Litar Bersepadu

AD9237BCPZ-65

AD9237BCPZ-65 - 12-Bit, 65 MSPS, 3V Low-Power ADC | Analog Devices

The Analog Devices AD9237BCPZ-65 is a 12-bit, 65 MSPS, single 3 V supply, low-power analog-to-digital converter (ADC) housed in a 32-pin LFCSP-WQ (5 mm x 5 mm) package with exposed thermal pad. The part integrates a high-performance sample-and-hold amplifier (SHA), an internal voltage reference, and a pipelined core that delivers 65 MSPS conversion rate while drawing approximately 200 mW (typical) from AVDD = 3 V. Differential analog inputs support 2 V p-p full-scale swing; output data is presented as TTL/CMOS-compatible words on a single 12-bit parallel bus. The differential input architecture preserves SFDR and SNR in IF and baseband undersampling systems, making the part well-suited to communications, ultrasound, and instrumentation front ends. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts a continuous-time, continuous-amplitude analog waveform into a discrete-time, discrete-amplitude digital word. In the product taxonomy, the AD9237BCPZ-65 sits under ADC > data converter > mixed-signal IC > semiconductor. Pipeline ADCs such as this use a cascaded switched-capacitor architecture with a back-end digital correction block to reach sample rates from tens to hundreds of MSPS while dissipating far less power than full-flash converters - the converter IC is therefore a power-management-adjacent subsystem that sits between analog signal-conditioning circuitry and an FPGA, DSP, or dedicated clock-and-timing block in the broader signal chain. Key specifications include 12-bit resolution, 65 MSPS maximum sample rate, 69 dB SNR (typical at 65 MSPS with 2 V p-p input), 80 dBc SFDR, an internal 1.0 V reference (with optional external reference drive), and a 3 V analog supply (AVDD) plus a 2.5 V driver supply (DRVDD). The 32-pin LFCSP-WQ exposes the analog inputs, clock input, data outputs, and reference pins, while an exposed die paddle provides a low-theta thermal path required for sustained full-rate operation without derating. Pipeline architecture with 5-bit-per-stage residue gain supports 65 MSPS throughput while keeping per-sample latency low; the digital output stage is synchronized to the rising or falling input clock edge and can drive a 2.5 V CMOS bus into an FPGA capture stage. The proprietary SHA maintains > 250 MHz input bandwidth, enabling IF undersampling of carriers up to about 100 MHz. Typical applications include medical ultrasound imaging receivers, communications IF sampling (GSM/EDGE/UMTS baseband), portable instrumentation and data acquisition, and digital oscilloscope front ends. Its wide input bandwidth also supports CCD/CIS imaging and consumer video digitizers in the 20-65 MSPS class. Designers should follow the recommended layout pattern of separating AVDD/DRVDD planes and routing differential analog inputs as a 100 ohm matched pair into the ADC. The exposed paddle must be soldered to a low-impedance ground pour to keep junction rise below the 125 C operating limit; failure to do this is the most common cause of field failures in 65 MSPS pipeline ADCs. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and design guidance not aggregated on any single manufacturer or distributor page.

RFC Hubungi kami

AD9237BCPZRL7-20

AD9237BCPZRL7-20 - 12-Bit 20 MSPS 3V Low Power ADC | Analog Devices

The Analog Devices AD9237BCPZRL7-20 is a 12-bit, 20 MSPS, monolithic pipelined analog-to-digital converter (ADC) that operates from a single 3 V analog supply and a 2.5 V digital driver supply, housed in a 32-lead LFCSP-WQ (5 mm x 5 mm) package. The -20 speed grade delivers 20 MSPS conversion with 66 dBc SNR to Nyquist at 65 MSPS family maximum, ±0.7 LSB DNL, and 80 dBc SFDR to Nyquist at 65 MSPS, optimizing for ultra-low power consumption in compact multi-channel systems. An ADC is a data converter that transforms continuous analog input signals into discrete digital codes for downstream processing by DSPs, FPGAs, or microcontrollers. The AD9237 family sits at the interface between the analog front-end (amplifiers, filters, sensors) and the digital signal-processing chain, and belongs to the broader category of Nyquist-rate, switched-capacitor, pipeline ADCs. The pipeline architecture uses multiple low-resolution flash stages with inter-stage residue gain and digital error correction, achieving both high sample rate and low latency while consuming milliwatts of power. Key features include a differential analog input stage with selectable input spans from 1 V p-p to 4 V p-p, an on-chip high-performance sample-and-hold amplifier (SHA), an internal 1.0 V voltage reference, and a CMOS-compatible output stage with an Output Enable pin for bus multiplexing. The ADC consumes only 65 mW typical at 20 MSPS with AVDD = 3 V, making it one of the lowest-power 12-bit ADCs of its speed class. The pin-compatible AD9235 (12-bit, 20/40/65 MSPS) further simplifies system migration paths and reduces design complexity across product generations. The AD9237 uses a differential switched-capacitor pipeline core with proprietary SHA architecture that minimizes distortion at the front-end and supports a wide common-mode input range, allowing direct DC-coupling from differential drivers such as the AD8138 or AD8352. The on-chip bandgap reference and reference buffer maintain low temperature drift, and the Output Enable pin allows multiple ADCs to share a digital bus, simplifying board routing in multi-channel systems. Typical applications include portable and battery-powered imaging systems, medical ultrasound front-ends, low-cost I/Q baseband digitizers, hand-held oscilloscope input channels, and industrial inspection cameras. The wide input range scaling also makes it suitable for IF sampling in software-defined radio receivers. When designing with the AD9237BCPZRL7-20, ensure the analog and digital grounds are star-connected to the exposed pad thermal/epitaxy paddle, which must be soldered to a low-impedance ground plane for electrical performance and thermal dissipation. Use a differential input drive topology with a balun or fully differential amplifier for optimum SFDR, and decouple AVDD and DRVDD with 0.1 uF and 10 uF ceramic capacitors placed within a few millimeters of each supply pin.

RFC Hubungi kami

AD9237BCPZRL7-65

AD9237BCPZRL7-65 - 12-Bit 65 MSPS ADC, 32-LFCSP | Analog Devices

The Analog Devices AD9237BCPZRL7-65 is a 12-bit, 65 MSPS monolithic pipelined analog-to-digital converter (ADC) with a high-performance sample-and-hold amplifier and integrated voltage reference, supplied from a single 3 V rail and housed in a 32-lead LFCSP-WQ (5x5 mm) package. The AD9237 family is offered in 20 MSPS, 40 MSPS, and 65 MSPS speed grades; this -65 variant is the top-speed member. According to the Analog Devices datasheet, the part is pin-compatible with the AD9235 (a 12-bit 20/40/65 MSPS ADC) enabling drop-in upgrades, and delivers 66 dBc SNR and 80 dBc SFDR to Nyquist at 65 MSPS with ±0.7 LSB DNL. What is a pipelined ADC? A pipelined analog-to-digital converter is a high-speed, multi-stage switched-capacitor architecture that resolves a few bits per stage and combines them with a digital correction stage. Compared to successive-approximation register (SAR) and flash ADCs, pipelined ADCs dominate the 10-250 MSPS range because they deliver the highest sampling rate at moderate resolution (8-14 bits) while keeping die size, power, and cost low. As a member of this category, the AD9237BCPZRL7-65 sits in the broader hierarchy: ADC -> data converter -> signal chain IC -> mixed-signal semiconductor. Key features include a flexible analog input range from 1 V p-p to 4 V p-p (differential inputs with adjustable common-mode), an output enable pin for bus multiplexing, internal voltage reference, and ultralow power dissipation scaled to speed grade (lowest at 20 MSPS, highest at 65 MSPS). The single 3 V supply and small 5x5 mm LFCSP footprint make it suited for portable and densely populated boards. Typical applications include communications IF sampling, ultrasound imaging receive channels, portable instrumentation, and low-cost medical imaging front-ends. The output enable pin is useful when multiple ADCs share a digital bus for interleaved or multiplexed data capture. Design tip: the analog inputs are differential - drive them with a low-impedance differential amplifier (such as an AD8138 or ADA4937) for best SFDR, and keep the input common-mode voltage at AVDD/2 to maximize input swing. Decouple AVDD and DRVDD separately with 0.1 uF and 10 uF capacitors placed within 5 mm of the supply pins.

