Produk (44,000+)

XC4VLX15-10FF676I - 320-I/O Virtex-4 LX FPGA | AMD
XC4VLX15-10FF676I

XC4VLX15-10FF676I - 320-I/O Virtex-4 LX FPGA | AMD

AMD XC4VLX15-10FF676I is a Virtex-4 LX field-programmable gate array with 320 user I/O, 13,824 logic cells, a -10 speed designation, and a 676-pin Flip-Chip Ball Grid Array package. The industrial-temperature suffix I identifies its intended operating class for demanding embedded systems. Its programmable logic fabric supports parallel processing, interface bridging, protocol conversion, and high-speed control functions within a single device. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. It belongs to the hierarchy of programmable logic devices, including complex programmable logic devices and FPGAs, and occupies the programmable logic and semiconductor categories. Unlike fixed-function application-specific integrated circuits, an FPGA can be reprogrammed for different architectures, algorithms, and peripheral combinations while retaining the same board-level package. The XC4VLX15 combines 13,824 logic cells with 320 user I/O in a 676-FCBGA package. Its catalog listing identifies 884,736 as an additional device-resource metric. The -10 designation is retained by the comparable ordering variants listed for this family. Industrial-grade availability and high pin density make the device appropriate for complex control systems requiring substantial external connectivity rather than compact low-I/O applications. The device integrates programmable logic with dedicated FPGA resources, allowing parallel datapaths to be implemented without relying on repeated processor instruction execution. The large I/O count supports memory interfaces, high-speed serial links, parallel buses, clock distribution, and multiple peripheral interfaces. Engineers must still validate every external interface against the manufacturer’s pinout files and device constraints before finalizing a high-speed board. Typical applications include industrial automation, telecommunications equipment, video processing, test and measurement systems, communications infrastructure, and embedded control platforms. The 320-I/O capacity is especially useful where several buses, memories, converters, and control signals converge on one FPGA. Its 676-pin FCBGA package supports dense interconnect but requires careful escape routing, adequate PCB microvias, and controlled power delivery around the device. The primary design consideration is package complexity. A 676-FCBGA footprint has a much finer escape-routing requirement than a leaded package, so layer count, via geometry, solder-mask definition, and assembly capability should be reviewed before layout begins. Power, ground, configuration, and high-speed signal integrity should be evaluated together rather than treated as separate routing tasks. This page combines catalog specifications, compatible ordering variants, comparison information, and practical implementation guidance for engineers evaluating the XC4VLX15-10FF676I. Use the manufacturer pinout files and device documentation for the authoritative ball assignment and final design sign-off.

RFC Hubungi kami
XC4VLX15-10SF363C - 13,824-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX15-10SF363C

XC4VLX15-10SF363C - 13,824-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX15-10SF363C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 inputs, 240 outputs, and a 363-ball FCBGA package. It uses 90 nm CMOS technology and is associated with a 1.2 V supply. The -10 suffix denotes the speed grade, while SF363 identifies the 363-ball package and the C suffix identifies the commercial temperature grade. These characteristics make the device suitable for high-performance programmable logic, embedded processing, networking, communications, industrial control, and test-equipment designs. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnect, and programmable resources are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured to implement parallel processing, protocol handling, interface bridging, signal processing, and control logic. The Virtex-4 LX family is designed for balanced logic density, block RAM, dedicated multipliers, and high-speed serial I/O capabilities. The XC4VLX15 provides 13,824 logic cells and supports 240 input and 240 output terminals in a 363-ball FCBGA package. The listed logic density and I/O count make it useful for designs that need substantial parallel throughput without moving to a larger device. Its 1.2 V core-supply operation is suitable for modern FPGA power architectures when paired with correctly designed regulators, bypass capacitors, and I/O voltage planning. The commercial grade is associated with a 0 °C to 85 °C operating-temperature range. The device is manufactured using 90 nm CMOS technology and is identified as a -10 speed-grade member. This places it in the Virtex-4 LX performance class for designs that require predictable timing closure at moderate logic density. Exact clock-rate, memory, multiplier, and power specifications must be selected from the manufacturer documentation for the specific design configuration because FPGA performance depends on the implemented logic, clocking, I/O standards, and timing constraints. Typical applications include network interface and packet-processing equipment, industrial automation controllers, communications infrastructure, embedded test systems, and high-speed signal-processing platforms. In each case, the 240 I/O terminals and 13,824 logic cells provide a practical balance between connectivity and programmable logic capacity. Designs requiring embedded hard processors or substantially higher logic density should be reviewed against other FPGA families before schematic capture. PCB implementation should preserve the 363-ball footprint and follow the manufacturer's escape-routing and via-in-pad guidance. Decoupling must be placed directly at the relevant supply balls, while high-speed routing requires short return paths and controlled reference-plane continuity. Because no complete ball map is reproduced here, use the pin-description table in the manufacturer datasheet when assigning power, ground, configuration, clock, and user I/O balls. This page consolidates the exact orderable MPN, package and technology details, source-backed specifications, realistic drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers evaluate the XC4VLX15-10SF363C for legacy or ongoing Virtex-4 LX designs without changing the board footprint unnecessarily.

RFC Hubungi kami
XC4VLX15-10SF363I - 13,824-Cell FPGA | AMD Xilinx | Industrial
XC4VLX15-10SF363I

XC4VLX15-10SF363I - 13,824-Cell FPGA | AMD Xilinx | Industrial

The AMD Xilinx XC4VLX15-10SF363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 90 nm CMOS technology, a 1.2 V supply, and a speed grade of 10. The device is supplied in a 363-pin FCBGA package measuring 17 × 17 mm. Its combination of parallel programmable logic, block RAM, and DSP resources makes it suitable for embedded systems that require substantial fixed-function acceleration without the complexity of a discrete processor, ASIC, or multi-chip implementation. A field-programmable gate array is a semiconductor device containing configurable logic and interconnect resources. An FPGA sits within the broader hierarchy of programmable-logic semiconductors, combining the parallel performance of hardware with firmware-like design flexibility. The Virtex-4 LX family uses 90 nm CMOS construction and is positioned between general-purpose FPGAs and larger high-performance programmable-logic devices. This makes the XC4VLX15 useful where parallel datapaths, high-speed interface termination, protocol handling, or fixed-function acceleration must coexist on one device. The XC4VLX15 device contains 13,824 logic cells. The same-family documentation identifies 864 Kb of block RAM and 32 DSP slices for the Virtex-4 LX 15 configuration. These resources allow designers to implement parallel filters, control logic, packet processing, signal transformation, and interface bridges in hardware. Block RAM can store lookup tables, packet buffers, or fixed coefficients, while the DSP slices can accelerate multiply-accumulate operations commonly found in digital filtering, signal processing, and fixed-point arithmetic. The “-10” portion identifies speed grade 10, allowing the design to meet the timing requirements associated with that performance class. The device operates from a 1.2 V supply and uses a 363-ball FCBGA package with a reported 0.8 mm ball pitch. Its large BGA land pattern supports numerous high-speed I/O connections, but it also requires careful PCB routing, controlled-reference-plane design, thermal analysis, and assembly-process compatibility. The industrial “I” suffix distinguishes this ordering variant from commercial-temperature variants, while the “SF” ordering code identifies the package and finish configuration used by the device family. Typical applications include industrial control systems, communications infrastructure, video-processing equipment, instrumentation, and embedded signal-processing systems. In each case, the device can consolidate multiple fixed-function blocks into a single programmable platform. Designers can use serial or parallel interfaces to connect processors, memory, converters, and network transceivers, while programmable logic handles protocol conversion, data alignment, buffering, and real-time control. This integration can reduce component count and simplify system architecture when requirements are stable enough to justify programmable logic. The primary design trade-off is package complexity. A 363-pin FCBGA requires a fine-pitch multilayer PCB, suitable solder-mask and paste design, X-ray or other assembly inspection, and careful handling of thermal expansion. Signal-integrity work is equally important because high-speed I/O performance can be affected by return paths, impedance discontinuities, supply noise, and inadequate decoupling. Use the manufacturer’s device pinout, package data, and PCB design guidance when defining the land pattern, power planes, and assembly process. This product record combines the confirmed XC4VLX15-10SF363I device identity, package information, logic-cell count, process technology, supply voltage, and available drop-in ordering variants with practical guidance for FPGA selection, PCB implementation, sourcing, and system integration.

