Mikropengawal

Produk (20,000+)

ATSAM3SD8BA-MU - Cortex-M3 MCU 64MHz 512KB Flash | Microchip
ATSAM3SD8BA-MU

ATSAM3SD8BA-MU - Cortex-M3 MCU 64MHz 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 512KB (512K x 8) of embedded Flash memory, housed in a 64-pin QFN (9x9 mm) exposed-pad package. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor based on the ARMv7-M architecture, combining a 3-stage pipeline core with a Nested Vectored Interrupt Controller (NVIC) and efficient Thumb-2 instruction set. Within the power hierarchy of embedded systems, an MCU like the SAM3S series integrates CPU, memory, peripherals, and clocking onto a single chip, serving as the main system controller in embedded product designs. Key features include the 64 MHz Cortex-M3 core delivering approximately 1.25 DMIPS/MHz, 512KB on-chip Flash with a dedicated page-erase controller, the SAM3S peripheral set including USB, USART, SPI, TWI, and ADC peripherals, and operation from 1.8V, 2.5V, or 3.3V supply rails per distributor data. The industrial temperature grade (IT) suits deployments beyond office environments, and the green/RoHS 64-QFN package with exposed pad supports thermal and ground-plane design. The ATSAM3SD8 belongs to the SAM3S Flash family (AT91SAM architecture), positioning it as Microchip/Atmel's cost-optimized general-purpose Cortex-M3 line. The fixed-ROM variant (SAM3SD8) targets secure code storage, while the in-system-programmable Flash supports field firmware updates over USB or UART. Typical applications include industrial control panels, consumer appliances, battery-powered data loggers, and USB-connected embedded devices where a 64 MHz 32-bit core with 512KB program memory covers code growth without a redesign. When designing with this device, budget Flash usage against the 512KB limit and confirm the 1.62V-3.6V supply window against your rail tolerances; the exposed pad must be soldered to a ground pour for signal integrity and thermal performance. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, adding cross-reference value beyond standard product listings.

RFC Hubungi kami
ATSAM3SD8BA-MUR - 512KB Flash Cortex-M3 MCU 64MHz | Microchip
ATSAM3SD8BA-MUR

ATSAM3SD8BA-MUR - 512KB Flash Cortex-M3 MCU 64MHz | Microchip

The Microchip Technology ATSAM3SD8BA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller from the SAM3S series, running at up to 64 MHz with 512KB (512K x 8) of embedded flash memory, supplied in a 64-pin VQFN (9x9 mm) package with exposed pad for industrial temperature applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, executing embedded control and connectivity tasks. Within the product hierarchy, the ATSAM3SD8BA-MUR belongs to the ARM Cortex-M3 core family of microcontrollers, which sits under 32-bit MCUs, under the broader microcontroller semiconductor category. The SAM3S series is Atmel/Microchip's general-purpose flash MCU line optimized for cost-sensitive industrial and consumer designs that need a balance of performance, memory, and peripheral integration. Key features of the ATSAM3SD8BA-MUR include the 64 MHz Cortex-M3 RISC processor with nested vectored interrupt controller, 512KB of on-chip flash for program storage, a rich peripheral set typical of the SAM3S family (USART, SPI, TWI/I2C, PWM, ADC, and USB device connectivity per the SAM3SD8 family definition), industrial temperature grade operation, and green/RoHS packaging marked MRL A per distributor listings. The SAM3SD8 variant integrates a dedicated USB device port, making it distinct within the SAM3S family for applications requiring USB connectivity without an external USB controller. The Cortex-M3 architecture provides deterministic interrupt latency and Thumb-2 instruction efficiency, enabling compact code in the 512KB flash while delivering real-time responsiveness for control loops. Typical applications include industrial control and automation nodes, consumer appliances with USB interfaces, PC peripherals and accessories, battery-powered instrumentation, and building automation sensors where 64 MHz performance and 512KB code capacity are appropriate. Design consideration: the exposed-pad QFN package requires a well-defined thermal via array and solid ground connection on the PCB land pattern; verify supply voltage options (1.8V/2.5V/3.3V per family documentation) against your power tree before layout. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design guidance not consolidated in the manufacturer datasheet, providing engineers and buyers a single citable reference for the ATSAM3SD8BA-MUR.

RFC Hubungi kami
ATSAM3SD8CA-AU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-AU

ATSAM3SD8CA-AU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology (Atmel) ATSAM3SD8CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB (512K x 8) embedded Flash, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor IC. The SAM3S family belongs to the ARM Cortex-M class of 32-bit MCUs, which are widely used in industrial control, consumer devices, and IoT nodes where deterministic, low-power real-time performance is required. Key features include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust software partitioning, and a high-speed USB device port with an integrated transceiver, enabling fast data up/downloading and plug-and-play USB connectivity without an external PHY. Operating voltage spans 1.62V to 3.6V (1.8V/2.5V/3.3V supply systems supported). Architecturally, the ATSAM3SD8CA-AU combines the Cortex-M3 three-stage pipeline with a rich peripheral set typical of the SAM3S series, including USARTs, SPI, TWI, ADC channels, PWM outputs, and a DMA controller. It is pin-to-pin compatible with AT91SAM7S legacy products, providing a direct migration path from Atmel ARM7 designs with higher performance and lower power consumption. Typical applications include industrial control panels, USB data loggers, point-of-sale terminals, battery-powered metering equipment, and consumer appliances that require USB connectivity with 32-bit processing headroom. The 512KB flash accommodates complex firmware stacks such as USB device class drivers and RTOS-based designs. A key design consideration is power management: the SAM3S offers multiple sleep and wait modes, so firmware should exploit these modes plus the dynamic clock controller to minimize average current draw in battery applications. This page synthesizes verified distributor pricing, drop-in alternatives from the same SAM3S family, and practical design notes not found in the manufacturer datasheet, adding selection and cross-reference value beyond standard catalog listings.

