Produk (44,000+)

MCP3202-BI/SN - 12-Bit Dual-Channel 100 ksps ADC | Microchip
MCP3202-BI/SN

MCP3202-BI/SN - 12-Bit Dual-Channel 100 ksps ADC | Microchip

The Microchip Technology MCP3202-BI/SN is a 12-bit, dual-channel successive-approximation-register analog-to-digital converter capable of 100 ksps at 5 V and 50 ksps at 2.7 V, packaged in an 8-pin SOIC. It accepts analog inputs within a 2.7 V to 5.5 V operating range and communicates through an SPI-compatible serial interface. An ADC is a data-acquisition interface that converts continuous voltage signals into digital values for processing by a microcontroller or another digital controller. The MCP3202 belongs to the SAR ADC family, where an internal sample-and-hold circuit and successive comparison process produce a 12-bit result. This architecture is suited to embedded control, instrumentation, sensor measurement, and low-bandwidth analog monitoring systems. The converter's principal characteristics include two analog input channels, a resolution of 12 bits, and a maximum conversion rate of 100 ksps at a 5 V supply. At a 2.7 V supply, the documented conversion rate is 50 ksps. Low-power operation is reflected by typical standby and active currents of 500 nA and 375 µA, respectively, making the device useful in battery-operated embedded systems. SPI-compatible communication allows the MCP3202-BI/SN to connect to PICmicro and other SPI-capable microcontrollers while minimizing the number of signal lines required. The serial interface supports conversion-result transfer and channel selection through digital control signals. Because the device uses a SAR architecture rather than a continuous pipeline, it provides deterministic sampling behavior for general-purpose embedded measurement. Typical uses include potentiometer and resistive-sensor interfaces, industrial control inputs, low-voltage battery monitoring, digital panel meters, and compact data-acquisition modules. The device is also suitable for educational platforms using Arduino-compatible controllers or Raspberry Pi systems equipped with suitable SPI interface hardware. Designers should verify analog input voltage limits, reference-voltage behavior, source impedance, and acquisition timing against the operating voltage. A low source impedance, local analog grounding, and short PCB traces help preserve conversion accuracy. The SPI lines should also be arranged to minimize coupling from fast-switching digital signals into the analog input path. This product page combines manufacturer specifications, lifecycle information, drop-in family options, application guidance, and a parameter-by-parameter comparison. It helps engineers identify whether the MCP3202-BI/SN matches a required channel count, sampling rate, supply range, package, and low-power embedded-control design.

RFC Hubungi kami
MCP3202-CI/MS - 12-Bit Dual-Channel SPI ADC | Microchip
MCP3202-CI/MS

MCP3202-CI/MS - 12-Bit Dual-Channel SPI ADC | Microchip

Microchip Technology MCP3202-CI/MS is a 12-bit, dual-channel successive-approximation-register analog-to-digital converter with an SPI serial interface, operating from 2.7 V to 5.5 V in an 8-MSOP package. It converts two single-ended analog inputs at up to 100 ksps with a 5 V supply and 50 ksps with a 2.7 V supply. An ADC is an analog-to-digital converter, a data-acquisition IC that samples a continuous voltage and produces a numeric code for processing by a microcontroller or other digital controller. The MCP3202 belongs to the SAR ADC family and includes an internal sample-and-hold circuit. Its SPI interface allows a host processor to configure and read conversions while the converter remains compact and suitable for embedded control systems. The device provides 12-bit conversion resolution, two analog input channels, and an SPI-compatible serial interface in an 8-MSOP package. According to the Microchip manufacturer datasheet, operating current is typically 375 µA during active conversion and standby current is typically 500 nA. These characteristics make the converter suitable for portable instruments, industrial monitoring equipment, battery-powered controls, and low-power embedded data acquisition. The SAR architecture performs conversion by successively approximating the input voltage with internal capacitor-based comparisons. An on-board sample-and-hold circuit captures the input during the sampling interval, allowing the conversion process to operate from a held voltage. Serial communication uses SCLK, DIN, CS, and DOUT lines, with the exact operating sequence governed by the converter's control logic in the manufacturer datasheet. Typical applications include potentiometer and position measurement, temperature-sensor conditioning, current monitoring, industrial process control, and low-power embedded instrumentation. The two input channels can monitor two related analog quantities, while the SPI interface reduces the number of required signal lines and allows sharing with other serial peripherals when chip-select control is implemented correctly. For a new design, preserve the 8-MSOP footprint, verify the reference-voltage limits, and select input and reference capacitors according to the application’s noise requirements. Supply and reference grounds should be routed carefully to reduce conversion error, while the analog input pins should remain short, quiet, and physically separated from fast-switching nodes wherever the PCB layout permits. This page combines manufacturer specifications, practical embedded-conversion guidance, package and interface details, sourcing information, and validated substitute-analysis results for engineers designing around the MCP3202-CI/MS.

RFC Hubungi kami
MCP3202-CI/P - 12-Bit Dual-Channel 100 kSPS ADC | Microchip
MCP3202-CI/P

MCP3202-CI/P - 12-Bit Dual-Channel 100 kSPS ADC | Microchip

The Microchip Technology MCP3202-CI/P is a 12-bit, dual-channel successive-approximation analog-to-digital converter with a 100 kSPS conversion rate, SPI serial interface, and 8-pin PDIP package. The device supports analog inputs from 0 to 2.7 V or 0 to 5.5 V, depending on supply configuration, making it suitable for embedded measurement and control systems. A successive-approximation register ADC is an ADC architecture that determines the analog input by comparing it with a reference through successive approximation. An ADC belongs to the analog-to-digital conversion and data-acquisition hierarchy, while the MCP3202-CI/P is specifically designed for low-power embedded control applications. Its SPI interface allows a host microcontroller to configure input channels and retrieve digital results. The MCP3202-CI/P provides a 12-bit conversion resolution, two analog input channels, and a 100 kSPS sampling capability. The SAR architecture supports predictable conversion behavior for slowly changing sensor signals and general-purpose analog measurements. Its low-power operation and compact package help reduce system size and energy consumption in embedded designs. The SPI interface provides a straightforward connection to microcontroller peripherals, allowing command transfer and result readout over serial data lines. The dual-channel structure permits measurement of two analog signals without selecting two separate converter packages. Applications include temperature sensing, potentiometer reading, battery-voltage monitoring, industrial controls, and consumer embedded equipment. Designers should provide a stable reference voltage, adequate analog-input conditioning, and decoupling close to the device supply pins. Input signals must remain within the specified analog input range, and the selected SPI clock and conversion timing must comply with the manufacturer datasheet. The PDIP package also requires adequate through-hole spacing and appropriate lead clearance on the PCB. This page combines the verified Microchip product identity, distributor data, package information, lifecycle information, and practical engineering guidance. It is intended to help engineers evaluate MCP3202-CI/P for embedded analog measurement while separating verified specifications from parameters that require confirmation from the manufacturer datasheet.

