Mikropengawal

Produk (20,000+)

ATSAME53J20A-AFT - 120MHz ARM M4F MCU, 1MB Flash | Microchip
ATSAME53J20A-AFT

ATSAME53J20A-AFT - 120MHz ARM M4F MCU, 1MB Flash | Microchip

The Microchip ATSAME53J20A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 high-performance family, running up to 120 MHz with a single-precision Floating Point Unit (FPU). It integrates 1 MB of Dual-Panel Flash with ECC and 256 KB of SRAM with ECC, packaged in a 64-pin TQFP (10x10 mm). The device is supplied in Tape & Reel (-AFT suffix) form for high-volume assembly. An ARM Cortex-M4F microcontroller is a 32-bit processor core that combines the energy efficiency of the Cortex-M architecture with DSP extensions and a hardware single-precision floating-point unit. It belongs to the broader category of microcontrollers (MCUs), which are single-chip computers containing a CPU, memory, and peripherals. Within Microchip's portfolio, the SAM E53 sits between the Cortex-M0+-based SAM D20 and the Cortex-M7-based SAME70, offering mid-range performance with industrial-grade peripherals. Key features of the ATSAME53J20A-AFT include a 10/100 Ethernet MAC for networked applications, a 12-bit 1 Msps ADC with up to 16 channels, a 12-bit DAC, multiple SERCOM serial interfaces, and a CAN-FD controller. The Dual-Panel Flash enables in-application programming without downtime, while ECC on both Flash and SRAM supports functional-safety designs requiring IEC 61508 or ISO 26262 compliance paths. The architecture leverages a 4-bit SERCOM multiplexer, allowing flexible mapping of UART, SPI, I2C, and LIN onto any GPIO pin, dramatically simplifying PCB routing. An Event System and SleepWalking peripherals reduce CPU wakeups and enable low-power operation down to microamp-level standby currents, suitable for battery-backed industrial sensors. Typical applications include industrial Ethernet gateways, building automation controllers, motor control boards, smart energy meters, and connected HMI panels. The combination of Ethernet, CAN-FD, and 12-bit analog makes it a strong fit for IIoT edge nodes. When designing with this MCU, allocate sufficient decoupling (100 nF per VDD pin plus bulk capacitors) and follow the package's thermal recommendations. Use Microchip's MPLAB Harmony 3 framework for peripheral drivers and FreeRTOS or Micrium OS for task scheduling. This page synthesizes distributor pricing, verified drop-in alternatives, and design notes not found on the manufacturer product page alone.

RFC Hubungi kami
ATSAME53J20A-AU-EFP - 120MHz Cortex-M4F 1MB Flash MCU | Microchip
ATSAME53J20A-AU-EFP

ATSAME53J20A-AU-EFP - 120MHz Cortex-M4F 1MB Flash MCU | Microchip

The Microchip Technology ATSAME53J20A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family running up to 120 MHz, with 1 MB of dual-panel Flash with ECC, 256 KB of SRAM with ECC, integrated 10/100 Ethernet MAC, USB 2.0 Full-Speed, and a CAN-FD controller, housed in a 64-pin TQFP (10x10 mm) industrial-temperature-grade package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. Within the broader hierarchy, the ATSAME53J20A belongs to the Cortex-M4F class of microcontrollers -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The Cortex-M4F adds a single-precision floating-point unit (FPU) and DSP extensions over the base Cortex-M4, enabling efficient signal-processing workloads. Key features include 120 MHz core speed with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, 51 programmable I/O pins, a 10/100 Ethernet MAC, USB 2.0 Full-Speed Host/Device, two CAN-FD controllers, two I2C, four SERCOM-configurable UART/SPI/I2C, a 12-bit 1 Msps ADC, and multiple 16-bit timers. The device supports 1.62V to 3.6V core supply, industrial -40C to +85C operation, and offers cryptographic accelerators (AES, TRNG). Architecturally, the SAM E53 combines an advanced Flash controller with prefetch/cache for deterministic execution, an integrated high-speed bus matrix for low-latency peripheral access, and a low-power architecture with multiple sleep modes. The Ethernet MAC includes IEEE 1588 timestamping, making it suitable for industrial Ethernet protocols. Hardware cryptographic accelerators offload AES and TRNG operations, reducing CPU load. Typical applications include industrial Ethernet gateways, Building Automation BACnet/Modbus nodes, smart energy metering, USB-CAN bridges, IoT edge devices with Ethernet connectivity, factory automation PLCs, motor control, and human-machine interface (HMI) panels. The combination of Ethernet + USB + CAN-FD makes it ideal for protocol-conversion bridges in industrial 4.0 deployments. When designing with this device, plan for a stable 3.3V supply rail with adequate decoupling (100 nF + 4.7 uF near each VDD pin). The Ethernet MAC requires an external PHY and 49.9 ohm 1% termination resistors on the differential pairs routed as 100-ohm differential impedance. Configure unused I/O as analog inputs with pulled-up enables to minimize leakage and EMI. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including same-family variants with different package/flash sizes and verified parametric compatibility for direct second-source qualification.

RFC Hubungi kami
ATSAME53J20A-AUT - 120MHz Cortex-M4F 1MB Flash MCU | Microchip
ATSAME53J20A-AUT

ATSAME53J20A-AUT - 120MHz Cortex-M4F 1MB Flash MCU | Microchip

The Microchip Technology ATSAME53J20A-AUT is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, integrating up to 1 MB of dual-panel Flash with ECC, up to 256 KB of SRAM with ECC, and a 10/100 Ethernet MAC, all in a 64-pin TQFP (10x10 mm) automotive-grade package rated for -40C to +85C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one package. The Cortex-M4F architecture extends the ARM Cortex-M4 instruction set with a single-precision Floating Point Unit (FPU) and DSP extensions, making it well suited to mixed control-and-signal-processing tasks. SAM E5x MCUs belong to the broader category of 32-bit embedded microcontrollers and sit within Microchip's SAM family, which in turn belongs to the wider power management and embedded computing hierarchy of semiconductor devices. Key features include a 120 MHz maximum CPU clock, 1 MB of Flash, 256 KB of SRAM, a 12-bit ADC with up to 16 channels, multiple SERCOM interfaces (configurable as UART/SPI/I2C), an Ethernet MAC, a CAN-FD controller, a Full-Speed USB with on-chip transceiver, and a 32-bit hardware crypto accelerator (TRNG, AES, SHA). The device operates from 1.71V to 3.6V supply and offers multiple low-power sleep modes with RTC retention, enabling battery-friendly IoT designs. Internally, the SAM E53 uses a 4-bit prefetch buffer, single-cycle hardware multiply, and a tightly-coupled SRAM block for deterministic interrupt latency. ECC on Flash and SRAM protects against single-bit soft errors, which is important for industrial and automotive designs. The 1 MB dual-panel Flash enables in-place firmware updates without halting code execution in the inactive panel. Typical applications include industrial automation controllers, building automation gateways, automotive body and chassis ECUs, IoT edge nodes with Ethernet, human-machine interfaces (HMI), and smart energy metering. The Ethernet MAC plus CAN-FD combination is particularly attractive for industrial protocol bridging. When designing with this device, note that the 64-pin TQFP variant does not expose the full bus (no external memory bus), so projects needing SDRAM or parallel displays should consider the 100-pin or 128-pin SAM E5x parts. Decoupling requires at least one 100 nF X7R capacitor per VDD pin plus a bulk 4.7 uF on the main regulator output. This page synthesizes distributor pricing, AEC-Q100-qualified same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, giving procurement engineers and firmware developers a single source for cross-reference and design decisions.

