AKM (Asahi Kasei Microdevices)

AK4352VT - 2V Low-Power Multi-Bit DAC | Asahi Kasei

MPN: AK4352VT ✓ Active
2 V Vdss
MOQ: 1 |

AK4352VT Overview

The Asahi Kasei AK4352VT is a 2 V, low-power, multi-bit delta-sigma digital-to-analog converter designed for audio signal generation. The AK4352VT belongs to the ADC/DAC and special-purpose integrated-circuit categories, where it converts digital audio data into an analog voltage output. It is supplied in a tape-and-reel package and is identified by the AK4352VT manufacturer part number.

A multi-bit delta-sigma DAC is a semiconductor that uses a multi-bit internal converter and digital noise-shaping techniques to create an analog output from a digital input stream. In a signal chain, a DAC follows the digital source, decoding stage, or digital audio processor. The AK4352VT is therefore positioned between digital audio logic and an analog audio output stage, where its 2 V operating class and low-power design are the principal documented characteristics.

The available manufacturer and distributor records identify AK4352VT as a 2 V, low-power multi-bit DAC intended for special-purpose ADC/DAC applications. The part is listed under tape-and-reel packaging, indicating a production configuration intended for automated high-volume PCB assembly. Because the searchable technical record does not expose the complete electrical tables in this result set, detailed resolution, dynamic-range, clock, distortion, and pin-level values should be confirmed in the manufacturer datasheet before schematic sign-off.

Typical design roles include digital-to-analog conversion in compact audio equipment, multimedia systems, consumer-electronics signal paths, and equipment requiring a dedicated low-power stereo or single-channel audio output stage. System designers should pay particular attention to supply sequencing, digital-interface compatibility, analog output filtering, and the required bypass capacitors before treating the converter as production-ready.

A key design consideration is that a low-power DAC still depends on clean, stable reference and supply rails. Place the required decoupling capacitors close to their associated pins, route analog outputs away from switching nodes, and implement the manufacturer-recommended reconstruction or anti-alias filter. Confirm the exact package drawing and exposed-pin arrangement against the current datasheet before ordering components.

This product page consolidates the verified part identity, packaging information, sourcing path, application guidance, and qualification questions for AK4352VT. It is intended to help engineers narrow the design quickly while preserving the need to verify exact electrical limits, pin functions, and layout instructions in the authoritative AK4352VT datasheet.

Drop-in alternatives for AK4352VT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AK4352VT (same form factor and footprint) — differing in Product Type.

AKM (Asahi Kasei Microdevices)
Product Type: Stereo audio digital-to-analog converter (DAC)
Compare with AK4352VT →

AK4351VT

✅ Drop-In
📦 [DATA_NEEDED: verified package]
Related AK4351 series with variation in specifications; exact parameter differences are

📋 Reference alternative (not in catalog)

AK4352VT-E2

✅ Drop-In
📦 [DATA_NEEDED: verified package]
Same base AK4352 device with an -E2 ordering suffix; exact temperature, packing, and marking differences are

📋 Reference alternative (not in catalog)

AK4393VM

✅ Drop-In
AKM (Asahi Kasei Microdevices)
📦 [DATA_NEEDED: verified package]
Stereo audio digital-to-analog converter (DAC) · 24 bit · 108 kHz · 2 channels · I2S · Advanced multi-bit delta-sigma modulator · 24 bit

Contact for price

View Datasheet →

AK4352VT Maximum Ratings & Electrical Characteristics

Product Type Multi-bit delta-sigma DAC
Rated Voltage 2 V
Power Class Low power
Mounting Type Surface mount
Packaging Tape & Reel

AK4352VT standard Pin Configuration Guide

Pin configuration for AK4352VT (standard package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

standard package pinout diagram for AK4352VT

No detailed pinout data available for AK4352VT.

Refer to the datasheet for full pin configuration.

Typical Applications

AK4352VT is suitable for 6 applications: Compact Digital Audio Player, Multimedia Audio Output, Digital Audio Interface Card, Consumer Audio Appliance, Portable Audio Accessory, Digital Recording Monitoring.

🎧

Compact Digital Audio Player

The AK4352VT fits a compact digital audio player where a dedicated 2 V, low-power DAC is needed to convert a digital source into an analog audio signal. Its documented multi-bit delta-sigma architecture places it in the final conversion stage between digital audio data and an analog headphone or line-output amplifier. The low-power characterization is particularly useful when the player must balance converter efficiency against audible-channel performance. Before layout, confirm the supported digital format, master-clock arrangement, output topology, and recommended reconstruction filter in the manufacturer datasheet. The PCB should reserve short, symmetric analog paths, local supply bypass capacitors, and a ground reference that remains quiet beneath the digital interface.

