Litar Bersepadu

Subkategori

📁 ADC/DAC 3,100+ produk 📁 IC Penguat 1,700+ produk 📁 Kodek Audio 18 produk 📁 IC Audio 2 produk 📁 Jam & Pemasa 640+ produk 📁 Comparator ICs 1 produk 📁 DSP 1,100+ produk 📁 IC Perolehan Data 2 produk 📁 Potensiometer Digital 4 produk 📁 Pemacu & Pengawal Paparan 1 produk 📁 FPGA & CPLD 7,100+ produk 📁 IC Antara Muka 3,100+ produk 📁 Pemacu LED 1 produk 📁 IC Logik 450+ produk 📁 IC Memori 870+ produk 📁 Mikropengawal 20,000+ produk 📁 Mikropemproses 4 produk 📁 Pemacu Motor 1 produk 📁 Lain-lain 1 produk 📁 Antara Muka Penderia dan Pengesan 1 produk 📁 IC Khusus 15 produk 📁 IC Video 13 produk

Produk (38,000+)

XMC4200Q48F256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48F256ABXUMA1

XMC4200Q48F256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4200Q48F256ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 256 KB of embedded Flash and 40 KB of SRAM in a 48-pin VQFN package with an exposed pad. It is identified as an industrial microcontroller and combines a 3.3 V supply rating with an Arm Cortex-M4 processor core for embedded control applications. A microcontroller is a semiconductor integrated circuit that integrates a processor core, programmable memory, data memory, and peripherals into one device. The Arm Cortex-M4 core provides a 32-bit processing architecture suitable for industrial embedded systems, while the XMC4200 combines that processing capability with a balance of Flash and SRAM. Its hardware platform is intended to reduce system complexity by placing the core, memory, and embedded control functions in a single component. The principal device characteristics visible in the ordering information include an 80 MHz operating frequency, 256 KB of Flash memory, 40 KB of SRAM, and a 3.3 V supply rating. The 48-VFQFN package includes 48 pins and an exposed pad. This compact surface-mount format is suitable for space-conscious industrial controller designs, although thermal performance and exposed-pad layout must be evaluated as part of the PCB implementation. The XMC4000 family architecture is based on the Arm Cortex-M4 processor core and is positioned for energy-efficient, high-performance embedded industrial control. The combination of 256 KB Flash and 40 KB SRAM provides a meaningful code and working-data budget for control loops, communication handling, state management, and supervisory functions. Exact peripheral configurations, interrupt behavior, analog performance, and electrical limits must be confirmed against the complete manufacturer datasheet for the selected ordering code. Typical design roles for this microcontroller include industrial automation controllers, condition-monitoring equipment, motor and motion-control subsystems, communications-oriented embedded nodes, and compact control platforms. Its 80 MHz Cortex-M4 performance is suitable for deterministic control workloads, while its memory capacity can support moderate application code and working buffers without requiring an external memory interface when the application remains within those limits. PCB implementation requires careful attention to the 48-VFQFN exposed pad, power-supply routing, high-frequency return paths, and decoupling capacitor placement. The exposed pad should be connected according to the manufacturer land-pattern and thermal guidance. Firmware must also account for the exact peripheral set, pin multiplexing, startup behavior, and electrical operating limits documented for this ordering designation. This product record combines the manufacturer ordering information, the XMC4100/XMC4200 family datasheet, and distributor technical summaries into an engineering-focused overview. It also identifies the absence of a verified pin-compatible alternative, avoids treating a related lower-memory device as a drop-in replacement, and directs engineers to the manufacturer datasheet for final pin assignment, electrical limits, peripheral details, and PCB implementation requirements.

RFC Hubungi kami
XMC4200Q48F256BAXUMA1 - 80MHz Arm Cortex-M4 MCU | Infineon
XMC4200Q48F256BAXUMA1

XMC4200Q48F256BAXUMA1 - 80MHz Arm Cortex-M4 MCU | Infineon

The Infineon XMC4200Q48F256BAXUMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller with an 80 MHz operating frequency, 256 KB of embedded Flash memory, and 40 KB of SRAM in a 48-pin VQFN package with an exposed pad. It belongs to the XMC4000 family and integrates CAN and LIN networking, timer/PWM control, and general-purpose microcontroller resources for embedded industrial designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The XMC4000 family follows the hierarchy MCU, embedded microcontroller, microcontroller, and semiconductor. Its Arm Cortex-M4 core supports efficient real-time control while the CAN and LIN interfaces allow the device to communicate with industrial automation, automotive networking, and distributed control equipment. The XMC4200Q48F256BAXUMA1 combines 80 MHz processing performance with 256 KB of Flash and 40 KB of SRAM. The Flash memory provides room for application code and configuration data, while SRAM supports working memory, stack operations, buffers, and real-time data processing. Its integrated CAN and LIN connectivity reduces the need for external communication transceivers when designing networked embedded systems, although transceiver selection and bus protection remain board-level requirements. The XMC4200 part of the XMC4000 family is positioned for industrial control applications that benefit from an Arm Cortex-M4 processor and dedicated communication peripherals. Compared with a general-purpose Cortex-M4 design, this device integrates communication and timing resources into a compact 48-VQFN package. This consolidation can reduce board area when CAN, LIN, timers, and PWM functions are all required by the application. Typical applications include industrial automation controllers, CAN-based motor and machine controls, LIN-connected automotive sub-systems, distributed sensor nodes, industrial communication gateways, and compact embedded control panels. The combination of 256 KB Flash, 40 KB SRAM, and 80 MHz operation is suitable for protocol handling, supervisory logic, data acquisition, and closed-loop control without requiring a separate processor. PCB design should preserve the exposed-pad thermal and electrical requirements of the VQFN package. Use a manufacturer-compliant land pattern, connect the exposed pad to the appropriate ground plane, and place decoupling capacitors close to the power pins. Firmware deployment should also account for the 256 KB Flash limit, boot and application organization, communication timing, and the pin multiplexing required by the selected peripheral configuration. This page consolidates the component specifications, manufacturer documentation, package information, application guidance, and qualification criteria into a compact engineering reference. It also distinguishes pin-compatible family alternatives from options that require different firmware, package, peripheral, or qualification validation.

