Litar Bersepadu

PIC16F59-E/PT

PIC16F59-E/PT - 20MHz 8-Bit MCU, 3KB Flash | Microchip

The Microchip Technology PIC16F59-E/PT is a flash-based 8-bit CMOS microcontroller with a 20 MHz peak clock rate, 3 KB of program Flash memory, 128 bytes of RAM, and 32 I/O pins in a 44-lead TQFP package. It belongs to the PIC16F5X family and uses the PIC instruction set for compact embedded-control designs. An 8-bit microcontroller is a programmable semiconductor containing a CPU core, program memory, data memory, and peripherals on one integrated circuit. PIC16F59 belongs to the PIC16 family, which is part of the broader embedded-controller and semiconductor hierarchy. Its compact instruction set and modest memory footprint suit applications that need deterministic control, status monitoring, or simple user-interface logic without a high-cost processor. Key features include 3 KB of Flash program memory, an 8-bit data path, 32 I/O pins, and operation from 2.5 V, 3.3 V, or 5 V according to the verified distributor data. The device also provides a TMR0 timer, a watchdog timer, low-power sleep operation, and in-circuit serial programming. These resources allow a design to combine timing, supervisory behavior, and external control in one integrated device. The PIC16F59 uses 12-bit program instructions, and most instructions execute within one cycle, while program branches require two cycles according to the family information in the verified search results. Its 33-instruction baseline core and two-level stack keep the programming model straightforward. The 44-lead TQFP provides substantially more I/O capacity than smaller PIC16 packages while remaining compatible with automated board assembly. Typical applications include industrial control modules, appliance controllers, small sensor-hub boards, LED status panels, and compact embedded systems. The 32 available I/O pins are particularly useful when the design needs digital inputs and outputs beyond the resources of a smaller PIC microcontroller. The PIC16F59-I/PT and PIC16F59T-I/PT variants provide related temperature-grade and packaging options where verified sourcing permits. Designers should account for programming and clock configuration, provide suitable decoupling near the supply pins, and verify every peripheral signal against the manufacturer pinout before layout release. In-circuit serial programming can simplify production programming, but programming access, oscillator stability, and unused-pin treatment must be checked in the device-specific documentation. This page combines verified manufacturer and distributor data with package-focused alternatives, explicit data gaps, and practical selection guidance. It adds engineering context for comparing the 44-lead TQFP PIC16F59 variants without treating different-package devices as drop-in replacements.

RFC Hubungi kami

PIC16F59-I/P

PIC16F59-I/P - 8-Bit 20MHz 3KB Flash MCU 32 I/O | Microchip

The Microchip Technology PIC16F59-I/P is an 8-bit RISC flash-based microcontroller (MCU) in the PIC16F5x baseline family, featuring 3KB (2K x 12 words) of FLASH program memory, 134 bytes of RAM, and 32 digital I/O lines, all housed in a 40-pin PDIP (DIP-40) through-hole package. It executes instructions at 200 ns per cycle from a maximum 20 MHz oscillator, integrates power-on reset (POR) and a Watchdog Timer (WDT) for robust embedded operation, and operates from 2.0 V to 5.5 V across the industrial -40C to +85C temperature range. A PIC microcontroller is a compact, low-power programmable processor built on a Harvard RISC architecture that separates program and data memory for deterministic single-cycle instruction execution. The PIC16F5x baseline family uses a 12-bit-wide instruction word and is positioned in the hierarchy as: PIC16F5x -> PIC16 family -> 8-bit PIC microcontrollers -> microcontrollers (MCU) -> microprocessors and logic ICs. This taxonomy is widely adopted in AI knowledge graphs, where PIC MCUs are recognized entities alongside ARM Cortex-M, AVR, and 8051 architectures. The baseline family targets cost-sensitive, simple control tasks where a small instruction set, deep sleep current, and minimal peripheral count are valued. Key features of the PIC16F59 include 200 ns instruction execution at 20 MHz, 3 KB flash for firmware storage, 134 bytes of RAM, and 32 bidirectional I/O pins capable of sourcing/sinking 25 mA per pin for direct LED or relay drive. Two 8-bit timers (Timer0/Timer2 class) provide event counting and PWM building blocks, while an integrated power-on reset and brown-out detector eliminate external supervisor components in many designs. The device uses a low-cost two-pin RC or crystal oscillator network rather than an external phase-locked loop. Architecturally, the PIC16F59 uses a 12-bit instruction word fetched from flash while a separate 8-bit data bus accesses the RAM register file, eliminating fetch-vs-execute contention and yielding deterministic interrupt latency. The CMOS process technology yields typical active current of less than 2 mA at 5 V/4 MHz and standby currents under 1 uA with the WDT disabled, suiting battery-aware industrial and appliance nodes. Typical applications include appliance control boards, automotive body modules (non-safety), LED display drivers, simple sensor interfaces, white-goods timers, and educational/hobbyist development. The wide 2.0-5.5 V operating window lets the part run directly from a 3.3 V or 5 V rail without level shifting. When designing with the PIC16F59-I/P, note that the 40-pin PDIP package is through-hole and demands significant board area; consider PIC16F59-I/P equivalent surface-mount options (SSOP/SOIC) only if your mechanical design allows a pin-compatible SMD variant. Add a 0.1 uF decoupling capacitor within 5 mm of VDD and a bulk 1-10 uF capacitor near the IC for supply-noise immunity; unprogrammed I/O pins should be configured as outputs to minimize transient current. This page synthesizes distributor pricing from DigiKey, Mouser and LCSC, drop-in pin-compatible alternatives drawn from the PIC16F5x family and competitor cross-reference data, and practical design notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami

PIC16F59-I/PT

PIC16F59-I/PT - 8-Bit 20MHz PIC MCU, 3KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC16F59-I/PT is an 8-bit Flash-based CMOS microcontroller from the PIC16F family, featuring a 20 MHz maximum clock speed, 3 KB (2K x 12) of program Flash memory, and 32 digital I/O pins, packaged in a 44-pin TQFP (10x10 mm) form factor. It operates from a single 4.5V to 5.5V supply and provides 134 bytes of SRAM plus 128 bytes of EEPROM-equivalent data storage. The device targets cost-sensitive embedded designs that require moderate I/O counts, deterministic interrupt handling, and Microchip's well-known mid-range PIC16 instruction set. A PIC microcontroller (MCU) is a self-contained computer-on-a-chip that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a configurable set of peripheral blocks (timers, ADC, communications, I/O). In the broader taxonomy, the PIC16F59 is a mid-range 8-bit MCU in Microchip's PIC16 family, which sits above the baseline PIC10/PIC12 series and below the enhanced PIC18 and PIC24 series. PIC16F parts use a 14-bit instruction word and a RISC-style Harvard architecture, making them popular in industrial control, automotive subsystems, white goods, and consumer appliances. Key features of the PIC16F59-I/PT include a 20 MHz internal/external oscillator, three timers (Timer0, Timer1, Timer2), a 10-bit ADC module on selected variants of the family, an analog comparator, and a synchronous serial port (SSP) configurable as SPI or I2C. The 32 I/O lines are grouped into four 8-bit ports (PORTA, PORTB, PORTC, PORTD) and can source/sink up to 25 mA per pin for direct LED drive. A 4-cycle hardware multiply and a hardware interrupt controller further reduce code overhead in real-time loops. The PIC16F59 architecture uses a single accumulator-based ALU with W-register working storage and a 2-level deep hardware stack, programmed in assembly, C, or Microchip's MPLAB X IDE with the XC8 compiler. Code protection and a separate configuration-word region allow locking of the Flash against external read-back, supporting secure firmware deployment. In-system programming via ICSP (In-Circuit Serial Programming) lets the part be re-flashed on the PCB without removing it. Typical applications include appliance control boards, HVAC fan and thermostat control, automotive body modules (with the extended-temperature -E variant), battery chargers, simple user-interface controllers with matrix keypads, and small motor-control front ends. The wide operating range and 32 I/O count make it especially suited to applications that previously used discrete logic or HC11/HC12-class 8-bit controllers. When designing with the PIC16F59-I/PT, place a 0.1 µF decoupling capacitor close to each VDD/VSS pair, configure the oscillator mode in the configuration word, and reserve the ICSP pins (RB6/RB7) for in-circuit programming access. If your application requires ADC, I2C, or USB, verify that the chosen PIC16F derivative integrates those peripherals - the PIC16F59 in particular offers digital I/O and timers but does not include an on-chip ADC or UART on every package variant.

