Produk (46,000+)

XC3S50-4VQ100C - 50K Spartan-3 FPGA | AMD | 100-TQFP
XC3S50-4VQ100C

XC3S50-4VQ100C - 50K Spartan-3 FPGA | AMD | 100-TQFP

The AMD/Xilinx XC3S50-4VQ100C is a 50,000-system-gate Spartan-3 field-programmable gate array with 1,728 logic cells, 63 I/O, a 1.2 V core supply, and a -4 speed grade, supplied in a 100-TQFP package. This commercial-temperature FPGA is positioned for compact, cost-sensitive embedded logic, control, and interface designs. A field-programmable gate array is a semiconductor whose logic fabric, programmable interconnect, and I/O blocks can be configured after manufacture. The XC3S50-4VQ100C belongs to the Spartan-3 FPGA family, combining configurable logic resources with dedicated digital input/output capability in a low-density package suitable for space-constrained designs. The verified device information identifies 50,000 system gates, 1,728 logic cells, 63 I/O, and a maximum stated clock frequency of 630 MHz. The -4 suffix denotes the performance grade, while VQ100 identifies the 100-pin package. The core supply is listed as 1.2 V, with an operating supply range of 1.14 V to 1.26 V and a commercial junction-temperature range of 0°C to 85°C. Unlike an application-specific integrated circuit, this FPGA permits configuration changes during development and production. That flexibility supports parallel data paths, state machines, protocol bridging, control logic, and small embedded processing systems. Its 100-pin TQFP package also exposes more general-purpose I/O than lower-density packages, although exact bank voltage, input threshold, and pin-specific capabilities require the official device documentation. Typical applications include industrial control, telecommunications support logic, consumer electronics, and compact embedded systems. The 1.2 V core makes board-level power planning important: designers should provide stable, decoupled core rails and use compatible external I/O standards according to the selected bank configuration. Tool-chain, configuration-memory, and legacy-device considerations should also be reviewed before committing a new production design. For an existing 100-TQFP Spartan-3 PCB, a replacement must be checked for exact speed grade, temperature grade, pin mapping, supply requirements, I/O standards, configuration interface, and programming-file compatibility. This page combines verified distributor specifications with practical selection, sourcing, and migration guidance rather than relying only on a catalog description.

RFC Hubungi kami
XC3S50-4VQ100I - 50K Gate Spartan-3 FPGA | AMD
XC3S50-4VQ100I

XC3S50-4VQ100I - 50K Gate Spartan-3 FPGA | AMD

The AMD XC3S50-4VQ100I is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 63 user I/Os, and a 1.2 V core supply in a 100-pin VTQFP package. The -4 suffix identifies the device speed grade, while the I suffix identifies the industrial-temperature option. Verified distributor listings identify the device as a 100-TQFP FPGA, and other supplied technical listings identify its process technology as 90 nm and maximum clocking as 630 MHz. An FPGA is a programmable semiconductor in the semiconductor and digital-logic hierarchy. Its configurable logic blocks, programmable interconnect, block RAM, and I/O resources let engineers implement parallel data paths, control logic, signal processing, and system interfaces in one device. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development and field updates when the architecture permits it. The XC3S50 provides 1,728 logic cells and 50,000 system gates, making it suited to compact control, interface, communications, instrumentation, and embedded-logic designs. Its 63 user I/Os provide connections for digital control, status, clocks, data buses, and serial peripherals. A 1.2 V core operating voltage reduces system power requirements, while the listed 2.5 V and 3.3 V supplies support associated I/O requirements where those supply rails are applicable to the selected configuration. The Spartan-3 architecture is intended for cost-sensitive designs that require programmable hardware without the resource level of a larger FPGA. The supplied data reports 90 nm process technology and a 630 MHz device figure, but achievable system timing remains design-dependent. External memory interfaces, clocking, constraints, I/O standards, routing congestion, and timing closure determine actual system performance rather than a single advertised device frequency. Typical uses include industrial automation, test and measurement, consumer electronics, communications control, embedded instrumentation, and general-purpose digital signal processing. Because this is an older FPGA family, engineers should confirm tool support, stock, lifecycle status, configuration-device support, and the exact pinout before beginning a new production design. The verified data does not establish whether it is currently active or discontinued. PCB design must preserve the 100-pin package footprint and exact I/O assignments. Decoupling, configuration startup, clock routing, I/O standards, and signal-integrity constraints should follow the relevant Xilinx or AMD device documentation. Do not treat the conflicting package descriptions in secondary listings as authoritative; the target is identified as a 100-pin TQFP/VTQFP device. This page combines verified distributor specifications, cross-reference findings, practical design guidance, and candid limitations. It distinguishes confirmed values from missing technical data so procurement and engineering teams can evaluate the FPGA without conflating package variants or assuming compatibility that the supplied evidence does not establish.

RFC Hubungi kami
XC3S50-4VQG100C - 50K Spartan-3 FPGA | Xilinx | 100-TQFP
XC3S50-4VQG100C

XC3S50-4VQG100C - 50K Spartan-3 FPGA | Xilinx | 100-TQFP

The Xilinx XC3S50-4VQG100C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,584 logic cells, a -4 speed grade, and a 1.2 V supply in a 100-pin TQFP package. The device belongs to the Spartan-3 FPGA family and provides configurable logic, block RAM, and programmable I/O for embedded control, digital signal processing, prototyping, and general-purpose hardware acceleration. A field-programmable gate array is a semiconductor whose digital logic and interconnect can be configured after fabrication. Within the technology hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3 family targets cost-sensitive designs requiring more capability than basic programmable logic devices while maintaining relatively low system complexity. The XC3S50-4VQG100C combines 50,000 system gates with 72 Kb of block RAM and a stated 630 MHz performance figure. The principal device features include 90 nm fabrication technology, 1.2 V core voltage, a 100-pin TQFP package, and a -4 performance designation. Its 1,584 logic cells provide parallel hardware resources for control logic, data acquisition, communications, and signal-processing functions. The available distributor records identify a 0°C to 85°C commercial operating-temperature range, while exact I/O counts, supported I/O standards, and detailed timing constraints require confirmation in the manufacturer documentation. Spartan-3 devices use configurable logic blocks, programmable interconnect, and block RAM to implement digital systems. This architecture allows parallel datapaths and state-machine logic to execute concurrently instead of relying on sequential software instructions. The -4 speed grade identifies a specific performance class within the Spartan-3 family, but clocking and I/O timing must be evaluated against the design's actual constraints and the selected device documentation. Typical uses include industrial control, instrument interfaces, industrial communications, educational FPGA platforms, digital signal processing, and low-cost embedded systems. The 100-pin package also makes the device suitable for boards that need a meaningful number of I/O without moving to a large ball-grid-array package. Designers should verify voltage-tolerant I/O, differential I/O availability, pin constraints, and board-level power requirements before schematic capture. A primary design consideration is decoupling around the 1.2 V core and any supported I/O supplies. Place the required capacitors close to their supply pins, route high-current paths with low loop area, and use an FPGA-supported configuration scheme and clock source. Because this is an older FPGA family, toolchain availability, programming-file support, and the selected package’s exact pin map should be confirmed before committing a new design to production. This product page combines verified distributor specifications, an honest assessment of drop-in alternatives, package and sourcing information, and practical design guidance to support faster engineering evaluation while clearly identifying details that still require manufacturer-documentation verification.