RFC Hubungi kami
ATSAM3SD8CA-AUR - 64MHz Cortex-M3 512KB MCU | Microchip
ATSAM3SD8CA-AUR

ATSAM3SD8CA-AUR - 64MHz Cortex-M3 512KB MCU | Microchip

The Microchip Technology ATSAM3SD8CA-AUR is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 64 MHz with 512KB (512K x 8) of flash memory and 64KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog converters. Within the product hierarchy, this device belongs to the SAM3S series -> ARM Cortex-M3 MCUs -> 32-bit microcontrollers -> embedded processors, a family widely used in industrial and consumer embedded systems. Key features of the ATSAM3SD8CA-AUR include dual-bank flash architecture with two 256KB banks that enables safe in-application self-programming and firmware updates without external memory, a rich peripheral set typical of the SAM3S family, and industrial-grade temperature operation. The AUR ordering code denotes a tape-and-reel packaged, green/RoHS-compliant industrial temperature device. Architecturally, the device implements the ARMv7-M Cortex-M3 RISC core with a nested vectored interrupt controller (NVIC) providing deterministic low-latency interrupt handling, plus a Thumb-2 instruction set that delivers high code density. The 1.62V to 3.3V single-supply operation (1.8V/3.3V rails per the verified FindIC specification) simplifies power tree design in battery-powered and line-powered systems alike. Flash acceleration logic allows the 64 MHz core to execute from flash with minimal wait states. Typical applications include industrial control and automation nodes, consumer appliances with user interfaces, building control panels, and data-logging equipment where 512KB of self-programmable flash and low power consumption extend battery life. When designing with this MCU, budget the flash wait states at full 64 MHz operation and verify the power-supply decoupling on all VDDIO/VDDCORE pins per the manufacturer datasheet layout guidance; dual-bank firmware update schemes must reserve adequate flash headroom in the active bank. This page synthesizes distributor pricing, drop-in alternatives, parametric comparison, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-19.

RFC Hubungi kami
ATSAM3SD8CA-CU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-CU

ATSAM3SD8CA-CU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8CA-CU is a 32-bit ARM Cortex-M3 microcontroller in the SAM3S series, running at up to 64 MHz with 512 KB embedded Flash and 64 KB SRAM, housed in a 100-ball TFBGA (9x9 mm, 0.8 mm pitch) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the heart of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The ARM Cortex-M3 is a 32-bit RISC processor core designed for cost-sensitive, deterministic real-time embedded applications, and the SAM3S family wraps this core with a rich peripheral set and low-power modes. Key features of the ATSAM3SD8CA-CU include the 64 MHz Cortex-M3 core with Thumb-2 instruction set, 512 KB (512K x 8) Flash program memory supporting in-system programming, 64 KB SRAM, and a supply voltage range of 1.62 V to 3.6 V. The device integrates USB, USART, SPI, and TWI communication peripherals along with a 12-bit ADC, timers, PWM channels, and multiple low-power sleep and wait modes for energy-sensitive designs. Technically, the SAM3S series uses a multi-layer AHB bus matrix that allows the CPU, DMA controller (Peripheral DMA), and USB to access memory and peripherals concurrently, reducing latency. The Flash Access Zone concept and prefetch buffer sustain zero-wait-state execution at moderate clock frequencies, while the nested vectored interrupt controller (NVIC) provides deterministic interrupt handling. Typical applications include industrial control and automation nodes, consumer and portable devices with USB connectivity, metering and sensing systems, and motor control or HVAC interfaces where the DMA-driven peripherals offload the CPU. When designing with this part, budget GPIO carefully: the 100-ball TFBGA requires fine-pitch (0.8 mm) PCB layout with via-in-pad or dog-bone fanout, and the 1.62-3.6 V supply demands a clean, decoupled 3.3 V rail for stable Flash operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3SD8CA-CUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-CUR

ATSAM3SD8CA-CUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8CA-CUR is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512 KB of embedded FLASH program memory and 64 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and a rich set of peripherals on one die. Within the semiconductor hierarchy, the ATSAM3SD8CA-CUR belongs to the SAM3S family of flash-based MCUs under the ARM Cortex-M embedded processor class, positioned for general-purpose embedded control where a full operating system is not required. Its flash-based program storage allows field firmware updates, while on-chip SRAM holds run-time data and stacks. Key features include 79 general-purpose I/O lines, a wide 1.62V to 3.6V operating supply range, and industrial-grade operation from -40C to +85C. Connectivity peripherals cover EBI/EMI external bus, I2C (TWI), IrDA, a memory card interface, SPI, SSC (synchronous serial controller), UART/USART, and full-speed USB, enabling flexible system expansion. The device also integrates 10-bit and 12-bit ADC converters plus a 12-bit DAC, an internal oscillator, and is pin-to-pin compatible with AT91SAM7S legacy products (64-pin versions) and SAM3S4/2/1 family members. Technically, the ARM Cortex-M3 core provides a 3-stage pipeline, Thumb-2 instruction set, and a nested vectored interrupt controller for deterministic interrupt latency. The embedded flash controller supports wait-state tuning for reliable 64 MHz execution, and the multiple serial controllers offload communication tasks from the CPU. Typical applications include industrial automation nodes, consumer electronics, and medical devices, where the combination of USB connectivity, precision analog, and small 9x9 mm BGA footprint fits space-constrained designs. When designing with this device, verify that the 1.62V-3.6V supply rail and the 100-TFBGA ball layout match your PCB fabrication capabilities, since fine-pitch BGA assembly requires appropriate process control. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U1CA-AU - 96MHz Cortex-M3, 64KB Flash MCU | Microchip
ATSAM3U1CA-AU

ATSAM3U1CA-AU - 96MHz Cortex-M3, 64KB Flash MCU | Microchip

The Microchip Technology (Atmel) ATSAM3U1CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at 96 MHz with 64 KB of embedded flash, 20 KB of SRAM, and a high-speed USB device port with an integrated transceiver, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripheral controllers on one die. Within the embedded-systems hierarchy, the SAM3U family sits in the ARM Cortex-M class of 32-bit microcontrollers, which are widely used where deterministic real-time behavior, low power, and rich serial connectivity are required, sitting above 8-bit MCUs and below application processors. Key differentiating features include the ARM Cortex-M3 revision 2.0 core executing the Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust task isolation, and embedded flash organized 128-bit wide to sustain zero-wait-state execution at full core speed. The integrated high-speed USB transceiver is the headline feature, enabling fast up/downloading of data with robust EMI tolerance and plug-and-play high-speed serial connectivity without an external PHY. Architecturally, the SAM3U is built around a multi-layer bus matrix with multiple SRAM banks, supported by a Peripheral DMA Controller (PDC) and DMA channels. This parallel data-path design sustains high-speed USB throughput while the CPU services other peripherals, minimizing bus contention during bulk data transfers. Operation spans a 1.62V to 3.6V supply range. Typical applications include USB data-logging instruments, industrial gateways and field tools, and consumer devices requiring fast USB mass-storage or firmware update paths, where the 96 MHz core and 64 KB flash cover the code and throughput budget of mid-complexity embedded designs. When designing with this part, budget flash carefully: 64 KB is generous for bare-metal firmware but tight for USB stacks with file systems, so consider the pin-compatible 128 KB (ATSAM3U2CA-AU) or 256 KB (ATSAM3U4CA-AU) siblings for growth headroom. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-19.