RFC Hubungi kami
MCP3202-CI/SN - 12-Bit Dual-Channel SPI ADC | Microchip
MCP3202-CI/SN

MCP3202-CI/SN - 12-Bit Dual-Channel SPI ADC | Microchip

The Microchip Technology MCP3202-CI/SN is a 12-bit, dual-channel successive-approximation analog-to-digital converter in an 8-pin SOIC package. It converts two analog inputs through a serial SPI-compatible interface, operates from 2.7 V to 5.5 V, and supports conversion rates up to 100 ksps at 5 V and 50 ksps at 2.7 V. The device combines low power consumption with typical standby current of 500 nA and typical active current of 375 uA, making it suitable for embedded control systems, instrumentation, and low-power sensor interfaces. An ADC is a semiconductor that converts an analog voltage into a digital value for processing by a microcontroller or another digital system. The MCP3202 belongs to the SAR ADC hierarchy: successive approximation register architecture compares the input voltage with an internal reference through a sequence of conversion steps, producing a 12-bit result. Its dual input arrangement supports two measurement channels while sharing one SPI interface and a common voltage reference. Key operating features include a 12-bit resolution, two analog input channels, a 2.7 V to 5.5 V operating-voltage range, and an SPI-compatible serial interface. The MCP3202 supports both single-ended and differential input configurations according to the device data sheet. A 5 V supply permits the maximum 100 ksps conversion rate, while operation at 2.7 V provides a maximum rate of 50 ksps. The interface uses serial clock, data input, data output, and chip-select signals, reducing the number of parallel signal paths required on small embedded boards. Typical uses include battery-powered environmental sensors, industrial process monitoring, temperature measurement bridges, laboratory data acquisition, and educational microcontroller platforms such as Arduino and Raspberry Pi. In these systems, the ADC can be connected to a host controller through SPI while an external reference establishes the measurement scale. The low active current is useful for portable equipment, although the actual system consumption depends on the host controller, reference circuit, sensor, and digital interface activity. Designers should pay attention to analog grounding, reference stability, input range, sampling timing, and the relationship between supply voltage and maximum conversion rate. The analog input voltage must remain within the input range allowed by the selected reference configuration, and the reference pins should be decoupled according to the recommended application circuit. Keep SPI traces short, provide a clean return path for the digital signals, and place input and bypass capacitors close to the appropriate device pins. The 8-pin SOIC footprint is also convenient for mixed-signal designs where the ADC must share a board with a microcontroller and regulated supply rails.

RFC Hubungi kami
MCP3202-CI/ST - 12-Bit Dual-Channel SPI ADC | Microchip
MCP3202-CI/ST

MCP3202-CI/ST - 12-Bit Dual-Channel SPI ADC | Microchip

The Microchip Technology MCP3202-CI/ST is a 12-bit, dual-channel, successive-approximation analog-to-digital converter with an SPI serial interface, supplied in an 8-pin TSSOP package. It operates from a 2.7 V supply and combines two analog inputs with on-board sample-and-hold circuitry, making it suitable for embedded control, data acquisition, and sensor measurement systems. An ADC is an integrated circuit that converts continuously varying analog voltages into numeric values that a microcontroller or other digital controller can process. The MCP3202 belongs to the SAR ADC hierarchy, where an internal sample-and-hold circuit captures the input voltage and a successive-approximation conversion produces a 12-bit code. This architecture is appropriate for relatively low-frequency measurements where low power consumption and a compact package are more important than maximum conversion throughput. The MCP3202-CI/ST provides 12-bit conversion resolution, two analog input channels, a 2.7 V operating supply, and SPI communication. According to the manufacturer datasheet, its differential nonlinearity is specified to a maximum of 1 LSB and its integral nonlinearity to a maximum of 2 LSB. These characteristics establish the converter's nominal accuracy and help designers size the input range, analog front end, and software conversion scale. The SAR architecture uses on-board sample-and-hold circuitry to stabilize the selected analog input during conversion. A microcontroller can configure the conversion through the serial interface, initiate a sample, receive the 12-bit result, and repeat the process for either channel. SPI support makes the MCP3202 practical for systems where the ADC shares a compact serial bus with other peripherals and where fewer external pins are preferable to a parallel interface. Typical applications include industrial temperature and pressure sensing, potentiometer position measurement, battery voltage monitoring, laboratory data acquisition, and educational platforms connected to Arduino or Raspberry Pi boards. In each case, the analog signal should remain within the ADC input range, and the source impedance must be compatible with the sample-and-hold input arrangement. A key design consideration is signal conditioning. The selected channel should be driven through a suitable low-impedance buffer when the sensor has high source impedance, while analog traces should be kept away from switching nodes and high-current paths. Firmware must also configure the channel and input mode before interpreting the returned 12-bit result. This product page combines the manufacturer specifications, package and pin information, application guidance, and qualified same-footprint alternatives. It also highlights the electrical limits that determine whether the MCP3202-CI/ST is appropriate for a new embedded measurement design.

RFC Hubungi kami
MCP3204-BI/P - 12-Bit 4-Channel SPI ADC | Microchip
MCP3204-BI/P

MCP3204-BI/P - 12-Bit 4-Channel SPI ADC | Microchip

Microchip Technology MCP3204-BI/P is a 12-bit, 4-channel, 100 kSPS successive-approximation analog-to-digital converter with an SPI serial interface in a 14-pin PDIP package. It provides four single-ended analog inputs or two pseudo-differential input pairs, on-chip sample-and-hold circuitry, and supports SPI modes 0,0 and 1,1. Its specified differential nonlinearity is ±1 LSB maximum and integral nonlinearity is ±2 LSB maximum. An ADC is a data-conversion IC that converts an analog voltage into a digital number for processing, measurement, or control. The MCP3204 belongs to the SAR ADC family, which repeatedly compares the sampled input voltage with an internal reference and produces its 12-bit result through successive approximation. It sits within the broader semiconductor hierarchy of data converters, analog-to-digital converters, and embedded control ICs. The MCP3204 combines four selectable analog inputs with a 12-bit conversion result and a 100 kSPS maximum sampling rate. Its 2.7 V operating basis supports low-voltage embedded systems, while the SPI interface allows a microcontroller to command conversions and retrieve results using industry-standard serial signaling. Single-ended and pseudo-differential input configurations provide flexibility for sensor, potentiometer, and divided-voltage measurements. Its SAR architecture performs one conversion per sampled input without the complex filtering requirements associated with higher-speed converter families. On-chip sample-and-hold circuitry captures the analog input at the start of conversion. SPI operating modes 0,0 and 1,1 provide straightforward compatibility with common microcontroller serial peripherals, although software or hardware configuration must preserve the clock polarity and phase required by the selected mode. Typical uses include industrial control systems, four-channel sensor acquisition, potentiometer and resistive-divider measurement, battery or power monitoring, and embedded instrumentation. The four-channel configuration reduces the number of external multiplexers and analog front-end stages needed when several slowly changing or moderate-rate signals must be measured by a microcontroller-based system. Designers should connect the analog and digital grounds according to the manufacturer datasheet and use a stable reference voltage because ADC accuracy is referenced to VREF. Input signals must remain within the analog input range, and source impedance should be low enough to allow the sample-and-hold capacitor to settle within the acquisition time. SPI clocking, chip-select handling, and conversion-start timing should be implemented according to the manufacturer timing diagrams.

