Produk (46,000+)

STM32F407IGH6J - 168MHz Cortex-M4 MCU, 1MB Flash UFBGA-176 | STMicroelectronics
STM32F407IGH6J

STM32F407IGH6J - 168MHz Cortex-M4 MCU, 1MB Flash UFBGA-176 | STMicroelectronics

The STMicroelectronics STM32F407IGH6J is a high-performance ARM Cortex-M4 microcontroller with FPU, delivering 210 DMIPS at 168 MHz, packaged in a 176+25 ball UFBGA (10x10 mm). The device integrates 1 MB of Flash memory and 192 KB of SRAM, with 4 KB of backup SRAM, and includes an ART Accelerator that enables 0-wait-state execution from Flash at full CPU speed. The 'J' suffix denotes the lead-free, industrial temperature grade (-40C to +85C) variant. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for embedded applications that require deterministic real-time performance, DSP capabilities, and energy efficiency. Within ST's portfolio, the M4 sits between the Cortex-M3 (general-purpose MCU) and Cortex-M7 (higher-performance DSP+MCU); it adds a single-precision floating-point unit and DSP instructions while retaining the low interrupt latency and ease of programming of the M3. STM32F4 devices sit in the 'high-performance' tier of the STM32 family, above F1/F0/F3 'mainstream' parts and below F7/H7 'very-high-performance' parts. Key features include a 168 MHz CPU with FPU, 1 MB Flash, 192 KB SRAM (plus 4 KB backup SRAM), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB OTG HS and FS, 10/100 Ethernet MAC, CAN 2.0B, SDIO, FSMC, Crypto/hash processor, and IEEE 1588v2 hardware MAC. The ART Accelerator, combined with a multi-AHB bus matrix, sustains 168 MHz execution even with simultaneous peripheral DMA traffic. Typical applications include industrial motor drives, PLCs, industrial networking gateways, USB/Ethernet-connected HMIs, and audio processing. The hardware FPU makes it well-suited to digital signal filtering and control loops. Multiple 12-bit ADCs and rich communication peripherals (UART/SPI/I2C/CAN/USB/Ethernet) make it a versatile 'system on a chip' for connected industrial nodes. Ensure PCB layout places the UFBGA-176 decoupling capacitors as close to the package balls as possible, since the fine-pitch BGA package requires 4-6 layer PCBs with microvias. For Ethernet applications, the integrated MAC requires an external PHY and 49.9 ohm 1% termination resistors on each differential pair. Always confirm the 'J' industrial temperature range matches your thermal envelope, as commercial ('6') and extended-industrial ('7') variants differ.

RFC Hubungi kami
STM32F407IGH6TR - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics (Tape & Reel)
STM32F407IGH6TR

STM32F407IGH6TR - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F407IGH6TR is an ARM Cortex-M4 32-bit microcontroller with a maximum operating frequency of 168 MHz, 1 MB of Flash memory, and up to 192 KB of SRAM in a 176-ball UFBGA package. The STM32F407 family combines real-time signal-processing capability with extensive connectivity and peripheral integration for embedded control designs. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32F4 series belongs to the MCU hierarchy and uses the ARM Cortex-M4 core with floating-point and DSP capabilities. Its architecture is suited to industrial, communications, consumer, and embedded-control systems where deterministic control and multiple peripheral functions are required. Key verified features include an ARM Cortex-M4 processor, 168 MHz maximum frequency, 1 MB Flash, and 192 KB SRAM. The manufacturer family information also identifies an FPU, ART Accelerator, memory protection unit, DSP instructions, and up to 210 DMIPS. These features support responsive control loops, signal processing, and code execution from Flash memory. The STM32F407IGH6TR is designed for applications requiring a high-performance 32-bit MCU and substantial embedded memory. Its integrated MCU architecture can consolidate control logic and peripheral functions while reducing the number of discrete components in a design. Exact peripheral counts, voltage limits, temperature ranges, and package pin assignments should be confirmed against the manufacturer datasheet for the selected variant. Typical applications include industrial automation, communications equipment, audio and signal-processing systems, motor-control platforms, and connected embedded devices. The 1 MB Flash capacity provides room for larger firmware, while the 192 KB SRAM supports buffering and real-time workloads. The 168 MHz operating frequency provides additional processing headroom for multitasking and control algorithms. When designing a board around the STM32F407IGH6TR, verify power sequencing, decoupling, clock configuration, exposed-pad or thermal requirements, and the exact UFBGA land pattern before layout release. Because this is a high-pin-count ball-grid package, careful BGA routing, via-in-pad strategy, and assembly process selection are important. Do not infer pin compatibility from the family name alone; use the manufacturer pinout and package drawing. This page summarizes verified distributor and manufacturer information, including the Cortex-M4 core, 168 MHz frequency, 1 MB Flash, 192 KB SRAM, UFBGA package information, pricing references, and application guidance. It is intended to support component identification, engineering selection, and informed sourcing of the STM32F407IGH6TR.

RFC Hubungi kami
STM32F407IGH7 - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F407IGH7

STM32F407IGH7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407IGH7 is a 32-bit Arm Cortex-M4 microcontroller with a 168 MHz maximum CPU frequency, 1 MB of Flash memory, and a 176-ball plus 25-ball UFBGA package measuring 10 mm by 10 mm. It combines the Cortex-M4 processor with floating-point capability, extensive connectivity, and substantial embedded memory for demanding control and communications systems. The verified distributor listing identifies the device as an STM32F4-series MCU with a 1 M x 8 Flash organization. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the embedded-computing hierarchy, this device combines an Arm Cortex-M4 core, STM32F4 performance peripherals, embedded Flash and RAM, and industrial connectivity functions. Its 168 MHz operating point supports real-time control workloads, while the integrated networking and communications peripherals reduce the need for external interface devices. Key verified features include the 32-bit Arm Cortex-M4 core, operation up to 168 MHz, 1 MB Flash, and the stated 210 DMIPS performance class in the retrieved family documentation. The family description also identifies an adaptive real-time accelerator, a memory protection unit, DSP capability, three ADCs, 17 timers, USB, Ethernet, and multiple communication interfaces. These features position the part for networked gateways, industrial equipment, motor-control systems, data acquisition, and embedded audio applications. The device uses a compact 176+25 UFBGA package, making board-layout and assembly planning more demanding than a leaded package. Its dense ball array requires careful PCB escape routing, controlled power distribution, and inspection during manufacture. Verify the exact pin allocation, exposed-ball functions, electrical limits, and package drawing from the manufacturer datasheet before layout or a replacement decision. Typical designs use the MCU as the central controller for Ethernet-connected equipment, sensor aggregation, motor control, USB peripherals, camera or image-related control, and industrial automation. The 168 MHz core is useful when the control loop or communications workload exceeds the requirements of a simpler microcontroller, while the 1 MB Flash capacity provides room for application code and data. Interface count and memory availability should still be checked against the exact ordering code. A key design consideration is that a pin-compatible-looking alternative is not automatically a drop-in replacement. Confirm the BGA ball map, power pins, peripheral mapping, clock configuration, memory organization, and package drawing. Also account for software compatibility, peripheral differences, and any changes in electrical characteristics. This page consolidates verified distributor specifications, a strict data-authenticity assessment, practical application guidance, and drop-in alternative qualification. The exact electrical limits, pin map, lifecycle details, pricing tiers, and regulatory declarations are explicitly marked when the supplied evidence does not establish them.