RFC Hubungi kami
ATSAM3U1CA-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip
ATSAM3U1CA-CU

ATSAM3U1CA-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip

The Microchip Technology ATSAM3U1CA-CU (Atmel SAM3U series) is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 96 MHz, with 64 KB of embedded flash memory, 20 KB of SRAM, and an integrated high-speed USB device transceiver, housed in a 100-ball TFBGA (9 x 9 mm) package. A microcontroller (MCU) is a complete computing system on a single chip, integrating a processor core, program memory, data memory, and peripherals. The ATSAM3U1CA-CU belongs to the ARM Cortex-M3 family of 32-bit embedded processors, positioned within the broader hierarchy of microprocessors and system-on-chip (SoC) devices for power-management and embedded control applications. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, high-speed USB connectivity with an integrated transceiver for fast data up/downloading, robust EMI tolerance, and plug-and-play high-speed serial communication. The 128-bit-wide flash access improves instruction fetch efficiency, and the device operates from a 1.62 V to 3.6 V single supply. The SAM3U architecture emphasizes USB data throughput: the embedded high-speed USB device port (480 Mbps capable transceiver) offloads data transfers from the CPU, while DMA channels move data between peripherals and memory without core intervention. This makes the device well suited to bridge USB host systems with data-acquisition, storage, and communication peripherals. Typical applications include USB data loggers and high-speed data acquisition systems, industrial communication gateways, embedded control panels, and consumer devices requiring fast USB file transfer with robust EMI performance. Designers should note the 64 KB flash and 20 KB SRAM capacity limits when sizing applications; the pin-compatible ATSAM3U2CA-CU and ATSAM3U4CA-CU in the same 100-TFBGA package offer 128 KB and 256 KB flash respectively, providing an upgrade path without PCB changes. This page synthesizes distributor inventory, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U1CB-AU - 96MHz Cortex-M3 MCU | Microchip Technology
ATSAM3U1CB-AU

ATSAM3U1CB-AU - 96MHz Cortex-M3 MCU | Microchip Technology

The Microchip Technology ATSAM3U1CB-AU is a 32-bit ARM Cortex-M3 microcontroller operating at up to 96 MHz, with 64 KB of embedded Flash memory and a 100-pin LQFP package measuring 14 mm by 14 mm. It combines the high-performance Cortex-M3 processor with a Memory Protection Unit, Thumb-2 instruction support, and a peripheral set that includes high-speed USB, multimedia card interface, and external bus connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAM3U1CB-AU belongs to the SAM3U family of flash microcontrollers, placing it within the hierarchy of ARM Cortex-M3 microcontroller, 32-bit embedded processor, embedded control IC, and semiconductor. This combination makes the device suitable for systems that require more processing capacity and connectivity than a basic 8-bit controller without moving to a higher-performance Cortex-M4 or Cortex-M7 design. Key features include operation at 96 MHz, 64 KB of Flash organized as 64K by 8 bits, a Memory Protection Unit, and the Thumb-2 instruction set. The 100-LQFP package exposes the device's high-performance USB device port, high-speed MCI interface for SDIO, SD, and MMC storage, and external bus interface. These interfaces support data acquisition, removable storage, USB-connected control, and embedded industrial equipment. The Cortex-M3 revision 2.0 core uses a RISC architecture and provides a deterministic embedded processing platform for supervisory control, protocol handling, and real-time peripheral management. The family architecture includes a memory accelerator and dual-bank Flash organization in higher-density members of the series. For the ATSAM3U1CB-AU specifically, the 64 KB Flash capacity requires disciplined firmware sizing while retaining the flexibility of a 32-bit instruction set and a broad peripheral platform. Typical applications include USB peripheral control, SD or MMC data logging, industrial data-acquisition equipment, networked control panels, medical or laboratory instruments, and compact embedded gateways. The USB device controller is especially useful for a host-connected analyzer or configuration interface, while the MCI interface can connect removable or embedded storage for firmware updates and captured data. Designers should assign pins according to the 100-pin LQFP pin-description table, preserve the required power, ground, decoupling, and clock connections, and route high-speed USB and memory signals with controlled return paths. The device is intended for surface-mount assembly, so land-pattern, solder-profile, and reflow details should be checked against the manufacturer datasheet before releasing the PCB design. This page combines the confirmed 96 MHz Cortex-M3 architecture, 64 KB Flash configuration, 100-LQFP mechanical format, and family peripheral capabilities with practical replacement, comparison, and design guidance. It is intended to help engineers identify the correct ATSAM3U1CB-AU variant, evaluate genuine same-package alternatives, and plan a reliable embedded layout before procurement.

RFC Hubungi kami
ATSAM3U1CB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip
ATSAM3U1CB-CU

ATSAM3U1CB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip

The Microchip Technology ATSAM3U1CB-CU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 96 MHz, with 64 KB of embedded flash memory, 20 KB of SRAM, and a 100-ball TFBGA (9x9 mm) package. It runs from a 1.62 V to 3.6 V supply over an industrial -40 C to +85 C temperature range and provides up to 57 I/O lines. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, nonvolatile flash memory for program storage, SRAM for data, and a rich set of peripherals on one die. Within the power-management hierarchy of embedded systems, an MCU sits at the application layer, coordinating sensors, communication interfaces, and actuators, and the SAM3U family belongs to the wider ARM Cortex-M class of 32-bit MCUs used across industrial and consumer electronics. Key features include the Cortex-M3 revision 2.0 core with Thumb-2 instruction set and a Memory Protection Unit (MPU), a 128-bit-wide flash access interface with memory accelerator for deterministic execution at 96 MHz, and integrated 10-bit and 12-bit ADCs for precision analog acquisition. The SAM3U family uniquely integrates a high-speed USB device port, making it attractive for data-acquisition endpoints. Architecturally, the flash memory uses a dual-bank structure with a memory accelerator that prefetches instructions to sustain zero-wait-state performance from the fast 128-bit bus, while the MPU supports safety-oriented software partitioning typical of Cortex-M3 designs. Typical applications include USB data-logger and bridge devices, industrial sensing nodes exploiting the 12-bit ADC, and portable instruments where the compact 9x9 mm TFBGA conserves board area. When designing with this part, budget the 64 KB flash carefully; if firmware grows, pin-compatible SAM3U family members with larger flash are available. Decouple each VDD ball with 100 nF ceramics placed close to the package. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control
ATSAM3U1EA-AU

ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control

The Microchip ATSAM3U1EA-AU is a 32-bit ARM Cortex-M3 microcontroller operating up to 96 MHz, with 64 KB of embedded Flash and 20 KB of SRAM, in a 144-LQFP 20 x 20 mm package. It belongs to the SAM3U family of embedded Flash microcontrollers and targets industrial automation, consumer electronics, and connected embedded products. What is a 32-bit ARM Cortex-M3 microcontroller? It is an embedded processor family based on the ARM Cortex-M3 RISC core, combining deterministic control processing, Flash program memory, SRAM, and peripherals on one integrated device. In the system hierarchy, it is an MCU, an embedded-control semiconductor, and a member of the wider semiconductor and industrial-control component categories. Its 96 MHz maximum operating speed provides headroom for protocol handling, control loops, and moderate real-time workloads. The verified device data identifies a 64 KB 64K x 8 Flash configuration, 20 KB SRAM, single-core operation, and a 144-LQFP package. The SAM3U family is documented with a Cortex-M3 revision 2.0 core, Memory Protection Unit support, and the Thumb-2 instruction set. These features make the device useful where a compact, single-chip control solution is preferred over a separate processor, memory, and peripheral arrangement. The ATSAM3U1EA-AU can serve as the central controller in industrial automation, communication-enabled embedded equipment, consumer devices, and medical-device control modules. Its 1.62 V to 3.6 V operating-supply range, reported in the verified Microchip USA listing, is suitable for low-voltage embedded systems. The 144-pin LQFP package also exposes a broad set of I/O and peripheral connections for external sensors, actuators, memory, and communication interfaces. Designers should verify the exact peripheral allocation, pin multiplexing, electrical limits, clock configuration, and programming requirements against the official Atmel datasheet before layout release. The LQFP footprint and 96-pin package body require careful fanout planning, adequate power decoupling, and thermal review. Firmware support should also be selected for the SAM3U device and the chosen development toolchain. This product summary combines verified distributor and manufacturer-linked information with practical sourcing and design context. It is intended to help engineers identify the correct MCU, locate the datasheet, assess package fit, and move to a controlled hardware and firmware validation process.

RFC Hubungi kami
ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU
ATSAM3U1EA-CU

ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU

The Microchip Technology ATSAM3U1EA-CU is a 32-bit ARM Cortex-M3 microcontroller operating at up to 96 MHz, with 64 KB of embedded Flash and 20 KB of SRAM, housed in a 144-BGA (13x13) surface-mount package. It belongs to the SAM3U family and is designed for embedded applications requiring USB, memory-card, serial, analog, timing, and communications peripherals. The device also supports a 1.62 V to 3.6 V supply range and an industrial temperature range of -40°C to +85°C. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAM3U1EA-CU follows the hierarchy ARM Cortex-M3 core → 32-bit RISC microcontroller → embedded microcontroller → semiconductor. Its compact BGA package supports dense PCB layouts, while the 96 MHz operating speed provides a practical balance between processing performance, power consumption, and design complexity for control-oriented embedded systems. Key features include a 96 MHz ARM Cortex-M3 processor, 64 KB Flash, 20 KB SRAM, DMA, PWM, watchdog timer, I2S, and high-speed USB device support with an embedded transceiver. The verified component description also identifies high-speed MCI support for SDIO, SD, and MMC interfaces, along with two 10-bit and two 12-bit ADC groups. These peripherals reduce the need for external interface devices and make the MCU suitable for connected industrial, communications, and data-acquisition equipment. The SAM3U architecture combines a 32-bit RISC processor with dedicated hardware peripherals for data movement and real-time control. DMA improves peripheral throughput by transferring data with less CPU intervention, while PWM and watchdog functions support deterministic timing and system monitoring. The 144-BGA package exposes the high peripheral count in a compact 13 mm by 13 mm footprint, but BGA layout requires careful escape routing, thermal-via planning, and assembly inspection. Typical applications include USB-connected control systems, industrial data loggers, SD-card or MMC data storage, motor and power-control platforms, audio interfaces using I2S, and embedded communications equipment. The 64 KB Flash capacity is appropriate for firmware that integrates control logic, USB firmware, and peripheral drivers without requiring an external memory device. Design consideration: the 144-BGA package and 1.62 V to 3.6 V supply range require careful decoupling, controlled-layout routing, and validation of signal integrity at the 96 MHz operating speed. Confirm pin assignments and BGA escape-routing requirements against the manufacturer datasheet before releasing a PCB design. This page consolidates the verified distributor specifications, practical application guidance, and replacement considerations for ATSAM3U1EA-CU, while clearly separating unavailable data from confirmed manufacturer information.

RFC Hubungi kami
ATSAM3U1EB-AU - 96MHz 64KB Cortex-M3 MCU | Microchip
ATSAM3U1EB-AU

ATSAM3U1EB-AU - 96MHz 64KB Cortex-M3 MCU | Microchip

Microchip Technology ATSAM3U1EB-AU is a 32-bit ARM Cortex-M3 microcontroller operating up to 96 MHz, with 64 KB of embedded Flash memory and a 144-pin LQFP package measuring 20 mm by 20 mm. The device belongs to the SAM3U family and combines a high-performance RISC processor, memory protection, and embedded system peripherals in an industrial-temperature surface-mount package. Its operating supply supports 1.8 V and 3.3 V systems, while its 144-pin LQFP footprint provides extensive I/O access. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor designed around the ARM Thumb-2 instruction set. It belongs to the broader MCU -> microcontroller -> embedded processor -> semiconductor hierarchy and is commonly used where deterministic control, efficient interrupt handling, and a compact embedded software ecosystem are required. The ATSAM3U1EB-AU is positioned as a general-purpose embedded controller rather than a dedicated analog, power, or communications component. Verified product information identifies ARM Cortex-M3 revision 2.0 operation to 96 MHz, a Memory Protection Unit, and the Thumb-2 instruction set. The ATSAM3U1EB-AU configuration contains 64 KB of embedded Flash and is supplied in a 144-LQFP package. The industrial temperature grade, green package designation, and availability from authorized distributors support use in embedded industrial equipment where a large leaded package and extensive peripheral connectivity are preferable to a compact surface-mount device. The SAM3U architecture is suitable for control-intensive systems that need predictable real-time behavior without the memory requirements of a higher-end application processor. The Memory Protection Unit helps isolate software tasks and protect memory regions, while the Cortex-M3 core supports efficient exception handling. The 96 MHz operating rate provides additional processing headroom for protocol management, data acquisition, control loops, and supervisory functions, although final firmware performance depends on peripheral access and memory configuration. Typical uses include industrial automation modules, data-acquisition equipment, communications controllers, embedded gateways, and compact control platforms. The 144-pin LQFP package makes the MCU particularly suitable for boards requiring many digital interfaces and legacy through-hole assembly compatibility. Designers should still allocate pins for power, ground, clock, programming, debug, and all required peripherals, while preserving adequate board area and copper for a 144-lead package. A key design consideration is that the ATSAM3U1EB-AU is a relatively high-pin-count MCU, so assembly yield, pin accessibility, and thermal performance should be evaluated carefully. The 20 mm by 20 mm LQFP body increases routing flexibility compared with a leadless package, but it also requires a larger footprint and deliberate escape routing. Production programming and board testing should be planned using the supported Microchip programming and debug interfaces identified in the manufacturer documentation. This product page consolidates verified distributor specifications, lifecycle information, pricing references, drop-in candidate analysis, and application-focused engineering guidance. It distinguishes confirmed manufacturer and distributor facts from parameters that remain unavailable in the supplied source data, helping engineers make sourcing and design decisions without relying on unverified assumptions.