RFC Hubungi kami
MCP3204-BI/SL - 12-Bit 4-Channel 100 ksps ADC | Microchip
MCP3204-BI/SL

MCP3204-BI/SL - 12-Bit 4-Channel 100 ksps ADC | Microchip

The Microchip Technology MCP3204-BI/SL is a 12-bit, 4-channel successive-approximation analog-to-digital converter with a 100 ksps conversion rate, SPI serial interface, and 14-pin SOIC package. It supports four single-ended inputs or two pseudo-differential input pairs and operates from a 2.7 V supply. An ADC converts an analog voltage into a numeric value for processing by a microcontroller or other digital controller. The MCP3204 belongs to the successive-approximation ADC family, which repeatedly compares the sampled input voltage with an internally generated reference. Its SAR architecture combines straightforward digital control with low power consumption, making it suitable for embedded measurement systems that periodically sample sensors rather than continuously converting waveforms. The MCP3204-BI/SL provides 12-bit resolution, four configurable analog inputs, an on-chip sample-and-hold circuit, and an SPI interface operating in modes 0,0 and 1,1. Its specified accuracy includes a maximum differential nonlinearity of ±1 LSB and maximum integral nonlinearity of ±2 LSB. Four single-ended channels can be selected for general sensor measurement, while the pseudo-differential arrangement can improve noise rejection when a suitable common reference is available. Typical uses include industrial process monitoring, temperature and pressure sensor interfaces, battery-bank measurement, laboratory data acquisition, and compact embedded-control panels. The SPI interface allows a microcontroller to configure the converter and retrieve conversion results over a short serial bus. The 14-pin SOIC package is easy to assemble with conventional surface-mount production methods and remains suitable for compact, mixed-signal boards. Circuit design must provide a stable reference voltage, adequate input and reference decoupling, and an analog input source whose common-mode voltage remains within the device operating limits. Because the converter is successive-approximation based, each channel requires a conversion interval; software should not begin a new conversion until the previous result is complete. SPI clock polarity and phase must match the supported modes, and chip-select timing should preserve valid output data. This page consolidates the manufacturer specification, package information, application fit, and verified drop-in comparison guidance into a practical engineering reference. It helps designers evaluate the MCP3204-BI/SL alongside closely related Microchip converters while separating package compatibility from functional differences in channel count, temperature grade, and sampling requirements.

RFC Hubungi kami
MCP3204-CI/P - 12-Bit 4-Channel SPI ADC | Microchip
MCP3204-CI/P

MCP3204-CI/P - 12-Bit 4-Channel SPI ADC | Microchip

The Microchip Technology MCP3204-CI/P is a 12-bit, 4-channel successive-approximation-register analog-to-digital converter with a 100 kSPS sampling rate, a 2.7 V to 5.5 V supply range, and a 14-pin PDIP package. It combines four single-ended or two pseudo-differential inputs with an SPI serial interface and on-board sample-and-hold circuitry, making it suitable for embedded measurement and control systems. An ADC converts continuous analog voltages into digital codes for processing by a microcontroller or other digital controller. The MCP3204 belongs to the SAR ADC family, where a sampled input is converted through successive approximation rather than a continuously operating conversion process. Its four-channel input structure supports sensors, potentiometers, and control feedback while the SPI interface provides a compact connection to embedded processors. The verified manufacturer materials identify the MCP3204 as a 12-bit ADC with single-ended and pseudo-differential input configurations. The device family operates from 2.7 V to 5.5 V and provides typical standby and active currents of 500 nA and 320 µA, respectively. The MCP3204-CI/P is offered in a 14-pin PDIP package, while the same family is also available in 150 mil SOIC and TSSOP packages. Because it uses SAR architecture, the MCP3204 is appropriate for low-to-moderate-rate acquisition rather than high-speed waveform conversion. Its 100 kSPS capability permits periodic sensing of multiple analog channels, and the SPI interface allows the host controller to select an input, initiate conversion, and retrieve the result digitally. Exact timing, accuracy, and input-range details should be confirmed against the manufacturer datasheet for the selected production variant. Typical applications include industrial process monitoring, temperature and pressure sensor interfaces, battery or power-system measurement, and embedded control boards. In a sensor circuit, the analog output is applied to an input channel, the controller selects the channel through SPI, and the resulting 12-bit value is stored or processed in firmware. For layout and signal integrity, keep analog input traces short, provide a stable reference and supply arrangement, and avoid routing high-current switching paths adjacent to the analog inputs. Because the verified data does not provide complete package pin names, pricing tiers, or a confirmed lifecycle statement for this exact orderable part, those fields are explicitly marked where data is unavailable rather than inferred. This page combines the verified Microchip product identity, datasheet link, distributor references, and practical design guidance for engineers evaluating the MCP3204-CI/P in embedded analog measurement systems.

RFC Hubungi kami
MCP3204-CI/SL - 12-Bit 4-Channel SAR ADC | Microchip
MCP3204-CI/SL

MCP3204-CI/SL - 12-Bit 4-Channel SAR ADC | Microchip

The Microchip Technology MCP3204-CI/SL is a 12-bit, 4-channel successive approximation register analog-to-digital converter with a 100 kSPS conversion rate, SPI serial interface, and 14-pin SOIC package. It combines on-board sample-and-hold circuitry with low power consumption for embedded control systems that require compact multi-channel data acquisition. An ADC is an interface component that converts continuous analog voltages into digital values for processing by a microcontroller or other digital controller. The MCP3204 belongs to the SAR ADC family, where an internal sample-and-hold circuit captures an input voltage before a successive approximation conversion produces a 12-bit code. SPI provides a compact, widely supported interface for transferring conversion results to embedded processors. The converter features 12-bit resolution, four analog input channels, a maximum conversion rate of 100 kSPS, and an SPI interface. According to the Microchip MCP3204 product page, the device combines high performance and low power consumption in a small package. The 14-pin SOIC package supports conventional surface-mount assembly and is suitable for compact embedded-control boards. The MCP3204 supports both single-ended and differential measurements, providing flexibility for applications such as potentiometer sensing, temperature monitoring, bridge-sensor measurement, and general-purpose analog signal acquisition. Its four-channel architecture reduces the number of separate converter packages required when several independent or related analog signals must be measured. Typical uses include industrial control, instrumentation, data acquisition, embedded systems, and Arduino-compatible sensor interfaces. Because the MCP3204 uses SPI rather than I2C, it can operate alongside other SPI peripherals on a shared serial bus when chip-select handling and bus timing are designed correctly. PCB design should preserve short analog traces, provide a quiet ground reference, and place input-filter or protection components close to the corresponding pins. The analog input range must also be checked against the selected supply configuration, because input and reference voltages determine the usable conversion range and the effective full-scale code. This product record combines the manufacturer’s device description with practical guidance on signal conditioning, PCB layout, SPI implementation, and application selection. It also distinguishes pin-compatible family alternatives from parts that merely perform a similar ADC function but cannot replace this device without a footprint or interface redesign.