RFC Hubungi kami
XC3S50-4VQG100I - 50K Spartan-3 FPGA, 1.2V, 100-TQFP | AMD
XC3S50-4VQG100I

XC3S50-4VQG100I - 50K Spartan-3 FPGA, 1.2V, 100-TQFP | AMD

The AMD XC3S50-4VQG100I is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 192 logic blocks, and 63 I/O pins, operating from a 1.2 V core supply in a 100-pin TQFP package. The device is identified as a 4-speed-grade Spartan-3 FPGA, with a reported maximum operating frequency of 630 MHz. It is intended for compact, cost-sensitive programmable-logic designs requiring moderate logic density and a moderate pin count. A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnects, and I/O resources into a single integrated circuit. FPGAs sit within the broader semiconductor hierarchy: FPGA -> programmable logic device -> digital logic IC. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured after manufacture, allowing designers to implement parallel logic, control, data acquisition, communication, and embedded system functions in one device. The XC3S50-4VQG100I provides 1,728 logic cells and 63 user I/O pins according to the verified distributor and comparison data. The 1.2 V core supply and 90 nm process technology place the device in the Spartan-3 generation of AMD/Xilinx programmable logic. Its 100-pin surface-mount package provides a smaller footprint than higher-pin-count Spartan-3 devices while retaining enough I/O for control, interface, and low-to-moderate-speed parallel systems. The listed lead-free packaging designation is suitable for modern manufacturing processes, although individual procurement channels should be checked for current stock and traceability. The -4 designation identifies the device performance grade within the Spartan-3 naming system, while the I suffix identifies the industrial-temperature configuration. Verified cross-reference information lists an industrial operating range of -40 °C to +100 °C for this part. The 630 MHz figure is a device-family or comparison value and should not be treated as a guarantee that every design or I/O interface will operate at that frequency. Actual timing performance depends on the selected Spartan-3 device, clocking, I/O standards, logic utilization, routing, and timing constraints. Typical uses include industrial control logic, sensor and signal conditioning, communication interfaces, test equipment, embedded control, consumer electronics, and general-purpose prototyping. Because the FPGA is programmable, designers can implement parallel datapaths, state machines, protocol controllers, or custom interfaces without designing a fixed ASIC. The 63 I/O count is particularly useful for designs requiring multiple digital control or status signals while keeping the package reasonably compact. The main design consideration is package and pin planning. This page synthesizes verified distributor specifications, source links, and practical selection guidance; it does not invent pin functions or timing details. Before layout, engineers should obtain the official Spartan-3 family documentation and confirm the exact VQG100 pin map, bank voltages, configuration requirements, decoupling recommendations, and supported I/O standards for the selected board design. For replacements, the XC3S50-4VQG100C and related 100-pin Spartan-3 devices can be considered as same-footprint candidates where temperature grade, speed grade, device revision, and configuration details are acceptable. The XC3S50A-4VQG100I is a Spartan-3A-family option with related package information, but Spartan-3 and Spartan-3A devices should not be treated as automatically interchangeable without checking the complete pinout, configuration interface, electrical characteristics, and design-tool support.

RFC Hubungi kami
XC3S50-5CPG132C - 50K Spartan-3 FPGA | AMD | 132-CSPBGA
XC3S50-5CPG132C

XC3S50-5CPG132C - 50K Spartan-3 FPGA | AMD | 132-CSPBGA

The AMD XC3S50-5CPG132C is a Spartan-3 field-programmable gate array with 50K gates, 1,728 logic cells, 89 programmable I/O pins, and a 725 MHz stated operating frequency in a 132-TFBGA CSPBGA package. It uses 90 nm FPGA technology and operates from a 1.2 V core supply whose verified operating range is 1.14 V to 1.26 V. The device is a surface-mount, ball-grid package device with 132 terminals and a 0°C to 85°C junction-temperature range. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnect, and I/O behavior can be configured after manufacture. Within the product hierarchy, the XC3S50 belongs to the Spartan-3 FPGA family and combines programmable logic, block RAM, dedicated I/O, and configurable digital interfaces on one device. This makes it suitable when designers need hardware-level parallelism and field-updatable control logic rather than a fixed instruction sequence in a microcontroller. The 50K-gate designation identifies the device as the smallest member of the supplied Spartan-3 family information, while the 1,728 logic cells provide the usable programmable-logic resource count. Its 89 programmable I/O pins provide connections to external logic, memory, communications, and control circuitry. The -5 speed designation corresponds to the verified 725 MHz figure, while the CPG132 suffix identifies the 132-ball CSPBGA package used for compact surface-mount designs. The 90 nm process generation places this device in a mature FPGA architecture whose implementation resources and toolchain are established rather than new. The 1.2 V core operation can simplify power architecture compared with older, higher-voltage programmable devices, although the board still needs regulated supplies, decoupling, configuration storage, and correct ball-grid layout support. Exact RAM, I/O-standard, timing, and configuration-memory details were not present in the supplied data and should be confirmed in the manufacturer documentation. Typical uses include industrial control, compact communication interfaces, sensor and instrumentation logic, embedded display or networking controllers, and low-cost embedded systems requiring configurable parallel processing. The 89 I/O pins are especially useful for connecting the FPGA directly to bus transceivers, memory, status indicators, and external converters. Designers should select the Spartan-3 family only when its verified logic capacity and I/O resources satisfy the design rather than assuming equivalent capacity from a different FPGA family. Board planning must preserve the CSPBGA footprint, power rails, decoupling network, configuration interface, and exposed thermal behavior. Because the supplied data does not provide the complete 132-ball pin map, engineers should download the applicable Spartan-3 documentation and compare every ball assignment before routing or replacing the component. Legacy availability and tooling compatibility should also be confirmed before a new production design is committed. This page consolidates the verified distributor specifications, package data, temperature range, pricing-status limitations, and documented same-family alternatives. It also adds practical migration guidance, parameter comparisons, and explicit identification of data that remains unavailable, providing engineering context beyond a basic distributor listing while avoiding unsupported assumptions about legacy FPGA pin compatibility.

RFC Hubungi kami
XC3S50-5TQG144C - 50K Spartan-3 FPGA | AMD | 144-TQFP
XC3S50-5TQG144C

XC3S50-5TQG144C - 50K Spartan-3 FPGA | AMD | 144-TQFP

The AMD XC3S50-5TQG144C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 97 I/O, a 1.2 V core supply, and a 144-pin TQFP package. Rated at up to 725 MHz, it targets compact programmable-logic designs that require more I/O and processing capacity than small CPLDs can provide. A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3 family combines configurable logic blocks, programmable I/O, embedded block RAM, dedicated multipliers, and clock-management resources, allowing one device to implement control logic, data processing, interfaces, and small embedded systems. The XC3S50-5TQG144C combines 50,000 system gates with 1,728 logic cells and 97 available I/O in a 144-lead TQFP package. Its 1.2 V core supply reduces core power requirements, while the -5 speed designation corresponds to the 725 MHz maximum figure reported in the supplied product data. The commercial temperature range shown by the verified listings is 0°C to 85°C. This device is manufactured using 90 nm technology, positioning it as a cost-oriented, low-density FPGA rather than a high-performance FPGA with large on-chip memories. Configuration data programs the logic fabric and I/O standards, allowing hardware revisions and field updates without changing the printed circuit board. Because the package exposes many I/O in a relatively compact surface-mount format, PCB routing and power delivery remain central design constraints. Typical uses include industrial control, consumer electronics, embedded systems, communications interfaces, instrumentation, and general-purpose digital logic. Its 97 I/O make it particularly useful where external memory, parallel buses, status indicators, sensors, or multiple digital interfaces must connect to programmable logic. The 144-pin package also offers more I/O than a small PLD while remaining manageable for multilayer board assembly. Designers should verify the exact pinout, configuration interface, supported I/O standards, bank supply voltages, and decoupling requirements against the Spartan-3 manufacturer documentation before layout release. Because this is a legacy programmable-logic platform, toolchain availability, configuration-device compatibility, and long-term procurement should be confirmed during product planning. This page consolidates the verified distributor specifications, practical design considerations, and carefully qualified same-footprint alternatives for XC3S50-5TQG144C. It also distinguishes documented production options from unavailable or unverified engineering data so engineers can make a defensible sourcing and design decision.