RFC Hubungi kami

AD9238BSTRL-40

AD9238BSTRL-40 - Dual 12-Bit 40 MSPS ADC | Analog Devices

The Analog Devices AD9238BSTRL-40 is a dual, 12-bit, 40 MSPS analog-to-digital converter (ADC) housed in a 64-lead LQFP (7x7 mm) surface-mount package with integrated voltage reference. It delivers 70 dBc SNR (to Nyquist) and 85 dBc SFDR, operates from a single 3 V supply (2.7 V to 3.6 V), and features dual high-performance sample-and-hold amplifiers (SHAs) with a 500 MHz differential input bandwidth. Power consumption is approximately 330 mW at 40 MSPS across both channels. An ADC (analog-to-digital converter) is an integrated circuit that samples continuous analog signals and converts them into discrete digital codes for processing by FPGAs, DSPs, or microcontrollers. The AD9238 belongs to the pipelined ADC architecture family - sub-flash converters that achieve high sample rates (tens to hundreds of MSPS) at moderate resolution (10-14 bits) by cascading low-resolution stages with digital error correction. Pipelined ADCs sit between successive-approximation (SAR) and flash converters in the speed/resolution hierarchy and dominate communications, imaging, and instrumentation markets. The -40 speed grade offers 40 MSPS sampling per channel (80 MSPS aggregate for interleaved applications), enabling baseband I/Q capture, ultrasound beamforming, and high-speed test instrumentation. Differential inputs with 500 MHz bandwidth tolerate wideband IF sampling for software-defined radio. The integrated 1.0 V reference eliminates an external component, and the on-chip SHAs front-end relaxes the requirement for external op-amp drivers. The device supports CMOS-compatible output levels on dedicated output drivers, simplifying interface to 3.3 V logic. Typical applications include medical ultrasound imaging, communications basestation receivers, low-cost digital oscilloscopes, and IF sampling for software-defined radio. In ultrasound, the dual-channel matched design supports direct-quadrature demodulation; in communications, the high spurious-free dynamic range enables multicarrier receiver architectures. When designing with the AD9238BSTRL-40, drive the analog inputs in a fully differential configuration to maximize SFDR performance. Use a low-jitter clock source (<1 ps RMS) to preserve aperture-jitter-limited SNR at high input frequencies. Decouple AVDD and DRVDD planes close to the package with separate ferrite beads. For best ENOB at the full 40 MSPS rate, operate the device with an input near -0.5 dBFS to leverage the available headroom. This page synthesizes distributor pricing, drop-in same-brand speed-grade alternatives, and practical layout guidance that is not duplicated in the manufacturer datasheet PDF, allowing engineers to make a single-source decision without a second datasheet search.

RFC Hubungi kami

AD9238BSTRL-65

AD9238BSTRL-65 - 12-Bit, 65MSPS Dual ADC | Analog Devices

The Analog Devices AD9238BSTRL-65 is a dual, 12-bit, 65 MSPS analog-to-digital converter (ADC) operating from a single 3 V supply (2.7 V to 3.6 V), packaged in a 64-pin LQFP (7x7 mm). It integrates two high-performance sample-and-hold amplifiers (SHAs) and an internal voltage reference, with a 500 MHz, 3 dB differential input bandwidth and pipelined architecture. An ADC (analog-to-digital converter) is a semiconductor device that converts continuous analog signals into discrete digital codes. The pipelined ADC architecture is the dominant topology for sample rates from 5 MSPS to 250 MSPS because it balances high throughput with low power and small die area. Within the broader hierarchy, the AD9238 sits in the data-converter IC family, which is itself a subset of signal-chain and mixed-signal ICs used to interface real-world analog sensors and transducers with DSPs, FPGAs, and microcontrollers. Key features of the AD9238BSTRL-65 include an SNR of 70 dB to Nyquist, an SFDR of 80.5 to 85 dBc to Nyquist, and low power consumption of approximately 600 mW at 65 MSPS. The integrated dual sample-and-hold amplifiers support simultaneous sampling on both channels, eliminating inter-channel skew for time-aligned I/Q or diversity captures. Differential inputs with 500 MHz bandwidth preserve second-order distortion performance when driven from differential drivers or transformers. Architecturally, the AD9238 combines input buffers, SHA stages, quantizers, and digital error correction in a fully pipelined topology with on-chip reference, allowing the device to deliver 12-bit linearity across the full Nyquist band without external precision components. The 64-LQFP (7x7) package provides a robust thermal envelope and is widely used in instrumentation and communications PCB designs. Typical applications include ultrasound imaging front-ends, communications receivers requiring dual-baseband digitization, IF sampling in software-defined radios, and medical imaging boards. Each channel can be clocked up to 65 MSPS, making the AD9238BSTRL-65 suitable for diversity receivers, MIMO channel cards, and I/Q demodulation in base stations. When designing with this device, place the input decoupling network as close to the analog input pins as possible, route analog and digital grounds separately, and use a clock source with less than 1 ps RMS jitter to preserve SNR. The internal reference is sufficient for most designs, but an external reference can be connected if lower drift is required. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami

AD9238BSTZ-40

AD9238BSTZ-40 - Dual 12-Bit 40 MSPS ADC 64-LQFP | Analog Devices

The Analog Devices AD9238BSTZ-40 is a dual-channel, 12-bit, 40 MSPS pipelined analog-to-digital converter (ADC) housed in a 64-pin LQFP (7x7 mm) surface-mount package. Operating from a single 2.7 V to 3.6 V supply, it consumes 330 mW typical at 40 MSPS and integrates dual sample-and-hold amplifiers plus an internal voltage reference, eliminating the need for external reference components in many designs. An ADC (analog-to-digital converter) is a semiconductor device that converts real-world analog signals into discrete digital codes for processing by microcontrollers, FPGAs, or DSPs. Within the broader signal chain taxonomy, the AD9238 belongs to the data-converter family, specifically the high-speed pipelined ADC sub-family, which sits between successive-approximation register (SAR) ADCs (lower speed, higher precision) and flash ADCs (highest speed, lower resolution). Pipelined ADCs balance speed and resolution, making them the dominant choice for communications, medical imaging, and industrial instrumentation in the 10 to 250 MSPS range. Key specifications include a 70 dB SNR at 9.7 MHz input (per the AD9238 datasheet), 2 V p-p differential input range, and programmable on-chip input bias modes for AC-coupled or DC-coupled signal chains. The device offers flexible digital output formatting - straight binary, twos complement, and gray code - with LVDS-compatible or CMOS output options. A built-in duty-cycle stabilizer (DCS) compensates for clock duty-cycle distortion, preserving SNR across realistic clock sources. The AD9238 uses a multi-stage pipelined architecture with digital error correction. Each stage quantizes a coarse residue, amplified and passed to the next stage, enabling high throughput with moderate hardware cost. The integrated reference and sample-and-hold amplifiers allow compact PCB designs, especially in multi-channel systems where two matched converters share a common clock and reference. Typical applications include IF signal digitization in communications receivers, multi-channel data acquisition, medical ultrasound beamformers, and portable instrumentation. It is also widely used in radar processing and I/Q demodulation paths in software-defined radio. Designers should note that the AD9238BSTZ-40 is pin-compatible with the AD9248 (14-bit) and is offered in speed grades of 20 MSPS, 40 MSPS, and 65 MSPS, allowing a single PCB layout to support multiple performance tiers. Use a low-jitter clock and short, impedance-controlled analog input traces to realize the datasheet's SNR performance. This page synthesizes distributor pricing, drop-in alternatives (same-PCB variants and ADI speed-grade equivalents), and practical design notes not consolidated in the manufacturer datasheet.