RFC Hubungi kami
XC4VLX15-11FF668C - 13,824-L-Cell Virtex-4 LX FPGA | AMD
XC4VLX15-11FF668C

XC4VLX15-11FF668C - 13,824-L-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX15-11FF668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 884,736 bits of block RAM, 32 DSP slices, and a 668-ball FCBGA package measuring 27 mm by 27 mm. It combines programmable logic, dedicated memory, and DSP resources for parallel processing, interface adaptation, and embedded control applications. A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. Within the broader programmable-logic hierarchy, an FPGA sits above CPLDs and provides substantially greater logic, memory, and high-speed I/O capacity. The Virtex-4 LX family is positioned between smaller FPGA families and larger high-performance platforms, making it suitable for demanding embedded systems that require parallel computation and flexible interfaces. Key resources include 13,824 logic cells, 864 Kb of block RAM, and 32 DSP48 slices. The dedicated DSP resources accelerate multiplication and arithmetic operations without requiring each operation to be implemented entirely in general-purpose LUT logic. The 668-ball FCBGA package also supports dense board routing for designs with numerous high-speed connections and substantial interface requirements. The “11” portion of the ordering code identifies speed grade 11, while the “C” suffix identifies the commercial-temperature grade. The “FF668” package designation identifies the 668-ball surface-mount package used by this device. Together, these ordering fields provide a concise way to distinguish performance grade, temperature grade, and mechanical package without changing the underlying XC4VLX15 device architecture. Typical design uses include industrial control and automation, networking equipment, test and measurement systems, embedded video processing, communications infrastructure, and high-throughput signal-processing modules. In each case, the FPGA can implement multiple parallel data paths, maintain timing-critical interfaces, and adapt hardware behavior through programmable logic after board fabrication. PCB implementation requires careful power, clock, and differential-signal routing. The 27 mm square FCBGA requires a compatible escape-routing strategy, and high-speed interfaces require controlled impedance, continuous reference planes, and minimized return paths. Designers should also review the AMD Virtex-4 package pinout files and power-decoupling guidance before releasing the layout. This product page consolidates the device identity, package characteristics, resource counts, drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers evaluate mechanical reuse, speed-grade differences, temperature-grade differences, and system-level suitability before committing a Virtex-4 LX design to production.

RFC Hubungi kami
XC4VLX15-11SF363I - 13,824-Cell 90nm FPGA | Xilinx, Inc.
XC4VLX15-11SF363I

XC4VLX15-11SF363I - 13,824-Cell 90nm FPGA | Xilinx, Inc.

Xilinx, Inc. XC4VLX15-11SF363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 user I/Os, and a 363-ball FCBGA package. The device uses 90 nm CMOS fabrication and is specified around a nominal 1.2 V core supply. Its -11 speed grade targets demanding general-purpose logic, DSP, embedded processing, networking, and industrial control applications requiring substantial programmable resources in a single package. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and dedicated blocks are configured after manufacture. The FPGA category sits below programmable logic and above fixed-function processors and custom application-specific integrated circuits. Compared with a mask-programmed ASIC, an FPGA allows design revisions, field updates, and hardware customization without fabricating a new ASIC mask. Compared with smaller CPLDs, it provides substantially greater logic, memory, dedicated processing, and high-speed I/O capability. The XC4VLX15-11SF363I provides 1,536 configurable logic blocks and 13,824 logic cells, with 240 user I/Os distributed through the 363-FCBGA package. Its architecture supports parallel logic implementation, DSP processing, block RAM, and dedicated I/O resources, depending on the selected device features and design. The nominal 1.2 V core voltage is accompanied by a stated operating range of 1.14 V to 1.26 V, while separate supply rails support the device's configurable and fixed-function I/O structures. The -11 designation identifies the device's speed grade, while the industrial suffix identifies its specified operating-temperature class. The package's ball count is larger than its user-I/O count because the FCBGA also provides power, ground, configuration, dedicated function, and other package balls. A complete PCB design must follow the manufacturer package pinout, differential-pair rules, power-plane arrangement, and via requirements rather than treating all 363 balls as general-purpose user I/O. Typical uses include industrial automation, communications infrastructure, test and measurement, high-speed signal processing, embedded control, and prototype systems requiring a high logic-cell count. The Virtex-4 architecture is particularly useful when a design needs parallel DSP pipelines, moderate on-chip RAM, numerous user I/Os, and reconfigurable hardware in one device. Designs should account for configuration memory, startup behavior, clocking, termination, and tool-version compatibility during migration or maintenance. PCB implementation should place decoupling capacitors close to the associated supply balls, route clocks with short return paths, preserve regulated supply sequencing, and use the manufacturer's recommended ball-pad geometry. Because this is a fine-pitch FCBGA device, inspection, assembly, solder-mask definition, via-in-pad practice, thermal management, and board warpage are as important as logic selection. Configuration pins and dedicated inputs must not be left unconstrained merely because they are not user I/Os. This product record combines the verified device identity, package and logic-resource details with sourcing guidance, replacement constraints, and practical design notes. It also distinguishes true package-compatible order-code variants from larger-package devices that would require a PCB redesign, helping engineers evaluate replacement and redesign decisions before committing a new design.

RFC Hubungi kami
XC4VLX15-12FF676C - 13,824-Cell FPGA | AMD | Embedded
XC4VLX15-12FF676C

XC4VLX15-12FF676C - 13,824-Cell FPGA | AMD | Embedded

The AMD XC4VLX15-12FF676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 676-ball FCBGA package. It uses 90 nm CMOS technology with a stated 1.2 V core supply, making it a configurable logic platform for embedded control, signal processing, communications, and industrial systems. The -12 suffix identifies the device speed grade, while FF676C identifies its 676-ball package configuration. An FPGA is a programmable semiconductor whose digital logic, interconnect, and I/O resources are configured after manufacture. Within the electronics hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs, rather than fixed-function processors or application-specific integrated circuits. Its parallel architecture can execute multiple control, filtering, protocol, or interface functions concurrently, while configuration data determines the implemented circuit. The Virtex-4 LX family combines programmable logic with dedicated resources for demanding embedded designs. The XC4VLX15-12FF676C provides 13,824 logic cells and 320 I/O in one compact package. Its 676-ball surface-mount format supports dense PCB routing, although the large ball pitch and fine-pitch escape routing require careful PCB planning. The 90 nm CMOS process and 1.2 V core voltage should be considered when planning clocking, power delivery, and thermal performance. The device is suited to applications requiring substantial parallel logic rather than a low-pin-count simple controller. Potential uses include industrial automation, test and measurement, communications infrastructure, embedded video processing, and control systems. A 320-I/O budget can connect memory interfaces, parallel buses, high-speed serial links, clocking resources, and external converters while retaining configurable logic capacity. For a new Virtex-4 LX design, engineers should preserve the exact device pinout, supported memory interfaces, configuration interface, and power architecture of the XC4VLX15-12FF676C. Configuration storage and startup behavior are as important as logic capacity: use the manufacturer package pinout files and device documentation when assigning PCB balls and selecting companion components. Thermal design is driven by core activity, I/O toggling, voltage conversion, and ambient conditions. Decoupling networks should follow the manufacturer guidance for each supply rail, and high-speed clock and serial-routing decisions should be made before layout is finalized. Because this package exposes 676 contacts, assembly inspection and board-planarization checks are especially important. This product page combines the exact ordering information, package characteristics, verified technical attributes, same-family drop-in candidates, comparison parameters, and practical design guidance into one engineering reference. It also highlights which attributes require confirmation against the AMD Virtex-4 LX documentation before schematic release or PCB signoff.

