AD9060KZ - 10-Bit 75 MSPS Parallel ADC | Analog Devices
MPN: AD9060KZ ✗ End of LifeAD9060KZ Overview
A flash ADC is a parallel-input-to-parallel-output data converter that uses multiple comparators and internal decoding to convert an analog voltage into a digital code. Within the broader ADC and DAC category, it belongs to the high-speed ADC family and ultimately to the integrated-circuit and semiconductor hierarchies. Parallel outputs expose multiple data bits simultaneously, making this converter suitable for systems that can capture and process each sample through high-speed digital logic.
The AD9060KZ principal characteristics are 10-bit resolution, a 75 MSPS conversion rate, one internal converter channel, a parallel interface, and a 68-pin CLCC package. At 75 million samples per second, its nominal sample interval is approximately 13.33 nanoseconds. These figures define its suitability for high-speed sampling but also require careful clocking, data-capture, grounding, and power-supply design to achieve predictable system behavior.
The manufacturer characterizes the AD9060 as a flash A/D converter and documents transient response and overvoltage recovery time as important specifications. These characteristics affect how quickly the converter returns to full accuracy after a large analog step or input excursion. Because its output is parallel rather than serial, the receiving logic must capture ten output bits per conversion without introducing excessive timing skew or data-valid uncertainty.
Typical uses include digital oscilloscopes, communications receivers, radar or signal-processing front ends, industrial measurement systems, and laboratory instruments. The 75 MSPS sampling rate can support acquisition of rapidly changing analog waveforms, while the 10-bit word length provides a practical balance between conversion speed and digital data volume. Commercial-temperature operation suits controlled indoor industrial, laboratory, and communications equipment rather than extended automotive or outdoor environments.
Designers should pay particular attention to clock jitter, analog input bandwidth, source impedance, reference stability, output timing, and return-path layout. A high sample rate does not guarantee high usable bandwidth if the source, clock, reference, or downstream capture circuit introduces additional distortion. The AD9060 datasheet should be used to confirm pin assignments, timing definitions, supply requirements, and the complete recommended application circuit before layout is released.
This product record combines the manufacturer specifications, exact package identification, lifecycle information, comparison details, and application-oriented engineering guidance. It also distinguishes the AD9060KZ from its documented AD9060JZ family counterpart while clearly identifying that no additional verified pin-compatible alternatives were established.
Drop-in alternatives for AD9060KZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
AD9060JZ
✅ Drop-InContact for price
View Datasheet →AD9060KZ Maximum Ratings & Electrical Characteristics
| Resolution | 10 bit |
| Sampling Rate | 75 MSPS |
| Conversion Architecture | Flash |
| Data Interface | Parallel |
| Number of Converters | 1 converter |
| Package | 68-pin CLCC |
| Package Code | HQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Number of Terminals | 68 terminals |
| Operating Temperature | 0°C to 70°C |
| Temperature Grade | Commercial |
| Packaging | Tube |
| Product Status | Obsolete |
AD9060KZ square Pin Configuration Guide
Pin configuration for AD9060KZ (square package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD9060KZ.
Refer to the datasheet for full pin configuration.
Typical Applications
AD9060KZ is suitable for 6 applications: Digital Oscilloscope Front End, Communications Receiver, Industrial Signal Analyzer, Radar and Pulse Capture, Laboratory Instrumentation, Video and Imaging Support.
Digital Oscilloscope Front End
The AD9060KZ fits a high-speed oscilloscope acquisition channel because it converts at 75 MSPS with a 10-bit parallel output, establishing an ideal sample interval of approximately 13.33 ns. The flash architecture is appropriate for capturing rapidly changing waveforms, while the 10-bit code provides a practical balance between temporal resolution and digital data volume. The 68-pin CLCC package requires careful routing between the converter, clock source, memory, and analog input network. Clock jitter, output skew, reference stability, and the manufacturer-defined transient and overvoltage recovery behavior ultimately determine whether captured data retains useful fidelity.
Recommended
Communications Receiver
The AD9060KZ can serve as the sampling element in a communications receiver that requires a parallel conversion interface and a 75 MSPS conversion rate. Its 10-bit resolution supports digitizing intermediate-frequency or baseband signals where the receiver backend performs filtering, demodulation, or spectral analysis. The parallel interface allows ten bits to be presented concurrently for capture by FPGA or high-speed logic. Practical implementation requires clean clocking, controlled return paths, an appropriate analog input driver, and verification of datasheet timing when the captured signal contains high-frequency components near the converter bandwidth.