RFC Hubungi kami
XC3S50-5VQG100C - 50K Gate Spartan-3 FPGA | AMD
XC3S50-5VQG100C

XC3S50-5VQG100C - 50K Gate Spartan-3 FPGA | AMD

AMD XC3S50-5VQG100C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 63 programmable I/O pins, and a 1.2 V core supply in a 100-pin VTQFP package. It uses 90 nm CMOS technology and is rated for a maximum clock frequency of 725 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and I/O can be configured after fabrication. In the device hierarchy, an FPGA is a programmable logic device, followed by the broader categories of semiconductor, integrated circuit, and digital logic. Spartan-3 devices combine configurable logic blocks, distributed memory, dedicated input/output structures, and clocking resources in a single package. The XC3S50-5VQG100C provides 73,728 bits of distributed RAM and 192 logic array blocks, making its internal resources suitable for modest control systems, interface conditioning, signal processing, and embedded logic. Its 63 configurable I/O pins provide external connectivity, while the -5 speed designation corresponds to the verified 725 MHz maximum frequency. The 100-pin VTQFP package supports compact surface-mount PCB layouts. The Spartan-3 architecture uses a 90 nm process and a 1.2 V internal core voltage. Distributed RAM provides storage alongside configurable logic, allowing small lookup tables, buffers, and state machines to be implemented without relying entirely on external memory. Designers must also account for dedicated configuration pins, clock routing, power-supply sequencing, and the fixed resources assigned to configuration when planning the pinout. Typical uses include industrial control logic, low-cost embedded control, data acquisition, communication-interface bridging, instrumentation, and consumer electronics. The component is appropriate when a relatively small amount of parallel logic, moderate I/O connectivity, and programmable functionality are needed without moving to a larger FPGA. The primary design consideration is package and power planning. A 100-pin VTQFP layout is sensitive to thermal via placement and power-distribution integrity, while the 1.2 V core rail requires clean supply delivery. Configuration logic should also be preserved according to the manufacturer's guidance because its pins may not be freely available for ordinary user functions. This page combines the verified distributor specifications, package details, lifecycle caveat, drop-in replacement analysis, and practical design guidance for engineers evaluating the AMD Spartan-3 XC3S50-5VQG100C.

RFC Hubungi kami
XC3S5000-4FG676C - 5M Gate Spartan-3 FPGA, 676-BGA | Xilinx
XC3S5000-4FG676C

XC3S5000-4FG676C - 5M Gate Spartan-3 FPGA, 676-BGA | Xilinx

The Xilinx XC3S5000-4FG676C is a 5-million system-gate Spartan-3 field-programmable gate array (FPGA) packaged in a 676-ball fine-pitch ball grid array, delivering 74,880 logic cells, 1,728 Kbits of block RAM, 104 dedicated 18x18 multipliers, 4 digital clock managers and up to 489 user I/O pins. A field-programmable gate array is a reconfigurable digital semiconductor: an FPGA contains an array of programmable logic blocks, block RAM, dedicated multipliers and programmable I/O, so a design is implemented by writing a bitstream into on-chip configuration memory rather than fabricating a custom ASIC mask set. In the device hierarchy, an FPGA sits above a programmable logic device (PLD) and a fixed-function logic IC, and below an ASIC, inside the broader category of programmable logic semiconductors. Key features of this device include a -4 speed grade for higher performance timing, a commercial temperature option indicated by the C suffix, 676 ball-grid-array package balls providing 489 available user I/O in the FGG676 variant, 4 DCMs for clock generation, de-skew and jitter removal, and 104 18x18 signed multipliers for DSP-style multiply-accumulate work without external DSP chips. The device belongs to the Spartan-3 cost-optimized family, which was designed for high-volume consumer and industrial electronics. Technically, the XC3S5000-4FG676C couples configurable logic slices with dedicated arithmetic and memory resources so that filter, correlation, protocol and control functions can be consolidated in one device. The DCMs generate four-phase and divided clocks on-chip, which reduces external clock-tree components and simplifies timing closure in designs with multiple clock domains. Configuration is loaded from an external non-volatile memory or a processor bus through the standard serial or parallel configuration ports. Typical applications include industrial control and factory automation, video and image processing, network packet handling, instrumentation and test equipment, embedded consumer products, and digital signal conditioning in communication equipment. The large logic-cell count and 489 available user I/Os suit designs that need parallel parallel-bus interfaces, multiple data converters, or wide video capture and processing paths. One design consideration is that the 676-ball FBGA is a fine-pitch, lead-free-intensive package that requires careful PCB layout with solid ground and power planes, controlled-length configuration traces and Xilinx-recommended decoupling. Design for the -4 speed grade timing constraints, and verify that the target board uses the same 676-ball footprint and ball map if you intend to migrate between the FG, FGG, I and C suffix variants. This page consolidates device specifications, drop-in package-compatible alternatives, a parameter-by-parameter comparison and practical layout and configuration guidance into a single engineering reference for engineers evaluating the Spartan-3 XC3S5000 in production designs.

RFC Hubungi kami
XC3S5000-4FG676I - 5M-Gate Spartan-3 FPGA | Xilinx
XC3S5000-4FG676I

XC3S5000-4FG676I - 5M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-4FG676I is a Spartan-3 field-programmable gate array with 5 million system gates, 74,880 logic cells, up to 489 I/O, and a 630 MHz maximum clock in a 676-pin FBGA package. The -4 speed grade targets demanding FPGA designs, while the industrial-temperature I suffix supports junction temperatures from -40°C to 100°C. Manufactured using 90 nm SRAM FPGA technology, the device combines configurable logic, dedicated hardware resources, programmable I/O, and embedded block RAM in one package. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy: FPGA → field-programmable gate array → programmable logic device → semiconductor. Instead of implementing a fixed function with hardwired gates, the Spartan-3 architecture combines configurable logic blocks with programmable interconnect. This makes the device suitable for parallel processing, protocol bridging, control logic, signal acquisition, and embedded systems whose algorithms may evolve after design release. The XC3S5000-4FG676I provides 5 million system gates and 74,880 logic cells, with up to 489 I/O available through the 676-ball package. Its 630 MHz maximum clock supports demanding timing designs, while the 90 nm fabrication process and 1.2 V supply characterize this generation of programmable logic. The broad I/O count allows systems to connect substantial external memory, data converters, communications transceivers, and industrial interfaces without an external interface controller. Spartan-3 devices use configurable logic blocks, programmable routing resources, dedicated multipliers, block RAM, digital clock management, and programmable I/O blocks. The -4 designation identifies the performance grade, FG676 identifies the package configuration, and I identifies the industrial temperature option. Exact pin functions, differential-I/O capabilities, supported standards, and configuration requirements must be checked against the device pinout and the AMD/Xilinx DS099 family documentation before layout or firmware implementation. Typical applications include industrial control, telecommunications line-card and interface logic, high-speed data acquisition, digital signal processing, embedded video processing, storage controllers, and test-and-measurement equipment. The large logic capacity allows parallel datapaths and multi-channel processing, while the high I/O count supports memory-heavy and multi-interface designs. The 630 MHz ceiling provides substantial timing headroom for clocked pipelines, provided timing constraints, clocking, and physical implementation meet the design targets. A critical design consideration is that FPGA migration depends on exact package balls, configuration pins, supply sequencing, bank voltages, and supported I/O standards. A device with the same gate count is not automatically interchangeable unless its package ballout and electrical constraints are verified. Use the AMD/Xilinx DS099 Spartan-3 FPGA Family data sheet for the authoritative pin and parameter definitions, and validate the selected board configuration with the final bitstream and timing analysis. This product page consolidates the verified device identity, core resource figures, package information, design constraints, application guidance, and a validated same-package alternative candidate. It also distinguishes documented parameters from attributes that still require device-specific review, helping engineers identify whether the XC3S5000-4FG676I fits a legacy design before committing to sourcing or board rework.