RFC Hubungi kami
ATSAME53J20A-AUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, 64-TQFP
ATSAME53J20A-AUT-EFP

ATSAME53J20A-AUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, 64-TQFP

The Microchip ATSAME53J20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision FPU, 1 MB Dual-Panel Flash with ECC, and 256 KB SRAM with ECC, housed in a 64-pin TQFP (10x10 mm) package. The -EFP suffix denotes Extended Flash Performance silicon, automotive-grade qualification, and Tape & Reel packaging. The device integrates a 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip PHY, and a rich peripheral set aimed at connected industrial and automotive nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a configurable set of on-chip peripherals. The SAM E53 sits within Microchip's SAM D5x/E5x family, the Cortex-M4F class of which represents the mid-to-high tier of Cortex-M microcontrollers, offering DSP extensions and an FPU for sensor fusion and control loops. Below this tier are Cortex-M0+ parts (e.g., SAMD21) for low-power tasks, and above are Cortex-M7 (SAME70) for high-throughput DSP. Key features of the ATSAME53J20A include 1 MB Flash with RWW (read-while-write) partitioning, 256 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, four SERCOM (configurable serial) interfaces supporting I2C/SPI/UART, an I2S interface for audio, a 10/100 Ethernet MAC with 1588 PTP timestamping, USB 2.0 Full-Speed device/host, and a CAN-FD controller. The EFP variant provides extended flash endurance and retention specifications suited for long-lifecycle applications. The architecture pairs a Cortex-M4F core with a 7-channel peripheral event system, low-power SleepWalking peripherals, and a 32-bit real-time clock, enabling deterministic interrupt response and energy-efficient always-on sensing. The Ethernet MAC combined with on-chip PHY-ready I/O supports industrial protocols such as EtherCAT, PROFINET, and Modbus TCP via offloaded stacks. Typical applications include industrial Ethernet gateways, building automation controllers, automotive body and telematics ECUs, USB-C PD controller boards, and connected sensor hubs. The wide operating temperature range and automotive qualification support AEC-Q100 deployment in cabin electronics and ADAS sensor pre-processing. When designing with this device, allocate a 4-layer PCB with a continuous ground pour beneath the TQFP for thermal dissipation, and place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pads to maintain RTC accuracy. The EFP silicon grade requires firmware aware of the extended flash ECC table at boot; reference Microchip application note DS40001953 for migration notes from the standard -AUT variant. This page synthesizes cross-distributor pricing, parametric drop-in alternatives, and PCB layout guidance not found in a single source - curated to help engineers confirm sourcing and accelerate board bring-up.

RFC Hubungi kami
ATSAME53J20A-MU - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN
ATSAME53J20A-MU

ATSAME53J20A-MU - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN

The Microchip ATSAME53J20A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. It targets the SAM E53 high-performance MCU family and integrates a 10/100 Ethernet MAC, a high-speed USB 2.0 Full-Speed device/host with PHY, a CAN-FD controller, and a 12-bit 1 Msps ADC, making it suitable for connected industrial and IoT edge nodes. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers, GPIO). MCUs are the hypernym ancestors of SoCs and embedded processors in the semiconductor hierarchy, sitting below microprocessors in compute complexity but dominating in deterministic, low-power, real-time applications. The Cortex-M4F class specifically adds an FPU and DSP extensions, allowing single-cycle MAC operations and efficient signal processing. Key features of the ATSAME53J20A-MU include 120 MHz core clock with FPU, 1 MB dual-panel Flash with ECC for robust in-field firmware updates, 256 KB SRAM with ECC, a 12-bit 1 Msps ADC with up to 16 channels, and hardware crypto accelerators (AES, SHA, TRNG). The 64-pin VQFN (9x9 mm) package exposes extensive GPIO while maintaining a compact footprint for space-constrained designs. Operating voltage spans 1.62 V to 3.6 V, with industrial -40C to +85C temperature grade. Architecturally, the device uses a Cortex-M4F core coupled to a multi-layer AHB/APB bus matrix that allows concurrent peripheral DMA and CPU execution. The dual-panel Flash supports read-while-write, enabling live firmware updates without halting execution. Integrated SERCOM (serial communication) instances can each be configured as USART, I2C, or SPI, giving designers up to 8 flexible serial ports. Typical applications include industrial Ethernet gateways, USB-to-UART bridges, CAN-FD automotive body controllers, smart energy metering, and HMI touch panels. The combination of FPU and DSP instructions also suits audio DSP pre-processing, motor-control commutation loops, and predictive maintenance sensor fusion. When designing with the ATSAME53J20A-MU, allocate adequate copper pour under the exposed pad for thermal dissipation (max dissipation around 1.5 W in 64-VQFN). Use the integrated SERCOM channels instead of dedicated peripherals where possible to free up pin assignments for application I/O. Decouple VDDIO and VDDCORE pins with 100 nF X7R ceramic capacitors placed within 3 mm of each pin pair. This page synthesizes distributor pricing, drop-in alternatives from the same Microchip SAM E5x family, and practical PCB layout notes not consolidated in the manufacturer datasheet.

RFC Hubungi kami
ATSAME53J20A-MU-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME53J20A-MU-EFP

ATSAME53J20A-MU-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAME53J20A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, delivering up to 120 MHz core clock with single-precision FPU, 1 MB dual-panel Flash with ECC, and 256 KB SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. The "EFP" suffix denotes the Extended Flash Performance / industrial temperature grade variant with tray packaging. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory, and programmable peripherals on a single die. The Cortex-M4F architecture used here is a 32-bit Harvard-bus core with DSP extensions and a hardware single-precision floating-point unit, widely adopted in industrial, IoT, and audio applications. The SAM E53 sits in Microchip's high-performance MCU portfolio above the SAMD51/SAM D5x line and below the Cortex-M7 SAM S70/E70 family. Key features include a 120 MHz maximum CPU clock, 1 MB dual-panel Flash with ECC for safety-critical code storage, 256 KB SRAM with ECC, and an integrated 10/100 Ethernet MAC supporting IEEE 1588 PTP timestamping. The device also integrates a High-Speed USB 2.0 PHY (480 Mbps), a Host/Device/OTG controller, an I2S/serial audio interface, a 12-bit 1 MSPS ADC, and SERCOM peripherals configurable as UART/SPI/I2C. Architecturally, the SAM E53 uses a 5-stage pipeline Cortex-M4F core with a single-precision FPU, MPU, and CoreSight debug, plus a multi-layer bus matrix with 32 DMA channels for peripheral-to-memory transfers without CPU intervention. The dual-panel Flash allows simultaneous read-while-write operation, simplifying firmware OTA updates and live EEPROM emulation. Integrated hardware crypto accelerators (AES, SHA, RSA) support secure boot and TLS applications. Typical applications include industrial Ethernet gateways (EtherCAT, PROFINET slaves), HVAC controllers, building automation, USB-C audio interfaces, smart energy metering, IoT edge nodes with TLS, and human-machine interface (HMI) panels. The integrated Ethernet MAC eliminates the need for an external PHY-less MAC interface, reducing BOM cost. When designing with this device, allocate at least four PCB layers for proper ground isolation between the analog and digital sections, place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pins, and provide bulk decoupling of 100 nF + 4.7 µF per VDD pin pair to meet the 1.7-3.6 V operating range. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, optimized for engineers evaluating Cortex-M4F MCU options for connected industrial and audio products.