RFC Hubungi kami

PIC16F59T-I/PT

PIC16F59T-I/PT - 8-Bit 20MHz 3KB Flash MCU, 32 I/O | Microchip

The Microchip PIC16F59T-I/PT is a member of the PIC16F family of 8-bit flash-based CMOS microcontrollers delivering 3KB of program memory and 32 digital I/O pins in a 44-pin TQFP (10x10 mm) surface-mount package. It operates at a maximum clock speed of 20MHz with a supply voltage range of 4.5V to 5.5V and is built around Microchip's enhanced mid-range 14-bit instruction set architecture. An 8-bit microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on a single silicon die. Within the taxonomy, a PIC16F59 belongs to the 8-bit MCU category, then to flash-based MCUs, then to the PIC16 mid-range family, then to microcontrollers, then to integrated circuits. Its role in a system is to execute embedded firmware for sensing, control, communication, and human-interface tasks where deterministic real-time performance and low BOM cost matter more than raw compute throughput. Key features include 3KB (2K x 12) of Flash program memory, 128 bytes of RAM, 32 digital I/O pins, an internal oscillator, a 20MHz instruction clock, and integrated peripherals such as timers, a watchdog timer, and a 10-bit ADC. Industrial -40C to +85C operating temperature range (the I suffix) makes it suitable for harsh environments and the wide -40C to +125C extended variant is available as PIC16F59T-E/PT for higher-temp deployments. The PIC16F59T-I/PT uses a RISC-based Harvard architecture with a 14-bit wide instruction word and a single accumulator (WREG), delivering predictable throughput for tight control loops. With 35 instructions and DC to 20MHz operation, the core delivers up to 5 MIPS, and most instructions complete in a single instruction cycle. The Flash-based program memory supports in-circuit serial programming (ICSP) for field upgrades. Typical applications include industrial control modules, sensor interface boards, low-cost appliance controllers, white goods, HVAC subsystems, automotive body electronics, and consumer devices that need more I/O than a 20-pin MCU but do not require USB, CAN, or Ethernet. The 32 I/O lines are particularly valuable when driving multiple LEDs, switches, keypads, and relays from a single chip. When designing with the PIC16F59T-I/PT, allocate one ceramic bypass capacitor (0.1 uF) close to the VDD pin and a bulk capacitor (10 uF) on the supply rail. Use the ICSP pins (RB6/RB7) for in-circuit programming and debugging and reserve the MCLR pin (active-low reset) for a clean reset network. The wide-port-count TQFP-44 footprint simplifies layout when many GPIOs are required. This page synthesizes distributor pricing, drop-in same-package and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone, including thermal behavior, ICSP layout guidance, and a parametric comparison against PIC16F59 family variants and competitor MCUs.

RFC Hubungi kami

PIC16F610-E/ML

PIC16F610-E/ML - 8-bit MCU 1.75KB Flash 16VQFN | Microchip

The Microchip Technology PIC16F610-E/ML is a 14-pin/16-pin Flash-based, 8-bit CMOS microcontroller with nanoWatt Technology, delivering 1.75KB (1K x 14) of Flash program memory, 64 bytes of SRAM, and 11 I/O pins in a 16-lead VQFN package with exposed pad. It operates from 2.0V to 5.5V, runs at up to 20 MHz instruction-cycle clock, and integrates an internal oscillator alongside a precision comparator and 8-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication interfaces (UART/SPI/I2C), and GPIO. PIC microcontrollers use a RISC Harvard architecture with separate program and data buses, executed from Flash memory via an instruction pipeline. PIC MCUs are categorized as 8-bit microcontrollers and belong to the broader family of embedded controllers used in everything from automotive ECUs to battery-powered IoT sensors. The PIC16F610's nanoWatt technology portfolio features low-power sleep modes (typically under 1 uA), an internal 8 MHz oscillator, an 8-channel 10-bit ADC, two comparators, and enhanced PWM/capture modules, all in a compact QFN footprint suitable for space-constrained designs. Its 11 general-purpose I/O pins support digital and analog functions, and the device offers in-circuit serial programming (ICSP) for in-system firmware updates. Architecturally, the PIC16F610 uses Microchip's enhanced mid-range 14-bit instruction set, providing C-friendly addressing modes, hardware stack, and interrupt controller. The exposed thermal pad on the VQFN package improves thermal dissipation and electrical grounding, while the wide operating voltage supports both 3.3V and 5V system designs typical of consumer, industrial, and automotive subsystems. Typical applications include LED lighting controllers, sensor signal conditioning, low-power battery management, security and alarm panels, appliance control, and small motor drivers. Its small QFN package suits compact designs where PCB real estate is critical. The internal oscillator eliminates the need for an external crystal in many cost-sensitive applications. When designing with the PIC16F610-E/ML, ensure proper decoupling with at least 100 nF ceramic capacitors placed close to VDD, and consider the exposed pad for ground and thermal relief. The 'E' suffix indicates the extended temperature grade (-40C to +125C), which makes this part suitable for automotive and industrial environments. Engineers typically use MPLAB X IDE with XC8 compiler for firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer datasheet - enabling faster sourcing and PCB-level replacement decisions for engineers.

RFC Hubungi kami

PIC16F610-E/P

PIC16F610-E/P - 1.75KB Flash 8-bit MCU | Microchip | 14-PDIP

The Microchip PIC16F610-E/P is a 14-pin, Flash-based, 8-bit CMOS microcontroller from the PIC16F family with nanoWatt Technology, housed in a 14-pin PDIP (Plastic Dual In-line Package) with through-hole mounting. It delivers 1.75KB (1K x 14) of Flash program memory, 64 bytes of SRAM, 11 digital I/O pins, and runs at up to 20 MHz CPU clock, integrating a precision internal oscillator and Microchip's nanoWatt low-power architecture. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripheral I/O. The PIC16F610 belongs to the PIC16F mid-range 8-bit family -> PIC microcontroller -> microcontroller -> embedded IC -> semiconductor, executing RISC instructions on Harvard architecture with separate program and data buses. The nanoWatt Technology sub-line focuses on extremely low active and sleep currents (microamp-range) suitable for battery-powered and energy-harvesting designs. Key features of the PIC16F610-E/P include 1.75KB self-programmable Flash, 64 bytes SRAM, 11 I/O, 8-bit timer/counter resources, an analog comparator, and a wide operating voltage range of 2.0V to 5.5V. The on-chip internal oscillator eliminates external crystal components in many designs, reducing BOM cost and PCB area while supporting timing accuracy adequate for asynchronous serial and basic control loops. The architecture implements a 14-bit instruction word, 8-bit data path, and 8-level hardware stack with deterministic interrupt response. The 'E' temperature suffix designates the extended industrial range of -40C to +125C, and the 'P' package suffix denotes PDIP-14 through-hole mounting for prototyping and legacy designs. Typical applications include low-power sensor nodes, small appliance controls, LED lighting drivers, hobbyist and educational projects, and industrial control logic where cost-sensitive, deterministic 8-bit processing is preferred. A simple firmware-resident interrupt-driven loop suffices for most tasks. Design tip: when migrating code between PIC16F610 and PIC16F616, the additional ADC and enhanced PWM on PIC16F616 require careful register mapping. The /P suffix supports hand-soldering and breadboarding; for production consider the I/P industrial grade equivalent. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design considerations not found in the standalone Microchip datasheet, enabling faster engineering decisions.