RFC Hubungi kami
MCP3204-CI/ST - 12-Bit 4-Channel SAR ADC | Microchip
MCP3204-CI/ST

MCP3204-CI/ST - 12-Bit 4-Channel SAR ADC | Microchip

Microchip MCP3204-CI/ST is a 12-bit, four-channel successive approximation register analog-to-digital converter with an SPI serial interface, a 100 ksps sampling rate, and a 14-pin TSSOP package. The automotive-qualified device is designed for embedded control applications requiring compact multichannel data acquisition and low-power operation. An analog-to-digital converter, or ADC, converts continuous analog voltage signals into digital values that a microcontroller or other digital controller can process. The MCP3204 belongs to the SAR ADC family, whose successive approximation architecture compares the input voltage with a internally generated reference through a successive sequence of conversion steps. Its SPI interface reduces the number of signal connections required for transferring conversion results. The MCP3204-CI/ST provides four analog input channels, 12-bit conversion resolution, and a 100 ksps conversion rate in a 14-pin TSSOP package. Its operating supply voltage begins at 2.7 V, making it appropriate for embedded systems that cannot support a 5 V-only analog interface. The automotive qualification indicated for this ordering code supports its use in vehicle-oriented electronic control systems when the complete system requirements are satisfied. The SPI interface supports integration with microcontrollers, programmable controllers, and data-acquisition systems. Four analog inputs allow one converter to serve multiple sensors or conditioned analog signals while avoiding the footprint and component count of four unrelated converter packages. The 12-bit result provides 4,096 discrete codes across the selected input range, while the 100 ksps rate supports rapidly changing measurements when the acquisition and signal-conditioning path are designed appropriately. Typical uses include automotive sensor acquisition, industrial control systems, battery and power monitoring, laboratory data acquisition, and embedded instrumentation. The converter can be paired with analog front-end circuits, voltage references, op-amp signal-conditioning stages, and SPI-capable microcontrollers. Its low-voltage operation and compact TSSOP outline are useful where board area, energy use, and deterministic serial communication are important. The principal design considerations are reference quality, input-range configuration, source impedance, acquisition timing, and SPI clocking. Input signals must remain within the selected analog range, and the sampling network should present sufficiently low impedance to the converter's sample-and-hold input. PCB traces should be kept short, reference connections stable, and digital return currents controlled to minimize conversion errors. This product page combines the manufacturer description with distributor and cross-reference information to summarize the MCP3204-CI/ST's resolution, channel count, sampling rate, interface, package, application fit, and replacement considerations. It also provides engineering-focused guidance for PCB layout, signal conditioning, and component selection.

RFC Hubungi kami
MCP3208-BI/P - 12-Bit 8-Channel SAR ADC | Microchip
MCP3208-BI/P

MCP3208-BI/P - 12-Bit 8-Channel SAR ADC | Microchip

The Microchip Technology MCP3208-BI/P is a 12-bit successive-approximation-register analog-to-digital converter with eight input channels, one SPI serial interface, and a 16-pin PDIP package. It operates from a 2.7 V supply and is designed for embedded-control systems that need multiple analog inputs measured by a microcontroller or other SPI host. An ADC is a data-conversion IC that transforms an analog voltage into a digital code. The MCP3208 belongs to the SAR ADC family within analog-to-digital converters, interface ICs, and the broader semiconductor hierarchy. Its internal sample-and-hold circuitry acquires the input voltage before successive approximation converts that voltage into a 12-bit result. The SPI interface allows sampled measurements to be transferred efficiently between the converter and a digital controller. Key features include 12-bit conversion resolution, eight single-ended input options, and SPI communication. The verified product information identifies four differential input channels, eight single-ended inputs, one SAR conversion engine, and a 2.7 V operating supply. These characteristics make the device useful when an embedded design must monitor multiple sensors, potentiometers, or analog control signals without using a separate ADC for every channel. The MCP3208-BI/P uses the BI temperature grade, which the verified distributor information associates with an operating range of -40°C to +85°C. Its 16-pin PDIP package favors through-hole construction, reworkability, and educational or industrial control boards where a socket or conventional plated through-hole footprint is useful. Because it is a multiplexed converter, the selected channel determines which analog input is connected to the internal sample-and-hold circuit during conversion. Typical applications include industrial process monitoring, environmental sensor acquisition, laboratory measurement interfaces, audio and control-signal digitization, and embedded instrumentation. In these systems, the microcontroller initiates a conversion by writing channel and configuration commands over SPI, waits for the sample-and-hold and conversion sequence, and then reads the 12-bit result. A multiplexed architecture reduces package size, although channel switching means conversions are sequential rather than simultaneous. When designing around the MCP3208-BI/P, verify the analog input range against the selected reference voltage and confirm that the SPI host uses the required clocking and chip-select behavior. Reference and analog-ground routing are critical because ADC accuracy depends on the quality of the voltage reference and the analog signal path. The 16-pin PDIP package also requires adequate through-hole spacing and mechanical clearance in compact production equipment. This product page combines the verified Microchip and distributor specifications with package, application, sourcing, and design context. It also distinguishes verified drop-in replacements from merely similar ADC functions, preventing a functional substitute with a different package from being presented as a PCB-compatible alternative.

RFC Hubungi kami
MCP3208-BI/SL - 12-Bit 8-Channel SPI ADC | Microchip
MCP3208-BI/SL

MCP3208-BI/SL - 12-Bit 8-Channel SPI ADC | Microchip

The Microchip Technology MCP3208-BI/SL is a 12-bit, 8-channel successive approximation register analog-to-digital converter with a 100 ksps maximum sampling rate, configured for 4 differential or 8 single-ended inputs and housed in a 16-pin SOIC package. It combines an SPI serial interface, programmable input configuration, and low-power operation for embedded control, industrial measurement, and sensor-acquisition systems. An ADC is a data-conversion IC that converts an analog voltage into a digital code for processing, logging, display, or closed-loop control. The MCP3208 belongs to the ADC → data-converter IC → semiconductor hierarchy. Its SAR architecture repeatedly compares the sampled input with an internal reference to produce a 12-bit result. This makes it suitable for adding general-purpose analog measurement to a microcontroller that does not include enough onboard ADC channels. The converter provides eight analog input channels that can be used as eight single-ended inputs or four pseudo-differential input pairs. Maximum differential nonlinearity is ±1 LSB and maximum integral nonlinearity is ±2 LSB for the MCP3208. The SPI interface supports modes 0,0 and 1,1, while the input structure includes an onboard sample-and-hold circuit. These features balance useful conversion resolution with a straightforward host-controller interface. MCP3208-BI/SL operates from a 2.7 V supply, and its analog reference and digital interface support embedded-system integration. The SPI interface transfers the 12-bit conversion result while minimizing pin count compared with a parallel ADC. The 16-SOIC package has a 3.90 mm body width and supports industrial temperature operation from -40°C to +85°C, making it appropriate for compact control boards requiring analog inputs beyond the capabilities of the host MCU. Typical uses include temperature-sensor monitoring, potentiometer position acquisition, current and voltage measurement, industrial panel controls, and multichannel data acquisition. Differential channels can improve rejection of common-mode voltage when paired with suitable sensor circuitry. The 100 ksps rate supports rapidly changing analog signals, although each conversion is initiated and read through the SPI interface. Design the analog and digital sections to minimize noise and ground currents. Place the decoupling and reference components near the converter, route SPI signals away from sensitive analog inputs, and account for reference accuracy when calculating overall measurement error. For battery-powered systems, verify the selected conversion rate and shutdown behavior against the available current budget.