RFC Hubungi kami
ATSAM3U1EB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip
ATSAM3U1EB-CU

ATSAM3U1EB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip

The Microchip Technology ATSAM3U1EB-CU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 96 MHz, with 64 KB of embedded flash memory, 20 KB of SRAM, and a 1.62V to 3.6V supply range, housed in a 144-ball LFBGA (13x13 mm) package. It belongs to the SAM3U family, which is built around the high-performance 32-bit ARM Cortex-M3 RISC processor. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded-computing hierarchy: MCU -> microcontroller unit -> embedded processor -> semiconductor. The SAM3U series targets high-pin-count, high-speed embedded applications where a 32-bit core outperforms 8-bit and 16-bit MCUs. Key features include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set for high code density, a Memory Protection Unit (MPU) for robust task isolation, and a 128-bit-wide flash access interface with a memory accelerator that sustains near-zero-wait-state execution at 96 MHz. The dual-bank flash architecture enables safe in-application programming and firmware updates. The SAM3U family is distinguished by an integrated high-speed USB Device port and a UART capable of up to 12 Mbps, making it well suited to communication-intensive designs. The SAM3U1EB variant provides 64 KB of flash in the same pinout as larger 256 KB siblings, allowing flash-size migration without PCB changes. Typical applications include USB-enabled industrial devices, data-logging equipment, gateways, and consumer electronics requiring a 32-bit core with flexible I/O on a 144-ball footprint. When designing, keep the 1.62V to 3.6V supply range in mind for battery or mixed-rail systems, and plan the BGA fanout and decoupling layout early, since 144-ball packages demand careful power-plane design. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
ATSAM3U2CA-AU - 96MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3U2CA-AU

ATSAM3U2CA-AU - 96MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3U2CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 96 MHz with 128 KB of embedded Flash and 36 KB of SRAM, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy (MCU -> embedded processor -> SoC -> application processor). The SAM3U family belongs to Atmel's (now Microchip's) ARM-based flash MCU portfolio and is positioned as a high-performance, USB-centric microcontroller for data-intensive embedded systems. Key features of the ATSAM3U2CA-AU include a High-Speed USB 2.0 Device port with embedded transceiver running at 480 Mbps, a 4 KB dedicated FIFO with up to 7 bidirectional endpoints and dedicated DMA, and a High-Speed MultiMedia Card Interface (HSMCI) supporting SDIO/SD/MMC. These peripherals distinguish the SAM3U series as one of the few Cortex-M3 MCUs with native 480 Mbps USB device capability. The memory subsystem provides 128-bit wide Flash access with a memory accelerator and dual-bank architecture, sustaining near-zero-wait-state execution at 96 MHz. The ARM Cortex-M3 revision 2.0 core includes a Memory Protection Unit (MPU) and Thumb-2 instruction set, while the peripheral set offers up to 4 USARTs (ISO7816, IrDA, flow control, SPI, and Manchester support), one UART, 2 TWI (I2C-compatible), 1 SPI, and 1 SSC (I2S). Backup features include a VDDBU domain with RTC and 32 backup registers, with an ultra-low-power RTC drawing only 0.6 uA. Typical applications include high-speed USB data loggers, mass-storage-class devices, audio bridging via I2S/SSC, and industrial gateways requiring SD-card storage. The combination of 480 Mbps USB and HSMCI makes the device well suited to moving large data volumes between USB hosts and removable media. A key design consideration is supply integrity: the device operates from a 1.62 V to 3.6 V single supply, and the High-Speed USB transceiver requires careful decoupling and controlled routing to pass USB signal-integrity compliance. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U2CA-CU - 96MHz Cortex-M3 MCU | Microchip
ATSAM3U2CA-CU

ATSAM3U2CA-CU - 96MHz Cortex-M3 MCU | Microchip

The Microchip Technology ATSAM3U2CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller rated up to 96 MHz, with 128 KB of embedded Flash memory, 36 KB of SRAM, and a 100-pin TFBGA package measuring 9 mm by 9 mm. The device is supplied for 1.8 V, 2.5 V, and 3.3 V operation, while its documented operating supply range extends from 1.62 V to 3.6 V. A flash microcontroller is a microcontroller category defined by a CPU, program memory, data memory, and integrated peripherals. Within the embedded semiconductor hierarchy, this device is an ARM Cortex-M3 RISC MCU, an SAM3U-series member, and a general-purpose embedded processing platform. The ARM Cortex-M3 core provides a 32-bit processing architecture suited to control logic, communication bridges, data logging, and human-interface systems that require more capability than an 8- or 16-bit MCU. The ATSAM3U2CA-CU combines a 96 MHz maximum clock with 128 KB of Flash and 36 KB of SRAM. The SAM3U family is specifically positioned for USB applications, including data loggers, PC peripherals, and high-speed bridges such as USB-to-SDIO, USB-to-SPI, and USB-to-external-bus interfaces. Its integrated USB capability makes the part relevant to compact USB-connected embedded products rather than general-purpose USB host controllers. The ATSAM3U2CA-CU is available in a compact 100-pin TFBGA package with a 0.8 mm pitch and green package construction. This fine-pitch ball-grid arrangement supports space-constrained designs but requires careful PCB layout, assembly process control, and adequate solder-ball inspection. The package also requires careful escape-routing planning because fine-pitch BGAs can complicate access to internal pins during design and rework. Typical applications include USB-to-serial or USB-to-SPI bridges, compact data loggers, PC peripheral controllers, embedded human-interface devices, and industrial equipment requiring a 96 MHz Cortex-M3 core. For USB designs, engineers should evaluate the required USB speed, endpoint count, transceiver implementation, power-supply sequencing, and firmware requirements against the family documentation before finalizing the board. The primary design consideration is package complexity. Unlike a leaded or larger-pitch MCU package, the 9 mm by 9 mm, 100-ball TFBGA requires a PCB design capable of supporting 0.8 mm ball pitch, small component clearances, and controlled assembly. The verified supply information also identifies ATSAM3U2CA-CU as a factory-programmable configuration, so firmware provisioning and order traceability should be reviewed with Microchip before production release. This product summary combines manufacturer-family data with distributor specifications, package details, sourcing information, and verified cross-reference results. It also separates confirmed drop-in alternatives from related family devices, helping engineers avoid treating mechanically similar but electrically different MPNs as direct replacements.