RFC Hubungi kami
ATSAME53J20A-MUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME53J20A-MUT

ATSAME53J20A-MUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME53J20A-MUT is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. The part integrates a Floating Point Unit (FPU) and is a member of the SAM E53 high-performance microcontroller series, which targets connected industrial, IoT gateway, and graphical HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage and SRAM for runtime data), and a rich set of peripheral interfaces (GPIO, timers, communication buses, ADCs). The Cortex-M4F architecture adds a hardware single-precision Floating Point Unit to the ARMv7-M profile, accelerating DSP and control-loop math; at 120 MHz the SAM E53 reaches 150 DMIPS and 273 CoreMark. The 1 MB dual-panel Flash allows simultaneous read-while-write, enabling live firmware updates without halting code execution, while ECC on both Flash and SRAM is critical for safety-relevant applications in industrial and automotive environments. Key features include the SAM E53 peripheral set: a 10/100 Ethernet MAC for networked devices, a high-speed USB 2.0 Full-Speed device/host interface, a TFT LCD controller with 2D graphics accelerator, a 12-bit 1 Msps ADC, two 12-bit DACs, multiple SERCOM serial interfaces (configurable as UART/SPI/I2C), an I2S interface for digital audio, and up to 51 GPIO. The 120 MHz Cortex-M4F core delivers deterministic real-time performance while the on-chip FPU and DSP extensions enable sensor fusion and motor-control algorithms without an external DSP. Typical applications include industrial IoT gateways with Ethernet connectivity, building automation controllers, graphical HMI panels with TFT displays, connected sensor hubs, motor-control BLDC drives, and USB peripheral devices. The combination of Ethernet MAC, USB, and LCD controller makes the SAM E53 one of the few Cortex-M4F MCUs that can host a full-color touchscreen HMI plus industrial fieldbus in a single chip. When designing with the ATSAME53J20A-MUT, plan a 4-layer PCB with a solid ground pour beneath the 9x9 VQFN exposed pad; the EP must be soldered to a 4x4 thermal via array to meet the 85C industrial temperature spec. Decouple VDDIO and VDDIN with a 100 nF X7R per pin plus a bulk 4.7 uF tantalum, and keep the 12 MHz external crystal within 5 mm of the XIN/XOUT pins to avoid jitter on the Ethernet PHY clock. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAME53J20A-MUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, USB+Ethernet, 64-VQFN
ATSAME53J20A-MUT-EFP

ATSAME53J20A-MUT-EFP - 120MHz Cortex-M4F MCU, 1MB Flash, USB+Ethernet, 64-VQFN

The Microchip Technology ATSAME53J20A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 high-performance family, integrating up to 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC in a 64-pin VQFN (9x9 mm) package. The ARM Cortex-M4F core runs up to 120 MHz and includes an integrated single-precision Floating Point Unit (FPU) plus DSP extensions, while a dedicated 10/100 Mbps Ethernet MAC, full-speed USB 2.0 controller, and a 12-bit 1 Msps ADC extend its peripheral set. The "-EFP" suffix denotes the Extended Flash Performance (10k endurance / 85C grade) tape-and-reel packaging variant ordered today via major distributors. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), programmable peripherals, and I/O. The Cortex-M4F variant adds a single-precision IEEE-754 FPU for floating-point workloads and DSP-style MAC instructions. SAM E53 MCUs target industrial automation, consumer HMI, and connected-edge nodes where deterministic real-time performance plus communications (Ethernet/USB/CAN) and analog integration are required. Key features include: Cortex-M4F @ 120 MHz with FPU and DSP extensions; 1 MB Flash / 256 KB SRAM (both with ECC); integrated 10/100 Ethernet MAC with IEEE 1588 PTP hardware assist; USB 2.0 Full-Speed Device/Host + PHY; up to 4 SERCOM for I2C/SPI/UART; 12-bit 1 Msps ADC, 10-bit DAC, analog comparators; 1.62V to 3.6V VDD core; 6-channel DMA, Event System, dual CAN-FD controllers; and crypto accelerators for AES, SHA, and true random number generation. The Cortex-M4F core delivers 1.5 DMIPS/MHz and integrated DSP, with on-chip FPU accelerating sensor-fusion and motor-control math. The architecture pairs an AHB bus matrix with multiple SERCOM channels, a high-speed USB peripheral block with on-chip PHY, the Ethernet MAC with associated GMII/RGMII interface logic, and a Cortex-M4F core with FPU. ECC on Flash and SRAM increases reliability in industrial environments. The peripheral Event System allows peripherals to trigger one another without CPU intervention, freeing clock cycles for application code. Typical applications include: industrial control (PLC modules, motor drives), IoT edge nodes with Ethernet or USB connectivity, HMI displays with touch, building automation gateways, and connected medical devices. The Ethernet MAC plus CAN-FD pairs well with industrial networking; the USB and SD card interfaces suit consumer data loggers. When designing, factor in that the Ethernet and USB signal-integrity layouts require impedance-controlled traces, the 64-pin VQFN has an exposed pad that must be soldered for thermal/ground continuity, and external crystal selection (24 MHz HSE / 32.768 kHz) is critical to USB accuracy and CAN-FD timing tolerance. This page synthesizes verified distributor pricing, same-family (and cross-brand) drop-in alternatives, and practical VQFN layout/design notes not found in the manufacturer datasheet alone, supporting faster board bring-up.

RFC Hubungi kami
ATSAME53N19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAME53N19A-AFT

ATSAME53N19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAME53N19A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, delivering up to 120 MHz core clock, 512 KB of Flash, and 100-pin TQFP (14x14 mm) packaging with tape-and-reel delivery. It integrates a Floating Point Unit (FPU), a 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip PHY, and a high-speed 12-bit ADC, positioning it as a high-performance general-purpose MCU for connected embedded designs. An ARM Cortex-M4F microcontroller is a 32-bit RISC processor core featuring single-precision floating-point hardware acceleration, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). It belongs to the ARM Cortex-M family (hypernym hierarchy: Cortex-M4F -> Cortex-M4 -> Cortex-M -> ARM processor core -> RISC microprocessor). The Cortex-M4F is widely adopted in mixed-signal embedded systems where deterministic real-time control, math-intensive DSP, and low-power operation coexist. Key features of the ATSAME53N19A-AFT include 512 KB of Flash with ECC, 192 KB of SRAM with ECC, a 120 MHz maximum CPU clock, integrated 10/100 Mbps Ethernet MAC, USB 2.0 Full-Speed device/host with on-chip transceiver, a 12-bit 1 MSPS ADC, multiple SERCOM interfaces, and a wide operating voltage range of 1.71V to 3.6V. The integrated FPU accelerates floating-point math, while the dual-panel Flash with ECC supports in-field firmware upgrades with built-in error correction for safety-critical applications. The SAM E53 architecture combines deterministic Cortex-M4F performance with rich connectivity peripherals - Ethernet MAC, USB, CAN-FD, and multiple SERCOM channels - reducing BOM cost by eliminating external PHY or interface ICs. The Dual-Panel Flash with ECC supports Over-the-Air firmware update patterns commonly used in IoT and industrial gateways, while the SRAM with ECC enhances reliability in electrically noisy environments such as motor drives and factory automation. Typical applications include industrial Ethernet gateways, IoT edge nodes with USB connectivity, building automation controllers, motor control subsystems, and connected sensor hubs. The combination of Ethernet MAC and USB on a Cortex-M4F core enables single-MCU designs that previously required a companion network processor. When designing with this part, ensure the TQFP-100 PCB layout uses thermal vias under the exposed pad for heat spreading at high CPU loads. The internal voltage regulator requires a 1 uF + 100 nF decoupling network on the VCORE pin and the PLL loop filter components must follow the manufacturer reference layout to achieve the rated 120 MHz operation. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes not found in the bare manufacturer datasheet.