RFC Hubungi kami
XMC4200Q48K256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48K256ABXUMA1

XMC4200Q48K256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4200Q48K256ABXUMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller with an 80 MHz core, 256 KB of flash memory, 40 KB of SRAM, and a 48-pin VQFN package with an exposed pad. It is designed for embedded industrial control applications requiring deterministic real-time performance, flexible serial connectivity, and a compact surface-mount footprint. An Arm Cortex-M4 microcontroller is a reduced-instruction-set embedded processor within the microcontroller and semiconductor hierarchy. It combines processor performance, embedded flash, SRAM, peripherals, and interrupt-driven control in one integrated circuit. XMC devices belong to Infineon's XMC4000 family and target industrial automation, motor control, communications, sensing, and connected embedded equipment. Three defining specifications are the 80 MHz operating frequency, 256 KB flash, and 40 KB SRAM. The 80 MHz Cortex-M4 core supports efficient control-loop execution, while 256 KB of embedded flash accommodates application code and data. The 40 KB SRAM provides working memory for real-time algorithms and peripheral data handling. The package is a 48-terminal PG-VQFN with an exposed thermal pad for compact PCB placement and improved heat dissipation. The device is positioned for industrial environments requiring operation from -40°C to 125°C. Its microcontroller architecture integrates conventional digital control functions with dedicated peripherals for communication and timing, allowing designers to consolidate functions that otherwise require separate interface controllers. The exposed pad should be connected to the PCB ground plane according to the manufacturer's package guidance to optimize thermal and electrical performance. Typical applications include industrial automation controllers, sensor and condition-monitoring systems, motor-control equipment, communications gateways, and compact embedded control platforms. The 80 MHz processing rate is useful for proportional-integral-derivative control, state-machine execution, communication protocol handling, and signal processing. Its 256 KB flash supports moderately complex firmware while maintaining a compact 48-pin package. For PCB design, place the exposed pad on a dedicated solderable thermal and ground pad, preserve the manufacturer-recommended footprint dimensions, and provide short, low-impedance supply connections. Keep analog and communication interfaces away from fast digital return paths when the application includes sensitive measurements. Firmware configuration should also account for the industrial temperature rating and all peripheral operating constraints. This page combines the exact ordering information, core specifications, package information, design guidance, selection criteria, and verified same-family alternatives to support faster engineering evaluation and sourcing of the XMC4200Q48K256ABXUMA1.

RFC Hubungi kami
XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48K256BAXUMA1

XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4200Q48K256BAXUMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating up to 80 MHz, with 256 KB of flash memory, 40 KB of SRAM, CAN and LIN networking, and a 48-pin VQFN package with an exposed pad. It combines a hardware floating-point unit and high-resolution PWM timers with mixed-signal acquisition capabilities for motor-drive, motion-control, and industrial communication systems. An industrial microcontroller is a semiconductor device designed to execute real-time control, monitoring, and communication tasks in demanding embedded systems. The XMC4000 family belongs to the ARM Cortex-M4 microcontroller class, combining processor performance, embedded nonvolatile memory, RAM, communication peripherals, timers, and analog interfaces. This integration places the XMC4200 within the broader hierarchy of embedded processor, microcontroller, and industrial automation semiconductor categories. Principal features include an 80 MHz ARM Cortex-M4 core, 256 KB flash, 40 KB SRAM, hardware floating-point capability, dual CAN/LIN-oriented networking support, and high-resolution PWM timers. The 256 KB flash capacity provides room for application code, configuration data, and firmware updates, while the 40 KB SRAM supports real-time control state, communication buffers, and mixed-signal processing. The industrial temperature range extends from -40°C to 125°C. The target device is based on the Infineon XMC4200-Q48K256-BA, whose ordering information identifies 256 KB flash, 40 KB SRAM, and industrial-grade temperature operation. Distributor records describe the programmable part as a 48-lead PG-VQFN-53 package with an exposed thermal pad. Its CAN, LIN, timer/PWM, and mixed-signal resources support designs requiring deterministic control and networked fieldbus communication without relying solely on a general-purpose processor. Typical applications include servo and motor controllers, industrial CAN and LIN nodes, factory automation equipment, industrial sensor hubs, motion-control platforms, and mixed-signal monitoring systems. In each case, the MCU consolidates real-time processing and communication while reducing the number of discrete interface components required on the board. Designers should verify every peripheral assignment, pin multiplexing option, and exposed-pad connection against the manufacturer datasheet before layout release. Input and output signal integrity, CAN and LIN termination, clock configuration, decoupling, and thermal management are especially important in electrically noisy industrial environments. Firmware should also include watchdog, fault-state, and brownout recovery behavior appropriate to the target system. This page combines verified manufacturer and distributor specifications, commercial availability information, a strict drop-in assessment, and application-oriented design guidance. It distinguishes documented values from missing technical data so engineers can make sourcing and design decisions without mistaking unsupported assumptions for manufacturer specifications.