RFC Hubungi kami
XC4VLX25-10FF668C - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-10FF668C

XC4VLX25-10FF668C - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-10FF668C is a Virtex-4 LX field-programmable gate array with 24,192 programmable logic cells, 448 I/O sites, and a 668-pin FCBGA package. It uses 90 nm CMOS fabrication technology, a 1.2 V core supply, and a -10 speed grade for general commercial applications. The FPGA combines programmable logic, block RAM, dedicated DSP processing resources, and programmable I/O in a single device. A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where configurable logic blocks are connected through programmable routing resources. Compared with application-specific integrated circuits, an FPGA permits hardware updates, parallel processing, and rapid adaptation without redesigning an ASIC. The Virtex-4 LX family targets demanding signal-processing, communications, industrial-control, and embedded-computing systems. The XC4VLX25 provides 2,688 configurable logic blocks, equivalent to the reported 24,192 logic cells, and 448 available I/O sites. Its 90 nm CMOS process and 1.2 V core voltage represent the architectural characteristics of the Virtex-4 generation. The -10 suffix identifies the device speed grade, while FF668 identifies a 668-pin FCBGA package configuration. The device supports high-density parallel logic and dedicated fixed-function resources within one programmable package. Virtex-4 LX devices combine general-purpose programmable logic with dedicated DSP blocks and block RAM. This heterogeneous architecture allows each design to allocate parallel arithmetic paths, storage, control logic, and external interfaces according to workload. The 448 I/O sites support substantial connectivity to memory, transceivers, converters, clocks, and custom peripherals. Exact RAM, DSP, and I/O characteristics should be confirmed in the relevant Virtex-4 family documentation before final resource allocation. Typical uses include digital signal processing, serial interface bridging, industrial automation, communications infrastructure, instrumentation, and embedded control. The 24,192-cell device is particularly appropriate when several parallel data paths must execute concurrently and design updates are needed after deployment. It is also suitable for legacy platform maintenance where an established Virtex-4 design, bitstream, and 668-pin board layout must remain unchanged. The main design consideration is board-level compatibility. A replacement must preserve the 668-pin FCBGA footprint, power architecture, configuration method, bank assignments, and supported bitstream behavior. A faster speed grade can change timing margins and should be evaluated against the original -10 timing constraints. Component substitutions should therefore be verified using the AMD package-pinout files and the original design constraints. This page organizes the device specifications, package implications, application fit, and compatible family variants into an engineering-oriented selection reference. It also distinguishes genuine drop-in options from unrelated FPGA families whose different die sizes, packages, I/O structures, and configuration requirements prevent direct board-level substitution.

RFC Hubungi kami
XC4VLX25-10FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10FF668I

XC4VLX25-10FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD

AMD XC4VLX25-10FF668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a 668-ball FCBGA package. The device is associated with a -10 speed grade and an industrial operating-temperature range of -40°C to 100°C. Its 90 nm CMOS implementation, 1.2 V core technology, and 1,028 MHz maximum clock frequency place it in the class of high-density FPGAs used for configurable logic, parallel processing, signal acquisition, and control systems. A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and input/output behavior are configured after manufacture. An FPGA sits above simple programmable logic devices in the digital-semiconductor hierarchy because it combines programmable logic blocks, block RAM, programmable I/O, dedicated arithmetic resources, and user-selectable routing. The XC4VLX25 belongs to the Virtex-4 LX family, where LX identifies the general-purpose logic density and architecture tier. The verified component listings identify 24,192 logic cells, 448 I/O, and a 668-ball grid-array package. This combination supports parallel datapaths and moderate-to-high pin counts on systems with complex control or interface requirements. The -10 designation identifies the performance grade, while the industrial suffix identifies the intended temperature class. A lead-free G-terminal variant of the same speed grade is also listed, providing a sourcing option where the required qualification and board-compatibility conditions are satisfied. The FPGA uses 90 nm CMOS technology and operates from a 1.2 V core supply according to the family-level comparison information. Its maximum clock frequency is listed as 1,028 MHz. Actual design performance depends on the selected Xilinx development environment, device configuration, clocking topology, memory interfaces, routing congestion, and the speed grade of the production device; a theoretical maximum clock should not be treated as a guaranteed system operating frequency. Typical Virtex-4 LX design uses cases include industrial control, networking equipment, instrumentation, telecommunications, embedded signal processing, test systems, and high-speed interface aggregation. The 448-I/O device is particularly useful where multiple buses, parallel converters, memory interfaces, clocks, and control signals must coexist on one programmable device. Its relatively large 668-ball package also requires careful PCB layout, power planning, and thermal analysis. Replacement planning should begin with the exact package and device family because footprint compatibility alone does not guarantee an interchangeable design. AMD support guidance identifies another XC4VLX25 in the same package as the fully compatible route, with speed grade and temperature grade determining suitability. PCB designers must also verify power sequencing, configuration memory, bank voltages, decoupling, differential I/O requirements, and the generated bitstream before approving a substitution. This page consolidates the device identity, package, temperature class, speed grade, and sourced replacement paths into an engineering-focused comparison. It also separates documented selection criteria from design-dependent performance, helping teams evaluate FPGA replacements without overlooking temperature, tooling, bitstream, or PCB compatibility requirements.

RFC Hubungi kami
XC4VLX25-10SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10SF363C

XC4VLX25-10SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-10SF363C is a Virtex-4 LX field-programmable gate array with 24,192 system gates, 2,688 configurable logic blocks, 240 user inputs, 240 user outputs, and a 1,028 MHz internal-frequency figure. It is packaged in a 363-ball FCBGA and operates in the commercial temperature range of 0°C to 85°C. The -10 suffix identifies a 10-speed-grade device, while the SF363 suffix denotes the FCBGA package configuration. A field-programmable gate array is a programmable digital semiconductor that belongs to the FPGA hierarchy within programmable logic devices, semiconductors, and embedded processing systems. Unlike a fixed-function ASIC, an FPGA allows designers to configure programmable logic, block memory, DSP48 processing resources, and interconnect paths after manufacture. This makes Virtex-4 LX devices useful when a design needs substantial parallel processing, flexible logic density, or product upgrades without fabricating a new custom chip. The XC4VLX25-10SF363C combines 2,688 configurable logic blocks with 48 DSP48 slices and 1,296 Kbit of block RAM. Its 240 I/O pins support interfaces to external memory, high-speed serial links, clocks, data acquisition hardware, and control peripherals. The advertised 1,028 MHz frequency is a device-level performance figure rather than a guarantee that every user design will operate at that rate; achievable clock speed depends on the selected logic path, resource usage, timing constraints, and I/O standard. The device is manufactured using 90 nm CMOS technology and belongs to the Virtex-4 LX family. Its large logic capacity allows multiple processing pipelines to coexist with parallel memory interfaces and DSP-intensive operations. Relative to smaller CPLDs, the XC4VLX25 provides substantially more configurable logic and dedicated block RAM, making it suitable for complex digital engines rather than simple combinational control logic. Relative to later FPGA families, however, it offers lower capacity and fewer high-speed serial transceiver resources. Typical uses include high-throughput signal processing, video and image pipelines, industrial control systems, communications infrastructure, test equipment, and embedded accelerators. The dedicated DSP48 resources are particularly useful for filtering, multiplication, fixed-point arithmetic, and digital modulation. Designers can also use the large block-RAM pool for packet buffering, lookup tables, waveform storage, and local data-plane memories. PCB design must account for the fine-pitch 363-ball FCBGA, power integrity, thermal performance, and high-speed routing. A multilayer board with a solid ground plane, short supply connections, carefully placed decoupling capacitors, and controlled clock routing is generally appropriate. Because this is a large BGA, via-in-pad or via-under-bump construction may be needed when the device does not provide a usable thermal escape path. This product overview combines the verified package, logic, I/O, speed-grade, temperature, and architectural details with a practical replacement framework. It also explains when another XC4VLX25 package-compatible configuration is a defensible substitution and when temperature, speed-grade, or package differences prevent a true drop-in replacement.

