A9KV-V2-FAN - Fan Tray with Filter for ASR 9000v-V2 | Cisco
MPN: A9KV-V2-FAN ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $200.99 | $200.99 |
| 10 | $200.99 | $2,009.90 |
| 100 | $200.99 | $20,099.00 |
| 500 | $200.99 | $100,495.00 |
| 1,000 | $200.99 | $200,990.00 |
A9KV-V2-FAN Overview
A fan tray (also called a fan module, blower assembly, or cooling module) is an electromechanical subsystem within network equipment that circulates air across line cards, power supplies, and backplanes. In the broader system hierarchy, it belongs to the chassis thermal management layer of a router platform, alongside power entry modules (PEMs) and supervisory components. Because routers dissipate hundreds of watts, forced-air cooling is a critical reliability function rather than an accessory.
Key characteristics of the A9KV-V2-FAN include its integrated dust filter, which protects internal components in harsh edge environments such as street cabinets and remote points of presence; its field-replaceable-unit (FRU) design, which allows hot-swap maintenance without chassis shutdown; and its Version 2 airflow design matched to the ASR 9000v-V2 chassis thermal profile. Distributors list it as UNSPSC 40101604 (fans and cooling assemblies).
According to the Cisco ASR 9000v data sheet, the ASR 9000v and ASR 9000v-V2 operate as extension shelves of the Cisco ASR 9000 Series Aggregation Services Routers using nV (network virtualized) satellite technology, and can be deployed adjacent to or remotely from their host router. In such remote deployments, the fan tray is a primary serviceability item: replacing a failed tray with the filter-equipped V2 unit restores designed airflow and extends hardware longevity.
Typical deployments include carrier edge and access aggregation, mobile backhaul sites, and high-density port extensions where the ASR 9000v-V2 shelf sits far from the host ASR 9000 chassis. Network operators keep spare fan trays on hand to meet MTTR targets.
When ordering, note that the bare MPN A9KV-V2-FAN and the spares-orderable code A9KV-V2-FAN= refer to the same hardware; verify chassis generation (V1 vs V2) and PEM version before purchase. Confirm the dust filter is seated correctly during installation to avoid airflow bypass.
This page synthesizes distributor pricing, chassis compatibility data, and practical deployment notes not found in a single manufacturer document.
Drop-in alternatives for A9KV-V2-FAN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with A9KV-V2-FAN (same form factor and footprint) — differing in Manufacturer, Product Type.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
No drop-in alternatives available for this product.
Request AlternativesA9KV-V2-FAN Maximum Ratings & Electrical Characteristics
| Product Type | Version 2 fan tray with filter |
| Compatible Chassis | Cisco ASR 9000v-V2 |
| Also Compatible With | ASR 9006 and 9010 with PEM Version 2 |
| Field Replaceable Unit | Yes |
| Integrated Dust Filter | Yes |
| Cooling Method | Forced air (fan tray) |
| Manufacturer | Cisco Systems |
| UNSPSC Code | 40101604 |
A9KV-V2-FAN standard Pin Configuration Guide
Pin configuration for A9KV-V2-FAN (standard package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for A9KV-V2-FAN.
Refer to the datasheet for full pin configuration.
Typical Applications
A9KV-V2-FAN is suitable for 6 applications: Carrier Edge and Access Aggregation, Mobile Backhaul Sites, Remote Points of Presence (POP), ASR 9006/9010 with PEM Version 2, High-Density Port Extension, Network Spares and RMA Programs.
Carrier Edge and Access Aggregation
The A9KV-V2-FAN maintains designed airflow in the Cisco ASR 9000v-V2 shelf, which Cisco deploys as an nV extension shelf of ASR 9000 Series aggregation routers at the network edge. In these sites the fan tray's integrated dust filter protects against particulate ingress typical of street cabinets and unconditioned vaults, and its FRU design allows replacement during live operation, keeping MTTR low for carrier-grade availability targets. Engineers sizing spares for an edge rollout should allocate at least one A9KV-V2-FAN per site where the ASR 9000v-V2 is deployed remotely, since a failed tray in a remote POP can take days to service. The V2 tray matches the V2 chassis thermal profile, so using the correct generation preserves the designed airflow margin.
Recommended
Mobile Backhaul Sites
Mobile backhaul deployments place ASR 9000v-V2 shelves at cell-site aggregation points where ambient temperature swings and dust are common. The A9KV-V2-FAN's filtered forced-air design sustains thermal performance in these environments, preventing the throttling and component-life reduction that result from restricted airflow. Because backhaul outage windows are tightly controlled, the fan tray's field-replaceable design lets technicians swap a degraded tray inside a short maintenance window without powering down traffic. Operators integrating the ASR 9000v-V2 with host ASR 9000 routers should confirm the fan tray generation matches the PEM version during any V1-to-V2 upgrade, as Cisco Community threads show these upgrades span multiple FRUs beyond cooling.