RFC Hubungi kami
STM32F407IGT6 - 168MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics
STM32F407IGT6

STM32F407IGT6 - 168MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F407IGT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, 1MB of Flash, and 192KB of SRAM, housed in a 176-pin LQFP package. It operates at a maximum 168MHz clock with 210 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) performance and integrates DSP instructions plus a single-precision floating-point unit. The device includes an Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash, plus a memory protection unit (MPU). An LQFP, or Low-Profile Quad Flat Pack, is a surface-mount IC package with gull-wing leads on all four sides, optimized for high pin density. Microcontrollers (MCUs) like the STM32F407IGT6 belong to the embedded controller family within the broader semiconductor taxonomy: MCU -> microcontroller -> embedded processor -> integrated circuit. These devices combine a CPU core, memory, and peripherals on a single die, enabling standalone embedded systems in industrial, consumer, and automotive products. Key features of the STM32F407IGT6 include three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, 17 timers, USB OTG HS and FS, an Ethernet MAC with IEEE 1588 support, a CAN 2.0B controller, an SDMMC interface for SD cards, FSMC for external memory, a hardware crypto/hash block, and a camera interface. Up to 140 GPIO pins are exposed across the LQFP-176 footprint. Operating voltage range is 1.8V-3.6V with -40C to +85C industrial temperature range. The Cortex-M4 core with FPU accelerates single-precision math, while the ART Accelerator eliminates Flash wait-states so CPU-bound code runs at full speed. The integrated crypto/hash accelerators (AES, Triple DES, SHA, HMAC) and true random-number generator (TRNG) support secure connectivity without external ICs. The Ethernet MAC with IEEE 1588 hardware timestamping enables industrial-grade real-time networking. Typical applications include industrial motor control, PLCs and industrial gateways, building automation, medical instrumentation, point-of-sale terminals, multi-axis CNC, UAV flight controllers, and graphics-rich HMIs. The combination of high performance, large memory, and rich peripherals makes the STM32F407IGT6 a frequent choice for designs that outgrow Cortex-M3 resources. When designing with this MCU, plan the clock tree carefully because the 168MHz SYSCLK requires careful PLL configuration, and ensure your debugger supports the SWD/JTAG interface. Use the STM32CubeMX tool and the HAL/LL libraries to accelerate firmware bring-up. The 176-pin LQFP is large; routing 140+ GPIOs and the Ethernet/USB differential pairs will dominate PCB area. Plan PCB layers and stackup accordingly. This page synthesizes current distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams evaluate the STM32F407IGT6 for new designs and second-source decisions.

RFC Hubungi kami
STM32F407IGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F407IGT7

STM32F407IGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407IGT7 is a 32-bit ARM Cortex-M4 microcontroller with a floating-point unit and DSP capability, operating up to 168 MHz with 1 MB of Flash memory in a 176-pin LQFP package. It combines an ART Accelerator, memory protection features, extensive connectivity, analog conversion, timers, and camera support in one microcontroller platform. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interfaces into a single device. The STM32F4 family belongs to the embedded-processing hierarchy: Cortex-M4 MCU, 32-bit microcontroller, embedded processor, and semiconductor. This device is designed for systems that require real-time control, data acquisition, communications, and moderate processing throughput without using a separate microprocessor. The Cortex-M4 core provides 210 DMIPS in the cited STM32F407IGT7XXX material, while the ART Accelerator enables adaptive execution from Flash memory. The device includes up to 1 MB of Flash, 192 KB plus 4 KB of RAM, USB OTG HS/FS, Ethernet, 17 timers, three ADCs, and 15 communication interfaces according to the supplied datasheet search results. The package is a 176-LQFP measuring 24 mm by 24 mm. Typical applications include industrial automation, Ethernet-connected control equipment, USB peripherals, audio and communications systems, camera-based products, and embedded control platforms. The combination of high clock speed, DSP instructions, floating-point hardware, multiple timers, and flexible serial interfaces supports motor-control, industrial networking, sensor acquisition, and human-interface applications. A key design consideration is selecting the correct clock, power, decoupling, and peripheral configuration for the target PCB. The exact pinout and many electrical limits must be checked against the manufacturer datasheet before layout or firmware deployment. Do not infer missing electrical values from related STM32 variants. This product page consolidates verified distributor specifications, package information, sourcing links, and application-oriented guidance. It also distinguishes true drop-in replacement evidence from merely similar MCUs, helping engineers make package, pinout, memory, and firmware decisions with fewer assumptions.

RFC Hubungi kami
STM32F407VET6 - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST
STM32F407VET6

STM32F407VET6 - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST

The STMicroelectronics STM32F407VET6 is a high-performance ARM Cortex-M4 32-bit RISC microcontroller operating at up to 168 MHz with single-precision FPU and DSP instructions, integrating 512 KB on-chip program Flash and 192 KB SRAM in a 100-pin LQFP (14x14 mm) surface-mount package. What is a microcontroller? A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile working memory (SRAM), and programmable peripherals to govern specific operations in embedded systems. The STM32F407VET6 belongs to the STM32F4 series built on the ARM Cortex-M4 core with FPU, positioned within the broader hierarchy of 32-bit MCUs - microcontroller in the embedded semiconductor taxonomy used in supply chains. Key features include an on-chip 10/100 Ethernet MAC with IEEE 1588v2, USB 2.0 OTG Full-Speed and High-Speed with PHY, a digital camera interface (DCMI), three 12-bit ADCs with up to 24 channels and 2.4 MSPS, dual 12-bit DACs, an SDIO interface, FSMC for external memory, a crypto/hash peripheral, and a rich set of timers, USART, SPI, I2C, and CAN interfaces. The supply range is 1.8V to 3.6V with operation from -40C to +85C. Technically, the STM32F407VET6 uses a Harvard bus architecture with separate instruction and data buses enabling simultaneous fetch and access, an ART Accelerator with 128-bit Flash prefetch eliminating wait states from Flash, a memory protection unit (MPU), and a nested vectored interrupt controller (NVIC) supporting deterministic real-time behavior. The single-precision FPU accelerates math-intensive firmware for control loops and DSP. Typical applications include industrial motor control and PLCs, networked IoT gateways using the on-chip Ethernet MAC, USB device and host designs, and machine-vision or imaging systems using the DCMI camera interface. Design tip: decouple every VDD pin with 100 nF ceramics plus bulk capacitance, route VDDA/VSSA on a clean analog plane to minimize ADC noise, and place the HSE crystal as close as possible with proper guard rings for stable clocking. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, including LQFP-100 same-footprint cross references and companion MPNs for reference designs.

