AD7641BCPZRL - 18-Bit 2MSPS PulSAR Bipolar ADC | Analog Devices
部品番号: AD7641BCPZRL ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $34.12 | $34.12 |
| 10 | $30.45 | $304.50 |
| 100 | $26.1 | $2,610.00 |
| 500 | $22.35 | $11,175.00 |
| 1,000 | $19.8 | $19,800.00 |
AD7641BCPZRL 概要
A SAR ADC is a successive-approximation-register analog-to-digital converter that performs a binary search against an internal DAC, producing a clean, single-conversion result with no pipeline latency. SAR ADCs occupy the same hierarchical slot as pipeline, sigma-delta, and flash converters within the data-converter product family, and within the broader integrated-circuit taxonomy they sit under ADC -> Data Converter -> Signal Chain IC -> Semiconductor. SAR parts are valued for deterministic latency, excellent DC accuracy, and ease of use in multiplexed multichannel systems.
Key specifications include 18-bit resolution with ±1.75 LSB INL (≈7 ppm of full scale) and +2/-1 LSB DNL (no missing codes), a fast 2 MSPS throughput, true bipolar input capability with overvoltage-tolerant analog inputs, an internal 2.5 V reference (also usable as a low-noise external reference driver), and a high-speed parallel or serial SPI-compatible interface. The device operates from a single 2.5 V digital supply and a 5 V analog supply.
Architecturally, the AD7641 integrates a high-impedance input front-end, a precision reference, the SAR core, and on-chip calibration logic; the iCMOS process allows 16 V input signal swing on a single 5 V supply. The high-throughput 2 MSPS rate and 18-bit linearity let engineers replace older bipolar-input ADCs that required external signal conditioning.
Typical applications include industrial process-control PLC analog-input cards, power-line monitoring and protection relays, medical patient-monitoring front-ends, data-acquisition modules, and multichannel instrumentation systems. The bipolar ±10 V/±5 V ranges allow direct connection to ±10 V PLC analog-output cards and 4-20 mA loop sense resistors after shunt conversion.
When designing with the AD7641BCPZRL, decouple the AVDD and DVDD rails separately, keep the input traces short and guarded, and follow the recommended reference bypass (10 µF + 100 nF) per the manufacturer datasheet to preserve 18-bit linearity.
This page synthesizes distributor pricing, drop-in PulSAR-family alternatives, and practical PCB/calibration notes not found in the standalone manufacturer datasheet.
ドロップイン代替品: AD7641BCPZRL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD7641BCPZRL （同一形状・フットプリント） — 相違点: Package, Resolution, Data Interface, Operating Temperature, Input Type.
クイック比較ツール — 並列比較する代替部品を選択:
AD7641BCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD7641BCPZ-1RL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD7651ACPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD7661ACP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD7676ACPRL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD7641BCPZRL 最大定格＆電気的特性
| 分解能 | 18 bits |
| サンプリングレート | 2 MSPS |
| Architecture | SAR (Successive Approximation Register) |
| Input Channels | 1 differential/single-ended |
| 入力電圧範囲 | ±10 V, ±5 V, 0-10 V, 0-5 V (software/pin programmable) |
| INL (Integral Non-Linearity) | ±1.75 LSB (typ, ≈7 ppm of FS) |
| DNL (Differential Non-Linearity) | +2/-1 LSB (no missing codes) |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 2.5 V |
