Analog Devices

AD621ARZ - 800 kHz Instrumentation Amplifier | Analog Devices

MPN: AD621ARZ ✓ Active
75 uV Vdss 500 pA Id 8-pin SOIC Package
MOQ: 1 |

AD621ARZ Overview

The Analog Devices AD621ARZ is a single-channel instrumentation amplifier with an 800 kHz small-signal bandwidth, 1.2 V/us slew rate, 500 pA input bias current, and approximately 75 uV output offset in an 8-pin SOIC package. Designed for low-power precision signal conditioning, it accepts differential input signals and provides a scaled output suitable for measurement, conversion, and control systems.

An instrumentation amplifier is a specialized amplifier optimized for measuring small differential signals while rejecting common-mode voltage. Within the amplifier hierarchy, the AD621 belongs to the instrumentation-amplifier class, which combines input-stage behavior, gain-setting resistors, and differential-to-single-ended conversion in one compact device. This integrated approach generally reduces the number of external precision components required compared with a discrete three-op-amp implementation.

The AD621ARZ provides an 800 kHz bandwidth, giving it useful frequency response for sensor outputs and industrial measurement signals. Its 500 pA input bias current limits the disturbance introduced into high-impedance sources, while the approximately 75 uV output offset identifies its precision baseline. The 1.2 V/us slew rate supports faster signal transitions than a low-bandwidth precision amplifier, and the single-channel architecture reduces board space for systems that do not require simultaneous multi-axis measurements.

The device is offered in an 8-pin SOIC package and operates from dual supplies of up to plus or minus 18 V. Its internally matched resistor network permits gain adjustment with a single external resistor when a conventional instrumentation-amplifier layout is used. Designers must follow the manufacturer pin and gain-setting guidance because incorrect resistor selection, inadequate supply bypassing, or unsuitable source impedance can degrade accuracy and common-mode performance.

Typical uses include bridge-transducer amplification, pressure and temperature measurement, current-sense front ends, biomedical instrumentation, and industrial analog-input conditioning. For high-impedance sensors, input bias current and leakage become important because they create error across the source impedance. For long cable runs or high-level industrial environments, common-mode range, supply voltage, grounding, and input filtering should be checked against the operating conditions.

When laying out the AD621ARZ, place the gain-setting resistor close to the appropriate device pins, keep input and return paths short, and provide local supply bypass capacitance. The gain resistor and feedback-network tolerances contribute directly to overall gain accuracy. Reference grounding and system grounding should also be arranged to prevent ground-potential differences from appearing as input error.

This product page combines the verified AD621ARZ specifications, a package-oriented comparison, drop-in replacement guidance, and practical PCB design notes. It is intended to help engineers determine whether the amplifier's bandwidth, precision, supply range, and single-channel SOIC implementation fit a specific measurement circuit.

Drop-in alternatives for AD621ARZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD621ARZ (same form factor and footprint) — differing in Package, Amplifier Type, Common-Mode Rejection Ratio, Gain, Gain Range.

Analog Devices
Package: 8-SOIC (0.154", 3.90mm Width)
Amplifier Type: Instrumentation Amplifier
Gain Range: 1 to 10,000
Compare with AD621ARZ →
Analog Devices
Package: 8-SOIC
Common-Mode Rejection Ratio: 120 dB
Gain: Internally set
Compare with AD621ARZ →
Analog Devices
Package: 8-SOIC
Amplifier Type: Instrumentation amplifier
Gain Range: 1 to 1000
Compare with AD621ARZ →
Texas Instruments
Package: 8-SOIC, 0.154 inch body width, 3.90 mm width
Common-Mode Rejection Ratio: 110 dB
Gain: 10 or 100
Compare with AD621ARZ →

AD621BRZ

✅ Drop-In
Analog Devices
📦 8-pin SOIC
Instrumentation amplifier · 1 channel · 800 kHz · 120 dB · Internally set · 8-SOIC · 8 pins · Surface mount

Contact for price

View Datasheet →

AD621AR

✅ Drop-In
Analog Devices
📦 8-pin SOIC
Single-channel instrumentation amplifier · Analog Devices · 8-SOIC · 1 circuit · Integrated three-op-amp instrumentation-amplifier architecture · Low power · Low drift · High accuracy

Contact for price

View Datasheet →

AD621ARZ-R7

✅ Drop-In
📦 8-pin SOIC
Same 800 kHz bandwidth and 1.2 V/us slew rate, with a distinct reel-oriented ordering suffix

📋 Reference alternative (not in catalog)

AD620ARZ

✅ Drop-In
Analog Devices
📦 8-pin SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 · ±2.3 V to ±18 V · 1.3 mA · 100 dB · 50 µV · 1.0 nA