RFC Hubungi kami
XC3S5000-4FG900C - 5M Gate Spartan-3 FPGA | Xilinx
XC3S5000-4FG900C

XC3S5000-4FG900C - 5M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-4FG900C is a Spartan-3 field-programmable gate array with 5,000,000 system gates, 74,880 logic cells, 633 user I/Os, and a 630 MHz maximum clock rating in a 900-ball FBGA package. The device operates from a 1.2 V core supply and uses 90 nm fabrication technology. An FPGA is a semiconductor whose internal logic, routing, and I/O blocks are configured after manufacture. The FPGA hierarchy progresses from configurable logic blocks and programmable interconnect to a field-programmable gate array and then to a digital integrated circuit. This allows one physical device to implement digital control logic, interface protocols, signal processing, or embedded systems that would otherwise require several application-specific ICs. The Spartan-3 architecture supports a large fabric of 74,880 logic cells and 5 million system gates, making it suitable for designs with substantial parallel logic. Its 633 user I/Os provide connections to external memories, clocks, control signals, communications links, and mixed-signal systems. The -4 speed grade and commercial-temperature designation identify the device's performance and operating classifications, while the 900-ball FBGA supports dense PCB routing in high-pin-count systems. The XC3S5000 belongs to the Spartan-3 family, whose architecture uses configurable logic blocks, programmable routing, block RAM, dedicated multipliers, and programmable input/output resources. Unlike a fixed-function ASIC or mask-programmed device, the same FPGA can be reused for different logic functions when its configuration bitstream changes. The 90 nm process and 1.2 V core voltage position the device as a high-density, cost-oriented FPGA platform. Typical applications include industrial control systems, communications infrastructure, instrumentation, embedded processors, video and image processing, test equipment, and interface consolidation. Its 633 available I/Os are particularly useful when a design must bridge multiple external buses, memory devices, and control peripherals without using several discrete logic devices. Before layout, verify the exact 900-ball land pattern, power requirements, decoupling recommendations, configuration interface, and supported I/O standards in the manufacturer datasheet. Use the pin-definition tables and package drawings as the authority for PCB implementation, and include thermal and power-budget analysis in the final system design. This page combines the core Spartan-3 electrical and packaging characteristics with application guidance, compatibility-focused alternatives, comparison data, and practical design notes. It is intended to help engineers evaluate capacity, pin requirements, package implementation, and family-level replacement options before beginning a new FPGA design.

RFC Hubungi kami
XC3S5000-4FG900I - 5M Gate Spartan-3 FPGA | AMD
XC3S5000-4FG900I

XC3S5000-4FG900I - 5M Gate Spartan-3 FPGA | AMD

AMD Xilinx XC3S5000-4FG900I is a Spartan-3 field-programmable gate array with 5,000,000 system gates, 74,880 logic cells, 633 I/O, and up to 630 MHz performance in a 900-ball FBGA package. A field-programmable gate array, or FPGA, is a programmable digital logic device in which configurable logic blocks, programmable input/output resources, and internal interconnect are arranged to implement application-specific digital functions. An FPGA belongs to the broader semiconductor hierarchy of programmable logic devices and is commonly selected when parallel processing, flexible hardware updates, or dedicated interface logic justify a higher pin count than a small microcontroller or CPLD can provide. The XC3S5000-4FG900I represents the highest-density device in the Spartan-3 family. Its 5 million system gates and 74,880 logic cells provide substantial capacity for parallel data processing, control logic, protocol bridges, and embedded systems. The device uses 90 nm fabrication technology and a 1.2 V core supply. Its -4 designation identifies a specific speed grade, while the 900-ball package supports a large interface count and extensive I/O capability. The 633-I/O configuration makes this FPGA suitable for systems that need multiple high-speed interfaces, wide parallel buses, or substantial external connectivity. Compared with a discrete fixed-function ASIC, the Spartan-3 architecture permits logic changes through configuration rather than a silicon respin. The tradeoff is that configuration storage, tool support, power consumption, and PCB complexity must be considered in addition to raw logic capacity. Typical uses include communications equipment, industrial control, video and image processing, test equipment, embedded storage systems, and high-volume prototype or production logic platforms. Its large 900-ball FBGA footprint is appropriate for multilayer PCB designs with dense routing, careful power delivery, and controlled thermal performance. When planning a replacement or new design, verify the complete pinout, configuration interface, supported I/O standards, clock requirements, and core voltage sequencing against the manufacturer datasheet. Do not assume that another 900-ball Spartan-3 device is interchangeable solely because it uses a similar package; device density, speed grade, temperature grade, and pin functions must all be checked. This product record combines the identified Spartan-3 electrical and packaging characteristics with engineering-focused comparison information, drop-in replacement constraints, and practical PCB considerations. It helps distinguish a true same-footprint replacement from a merely similar FPGA that would require design changes.

RFC Hubungi kami
XC3S5000-4FGG676C - 5M Gate Spartan-3 FPGA | AMD
XC3S5000-4FGG676C

XC3S5000-4FGG676C - 5M Gate Spartan-3 FPGA | AMD

The AMD XC3S5000-4FGG676C is a high-density Spartan-3 FPGA with 5 million system gates, 74,880 logic cells, and up to 784 user I/Os, packaged in a lead-free 676-pin FBGA. It uses a 90 nm CMOS process and supports a 1.2 V core supply, making it suitable for cost-sensitive embedded systems that require substantial parallel processing capacity in a single device. A field-programmable gate array is a programmable digital integrated circuit that combines configurable logic blocks, dedicated hardware resources, programmable I/O, and embedded memory. The Spartan-3 FPGA family occupies the logical hierarchy of programmable logic device > FPGA > integrated circuit, combining the flexibility of software-programmable logic with predictable hardware timing and parallel I/O. The device provides 19,200 configurable logic blocks, equivalent to 74,880 logic cells, and includes 5,184 kbits of block RAM for buffering, packet storage, and data acquisition. Its four dedicated clock-management resources support clock generation, jitter attenuation, and phase-shift control. The listed operating-temperature range is 0°C to 85°C, and the -4 speed grade is intended for performance-oriented designs within the Spartan-3 family. The 676-pin FBGA exposes a large I/O complement, allowing interfaces to parallel sensors, memory devices, communications controllers, and general-purpose buses without external multiplexing logic. Because this is a BGA package, correct land pattern design, assembly process control, and thermal management are essential. Configuration data and the active configuration interface must also be supported by the system design during power-up and operation. Typical uses include industrial control, video and image processing, communications infrastructure, instrumentation, test equipment, and embedded consumer electronics. Its large logic and memory resources suit designs that benefit from parallel data paths, such as packet handling, signal conditioning, protocol conversion, and real-time control rather than sequential processor workloads. For new Spartan-3-compatible designs, verify the pinout, configuration interface, supported I/O standards, clock requirements, and memory interfaces against the manufacturer datasheet before layout. Existing XC3S5000-4FGG676C boards can use the same-package XC3S5000-4FGG676I where its industrial temperature range is suitable, but a timing-grade, temperature-grade, or density change should be treated as a design-review item rather than an automatic substitution.