RFC Hubungi kami
MCP3208-CI/P - 12-Bit 8-Channel SAR ADC | Microchip
MCP3208-CI/P

MCP3208-CI/P - 12-Bit 8-Channel SAR ADC | Microchip

The Microchip Technology MCP3208-CI/P is a 12-bit, eight-channel successive approximation analog-to-digital converter with a 100 ksps sampling rate, 2.7 V to 5.5 V supply range, and SPI interface in a 16-pin PDIP package. It converts four single-ended or eight pseudo-differential analog inputs through programmable input channels, while its sample-and-hold circuitry supports embedded measurement and control systems. An analog-to-digital converter is an ADC, a semiconductor that translates an analog voltage into a digital code. The MCP3208 belongs to the SAR ADC family, using a successive approximation register to acquire one conversion result through successive comparison steps. In the system hierarchy, it is an ADC, data-acquisition IC, embedded-control peripheral, and semiconductor. Key features include 12-bit resolution, eight analog input channels, four pseudo-differential input pairs, a 100 ksps maximum sampling rate, and SPI communication. The manufacturer datasheet describes single-ended or pseudo-differential input programmability, allowing the same device to serve applications with different channel arrangements. Its 2.7 V to 5.5 V operating range supports low-voltage embedded systems and conventional 5 V industrial interfaces. The SAR architecture is appropriate when deterministic sampling, modest resolution, and serial integration are more important than very high throughput. The SPI interface allows a microcontroller to command conversions and read results, while the 16-pin PDIP package supports through-hole prototyping, legacy industrial boards, and designs where a socket or hand-soldered installation is useful. Typical standby and active currents are approximately 500 nA and 320 uA, respectively. Typical applications include industrial process monitoring, environmental sensors, temperature and pressure measurement, laboratory instrumentation, embedded data acquisition, and low-voltage control systems. The SPI bus should be configured for the intended clock and chip-select behavior, and analog inputs must remain within the device's specified voltage limits. For new high-density designs, SOIC variants may be preferable, but the MCP3208-CI/P is specifically the PDIP package. The main design trade-off is throughput and resolution rather than ultra-high precision: 100 ksps and 12-bit resolution are adequate for many control and measurement tasks but may not satisfy demanding instrumentation. This page combines verified Microchip specifications, package information, sourcing references, and application-oriented design guidance.

RFC Hubungi kami
MCP3208-CI/SL - 12-Bit 8-Ch SAR ADC, SPI, SOIC-16 | Microchip
MCP3208-CI/SL

MCP3208-CI/SL - 12-Bit 8-Ch SAR ADC, SPI, SOIC-16 | Microchip

The Microchip Technology MCP3208-CI/SL is a 12-bit, 8-channel successive approximation register (SAR) analog-to-digital converter (ADC) with an SPI-compatible serial interface, housed in a 16-pin SOIC (SL) package. Operating from a single 2.7V to 5.5V supply, it delivers up to 100 ksps throughput and integrates 8 input channels that can be software-configured as either 8 single-ended inputs or 4 pseudo-differential pairs. An analog-to-digital converter is a mixed-signal integrated circuit that converts a continuous-time, continuous-amplitude voltage on its input pin into a discrete digital code at its output. SAR ADCs in particular use a binary-search algorithm with an internal sample-and-hold and capacitive DAC to converge on the input voltage in N conversion cycles (N = number of bits). SAR converters sit within the broader ADC family alongside delta-sigma (high-resolution, low-speed) and pipeline ADCs (very-high-speed, multi-Msps), and are favored for low-latency, moderate-resolution sampling in embedded systems where determinism and simple serial interfacing matter more than ultimate resolution. Key features include ±1 LSB maximum DNL, ±1 LSB maximum INL, low power consumption of 5 nA standby current and 0.5 mA typical active current at 5V, and an industrial-grade operating temperature range of -40 C to +85 C. The SPI interface uses a standard 4-wire arrangement (CS, DIN, DOUT, CLK), is compatible with 8-bit serial protocols, and supports daisy-chaining of multiple devices on the same bus. The device combines a track-and-hold input stage with a successive-approximation core and on-chip clock. The pseudo-differential input mode provides improved common-mode rejection for bridge sensors and thermocouple interfaces, while single-ended mode maximizes channel count for general-purpose monitoring of 8 separate analog signals. Typical applications include factory automation sensor multiplexing, battery monitoring in portable instruments, data acquisition front-ends for HVAC controllers, and robotics joint position sensing. The SOIC-16 wide-body package simplifies hand-prototyping and is widely accepted by contract assemblers. When designing with the MCP3208, ensure VDD is well-decoupled with a 1 uF ceramic capacitor placed within 5 mm of the AVDD pin, and that the analog input source impedance stays below 1 kohm to avoid converter gain errors. Note that -CI versions are specified over -40 C to +85 C, while -BI versions extend to -40 C to +125 C. This page synthesizes real-time distributor pricing, drop-in alternatives from the same Microchip SAR ADC family, and application notes not collated in the standalone datasheet, helping you evaluate whether MCP3208-CI/SL is the right ADC for your 8-channel embedded design.

RFC Hubungi kami
MCP3301-BI/MS - 13-Bit Differential SPI ADC | Microchip
MCP3301-BI/MS

MCP3301-BI/MS - 13-Bit Differential SPI ADC | Microchip

The Microchip Technology MCP3301-BI/MS is a 13-bit successive-approximation analog-to-digital converter with one fully differential input channel, a 100 ksps conversion rate, and an SPI-compatible serial interface. It operates from a single 5.5 V supply and is packaged in an 8-MSOP for compact analog measurement systems. The -BI/MS ordering identifies the industrial temperature grade and MSOP package format used in the MCP3301 family. An analog-to-digital converter is an integrated circuit that converts a continuous voltage at an analog input into a numeric code for processing, control, display, or data logging. The MCP3301 belongs to the SAR ADC hierarchy, where a sample-and-hold circuit and internal comparator successively resolve the input voltage. Its differential architecture measures the voltage between the AIN0+ and AIN0- pins, which helps reject common-mode noise when the sensor output is referenced to a shared ground. Key device characteristics include 13-bit resolution, a maximum conversion throughput of 100 ksps, full differential input capability, an SPI serial interface, and single-supply operation from a 5.5 V maximum supply. The datasheet also specifies differential nonlinearity and integral nonlinearity limits of plus or minus 1 LSB for the MCP3301 grade. Its compact 8-MSOP footprint suits battery-powered instruments and remote data-acquisition nodes where board area and standby power are important. The conversion core uses a sample-and-hold architecture, while the serial interface supports serial input and output functions on shared clock and data pins. The device accepts an external reference voltage, allowing measurement accuracy to be scaled to the analog signal chain. Because the MCP3301 has one differential channel rather than multiple single-ended inputs, channel multiplexing is not required, and differential source impedance should remain balanced for best performance. Typical applications include battery-powered environmental sensors, industrial pressure and temperature transmitters, remote process-monitoring nodes, laboratory measurement instruments, and low-power data loggers. The SPI interface makes the converter suitable for designs using a microcontroller with a dedicated or general-purpose serial controller. The main design consideration is the relationship between reference accuracy, source impedance, and digital noise coupling. Place the reference and analog input traces away from high-current switching paths, use a quiet reference source, and follow the manufacturer datasheet layout and bypass recommendations. Verify acquisition timing in firmware because each conversion requires a sample period followed by bit transfer over the serial interface. This page combines the Microchip product information and datasheet with package details, purchasing guidance, comparison parameters, and practical integration notes that help engineers evaluate the MCP3301-BI/MS for low-power precision measurement designs.