Contact for price

View Datasheet →

AD8228ARZ

✅ Drop-In
📦 8-pin SOIC
AD621ARZ provides 800 kHz bandwidth with external gain setting, while AD8228ARZ uses internal trimmed gain-setting resistors

📋 Reference alternative (not in catalog)

AD621ARZ Maximum Ratings & Electrical Characteristics

Amplifier Type Single-channel instrumentation amplifier
Number of Channels 1 circuit
Small-Signal Bandwidth 800 kHz
Slew Rate 1.2 V/us
Input Bias Current 500 pA
Output Offset Voltage 75 uV
Supply Voltage Range Up to +/-18 V
Package 8-pin SOIC
Mounting Type Surface mount
RoHS Status Compliant

AD621ARZ 8-pin soic Pin Configuration Guide

Pin configuration for AD621ARZ (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for AD621ARZ

No detailed pinout data available for AD621ARZ.

Refer to the datasheet for full pin configuration.

Typical Applications

AD621ARZ is suitable for 6 applications: Bridge Transducer Signal Conditioning, Pressure Sensor Front End, Industrial Current Sensing, Temperature Measurement Systems, Biomedical Instrument Front End, Data Acquisition Analog Input.

🏭

Bridge Transducer Signal Conditioning

The AD621ARZ fits bridge-based sensing because its differential input architecture can amplify the small voltage generated by a resistive sensor while rejecting much of the common-mode excitation voltage. Its specified 500 pA input bias current minimizes current-related disturbance in high-impedance bridge networks, while the 800 kHz bandwidth allows the amplifier to follow sensor dynamics beyond static DC measurements. The 75 uV output-offset figure is also important when the downstream converter must resolve small changes in a small full-scale signal.

🧩

Pressure Sensor Front End

The AD621ARZ is suitable for conditioning a low-level differential pressure-sensor signal when the circuit requires a compact analog front end. A single-channel SOIC-8 implementation preserves board area, and the 800 kHz bandwidth provides substantially more response speed than is commonly needed for static pressure measurement. The 1.2 V/us slew rate helps preserve large-signal behavior, while the 500 pA input bias current helps preserve accuracy with resistive sensing elements. Supply headroom must cover the sensor excitation and required output swing.

⚡

Industrial Current Sensing

The AD621ARZ can amplify a differential shunt voltage in an industrial current-measurement channel. Its 800 kHz small-signal bandwidth supports faster current transients, and the 1.2 V/us slew rate reduces large-signal distortion when the measured current changes quickly. The approximately 75 uV output offset represents the precision baseline that must be included in the current-measurement error budget. Layout should use a low-impedance return path and keep high-current copper away from the amplifier inputs to avoid unwanted differential pickup.

🧩

Temperature Measurement Systems

The AD621ARZ can condition the differential output of a resistive temperature detector or temperature sensor bridge. The 500 pA input bias current is especially useful when the sensing element and traces present high source impedance, because bias current multiplied by source resistance creates measurement error. The amplifier's 800 kHz bandwidth provides more bandwidth than typical thermal systems require, making sensor settling and system filtering important considerations. Use stable gain components and reference grounding to preserve repeatability across temperature changes.

💊

Biomedical Instrument Front End

The AD621ARZ can serve as the analog input stage of a biomedical measurement instrument when the selected electrode, sensor, and isolation architecture meet the required safety limits. Its differential input arrangement is appropriate for rejecting common-mode pickup around a physiological measurement, and the 500 pA input bias current can benefit high-impedance sensing arrangements. The 800 kHz bandwidth covers a broad measurement range, but electrode motion, input protection, isolation, leakage, and applicable medical qualification must be evaluated independently.

🖥️

Data Acquisition Analog Input

The AD621ARZ is useful in a compact data-acquisition channel that converts a low-level differential sensor output into a single-ended voltage suitable for an ADC. The 800 kHz bandwidth allows the amplifier to preserve faster signal content, while the 1.2 V/us slew rate helps the output settle before conversion. The approximately 75 uV offset and 500 pA bias current contribute to the total error budget. Designers should allocate amplifier settling time, anti-alias filtering, ADC input range, and gain accuracy around this stage.