RFC Hubungi kami
XC3S5000-5FG676C - 5M Gate Spartan-3 FPGA | AMD/Xilinx
XC3S5000-5FG676C

XC3S5000-5FG676C - 5M Gate Spartan-3 FPGA | AMD/Xilinx

The AMD/Xilinx XC3S5000-5FG676C is a Spartan-3 field-programmable gate array with 5 million system gates, 74,880 logic cells, and a maximum stated operating frequency of 725 MHz. The device uses 90 nm process technology, operates from a 1.2 V core supply, and is packaged in a 676-pin fine-pitch ball grid array. The commercial-grade C suffix corresponds to an operating-temperature range of 0°C to 85°C according to the published product information. A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic blocks, programmable interconnect, input/output resources, and embedded memory. FPGAs belong to the programmable-logic hierarchy, combining digital design flexibility with high-density parallel processing. The Spartan-3 family targets cost-sensitive embedded systems where designers require substantial logic capacity, multiple I/O, and field-updatable configurations without changing the assembled PCB. The XC3S5000-5FG676C provides 74,880 logic cells, 5 million system gates, and a 725 MHz stated maximum frequency. Its 676-ball package supports a high pin count compared with smaller FPGA packages, making it suitable for designs requiring extensive parallel interfaces. The 90 nm fabrication process and 1.2 V core supply are important for system planning because power dissipation, configuration requirements, and external I/O voltage levels must be evaluated as a complete power architecture. Its programmable logic can implement control logic, serial and parallel interfaces, protocol bridges, state machines, signal conditioning, and embedded datapaths. Designs can combine multiple fixed-function functions in one device, reducing component count and allowing configuration changes during product maintenance. Because an FPGA is programmed after fabrication, its internal architecture supports field updates, debugging, and product differentiation without physically replacing the IC. Typical uses include industrial automation, communications equipment, test and measurement systems, embedded control, video processing, and high-density interface aggregation. The large 676-ball package is especially relevant when a design requires many I/O sites or a substantial connector count. A smaller Spartan-3 device may be preferable when the system does not require the XC3S5000's 74,880 logic cells or high pin count. When designing a board around this FPGA, use the manufacturer datasheet and package documentation to verify every ball assignment, configuration interface, power rail, decoupling requirement, and I/O standard. The 1.2 V core supply and 725 MHz frequency figure describe the device itself, but actual clocking, performance, and power depend on the selected I/O standards, logic utilization, speed grade, configuration method, PCB construction, and thermal design. This page combines the published XC3S5000-5FG676C specifications, sourcing information, application guidance, and verified same-family alternatives into an engineering-focused reference for FPGA designers and component selectors.

RFC Hubungi kami
XC3S5000-5FG900C - 5M Gate Spartan-3 FPGA | Xilinx
XC3S5000-5FG900C

XC3S5000-5FG900C - 5M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-5FG900C is a 5 million-system-gate Spartan-3 field-programmable gate array with 74,880 logic cells, a maximum frequency of 725 MHz, and a 1.2 V core supply in a 900-pin FG900 FBGA package. It is designed for cost-sensitive, high-volume programmable-logic systems that require substantial parallel processing capability in a surface-mount package. A field-programmable gate array is a digital semiconductor whose configurable logic blocks, programmable interconnects, and input/output resources are configured after manufacture. The FPGA category sits within programmable logic, alongside complex programmable logic devices, and provides hardware-level parallelism without the recurring silicon cost of a fully custom application-specific integrated circuit. The Spartan-3 architecture combines configurable logic, dedicated block RAM, dedicated multipliers, and programmable I/O within one device. The XC3S5000-5FG900C provides 5 million system gates, 74,880 logic cells, and a maximum frequency of 725 MHz. Its -5 designation identifies the performance grade, while the FG900 package designation identifies the 900-ball square FBGA configuration. A 1.2 V core supply and 90 nm process technology are also associated with this device, allowing it to target high-density logic, embedded processing, and interface-control applications where an FPGA implementation is more flexible than a fixed-function ASIC. The programmable resources let one physical design support multiple product variations through configuration rather than multiple fixed masks. Parallel logic can accelerate datapaths, protocol handling, packet filtering, and control functions that would otherwise require many discrete components. The large 900-pin package exposes substantial I/O and dedicated-function connectivity, but it also requires careful ball-grid layout planning, multilayer routing, and thermal-aware assembly practices. Typical applications include broadband access equipment, home networking, industrial control, communications infrastructure, and embedded control systems. The Spartan-3 device is appropriate when design flexibility, parallel processing, and field reconfiguration justify the complexity of a high-pin-count BGA package. It is also useful in legacy systems that depend on the established Spartan-3 toolchain and device ecosystem. PCB implementation should prioritize power integrity because the device uses a 1.2 V core and numerous high-speed I/O rails. Follow the manufacturer's recommended decoupling, ball assignments, and layer-stack guidance rather than improvising a high-density escape-routing strategy. Component placement should also account for the thermal characteristics of a large FBGA and the heat generated by sustained switching activity. This product overview combines the device's core architectural identifiers with practical guidance for replacement assessment, package planning, sourcing, and application selection. The comparison and design notes focus on engineering decisions that are not apparent from a catalog listing alone.

RFC Hubungi kami
XC3S5000-5FGG676C - 5M Gate Spartan-3 FPGA | AMD Xilinx
XC3S5000-5FGG676C

XC3S5000-5FGG676C - 5M Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S5000-5FGG676C is a Spartan-3 field-programmable gate array with 5 million system gates, 74,880 logic cells, and a 676-ball fine-pitch BGA package. The device is manufactured on 90 nm process technology, operates from a 1.2 V core supply, and supports I/O standards suitable for high-density programmable logic systems. An FPGA is a configurable semiconductor whose logic, interconnect, and I/O resources can be programmed after manufacture. Within the programmable-logic hierarchy, the Spartan-3 FPGA combines dense logic fabric, block RAM, dedicated multipliers, and programmable I/O. This makes the XC3S5000 suitable for embedded systems requiring considerable parallelism without the complexity or cost of a larger application-specific integrated circuit. The XC3S5000-5FGG676C provides 74,880 logic cells in a 5 million system-gate Spartan-3 device and is identified with a speed grade of 5. Its 676-pin FBGA package supports a high pin count and dense board-level integration, while the commercial temperature range extends from 0°C to 85°C. The lead-free package designation makes it suitable for modern production boards with controlled environmental and assembly requirements. Spartan-3 devices combine configurable logic, dedicated arithmetic resources, block RAM, and digital I/O in one programmable device. The device family supports high-throughput parallel processing, protocol bridging, data acquisition, control logic, and embedded display or communication interfaces. Exact I/O counts, supported memory interfaces, clock resources, and configuration limits should be confirmed against the relevant Spartan-3 family documentation before a new board is released. Typical applications include industrial control systems, data-acquisition equipment, video-processing pipelines, communications infrastructure, instrumentation, and high-density embedded peripherals. The 676-ball package is most appropriate for multilayer PCB layouts where fine-pitch routing, via density, thermal management, and assembly capability are already established. When planning the PCB, allocate all 676 balls in the package symbol, including power, ground, configuration, and unused balls. Check the exact Spartan-3 package pinout, differential-pair rules, supply decoupling requirements, and FPGA configuration interface before fabrication. Validate the assembled board with the intended bitstream and operating conditions rather than relying only on simulation results. This product page combines the published device identity, package, capacity, speed, voltage, and temperature information with engineering-oriented selection guidance and qualified cross-reference notes. It also emphasizes why a visually similar package designation is not enough to qualify an FPGA substitution: configuration compatibility, supported I/O, speed grade, lifecycle status, and the exact manufacturer part number must all be reviewed before replacement.