RFC Hubungi kami
ATSAM3U2EA-AU - 96MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3U2EA-AU

ATSAM3U2EA-AU - 96MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3U2EA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 96 MHz with 128 KB of embedded flash and 36 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into one chip, forming the complete control engine of an embedded system. Within the power-management hierarchy of electronics, the MCU sits above discrete logic and below application processors, and the SAM3U family belongs to Microchip (formerly Atmel) AT91 SMART ARM-based flash MCU portfolio, which targets high-throughput USB-connected embedded designs. Key features of the ATSAM3U2EA-AU include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set and a Memory Protection Unit (MPU), 128-bit-wide flash access with a memory accelerator and dual-bank architecture for concurrent read-while-write operation, and a supply range of 1.62V to 3.6V. The device integrates an internal 1.80V voltage regulator with a start-up time to Normal mode of less than 400 microseconds, simplifying power-tree design. Technically, the SAM3U family is distinguished by a high-speed USB Device port and an EBI (External Bus Interface), with peripherals clocked independently of the core so system designers can trade performance against power consumption. The 144-LQFP (20x20 mm) gull-wing package provides abundant GPIO for parallel displays, external memories, and industrial I/O, and the industrial temperature grade supports demanding environments. Typical applications include USB audio and mass-storage devices, industrial human-machine interfaces, data loggers, and instrumentation that benefits from the 96 MHz core bandwidth and fast flash access. The ATSAM3U2EA-AU fits designs that need substantial I/O count and USB connectivity without an operating system running from external memory. When designing with this device, decouple the internal 1.80V regulator per the Voltage Regulator section of the datasheet electrical characteristics, and verify flash wait-state settings at 96 MHz operation. Price data is as of 2026-09-19 (reference unit price about $9.12 from distributor listings). This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U2EA-CU - 96MHz 128KB Cortex-M3 MCU | Microchip
ATSAM3U2EA-CU

ATSAM3U2EA-CU - 96MHz 128KB Cortex-M3 MCU | Microchip

The Microchip Technology ATSAM3U2EA-CU is a 32-bit ARM Cortex-M3 flash microcontroller with a maximum clock frequency of 96 MHz, 128 KB of embedded flash memory, and 36 KB of SRAM in a 144-pin LFBGA package. It operates from a 1.8 V or 3.3 V supply according to the verified distributor data. The device belongs to the SAM3U family of embedded microcontrollers and combines a high-performance 32-bit RISC processor with flexible on-chip memory and integrated communication peripherals. A flash microcontroller is a semiconductor in which a microcontroller core, program memory, data memory, and peripherals are integrated into one package. The ATSAM3U2EA-CU sits within the hierarchy of embedded controller, 32-bit microcontroller, ARM Cortex-M processor, and SAM3U family. Its Cortex-M3 architecture provides 32-bit processing while retaining a compact embedded-control architecture suited to systems that require substantial flash memory, serial connectivity, and deterministic peripheral access without a separate external processor. The verified features include an ARM Cortex-M3 revision 2.0 core operating to 96 MHz, a Memory Protection Unit, and the Thumb-2 instruction set. The ATSAM3U2EA-CU configuration provides 128 KB of embedded flash and 36 KB of SRAM. The SAM3U family architecture supports a 128-bit-wide flash memory interface with a memory accelerator and dual-bank organization. These characteristics make the device appropriate for USB device-class equipment, removable storage interfaces, industrial data acquisition, and connected embedded controls. The integrated peripheral set includes a high-speed USB device port with an embedded transceiver, a high-speed memory card interface supporting SDIO, SD, and MMC, and an external bus interface. These interfaces allow a compact board to connect directly to USB hosts, flash-memory cards, and external bus peripherals. The Cortex-M3 processor and memory protection unit also support controlled execution and memory partitioning in firmware that separates application code from protected resources. Typical uses include USB-connected data loggers, SD-card-based industrial recorders, secure access terminals, portable test equipment, and embedded control systems requiring several serial interfaces. The 96 MHz operating ceiling provides substantial throughput for protocol handling, while 128 KB of flash stores application code, boot logic, configuration data, and firmware updates. The 36 KB of SRAM supports packet buffers, working memory, and moderate real-time processing workloads. When assigning the ATSAM3U2EA-CU, verify the complete pin-level power, ground, and peripheral assignments against the manufacturer datasheet. The 144-pin LFBGA requires a controlled PCB land pattern and careful thermal and escape-routing planning. Because the verified distributor excerpt does not provide the full electrical limits, pin names, or absolute maximum ratings, those values should not be inferred from the family-level description. This product record combines verified distributor specifications, manufacturer datasheet availability, package information, lifecycle status, source links, and application-focused engineering guidance. It also distinguishes the target from same-package family alternatives while clearly identifying parameters that require confirmation before substitution or production release.