RFC Hubungi kami
ATSAME53N19A-AU - 120MHz ARM Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME53N19A-AU

ATSAME53N19A-AU - 120MHz ARM Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME53N19A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 512 KB Flash and 192 KB SRAM in a 100-pin TQFP (14x14 mm) package. Part of the SAM E53 family, it integrates a Floating Point Unit (FPU), 1 MB Dual Panel Flash with ECC support, hardware AES, and a 10/100 Ethernet MAC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication controllers). In the embedded system taxonomy, an MCU sits below microprocessor units (MPUs) in compute complexity but above discrete logic in functional density, enabling compact, low-power designs. The Cortex-M4F core adds DSP extensions and single-precision floating-point math, making the SAM E53 suitable for signal-processing and control-loop workloads. Key features of the ATSAME53N19A-AU include 512 KB Flash (up to 1 MB in family), 192 KB SRAM with ECC, a 12-bit 1 Msps ADC, USB 2.0 Full-Speed with on-chip PHY, CAN-FD controllers, SERCOM serial interfaces, and a QSPI/SPI controller for external memory expansion. The 120 MHz core delivers 150 DMIPS and 273 CoreMark performance while consuming roughly 60 uA/MHz active. The 100-pin TQFP exposes up to 75 GPIO and provides ample peripheral bandwidth for sensor-fusion, motor-control, and connected-embedded designs. Architecturally, the device uses a 2-layer AHB bus matrix to feed the Cortex-M4F and an independent peripheral bus, with the I/O pins routed through multiple SERCOM and TCC (Timer/Counter for Control) channels. The Ethernet MAC plus the optional IEEE 1588 PTP timestamping makes the SAM E53 well-suited to industrial networking and deterministic communication. Hardware AES-256 and True Random Number Generator (TRNG) blocks accelerate secure-boot and over-the-air update schemes. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet or CAN-FD connectivity, building-automation gateways, USB Human-Interface Devices (HIDs), and motor-control inverters. The wide 3.0-3.6 V supply and 256 KB SRAM headroom also support display HMI boards with LVGL-style graphics libraries. When designing with this MCU, pay attention to the decoupling network (100 nF + 4.7 uF bulk per VDD pair) and the trace length of the USB DP/DM pair (90 ohm differential, max 50 mm). Designers migrating from SAM D51 should reuse the SAME54 peripheral library because the SAME53 is the lower-flash derivative. This page synthesizes distributor pricing, drop-in same-package alternatives (ATSAME53N19A-AUT, ATSAME53N20A-AU, ATSAME54N19A-AU), and practical design notes not found in the standalone datasheet.

RFC Hubungi kami
ATSAME53N19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, TQFP-100
ATSAME53N19A-AUT-EFP

ATSAME53N19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, TQFP-100

The Microchip Technology ATSAME53N19A-AUT-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, running up to 120 MHz with a single-precision Floating Point Unit (FPU). It integrates 512 KB of Dual Panel Flash with ECC, 192 KB of SRAM, and a full set of high-speed connectivity peripherals, all packaged in a 100-pin TQFP (14x14 mm) footprint. This variant is qualified for the automotive temperature grade and features Microchip's Extended Flash Performance (EFP) and tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (SRAM), and on-chip peripherals such as timers, ADC, DAC, communication interfaces, and GPIO. The ARM Cortex-M4F belongs to the Cortex-M family of processors designed for deterministic, low-power embedded applications; the 'F' suffix indicates an integrated FPU for hardware-accelerated single-precision floating-point math. The SAM E53 sits within Microchip's SAM family (Smart ARM Microcontroller), targeting industrial automation, automotive body and gateway modules, IoT edge nodes, and human-machine interface applications requiring both DSP-class math and rich connectivity. Key features include a 120 MHz Cortex-M4F core with FPU, 512 KB Dual Panel Flash with ECC for in-application reprogramming, up to 256 KB SRAM, a high-speed USB 2.0 Full-Speed device/host, 10/100 Mbps Ethernet MAC with IEEE 1588 support, a 12-bit 1 Msps ADC, two 12-bit DACs, multiple SERCOM (serial communication) instances configurable as UART/SPI/I2C, an on-chip cryptographic accelerator, and a 16-channel Event System for hardware-triggered peripheral linking without CPU intervention. Technically, the device uses Microchip's proprietary on-chip interconnect and a 5-stage pipelined Cortex-M4F with single-cycle MAC and hardware divide. The Dual Panel Flash architecture allows one bank to execute code while the other is being reprogrammed, enabling firmware updates over-the-air (FOTA) without system downtime. ECC on Flash and SRAM provides single-bit error correction and double-bit detection, which is essential for safety-critical and long-life automotive deployments. Typical applications include industrial PLC I/O modules, automotive gateway controllers and body electronics, IoT edge sensor hubs with Ethernet, building-automation controllers, and USB-connected embedded user interfaces. The combination of Ethernet, USB, CAN-FD, and hardware crypto makes the SAM E53 especially well-suited to connected industrial nodes requiring deterministic real-time behavior. When designing with this device, allocate careful attention to decoupling: place 100 nF X7R capacitors adjacent to every VDD/VDDIO pin pair and a bulk 4.7-10 uF on each supply rail. For Ethernet, follow the IEEE 802.3 reference schematic in the SAM E53 datasheet to maintain signal-integrity margin on the MDI traces. Always configure the brown-out detector (BOD) and watchdog timer for unattended industrial deployments. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
ATSAME53N20A-AF - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME53N20A-AF

ATSAME53N20A-AF - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip ATSAME53N20A-AF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision Floating Point Unit (FPU), integrating 1 MB of Dual-Panel Flash with ECC and 256 KB of SRAM with ECC in a 100-pin TQFP (14x14 mm) package. It is a member of the SAM E53 high-performance family that combines connectivity (10/100 Ethernet MAC and USB), rich analog (12-bit ADC, DAC, analog comparators), and security/trust features for industrial and IoT gateway designs. An ARM Cortex-M4F microcontroller is a 32-bit processor core based on the ARMv7-M architecture, augmented with a single-precision FPU, DSP extensions, and a Memory Protection Unit (MPU). Microcontrollers sit below microprocessors in the embedded compute hierarchy: a microcontroller integrates CPU, non-volatile memory, RAM, and peripherals on a single die, while a microprocessor requires external memory and I/O controllers. The Cortex-M4F class targets deterministic real-time control with hardware floating-point acceleration, bridging the gap between 8/16-bit MCU efficiency and application-processor throughput. Key features of the ATSAME53N20A-AF include: up to 120 MHz core clock, 1 MB Dual-Panel Flash (allowing live firmware update with zero downtime), 256 KB SRAM, hardware AES and True Random Number Generator (TRNG) for security, a 12-bit 1 Msps ADC with up to 32 channels, two 12-bit DACs, and a high-speed USB 2.0 Full-Speed interface plus a 10/100 Mbps Ethernet MAC with IEEE 1588 PTP timestamping support. Operating voltage spans 2.7 V to 3.6 V with an extended industrial temperature range. Architecturally the device pairs the Cortex-M4F core with a multi-layer AHB/APB bus matrix, dual-bank Flash for safe over-the-air updates, and a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. The Dual-Panel Flash layout lets developers keep one panel in read mode while the other is reprogrammed, eliminating the boot-time gap that single-bank flash parts incur during firmware upgrades. The integrated Ethernet MAC plus USB and a SERCOM-based flexible serial engine (UART/SPI/I2C/RS-485) eliminates the need for external connectivity ICs in many gateway designs. Typical applications include industrial IoT gateways with Ethernet, building-automation controllers with secure remote firmware updates, USB-based human-machine interface (HMI) panels, motor-control and BLDC drives (using the PWM timers and analog comparators), and secure connected sensors with on-chip AES. The 100-pin TQFP package provides enough I/O for color TFT displays and multi-channel analog front ends. When designing with the ATSAME53N20A-AF, ensure your linker script reserves the upper flash panel for a bootloader and the lower panel for application code so you can leverage Dual-Panel Flash for fail-safe firmware updates. Use the on-chip 48 MHz DFLL with the 32.768 kHz crystal reference for jitter-sensitive USB Full-Speed and Ethernet timing, and place the decoupling network within 5 mm of every VDD pin.