RFC Hubungi kami
MCP3301-BI/P - 13-Bit 100 kSPS SPI ADC | Microchip Technology
MCP3301-BI/P

MCP3301-BI/P - 13-Bit 100 kSPS SPI ADC | Microchip Technology

The Microchip Technology MCP3301-BI/P is a 13-bit, single-channel SAR analog-to-digital converter with one differential input, a 100 kSPS conversion rate, and an SPI serial interface in an 8-pin PDIP package. It operates from a 4.5 V to 5.5 V single supply and is specified over -40°C to +85°C. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and converts it into a numerical value for processing by a microcontroller or other digital controller. The MCP3301 belongs to the SAR ADC, ADC, data-converter IC, and power-management-adjacent signal-conversion hierarchy. Its fully differential input can reject common-mode noise when the source is arranged around a biased reference voltage. Key features include 13-bit resolution, a 100 kSPS maximum sampling rate, and ±1 LSB maximum differential nonlinearity. The B-grade MCP3301-BI/P has a maximum integral nonlinearity of ±2 LSB. Its SPI interface provides a straightforward connection to embedded processors, while single-supply operation simplifies system power planning for industrial, battery-powered, and remote data-acquisition equipment. The device uses a successive-approximation conversion architecture. Each conversion determines the unknown input through a sequence of internal comparisons, after which the result is transferred through the serial interface. The differential input architecture is useful when the measured signal is small relative to the ADC supply. Biasing both inputs near the midpoint of the input range improves use of the available code range, while keeping their differential voltage within the converter's permitted input range. Typical applications include battery-powered environmental sensors, industrial pressure or temperature acquisition, remote monitoring, laboratory measurement equipment, and embedded control systems. The 100 kSPS rate is suitable for continuously changing analog measurements that do not require high-rate waveform capture, and the differential input can simplify front-end design for bridge sensors and small-signal transducers. Designers should provide a stable reference voltage, bypass the supply close to the device, and maintain the analog input voltage within the operating range. The SPI clock, chip-select, and digital output timing must satisfy the manufacturer datasheet, and unused input and reference pins must be connected according to its recommended application circuit. This page consolidates verified manufacturer and distributor information, package-level alternatives, interface guidance, and application-specific selection context. It is intended to help engineers locate the datasheet, compare interchangeable variants, plan a PCB layout, and assess whether the MCP3301-BI/P fits a precision, low-power measurement design.

RFC Hubungi kami
MCP3301-CI/P - 13-Bit 100ksps Diff ADC with SPI | Microchip
MCP3301-CI/P

MCP3301-CI/P - 13-Bit 100ksps Diff ADC with SPI | Microchip

The Microchip Technology MCP3301-CI/P is a 13-bit differential-input, low-power successive-approximation-register (SAR) analog-to-digital converter (ADC) with an industry-standard SPI serial interface, housed in an 8-pin PDIP through-hole package. The converter achieves up to 100 ksps sampling rate over a 4.5V to 5.5V single supply, with differential inputs that allow the full-scale input range to be referenced to a user-supplied voltage between 400 mV and 5V, yielding an input-referred resolution range between approximately 98 uV (at 0.4V VREF) and 1.22 mV (at 5V VREF). An SAR ADC is a successive-approximation-register analog-to-digital converter, the dominant topology for medium-speed, medium-resolution precision conversion in microcontroller-based systems. SAR ADCs sit within the broader ADC taxonomy (Flash, SAR, Delta-Sigma, Dual-Slope) and are preferred where deterministic latency, low power consumption, and ease of microcontroller interface are required - exactly the trade-off space the MCP3301 targets. Key features include true differential inputs with low integral nonlinearity, an external VREF input that scales input range dynamically, an SPI-compatible serial output that simplifies connection to virtually any microcontroller, and very low power consumption - typically 50 nA standby and 300 uA active. The 8-pin PDIP through-hole format supports easy prototyping, breadboarding, and legacy industrial designs where surface-mount is undesirable. Architecturally, the MCP3301 combines a differential input sample-and-hold front-end, a precision SAR core clocked from an internal oscillator, and a discrete SPI output shift register. The combination produces one conversion per chip-select cycle, deterministic sampling instant, and intrinsic single-cycle latency - ideal for multiplexed sensor arrays and digital control loops. Typical applications include battery-powered remote sensor nodes, industrial process control loops, portable instrumentation, multi-channel thermocouple or load-cell digitizers (paired with external multiplexers), and embedded data-acquisition front-ends for HVAC and energy-metering systems. When designing with this part, remember to include a 0.1 uF decoupling capacitor close to the AVDD pin and to keep CS low during a full 13-clock conversion - releasing CS mid-frame will corrupt the output. The external VREF source must be low-noise to fully benefit from the 13-bit resolution. This page synthesizes distributor pricing, drop-in PDIP alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
MCP3301-CI/SN - 13-Bit Low-Power SPI ADC | Microchip Technology
MCP3301-CI/SN

MCP3301-CI/SN - 13-Bit Low-Power SPI ADC | Microchip Technology

The Microchip Technology MCP3301-CI/SN is a 13-bit, one-channel, differential-input successive-approximation analog-to-digital converter with an SPI serial interface, conversion rate up to 100 ksps, and an 8-pin SOIC package. Its low active current of 300 µA and standby current of 50 nA make it suitable for battery-powered instrumentation and remote data-acquisition systems. An analog-to-digital converter is an interface IC that converts a continuous analog voltage into a numeric value for processing, storage, or transmission. The MCP3301 belongs to the successive-approximation ADC hierarchy, which repeatedly compares the input against an internal DAC until its output matches the analog voltage. A differential ADC measures the voltage between two inputs, allowing common-mode voltage to be rejected when the source is balanced around a common return or reference. The converter supports a 4.5 V to 5.5 V supply range and can perform conversions at up to 100 ksps. Its reference voltage can be varied from 400 mV to 5 V. As a result, the input-referred resolution ranges from 98 µV with a 400 mV reference to 1.22 mV with a 5 V reference. The ±1 LSB maximum differential nonlinearity and ±2 LSB maximum integral nonlinearity identified for the -C version characterize the converter’s transfer accuracy. The SPI interface provides a familiar connection to microcontrollers, and the converter can remain in a low-current standby state between measurements. The single differential channel is appropriate for bridge sensors, current-shunt measurements, battery monitoring, temperature sensing, and other systems where preserving signal polarity and rejecting common-mode disturbance are important. The small 8-pin SOIC package also simplifies compact analog acquisition boards. Typical uses include low-power environmental sensors, industrial pressure and temperature acquisition, portable instrumentation, remote telemetry, and precision analog measurement. The 100 ksps rate supports faster measurement loops than a low-speed meter-oriented ADC while retaining the simplicity of a one-channel converter. Designers should select the reference and input ranges carefully because the usable differential voltage must remain within the reference-defined conversion range. Input and reference routing should be short and symmetric to minimize conversion error and noise pickup. When the source is not differential, a suitable signal-conditioning circuit may be required to translate its output into the converter’s differential input range. This product page combines the manufacturer’s operating limits, conversion characteristics, pin assignment, application guidance, package details, and same-footprint family options to support faster component selection and PCB planning.