What is the AD621ARZ?
The AD621ARZ is a single-channel, low-power instrumentation amplifier designed for precision differential-signal conditioning. According to the Analog Devices manufacturer datasheet, it provides an 800 kHz small-signal bandwidth, 1.2 V/us slew rate, 500 pA input bias current, and approximately 75 uV output offset. It is packaged in an 8-pin SOIC for surface-mount industrial, instrumentation, and sensor-interface designs.
What are the key specifications of AD621ARZ that engineers should know?
The AD621ARZ combines an 800 kHz bandwidth with a 1.2 V/us slew rate in one channel. Its specified input bias current is 500 pA, output offset is approximately 75 uV, and supply capability extends to plus or minus 18 V. These characteristics make it useful for low-level differential measurements where source loading, response speed, output offset, and available supply headroom determine the achievable measurement accuracy.
Where can I download the AD621ARZ datasheet PDF?
The official AD621ARZ datasheet is available through the Analog Devices AD621 product page at https://www.analog.com/en/products/ad621.html. Use the manufacturer datasheet for the authoritative pin-description table, gain equations, electrical characteristics, supply-current limits, common-mode range, and recommended application circuits before committing the SOIC-8 layout to production.
Where can I find the AD621ARZ pinout?
The AD621ARZ pinout is identified in the Analog Devices manufacturer datasheet associated with the AD621 product page. The device uses an 8-pin SOIC outline, but engineers should assign each PCB land from the manufacturer pin-description table rather than relying on generic SOIC drawings. Pay particular attention to input polarity, supply pins, output, reference input, and gain-setting resistor connections.
What supply voltage does the AD621ARZ require?
The AD621ARZ supports dual supplies of up to plus or minus 18 V. The exact operating combinations, allowable input and output swing, and quiescent current should be confirmed from the electrical-characteristics table in the Analog Devices manufacturer datasheet. Local supply bypassing remains necessary near the device because a distant capacitor cannot provide the same high-frequency return path.
Is AD621ARZ suitable for high-impedance sensor signals?
The AD621ARZ can suit high-impedance sensors when its 500 pA input bias current is sufficiently below the signal-current error budget. Input impedance, leakage, source capacitance, and the resulting settling behavior still require verification for the actual sensor and cable. The 800 kHz bandwidth supports faster signals, but common-mode range and supply headroom must remain valid for the measured differential voltage.
AD621ARZ vs AD621BRZ - which is better for industrial equipment?
Choose the AD621ARZ for its specified 800 kHz bandwidth, 1.2 V/us slew rate, and operating context, but prefer AD621BRZ when its temperature grade better matches the industrial environment. Both are identified as AD621-family SOIC-8 devices, making the mechanical transition straightforward. The manufacturer ordering table and electrical-characteristics tables should be compared for temperature ratings and any grade-specific limits before selection.
What is the difference between AD621ARZ and AD8228ARZ?
The AD621ARZ is a 800 kHz, 1.2 V/us AD621-family instrumentation amplifier, whereas the AD8228ARZ is characterized as a high-performance instrumentation amplifier with internally trimmed gain-setting resistors. The internal gain implementation of the AD8228 changes circuit configuration and gain options, so a mechanical SOIC-8 match alone does not guarantee identical board behavior. Verify gain programming, reference handling, supply requirements, and timing before substitution.
When should I choose AD621ARZ over AD620ARZ?
Choose AD621ARZ when the AD621 family's stated 800 kHz bandwidth, 1.2 V/us slew rate, 500 pA input bias current, and approximately 75 uV output offset align with the required response and accuracy. AD620ARZ is also associated with an 8-pin SOIC footprint, but its gain characteristics and performance targets differ. Choose based on the complete input, output, gain, supply, and accuracy requirements rather than package similarity alone.
Can AD620ARZ replace AD621ARZ on the same PCB?
AD620ARZ can be considered for an 8-pin SOIC instrumentation-amplifier layout only after checking every electrical and gain-setting condition. The AD621ARZ is specified at 800 kHz bandwidth with 1.2 V/us slew rate, while the AD620 family has different gain and performance characteristics. Confirm pin functions, supply limits, gain equation, reference connection, output range, stability, and timing; otherwise use a resistor or layout change rather than assuming a drop-in replacement.
What can replace AD621ARZ?
The closest listed hardware candidates are the 8-pin SOIC AD621-family parts and AD620ARZ, but no replacement should be selected from package appearance alone. AD621BRZ offers a distinct temperature grade, AD621AR represents a related ordering configuration, and AD620ARZ has different gain behavior. Review the manufacturer pin and electrical tables, then qualify the chosen part for accuracy, bandwidth, common-mode range, supply noise, and temperature performance.
Is AD621ARZ the same as AD621ARZ-R7?
No. AD621ARZ and AD621ARZ-R7 identify different ordering configurations of the AD621 device, with the -R7 suffix indicating a distinct packing option rather than a different circuit function. Their manufacturer ordering information must be checked for reel orientation, quantity, and commercial terms. For PCB design, both are associated with the 8-pin SOIC device family, but the mechanical shipping format does not change the circuit requirements.
Where can I buy AD621ARZ and what is its price?
Use the Request a Quote form on this page to request the current AD621ARZ unit price, stock position, minimum order quantity, and lead time. Commercial availability and pricing change with quantity, packaging, and market conditions, so request the exact AD621ARZ ordering code. The manufacturer product page remains the authoritative source for lifecycle and technical documentation.
What is the lead time and stock status for AD621ARZ?
Request the current AD621ARZ stock status, lead time, minimum order quantity, and shipment schedule through the Request a Quote form on this page. The ordering code identifies an 8-pin SOIC device, but procurement timing is not fixed by the package or circuit description. A quotation response should confirm the quantity, tube or reel logistics, and the delivery commitment for the requested configuration.
Is AD621ARZ RoHS compliant?
Yes, the AD621ARZ is listed as RoHS compliant in the product sourcing information for this device. RoHS compliance concerns restricted substances in the component and its supply-chain construction; it does not by itself guarantee suitability for every automotive, medical, or safety-regulated application. For those systems, review the required qualification and environmental specifications separately.

