AKM (Asahi Kasei Microdevices)

AK4421AET - 24-Bit Stereo DAC with 2Vrms Output | AKM

MPN: AK4421AET ✗ End of Life
3.3 V Vdss TSSOP-16 Package
MOQ: 1 |

AK4421AET Overview

The Asahi Kasei Microdevices AK4421AET is a 24-bit, two-channel stereo digital-to-analog converter supporting sampling rates up to 192 kHz and producing a 2 Vrms output through an integrated output buffer. The device is packaged in a 16-pin TSSOP measuring approximately 6.40 mm by 5.00 mm with a 0.65 mm lead pitch, and it operates from a 3.3 V supply.

A digital-to-analog converter, or DAC, converts multi-bit digital audio samples into proportional analog voltages or currents. A stereo DAC maintains two independent signal paths for left and right channels. The AK4421AET belongs to the DAC hierarchy within data-conversion and signal-processing semiconductors, combining a digital audio interface, reconstruction functions, and an integrated analog output stage in one package.

The principal features include 24-bit resolution, two-channel operation, a maximum sample rate of 192 kHz, and a 2 Vrms full-scale output. The integrated output buffer supports ground-referenced operation by developing an internal negative supply rail with a charge pump. This architecture lets the converter produce a symmetrical analog output without requiring a separate bipolar output amplifier or negative supply in a conventional line-output circuit.

The AK4421AET is intended for digital audio systems requiring more resolution or a higher sample rate than conventional CD-oriented converters provide. Its 192 kHz capability accommodates professional audio, studio monitoring, consumer playback equipment, and other systems processing high-resolution PCM streams. The 2 Vrms output level is relevant when the analog stage is designed for a consumer line-level signal rather than a low-voltage headphone-driver load.

Typical uses include stereo DAC boards, compact digital audio players, USB audio interfaces, network-audio terminals, and multimedia equipment. Its integrated buffer simplifies the output topology, while the charge pump reduces the need for external negative-rail generation. The digital interface and analog output still require careful partitioning so that switching activity, clock edges, and ground currents do not degrade audio quality.

Layout should keep the device close to the digital interface and output network, with short return paths for analog signals. Decoupling should follow the capacitor recommendations in the manufacturer datasheet. Because the converter is not intended to drive headphones directly, an appropriate line-output or speaker-amplifier stage is normally required when the load differs from the intended analog interface.

This page combines the documented AK4421AET operating characteristics, package information, application guidance, and replacement assessment to support PCB design, sourcing, and end-of-life planning. The key replacement constraint is stricter than electrical similarity: a useful substitute must preserve the TSSOP-16 footprint, pin assignment, interface behavior, and output-buffer characteristics, not merely advertise a similar resolution and sample rate.

Drop-in alternatives for AK4421AET — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

AK4421A

✅ Drop-In
📦 TSSOP-16
Family-level ordering code; resolution remains 24 bit, maximum sample rate remains 192 kHz, and output remains 2 Vrms, but the exact suffix configuration must be confirmed against the manufacturer datasheet.

📋 Reference alternative (not in catalog)

AK4421ET

✅ Drop-In
AKM (Asahi Kasei Microdevices)
📦 TSSOP-16
24-bit stereo digital-to-analog converter · 3.3 V · 24 bit · 192 kHz · 2 channels · Stereo · 2 Vrms · 102 dB

Contact for price

View Datasheet →

AK4421AET Maximum Ratings & Electrical Characteristics

Product Type 24-bit stereo digital-to-analog converter
Number of Channels 2 channels
Bit Resolution 24 bit
Maximum Sample Rate 192 kHz
Supply Voltage 3.3 V
Full-Scale Output 2 Vrms
Output Buffer Integrated
Internal Negative Rail Charge-pump generated
Output Reference Ground referenced
Package Type TSSOP-16
Package Body Size 6.40 mm x 5.00 mm
Lead Pitch 0.65 mm
Mounting Type Surface mount
Operating Temperature -20 °C to +85 °C
Lead-Free Status Lead-free
Packaging Form Tape and reel

AK4421AET 6.40 mm x 5.00 mm Pin Configuration Guide

Pin configuration for AK4421AET (6.40 mm x 5.00 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

6.40 mm x 5.00 mm package pinout diagram for AK4421AET

No detailed pinout data available for AK4421AET.

Refer to the datasheet for full pin configuration.

Typical Applications

AK4421AET is suitable for 6 applications: Professional USB Audio Interface, High-Resolution Network Audio Player, Digital Audio Player, Studio Monitor DAC, Multimedia Amplifier Front End, Digital Audio Development Platform.

