practical design notes not found in the standalone manufacturer datasheet PDF.

見積もり お問い合わせ
ATSAME70J19A-ANT - ARM Cortex-M7 300MHz MCU 512KB Flash | Microchip
ATSAME70J19A-ANT

ATSAME70J19A-ANT - ARM Cortex-M7 300MHz MCU 512KB Flash | Microchip

The Microchip ATSAME70J19A-ANT is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), running up to 300 MHz, integrating 512 KB of Flash and 256 KB of SRAM in a 64-pin LQFP (10x10 mm) package supplied on Tape & Reel. It is part of the SAM E70 family and provides high-performance deterministic control for industrial, automotive, and consumer applications. The device also includes a 16-bit Analog Front End (AFE) plus extensive connectivity for system integration. What is a Cortex-M7 microcontroller? An ARM Cortex-M7 microcontroller is a high-end 32-bit MCU core designed for deterministic real-time control with rich DSP capability and a double-precision FPU. Within the hierarchy: Cortex-M7 -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor, the M7 sits at the top of the Cortex-M family, above the M4/M3, and below Cortex-A application cores. The SAM E70 line in particular targets motor control, industrial networking, and graphical HMI where DSP performance and fast interrupt response are required. Key features of the ATSAME70J19A-ANT include 300 MHz core speed with 1500 CoreMark, single-precision and double-precision FPU, 512 KB Flash, 256 KB SRAM, and a 16-bit AFE supporting up to 24-bit sigma-delta conversion. Connectivity options include HS USB with on-chip PHY, CAN-FD, Ethernet MAC, multiple UART/SPI/TWI/I2S, and a 2D graphic LCD controller. The 64-pin LQFP-64 package gives access to most peripherals while keeping the board footprint compact at 10x10 mm. The architecture pairs a Cortex-M7 core with a multi-layer AHB bus matrix, dedicated SRAM banks, and tightly-coupled memory for zero-wait-state code execution. This delivers deterministic latency for real-time control loops. Integrated peripherals include timers, PWM, Quadrature Encoder, ADC, DAC, and EMAC, allowing a single-chip solution for complex mechatronic systems. Typical applications include industrial motor control (FOC for PMSM/BLDC), solar inverters, automation PLCs, EV charging stations, audio processing, and graphical HMI panels. The 300 MHz performance plus DSP extensions also suits digital signal conditioning and predictive maintenance sensor nodes. When designing with this device, allocate decoupling close to every VDD pin and follow the SAME70 PCB layout checklist for high-speed HS USB and Ethernet lines. Use Microchip's MPLAB Harmony 3 framework and ASF for peripheral drivers; supply sequencing must respect the 1.2V core and 3.3V I/O rail relationship described in the datasheet. This page synthesizes distributor pricing for ATSAME70J19A-ANT, lists verified drop-in alternatives in the same 64-pin LQFP footprint, and consolidates practical design notes drawn from the manufacturer datasheet - an information package not available on any single distributor or manufacturer page.

見積もり お問い合わせ
ATSAME70J19B-AN - 300MHz Cortex-M7 MCU, 512KB Flash, 64-LQFP
ATSAME70J19B-AN

ATSAME70J19B-AN - 300MHz Cortex-M7 MCU, 512KB Flash, 64-LQFP

The Microchip Technology ATSAME70J19B-AN is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU) operating at up to 300MHz, integrating 512KB of Flash and 256KB of SRAM in a 64-pin LQFP (10x10 mm) package. It is part of the SAM E70 family, which is engineered for high-performance embedded applications requiring deterministic real-time control combined with rich connectivity and analog peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a heterogeneous set of peripherals such as timers, ADC/DAC, communication controllers, and GPIO. Within the broader semiconductor taxonomy, an MCU belongs to the embedded processor family (microcontroller -> microprocessor -> semiconductor device -> integrated circuit). Cortex-M7 is ARM's highest-performance microcontroller core, adding a double-precision FPU, branch prediction, and tightly-coupled memories (TCM) that enable deterministic sub-microsecond interrupt response. Key features include a single-precision hardware Floating Point Unit, 16KB of I-cache and 16KB of D-cache, 384KB of additional SRAM available for system use, a 12-bit 2 Msps Analog Front End (AFE), a 12-bit DAC, dual CAN-FD controllers, high-speed USB, Ethernet MAC, and an extended temperature operating range suited to industrial and automotive-grade environments. According to the Microchip SAM E70 datasheet, the device supports up to 300MHz CPU clock with 1.5 DMIPS/MHz and 2.14 CoreMark/MHz, providing DSP-class signal processing throughput in a deterministic microcontroller footprint. From an architectural perspective, the Cortex-M7 core is paired with a multi-layer AHB/APB bus matrix that allows simultaneous DMA and CPU accesses without contention. The SAM E70 family integrates hardware cryptographic accelerators, a true random number generator (TRNG), and secure boot support, hardening the platform against firmware tampering. The on-chip 12-bit AFE delivers up to 24 analog inputs and the 12-bit DAC supports both continuous and single-output modes, enabling closed-loop control of motors, power converters, and audio stages. Typical applications include industrial motor control and field-oriented control (FOC) drives, factory automation PLCs, building automation HVAC controllers, audio processing and high-fidelity consumer audio, medical instrumentation such as patient monitors and infusion pumps, automotive body and chassis ECUs, and IoT edge nodes with on-device analytics. The 64-LQFP package supports standard reflow soldering and is friendly to hand-prototyping and 4-layer PCB designs. When designing with this device, ensure that the firmware uses the IAR, Keil, or MPLAB X IDE toolchain with the appropriate CMSIS pack, and that decoupling is provided per the reference schematic - at minimum a 100nF X7R on every VDD pin plus a bulk 4.7uF near the regulator. The internal voltage regulator must be sequenced correctly at power-up; consult the datasheet 'Power Considerations' section to avoid in-rush latch-up. This page synthesizes verified distributor pricing, drop-in alternative listings, and practical design notes not aggregated on any single manufacturer or distributor product page, giving procurement and design engineers a single decision-grade reference for the ATSAME70J19B-AN.