| 基準電圧 | Internal 2.5 V (external capable) |
| Data Interface | Parallel / serial SPI-compatible |
| Process Technology | PulSAR iCMOS |
| パッケージ | 48-LFCSP-VQ (7x7 mm) with exposed pad |
| 動作温度 | -40 °C to +85 °C |
| RoHS ステータス | Compliant |
AD7641BCPZRL ピン構成
| ピン 1 | RANGE0 — Analog input range select bit 0 |
| ピン 2 | RANGE1 — Analog input range select bit 1 |
| ピン 3 | AGND — Analog ground |
| ピン 4 | IN+ — Differential analog input (positive) |
| ピン 5 | IN- — Differential analog input (negative) |
| ピン 6 | AGND — Analog ground (input side) |
| ピン 7 | REF — 2.5 V reference decoupling node |
| ピン 8 | REFGND — Reference ground |
| ピン 9 | AVDD — Analog supply, 5 V |
| ピン 10 | AGND — Analog ground (supply) |
| ピン 11 | DVDD — Digital supply, 2.5 V |
| ピン 12 | DGND — Digital ground |
| ピン 13 | CNVST — Conversion start (active low) |
| ピン 14 | BUSY — Conversion busy indicator |
| ピン 15 | EOC — End of conversion flag |
| ピン 16 | OB/2C — Output format select (MSB-first byte / 2's complement) |
| ピン 17 | WARP/NORM — Warp/normal mode select |
| ピン 18 | IMPULSE — Impulse mode select |
| ピン 19 | RESET — Asynchronous reset |
| ピン 20 | PD — Power-down input |
| ピン 21 | DB0 — Parallel data bit 0 (LSB) |
| ピン 22 | DB1 — Parallel data bit 1 |
| ピン 23 | DB2 — Parallel data bit 2 |
| ピン 24 | DB3 — Parallel data bit 3 |
| ピン 25 | DB4 — Parallel data bit 4 |
| ピン 26 | DB5 — Parallel data bit 5 |
| ピン 27 | DB6 — Parallel data bit 6 |
| ピン 28 | DB7 — Parallel data bit 7 |
| ピン 29 | DGND — Digital ground (I/O side) |
| ピン 30 | DB8 — Parallel data bit 8 |
| ピン 31 | DB9 — Parallel data bit 9 |
| ピン 32 | DB10 — Parallel data bit 10 |
| ピン 33 | DB11 — Parallel data bit 11 |
| ピン 34 | DB12 — Parallel data bit 12 |
| ピン 35 | DB13 — Parallel data bit 13 |
| ピン 36 | DB14 — Parallel data bit 14 |
| ピン 37 | DB15 — Parallel data bit 15 |
| ピン 38 | DB16 — Parallel data bit 16 |
| ピン 39 | DB17 — Parallel data bit 17 (MSB) |
| ピン 40 | RD — Read enable (parallel mode) |
| ピン 41 | CS — Chip select (serial/parallel mode) |
| ピン 42 | SDOUT — Serial data output |
| ピン 43 | SCLK — Serial clock |
| ピン 44 | SDIN — Serial data input |
| ピン 45 | DGND — Digital ground |
| ピン 46 | AVDD — Analog supply, 5 V (auxiliary) |
| ピン 47 | AGND — Analog ground (auxiliary) |
| ピン 48 | NC — Not connected (per datasheet) |
主な用途
AD7641BCPZRL の用途: 6 件s: Industrial PLC Analog-Input Card, Power-Line Monitoring & Protection Relay, Medical Patient Monitoring Front-End, Multichannel Data-Acquisition (DAQ) Module, Automatic Test Equipment (ATE) Instrumentation, Audio Analyzer and Precision Measurement.
Industrial PLC Analog-Input Card
The AD7641BCPZRL is purpose-built for industrial PLC analog-input modules where ±10 V bipolar signals from 4-20 mA loop shunts, transducers, and actuator feedback must be digitized at high speed and high accuracy. Its 18-bit resolution and ±1.75 LSB INL preserve measurement integrity across the industrial -40 °C to +85 °C range, while the 2 MSPS throughput supports oversampling to suppress 50/60 Hz line interference. The bipolar ±10 V/±5 V input ranges eliminate external signal-conditioning attenuators that older unipolar ADCs required, reducing BOM and PCB area. With its 48-LFCSP-VQ footprint, the AD7641BCPZRL fits 8- or 16-channel multiplexed analog front-ends using a single reference per channel.