RFC Hubungi kami
XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon
XMC4300-F100F256

XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon

The Infineon XMC4300-F100F256 AA is a 32-bit ARM Cortex-M4 industrial microcontroller in a 100-pin LQFP package, featuring 256 KB of on-chip flash memory, 128 KB SRAM, and an integrated Ethernet MAC that natively supports EtherCAT slave operation. It is part of the XMC4000 family, which combines the Cortex-M4 core with DSP instructions and a single-precision FPU, plus Infineon's deterministic peripheral set designed for real-time industrial control. Background: An ARM Cortex-M4 microcontroller is a 32-bit MCU based on the ARMv7-M architecture that integrates a Thumb-2 instruction set, optional single-precision floating-point unit, and DSP extensions. Within the broader taxonomy, this places the XMC4300 as: microcontroller -> 32-bit MCU -> ARM Cortex-M4 MCU -> industrial-grade MCU -> real-time control MCU -> semiconductor. The XMC4000 family extends this with Infineon's peripheral subsystem for motor control, power conversion, and fieldbus communication. Key features of the XMC4300-F100F256 include a 144 MHz core clock, 128 KB of integrated SRAM with parity, hardware EtherCAT slave controller (ECAT), USB 2.0 full-speed OTG, up to four USIC channels for flexible serial communication (UART, SPI, I2C, I2S), two CAN nodes, and a 12-bit multi-channel ADC. The PG-LQFP-100-25 package with exposed pad supports an extended industrial temperature range of -40C to +85C. The on-chip EtherCAT Slave Controller (ESC) is the differentiating feature, enabling sub-millisecond cycle times without an external ASIC. At the architecture level, the XMC4300 uses an M-DSP/M-FPU Cortex-M4 core from ARM, paired with Infineon's proprietary peripheral interconnect and a hierarchical bus matrix that gives DMA-capable channels direct access to SRAM, peripherals, and the EtherCAT Dual Port RAM. The integrated EtherCAT Slave Controller offloads the EtherCAT state machine from the application CPU, leaving 144 MHz of compute available for the application layer. Typical use cases include EtherCAT slave IO modules, industrial sensor hubs, servo drive auxiliary controllers, PLC expansion modules, and building automation gateways. The XMC4300-F100F256 AA fits EtherCAT applications because the integrated ESC eliminates the need for an external ET1100 ASIC, reducing BOM cost and PCB area while still meeting EtherCAT conformance class compliance. Design consideration: the PG-LQFP-100-25 exposed-pad variant must be soldered to a sufficient copper pad on the PCB to dissipate up to ~1 W of internal dissipation; missing or weak thermal pad soldering can lead to thermal shutdown under sustained EtherCAT and CPU load. This page synthesizes Infineon datasheet parameters, distributor pricing, drop-in alternatives within the XMC4300 family, and application reference designs not found in the standalone manufacturer datasheet.

RFC Hubungi kami
XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256ABXQMA1

XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4400F64F256ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 256 KB of embedded flash and an Ethernet MAC, housed in a 64-pin LQFP package with an exposed pad. It is designed for industrial embedded systems requiring deterministic real-time control, high-speed serial connectivity, and integrated Ethernet communication. The device operates from a 3.3 V supply according to its ordering designation. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. Within the product hierarchy, the XMC4400 is an ARM Cortex-M4 MCU, an embedded processor within the XMC4000 family. It combines real-time control performance with industrial peripherals, allowing one device to supervise sensors, execute control algorithms, and exchange data through Ethernet or serial interfaces. The principal features visible in the ordering information include a 120 MHz Cortex-M4 core, 256 KB of flash memory, a 3.3 V operating supply, and an Ethernet MAC. The 32-bit RISC architecture supports compact, efficient embedded software, while the integrated Ethernet MAC provides a dedicated path for network-connected industrial equipment. The LQFP-64 exposed-pad package also provides a substantial underside thermal and ground connection for designs requiring improved electrical and thermal performance. The XMC4400F64F256ABXQMA1 belongs to the industrial XMC4000 product class, making it suitable for control platforms that require both deterministic operation and communications. The 256 KB flash capacity supports embedded boot code, configuration data, and application firmware in a single-controller design. Its 120 MHz operating rate provides additional timing margin for protocol processing, digital signal handling, and supervisory control tasks. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, connected sensor gateways, industrial communication equipment, and embedded measurement systems. In these systems, the MCU can execute real-time control loops while the Ethernet MAC manages networked communication without requiring a separate network controller. PCB implementation requires correct assignment of the 3.3 V supply, decoupling, clock, reset, debug, and communication signals according to the manufacturer pin-description table. The exposed pad should be connected to the intended ground plane and thermally sized for the final board stack-up. Firmware should also validate operating limits, peripheral clock configurations, and Ethernet physical-layer requirements before field deployment. This page combines the manufacturer ordering information with practical application guidance, package considerations, and a parameter-focused comparison with members of the XMC4400 family. These engineering details help designers distinguish flash-density or ordering-code changes from changes that require PCB or firmware modification.

RFC Hubungi kami
XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256BAXQMA1

XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of embedded Flash memory, and a 100-pin PG-LQFP surface-mount package. It belongs to the XMC4000 microcontroller family and combines a high-resolution PWM unit, analog and digital peripherals, and Ethernet MAC capability in one industrial control device. The orderable designation indicates an industrial temperature option and 256 KB Flash configuration. An industrial microcontroller is a semiconductor device designed to execute embedded control software under real-time operating conditions. The XMC4400 follows the hierarchy of microcontroller, embedded processor, and industrial semiconductor. Its ARM Cortex-M4 processing architecture provides a 32-bit execution environment for motor control, communications, industrial automation, and connected equipment. Unlike a general-purpose desktop processor, it is intended for deterministic control of sensors, actuators, communication links, and safety-oriented peripheral functions. The verified manufacturer information identifies an operating frequency of up to 120 MHz, 256 KB of Flash, and an Ethernet MAC as principal device attributes. The XMC4400 also incorporates Infineon's high-resolution PWM capability, whose published resolution reaches 150 ps. These features support applications that benefit from precise timing, fast control-loop execution, and deterministic peripheral interaction without requiring a separate high-resolution PWM device. Technical implementation uses the ARM Cortex-M4 core within the XMC4000 architecture and integrates memory, communications, timing, analog, and debugging resources into a single device. Flash provides 256 KB for firmware and application code, while SRAM requirements and other memory details remain dependent on the complete ordering designation and datasheet tables. The PG-LQFP-100 package is a 100-pin plastic surface-mount package suited to multilayer industrial control boards where a fine-pitch leaded package is preferred over a ball-grid array. Typical uses include industrial Ethernet equipment, motor and power conversion controllers, factory automation nodes, building automation interfaces, and embedded communication platforms. For networking products, the integrated Ethernet MAC reduces the need for external media-access control, although a suitable Ethernet PHY and magnetic interface are still required. For motor control, the high-resolution PWM unit supports precise edge placement and timing while the 120 MHz Cortex-M4 core handles supervisory control and communications tasks. Designers should preserve the pin assignments and power conditions defined for the PG-LQFP-100 ordering designation, use the manufacturer's recommended decoupling and clock configuration, and verify Ethernet transceiver requirements before layout. Software validation should include clock-tree, reset, startup, and peripheral-instance verification. PCB thermal and signal-integrity reviews are essential when high-speed communication, switching outputs, or adjacent sensitive analog circuitry share the board. This product record consolidates verified manufacturer and distributor information, pin-package identification, pricing status, application guidance, and transparent engineering comparisons. It also distinguishes verified facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers accelerate sourcing without presenting unverified electrical limits as design guarantees.

RFC Hubungi kami
XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512ABXQMA1

XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512ABXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and Ethernet MAC capability, in a 64-pin PG-LQFP surface-mount package. It belongs to the XMC4000 family and combines a Cortex-M4 processor core with embedded DSP instructions, flash memory, Ethernet connectivity, and industrial-oriented peripherals. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the product hierarchy, the XMC4400F64F512ABXQMA1 is an Arm Cortex-M4 microcontroller, part of the XMC4000 family, and an industrial embedded-control IC. This combination makes it appropriate for compact control systems that require deterministic real-time execution alongside an Ethernet-capable communications architecture. The principal device characteristics include a 120 MHz CPU frequency, 512 KB of flash organized as 512K × 8, 32-bit processing, and a 64-pin PG-LQFP package. The industrial ordering designation XMC4400-F64F512-BA identifies the XMC4400, 120 MHz core, 512 KB flash configuration, and industrial grade. The Arm Cortex-M4 core includes a built-in DSP instruction set, supporting efficient fixed-point signal-processing operations without requiring a separate DSP in suitable control systems. Ethernet MAC capability differentiates this device from basic general-purpose microcontrollers and makes it relevant to industrial networking, connected automation, and embedded communications equipment. The exact peripheral mix, RAM configuration, electrical limits, and pin functions must be confirmed in the XMC4400 manufacturer datasheet before schematic capture or firmware deployment. The XMC4000 family documentation also covers derivative-specific ordering information, electrical characteristics, package details, and errata. Typical applications include industrial Ethernet controllers, motor-control platforms, factory automation nodes, CAN-connected equipment, embedded gateways, and real-time sensor-processing systems. In these designs, the 120 MHz Cortex-M4 core executes control logic while the DSP instruction set accelerates suitable filtering, signal transformation, and modulation workloads. The 512 KB flash capacity provides room for an embedded application, protocol stacks, configuration data, and boot code within a single device. PCB design should account for the 64-pin LQFP footprint, exposed thermal and routing requirements, power-supply decoupling, Ethernet signal integrity, and programming access. Firmware projects should verify startup behavior, interrupt-vector configuration, peripheral availability, and pin multiplexing against the exact ordering code. A hardware redesign should not be attempted unless the alternative device has the same package, pinout, power architecture, peripheral mapping, and software-support requirements. This product summary combines the manufacturer ordering information, distributor identification, datasheet references, and engineering guidance for XMC4400F64F512ABXQMA1. It also highlights practical selection, comparison, application, and sourcing questions that help engineers determine whether the 120 MHz Cortex-M4 architecture and 512 KB flash configuration match the intended industrial embedded design.

RFC Hubungi kami
XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512BAXQMA1

XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller rated at 120 MHz, with 512 KB of flash memory and a 64-pin TQFP exposed-pad package. It is a 3.3 V industrial member of the XMC4000 family that combines a floating-point and DSP-capable processor core with Ethernet MAC, CAN, high-resolution PWM, and other industrial peripherals. An MCU is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one die. The ARM Cortex-M4 is a 32-bit processor architecture within the broader microcontroller and embedded-semiconductor hierarchy. It supports real-time control tasks that require deterministic peripheral access, while the XMC family adds Ethernet and CAN connectivity commonly used in industrial automation, networking, motor-control, and communications equipment. Key verified features include a 120 MHz operating frequency, 512 KB of flash, and a 64-pin PG-TQFP-64-19 surface-mount package. The device also includes a 150 ps high-resolution PWM capability, an Ethernet MAC, CAN interfaces, an FPU, DSP instructions, and a common-ground architecture. In packages with an exposed die pad, Infineon requires the pad to be connected to the common ground alongside the VSS, VSSA, and VSSO pins. The Cortex-M4 architecture is suitable for floating-point control algorithms and fixed-point signal processing, while the XMC peripheral set reduces the need for external interface devices. Ethernet MAC support can simplify industrial Ethernet connectivity, and CAN provides a robust option for distributed automation and vehicle or industrial control networks. The high-resolution PWM unit is especially relevant to precise timing, digital-to-analog conversion, and motor-control applications. Typical uses include industrial Ethernet controllers, factory automation nodes, CAN-connected motor systems, power-conversion equipment, and embedded communications platforms. At 120 MHz, the MCU has sufficient processing capacity for protocol handling and real-time control, but designers should evaluate interrupt latency, peripheral timing, memory bandwidth, and thermal conditions for each system. The exposed pad requires careful PCB layout and an adequate ground plane. The package must be soldered according to Infineon's land-pattern and reflow guidance, while the exposed die pad and all ground pins must be tied to the common ground. The 150 ps PWM resolution should also be checked against the timer clock and required output timing rather than treated as a universal system timing guarantee. This page consolidates verified distributor and manufacturer information, package characteristics, functional applications, and cross-reference candidates. The available data identifies only a limited number of same-package alternatives; their temperature-grade, ordering-code, and detailed electrical differences should be confirmed against the Infineon ordering information before production substitution.