USD $3.61 Dalam Stok
STM32F407VET6TR - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST (Tape & Reel)
STM32F407VET6TR

STM32F407VET6TR - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST (Tape & Reel)

The STMicroelectronics STM32F407VET6TR is a high-performance ARM Cortex-M4 32-bit RISC microcontroller operating at up to 168 MHz with single-precision FPU and DSP instructions, integrating 512 KB on-chip program Flash and 192 KB SRAM in a 100-pin LQFP (14x14 mm) surface-mount package. What is a microcontroller? A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile working memory (SRAM), and programmable peripherals to govern specific operations in embedded systems. The STM32F407VET6TR belongs to the STM32F4 series built on the ARM Cortex-M4 core with FPU, positioned within the broader hierarchy of 32-bit MCUs - microcontroller in the embedded semiconductor taxonomy used in supply chains. Key features include an on-chip 10/100 Ethernet MAC with IEEE 1588v2, USB 2.0 OTG Full-Speed and High-Speed with PHY, a digital camera interface (DCMI), three 12-bit ADCs with up to 24 channels and 2.4 MSPS, dual 12-bit DACs, an SDIO interface, FSMC for external memory, a crypto/hash peripheral, and a rich set of timers, USART, SPI, I2C, and CAN interfaces. The supply range is 1.8V to 3.6V with operation from -40C to +85C. Technically, the STM32F407VET6TR uses a Harvard bus architecture with separate instruction and data buses enabling simultaneous fetch and access, an ART Accelerator with 128-bit Flash prefetch eliminating wait states from Flash, a memory protection unit (MPU), and a nested vectored interrupt controller (NVIC) supporting deterministic real-time behavior. The single-precision FPU accelerates math-intensive firmware for control loops and DSP. Typical applications include industrial motor control and PLCs, networked IoT gateways using the on-chip Ethernet MAC, USB device and host designs, and machine-vision or imaging systems using the DCMI camera interface. Design tip: decouple every VDD pin with 100 nF ceramics plus bulk capacitance, route VDDA/VSSA on a clean analog plane to minimize ADC noise, and place the HSE crystal as close as possible with proper guard rings for stable clocking. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, including LQFP-100 same-footprint cross references and companion MPNs for reference designs.

USD $3.45 Dalam Stok
STM32F407VGT6 - 1MB Flash, 168MHz ARM Cortex-M4 MCU | STMicroelectronics
STM32F407VGT6

STM32F407VGT6 - 1MB Flash, 168MHz ARM Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407VGT6 is a high-performance 32-bit microcontroller with an ARM Cortex-M4F core running at up to 168 MHz, integrating 1 MB of Flash memory and 192 KB of SRAM (plus 4 KB backup SRAM), housed in a 100-pin LQFP (14x14 mm) package. It delivers 210 DMIPS with single-precision FPU and DSP instructions. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable peripherals on a single chip. The STM32F407VGT6 belongs to the STM32F4 series within the broader STM32 family of ARM Cortex-M microcontrollers, positioned in the high-performance Cortex-M4 segment of the power/performance hierarchy below Cortex-M7 devices such as the STM32F7 and STM32H7. Key features include the ART Accelerator enabling 0-wait-state Flash execution, a memory protection unit (MPU), 3x 12-bit ADCs, 2x 12-bit DACs, 17 timers including two advanced motor-control timers, and a rich communication set: USART, SPI, I2C, CAN, USB OTG FS/HS, and an Ethernet MAC with IEEE 1588 support. A camera interface (DCMI) and true random number generator (RNG) round out the peripheral portfolio. Technically, the device operates from a 1.8V to 3.6V supply, with an internal 1.2V core regulator (VCAP bypass), 5V-tolerant I/O pins, and an internal 16 MHz RC oscillator plus external crystal support up to 26 MHz. It is specified from -40C to +85C (industrial grade) and is RoHS compliant. Typical applications include motor control using the advanced timers and ADCs, audio processing leveraging the FPU and DACs, and industrial automation using CAN and Ethernet. The camera interface also suits embedded vision nodes. Design tip: ensure adequate decoupling on all VDD pins, provide a clean analog supply for the ADCs, and place the 1.2V bypass capacitors close to the VCAP pins for regulator stability. This page synthesizes distributor pricing, drop-in alternatives including the GigaDevice GD32F407VGT6, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F407VGT6. Prices are as of 2026-09-06.

USD $7.55 Dalam Stok
STM32F407VGT6J - ARM Cortex-M4 MCU 168MHz 1MB Flash 100-LQFP | STMicroelectronics
STM32F407VGT6J

STM32F407VGT6J - ARM Cortex-M4 MCU 168MHz 1MB Flash 100-LQFP | STMicroelectronics

The STMicroelectronics STM32F407VGT6J is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 168 MHz and integrating 1 MB of Flash memory in a 100-pin LQFP (14x14 mm) package. It is a member of the STM32F407 performance line and includes the ART Accelerator, 192 KB of SRAM, and a rich peripheral set: USB OTG HS/FS, Ethernet MAC, three ADCs, two DACs, seventeen timers, fifteen communication interfaces, and a camera interface. The "J" suffix indicates ST's Tray packaging variant; the silicon die is identical to STM32F407VGT6. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm for embedded real-time applications. It includes a single-precision IEEE 754 floating-point unit (FPU), DSP extensions (single-cycle MAC), and a Nested Vectored Interrupt Controller (NVIC). The STM32F4 family is the highest-performance tier in ST's Cortex-M lineup, occupying a middle position between Cortex-M3 microcontrollers (cost-sensitive MCU class) and Cortex-M7 microcontrollers (highest-end MCU class) in the taxonomy: microcontroller -> 32-bit MCU -> ARM MCU -> Cortex-M4 MCU -> STM32 -> STM32F4. The chip integrates a Cortex-M4 core plus peripheral IP (DMA, ADC, USB, Ethernet, timers) on a single die. Key features include 1 MB Flash with ART Accelerator for zero-wait-state execution, 192 KB SRAM (including 4 KB backup SRAM), 1.7 V to 3.6 V operating supply, USB 2.0 OTG full-speed and high-speed with on-chip PHY, 10/100 Ethernet MAC with dedicated DMA, three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, and a true random number generator (TRNG). The flexible static memory controller (FSMC) lets designers attach external SRAM, NOR/NAND Flash, or LCD modules. Cryptographic acceleration is not present on this device (use STM32F417 for AES/HASH). For real-time control, the STM32F407VGT6J includes the ART Accelerator that pre-fetches instructions from Flash and caches them in 64-bit-wide buffers, effectively eliminating Flash wait states when running from non-sequential code. The Cortex-M4 FPU executes single-precision floating-point instructions in a single cycle, freeing the CPU from software FP emulation and enabling high-speed signal-processing workloads such as motor-control loops and audio codecs. The 17 timers (including advanced-control PWM timers) support three-phase motor drive, power-conversion feedback, and capture/compare for time-critical events. Typical applications include industrial motor drives, USB/Ethernet-connected sensor hubs, medical instrumentation, test and measurement, audio processing, and high-end consumer devices. The combination of Ethernet and USB OTG makes the part well suited to industrial gateways, while the camera interface and LCD-TFT controller support HMI panels. For automotive use, the STM32F407VGT6J is not AEC-Q100 qualified; ST designates specific AEC-Q100 variants within the family. When designing with this device, ensure 1uF decoupling on every VDD pin, expose the FSMC address bus if external memory is needed, and select the appropriate boot configuration via BOOT0/BOOT1 for production firmware upgrades. The part's 168 MHz speed places it well above Cortex-M3 parts from the same era, so most C code ports with little or no optimization beyond switching to FPU instructions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
STM32F407VGT6TR - 1MB Flash, 168MHz ARM Cortex-M4 MCU | STMicroelectronics (Tape & Reel)
STM32F407VGT6TR