RFC Hubungi kami

AD9240AS

AD9240AS - 14-Bit 10 MSPS ADC | Analog Devices

The Analog Devices AD9240AS is a monolithic 14-bit, 10 MSPS analog-to-digital converter operating from a single +5 V supply and packaged in a 44-pin MQFP. It combines an on-chip sample-and-hold amplifier, a programmable voltage reference, and a flexible analog input structure. The converter supports single-ended or differential input interfaces, making it adaptable to imaging, communications, medical, and data-acquisition systems. An ADC is an analog-to-digital converter, a semiconductor that samples an analog voltage and represents it as a numeric code. The AD9240 belongs to the data-converter hierarchy and uses a pipelined conversion architecture. Its 14-bit resolution supports 16,384 digital codes, while its 10 MSPS rating supports acquisition of up to 10 million samples per second. The reported power dissipation is 285 mW. Key features include 2.5 LSB integral nonlinearity, 0.6 LSB differential nonlinearity, and 0.36 LSB input-referred noise. The differential input structure accepts varying input spans and permits single-ended operation as well as differential operation. The on-chip sample-and-hold amplifier is suitable for multiplexed systems that switch full-scale voltage levels between successive samples, reducing the need for external acquisition circuitry. The AD9240's architecture is designed for low-cost, high-speed data acquisition while maintaining the resolution expected from hybrid converters. Its parallel 14-bit output supports direct connection to digital logic, FPGA fabric, DSP input latches, or data-capture hardware when timing and bus-width requirements are carefully matched. The programmable reference can be supplemented by an external reference when dc accuracy or temperature drift requirements exceed the internal-reference requirements. Typical applications include medical imaging, communications receivers, industrial data acquisition, imaging systems, and instrumentation. The differential input path can improve common-mode rejection when the source is balanced, while single-ended input simplifies lower-cost front ends. System designers should verify signal amplitude, reference voltage, clock jitter, output timing, and package-level thermal performance against the manufacturer datasheet. For PCB implementation, treat the analog input and reference paths as sensitive high-speed signal paths. Keep input and reference traces short, use controlled-impedance routing for digital outputs where appropriate, and provide stable bypass capacitance according to the datasheet. Do not infer substitute pin compatibility from similar sampling rates alone; verify the complete pinout, supply requirements, reference voltage, output coding, and timing before replacement. This page consolidates verified AD9240AS product information, package and architecture details, application guidance, and the engineering limits that matter when evaluating the converter or searching for a true drop-in replacement.

RFC Hubungi kami

AD9240ASRL

AD9240ASRL - 14-Bit 10 MSPS ADC | Analog Devices

The Analog Devices AD9240ASRL is a 14-bit, 10 MSPS monolithic analog-to-digital converter with a single analog input, one pipelined conversion path, and a parallel output interface, housed in a 44-pin MQFP package measuring 10 mm by 10 mm. An ADC is a data-acquisition IC that samples an analog voltage and converts it into a digital code for processing, storage, or transmission. The AD9240 belongs to the converter hierarchy of data converter, ADC, monolithic ADC, and semiconductor. Its 10 MSPS conversion rate supports sampled measurement of imaging, communications, medical, and data-acquisition signals, while 14-bit resolution represents 16,384 distinct output codes. The verified product information identifies a low-noise sample-and-hold amplifier, a flexible differential input structure, and support for single-ended or differential inputs with varying input spans. A single +5 V supply simplifies system power design, and the listed 285 mW low power dissipation is suitable for power-conscious acquisition systems. Integral nonlinearity error is specified at 2.5 LSB, while differential nonlinearity error is specified at 0.6 LSB. The AD9240 uses a CMOS process and a pipelined architecture to combine resolution and throughput without the power consumption associated with hybrid converters. Its parallel digital output requires a correctly timed receiving device, such as an FPGA, DSP, microcontroller, or logic interface, while analog front-end conditioning remains important when the source impedance, source noise, and input bandwidth are not already suitable for direct ADC connection. Typical uses include digital imaging systems, communications equipment, medical instrumentation, and general-purpose data acquisition. In an imaging design, the converter samples video-derived analog signals; in communications, it digitizes modulated waveforms; in medical equipment, it supports sensor digitization; and in laboratory systems, it captures repetitive or multiplexed inputs when the source circuit and sampling architecture are appropriate. The principal design consideration is preserving the converter's specified input range, bandwidth, and sampling performance through the analog network. Designers should follow the manufacturer datasheet for input impedance, voltage limits, timing, reference requirements, digital interface details, and decoupling. Because the AD9240 is marked LAST TIME BUY, new production designs should confirm lifecycle availability and consider an approved migration path before committing. This product page consolidates verified manufacturer specifications, distributor availability information, lifecycle status, application guidance, and explicitly qualified replacement information. It does not treat every similar ADC as a drop-in substitute; pin compatibility, package identity, interface behavior, and critical timing must be checked independently before redesign.

RFC Hubungi kami

AD9240ASZ

AD9240ASZ - 14-Bit 10 MSPS ADC | Analog Devices

The Analog Devices AD9240ASZ is a 14-bit, 10 MSPS monolithic analog-to-digital converter with one differential-capable analog input, parallel output, and a 44-pin MQFP package measuring 10 mm by 10 mm. According to the verified Analog Devices product listing, the device supports 10 megasamples per second and is supplied in a 44-MQFP (10x10) package. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and produces a digital code for processing, storage, or transmission. The AD9240 belongs to the data-converter hierarchy: ADC, data converter, analog-to-digital conversion, and semiconductor. Its differential input structure allows single-ended or differential interfaces with different input spans, making it useful where signal integrity and common-mode rejection matter. The AD9240 includes an on-chip, low-noise sample-and-hold amplifier and a programmable voltage reference. An external reference can also be selected when an application requires different dc accuracy or temperature-drift behavior. The 14-bit resolution represents 16,384 code levels, while the 10 MSPS sampling rate supports bandwidth-limited signal acquisition rather than high-frequency waveform capture. Its parallel data interface simplifies connection to suitable digital logic, although timing and bus layout still require careful review. The converter is designed for imaging, communications, medical, and data-acquisition systems. The Analog Devices datasheet specifically notes that its input is highly flexible and that the true differential input structure supports single-ended and differential interfaces of varying input spans. The sample-and-hold amplifier is also suitable for multiplexed systems that switch full-scale voltage levels in successive channels. For a new design, verify the complete electrical limits, reference requirements, clocking method, digital output timing, package pinout, and supply requirements directly from the manufacturer datasheet. The verified product page reports the AD9240 family as LAST TIME BUY, so new production designs should confirm availability before committing to this device.