RFC Hubungi kami
XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256ABXQSA1

XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller with a 120 MHz operating frequency, 256 KB of flash memory, 80 KB of RAM, and a 3.3 V supply in a 64-pin PG-LQFP package with an exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller control with a high-performance 32-bit processor core. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and GPIO into one device. The XMC4400F64K256ABXQSA1 sits within the hierarchy of embedded controller, 32-bit microcontroller, ARM Cortex-M4 microcontroller, and single-chip control IC. It is intended for systems that need more computing capability and memory than a basic 8-bit or 16-bit controller without moving to a complex application processor. Principal features include a 120 MHz ARM Cortex-M4 core, 256 KB of flash program memory, 80 KB of SRAM, and operation from a 3.3 V supply. The 64-pin LQFP package exposes a practical mix of digital I/O and embedded peripherals while providing an exposed thermal pad for improved heat spreading on multilayer PCBs. The automotive-grade ordering designation indicates suitability for demanding industrial or automotive control environments when the full ordering information and qualification requirements are confirmed for the assembled system. Technically, the Cortex-M4 architecture supports efficient real-time control through its instruction set, interrupt handling, and integrated peripherals. This makes the device appropriate for deterministic control loops that combine sensor acquisition, communications, and actuator timing. Its 256 KB flash provides room for application code, configuration data, and boot logic, while the 80 KB SRAM supports working state, buffers, stacks, and peripheral data movement without relying on external memory in many designs. Typical applications include industrial motor and motion control, automotive body and auxiliary control, robotics, building automation, embedded instrumentation, and connected industrial equipment. In each case, the processor can execute control logic while dedicated peripherals handle communication, timing, and digital input or output. A design using the XMC4400F64K256ABXQSA1 should confirm pin multiplexing, peripheral availability, clock configuration, and startup requirements against the manufacturer datasheet. PCB implementation should preserve the electrical and thermal requirements associated with the exposed-pad LQFP. Place the device according to the package land pattern, connect the exposed pad to the appropriate ground plane, provide the specified decoupling capacitors, and route high-speed or sensitive signals away from noisy power-conversion stages. Automotive and safety-related designs also require a complete review of the ordering code, temperature grade, errata, and applicable qualification documentation. This page consolidates the verified XMC4400F64K256ABXQSA1 specifications, sourcing information, replacement analysis, and practical implementation guidance. It helps engineers evaluate the device against the XMC4000 series and identify whether a PCB, firmware, or qualification change is required before selecting a replacement.

RFC Hubungi kami
XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256BAXQMA1

XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256BAXQMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller with a 120 MHz maximum clock, 256 KB of flash memory, 80 KB of SRAM, and a 64-pin PG-LQFP-64-19 package. The ordering code identifies the 256 KB flash configuration, 256 KB-class memory organization, industrial qualification, 3.3 V supply, and tray packaging. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The XMC4400 belongs to the XMC4000 family of 32-bit Arm Cortex-M4 microcontrollers, combining real-time control capability with Ethernet communications and a high-resolution PWM architecture. Its memory hierarchy supports connected industrial equipment, distributed control nodes, and compact embedded automation systems. Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB flash, 80 KB SRAM, 10/100 Ethernet, and a high-resolution PWM unit with 150 ps resolution. The 64-pin LQFP package provides a practical surface-mount form factor for industrial controller designs. A 3.3 V operating supply and single-core 32-bit architecture simplify system integration while supporting deterministic control and communication workloads. The XMC4400 architecture uses an Arm Cortex-M4 processor with integrated digital signal processing capabilities. Its high-resolution PWM unit supports accurate timing, motor-drive modulation, and power conversion control, while the Ethernet interface enables network-connected industrial equipment. The manufacturer describes the device as an industrial MCU and identifies the XMC4400-F64K256-BA as having 256 KB flash, 80 KB SRAM, and 10/100 Ethernet capability. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, power-conversion controllers, sensor-hub platforms, and embedded network gateways. Its combination of real-time processing, Ethernet connectivity, and precise PWM timing makes it appropriate for machinery that must execute control algorithms while exchanging data with supervisory systems. Designers should treat all 64 package pins as electrically significant and follow the complete pin-description and package information in the manufacturer datasheet. For mixed-signal or high-speed Ethernet layouts, preserve the recommended separation, grounding, and decoupling arrangement. Firmware validation should also include startup behavior, Ethernet timing, peripheral pin multiplexing, and worst-case operating conditions. This product page combines the manufacturer's electrical and ordering information with practical integration guidance, application fit, package details, and like-for-like replacements. It is intended to help engineers assess the XMC4400F64K256BAXQMA1 against other XMC4400 memory configurations without overlooking firmware, pin-multiplexing, and qualification differences.