📱

Multimedia Audio Output

The AK4352VT is suitable for multimedia equipment that accepts digital audio and requires a dedicated low-power analog-output stage. Placing it after the system decoder or USB audio interface allows digital processing to remain isolated from the analog output path. The 2 V, low-power multi-bit DAC description makes the part relevant to space-constrained portable and consumer systems, although actual suitability depends on channel count, sampling-rate coverage, and dynamic-range targets. The implementation should separate digital clocks and data from sensitive analog traces, use the datasheet-recommended output network, and verify that the following amplifier accepts the DAC's output amplitude and common-mode behavior.

🖥️

Digital Audio Interface Card

An interface card can use the AK4352VT to create an analog monitoring output from a digital audio stream. This application benefits from isolating the low-power DAC's analog section from switching regulators and digital processors while still supporting a straightforward digital connection. Because the AK4352VT is categorized as a special-purpose multi-bit DAC, it can serve as the final bridge between digital transport and an external line amplifier. Confirm clock source compatibility, supported sample rates, output muting behavior, and bypass requirements. Keep the analog trace short, place filtering close to the output, and provide a stable return path that avoids sharing high-current switching-node ground routes.

📺

Consumer Audio Appliance

The AK4352VT can serve as the digital-to-analog stage in a compact consumer audio appliance that needs low-power conversion from a digital playback subsystem. Its multi-bit delta-sigma implementation suits an audio signal path requiring a dedicated output converter rather than relying on a mixed-signal codec. The design must still verify output-channel configuration, signal format, supply rails, and distortion targets against the appliance's acoustic requirements. Use a clean analog supply or filtered supply rail where practical, place the required capacitors at the DAC pins, and route the reconstructed analog output directly toward the output amplifier to minimize added noise and board-space overhead.

🔋

Portable Audio Accessory

A portable audio accessory can use the AK4352VT where a 2 V, low-power multi-bit DAC provides the transition from stored or transmitted digital audio to an analog output stage. The low-power device is especially relevant to battery-powered accessories in which converter efficiency affects usable runtime. Exact suitability still depends on whether the accessory needs mono, stereo, or multi-channel output and on the required digital-audio protocol. Keep the converter's digital clock and data routing away from the analog output, validate startup behavior during battery transitions, and select the external output-filter components directly from the manufacturer application circuit rather than reusing another DAC's network.

🎙️

Digital Recording Monitoring

The AK4352VT can be evaluated for a digital recording monitor that converts digital audio into an analog monitoring signal. Such a design benefits from a dedicated converter stage whose 2 V, low-power multi-bit architecture separates playback-format decoding from the monitoring amplifier. Verification should include supported sampling rates, digital clocking, channel mapping, full-scale output level, and the required reconstruction filter. The analog output path should avoid digital return currents and maintain controlled impedance into the next stage. If the monitoring system also performs conversion in the opposite direction, evaluate the AK5383VS as a companion audio-converter option while keeping each device's clocking and grounding requirements independent.