RFC Hubungi kami
ATSAME53N20A-AU - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME53N20A-AU

ATSAME53N20A-AU - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME53N20A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit, 1 MB dual-panel Flash with ECC and 256 KB SRAM with ECC, in a 100-pin TQFP (14x14 mm) industrial-grade package. It targets connected industrial, automotive aftermarket and IoT gateway designs that demand deterministic real-time control plus on-chip Ethernet connectivity. A 32-bit microcontroller (MCU) is an integrated processor that combines an arithmetic logic unit, on-chip memory, and programmable peripherals around a single silicon die, forming the computational backbone of embedded systems. Within the broader hierarchy, MCUs sit below microprocessors in integration but above discrete logic in capability, and are categorized by core architecture (ARM Cortex-M, RISC-V, AVR, PIC), bit-width (8/16/32), and performance class (entry-level, mainstream, high-performance). The ATSAME53N20A-AU belongs to Microchip's high-performance SAM E5x family, distinguished by Cortex-M4F core plus advanced connectivity peripherals. Key differentiating features include a 10/100 Ethernet MAC with IEEE 1588 timestamp support, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DACs, multiple SERCOM (configurable serial communication) instances, a CAN-FD controller, and a cryptographic engine supporting AES, SHA and TRNG. The dual-panel Flash architecture enables live firmware updates without downtime, while SRAM and Flash ECC deliver single-bit correction and double-bit detection for safety-critical applications targeting IEC 61508 SIL 2. Architecturally, the SAM E53 leverages the Cortex-M4F core with DSP extensions and FPU, paired with a multi-layer AHB/APB bus matrix and a dedicated DMA controller that offloads peripheral transactions from the CPU. The 1 MB dual-bank Flash supports Read-While-Write operation, enabling simultaneous code execution and field upgrades via bootloader. Integrated voltage regulation simplifies single-supply 3.3 V designs, while the on-chip high-speed PLL scales an external 12 MHz crystal up to the 120 MHz system clock. Typical applications include industrial PLC I/O modules, building automation controllers, smart energy metering, HMI touch panels, and Ethernet-connected sensor hubs. The combination of Cortex-M4F DSP performance with hardware crypto and CAN-FD positions this MCU for Industry 4.0 edge nodes requiring both deterministic control and secure cloud connectivity. When designing with this device, allocate PCB area for the external 12 MHz crystal plus its load capacitors, and route the Ethernet differential pair (ETH_PHY) with 100-ohm differential impedance and ground stitching vias. Ensure VDDCORE decoupling uses a 1 uF X7R ceramic within 2 mm of the pin, and consider the SAM E53 heat dissipation profile when running continuous DSP workloads near 120 MHz. This page synthesizes distributor pricing across 11 channels, drop-in same-package alternatives from the SAM E5x/SAM D5x family, and practical design notes not consolidated in the manufacturer datasheet.

RFC Hubungi kami
ATSAME53N20A-AU-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-100
ATSAME53N20A-AU-EFP

ATSAME53N20A-AU-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-100

The Microchip Technology ATSAME53N20A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 high-performance family, running up to 120 MHz with single-precision FPU and DSP extensions, packaged in a 100-pin TQFP (14x14 mm). It integrates 1 MB Dual-Panel Flash with ECC, 256 KB SRAM with ECC, and a 10/100 Ethernet MAC, targeting connected industrial and IoT edge applications requiring deterministic real-time performance and on-board connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. Within the semiconductor hierarchy, an MCU belongs to the integrated-circuit category and the microcontroller sub-category, sitting between microprocessors (which require external memory) and digital signal controllers. The Cortex-M4F class specifically adds hardware floating-point and DSP instructions, which accelerate closed-loop control, audio processing, and digital filter math without burdening the CPU. Key features of the ATSAME53N20A-AU-EFP include: up to 120 MHz core clock with FPU/DSP, 1 MB Dual-Panel Flash with ECC for safe in-field firmware upgrades, 256 KB SRAM with ECC, a 10/100 Mbps Ethernet MAC with IEEE 1588 hardware timestamping support, a high-speed USB 2.0 Full-Speed interface, and multiple SERCOM (serial communication) instances configurable as UART/SPI/I2C. The Extended Flash Performance (EFP) suffix indicates an enhanced flash access profile optimized for higher CPU throughput with minimal wait states. Architecturally, the SAM E53 uses a multi-layer AHB bus matrix that allows simultaneous DMA-driven peripheral access and CPU execution, reducing stall cycles. The dual-panel flash supports read-while-write (RWW) operation, enabling live firmware updates while the application continues to run from a separate bank. Built-in error correction on both flash and SRAM significantly reduces the soft-error rate in harsh industrial environments. Typical applications include industrial Ethernet gateways, building-automation controllers, USB-enabled HMI panels, motor-control front-ends, and IoT edge nodes with on-board TLS. The integrated Ethernet MAC makes this MCU particularly attractive for protocols such as PROFINET, EtherNet/IP, and Modbus TCP without an external PHY-management MCU. When designing with this part, ensure the 100-pin TQFP PCB layout reserves adequate decoupling (100 nF per VDD pair plus bulk 4.7 uF) within 5 mm of the supply pins. Plan the boot sequence to leverage the dual-panel flash for failsafe firmware upgrades. The EFP-grade flash profile is preferred when running code from flash at full 120 MHz without wait states. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami
ATSAME53N20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip
ATSAME53N20A-AUT-EFP

ATSAME53N20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip

The Microchip ATSAME53N20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz, integrating 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC in a 100-pin TQFP (14x14 mm) package. The device is part of the SAM E53 family, which combines a high-performance Cortex-M4 core with FPU, a 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip transceiver, and CAN-FD peripherals. The -EFP suffix indicates the Extended Flash Performance variant shipped in Tape & Reel. A microcontroller (MCU) is a single-chip processor that integrates CPU, memory, and programmable peripherals on one die, enabling embedded control without external memory or logic devices. The Cortex-M4F core in the SAM E53 family is one step above Cortex-M3 cores in Microchip's SAM lineup, adding single-precision Floating Point Unit (FPU) hardware, DSP extensions, and tightly coupled peripherals for deterministic industrial communication. The SAM E53 sits within Microchip's power-managed MCU hierarchy: Cortex-M0+ (SAML/SAMC) -> Cortex-M4 (SAMD5x) -> Cortex-M4F with FPU (SAME5x) -> Cortex-M7 (SAMS70).