RFC Hubungi kami
XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512ABXQSA1

XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K512ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 64-pin PG-LQFP-19 package with an exposed pad. The device belongs to the XMC4000 family and supports a 3.3 V operating voltage. Its combination of a Cortex-M4 core, substantial embedded flash, Ethernet MAC capability, and a 64-pin industrial package makes it suitable for connected industrial automation, communications, and real-time control systems. A microcontroller such as the XMC4400F64K512ABXQSA1 integrates a processor core, embedded nonvolatile program memory, SRAM, peripherals, and communication interfaces into one semiconductor package. Within the device hierarchy, it is an Arm Cortex-M4 MCU, a 32-bit microcontroller and embedded processor. The XMC4000 family combines deterministic real-time control with Ethernet-oriented connectivity, allowing one device to manage machine control tasks and networked communication functions. The key specifications are a 120 MHz maximum CPU frequency, 512 KB of flash organized as 512K × 8 bits, and a 64-pin PG-LQFP-19 package. Infineon identifies the related XMC4400-F64K512-BA ordering designation as an industrial Arm Cortex-M4 MCU with Ethernet MAC. The suffix used for the complete ordering code also identifies the package, temperature class, and other ordering options, so engineers should preserve the full MPN when procuring or redesigning a PCB. The Cortex-M4 architecture uses the ARM instruction set and is suitable for interrupt-driven embedded workloads. Its 120 MHz operating point provides substantially more processing headroom than lower-frequency general-purpose MCUs, while 512 KB of flash permits larger application code, boot code, communication stacks, and field-update routines on the same die. Peripheral details, clock configurations, memory sizes beyond flash, and electrical limits must be confirmed in the XMC4400 manufacturer datasheet and its derivative-device ordering information. Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensors, motor-control supervisory systems, and industrial communications gateways. The Ethernet MAC makes the MCU particularly relevant where local control and network connectivity must share one platform. It can also support secure serial or fieldbus communication designs when the appropriate peripherals and external transceivers are used, although the exact interface mix for this derivative must be checked in the device documentation. PCB design should preserve the exposed-pad connection specified for the PG-LQFP-19 package and follow the manufacturer’s land-pattern and thermal-land guidance. The 120 MHz processing capability requires careful clock, decoupling, and signal-integrity planning, while the Ethernet interface demands controlled routing and appropriate external network components. Do not assume that an MCU with the same package is electrically interchangeable; validate supply limits, peripheral mapping, pin multiplexing, boot behavior, and software-device configuration before substitution. This product record combines the manufacturer ordering information, family datasheet characteristics, package details, lifecycle indication, and practical design guidance. It also distinguishes true drop-in replacements from merely similar controllers, helping engineers assess PCB reuse, firmware impact, sourcing status, and qualification requirements without treating package similarity as proof of compatibility.

RFC Hubungi kami
XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512BAXQMA1

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 80 KB of RAM, and an Ethernet MAC, all housed in a 64-pin LQFP package. The XMC4400 combines a high-performance microcontroller core with advanced motor-control peripherals, including a high-resolution PWM unit capable of 150 ps resolution. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor in the microcontroller family, where the Arm Cortex-M core sits between a general-purpose microprocessor and a highly integrated embedded control device. The XMC4400 belongs to Infineon's XMC4000 industrial microcontroller family, combining real-time digital control with communication and analog-adjacent peripheral functions on one integrated circuit. Key device features include a 120 MHz Cortex-M4 core, 512 KB of program flash, 80 KB of RAM, an integrated Ethernet MAC, and a 64-pin PG-LQFP package. The 150 ps high-resolution PWM capability supports precision timing in motor-control and power-conversion systems. The combination of Ethernet connectivity and deterministic control peripherals makes the device suitable for industrial automation, networking, and embedded motor-control designs. Technically, the XMC4400 integrates an ARM Cortex-M4 processor with Infineon's peripheral set. Its high-resolution PWM and advanced timer architecture are intended to reduce the need for external timing and signal-generation components. The Ethernet MAC supports network-oriented industrial equipment, while the flash and RAM capacities provide sufficient space for control firmware, communication stacks, and application logic. Typical applications include industrial Ethernet controllers, servo and motor drives, programmable logic controllers, industrial communication modules, and embedded automation equipment. The 120 MHz processing rate supports responsive control loops, while the Ethernet MAC provides a path to connected factory networks. System designers must still verify peripheral assignments, package dimensions, pin multiplexing, and operating limits against the complete manufacturer datasheet before schematic release. A primary design consideration is firmware and peripheral planning. Because the LQFP-64 package exposes a finite number of pins, pin multiplexing, analog functions, debug access, clock configuration, and Ethernet connectivity must be assigned early. PCB designers should also follow the manufacturer's recommended decoupling, exposed-pad, and high-speed layout guidance before a new board is fabricated. This product data combines the verified manufacturer and distributor information with practical comparison notes and engineering guidance that are not presented as a substitute for the complete Infineon XMC4400 datasheet. Exact electrical characteristics, pricing, lead time, lifecycle status, and package details should be confirmed against the latest manufacturer documentation and distributor records.

RFC Hubungi kami
XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU
XMC4402F64F256ABXQMA1

XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU

The Infineon XMC4402F64F256ABXQMA1 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a 64-pin PG-LQFP-64-19 package with an exposed pad. It belongs to the Infineon XMC4000 series for industrial applications and combines real-time microcontroller control with an integrated Ethernet interface. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the product hierarchy, this device is an ARM Cortex-M4 microcontroller, an embedded processor, an integrated circuit, and ultimately a semiconductor. The XMC4000 family is designed for industrial control systems where deterministic execution, Ethernet connectivity, and a relatively large embedded memory footprint are more important than the power density of a small sensor node. Three headline characteristics define this part. The 120 MHz Cortex-M4 core provides 32-bit processing with integrated floating-point instruction support. The 256 kByte program flash supplies room for a bootloader, application firmware, and network configuration, while 80 kByte of SRAM supports working buffers, protocol stacks, and control data. The integrated 10/100 Ethernet interface allows the controller to participate directly in industrial Ethernet networks without a separate interface controller. The XMC4402F64F256ABXQMA1 is identified as an industrial-grade XMC4000-series member. Its PG-LQFP-64-19 mechanical format provides 64 leads plus a thermal exposed pad, offering a larger pin count than small-outline packages and practical access to mixed-signal, communications, and digital I/O resources. The verified distributor listing confirms single-core operation, 120 MHz clocking, 256 kByte flash, and 3.3 V supply information. Additional detailed timing, peripheral, and absolute-maximum parameters must be confirmed in the manufacturer datasheet before a new design is released. Typical applications include industrial Ethernet controllers, programmable logic controllers and automation equipment, networked motor and process controllers, industrial communication gateways, and embedded test systems. For Ethernet-connected control equipment, the combination of Cortex-M4 processing, 80 kByte SRAM, and integrated 10/100 Ethernet reduces the external component count compared with a discrete Ethernet-interface architecture. Engineers should still budget memory margin for the selected protocol stack and application firmware. The most important design consideration is thermal management around the exposed pad. The LQFP package requires a land pattern that connects the thermal pad to a properly sized ground or thermal copper plane; a datasheet-based thermal design should verify the junction and ambient temperature limits under the maximum operating clock and Ethernet activity. The 3.3 V operating point should also be checked against every attached peripheral, level-shifting interface, and supply tolerance. This page combines the verified Infineon and distributor specifications with practical selection guidance, pin-package details, application analysis, and same-package replacement information that is not normally consolidated on a distributor listing. It distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the XMC4402F64F256ABXQMA1 efficiently without treating unverified generic MCU specifications as fact.

RFC Hubungi kami
XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64F256BAXQMA1

XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4402F64F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a PG-LQFP-100-25 package. It combines a high-performance 32-bit processor core with an Ethernet interface, high-resolution PWM, and an extensive peripheral set for industrial control applications. An industrial microcontroller is a semiconductor device designed to execute embedded control logic, communicate with external equipment, and operate reliably in industrial environments. The XMC4000 family combines the Arm Cortex-M4 processor architecture with Ethernet, timers, analog and digital interfaces, and embedded flash and SRAM. This places it within the hierarchy of embedded processor, microcontroller, industrial control IC, and semiconductor. The XMC4402F64F256BAXQMA1 provides 256 kByte of flash for program storage and 80 kByte of SRAM for working memory. Its processor operates at up to 120 MHz, while the high-resolution PWM unit offers 150 ps resolution for precision timing and motor-control tasks. Integrated 10/100 Ethernet support reduces the component count required for network-connected industrial equipment. The Arm Cortex-M4 architecture supports efficient real-time control while retaining a broad embedded software ecosystem. Peripheral resources such as high-resolution PWM, communication interfaces, and Ethernet position the device for motor control, industrial networking, automation controllers, and connected embedded systems. The 150 ps PWM resolution is particularly useful when the application depends on accurate edge positioning rather than only a conventional timer period. Typical uses include EtherCAT or Ethernet-based factory automation equipment, servo and motor-control systems, industrial communication gateways, programmable logic controllers, and networked sensor-control modules. For designs requiring a 3.3 V operating rail, the device can support a compact controller architecture while combining local real-time processing with Ethernet connectivity. Designers should follow the manufacturer’s pin, power, decoupling, clock, and exposed-pad guidance when laying out the PG-LQFP-100-25 package. The exposed thermal pad requires a properly designed land pattern and thermal-via arrangement if heat must be removed from the device. Firmware should also validate the selected clock, Ethernet physical interface, and peripheral pin multiplexing before production release. This product record combines the manufacturer’s XMC4402-F64F256-BA characteristics with orderable MPN context, useful application guidance, and explicit design cautions. It helps engineers distinguish confirmed memory, connectivity, package, and timing attributes from details that must be checked in the manufacturer datasheet before schematic or PCB signoff.

RFC Hubungi kami
XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256ABXQSA1

XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256ABXQSA1 is a 32-bit single-core Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of programmable Flash memory and a 64-pin PG-LQFP-19 package with exposed pad. It belongs to the XMC4000 industrial microcontroller family and includes an Ethernet MAC rated for 10/100 communication. The 256K × 8 Flash organization provides dedicated code and data storage for connected industrial-control equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7-E architecture. Microcontrollers integrate a processor core, Flash memory, SRAM, interrupt control, timers, communication peripherals, and general-purpose I/O into one device. Within the semiconductor hierarchy, this MCU belongs to the embedded-microcontroller category and provides a compact platform for industrial automation, networking, motor control, and real-time control systems. The principal device characteristics visible in manufacturer and distributor records include a 120 MHz Cortex-M4 core, 256 KB Flash memory, 32-bit architecture, single-core operation, and a 64-pin LQFP package. The Ethernet capability makes the device suitable for connecting embedded equipment to 10/100 networks. Its package also includes an exposed thermal pad intended to improve heat transfer from the device to the PCB. The XMC4000 architecture combines real-time control capability with Ethernet connectivity. A 120 MHz Cortex-M4 core can execute control logic and communication tasks, while integrated peripherals reduce the need for discrete interface components. Designers should consult the XMC4402 datasheet and device pin-description tables for the exact peripheral mix, RAM configuration, I/O assignments, electrical limits, clock requirements, and package dimensions before finalizing a PCB. Typical uses include industrial Ethernet controllers, factory automation nodes, building automation equipment, networked sensors, motor-control systems, and communications gateways. These applications benefit from the combination of embedded Flash, a high-frequency 32-bit core, and 10/100 Ethernet MAC support. Exact protocol availability and performance should be confirmed against the selected order code and its manufacturer documentation. PCB implementation requires careful decoupling, a correctly configured clock network, and unobstructed thermal coupling to the exposed pad. Follow the manufacturer reference layout, place required capacitors close to their supply pins, route high-speed signals according to the recommended guidelines, and verify the assembled design across voltage and temperature limits. This page combines manufacturer identification, distributor specifications, strict package-aware substitution guidance, application analysis, and practical design notes. It is intended to help engineers evaluate the XMC4402F64K256ABXQSA1 for an existing 64-LQFP industrial design before obtaining detailed electrical and pin-level documentation.