What is the AK4352VT?
The AK4352VT is a 2 V, low-power, multi-bit delta-sigma digital-to-analog converter from Asahi Kasei Microdevices. It converts digital audio information into an analog output and is categorized as a special-purpose ADC/DAC integrated circuit. The manufacturer-oriented product records also identify the part in tape-and-reel packaging for high-volume surface-mount assembly. Confirm the detailed electrical limits and pin arrangement in the current AK4352VT datasheet before finalizing a circuit.
Where can I download the AK4352VT datasheet PDF?
The AK4352VT datasheet PDF is available from the electronic-document link identified for this part and through the Asahi Kasei product resources. The direct AK4352VT document link on this page provides access to the manufacturer datasheet mirror. Use the document labeled for AK4352VT to verify the pinout, electrical characteristics, application circuit, recommended filtering, and package drawing. Do not infer an unlisted pin function from a related DAC in the same family.
What are the key specifications of AK4352VT that engineers should know?
The principal documented characteristics of the AK4352VT are its 2 V rating, low-power operation, multi-bit delta-sigma DAC architecture, and tape-and-reel packaging. The device is intended for digital-to-analog conversion in audio and other special-purpose signal-processing systems. Resolution, channel count, sampling rate, distortion, dynamic range, clock limits, supply range, and pin count are not exposed in the retrieved product text, so engineers should treat the manufacturer datasheet as the controlling source for those details.
What is the AK4352VT pinout and package?
The exact AK4352VT package dimensions and pin assignment are not stated in the retrieved product listing, so the pinout must be taken from the manufacturer datasheet before PCB routing. Use its pin-description table to identify analog outputs, digital audio inputs, clock-related terminals, power rails, ground connections, and any reserved or test pins. Package identification is also important because the correct land pattern and pin-one orientation determine assembly reliability. Do not substitute a visually similar DAC footprint without verifying every terminal.
Where to buy AK4352VT online?
The most direct sourcing path for AK4352VT is the Request a Quote form on this page, where the exact manufacturer part number and desired quantity can be submitted for current availability and lead-time review. The part is also listed in the verified distributor records under the ordering code 974-AK4352VTTR-ND. Because inventory and commercial terms can change, request a current quotation rather than relying on a historical stock indication. The quote should also confirm the tape-and-reel configuration and delivery target.
What is the price of AK4352VT?
Use the Request a Quote form on this page to obtain the current commercial quotation for AK4352VT. The verified distributor results expose the ordering code and product identity but do not provide an explicit quantity-break price table for this exact suffix. Therefore, no unit price is asserted on this page. A quotation can confirm the requested quantity, reel configuration, delivery schedule, and any volume pricing applicable to the exact AK4352VT ordering code.
What is the lead time for AK4352VT?
The current lead time for AK4352VT should be confirmed through the Request a Quote form on this page. The retrieved distributor records establish that AK4352VT is an orderable catalog part and show the tape-and-reel ordering designation, but they do not state a fixed manufacturing or delivery interval. When requesting a quotation, include your required quantity, target ship date, and approved manufacturing schedule so the supplier can validate availability without creating an unsupported lead-time estimate.
Is AK4352VT in stock?
AK4352VT is identified as an orderable part in the verified distributor records, but a guaranteed stock quantity is not established for your location and delivery date. Submit the exact part number and required reel quantity through the Request a Quote form on this page for a current stock confirmation. The ordering designation shown in the records is 974-AK4352VTTR-ND. Treat any general availability message as informational rather than a production allocation, particularly when the build schedule cannot tolerate substitution.
When should I choose AK4352VT over a related AKM DAC?
Choose the AK4352VT when the design specifically calls for a 2 V, low-power multi-bit DAC and its exact interface, channel count, and performance ratings match the system requirements. A related AKM family member may be preferable only when its datasheet confirms equivalent digital behavior, compatible supply sequencing, equivalent pin mapping, and acceptable distortion and dynamic-range performance. Similar audio functionality alone is not sufficient for a drop-in decision; verify the land pattern and every electrical connection.
Can AK4351VT replace AK4352VT?
The AK4351VT is identified in the cross-reference material as a related AKM alternative, but the retrieved record does not confirm the AK4352VT package, pin mapping, interface timing, or full electrical equivalence. A replacement is therefore conditional rather than guaranteed. Compare both manufacturer datasheets for footprint, pin functions, supply voltage, digital interface, clocking, output topology, and filtering requirements before approving AK4351VT as a drop-in substitute for AK4352VT.
What is the best drop-in replacement for AK4352VT?
No drop-in replacement for AK4352VT can be confirmed from the available records. The AK4351VT appears as a related same-manufacturer candidate, while the AK4352VT-E2 record is a suffix variant, but neither source establishes complete pin-to-pin and electrical equivalence with AK4352VT. For production continuity, compare the exact package drawing, pin table, supply rails, digital audio interface, supported sampling rates, and analog-output circuitry before designating any replacement as drop-in.
Is AK4352VT suitable for low-power audio equipment?
The AK4352VT is explicitly identified as a 2 V, low-power multi-bit DAC, making it a logical candidate for compact audio equipment that cannot support a high-power converter. Suitability also depends on channel count, supported digital format, sampling rate, output topology, and system noise requirements. Use the datasheet's recommended application circuit and filter network, and compare its measured dynamic range and distortion with the target audio specification before committing to the design.
What should I check before designing with AK4352VT?
Before designing with AK4352VT, verify the exact package and land pattern, complete pin table, supply-voltage limits, digital-audio interface format, master-clock requirements, supported sampling rates, analog-output configuration, and recommended external components. Also evaluate startup sequencing, bypass-capacitor placement, output-filter design, grounding, and the relationship between the DAC output and the following amplifier stage. These checks prevent footprint errors and ensure the low-power audio architecture meets the intended signal path.
How does AK4352VT compare with AK4393VM?
AK4352VT and AK4393VM are both Asahi Kasei audio DAC devices, but the retrieved comparison result does not provide enough verified detail to claim they are drop-in equivalents. Their package, resolution, architecture, supply requirements, channel count, and interface behavior must be compared directly. Treat AK4393VM as a redesign candidate unless its manufacturer datasheet confirms the same footprint and pin-level functionality. This distinction is important because different DAC families often require different clocking and filtering arrangements.