STM32F407VGT6TR - 1MB Flash, 168MHz ARM Cortex-M4 MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F407VGT6TR is a high-performance 32-bit microcontroller with an ARM Cortex-M4F core running at up to 168 MHz, integrating 1 MB of Flash memory and 192 KB of SRAM (plus 4 KB backup SRAM), housed in a 100-pin LQFP (14x14 mm) package. It delivers 210 DMIPS with single-precision FPU and DSP instructions. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable peripherals on a single chip. The STM32F407VGT6TR belongs to the STM32F4 series within the broader STM32 family of ARM Cortex-M microcontrollers, positioned in the high-performance Cortex-M4 segment of the power/performance hierarchy below Cortex-M7 devices such as the STM32F7 and STM32H7. Key features include the ART Accelerator enabling 0-wait-state Flash execution, a memory protection unit (MPU), 3x 12-bit ADCs, 2x 12-bit DACs, 17 timers including two advanced motor-control timers, and a rich communication set: USART, SPI, I2C, CAN, USB OTG FS/HS, and an Ethernet MAC with IEEE 1588 support. A camera interface (DCMI) and true random number generator (RNG) round out the peripheral portfolio. Technically, the device operates from a 1.8V to 3.6V supply, with an internal 1.2V core regulator (VCAP bypass), 5V-tolerant I/O pins, and an internal 16 MHz RC oscillator plus external crystal support up to 26 MHz. It is specified from -40C to +85C (industrial grade) and is RoHS compliant. Typical applications include motor control using the advanced timers and ADCs, audio processing leveraging the FPU and DACs, and industrial automation using CAN and Ethernet. The camera interface also suits embedded vision nodes. Design tip: ensure adequate decoupling on all VDD pins, provide a clean analog supply for the ADCs, and place the 1.2V bypass capacitors close to the VCAP pins for regulator stability. This page synthesizes distributor pricing, drop-in alternatives including the GigaDevice GD32F407VGT6, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F407VGT6TR. Prices are as of 2026-09-06.

USD $7.55 Hubungi kami
STM32F407VGT7 - 168MHz Cortex-M4 1MB Flash MCU | STMicroelectronics
STM32F407VGT7

STM32F407VGT7 - 168MHz Cortex-M4 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F407VGT7 is a high-performance ARM Cortex-M4 microcontroller with FPU, delivering 168 MHz clock speed, 1 MB of Flash, and 192 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It integrates an Adaptive Real-Time (ART) Accelerator for 0-wait-state flash execution, achieving up to 210 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) and full DSP instructions. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals onto one IC. The Cortex-M4 places this part in the ARM Cortex-M family -> 32-bit microcontroller -> embedded processor -> semiconductor taxonomy. Within this hierarchy, the STM32F407 sits at the high-performance tier, distinguishing it from Cortex-M0/M0+ entry-level MCUs and Cortex-M7 higher-end parts. Its integrated FPU and DSP extensions make it suitable for signal processing workloads normally reserved for dedicated DSPs. Key features include 1 MB Flash, 192 KB SRAM (+ 4 KB backup SRAM), three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, USB OTG full-speed and high-speed, 10/100 Ethernet MAC, two CAN 2.0B interfaces, an SDIO interface, and a CMOS camera interface. The device offers up to 17 timers, 6 SPI ports, 3 I2C buses, 4 USART/UART pairs, and an external memory controller for SRAM/PSRAM/NOR/NAND memories. The crypto/hash/hash-only accelerators (AES, Hash, RNG) provide hardware security primitives for connected applications. Architecturally, the STM32F407VGT7 uses the Cortex-M4 with single-precision FPU, MPU, and an ART accelerator that prefetches and caches flash instructions, eliminating performance penalties typically seen at high clock rates. The 7-layer AHB matrix and peripheral DMA streams enable parallel data movement, ensuring deterministic throughput on simultaneous communication and ADC tasks. The 1.8 V-3.6 V core supply, with internal LDOs, allows either single-rail or battery-backed designs (VBAT for RTC and backup registers). Typical applications include industrial motor drives and PLCs, USB/Ethernet-connected IoT gateways, graphical HMI panels, medical instrumentation, audio codecs with USB streaming, drone flight controllers, and automotive body/network gateways. The combination of FPU, large SRAM, and rich peripherals makes the STM32F407VGT7 a versatile main-controller choice for mid-complexity designs. When designing with this MCU, always populate the NRST reset pin with the recommended 10 kohm pull-up and 100 nF decoupling cap, provide a 32.768 kHz crystal for RTC accuracy, and configure unused pins as analog inputs to minimize power consumption. Boot pins BOOT0/BOOT1 must be tied to known states to ensure reliable startup from Flash, System Memory, or SRAM. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison parameters, and practical design notes that complement, but are not present in, the official STMicroelectronics datasheet.

RFC Hubungi kami
STM32F407VGT7TR - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F407VGT7TR

STM32F407VGT7TR - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407VGT7TR is a 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, operating up to 168 MHz, with 1 MB Flash and 192 kB plus 4 kB RAM, in a 100-pin LQFP 14x14 mm package. It is a high-performance STM32F4-series MCU for embedded control, communications, data acquisition, and real-time systems. What is a microcontroller? A microcontroller is a semiconductor device integrating a CPU core, memory, peripherals, and communication interfaces on one integrated circuit. The STM32F407VGT7TR belongs to the ARM Cortex-M4 microcontroller hierarchy, commonly described as an embedded processor or MCU. Its ARM Cortex-M4 core includes a floating-point unit and DSP support, while the STM32F4 family combines real-time control peripherals with extensive connectivity. Key features include 168 MHz maximum operating frequency, 210 DMIPS as reported in the verified product data, 1 MB of Flash, 192 kB of SRAM plus 4 kB of additional RAM, USB OTG high-speed and full-speed support, Ethernet, 17 timers, three ADCs, and 15 communication interfaces. The device is suitable for designs requiring substantial processing performance, multiple serial interfaces, and analog measurement capability. The Cortex-M4 architecture and adaptive real-time accelerator support efficient embedded execution. The STM32F407VGT7TR is identified in distributor data as an ARM Cortex-M4 32-bit MCU with FPU, DSP capability, memory protection, USB, Ethernet, camera-related connectivity, and a maximum frequency of 168 MHz. Its 100-LQFP package exposes the high pin count needed for extensive peripheral and signal connectivity. Typical applications include industrial automation equipment, networked embedded controllers, USB-connected peripherals, motor-control systems, data-acquisition equipment, audio and communications products, and camera or image-processing modules. The integrated USB, Ethernet, ADC, timer, and communication resources can reduce the number of external components and simplify system architecture. Designers should verify the exact pin multiplexing, power-supply requirements, clock configuration, memory organization, and peripheral electrical limits against the STMicroelectronics STM32F407xx datasheet before layout. The large LQFP package requires careful fanout, signal-integrity routing, and thermal-performance planning for high-clock embedded systems. This page consolidates verified distributor specifications, datasheet access, package information, and replacement-comparison guidance to support component selection, PCB planning, and sourcing for STM32F407VGT7TR designs.

