Produk (46,000+)

XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD
XC7Z014S-2CLG400E

XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD

The AMD XC7Z014S-2CLG400E is a single-core Arm Cortex-A9 MPCore processor with CoreSight system-on-chip containing 65K Artix-7 FPGA logic cells, operating at 766 MHz, and housed in a 400-CSPBGA package measuring 17 x 17 mm. It combines programmable logic with a hard processor subsystem, DDR memory interfaces, high-speed serial connectivity, and general-purpose I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip that combines an Arm Cortex-A9 processing subsystem with a 7-series FPGA fabric. The processor executes operating systems and application software, while the programmable logic accelerates parallel data processing, controls external interfaces, or implements custom hardware. This integration reduces the number of devices and interconnects required compared with a separate microprocessor and FPGA. The XC7Z014S includes 65K logic cells and a 766 MHz single-core Cortex-A9 MPCore with CoreSight debug support. Its 400-CSPBGA package provides 200 I/O according to the manufacturer product description. The integrated architecture supports designs requiring deterministic programmable-logic timing alongside conventional processor-based control, networking, data acquisition, and user-interface functions. The -2 speed designation identifies the device performance grade, while CLG400 identifies the 400-ball CSPBGA package and the trailing E identifies the specified temperature or product grade. Because FPGA configuration, DDR routing, power delivery, and high-speed differential pairs are tightly coupled, replacement decisions must include both the exact speed suffix and the complete package designation rather than relying only on the Zynq family name. Typical uses include industrial control, communications equipment, embedded vision, test and measurement, audio processing, and embedded servers. The processor side supports conventional software workflows, while the Artix-7 fabric can implement parallel data paths, custom peripherals, high-speed interfaces, or hardware accelerators. The integrated CoreSight facilities also assist design validation and software-oriented debugging. Layout must follow the AMD Zynq-7000 Package Device Pinout Files and the package-specific power, decoupling, and differential-pair guidance. Preserve the assigned power and ground balls, provide the specified voltage rails, route memory and high-speed interfaces with controlled impedance, and use the exposed thermal and assembly requirements defined for the 17 x 17 mm CSPBGA. Validate the complete Vivado design against the exact device and package before fabrication. This page combines the manufacturer specifications, verified device descriptions, package details, practical PCB guidance, and same-footprint upgrade or replacement options for engineers evaluating the XC7Z014S-2CLG400E as a programmable SoC platform.

RFC Hubungi kami
XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD
XC7Z014S-2CLG400I

XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD

The AMD XC7Z014S-2CLG400I is a Zynq-7000S system-on-chip with one Arm Cortex-A9 MPCore processor, approximately 65,000 FPGA logic cells, a 766 MHz processor operating frequency, and a 400-CSPBGA package measuring 17 x 17 mm. The -2 speed designation and I temperature suffix identify the industrial-grade ordering configuration. A Zynq-7000S system-on-chip belongs to the programmable SoC hierarchy, combining an Arm Cortex-A9 application processor with an FPGA fabric in one device. This integration permits software-controlled operating-system execution and hardware-level parallelism in the same package. The resulting platform is well suited to embedded systems that need flexible I/O, real-time data processing, programmable logic, and software extensibility without using separate processor and FPGA packages. The device provides approximately 65K logic cells and a 766 MHz Arm Cortex-A9 MPCore configuration. The 400-CSPBGA package supports a dense PCB footprint while exposing the device's processor, programmable logic, memory interfaces, and high-speed I/O. Its integrated architecture can shorten signal paths between software-controlled processing and parallel hardware pipelines, reducing inter-component communication overhead in applications such as industrial control, data acquisition, communications, and embedded vision. Programmable logic implements deterministic datapaths, protocol handling, filtering, and interface conversion, while the Cortex-A9 processor executes operating-system software, network stacks, control functions, and user applications. Designers can partition a workload between these resources instead of assigning every operation to software or fixed-function hardware. This mixed implementation model provides flexibility during prototyping and can improve throughput when parallel operations are better suited to FPGA fabric. Typical applications include industrial monitoring equipment, programmable test systems, motor and motion control, embedded communications gateways, camera and image-processing front ends, and sensor-fusion platforms. The processor side can manage configuration, control flow, and external networking, while the programmable logic side accelerates sampling, buffering, filtering, and fixed-format data conversion. The integration is especially useful when deterministic data movement and concurrent software tasks are both required. PCB design must account for the BGA-400 land pattern, power-plane requirements, decoupling, high-speed routing, and thermal management. Follow the AMD package pinout files and Zynq-7000 design guidance when assigning power, ground, clock, memory, and peripheral signals. Validate the completed board for signal integrity and thermal performance before production. This page combines the device architecture, ordering information, package details, verified drop-in candidates, comparison criteria, and practical implementation guidance to support component selection, PCB planning, firmware integration, and hardware acceleration for Zynq-7000S embedded designs.

RFC Hubungi kami
XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD
XC7Z014S-2CLG484E

XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD

The AMD Xilinx XC7Z014S-2CLG484E is a Zynq-7000 system-on-chip FPGA with 65,000 logic cells, a single-core Arm Cortex-A9 processor operating at 766 MHz, and 256 KB of on-chip RAM. The device is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. It combines programmable logic, a hard processor subsystem, CoreSight debug support, and integrated memory into one heterogeneous processing platform. A Zynq-7000 SoC is an FPGA and SoC in the same silicon device. Its Arm Cortex-A9 processing subsystem executes operating systems, networking stacks, control software, and application code, while the Artix-7 FPGA fabric implements parallel datapaths, custom accelerators, protocol engines, and time-critical logic. This programmable-logic-plus-processor hierarchy places the device between conventional FPGAs, microcontrollers, and dedicated application-specific processors. The XC7Z014S offers 65,000 programmable logic cells for hardware customization, along with 766 MHz Arm Cortex-A9 performance and 256 KB of on-chip RAM. The -2 speed designation identifies the device performance grade, while the E suffix identifies its temperature grade. Its 484-pin CSPBGA package exposes the processing, programmable-logic, memory, power, ground, configuration, and general-purpose I/O resources required for a high-pin-count module design. The heterogeneous architecture allows software to control the system while programmable logic handles deterministic data acquisition, filtering, waveform generation, video processing, or interface bridging. Pin multiplexing must be planned carefully because many hard I/O functions can be assigned to programmable I/O through the design toolchain. Power sequencing, bank-specific supply requirements, decoupling, configuration boot, and high-speed memory implementation are central PCB-design considerations for this device. Typical uses include industrial automation and factory control, industrial Ethernet equipment, camera and image-processing systems, communications infrastructure, edge-computing gateways, instrumentation, and embedded vision. The Cortex-A9 subsystem handles network protocols and control logic, while the FPGA fabric can execute parallel algorithms such as filtering, packet inspection, data acquisition, and hardware-assisted image processing without relying solely on the processor. A robust design should follow the AMD Zynq-7000 power, decoupling, configuration, and package-layout guidance. Use the recommended regulator topology for each supply bank, preserve the specified startup sequence, and validate high-speed interfaces with controlled impedance routing. Consider processor-resource and logic-resource utilization together because software placement, memory bandwidth, and hard I/O selection can determine whether the design fits the selected XC7Z014S device. This product record combines package, processor, logic-capacity, memory, pinout-resource, comparison, sourcing, and implementation guidance in one engineering-focused reference. It also distinguishes speed-grade and temperature-grade alternatives that use the same CLG484 footprint, helping designers evaluate replacement options without overlooking migration constraints.