Engineering reference data for AK4352VT — comparison, design guidance, and compliance information.

Selection Guide

Choose AK4352VT when the design requires a dedicated 2 V, low-power multi-bit DAC and its verified interface, channel arrangement, package, and performance characteristics satisfy the target system. The AK4351VT should be considered only after its datasheet confirms the same footprint, pin functions, supply requirements, clocking, and signal behavior. AK4352VT-E2 may suit procurement or production requirements that differ by ordering suffix, but the exact environmental and packing conditions must be checked. AK4393VM belongs to a different or more specialized AKM DAC family and should be selected only when its electrical and package characteristics are preferable and a PCB or firmware adjustment is acceptable. For all candidates, treat the manufacturer datasheet as the final authority and use the Request a Quote form for current commercial availability.

Comparison with Alternatives

Parameter This Product AK4351VT AK4352VT-E2 AK4393VM
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices
Product Type Multi-bit delta-sigma DAC DAC Multi-bit DAC Audio DAC

Key Differentiators

  • Documented 2 V low-power DAC positioning (vs AK4393VM)
  • Exact ordering configuration available for production assembly (vs AK4351VT)
  • Purpose-built special-purpose DAC classification (vs AK4352VT-E2)

Design Notes

Confirm the AK4352VT package drawing, pin-one location, and exposed-pad requirements against the manufacturer datasheet before releasing artwork. Keep the digital audio data and clock routes away from the analog outputs, place the manufacturer-recommended bypass capacitors directly at their associated supply pins, and provide a continuous, low-impedance ground path. Incorrect footprint interpretation is a critical risk because the retrieved product record does not identify the package or pin count.

Use only the reconstruction or anti-alias filter specified for AK4352VT, and place its components close to the analog output pins. Verify that the following amplifier or line driver presents the expected input impedance and that the output amplitude falls within the system budget. Route the analog output as a short, controlled-impedance trace over a quiet ground plane, and avoid sharing return paths with switching-regulator high-current pulses.

Design the 2 V supply rail with enough decoupling and sequencing margin for the converter's digital and analog sections. Check startup order, load transients, and the behavior of the analog output during power transitions. If the DAC shares a rail with digital switching circuitry, use suitable filtering and local bypass capacitance so converter performance is not determined by upstream ripple or supply impedance.

Do not approve a replacement solely because it is described as a similar AKM DAC. Verify the exact footprint, pin assignments, supply voltage, digital interface, clocking, channel count, output level, and required external filter. The AK4351VT and AK4393VM are related candidates, but their functional similarity alone does not establish pin-to-pin compatibility with AK4352VT.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The retrieved product and distributor text does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AK4352VT is an audio IC rather than an automotive-qualified device, so AEC-Q100 is marked not applicable.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

AK4352VT datasheet AK4352VT datasheet pdf AK4352VT pinout AK4352VT equivalent AK4352VT replacement AK4352VT cross reference AK4352VT schematic AK4352VT application circuit AK4352VT footprint AK4352VT price AK4352VT stock Asahi Kasei AK4352VT AK4352VT vs AK4393VM AK4352VT low power audio DAC

Related Components & Terms

Asahi Kasei Microdevices AK4352VT AK4351VT AK4352VT-E2 AK4393VM multi-bit DAC delta-sigma DAC digital-to-analog converter ADC/DAC audio converter special-purpose integrated circuit semiconductor 2 V low-power DAC analog output digital audio interface master clock sampling rate dynamic range THD+N signal-to-noise ratio reconstruction filter surface-mount integrated circuit tape and reel audio signal chain Asahi Kasei AKM
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details