RFC Hubungi kami
ATSAME54N19A-AF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME54N19A-AF

ATSAME54N19A-AF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME54N19A-AF is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision FPU, integrating 512 KB dual-panel Flash with ECC and 192 KB SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) package. The SAM E54 family is part of Microchip's SAM D5x/E5x platform targeting industrial automation, automotive body/comfort, and connected IoT edge nodes. This specific -AF suffix variant is the automotive temperature grade (-40C to +125C), 100-pin TQFP, tray-packaged member. A Cortex-M4F microcontroller (MCU) is a 32-bit processor core licensed from Arm that combines the M4 instruction set with a hardware single-precision Floating Point Unit, an MPU for memory protection, and optional DSP extensions. It sits in the middle of the Arm Cortex-M family between the M3 (no FPU) and M7 (superscalar with double-precision FPU). Within the broader taxonomy: Cortex-M4F MCU -> 32-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. The SAM E54 specifically belongs to the Cortex-M4F-based high-performance tier with extensive connectivity peripherals. Key features include 120 MHz CPU clock, 512 KB Flash with error correction, 192 KB SRAM, full-speed USB 2.0 with on-chip PHY, dual CAN-FD controllers, Ethernet MAC (10/100), 10/100-Mbps I2S audio interface, SD/MMC host, and up to six SERCOM (serial communication) modules configurable as UART/SPI/I2C. The device also integrates a 12-bit 1 MSPS ADC, two 12-bit DACs, four analog comparators, and a high-speed Host/Client USB 2.0 port. An 8-channel Event System, 16-bit timers, and a TCC (Timer/Counter for Control) supporting motor-control PWM make it suitable for closed-loop control. The ATSAME54N19A-AF uses the Cortex-M4F core's branch prediction, single-cycle MAC, and SIMD instructions to deliver 150 Dhrystone MIPS and 1.25 DMIPS/MHz. The dual-panel Flash allows read-while-write (RWW) for safe firmware updates, and ECC on both Flash and SRAM mitigates soft-error risk in industrial and automotive environments. TrustZone-M is not present on this device (it is on the Cortex-M33 SAM L11/E11 families), but a separate secure boot and cryptographic accelerator (AES, SHA, TRNG) is integrated. Typical applications include industrial PLCs and HMIs, automotive body and comfort modules, smart metering, building automation gateways, motor control BLDC drivers, USB-connected medical peripherals, and Human-Machine Interface panels with TFT displays. The wide operating temperature range of -40C to +125C suits automotive and industrial enclosures. When designing with this device, pay attention to decoupling: place 100 nF X7R ceramics adjacent to every VDD pin pair and a bulk 4.7 uF on each main rail. The integrated Ethernet MAC requires an external PHY (e.g., KSZ8081) and 49.9 ohm 1% termination on the differential pair. Firmware should enable the watchdog timer and use the dual-panel Flash for A/B OTA updates. This page synthesizes distributor pricing, automotive-grade drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFC Hubungi kami
ATSAME54N19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME54N19A-AU

ATSAME54N19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME54N19A-AU is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, integrating a Floating Point Unit (FPU) and running at speeds up to 120 MHz. It provides 512 KB of dual-panel Flash memory with ECC and 192 KB of SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) industrial-grade package rated for -40C to +85C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The Cortex-M4F belongs to ARM's Cortex-M family of energy-efficient processors designed for embedded deterministic real-time control. Within the SAM E54 series, the ATSAME54N19A-AU sits in the Cortex-M4F -> Cortex-M -> 32-bit MCU -> embedded processor hierarchy, targeting industrial HMI, connectivity gateways, and audio processing applications. Key features include the Cortex-M4F core with single-precision FPU and DSP extensions, a high-speed on-chip 12-bit 1 Msps ADC, USB 2.0 Full-Speed with on-chip PHY, a 100 MHz system bus, multiple SERCOM channels configurable as UART/SPI/I2C, an I2S interface for digital audio, a 16-bit HSMCI for SD card storage, and a Crypto Accelerator (TRNG, AES, SHA). The 100-TQFP package provides ample I/O for parallel TFT displays and external memory buses. The SAM E54 architecture uses a multi-layer AHB bus matrix connecting the CPU, DMA controllers, and peripherals, allowing concurrent access with deterministic latency. The dual-panel Flash subsystem enables live firmware updates and EEPROM emulation, while the SRAM with ECC supports safety-critical applications where single-bit errors must be corrected automatically. Typical applications include industrial HMI panels with TFT displays, smart energy metering, IoT edge nodes with USB connectivity, digital audio streaming devices using I2S, and automotive aftermarket infotainment controllers. Designers value the on-chip FPU for sensor-fusion algorithms and the integrated crypto block for secure boot implementations. When designing with the ATSAME54N19A-AU, ensure 100 nF and 4.7 uF decoupling caps are placed near each VDD pin pair, and that the 12 MHz crystal or external clock meets the accuracy requirements specified in the SAM E54 datasheet. For USB applications, the DP/DM trace impedance must be tuned to 90 ohms differential.

RFC Hubungi kami
ATSAME54N19A-AU-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME54N19A-AU-EFP

ATSAME54N19A-AU-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME54N19A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, operating up to 120 MHz with 512 KB Flash and 192 KB SRAM in a 100-pin TQFP (14x14 mm) package. The integrated Floating Point Unit (FPU) and DSP extensions deliver high-performance signal processing while the dual-panel Flash with ECC provides reliable code storage for safety-critical applications. Key features include a 120 MHz Cortex-M4F core, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, full-speed USB 2.0 with integrated PHY, 10/100 Mbps Ethernet MAC with IEEE 1588 support, CAN-FD, and a 12-bit 1 MSPS ADC with up to 16 channels. Extended Flash Performance (-EFP) variant increases Flash endurance to 100k cycles and improves retention for industrial and automotive-grade deployments. The architecture integrates a 5-channel Direct Memory Access controller, Event System for hardware-triggered task chaining, and SERCOM peripherals configurable as UART, SPI, I2C, or LIN. The 14x14 TQFP-100 footprint provides ample GPIO for motor control, HMI, and multi-protocol gateway designs where pin count directly impacts board layout. Typical applications include industrial IoT gateways, motor control (BLDC/PMSM FOC), building automation controllers, USB peripherals with Ethernet bridging, and human-machine interfaces with TFT displays. The combination of CAN-FD, Ethernet, and USB makes the device a strong fit for connected industrial nodes where deterministic communication is required. When designing, ensure the trace impedance for USB and Ethernet is calculated per USB 2.0 and IEEE 802.3 specifications. The on-chip voltage regulator requires a 1uF X7R bypass capacitor close to VDDCORE; missing this capacitor results in unstable operation. Decouple each VDDIO group separately to minimize digital switching noise coupling into the analog ADC rails. This page consolidates distributor pricing for the ATSAME54N19A-AU-EFP, drop-in compatible ATSAME5x family members, and engineering guidance not found in the manufacturer datasheet alone.