RFC Hubungi kami
XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD
XC7Z014S-2CLG484I

XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD

The AMD XC7Z014S-2CLG484I is a Zynq-7000 SoC FPGA integrating a single ARM Cortex-A9 MPCore processing system with CoreSight debug support and 65K Artix-7 programmable logic cells. The device operates at 766 MHz and is packaged in a 484-CSPBGA measuring 19 mm by 19 mm. It combines a hard processor, programmable logic, memory controllers, and connectivity interfaces in one mixed-signal system-on-chip package. A Zynq SoC is a system-on-chip that combines an ARM processing system with FPGA programmable logic. Its product hierarchy runs from FPGA and SoC to adaptive SoC and embedded processing. The processing system executes operating systems and control software, while the programmable logic implements parallel data paths, hardware accelerators, custom interfaces, and time-critical signal processing. This division allows one device to consolidate functions that might otherwise require a separate microcontroller and FPGA. The XC7Z014S uses a 28 nm process and provides 200 I/O according to the product listing. Its single Cortex-A9 processor includes the Cortex-A9 MPCore architecture and CoreSight debugging, while the Artix-7 logic fabric provides 65K logic cells. The -2 speed designation corresponds to the listed 766 MHz processor operating point. Its CLG484 package also supports DDR memory interfaces and other programmable-logic I/O needed by embedded control, communications, and industrial systems. The integrated architecture permits hardware acceleration without a separate FPGA-to-SoC interconnect. Parallel functions can execute in programmable logic while the ARM core manages control flow, operating systems, or network protocols. This can reduce board area and latency, although firmware, Vivado implementation, hardware/software partitioning, DDR layout, and clocking must be designed as one coherent system. Pin assignments and power sequencing should follow the AMD Zynq-7000 package documentation and pinout files. Typical uses include industrial machine control, factory automation, networked embedded controllers, sensor and vision preprocessing, communications gateways, and test equipment. The Cortex-A9 side is appropriate for Linux or RTOS-based supervisory control, while programmable logic can accelerate data acquisition, protocol conversion, motor-control algorithms, or custom video and communications pipelines. The 200-I/O count supports integration of DDR, transceivers, control signals, and external memory. Power planning is central to a 484-CSPBGA design. The processor, programmable logic, and high-speed memory interfaces can create substantial dynamic and thermal loads even though the part is not a conventional linear power device. Use the AMD data sheet for recommended rails, sequencing, decoupling, and operating limits. Place bypass capacitors at the supply pins, route power and ground planes carefully, and provide thermal copper around the BGA while avoiding via stubs in sensitive nets. This page combines the manufacturer data-sheet link, exact device specifications, package details, practical Zynq design guidance, and clearly qualified same-package alternatives. It also distinguishes speed and temperature-grade options so engineers can identify a potential hardware replacement without mistaking it for a complete system-level equivalence.

RFC Hubungi kami
XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD
XC7Z015-1CL485I

XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD

The AMD XC7Z015-1CL485I is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 processor with 74K Artix-7 FPGA logic cells in a 484-CSPBGA package operating at 667 MHz. It integrates programmable logic, dual-core Arm processing, memory interfaces, and high-speed connectivity for embedded control, industrial automation, communications, and edge-processing systems. The verified distributor description identifies the device as a system-on-chip with dual Arm Cortex-A9 MPCore and CoreSight technology. A Zynq-7000 SoC FPGA is more than a conventional FPGA: it combines a hard processor subsystem with programmable logic in one device. This heterogeneous architecture allows software tasks to run on the Arm processor while dedicated hardware accelerates parallel logic, interface, signal-processing, or control functions. The XC7Z015-1CL485I belongs to the Zynq-7000 family and is identified by the 74K logic-cell configuration. Key verified characteristics include dual Arm Cortex-A9 MPCore processing, CoreSight debug support, 74K FPGA logic cells, 667 MHz operation, and a 484-CSPBGA package measuring 19 x 19 mm. These attributes make the part suitable for embedded systems that need both sequential software execution and programmable hardware. Its integrated architecture can reduce external component count compared with separate processor and FPGA implementations. The device is supplied under the exact ordering code XC7Z015-1CL485I. The verified distributor records show product availability, pricing, inventory, and SoC FPGA descriptions, while the exact electrical limits, temperature ratings, memory interfaces, I/O standards, and power characteristics are not provided in the supplied data. Engineers should therefore verify the complete manufacturer datasheet and package pinout before finalizing a design. Typical applications include industrial factory control, network-connected embedded systems, camera and image-processing front ends, robotics, communications equipment, and low-power edge computing. The processor subsystem is suitable for control software, networking stacks, and operating-system support, while the programmable fabric handles parallel datapaths, interfaces, or accelerators. A critical design consideration is the dense BGA package and its many power, ground, and high-speed pins. PCB layout, decoupling, bank voltage planning, signal integrity, and thermal management must be developed against the official package information. This page summarizes verified distributor information and identifies parameters requiring manufacturer-data confirmation before release to fabrication. This page combines exact distributor metadata, application guidance, package considerations, and sourcing information intended to help engineers evaluate XC7Z015-1CL485I efficiently while avoiding unsupported technical assumptions.

RFC Hubungi kami
XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD
XC7Z015-1CLG485C

XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z015-1CLG485C is a Zynq-7000 adaptive SoC combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 485-CSPBGA package. It operates at 667 MHz, provides 74K FPGA logic cells, and integrates 130 PS I/O with 150 programmable FPGA I/O. The device is designed for embedded systems that require programmable hardware acceleration alongside a coherent Arm-based software environment. A Zynq-7000 adaptive SoC is a heterogeneous system-on-chip that places an Arm processor system and FPGA fabric in one package. The processor subsystem supports Linux and standalone applications, while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and time-critical control logic. This integration reduces interconnects between the processor and programmable logic compared with a two-chip architecture while preserving the flexibility of FPGA-based hardware. The XC7Z015 combines two Arm Cortex-A9 MPCore processors with CoreSight debug support and 74K Artix-7 logic cells. Its 667 MHz processor rating supports operating-system-based control, communications management, and application processing. The 150 FPGA I/O expand interface options for external memory, networking, industrial interfaces, image acquisition, and embedded peripherals. The integrated processor, memory interfaces, fabric, and I/O make the device suitable for compact embedded platforms where board area and system integration are priorities. The CLG485 package uses a 19 mm by 19 mm CSP-BGA format and places 485 signal or power positions beneath the device. A 1.05 V supply rating is identified for the processor core, although the complete power architecture requires multiple rails and strict sequencing. The commercial-grade part is specified from 0°C to 85°C, making it appropriate for temperature-controlled industrial, communications, instrumentation, and test equipment rather than uncased automotive or extreme-temperature installations. Typical applications include industrial control gateways, machine vision, communications infrastructure, test and measurement systems, embedded servers, and network appliances. In each case, the processor can run control-plane software while FPGA logic accelerates data movement, protocol handling, filtering, encryption, or sensor acquisition. The heterogeneous architecture is especially useful when deterministic parallel behavior and conventional operating-system support are both required. Design work should begin with the AMD Zynq-7000 technical reference material and the CLG485 package placement diagram. Confirm every power rail, decoupling requirement, configuration interface, memory topology, and pin multiplexing decision against the manufacturer documentation. The 19 mm by 19 mm BGA also requires careful escape-routing planning, inspection access, and substrate-aware thermal design. This product page consolidates the confirmed device identity, package information, operating limits, engineering use cases, compatible device variants, and selection considerations into one design-oriented reference for engineers evaluating the XC7Z015-1CLG485C.