見積もり お問い合わせ
ATSAME70J19B-ANT - 300MHz Cortex-M7 MCU 512KB Flash LQFP-64
ATSAME70J19B-ANT

ATSAME70J19B-ANT - 300MHz Cortex-M7 MCU 512KB Flash LQFP-64

The Microchip Technology ATSAME70J19B-ANT is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), delivering up to 300 MHz core speed, 512 KB of Flash, and up to 256 KB of multi-port SRAM in a 64-pin LQFP (10x10 mm) package. It belongs to the SAM E70/S70/V70/V71 family and is tailored for industrial control, IoT gateways, and connected automotive body/comfort applications requiring deterministic real-time response. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals (ADC, timers, communication interfaces). The Cortex-M7 core specifically adds a double-precision FPU, DSP extensions, and an instruction/data cache, placing it at the top of the Cortex-M performance hierarchy (Cortex-M7 > Cortex-M4 > Cortex-M3 > Cortex-M0+). Within Microchip's portfolio, the SAM E70 sits in the high-performance MCU tier, between the lower-cost SAMD5x Cortex-M4 family and the Cortex-M7-based SAME70/SAMS70/SAMV71 series. Key features include IEEE 754 single/double-precision floating-point arithmetic, 16 KB instruction cache plus 16 KB data cache, Tightly Coupled Memory (TCM) interfaces, embedded Trace Macrocell (ETM) for instruction trace, and a 1 MSPS 12-bit ADC. Peripherals span Ethernet MAC, CAN-FD, USB 2.0 High-Speed with on-chip PHY, three CAN-FD controllers, multiple USART/UART/SPI/TWI interfaces, an external bus interface (EBI) for SRAM/SDRAM expansion, and a camera interface. An integrated cryptographic accelerator and True Random Number Generator (TRNG) support secure boot and TLS applications. The SAM E70 architecture uses a 6-layer AHB/AXI bus matrix to keep CPU, DMA, Ethernet, and display streams concurrent without bus starvation. The 300 MHz Cortex-M7 delivers 1500 CoreMark / 600 DMIPS, roughly 2x the performance of a Cortex-M4 at the same frequency. Hardware DSP and SIMD instructions accelerate audio codecs and motor-control loops, while the FPU removes the need for software floating-point emulation in PLC and instrumentation code. Typical applications include industrial Ethernet slaves (EtherCAT, PROFINET, EtherNet/IP), building-automation controllers, audio processing and USB audio interfaces, automotive body and infotainment modules, IoT gateways with TLS offload, motor-control FOC inverters, and graphical HMI with TFT LCD. The wide 1.62V-3.6V I/O supply with internal LDO simplifies mixed-voltage designs. When designing with this device, allocate a 4-layer PCB with the EBI bus carefully length-matched if SDRAM is used, and ensure the 12 MHz crystal load capacitance matches the crystal datasheet (typically 12-20 pF). Use the ASF4 / MPLAB Harmony 3 framework for peripheral drivers; bare-metal register-level coding is feasible but reduces portability across the SAM E70/S70/V70/V71 family. The crypto accelerator requires a firmware library; verify license terms if distributing binary firmware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, giving engineers a single reference for sourcing and second-source planning.

見積もり お問い合わせ
ATSAME70J20A-ANT - 300MHz Cortex-M7 MCU 1MB Flash 64-LQFP
ATSAME70J20A-ANT

ATSAME70J20A-ANT - 300MHz Cortex-M7 MCU 1MB Flash 64-LQFP

The Microchip Technology ATSAME70J20A-ANT is a high-performance ARM Cortex-M7 based 32-bit microcontroller from the SAM E70 family, delivering up to 300 MHz CPU clock, 1 MB of Flash, and 384 KB of SRAM in a 64-pin LQFP (10x10 mm) surface-mount package supplied on Tape & Reel. The device targets industrial, automotive, and IoT edge applications that demand real-time DSP, floating-point math, and rich connectivity, including Ethernet MAC, USB 2.0 High-Speed, CAN-FD, and multiple USART/SPI/I2C interfaces. What is a Cortex-M7 microcontroller? The ARM Cortex-M7 is a high-end 32-bit microcontroller core featuring a 6-stage superscalar pipeline with branch prediction, single-precision and double-precision floating-point unit (FPU), and tightly-coupled memory (TCM) for deterministic latency. The SAM E70 series extends the Cortex-M7 with Microchip's proprietary peripheral set, on-chip high-speed USB 2.0 PHY, 12-bit ADC up to 2 Msps, and an integrated 10/100 Ethernet MAC with IEEE 1588 PTP hardware support. This hierarchy places the part above Cortex-M4 controllers and below Cortex-A application processors in performance and integration. Key specifications include 300 MHz core with 600 DMIPS and 1284 CoreMark performance, 1 MB Flash with ECC, 384 KB SRAM, an external bus interface for SDRAM, and a high-speed USB 2.0 PHY supporting Device, Host, and OTG modes. The 12-bit ADC provides up to 24 channels and 2 Msps conversion rate, while the HSMCI interface supports SD/SDHC cards. The integrated EMAC with 1588 PTP makes the device especially attractive for industrial Ethernet and motor-control protocols. The architecture couples the Cortex-M7 core to an AHB/APB matrix with multi-layer bus arbitration, allowing simultaneous DMA-driven Ethernet, USB, and HSMCI transfers without CPU intervention. Hardware cryptography (AES, TRNG) and a Secure Bootloader enable tamper-resistant firmware. The on-chip FPU and DSP extensions accelerate audio codecs, motor-control loops, and sensor fusion at very low power. Typical applications include industrial Ethernet gateways, PLC and motor-control servo drives, automotive infotainment and ADAS sensor hubs, medical patient monitors, and connected IoT edge nodes. The combination of LQFP-64 footprint and broad peripheral set also makes it a drop-in upgrade for designs previously built around Cortex-M4 devices. When designing with this part, allocate the 64-LQFP ground pins properly to maintain signal integrity on the high-speed USB and Ethernet pairs. The 1.2V internal core regulator requires an external 1uF decoupling capacitor; placing it within 3 mm of the VCORE pin reduces startup jitter and improves EMC performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAME70J20B-AN - 300MHz Cortex-M7 MCU, 1MB Flash | Microchip
ATSAME70J20B-AN