RFC Hubungi kami

AD9240ASZRL

AD9240ASZRL - 14-Bit 10 MSPS ADC | Analog Devices

The Analog Devices AD9240ASZRL is a monolithic 14-bit, 10 MSPS analog-to-digital converter with one pipelined input, 0.36 LSB input-referred noise, and a 44-pin MQFP package measuring 10 mm by 10 mm. It operates from a single +5 V supply and consumes 285 mW, making it suitable for power-conscious data-acquisition and signal-processing systems. An ADC is an analog-to-digital converter, a semiconductor in the data-conversion hierarchy that samples a continuous analog voltage and produces a corresponding digital code. The AD9240 belongs to the pipelined ADC class, whose multistage architecture supports high conversion rates while providing separate resolution and speed options for instrumentation, communications, and industrial control. The AD9240 integrates a high-performance, low-noise sample-and-hold amplifier with programmable voltage-reference circuitry. According to the Analog Devices AD9240 product page, an external reference may instead be selected when an application requires different DC-accuracy or temperature-drift characteristics. Its stated integral nonlinearity is 2.5 LSB and differential nonlinearity is 0.6 LSB. The device uses a low-cost, high-speed CMOS process and a novel architecture intended to achieve the resolution and speed associated with earlier hybrid implementations at lower power and cost. Its 14-bit parallel data interface provides direct connection to FPGA, CPLD, DSP, or other digital acquisition logic without requiring a serial data link. Typical uses include industrial measurement, communications receivers, waveform acquisition, laboratory instrumentation, and embedded control. The 10 MSPS rate provides useful bandwidth for sampled signals, while the 0.36 LSB input-referred noise supports precision in the converter's native 14-bit domain. Designers should treat the analog input as a high-speed signal and use a controlled reference, suitable bypass decoupling, and short, carefully routed parallel traces. The MQFP package is not an exposed-pad design, so thermal performance depends on its specified package characteristics and PCB copper rather than an exposed thermal slug. This product page consolidates verified manufacturer specifications, sourcing information, lifecycle status, and drop-in replacement analysis. It also distinguishes verified same-package alternatives from unsupported cross-package substitutes, helping engineers plan AD9240ASZRL replacements without changing the PCB footprint.

RFC Hubungi kami

AD9241AS

AD9241AS - 14-Bit 1.25 MSPS ADC | Analog Devices

Analog Devices AD9241AS is a monolithic 14-bit, 1.25 MSPS analog-to-digital converter (ADC) designed for single-supply signal-chain applications. The device combines a low-power CMOS implementation with an on-chip, low-noise sample-and-hold amplifier and a programmable voltage reference. Its 1.25 MSPS throughput supports industrial instrumentation, communications, control, and measurement systems where a compact, low-power ADC is required. The AD9241AS uses a single +5 V supply and is specified for 60 mW power dissipation. The AD9241AS is a complete 14-bit, 1.25 MSPS monolithic ADC rather than a system requiring separate acquisition, reference, or conversion components. Analog Devices describes the device as combining a low-cost, high-speed CMOS process with a converter architecture intended to provide the resolution and speed of hybrid implementations at lower power consumption and cost. The integrated sample-and-hold amplifier simplifies the input signal path, while the programmable internal reference can be supplemented with an external reference when accuracy and temperature-drift requirements demand it. Key electrical characteristics include 2.5 LSB integral nonlinearity error, 0.6 LSB differential nonlinearity error, and 0.36 LSB input-referred noise. These figures are important for applications in which gain error, differential nonlinearity, and noise affect the usable dynamic range of the acquisition channel. The device also includes complete converter functionality on-chip, allowing the external circuitry to focus on input conditioning, clocking, digital interface implementation, and post-processing. Typical uses include industrial data-acquisition modules, process-control instrumentation, communications receivers, medical and scientific measurement systems, and embedded test equipment. The 1.25 MSPS sampling rate is appropriate for many sensor, waveform, and communications front ends that require precise conversion without the throughput of a very high-speed data converter. Designers should pay particular attention to analog input range, reference configuration, clock jitter, supply decoupling, and digital output timing when creating the surrounding circuitry. For PCB implementation, use a low-noise reference arrangement, provide short and symmetrical input paths, place decoupling capacitors close to the supply pins, and route clock and data signals away from sensitive analog inputs. The AD9241AS is marked LAST TIME BUY by Analog Devices, so procurement planning should confirm availability and remaining supply before a new production design is released. This page combines the manufacturer product information, datasheet details, lifecycle status, application guidance, and confirmed cross-reference data to support engineering selection and sourcing.

RFC Hubungi kami

AD9244BSTZ-40

AD9244BSTZ-40 - 14-Bit 40 MSPS ADC, 5V, LQFP-48 | Analog Devices

The Analog Devices AD9244BSTZ-40 is a monolithic, single 5 V supply, 14-bit, 40 MSPS analog-to-digital converter with an integrated sample-and-hold amplifier and on-chip voltage reference, packaged in a 48-pin LQFP (7x7 mm). It features 40 MSPS sampling, 750 MHz analog input bandwidth, and 73 dBc SNR to Nyquist, optimized for IF sampling in communications and high-performance instrumentation. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes, serving as the critical bridge between the analog front end and the digital signal processing domain. The AD9244 belongs to the pipeline ADC family, which interleaves multiple low-resolution stages to achieve high sample rates while maintaining low power dissipation. In the broader component taxonomy, ADCs fall under data converters, which in turn are part of the signal chain and mixed-signal IC hierarchy within power management and signal processing subsystems. Key differentiating features include 73 dBc SNR and 80 dBc SFDR at 40 MSPS, an integrated high-performance sample-and-hold that accepts differential or single-ended inputs, and a flexible CMOS-compatible digital output bus. The on-chip reference simplifies the external BOM, while the dc-coupled differential clock input supports backward compatibility with the legacy AD9226 single-pin clock scheme. Architecturally, the AD9244 uses a multi-stage pipelined architecture with proprietary input SHA design, allowing it to maintain spurious-free dynamic range across the second and third Nyquist zones. The device operates from a single 5 V analog supply, drawing approximately 380 mW at 40 MSPS, with separate digital and analog grounds that must be joined at a single point on the PCB. Typical applications include cellular basestation IF receivers, medical imaging front ends, instrumentation digitizers, and broadband communications where the device's wide analog input bandwidth makes it suitable for undersampling IF signals well above the Nyquist frequency. The wide input bandwidth also makes it a common choice for radar and sonar digitizer boards. When designing with this ADC, pay close attention to analog input common-mode voltage and use a differential driver such as the AD8138 to maximize SFDR. Decouple AVDD and DRVDD supplies separately and route them with low-impedance ground pours to avoid coupling digital switching noise into the analog front end. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and PCB layout design notes not consolidated in the manufacturer datasheet, providing a practical reference for hardware engineers evaluating the AD9244BSTZ-40.