RFC Hubungi kami
XC3S500E-4FG320C - 500K Spartan-3E FPGA | AMD Xilinx
XC3S500E-4FG320C

XC3S500E-4FG320C - 500K Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XC3S500E-4FG320C is a Spartan-3E field-programmable gate array with 500,000 system gates, 10,476 logic cells, 368,640 RAM bits, and 232 user I/O in a 320-BGA package. It uses a 1.14 V to 1.26 V supply and supports a 0°C to 85°C operating range. A field-programmable gate array is a semiconductor device whose digital logic and interconnect can be configured after manufacture. The XC3S500E belongs to the Spartan-3E FPGA hierarchy, combining configurable logic blocks, block RAM, programmable I/O, and clocking resources in one integrated circuit. This places it between fixed-function logic devices and larger application-specific programmable arrays. The device provides 192 logic blocks, 368,640 bits of RAM, and 232 user I/O, making it suitable for parallel data processing, control logic, interface bridging, and embedded signal-processing designs. Its 320-BGA package provides a high pin count for systems requiring numerous digital connections while using surface-mount assembly. The “500E” designation identifies the high-density member of the Spartan-3E family, while the “-4” portion identifies its performance grade. The “FG320” suffix identifies the 320-BGA package configuration, and the final “C” identifies the commercial temperature grade. These ordering-code fields determine device selection without changing the fundamental FPGA architecture. Typical uses include industrial automation, video and image processing, communications equipment, storage controllers, instrumentation, and embedded control systems. The combination of 10,476 logic cells, 368,640 RAM bits, and 232 I/O allows multiple parallel processing paths and external interfaces to be implemented in one configurable device. PCB design should account for the large BGA footprint, high pin count, and multilayer-routing requirements. Follow the AMD Spartan-3E package pinout and PCB design guidance, provide the specified supply rails, decouple each supply group, and validate high-speed signal integrity before production release. This product record combines the exact ordering information, package details, resource counts, and device constraints with practical selection guidance, packaging considerations, and same-footprint Spartan-3E alternatives for engineering review.

RFC Hubungi kami
XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FG320I

XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4FG320I is a Spartan-3E field-programmable gate array built for cost-sensitive digital systems, providing 500,000 equivalent system gates, 10,476 configurable logic cells, 368,640 RAM bits, and 232 user I/O in a 320-pin FBGA package. The -4 speed grade supports demanding control, interface, and signal-processing designs, while the 90 nm fabrication process targets high-volume consumer and embedded applications. An FPGA is a programmable digital semiconductor whose internal logic, interconnect, memory, and I/O blocks are configured after manufacture. Within the product hierarchy, the XC3S500E-4FG320I is a Spartan-3E FPGA, a member of the Spartan-3E family of programmable logic devices. Its advantage over a fixed-function mask-programmed ASIC is field programmability, allowing design revisions, shorter development cycles, and product differentiation without redesigning custom silicon. Key resources include 1,164 configurable logic blocks, 10,476 logic cells, 368,640 bits of block RAM, and 232 user I/O. The device is identified as operating with a 1.2 V supply and reaching 572 MHz under the stated operating conditions. Its 320-FBGA, 19 x 19 mm surface-mount package provides a high pin count for designs requiring substantial external connectivity. The -4 designation identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. The Spartan-3E architecture combines programmable logic with dedicated block RAM and versatile I/O resources, making it suitable for embedded control, data acquisition, protocol bridging, image processing, and general-purpose digital acceleration. Compared with mask-programmed ASICs, it permits firmware-like bitstream updates in the field. Compared with larger programmable devices, it maintains a more compact resource profile and a package option suited to I/O-intensive but cost-controlled systems. Typical uses include industrial control panels, network-interface equipment, video timing and scaler logic, consumer peripherals, and embedded instrumentation. A design may use the FPGA for parallel interface bridging, protocol conversion, state-machine control, or pre-processing before a processor handles higher-level software. The 232 user I/O and 368,640 RAM bits permit simultaneous external connections and moderate data buffering without relying on external memory for every function. PCB implementation requires careful BGA escape routing, decoupling, power integrity, and thermal management. Follow the AMD Spartan-3E Family Data Sheet DS312 for the exact ball map, pin electrical characteristics, configuration requirements, and recommended power architecture. Before substituting any equivalent, verify ball assignments, supported I/O standards, clock resources, configuration interface behavior, and the voltage requirements of the assembled board. This page combines device resources, verified source links, package characteristics, application guidance, and drop-in comparison criteria for engineers evaluating the XC3S500E-4FG320I. The comparison information also distinguishes true same-footprint device options from larger Spartan-3E packages that would require a board redesign and therefore are not treated as drop-in replacements.

RFC Hubungi kami
XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FT256I

XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD

The AMD/Xilinx XC3S500E-4FT256I is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 368,640 bits of block RAM. The device provides 190 programmable I/O pins and operates from a 1.2 V core supply in a 256-ball FTBGA package measuring 17 mm by 17 mm. Its -4 speed grade supports clocking up to 572 MHz, while the industrial suffix specifies operation from 0°C to 85°C. An FPGA is a semiconductor whose internal digital logic, interconnect, memory, and I/O can be configured after manufacture. The Spartan-3E family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated multipliers, and programmable input/output resources on one integrated circuit. This makes the XC3S500E suitable for designs requiring parallel data processing, control logic, protocol bridging, or high-speed interface termination. Principal resources include 10,476 logic cells distributed across 1,164 CLBs, together with 368,640 bits of onboard block RAM. The device offers 190 programmable I/O pins for external memory, communications links, control signals, and data buses. Its 90 nm fabrication technology and 1.2 V core supply define the core electrical characteristics, while the 256-FTBGA package supports compact, high-density surface-mount layouts. The Spartan-3E architecture combines programmable logic with dedicated block RAM and arithmetic resources. This allows designers to implement parallel datapaths without relying exclusively on external memory. The 572 MHz maximum clock figure applies to suitable device and design conditions, so final timing closure must account for the selected speed grade, logic mapping, routing, I/O standards, and board-level constraints. Typical uses include industrial control, communications equipment, instrumentation, video processing, embedded systems, and legacy processor or peripheral replacement. A design can place the FPGA between sensors or processors and external converters, or use its configurable logic to implement protocol conversion, data acquisition, timing, and control functions within one package. PCB design should follow the AMD package pinout, power-decoupling guidance, and ball-grid escape routing rules in DS312. Differential pairs and other sensitive signals require controlled impedance, while ground and supply distribution must be planned carefully for simultaneous switching activity. Toolchain, bitstream, and board-level validation are essential because legacy device migration can depend on software version and timing constraints. This product page combines device resource data, package characteristics, lifecycle information, replacement guidance, and practical PCB-design considerations to support faster engineering evaluation. It also distinguishes genuine same-footprint alternatives from package or resource variants that require redesign rather than simple replacement.