ATSAME70J20B-AN - 300MHz Cortex-M7 MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME70J20B-AN is a 32-bit ARM Cortex-M7 microcontroller running at up to 300 MHz with 1 MB of embedded Flash and 384 KB of SRAM, housed in a 64-lead LQFP (10x10 mm) package. It integrates a floating-point unit (FPU), a 16 KB instruction cache and 16 KB data cache, and delivers 1500 DMIPS / 645 CoreMark-class performance for high-throughput embedded control. A microcontroller (MCU) is a self-contained computer on a single chip that combines a processor core, non-volatile program memory, volatile data memory, and a set of peripherals such as timers, serial interfaces, and analog converters. MCUs sit at the heart of embedded systems, forming the boundary between the physical world (sensors, actuators, motors) and digital processing. Within the product hierarchy, the ATSAME70J20B-AN is a 32-bit ARM Cortex-M7 MCU in the SAM E70 family, which belongs to the broader class of 32-bit microcontrollers and, above that, to embedded processors and semiconductors. Key features include 1 MB Flash with 384 KB SRAM, a 12-bit ADC with up to 24 channels, dual CAN-FD controllers, USB 2.0 High-Speed with on-chip transceiver, 10/100 Ethernet MAC, and a wide 1.7 V to 3.6 V supply range. The Cortex-M7 core with double-precision FPU and DSP extensions enables single-cycle MAC operations, making the device suitable for motor control, audio processing, and real-time signal conditioning. The SAM E70 architecture uses a multi-layer AHB bus matrix with 24 DMA channels, allowing peripherals to move data without CPU intervention. The embedded Flash accelerator and dual 16 KB caches reduce wait states at 300 MHz, sustaining near-zero-wait-state execution for deterministic control loops. Typical applications include industrial motor drives, building automation gateways, IoT edge nodes with Ethernet/CAN connectivity, audio equipment, and test-and-measurement instruments. The 64-LQFP package with 114 GPIO pins provides ample I/O for multi-peripheral designs. When designing with this device, ensure the VDDCORE and VDDPLL rails are decoupled with low-ESR ceramic capacitors and that the 12 MHz main crystal is placed close to the XIN/XOUT pins to minimize jitter. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAME70J20B-ANT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip
ATSAME70J20B-ANT

ATSAME70J20B-ANT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip

The Microchip Technology ATSAME70J20B-ANT is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU operating at up to 300 MHz, featuring 1 MB of Flash and 384 KB of multi-port SRAM, packaged in a 64-pin LQFP (10x10 mm). According to distributor data, the device integrates a 16-bit AFE-EMAC, HS USB, CAN-FD, and a TFT LCD controller, making it one of the most feature-dense Cortex-M7 parts in Microchip's SAM E70 lineup. An ARM Cortex-M7 microcontroller is a 32-bit embedded processor core from the Cortex-M family that targets high-performance deterministic real-time applications such as motor control, industrial automation, and audio processing. The Cortex-M7 supersedes Cortex-M4 by adding a double-precision FPU, instruction/data caches, and a 6-stage superscalar pipeline, placing it in the hierarchy: Cortex-M7 -> Cortex-M -> ARMv7-M architecture -> 32-bit MCU -> embedded microcontroller. The 'E' in SAM E70 indicates the 'Enhanced' family aimed at connectivity and graphics. Key features of the ATSAME70J20B-ANT include a single-precision/double-precision hardware FPU, 16 KB instruction cache plus 16 KB data cache, tightly-coupled memory for zero-wait-state execution, and a multi-port SRAM architecture (MRAM) that allows simultaneous CPU and DMA access. The device operates from 1.62V to 3.6V core supply and supports industrial temperature grades up to +105 C. Communication peripherals include HS USB with on-chip PHY, dual CAN-FD, three FLEXCOMs (USART/SPI/TWI), three CAN-FD channels per the family datasheet, and an Ethernet MAC with 1588 PTP support. The architecture combines deterministic interrupt response with DSP extensions (SIMD MAC instructions), enabling audio codec processing, predictive motor control algorithms, and high-bandwidth sensor fusion directly on-chip. The dual-bank Flash with read-while-write (RWW) capability supports in-field firmware upgrades without halting the application. This part is best suited to designs requiring high CPU throughput (1500+ CoreMark) combined with rich connectivity in a single IC. Typical applications include industrial motor drives (FOC for PMSM/BLDC), IoT edge gateways with Ethernet, automotive body and infotainment subsystems, and graphics HMI panels. In audio applications, the Cortex-M7's DSP extensions accelerate sample-rate conversion and active noise cancellation. When designing with the ATSAME70J20B-ANT, ensure the PCB layout provides a solid ground plane under the LQFP-64 footprint, place 100 nF decoupling on every VDD pin, and route the HS USB differential pair with 90 ohm impedance. The MRAM multi-port controller benefits from cache-coherent DMA configurations to avoid stale-data hazards during peripheral bursts. This page synthesizes distributor pricing, drop-in alternatives from the SAME70 family and competitor Cortex-M7 parts, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAME70J21A-AN - 300MHz Cortex-M7 MCU, 2MB Flash, LQFP-64
ATSAME70J21A-AN