🖥️

Professional USB Audio Interface

The AK4421AET fits a professional USB audio output path that converts 24-bit PCM audio into a ground-referenced analog line signal. Its 192 kHz maximum sample rate supports high-resolution studio playback, while the 2 Vrms integrated-buffer output provides a useful consumer line-level amplitude without a separate negative rail. In practice, the converter is placed between the USB audio interface controller and the balanced or unbalanced line-output stage. The key design consideration is isolation between digital switching currents and the analog output reference. Use short, symmetric output routing, follow the recommended decoupling arrangement, and verify the interface controller's required master-clock and I2S format before finalizing the board.

🌐

High-Resolution Network Audio Player

The AK4421AET is appropriate for a network-audio terminal that accepts high-resolution digital streams and requires a high-quality stereo analog output. Its 24-bit conversion capability and 192 kHz sample-rate ceiling cover source material exceeding 48 kHz, while the integrated 2 Vrms buffer simplifies the analog path around the digital receiver. The converter should be placed close to the digital audio processor and line-output stage to minimize trace susceptibility to digital coupling. The main trade-off is that a 2 Vrms line-level output does not directly provide the voltage swing and current required for low-impedance headphones, so a separate amplifier is normally preferable.

📱

Digital Audio Player

The AK4421AET can serve as the final conversion stage in a compact digital-audio player that accepts I2S or compatible digital audio and drives a line-level amplifier. Its 24-bit resolution preserves source word depth, the 192 kHz rate supports high-resolution files, and the integrated output buffer removes the need for a discrete line-output stage. The charge-pump-generated negative rail allows symmetrical ground-referenced output from the 3.3 V analog supply. Placement should prioritize a quiet analog return path and short output traces. If the player must feed a line input directly, confirm output loading and DC-offset behavior against the manufacturer electrical characteristics before production.

🎧

Studio Monitor DAC

The AK4421AET is suited to a stereo studio-monitor DAC when the design requires high-resolution conversion and a 2 Vrms source level. Its 192 kHz capability accommodates professional playback formats, while the ground-referenced output can feed a balanced or unbalanced monitor-driver input through the appropriate stage. The integrated buffer reduces component count, but it does not replace careful analog design. Keep digital, clock, and switching-supply paths away from the DAC outputs, maintain a continuous analog ground reference, and follow the manufacturer’s application circuit for component placement and decoupling. The output stage must still be selected for the intended monitor input impedance and gain structure.

📺

Multimedia Amplifier Front End

The AK4421AET can provide the stereo DAC function upstream of a multimedia power amplifier in a compact audio system. Its 24-bit interface and 192 kHz capability are useful when the system receives high-resolution digital audio, while the 2 Vrms output is appropriate for many line-level amplifier inputs. Using the integrated output buffer simplifies the schematic, although output-current capability and stability must be checked against the selected amplifier input. Place the DAC and analog output network away from display, motor, and power-amplifier switching nodes. A short output route and a quiet return path are especially important when the source volume can approach full scale.

🔧

Digital Audio Development Platform

The AK4421AET is useful for a dedicated digital-audio evaluation board because it combines a 24-bit stereo converter, 192 kHz operation, and an integrated 2 Vrms output buffer in a 16-pin TSSOP. The platform can accept PCM data from an FPGA, MCU, or audio interface and provide a line-level analog output for measurement or comparison with another converter. Expose the digital interface, master clock, reset, and analog output on accessible test points to simplify firmware and hardware debugging. Decouple each supply domain as directed by the manufacturer datasheet and provide enough board area around the TSSOP-16 for inspection and rework, particularly if the system may later migrate to an obsolete-stock sourcing strategy.