Recommended
Remote Points of Presence (POP)
Cisco's ASR 9000v data sheet explicitly supports deploying the 9000v-V2 remotely from its host router, creating many small points of presence. In each such POP, the A9KV-V2-FAN is the primary serviceable thermal component: its dust filter is specified for demanding edge environments, and hot-swap replacement avoids dispatching a truck roll with a maintenance outage. Network planners should track fan tray hours alongside filter condition, replacing the tray or filter when airflow alarms or elevated fan speeds indicate restriction. Holding a local spare of the A9KV-V2-FAN at each remote POP converts a multi-day RMA cycle into a same-day fix, protecting the SLA of the aggregated access services carried through the shelf.
Recommended
ASR 9006/9010 with PEM Version 2
Reseller listings specify the A9KV-V2-FAN for ASR 9006 and ASR 9010 chassis fitted with PEM Version 2 power entry modules. In these compact aggregation chassis, the V2 fan tray provides the cooling airflow matched to the V2 power and card configuration. Operators upgrading older 9006/9010 installations from V1 to V2 PEMs must verify that the cooling subsystem is also updated to the V2 tray, since mixing generations can leave the chassis with mismatched airflow management. The fan tray's integrated filter continues to protect the card cage in central-office and customer-premises environments, and its FRU status supports replacement without interrupting the line cards it cools.
Recommended
High-Density Port Extension
Cisco positions the ASR 9000v/9000v-V2 pair for applications requiring high-density ports or many remote points of presence, extending ASR 9000 Series capacity through nV satellite technology. High port density increases per-slot heat load, making the A9KV-V2-FAN's designed airflow essential to sustaining line-rate operation across all populated ports. The Version 2 tray's thermal profile matches the denser V2 shelf configuration, and its filter keeps dust from compounding thermal margins in crowded racks. Integrators should verify chassis fan tray firmware compatibility through Cisco release documentation and maintain alarm monitoring on the fan tray status so that degradation is detected before port-level thermal events occur.
Recommended
Network Spares and RMA Programs
For operators managing sparing pools across many ASR 9000v-V2 sites, the A9KV-V2-FAN is a standard stocking item. The trailing-equals spares code A9KV-V2-FAN= exists specifically for this purpose and, per distributor listings as of 2026-10-19, can be priced lower than the bare code ($190.99 vs $200.99 at Zones). A disciplined sparing policy stores fan trays in ESD-safe packaging, rotates stock to exercise fan bearings, and pairs each deployment region with at least one spare to meet restoration targets. Because the tray is chassis-specific with no third-party equivalent found in our cross-reference search, genuine Cisco stock is the only safe sparing option for warranty-covered networks.
Recommended
Recommended Products Summary
Engineering reference data for A9KV-V2-FAN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | A9KV-V2-FAN= | A9KV-FAN |
|---|---|---|---|
| Product Type | Version 2 fan tray with filter | Same fan tray, spares-orderable code | Version 1 fan tray for ASR 9000v |
| Brand | Cisco Systems | Cisco Systems | Cisco Systems |
| Package / Form Factor | Chassis fan tray FRU (ASR 9000v-V2) | Identical form factor | V1 chassis form factor (not interchangeable) |
| Compatible Chassis | ASR 9000v-V2; ASR 9006/9010 with PEM V2 | Same as this product | ASR 9000v (V1) only |
| Field Replaceable | Yes (FRU) | Yes | Yes |
| Drop-in Interchangeability | Reference product | Yes - identical hardware | No - different chassis generation |
Key Differentiators
- Version 2 airflow matched to ASR 9000v-V2 chassis (vs A9KV-FAN)
- Integrated dust filter for harsh edge environments (vs Generic fan assemblies)
- Identical hardware available at lower spares-code pricing (vs A9KV-V2-FAN=)
Design Notes
Verify chassis generation before ordering. The A9KV-V2-FAN is specified for the ASR 9000v-V2 shelf and ASR 9006/9010 chassis with PEM Version 2, not the original ASR 9000v (V1). Cisco Community threads on PEM V2 upgrades show that V1-to-V2 migration involves the power entry module as well as cooling, so assume a system-level upgrade rather than a single-FRU swap. Ordering the wrong generation is the most common procurement error for this part number.
During installation, seat the integrated dust filter evenly in its frame before closing the tray. An unseated filter creates an airflow bypass path that reduces effective cooling, raises internal component temperatures, and can trigger chassis thermal alarms. Inspect the filter at each maintenance visit and clean or replace it per Cisco's maintenance schedule, especially in street-cabinet and industrial environments where particulate loading is high.
Maintain the chassis front and rear clearance specified in the Cisco ASR 9000v hardware installation documentation so the fan tray can achieve its designed intake and exhaust airflow. Restricted rack clearance, cable bundles blocking exhaust, or missing blank panels in unused slots all degrade the airflow budget that the A9KV-V2-FAN is designed to deliver, causing fans to run at higher speeds, increasing acoustic noise and reducing bearing life.
Compliance Information
Compliance status not stated in the retrieved distributor listings; consult Cisco's official environmental compliance documentation for this FRU.