ATSAME70J21A-AN - 300MHz Cortex-M7 MCU, 2MB Flash, LQFP-64

The Microchip Technology ATSAME70J21A-AN is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), operating at up to 300 MHz and integrating 2 MB of Flash and 384 KB of SRAM in a 64-pin LQFP (10x10 mm) package. This SAM E70 family member combines Cortex-M7 DSP extensions, double-precision FPU, and a rich peripheral set including high-speed USB, Ethernet MAC, CAN-FD, and 16-bit HS USB PHY for connectivity-intensive embedded designs. The part targets industrial-grade temperature ranges (-40C to +85C) and is supplied in a tape-and-reel packaging format per the 'AN' suffix. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of on-chip peripherals such as timers, communication controllers, and ADCs on a single die. Within the embedded hierarchy, MCUs sit below microprocessors (MPUs) in integration but above general-purpose logic ICs in functional scope; the ARM Cortex-M7 architecture specifically targets deterministic real-time control with DSP-grade signal processing and hardware floating point, making it a frequent choice for motor control, audio processing, and industrial networking applications. Key features of the ATSAME70J21A-AN include a 300 MHz maximum CPU clock, 2 MB embedded Flash for code and data storage, 384 KB SRAM for runtime working memory, a 16-bit AHB peripheral bus matrix, an integrated High-Speed USB 2.0 device/host PHY, an Ethernet MAC (GMAC), dual CAN-FD controllers, a 12-bit ADC up to 2 MSPS, and a TFT LCD controller. The Cortex-M7 core delivers 5 CoreMark/MHz and 2.14 CoreMark/MHz in floating-point benchmarks, with tightly-coupled memory (TCM) ports for deterministic low-latency code execution. The chip also includes an event system, a configurable interrupt controller (NVIC), and a cryptographic accelerator supporting AES, SHA, and TRNG. Typical applications include industrial motor control (BLDC/PMSM FOC), building automation and HVAC controllers, human-machine interface (HMI) panels with TFT displays, audio processing and Class-D amplifier front-ends, smart-grid energy meters, networked sensor hubs, and USB-connected test/measurement equipment. Designers select this MCU when deterministic Cortex-M7 performance with Ethernet and USB connectivity is required in a single chip without an external MPU subsystem. When designing with this MCU, ensure the VDDIO and VDDCORE decoupling network follows the recommended 100 nF + bulk capacitor topology; for high-speed USB operation, the VDDPLL and VDDUTMII rails require additional filtering. QSPI/SMC interfaces for external memory should be routed with 50 ohm impedance-controlled traces and length-matched within the bus to maintain signal integrity at 100 MHz DDR modes.

見積もり お問い合わせ
ATSAME70J21A-ANT - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
ATSAME70J21A-ANT

ATSAME70J21A-ANT - 300MHz Cortex-M7 MCU 2MB Flash | Microchip

The Microchip Technology ATSAME70J21A-ANT is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, delivering up to 300MHz operation and integrating 2048 Kbytes of Flash plus 384 Kbytes of SRAM in a 64-pin LQFP (10x10 mm) package. It belongs to the SAM E70 family, designed for demanding embedded applications requiring rich connectivity, high-speed analog, and deterministic real-time control. An ARM Cortex-M7 microcontroller is a 32-bit processor core built on the ARMv7-M architecture with single-precision and double-precision floating-point support, superscalar pipeline, and tightly-coupled memory for deterministic interrupt response. MCUs sit at the top of the embedded hierarchy: microcontroller -> embedded controller -> semiconductor IC, and are the brain of every connected and motor-driven product. Cortex-M7 specifically targets high-performance DSP, audio processing, and graphical HMI workloads that exceed the throughput of Cortex-M4. Key features of the ATSAME70J21A-ANT include 300 MHz core with DSP extensions, 2MB Flash, 384KB SRAM, a 16-bit external bus interface (EBI) for SDRAM expansion, high-speed USB with on-chip PHY, and a 12-bit ADC running up to 2 Msps. The integrated FPU and Instruction Cache (16KB) accelerate compute-intensive signal-processing loops, while dedicated peripherals such as CAN, Ethernet (GMAC), and HS USB enable industrial connectivity without external ICs. Architecturally, the device combines ARM Cortex-M7 superscalar pipeline with 4KB instruction cache plus 4KB configurable cache, 384KB SRAM organized for single-cycle access, and a multilayer AHB bus matrix that lets CPU and DMA peripherals move data concurrently without starving either side. Power is managed via an on-chip voltage regulator drawing from a single 1.2V/3.3V rail while offering multiple low-power modes (Sleep, Wait, Backup). Typical applications include industrial automation controllers, motor drives (FOC), audio processing DSPs, automotive infotainment, graphical HMI panels, and IoT edge nodes. The wide peripheral set and LQFP-64 footprint also make the part popular for evaluation boards and rapid prototyping where hand-soldering and breadboarding are helpful. Designers should review the SAM E70 datasheet for the recommended 32.768 kHz crystal and PLL filter network. Decoupling requires at minimum a 100 nF + 4.7 µF combination per VDDCORE/VDDIO pair, and trace lengths to the crystal must be kept below 5 mm with a guard ground to maintain jitter-free operation. This page synthesizes Microchip official datasheet figures, distributor pricing, and a curated cross-reference of SAME70/SAMS70/SAMV71 family parts not found in a single datasheet PDF - giving engineers a one-stop sourcing reference.