Engineering reference data for AD621ARZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD621ARZ when a single-channel, 8-pin SOIC instrumentation amplifier must provide an 800 kHz small-signal bandwidth, 1.2 V/us slew rate, 500 pA input bias current, and approximately 75 uV output offset. It is particularly suitable for bridge sensors, current shunts, and compact data-acquisition channels where the source impedance and common-mode range fit the amplifier's electrical limits. Select AD621BRZ when its temperature-grade ordering configuration better matches the product qualification target. Consider AD620ARZ only when its different gain behavior and electrical limits meet the circuit requirements; it is not interchangeable solely because both use an 8-pin SOIC. Evaluate AD8228ARZ when internally trimmed gain-setting resistors justify a circuit change. For all alternatives, verify supply range, common-mode limits, output swing, reference configuration, gain equation, temperature rating, and stability before releasing a PCB or production design.

Comparison with Alternatives

Parameter This Product AD621BRZ AD621AR AD621ARZ-R7 AD620ARZ AD8228ARZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Gain Configuration AD621-family gain-setting arrangement AD621-family gain-setting arrangement AD621-family gain-setting arrangement AD621-family gain-setting arrangement AD620-family gain-setting arrangement Internally trimmed gain-setting resistors

Key Differentiators

  • Higher stated slew rate than the AD620-family candidate (vs AD620ARZ)
  • External gain-setting arrangement in an 8-pin SOIC (vs AD8228ARZ)
  • Specified low input bias current for high-impedance sources (vs AD8228ARZ)
  • Defined 800 kHz bandwidth and 1.2 V/us response (vs AD621BRZ)

Design Notes

Assign the PCB footprint from the Analog Devices AD621 package drawing rather than a generic 8-pin SOIC outline. Route the differential inputs as a closely matched pair, keep them away from high-current switching paths, and place the gain-setting resistor near the specified device pins. Short return paths and a quiet ground reference reduce gain error and susceptibility to common-mode pickup.

Place local supply-bypass capacitors at the AD621ARZ supply pins and provide adequate return paths for high-frequency currents. The amplifier supports dual supplies of up to plus or minus 18 V, but the usable signal range also depends on input common-mode limits and output swing. Check both rails against the worst-case sensor excitation, load transient, and output voltage before finalizing the power architecture.

Do not assume that an 8-pin SOIC footprint makes every instrumentation amplifier electrically interchangeable. AD620ARZ uses different gain characteristics, while AD8228ARZ uses internal trimmed gain-setting resistors. The AD621ARZ gain equation, reference connection, output limits, and settling behavior must be checked before substitution. Also account for the specified 75 uV output offset and 500 pA input bias current in the measurement-error budget.

For high-impedance sensors, treat input bias current, leakage, and cable capacitance as an error-and-settling problem rather than only a signal-propagation issue. The specified 500 pA input bias current can create a measurable voltage error across a large source impedance. Use guarded or shielded routing where appropriate, filter at a frequency consistent with the 800 kHz bandwidth, and validate settling before the system samples the output.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified for AD621ARZ. The AD621ARZ is an industrial instrumentation amplifier, so AEC-Q100 qualification is treated as not applicable. No additional REACH, lead-free, halogen-free, or conflict-minerals declarations were established for this exact ordering code.

Related Searches

ad621arz datasheet AD621ARZ pinout AD621ARZ datasheet pdf AD621ARZ 800 kHz amplifier AD621ARZ 500 pA bias current AD621ARZ SOIC-8 footprint AD621ARZ equivalent AD621ARZ replacement AD621ARZ vs AD621BRZ AD621ARZ price AD621ARZ stock Analog Devices AD621ARZ

Related Components & Terms

Analog Devices AD621ARZ AD621 AD621BRZ AD621AR AD621ARZ-R7 AD620ARZ AD8228ARZ instrumentation amplifier differential amplifier signal conditioner precision analog IC amplifier IC semiconductor 8-pin SOIC SOIC family surface-mount package small-signal bandwidth slew rate input bias current output offset voltage bridge transducer current shunt RoHS single-channel amplifier
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details