MC908KX2CPE - 8-Bit HC08 MCU, 8MHz, 2KB Flash | NXP
部品番号: MC908KX2CPE ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.95 | $4.95 |
| 10 | $4.45 | $44.50 |
| 100 | $3.95 | $395.00 |
| 500 | $3.55 | $1,775.00 |
| 1,000 | $3.15 | $3,150.00 |
MC908KX2CPE 概要
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, executing one instruction on 8-bit data words at a time. Within the embedded systems hierarchy, an MCU sits below 16/32-bit processors in compute capability but above discrete logic, offering a complete, low-cost control solution. The HC08 (M68HC08) family from Motorola/Freescale, now maintained by NXP, is a CISC-architecture 8-bit line widely used in cost-sensitive control applications and still supported for legacy designs through authorized aftermarket channels such as Rochester Electronics.
Key features of the MC908KX2CPE include its 8 MHz internal bus operation, 2KB of in-system programmable Flash memory for field-updatable firmware, operation from either 3.3V or 5V supply rails, and an onboard SCI (Serial Communications Interface) for asynchronous UART communication. The 16-pin dual in-line package with through-hole terminals makes the device ideal for breadboarding, prototyping, and repair of legacy through-hole assemblies.
Technically, the HC08 core implements an enhanced M6805-derived CISC instruction set with indexed addressing modes, a low-power wait mode, and on-chip oscillator options. The KX2 subfamily represents the smallest memory configurations of the KX line, targeting simple control loops, timing supervision, and interface translation tasks where larger flash arrays are unnecessary.
Typical applications include small appliance control, industrial sensor signal conditioning nodes, LED and relay sequencing, battery charger supervision, and replacement MCUs in legacy industrial equipment repairs. The industrial temperature grade of the CPE suffix suits factory-floor environments.
Design consideration: as a mature product, new designs should evaluate current NXP MCUs, but for legacy maintenance the 5V-tolerant through-hole package simplifies drop-in servicing of existing boards.
This page synthesizes distributor stock data, pricing context, lifecycle information, and drop-in alternative analysis not consolidated in the manufacturer datasheet.
ドロップイン代替品: MC908KX2CPE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC908KX2CPE （同一形状・フットプリント） — 相違点: Core Processor, Package, Mounting Type, Program Memory Size, Packaging.
クイック比較ツール — 並列比較する代替部品を選択:
MC908KX2CP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC908KX2CDWE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.29 / 個
データシートを見る →MC908KX2CPE 最大定格＆電気的特性
| Core Processor | HC08 |
| Core Architecture | 8-Bit CISC |
| Core Size | 8-Bit |
| 最大クロック周波数 | 8 MHz |
| Program Memory Type | FLASH |
| Program Memory Size | 2KB (2K x 8) |
| 電源電圧 | 3.3 V / 5 V |
| Peripherals | SCI |
| ピン数 | 16 |
| パッケージ | 16-PDIP |
| 実装タイプ | Through-Hole |
| Temperature Grade | Industrial |
| Product Family | HC08 |
| Manufacturer Prefix | MC908 (NXP / Freescale Semiconductor) |
| RoHS ステータス | unknown |
MC908KX2CPE 16-pdip ピン配置ガイド
MC908KX2CPE (16-pdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC908KX2CPE.
詳細は データシート をご参照ください。
主な用途
MC908KX2CPE の用途: 6 件s: Small Appliance Control, Industrial Sensor Node, Legacy Equipment Repair and Servicing, Battery Charger Supervision, LED and Relay Sequencing, Educational and Prototyping Platforms.
Small Appliance Control
The MC908KX2CPE fits small appliance control boards because its 8 MHz HC08 core, 2KB Flash, and 16-pin PDIP through-hole package cover the exact needs of timer, key-scan, and relay-drive logic in coffee makers, fans, and washers. The dual 3.3V/5V supply range lets the same firmware image serve different power architectures, and the industrial temperature grade tolerates heat near heating elements. With the SCI interface unused or used for diagnostics, the part minimizes BOM cost while the in-system programmable Flash allows last-minute feature updates without changing sockets or masks.
おすすめ
Industrial Sensor Node
In industrial sensor nodes, the MC908KX2CPE pairs its 8-bit HC08 core and 2KB Flash with the SCI interface to condition analog sensor inputs and stream scaled readings over an RS-485/RS-232 link. The industrial temperature grade is essential near machinery, and the 16-PDIP through-hole package survives vibration better than fine-pitch SMD parts while remaining hand-replaceable during line service. Because the flash is in-system programmable, calibration constants and communication parameters can be updated on the production floor without desoldering, cutting maintenance cost in distributed monitoring installations.