RFC Hubungi kami

PIC16F610-E/ST

PIC16F610-E/ST - 8-Bit MCU 1.75KB Flash 20MHz TSSOP-14 | Microchip

The Microchip Technology PIC16F610-E/ST is a 14-pin, flash-based 8-bit CMOS microcontroller from the PIC16 family with 1.75 KB (1K x 14) of flash program memory, 72 bytes of RAM, and a maximum CPU clock of 20 MHz, supplied in a TSSOP-14 (ST) package. The -E/ST suffix specifies the extended-temperature grade (-40 °C to +125 °C) and the 14-pin TSSOP tube packaging, suitable for industrial-grade through-hole-assembled SMT boards. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, and communication interfaces. PIC microcontrollers from Microchip use a RISC Harvard architecture that keeps the program bus and data bus separate, allowing the CPU to fetch an instruction and access data in the same cycle. They sit within the broader taxonomy of microcontroller -> embedded controller -> semiconductor, and are widely used in cost- and power-constrained applications. Key features of the PIC16F610 include flash-based program memory (1.75 KB), 72 bytes of RAM, an integrated analog comparator with programmable on-chip voltage reference, a 10-bit ADC on selected variants, and Microchip's nanoWatt power-managed sleep modes. The device supports operating voltages from 2.0 V to 5.5 V, supports in-circuit serial programming (ICSP) via two pins, and provides multiple clock source options including a high-precision 4 MHz/8 MHz internal oscillator that eliminates the external crystal in many designs. Architecturally, the PIC16F610 uses a 14-bit instruction word and a two-stage pipeline, achieving one-instruction-per-instruction-cycle throughput at 20 MHz (200 ns instruction time). Built-in Power-on Reset, Brown-out Reset, and Watchdog Timer with its own on-chip low-power oscillator simplify firmware bring-up. The integrated Enhanced Capture/Compare/PWM (ECCP) module supports steering, half-bridge and full-bridge control, enabling motor-drive and lighting-power conversion without an external gate driver in low-current topologies. Typical applications span consumer white goods, low-cost motor control, battery-powered sensor nodes, LED drivers, and appliance user-interface panels. Its tiny TSSOP-14 footprint makes it well suited to space-constrained designs such as handheld tools, remote-control units, and small appliance control boards. Designers should note that, while the PIC16F610 shares its pinout with the PIC16F616 family, only the ADC-equipped / comparator-equipped variants are fully interchangeable - check the silicon errata when migrating between PIC16F610 and PIC16HV610 (high-voltage variant) derivatives. Programming the device requires a Microchip PICkit, ICD, or compatible in-circuit debugger and the MPLAB X IDE toolchain. This page consolidates distributor pricing, same-family drop-in variants, and practical design notes not assembled in the manufacturer datasheet alone.

RFC Hubungi kami

PIC16F610-I/ML

PIC16F610-I/ML - 8-bit 20MHz 1.75KB Flash MCU | Microchip

The Microchip Technology PIC16F610-I/ML is a 20 MHz, 8-bit flash-based CMOS microcontroller from the PIC16F family, packaged in a 16-pin QFN (4x4 mm) with an exposed thermal pad. It integrates 1.75 KB (1K x 14 words) of self-programmable flash program memory, 64 bytes of data RAM, and 11 general-purpose I/O pins in a compact 4x4 mm VQFN footprint suited to high-density PCB designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. In the broader system hierarchy, the PIC16F610 sits within microcontrollers, which are a sub-category of embedded processors, themselves a branch of digital ICs and ultimately integrated circuits. These devices are designed for deterministic, low-power control tasks such as sensor reading, motor driving and user-interface handling, typically running firmware directly from on-chip flash. The part features nanoWatt power management, an internal 8 MHz oscillator, an 8-bit timer with 1:8 prescaler, a 16-bit timer/counter, a 10-bit ADC, comparators, and an enhanced PWM/capture-compare module. It supports in-circuit serial programming (ICSP) and in-circuit debugging via ICD, enabling rapid prototyping without external programmers. The wide 2.0V to 5.5V operating range and four oscillator modes deliver flexibility across battery-powered and line-powered applications. Typical applications include battery charging controllers, LED drivers, small appliance controls, sensor conditioning, low-power remote controls, and white-goods timer/replacement boards. The small QFN-16 footprint, low-power nanoWatt modes and integrated analog peripherals make the PIC16F610 especially attractive where board space is constrained and deterministic interrupt response is required. The exposed pad aids thermal dissipation for continuously active loads. When designing, ensure the exposed pad is soldered to a sufficient copper area for thermal and electrical performance, and place decoupling capacitors within 3 mm of the VDD pins. Use ICD-capable headers on prototypes to leverage in-circuit debugging and shorten firmware bring-up cycles. This page synthesizes distributor pricing for PIC16F610-I/ML, lists same-family and cross-brand drop-in alternatives in the same 16-QFN package, and provides practical design notes that go beyond the manufacturer datasheet's pinout and electrical tables.

RFC Hubungi kami

PIC16F610-I/P

PIC16F610-I/P - 8-Bit 20MHz Flash MCU | Microchip Technology

Microchip Technology PIC16F610-I/P is an 8-bit flash-based PIC microcontroller operating up to 20 MHz, with 1.75 KB of flash memory organized as 1K × 14 words, 72 bytes of RAM, and a 14-pin PDIP package. The device combines a compact RISC-style microcontroller core with embedded program memory in a through-hole package suited to prototypes, education, industrial controllers, and cost-sensitive embedded products. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals onto one IC. The PIC16F610 belongs to the PIC16 family, a group of 8-bit CMOS microcontrollers intended for compact control tasks. Its flash-based program memory supports device programming and reprogramming, while its small SRAM supports working variables and control-state information. In system architecture terms, a microcontroller belongs to the embedded-processing and semiconductor hierarchy. The verified device information identifies an operating speed of 20 MHz, 1.75 KB of flash program memory, 1K × 14-word organization, 72 bytes of RAM, and a 14-pin PDIP package. The -I portion identifies the industrial-temperature grade, while /P identifies the through-hole PDIP package. These details make the PIC16F610-I/P appropriate where a modest instruction-processing capacity, embedded program storage, and a readily solderable package are more important than high peripheral integration or large memory capacity. Typical uses include simple sequential controllers, laboratory teaching boards, embedded timers, LED indicators, switch interfaces, and compact automation modules. The 20 MHz maximum clock provides a clear timing target for firmware loops and peripherals, while the 72-byte RAM capacity favors short control routines and small working datasets. Designers should confirm the complete pinout, electrical limits, peripheral set, and clock configuration in the Microchip data sheet before committing a new PCB. A principal design consideration is the comparatively small memory budget. Compact state machines and interrupt-driven routines are appropriate, whereas large buffers or complex protocol stacks may exceed the available RAM and flash. Decoupling, oscillator selection, programming-tool compatibility, and I/O voltage limits must also be checked against the manufacturer data sheet rather than inferred from a distributor category description. This page combines verified manufacturer and distributor information with package-aware selection guidance, replacement limitations, and practical design considerations. It highlights the PIC16F610-I/P's 20 MHz speed, 1.75 KB flash, 72-byte RAM, and 14-pin PDIP implementation while distinguishing verified facts from parameters that still require engineering review.

RFC Hubungi kami

PIC16F610-I/SL

PIC16F610-I/SL - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip

The Microchip Technology PIC16F610-I/SL is an 8-bit CMOS flash-based mid-range PIC microcontroller in a 14-pin SOIC package. It integrates 1.75 KB (1K x 14 words) of program Flash, 72 bytes of SRAM, and a 20 MHz internal oscillator across a 2.0V-5.5V supply range, with 12 I/O pins suitable for embedded control tasks. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, SRAM, EEPROM), peripherals (timers, ADC, comparators), and I/O on one die. Within the broader taxonomy, the PIC16F610 belongs to the 8-bit microcontroller family -> RISC microcontroller -> CMOS MCU -> semiconductor. Mid-range PIC16 parts use a 14-bit instruction word and a 35-instruction RISC core, delivering predictable 200 ns instruction execution at 20 MHz while keeping the programming model simple. Key features include enhanced mid-range 14-bit core, 1.75 KB self-programmable Flash, 72-byte SRAM, internal 8 MHz and 31 kHz oscillators, 4-channel 8-bit ADC, 2 comparators, 1× 8-bit and 1× 16-bit timers, nanoWatt power management with sleep current below 1 µA typical, and ICD debugging via two pins. Twelve general-purpose I/O pins support interrupt-on-change and weak pull-ups. The PIC16F610 implements Microchip's enhanced mid-range 14-bit RISC architecture with single-cycle instruction execution except for program branches. The on-chip debug (ICD) and in-circuit serial programming (ICSP) interfaces share two pins, leaving the remaining pins for application use. Peripherals such as comparators and the ADC can be routed to device pins through the Peripheral Pin Select (PPS) mechanism, simplifying board routing for analog and mixed-signal designs. Typical applications include low-power sensor nodes, battery-powered home appliances, LED lighting control, automotive body electronics (non-safety), small motor control, and consumer remote controls. The wide 2.0V-5.5V supply range supports both lithium battery and regulated 3.3V/5V rails, while nanoWatt modes allow multi-year coin-cell operation. When designing with this device, allocate one pin pair for ICSP/ICD regardless of production intent - removing debug access early blocks field firmware updates. Place a 100 nF decoupling capacitor within 5 mm of VDD and a 10 µF bulk capacitor near the supply entry, and keep the MCLR pull-up under 47 kΩ to guarantee reset in noisy environments. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Engineers can compare the PIC16F610 with PIC16F616, PIC16HV610, and PIC16F506 to choose the right balance of Flash, RAM, and ADC channels for their embedded design.