RFC Hubungi kami
XC4VLX25-10SF363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX25-10SF363I

XC4VLX25-10SF363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX25-10SF363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 user I/Os, 1,296 Kbit of block RAM, and 48 DSP48 slices in an FCBGA-363 package. The -10 speed grade is intended for general-purpose designs requiring a mature, high-density programmable logic platform. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, memory, and signal-processing resources can be configured after manufacture. The Virtex-4 LX family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated DSP resources, and high-speed I/O in one CMOS device. This integration allows complex parallel processing and interface functions to be implemented on a single package. The XC4VLX25-10SF363I provides 24,192 logic cells for digital control, datapath, protocol, and state-machine designs. Its 1,296 Kbit of block RAM supports buffering, packet storage, lookup functions, and data-plane pipelines. Forty-eight DSP48 slices provide dedicated arithmetic resources for filtering, fixed-point processing, and signal transformation, reducing the amount of logic that must be used for multiply-accumulate operations. The device offers 240 user I/Os and an internal frequency listed as 1,028 MHz in the device specifications. The FCBGA-363 package supports dense PCB routing, although its large pin count and fine-pitch ball array require careful escape routing, layer transitions, and thermal design. The listed operating-temperature range is 0°C to 85°C, placing the part in an industrial-temperature grade rather than an extended-temperature option. Typical uses include telecommunications line-card control, industrial automation, networking equipment, test and measurement systems, embedded signal processing, and high-speed interface bridging. The 48 DSP48 slices are particularly useful in filter, transform, and digital signal-processing pipelines, while the block RAM supports buffering and protocol state management. Board design should preserve adequate power and ground connectivity around the FCBGA-363 device and follow the manufacturer's package, decoupling, and thermal-layout guidance. Because this package contains 363 balls, escape routing and multilayer-transition planning should begin before component placement and stack-up decisions are finalized. This product record combines the known device specifications with lifecycle, procurement, and replacement guidance. It also distinguishes the exact XC4VLX25-10SF363I ordering code from the lead-free XC4VLX25-10SFG363I code and identifies the important package, speed-grade, environmental, and programming constraints engineers must check before reuse on an existing PCB.

RFC Hubungi kami
XC4VLX25-11FF668C - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-11FF668C

XC4VLX25-11FF668C - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-11FF668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a 668-ball FCBGA package. The device uses 90 nm CMOS technology and a 1.2 V core supply, combining programmable logic, block RAM, DSP resources, and programmable I/O in one high-performance FPGA package. A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after manufacture. The FPGA hierarchy places the device among programmable logic devices and system-programmable semiconductors, above individual combinational and sequential logic elements. Its parallel architecture makes it suitable for parallel data processing, signal generation, interface aggregation, and control functions that would require multiple conventional processors or ASIC blocks. The XC4VLX25 device provides 24,192 logic cells, 448 I/O, 1,327,104 block RAM bits, and 24,192 total logic-related resources in a 668-ball FCBGA package. Its -11 designation identifies the device speed grade, while the C suffix identifies the commercial temperature option. These parameters make the part relevant to communications equipment, industrial control, test and measurement, embedded video, and high-speed digital interface designs. The 90 nm Virtex-4 architecture combines configurable logic blocks with dedicated memory and DSP48 processing elements. This heterogeneous resource mix allows designers to map parallel arithmetic, filtering, packet handling, and control functions onto dedicated silicon while using programmable logic for interfaces and state machines. The large 448-I/O count supports substantial board-level connectivity without requiring multiple external interface devices. Typical applications include network packet processing, industrial automation controllers, data-acquisition systems, communications infrastructure, high-speed test equipment, and embedded processing platforms. The 668-ball grid-array package also demands careful PCB layout, controlled impedance routing, thermal analysis, and assembly process control because of its pin density and the number of simultaneous high-speed connections. For a new design, verify configuration compatibility, supported I/O standards, clocking resources, power rails, and board-level pin assignments against the manufacturer datasheet and package files. A replacement should preserve the Virtex-4 LX device density, package footprint, configuration capability, voltage requirements, and timing margin; changing only the speed or temperature grade can be appropriate when those requirements remain satisfied. This page consolidates package details, sourcing guidance, drop-in upgrade paths, and practical design considerations for engineers evaluating the XC4VLX25-11FF668C. It distinguishes exact compatibility from broader FPGA substitutions and focuses on options that can support controlled redesigns or board reuse.

RFC Hubungi kami
XC4VLX25-11FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11FF668I

XC4VLX25-11FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11FF668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O sites, 1,327,104 bits of block RAM, 24,192 DSP48 slices as listed in the product record, and a 668-ball FCBGA package. Built on 90 nm FPGA technology, the device operates from a 1.2 V supply and is identified by the -11 speed grade and industrial-temperature suffix. It combines programmable logic, dedicated arithmetic resources, block memory, and high-speed parallel I/O in one package. A field-programmable gate array is a semiconductor device whose digital circuitry is defined after manufacture through a configuration bitstream. The Virtex-4 LX family belongs to the FPGA and CPLD hierarchy within programmable-logic semiconductors. Instead of implementing every digital function with separate gates, a design can combine parallel processors, serial transceivers, clocking, memory, and custom interfaces in one configurable device. This integration reduces component count and provides flexible hardware that can be revised before final production. The XC4VLX25-11FF668I provides 24,192 logic cells, 448 I/O, 1,327,104 bits of block RAM, and a 668-pin FCBGA package. The listed 1.2 V core supply and 90 nm process are central to its performance and power characteristics. The -11 ordering code identifies the device speed grade, while the I suffix identifies the industrial temperature option. Its high pin count supports wide parallel interfaces and pin-intensive mixed-signal or networking equipment. Virtex-4 LX devices use configurable logic blocks and dedicated DSP48 arithmetic resources, with block RAM available for buffering, packet storage, and data-plane implementations. The architecture is suited to designs requiring parallel throughput, deterministic real-time behavior, or extensive I/O. Designers must also account for configuration storage, auxiliary supply rails, clock distribution, bank-specific voltage requirements, and the thermal demands of a large BGA device. Typical uses include network packet processing, telecom line-card and aggregation equipment, industrial control, high-speed data acquisition, digital signal processing, and embedded test systems. The 448 I/O sites and large logic capacity suit designs connecting multiple buses or external memories. The device can also support serial transceiver, clock, and digital signal-processing functions when the selected design and package connections permit them. Board design should follow the AMD Virtex-4 package pinout files and the manufacturer configuration guidance. Decoupling, multilayer return paths, controlled clock routing, and exposed-pad heat removal are critical in a 668-ball FCBGA layout. Configuration should include proper startup sequencing and a dependable completion indication, while unused pins and banks should follow the family guidance to avoid unnecessary signal activity. This product record combines package, resource, interface, and application information with practical replacement guidance. It also identifies same-footprint Virtex-4 LX options, distinguishes industrial and commercial temperature variants, and highlights the need to verify configuration compatibility before substituting a device in an existing board.

