ATR2732-40DEV-KIT1 - DAB/COM Front-End Eval Kit | Microchip
MPN: ATR2732-40DEV-KIT1 β Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
ATR2732-40DEV-KIT1 Overview
An RF evaluation kit of this type belongs to the broader hierarchy of development boards and modules: it is a development board tool, specifically an RF evaluation and development kit, used to prototype and validate a receiver front-end IC before committing to a custom PCB design. Evaluation kits typically expose the RF inputs, power rails, and control interfaces (such as SPI or I2C) of the target device so engineers can measure sensitivity, blocking, adjacent-channel rejection, and audio output quality.
Key characteristics of the ATR2732-40DEV-KIT1 include support for the ATR2740 and ATR2732 front-end devices, operation across the 1.452 GHz to 1.492 GHz DAB Band III L-band adjacent frequency range associated with the COM ensemble, and its role as a complete evaluation platform rather than a bare IC. Because it is a kit, its 'package' is a board-level assembly with connectors and test points rather than a semiconductor package.
Typical applications include DAB/DAB+ radio receiver development, digital radio front-end sensitivity characterization, firmware and tuner-control driver development, and EMC or antenna-matching experimentation in automotive infotainment and consumer radio designs.
A key design consideration: confirm that your host system can supply the required control interface and power to the board, and consult the Microchip ATR2732/ATR2740 documentation for register-level control of the front-end during evaluation.
This page synthesizes distributor listings, verified specifications, and sourcing guidance for the ATR2732-40DEV-KIT1 in one place - information normally spread across Mouser, DigiKey, and third-party distributor sites.
Drop-in alternatives for ATR2732-40DEV-KIT1 β same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool β Select alternative parts for side-by-side comparison:
No drop-in alternatives available for this product.
Request AlternativesATR2732-40DEV-KIT1 Specifications (manufacturer-published)
| Product Type | RF Evaluation and Development Kit |
| Kit Category | Audio IC Development Tools |
| Front-End Type | Digital Radio (DAB/COM) Front End |
| Frequency Range | 1.452 GHz to 1.492 GHz |
| Supported Devices | ATR2740, ATR2732 |
| Broadcast Standard | DAB / DAB+ (COM ensemble) |
| MSL Level | Not applicable (board-level kit) |
| For Use With | ATR2732 / ATR2740 front-end ICs |
ATR2732-40DEV-KIT1 Interfaces & Connectors
No manufacturer-published interface list is available for ATR2732-40DEV-KIT1. Refer to the manufacturer documentation for connector and header details.
Refer to the manufacturer documentation for the full expansion header pinout and connector pin numbering.
Typical Applications
ATR2732-40DEV-KIT1 is suitable for 6 applications: DAB/DAB+ Receiver Development, Automotive Infotainment Radio Design, RF Front-End Sensitivity Characterization, Tuner Control Firmware Development, Antenna Matching and EMC Experimentation, Consumer Portable DAB Radio Design.
DAB/DAB+ Receiver Development
The ATR2732-40DEV-KIT1 provides the reference hardware for developing DAB and DAB+ receivers using the Microchip ATR2732/ATR2740 front-end ICs. Its 1.452 GHz to 1.492 GHz coverage matches the COM ensemble allocation, letting engineers inject live or test RF signals and measure front-end sensitivity, blocking, and adjacent-channel performance against the exact silicon intended for production. Used on the bench with a signal generator or live antenna, the kit shortens the path from front-end characterization to a first production PCB, because layout, decoupling, and control-firmware assumptions can all be validated on the reference design before committing to tooling.
Recommended
Automotive Infotainment Radio Design
Automotive head-unit and infotainment teams use the ATR2732-40DEV-KIT1 to validate digital radio reception performance before integrating the ATR2732/ATR2740 front-end into a vehicle platform. Automotive RF environments impose strict requirements on sensitivity, interference rejection from mobile services near the 1.452 GHz to 1.492 GHz band, and thermal behavior. The evaluation kit allows these measurements early, with accessible test points and standard RF connectors, so antenna choice, filtering, and shielding strategies can be settled at the reference-design stage. This reduces the risk of late-stage EMC or reception failures discovered only during vehicle-level testing.