RFC Hubungi kami
ATSAM3U4CA-AU - 96MHz 256KB Flash MCU | Microchip
ATSAM3U4CA-AU

ATSAM3U4CA-AU - 96MHz 256KB Flash MCU | Microchip

Microchip ATSAM3U4CA-AU is a 32-bit ARM Cortex-M3 microcontroller operating up to 96 MHz, with 256 KB of embedded Flash and 52 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. It combines a high-performance 32-bit RISC processor, dual-bank Flash, a Memory Protection Unit, and extensive serial peripherals for compact embedded control systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one package. The ATSAM3U4CA-AU belongs to the SAM3U family of ARM-based Flash microcontrollers. Its Cortex-M3 core supports the Thumb-2 instruction set and revision 2.0 architecture, providing a direct software-execution environment for control logic, communications, data acquisition, and human-interface applications. The device provides 128-bit-wide Flash access with a memory accelerator and dual-bank organization. It includes USB 2.0 device operation at 480 Mbps with a 4 KB FIFO and up to seven bidirectional endpoints. Communication resources include up to four USARTs, one UART, two TWI interfaces, one SPI interface, one SSC, and one HSMCI controller. The low-power RTC is specified at 0.6 µA in the cited device data. Operating from 1.8 V or 3.3 V, the ATSAM3U4CA-AU is suited to industrial control, data acquisition, USB-connected portable equipment, HMI panels, and embedded accessories. Its 52 KB SRAM supports protocol buffers, display data, and real-time control state, while dual-bank Flash can assist firmware update and supervisory code isolation when implemented according to the manufacturer’s procedures. Board design should preserve clean power distribution around the 100-pin LQFP. Place decoupling capacitors close to the supply pins, route high-speed USB and memory signals with short paths and a continuous reference plane, and check all peripheral pins against the exact package drawing before releasing artwork. Firmware should use the matching SAM device definition and peripheral configuration from Microchip’s development environment. Thermal design becomes important when the MCU operates continuously at 96 MHz with several communication peripherals active. Validate worst-case junction temperature, regulator headroom, and enclosure temperature rather than relying only on ambient temperature. Decoupling values, clock stability, USB impedance, and exposed functionality should be confirmed against the manufacturer datasheet and board-design guidance. This product record combines the verified device specifications, family-level replacement analysis, application guidance, and package-aware selection considerations. It helps engineers identify whether the 96 MHz Cortex-M3 architecture, USB support, memory capacity, and 100-pin LQFP footprint fit a design before committing to the ATSAM3U4CA-AU.

RFC Hubungi kami
ATSAM3U4CA-CU - 96MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3U4CA-CU

ATSAM3U4CA-CU - 96MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3U4CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 96 MHz, with 256 KB of embedded dual-bank Flash and 52 KB of SRAM, housed in a 100-pin TFBGA (9x9 mm) package. It belongs to the SAM3U series (originally developed by Atmel, now Microchip Technology). A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die; the ATSAM3U4CA-CU sits in the hierarchy of ARM Cortex-M3 based Flash MCUs within the broader ARM microcontroller and power/embedded-processing ecosystem. The SAM3U family is positioned as a high-performance, high-integration USB-enabled MCU line for embedded systems. Key features include the ARM Cortex-M3 revision 2.0 core running to 96 MHz with the Thumb-2 instruction set, a Memory Protection Unit (MPU), 128-bit wide Flash access with a memory accelerator for zero-wait-state execution at full speed, and dual-bank Flash (2 x 128 KB) enabling safe in-application programming and firmware upgrade. Per supply voltage options of 1.8V, 2.5V, or 3.3V, the device suits both battery-powered and rail-powered designs. Technically, the ATSAM3U4CA-CU combines the Cortex-M3 RISC pipeline with high-bandwidth memory access. The 128-bit wide Flash interface plus accelerator mitigates the classic flash-latency bottleneck of fast MCUs, while the dual-bank architecture allows code to execute from one bank while the other is erased or programmed. The MPU supports functional-safety-oriented software partitioning. The SAM3U series is also known for its High Speed USB Device port and embedded Flash of up to 256 Kbytes with up to 52 Kbytes of SRAM. Typical applications include USB device peripherals such as mass-storage and communication-class devices, industrial control nodes, and consumer embedded systems requiring 96 MHz-class processing with on-chip Flash. Design consideration: the TFBGA (9x9) ball-grid package requires controlled-impedance, ball-escape-routing PCB design and reflow assembly; budget decoupling on all supply balls and follow the manufacturer layout guidance for the 100-ball footprint. This page synthesizes verified distributor data, drop-in alternatives, pricing context, and practical design notes not consolidated in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U4EA-AU - 96MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3U4EA-AU

ATSAM3U4EA-AU - 96MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3U4EA-AU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 96 MHz with 256 KB of dual-bank embedded Flash and 52 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) surface-mount package. It belongs to the SAM3U family originally developed by Atmel and now part of Microchip Technology, engineered for high-throughput data-transfer applications such as USB peripherals and industrial gateways. A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, program memory, data memory, and peripherals (UART, SPI, I2C, timers, USB, ADC) onto one die. In the embedded processing hierarchy, the SAM3U4E sits between entry-level Cortex-M0 MCUs and higher-performance Cortex-M4 parts, with Cortex-M3 being its 32-bit RISC core architecture. The Cortex-M3 revision 2.0 runs at up to 96 MHz, executes the Thumb-2 instruction set, and includes a Memory Protection Unit (MPU) for memory isolation and OS-style privilege separation. Hypernym chain: SAM3U4E -> SAM3U family -> ARM Cortex-M3 MCU -> 32-bit microcontroller -> embedded processor -> integrated circuit. Key features include 256 KB of Flash accessed 128 bits wide through a memory accelerator that sustains near-zero wait-state execution from SRAM or Flash at full clock. The dual-bank architecture supports safe in-application programming (IAP) and firmware field updates without halting user code. A multi-layer AHB bus matrix, dedicated DMA channels, and Peripheral DMA Controllers (PDC) maximize concurrent peripheral throughput, while a high-speed USB 2.0 Full-Speed Device port with on-chip PHY targets USB data-acquisition designs. The architecture sustains high-speed peripheral transfers by allowing parallel bus-matrix transactions between the Cortex-M3 core, SRAM banks, USB, and DMA engines. This makes the device well suited to USB data-acquisition dongles, industrial gateways, and test-instrument front ends where deterministic throughput matters more than raw compute. Typical applications include USB data-acquisition modules, industrial control gateways, smart metering, point-of-sale terminals, and motor-control human-machine interface (HMI) panels. The 144-pin LQFP exposes up to four UART, three SPI, two I2C, USB, CAN, and a 12-bit ADC. Supply voltage spans 1.62V to 3.6V across the industrial temperature range -40C to +85C. Design consideration: at 96 MHz place at least one 100 nF decoupling cap per supply pin, keep the ground plane unbroken, and use the flash accelerator with zero wait-state Flash configuration; if execution timing is critical, copy hot routines to SRAM. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAM3U4EA-CU - 96MHz Cortex-M3 MCU 256KB Flash LFBGA-144 | Microchip
ATSAM3U4EA-CU