RFC Hubungi kami
STM32F407ZET6 - 32-bit ARM Cortex-M4F MCU, 512KB Flash | STMicroelectronics
STM32F407ZET6

STM32F407ZET6 - 32-bit ARM Cortex-M4F MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F407ZET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4F core with floating-point unit (FPU), operating at up to 168 MHz. It integrates 512 KB of flash memory and 192 KB of SRAM, along with a rich set of peripherals including advanced connectivity, analog, and control interfaces. The device is housed in a 144-pin LQFP package (LQFP144, 20x20 mm) and is part of the STM32F4 series, designed for demanding embedded applications requiring high computational throughput and low power consumption. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic products, from automotive engine control units to industrial automation systems, consumer electronics, and IoT devices. The STM32F407ZET6 belongs to the STM32F4 family, which is part of the broader STM32 32-bit ARM Cortex-M microcontroller portfolio from STMicroelectronics, a leading semiconductor manufacturer. Key features of the STM32F407ZET6 include a 168 MHz ARM Cortex-M4F core with FPU and DSP instructions, 512 KB flash, 192 KB SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 12x general-purpose 16-bit timers, 2x 32-bit timers, and a true random number generator (RNG). It also offers advanced connectivity with 2x CAN, 6x USART, 3x SPI, 3x I2C, 1x SDIO, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface (DCMI). The device supports a wide supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C (or +105°C for the suffix 'I' variant). Technically, the STM32F407ZET6 leverages the ARM Cortex-M4F core with a single-precision FPU, enabling efficient handling of floating-point arithmetic for signal processing and control algorithms. The memory architecture includes a 64 KB CCM (Core Coupled Memory) RAM for time-critical data, and the flash supports read-while-write for firmware updates. The device features a sophisticated clock tree with a PLL capable of generating up to 168 MHz from an external 8 MHz crystal, and includes multiple low-power modes (Sleep, Stop, Standby) for energy-sensitive applications. Typical applications include industrial motor control, medical equipment, consumer electronics, IoT gateways, and audio processing. The combination of high clock speed, rich peripherals, and connectivity options makes it suitable for complex real-time control and data acquisition systems. For example, in a drone flight controller, the STM32F407ZET6 can handle sensor fusion, PID control loops, and communication with ground stations simultaneously. When designing with this device, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to each VDD pin, and a 4.7 uF bulk capacitor. The VDDA analog supply should be filtered with a ferrite bead and a 1 uF capacitor to minimize noise for ADC accuracy. Also, consider the thermal dissipation: the LQFP144 package has a thermal resistance of 40°C/W (theta_JA), so for high clock speeds and heavy peripheral usage, adequate PCB copper area is recommended.

USD $6.60 Hubungi kami
STM32F407ZET7 - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F407ZET7

STM32F407ZET7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407ZET7 is a 32-bit ARM Cortex-M4 microcontroller with FPU, operating up to 168 MHz, with 512 KB flash memory and 192+4 KB RAM in a 144-LQFP (20x20 mm) package. It is a high-performance STM32F4-series MCU intended for embedded control, communications, industrial equipment, audio, networking, and camera-oriented designs. A microcontroller is a programmable semiconductor system that integrates a CPU core, memory, peripherals, and I/O into one device. The Cortex-M4 architecture belongs to the ARM Cortex-M family of embedded processors, while the STM32F407ZET7 combines that core with extensive connectivity and control peripherals. The integrated FPU supports single-precision floating-point instructions, while the ART Accelerator enables high-performance execution from flash. Key specifications include 168 MHz maximum operating frequency, 512 KB of flash memory, 192+4 KB of RAM, a 144-LQFP package, USB OTG HS/FS, Ethernet, 17 timers, 3 ADCs, 15 communication interfaces, and camera support. The STM32F407 platform is suitable for designs requiring a balance of real-time processing, peripheral integration, and external communications. The Cortex-M4 processor includes a single-precision FPU and DSP instruction support, making it more suitable than a basic Cortex-M0-class device for control algorithms, signal processing, audio, and communications workloads. The STM32F407 device family is commonly used where a 32-bit embedded controller is needed without moving to a higher-end Cortex-M7 or application processor. Typical applications include industrial automation equipment, Ethernet-connected control systems, USB peripherals, audio and DSP products, camera interfaces, motor and motion-control systems, and networked embedded products. The broad peripheral set can reduce the need for external interface chips when the application requires USB, Ethernet, timers, ADC channels, or multiple serial interfaces. When designing around this MCU, verify the exact peripheral pin assignments, power requirements, clock configuration, memory map, and package-specific land pattern against the manufacturer datasheet. The LQFP-144 package exposes more I/O than smaller STM32 packages, but the high pin count requires careful routing and adequate thermal copper distribution. This page combines verified distributor data, application guidance, comparison information, and practical design notes for engineers evaluating the STM32F407ZET7.

RFC Hubungi kami
STM32F407ZGT6 - 168MHz Cortex-M4F MCU, 1MB Flash | STMicroelectronics
STM32F407ZGT6

STM32F407ZGT6 - 168MHz Cortex-M4F MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F407ZGT6 is a high-performance 32-bit microcontroller with an ARM Cortex-M4F core with FPU running at 168 MHz, integrating 1 MB of Flash and 192 KB of SRAM (+4 KB backup SRAM), housed in a 144-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable peripherals on a single chip. Within the component hierarchy, the STM32F407ZGT6 belongs to the STM32F4 series of 32-bit ARM Cortex-M MCUs, part of the broader STM32 family and the wider ARM Cortex-M microcontroller ecosystem used as the central control unit in industrial and consumer electronics. Key features include 210 DMIPS of performance (1.25 DMIPS/MHz) with DSP instructions and single-precision FPU, 1 MB Flash with 0-wait-state execution via the ART Accelerator, 3x 12-bit ADCs with 24 channels, 2x 12-bit DACs, and 17 timers. Connectivity is extensive: up to 4 USARTs, 3 SPIs, 3 I2Cs, 2 CANs, USB OTG FS/HS, and an Ethernet MAC. Built on a 90 nm process, the device features the adaptive real-time accelerator (ART) for zero-wait-state Flash execution and a memory protection unit (MPU) for RTOS designs. The DCMI camera interface and true random number generator (RNG) support vision and security designs. Multiple low-power modes (Sleep, Stop, Standby) enable battery-powered operation, and VBAT operation keeps the RTC alive in the deepest sleep. Typical applications include motor control drives, industrial automation PLCs, medical instrumentation, audio processing, IoT gateways, and data acquisition systems. The 15+ communication interfaces make it ideal for multi-protocol nodes, and the high-speed ADCs suit real-time control loops. Design consideration: place 100 nF decoupling capacitors on every VDD/VSS pair and follow ST layout guidelines; budget GPIO carefully, as 144 pins still get consumed quickly by the Ethernet and USB OTG HS functions. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $5.25 Dalam Stok
STM32F407ZGT6J - 168MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32F407ZGT6J