RFC Hubungi kami
XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD
XC7Z015-1CLG485I

XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD

The AMD XC7Z015-1CLG485I is a Zynq-7000 Artix-7 FPGA system on chip with two 667MHz ARM Cortex-A9 MPCore processors, CoreSight debug capability, 74K logic cells, and a 485-CSPBGA package measuring 19 mm by 19 mm. It combines programmable FPGA fabric with a dedicated dual-core processing system in one device. A Zynq-7000 SoC is an FPGA and programmable system-on-chip architecture that integrates FPGA logic with a hard-processor subsystem. The FPGA fabric supports parallel hardware processing, while the ARM Cortex-A9 subsystem supports operating systems, networking, control functions, and application software. This hierarchy places the XC7Z015 within the FPGA and SoC family and makes it useful where designers need both software flexibility and hardware-level performance. The principal device characteristics are two Cortex-A9 MPCore processors operating at 667MHz, 74K FPGA logic cells, CoreSight debug support, and a 485-CSPBGA package. The -1 speed designation identifies the device performance grade, while CLG485 identifies the 485-ball package. Industrial-temperature and extended-temperature behavior should be confirmed against the exact ordering code and AMD documentation before deployment. Architecturally, the XC7Z015 separates processor-side and programmable-logic functions while allowing designers to exchange information through high-bandwidth interfaces. Parallel accelerator logic can execute filtering, encryption, video processing, or interface conversion at deterministic rates, while the processor subsystem controls data flow and operating-system functions. CoreSight provides integrated visibility for processor-based debugging and trace-oriented development workflows. Typical uses include industrial machine vision, networked industrial control, communications equipment, high-performance embedded processing, and FPGA-assisted data acquisition. The dual-core processor configuration can support partitioning between an operating system and control tasks, while the 74K logic cells can accelerate parallel datapaths without requiring a separate FPGA. Software-defined controls, protocol conversion, and sensor fusion are additional suitable workloads. Board design requires careful attention to the 19 mm by 19 mm BGA escape routing, power sequencing, decoupling, and thermal performance. Use AMD package files and the Zynq-7000 package pinout resources when assigning power, ground, high-speed memory, and I/O pins. Differential and high-speed interfaces should be routed with controlled impedance and verified against the relevant Zynq-7000 guidance. This product page combines exact catalog identifiers, device architecture, package details, qualification alternatives, comparison data, and implementation guidance. It also organizes replacement and selection questions around the constraints that determine whether a candidate is genuinely usable on the same PCB.

RFC Hubungi kami
XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD
XC7Z015-2CL485I

XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD

The AMD XC7Z015-2CL485I is a Zynq-7000 All Programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug and 74K Artix-7 FPGA logic cells, housed in a 484-pin CSPBGA (19x19 mm) package. According to AMD/Xilinx product pages, the device runs at up to 766 MHz on the application processor side and combines hard-core peripherals (DDR controller, USB, Gigabit Ethernet, SD/SDIO, CAN, SPI, I2C, UART) with 74K logic cells, 46,200 LUTs and ~3.5 Mb of block RAM in the programmable logic. The XC7Z015-2CL485I is part of the Z-7015 speed/temperature family (industrial, 766 MHz). It targets embedded designs that need deterministic ARM processing alongside custom RTL acceleration, without external CPU + FPGA partitioning. An SoC (System on Chip) is an integrated circuit that consolidates a microprocessor, memory, peripherals, and often programmable logic into a single die. In the Zynq-7000 family the terminology hierarchy is: SoC > All-Programmable SoC > ARM + FPGA heterogeneous device > Zynq-7000 series > Zynq-7015 sub-family. The 7000S class in the same generation uses a single-core Cortex-A9, whereas Z-7015/7030/7045/7100 parts are dual-core; the XC7Z015 sits at the low end of the dual-core Zynq-7000 family with 74K logic cells, while the XC7Z030/045/100 scale up to 125K-444K cells. Key features include a hard DDR3/DDR3L memory controller with ECC support, two ARM Cortex-A9 cores with NEON extensions and Floating Point Unit, and 95 user I/O pins (the constraint in the 484-CSPBGA package). Programmable logic resources include 74K logic cells (Artix-7 fabric), ~3.5 Mb of block RAM, and 220 DSP slices. Built-in peripherals include two Gigabit Ethernet MACs, two USB 2.0 OTG ports, two CAN 2.0B controllers, two I2C, two SPI, two UART, two SD/SDIO, and GPIO. The 484-CSPBGA (19x19 mm) industrial-grade package supports operation from -40C to +100C and uses a Cavity-Lead BGA construction with flip-chip silicon for improved thermal performance. A common design pitfall is the chip-density distinction: -2 is the standard speed grade while -3 is the high-performance grade. Both share identical pinout and may co-exist on the same PCB; some logic timing paths fail closure at -2 that succeed at -3, so designs targeting the Zynq PS at 766 MHz must be validated against the -2 timing model. Power architecture typically uses a TPS6508640 or similar PMIC and decoupling must follow UG585/Z-7015 placement diagrams. Typical applications include industrial motor control (Bldc/FOC with ARM and DSP slices), machine vision smart cameras (Cortex-A9 + image pipeline in fabric), IoT edge gateways with deterministic ARM software + custom interfaces, Software Defined Radio (data pipes to RF ADCs/DACs), automotive driver assistance, and avionics/industrial control. The wide temperature range plus integrated PCIe Gen2 makes it ideal for ruggedized designs. When designing with this SoC, allocate PS peripherals carefully because the 7015 has fewer PL-side HP/HR ports than larger Zynq parts; the 484-CSPBGA constrains MIO/EMIO usage. Verify fabric timing against your synthesis results at the -2 speed grade even if a -1 (which the 7015 does not offer) prototype is treated as the target. Plan thermal dissipation: industrial -40C to +100C operation requires the CSPBGA thermal pad to be soldered to a PCB thermal via array per AMD application notes. This page synthesizes distributor pricing (LCSC, DigiKey, Avnet), drop-in alternatives from the same Xilinx Z-7015 family (so designers can pick the right speed/temperature bin), and practical design guidance that goes beyond the manufacturer's datasheet summary.