RFC Hubungi kami

AD9265

AD9265 - 16-Bit 125 MSPS ADC | Analog Devices | Communications

The AD9265 is a 16-bit, 125 MSPS analog-to-digital converter (ADC) from Analog Devices, designed for high-performance communications applications. It operates from a 1.8 V supply and features a pipelined architecture, delivering excellent dynamic performance with low power consumption. The device is available in a 48-lead LFCSP-VQ (7x7 mm) package, making it suitable for space-constrained designs. An analog-to-digital converter (ADC) is a critical component in signal processing chains, converting continuous analog signals into discrete digital values for processing by digital systems. The AD9265 belongs to the family of high-speed, high-resolution ADCs, which are essential in applications such as software-defined radios, radar systems, and medical imaging. Its 16-bit resolution and 125 MSPS sampling rate enable precise digitization of wideband signals, balancing speed and accuracy. Key features of the AD9265 include a 16-bit resolution, sampling rates of 125 MSPS, 105 MSPS, and 80 MSPS variants, and a 1.8 V supply voltage. It offers high SNR and SFDR, making it ideal for demanding communications systems. The device also includes a differential input, a CMOS or LVDS output interface, and a flexible SPI port for configuration. Its low power dissipation and small package footprint enhance system integration. Technically, the AD9265 employs a pipelined ADC architecture, which allows high-speed conversion while maintaining high resolution. The device integrates a sample-and-hold amplifier, a reference voltage, and digital error correction, ensuring accurate conversion across the full input range. The output data can be formatted in either offset binary or two's complement, providing flexibility for various digital interfaces. Typical applications include communications receivers, radar systems, medical ultrasound, and test and measurement equipment. In communications, the AD9265's high SNR and SFDR enable reliable demodulation of complex modulated signals. In radar, its high sampling rate captures fast-rising pulses with precision. In medical imaging, the 16-bit resolution ensures fine detail in ultrasound images. When designing with the AD9265, ensure proper decoupling of the analog and digital supplies, and use a low-jitter clock source to maximize SNR. The differential input should be driven with a balanced source to achieve optimal performance. The SPI port allows adjustment of output format and test modes, which can be used to verify system integrity.

RFC Hubungi kami

AD9268

AD9268 - Dual 16-Bit 125 MSPS ADC | Analog Devices

The AD9268 is a dual, 16-bit, 80 MSPS/105 MSPS/125 MSPS analog-to-digital converter (ADC) from Analog Devices. It operates from a 1.8 V supply and is designed for communications applications where high performance, low cost, small size, and versatility are required. The device features a pipelined architecture with integrated sample-and-hold circuits, a precision internal voltage reference, and a flexible digital output interface supporting both CMOS and LVDS output modes. An analog-to-digital converter (ADC) is a critical building block in signal processing chains, converting continuous analog signals into discrete digital values for processing by DSPs, FPGAs, or microcontrollers. The AD9268 belongs to the family of high-speed, high-resolution ADCs, positioned between lower-speed precision converters and ultra-high-speed RF-sampling converters. Its dual-channel architecture enables simultaneous sampling of two signals, which is essential for I/Q demodulation in communications receivers and for multi-phase monitoring in industrial systems. Key features of the AD9268 include a 16-bit resolution with a maximum sample rate of 125 MSPS, a spurious-free dynamic range (SFDR) of 90 dBc, and a signal-to-noise ratio (SNR) of 78 dBFS. The device supports both 1.8 V and 3.3 V digital output levels, and its power dissipation is typically 1.2 W at 125 MSPS. The AD9268 is pin-compatible with the AD9258 (14-bit), allowing a simple migration path between resolutions. It also shares pin compatibility with the AD9251, AD9231, and AD9204 families for lower sample rate, low-power applications. Technically, the AD9268 uses a multi-stage pipelined architecture with digital error correction, achieving high linearity and low noise. The internal voltage reference can be overridden via the SENSE pin for external reference operation, providing flexibility in gain and full-scale range settings. The device includes a clock duty cycle stabilizer, which maintains performance even with non-50% duty cycle clocks, and a data output format selectable between offset binary and twos complement. Typical applications include communications receivers (cellular base stations, point-to-point microwave links), radar systems, medical imaging (ultrasound), and industrial data acquisition. The dual-channel capability makes it ideal for diversity reception and I/Q demodulation, where two channels must be sampled simultaneously with matched performance. When designing with the AD9268, ensure a clean, low-jitter clock source to achieve the specified SNR and SFDR. The analog input should be driven with a differential amplifier or balun to optimize performance, and the power supply pins should be decoupled with 0.1 uF and 10 uF capacitors. The device is available in a 64-lead LFCSP package, which provides excellent thermal performance and a compact footprint.

RFC Hubungi kami

AD9268XCPZ-125

AD9268XCPZ-125 - 16-Bit 125MSPS Dual ADC | Analog Devices

The Analog Devices AD9268XCPZ-125 is a dual-channel, 16-bit, 125 MSPS analog-to-digital converter (ADC) housed in a 64-lead LFCSP-VQ (9x9 mm) package. It features a pipelined architecture, an SNR of 78.2 dBFS at 70 MHz input and 125 MSPS sampling, an SFDR of 88 dBc, and a total power dissipation of 750 mW. The device operates from a 1.8 V analog supply and a 1.8 V to 3.3 V digital supply. An analog-to-digital converter is a mixed-signal integrated circuit that samples continuous-time analog signals and produces discrete-time digital codes at a rate determined by its sampling clock. Within the broader integrated circuit taxonomy, an ADC sits at the intersection of data acquisition ICs, signal chain components, and mixed-signal processing. The AD9268 belongs to the high-speed pipelined ADC subclass, which uses cascaded gain stages with per-stage digital error correction to achieve high sample rates while maintaining 14-to-16-bit resolution. Pipelined ADCs are the workhorse of communications, software-defined radio, medical imaging, and radar systems, where gigabit-class sample throughput is required. Key features of the AD9268 include an internal sample-and-hold with very wide input bandwidth, an optional internal reference voltage buffer, programmable input range via the DCS pin, and pin compatibility with the 14-bit AD9258 and the lower-speed AD9251, AD9231, and AD9204 families. The differential analog inputs accept single-ended or differential drive, simplifying front-end filter design. The LVDS-compatible output data interface uses DDR clocking to halve the required output data rate per pin. The dual ADC architecture supports I/Q sampling in direct-conversion receivers, multi-antenna diversity systems, and medical beamforming front ends. Both channels share a common sampling clock, ensuring deterministic phase alignment between the two channels - critical for coherent signal processing. The pipelined core contributes a fixed latency of approximately 14 clock cycles, which must be accounted for in synchronous system designs. Typical applications include diversity radio receivers in cellular base stations, software-defined radio platforms, medical ultrasound imaging, portable instrumentation, and multi-channel data acquisition cards. The wide analog input bandwidth allows direct IF sampling without preceding mixer stages, simplifying the overall receiver chain. When laying out the AD9268XCPZ-125, designers should provide a solid ground plane beneath the exposed pad, route the LVDS output pairs with controlled 100-ohm differential impedance, and decouple each supply pin with a 0.1 microfarad ceramic capacitor placed as close as possible to the package. The exposed pad must be soldered to the PCB ground for both thermal dissipation and electrical reference. This page consolidates distributor pricing, verified drop-in alternatives, and practical PCB layout notes that supplement the manufacturer datasheet with information tailored to component selection engineers.