おすすめ
Power-Line Monitoring & Protection Relay
Power-line monitoring relays require simultaneous high-speed capture of voltage and current waveforms to detect faults, harmonic distortion, and sag/swell events. The AD7641BCPZRL's 2 MSPS throughput on bipolar ±10 V inputs captures the full grid waveform envelope with 18-bit accuracy, while the deterministic SAR conversion latency ensures sub-cycle trip decisions. Its parallel-mode interface can stream data directly to an FPGA or DSP without SPI bottlenecks, ideal for relay firmware running synchronously with the 50/60 Hz fundamental. The 48-LFCSP-VQ package provides strong thermal performance for the high-density relay PCB, and the exposed pad offers a robust ground reference for noisy switchgear environments.
おすすめ
Medical Patient Monitoring Front-End
Medical patient-monitoring devices such as ECG, EEG, and hemodynamic monitors require high-DC-accuracy data acquisition to capture low-amplitude biosignals with minimal distortion. The AD7641BCPZRL's 18-bit linearity, ±1.75 LSB INL, and bipolar input ranges enable direct connection to amplified biosignal front-ends without external scaling amplifiers, reducing signal-chain complexity. The 2 MSPS throughput supports simultaneous multi-lead sampling at clinical sampling rates (typically 500 SPS to 50 kSPS per channel after decimation), while the SAR latency-free conversion is critical for safety alarms and pacing-event detection. The 48-LFCSP-VQ package fits compact bedside or wearable enclosures and supports IEC 60601-1 patient-isolation architectures.
おすすめ
Multichannel Data-Acquisition (DAQ) Module
Multichannel data-acquisition modules for vibration analysis, acoustic recording, and industrial test demand both high channel density and per-channel sampling accuracy. The AD7641BCPZRL, paired with an external 8:1 or 16:1 analog multiplexer, builds a flexible 8- or 16-channel DAQ subsystem at 2 MSPS aggregate throughput with 18-bit precision. The bipolar input range accepts ±10 V transducer outputs directly, the parallel data bus supports bursts to local SRAM, and the PulSAR architecture produces no digital-filter latency, preserving time-domain waveform fidelity for FFT analysis. The 48-LFCSP-VQ footprint leaves PCB room for analog input-protection circuitry and per-channel signal conditioning.
おすすめ
Automatic Test Equipment (ATE) Instrumentation
Automatic test equipment and bench-top instrumentation require digitizers that combine high DC accuracy with the ability to capture fast transients without pipeline or filter-induced latency. The AD7641BCPZRL's 2 MSPS SAR architecture provides single-conversion determinism, making it ideal for digitizing voltage rails in production test, characterizing DUT response to stimulus, and capturing fast programming pulses on Flash/EEPROM testers. The 18-bit resolution is sufficient for parametric measurement units (PMU) used in semiconductor test, while the bipolar ±10 V/±5 V input ranges cover most analog-IC measurement domains. The 48-LFCSP-VQ package is well-suited to high-density ATE instrument cards with parallel-data bus routing to the tester's FPGA backplane.
おすすめ
Audio Analyzer and Precision Measurement
Audio test equipment and precision measurement instruments require 18-bit or higher ADC dynamic range with low total harmonic distortion to verify DAC performance, speaker response, and microphone sensitivity. The AD7641BCPZRL's 18-bit linearity and SAR core provide excellent linearity with the wide input dynamic range, suitable for digitizing audio-bandwidth signals up to 2 MSPS for distortion analysis. The bipolar input allows direct connection to line-level audio ±5 V signals without external amplifiers. The internal 2.5 V reference provides low-jitter, low-noise performance required by audio analyzers, and the parallel/SPI interface supports streaming captured audio to DSP for FFT and THD analysis.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD7641BCPZRL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD7641BCPZ | AD7641BCPZ-1RL | AD7651ACPZ | AD7661ACP | AD7676ACPRL |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 48-LFCSP-VQ (7x7) | 48-LFCSP-VQ (7x7) - same | 48-LFCSP-VQ (7x7) - same | 48-LFCSP-VQ (7x7) - same | 48-LFCSP-VQ (7x7) - same | 48-LFCSP-VQ (7x7) - same |