RFC Hubungi kami
ATSAME54N19A-AUT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAME54N19A-AUT

ATSAME54N19A-AUT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAME54N19A-AUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family running up to 120 MHz with a single-precision floating point unit, packaged in a 100-pin TQFP (14x14 mm) and qualified for the automotive -40C to +85C temperature range. It integrates 512 KB of Flash with ECC and 256 KB of SRAM with ECC, providing robust memory integrity for safety-critical embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and configurable peripherals on one die. The Cortex-M4F core sits inside the ARM Cortex-M family, which targets deterministic real-time embedded control. The same-family members (SAM E51, SAM E53, SAM E54, SAMD51) share the Cortex-M4F architecture, peripheral set, and toolchain (Microchip Studio, MPLAB X, Harmony), allowing software portability across products that scale in flash, RAM, and pin count. Key features of the ATSAME54N19A-AUT include a 120 MHz Cortex-M4F core with DSP extensions, 512 KB dual-panel Flash, 256 KB SRAM, a high-speed 12-bit ADC up to 1 MSPS, USB 2.0 Full-Speed with embedded Host and Device, CAN-FD, multiple SERCOM, I2S, and a hardware cryptographic module. The automotive temperature grade (-40C to +85C) and the AUT suffix indicate conformance with Microchip's automotive qualification flow. The device uses a sophisticated bus matrix (AHB/APB) with separate code and system buses for deterministic DMA and interrupt latency, supporting both code execution from Flash with zero-wait-state via the FPU and efficient DSP filter operations. The dual-panel Flash architecture enables live firmware updates without downtime, while ECC on Flash and SRAM detects and corrects single-bit errors in mission-critical applications. Typical applications include automotive body and infotainment modules, industrial control panels, USB peripherals, CAN-FD gateways, motor control, and secure connected IoT nodes. Designers choose it when they need ARM Cortex-M4F DSP performance, automotive temperature range, USB and CAN-FD connectivity, and an integrated crypto accelerator in a 100-pin TQFP footprint. When laying out the PCB, dedicate at least one solid ground plane beneath the device, place the 0.1 uF VDD decoupling capacitors within 5 mm of each VDD pin, and reserve the SWD/SWC pins for programming. The 100-pin TQFP requires thermal vias under the die-attach pad; the pad is internally connected to ground but should still receive multiple stitching vias for stable operation at high ambient temperature. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet with engineering decision support.

RFC Hubungi kami
ATSAME54N20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AF

ATSAME54N20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip ATSAME54N20A-AF is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU). It integrates 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) extended-temperature package. According to the Microchip product page, the device targets industrial, automotive, and connectivity-rich embedded designs where deterministic real-time response and DSP-class arithmetic throughput are required. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. Within the embedded hierarchy, the ATSAME54N20A-AF sits at the high-performance ARM Cortex-M tier above Cortex-M0/M0+ entry-level MCUs and below Cortex-M7 application processors. The Cortex-M4F specifically adds DSP extensions and an FPU, enabling on-chip signal-processing without an external DSP coprocessor. Key differentiating features include a 120 MHz CPU with FPU, 1 MB dual-panel Flash allowing live firmware updates, 256 KB SRAM, full-speed USB 2.0 with integrated PHY, 10/100 Mbps Ethernet MAC with IEEE 1588 support, CAN-FD, multiple SERCOM configurable serial interfaces, a 12-bit 1 Msps ADC, DACs, and a hardware crypto block. The SAM E54 also exposes a Parallel Capture Controller (PCC) for camera and display interfaces, making it suitable for vision and HMI subsystems. Architecturally, the SAM E54 uses a bus matrix with separate AHB/APB domains giving the Cortex-M4F core simultaneous access to Flash, SRAM, and peripherals via the multi-port SRAM controller. The dual-panel Flash subsystem supports EEPROM emulation and live firmware swap. Hardware cryptographic accelerators (AES, SHA, TRNG) offload secure-boot and TLS workloads, while the Event System and Direct Memory Access Controller (DMAC) enable low-latency, CPU-offloaded data movement between peripherals and memory. Typical applications include industrial Ethernet gateways, PLC communication modules, building-automation controllers, USB peripherals, CAN-FD automotive body-domain modules, IoT edge nodes with TLS, and audio-processing front ends leveraging the DSP/FPU. The extended-temperature grade suits outdoor and automotive under-hood environments. When designing with this device, pay particular attention to decoupling strategy: place 100 nF X7R capacitors within 2 mm of every VDD pin, and provide a bulk 4.7 uF capacitor on each power domain. The 14x14 mm TQFP allows easy hand-soldering and rework, but its exposed pad must be soldered to a properly sized ground copper pour for thermal dissipation. This page synthesizes Microchip datasheet specifications, real-time distributor pricing as of 2026-09-21, drop-in TQFP-100 alternatives from the SAM E54/SAME5x family, and practical PCB design notes not consolidated in any single source.

RFC Hubungi kami
ATSAME54N20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash, TQFP-100 | Microchip
ATSAME54N20A-AFT

ATSAME54N20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash, TQFP-100 | Microchip

The Microchip Technology ATSAME54N20A-AFT is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and 256 KB SRAM with ECC, packaged in a 100-pin TQFP (14x14 mm). It also integrates a 10/100 Ethernet MAC and 2x CAN-FD controllers, making it well suited for connected industrial designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O onto a single chip. The ARM Cortex-M4F is a mainstream MCU core class widely used in industrial automation, motor control, and connected devices; it sits below Cortex-M7 in performance and above Cortex-M0+ in DSP capability. Microchip's SAM E54 family specifically targets applications needing both deterministic real-time control and high-bandwidth wired connectivity (Ethernet/CAN-FD). Key features include 120 MHz Cortex-M4F with FPU, 1 MB Flash with ECC, 256 KB SRAM with ECC, hardware cryptographic accelerator, I2S audio interfaces, 12-bit ADC/DAC, 16-bit timers, and a 12-channel DMA. The QSPI and SDHC peripherals enable external memory expansion for data logging or display buffering. The device uses a Harvard-bus architecture with tightly-coupled memories (TCM) and a multi-layer bus matrix, allowing parallel access to Flash, SRAM, and peripherals without contention. ECC on both Flash and SRAM improves reliability for industrial environments subject to soft-error events; the dual-panel Flash architecture supports in-field updates without halting execution (live update). Typical applications include industrial Ethernet gateways, building automation controllers, CAN-FD automotive body controllers (non-safety), USB-C charging hubs with Type-C PD, and human-machine interface (HMI) panels. The combination of Ethernet MAC + CAN-FD + USB makes it especially attractive for Industry 4.0 edge nodes and IoT appliances. When designing with this MCU, plan the clock tree early: the SAME54 requires a 32.768 kHz crystal for the RTC/DFLL and a main crystal or external clock for the PLL feeding the 120 MHz CPU clock. Decouple each VDD/VSS pin pair with 100 nF X7R ceramics placed as close as possible. For Ethernet, observe strict PCB layout guidelines (controlled impedance, ground pour stitching) per the SAME54 Ethernet PHY interface design checklist. This page synthesizes distributor pricing, drop-in alternatives within the SAME5x family, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
ATSAME54N20A-AU - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip
ATSAME54N20A-AU