見積もり お問い合わせ
ATSAME70J21B-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
ATSAME70J21B-AN

ATSAME70J21B-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip

The Microchip Technology ATSAME70J21B-AN is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), operating at up to 300 MHz, integrating 2 MB of Flash and 384 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It is a member of the SAM E70 family of high-performance flash microcontrollers designed for embedded applications that require deterministic real-time response and rich connectivity. The device is supplied from a 1.62 V to 3.6 V single rail, supporting both 1.8 V and 3.3 V system designs from a single part. What is a Cortex-M7 microcontroller? A Cortex-M7 microcontroller is a 32-bit RISC processor core from Arm designed for high-performance embedded applications requiring DSP, single-precision/double-precision floating-point arithmetic, and deterministic interrupt response. The Cortex-M7 sits above Cortex-M4 in the Arm Cortex-M hierarchy and below Cortex-A application processors. Within the broader taxonomy, the ATSAME70J21B-AN belongs to the following chain: ARM Cortex-M7 -> 32-bit RISC microcontroller -> microcontroller unit (MCU) -> semiconductor. The SAM E70 family specifically targets motor control, industrial networking, audio, and graphical HMI designs where M7-class compute exceeds M4 capabilities. Key features of the ATSAME70J21B-AN include a 16 KB instruction cache and 16 KB data cache with single-cycle access from flash through the tightly-coupled memory (TCM) interface, a single-precision hardware Floating Point Unit (FPU), DSP extensions, and a Memory Protection Unit (MPU). The peripheral set includes a high-speed USB 2.0 Full-Speed and High-Speed with on-chip PHY, a 10/100 Mbps Ethernet MAC with IEEE 1588 support, a CAN-FD controller, multiple USART/UART/SPI/TWI/I2S interfaces, a 12-bit ADC, and a 32-bit timer/counter block. The integrated quadrature decoder and PWM channels are tailored for field-oriented motor control loops. The architecture combines a 6-layer bus matrix with dedicated peripheral DMA channels and an event system to support deterministic real-time performance. The dual-bank Flash with read-while-write (RWW) capability allows live firmware updates without halting application code, which is valuable for industrial field devices requiring in-service upgrades. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), factory automation controllers, building automation gateways, audio processing equipment, point-of-sale terminals, and high-end graphical HMI panels. The combination of Cortex-M7 DSP, Ethernet, USB, and CAN-FD makes it well-suited to connected industrial nodes. When designing with this part, plan for proper decoupling: 100 nF on each VDD pin plus a 4.7 µF bulk capacitor. The 64-pin LQFP exposes fewer peripherals than the larger 144-pin variants, so confirm the specific peripheral mix against the pinout table before selecting the package. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application notes, and engineering design guidance not consolidated on a single manufacturer page.

見積もり お問い合わせ
ATSAME70N19A-AN - ARM Cortex-M7 MCU 300MHz 512KB Flash LQFP-100 | Microchip
ATSAME70N19A-AN

ATSAME70N19A-AN - ARM Cortex-M7 MCU 300MHz 512KB Flash LQFP-100 | Microchip

The Microchip Technology ATSAME70N19A-AN is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU) operating at up to 300 MHz, featuring 512 KB of Flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It belongs to the SMART SAM E70 family of flash microcontrollers designed for embedded applications requiring high computational throughput and rich connectivity peripherals. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable input/output peripherals. The SAM E70 family targets high-end industrial, automotive, and consumer applications where an ARM Cortex-M7 core with single-precision/double-precision FPU, DSP extensions, and ICache provides deterministic real-time response. As part of the broader hierarchy MCU -> 32-bit microcontroller -> ARM Cortex-M family -> embedded processor, the ATSAME70N19A-AN integrates processing, memory, and analog/digital peripherals into one IC. Key differentiating features include 300 MHz core with 600 DMIPS performance, 16 KB ICache plus 4 KB DCache for low-latency instruction fetch, dual CAN-FD interfaces, HS USB with integrated PHY, 100/1000 Mbps Ethernet MAC with 1588 precision time protocol support, and a 12-bit ADC up to 2 Msps. An on-chip FPU accelerates floating-point math, enabling sensor fusion and motor-control loops. Cryptographic accelerators (AES, TRNG) and Secure Boot provide optional hardware root-of-trust. Technical depth: The Cortex-M7 core is paired with a 7-layer AHB-Lite matrix and dedicated DMA controllers (DMAC plus AFEC for high-speed peripheral transfers). The device supports 1.8V, 2.5V, and 3.3V I/O domains, allowing direct interfacing with both 1.8V sensors and 3.3V peripherals. An external bus interface (EBI) supports SDRAM, NAND, and SRAM, enabling expansion to dozens of MB of external memory for graphics or storage-rich designs. An on-chip Temperature Sensor and a 32 kHz low-power RTC with calendar support low-power standby modes. Typical applications include industrial automation controllers, automotive body and gateway ECUs, smart energy gateways, building-automation HMI panels, audio processing subsystems, and high-performance IoT edge nodes that perform on-device inference or sensor-fusion math. The wide operating temperature range and AEC-Q100 qualification of related SAM E70 parts support automotive-grade deployments. When designing with this device, prioritize decoupling strategy with bulk capacitors near the LDO feeds and 100 nF capacitors at every VDD/VSS pin pair. Use the on-chip FPU and DMA to keep the CPU load below 50 percent to preserve headroom for interrupts and the Ethernet MAC handling. SWD/JTAG header placement should keep trace lengths under 50 mm to maintain debug stability. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, application notes, and engineering design guidance not found in the manufacturer datasheet alone, providing a 360-degree decision reference for the ATSAME70N19A-AN in new designs and pin-compatibly upgrades from earlier SAM S70/V71 variants.