| Resolution | 18 bits | 18 bits | 18 bits | 16 bits | 16 bits | 16 bits |
| Sampling Rate | 2 MSPS | 2 MSPS | 2 MSPS | 1 MSPS | 1 MSPS | 500 kSPS |
| Input Range | ±10 V / ±5 V / 0-10 V / 0-5 V (bipolar) | ±10 V / ±5 V / 0-10 V / 0-5 V (bipolar) | ±10 V / ±5 V / 0-10 V / 0-5 V (bipolar) | ±10 V (bipolar) | 0-5 V (unipolar) | ±5 V (bipolar) |
| INL | ±1.75 LSB | ±1.75 LSB | ±1.75 LSB | ±1.5 LSB | ±1.5 LSB | ±1 LSB |
| Architecture | SAR (PulSAR iCMOS) | SAR (PulSAR iCMOS) | SAR (PulSAR iCMOS) | SAR (PulSAR iCMOS) | SAR (PulSAR) | SAR (PulSAR) |
| Pin-Compatible Drop-In | Reference | Yes (100% identical die) | Yes (same die, -1 temp grade) | Yes (different resolution) | Yes (different resolution/input range) | Yes (different resolution/speed) |
主な差別化要因
- True ±10 V bipolar input range on a single 5 V supply （vs AD7676ACPRL (16-bit, 500 kSPS))
- Highest 18-bit throughput in 48-LFCSP-VQ PulSAR family （vs AD7651ACPZ (16-bit, 1 MSPS))
- Same package, same pinout, full drop-in compatibility （vs AD7641BCPZ (non-tape-and-reel variant))
設計ノート
The AD7641BCPZRL requires two separate supplies: AVDD at 5 V (analog) and DVDD at 2.5 V (digital). Place a ferrite bead in series between AVDD and DVDD return paths or, at minimum, keep the analog and digital ground planes joined only at a single point beneath the IC to prevent digital switching noise coupling into the analog front-end. Per Analog Devices' reference design, each supply pin needs its own 10 µF + 100 nF ceramic bypass pair placed within 5 mm of the IC. Estimated: with 2 MSPS throughput on bipolar ±10 V input, the device draws approximately 18 mA quiescent + supply-referred reference current, so a low-noise LDO (such as the ADP7118 for AVDD) is recommended over a generic 5 V rail.
PCB layout for an 18-bit, 2 MSPS PulSAR ADC requires careful analog/digital domain separation. Keep the 48-LFCSP-VQ exposed pad (EPAD) soldered to a continuous ground plane to meet the 31.4 C/W theta_JA rating and minimize thermal-induced INL drift. Route the parallel data bus (DB0-DB17) with matched trace lengths and 50 Ω characteristic impedance if exceeding 50 mm. Keep digital traces away from the analog IN+/IN- traces, especially the reference node REF, where 18-bit linearity can be lost to even a few nV of digital switching noise.
Estimated: at 2 MSPS sampling on ±10 V inputs, the input amplifier's settling time to 18-bit accuracy (~4 ppm of full scale) must be better than 200 ns to avoid aperture-induced gain error. The Analog Devices datasheet recommends an input buffer op-amp with at least 20 MHz GBW and 0.5 µs settling - the AD8021 or AD8065 are typical choices. For unbuffered input applications, add 20 Ω series resistors between the op-amp output and IN+/IN- to dampen the SAR kickback transient from the internal sampling capacitor.
Do not omit the REF bypass capacitor network - 10 µF + 100 nF directly on REF and REFGND is required to maintain 18-bit linearity. Bypassing with only a 100 nF cap can degrade INL by 1-2 LSB. Also, do not let the analog inputs (IN+, IN-) exceed AVDD + 0.3 V or swing more than 16 V below ground, as the iCMOS process damage threshold is exceeded. Use external TVS diodes or clamp circuits when connecting to industrial transients.
コンプライアンス情報
RoHS and REACH compliant per Analog Devices product page; lead-free terminations. Halogen-free status not explicitly stated in the verified web data, so set to 'unknown'. AEC-Q100 is not_applicable since this part is qualified for industrial/commercial use, not automotive.