LTC2373CUH-18
LTC2373CUH-18 - 18-Bit, 1Msps, 8-Ch SAR ADC | Analog Devices
The Analog Devices LTC2373CUH-18 is a 18-bit, 1 Msps successive-approximation-register (SAR) analog-to-digital converter with eight multiplexed input channels, 100 dB SNR, and an integrated 2.048 V temperature-compensated reference, housed in a 32-pin QFN (5x5 mm) package. It operates from a single 5 V supply and supports a highly configurable, low-crosstalk input MUX that accepts fully differential, pseudo-differential unipolar, and pseudo-differential bipolar input ranges, making it well-suited for multiplexed data acquisition systems. The device delivers 100 dB SNR at the 1 Msps full sampling rate and dissipates only 27 mW typical power.
What is a SAR ADC? A successive-approximation-register ADC is a sampled-data converter that uses a binary-search algorithm against an internal DAC to digitize each input sample in N clock cycles (one per bit). SAR ADCs sit at the intersection of precision (typically 12-20 bits) and speed (100 ksps to multi-Msps), and they need no continuous settling current like delta-sigma converters. Within the data converter hierarchy, SAR ADCs are a subfamily of analog-to-digital converters (ADC), which are part of the data acquisition and signal-chain IC family, used wherever a precise snapshot of an analog voltage is required. The LTC2373-18 combines this SAR architecture with a wide-input multiplexed front end, programmable sequencer, and integrated reference to form a complete multi-channel precision front end.
Key features include an onboard low-drift (20 ppm/°C max) 2.048 V reference, a single-shot-capable reference buffer, a high-speed SPI-compatible serial interface that supports 1.8 V, 2.5 V, 3.3 V, and 5 V logic, and a programmable sequencer with depth 16. The 32-QFN (5x5) package provides an exposed pad for thermal relief, enabling continuous 1 Msps operation across the -40 °C to +85 °C commercial temperature range. An internal oscillator sets the conversion time, eliminating the need for an external high-frequency clock source.
Architecturally, the LTC2373CUH-18 pairs a charge-redistribution DAC array with a precision comparator and a low-noise input front end that is fully differential to reject common-mode disturbances. The integrated reference and reference buffer reduce external BOM cost while preserving low drift across temperature, and the programmable sequencer allows autonomous channel cycling without microcontroller intervention for each conversion, offloading channel-management overhead in high-channel-count systems.
Typical applications include industrial process control and programmable logic controller (PLC) analog input modules, multi-channel data acquisition systems, instrumentation and test equipment, medical instrumentation front ends, and precision sensor signal conditioning. The 100 dB SNR and 18-bit resolution make the part particularly attractive where the dynamic range of multiple channels must be captured simultaneously.
A key design consideration is channel acquisition time: at full 1 Msps throughput with a fully-differential input, settle the input amplifier to 18-bit accuracy within the acquisition window. For higher-impedance sources, an ADA4528 buffer may be inserted in front of each MUX channel. Always decouple REFOUT with the manufacturer-recommended capacitor network and route CNV, SCK, and SDO as short match-length pairs to avoid aperture jitter from degrading SNR.
This page consolidates distributor pricing, drop-in same-package alternatives, comparison data, and practical design notes that go beyond the manufacturer datasheet alone.
RFC
Hubungi kami