STM32F407ZGT6J - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F407ZGT6J is a 32-bit Arm Cortex-M4 microcontroller operating up to 168 MHz, with 1 MB of Flash memory and a 144-pin LQFP package measuring 20 mm by 20 mm. It combines an FPU, DSP instructions, an ART Accelerator, Ethernet MAC, camera interface, USB, and extensive connectivity for connected embedded systems. A microcontroller is a programmable integrated circuit that executes firmware, reads sensors, controls actuators, and manages communication interfaces. The STM32F4 family belongs to the embedded-processing hierarchy: MCU -> 32-bit RISC microcontroller -> Arm Cortex-M4 microcontroller -> STM32 family. The STM32F407ZGT6J is suited to applications requiring substantial flash storage, high processing throughput, and multiple peripheral interfaces. According to the STMicroelectronics product page and manufacturer datasheet, the device uses an Arm Cortex-M4 core with FPU and DSP support, reaches up to 168 MHz, and provides 1 MB of Flash. The supplied distributor data identifies a 144-LQFP package and a 20 mm by 20 mm body size. Its Ethernet MAC, camera interface, USB connectivity, and serial peripherals make it useful for industrial gateways, data acquisition equipment, audio systems, and network-connected controllers. The 168 MHz Cortex-M4 core supports high-performance control and signal-processing tasks, while the 1 MB Flash capacity accommodates larger firmware images and boot code. The ART Accelerator is identified in the manufacturer family datasheet as supporting zero-wait-state execution from Flash. Exact peripheral pin assignments, memory details, electrical limits, and package dimensions not explicitly provided in the supplied data remain subject to verification against the manufacturer datasheet. Typical applications include industrial monitoring, Ethernet-connected embedded controllers, camera-based vision equipment, USB peripherals, audio processing, and real-time control systems. The 144-LQFP package provides a large pin count relative to smaller MCU packages, supporting broad peripheral connectivity while requiring careful PCB layout and thermal validation. Engineers should confirm all alternate-function assignments, power requirements, decoupling, clock configuration, and programming support against the exact device datasheet. This page consolidates verified distributor and manufacturer information with sourcing, comparison, pin-compatibility, and design guidance. The alternatives listed are presented only where the supplied cross-reference evidence supports an aligned STM32F407-class package; engineers must still validate firmware, peripheral mapping, electrical limits, and qualification requirements before production substitution.

RFC Hubungi kami
STM32F407ZGT6TR - 168MHz Cortex-M4F MCU, 1MB Flash | STMicroelectronics (Tape & Reel)
STM32F407ZGT6TR

STM32F407ZGT6TR - 168MHz Cortex-M4F MCU, 1MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F407ZGT6TR is a high-performance 32-bit microcontroller with an ARM Cortex-M4F core with FPU running at 168 MHz, integrating 1 MB of Flash and 192 KB of SRAM (+4 KB backup SRAM), housed in a 144-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable peripherals on a single chip. Within the component hierarchy, the STM32F407ZGT6TR belongs to the STM32F4 series of 32-bit ARM Cortex-M MCUs, part of the broader STM32 family and the wider ARM Cortex-M microcontroller ecosystem used as the central control unit in industrial and consumer electronics. Key features include 210 DMIPS of performance (1.25 DMIPS/MHz) with DSP instructions and single-precision FPU, 1 MB Flash with 0-wait-state execution via the ART Accelerator, 3x 12-bit ADCs with 24 channels, 2x 12-bit DACs, and 17 timers. Connectivity is extensive: up to 4 USARTs, 3 SPIs, 3 I2Cs, 2 CANs, USB OTG FS/HS, and an Ethernet MAC. Built on a 90 nm process, the device features the adaptive real-time accelerator (ART) for zero-wait-state Flash execution and a memory protection unit (MPU) for RTOS designs. The DCMI camera interface and true random number generator (RNG) support vision and security designs. Multiple low-power modes (Sleep, Stop, Standby) enable battery-powered operation, and VBAT operation keeps the RTC alive in the deepest sleep. Typical applications include motor control drives, industrial automation PLCs, medical instrumentation, audio processing, IoT gateways, and data acquisition systems. The 15+ communication interfaces make it ideal for multi-protocol nodes, and the high-speed ADCs suit real-time control loops. Design consideration: place 100 nF decoupling capacitors on every VDD/VSS pair and follow ST layout guidelines; budget GPIO carefully, as 144 pins still get consumed quickly by the Ethernet and USB OTG HS functions. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $5.25 Dalam Stok
STM32F407ZGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F407ZGT7

STM32F407ZGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407ZGT7 is a high-performance 32-bit ARM Cortex-M4 microcontroller with a maximum operating frequency of 168 MHz, 1 MB of flash memory, and a 144-pin LQFP package measuring 20 mm by 20 mm. It integrates an ARM Cortex-M4 processor with floating-point capability, extensive communication peripherals, and high-resolution analog and timing resources for embedded control systems. A microcontroller is a compact computing platform that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one integrated circuit. STM32F4 devices belong to the ARM Cortex-M microcontroller hierarchy and are used to execute control software, acquire analog data, generate timing signals, and communicate with external systems. The STM32F407ZGT7 is positioned for designs requiring substantial processing performance and broad peripheral connectivity in a single component. Verified source data identifies the device as a 32-bit, 168 MHz Cortex-M4 MCU with 1 MB of flash and a 144-pin LQFP package. The STM32F405xx and STM32F407xx family supports Ethernet MAC, camera interface, USB, high-speed serial peripherals, multiple timers, analog conversion functions, and multiple communication interfaces according to the manufacturer family documentation. These features make the MCU suitable for connected industrial equipment, data acquisition systems, network appliances, camera-based products, and embedded audio applications. The Cortex-M4 architecture provides efficient real-time execution while the floating-point unit accelerates suitable software operations. The integrated peripherals reduce the need for external interface chips, allowing a design to consolidate control, communications, timing, and analog functions around one microcontroller. The 144-pin LQFP package also provides a large pin count compared with smaller MCU packages, supporting more external connections and broader board-level integration. Typical applications include industrial automation controllers, Ethernet-connected equipment, camera interfaces, USB-enabled embedded products, sensor acquisition systems, and motor or motion-control platforms. When selecting this MCU, engineers should verify the exact peripheral configuration, package pinout, power requirements, clock configuration, memory use, and software support for the intended design. The STM32F407ZGT7 is therefore a suitable candidate when a high-performance Cortex-M4 MCU and extensive peripheral integration are more important than a very small package footprint. This page combines verified manufacturer and distributor information with package-oriented design guidance and clearly separates directly verified facts from parameters that require confirmation from the complete manufacturer datasheet. It is intended to support engineering selection, PCB planning, sourcing, and initial hardware design rather than replace the official electrical and reference documentation.