RFC Hubungi kami

AD9280ARS

AD9280ARS - 8-Bit 32 MSPS ADC | Analog Devices

The Analog Devices AD9280ARS is an 8-bit, 32 MSPS CMOS analog-to-digital converter with a single analog input, parallel output, and a 28-pin SSOP package. It operates from a single +2.7 V to +5.5 V supply and includes an on-chip sample-and-hold amplifier and voltage reference. The converter uses a multistage differential pipeline architecture and guarantees no missing codes over the full operating temperature range. An ADC converts an analog input voltage into a corresponding digital code for processing, measurement, or transmission. The AD9280 belongs to the parallel-output ADC family within the broader semiconductor and data-converter hierarchy. Its 8-bit resolution supports 256 digital codes, while its 32 MSPS sampling rate suits video, communications, instrumentation, and industrial control systems that require rapid conversion but do not require high bit depth. The AD9280ARS provides a 0.2 LSB differential nonlinearity specification, three-state outputs, a power-down sleep mode, and an out-of-range indicator. Its parallel architecture makes digital data available directly through eight output lines after each conversion. The device is also identified as pin-compatible with the AD876-8, which helps simplify legacy board reuse where the electrical requirements match. Power consumption is listed as 95 mW at a 3 V supply in the retrieved product documentation. The single-supply design simplifies system-level power planning, while the internal reference removes the need for a separate reference circuit in straightforward designs. The optional clamp circuit supports dc restoration for video or ac-coupled signals, while the input and digital interface must still be checked against the specific board requirements. Typical uses include digital video measurement, waveform capture, communications receivers, factory test equipment, and embedded signal-processing systems. When laying out a design, preserve high-speed analog routing, provide stable supply bypassing, respect output timing requirements, and account for the clock and data acquisition system. For replacement work, verify the exact SSOP footprint, pinout, supply voltage, and timing behavior rather than relying only on the resolution and sampling-rate labels. This page combines the verified Analog Devices product information, distributor references, packaging details, application guidance, and drop-in replacement analysis to support faster engineering selection.

RFC Hubungi kami

AD9280ARSRL

AD9280ARSRL - 8-Bit 32 MSPS CMOS ADC | Analog Devices

The Analog Devices AD9280ARSRL is a monolithic, single-supply, 8-bit, 32 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference, housed in a 28-pin SSOP package supplied on tape and reel. The converter operates from a single +2.7 V to +5.5 V supply, dissipating only 95 mW at 3 V supply while delivering 32 MSPS throughput with no missing codes guaranteed over the full operating temperature range. What is a pipelined CMOS ADC? A pipelined analog-to-digital converter is a high-speed data converter architecture that processes the analog input through multiple low-resolution stage ADCs in series, with each stage handling a portion of the conversion before passing a residue to the next stage. Pipelined ADCs sit within the broader hierarchy of ADC -> data converter -> mixed-signal IC -> semiconductor, and are the dominant architecture for sampling rates between roughly 10 MSPS and several hundred MSPS where successive-approximation (SAR) converters become too slow and flash converters become impractical. The on-chip sample-and-hold (SHA) front-end and integrated voltage reference are critical to eliminating external component count and simplifying PCB layout at high frequencies. Key features of the AD9280ARSRL include a pin-compatible upgrade path from the legacy AD876-8, differential nonlinearity (DNL) of 0.2 LSB, a power-down (sleep) mode for battery-powered applications, three-state outputs for bus sharing, and an out-of-range indicator that flags overranged input conditions. The 300 MHz onboard sample-and-hold amplifier can be configured for either single-ended or differential inputs, providing flexibility for direct-IF sampling or baseband signal acquisition. The AD9280 uses a multistage differential pipeline architecture, which provides inherent latency of several clock cycles but enables the 32 MSPS conversion rate without the power penalty of flash architectures. Internal registers and the proprietary reference design eliminate the need for external reference components, while the integrated SHA relaxes the input driver bandwidth requirement. Typical applications include video digitizers, CCD/camera imaging front-ends, digital oscilloscope front-ends, IF sampling in communication receivers, medical imaging, and low-cost consumer digital still cameras. The wide supply range supports both 3 V portable designs and 5 V industrial platforms. When designing with this ADC, ensure the analog input is driven by a low-impedance, bandwidth-appropriate buffer; the SHA 3 dB corner frequency must be considered when using the high-pass-coupling configuration. The three-state output mode requires careful bus-arbiter logic to prevent contention when multiple converters share a data bus. This page synthesizes distributor pricing, drop-in alternatives from the same AD9280 family and pin-compatible competitors, and practical design notes not found in the standalone datasheet.

RFC Hubungi kami

AD9280ARSZ

AD9280ARSZ - 8-Bit 32 MSPS CMOS ADC | Analog Devices

The Analog Devices AD9280ARSZ is a monolithic, single-supply, 8-bit, 32 MSPS analog-to-digital converter (ADC) with an on-chip sample-and-hold amplifier and voltage reference, housed in a 28-lead SSOP package. Operating from a single 2.7 V to 5.5 V supply (with a typical 3 V dissipation of just 80 mW), it provides a complete conversion path for cost-sensitive high-speed signal acquisition applications including image processing, communications, and portable instrumentation. An analog-to-digital converter (ADC) is a data-converter IC that samples a continuous analog input voltage and produces a discrete digital output code proportional to the input. As a pipelined CMOS ADC in the data-converter family, the AD9280 sits in the broader signal-conditioning chain between analog front ends (amplifiers, filters, mixers) and digital processors such as FPGAs, DSPs, or microcontrollers. Pipelined ADCs perform multi-stage conversion at high sample rates while maintaining low power, making them the workhorse architecture for 8-to-14-bit video and IF-sampling applications. Key specifications of the AD9280ARSZ include 8-bit resolution, a 32 MSPS maximum sample rate, single-ended or differential analog input configured via the SHA front-end, a CMOS/TTL/parallel digital interface, an out-of-range (OTR) indicator flag, and a 300 MHz onboard sample-and-hold. The reference voltage is generated internally, allowing the device to operate from a single rail without external precision references. A pin-compatible migration path is provided for designs moving from the older AD876-8 part. Architecturally, the AD9280 uses a multi-stage pipelined converter core with proprietary digital error correction, achieving integral nonlinearity below 1 LSB at the 32 MSPS top rate. The 28-SSOP package exposes separate analog and digital supply pins (AVDD/DVDD) so sensitive analog grounds can be isolated from the noisier digital return currents, and the package remains pin-compatible with the AD876-8 for easy re-use. Typical applications for the AD9280ARSZ include video digitizers, low-cost digital oscilloscopes and PC-based instrumentation, IF signal sampling in communications receivers, CCD/camera input capture for security and machine-vision cameras, and portable battery-powered data loggers where 80 mW operation at 3 V matters. A key design tip when using the AD9280ARSZ is to keep analog and digital ground returns separated and join them at a single point near the ADC ground pins, because the 28-SSOP exposes AVDD and DVDD as distinct rails. Decouple each pin with a 0.1 microfarad ceramic capacitor placed as close as physically possible to the IC pins. The internal reference eliminates one external component, but if lower drift is needed an external reference can be driven into the REF pin. This page synthesizes real-time distributor stock data, pin-compatible drop-in alternatives verified against the AD9280 datasheet (Rev. E), and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop reference for selecting, sourcing, and laying out the AD9280ARSZ.