おすすめ
Legacy Equipment Repair and Servicing
For repair of legacy HC08-based industrial equipment, the MC908KX2CPE is often the correct replacement because it preserves the original 16-pin PDIP footprint, HC08 instruction set, and 5V signaling of boards designed in the 1990s and 2000s. Through-hole sockets allow quick swaps without hot-air rework, and availability through Rochester Electronics plus independents (5000+ pieces reported across distributors) secures continuity. Firmware can be re-flashed in-system via the SCI-based monitor mode, so repaired boards return to service with identical behavior - something no cross-brand modern MCU can achieve without redesign.
おすすめ
Battery Charger Supervision
Battery charger supervisors benefit from the MC908KX2CPE's 3.3V/5V operation, 2KB Flash for charge-termination state machines, and timer peripherals for trickle/fast-charge sequencing. The 8 MHz HC08 core easily handles ADC polling, LED status indication, and SCI reporting of charge state to a host. Through-hole 16-PDIP mounting simplifies prototype bring-up and small-batch builds of custom chargers, while the industrial grade supports charging stations in unconditioned spaces such as garages and workshops. Flash programmability lets engineers tune termination thresholds after field trials without hardware changes.
おすすめ
LED and Relay Sequencing
Sequencing applications - indicator-light chasers, relay staging, and timing supervision - exploit the MC908KX2CPE's low overhead: the 8 MHz HC08 CISC core executes bit-manipulation instructions efficiently, and 2KB Flash holds generous sequence tables. The 16-pin PDIP provides enough general-purpose port pins for a handful of outputs plus clock and reset, and the 5V rail drives small relays through transistors directly. Industrial temperature rating and through-hole durability make the part reliable in control cabinets, while SCI allows remote sequence reconfiguration where deployed equipment is hard to access.
おすすめ
Educational and Prototyping Platforms
Universities and hobbyists use the MC908KX2CPE for teaching 8-bit embedded fundamentals because the 16-PDIP through-hole package inserts directly into breadboards, the HC08 CISC instruction set is compact and readable in assembly, and 2KB Flash is large enough for meaningful exercises yet small enough to teach memory discipline. Operation at 3.3V or 5V matches both modern and legacy lab benchtop supplies, and the SCI port connects to a PC terminal for UART experiments. Free HC08 assemblers and low-cost MON08 programming hardware keep the complete toolchain accessible to students.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC908KX2CPE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC908KX2CP | MC908KX2CDWE |
|---|---|---|---|
| Package | 16-PDIP | 16-PDIP - same | SOIC-16 (surface mount) |
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) |
| Core | HC08 8-bit CISC | HC08 8-bit CISC | HC08 8-bit CISC |
| Max Clock Frequency | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 2KB (2K x 8) | 2KB (2K x 8) | 2KB (2K x 8) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
| Temperature Grade | Industrial | Commercial | Industrial (E suffix) |
| Serial Interface | SCI | SCI | SCI |
主な差別化要因
- Industrial temperature grade in through-hole PDIP （vs MC908KX2CP)
- SMT migration path on the same die （vs MC908KX2CDWE)
- Honest limitation: no cross-brand drop-in exists （vs PIC16F / AT89 8-bit MCUs)
設計ノート
The MC908KX2CPE is a legacy HC08 part sourced mainly through Rochester Electronics and independent distributors. Before committing to a production run, confirm stock depth and lot date codes: spot-market parts may have mixed date codes or re-marked units. Purchase only from authorized aftermarket channels where traceability matters, and consider a lifetime-buy for long-term service programs supporting installed HC08-based equipment.
The device supports 3.3V and 5V operation, but verify the bus-frequency-versus-voltage operating envelope in the manufacturer datasheet before running 8 MHz at reduced supply. On 5V rails, add 0.1uF ceramic decoupling directly across VDD/VSS at the 16-PDIP socket, and keep reset lines properly pulled up per HC08 family requirements to guarantee clean power-on reset through the monitor-mode entry window.
For through-hole 16-PDIP designs, use a socketed layout for field serviceability in repair scenarios - the primary ongoing use case for this MCU. Keep the SCI (TX/RX) traces short and, for RS-232 links, place the level translator close to the MCU. If migrating to the SOIC-16 MC908KX2CDWE, the surface-mount variant shares pin functions, allowing a common schematic with alternate footprints for dual sourcing of through-hole and SMD builds.
コンプライアンス情報
Compliance data was not present in the retrieved distributor listings. As a legacy PDIP device, older date codes may not be RoHS compliant - verify with the supplier before ordering for RoHS-restricted markets.