RFC Hubungi kami
STM32F410C8U6 - 100MHz Cortex-M4 MCU, 64KB Flash | STMicroelectronics
STM32F410C8U6

STM32F410C8U6 - 100MHz Cortex-M4 MCU, 64KB Flash | STMicroelectronics

STMicroelectronics STM32F410C8U6 is a 32-bit ARM Cortex-M4 microcontroller with a maximum operating frequency of 100 MHz, 64 KB of embedded flash memory, 32 KB SRAM, and a 48-pin UFQFPN package measuring 7 x 7 mm. The device operates from 1.7 V to 3.6 V and is specified for an industrial temperature range of -40°C to +85°C. A microcontroller is a programmable system-on-chip that combines a processor core, embedded memory, analog and digital peripherals, and communication interfaces on one integrated circuit. The STM32F410 belongs to the STM32F4 product family and uses the Arm Cortex-M4 processor architecture. Its combination of 100 MHz processing performance, integrated 64 KB flash, and a compact 7 x 7 mm package makes it suitable for cost-sensitive embedded systems that require more capability than a basic 8-bit controller but do not need a high-pin-count microcontroller. Key device characteristics include 32-bit processing at up to 100 MHz, 64 KB of embedded flash, 32 KB SRAM, a 12-bit ADC, and operation from a 1.7 V to 3.6 V supply. The verified product listings also identify the STM32F410 series as an entry-level member of the STM32F4 family for medical, industrial, and consumer applications. The UFQFPN-48 package provides 48 contacts on a compact surface-mount footprint. The Cortex-M4 core supports efficient control-oriented software, while the integrated flash and SRAM reduce the need for external memory in moderate-complexity designs. The STM32F410 family balances processing performance, power efficiency, and integration. Because this specific verified data does not enumerate the complete peripheral set, exact timer, communication-channel, GPIO, and debug configurations must be confirmed in the manufacturer datasheet before final firmware and board qualification. Typical uses include industrial sensing and control equipment, medical monitoring instruments, consumer accessories, compact motor controllers, and connected embedded products. For analog measurement, the device's 12-bit ADC supports sensor acquisition, while its 100 MHz core provides headroom for digital filtering, communication protocol handling, and supervisory control tasks. Final ADC accuracy and peripheral timing must be assessed under the intended operating conditions. A critical design consideration is PCB land-pattern and thermal-pad implementation. The 48-pin UFQFPN package has a 7 x 7 mm body and an exposed pad, so the footprint, solder mask, paste pattern, and stencil design should be taken directly from the manufacturer package drawing rather than approximated. Supply voltage must remain within 1.7 V to 3.6 V, and unused pins should follow the datasheet recommendations. This page combines the verified manufacturer and distributor specifications, package information, purchasing data, and practical qualification guidance. It also distinguishes a genuine drop-in alternative from related STM32F410 ordering codes, avoiding unsupported claims about cross-manufacturer pin compatibility, lifecycle status, or unverified electrical details.

RFC Hubungi kami
STM32F410CBT6 - 100MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32F410CBT6

STM32F410CBT6 - 100MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F410CBT6 is a 32-bit ARM Cortex-M4 microcontroller with a 100 MHz operating frequency, 128 KB of flash memory, and a 48-LQFP package measuring 7 x 7 mm. It operates from a 3.3 V supply and combines a compact surface-mount footprint with the processing performance required by embedded control, sensing, communication, and low-power IoT products. An ARM Cortex-M4 microcontroller is a reduced-instruction-set embedded processor built around the Arm Cortex-M4 core. This MCU belongs to the STM32F4 series and the broader STM32 product family, where embedded flash, digital peripherals, clock control, and power-management functions are integrated into a single device. Such architecture supports standalone control systems that require deterministic execution, low power consumption, and a broad selection of communication and sensing interfaces. The STM32F410CBT6 provides 128 KB of flash, organized as 128K x 8, together with a maximum CPU frequency of 100 MHz. Its 48-LQFP package offers 48 accessible package leads for compact PCB layouts in industrial controls, instrumentation, consumer products, and connected embedded devices. The 3.3 V operating supply also simplifies integration with common 3.3 V logic and sensor ecosystems. The Cortex-M4 architecture is suitable for code containing DSP-oriented instructions, control loops, protocol handling, and supervisory logic. By placing flash memory, the processor, and peripheral integration on one package, the STM32F410CBT6 reduces external component count and simplifies firmware deployment compared with a processor-centered design that uses separate program storage. Exact RAM size, clock-tree limits, peripheral counts, and electrical operating limits should be confirmed in the STM32F410CB datasheet before final design release. Typical applications include low-power environmental sensors, industrial monitoring terminals, compact user-interface controllers, connected motor-control modules, and handheld measurement instruments. A sensor-oriented design can use the MCU to acquire measurements, filter data, enforce thresholds, and communicate results through a serial interface. An industrial module can add watchdog-style supervision and peripheral control while retaining a compact 7 x 7 mm footprint. PCB implementation should follow the manufacturer pin-definition and layout guidance, especially for power pins, ground connections, decoupling, clock stability, and programming access. Confirm BOOT configuration, oscillator requirements, and decoupling values against the STM32F410CB datasheet and reference design guidance before fabrication. This page consolidates the verified STM32F410CBT6 product identity, 100 MHz Cortex-M4 performance, 128 KB flash configuration, package information, application guidance, and replacement considerations into an engineering-focused selection reference.

RFC Hubungi kami
STM32F410CBU3 - 100MHz Cortex-M4 MCU | STMicroelectronics
STM32F410CBU3

STM32F410CBU3 - 100MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F410CBU3 is a 32-bit ARM Cortex-M4 microcontroller with a maximum operating frequency of 100 MHz, 128 KB of Flash memory, and a 48-pin UFQFPN package measuring 7 x 7 mm. It belongs to the STM32F4 series and is designed for compact embedded applications that require efficient processing, integrated memory, and a low-pin-count surface-mount footprint. The device is identified as a high-performance and DSP-enabled MCU with an Arm Cortex-M4 core. A microcontroller is a programmable semiconductor that integrates a processor core, Flash program memory, SRAM, peripherals, and communication interfaces into one device. The STM32F410CBU3 fits the hierarchy of embedded controller, 32-bit RISC microcontroller, ARM Cortex-M microcontroller, and STM32 family device. Its 100 MHz processing capability supports responsive control loops, human-machine interfaces, sensor processing, and connected embedded products without requiring a separate processor. The principal device characteristics visible for this exact ordering code include the ARM Cortex-M4 processor, 32-bit architecture, 100 MHz maximum frequency, 128 KB Flash, and 48-UFQFPN package. The STM32F410x8/B family is positioned by STMicroelectronics around the high-performance Cortex-M4 core. Exact SRAM capacity, voltage limits, peripheral inventories, pin assignments, temperature grades, and clock-tree details should be confirmed in the STM32F410CB technical documentation before schematic capture or firmware configuration. Typical uses include compact industrial control modules, environmental monitoring equipment, wearable accessories, building-control endpoints, and low-cost connected sensors. The 48-pin package provides more interface options than smaller packages while retaining a surface-mount land pattern suitable for automated assembly. A 7 x 7 mm UFQFPN footprint can reduce board area compared with larger leaded packages, although thermal-pad layout and manufacturing capability must be considered. The primary design consideration is to confirm the exact pinout, exposed-pad connection, supported supply voltage, peripheral multiplexing, and boot configuration for STM32F410CBU3. Designers should also validate the PCB footprint against the manufacturer drawing and check the programmed firmware against the selected device revision. This page combines confirmed product facts, practical design guidance, and a focused comparison framework for engineers evaluating this MCU.