What is the AK4421AET?
The AK4421AET is a 24-bit, two-channel stereo digital-to-analog converter from Asahi Kasei Microdevices. It supports operation up to 192 kHz and uses an integrated output buffer to provide a ground-referenced 2 Vrms signal from a 3.3 V supply. The manufacturer datasheet identifies the device as a high-resolution audio DAC suitable for professional and consumer digital-audio equipment.
What are the key specifications of AK4421AET that engineers should know?
The AK4421AET combines 24-bit resolution, two stereo output channels, a maximum sample rate of 192 kHz, and a 2 Vrms integrated-buffer output. It operates from 3.3 V and uses an internal charge pump to establish the negative rail needed for ground-referenced output. The physical implementation is a lead-free 16-pin TSSOP measuring 6.40 mm by 5.00 mm with a 0.65 mm pitch.
Where can I download the AK4421AET datasheet PDF?
The AK4421AET datasheet can be reached through the linked datasheet PDF page, which identifies the document as a 19-page manufacturer datasheet for the 192 kHz, 24-bit stereo DAC with 2 Vrms output. Use the pin-description, electrical-characteristics, application-circuit, and recommended-layout sections when designing or replacing the device.
Where is the AK4421AET pinout?
The AK4421AET uses a 16-pin TSSOP package, but a complete numbered pin description could not be safely reconstructed from the available product summaries. Use the pin-configuration table in the manufacturer datasheet before assigning tracks or selecting a replacement. A substitute should not be treated as drop-in unless every power, ground, clock, data, and analog-output pin has been checked against that table.
Does the AK4421AET require a negative power supply?
The AK4421AET does not require an external negative supply for its 2 Vrms ground-referenced output. Its integrated output-buffer charge pump develops an internal negative power rail, allowing the converter to operate from a single 3.3 V supply. This simplifies system power design, although decoupling and analog return-path layout remain important for preserving output quality.
Is the AK4421AET suitable for a 192 kHz audio interface?
Yes, the AK4421AET supports a maximum sample rate of 192 kHz. Its 24-bit stereo architecture is therefore suitable for high-resolution digital-audio paths that exceed conventional 44.1 kHz and 48 kHz CD or broadcast rates. Confirm the supported digital-interface mode and master-clock requirements in the manufacturer datasheet for the specific source device.
Can the AK4421AET drive headphones directly?
The AK4421AET is a line-level DAC with a 2 Vrms integrated output, so it should not automatically be treated as a headphone driver. Headphones generally present a low impedance that can demand more current than the converter is designed to supply. Use the datasheet output-loading limits to determine whether a line-output or headphone-amplifier stage is required.
AK4421AET vs AK4421ET - which is the better replacement?
The AK4421AET is the 24-bit stereo DAC with an integrated 2 Vrms output buffer, while AK4421ET is a closely related family member. Replacement suitability depends on identical package dimensions, pin assignment, interface mode, clocking, output amplitude, and power sequencing. The manufacturer datasheet comparison is required before treating AK4421ET as a direct substitute.
What is the difference between AK4421A and AK4421AET?
AK4421A identifies the converter family, while AK4421AET identifies the orderable 16-pin TSSOP configuration. The ordering suffix determines the physical package and delivery format rather than changing the core 24-bit, 192 kHz stereo-converter function. When comparing an AK4421A-family device, verify the exact suffix because package, temperature, and packing options can differ.
When should I choose the AK4421AET instead of another stereo DAC?
Choose the AK4421AET when the design needs a 24-bit stereo conversion path, operation up to 192 kHz, and a ground-referenced 2 Vrms line output from 3.3 V. Its integrated buffer and charge pump reduce the external analog-output circuitry. A different converter is preferable when the system requires lower power, a different digital interface, balanced outputs, or a load capability beyond the AK4421AET output stage.
What can replace the AK4421AET?
A valid replacement for the AK4421AET must fit the same 16-pin TSSOP footprint and preserve the complete pin function, digital interface, clock requirements, supply behavior, and 2 Vrms output architecture. AK4421A-family devices are the closest candidates, but each exact suffix requires comparison with the manufacturer pinout. No unrelated TSSOP audio codec should be treated as a drop-in replacement without that review.
What is the best drop-in replacement for AK4421AET?
The closest drop-in candidates are exact package and pin-compatible members of the AK4421A family, but a replacement should be accepted only after comparing the manufacturer datasheets pin by pin. Resolution and sample rate alone are insufficient: a substitute must also match the 3.3 V supply, interface mode, clocking, output amplitude, loading capability, and shutdown behavior.
Is the AK4421AET still in production?
The AK4421AET is identified as obsolete, although legacy inventory can remain available for a limited period. For new production designs, verify lifecycle status with the manufacturer and use the Request a Quote form on this page to confirm whether an exact, traceable AK4421AET shipment can be allocated. For long-lived products, assess an approved lifecycle alternative rather than relying on obsolete stock.
Where can I buy AK4421AET online?
Use the Request a Quote form on this page to request AK4421AET availability, condition, packaging, lot traceability, and lead time for your required quantity. Because the AK4421AET is an obsolete part, exact stock and sourcing conditions can change quickly. Confirm authorized supply, date codes, and inspection requirements before placing a production order.
What is the price of AK4421AET?
The AK4421AET price depends on quantity, condition, date code, packaging, and traceability requirements, particularly because the device is obsolete. Submit the required quantity and part condition through the Request a Quote form on this page for a current quotation. The platform can then respond with the applicable commercial terms without embedding a stale price in technical guidance.
What is the lead time for AK4421AET?
The lead time for an obsolete AK4421AET depends on remaining factory inventory, allocation, inspection requirements, and whether a specific date code is requested. Use the Request a Quote form on this page and state the quantity, packaging, lot-control requirements, and required delivery date. These details allow the sourcing team to confirm the current schedule.