RFC Hubungi kami
XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD
XC7Z015-2CLG485E

XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD

The AMD XC7Z015-2CLG485E is a Zynq-7000 heterogeneous system-on-chip that fuses a dual-core ARM Cortex-A9 MPCore processing system running at up to 766 MHz with an Artix-7 class FPGA fabric of 74K logic cells, supplied in a 485-CSPBGA package measuring 19 x 19 mm. The -2 suffix denotes the -2 speed grade, and the trailing E identifies the extended commercial temperature option of the XC7Z015 device family. A Zynq-7000 SoC sits in the hierarchy above a discrete microcontroller and above a discrete FPGA: it is a programmable logic device (FPGA and CPLD family) that integrates a hardwired application processor, so one silicon die carries both a software-execution environment and fabric-level parallel logic. AMD positions this combination for designs that need deterministic hardware acceleration alongside a familiar Linux or bare-metal software stack, without the two-chip power, area and inter-chip latency penalty of a processor-plus-FPGA design. Key device features include two hard ARM Cortex-A9 cores with CoreSight debug support, a 74K-logic-cell FPGA fabric, integrated DDR memory controllers, and a high-speed serial transceiver capability typical of the mid-density Zynq members. The device is offered in the 485-ball chip-scale BGA package designated CLG485, a 19 x 19 mm surface-mount ball grid array with a 0.8 mm ball pitch that supports high-density PCB escape routing and multilayer board construction. Technically, the device separates the programmable system (PS) from the programmable logic (PL) domains so that each can be optimized independently: the PS runs hard real-time control code and operating-system tasks, while the PL side handles pixel pipelines, protocol framing, sensor capture, DSP blocks and high-speed I/O that would starve a software-only processor. The Artix-7 fabric in this member is the smallest of the Zynq-7000 dual-core options, which keeps dynamic power and board cost low relative to the larger XC7Z020 and XC7Z030 members. Typical uses include industrial machine-vision and inspection cameras, industrial protocol gateways, video capture and encode nodes, medical imaging peripherals, secure boot and encryption appliances, and industrial Ethernet or storage controllers where fabric logic handles wire-speed framing and the CPU manages the control plane. When laying out the board, treat the CLG485 package as a full ball-grid escape problem: follow the AMD Zynq-7000 package pinout and PCB guidelines, provide the documented core supply rails with decoupling close to the balls, and keep high-speed transceiver and memory routing on properly referenced layers to preserve signal integrity and margin on the -2 speed grade. This page consolidates distributor availability, drop-in variant matching, package and speed-grade comparisons, and board-level design guidance that the manufacturer data sheet alone does not present in a directly usable, side-by-side form.

RFC Hubungi kami
XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z015-2CLG485I

XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z015-2CLG485I is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug technology and 74K FPGA logic cells. The processor operates at 766 MHz, and the device is housed in a 485-CSPBGA package measuring 19 x 19 mm. Its integrated architecture combines programmable logic, ARM processors, memory interfaces, connectivity, and debug functions in one silicon device. A Zynq-7000 SoC is a heterogeneous computing device that bridges the ARM Cortex-A9 microcontroller domain and the FPGA logic domain. Unlike a conventional FPGA, it executes software on its integrated processor while accelerating data-intensive tasks in parallel programmable logic. The XC7Z015 combines the Arm Cortex-A9 platform with Artix-7-class FPGA resources, making it suitable when a design needs flexible hardware parallelism without a separate processor and FPGA. The headline resources include two Arm Cortex-A9 processor cores, a 766 MHz operating frequency, CoreSight debug support, and 74K logic cells. The device also supports 1.5 V, 2 V, and 2.5 V power domains. This combination allows control software, communication protocols, and user-defined datapaths to share one package while maintaining deterministic hardware interfaces between the processor system and programmable logic. The -2 ordering designation identifies the performance grade of this XC7Z015 device, while the CLG485 suffix identifies the 485-ball chip-scale BGA package. AMD documents the XC7Z015-CLG485 package placement separately, including pin locations and device-specific assignments. Engineers should use the AMD package-pinout files and UG865 package information when assigning PCB balls and power rails. Typical uses include industrial image processing, embedded vision, programmable networking, high-speed data acquisition, and control systems requiring both a real-time processor and FPGA acceleration. The ARM side is appropriate for operating systems, networking stacks, and application-level control, while programmable logic can implement parallel algorithms, custom interfaces, or low-latency signal chains. These functions can exchange data through dedicated interfaces inside the SoC rather than through external component-to-component buses. Board design must account for the 485-CSPBGA escape-routing requirement, multiple supply rails, decoupling, and thermal performance of a compact 19 x 19 mm package. Use the pin-description and package-placement documentation during schematic capture, then cross-check every ball against the selected design tools. Confirm the required Vivado device support, memory interface topology, and board-level power sequencing before releasing the PCB layout. This product overview combines the exact resource and package details for the XC7Z015-2CLG485I with practical guidance for FPGA-assisted embedded processing. It also organizes same-package speed and temperature alternatives, selection criteria, and design cautions so engineers can evaluate the device against the exact requirements of a Zynq-7000 implementation.

RFC Hubungi kami
XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z015-3CLG485E

XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z015-3CLG485E is a Zynq-7000 system on chip integrating a dual-core Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 74K logic cells, and an 866 MHz processor operating point in a 485-CSPBGA package measuring 19 x 19 mm. The device combines programmable logic, hard real-time processing, and CoreSight debug support in one package. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic. Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems. The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release. Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination. Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.

RFC Hubungi kami
XC7Z015-L1CLG485I - Dual-Core 667MHz Zynq SoC | AMD
XC7Z015-L1CLG485I

XC7Z015-L1CLG485I - Dual-Core 667MHz Zynq SoC | AMD

AMD XC7Z015-L1CLG485I is a Zynq-7000 Artix-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system at 667 MHz, CoreSight debug capability, and 74K programmable logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. The device integrates the processing system and programmable logic into one 28 nm silicon solution for embedded control, industrial automation, communications, and data-processing systems. A Zynq system-on-chip is an FPGA and SoC architecture that combines a hard processor system with programmable logic in one package. Within the semiconductor hierarchy, it belongs to the FPGA and SoC class, while the ARM Cortex-A9 portion operates as a general-purpose processing system and the 74K-cell portion provides hardware-accelerated programmable logic. This integration reduces component count and allows software-controlled algorithms to be implemented in parallel hardware. The target device uses two ARM Cortex-A9 cores operating at 667 MHz and includes CoreSight technology for debug and trace visibility. Its programmable logic section contains 74K logic cells and is based on the Artix-7 FPGA family. The combination supports Linux or RTOS-based software, high-speed memory interfaces, general-purpose I/O, and custom datapaths without requiring a separate FPGA. The Zynq-7000 SoC architecture separates the processing system, commonly called the PS, from the programmable logic, commonly called the PL. The PS provides the ARM Cortex-A9 computation platform, while the PL can implement fixed or reconfigurable hardware such as interfaces, accelerators, filters, or protocol engines. AMD describes the integration as a 28 nm Xilinx programmable-logic implementation combined with a feature-rich dual-core ARM Cortex-A9 processing system. Typical uses include industrial machine vision, factory automation, communications infrastructure, embedded data acquisition, network equipment, and test systems. A programmable image-processing pipeline can run in the PL while the ARM cores manage control software, operating-system tasks, and external communication. The 485-CSPBGA package also supports compact designs requiring many high-density board connections. PCB design requires careful BGA escape routing, uninterrupted supply planes, decoupling near the device, and controlled-length interfaces to attached memory and transceiver components. Because the package contains both a processor system and programmable logic, firmware, programmable logic, DDR memory connectivity, and pin multiplexing must be planned together. Use the AMD package placement and pinout files to assign every BGA position correctly. This product page combines the manufacturer package information with verified distributor records, family-level alternatives, application guidance, and practical design notes. It is intended to help engineers evaluate the XC7Z015-L1CLG485I for a new Zynq-7000 design or identify a compatible family member before beginning PCB layout.