RFC Hubungi kami
STM32F410CBU6 - 100MHz Cortex-M4 MCU | STMicroelectronics
STM32F410CBU6

STM32F410CBU6 - 100MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F410CBU6 is a 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 100 MHz, 128 KB of embedded Flash memory, and a 48-pin UFQFPN package measuring 7 mm by 7 mm. It combines a high-performance RISC core with integrated memories and peripherals for compact medical, industrial, and consumer-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, and analog or digital peripherals on one package. The STM32F410 belongs to the STM32F4 family and provides a balanced combination of processing capability, integration, and power efficiency. Its UFQFPN-48 package supports space-constrained equipment while retaining a substantial set of embedded resources. The STM32F410CBU6 operates with a 32-bit architecture at up to 100 MHz and includes 128 KB of Flash memory. Its 48-pin surface-mount package uses an exposed-pad UFQFPN construction, according to distributor and manufacturer product information. The device is intended for applications requiring embedded control rather than a general-purpose host processor, including portable medical equipment, industrial controllers, and compact consumer products. Its Cortex-M4 architecture supports efficient embedded processing while the 128 KB Flash block provides room for firmware, configuration data, and application logic. The 48-pin UFQFPN package exposes the device's I/O and supply connections on a compact 7 mm by 7 mm footprint. Because the package includes an exposed thermal pad, PCB layout and land-pattern assembly should follow the manufacturer drawing rather than relying on a generic QFN footprint. Typical uses include connected medical devices, industrial sensing and control modules, compact sensor nodes, and consumer accessories. The STM32F410 product family is positioned as an entry-level member of the STM32F4 series, balancing performance with integration and power efficiency. It is well suited to control tasks that benefit from an Arm Cortex-M4 core without requiring a larger package or higher-memory-density device. During schematic capture, assign every power, ground, reset, boot, and debug connection exactly as shown in the STM32F410CB pin-description table. Place decoupling capacitors close to the relevant supply pins, follow the exposed-pad land pattern, and confirm the supported voltage and temperature limits for the selected ordering code before releasing the PCB. This product page combines the manufacturer's STM32F410 family information with package, memory, and procurement details. It also provides focused alternatives, application guidance, and engineering considerations that help shorten MCU selection and board-layout review.

RFC Hubungi kami
STM32F410R8T6 - 100MHz Cortex-M4 64KB MCU | STMicroelectronics
STM32F410R8T6

STM32F410R8T6 - 100MHz Cortex-M4 64KB MCU | STMicroelectronics

STMicroelectronics STM32F410R8T6 is a 32-bit Arm Cortex-M4 microcontroller with up to 100 MHz operating frequency, 64 KB of Flash memory, 32 KB of RAM, and a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM32F4 series, combining a high-performance 32-bit RISC core with integrated embedded memory and peripherals for compact embedded systems. The STM32F4 family is a group of 32-bit microcontrollers in the broader semiconductor and embedded-processing hierarchy. The STM32F410 line is positioned as an entry-level member of the STM32F4 series and is designed for medical, industrial, and consumer applications that require balanced performance, power efficiency, integration, and compact packaging. This particular device combines an Arm Cortex-M4 processor with embedded Flash and SRAM and operates from a single low-voltage supply. Verified product information identifies a maximum operating frequency of 100 MHz, 64 KB of Flash memory, and a 64-LQFP package. The Cortex-M4 architecture provides 32-bit processing and floating-point-oriented embedded control capability when the FPU is enabled. Integrated on-chip memory reduces external component count, while the 10 mm by 10 mm LQFP package provides exposed leads that can be inspected and assembled using conventional manufacturing processes. The STM32F410R8T6 is designed for applications that need a compact general-purpose controller rather than a large system-on-module. Its Arm Cortex-M4 core can support responsive control logic, serial communications, data acquisition, and supervisory functions. The 100 MHz operating limit provides additional performance headroom over lower-frequency entry-level microcontrollers, although final firmware timing must be validated against clock, peripheral, and memory-access requirements. Typical uses include industrial sensor hubs, medical monitoring instruments, consumer controls, embedded measurement equipment, and low-cost connected products. The 64 KB Flash configuration is appropriate for compact firmware, while the 32 KB SRAM supports working buffers, protocol stacks, and intermediate calculations. An STM32F410-family microcontroller in a 64-pin package is particularly useful when a design needs more peripheral options than smaller packages provide while retaining conventional leaded-package assembly. When designing a board around the STM32F410R8T6, preserve the exact pin multiplexing, power, ground, clock, and debug requirements from the manufacturer documentation for the selected ordering code. Because the supplied web results identify the package and core but do not provide a complete verified pin table, engineers should confirm all 64 connections, exposed programming interfaces, supply requirements, decoupling values, and unused-pin treatment against the official STM32F410 documentation before release. This product page consolidates the verified 100 MHz Cortex-M4, 64 KB Flash, 32 KB RAM, and LQFP-64 characteristics with distributor pricing, source links, practical application guidance, and same-package replacement candidates. It also distinguishes basic PCB compatibility from complete firmware, peripheral, qualification, and lifecycle equivalence, helping engineers make an evidence-based sourcing decision.

RFC Hubungi kami
STM32F410RBT6 - 32-Bit 100MHz Cortex-M4 MCU | STMicroelectronics
STM32F410RBT6

STM32F410RBT6 - 32-Bit 100MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F410RBT6 is a 32-bit Arm Cortex-M4 RISC microcontroller operating up to 100 MHz, with 128KB of flash memory and a 64-LQFP package measuring 10 x 10 mm. It belongs to the STM32F4 microcontroller family and is designed for compact embedded control systems requiring efficient real-time processing, low-power operation and a broad set of peripheral interfaces. The device combines a high-performance 32-bit Cortex-M4 core with 128KB flash memory in an LQFP-64 surface-mount package. A microcontroller is an integrated circuit that contains a processor core, program memory, data memory, peripherals and interface circuitry on one semiconductor device. The STM32F4 family sits within the Arm Cortex-M microcontroller hierarchy, where the STM32F410RBT6 provides a balance of processing performance, memory capacity and power efficiency. Its 100 MHz operating frequency supports responsive control loops, while the Arm Cortex-M4 instruction set provides efficient handling of embedded applications. The STM32F410RBT6 includes 128KB of flash memory organized as 128K x 8, as identified in the manufacturer and distributor product descriptions. Its 32-bit architecture and 100 MHz maximum clock frequency make it suitable for consumer devices, sensor hubs, industrial control modules and connected embedded products. The device also supports floating-point and DSP-oriented application requirements, matching the STM32F4 positioning for efficient control and signal-processing workloads. The STM32F410RBT6 is packaged in a 64-LQFP configuration with a 10 x 10 mm outline. LQFP packages provide exposed leads around the perimeter of the package, making them suitable for automated assembly and designs that require a conventional surface-mount footprint. The STM32F410RB product page identifies the STM32F410x8/B devices as Arm Cortex-M4 devices operating at up to 100 MHz, while the DigiKey listing specifies the 64-LQFP package and 128KB flash configuration. Typical applications include compact industrial controllers, environmental monitoring nodes, wearable and accessory control boards, communication modules, motor-control peripherals and general-purpose embedded control platforms. The combination of 32-bit processing, 128KB flash memory and a 64-pin package provides flexibility for applications requiring multiple I/O functions in a relatively small board area. Designers should use the manufacturer datasheet pin description table when assigning PCB nets and should verify oscillator, debug, power, reset and peripheral configuration requirements against the exact package variant. Firmware development should also account for the STM32F410 device family's clock, flash-memory and peripheral characteristics rather than assuming compatibility with unrelated STM32 families. This product page combines manufacturer-device identification, package and memory details with application guidance, comparison fields and practical design considerations. It is intended to help engineers identify the STM32F410RBT6 and determine whether its Cortex-M4 performance, 128KB flash memory and 64-LQFP footprint fit a new embedded-control design.

RFC Hubungi kami