見積もり お問い合わせ
ATSAME70N19A-ANT - ARM Cortex-M7 MCU 300MHz 512KB Flash | Microchip
ATSAME70N19A-ANT

ATSAME70N19A-ANT - ARM Cortex-M7 MCU 300MHz 512KB Flash | Microchip

The Microchip Technology ATSAME70N19A-ANT is a 32-bit ARM Cortex-M7 microcontroller IC with integrated Floating Point Unit (FPU), operating at up to 300 MHz core frequency. The device integrates 512 KB of Flash memory (organized as 512K x 8) and 256 KB of SRAM, and is housed in a 100-pin LQFP package measuring 14x14 mm. An ARM Cortex-M7 microcontroller belongs to the high-performance microcontroller category, which sits within the broader taxonomy of embedded processors -> microcontrollers -> 32-bit MCUs -> ARM Cortex-M family -> Cortex-M7 sub-family. Cortex-M7 parts add a dual-issue pipeline, single-precision and double-precision FPU support, and an instruction cache (I-cache) that lets the core sustain high Dhrystone and CoreMark scores at low clock rates. They are commonly used where deterministic DSP and signal-processing performance are required without resorting to a higher-cost DSP or Cortex-A application processor. Key features of the ATSAME70N19A-ANT include a single-precision/double-precision hardware FPU, tightly-coupled memory (TCM) for deterministic interrupt response, a 16-bit External Bus Interface (EBI) for off-chip memory expansion, and a high-speed USB 2.0 Full-Speed device/host with on-chip PHY. Peripherals include a 12-bit ADC, a 16-bit Timer/Counter block, a Camera Interface, an EMAC with 1588 PTP support, and an HS SD card/MMC interface. The device operates from a 1.62V to 3.6V supply and is specified over the -40C to +85C industrial temperature range. Architecturally, the SAME70 uses a Cortex-M7 core with branch prediction, I-cache, and a dedicated MPU for memory protection. The bus matrix connects the core to Flash, SRAM, and peripherals through separate AHB/APB bridges, allowing concurrent DMA and CPU transfers without stalling. The on-chip voltage regulator simplifies single-rail 3.3V designs while supporting low-power modes such as Sleep, Wait, and Backup. Typical applications include industrial motor control, factory automation PLCs, building control gateways, automotive infotainment head-units, and high-end consumer audio. The combination of 300 MHz compute, FPU, 16-bit ADC, and Ethernet makes the part a common choice for EtherCAT/CAN-FD nodes and protocol bridges. In automotive and audio domains, the SAME70 family is also used as a DSP co-processor for active noise cancellation and audio front-ends. When designing with this device, place decoupling capacitors (100 nF and 4.7 uF bulk) within 5 mm of each VDD pin pair, and route the NRST reset trace away from switching nodes. Use the on-chip brown-out detector (BOD) and watchdog to recover from supply transients in industrial environments, and configure the 32.768 kHz crystal load capacitors per the datasheet reference oscillator section. This page synthesizes real-time distributor pricing, pin-compatible SAME70/SAMS70 family drop-in alternatives, and practical PCB/thermal design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAME70N19A-CN - 300MHz Cortex-M7 MCU 512KB Flash | Microchip
ATSAME70N19A-CN

ATSAME70N19A-CN - 300MHz Cortex-M7 MCU 512KB Flash | Microchip

The Microchip Technology ATSAME70N19A-CN is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), operating at up to 300 MHz and featuring 512 KB of Flash memory plus 256 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. The device is part of the SAME70 family and integrates an extensive peripheral set including Ethernet MAC, USB 2.0 High-Speed, CAN-FD, HS USB, and a TFT LCD controller for graphical HMI applications. An ARM Cortex-M7 microcontroller is a 32-bit RISC processor core designed by ARM Holdings for embedded applications requiring high computational throughput, deterministic real-time response, and efficient DSP performance. The Cortex-M7 architecture extends the Cortex-M4 by adding a double-precision FPU, instruction and data caches, and tightly-coupled memory (TCM) interfaces. Within the broader taxonomy, a Cortex-M7 MCU sits in the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. SAME70 devices operate from a 1.2V/3.3V split-rail supply and target industrial, automotive, and connectivity-rich IoT gateways. Key differentiating features of the ATSAME70N19A-CN include 16 KB of instruction cache and 16 KB of data cache with TCM support, a hardware Cryptography Accelerator (AES, TRNG), dual CAN-FD controllers, 12-bit ADC up to 1.5 Msps, a TFT LCD controller with overlay support, and a 16-bit External Bus Interface (EBI) for memory expansion. The 300 MHz core delivers 600 DMIPS / 300 CoreMark, placing it among the highest-throughput Cortex-M7 microcontrollers available in a commercial-grade (non-automotive, -40C to +85C) temperature range. Architecturally the device pairs the high-speed core with tightly-coupled memory (ITCM/DTCM) for deterministic interrupt latency under 15 ns, plus an embedded SRAM-backed regulator and brown-out detector. A multi-layer AHB/APB bus matrix gives parallel access to peripheral DMA channels, enabling simultaneous Ethernet, USB, and display refresh without bus contention. Typical applications include industrial Ethernet gateways, motion-control drives, building-automation controllers, HMI panels with TFT displays, and motor-control inverters with CAN-FD networking. The combination of high-speed USB 2.0 and on-chip MAC makes it well-suited for networked sensor hubs that need both wired connectivity and moderate local processing. When designing with the ATSAME70N19A-CN, special attention is required to PCB escape routing for the 0.8 mm-pitch TFBGA-100, decoupling of the 1.2V core rail with bulk plus high-frequency MLCC caps, and I/O voltage selection for 3.3V-tolerant signals. The internal regulator demands a well-designed PCB thermal copper pour to dissipate peak load transients. This page synthesizes distributor pricing, drop-in alternatives from the SAME70 / SAMS70 family, and practical PCB design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAME70N19A-CNT - 300MHz Cortex-M7 MCU, 512KB Flash | Microchip
ATSAME70N19A-CNT