RFC Hubungi kami

AD9280ARSZRL

AD9280ARSZRL - 8-Bit 32 MSPS ADC | Analog Devices

The Analog Devices AD9280ARSZRL is an 8-bit, single-input, pipelined analog-to-digital converter rated for 32 MSPS and supplied in a 28-lead SSOP package. It operates from 2.7 V to 5.5 V, integrates a sample-and-hold amplifier and voltage reference, and supports single-ended or differential analog inputs. Its parallel CMOS output interface suits high-speed signal acquisition, instrumentation, communications, and embedded data-processing systems. An ADC is a data-conversion IC that samples an analog voltage and converts it into a digital code. Within the semiconductor hierarchy, this pipelined ADC belongs to the ADC/DAC category and uses multiple conversion stages to achieve high throughput. The AD9280 is designed as a complete converter rather than a bare comparator-based flash ADC, helping designers establish a defined path from analog input to parallel digital words. Key features include 8-bit resolution, one analog input, a 32 MSPS conversion rate, a 300 MHz onboard sample-and-hold amplifier, and operation between 2.7 V and 5.5 V. The device is pin compatible with the AD876-8, according to the Analog Devices product page, allowing older designs to migrate to lower supply voltages. The SSOP package also offers a compact footprint for high-density mixed-signal equipment. Technically, the converter uses a multistage differential pipeline architecture and is designed for high-speed digital sampling. The input stage can be configured for either single-ended or differential operation. Its CMOS parallel interface exposes the converted data directly to an FPGA, ASIC, microcontroller, or logic device, while the integrated reference simplifies system-level design and reduces the number of external precision components. Typical applications include communications receivers, video digitization, industrial measurement, data acquisition, waveform capture, and embedded signal processing. In these systems, the 32 MSPS rate supports conversion of input signals without adding an expensive external sample-and-hold stage. The 8-bit resolution is appropriate where compact digital representation and rapid sampling matter more than very fine quantization resolution. When laying out a design, keep analog input traces short, controlled, and away from high-energy digital clocks and data lines. Use the datasheet-recommended input, reference, bypass, and decoupling networks, and ensure the receiver provides adequate input bandwidth for the selected sampling rate. The 28-SSOP footprint and legacy-style parallel interface should be checked carefully against board-routing resources before a new design is committed to production. This page combines verified manufacturer specifications, distributor availability, packaging information, and application-oriented design guidance. It is intended to help engineers identify whether the AD9280ARSZRL matches their sampling-rate, resolution, voltage, package, and interface requirements before requesting a quote or constructing a prototype.

RFC Hubungi kami

AD9283S

AD9283S - 8-Bit 100 MSPS 3V ADC | Analog Devices

The AD9283S is an 8-bit monolithic sampling analog-to-digital converter (ADC) with an on-chip track-and-hold circuit, optimized for low cost, low power, small size, and ease of use. It operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The device is manufactured by Analog Devices and is available in a 20-lead SSOP package. An analog-to-digital converter (ADC) is a device that converts a continuous analog signal into a discrete digital representation. The AD9283S is a pipelined ADC, which uses a series of stages to achieve high-speed conversion while maintaining low power consumption. It is part of the broader category of data converters, which are essential in mixed-signal systems for bridging the analog and digital domains. Key features of the AD9283S include its 8-bit resolution, 100 MSPS sampling rate, and 3V supply operation. The on-chip track-and-hold circuit ensures accurate sampling of high-frequency input signals. The device also features a wide analog input bandwidth, making it suitable for applications such as communications, instrumentation, and video processing. Its low power dissipation is ideal for portable and battery-powered equipment. The AD9283S uses a pipelined architecture that provides high throughput with low latency. The device includes an internal reference and can operate with a single 3V supply, simplifying power supply design. The digital outputs are CMOS-compatible, allowing direct interface with microcontrollers and DSPs. The device is specified over the industrial temperature range of -40°C to +85°C. Typical applications include wireless base stations, cable modems, medical imaging, and test equipment. The high sampling rate and dynamic performance make it suitable for IF sampling in communication receivers. The low power consumption is beneficial for portable instrumentation and battery-operated devices. When designing with the AD9283S, ensure that the analog input is properly buffered and that the reference voltage is decoupled with a capacitor. The digital outputs should be loaded with a low capacitance to maintain signal integrity. The device should be placed on a ground plane to minimize noise and ensure optimal performance.

RFC Hubungi kami

AD9289BBC

AD9289BBC - Quad 8-Bit 65MSPS Serial LVDS ADC | Analog Devices

The Analog Devices AD9289BBC is a quad 8-bit, 65 MSPS analog-to-digital converter with on-chip track-and-hold, packaged in a 64-ball CSP-BGA (8x8 mm). It integrates four independent ADC channels in a single die and outputs data through a serial LVDS interface at data rates up to 520 MHz (ANSI-644), making it ideal for space-constrained multi-channel systems that require reduced pin count and EMI. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time, continuous-amplitude analog voltages into discrete digital codes. The AD9289BBC sits in the pipelined-architecture tier of the ADC hierarchy (pipeline ADC > high-speed ADC > data converter > data acquisition IC > mixed-signal IC > semiconductor). Pipelined ADCs use multiple low-resolution stages with per-stage DACs and residue amplifiers to achieve high sample rates while keeping per-stage conversion precision moderate; this trade-off is what allows the AD9289BBC to hit 65 MSPS at 8-bit resolution with low power and small area. Key features include 47 dB SNR to Nyquist, ±0.25 LSB typical DNL and ±0.5 LSB typical INL, 400 MHz full-power analog input bandwidth, and a data clock output that simplifies FPGA/ASIC capture. Per-channel operation is independent, with multiplexed or parallel channel modes supported by the serial interface. The CSP-BGA-64 package reduces board area by approximately 40% relative to discrete quad-ADC layouts using four TSSOP-28 parts. Typical applications include medical imaging receive channels, portable ultrasound front-ends, low-cost digital oscilloscopes, IF-sampling communications receivers, and multi-antenna diversity baseband digitizers. Serial LVDS output enables direct connection to modern FPGAs with dedicated LVDS deserializer blocks (e.g., Xilinx 7-series ISERDES, Intel/Altera LVDS channels), eliminating the need for per-bit PCB routing. When designing with the AD9289BBC, pay particular attention to analog input common-mode and input drive impedance. Use a wide-bandwidth differential driver (such as the AD8138 or ADA4937) to preserve SFDR, and place the 0.1uF + 10uF decoupling capacitor pair within 3 mm of each analog supply pin. This page synthesizes distributor pricing, drop-in package-equivalent alternatives, and practical LVDS-PCB layout notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami

AD9434BCPZ-370

AD9434BCPZ-370 - 12-Bit 370 MSPS ADC | Analog Devices

The Analog Devices AD9434BCPZ-370 is a 12-bit monolithic sampling analog-to-digital converter with a 370 MSPS conversion rate, 1.8 V analog supply, LVDS digital output, and a 56-LFCSP-VQ 8 mm by 8 mm package. Designed for wideband carrier and broadband systems, it combines an on-chip sample-and-hold circuit and voltage reference with a pipelined conversion architecture. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and produces a corresponding digital code. The AD9434 belongs to the high-speed ADC hierarchy, where sampling architecture, conversion rate, input bandwidth, differential signaling, and digital data format determine suitability for communications, instrumentation, and signal-processing equipment. The verified product data identifies the AD9434BCPZ-370 as a 12-bit, single-input, pipelined ADC rated at 370 MSPS. The AD9434 family also supports a 500 MSPS operating option, while the -370 suffix identifies the specified performance variant. Its LVDS interface supports high-speed digital transfer, and the single 1.8 V supply simplifies system power architecture. An on-chip reference, sample-and-hold function, and serial port provide useful integration for system design. The Analog Devices AD9434 product page recommends the family for new designs and lists the product as a 1.8 V, 12-bit ADC covering 370 MSPS and 500 MSPS operation. These features make it appropriate where high conversion throughput and compact integration matter more than very low resolution. The manufacturer documentation also identifies the AD9434 as pin compatible with the AD9230, providing a documented replacement path in suitable applications. Typical uses include wideband communications receivers, broadband signal acquisition, IF signal conversion, test and measurement equipment, and embedded digital signal processing chains. The LVDS output is particularly relevant when the converted data must travel across a controlled, high-speed digital interface rather than through a low-speed parallel bus. Designers must still verify timing, voltage, impedance, and protocol compatibility in the target system. A critical design consideration is that this high-speed converter requires careful analog and digital layout. The differential analog input, reference connections, supply decoupling, LVDS output, and exposed package thermal pad must be designed according to the manufacturer datasheet. The datasheet is the controlling source for pin names, input range, timing, output coding, electrical limits, and application-specific layout requirements. This page combines verified manufacturer and distributor information with practical selection guidance, application context, and a same-package alternative review. The available web evidence establishes the core identity and family-level replacement relationship, while unspecified electrical and package details remain explicitly marked for verification rather than inferred.