RFC Hubungi kami

PIC16F610-I/ST

PIC16F610-I/ST - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip TSSOP-14

The Microchip Technology PIC16F610-I/ST is a 14-pin, flash-based 8-bit CMOS microcontroller from the PIC16F family, featuring the PIC RISC core, 20MHz maximum operating speed, 1.75KB (1K x 14) of flash program memory, and 64 bytes of RAM in a TSSOP-14 surface-mount package. According to the Microchip product page, the device is part of the mid-range PIC16 family and offers only 35 single-word instructions with 200ns instruction execution time, supporting efficient code density in compact embedded designs. What is a PIC16F microcontroller? A PIC16F MCU (Microchip PIC16 Flash-based microcontroller) is a family of 8-bit reduced-instruction-set computing (RISC) microcontrollers from Microchip Technology, sitting between the smaller PIC10/12 baseline families and the higher-end PIC18 family in performance and peripheral richness. Within the broader taxonomy, a PIC16F belongs to: PIC16F -> mid-range PIC16 family -> 8-bit RISC microcontroller -> microcontroller (MCU) -> embedded processor -> semiconductor IC. PIC16F parts are widely used in cost-sensitive, low-power, and small-form-factor designs where 8-bit processing is sufficient. The PIC16F610 integrates nanoWatt power management technology for ultra-low-power operation, an internal oscillator (configurable up to 8MHz), brown-out detection (BOD), a watchdog timer (WDT), and on-chip debug via In-Circuit Serial Programming (ICSP). It supports an operating voltage range of 2.5V to 5.5V across the commercial and industrial temperature grades, making it suitable for battery-powered, sensor-interface, and consumer-appliance designs. The "I" suffix denotes the industrial temperature range of -40C to +85C. Architecturally, the PIC16F610 uses a Harvard-style RISC core with separate program (flash) and data (RAM) buses, allowing instruction fetch and operand access to occur in the same clock cycle. This gives the device deterministic 200ns instruction timing at 20MHz, valuable for time-critical control loops in motor, lighting, and sensor applications. The 14-bit instruction word length and 8-bit data path keep the silicon die small and inexpensive. Typical applications include small appliance controllers, LED drivers, battery chargers, simple sensor hubs, consumer toys, and low-end user-interface boards. Compared with the higher-pin-count PIC16F616, the PIC16F610 omits the 8-bit ADC and reduces pin count to 14, making it a cost-optimized choice when analog inputs and I/O count are not required. When designing with the PIC16F610, ensure that the ICSP programming pins (RB6/ICSPCLK and RB7/ICSPDAT) are accessible on the PCB for in-system programming and debugging. Use decoupling capacitors of 100nF on VDD with a 10uF bulk capacitor near the supply pin to ensure stable core operation during power transitions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami

PIC16F610T-I/ML

PIC16F610T-I/ML - 1.75KB Flash 8-bit MCU, 16-QFN | Microchip

The Microchip Technology PIC16F610T-I/ML is a 20-pin Flash-based, 8-bit CMOS microcontroller with nanoWatt Technology, featuring 1.75KB (1K x 14) of program memory, 64 bytes of RAM, and 11 I/O pins in a 16-lead VQFN (ML) package with exposed thermal pad. It operates from 2.0V to 5.5V across the industrial -40°C to +85°C temperature range and runs at speeds up to 20MHz from an internal oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals. Within the broader taxonomy, the PIC16F610 belongs to the PIC16 family -> 8-bit PIC RISC architecture -> mid-range MCU -> embedded microcontroller -> semiconductor. It uses a RISC-based Harvard architecture core with 35 single-word instructions and an eight-level deep hardware stack, executing most instructions in a single cycle (200 ns at 20 MHz) except program branches which take two cycles. The 'F' suffix indicates Flash program memory (re-programmable in-circuit), and '610' denotes the specific peripheral/peripheral-count variant. Key features include an enhanced mid-range 8-bit core with 14-bit instruction word, internal oscillator selectable from 31 kHz to 8 MHz (with 4x PLL option up to 32 MHz), 64 bytes of data RAM, 128 bytes of EEPROM data memory, and a 10-bit Analog-to-Digital Converter (ADC) with up to 8 channels. Peripherals include one 8-bit and one 16-bit timer, a Capture/Compare/PWM (CCP) module, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and a Comparator module with selectable reference. The nanoWatt Technology label reflects ultra-low power design: the PIC16F610 supports multiple power-managed modes including Run, Idle, and Sleep with typical Sleep current under 100 nA at 2V. On-chip in-circuit serial programming (ICSP) via two pins allows firmware updates without removing the part from the board. The internal oscillator eliminates the need for external crystals in cost-sensitive designs, while the 16-QFN exposed-pad package provides enhanced thermal dissipation and a compact 4x4 mm footprint for space-constrained applications. Typical applications include low-cost consumer electronics, battery-powered sensor nodes, LED lighting controllers, small appliance controls, security system peripherals, and general-purpose logic replacement. The combination of internal oscillator, ADC, and PWM peripherals also suits fan control, battery chargers, and simple closed-loop regulation tasks. When designing with the PIC16F610, note that the 16-QFN exposed pad must be soldered to the PCB ground plane for thermal performance and electrical ground integrity. The /ML suffix indicates tape-and-reel packaging on the 16-lead QFN variant, while /SL, /P, and /ST suffixes denote SOIC, PDIP, and TSSOP packages of the same silicon. Configure the configuration bits (CONFIG register) early in firmware to set oscillator mode, watchdog, code protection, and brown-out reset thresholds. For applications requiring more program memory, I/O, or peripherals, the pin-compatible PIC16F616 doubles the Flash (3.5KB) and adds additional comparators. This page synthesizes distributor inventory data, parametric cross-references from Microchip's compatibility tools, and practical design notes not collected in the manufacturer datasheet, helping engineers and buyers evaluate the PIC16F610T-I/ML against drop-in alternatives and select the right tape-and-reel variant for production.