RFC Hubungi kami
XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD
XC7Z020-1CLG400C

XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD

The AMD XC7Z020-1CLG400C is a Zynq-7000 programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug support and 85K Artix-7 FPGA logic cells. The device operates at 667 MHz and is packaged in a 400-ball chip-scale BGA measuring 17 mm by 17 mm. This combination places programmable logic, hard processor cores, memory interfaces, and high-speed I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip, combining an application processor subsystem with programmable FPGA fabric. The ARM Cortex-A9 subsystem executes operating-system-level software, while the Artix-7 fabric accelerates parallel algorithms, implements custom peripherals, or handles high-throughput data movement. This system-on-chip hierarchy differs from a conventional microcontroller because substantial programmable logic is integrated alongside the processor. Key device attributes include two ARM Cortex-A9 cores, a 667 MHz processor rating, 85K logic cells, and a 400-CSPBGA package. The programmable logic allows hardware designers to implement parallel image processing, interface bridging, protocol termination, or custom accelerators while the processor subsystem handles control software and operating-system tasks. CoreSight support provides integrated visibility for hardware-assisted debugging and trace-based development. The XC7Z020 belongs to the Zynq-7000 family, which combines an ARM Cortex-A9-based processing system with Xilinx 7-series FPGA fabric. The -1 suffix identifies the performance grade, CLG400 identifies the 400-ball package, and C identifies the commercial temperature option. Package-level integration reduces the number of interconnects compared with a separate processor and FPGA, but it also requires careful power, decoupling, and escape-routing work because the BGA uses a dense ball pitch and exposes many dedicated pins. Typical uses include industrial vision, edge video processing, programmable industrial control, communications infrastructure, and embedded systems requiring deterministic parallel processing. In these applications, software running on the Cortex-A9 cores can coordinate system behavior while FPGA logic concurrently processes image data, manages high-speed links, or accelerates repetitive computations. The 667 MHz processor and 85K logic cells provide a balanced platform for control-heavy systems with parallel hardware tasks. The principal design consideration is power planning. Every power rail must satisfy its specified voltage, sequencing, and current limits, while the CLG400 package requires careful via-in-pad or via-beneath-pad arrangements where the board design permits them. Use the AMD package pinout files and Zynq-7000 datasheet to assign every ball, bank voltage, decoupling capacitor, and configuration signal before layout release. This product page combines the exact device identity, package information, processor and logic-cell ratings, strict drop-in alternatives, application guidance, and engineering-focused design notes. It also distinguishes exact replacement options from larger or differently packaged Zynq devices that would require design changes.

RFC Hubungi kami
XC7Z020-1CLG400CES Dual Cortex-A9 Zynq SoC | AMD
XC7Z020-1CLG400CES

XC7Z020-1CLG400CES Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z020-1CLG400CES is a programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug support and an Artix-7 FPGA fabric. The device provides 85K logic cells, operates at 667 MHz according to its distributor product listing, and is packaged in a 400-CSPBGA package measuring 17 x 17 mm. Its architecture integrates hard real-time processing, programmable logic, high-speed serial connectivity, and memory interfaces in one device. A Zynq-7000 SoC is an adaptive SoC that places an Arm Cortex-A9 application processor and Xilinx FPGA fabric on the same silicon. This device class extends beyond a conventional microcontroller or stand-alone FPGA: software executes in the processor domain, while programmable logic handles parallel data acquisition, control, interface bridging, and hardware acceleration. The resulting hierarchy is Zynq SoC, adaptive SoC, FPGA and CPLD, programmable logic, processor-based embedded system, and semiconductor. Key device characteristics include two Cortex-A9 cores, 85K FPGA logic cells, 667 MHz processor performance, and a 400-CSPBGA package. The processor domain supports a conventional software-development flow, while the programmable-logic domain supports high-throughput parallel datapaths. CoreSight provides integrated debug visibility, while the FPGA fabric allows designers to partition an application among software, dedicated processors, and programmable logic. The main technical benefit is reduced system integration compared with separate processor and FPGA designs. Software-controlled logic can accelerate tasks such as data formatting, packet handling, sensor acquisition, and interface conversion. The integrated architecture also reduces board-level interconnects between the processor and programmable logic. Migration between the XC7Z020, XC7Z010, and related Zynq-7000 devices requires reviewing memory, pinout, power, and device-specific constraints rather than assuming interchangeability. Typical applications include industrial control gateways, camera and machine-vision systems, communications equipment, embedded data acquisition, network appliances, and test systems. In each case, the Cortex-A9 cores can run operating-system-level software while the Artix-7 fabric handles parallel interfaces or accelerates data movement. The exact processor memory capacities, I/O counts, power rails, and signal parameters must be selected from the manufacturer data sheet for the complete device family. PCB implementation requires careful treatment of the 400-ball BGA, multiple power and ground domains, high-speed memory routing, and decoupling. Use the manufacturer package pinout files and the CLG400 footprint when assigning ball assignments; do not infer the 400-ball pinout solely from the package dimensions. Validate power sequencing, voltage thresholds, decoupling values, and high-speed layout against the relevant Zynq-7000 implementation guidance. This page consolidates the exact device identity, package information, lifecycle position, comparison points, and application-oriented design guidance for engineers evaluating XC7Z020-1CLG400CES replacements or planning a CLG400-based Zynq-7000 PCB.

RFC Hubungi kami
XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD
XC7Z020-1CLG400I

XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD

The AMD XC7Z020-1CLG400I is a programmable system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric, 85K logic cells, and a 667 MHz processor clock in a 400-CSPBGA package measuring 17 x 17 mm. The device also includes CoreSight debug and observation resources. This combination integrates hard-processor and programmable-logic functions on one package, making the XC7Z020 suitable for embedded control, data processing, industrial automation, communications, and test systems. A Zynq-7000 SoC is a heterogeneous embedded computing device that combines an Arm Cortex-A9 application processing unit with an FPGA fabric. The processor executes operating-system and application software, while the programmable logic implements parallel data paths, custom interfaces, accelerators, and signal-processing functions. This product hierarchy places the XC7Z020 at the intersection of embedded processors, FPGA and CPLD devices, and application-specific programmable SoCs. The principal device attributes include dual Arm Cortex-A9 processor cores, 85K FPGA logic cells, a stated 667 MHz Cortex-A9 operating frequency, CoreSight capabilities, and a 400-CSPBGA package. The integrated architecture allows software-controlled systems to place time-critical or highly parallel operations in FPGA logic while retaining conventional program flow in the processor subsystem. Pin-compatible ordering options within the CLG400 family can support different speed, temperature, or power configurations when the device qualification and operating requirements are compatible. The processor-based portion provides an Arm-based execution environment for control software, networking stacks, and embedded applications. The FPGA portion provides programmable combinational and sequential logic alongside fixed I/O resources, allowing designers to implement custom peripherals, data acquisition paths, protocol accelerators, or high-throughput parallel processing. Because both domains share the package and system fabric, interconnect between software and programmable logic can be established according to the AMD Zynq architecture and supported interfaces. Typical implementations include industrial programmable logic controllers, factory monitoring gateways, camera and image-processing modules, medical instrumentation, industrial networking equipment, and embedded test platforms. In these systems, the Cortex-A9 cores can manage protocols and supervisory functions while FPGA logic accelerates sampling, filtering, encoding, or interface handling. The CLG400 package is particularly relevant to dense embedded designs where a large pin count, compact 17 x 17 mm body, and mixed processor-logic implementation are required. PCB implementation requires careful allocation of power, ground, high-speed memory, and configurable I/O resources. Follow the AMD package pinout files and XC7Z020 data sheet for the exact CLG400 ball assignments, recommended power sequencing, decoupling, and differential-pair routing. Confirm the selected board configuration, memory interface implementation, and peripheral assignments with the complete Vivado design before fabrication. This product page combines the identifiable processor, FPGA, package, and sourcing characteristics of the XC7Z020-1CLG400I with package-focused alternatives, engineering design notes, and a parameter comparison intended to accelerate component selection and board-level planning.

RFC Hubungi kami
XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD
XC7Z020-1CLG484C

XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD

The AMD XC7Z020-1CLG484C is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 484-CSPBGA package. The device provides 85,000 logic cells, operates at 667 MHz, and integrates CoreSight debug capabilities into a single 19 mm by 19 mm package. This combination allows software-controlled processing and programmable hardware acceleration to share one device. A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories. The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications. The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing. Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution. PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout. This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.

RFC Hubungi kami
XC7Z020-1CLG484CES - 85K Logic Cell Zynq SoC | AMD
XC7Z020-1CLG484CES

XC7Z020-1CLG484CES - 85K Logic Cell Zynq SoC | AMD

The AMD XC7Z020-1CLG484CES is a Zynq-7000 Artix-7 system-on-chip with 85K logic cells, a dual-core ARM Cortex-A9 MPCore processor operating up to 667 MHz, CoreSight debug support, and 256 KB of on-chip memory. It is supplied in a 484-ball CSPBGA package measuring 19 mm by 19 mm. The device combines programmable logic with an embedded application processor and programmable real-time I/O in one integrated silicon platform. A Zynq system-on-chip is a heterogeneous embedded platform that combines an ARM microprocessor system with an FPGA fabric, memory controllers, and high-speed programmable I/O. It belongs to the FPGA and CPLD category while also functioning as a processor-based SoC. This architecture allows hardware acceleration, parallel control, interface adaptation, and software-controlled application processing to share one package and interconnect. The target MPN provides 85K logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debugging in the CLG484 package. Its integrated processor supports programmable real-time I/O alongside the FPGA fabric, making the device useful for demanding control systems rather than simple fixed-function logic. The CLG484 package offers substantially more balls than smaller Zynq packages, supporting a broader set of programmable I/O and power connections. The Zynq-7000 architecture separates the processing system from the programmable logic while allowing shared access to DDR memory and peripherals. This separation supports hard real-time control tasks in hardware while the ARM processor handles operating systems, networking, data processing, and user applications. Exact resource counts, memory capacity, voltage requirements, and package dimensions beyond those identified for this device should be confirmed in AMD data sheet DS187 before final design release. Typical uses include industrial Ethernet gateways, machine vision, industrial automation, embedded networking, camera processing, communications equipment, and test systems. The 667 MHz dual-core processor provides useful control bandwidth, while 85K logic cells allow parallel datapaths, protocol bridges, and hardware accelerators to be implemented alongside software. In a camera system, for example, programmable logic can perform image pre-processing before the ARM subsystem handles network management or higher-level analysis. PCB implementation requires careful treatment of the 484-ball BGA footprint, power sequencing, decoupling, and high-speed routing. Confirm the complete ball map, voltage rails, and differential I/O constraints from the AMD package pinout files and DS187. Treat the processor, memory interface, and programmable I/O requirements as separate design domains so each rail, reference plane, and high-speed route is validated for its intended signal class. This product summary combines the verified device identity, package information, processor configuration, and architectural role with engineering guidance for evaluating the XC7Z020-1CLG484CES in embedded FPGA, industrial, networking, and machine-vision systems. It also distinguishes the device from speed- and temperature-code variants while preserving the strict CLG484 footprint requirement for drop-in comparisons.

RFC Hubungi kami
XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx
XC7Z020-1CLG484I

XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx

The AMD/Xilinx XC7Z020-1CLG484I is a Zynq-7000 All Programmable System-on-Chip (AP SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with 667MHz core clock, together with Artix-7 programmable logic of 85K logic cells, all housed in a 484-ball CSBGA (CLG484) package measuring 19x19 mm. It is the -1 speed grade, industrial temperature range variant of the XC7Z020 family. A SoC FPGA such as the Zynq-7000 is a single silicon device that fuses a hard processor subsystem (HSS) and a soft FPGA fabric. The processor subsystem runs software (Linux, RTOS, bare-metal), while the programmable logic provides hardware acceleration, custom I/O, and parallel data-path extensions. Zynq-7000 devices sit within the broader taxonomy of heterogeneous compute devices, alongside MPSoC and Versal Adaptive SoC families from AMD/Xilinx. This hybrid architecture is ideal for embedded systems that require both deterministic real-time control and high-throughput data processing. Key features include dual ARM Cortex-A9 cores with NEON SIMD and single/double precision FPU, on-chip L1 caches (32 KB I-cache, 32 KB D-cache per core) and 512 KB L2 cache, integrated Memory Controller for DDR3/DDR3L/LPDDR2, dual USB 2.0 OTG, dual Gigabit Ethernet MACs, dual SD/SDIO controllers, and 2x UART, 2x SPI, 2x I2C peripheral interfaces. The integrated Artix-7 FPGA fabric includes 85K logic cells, 4.9 Mb block RAM, and 220 DSP slices. The Zynq-7000 architecture uses a tightly coupled AXI interconnect between the PS and PL, allowing hardware-accelerated peripherals to communicate with the processor at high bandwidth with predictable latency. The CLG484 package exposes multiple high-performance (HP) and high-range (HR) I/O banks for DDR interfacing and general-purpose I/O. Typical applications include industrial motor drives, machine vision, software-defined radio, ADAS driver assistance systems, medical imaging, and embedded vision. The wide temperature range and -1 speed grade make the XC7Z020-1CLG484I well suited for industrial control and factory automation. When designing with this device, careful attention must be paid to PCB layout, power-rail sequencing, and DDR signal integrity. Use Vivado Design Suite and Vitis for hardware/software co-design, and refer to the official Zynq-7000 datasheet (DS187) and PCB design guide (UG933). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $45.94 Dalam Stok
XC7Z020-2CLG400CES - 85K Zynq-7000 SoC | AMD
XC7Z020-2CLG400CES