ATSAME70N19A-CNT - 300MHz Cortex-M7 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME70N19A-CNT is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), delivering up to 300 MHz core clock speed with 512 KB of Flash and 256 KB of SRAM, packaged in a 100-pin TFBGA (9x9 mm) industrial-temperature grade. According to the Microchip product page, the SAM E70 family integrates an FPU supporting single and double-precision IEEE 754 floating-point operations, a 16-bit DDR/LPDDR/LPSDR SDRAM controller, and high-speed USB with integrated PHY. What is an ARM Cortex-M7 microcontroller? A Cortex-M7 microcontroller (MCU) is a 32-bit system-on-chip combining a Harvard-bus processor core with on-chip Flash program memory, SRAM data memory, and a rich set of peripherals. It belongs to the Cortex-M family within the broader category of microcontrollers and embedded processors, sitting below Cortex-A application processors in performance/power. The Cortex-M7 specifically adds dual-issue superscalar pipeline, branch prediction, and tightly-coupled memory (TCM), targeting signal processing, motor control, and industrial connectivity workloads. Key features of the ATSAME70N19A-CNT include an integrated 12-bit ADC up to 2 Msps, a 2-channel 12-bit DAC, multiple high-speed serial interfaces (USART, SPI, TWI), HS USB 2.0 with on-chip PHY, dual CAN-FD controllers, an Ethernet MAC with 1588 PTP, and hardware cryptographic accelerators for AES, SHA, and TRNG. The 100-pin TFBGA package supports the device's 300 MHz operation and signal-integrity demands of high-speed peripherals. Architecturally, the ATSAME70N19A-CNT combines a 6-stage dual-issue superscalar Cortex-M7 core with 16 KB of I-cache and D-cache, 4 KB of I-TCM and D-TCM, and an advanced bus matrix connecting peripherals to the TCM via dedicated paths. This dual-mode memory architecture (cache + TCM) gives deterministic latency for real-time tasks while preserving bandwidth for code execution from Flash. Typical applications include industrial automation and motor control (Fieldbus + FPU for sensorless FOC), automotive body and connectivity modules, building automation gateways, smart-grid and metering endpoints, audio/voice front-end DSP, point-of-sale terminals, and IoT edge nodes requiring Ethernet or HS USB connectivity. Key design considerations: ensure the TFBGA-100 PCB footprint uses NSMD pads with via-in-pad or microvia technology, follow Microchip's decoupling guidelines (1 nF + 100 nF + bulk per VDD domain), and confirm SDRAM trace length matching if using the external bus. The -I temperature grade targets -40C to +85C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

見積もり お問い合わせ
ATSAME70N19B-AN - 300MHz ARM Cortex-M7 MCU 512KB Flash | Microchip
ATSAME70N19B-AN

ATSAME70N19B-AN - 300MHz ARM Cortex-M7 MCU 512KB Flash | Microchip

The Microchip Technology ATSAME70N19B-AN is a 32-bit ARM Cortex-M7 microcontroller with FPU operating up to 300 MHz, integrating 512 KB of Flash and 256 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It belongs to the SAM E70 family of high-performance flash microcontrollers aimed at connectivity, industrial control, and graphical HMI applications that require deterministic real-time response. What is a microcontroller? A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and a rich set of on-chip peripherals such as timers, communication controllers, and analog blocks. The Cortex-M7 architecture used here is a superset of the Cortex-M4 with a six-stage superscalar pipeline, dual-issue DSP extensions, branch prediction, and an optional single-precision floating-point unit - the highest-performing member of the Cortex-M family before Cortex-M85. Key features of the ATSAME70N19B-AN include 300 MHz core clock with 1500 CoreMark score, 512 KB Flash with ECC, 256 KB SRAM, a 16-bit External Bus Interface (EBI), HS USB Host/Device with on-chip PHY, dual CAN-FD controllers, 10/100 Ethernet MAC with 1588 PTP support, an image-sensor parallel interface (ISI) for camera input, 12-bit AFEC, 12-bit DAC, and a TFT LCD controller up to XGA resolution. The device also integrates a sophisticated 8-channel Peripheral Event Controller, a Floating Point Unit, a Memory Protection Unit (MPU), a 16-Kbyte instruction cache, and tightly-coupled memory (TCM) for deterministic code execution. Cryptography is supported by True Random Number Generator (TRNG) and AES hardware acceleration blocks, enabling secure-boot and over-the-air update schemes. Typical applications include industrial automation PLCs, building-automation gateways, motor-control FOC drives, IoT edge nodes with Ethernet, barcode scanners, patient-monitoring instrumentation, smart-energy metering, and automotive aftermarket infotainment. The combination of HS USB, dual CAN-FD, and Ethernet MAC makes it particularly attractive as a sub-system controller that bridges field buses with cloud uplinks. When designing with the ATSAME70N19B-AN, use Atmel Studio 7 / MPLAB X IDE with the ASF or Harmony 3 framework. Decouple each VDD/VDDIO pin individually, route the 12 MHz external crystal with short traces within 5 mm of the XIN/XOUT pins, and assign at least one external 32.768 kHz crystal for RTC accuracy. The 100-LQFP package supports single-layer prototype boards but benefits from a 4-layer stack-up for EMI-sensitive applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAME70N19B-CNT - Cortex-M7 MCU 300MHz 512KB Flash 100-TFBGA
ATSAME70N19B-CNT