ATSAM3U4EA-CU - 96MHz Cortex-M3 MCU 256KB Flash LFBGA-144 | Microchip

The Microchip Technology (formerly Atmel) ATSAM3U4EA-CU is a 32-bit ARM Cortex-M3 microcontroller in the SAM3U family, featuring a 96 MHz CPU with up to 256 Kbytes of embedded Flash and 52 Kbytes of SRAM, packaged in a 144-ball LFBGA (10x10 mm). It integrates a High-Speed USB 2.0 Device port with embedded transceiver, a High-Speed MCI for SDIO/SD/MMC cards, an External Bus Interface, and a peripheral set tailored for high-throughput embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile program memory (Flash), and a configurable set of peripherals on one die. The ARM Cortex-M3 is a 32-bit RISC core designed by ARM Holdings and widely licensed across the embedded industry; it implements the Thumb-2 instruction set, offers deterministic interrupt latency, and includes an optional Memory Protection Unit (MPU) for separating kernel and user tasks. The SAM3U family sits in the Cortex-M3 hierarchy as a general-purpose, peripheral-rich derivative, ranking above Cortex-M0 parts in performance and below Cortex-M4 in DSP capability. Key features include 256 Kbytes of 128-bit-wide Flash with a memory accelerator and dual-bank organization, 52 Kbytes of SRAM, a 96 MHz maximum CPU clock, an integrated High-Speed USB 2.0 Device port, a 4-bit SDIO/SD/MMC Host interface, and a multi-layer AHB bus matrix. The device also offers up to 96 GPIO lines, a 12-bit ADC, multiple timers, USART, SPI, TWI, and an External Bus Interface supporting SRAM, NOR Flash, and NAND Flash memories. Technically, the SAM3U uses a Harvard bus architecture with a multi-layer AHB matrix that allows simultaneous CPU and DMA accesses across SRAM, Flash, and peripherals without contention. The integrated USB 2.0 High-Speed transceiver eliminates the need for an external PHY and supports up to 480 Mbps, while the 128-bit Flash bus enables zero-wait-state execution at full CPU speed from on-chip memory. Typical applications include USB peripherals such as industrial data loggers and instrumentation, smart-card readers, SD card readers, industrial control panels, and Human-Machine Interfaces (HMIs) where high data throughput, USB connectivity, and ample on-chip memory matter. The LFBGA-144 package and 1.8V/3.3V dual-voltage operation make it suitable for portable and battery-aware designs. When designing with this MCU, ensure the PCB layout provides a continuous ground plane beneath the BGA and adequate via stitching for thermal dissipation. Decoupling capacitors (100 nF plus 4.7 µF bulk) should be placed within a few millimeters of each supply pin to maintain signal integrity at the 96 MHz core frequency. This page synthesizes distributor pricing, cross-vendor drop-in alternatives, and practical design notes not found on a single manufacturer datasheet, giving component engineers a single decision-ready reference for the ATSAM3U4EA-CU.

RFC Hubungi kami
ATSAM3X2CA-AU - 84MHz 32-Bit ARM MCU | Microchip Technology
ATSAM3X2CA-AU

ATSAM3X2CA-AU - 84MHz 32-Bit ARM MCU | Microchip Technology

The Microchip Technology ATSAM3X2CA-AU is a 32-bit ARM Cortex-M3 microcontroller operating at up to 84 MHz, with a 1.62 V to 3.6 V supply range, 36K x 8 bits of SRAM, and a 100-LQFP (14 x 14 mm) package. It belongs to the SAM3X series and combines a high-performance processor core with embedded flash, SRAM, and peripheral integration in a surface-mount package. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The ATSAM3X2CA-AU is therefore a microcontroller, an embedded controller, a semiconductor, and a member of the broader industrial-control and embedded-processing categories. Its 84 MHz operating speed supports responsive control loops and real-time embedded tasks, while the 1.62 V to 3.6 V operating range permits integration with low-voltage digital systems. The verified product information identifies the device as a 36K x 8-bit RAM device in the SAM3X series. The listing also confirms its 84 MHz maximum speed and 100-LQFP package. Detailed flash capacity, peripheral configuration, pin assignments, electrical limits, and temperature ratings are not included in the supplied verified snippets and therefore are not inferred here. Those parameters should be confirmed in the complete manufacturer documentation before schematic capture or PCB layout. The 100-LQFP package provides 100 external lead positions and is intended for surface-mount assembly. Its 14 x 14 mm body is larger than the compact QFN packages used by many competing microcontrollers, but it provides a generous lead count for external peripheral connections. Engineers should use the official pin diagram and land pattern rather than infer connectivity from the package dimensions. Typical design roles include embedded control, sensor aggregation, communications equipment, and compact industrial automation. In these systems, the 84 MHz Cortex-M3 processor can execute control firmware while the integrated memory retains working data. The exact peripheral complement and communication capabilities must be verified before assigning USB, Ethernet, UART, CAN, or other functions to specific pins. A key design consideration is package-level planning. A 100-LQFP footprint requires adequate routing escape space, careful decoupling, and assembly-process verification. Designers should also confirm power sequencing, clocking, programming access, and every peripheral signal against the full ATSAM3X2CA-AU documentation. This page intentionally separates verified facts from missing technical fields. This page combines verified pricing, package, speed, memory, and source information with explicit engineering gaps, helping engineers evaluate the ATSAM3X2CA-AU without presenting unavailable flash, pinout, temperature, or compliance data as established facts.

RFC Hubungi kami
ATSAM3X4CA-AU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip (Tape & Reel)
ATSAM3X4CA-AU

ATSAM3X4CA-AU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM3X4CA-AU is a 32-bit ARM Cortex-M3 microcontroller running at 84 MHz with 256 KB (256K x 8) of embedded Flash memory, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and a rich set of peripherals onto a single silicon die, forming the heart of an embedded system. Within the semiconductor hierarchy, the ATSAM3X4CA-AU belongs to the SAM3X family of ARM Cortex-M3-based flash microcontrollers, under the broader categories of 32-bit MCUs, embedded processors, and integrated circuits. Microchip (which acquired Atmel, the original SAM3X designer) positions this family for applications needing significant processing headroom, connectivity, and analog integration. Key features of the ATSAM3X4CA-AU include the 84 MHz Cortex-M3 core delivering 1.25 DMIPS/MHz performance, 256 KB of Flash program memory, flexible supply operation from 1.62 V minimum (nominally 1.8 V, 2.5 V, or 3.3 V rails), and a Green Industrial temperature rating suitable for demanding industrial environments. The device integrates USB connectivity and a multi-source interrupt controller typical of the SAM3X architecture. Architecturally, the Cortex-M3 core combines a 3-stage pipeline with a Harvard bus structure, a nested vectored interrupt controller (NVIC) for deterministic low-latency interrupts, and a Thumb-2 instruction set that balances code density with performance. Flash memory is tightly coupled to the core for zero-wait-state execution in many access patterns, supporting real-time control loops. Typical applications include industrial automation and control nodes, 3D printers and motion control systems, consumer devices requiring USB connectivity, and embedded instrumentation. The Arduino Due development platform popularized the SAM3X family, giving this device a large ecosystem of libraries and reference designs. Design consideration: the device requires a 1.62 V minimum supply, so verify brown-out behavior on 3.3 V rails with high transient loads, and follow Microchip layout guidance for the LQFP-100 decoupling network. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami