Mikropengawal

Produk (20,000+)

PIC18F44K22-I/ML - 8-bit 64MHz XLP MCU 16KB Flash QFN-44 | Microchip
PIC18F44K22-I/ML

PIC18F44K22-I/ML - 8-bit 64MHz XLP MCU 16KB Flash QFN-44 | Microchip

The Microchip Technology PIC18F44K22-I/ML is a high-performance 8-bit PIC18 microcontroller with nanoWatt XLP extreme-low-power technology, integrating 16 KB Flash, 768 B SRAM and 256 B EEPROM in a 44-pin QFN-EP package with 64 MHz maximum clock speed. A PIC (Peripheral Interface Controller) microcontroller is a compact programmable processor that combines CPU, non-volatile program memory, working RAM, data EEPROM, and configurable peripherals on a single CMOS die. The PIC18 family uses an enhanced 8-bit RISC architecture with a 16-bit instruction word, while PIC18F 'K' series devices add the nanoWatt XLP energy-management extensions that allow peripheral clocks, oscillators and core logic to be turned off individually, dropping active current to the microampere range. The PIC18K22 sits in the mid-density flash tier, sharing a common peripheral set (10-bit ADC, comparators, PWM, mTouch capacitive sensing) with its sibling PIC18F46K22 / PIC18F45K22 parts that simply scale memory and pin count upward. Key specifications include 16 KB self-programmable Flash program memory, 768 B SRAM and 256 B EEPROM, 36 digital I/O pins multiplexed with peripheral functions, a 10-bit ADC with up to 28 input channels, two rail-to-rail analog comparators with programmable on-chip voltage reference, two CCP/ECCP/PWM modules and four 8/16-bit timer/counters. The nanoWatt XLP feature set delivers typical sleep currents under 100 nA with retention and a real-time-clock calendar mode from 32 kHz crystals. Operating voltage spans 1.8 V to 5.5 V (2.3 V minimum for full 64 MHz MIPS performance), suitable for both 3.3 V and 5 V rails. Typical applications span battery-powered sensor nodes, low-power IoT edge devices, USB-less human-interface panels, capacitive-touch button or slider front panels, small motor-control loops and 5 V industrial instrumentation. The wide VDD range and QFN-44 small footprint make it a flexible upgrade path for designs that previously used the older PIC18F4420 or PIC18F44J11 devices. Designers should review the Microchip PIC18F44K22 datasheet for the HFINTOSC, FVR, PLVD and mTouch peripheral programming models. Drop-in migration to PIC18F45K22 (32 KB Flash) and PIC18F46K22 (64 KB Flash) within the same QFN-44 package is supported, enabling memory scaling without PCB changes. This page consolidates distributor pricing, verified drop-in alternatives and pin-specific design notes drawn from manufacturer documentation, providing context that is not present in the standalone datasheet.

RFC Hubungi kami
PIC18F44K22-I/MV - 16KB Flash 8-bit MCU | Microchip
PIC18F44K22-I/MV

PIC18F44K22-I/MV - 16KB Flash 8-bit MCU | Microchip

The Microchip Technology PIC18F44K22-I/MV is an 8-bit PIC18 microcontroller from the nanoWatt XLP family, offering 16 KB of Flash program memory and 768 bytes of RAM in a 40-pin UQFN (5x5 mm) package. It supports clock speeds up to 64 MHz from an internal oscillator, integrates a 10-bit ADC with up to 28 channels, two enhanced USART modules, two MSSP (SPI/I2C) peripherals, and Microchip's nanoWatt eXtreme Low-Power technology for battery-sensitive designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control with modest memory and pin counts. PIC18F-series parts sit at the upper end of Microchip's 8-bit portfolio, combining C-friendly Harvard architecture, hardware multiplier, and rich peripheral integration. Within the broader taxonomy, the PIC18F44K22 belongs to the microcontroller category of integrated circuits, serving embedded control applications ranging from consumer appliances to industrial sensor hubs. Key features include a wide 2.3V to 5.5V supply range (functional down to 1.8V with internal regulator), an integrated 16 MHz to 64 MHz HFINTOSC with PLL, 36 digital I/O pins, and ultra-low-power sleep currents in the nanoampere range. The K22 series adds CTMU charge-time measurement, multiple PWM channels, and enhanced capture/compare peripherals for motor and lighting control. Architecturally, the device combines a RISC core with a hardware 8x8 multiplier, enabling efficient C code execution, and provides 256-byte data EEPROM for non-volatile parameter storage. The 32-level hardware stack and 31 interrupt sources make it well-suited to multi-tasking control loops. On-chip debugging is supported via two dedicated ICSP pins, allowing MPLAB X IDE integration without additional emulator hardware. Typical applications include low-power sensor nodes, IoT edge devices, white-goods motor control, LED lighting controllers, and industrial instrumentation requiring extended battery life. The compact UQFN-40 footprint also supports space-constrained wearables and handheld products. When designing with this part, select decoupling capacitors close to VDD/AVDD pins and route the 48 MHz HFINTOSC trace away from analog ADC inputs to minimize coupling. Use the internal regulator mode to reduce external components, and verify the UQFN thermal pad is soldered to a sufficient copper pour for reliable operation at high toggle rates. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC18F44K22-I/MV against direct substitutes in the PIC18F family.

RFC Hubungi kami
PIC18F44K22-I/P - 8-bit 64MHz XLP MCU 16KB Flash 40-PDIP | Microchip
PIC18F44K22-I/P

PIC18F44K22-I/P - 8-bit 64MHz XLP MCU 16KB Flash 40-PDIP | Microchip

The Microchip Technology PIC18F44K22-I/P is an 8-bit microcontroller from the PIC18F "K22" family with nanoWatt XLP extreme-low-power technology, 16KB of Flash program memory, 768 bytes of SRAM, and 256 bytes of EEPROM, housed in a 40-pin PDIP (0.600") through-hole package. According to the Microchip datasheet, it executes instructions at up to 64 MHz (16 MIPS) from a 2.3V-5.5V supply and exposes 36 digital I/O pins plus a 28-channel 10-bit ADC. The device is in production status on Microchip's product page, with newer-generation parts such as the PIC18F45Q10 noted as the recommended migration target. A PIC18 microcontroller is an 8-bit Harvard-architecture MCU built around a RISC core with hardware accumulator, hardware multiply, and a peripheral set optimized for low-power mixed-signal embedded designs. PIC18 sits at the top of Microchip's 8-bit PIC portfolio and shares a common instruction set across 28/40/44-pin packages, enabling firmware portability within the family. Within the power-management IC hierarchy it belongs to the broader "microcontroller -> MCU -> embedded controller -> semiconductor" taxonomy. Key features include 16KB self-programmable Flash, hardware CCP/ECCP modules, multiple Enhanced USART, SPI, I2C interfaces, a 10-bit ADC with up to 28 input channels, mTouch capacitive touch peripherals, nanoWatt XLP sleep currents as low as 20 nA, and 5 CCP PWM channels for motor and lighting control. The -I/P suffix denotes the industrial temperature grade (-40C to +85C) and PDIP-40 package. The architecture combines an 8-bit data path with a 16-bit instruction word, an 8-level hardware stack, and C-optimized architecture, which simplifies compiler output while preserving deterministic interrupt response. The peripheral set (ADC, comparators, CTMU, mTouch, EUSART, MSSP, ECCP) supports sensing, communication, and actuation without external logic. Typical applications include low-power sensor nodes, home-automation appliances, industrial control panels, capacitive touch user interfaces, motor control, and USB/serial bridging in cost-sensitive embedded designs. When designing with this MCU, leave headroom on Vdd for ADC accuracy and add a 100 nF decoupling cap adjacent to every supply pin. For firmware migration to newer families, validate the SFR map because newer Q-series parts reorganize peripheral registers.

RFC Hubungi kami
PIC18F44K22T-I/ML - 8-bit 64MHz 16KB Flash MCU | Microchip
PIC18F44K22T-I/ML

PIC18F44K22T-I/ML - 8-bit 64MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18F44K22T-I/ML is an 8-bit PIC18 enhanced microcontroller in the nanoWatt XLP family, offering 16KB of Flash program memory, 64 MHz maximum CPU clock, and 36 general-purpose I/O in a 44-pin QFN (ML) 8x8 mm package with exposed pad. It is supplied in tape-and-reel packaging (suffix T), with an industrial operating temperature range of -40C to +85C, and operates across 2.5V/3.3V/5V supply rails with a 1.8V-5.5V extended voltage range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on a single silicon die. The PIC18 family implements an enhanced 8-bit RISC architecture with 200 ns instruction execution (up to 16 MIPS at 64 MHz), targeting high-performance yet power-sensitive embedded designs. Within the broader taxonomy, PIC18F44K22 belongs to the 8-bit MCU category, which sits below 16-bit dsPIC and 32-bit ARM Cortex-M devices in both complexity and per-unit cost. It is one of three pin-compatible variants (40-pin, 44-pin, and 28-pin) sharing the same K22 peripheral family and codebase. Key features include nanoWatt XLP extreme-low-power technology with sleep currents down to ~20 nA, a 10-bit ADC with up to 28 channels, two Enhanced USART modules, two MSSP (SPI/I2C) ports, a 5-bit DAC, three ECCP and two CCP modules, two comparators, and a hardware RTCC. The integrated 16 MHz internal oscillator is factory calibrated to +/-1 percent, eliminating the need for an external crystal in many cost-sensitive designs. The architecture combines a 16-bit instruction word with an 8-bit data path, using a hardware multiplier for 8x8 unsigned operations in a single cycle and supporting C-compiler-friendly memory models. Internal self-programmability allows bootloader-based field upgrades, while the ICD/ICSP interface supports in-circuit debugging via tools such as MPLAB PICkit 5. Typical applications include low-power sensor nodes, AEC-Q100 automotive subsystems, industrial control (HMI, motor drive interfaces), consumer white goods, USB/serial bridge firmware, and battery-powered instrumentation. The QFN-44 footprint suits compact layouts where thermal performance matters. Design tip: leverage the nanoWatt XLP idle/sleep modes and run the CPU from the 16 MHz internal oscillator at 1 MHz during idle periods to extend battery life. Always tie the exposed pad of the QFN to a clean GND plane with multiple thermal vias for EMC and thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a single source for sourcing, comparison, and design-in decisions for the PIC18F44K22T-I/ML.

RFC Hubungi kami
PIC18F44K22T-I/MV - 16KB Flash XLP 8-bit MCU 40-UQFN | Microchip
PIC18F44K22T-I/MV

PIC18F44K22T-I/MV - 16KB Flash XLP 8-bit MCU 40-UQFN | Microchip

The Microchip Technology PIC18F44K22T-I/MV is a 8-bit PIC18 microcontroller built on Microchip's nanoWatt XLP technology platform, delivering 64 MHz CPU performance with 16 KB of Flash program memory and 768 B of RAM in a 40-pin UQFN (5x5 mm) package (designator MV). It is part of Microchip's low-power, high-performance PIC18 family and integrates peripherals including an enhanced universal synchronous/asynchronous receiver-transmitter (EUSART), multiple capture/compare/PWM (ECCP) modules, a 10-bit ADC, and the nanoWatt XLP power-management engine for ultra-low standby current. The 'T' suffix indicates tape-and-reel packaging, while 'I' denotes the industrial -40C to +85C operating temperature range. The 'MV' suffix specifies the 40-pin UQFN surface-mount package. A PIC18 microcontroller belongs to the 8-bit microcontroller category, sitting at the base of the embedded control hierarchy alongside 16-bit, 32-bit, and ARM Cortex-based MCUs. Within Microchip's portfolio, PIC18 sits between PIC16 (baseline) and dsPIC33 (digital signal controller) families. PIC18 parts use a modified Harvard RISC architecture with 16-bit instructions, an 8-bit data path, hardware multiplier, and C-friendly instruction set, and they serve as general-purpose microcontrollers in commercial, industrial, and consumer products. PIC18F K-series parts add nanoWatt XLP low-power features and high-performance analog for battery-powered and energy-efficient designs. Key features include 64 MHz (16 MIPS) operation from a 2.3V to 5.5V supply (typical operation extends to 5.5V), 36 programmable I/O pins, an internal 16 MHz oscillator with PLL, a 10-bit ADC with multiple input channels, two EUSART peripherals, two MSSP (SPI/I2C) peripherals, and Enhanced Capture/Compare/PWM modules. The device supports nanoWatt XLP idle/doze/sleep modes for battery-aware applications. The 40-UQFN (5x5 mm) package conserves board area while exposing the full peripheral set, including two analog comparators and a charge time measurement unit (CTMU) for capacitive touch. Technical depth: the device contains 64 KB of addressable program space (the program image in Flash is 16 KB), 3936 B of data SRAM, 256 B of EEPROM, a 32-level hardware stack, and an in-circuit debugger interface. The on-chip debug and ICSP programming pads give design engineers a low-cost development path using Microchip's PICkit or MPLAB SNAP tools. The microcontroller is supported by MPLAB X IDE and the free XC8 C compiler, and it integrates with Microchip's code-configurator ecosystem. Typical applications include industrial sensor signal conditioning with the ADC + CTMU, low-power battery IoT sensor nodes leveraging nanoWalt XLP sleep modes, USB HID peripherals using the MSSP/EUSART plus external transceiver, home appliance control, motor-control loops via the ECCP module, and human-interface boards with capacitive touch buttons. The wide -40C to +85C industrial temperature range makes the PIC18F44K22T-I/MV a workhorse for harsh-environment and factory-automation designs. When designing with this device, ensure the chosen 5x5 mm UQFN footprint and adjacent decoupling lands are on a clean ground pour. Place a 100 nF decoupling capacitor as close as possible to the VDD pins, and route the ICSP clock/data lines away from switching traces to maintain debug reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
PIC18F44K22T-I/PT - 8-bit 64MHz XLP MCU 16KB Flash | Microchip
PIC18F44K22T-I/PT

PIC18F44K22T-I/PT - 8-bit 64MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC18F44K22T-I/PT is an 8-bit PIC18F microcontroller from the nanoWatt XLP family, delivering up to 64 MHz CPU performance from a 16 KB (8K x 16) Flash program memory and 768 bytes of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile data memory (RAM), and a rich set of peripherals such as timers, ADC, communication ports, and GPIO. The PIC18F family is Microchip's 8-bit architecture with an enhanced instruction set, hardware multiplier, and C-compiler-friendly design, sitting in the broader hierarchy of MCU -> embedded controller -> semiconductor. The "K" series and "nanoWatt XLP" branding indicate ultra-low-power variants designed for battery-powered and energy-harvesting applications. Key features include 16 KB self-programmable Flash, 768 bytes RAM, 256 bytes EEPROM, up to 64 MHz operation, and an industrial-grade temperature range of -40C to +85C (I-suffix). Peripherals include multiple Enhanced USART, MSSP (SPI/I2C), 10-bit ADC with up to 30 channels (on 44-pin variants), 8-bit/16-bit timers, and PWMs. The "44K22" silicon supports nanoWatt XLP technology with sleep currents in the nanoamp range, making it well suited to portable and always-on designs. The PIC18F44K22T-I/PT variant is supplied in TQFP-44 (PT) industrial temperature grade and Tape-and-Reel packaging, denoted by the "T" suffix. It is part of the 28/40/44-pin PIC18F2X/4XK22 family that shares a common core, instruction set and peripheral IP, differing mainly in pin count, Flash/RAM size and analog channel count. This sharing enables seamless migration across PIC18F4XK22 and PIC18F2XK22 SKUs within the same PCB footprint family. Typical applications include low-power IoT sensor nodes, battery-powered handheld instruments, home automation and appliance controls, automotive body and accessory electronics (non-safety), and industrial sensor interface boards. The combination of low sleep current, generous Flash, and rich analog/digital peripherals makes it a flexible general-purpose MCU. When designing with the PIC18F44K22T-I/PT, ensure that the ICSP programming pins (PGC/PGD) are routed to a header for in-circuit programming, and that the supply decoupling (typically 100 nF on VDD plus bulk capacitance) is placed close to the pins. Verify the silicon revision and errata against the current datasheet, since K22-family revisions have had ADC and WDT errata updates. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC18F family, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
PIC18F4510-I/P - 8-bit 40MHz 32KB Flash MCU | Microchip
PIC18F4510-I/P

PIC18F4510-I/P - 8-bit 40MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F4510-I/P is an 8-bit PIC microcontroller based on the enhanced PIC18 Harvard architecture, featuring 32 KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, housed in a 40-pin PDIP (DIP-40) through-hole package. It runs at up to 40 MHz clock speed with an instruction cycle time of 100 ns (4 clocks per instruction) and operates from 4.2 V to 5.5 V supply, providing 36 digital I/O pins, a 10-bit Analog-to-Digital Converter with up to 13 input channels, two Enhanced USART modules, MSSP (SPI/I2C), and two CCP modules. The "I" suffix indicates the industrial operating temperature range of -40C to +85C, while the "/P" suffix denotes the PDIP-40 package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, peripherals, and interrupt logic on one die. The PIC18F family specifically targets high-performance 8-bit applications using a RISC-style instruction set with 16-bit opcodes, an 8-bit data path, and 31-level hardware stack, positioning it between simple PIC10/12/16 parts and the 16-bit dsPIC/PIC24 family. This hierarchy places the PIC18F4510 within the broader class of microcontrollers, then to embedded controllers, and finally to the larger embedded processing semiconductor category used for system-level design. Key differentiating features of the PIC18F4510 include nanoWatt technology for dynamic power management with multiple idle and sleep modes, a 10-bit A/D converter with up to 13 channels and auto-acquisition, two Enhanced USART ports supporting RS-232/RS-485, a Master Synchronous Serial Port (MSSP) configurable for SPI or I2C, and 4 timer modules (Timer0 through Timer3). The device also includes a 10-bit Pulse-Width Modulation (PWM) module, parallel slave port, and 13 channels of 10-bit ADC. The PIC18F4510 is engineered around the enhanced PIC18 core with hardware multiply support and C-compiler friendly architecture. It uses Flash program memory with self-programming capability, allowing in-field firmware updates via ICSP (In-Circuit Serial Programming). The device integrates an internal RC oscillator, a 10-bit ADC, and nanoWatt power management features in a single 40-pin PDIP package, balancing performance with cost-effectiveness for embedded designs. Typical applications include industrial control systems, automotive body electronics, consumer appliance controllers, HVAC systems, sensor interface modules, and educational/hobbyist projects. The 32 KB Flash and 1536-byte SRAM support C-based firmware using the MPLAB XC8 compiler, while the 36 I/O lines and 13 ADC channels enable interfacing with multiple sensors, switches, and communication peripherals. When designing with this device, consider the power consumption in sleep modes - the nanoWatt feature provides multiple low-power states. Decoupling capacitors (0.1 uF) should be placed close to VDD/AVDD pins, and the ICSP programming interface requires dedicated RB6/RB7 pin access. The 40-pin PDIP package enables easy prototyping on breadboards and through-hole PCBs. This page synthesizes distributor pricing, drop-in compatible alternatives within the PIC18F44 family, and practical design notes not commonly found in the manufacturer datasheet, providing engineers with a curated selection guide for new designs and legacy maintenance.

RFC Hubungi kami
PIC18F4515-E/ML - 8-bit 48KB Flash MCU, 44-VQFN | Microchip
PIC18F4515-E/ML

PIC18F4515-E/ML - 8-bit 48KB Flash MCU, 44-VQFN | Microchip

The Microchip Technology PIC18F4515-E/ML is an 8-bit Flash microcontroller from the PIC18F family, offering up to 48KB of program memory (24K x 16) and 25 MIPS performance at 5V, housed in a 44-pin VQFN exposed-pad package. The device features a C-compiler-optimized RISC architecture, an 8x8 single-cycle hardware multiplier, and an internal oscillator block supporting 31 kHz to 8 MHz with 4x PLL, providing flexible clocking across a 2V to 5.5V operating range. An 8-bit microcontroller is a single-chip computer that integrates a CPU, program memory (Flash), data RAM, EEPROM, and a rich set of peripherals (ADC, timers, communication ports) on one die. PIC18F devices specifically target mid-range embedded applications with C-friendly architecture (linear program memory, hardware multiply, hardware stack), placing them in the hierarchy MCU -> microcontroller -> embedded controller -> semiconductor. The nanoWatt Technology dynamic power-management modes in this family minimize active and sleep currents, extending battery life in low-duty-cycle applications. Key differentiating features include a 10-bit ADC with up to 13 channels, enhanced CCP modules, a programmable 16-bit timer, an enhanced USART supporting RS-485/RS-232, an MSSP port for SPI and I2C (master/slave), dual analog comparators, a 32 kHz secondary oscillator for real-time-clock use, fail-safe clock monitor, and a separate RC-oscillator watchdog timer. The enhanced instruction set adds 8x8 hardware multiply in a single cycle, table read/write to Flash, and a 31-level hardware stack. The Extended (-E) temperature grade supports -40C to +125C operation. The 44-pin VQFN with exposed pad offers a compact footprint while exposing a thermal pad that, when soldered to the PCB ground plane, dramatically lowers theta_JA and improves continuous full-speed operation. The MPLAB ICD and PICkit debuggers program Flash and provide in-circuit breakpoints through the standard ICSP interface, enabling firmware iteration without removing the chip. Typical applications include industrial automation (sensor conditioning with on-chip ADC, Modbus RS-485 node), automotive body and HVAC controls (AEC-Q100 equivalent Extended temp grade), medical low-power instrumentation (sleep-mode sensor reading), consumer appliances (user interface + motor/relay control), and USB-free embedded networking using enhanced USART. The combination of large Flash, 10-bit ADC, and nanoWatt modes also suits data loggers and remote sensor transmitters. A design consideration: the extended -E temperature variant is intended for harsh environments but operates at slightly different DC characteristics than the -I industrial grade; verify oscillator stability and ADC linearity across the full -40C to +125C range during validation, and place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
PIC18F4515-E/P - 8-bit 48KB Flash MCU, 40-Pin PDIP | Microchip
PIC18F4515-E/P

PIC18F4515-E/P - 8-bit 48KB Flash MCU, 40-Pin PDIP | Microchip

The Microchip PIC18F4515-E/P is an 8-bit RISC Flash microcontroller from the PIC18F family, delivering up to 10 MIPS performance at 3V, housed in a 40-pin PDIP through-hole package. The device integrates 48KB of Flash program memory, 3968 bytes of SRAM, and 256 bytes of EEPROM, with 36 digital I/O lines and a 10-bit A/D converter. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC18F family sits within Microchip's 8-bit PIC architecture hierarchy: PIC18F -> PIC18 -> PIC -> 8-bit MCU -> microcontroller -> embedded system. The PIC18F4515-E/P belongs to the nanoWatt power-managed family, providing flexible oscillator options including an internal 31 kHz to 8 MHz source with 4x PLL. Key features include a hardware 8x8 single-cycle multiplier, a Fail-Safe Clock Monitor (FSCM) for safe shutdown when the primary clock fails, and a separate Watchdog Timer with its own RC oscillator. The integrated 10-bit ADC supports multiple analog input channels, while dual analog comparators and a 10-bit Pulse-Width Modulation (PWM) module enable motor control and power-conversion designs. The 40-pin PDIP form factor is favored for hobbyist, breadboard, and legacy through-hole assemblies. The PIC18F4515-E/P's C-optimized RISC architecture allows efficient code generation with the MPLAB XC8 compiler. The -E suffix denotes the extended industrial temperature range (-40C to +125C). Internal peripherals such as the Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), Master Synchronous Serial Port (MSSP) supporting SPI and I2C, and a parallel slave port make this device suitable for communication-rich embedded applications. Typical applications include industrial control panels, sensor monitoring nodes, low-power motor drivers, and legacy 5V embedded systems. The wide operating voltage range of 2.0V to 5.5V supports battery-powered and USB-powered designs, while the nanoWatt technology enables sleep currents in the microamp range for energy-harvesting endpoints. When designing with this MCU, observe the 40-pin PDIP pinout shared with the PIC18F4X1X series and verify the 5V-tolerant I/O count against your application. Decouple VDD with at least 100 nF ceramic plus 10 uF bulk capacitors placed within 5 mm of the supply pins. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
PIC18F4515-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip
PIC18F4515-E/PT

PIC18F4515-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip

The Microchip Technology PIC18F4515-E/PT is an 8-bit RISC Flash microcontroller from the PIC18F family, featuring 48 KB of program Flash, 3968 bytes of RAM, 256 bytes of EEPROM, and 36 I/O pins in a 44-pin TQFP surface-mount package. It executes instructions at up to 10 MIPS from a 40 MHz internal clock (10 MHz input oscillator, 4x PLL option to 40 MHz) and integrates a 10-bit ADC with up to 13 channels, multiple Enhanced USART/CCP/ECCP peripherals, an Enhanced CAN 2.0B module, and the nanoWatt power-managed sleep modes that made the PIC18F45xx series a workhorse for industrial and automotive embedded designs. The 'E' suffix designates the Extended (-40C to +125C) operating temperature range, while the '/PT' suffix specifies the 44-pin TQFP (Thin Quad Flat Pack) package supplied in Tray. A PIC (Peripheral Interface Controller) microcontroller is a Harvard-architecture, RISC-based single-chip computer that integrates CPU, Flash program memory, RAM, EEPROM, timers, communication peripherals, and I/O on one die. Within the broader semiconductor taxonomy, PIC MCUs belong to Microcontrollers > 8-bit MCUs > Flash MCUs > Embedded Controllers, and they are designed for deterministic real-time control with low power consumption. The PIC18 family is the upper end of Microchip's 8-bit line, adding 16-bit-wide instructions, hardware multiply, and linear program memory up to 2 MB. Key features of the PIC18F4515 include 48 KB Flash (24K x 16), 3.8 KB RAM, 256 B EEPROM, a 10-bit A/D converter with 13 input channels (shared with analog-capable I/O), a CAN 2.0B controller with DMA-style message buffering, an Enhanced USART, MSSP (SPI/I2C), two CCP and one ECCP module, two 8-bit and three 16-bit timers, a 16-bit timer with Gate Control for motor control, and the nanoWatt power-managed run/IDLE/sleep modes. The 44-TQFP package gives a compact 10x10 mm footprint with 0.80 mm pitch and supports standard SMT assembly. Typical applications for the PIC18F4515 include CAN node endpoints in automotive body and chassis ECUs, industrial sensor hubs, motor control boards, building automation nodes, and any embedded system that needs CAN bus connectivity plus moderate Flash. The 10-bit ADC and 13 analog inputs suit it well for multi-signal acquisition. The device supports In-Circuit Serial Programming (ICSP) via MPLAB X IDE, MPLAB XC8 C compiler, and PICkit 5 debug probe. When designing with the PIC18F4515, reserve 5V supply margin and follow Microchip's recommended decoupling (0.1 uF + bulk) on VDD/VSS pairs, plus a 10 uF bulk on AVDD/AVSS for ADC accuracy. For CAN, terminate the bus with 120 ohm at each end and respect the bus-length vs baud-rate tradeoff. Migration paths include the PIC18F45K22 (more RAM, nanoWatt XLP) and the PIC18F46K22, both in pin-compatible TQFP-44. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design guidance not consolidated on the manufacturer datasheet.

RFC Hubungi kami
PIC18F4515-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip
PIC18F4515-I/ML

PIC18F4515-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4515-I/ML is an 8-bit RISC microcontroller in the PIC18 family, delivering up to 10 MIPS performance from a C compiler-optimized architecture housed in a 44-pin QFN package with industrial -40C to +85C temperature rating. Key headline specifications include 48 KB of Flash program memory, 3968 bytes of SRAM data memory, a maximum clock speed of 40 MHz, and 36 general-purpose I/O pins. The part integrates Enhanced USART (EUSART), MSSP (I2C/SPI), and Parallel Slave Port (PSP) connectivity alongside four timers and multiple PWM channels. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package, allowing it to sense, compute, and actuate in embedded systems. Within the broader taxonomy, the PIC18F4515 belongs to the 8-bit MCU category, then to the flash-microcontroller family, then to the PIC18 enhanced-flash series, and finally to the integrated circuit (semiconductor) class. It is built on CMOS process technology and includes nanoWatt power management, which makes it suitable for both battery-powered and line-powered applications. Key differentiating features include a 10-bit ADC with up to 13 input channels, an internal oscillator block programmable from 31 kHz to 8 MHz, a hardware 8x8 single-cycle multiplier, and a Fail-Safe Clock Monitor that allows safe shutdown if the primary clock fails. The device also provides a separate RC-oscillator-backed Watchdog Timer for independent system recovery. Architecturally, the PIC18F4515 uses a Harvard-class RISC core with separate program and data buses, allowing instruction fetch and data access to occur in the same cycle. The on-chip Flash supports self-programming under software control, enabling field firmware updates and bootloader-style in-application re-flashing without an external programmer. Typical applications include industrial control panels, sensor interface nodes, USB-to-UART bridges, motor-control signal conditioning, and home appliances. The wide peripheral set and nanoWatt idle modes also suit it for low-power remote sensor nodes and HVAC thermostat controllers. When designing with this device, ensure the Vdd decoupling network uses a 100 nF ceramic cap placed within 5 mm of each Vdd pin and that the MCLR pin is pulled high through a 10 kohm resistor with a 100 nF cap to ground for in-circuit serial programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami
PIC18F4515-I/P - 8-bit 40MHz 48KB Flash MCU 40-PDIP | Microchip
PIC18F4515-I/P

PIC18F4515-I/P - 8-bit 40MHz 48KB Flash MCU 40-PDIP | Microchip

The Microchip PIC18F4515-I/P is an 8-bit PIC18F-series microcontroller running at 40 MHz with 48 KB of Flash program memory (24K x 16 words), 3,968 bytes of SRAM, and 256 bytes of EEPROM, packaged in a 40-pin PDIP (Plastic Dual-In-line Package) for through-hole industrial and educational designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC18F family uses a modified Harvard RISC architecture with 16-bit instructions and 8-bit data path, designed by Microchip as the high-performance tier of their 8-bit portfolio and widely deployed in motor control, instrumentation, and embedded control. Key features include the 40 MHz internal oscillator support, nanoWatt Technology for low-power sleep modes, a 10-bit ADC with up to 13 input channels, two USART modules, an MSSP (Master Synchronous Serial Port) supporting SPI and I2C, two CCP (Capture/Compare/PWM) modules plus an enhanced ECCP, and a parallel slave port for external bus interfacing. The 36 digital I/O pins are 5V tolerant, with hardware PWM and interrupt-on-change capability. Architecturally, the device uses a 16-bit modified Harvard core with 32 KB of linear program addressing, an 8x8 hardware multiplier, and a priority-interrupt controller. The 48 KB Flash supports self-programming, enabling in-field firmware updates via bootloader, and the nanoWatt Technology suite provides deep-sleep current in the microamp range for battery-backed applications. Typical applications include industrial control panels, HVAC fan and damper controllers, security and alarm panels, low-end automotive body modules, instrumentation front-ends, and educational/development platforms such as the PICDEM board ecosystem, where the 40-pin PDIP allows easy breadboard prototyping. When designing with this part, ensure the MCLR reset pin is properly pulled up with a 10 kohm resistor and that VDD decoupling includes a 100 nF ceramic capacitor placed within 5 mm of each power pin. Programming is supported via the ICSP interface using the MPLAB PICkit 5, ICD 4, or MPLAB X IDE 6.x toolchain, with no external crystal required when using the internal oscillator. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the PIC18F family, and practical design notes drawn from the manufacturer datasheet - content not found on any single distributor or manufacturer page.

RFC Hubungi kami
PIC18F4515T-I/PT - 8-Bit 40MHz 48KB Flash MCU TQFP-44 | Microchip
PIC18F4515T-I/PT

PIC18F4515T-I/PT - 8-Bit 40MHz 48KB Flash MCU TQFP-44 | Microchip

The Microchip Technology PIC18F4515T-I/PT is an 8-bit PIC18F-family microcontroller (MCU) running at up to 40 MHz, integrating 48 KB of Flash program memory organized as 24K x 16 words, 3.8 KB of data RAM, and a 10-bit Analog-to-Digital (A/D) converter, housed in a 44-pin TQFP (10x10 mm) package. The part carries the "T" tape-and-reel packaging suffix and the "I" industrial temperature grade (-40C to +85C). A PIC microcontroller is a compact single-chip computer that integrates a CPU, program memory, RAM, peripherals (A/D converters, timers, communication ports), and I/O on one die. PIC18F-series parts use an enhanced 8-bit RISC core with 16-bit instructions and 8-bit data, scaling from simple 18-pin devices up to 80-pin parts. PIC MCUs sit within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and are widely used for cost-sensitive real-time control. This PIC18F4515T-I/PT specifically targets mid-pin-count designs that need abundant I/O and an integrated A/D. Key features include 36 digital I/O pins, a 10-bit A/D converter with up to 13 input channels, nanoWatt Technology power management for low-power sleep modes, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), a Master Synchronous Serial Port (MSSP) supporting SPI and I2C, up to four 8/16-bit timers, and a Capture/Compare/PWM (CCP) module. The device operates from 4.2 V to 5.5 V. Architecturally, the PIC18F4515 uses an enhanced Harvard architecture with separate program and data buses, a 31-level hardware stack, and a 16-bit instruction word. The internal oscillator options and PLL block reduce external component count. nanoWatt Technology adds multiple idle/sleep modes with dynamic clock switching for battery-aware designs. Typical applications include industrial control panels, HVAC control boards, motor control signal conditioning, automotive body electronics, sensor interface front-ends, and consumer white goods. The 36 I/O lines and 13-channel ADC make it a strong fit for multi-channel analog monitoring boards. When designing with this MCU, place a 0.1 uF decoupling capacitor adjacent to every VDD/VSS pair, follow Microchip's recommended oscillator layout if a crystal is used, and ensure MCLR has its required pull-up network. ICSP/ICD programming requires the standard 5-pin Microchip header. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone datasheet.

RFC Hubungi kami
PIC18F452-E/L - 8-bit PIC MCU, 32KB Flash, 40MHz, 44-PLCC | Microchip
PIC18F452-E/L

PIC18F452-E/L - 8-bit PIC MCU, 32KB Flash, 40MHz, 44-PLCC | Microchip

The Microchip Technology PIC18F452-E/L is an 8-bit RISC PIC18 microcontroller featuring 32KB of Flash program memory, 1536 bytes of RAM, and 256 bytes of EEPROM, operating at up to 40MHz (10 MIPS) in a 44-pin PLCC (J-Lead) package. It delivers 34 digital I/O lines, an 8-channel 10-bit Analog-to-Digital converter, two Capture/Compare/PWM modules, an MSSP configurable as SPI or I2C, and a USART for asynchronous or synchronous serial communication. The extended (-E) temperature grade supports 4.2V to 5.5V operation across the industrial range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripherals such as timers, ADCs, and communication interfaces into one IC. The PIC18F family sits at the upper end of Microchip's 8-bit portfolio, with an enhanced instruction set, hardware multiplier, and 16-bit-wide instruction words that double throughput versus the baseline PIC16 architecture. Within the broader taxonomy, the PIC18F452 belongs to the PIC18F45x sub-family, sharing pinout and code compatibility with PIC18F242/442/252/452 devices in 28- and 40/44-pin packages. Key features of the PIC18F452-E/L include self-programmability for in-application firmware upgrades, an ICD (In-Circuit Debugger) interface for development, nanoWatt Technology power management with multiple idle and sleep modes, and code protection via configuration bits. The 40MHz clock provides 10 MIPS execution, while the 8-channel 10-bit ADC supports up to 8 analog inputs for sensor acquisition. The two CCP modules deliver flexible PWM, capture, and compare functions for motor control or timing applications. Typical applications span industrial control systems, HVAC equipment, automotive body electronics, sensor signal conditioning, and embedded control panels. The wide 4.2V-5.5V supply tolerance and robust peripheral set make it well suited to 5V legacy designs that require deterministic real-time response without resorting to a 32-bit core. Design consideration: choose the PIC18F452-I/L variant for room-temperature-only designs to reduce cost; choose PIC18F452-E/L when industrial temperature tolerance is required. Existing PIC18F452 PCB layouts can be reused if the MCU package footprint matches. This page synthesizes distributor pricing, drop-in replacement alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip
PIC18F452-E/ML

PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18F452-E/ML is an 8-bit RISC CMOS FLASH-based microcontroller delivering 10 MIPS (100 ns instruction execution) at 40 MHz, packaged in a 44-lead QFN (8x8 mm) with 32KB of program memory (16K x 16) and 1536 bytes of RAM. The -E suffix denotes the Extended industrial temperature grade (-40C to +125C), and /ML denotes the lead-free QFN surface-mount package. What is a PIC18F 8-bit microcontroller? The PIC18F family is Microchip's high-performance 8-bit architecture built on a Harvard RISC core, upward compatible with PIC16C5X/PIC12CXXX/PIC16CXX/PIC17CXX devices. It targets mid-range embedded designs requiring more code space, more peripherals, and faster throughput than the PIC16F baseline. In the broader taxonomy: PIC18F -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. This positioning makes it a workhorse for industrial control, instrumentation, and automotive subsystems. Key features include 256 bytes of EEPROM, self-programming capability, an ICD (In-Circuit Debugger) interface, two Capture/Compare/PWM modules, an 8-channel 10-bit Analog-to-Digital converter, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. The C-compiler-friendly instruction set contains only 77 single-word instructions, lowering the learning curve for new firmware developers. Architecturally, the PIC18F452 integrates a 16-bit wide instruction path with separate program and data buses, enabling single-cycle instruction fetch plus ALU operation in most cases. The 10-bit ADC with 8 channels supports acquisition of mixed analog signals from sensors, while the dual PWM modules provide flexible motor or power control. The extended temperature grade (E) plus QFN package make it suitable for thermally constrained or vibration-prone environments. Typical applications include industrial automation controllers, HVAC peripherals, automotive body modules, sensor signal conditioning, and battery-powered metering. The combination of EEPROM storage and self-programming also supports field-upgradeable end products. When designing with this device, ensure the 44-QFN exposed pad is properly soldered to a sufficiently large copper pour for thermal dissipation; QFN packages require careful PCB layout to avoid tombstoning. For new designs, consider the pin-compatible PIC18F4520 family which offers enhanced peripherals and nanoWatt technology for lower sleep current. This page synthesizes distributor pricing, drop-in alternatives from the PIC18F family, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology
PIC18F452-E/P

PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology

The Microchip Technology PIC18F452-E/P is an 8-bit CMOS Flash microcontroller with a 40 MHz clock speed, 32 KB of Flash program memory, 1536 bytes of RAM, 256 bytes of EEPROM, and 34 I/O pins in a 40-pin PDIP package. It also provides eight 10-bit analog-to-digital converter channels, two capture/compare/PWM modules, and serial interfaces configurable for SPI or I2C. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, digital I/O, timers, communications peripherals, and analog conversion functions on one semiconductor die. The PIC18F452 belongs to the PIC18 8-bit microcontroller family, which is part of the broader embedded-controller hierarchy: PIC18 MCU, 8-bit microcontroller, embedded controller, and embedded semiconductor. This integration allows one device to replace separate processor, timer, communications, and analog-interface components in compact control systems. Key features include 10 MIPS execution performance, a 77-instruction single-word instruction set, 32 KB of self-programmable Flash memory, 1536 bytes of data RAM, and 256 bytes of EEPROM. The eight-channel 10-bit ADC supports analog sensor acquisition, while the configurable serial peripheral interface supports either 3-wire SPI or 2-wire I2C communication. The operating supply range shown in the verified data is 4.2 V to 5.5 V. The PIC18F452 architecture provides one 8-bit and three 16-bit timers, as identified by the supplied technical references, together with programmable digital I/O and PWM resources. These peripherals make it possible to measure time, capture input events, generate PWM outputs, acquire analog signals, and communicate with external sensors or controllers without requiring separate logic devices. Its Flash-based program memory also supports field reprogramming when the application requires self-programming. Typical applications include industrial process-control equipment, environmental monitoring, data acquisition, appliance controllers, instrumentation, and compact embedded products. The eight ADC channels are useful for temperature, pressure, level, and other analog measurements, while SPI and I2C permit connection to displays, sensors, memory devices, and communication transceivers. Its 34 I/O pins also provide ample control and monitoring capacity for moderately complex embedded systems. Designers should preserve adequate decoupling around the supply pins and route oscillator, reset, analog, and communication signals according to the manufacturer’s recommendations. Firmware must also account for the PIC18F452’s peripheral configuration, interrupt behavior, ADC acquisition requirements, and operating voltage range. The -E grade and PDIP package should be checked against production temperature, environmental, and board-assembly requirements before design release. This page consolidates the verified manufacturer and distributor information, distinguishes the available same-package alternatives, identifies missing pricing and package-level details, and adds practical application guidance that is not presented as a substitute for the complete Microchip PIC18FXX2 Data Sheet 39564c.

RFC Hubungi kami
PIC18F452-E/PT - 8-Bit 40MHz Flash MCU | Microchip
PIC18F452-E/PT

PIC18F452-E/PT - 8-Bit 40MHz Flash MCU | Microchip

The Microchip Technology PIC18F452-E/PT is an 8-bit PIC microcontroller with a 40 MHz maximum clock, 32 KB of Flash program memory, 1,536 bytes of RAM, and 256 bytes of EEPROM in a 44-pin TQFP package. The -E suffix identifies the extended-temperature device, while the PT suffix identifies the 10 x 10 mm TQFP packaging option. A PIC microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, data memory, and peripherals on one semiconductor device. PIC18F452 belongs to the PIC18 high-performance, enhanced-Flash family and combines a RISC-like instruction set with integrated timers, serial interfaces, interrupt handling, and analog conversion. This MCU can also execute its own Flash program memory, allowing supported in-circuit programming and bootloader-style operations. The device provides 10 MIPS instruction throughput, with a 100 ns instruction-cycle figure cited for the PIC18FXX2 family. Its instruction set contains 77 single-word instructions, reducing program-memory consumption for common control tasks. The integrated peripherals include eight 10-bit analog-to-digital converter channels, two capture/compare/PWM functions, and a synchronous serial port configurable for either three-wire SPI or two-wire I2C communication. A 256-byte EEPROM provides nonvolatile parameter storage separate from the main Flash program area. PIC18F452-E/PT operates from a 4.2 V to 5.5 V supply and is designed for embedded control systems that combine event timing, serial communications, and modest analog measurement. Its 34 I/O pins allow digital interfaces to coexist with analog channels in industrial equipment, instrumentation, communications modules, and educational control platforms. The 10-bit ADC supports sensor conditioning and process monitoring, while the timer and PWM resources suit motor, lighting, and repetitive actuator control. The 44-pin TQFP package is suitable for automated surface-mount assembly and provides a practical pin density for laboratory boards, embedded controllers, and production control products. When designing the PCB, route decoupling capacitors close to the supply pins, keep analog inputs away from high-current switching traces, and use the manufacturer pin-description table to assign every signal. The MCU has no dedicated USB or Ethernet interface, so network-connected designs require suitable external communication hardware. Programming normally uses the PIC18 instruction set through a compatible compiler, assembler, programmer, and debug interface. Verify the exact configuration words, oscillator settings, peripheral pin assignments, and programming requirements against the manufacturer datasheet before releasing firmware. The self-programming capability can support applications that update their own code, but production firmware should include rollback and power-failure safeguards. This product page consolidates the verified PIC18F452-E/PT specifications, package details, source links, drop-in comparison options, and practical design guidance. The comparison is intentionally limited to same-footprint candidates because package and pin compatibility are prerequisites for a true drop-in replacement.

RFC Hubungi kami
PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC
PIC18F452-I/L

PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC

The Microchip Technology PIC18F452-I/L is an 8-bit enhanced flash microcontroller from the PIC18F family, operating at up to 40 MHz (10 MIPS) and packaged in a 44-pin PLCC (16.59 x 16.59 mm) form factor. It integrates 32 KB of flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM, and exposes 34 I/O pins suitable for embedded control. A microcontroller is a single-chip computer that combines a CPU, memory, and programmable peripherals. The PIC18F452 belongs to the 8-bit MCU class within the broader microcontroller hierarchy (8-bit MCU -> MCU -> embedded processor -> semiconductor). Its enhanced PIC18 core offers 77 single-word instructions and C-compiler-friendly architecture, making it popular for both educational and industrial designs. Key features include eight channels of 10-bit analog-to-digital conversion, two capture/compare/PWM modules, an MSSP configurable as SPI or I2C, a USART, an ICD (in-circuit debugger) interface, and self-programming flash. Operating voltage spans 4.2 V to 5.5 V, and the device supports nanoWatt power management for low-power applications. The architecture is a Harvard-type RISC design with a 16-bit instruction word and an 8-bit data path, allowing 100 ns instruction execution at 40 MHz. The wide operating range and rich peripheral set make it suitable for industrial automation, motor control, sensor conditioning, and consumer products requiring deterministic real-time response without an external DSP. Typical applications include industrial control panels, HVAC systems, motor-control boards, USB-to-serial bridges with an external interface IC, and instrumentation front-ends. Designers value the PIC18F452 for upward code compatibility with PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX devices. A key design consideration is the operating voltage: the 'I' suffix denotes an industrial temperature range of -40 C to +85 C and 4.2 V to 5.5 V supply. Designers migrating to the 'LF' variant must account for the 2.0 V to 5.5 V extended range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, supporting faster BOM decisions and supply-chain risk mitigation for the PIC18F452-I/L.