RFC Hubungi kami
XC4VLX25-11SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11SF363C

XC4VLX25-11SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11SF363C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 user I/O, and a 363-ball FCBGA package. It uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is offered in the -11 speed grade for designs requiring a balance of logic density, I/O capacity, and performance. The SFC363 package identifies the commercial-temperature 363-ball fine-pitch ball-grid-array configuration. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic, registers, block RAM, dedicated input/output resources, and programmable interconnect blocks on one device. Within the product hierarchy, the XC4VLX25 is an FPGA within the Virtex-4 LX family and a member of AMD's broader semiconductor portfolio. Its architecture allows parallel datapath, control, signal-processing, and interface logic to be consolidated into one device rather than assembled from separate logic devices. The principal device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 240 user I/Os, 90 nm CMOS construction, and a nominal 1.2 V supply. The -11 suffix denotes the device speed grade, while SF363 identifies the package and commercial temperature configuration. These features make the XC4VLX25 suitable for communications, industrial control, test equipment, embedded processing, and high-density digital interface systems requiring substantially more parallel logic than small CPLDs. The Virtex-4 LX architecture supports programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O standards. Engineers can distribute clocking, use dedicated input and output resources, and implement parallel signal-processing or packet-handling functions. Because this is an established FPGA family, design tools and intellectual-property ecosystems are mature; however, new designs must account for the device's legacy process, large BGA package, power characteristics, and end-of-life migration considerations. Typical deployments include telecom line-card control, video and image-processing pipelines, industrial automation, instrumentation, storage interfaces, and embedded communications gateways. The 240 available I/Os make the device particularly useful for systems combining multiple buses, parallel data acquisition, clock distribution, and on-chip memory. A clock-enabled serial transceiver is also included for high-speed point-to-point links in suitable configurations. PCB implementation requires careful power-plane design, decoupling, controlled impedance routing, and thermal analysis. The 363-ball FCBGA package requires X-ray inspection and appropriate PCB assembly capability, while power sequencing must follow the device's configuration and startup requirements. Engineers should preserve the documented pinout, decoupling network, and voltage tolerances, and should not assume that a higher-speed grade is a complete replacement unless its timing, temperature grade, and bitstream compatibility are confirmed. This product page combines the exact XC4VLX25-11SF363C identification, package details, family specifications, sourced replacement guidance, application guidance, and practical design considerations. It also distinguishes true same-footprint upgrade options from broader FPGA migrations, helping engineering teams preserve an existing 363-ball board when possible or plan a deliberate redesign when legacy-device constraints dominate.

RFC Hubungi kami
XC4VLX25-11SF363I - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-11SF363I

XC4VLX25-11SF363I - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-11SF363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 I/O, and a 363-pin FCBGA package. It operates from a 1.2 V core supply, provides 1,296 Kbit of block RAM, and includes 48 DSP slices for parallel signal-processing and fixed-point arithmetic. The -11 speed grade is intended for designs requiring the performance level associated with this Virtex-4 LX configuration. A field-programmable gate array, or FPGA, is a programmable logic device in which digital circuits are configured through a programmable logic array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during design, prototype, and production phases. Within the device hierarchy, the XC4VLX25-11SF363I belongs to the FPGA and CPLD class of programmable-logic semiconductors, specifically the Virtex-4 LX product family. The XC4VLX25 device contains 10,752 adaptive logic modules organized into 2,688 configurable logic blocks. Its 1,296 Kbit of block RAM supports buffering, packet storage, lookup tables, and moderate-width data paths without relying on external memories. Forty-eight DSP slices accelerate multiply, accumulate, filtering, and signal-processing operations. The listed maximum operating frequency is 1,205 MHz, although practical system performance depends on logic depth, routing, memory interfaces, speed grade, and board constraints. The SF363 package provides 240 user I/O in a 363-terminal FCBGA configuration measuring 17 mm by 17 mm. This high pin count supports wide parallel buses and multiple high-speed interfaces, while demanding careful ball-grid assignment, multilayer PCB construction, dense escape routing, and adequate thermal design. The device uses CMOS technology fabricated on a 90 nm process, combining substantial logic density with a mature programmable-logic architecture. Typical uses include industrial control, telecommunications aggregation, instrumentation, signal processing, communications infrastructure, and embedded systems requiring programmable parallelism. The Virtex-4 LX fabric is especially useful where a design must balance logic density, block RAM, DSP resources, high I/O count, and field programmability without committing to a custom ASIC mask set. A practical design constraint is power and signal integrity. The 1.2 V core and numerous high-speed I/O require multilayer power planes, local decoupling, controlled-impedance routing, and careful separation between clocks, data buses, and sensitive analog interfaces. Configuration storage, startup behavior, bank supply requirements, and the complete 363-ball pin map should be checked against the manufacturer datasheet before schematic capture or PCB release. This product record combines the device identity, package characteristics, verified resource counts, same-package alternatives, pricing status, and engineering guidance into one implementation-oriented reference. It is intended to support footprint planning, replacement assessment, resource budgeting, and FPGA architecture selection before the design moves to detailed schematic and layout work.

RFC Hubungi kami
XC4VLX25-12FF668C - 24,192-Cell FPGA | AMD | 668-FCBGA
XC4VLX25-12FF668C

XC4VLX25-12FF668C - 24,192-Cell FPGA | AMD | 668-FCBGA

The AMD XC4VLX25-12FF668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, a -12 speed grade, and a 668-pin FCBGA package. The device uses 90 nm CMOS technology and is designed for logic-intensive digital systems requiring programmable parallel processing, high-speed interfaces, and deterministic hardware functions. A field-programmable gate array, or FPGA, is a reconfigurable semiconductor in which logic and interconnect resources are programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a digital integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel data paths, control logic, protocol interfaces, and signal-processing functions in one configurable device, shortening development cycles and allowing field updates when the system configuration permits. The XC4VLX25 combines 24,192 logic cells with 2,688 configurable logic blocks, 448 user I/O, and a maximum stated clock frequency of 1,205 MHz. Its 90 nm CMOS construction and 1.2 V core supply suit demanding communications, networking, industrial control, image processing, and test-equipment designs. The -12 designation identifies its device speed grade, while the FF668 package code identifies the 668-pin FCBGA configuration. Its architecture allows multiple hardware pipelines to operate concurrently, making the FPGA suitable for deterministic data acquisition, protocol termination, traffic management, and custom accelerator functions. The 448 I/O resources provide substantial connectivity for external memory, clocks, controls, and high-speed interfaces. As with other large FPGAs, achievable system performance depends on pin assignment, clocking, memory implementation, signal integrity, power delivery, and the selected I/O standard. Typical applications include network interface controllers, industrial automation controllers, video-processing pipelines, communications equipment, and embedded test systems. In each case, the device can combine control logic and parallel datapaths while providing deterministic response times. The 668-pin FCBGA package also requires careful PCB layout because its dense ball array and high-speed connections demand controlled impedance, clean power distribution, and robust thermal design. For a new design, validate the complete I/O budget and pin assignments in the AMD pinout file before schematic capture. Route clocks independently from data paths, provide adequate decoupling, and keep sensitive inputs away from high-current switching nodes. Also confirm the selected I/O voltage domains, memory-interface topology, termination requirements, and power-sequencing conditions during system validation. This page combines the exact device identity, verified technical attributes, drop-in migration options, application guidance, and PCB-oriented design notes to support device selection and lifecycle planning. It also distinguishes exact-footprint alternatives from broader FPGA substitutions so engineers can evaluate replacement risk before modifying a released design.