Recommended
Industrial Signal Analyzer
For an industrial signal analyzer operating in controlled commercial environments, the AD9060KZ offers 75 MSPS sampling and 10-bit vertical resolution in a component rated from 0°C to 70°C. Those characteristics suit inspection, process-monitoring, vibration, and electrical waveform systems where the input changes faster than conventional low-rate converters can capture. The parallel output supports direct connection to capture logic, but the analog front end must provide the required bandwidth and signal amplitude. Engineers should design around the documented transient response and overvoltage recovery specifications, especially when the measured source can make abrupt full-scale transitions.
Recommended
Radar and Pulse Capture
The AD9060KZ is applicable to radar, pulse, or transient capture systems that require a 75 MSPS conversion rate and parallel digital delivery. A 10-bit flash ADC can represent rapidly varying return signals while transferring each code to downstream field-programmable logic or memory without a serial interface. Sampling-head design remains the dominant challenge: source impedance, bandwidth, clock jitter, and grounding can limit real performance even when nominal conversion rate and resolution are suitable. Use the Analog Devices AD9060 datasheet to establish timing, supply, reference, and transient-response requirements before fixing the acquisition architecture.
Recommended
Laboratory Instrumentation
The AD9060KZ suits laboratory instruments that must digitize changing analog signals at 75 MSPS and retain a simple parallel data path. The 10-bit resolution is adequate for many measurement, education, and bench-instrument applications, and the commercial 0°C to 70°C rating suits controlled laboratory conditions. A robust implementation includes a stable sampling clock, a controlled analog input driver, local decoupling, and acquisition logic that respects the converter's output timing. Because the device is obsolete, an instrument intended for long-term production should also evaluate a currently active converter and reserve the AD9060KZ for proven legacy platforms.
Recommended
Video and Imaging Support
The AD9060KZ can support specialized imaging and video measurement tasks that require a fast parallel ADC rather than a general-purpose slow conversion path. Its 75 MSPS rate and 10-bit resolution are relevant to analog video monitoring, intensity sampling, and test systems that capture rapidly varying sensor outputs. The design must account for the converter's 10-bit parallel output, input bandwidth, clock timing, and the specific transient-response behavior documented by Analog Devices. Analog input filtering and output capture should be developed against the manufacturer timing tables, and an obsolete device should receive an active-part review before use in a new, long-lived imaging platform.
Recommended
Recommended Products Summary
Engineering reference data for AD9060KZ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD9060JZ |
|---|---|---|
| Package | 68-pin CLCC | CLCC-68 |
| Brand | Analog Devices | Analog Devices |
| Resolution | 10 bit | 10 bit |
| Sampling Rate | 75 MSPS | 75 MSPS |
| Data Interface | Parallel | Parallel |
| Number of Converters | 1 converter | 1 converter |
| Operating Temperature | 0°C to 70°C | 0°C to 70°C |
| Product Status | Obsolete | Obsolete |
| Packaging | Tube | Tube |
Key Differentiators
- Exact-family ordering with matched principal specifications (vs AD9060JZ)
- Parallel data delivery supports direct capture-logic interfaces (vs AD9060JZ)
- Commercial-temperature operation for controlled equipment (vs AD9060JZ)
Design Notes
Route the ten parallel output bits as a compact, length-matched group into the receiving logic. At 75 MSPS, the ideal sample interval is approximately 13.33 ns, so clock-to-data timing, output skew, and board skew can affect valid capture windows. Use the manufacturer timing tables as the source of truth and keep the clock path short, continuous, and isolated from high-current switching paths.
Treat the analog input as a high-speed transmission path rather than a generic sensor connection. Provide a controlled source impedance, suitable input bandwidth, and a return path that does not share switching-current geometry with the converter. Validate full-scale step behavior against the documented transient response and overvoltage recovery time, since recovery time can affect capture accuracy after abrupt input changes.
Do not infer electrical or pin compatibility solely from the shared AD9060 family name. The available comparison establishes matching 10-bit resolution, 75 MSPS sampling, parallel interface, 68-pin CLCC package, and 0°C to 70°C range for AD9060JZ, but detailed supply, timing, and terminal assignments still require verification against the official datasheets. For a new long-lived product, evaluate an active converter rather than standardizing an obsolete device.
Compliance Information
The comparison record mentions RoHS-compliant applications, but it does not explicitly establish the RoHS status of AD9060KZ. The AD9060 family is available in versions compliant with MIL-STD-883, but that family statement does not establish qualification of the standard commercial AD9060KZ ordering code.
