AD976CRS - 16-Bit 100 kSPS ADC | Analog Devices | SSOP
MPN: AD976CRS ✗ End of LifeAD976CRS Overview
An ADC is an interface IC that converts an analog voltage into a digital code. The AD976 belongs to the successive-approximation ADC family, which repeatedly compares the sampled input with a reference-controlled internal DAC. It sits between sensors, instrumentation amplifiers, and industrial signal sources on one side and digital processors, field buses, and data-acquisition systems on the other. Its parallel interface transfers each 16-bit result directly rather than serializing the data through a communications link.
Key features include 16-bit resolution, 100 kSPS throughput, operation from a single 5 V supply, a 100 mW maximum input range, and selectable external or internal 2.5 V reference. The high-speed parallel interface reduces the time required to move conversion results into digital circuitry, while the on-chip clock provides a convenient timing source. The AD976CRS also permits the 100 kSPS AD976 and 200 kSPS AD976A functions to share a common converter family and package family.
The converter uses a switched-capacitor, successive-approximation architecture. Its internal reference option supports self-contained analog-to-digital conversion, while the external reference option allows the measurement accuracy to track a higher-quality voltage source. The parallel data interface is especially useful when samples must be captured quickly or transferred into parallel-processing logic without the overhead of a serial frame.
Typical applications include industrial process monitoring, instrumentation, digital oscilloscopes, data-acquisition instruments, communications receivers, and precision measurement systems. The 100 kSPS rate supports continuously sampled waveforms while maintaining a relatively simple parallel-data implementation. The 28-lead SSOP package is also suitable for compact analog and mixed-signal equipment where board area and external component count matter.
The main design consideration is reference and interface implementation. Use the manufacturer pin-description table when assigning the 28 signal and power pins, place bypass capacitors close to the supply pins, and ensure the external clock, reference, and digital output timing meet the required acquisition sequence. The input range and full-scale calibration should be established together because converter code accuracy depends on both the analog signal and the reference voltage.
This page organizes the core AD976CRS specifications, sourcing options, engineering guidance, and pin-compatible family alternatives. It helps engineers evaluate the converter by throughput, resolution, supply voltage, reference architecture, and package rather than relying on a basic product identifier alone.
Drop-in alternatives for AD976CRS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD976CRS (same form factor and footprint) — differing in Package, Architecture, Converter Type, Supply Voltage, Maximum Power Dissipation.
AD976CR
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →AD976CN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →AD976BRS
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →AD976BR
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →AD976CRS Maximum Ratings & Electrical Characteristics
| Converter Type | 16-bit successive-approximation A/D converter |
| Resolution | 16 bit |
| Throughput Rate | 100 kSPS |
| AD976A Family Throughput Rate | 200 kSPS |
| Supply Voltage | 5 V single supply |
| Input Range | 100 mW maximum |
| Reference Voltage | 2.5 V internal or external |
| Architecture | Switched-capacitor successive approximation |
| Digital Interface | High-speed parallel |
| Clock | On-chip clock |
| Maximum Power Dissipation | 100 mW maximum |
| Package | 28-lead SSOP |
| Package Width | 5.30 mm maximum |
| Pitch | 0.65 mm |
| Lead Count | 28 leads |
| Mounting Type | Surface mount |
| Process Technology | BiCMOS |
AD976CRS 5.30 mm maximum Pin Configuration Guide
Pin configuration for AD976CRS (5.30 mm maximum package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD976CRS.
Refer to the datasheet for full pin configuration.
Typical Applications
AD976CRS is suitable for 6 applications: Industrial Process Monitoring, Digital Oscilloscope and Waveform Capture, Communications Receiver and Baseband, Precision Data-Acquisition Instrumentation, Digital Sensor Interface, Test and Measurement Equipment.
Industrial Process Monitoring
The AD976CRS suits process-monitoring systems that must acquire slowly changing or repetitive analog signals while retaining 16-bit numerical resolution. Its 100 kSPS throughput provides temporal resolution beyond basic threshold sensing, while the 5 V single-supply operation simplifies integration near industrial measurement electronics. Place the converter behind an appropriately conditioned analog input, use the internal or external 2.5 V reference according to calibration requirements, and capture the parallel output with acquisition logic timed to the manufacturer interface diagrams.