ATSAME70N19B-CNT - Cortex-M7 MCU 300MHz 512KB Flash 100-TFBGA

The Microchip Technology ATSAME70N19B-CNT is a high-performance 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU) operating at up to 300 MHz, integrating 512 KB of Flash and 256 KB of SRAM in a 100-pin TFBGA (9x9 mm) package. According to the Microchip product page, the device belongs to the SAME70 family, which combines DSP capability, single-precision floating-point hardware, and a rich set of connectivity peripherals for industrial and consumer embedded designs. A microcontroller (MCU) is an integrated circuit containing a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of on-chip peripherals such as timers, ADC/DAC, communication controllers (USART/SPI/TWI), and GPIO. The ARM Cortex-M7 architecture extends the Cortex-M4 instruction set with a superscalar pipeline, dual-issue load/store, and an IEEE 754 single-precision FPU, placing the SAME70 in the high-performance tier of Cortex-M microcontrollers — between mainstream Cortex-M4 devices and application processors. SAME70 MCUs sit within the broader hierarchy of microcontrollers -> embedded processors -> semiconductor ICs. Key features of the ATSAME70N19B-CNT include 512 KB Flash, 256 KB SRAM, a 300 MHz maximum CPU clock, an integrated FPU, and a High-Speed USB controller with on-chip PHY. The part is offered in a 100-ball Thin-profile Fine-pitch BGA (TFBGA) measuring 9x9 mm, providing dense I/O access in a compact footprint suitable for space-constrained designs. The industrial-grade temperature range and integrated peripherals reduce BOM cost by replacing external communication or memory chips. The SAME70 architecture integrates a multi-layer bus matrix that allows simultaneous transfers between the CPU, DMA, and peripheral subsystems. The on-chip Flash accelerator and instruction cache deliver deterministic interrupt latency and enable sustained DSP throughput suitable for motor control, audio codecs, and complex sensor fusion. The integrated Ethernet MAC and HS USB PHY simplify connectivity in industrial gateways and connected sensor nodes. Typical applications include industrial motor control (FOC for BLDC and PMSM drives), high-speed data acquisition and signal processing, building automation controllers, IoT edge nodes with Ethernet connectivity, audio processing, and HMI subsystems with display support. The combination of DSP extensions, large SRAM, and high-speed peripherals also makes it suitable for point-of-sale terminals and medical instrumentation. When designing with the ATSAME70N19B-CNT, designers should carefully consider PCB routing for the BGA fan-out, decoupling strategy for the 1.2V core rail, and trace impedance for the Ethernet and HS-USB differential pairs. The TFBGA package requires reflow profiling that matches the package's thermal mass to avoid solder joint defects. This page synthesizes distributor pricing, drop-in alternatives within the SAME70 family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAME70N20A-AN - 300MHz Cortex-M7 MCU, 1MB Flash, LQFP-100
ATSAME70N20A-AN

ATSAME70N20A-AN - 300MHz Cortex-M7 MCU, 1MB Flash, LQFP-100

The Microchip ATSAME70N20A-AN is a high-performance 32-bit ARM Cortex-M7 microcontroller with floating-point unit (FPU), operating at up to 300 MHz and integrating 1 MB of Flash alongside 384 KB of SRAM in a 100-pin LQFP package. The Cortex-M7 core delivers 1500 CoreMark and supports DSP extensions plus double-precision FPU, enabling single-chip execution of advanced motor control, audio processing, and Ethernet-connected industrial nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO into one package. The Cortex-M7 architecture sits at the top of the ARM Cortex-M family hierarchy (Cortex-M0 -> M3 -> M4 -> M7) and is the highest-performance tier targeting deterministic real-time DSP and floating-point workloads. The ATSAME70N20A-AN therefore spans the use cases previously reserved for separate DSP or external-FPGA coprocessors while remaining a microcontroller-class device with deterministic interrupt response. Key features include a 16-bit stereo interface, high-speed USB Host/Device with on-chip HS PHY, two CAN-FD controllers, Ethernet MAC with 1588 PTP support, an image sensor interface, an 8/12-bit Parallel Capture, and a 12-bit 2 MSPS ADC. Cryptographic accelerators (AES-256, SHA, TRNG) and secure-boot with on-chip OTP fuse make the part suitable for connected industrial and IoT security deployments. The integrated High-Speed USB PHY eliminates external transceivers, reducing BOM and PCB area for USB-equipped designs. The device supports 1.8 V, 2.5 V, and 3.3 V I/O domains, simplifying connection to mixed-voltage sensors, FPGAs, and external memory. A 16-channel Event System, 24-bit timers, and a Quad-SPI interface with XIP (execute-in-place) enable deterministic real-time response and easy expansion of code storage beyond the on-chip 1 MB Flash. Operating temperature spans -40 C to +105 C for industrial environments. Typical applications include industrial motor control (FOC and PFC), graphical HMI, audio DSP, automotive body and gateway ECUs, smart-energy metering, and connected IoT edge nodes with Ethernet or USB connectivity. The combination of 300 MHz Cortex-M7, FPU, and DSP extensions delivers DSP-class signal-processing throughput on a single MCU. When designing with this device, plan for an LQFP-100 footprint with a central thermal pad, route the 16-bit data bus and SDRAM signals with controlled impedance, and place decoupling capacitors within 2 mm of every supply pin. Refer to the SAME70 family datasheet for SDRAM timing and the recommended USB and Ethernet magnetics layout. This page synthesizes distributor pricing, drop-in SAME70 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