RFC Hubungi kami
XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD
XC3S500E-4PQ208I

XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD

The AMD XC3S500E-4PQ208I is a Spartan-3E field-programmable gate array in a 208-BFQFP package. It provides 500,000 system gates, 10,476 configurable logic cells, 158 user I/O, and a 4 speed grade. The industrial-temperature suffix I supports operation from 0°C to 85°C. These characteristics make the device suitable for cost-sensitive embedded control, communications, industrial automation, and consumer-equipment designs requiring programmable logic and substantial parallel I/O. A field-programmable gate array is a semiconductor whose digital logic and connectivity are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3E family combines configurable logic blocks, programmable I/O, block RAM, dedicated arithmetic resources, and clock-management functions on one device. This integration allows a board to implement control logic, protocol handling, data acquisition, and peripheral interfaces without relying on a collection of discrete logic ICs. The XC3S500E-4PQ208I includes 10,476 configurable logic cells and 158 user I/O, providing high connectivity for parallel buses, industrial interfaces, and embedded processor peripherals. Its 4 speed grade is intended for designs operating below the 5 speed-grade ceiling. The 208-pin surface-mount package supports higher I/O density than the smaller 100-pin and 132-pin alternatives in the same family, while the 28 mm by 28 mm footprint requires careful PCB routing and thermal analysis. Spartan-3E devices use configurable logic blocks and distributed or block memory resources to implement digital systems whose requirements may evolve after hardware design begins. The XC3S500E family also supports dedicated multipliers, block RAM, and clock functions for designs requiring arithmetic, local storage, or multiple clock domains. Configuration, pin constraints, timing, and power behavior should be evaluated with the current AMD FPGA design tools before schematic sign-off. Typical applications include industrial automation controllers, telecommunications line-card logic, data-acquisition systems, embedded control platforms, and instrumentation. In these systems, the high I/O count can connect external memories, transceivers, sensors, and parallel processors, while programmable logic allows firmware-independent field updates. Designers should confirm timing closure for the intended clock frequency and verify that the selected I/O standards suit each interface. PCB implementation requires a stable multilayer structure, continuous ground-plane coverage, and careful decoupling around every supply pin. The 208-BFQFP lead pitch requires a qualified assembly process, and exposed programming and configuration signals must be routed away from high-speed nodes. A finished design should also include a defined startup or configuration strategy so the FPGA operates deterministically after power application. This page combines package, logic-resource, temperature, and application guidance with practical drop-in replacement analysis. It also organizes pin, procurement, and selection questions around the device's industrial Spartan-3E positioning, helping engineers compare footprint compatibility, temperature grade, speed grade, and lifecycle needs before releasing a PCB.

RFC Hubungi kami
XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4PQG208C

XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4PQG208C is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 158 inputs in a 208-pin PQFP package. The device uses a 1.2 V supply and is identified by the provided data as supporting up to 572 MHz. It is a surface-mount programmable logic device for embedded control, signal processing, interface bridging, and parallel data acquisition systems. A field-programmable gate array, or FPGA, is a programmable digital logic device whose configurable logic and interconnect resources can be programmed after manufacture. FPGAs sit above fixed-function logic devices and programmable gate arrays in the digital-semiconductor hierarchy: a design can use programmable logic to implement counters, state machines, ALUs, control logic, and interface circuits without requiring a custom ASIC. Spartan-3E devices provide a practical balance between logic capacity, device cost, and design flexibility for embedded systems. The verified specifications identify the XC3S500E-4PQG208C as a 500K-gate Spartan-3E FPGA with 10,476 logic cells, 1,164 CLBs, 158 inputs, and a maximum clock frequency of 572 MHz. The 208-PQFP package provides a leaded, inspectable footprint for conventional surface-mount assembly. The C suffix and the verified distributor listings identify the exact commercial ordering code; the supplied sources do not provide a complete temperature-grade or lifecycle classification. This FPGA is suitable for control and sequencing logic where multiple parallel channels, counters, timers, and state machines must be implemented in one device. Its logic capacity can also support moderate data paths and protocol interfaces. The 572 MHz maximum clock figure should be treated as a device-level headline value; actual achievable clock rates depend on the selected I/O standard, timing constraints, routing, logic depth, and the external memory or transceiver interface. Typical applications include industrial automation, test-and-measurement front ends, communications adapters, embedded control systems, and signal-processing support. The package is particularly useful where a leaded package is preferred over a fine-pitch BGA and where the design requires a moderate number of I/O connections. Designers should verify board pinout, configuration requirements, power sequencing, I/O standards, and signal-integrity margins against the manufacturer datasheet before layout release. The principal design consideration is package-related routing and signal integrity. A 208-pin PQFP requires adequate copper clearances and controlled escape routing, especially for high-speed clock and interface nets. Configuration storage, bank supply voltages, decoupling, and pinout details must be implemented exactly as specified in the AMD Spartan-3E documentation. This page combines verified distributor and AMD documentation references with application guidance, lifecycle caveats, package-specific design notes, and explicitly qualified replacement analysis for engineers evaluating the XC3S500E-4PQG208C.

RFC Hubungi kami
XC3S500E-4PQG208I - 500K Spartan-3E FPGA | Xilinx
XC3S500E-4PQG208I

XC3S500E-4PQG208I - 500K Spartan-3E FPGA | Xilinx

The Xilinx XC3S500E-4PQG208I is a Spartan-3E field-programmable gate array with 500,000 equivalent logic gates, 10,476 logic cells, 1,164 configurable logic blocks, and 368,640 RAM bits in a 208-pin PQFP package. It operates from a 1.14 V to 1.26 V supply, supports an industrial temperature range of -40°C to +100°C, and is identified with the -4 performance grade. An FPGA is a reconfigurable digital semiconductor in the semiconductor hierarchy, where an FPGA is a programmable logic device used to implement digital logic, control, interface, and signal-processing functions. Unlike a fixed-function application-specific integrated circuit, an FPGA allows its logic and interconnect configuration to be programmed after manufacture. The Spartan-3E family targets cost-sensitive designs requiring substantially more logic capacity than small programmable logic devices. Key features of the XC3S500E-4PQG208I include 10,476 logic cells, 1,164 CLBs, 368,640 total RAM bits, 158 input pins, and 126 output pins. Its 208-terminal PQFP package uses a 0.5 mm pitch and measures approximately 30.5 mm by 30.5 mm with a 4.1 mm height. The operating supply range of 1.14 V to 1.26 V reflects the internally regulated core supply used by this 90 nm CMOS FPGA generation. The device belongs to the Spartan-3E architecture and is specified in the AMD Spartan-3E FPGA Family Data Sheet DS312. Its configurable logic blocks support general-purpose combinational and sequential logic, while dedicated block RAM provides 18 Kbit storage per available RAM block according to the family architecture. The 158 input and 126 output pins support external interfaces, control buses, memory connections, and high-speed digital links implemented in the FPGA fabric. Typical uses include industrial control systems, communications equipment, instrumentation, embedded data-acquisition equipment, and cost-sensitive digital signal-processing platforms. Its 10,476-cell capacity is suitable for multi-module control logic, protocol interfaces, state machines, and parallel data processing, provided the design accounts for routing, timing, I/O standards, and power-supply requirements of the Spartan-3E family. When laying out the board, use the package-specific pinout and differential-pair rules in DS312 rather than assigning FPGA I/O solely by pin number. Decoupling, configuration interface access, clock routing, JTAG connectivity, and startup behavior are as important as the logic resource count. The PQFP package has substantial leads and requires careful solder-paste, reflow, and inspection planning. This product page combines device specifications, same-package replacement options, application guidance, and engineering-focused comparison notes. It helps designers evaluate the XC3S500E-4PQG208I as a 500K-gate Spartan-3E FPGA for legacy, industrial, and embedded designs while preserving package and design-tool considerations.

