EPM3512AQC20810N
EPM3512AQC20810N - MAX 3000A CPLD 512 Macro Cells 208-PQFP | Altera
The Intel (formerly Altera) EPM3512AQC20810N is a member of the MAX 3000A family of Complex Programmable Logic Devices (CPLDs), offering 512 macro cells, 10,000 usable gates, and 172 user I/Os in a 208-pin Plastic Quad Flat Pack (PQFP) package. It features a 10 ns pin-to-pin propagation delay and is fabricated on a 3.3 V EEPROM-based process, making it suitable for 5.0 V tolerant I/O systems with 3.3 V core operation. The device supports in-system programmability via the IEEE Std. 1532 compliant JTAG interface, enabling concurrent ISP from multiple PLD vendors.
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macro cell arrays on a single chip with a programmable interconnect matrix. CPLDs sit between simple glue-logic gates and high-density FPGAs in the programmable logic hierarchy, offering deterministic timing, instant-on operation from on-chip EEPROM, and predictable I/O behavior. The MAX 3000A family is part of the broader programmable logic taxonomy (CPLD -> programmable logic -> digital IC -> semiconductor), targeting bus-interface, glue-logic, and state-machine applications where non-volatility and fast propagation delays matter more than raw gate density.
Key features of the EPM3512AQC20810N include 172 user I/O pins, 512 macro cells distributed across 16 logic array blocks (LABs), 12 product terms per macro cell, and a global clear signal. The 208-pin PQFP package provides generous I/O count for parallel bus bridging and address decoding functions. The 10 ns tPD supports high-speed glue logic, while the 3.3 V core (with 5.0 V tolerant I/O) simplifies interface to legacy 5 V microprocessors and memories. The on-chip EEPROM configuration memory eliminates the need for external boot devices and enables instant-on logic operation.
The MAX 3000A architecture uses a classic MAX-based structure with each macro cell containing a programmable AND/OR array, a configurable flip-flop, and product-term allocation logic. The LAB interconnect is non-segmented and predictable, which is why engineers choose this family when deterministic timing (compile-time static delays) is required for asynchronous interfaces, decoder logic, or interrupt prioritization. The JTAG (IEEE 1149.1) and ISP (IEEE 1532) interfaces allow board-level programming and boundary-scan testing without removing the device from the circuit.
Typical applications include processor bus-interface bridging (e.g., 8-bit MCU to 16-bit or 32-bit peripheral), address decoding and chip-select generation, glue-logic integration, interrupt controllers, state-machine controllers in motor drive and industrial automation, and legacy 5 V system modernization. The device is widely used in industrial, telecom, and embedded designs that benefit from instant-on programmable logic without external boot ROM.
When designing with the EPM3512AQC20810N, observe the 3.3 V core supply requirement and verify all I/O banks are powered within the recommended operating range. Decouple VCCINT and VCCIO pins with 0.1 uF ceramic capacitors placed close to each power pin, and route JTAG signals (TCK, TMS, TDI, TDO) away from high-current switching traces. Consult the MAX 3000A family datasheet for the exact pinout, JTAG programming waveforms, and recommended footprint for the 208-pin PQFP.
This page synthesizes distributor pricing, parametric comparison data, and practical design notes for the EPM3512AQC20810N that complement the manufacturer datasheet with drop-in alternatives and application-specific guidance.
RFC
Hubungi kami