XC7Z020-2CLG400CES - 85K Zynq-7000 SoC | AMD

The AMD XC7Z020-2CLG400CES is a Zynq-7000 Artix-7 system-on-chip integrating 85K FPGA logic cells with a dual-core ARM Cortex-A9 MPCore processor operating at 766 MHz. It also includes CoreSight debug resources and is packaged in a 400-CSPBGA package measuring 17 x 17 mm. This combination places programmable logic, hard real-time processing, and high-speed connectivity in one device. A Zynq-7000 SoC belongs to the FPGA and programmable-logic hierarchy while extending the platform into the system-on-chip category. Unlike a conventional FPGA paired with a separate microprocessor, the Zynq architecture integrates the ARM processing system and programmable logic on one silicon device. Designers can assign control functions, interfaces, or real-time tasks to the processor while implementing parallel datapaths, protocol engines, and accelerators in the FPGA fabric. The headline features of the XC7Z020 include 85K logic cells, a 766 MHz Cortex-A9 processor configuration, a dual-core ARM Cortex-A9 MPCore subsystem, CoreSight debug capability, and the 400-CSPBGA package. The large ball-grid array provides extensive I/O and power-distribution options for designs requiring high-speed memory, serial links, parallel interfaces, or multiple voltage domains. Its integrated processor supports a software-defined control architecture alongside hardware-level parallelism. In the Artix-7 FPGA fabric, the XC7Z020 supports programmable logic resources for digital signal processing, image and video pipelines, protocol conversion, data acquisition, and hardware acceleration. The processing system handles application software, control logic, networking, and operating-system tasks. CoreSight enables integrated debug and trace workflows that assist engineers in verifying processor execution and hardware-accelerated designs during development and validation. Typical applications include industrial automation and factory control, industrial networking, machine vision, video processing, secure communications, embedded edge computing, and high-speed data acquisition. Its 766 MHz processor supports Linux or real-time operating-system workloads, while the FPGA fabric can accelerate filtering, encryption, compression, or custom interface logic that would otherwise burden the CPU. PCB design requires careful attention to the 17 x 17 mm CSPBGA footprint, power rails, decoupling, ball escape routing, and high-speed signal integrity. Use the AMD package pinout files and DS187 data sheet to assign every power, ground, configuration, clock, and I/O ball before layout release. Confirm the selected companion memory, transceivers, regulators, and clocking components against the device reference design. This page combines the manufacturer data-sheet details with package, sourcing, comparison, and design guidance. It also identifies four same-package Zynq-7000 ordering alternatives while separating pin-compatible options from devices that require a board or package change.

RFC Hubungi kami
XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD
XC7Z020-2CLG400E

XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD

The AMD XC7Z020-2CLG400E is a Zynq-7000 programmable system-on-chip combining a dual-core ARM Cortex-A9 processor with an Artix-7 FPGA, 85K logic cells, and a maximum processor frequency of 766 MHz in a 400-CSPBGA package measuring 17 x 17 mm. The device integrates programmable logic with a hard processor subsystem and CoreSight debug capabilities for Linux-based embedded systems. A Zynq SoC is an FPGA and microprocessor integrated into one semiconductor package. Its hierarchy spans system-on-chip, programmable logic device, FPGA, and embedded processor platform. This integration allows software-controlled algorithms, interfaces, and control logic to operate within one device, reducing component count and simplifying data exchange between the processor and programmable fabric. Principal features include dual ARM Cortex-A9 MPCore processing, 85K FPGA logic cells, CoreSight debugging, and operation in the CLG400 CSPBGA package. The integrated processor runs at up to 766 MHz, while the Artix-7 fabric supports parallel logic, digital signal processing, and programmable I/O. These resources suit industrial control, communications, image processing, embedded vision, and test systems that need both deterministic hardware logic and a conventional operating system. The architecture separates software tasks from programmable hardware. ARM software handles networking, control, and an operating environment, while FPGA logic accelerates data acquisition, filtering, protocol handling, or other timing-sensitive workloads. Direct communication between the processor and programmable logic avoids external FPGA-to-SoC interfaces while allowing parallel data paths to be implemented efficiently. Typical deployments include camera-based inspection, industrial gateways, networked sensor controllers, programmable automation equipment, and embedded communications platforms. The 400-ball package supports dense board layouts but requires careful escape routing, multilayer PCB construction, and controlled power and ground distribution. Designers should follow the AMD package pinout files and Zynq-7000 power guidance when defining ball assignments and layer transitions. The primary design trade-off is integration against package complexity. A Zynq SoC can replace a separate processor and FPGA while consolidating control and accelerated logic, but the CLG400 BGA footprint demands careful fanout, via planning, signal-integrity control, and assembly process control. A power design that satisfies processor, FPGA, I/O, and auxiliary supply requirements is equally essential. This product record combines the manufacturer data-sheet identity, exact package and processor characteristics, sourcing information, same-footprint alternatives, and practical PCB guidance. It also distinguishes speed- and temperature-grade variants so engineers can assess replacement suitability without assuming that a similar suffix guarantees equivalent production requirements.

RFC Hubungi kami
XC7Z020-2CLG400I - Dual Cortex-A9 85K Zynq SoC | AMD
XC7Z020-2CLG400I

XC7Z020-2CLG400I - Dual Cortex-A9 85K Zynq SoC | AMD

AMD XC7Z020-2CLG400I is a Zynq-7000 Artix-7 FPGA system on chip integrating a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug technology, 85K programmable logic cells, and a 766 MHz processor operating point in a 400-CSPBGA package measuring 17 mm by 17 mm. It combines programmable hardware logic with an embedded ARM processing system on one device. A Zynq-7000 system on chip belongs to the FPGA & CPLD and embedded processor-device hierarchy. Unlike a conventional microcontroller, which executes instructions entirely in software, the Zynq architecture allows control and data-processing code to run on the ARM Cortex-A9 MPCore processor while independent algorithms, interfaces, and accelerators execute in parallel within the Artix-7 programmable logic. This heterogeneous architecture provides software flexibility alongside hardware-level parallelism and deterministic control capability. The XC7Z020 device provides 85K logic cells for FPGA fabric and a maximum listed processor frequency of 766 MHz. Its dual-core Cortex-A9 MPCore configuration supports concurrent processing, while CoreSight provides integrated debug and trace capabilities. The -2 design suffix identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. These ordering details are important when replacing another Zynq-7000 member on an existing board. Technically, the device combines hard processor logic with programmable FPGA resources rather than implementing the ARM processor itself in soft logic. This division allows software to manage control flow, operating systems, communication stacks, or application logic while the FPGA fabric handles parallel datapaths, custom interfaces, video processing, or signal-processing pipelines. The fixed ARM subsystem and programmable fabric share access to memory and programmable I/O resources at the device level. XC7Z020-2CLG400I is suitable for industrial embedded control, networked data acquisition, industrial Ethernet, machine vision, test and measurement, communications equipment, and custom accelerator systems. The 400-CSPBGA package supports compact designs requiring numerous high-density connections, although its fine pitch requires careful PCB layout, controlled impedance routing, dense decoupling, and manufacturing capability suited to advanced BGA assemblies. Designers should select the CLG400 package outline and land pattern directly from the manufacturer package documentation, use the complete power, ground, decoupling, configuration, clock, and I/O requirements from the official device documentation, and validate signal integrity and manufacturing yield at the chosen BGA process capability. Device programming, security configuration, clocking, and reset behavior must also be verified for the target board before production release.