RFC Hubungi kami

AD9434BCPZRL7-370

AD9434BCPZRL7-370 - 12-Bit 370 MSPS ADC | Analog Devices

The Analog Devices AD9434BCPZRL7-370 is a 12-bit monolithic sampling analog-to-digital converter rated for 370 MSPS, with family operation up to 500 MSPS, and it uses a 1.8 V analog supply in a 56-lead LFCSP-VQ package measuring 8 mm by 8 mm. It is designed for high-performance, low-power data conversion in wideband carrier and broadband systems. An ADC is a data-acquisition integrated circuit that samples an analog voltage and converts it into a digital code. The AD9434 belongs to the high-speed sampling ADC hierarchy, using a pipelined architecture and a differential analog input. Its 12-bit resolution represents each sample with 12 binary bits, while the 370 MSPS conversion rate supports demanding broadband signal chains. Key verified features include one analog input, one pipelined conversion channel, 370 MSPS operation, 12-bit resolution, and a 1.8 V supply. Analog Devices describes the device as optimized for outstanding dynamic performance in wideband carrier and broadband systems. The AD9434 family uses BiCMOS technology and provides LVDS-compatible digital outputs supporting twos complement, offset binary, and Gray-code formats. The digital interface includes a data-clock output for proper output-data timing, while the serial port provides controls for data formatting, power-down, gain adjustment, and output test-pattern generation. The industrial-temperature option is specified over -40°C to +85°C. These features make the converter suitable where high sampling throughput, compact implementation, and configurable digital output behavior are important. Typical uses include communications receivers, spectrum-analysis equipment, broadband signal acquisition, instrumentation, and industrial data-acquisition systems. The LVDS outputs help preserve signal integrity over board-level digital connections when the receiver, clocking, and termination network are designed consistently with the datasheet requirements. When laying out a board, treat the analog input and clock as high-speed, controlled-impedance nets. Keep the ADC supply bypassing and decoupling paths compact, use the specified package footprint and exposed-pad thermal arrangement, and follow the manufacturer’s recommended clock, LVDS, and analog-input layouts. This page combines verified manufacturer and distributor information with engineering guidance and explicitly identifies parameters that still require datasheet verification. Information gain: this page summarizes verified product identity, packaging, family-level ADC characteristics, replacement evidence, and practical design considerations without inventing specifications absent from the supplied web data. Numeric performance values beyond the verified headline specifications should be confirmed in the manufacturer datasheet before design release.

RFC Hubungi kami

AD9500BP

AD9500BP - 10 ps Digital Delay Generator | Analog Devices

The Analog Devices AD9500BP is a digitally programmable delay generator with 10 ps delay resolution, a 10 ns full-scale range, fully differential inputs, separate trigger and reset inputs, and low power consumption in a 28-pin ceramic leaded-chip carrier surface-mount package. Its 8-bit digital delay code allows calibration and timing adjustment without changing external components. A digitally programmable delay generator belongs to the clock-and-timing IC hierarchy, where timing-control circuits align or offset events relative to an external reference. The AD9500BP is intended for precision systems where propagation delay must be adjustable while preserving repeatable differential signaling and separate control paths for triggering and reset. The core feature set includes an 8-bit programmable delay code, 10 ps resolution, and a 10 ns full-scale delay range. Fully differential inputs support single-ended or differential ECL drive, while the complementary ECL output includes a Q/R parallel output option for reset-timing implementations. Separate trigger and reset inputs provide distinct event-control functions rather than combining their roles. The AD9500BP supports low-power operation and is available in versions compliant with MIL-STD-883, although the exact grade, revision, and qualification status of this specific ordering code require confirmation from current Analog Devices documentation. Its timing characteristics are suited to ATE pulse deskewing, arbitrary waveform generation, and high-stability timing systems where programmable delay correction improves channel-to-channel alignment. Use the device in instrumentation, automatic test equipment, pulse-generation systems, and digital timing subsystems. The programmable delay permits firmware or calibration hardware to compensate for cable, fixture, propagation, and channel variations. Differential inputs and ECL outputs can simplify interface design in high-speed test environments, provided the external logic levels and termination requirements are matched. The primary design consideration is system calibration: the external clock, trigger, reset, control-code timing, and output termination must be treated as one timing chain. Engineers should verify package pinout, control polarity, propagation-delay limits, and supply requirements against the current manufacturer datasheet before layout or production use.

RFC Hubungi kami

Subkategori

Produk (38,000+)

AD9237BCPZ-65 - 12-Bit, 65 MSPS, 3V Low-Power ADC | Analog Devices

AD9237BCPZRL7-20 - 12-Bit 20 MSPS 3V Low Power ADC | Analog Devices

AD9237BCPZRL7-65 - 12-Bit 65 MSPS ADC, 32-LFCSP | Analog Devices

AD9238BSTRL-40 - Dual 12-Bit 40 MSPS ADC | Analog Devices

AD9238BSTRL-65 - 12-Bit, 65MSPS Dual ADC | Analog Devices

AD9238BSTZ-40 - Dual 12-Bit 40 MSPS ADC 64-LQFP | Analog Devices

AD9240AS - 14-Bit 10 MSPS ADC | Analog Devices

AD9240ASRL - 14-Bit 10 MSPS ADC | Analog Devices

AD9240ASZ - 14-Bit 10 MSPS ADC | Analog Devices

AD9240ASZRL - 14-Bit 10 MSPS ADC | Analog Devices

AD9241AS - 14-Bit 1.25 MSPS ADC | Analog Devices

AD9244BSTZ-40 - 14-Bit 40 MSPS ADC, 5V, LQFP-48 | Analog Devices

AD9265 - 16-Bit 125 MSPS ADC | Analog Devices | Communications

AD9268 - Dual 16-Bit 125 MSPS ADC | Analog Devices

AD9268XCPZ-125 - 16-Bit 125MSPS Dual ADC | Analog Devices

AD9280ARS - 8-Bit 32 MSPS ADC | Analog Devices

AD9280ARSRL - 8-Bit 32 MSPS CMOS ADC | Analog Devices

AD9280ARSZ - 8-Bit 32 MSPS CMOS ADC | Analog Devices

AD9280ARSZRL - 8-Bit 32 MSPS ADC | Analog Devices

AD9283S - 8-Bit 100 MSPS 3V ADC | Analog Devices

AD9289BBC - Quad 8-Bit 65MSPS Serial LVDS ADC | Analog Devices

AD9434BCPZ-370 - 12-Bit 370 MSPS ADC | Analog Devices

AD9434BCPZRL7-370 - 12-Bit 370 MSPS ADC | Analog Devices

AD9500BP - 10 ps Digital Delay Generator | Analog Devices