RFC Hubungi kami
XC4VLX25-12SF363C - 24,192-LC FPGA | AMD Xilinx
XC4VLX25-12SF363C

XC4VLX25-12SF363C - 24,192-LC FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-12SF363C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 2,688 configurable logic blocks, and 240 I/O sites in a 363-pin FCBGA package. It uses a 90 nm CMOS process, operates from a nominal 1.2 V core supply, and belongs to the -12 commercial speed grade, which AMD identifies as the highest-performance Virtex-4 grade. A field-programmable gate array is a programmable digital semiconductor in the FPGA and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnects, block RAM, dedicated input/output resources, and embedded hard processors. Its configuration architecture allows one PCB design to support multiple logic functions through a bitstream, making Virtex-4 LX devices useful where performance, interface flexibility, and product differentiation must coexist within a high-pin-count package. The 24,192 available logic cells provide substantial parallel-processing capacity, while the 2,688 configurable logic blocks support pipelined datapaths, control logic, protocol bridges, and signal-processing functions. The device offers up to 240 user I/O sites, depending on the exact pin allocation and configuration. Its 363-FCBGA package is specified as 17 x 17 mm and uses surface-mount assembly, allowing dense connections between the FPGA and external memory, transceivers, clocks, and high-speed interfaces. The XC4VLX25 belongs to the Virtex-4 LX architecture and is manufactured on 90 nm CMOS technology. The -12 suffix identifies the commercial -12 speed grade. Published device information lists a maximum clock frequency of 1205 MHz and a core supply range of 1.14 V to 1.26 V, with 1.2 V nominal. These figures characterize the device family and selected commercial option rather than guaranteeing equivalent performance in every implemented design. Typical applications include telecommunications line-card and switching equipment, industrial control systems, high-throughput data acquisition, test and measurement platforms, embedded video processing, and network interface equipment. The large logic-cell count and I/O availability are particularly useful when parallel data paths must converge on high-speed serial links or external memory. Board design should preserve the manufacturer's recommended power architecture, use appropriate decoupling close to the supply pins, and follow the Virtex-4 packaging and pinout specification for escape routing. Configuration storage, clock distribution, termination, signal-integrity analysis, and thermal-management requirements also need to be evaluated before the package is committed to a multi-layer PCB. This page organizes the key device specifications, credible same-footprint alternatives, package constraints, and practical design considerations in one place. It also distinguishes directly interchangeable speed-grade choices from package-only ordering variants, helping engineers select a Virtex-4 LX device without overlooking bitstream, timing, temperature-grade, or PCB compatibility requirements.

RFC Hubungi kami
XC4VLX40-10FF668C - 41,472-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-10FF668C

XC4VLX40-10FF668C - 41,472-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-10FF668C is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 448 I/O positions, and a 668-ball FCBGA package. It uses CMOS fabrication technology and a 1.2 V core supply, while the -10 speed grade defines the target performance class. The device is designed for embedded systems requiring programmable parallel processing, high-speed connectivity, dedicated block RAM, and configurable DSP resources in a single integrated circuit. A field-programmable gate array is a digital semiconductor whose logic, interconnect, memory, and signal-processing blocks are configured after manufacture. In the product hierarchy, an FPGA is a programmable logic device within the broader semiconductor category. Virtex-4 LX devices combine configurable logic blocks with block RAM and DSP48 resources, allowing parallel algorithms, protocol interfaces, control logic, and data processing to be implemented in one device. The XC4VLX40 provides 41,472 logic cells and 448 I/O positions in a 668-FCBGA package measuring 27 mm by 27 mm. Its CMOS implementation operates from a 1.2 V core supply. The -10 designation identifies the device speed grade, providing a performance-oriented option for clocked datapaths and communication systems. Detailed electrical characteristics, configuration requirements, memory capacities, and supported I/O standards should be selected from the manufacturer datasheet tables using the exact ordering code. The Virtex-4 LX architecture is appropriate when several independent processing paths must operate concurrently. Configurable logic supports datapath control, while dedicated block RAM reduces the need for external memory in buffering, packet storage, and data-capture systems. DSP48 resources can accelerate multiply-accumulate operations involved in filtering, modulation, signal analysis, and fixed-point processing. The large 448-I/O interface also permits direct connection to high-speed memory, transceivers, converters, and board-level buses. Typical uses include telecommunications line-card control, industrial automation, high-speed data acquisition, network packet processing, test equipment, signal processing, and embedded control with substantial parallel logic. For a new Virtex-4 LX design, the XC4VLX40-11 variants may provide a different performance trade-off, while the XC4VLX40-10FFG668C provides the same device speed grade with a lead-free package option. Board design must preserve the BGA escape-routing and power-delivery requirements associated with a 668-ball FCBGA. Configuration storage, startup behavior, decoupling, clock integrity, and I/O voltage compatibility should be validated before schematic sign-off. Use the manufacturer pinout and board-design guidance when assigning every power, ground, configuration, clock, and user I/O connection. This product page combines the verified device identity, package information, lifecycle status, compatible ordering options, parameter comparisons, and practical implementation guidance. It is intended to accelerate initial component selection while preserving the need to check the complete manufacturer datasheet and design-support documents for a production release.

RFC Hubungi kami
XC4VLX40-10FF668I - 41,472-Cell -10 Virtex-4 LX FPGA | AMD
XC4VLX40-10FF668I

XC4VLX40-10FF668I - 41,472-Cell -10 Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-10FF668I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 1,769,472 RAM bits, and 448 I/O sites, operating from a 1.2 V supply in a 668-pin FCBGA package. The -10 suffix identifies the device speed grade, while the FF668I package designation identifies the 668-ball surface-mount configuration. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior is configured after fabrication. The Virtex-4 LX FPGA belongs to the broader FPGA and CPLD hierarchy and combines configurable logic blocks, block RAM, programmable I/O, dedicated multipliers, and high-speed serial transceivers. This makes it suitable for parallel processing, network interfaces, signal processing, control systems, and ASIC-prototype implementations. The XC4VLX40-10FF668I provides 41,472 logic cells organized into 4,608 logic blocks or configurable logic blocks. Its 1,769,472 RAM bits can support buffers, packet memories, lookup tables, filters, and embedded data storage. The device also offers 448 I/O and 176,9472-bit block RAM resources according to its product listing, providing substantial implementation capacity for connected embedded systems. Virtex-4 devices are available in -10, -11, and -12 speed grades, with -12 representing the highest performance grade and -10 the lower-speed option represented by this part. The architecture is based on CMOS FPGA technology and uses configurable logic blocks, dedicated block RAM, arithmetic resources, and programmable input/output structures rather than a fixed instruction set. Its large pin count supports extensive external connectivity and multi-component system integration. Typical applications include industrial networking equipment, telecommunications interfaces, video and image processing, instrumentation, embedded storage controllers, and ASIC prototyping. The 448 available I/O sites are especially useful where a design must connect multiple buses, memories, converters, and clock sources. Designers should also account for the device's large power requirement and the complex power, ground, decoupling, and configuration requirements of a 668-ball BGA implementation. For a new design, verify that the selected -10 speed grade satisfies the timing requirements and that the PCB supports the complete 668-pin FCBGA footprint, thermal design, configuration interface, and memory interfaces. A successful hardware design also requires rigorous signal-integrity analysis for high-speed interfaces and careful power-plane construction around this large, high-pin-count programmable device. This product summary combines the exact MPN identification, package information, logic and memory capacity, speed-grade context, drop-in alternatives, and PCB-oriented engineering guidance. It helps engineers distinguish the industrial -10 device from adjacent speed grades while focusing attention on the actual FPGA resource limits, pin count, power architecture, and board-level implementation constraints.

RFC Hubungi kami
XC4VLX40-11FF668C - 4608-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-11FF668C

XC4VLX40-11FF668C - 4608-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-11FF668C is a Virtex-4 LX field-programmable gate array with 4,608 logic cells, a -11 speed grade, and 668 ball-grid-array terminals. It is packaged in a 668-FBGA configuration and operates from 0°C to 85°C. The device provides programmable logic resources for demanding embedded systems requiring parallel processing, high-speed interfaces, and flexible hardware configuration. A field-programmable gate array is a semiconductor device whose digital functionality is defined after manufacture by loading a configuration bitstream. Within the product hierarchy, an FPGA is a programmable logic device, a type of digital integrated circuit and semiconductor. Virtex-4 LX devices combine configurable logic, block RAM, programmable input/output resources, and dedicated clock-management functions, making them suitable for systems where fixed-function ASIC economics or late hardware changes would be undesirable. The XC4VLX40-11FF668C provides 4,608 logic cells and supports an internal clock frequency listed as 1,028 MHz. Its -11 designation identifies the middle of the three documented Virtex-4 speed grades, which are -10, -11, and -12. The 668-FBGA package exposes 668 terminals and uses a square package form, allowing dense board-level integration without the mechanical footprint of a larger ball-grid array. The -11 speed grade balances performance and operating characteristics for general-purpose FPGA applications. Configuration data determines the implemented digital architecture, while dedicated resources can accelerate storage-intensive and interface-heavy designs. The listed operating range of 0°C to 85°C supports commercial-temperature equipment, while the large 668-terminal package provides substantial I/O and power-distribution connectivity. Typical uses include industrial control and automation, telecommunications equipment, high-speed data processing, test and measurement systems, embedded video infrastructure, and network-interface designs. The FPGA can implement parallel algorithms, protocol bridges, acquisition pipelines, and control logic in one reconfigurable device, reducing the number of surrounding discrete components when system requirements are expected to evolve. Board design requires careful attention to the 668-FBGA layout, including ball assignment, power and ground distribution, decoupling, configuration-interface routing, and thermal management. Use the AMD Virtex-4 package pinout files to assign every ball and verify the selected configuration, clock, and I/O standards before fabrication. Programming and timing closure should be completed with the ISE design tool flow appropriate for the Virtex-4 device family. This product page combines the exact ordering code, key device specifications, package information, same-footprint alternatives, and practical design guidance. It also distinguishes verified electrical and packaging facts from fields that still require confirmation from the AMD documentation, helping engineers plan replacement decisions without changing the PCB land pattern unnecessarily.

RFC Hubungi kami
XC4VLX40-11FF668I - 41,472-LC Virtex-4 LX FPGA | AMD
XC4VLX40-11FF668I

XC4VLX40-11FF668I - 41,472-LC Virtex-4 LX FPGA | AMD

The AMD/Xilinx XC4VLX40-11FF668I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, a -11 speed grade, and a 668-pin FCBGA package. It combines 4,608 configurable logic blocks with 448 I/O positions and operates from a 1.2 V core supply, making it suitable for high-density programmable logic, embedded DSP, and parallel interface systems. The device uses 90 nm CMOS fabrication and is specified for 0°C to 85°C operation. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. The FPGA hierarchy places this device in the Virtex-4 LX family, within the broader field-programmable logic and semiconductor categories. Unlike a fixed-function application-specific integrated circuit, an FPGA can support multiple interface standards, parallel processing architectures, and evolving system requirements without requiring a new physical layout. The XC4VLX40 provides 41,472 logic cells organized into 4,608 configurable logic blocks, with an internal frequency listed as 1,028 MHz. Its 448 I/O positions support substantial board-level connectivity, while the -11 speed designation identifies its performance class within the Virtex-4 lineup. The 668-pin FCBGA package supports dense external connectivity and is intended for multilayer PCB layouts with careful power, ground, and escape-routing planning. Technically, the device is a CMOS FPGA optimized for general-purpose programmable logic rather than a fixed digital signal processor. Its distributed architecture allows designers to instantiate parallel datapaths, state machines, interface bridges, protocol controllers, and custom accelerators. The 1.2 V core supply keeps device-level power requirements lower than many older FPGA architectures, although final board power depends on logic activity, I/O loading, speed grade, and selected I/O standards. Typical applications include industrial control systems, telecommunications interface modules, test and measurement instrumentation, embedded signal-processing systems, and legacy networking equipment. In a telecommunications design, the dense I/O and parallel logic capacity can support multiple buses and data paths. In industrial equipment, programmable logic can implement protocol conversion, acquisition control, and timing functions while retaining the flexibility of FPGA-based field updates. PCB design should follow the AMD package pinout files and the manufacturer’s power, decoupling, and thermal guidance. Place bypass capacitors near the supply pins, provide a low-impedance ground-plane structure, and route high-speed interfaces with controlled length and impedance. Because the 668-pin package has no corresponding diagram in the standard XAIPART package library, verify every ball assignment against the official AMD package file before fabrication. This page combines exact catalog identifiers, package information, application guidance, comparison criteria, and practical design considerations for engineers evaluating the XC4VLX40-11FF668I. It also distinguishes true same-footprint alternatives from parts that merely use a similar FPGA package or belong to a different package size.

RFC Hubungi kami
XC4VLX40-12FF668C - 41,472 Logic Cell -12 FPGA | AMD
XC4VLX40-12FF668C

XC4VLX40-12FF668C - 41,472 Logic Cell -12 FPGA | AMD

The AMD XC4VLX40-12FF668C is a Virtex-4 LX field-programmable gate array with 41,472 logic elements, 4,608 configurable logic blocks, 448 I/O, and a 1.2 V operating supply in a 668-BBGA package. The -12 designation identifies the highest-performance Virtex-4 speed grade in this family, while the listed internal frequency is 1,028 MHz. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. The XC4VLX40 belongs to the Virtex-4 LX hierarchy of FPGA and CPLD devices, combining programmable logic blocks, embedded block RAM, dedicated I/O, and clocking resources in one reconfigurable device. This makes it suitable for implementing parallel processing, interface bridging, protocol conversion, and embedded control functions without relying on fixed application-specific logic. Key device characteristics include 41,472 logic elements, 4,608 configurable logic blocks, 18,432 adaptive logic modules, 448 I/O, 1.69 Mbit of embedded memory, and a nominal 1.2 V supply. The -12 grade is specified for the highest performance among the Virtex-4 speed grades. Its commercial operating-temperature range is listed as 0°C to +85°C, making it appropriate for controlled commercial and industrial equipment environments. The device uses a 90 nm CMOS process and a 668-BBGA package. Its four-digit speed code is separate from the FF668 package identifier, so procurement and board design must distinguish the exact XC4VLX40-12FF668C ordering code from other speed grades and package variants. FPGA designs require configuration storage, initialization support, clock distribution, and careful high-speed routing around the BGA device. Typical uses include network interface adapters, test and measurement equipment, industrial protocol bridges, video processing pipelines, and high-throughput digital control systems. The 448 available I/O support connections to external memory, transceivers, converters, and clock sources, while the embedded memory provides dedicated on-chip storage for buffers, lookup tables, and data pipelines. Design planning should begin with the AMD Virtex-4 package pinout files and the device datasheet. Verify every power, ground, configuration, clock, and differential I/O connection against the exact package, provide suitable decoupling and multiple power rails, and confirm that the PCB stack-up supports the device's high-speed routing requirements before releasing the layout. This page combines device specifications, sourcing information, replacement considerations, application guidance, and PCB-level design notes. These engineering details help teams evaluate the XC4VLX40-12FF668C against related Virtex-4 devices while accounting for speed grade, package, thermal conditions, configuration requirements, and design-tool compatibility.