RFC Hubungi kami
XC7Z020-2CLG484CES - 766MHz Dual-Core Zynq SoC | AMD
XC7Z020-2CLG484CES

XC7Z020-2CLG484CES - 766MHz Dual-Core Zynq SoC | AMD

The AMD XC7Z020-2CLG484CES is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug support and 85,000 FPGA logic cells. It operates at 766 MHz and is housed in a 484-CSPBGA package measuring 19 mm by 19 mm. This combination integrates hard real-time processing, programmable logic, memory interfaces, and high-speed peripherals on one device. A Zynq-7000 SoC belongs to the FPGA and CPLD product category while also functioning as an application processor. Its integrated processing system executes operating systems and application software, while its programmable logic fabric implements custom accelerators, interfaces, protocols, and real-time datapaths. This combination makes the device useful when a design requires more flexibility than a discrete microcontroller but more processing capability than a conventional programmable logic device. The XC7Z020-2CLG484CES provides 85,000 logic cells and a maximum stated operating frequency of 766 MHz in the device listing. Its dual Arm Cortex-A9 architecture supports parallel application execution, while CoreSight provides integrated processor debug visibility. The 484-CSPBGA package exposes the programmable logic, processing system, power, clock, configuration, and memory interfaces through a dense 19 mm by 19 mm ball-grid array. Technologically, the Zynq-7000 architecture separates the ARM processing system from the FPGA fabric rather than embedding a soft processor in LUT-based logic. Firmware runs on the Arm cores, while hardware blocks can exchange data with the processor through tightly coupled interfaces. This division allows control software and hardware acceleration to operate concurrently, reducing the need for external processors or discrete accelerator devices. Typical uses include industrial control gateways, networked embedded systems, camera and image-processing systems, programmable automation equipment, communications infrastructure, and embedded data-acquisition platforms. The integrated processor handles control functions, networking stacks, and application logic, while the programmable fabric can accelerate data movement or implement device-specific interfaces. PCB design requires careful attention to the 484-CSPBGA footprint, multilayer escape routing, power and ground distribution, and thermal management. Use AMD package pinout files and the XC7Z020 data sheet when assigning every ball and power rail. The exact pin assignments and decoupling requirements should be checked against the latest manufacturer documentation before layout release. This page consolidates the confirmed processor, logic-cell, frequency, and package characteristics, plus practical comparison and selection guidance. It also distinguishes speed- and temperature-grade alternatives that can reuse the same CLG484 footprint while helping engineers assess whether their design requires a lower-speed, industrial-temperature, or extended-temperature replacement.

RFC Hubungi kami
XC7Z020-2CLG484E - 85K Zynq SoC, 766MHz | AMD
XC7Z020-2CLG484E

XC7Z020-2CLG484E - 85K Zynq SoC, 766MHz | AMD

The AMD XC7Z020-2CLG484E is a heterogeneous Zynq-7000 system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processing system, CoreSight debug capability, and an Artix-7 FPGA fabric with 85K logic cells. The device operates at up to 766 MHz and is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. A Zynq system-on-chip combines a programmable logic device with an embedded Arm processor in one silicon device. This integration places the processing system and FPGA fabric on the same die while retaining separate configuration, memory, peripheral, and I/O resources. The result is a platform suitable for systems that require both deterministic hardware acceleration and operating-system-capable application processing. The XC7Z020 includes an FPGA fabric with 85K logic cells, supporting parallel hardware functions that can execute alongside the dual Arm Cortex-A9 cores. CoreSight provides integrated debug and trace support for software development and hardware-assisted verification. The CLG484 option offers 484 package balls in a 19 mm by 19 mm CSPBGA format for compact embedded-system designs. The -2 device code denotes speed grade 2, while the E suffix identifies the extended-temperature ordering option associated with the product family. The listed operating-temperature range is 0 °C to +100 °C. The -2 speed grade reaches 766 MHz in the manufacturer listing, making it a mid-performance member of the Zynq-7000 range. Typical uses include industrial control, camera and image processing, industrial networking, embedded data acquisition, communications equipment, and edge-processing systems. The Arm processor can control operating-system-level functions, while the programmable logic fabric can implement parallel data paths, custom interfaces, accelerators, or deterministic I/O handling. PCB implementation requires careful BGA layout, power planning, decoupling, and thermal management. Designers should use the AMD package pinout files and the Zynq-7000 data sheet when assigning balls, memory interfaces, I/O standards, and power rails. Vivado-compatible constraints and the selected board device also need to match the exact ordering code before implementation begins. This product record combines the verified device identity, package, operating information, alternate-ordering references, and practical engineering guidance. It also highlights where design decisions require the official AMD pinout files, power guidance, and timing documentation rather than generic package assumptions.

RFC Hubungi kami
XC7Z020-2CLG484I - Zynq-7000 SoC 85K Logic Cells | AMD
XC7Z020-2CLG484I

XC7Z020-2CLG484I - Zynq-7000 SoC 85K Logic Cells | AMD

The AMD XC7Z020-2CLG484I is a Zynq-7000 All Programmable SoC (AP SoC) integrating a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 class FPGA fabric in a single 484-ball CSPBGA (19x19 mm) package. The processor subsystem runs at up to 766 MHz with CoreSight debug, while the programmable logic provides 85,000 logic cells, 53,200 LUTs, 106,400 flip-flops, 220 DSP slices, and 4.9 Mb of block RAM. A System on Chip (SoC) is an integrated circuit that consolidates processor, memory controllers, peripherals, and programmable hardware on a single substrate. The Zynq-7000 family pairs an ARM-based processing system (PS) with programmable logic (PL) over high-bandwidth AXI interfaces, reducing board space, power, and system complexity versus discrete processor-plus-FPGA solutions. Key features include a DDR3/DDR3L memory controller with ECC, USB 2.0, Gigabit Ethernet, and support for I/O voltages of 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The -2 speed grade supports up to 766 MHz PS operation and 200 MHz+ fabric clocking. The industrial temperature grade (-40C to +100C) targets harsh environments. Architecturally, the PS and PL are independent power domains with defined sequencing requirements (VCCINT, VCCAUX, VCCBRAM, VCCO). The device supports partial reconfiguration, allowing dynamic PL updates while the PS continues running. The memory controller delivers robust DDR3/DDR3L with ECC for industrial and automotive-class designs. Typical applications include motor control, industrial automation, software-defined radio, video processing, and embedded vision. The device suits real-time processing with hardware acceleration, such as machine vision and high-speed data acquisition. Design consideration: ensure correct power-rail sequencing and provide a configuration source (QSPI flash) and PS clock; refer to the Zynq-7000 TRM (UG585) for detailed guidance. Pricing from $60.07 (LCSC, as of 2026-08-29).

USD $49.00 Hubungi kami