Recommended
Digital Oscilloscope and Waveform Capture
The AD976CRS can serve as the sampling ADC in a digital oscilloscope or waveform-acquisition instrument because it combines 16-bit resolution with a 100 kSPS conversion rate. The parallel interface allows sample words to move efficiently into capture memory or digital processing logic. The design must ensure that the input amplifier can drive the converter through the specified 100 mW maximum range, the 2.5 V reference is sufficiently stable, and the clocking and output-enable sequence follows the manufacturer timing diagrams.
Recommended
Communications Receiver and Baseband
The AD976CRS is appropriate for communications receivers that digitize baseband or intermediate-frequency signals and transfer each sample into parallel logic. The 16-bit conversion format preserves amplitude detail, while the 100 kSPS rate supports lower-rate modulation formats and measurement functions. A practical implementation requires controlled input gain, filtering for alias and bandwidth requirements, a low-noise reference arrangement, and careful routing of the 16-bit parallel bus to minimize data-timing errors.
Recommended
Precision Data-Acquisition Instrumentation
The AD976CRS supports precision data-acquisition instruments requiring more resolution than a conventional low-resolution mixed-signal ADC. Its 16-bit result width, selectable 2.5 V reference, and 100 kSPS sampling rate are useful for laboratory and field measurement systems. For best performance, the analog front end should provide gain and bandwidth appropriate to the converter input range, reference error should be included in the calibration budget, and PCB return paths should minimize coupling between the analog input and parallel digital outputs.
Recommended
Digital Sensor Interface
The AD976CRS can digitize outputs from bridge sensors, resistive dividers, and other conditioned analog sensor systems in a compact embedded controller. The 100 kSPS throughput is sufficient for many temperature, position, pressure, and level measurements, while 16-bit resolution helps preserve small signal changes. The converter should be paired with sensor excitation and instrumentation circuitry designed for the 100 mW maximum input range, with care taken to control reference drift, ground potential differences, and switching noise around the analog input.
Recommended
Test and Measurement Equipment
The AD976CRS is useful in test and measurement products that need a compact, parallel-output ADC for automated signal capture. Its 100 kSPS rate supports many low-to-medium-frequency measurement tasks, while the 16-bit code width allows calibration and compensation to be performed in digital logic. To achieve repeatable results, the converter should share a carefully referenced supply and ground plan with the analog front end, and the acquisition controller should enforce the specified conversion, output-enable, and parallel-data timing.
Recommended
Recommended Products Summary
Engineering reference data for AD976CRS — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD976CR | AD976CN | AD976BRS | AD976BR |
|---|---|---|---|---|---|
| Package | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply |
Key Differentiators
- Balanced 16-bit resolution and 100 kSPS throughput (vs AD976ARZ)
- Single 5 V operation with selectable 2.5 V reference (vs AD976A)
- High-speed parallel output supports direct acquisition-logic connection (vs AD976CR)
Design Notes
Place the supply bypass capacitor adjacent to the AD976CRS supply and ground pins, and use a continuous ground reference beneath the device where the package construction permits it. Route the analog input away from the 16-bit parallel outputs and clock signals. The SSOP lead pitch requires a land pattern that matches the manufacturer package drawing exactly, including body width, lead span, and toe geometry.
Treat the 16-bit parallel data bus as a synchronous interface. Establish the conversion-complete or output-enable timing from the manufacturer diagrams, constrain the acquisition logic to the correct output state, and avoid routing the bus through long unterminated branches. If the converter drives an external connector or a distant processor, add suitable buffering so the load does not distort the digital outputs.
Do not assume that every AD976-family ordering code is interchangeable. Check the package, temperature grade, performance grade, reference configuration, and exact pin assignments for AD976CR, AD976CN, AD976BRS, or AD976BR before replacing AD976CRS. The AD976A family is identified as 200 kSPS, so its faster conversion timing also requires downstream timing review.
Operate the converter from a single 5 V supply and keep the analog reference arrangement within its intended operating range. If the internal 2.5 V reference is used, include its initial error and drift in the measurement calibration. If an external reference is used, provide a low-noise source with adequate decoupling and route its return current consistently with the converter ground reference.
Compliance Information
The AD976 is a general-purpose analog-to-digital converter; no automotive qualification claim is identified. Confirm material and environmental compliance for the current ordering code with Analog Devices before release to production.