RFC Hubungi kami
PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip
PIC18F452-I/P

PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18F452-I/P is an 8-bit PIC18F-family CMOS Flash microcontroller delivering up to 10 MIPS (40 MHz) performance in a 40-pin PDIP (0.600") through-hole package. It integrates 32 KB of Flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM data memory. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, plus configurable peripherals. PIC18F devices belong to Microchip's 8-bit PIC family, which combines RISC architecture with C-compiler-friendly instruction set and NanoWatt power management. Within the broader taxonomy, PIC18F452 sits under Microcontroller (MCU) -> 8-bit MCU -> PIC18F enhanced Flash family -> embedded computing IC -> semiconductor. Key features include 34 digital I/O pins, an 8-channel 10-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, an enhanced USART supporting RS-232/RS-485, a Master Synchronous Serial Port configurable as SPI (3-wire) or I2C (2-wire), one 8-bit and three 16-bit timers, self-programming capability, and ICD in-circuit debugging support. Operating voltage spans 4.2 V to 5.5 V across the industrial -40C to +85C temperature range. The PIC18F452 uses an enhanced Harvard architecture with a 16-bit instruction word and separate program/data buses, achieving 100 ns instruction execution. The 77 single-word instruction set simplifies C compiler code generation while the 16-level hardware stack and 8 x 8 hardware multiplier accelerate arithmetic throughput. NanoWatt technology adds multiple power-managed modes (Idle, Sleep) for battery-aware designs. Typical applications include industrial control panels, HVAC and appliance controllers, sensor signal conditioning nodes, RS-232/RS-485 sensor gateways, motor control interfaces (using CCP/PWM), low-cost data acquisition with on-chip ADC, and educational/COMPILER development platforms. The wide 4.2-5.5 V range also suits USB-powered and 5 V bus systems. When designing with this part, ensure oscillator stability (HS or XT modes), use adequate decoupling (100 nF near each VDD/VSS pair), and verify ADC acquisition time settings for chosen source impedance. Note the I/P suffix denotes industrial temperature grade and PDIP-40 package. This page synthesizes distributor pricing across DigiKey, Mouser and LCSC, drop-in PIC18F alternatives, and practical design notes that are not found in the standalone manufacturer datasheet.

RFC Hubungi kami
PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip
PIC18F452-I/PT

PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F452-I/PT is a high-performance 8-bit PIC18 microcontroller running at 40MHz (10 MIPS) with 32KB of Flash program memory and 1.5KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates 256 bytes of EEPROM, 34 digital I/O lines, and 8 channels of 10-bit Analog-to-Digital conversion, making it a versatile single-chip solution for embedded control systems. A microcontroller (MCU) is an integrated circuit combining a CPU, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and configurable peripherals (timers, ADC, communication ports) on a single silicon die. MCUs form the lowest tier of the computing hierarchy, embedded beneath microprocessors in everything from consumer appliances to industrial controllers, and they execute firmware directly from on-chip Flash rather than external memory. The PIC18 family is Microchip's high-tier 8-bit line, providing 16-bit-wide instructions and a C compiler-friendly architecture. Key features of the PIC18F452-I/PT include a 10 MIPS execution rate (100 ns instruction cycle), 256 bytes of data EEPROM, an ICD-friendly In-Circuit Debugger interface, two Capture/Compare/PWM modules, a Master Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C, and a USART with 9-bit address masking. The device supports self-programming, allowing firmware upgrades in the field without external programmer hardware, and it consumes microamp-range currents in Sleep mode through nanoWatt technology. Architecturally, the PIC18F452 uses an enhanced Harvard architecture with separate program and data buses, a 16-bit instruction word (vs 14-bit in PIC16), and a hardware multiplier capable of 8x8 single-cycle operations. Its 40 MHz internal clock can be derived from crystals, resonators, or internal RC oscillators, and the wide 4.2V to 5.5V supply range suits both battery and line-powered designs. Typical applications include industrial automation controllers, automotive body and HVAC modules, consumer appliance control boards, low-end data acquisition systems, and educational/development platforms where code portability from older PIC16/PIC17 designs is required. The 8-channel ADC is well matched to sensor multiplexing in instrumentation. When designing with this device, note that the 40-pin PDIP and 44-pin TQFP variants share the same peripheral set but differ in available I/O count; the TQFP version exposes all 34 I/O pins including additional high-priority interrupts. Always provide adequate decoupling (0.1 uF + 10 uF bulk) near VDD/AVDD/VSS pins.

RFC Hubungi kami
PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip
PIC18F4520-E/ML

PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4520-E/ML is an 8-bit enhanced flash microcontroller from the PIC18F family, delivering up to 10 MIPS performance at 3V in a 44-pin QFN (8x8 mm) surface-mount package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM data memory, with a 25 MHz (40 MHz input clock) CPU core. The -E suffix denotes the extended industrial temperature grade (-40C to +125C operating range). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), peripherals (timers, ADC, communication ports), and interrupt logic on one die. Within the broader taxonomy, MCUs sit under microprocessors, themselves a subset of processors and digital logic integrated circuits. PIC18F-series microcontrollers use Microchip's enhanced Harvard RISC architecture with C-compiler-optimized instruction set and a single-cycle hardware 8x8 multiplier, balancing deterministic real-time control with code density. The PIC18F4520 specifically occupies the high-pin-count, high-memory tier of the PIC18F2x20/4x20 family and is pin-compatible with the PIC18F4420 and PIC18F2520 footprints. Key differentiating features of the PIC18F4520-E/ML include: 36 digital I/O pins across five ports (RA, RB, RC, RD, RE), a 10-bit ADC with up to 13 input channels, two analog comparators, two CCP modules plus one ECCP (enhanced capture/compare/PWM), three 16-bit timers plus one 8-bit timer, hardware USART (EUSART), MSSP (SPI/I2C), a 31 kHz to 8 MHz internal oscillator block with 4x PLL (up to 32 MHz), fail-safe clock monitor, separate watchdog RC oscillator, and nanoWatt power management with idle and sleep modes. This is a complete set of legacy-friendly peripherals in a small 8x8 mm QFN. Architecturally, the PIC18F4520 implements an enhanced 16-bit instruction word with 8-bit data path, single-cycle hardware multiply, and a 32-level hardware stack. The internal oscillator and 4x PLL allow designs without an external crystal while still meeting timing requirements for 10 MIPS operation. nanoWatt technology provides dynamic clock switching and selective peripheral control for battery-friendly sleep currents. The device operates from 4.2V to 5.5V (extended temperature variant). Typical applications include industrial control boards, sensor signal conditioning front-ends, low-power motor control, USB-free legacy embedded systems (where the PIC18F4550 is preferred if USB is needed), HVAC thermostats, educational and prototyping platforms, and retrofits of PIC16F877A designs where higher performance and additional peripherals are required. The 44-QFN (ML) variant is preferred for compact, surface-mount assemblies where the larger 44-TQFP or 40-PDIP footprints are too tall or too large. Design tip: the 44-pin QFN (8x8 mm) has an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance - do not leave the e-pad floating. Provide adequate input bulk capacitance on VDD and AVdd to support ADC accuracy. Use the internal oscillator with PLL for cost-sensitive designs, but reserve an external crystal footprint if the application requires USB-grade clock accuracy or fail-safe clock monitor switching.