RFC Hubungi kami
XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256BAXQMA1

XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz core, 256 KB of flash memory, and a 64-pin LQFP package. The XMC4000-series device combines real-time control capability with an integrated 10/100 Ethernet MAC, high-resolution PWM, and an extended peripheral set for industrial automation, networking, motor-control, and embedded communications systems. A microcontroller is a compact semiconductor system that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one package. The ARM Cortex-M4 architecture belongs to the microcontroller class and provides deterministic instruction execution, DSP-oriented instructions, and hardware floating-point support. The XMC4400 family extends this foundation with Infineon peripherals designed for industrial real-time control and connected equipment. The XMC4402F64K256BAXQMA1 operates at 120 MHz and provides 256 KB of flash organized as 256K x 8. Its high-resolution PWM unit offers a stated resolution of 150 ps, supporting precise timing-sensitive power conversion and motor-control systems. The integrated Ethernet MAC adds 10/100 communications capability without requiring a separate interface controller. The device is identified as an industrial-grade member of the XMC4400 family. The XMC4400 architecture integrates multiple peripheral domains suited to deterministic embedded control. Its communication and timing resources can support industrial Ethernet, while the high-resolution PWM and fast-control peripherals reduce reliance on software timing loops. The 256 KB embedded flash provides room for bootloader, application, and configuration code, while the Cortex-M4 processor supports efficient signal-processing and control workloads. Typical uses include industrial PLC peripheral modules, factory automation controllers, Ethernet-connected data acquisition equipment, variable-frequency motor drives, power-conversion controllers, building automation nodes, and real-time communication gateways. For designs requiring a deterministic Ethernet connection, the integrated 10/100 Ethernet MAC can be paired with a suitable Ethernet transceiver and magnetic interface. Designers should verify the complete pin-level electrical configuration, exposed-pad connection, clock requirements, memory organization, and peripheral multiplexing against the official Infineon documentation before layout release. The LQFP-64 land pattern must follow the manufacturer package drawing, and decoupling should be placed close to the supply pins. Firmware should also validate reset, clock, Ethernet PHY, and startup sequencing for the selected board design. This page combines verified manufacturer and distributor information with an honest engineering comparison, practical integration guidance, and clearly identified data gaps. It distinguishes confirmed XMC4400-family capabilities from unverified details so procurement and hardware teams can evaluate the MCU without relying on invented specifications or unsafe replacement assumptions.

RFC Hubungi kami
XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

RFC Hubungi kami
XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon
XMC4500-F144K1024

XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon

The Infineon XMC4500-F144K1024 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, combining a 120 MHz processor core with 1024 kByte of embedded flash and 160 kByte of SRAM in a 144-pin PG-LQFP package. Industrial connectivity microcontrollers such as the XMC4500 sit between general-purpose embedded processors and highly specialized control devices. They combine an Arm Cortex-M4 instruction set with configurable peripherals for communications, timing, analog conversion, and industrial control, allowing one controller to supervise power conversion, sensing, fieldbus communication, and safety-related monitoring functions. The XMC4500 integrates Ethernet connectivity alongside the XMC4000 peripheral family, and its 1024 kByte of flash supports larger protocol stacks, application firmware, and field-upgrade capability than smaller 32-bit microcontrollers. The 160 kByte of SRAM provides working memory for packet buffers, control loops, and communication tasks. The 144-pin PG-LQFP-18 package provides a substantial peripheral count and power-management connectivity for industrial control boards. According to the manufacturer datasheet, the XMC4500 series targets industrial connectivity, industrial control, power conversion, and sense-and-control systems. Its configurable peripheral set allows designers to tailor the controller to application requirements instead of relying on a fixed combination of unused functions. The 120 MHz Cortex-M4 core and integrated Ethernet interface make the device suitable for connected motor controllers, power-conversion equipment, and industrial automation gateways. Designers should pay attention to the exact ordering suffix, flash density, package type, and temperature-grade requirements when comparing XMC4500 variants. The verified distributor listings identify the related -AC, -AB, and -AA order codes, while the manufacturer documentation provides the authoritative electrical and ordering details. For the target suffix, confirm the package pin count, exposed-pad connections, and production availability before layout release. This page consolidates manufacturer datasheet links, distributor records, package information, and practical selection guidance for the XMC4500-F144K1024. It highlights where related XMC4500 order codes are useful references and where a PCB redesign is required, helping engineers evaluate drop-in replacement risk before committing a new design.

RFC Hubungi kami
XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

RFC Hubungi kami
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

RFC Hubungi kami
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

RFC Hubungi kami
XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
XMC4502-F100F768AB

XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4502-F100F768AB is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 kB of flash memory and an Ethernet MAC, supplied in a PG-LQFP-100-11 package. It belongs to the XMC4000 industrial microcontroller family and targets real-time embedded systems where deterministic control, networking, and peripheral integration are important. The verified product information identifies the device as an industrial ARM Cortex-M4 microcontroller; additional electrical, memory, and peripheral details must be confirmed from the manufacturer datasheet. A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications. The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration. The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation. Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release. This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation. For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.

RFC Hubungi kami
XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
XMC4502-F100K768AB

XMC4502-F100K768AB 120MHz 768KB MCU | Infineon

The Infineon XMC4502-F100K768AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 768 KB of flash memory and a PG-LQFP-100-11 package. It is designed for real-time industrial control applications requiring deterministic processing, Ethernet connectivity, and a broad peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems. The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet. The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows. Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product. For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.

RFC Hubungi kami