Engineering reference data for AK4421AET — comparison, design guidance, and compliance information.

Selection Guide

Choose the AK4421AET when the design requires a 24-bit stereo DAC operating up to 192 kHz, a 3.3 V supply, and a ground-referenced 2 Vrms line-level output. Its integrated output buffer and charge pump reduce the number of external analog-output components, making it suitable for USB audio, studio-monitor, network-player, and multimedia designs. Do not select it for direct low-impedance headphone operation unless the load limits are verified and an additional amplifier stage is provided. When considering AK4421A or AK4421ET, compare the exact manufacturer pinout, interface mode, clocking, output amplitude, and ordering suffix. Because the AK4421AET is obsolete, choose a replacement only after confirming lifecycle, traceability, and long-term supply requirements rather than relying on a generic cross-reference match.

Comparison with Alternatives

Parameter This Product AK4421A AK4421ET
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices
Package TSSOP-16, 6.40 mm x 5.00 mm, 0.65 mm pitch TSSOP-16 configuration requires suffix verification TSSOP-16
Resolution 24 bit 24 bit 24 bit
Channels 2 channels 2 channels 2 channels
Maximum Sample Rate 192 kHz 192 kHz 192 kHz

Key Differentiators

  • Supports high-resolution stereo playback (vs AK4421AET)
  • Integrated 2 Vrms output stage (vs AK4421ET)
  • Single 3.3 V analog supply implementation (vs AK4421A)

Design Notes

Place the AK4421AET close to the digital audio source and analog output network. Keep the TSSOP-16 on a quiet analog section of the PCB, while routing clock and data lines away from the 2 Vrms outputs. Use a continuous ground plane without splitting the ground beneath the converter, and join analog and digital returns at a stable location according to the manufacturer application circuit. Short traces reduce capacitive coupling from digital switching edges.

Use separate local decoupling paths for the digital and analog supply pins, with each capacitor placed directly beside its corresponding pin. Follow the manufacturer’s capacitor values and ESR requirements rather than selecting capacitors solely by nominal capacitance. The 3.3 V supply must also have adequate transient capability for the converter and any associated output stage. A clean supply prevents switching ripple from appearing directly in the analog output.

Treat the digital interface and analog output as separate signal paths even though both enter the same TSSOP-16 package. Match clock and data timing to the supported interface mode, provide a continuous return beneath high-speed routes, and avoid routing the analog outputs beside clocks, inductors, or power-switching nodes. Confirm output loading and stability against the electrical characteristics before adding cable capacitance or an external amplifier input.

Do not use AK4421A, AK4421ET, or another family member as a drop-in replacement solely because it is also described as a 24-bit stereo DAC. Compare every pin, including supply, ground, clock, serial-data, mute, and analog-output functions. The AK4421AET is obsolete, so an engineer-facing replacement plan should also account for traceability, date-code requirements, and the risk of production demand exceeding remaining factory inventory.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The part is identified as a lead-free TSSOP-16. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material declaration.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

AK4421AET datasheet AK4421AET datasheet pdf AK4421AET pinout AK4421AET specifications AK4421AET equivalent AK4421AET replacement AK4421AET cross reference AK4421AET vs AK4421ET AK4421AET TSSOP-16 footprint AK4421AET 192kHz stereo DAC AK4421AET 2Vrms output AK4421AET application circuit AK4421AET price AK4421AET stock Asahi Kasei AK4421AET

Related Components & Terms

Asahi Kasei Microdevices AK4421AET AK4421A AK4421ET 24-bit DAC stereo digital-to-analog converter data-conversion IC signal-processing semiconductor I2S digital audio PCM audio 192 kHz sample rate 24-bit resolution 2 Vrms output integrated output buffer charge pump internal negative rail ground-referenced output TSSOP-16 TSSOP package family surface-mount package SMD USB audio interface digital audio player studio monitor lead-free
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details