RFC Hubungi kami
PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip
PIC18F4520-E/P

PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip

The Microchip Technology PIC18F4520-E/P is an 8-bit RISC microcontroller based on the enhanced PIC18 architecture, delivering up to 10 MIPS performance at 3V in a 40-pin PDIP through-hole package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, with 36 digital I/O pins and a 13-channel 10-bit ADC. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash, SRAM, EEPROM), peripherals (ADC, timers, UART, SPI, I2C), and I/O on a single silicon die. Within the broader taxonomy, the PIC18F4520 belongs to: microcontroller -> 8-bit MCU -> enhanced Flash MCU -> RISC MCU -> embedded controller -> semiconductor IC. The PIC18F family is widely adopted for cost-sensitive, deterministic embedded designs and sits between the older PIC16 mid-range family and the 16-bit dsPIC/PIC24 families in Microchip's portfolio. Key features of the PIC18F4520 include a hardware 8x8 single-cycle multiplier, nanoWatt power management with multiple idle/sleep modes, a fail-safe clock monitor, and an internal 31 kHz to 8 MHz oscillator block with 4x PLL (for system clock up to 40 MHz). Four 16-bit timers/counters, two capture/compare/PWM modules, an enhanced USART, MSSP (SPI/I2C), and a parallel slave port round out the peripheral set. EUSART and PWMs are commonly used for motor and sensor interfacing. The architecture uses a 16-bit instruction word with an 8-bit data path, providing C-compiler-friendly RISC design while retaining the deterministic interrupt latency PIC MCUs are known for. The wide 4.2V to 5.5V operating range simplifies integration with 5V sensors and drivers, while 1.8V to 3.6V operation at reduced clock is supported for low-power designs. nanoWatt technology can drop supply current below 1 uA in sleep mode. Typical applications include industrial control panels, HVAC thermostats, motor control (BLDC/fan/pump), low-end embedded data acquisition, smart metering, automotive body electronics, and USB-to-UART bridges when paired with an external PHY. The 40-pin PDIP footprint remains popular for through-hole prototype boards, educational platforms, and replacement of legacy 8051 designs. When designing with this part, choose the industrial temperature grade (-40C to +125C) for outdoor/automotive use; the E suffix here denotes the extended temperature range. Ensure decoupling capacitors are placed within 5 mm of the VDD/VSS pins and verify oscillator start-up time under your load conditions before locking the BOM. This page synthesizes distributor pricing as of 2026-09-27, drop-in DIP-40 alternatives, and practical design notes that complement the manufacturer datasheet for engineers evaluating legacy PIC18 designs.

RFC Hubungi kami
PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip
PIC18F4520-E/PT

PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip

The Microchip Technology PIC18F4520-E/PT is an 8-bit RISC microcontroller from the PIC18 family featuring a 32KB Flash program memory, 1536 bytes of SRAM, 256 bytes of EEPROM, and a maximum CPU clock speed of 40 MHz (10 MIPS), housed in a 44-pin TQFP (PT) surface-mount package. It integrates 36 digital I/O pins, thirteen 10-bit ADC channels, two CCP/PWM modules, four timers, two analog comparators, and a USART with an enhanced addressable USART for robust serial communications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM/EEPROM), and a fixed set of peripherals onto one silicon die. 8-bit MCUs sit under the broader category of microcontrollers, which in turn belong to the embedded computing and semiconductor taxonomy. The PIC18 family's RISC architecture executes most instructions in a single 200 ns cycle (4 clock periods at 40 MHz), giving it deterministic timing for control loops. The 10-bit ADC allows direct sensing of analog signals (temperature, current, voltage), while the nanoWatt power-management modes extend battery life in always-on designs. Key differentiators include the Enhanced Flash program memory (In-Circuit Serial Programming via two pins, allowing firmware update without removing the chip), 100K erase/write cycle endurance on the Flash, and an industrial-grade -40C to +125C operating temperature range ("E" temperature suffix). Hardware peripherals such as the Parallel Slave Port enable high-throughput memory-mapped transfers to external devices, while the Master Synchronous Serial Port (MSSP) module supports SPI and I2C interfaces. The integrated 10-bit ADC can reach 100K samples per second, suitable for closed-loop control in motor and power-conversion applications. Typical applications include industrial automation and process control, automotive body and accessory ECUs, HVAC controller boards, sensor signal conditioning front ends, and consumer appliances requiring cost-sensitive 8-bit control with on-chip peripherals. The 5V native I/O also makes the part well suited to legacy 5V system designs. When designing with this device, evaluate vectored interrupt latency and register-bank switching overhead - these architectural choices favor bit-manipulation and GPIO-heavy code, with weaker fit for large arithmetic or DSP workloads. This page synthesizes distributor pricing, drop-in alternatives, and application guidance beyond the manufacturer datasheet.

RFC Hubungi kami
PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40
PIC18F4520-I/P

PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40

The Microchip Technology PIC18F4520-I/P is a high-performance 8-bit PIC18 microcontroller featuring 32KB (16K x 16) of Flash program memory, 1.5KB RAM, and 256 bytes of EEPROM, operating at up to 40 MHz (10 MIPS) in a 40-pin PDIP through-hole package. The integrated peripherals include a 10-bit Analog-to-Digital Converter (ADC) with up to 13 channels, a USART, an MSSP supporting SPI and I2C, two comparators, capture/compare/PWM modules, and nanoWatt power-management technology for low-power applications. An 8-bit microcontroller (MCU) is a small computing device built around a CPU with an 8-bit data path, integrated Flash program memory, RAM, and a fixed set of peripherals. The PIC18 family is Microchip's enhanced mid-range line, sitting between the baseline PIC10/12/16 series and the 16-bit dsPIC/PIC24 families. PIC18 MCUs are widely deployed in industrial control, consumer electronics, automotive subsystems, and educational platforms because of their deterministic RISC architecture, low cost, and the mature MPLAB X toolchain. Key features of the PIC18F4520-I/P include 36 digital I/O pins, four timer modules (one 8-bit and three 16-bit), two capture/compare/PWM (CCP) modules plus one enhanced CCP (ECCP), an internal 31 kHz-8 MHz oscillator with 4x PLL, Fail-Safe Clock Monitor, and a separate Watchdog Timer with its own RC oscillator. The 40-pin PDIP package simplifies prototyping and breadboard-based designs. Operating voltage spans 4.2 V to 5.5 V, and the industrial temperature grade extends from -40C to +85C. Internally, the device uses a C-compiler-optimized RISC architecture with a hardware 8x8 single-cycle multiplier, a non-multiplexed 16-bit program bus, and a 16-bit instruction word. nanoWatt technology adds multiple idle/sleep modes, ultra-low-power wake-on-interrupt, and a real-time clock using Timer1, enabling battery-friendly designs where average current draw can drop into the microamp range. The Fail-Safe Clock Monitor provides automatic clock-source backup in safety-critical applications. Typical applications include industrial control panels, sensor interface nodes, motor-control front ends (with ECCP for PWM), USB-to-serial bridges (using a USART plus external converter), home appliance user interfaces, and low-cost data-acquisition front ends that benefit from the 10-bit ADC. Hobbyists and educators also rely on the PIC18F4520 as a teaching vehicle because of its breadboard-friendly DIP form factor and abundant example code. When designing with this device, ensure the oscillator configuration bits match the chosen clock source and that decoupling capacitors (100 nF plus a bulk 10 uF) are placed within 5 mm of the supply pins. For low-power designs, verify the ADC acquisition time and avoid leaving analog inputs floating; unused digital I/O should be configured as outputs low to minimize transient current. This page synthesizes distributor pricing as of 2026-09-27, drop-in PIC18 alternatives in the same 40-pin PDIP footprint, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

RFC Hubungi kami