DSPIC30F3011-30I/P
DSPIC30F3011-30I/P - 30 MIPS 16-bit DSC Motor Control | Microchip
The Microchip DSPIC30F3011-30I/P is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F motor-control family, integrating a high-performance DSP engine with a single-cycle 30 MIPS modified Harvard CPU in a 40-pin PDIP through-hole package. The device features 24 KB of on-chip Flash program memory, 1 KB of SRAM, and 1 KB of EEPROM, with a 30 MHz maximum operating frequency. The "30I" speed/temperature grade specifies 30 MIPS operation over the -40C to +85C industrial range, while "P" denotes the PDIP-40 package.
A Digital Signal Controller is a hybrid MCU-DSP architecture designed to combine deterministic microcontroller interrupt response with deterministic single-cycle MAC DSP math. Within the broader taxonomy, the DSPIC30F3011 sits at: DSC -> Digital Signal Controller -> 16-bit MCU -> Microcontroller -> Embedded Processing IC. dsPIC30F devices fill the gap between 8-bit PIC MCUs and full DSP processors, targeting real-time closed-loop control applications such as BLDC, PMSM, and AC induction motor drives where PID loops must execute every PWM cycle.
Key differentiating features include a 6-channel, 10-bit ADC capable of 1 Msps with simultaneous sampling, a 6-channel PWM module with complementary outputs and programmable dead time, a quadrature encoder interface (QEI), a 16-bit timer/counter, I2C, SPI, and UART communication peripherals, and 30 general-purpose I/O pins. The DSP engine adds a 17x17-bit single-cycle multiplier, 40-bit accumulators, and barrel shifter with dual-operand fetch, enabling real-time computation of Clark/Park transforms and field-oriented control (FOC) algorithms.
The DSPIC30F3011 architecture is built on a 5V CMOS process with 2.5-5.5V operating range, dual on-chip voltage regulators, and a flexible clock system that supports crystal, external clock, or internal RC oscillator modes. The motor-control PWM module features dedicated fault inputs and ADC triggering, allowing direct hardware synchronization between PWM edges and ADC conversions - critical for current-sense sampling at the correct PWM midpoint to avoid switching-noise contamination.
Typical applications include sensorless and sensored BLDC motor drives (HVAC fans, e-bikes, drones), PMSM field-oriented control for industrial servo drives, switched-mode power supplies with digital control loops, induction-motor variable-frequency drives, and automotive body electronics (fuel pumps, water pumps, HVAC blowers). It is also used in digital UPS systems, solar inverters, and CNC spindle controllers.
When designing with this device, allocate at least one PWM period for ADC conversion latency and ensure the ADC sample-and-hold capacitor is fully charged by the source impedance budget. The QEI module should be used with optical or magnetic encoders that provide complementary quadrature signals for direction discrimination and index pulse for homing.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers make informed procurement and second-source decisions for motor-control designs.
見積もり
お問い合わせ