ATSAME54N20A-AU - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip

The Microchip ATSAME54N20A-AU is a 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC, packaged in a 100-pin TQFP (14x14 mm). A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a rich set of on-chip peripherals around a single silicon die. The Cortex-M4F sits in the middle of the ARM Cortex-M taxonomy - between the smaller Cortex-M0+ (cost-optimised) and the larger Cortex-M7 (higher performance DSP). Within Microchip's portfolio, the SAM E54 belongs to the SAM D5x/E5x family and ranks among the highest-pin-count, highest-memory Cortex-M4F offerings before stepping up to Cortex-M7 (SAM S70/E70). Key features of the ATSAME54N20A-AU include: 120 MHz core clock, 1 MB dual-panel Flash with error correction, 256 KB SRAM with ECC, a 10/100 Ethernet MAC, two CAN-FD controllers, a high-speed USB 2.0 (480 Mbit/s) interface with on-chip HS PHY, a 12-bit 1 Msps ADC, two 12-bit 1 Msps DACs, SERCOM (configurable serial) peripherals, and an on-chip crypto accelerator (AES, True Random Number Generator). The 100-TQFP package exposes the full peripheral set including external memory bus and high-pin-count analog/digital features. Architecturally, the SAM E54 uses a Harvard-style bus with separate AHB/APB matrices, enabling simultaneous Flash fetch, peripheral DMA, and Ethernet traffic. The dual-panel Flash allows one bank to be erased/written while the other executes code, supporting in-field firmware updates without downtime. The FPU executes single-precision IEEE 754 instructions in a single cycle, accelerating DSP and sensor-fusion workloads. Typical applications include industrial automation controllers, building-automation gateways, IoT edge nodes with Ethernet connectivity, automotive body and infotainment subsystems, medical patient-monitoring devices, and USB-connected human-interface peripherals. The integrated Ethernet MAC and HS USB PHY make it especially suitable for connected products that previously required an external PHY or a separate interface chip. When designing with the ATSAME54N20A-AU, plan power-rail sequencing so the 3.3 V analog supply (VDDANA) settles within 10 ms of the digital 3.3 V rail to keep the BOR/POR reset path deterministic. Decoupling: place a 100 nF X7R on every VDD pin and a bulk 4.7 µF near the package. For Ethernet, route the RMII traces length-matched to within 50 mil and keep them over a continuous ground plane. This page synthesises distributor pricing, drop-in same-family alternatives, application recommendations, and practical design notes not aggregated in a single place on the manufacturer product page or typical distributor listings.

RFC Hubungi kami
ATSAME54N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AU-EFP

ATSAME54N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME54N20A-AU-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM E54 family, integrating an FPU, DSP extensions, up to 1 MB of dual-panel Flash with ECC, and up to 256 KB of SRAM with ECC, all housed in a 100-pin TQFP (14x14 mm) package. It operates at up to 120 MHz and is designed for applications requiring deterministic real-time control combined with rich connectivity, including high-speed USB, 10/100 Ethernet, and CAN-FD. The -AU-EFP variant designates a Tray-packaged, AEC-Q100-qualified automotive-grade part with Microchip's Extended Flash Performance (EFP) endurance option. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals including timers, communication controllers, and analog blocks. The SAM E54 belongs to the Cortex-M4F class, which is a microcontroller architecture that adds a single-precision Floating-Point Unit and DSP instructions to the Cortex-M4 baseline. Within the broader hierarchy, the ATSAME54N20A-AU-EFP sits as: ARM Cortex-M4F core -> Cortex-M4 family -> ARM Cortex-M -> 32-bit RISC processor -> microcontroller -> embedded computing platform -> semiconductor device. Key features include 120 MHz CPU core with FPU and DSP, 1 MB Flash and 256 KB SRAM (both with ECC), high-speed USB 2.0 Full-Speed with on-chip PHY, 10/100 Mbps Ethernet MAC with IEEE 1588 PTP hardware support, two CAN-FD controllers, multiple SERCOM interfaces configurable as UART/SPI/I2C, a 12-bit 1 Msps ADC, dual 12-bit DACs, and a Cryptographic Engine supporting AES, True Random Number Generator, and secure boot. The TQFP-100 package exposes up to 84 GPIO lines and supports automotive operating temperature range of -40C to +125C. The SAM E54 architecture uses a multi-layer AHB/APB bus matrix that allows simultaneous DMA-driven peripheral and CPU activity, reducing interrupt load and improving deterministic response. ECC on Flash and SRAM is critical for ASIL-B functional safety paths and for industrial environments subject to alpha-induced soft errors. The integrated Ethernet MAC with 1588 PTP timestamping supports industrial automation protocols such as EtherCAT, PROFINET, and Modbus TCP without an external PHY timing MCU. Typical applications include industrial EtherCAT slave controllers, automotive body and gateway modules, USB-C audio interfaces, building automation controllers, and IEC 61508 SIL-2 capable safety systems. The combination of CAN-FD, Ethernet, and high-speed USB makes it especially suited for vehicle networking gateways that bridge CAN-FD body domains with Ethernet backbone networks. When designing with this device, ensure VDDIO and VDDCORE decoupling follow the manufacturer's reference layout with at least four 100 nF X7R capacitors and a single 4.7 uF bulk per rail. Configure the GCLK generator to lock the DFLL48M to the 32.768 kHz crystal before enabling the Ethernet MAC, since the MAC requires a 50 MHz or 25 MHz reference derived from a precise clock source. For automotive projects, prefer the Q1A suffix variants (this part is automotive-grade via -AU) and validate OTP memory lock bits before production flashing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
ATSAME54N20A-AUT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AUT

ATSAME54N20A-AUT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME54N20A-AUT is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of Dual-Panel Flash with ECC, and 256 KB of SRAM with ECC, housed in a 100-pin TQFP (14x14 mm) package qualified for the automotive -40C to +85C range. What is an ARM Cortex-M4F microcontroller? It is a 32-bit microcontroller core based on the ARMv7-M architecture with hardware single-precision floating point, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). In the power-management IC hierarchy, this device sits at the high-performance MCU tier used for digital control loops, communication stacks, and sensor fusion. The SAM E54 family adds peripheral integration such as 10/100 Ethernet MAC, CAN-FD, and high-speed USB, which makes it a step above general-purpose Cortex-M0/M3 designs. Key features of the ATSAME54N20A-AUT include up to 120 MHz core clock, 1 MB of Flash with Error Correction Code (ECC), 256 KB SRAM with ECC, a 12-bit 1 Msps ADC, a 12-bit DAC, two CAN-FD controllers, a 10/100 Mbps Ethernet MAC, full-speed and high-speed USB 2.0 with on-chip PHY, and a QSPI/SPI interface supporting external memory. The dual-panel Flash supports simultaneous read-while-write operation, enabling live firmware updates without stalling the CPU. The Cortex-M4F core delivers 1.25 DMIPS/MHz with hardware FPU and DSP saturating arithmetic, allowing high-speed fixed- and floating-point math. The peripheral event system and Direct Memory Access Controller (DMAC) offload repetitive I/O and data-movement tasks from the CPU, leaving headroom for control algorithms and protocol stacks running concurrently. Typical applications include industrial automation controllers, automotive body and gateway ECUs, building automation gateways with Ethernet or CAN-FD, IoT edge nodes with TLS acceleration, and graphical HMI panels driving TFT LCDs. The combination of CAN-FD, Ethernet, and USB also suits connected equipment that must bridge fieldbus and IP networks. When designing with this part, allocate the QSPI footprint even if unused, because PCB rework is easier than spinning the board. Always add a 32.768 kHz crystal and 12 MHz crystal because Ethernet and USB PHYs require precise timing references for compliance. This page synthesizes distributor pricing, drop-in alternatives from the SAM E54 family, and practical design notes that are not present in the manufacturer datasheet alone.

RFC Hubungi kami