RFC Hubungi kami
MCP3301T-CI/MS - 13-Bit SPI ADC | Microchip Technology
MCP3301T-CI/MS

MCP3301T-CI/MS - 13-Bit SPI ADC | Microchip Technology

The Microchip Technology MCP3301T-CI/MS is a 13-bit, single-channel successive-approximation analog-to-digital converter with a fully differential input, operating from a 2.7 V to 5.5 V supply and communicating through an SPI-compatible serial interface. It is packaged in an 8-pin MSOP with a nominal operating temperature range of -40 °C to +85 °C. The MCP3301 family combines low power consumption with a compact package for battery-powered systems and remote data-acquisition equipment. An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code for processing, measurement, storage, or control. The MCP3301 belongs to the SAR ADC hierarchy, where a successive-approximation conversion produces one output bit during each comparison cycle. Its differential input accepts a voltage difference between two analog nodes rather than measuring a single input relative to ground. This architecture is useful when the signal source is balanced, when noise common to both input nodes should be rejected, or when a current-sense or bridge circuit must be measured around a midpoint. Key features include 13-bit resolution, one differential analog-input channel, SPI-compatible communication, low-power operation, and an 8-MSOP package. The converter supports both single-ended and differential measurements, allowing the same device to serve compact sensing systems, temperature probes, pressure transducers, potentiometers, and other analog front ends. Its small package and low power consumption are especially valuable in remote sensors and portable instruments where board area and energy budget are tightly constrained. The MCP3301 uses a sample-and-hold architecture and an internal reference arrangement selected through the serial interface. During conversion, the SAR logic compares the sampled input against an internally generated DAC value. The resulting code is shifted out through the serial data output, while chip select and clock signals coordinate the transaction with the host controller. The SPI interface simplifies connection to microcontrollers while allowing the ADC to share a controlled bus with other compatible peripherals. Typical applications include battery-powered environmental monitors, industrial remote sensing nodes, laboratory measurement instruments, process-control equipment, and low-energy data loggers. The differential input can be connected to bridge sensors or differential signal sources, while a grounded input arrangement can be used where a single-ended source is more convenient. Designers should preserve a quiet analog ground and place input and reference components close to the device to minimize pickup and conversion error. For a new design, first confirm the analog input range, reference arrangement, conversion timing, and SPI mode against the manufacturer datasheet. Pay particular attention to source impedance and acquisition time: the sampling network must charge the internal sample-and-hold capacitor sufficiently before conversion. This page also organizes package information, practical design guidance, sourcing questions, and qualified drop-in alternatives for faster component evaluation.

RFC Hubungi kami
MCP3302-BI/P - 13-Bit SPI ADC, 100 ksps, 14-PDIP | Microchip Technology
MCP3302-BI/P

MCP3302-BI/P - 13-Bit SPI ADC, 100 ksps, 14-PDIP | Microchip Technology

The Microchip Technology MCP3302-BI/P is a 13-bit successive-approximation (SAR) analog-to-digital converter with four single-ended / two fully differential inputs, a 100 ksps conversion rate and an industry-standard SPI serial interface, packaged in a 14-pin PDIP (PDIP-14) tube. It offers 12-bit plus sign resolution, differential input capability and low power consumption for battery-powered systems and remote data acquisition. An SAR ADC is a category of data-conversion IC that converts an analog voltage into a digital code by comparing the input against a capacitor DAC and successively refining a binary approximation through a comparator. In the broader hierarchy, an ADC is a data converter, which is a data acquisition building block, which sits inside a mixed-signal signal-chain IC alongside op amps, references and interfaces. SAR converters trade resolution-per-conversion speed for very low power and low cost, making them the default choice for slow sensor signals rather than high-bandwidth waveform capture. Key features of the MCP3302-BI/P include true differential analog inputs, an SPI interface with chip select, serial data input and clock pins that can run from a simple microcontroller, low standby current for portable instruments, and a 14-pin PDIP package that is easy to prototype and hand-solder. The -BI/P ordering code designates the 13-bit, industrial-temperature PDIP variant supplied in tubes. Technically, the device uses a sample-and-hold front end ahead of the SAR conversion core, so the input is frozen during each conversion cycle. Multiple inputs are multiplexed, meaning only one analog node is connected to the internal DAC and comparator at a time. The differential architecture means the converter measures V(+) minus V(-), which rejects common-mode noise if the two wires are routed as a differential pair. Typical applications include battery-powered environmental monitoring, precision temperature and pressure sensor acquisition with thermocouple or ratiometric bridges, industrial 4-20 mA loop receivers, and low-rate energy metering. Companion silicon commonly includes SPI-capable microcontrollers such as ATMEGA328P-MNR, RS-485 transceivers such as SP490CN-L/TR for remote field buses, and digital I/O expanders such as PCA9554DBR. A key design consideration is the reference voltage: accuracy of the converted code is bounded by the stability and noise of the VREF pin, so a clean, decoupled reference and adequate input filtering are mandatory for accurate results. The MCP3302-BI/P is a 14-pin PDIP, so newer designs may prefer the SOIC-14 variant. This page combines verified distributor listings, a drop-in replacement review, and practical design notes that go beyond the manufacturer datasheet summary, including interface timing notes, filtering guidance and part-to-part trade-offs.

RFC Hubungi kami
MCP3302-BI/SL - 13-Bit 2-Channel SAR ADC | Microchip
MCP3302-BI/SL

MCP3302-BI/SL - 13-Bit 2-Channel SAR ADC | Microchip

Microchip Technology MCP3302-BI/SL is a 13-bit analog-to-digital converter with two differential input channels, four single-ended inputs, one SAR conversion engine, and an SPI serial interface in a 14-pin SOIC package. It is designed for compact, low-power measurement systems where differential sensing improves signal integrity and common-mode rejection. An ADC converts an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3302 belongs to the successive-approximation-register, or SAR, ADC family. Its SAR architecture compares the input against an internal DAC through successive conversion steps, providing predictable sampling behavior suitable for instrumentation and embedded data-acquisition systems. The MCP3302-BI/SL provides 13-bit resolution, two differential or four single-ended input choices, and one SAR converter. Its SPI interface supports connection to microcontrollers and other digital controllers. Full differential inputs are especially useful when the measured source sits around a nonzero reference voltage or when ground offsets and coupled noise could affect single-ended measurements. The device is aimed at battery-powered systems and remote data-acquisition equipment, according to the manufacturer product page. Its low-power operating approach helps limit energy use in portable instruments, while the 14-pin SOIC package supports conventional surface-mount assembly. The BI ordering code and SL package code identify the exact commercial variant represented by MCP3302-BI/SL. Typical uses include battery monitors, current and voltage measurements, temperature sensing, industrial process measurement, portable instrumentation, and remote sensor acquisition. Differential pairing is useful for ratiometric sensor measurements, bridge outputs, and amplified sensor signals where rejecting common-mode disturbance is important. The SPI interface also allows the ADC to be shared with other compatible peripherals on a controller bus. Design the reference, analog input, and digital interfaces carefully. Keep analog and return paths short, provide stable reference bypassing, and use an appropriate common-mode range and source impedance for the selected channel configuration. Confirm conversion timing, input capacitance, and operating limits against the manufacturer datasheet before establishing system timing or scaling sensor output. This product page combines the manufacturer product description with verified distributor identification, packaging information, application guidance, and drop-in alternatives. It is intended to help engineers evaluate ADC architecture, pin compatibility, interface requirements, and design constraints before embedding the MCP3302-BI/SL in a PCB design.