RFC Hubungi kami
XC4VLX60-10FF668C - 59,904-Cell FPGA | AMD Xilinx
XC4VLX60-10FF668C

XC4VLX60-10FF668C - 59,904-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX60-10FF668C is a Virtex-4 LX field-programmable gate array built on 90 nm CMOS technology, with 59,904 logic cells, 6,656 configurable logic blocks, 448 I/O sites, and a 668-pin FCBGA package. The -10 speed grade supports an internal clock frequency of 1,028 MHz, while the specified commercial operating-temperature range is 0°C to 85°C. These characteristics position the device for high-density parallel processing, embedded control, networking, signal processing, and communications systems requiring substantial programmable logic and I/O bandwidth. An FPGA is a reconfigurable digital semiconductor whose programmable logic blocks, routing fabric, block RAM, dedicated arithmetic resources, and input/output resources can be configured after manufacture. Within the device hierarchy, the XC4VLX60 belongs to the Virtex-4 LX FPGA family and combines configurable logic, embedded memory, DSP-oriented arithmetic blocks, high-speed serial connectivity, and programmable I/O. This combination allows a single device to implement parallel datapaths and control logic that would otherwise require multiple programmable devices. The principal features include 59,904 logic cells, 6,656 configurable logic blocks, 448 I/O, a 1,028 MHz internal frequency, and CMOS operation. The 668-ball FCBGA package supports dense PCB routing while requiring careful high-speed layout, power-plane design, via structure, and thermal analysis. The -10 suffix identifies the performance grade, while the FF668 suffix identifies the 668-pin package configuration and the C suffix identifies the commercial temperature grade. The XC4VLX60-10FF668C is architecturally a 90 nm CMOS FPGA built around an interconnected fabric of configurable logic blocks. Its 6,656 CLBs support parallel Boolean, arithmetic, control, and data-processing implementations. The 448 I/O provide substantial connectivity for external memories, transceivers, clocks, data converters, and communication peripherals. Because the device combines many high-speed domains, system timing closure depends on constrained clocking, correct I/O standards, and controlled impedance routing rather than function alone. Typical applications include high-throughput network packet processing, industrial automation and control, video and image pipelines, telecommunications equipment, test and measurement systems, and embedded signal-processing platforms. In these systems, the programmable architecture allows designers to change interfaces or algorithms without changing the PCB, while the large logic count supports parallel computation and the I/O count supports wide data buses. The primary design consideration is power and signal integrity. Designers should use the manufacturer's power-decoupling and pin-placement guidance, provide clean references and clocking, and constrain all high-speed interfaces. The 668-pin FCBGA also requires thermal-aware via placement and adequate copper spreading beneath the device to prevent localized heating from reducing timing performance or reliability. This product record combines the exact ordering information, logic density, package characteristics, speed grade, temperature range, and I/O count with practical guidance for FPGA migration, replacement assessment, high-speed PCB layout, and application selection. It also distinguishes same-footprint Virtex-4 LX alternatives by speed, temperature, and package suffix so engineers can identify changes that require design review rather than assuming every ordering code is interchangeable.

RFC Hubungi kami
XC4VLX60-10FF668I - 59,904-Cell 90nm FPGA | AMD | FBGA-668
XC4VLX60-10FF668I

XC4VLX60-10FF668I - 59,904-Cell 90nm FPGA | AMD | FBGA-668

The AMD XC4VLX60-10FF668I is a Virtex-4 LX field-programmable gate array with 59,904 logic cells, 448 I/O sites, and a 668-ball FCBGA package. Built on 90 nm CMOS technology and powered from 1.2 V, it targets complex fixed-function logic, interface bridging, DSP, networking, telecommunications, and industrial control systems requiring substantial parallel programmable resources. An FPGA is a semiconductor whose digital behavior is defined after manufacture through a configuration bitstream. Within the product hierarchy, this device is an FPGA and programmable logic device, combining configurable logic blocks, block RAM, dedicated DSP resources, programmable I/O, and clock-management circuitry. The Virtex-4 LX architecture provides a unified fabric for implementing parallel datapaths and control logic rather than relying on several discrete logic devices. Key device attributes include 59,904 logic cells, 448 I/O, 26,624 adaptive logic modules, 2.81 Mbit of embedded memory, 90 nm CMOS construction, and a 1.2 V supply. The -10 speed grade targets the lower-performance end of the Virtex-4 LX range, while the industrial I suffix identifies operation from 0°C to 85°C. The 668-ball FCBGA package supports dense board integration but requires careful via-in-pad, solder-mask, and thermal design. The part's 59,904 logic cells provide substantially more parallel capacity than small CPLDs, while its 448 I/O sites support high-pin-count interfaces. Embedded memory supports packet buffering, frame storage, lookup functions, and data-plane buffering. Dedicated DSP arithmetic and selectable clocking help implement fixed-point signal processing, serializers, and multi-clock systems without relying entirely on soft processors. Typical uses include telecommunications line cards, industrial automation, data acquisition, video processing, network equipment, and embedded control. For high-speed memory interfaces or external buses, designers must implement timing constraints, clocking, and I/O standards correctly. Firmware development should account for configuration storage, startup sequencing, JTAG access, and the effect of board-level signal integrity on the 668-ball package. For a new design, first verify the bitstream targets the exact device and speed grade. Use AMD package pinout files and the Virtex-4 documentation to assign every ball, and confirm power, decoupling, clock, configuration, and JTAG requirements. Existing legacy designs should also review tool-chain support and long-term availability before committing to a new production run. This page combines device specifications, package-level engineering guidance, lifecycle considerations, comparison parameters, and practical drop-in alternatives. These details help engineers distinguish speed-grade, temperature-grade, and lead-free ordering variants before making a board-level replacement decision.

RFC Hubungi kami
XC4VLX60-11FF668C - 59,904-Cell -11 Virtex-4 LX FPGA | AMD
XC4VLX60-11FF668C

XC4VLX60-11FF668C - 59,904-Cell -11 Virtex-4 LX FPGA | AMD

The AMD/Xilinx XC4VLX60-11FF668C is a Virtex-4 LX field-programmable gate array built on 90 nm CMOS technology, providing 59,904 logic cells, 448 I/O, and a nominal 1.2 V core supply in a 668-pin FCBGA package. The -11 speed grade targets designs requiring a balanced combination of logic density, routing capacity, and performance. A field-programmable gate array is a programmable digital semiconductor whose configuration memory defines interconnect paths and logic behavior after manufacture. The Virtex-4 LX FPGA belongs to the broader FPGA hierarchy, combining configurable logic blocks, programmable routing, block RAM, dedicated arithmetic resources, input/output blocks, and clock-management circuitry. This makes the device suitable when a design must support parallel signal processing, protocol bridging, programmable control, or high-density digital logic. The XC4VLX60-11FF668C provides 59,904 logic cells, 6,656 logic blocks, 448 I/O, and an internal clock figure of 1,028 MHz. Its 668-pin FCBGA package supports the substantial pin and power requirements of the device. The commercial C grade is specified for 0°C to 85°C operation, while the 90 nm CMOS process and 1.2 V core supply identify this part as a high-density FPGA from the Virtex-4 generation. Its architecture allows multiple digital functions to be implemented in parallel rather than executed sequentially by a general-purpose processor. Dedicated block RAM supports data buffering, while programmable I/O can accommodate high-speed interfaces and external control buses. Internal frequency is a device figure rather than the guaranteed performance of every user design; final interface timing depends on logic placement, routing, clocking, I/O standards, speed grade, board-level timing, and the selected I/O implementation. Typical uses include industrial automation, telecommunications, networking infrastructure, test and measurement, high-speed data acquisition, embedded signal processing, and control systems requiring deterministic parallel hardware. The large logic capacity can consolidate multiple fixed-function circuits into one programmable device, while 448 I/O provide substantial connectivity for external memories, transceivers, clocks, and data buses. Board design must follow the AMD package pinout and power-supply requirements for the FCBGA package. Decoupling, controlled ramp sequencing, signal-integrity routing, thermal management, and configuration-memory implementation are as important as the FPGA logic itself. Confirm the exact package drawings, ball assignments, and recommended power architecture before layout release. This product page consolidates the device identity, package characteristics, speed-grade distinctions, verified drop-in candidates, and practical selection considerations. It also distinguishes commercial, industrial, and alternative speed-grade options that share the same physical footprint, helping engineers evaluate replacement feasibility without confusing a pin-compatible variant with an unqualified functional substitute.

RFC Hubungi kami