RFC Hubungi kami

PIC16F610T-I/SL

PIC16F610T-I/SL - 8-Bit 20MHz MCU, 1.75KB Flash | Microchip

The Microchip Technology PIC16F610T-I/SL is an 8-bit flash-based CMOS microcontroller from the PIC16 family, featuring a 20 MHz maximum operating frequency, 1.75 KB (1K x 14) of program flash memory, 64 bytes of RAM, and 11 I/O pins, all integrated in a 14-pin SOIC package. It operates from 2.0V to 5.5V across the industrial temperature range of -40 °C to +85 °C, and includes an internal oscillator that simplifies BOM cost by eliminating external clock components. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and peripherals such as timers, ADCs, and communication interfaces. The PIC16F610 belongs to Microchip's mid-range PIC16F family, which targets cost-sensitive 8-bit embedded applications where deterministic interrupt response and ultra-low power consumption are critical. As an 8-bit RISC architecture, it executes most instructions in a single 200 ns cycle and provides an 8-level deep hardware stack for interrupt and subroutine handling. The hierarchy is: PIC16F610 -> PIC16 family -> 8-bit PIC microcontroller -> Microcontroller -> Integrated Circuit -> Semiconductor. Key features include 35 single-word instructions, an enhanced Flash program memory cell rated for 100K erase/write cycles, nanoWatt power-management technology with multiple idle and sleep modes, and a programmable watchdog timer for reliable field operation. The device also integrates a 10-bit ADC, comparators, PWM modules, and enhanced USART/CCP peripherals, enabling it to replace multiple discrete components in mixed-signal embedded designs. Typical applications include low-cost remote controls, small appliance controllers, sensor interface nodes, battery-powered instruments, LED lighting drivers, and consumer electronics where a small-footprint 8-bit MCU is sufficient. Designers often select the PIC16F610T-I/SL for new designs and the PIC16F610T-I/SLVAO automotive-grade counterpart for AEC-Q100 environments. When designing with this device, ensure the ICSP programming header is brought out to a 6-pin in-circuit serial programming connector to simplify firmware updates in production. The internal oscillator accuracy is typically +/- 2% over voltage and temperature, which is adequate for UART communication below 19.2 kbaud but may require calibration for higher baud rates.

RFC Hubungi kami

PIC16F616-E/ML

PIC16F616-E/ML - 8-Bit 20MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC16F616-E/ML is an 8-bit PIC microcontroller with 3.5KB (2K x 14) of Flash program memory, 128 bytes of SRAM, and an integrated internal oscillator, packaged in a 16-pin QFN (4x4 mm) with exposed thermal pad. It executes instructions at 20 MHz using a 14-bit instruction word and is powered from 2.0V to 5.5V across the industrial -40C to +125C range. A PIC16F microcontroller is a RISC-based 8-bit MCU family from Microchip using a Harvard architecture with separate program and data buses, executing most instructions in a single cycle. The PIC16F616 belongs to the mid-range PIC16F family with enhanced 14-bit core, nanoWatt power management, and a peripheral set targeting low-power and mixed-signal embedded designs. Key features include 11 digital I/O pins, 8-channel 10-bit ADC, two comparators, enhanced PWM/Capture/Compare modules, and an internal 8 MHz oscillator with PLL support. The nanoWatt technology provides multiple power-saving modes including idle, sleep, and ultra-low-power wake-up, with currents in the microamp range for battery-operated designs. The architecture uses a 14-bit instruction word with an 8-level deep hardware stack, two-cycle branches, and single-cycle execution for most instructions. Programmable weak pull-ups, interrupt-on-change, and selectable oscillator options (internal, external, crystal) give flexibility across consumer, industrial, and automotive subsystems. Typical applications include LED lighting control, battery chargers, sensor signal conditioning, small appliance controllers, automotive body electronics, and remote controls. The 16-QFN package suits space-constrained designs where analog integration, low power, and small footprint are priorities. When designing with this device, allocate sufficient PCB copper under the exposed pad for thermal dissipation, especially at high CPU activity. Use decoupling capacitors close to VDD, and ensure ICSP programming pins are accessible for in-circuit firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet. Engineers evaluating the PIC16F616 family for cost-sensitive 8-bit designs can use the comparison and FAQ sections to confirm fit against newer-generation replacements such as the PIC16F15323.

RFC Hubungi kami

PIC16F616-E/P

PIC16F616-E/P - 8-Bit 20MHz 3.5KB Flash MCU 14-PDIP | Microchip

The Microchip Technology PIC16F616-E/P is a 14-pin DIP-packaged 8-bit CMOS flash microcontroller from the PIC16 mid-range family, featuring 3.5 KB (2K x 14) of flash program memory, 128 bytes of RAM, 11 I/O pins, and a 20 MHz internal oscillator. It operates across 2.0V to 5.5V and integrates nanoWatt power-management technology with brown-out reset, power-on reset, PWM, ADC, and an enhanced mid-range 14-bit instruction core. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data bus. Flash-based MCUs allow in-circuit reprogrammability for field upgrades and shorter development cycles. The PIC mid-range family uses a RISC-style Harvard architecture with a single accumulator (WREG), a small fixed instruction set, and a 14-bit wide program word that delivers 200 ns instruction execution at 20 MHz. The PIC16F616 sits in the PIC16F616/16HV616 sub-family, sharing the same peripheral set with the PIC16F610/16HV610 but offering more program memory. Key features of the PIC16F616 include 3.5 KB flash program memory (2K x 14), 128 bytes of data RAM, 256 bytes of EEPROM, an 8-channel 10-bit ADC, one enhanced capture/compare/PWM module, two comparators, an internal 8 MHz oscillator with PLL, and nanoWatt sleep modes drawing under 50 nA typical. The 14-pin PDIP package (0.300 inch, 7.62 mm width) is through-hole and easy to breadboard, making the part friendly for hobby and education use. Architecturally the device uses an enhanced mid-range core with hardware multiplier support, a 16-level hardware stack, and 35 single-word instructions. The nanoWatt features (INTOSC, LF-INTOSC, Sleep, Watchdog Timer with separate on-chip oscillator) let the MCU drop quiescent current into the nanoampere range, which matters for battery-powered sensing nodes. The wide 2.0V to 5.5V operating range also supports both 3.3V and 5V system rails without level shifters. Typical applications include low-power sensor nodes, battery chargers, LED lighting controllers, automotive body electronics (where AEC-Q100 grade is not required), consumer white goods, fan and pump controllers, and small appliance user interfaces. The PIC16F616 is a cost-down option for designs that need more flash than the PIC16F610 (1.75 KB) but do not need the full PIC16F88X family. When designing with this device, plan for one hardware toolchain (MPLAB X IDE plus XC8 compiler) and reserve pins for ICSP programming (RB6/RB7 plus MCLR) - field firmware updates require these pins to remain accessible. The E/P suffix indicates the -40C to +125C extended temperature range in plastic PDIP, suitable for industrial enclosures. This page synthesizes distributor pricing, drop-in same-package alternatives, application guidance, and design notes not found in a single manufacturer datasheet.

RFC Hubungi kami

PIC16F616-E/ST

PIC16F616-E/ST - 8-bit Flash MCU, 3.5KB, 14-TSSOP | Microchip

The Microchip Technology PIC16F616-E/ST is a 14-pin, flash-based 8-bit CMOS microcontroller from the mid-range PIC16 family, featuring a RISC architecture with 3.5KB (2K x 14) of flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM, operating at up to 20 MHz with a 200 ns instruction cycle. Housed in a 14-pin Thin Shrink Small Outline Package (TSSOP-14), the device integrates an enhanced mid-range core with 16-level hardware stack, an 8-channel 10-bit Analog-to-Digital Converter (ADC), two 8-bit timers plus one 16-bit timer, and a built-in hardware comparator. The "E" suffix denotes the extended temperature range of -40C to +125C, while the "/ST" suffix identifies the TSSOP-14 surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, peripherals, and I/O on one die; the "mid-range" PIC16 family balances cost, low power consumption, and a rich peripheral set for general-purpose embedded control. The PIC16F616 sits within the PIC16F6xx hierarchy (PIC16F610/616/16HV610/16HV616), tailored for applications that need small footprint, on-chip ADC, PWM, and ultra-low-power operation through nanoWatt Technology. Its place in the broader taxonomy is: microcontroller -> 8-bit MCU -> flash MCU -> mid-range PIC -> 14-pin flash-based MCU. Key differentiating features include nanoWatt Technology for low-power sleep modes, a precision internal 8 MHz oscillator (calibrated to within 1% over voltage and temperature), enhanced capture/compare/PWM (ECCP) module, and a wide operating voltage range of 2.0V to 5.5V. The 10-bit ADC with 8 channels supports both analog signal sampling and capacitive touch sensing via the mTouch SDK, and the on-chip hardware comparator enables zero-crossing detection for power-conversion feedback loops. The PIC16F616 uses a Harvard architecture with separate program and data buses, allowing simultaneous fetch and access, and a 14-bit instruction word optimized for C and assembly efficiency. The 35 single-word instruction set simplifies code generation while keeping execution deterministic, ideal for hard real-time control loops. The internal oscillator eliminates the need for an external crystal in cost-sensitive designs, reducing BOM and board area. Typical applications include LED driving and lighting controls, battery chargers, smart sensor nodes, consumer appliance user interfaces, capacitive-touch buttons, and small motor control via PWM. The device is also widely used in education, low-end IoT end nodes, and toys where low cost and reliable flash-based in-circuit serial programming (ICSP) are priorities. When designing with the PIC16F616, pay attention to MCLR/ICSP pin handling during programming - the PIC16F616 requires high-voltage programming (HVP) which NSDSP and similar programmers route through a high-voltage extension; low-voltage ICSP alone is not supported. Stable decoupling and a 100 nF capacitor across VDD/VSS are essential for ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives across the PIC16F family, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami

PIC16F616-H/ML

PIC16F616-H/ML - 8-bit 20MHz 3.5KB Flash MCU 16-QFN | Microchip

The Microchip Technology PIC16F616-H/ML is a high-temperature-grade 8-bit PIC16 microcontroller featuring a 20 MHz CPU, 3.5 KB (2K x 14) of Flash program memory, 128 bytes of RAM, and an integrated internal oscillator, all housed in a 16-pin QFN (4x4 mm) exposed-pad package. It is a member of the PIC16F61X family designed for automotive and industrial applications that require extended thermal tolerance. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The PIC16F616 belongs to the 8-bit RISC PIC family, which sits within the broader microcontroller hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. The PIC architecture uses a Harvard design with separate program and data buses and a small, fixed-length instruction set, giving it deterministic timing and very low power consumption relative to 32-bit alternatives. Key features include 11 I/O pins, an 8-level hardware stack, 35 single-word instructions, an internal oscillator up to 8 MHz (with 20 MHz external support), and on-chip peripherals such as a 10-bit ADC, comparators, PWM modules, and a watchdog timer. The device also supports in-circuit serial programming (ICSP), enabling field firmware updates. Architecturally, the PIC16F616 uses a RISC core with 14-bit instruction words and a modified Harvard memory layout. The high-temperature ("-H") variant extends the operating range up to +150 C, distinguishing it from the standard -40C to +125C industrial grade and making it suitable for under-hood automotive electronics. Typical applications include automotive body and chassis modules, HVAC fan controllers, intelligent battery management, sensor signal conditioning, low-cost motor control, and lighting ballast control. The exposed-pad 16-QFN (4x4) package provides a low thermal-resistance path that complements the high-temperature grade. When designing with this device, allocate adequate PCB copper under the exposed pad to maintain junction temperature within the derating curve, and use the ICSP pins (ICSPCLK/ICSPDAT) for both in-circuit programming and in-application debugging via MPLAB X IDE. This page consolidates distributor pricing, drop-in alternatives, and practical design guidance that goes beyond the manufacturer datasheet's pin and electrical tables, helping engineers accelerate selection and qualification.

RFC Hubungi kami

PIC16F616-I/ML

PIC16F616-I/ML - 8-Bit MCU, 20MHz, 3.5KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F616-I/ML is a mid-range 8-bit PIC® RISC flash microcontroller delivering 20 MHz CPU performance from a 3.5 KB (2K x 14) Flash program memory and 128 bytes of RAM, housed in a 16-pin QFN (4x4 mm) package. The device integrates an 11-channel 10-bit ADC, two 8-bit timers, one 16-bit timer, enhanced PWM/capture/compare modules, and a comparator, operating from a wide 2.0V to 5.5V supply. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as ADC, timers, communication interfaces, and I/O. The PIC16F616 belongs to Microchip's PIC16 mid-range family - one tier above baseline PIC10/12 devices - offering enhanced peripherals, interrupts, and C-compiler-friendly architecture while keeping instruction execution simple (35 single-word instructions). In the hierarchy, PIC16F616 sits under: 8-bit PIC -> PIC16 mid-range -> enhanced mid-range core -> flash-based MCU -> microcontroller -> embedded IC. Key differentiating features include nanoWatt XLP™ ultra-low-power technology with < 1 µA sleep current, an internal 8 MHz high-speed oscillator that eliminates external crystals in many designs, an on-chip voltage reference for ADC, and a robust peripheral set for sensor and motor control. The PIC16F616-I/ML also features Microchip's ICD (In-Circuit Debugger) interface for real-time development via MPLAB X IDE, and is supported by a free toolchain including the XC8 compiler. Typical applications span consumer appliance control, LED lighting drivers, battery chargers, sensor signal conditioning, small motor control (fans, pumps), automotive body electronics, and IoT edge nodes where low quiescent current is critical. Industrial use cases include HVAC actuators, security keypads, and remote controls. When designing, note the 16-QFN package's thermal pad must be soldered to the PCB ground pour for proper heat dissipation and electrical performance. The internal oscillator accuracy (±1% typical) is sufficient for UART at common baud rates but may require calibration for timing-sensitive protocols. The '-I' suffix denotes the industrial temperature grade (-40°C to +85°C). This page synthesizes distributor pricing, parametric drop-in alternatives from Microchip's enhanced mid-range family, and practical design notes not collated on any single distributor page.

RFC Hubungi kami

PIC16F616-I/P

PIC16F616-I/P - 8-bit MCU, 3.5KB Flash, 20MHz, DIP-14 | Microchip

The Microchip Technology PIC16F616-I/P is an 8-bit flash-based CMOS microcontroller built on the enhanced mid-range PIC16 architecture, offering 3.5 KB (2K x 14) of program Flash memory, 128 bytes of RAM, and 256 bytes of EEPROM in a 14-pin PDIP through-hole package. It executes instructions at 20 MHz with a 200 ns instruction cycle and operates from 2.0V to 5.5V across an industrial -40C to +125C temperature range. The -I/P suffix indicates industrial temperature grade and PDIP package style. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), non-volatile data memory (EEPROM), and configurable digital I/O onto one piece of silicon. The PIC16F616 family sits within Microchip's broad PIC16 mid-range MCU hierarchy (PIC10/PIC12/PIC16/PIC18) under the broader category of 8-bit microcontrollers, which sit alongside 16-bit and 32-bit MCUs in the embedded semiconductor taxonomy. The 'mid-range' label refers to the enhanced 14-bit instruction set, which balances code density, deterministic interrupt latency, and ease of C/assembly programming for cost-sensitive embedded designs. Key features include an internal 8 MHz / 32 kHz oscillator with PLL for 32 MHz operation, a 10-bit ADC with 8 channels, two 8-bit timers plus one 16-bit timer, an Enhanced Capture/Compare/PWM (ECCP) module, and a Comparator with 2 channels. The CIP (Core Independent Peripherals) architecture lets the on-chip PWM, ADC, and comparator run without CPU intervention, reducing firmware complexity for motor, lighting, and sensor-control loops. The device also integrates nanoWatt power-saving modes (Sleep, Idle, Low-Power Timer1), an enhanced watchdog timer, in-circuit serial programming (ICSP) via two pins, and on-chip debug support, all in a RoHS-compliant PDIP-14 footprint. The Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) and Synchronous Serial Port (SSP) provide flexible serial connectivity for UART, SPI, and I2C interfaces. Typical applications include LED lighting ballasts and dimmer control, consumer appliance control boards, low-cost IoT sensor nodes, battery chargers, remote controls, and simple motor-control daughterboards. The wide 2.0V-5.5V supply range and ultra-low Sleep current (down to 50 nA typical) make the PIC16F616 particularly attractive for battery-powered or energy-harvesting designs. The 8 KB (4K x 14) Flash variant PIC16HV610 shares the same pinout, easing migration for higher-memory designs. The device is in production, though Microchip recommends PIC16F15323 as the newer migration target for new designs. When designing with this MCU, place the ICSP clock and data signals (RB6/RB7) on dedicated test-pad footprints so production firmware can be programmed and debugged without removing the chip from the board. Selecting the right oscillator mode (INTOSCIO vs EC vs HS) and keeping the config-word bits under version control avoids board bring-up surprises when shifting between PIC16F610/616/610T/616T variants in the same socket. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the Microchip datasheet alone.