RFC Hubungi kami
MCP3302-BI/ST - 13-Bit Dual-Channel SPI ADC | Microchip
MCP3302-BI/ST

MCP3302-BI/ST - 13-Bit Dual-Channel SPI ADC | Microchip

The Microchip Technology MCP3302-BI/ST is a 13-bit, dual-channel successive-approximation analog-to-digital converter with two differential or four single-ended inputs, a 100 kSPS sampling rate, and an SPI serial interface. It is packaged in a 14-pin TSSOP for compact, surface-mount data-acquisition and embedded-control designs. An ADC is a data-acquisition IC that converts an analog voltage into a digital code for processing by a microcontroller or other digital controller. The MCP3302 belongs to the ADC > data-converter > data-acquisition IC hierarchy and supports precision measurement in battery-powered systems, industrial equipment, remote sensors, and test instruments. Its differential inputs are particularly useful when the source is a bridge sensor or another circuit centered around a biased reference voltage. The MCP3302-BI/ST provides 13-bit conversion resolution, two differential or four single-ended input channels, and a maximum sampling rate of 100 kSPS. The SPI interface supports communication with a host processor, while the operating-temperature range of -40°C to +85°C suits industrial equipment. The 14-TSSOP package also allows reuse of a compact mixed-signal PCB layout where analog conversion must coexist with digital control circuitry. The device uses a successive-approximation conversion architecture, meaning the internal converter determines each result through a sequence of increasingly accurate bit decisions. Its low-power design is appropriate for portable and remote data-acquisition systems. Differential sampling can improve common-mode rejection when the measured signal is small and appears in the presence of process noise, although front-end conditioning remains necessary to keep the input voltage within the converter’s valid range. Typical uses include measuring pressure, temperature, strain, potentiometer positions, and other slowly changing analog signals. It can also serve industrial control modules, battery-powered environmental monitors, laboratory measurement equipment, and remote telemetry systems. For multiplexed sensors, separate analog switches may be required because the target configuration provides two differential or four single-ended channels. Design the reference-voltage and analog-input network carefully. Keep SPI traces short, provide a clean supply path, decouple the supply and reference pins near the IC, and route analog inputs away from switching nodes. Confirm input range, acquisition timing, and digital logic levels against the manufacturer datasheet before finalizing the schematic and PCB layout. This product page combines the manufacturer’s device description with practical selection criteria, compatible alternatives, interface considerations, and design guidance to support faster engineering evaluation and more accurate PCB planning.

RFC Hubungi kami
MCP3302-CI/P - 13-Bit Differential ADC | Microchip Technology
MCP3302-CI/P

MCP3302-CI/P - 13-Bit Differential ADC | Microchip Technology

The Microchip Technology MCP3302-CI/P is a 13-bit successive-approximation analog-to-digital converter with 2 differential channels, 4 input connections, and an SPI serial interface, housed in a 14-pin PDIP package. It combines full differential input support with low power consumption, making it suitable for battery-powered systems, remote data acquisition, and other applications that require compact, serial-output conversion. An ADC converts an analog voltage into a digital value for processing, measurement, or storage. The MCP3302 belongs to the ADC hierarchy, where a successive-approximation register compares the unknown input against internally generated reference voltages until the converted code is available. Its differential architecture supports measurement of voltage differences between input pairs, which can improve common-mode rejection when the source is carefully interfaced and the analog front end is designed accordingly. Key features include a 13-bit conversion resolution, two differential ADC channels, four input connections, full differential inputs, and an SPI-compatible serial interface. The SPI interface is suitable for connecting the converter to a microcontroller or other digital controller while transferring conversion results over a compact serial link. The low-power operating characteristics are particularly relevant for remote and battery-powered installations where reducing energy use can extend operating time. Technically, the MCP3302 uses a successive-approximation conversion architecture and offers a two-channel differential ADC. Microchip positions the device for low-power, small-package implementations where the complete measurement chain must communicate with a host processor. Because the MCP3302-CI/P is supplied in a 14-pin PDIP package, it is more appropriate for through-hole assembly and legacy-style PCB layouts than for space-constrained surface-mount designs. Typical applications include battery-powered environmental monitors, remote sensor acquisition nodes, industrial process measurement, laboratory instrumentation, and embedded control systems. The differential inputs can support bridge or ratiometric sensing when paired with suitable input conditioning, while SPI permits straightforward connection to a host microcontroller. Designers should verify the reference voltage, analog input range, sampling rate, digital interface timing, and acquisition method against the manufacturer datasheet before finalizing signal-chain and firmware requirements. Reference routing, source impedance, grounding, and differential pairing are as important as the converter itself when achieving repeatable measurements.

RFC Hubungi kami
MCP3302-CI/SL - 13-Bit Dual-Channel ADC | Microchip
MCP3302-CI/SL

MCP3302-CI/SL - 13-Bit Dual-Channel ADC | Microchip

The Microchip Technology MCP3302-CI/SL is a 13-bit successive-approximation analog-to-digital converter with two differential or four single-ended inputs, a maximum conversion rate of 100 ksps, and an SPI serial interface in a 14-pin SOIC package. It is designed for low-power battery-powered systems, remote data acquisition, and precision analog measurement. An ADC is a data-acquisition IC that converts an analog voltage into a digital value for processing, measurement, logging, or control. The MCP3302 belongs to the successive-approximation ADC hierarchy, where an internal sample-and-hold circuit and successive comparison process each input. It is a low-power analog-to-digital converter within the broader ADC and data-conversion IC category. Key features include 13-bit resolution, 100 ksps conversion throughput, two differential or four single-ended input configurations, and a single-supply operating point of 5.5 V. Differential inputs support rejection of common-mode voltage and measurement of small signals placed between two input nodes, while the single-ended configuration can use four channels referenced to ground. The -C grade provides maximum differential nonlinearity and integral nonlinearity values of ±1 LSB and ±2 LSB, respectively. These characteristics describe how closely the converter's transfer function follows an ideal straight line. The MCP3302T-CI/SL variant uses the same converter in a tape-and-reel ordering configuration, while MCP3302-CI/SL is supplied in the non-tape-and-reel configuration. Typical uses include battery-powered environmental monitoring, remote sensor acquisition, industrial process measurement, laboratory instrumentation, and low-speed precision control. Differential measurements are especially useful for bridge sensors and current-sense systems where a signal is expressed between two analog nodes rather than relative to ground. When designing around this ADC, place input and reference-decoupling capacitors close to their pins, keep analog and digital return currents separate, and use a stable reference source when measurement accuracy matters. The SPI interface simplifies connection to microcontrollers, but software must correctly handle conversion timing and the device's input-code format. This product page combines the manufacturer information with practical acquisition guidance, drop-in family comparisons, pin-package constraints, and design notes for engineers evaluating the MCP3302-CI/SL in low-power precision ADC applications.

RFC Hubungi kami