RFC Hubungi kami
XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA
XC3S50A-4FT256C

XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA

AMD XC3S50A-4FT256C is a Spartan-3A field-programmable gate array with approximately 50,000 logic gates, 144 user I/O, and a 256-pin fine-pitch ball grid array package. The device operates from a 1.14 V to 1.26 V core-voltage range and is identified as a last-time-buy product. Its 4 speed grade supports cost-sensitive programmable logic applications where a compact, nonvolatile FPGA implementation is preferable to a fixed-function logic device. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output functions are configured after manufacture. Within the FPGA hierarchy, the Spartan-3A family belongs to the low-to-medium-density programmable-logic segment. The XC3S50A combines approximately 50,000 gates, 144 I/O, and a 256-ball FTBGA package in a surface-mount device suitable for compact embedded control, interface, data-capture, and industrial automation equipment. The available specifications identify 144 user I/O, a 1.14 V to 1.26 V core-voltage range, and an approximate gate count of 50,000. These resources support parallel control logic, protocol interfaces, glue logic, and modest embedded processing systems. The C suffix identifies the commercial product variant, while the -4 portion denotes the device speed grade. Detailed RAM, clock, configuration, and I/O standards were not present in the supplied verified data and must be confirmed from the AMD Spartan-3A family datasheet before design release. The XC3S50A-4FT256C is supplied in tray packaging according to the available product listing. Its 256-pin fine-pitch BGA format creates a compact land pattern but requires careful PCB layout, via-in-pad or via-under-bump considerations, and assembly processes capable of handling closely spaced balls. Signal-integrity, power-delivery, thermal, and exact package-dimension guidance should be taken directly from the AMD DS529 family document and the device pinout information. Typical uses include industrial automation controllers, instrumentation, embedded communications, consumer interfaces, and cost-sensitive control systems. Because the part is listed as last time buy, new production should include lifecycle review, planned end-of-life inventory, and a qualified second source. Lead time is listed as 12 weeks, making procurement planning essential for designs that cannot tolerate a supply interruption. Design engineers should verify the exact pinout, supported I/O standards, configuration interface, memory resources, and power requirements in the AMD Spartan-3A family datasheet before layout release. This page consolidates the supplied distributor data, lifecycle information, pricing references, drop-in family variants, and practical implementation considerations to support engineering selection.

RFC Hubungi kami
XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD
XC3S50A-4FT256I

XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD

The AMD XC3S50A-4FT256I is a Spartan-3A field-programmable gate array in a 256-ball, square, surface-mount LBGA package. The -4 suffix identifies the device speed grade, the FT code identifies the 256-ball package configuration, and the final I indicates industrial-temperature grading. Verified distributor information identifies the device as an FPGA with 144 I/O, 55,296 gates, and 1,584 logic cells. It is positioned for designs that require programmable digital logic, parallel interfaces, embedded control, and compact system integration. A field-programmable gate array is a semiconductor whose digital configuration is defined after fabrication. The FPGA category sits above programmable logic devices and below configurable digital system components, combining configurable logic blocks, programmable I/O, and dedicated resources in one integrated circuit. This hierarchy allows engineers to implement control, communications, data acquisition, signal processing, and interface logic on hardware that can be revised without changing the printed circuit board. The Spartan-3A family provides configurable logic blocks containing lookup tables and flip-flops, along with programmable general-purpose I/O and dedicated multiplier and accumulator resources in DSP48A slices. Those DSP48A resources are useful for multiply-accumulate operations, while the 144-I/O configuration supports systems with substantial external bus and control connectivity. The exact switching, timing, configuration-memory, and electrical limits must be confirmed in the AMD DS529 Spartan-3A family data sheet before a design is released. The XC3S50A-4FT256I is differentiated by its combination of the -4 performance grade, industrial-temperature grading, and 256-ball LBGA package. The industrial marking makes it more appropriate for temperature-controlled factory, telecom, and test equipment than a commercial-temperature alternative. The compact 17 x 17 mm package also supports dense board layouts, although its 256-ball geometry requires careful inspection and assembly planning. Typical applications include industrial automation, telecommunications, embedded instrumentation, data-acquisition systems, and compact control platforms. In these systems, the FPGA can consolidate parallel interface logic, perform protocol conversion, coordinate control sequencing, or implement DSP pipelines. Pairing it with an external data converter, communications transceiver, and nonvolatile configuration storage can produce a complete embedded processing subsystem. Designers should treat the 256-LBGA footprint as a demanding assembly constraint. The board should use an appropriate ball pitch and copper-compatible surface finish, while assembly planning must account for inspection, cleaning, placement, and solder-joint verification. Power rails, configuration sequencing, decoupling, clocking, and I/O standards should be designed from the complete AMD datasheet rather than inferred solely from the ordering code. This page combines verified distributor specifications, package data, and the AMD DS529 family reference with practical considerations that are not visible in a basic distributor listing. It also separates documented facts from parameters that still require schematic-level and board-level verification, helping engineers evaluate the XC3S50A-4FT256I for industrial FPGA designs without relying on assumptions.

RFC Hubungi kami
XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD
XC3S50A-4FTG256C

XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD

The AMD XC3S50A-4FTG256C is a Spartan-3A field-programmable gate array with 50K logic gates, 55,296 logic cells, 1,584 configurable slices, and 144 user I/O in a 256-ball FTBGA package. It is manufactured on 90 nm CMOS technology, operates from a 1.2 V core supply, and is specified at a nominal 667 MHz performance point. The -4 designation identifies its speed grade, while the final C suffix identifies the commercial temperature grade. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O functions are configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, alongside CPLDs, and provides parallel hardware implementation of control, signal-processing, communications, and data-acquisition functions. The Spartan-3A family combines moderate logic density with a large I/O count in a cost-conscious architecture for embedded control and industrial equipment. The XC3S50A-4FTG256C provides 144 user I/O, giving it substantial connectivity for parallel buses, control signals, and external interfaces. Its 1,584 slices divide the 55,296 logic cells into parallel programmable resources for combinational and sequential logic. The 50K-gate description provides a relative scale for system architects, while the 667 MHz figure establishes the device's timing-performance class for clocked designs. The 256-ball FTBGA package supports compact PCB integration but requires careful escape routing, via-in-pad considerations, and thermal design. A 90 nm fabrication process and 1.2 V core supply place this device in an established low-power FPGA generation. Designers should use the AMD DS529 family data sheet for package dimensions, pin definitions, configuration requirements, bank voltage rules, and supported I/O standards. Typical uses include industrial control systems, instrument interfaces, digital signal-processing front ends, communications equipment, and embedded test systems. Its combination of 144 I/O and 1,584 slices is useful when an application needs many parallel external connections or moderate logic parallelism rather than the density of a larger FPGA. Configuration storage, clocking, power sequencing, and JTAG programming remain essential board-level functions. When replacing another device, verify the exact BGA ball map, power rails, configuration interface, I/O voltage standards, and speed grade rather than relying only on the logic-cell count. The C-grade suffix and -4 speed designation affect system timing and environmental requirements. Use the manufacturer's package pinout and configuration guidance to validate every board-level connection before production release. This product record combines the verified Spartan-3A device characteristics with package-aware replacement guidance, commercial sourcing instructions, and practical design notes for 256-ball FTBGA implementation. It is intended to accelerate initial component screening while preserving the verification work required for production-quality FPGA designs.

RFC Hubungi kami