RFC Hubungi kami

PIC16F616T-I/ST

PIC16F616T-I/ST - 8-Bit 20MHz 3.5KB Flash MCU | Microchip

The Microchip PIC16F616T-I/ST is a 14-pin, flash-based 8-bit CMOS microcontroller from the PIC16 family, featuring a RISC architecture running at up to 20 MHz, 3.5 KB (2K x 14) of Flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM, housed in a 14-pin TSSOP package. The "T" suffix indicates tape-and-reel packaging while "I" denotes the industrial temperature grade of -40C to +85C, and the operating voltage range spans 2.0V to 5.5V. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals including timers, ADC, communication interfaces, and I/O ports. The PIC16F616 belongs to the enhanced mid-range PIC16F family which uses a 14-bit instruction word architecture, and within the broader product hierarchy it sits as: PIC16F616 -> PIC16 family -> 8-bit PIC microcontroller -> microcontroller -> embedded IC -> semiconductor. Its nanoWatt technology provides multiple power-saving modes critical for battery-powered designs. Key differentiating features include a 10-bit ADC with up to 8 channels, two 8-bit timers plus one 16-bit timer, an enhanced PWM module, an internal 8 MHz oscillator with software calibration, and an integrated comparator. The device also supports In-Circuit Serial Programming (ICSP) and In-Circuit Debugging (ICD), reducing development tooling cost. The PIC16F616 employs a Harvard architecture with separate program and data buses, providing deterministic instruction execution and high code density. The 14-bit instruction set and 35 instruction opcode enable efficient C and assembly programming, while the nanoWatt power management supports run, idle, and sleep modes with current consumption as low as a few hundred nanoamperes in sleep. Typical applications include LED lighting control with dimming, battery chargers, small appliance controllers, fan speed controllers, power tools, remote controls, sensor interface modules, and any cost-sensitive embedded design requiring flash re-programmability and low power. The internal oscillator eliminates an external crystal in many designs, reducing BOM cost. A key design consideration is selecting the appropriate oscillator configuration: the internal 8 MHz oscillator is sufficient for many UART and timing applications but the external crystal is preferred for high-precision timing or USB. Designers should also consider migration to the pin-compatible PIC16F610 family when fewer features are needed. This page synthesizes distributor pricing, drop-in compatible PIC16 family alternatives, and practical design notes not found in the bare manufacturer datasheet, helping engineers evaluate the PIC16F616T-I/ST against modern mid-range MCU alternatives for both new designs and legacy board refreshes.

RFC Hubungi kami

PIC16F627-04/P

PIC16F627-04/P - 4MHz 8-Bit Flash MCU, 1.75KB | Microchip

The Microchip Technology PIC16F627-04/P is a 4 MHz 8-bit Flash-based CMOS microcontroller from the PIC16F62X mid-range family, packaged in a 18-pin PDIP (0.300 in, 7.62 mm) through-hole format. According to the Microchip datasheet (DS40144D-family), the device integrates 1.75 KB of Flash program memory (1K x 14 words), 224 bytes of RAM, 128 bytes of EEPROM, and a Harvard RISC architecture that executes instructions in 200 ns per cycle at 4 MHz. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and I/O peripherals on one die; the 8-bit data path means arithmetic and data movement operate on 8-bit bytes. Mid-range PIC MCUs sit between baseline (10-/12-bit instruction) and enhanced mid-range / 16-bit families in Microchip's portfolio, offering a balance of code density, peripheral richness, and cost for embedded control. PIC16F627-04/P belongs to the PIC16F mid-range family and is widely used as an upgrade path from legacy PIC16C/16F devices. Key features of the PIC16F627-04/P include: a 4 MHz internal oscillator / external clock option, 16 digital I/O pins with high-current sink/source capability, an internal 4 MHz RC oscillator, two 8-bit timers plus one 16-bit timer (Timer1), a 10-bit PWM module, an analog comparator with absolute voltage reference, a USART module for serial communication, and an internal watchdog timer with its own RC oscillator. The wide 4.5 V to 5.5 V operating range and industrial -40 C to +85 C temperature grade support harsh-environment designs. Architecturally, the PIC16F627-04/P uses a 14-bit instruction word, separate program and data buses (Harvard), and 35 single-word instructions - making assembly programming compact and C compilation efficient. The on-chip in-circuit serial programming (ICSP) interface enables firmware updates after PCB assembly, while the flash program memory supports 100,000 erase/write cycles, allowing field-reconfigurable designs. Typical applications include appliance controls, security and alarm panels, automotive body electronics (non-safety), industrial sensor interfaces, low-end remote controls, and general-purpose 8-bit embedded logic replacement. The PDIP-18 footprint simplifies breadboard prototyping and through-hole hobbyist designs, while the wide ecosystem of MPLAB X IDE, XC8 compiler, and PICkit programmers lowers development cost. When designing with this MCU, ensure the supply decoupling network (100 nF + 10 uF bulk) sits within 50 mm of the VDD/VDD2 pins, and follow Microchip's recommended analog/digital ground partitioning when using the comparator with PWM to avoid switching noise coupling. For battery-powered designs, prefer the PIC16F627-04I/P (industrial -40 to +85 C variant) or the PIC16F628A for additional code space. This page synthesizes verified distributor stock and pricing, drop-in alternative MPNs, and design considerations not aggregated on the Microchip datasheet PDF - giving procurement engineers and designers a one-stop summary for sourcing and second-source decisions.

RFC Hubungi kami

PIC16F627-04/SO

PIC16F627-04/SO - 8-bit 4MHz 1.75KB Flash MCU 18-SOIC | Microchip

The Microchip PIC16F627-04/SO is an 8-bit CMOS Flash-based mid-range microcontroller (MCU) running at 4 MHz instruction execution with 1.75 KB (1K x 14) of on-chip Flash program memory, housed in an 18-pin SOIC (Small Outline IC) package. It belongs to Microchip's PIC16F62X family and uses the Harvard RISC architecture, providing 200 ns instruction execution across 35 single-word instructions. The device operates from 3.0 V to 5.5 V supply, supporting both 3.3 V and 5 V system designs. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, RAM, Flash/ROM program memory, and peripherals such as timers, ADC, and I/O ports on a single die. MCUs sit at the top of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC16F62X family's mid-range 14-bit instruction word places it between PIC10/12/14 baseline (12-bit) and PIC18 enhanced (16-bit) cores, balancing code density, peripheral richness, and ease of programming. Key features include 224 bytes of RAM, 128 bytes of EEPROM data memory, 16 digital I/O pins, two 8-bit timers plus one 16-bit timer, a 10-bit ADC (multiplexed with comparator inputs), a USART module, an internal 4 MHz oscillator, and a comparator with voltage reference. The 4 MHz speed grade is indicated by the "-04" suffix; an "-20" suffix part runs up to 20 MHz. Brown-out reset (BOR), power-on reset (POR), and watchdog timer (WDT) provide robust field deployment. Architecturally, the PIC16F627 implements a Harvard bus with separate program and data paths, allowing instruction fetch and data access to overlap, which is why one cycle per instruction is achievable. The 14-bit instruction width is wider than baseline PIC cores, giving more addressing modes and richer peripheral control in a single opcode. The 18-SOIC package offers 0.295 inch (7.50 mm) body width with gull-wing leads for surface-mount assembly. Typical applications include consumer appliances, low-end remote controls, sensor signal conditioning, LED driving, battery chargers, automotive body controllers, and industrial control. The on-chip peripherals make it well suited to standalone "sense, decide, act" tasks that do not need higher-end 32-bit MCUs. When designing with this part, place decoupling capacitors (100 nF plus 10 uF) within a few millimeters of VDD/VSS, route the MCLR pin through a 10 kohm pull-up if not used as a reset, and verify the configuration word matches the chosen oscillator mode. Industrial and automotive designs should consider the PIC16F627-04I/SO (extended temperature) or PIC16F628A variant for 20 MHz operation. This page synthesizes distributor stock levels, drop-in same-package alternatives, pricing tiers, and practical design notes for the PIC16F627-04/SO - data not consolidated on a single manufacturer or distributor page.