Recommended
RF Front-End Sensitivity Characterization
Lab engineers use the kit to perform quantitative RF characterization of the ATR2732/ATR2740 front-end family: noise figure estimation, blocking and intermodulation tests, and selectivity sweeps across the 1.452 GHz to 1.492 GHz input band. Because the kit is a vendor reference design, its measured results are directly comparable to Microchip's published device data, providing a trusted baseline. Typical workflow: connect a calibrated RF signal generator to the antenna input, control the front-end registers through the kit's host interface, and record IF/baseband output quality. Results feed directly into production receiver specification sheets and acceptance-test criteria.
Recommended
Tuner Control Firmware Development
Firmware teams developing tuner-control drivers use the ATR2732-40DEV-KIT1 as the hardware target for bring-up of I2C/SPI register-level control code for the ATR2732/ATR2740 front-end. The kit exposes the front-end's control interface so channel tuning, gain settings, AGC behavior, and calibration routines can be exercised and debugged with a logic analyzer attached. Validating driver behavior on the reference board - rather than on a first-turn production PCB - eliminates layout uncertainties from the debugging equation. Code developed against the kit typically ports to the production design with only address or pin-mapping changes, accelerating time to first working radio.
Recommended
Antenna Matching and EMC Experimentation
The kit serves as a stable platform for antenna matching and EMC pre-compliance work in the 1.452 GHz to 1.492 GHz DAB band. Engineers attach candidate active or passive antennas, iterate on matching-network components at the RF input, and observe the impact on received signal quality using the front-end's own demodulation or via external instruments. Because the board is a known-good reference layout, changes in performance can be attributed to the antenna and matching changes rather than board variations. This shortens the iteration loop for automotive shark-fin antennas and consumer DAB antennas where band-edge performance is often the limiting factor.
Recommended
Consumer Portable DAB Radio Design
Consumer radio manufacturers evaluating DAB capability use the ATR2732-40DEV-KIT1 to de-risk the RF portion of portable and tabletop DAB products. The kit's coverage of the 1.452 GHz to 1.492 GHz COM band and its support for both the ATR2732 and ATR2740 devices let a single evaluation effort serve multiple product tiers. Bench work typically includes verifying reception with low-cost antennas, measuring current consumption at various gain settings to project battery life, and confirming audio output quality ahead of the full baseband integration. Findings from the kit directly inform component selection and antenna placement in the industrial-design-constrained enclosure.
Recommended
Recommended Products Summary
Engineering reference data for ATR2732-40DEV-KIT1 β comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | Board-level evaluation kit (no IC package) |
| Brand | Microchip Technology |
| Product Type | RF Evaluation and Development Kit (Front End) |
| Frequency Range | 1.452 GHz to 1.492 GHz |
| Supported Devices | ATR2740, ATR2732 |
| Application Domain | DAB/DAB+ (COM) digital radio front-end evaluation |
| Category (Distributor) | Audio IC Development Tools |
Key Differentiators
- Dual-device support (vs Single-IC evaluation boards)
- Exact COM-band coverage (vs Generic SDR platforms)
- Vendor reference-design fidelity (vs Self-built test fixtures)
Design Notes
Before ordering, confirm the exact supplied contents of the ATR2732-40DEV-KIT1: distributor specification tables list 'Supplied Contents' as not detailed, so verify with Microchip whether power supplies, antennas, cables, and host-interface adapters are included. Ordering a kit expecting a complete bench setup and receiving a bare board is the most common sourcing complaint for niche evaluation platforms.
When characterizing the front-end in the 1.452 GHz to 1.492 GHz band, use calibrated RF cables and torque the RF connectors to specification; at these frequencies even small connector mismatches introduce measurement uncertainty that can mask true sensitivity differences between front-end gain settings. Keep the kit away from switching supplies and USB host noise during sensitivity tests.
Verify the kit's supply-voltage requirements from the Microchip kit user guide before first power-up, and supply it from a clean lab bench supply rather than a shared rail. Front-end evaluation results (sensitivity, phase noise contribution) are sensitive to supply ripple; a noisy bench supply can degrade measured performance by enough to wrongly reject the front-end IC in comparison testing.
Compliance Information
Compliance data not published in the verified distributor specification tables for this evaluation kit; request compliance documentation with your quote.