RFC Hubungi kami

PIC16F627-04/SS

PIC16F627-04/SS - 4MHz 8-bit Flash MCU 1.75KB | Microchip

The Microchip Technology PIC16F627-04/SS is an 8-bit Flash-based CMOS microcontroller from the PIC16F62X family, operating at up to 4MHz with 1.75KB (1K x 14) of Flash program memory, packaged in a 20-pin SSOP (Shrink Small Outline Package) for surface-mount designs. It integrates 224 bytes of RAM, 128 bytes of EEPROM, 16 digital I/O pins, a USART module, an analog comparator with programmable on-chip voltage reference, a Capture/Compare/PWM (CCP) module, and a watchdog timer in a compact 7.2mm x 5.4mm SSOP-20 footprint. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto a single die. The PIC16F62X family uses a Harvard RISC architecture with separate program and data buses, 35 single-word instructions, and a 200ns instruction execution time, which enables deterministic real-time control in cost-sensitive embedded applications. The PIC16F627 sits in the low-tier of this family and is widely used as a stepping stone between simple 10/12F devices and larger PIC16F87X controllers. Key features of the PIC16F627-04/SS include: 4MHz maximum clock (the "-04" suffix denotes the 4MHz speed grade), 16 I/O pins with individual direction control, high-current sink/source capable of directly driving LEDs, brown-out reset (BOR) and power-on reset (POR), an analog comparator module with programmable voltage reference, and one 10-bit PWM output. The device operates over the commercial 0°C to +70°C range (industrial -40°C to +85°C variants use the "-I" suffix). The PIC16F62X architecture uses a 14-bit instruction word with a two-stage pipeline, a hardware stack of 8 levels, and 16 special-function hardware registers. The integrated USART supports RS-232/RS-485 asynchronous communication up to the Fosc/16 bit rate, while the CCP module can operate in Capture, Compare, or 10-bit PWM mode. The on-chip 4MHz internal oscillator (with software-selectable frequencies from 31kHz to 4MHz via the OSCCAL register) eliminates the need for an external crystal in many cost-sensitive applications. Typical applications include consumer appliance control, LED lighting controllers, small motor control, remote controls, security sensor interfaces, and low-end industrial control. The PIC16F627's small footprint, low cost, and integrated peripherals make it well-suited for designs where a full-featured MCU would be over-spec and an 8-pin device would lack I/O. When designing with the PIC16F627-04/SS, ensure your supply voltage is within 2.0V to 5.5V (typical 3.3V/5V operation), provide adequate decoupling at VDD/VSS, and configure the CONFIG register for the desired oscillator and reset source. The MCLR pin must be pulled high through a resistor for normal operation, and unused I/O pins should be configured as outputs low to minimize current draw. This page synthesizes distributor pricing, drop-in same-package alternatives in the PIC16F62X family, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami

PIC16F627-04E/P

PIC16F627-04E/P - 8-bit Flash MCU, 4MHz, 1.75KB, 18-DIP | Microchip

The Microchip Technology PIC16F627-04E/P is a flash-based 8-bit CMOS microcontroller from the PIC16F62X family, packaged in an 18-pin PDIP (0.300 inch, plastic DIP) and specified for 4 MHz oscillator operation with a 2.0V-5.5V supply range (extended -40C to +125C operating temperature for the /E industrial grade). The device integrates a RISC Harvard-architecture CPU executing one instruction per 200 ns cycle, 1.75 KB of Flash program memory (1K x 14), 224 bytes of RAM, 128 bytes of EEPROM data memory, and 11 general-purpose I/O pins with programmable weak pull-ups on PORTB. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash/ROM/EPROM), data memory, timers, interrupts, and I/O peripherals on one die. Within the broader taxonomy, the PIC16F627 sits in the mid-range 8-bit PIC16 family of MCUs -> 8-bit microcontrollers -> microcontrollers (MCUs) -> microprocessors and microcontrollers -> semiconductor ICs -> integrated circuits. The RISC Harvard architecture used by PIC16F62X separates program and data buses, enabling simultaneous instruction fetch and data access, which yields deterministic instruction timing suitable for real-time embedded control. Key differentiating features include a hardware USART for asynchronous serial communication, a capture/compare/PWM (CCP) module, two 8-bit timers (TMR0/TMR2) plus one 16-bit timer (TMR1), a watchdog timer (WDT) with its own dedicated on-chip RC oscillator for reliable operation independent of the system clock, brown-out detect (BOD), power-on reset (POR), power-up timer (PWRT), and oscillator start-up timer (OST). The instruction set comprises only 35 single-word instructions, easing firmware development. The /E suffix denotes the extended (-40C to +125C) industrial temperature range. Architecturally the PIC16F627 uses a 14-bit wide instruction word and supports both internal and external oscillator modes (LP, XT, HS, RC, INTOSC), with an internal 4 MHz RC oscillator available. The Flash memory supports in-circuit serial programming (ICSP) via the RB6/RB7 pins plus MCLR, enabling in-field firmware updates without removing the device from the board. Typical applications include low-cost remote controls, sensor signal conditioning front-ends, simple motor control loops, RS-232/RS-485 protocol bridges, appliance control boards, battery chargers, and consumer white-goods control panels. The compact 18-pin DIP form factor also makes the part a popular choice for hobbyist, education, and breadboard-prototype development. Designers should allocate the MCLR pin with the standard 10 kohm pull-up to VDD and the recommended 100 nF decoupling capacitor on VDD placed within 5 mm of the pin. The /E extended temperature grade makes the part well-suited to automotive under-hood and industrial cabinet environments where commercial-grade 0C to +70C parts would fail. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC16F62X family, and practical engineering design notes not found in the bare datasheet.

RFC Hubungi kami

Subkategori

Produk (39,000+)

PIC16F59-E/PT - 20MHz 8-Bit MCU, 3KB Flash | Microchip

PIC16F59-I/P - 8-Bit 20MHz 3KB Flash MCU 32 I/O | Microchip

PIC16F59-I/PT - 8-Bit 20MHz PIC MCU, 3KB Flash, 44-TQFP | Microchip

PIC16F59T-I/PT - 8-Bit 20MHz 3KB Flash MCU, 32 I/O | Microchip

PIC16F610-E/ML - 8-bit MCU 1.75KB Flash 16VQFN | Microchip

PIC16F610-E/P - 1.75KB Flash 8-bit MCU | Microchip | 14-PDIP

PIC16F610-E/ST - 8-Bit MCU 1.75KB Flash 20MHz TSSOP-14 | Microchip

PIC16F610-I/ML - 8-bit 20MHz 1.75KB Flash MCU | Microchip

PIC16F610-I/P - 8-Bit 20MHz Flash MCU | Microchip Technology

PIC16F610-I/SL - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip

PIC16F610-I/ST - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip TSSOP-14

PIC16F610T-I/ML - 1.75KB Flash 8-bit MCU, 16-QFN | Microchip

PIC16F610T-I/SL - 8-Bit 20MHz MCU, 1.75KB Flash | Microchip

PIC16F616-E/ML - 8-Bit 20MHz 3.5KB Flash MCU | Microchip

PIC16F616-E/P - 8-Bit 20MHz 3.5KB Flash MCU 14-PDIP | Microchip

PIC16F616-E/ST - 8-bit Flash MCU, 3.5KB, 14-TSSOP | Microchip

PIC16F616-H/ML - 8-bit 20MHz 3.5KB Flash MCU 16-QFN | Microchip

PIC16F616-I/ML - 8-Bit MCU, 20MHz, 3.5KB Flash, 16-QFN | Microchip

PIC16F616-I/P - 8-bit MCU, 3.5KB Flash, 20MHz, DIP-14 | Microchip

PIC16F616T-I/ST - 8-Bit 20MHz 3.5KB Flash MCU | Microchip

PIC16F627-04/P - 4MHz 8-Bit Flash MCU, 1.75KB | Microchip

PIC16F627-04/SO - 8-bit 4MHz 1.75KB Flash MCU 18-SOIC | Microchip

PIC16F627-04/SS - 4MHz 8-bit Flash MCU 1.75KB | Microchip

PIC16F627-04E/P - 8-bit Flash MCU, 4MHz, 1.75KB, 18-DIP | Microchip