Cirrus Logic Inc.

CS4382-KQZ - 8-Channel 24-Bit 192kHz Audio DAC | Cirrus Logic

MPN: CS4382-KQZ ✓ Active
48-LQFP Package
MOQ: 1 |

CS4382-KQZ Overview

The Cirrus Logic CS4382-KQZ is an eight-channel, 24-bit digital-to-analog converter with support for sampling rates up to 192 kHz and direct support for PCM and DSD audio data. It provides 114 dB dynamic range, -100 dB THD+N, fifth-order delta-sigma conversion, digital interpolation, digital de-emphasis, volume control, and analog filtering in a 48-LQFP package.

An audio DAC is a mixed-signal semiconductor that reconstructs continuous analog output from digital audio samples. Within the signal-chain hierarchy, the CS4382-KQZ is an audio DAC, a digital-to-analog converter, and an audio interface IC. It sits between a digital audio source and the analog output stage of a multichannel sound system, where accurate conversion, low distortion, channel synchronization, and flexible filtering determine signal quality.

The converter supports 24-bit PCM and DSD formats at sample rates up to 192 kHz. Selectable digital filters allow the system designer to balance frequency-domain response against latency, while volume control with a soft ramp helps avoid abrupt output-level changes. Its eight-channel architecture reduces the number of separate converter packages required in surround-sound and professional audio equipment while maintaining a common eight-channel output architecture.

Internally, the CS4382 uses digital interpolation followed by fifth-order delta-sigma digital-to-analog conversion. The delta-sigma architecture shapes quantization noise away from the audio band, while the integrated analog filtering stage removes switching images and provides the final balanced or single-ended output interface defined by the device configuration. A 114 dB dynamic range and -100 dB total harmonic distortion plus noise characterize the converter's high-fidelity performance.

Typical uses include 7.1-channel home-theater receivers, professional monitoring consoles, multichannel digital mixers, surround-sound decoders, and high-end playback systems. It is particularly useful where a design needs multichannel PCM and DSD decoding in one converter rather than separate single-channel DAC devices. System clocking, digital filtering mode, de-emphasis configuration, channel mapping, and output routing must be programmed through the serial control interface.

For PCB implementation, place the converter close to the analog output connectors and decoupling network, keep digital control and data traces away from sensitive output pins, and use a clean analog ground strategy. The LQFP package also requires thermal consideration when operating across a wide temperature range or with high digital activity. Follow the recommended decoupling, clocking, and analog-layout guidance in the manufacturer datasheet.

This product record combines the CS4382-KQZ conversion capabilities with package details, application guidance, design considerations, and a comparison of relevant same-family replacements. It is intended to help engineers select the correct converter variant, plan a compatible PCB footprint, and distinguish functionally similar devices that differ in package, qualification, or channel count.

Drop-in alternatives for CS4382-KQZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

CS4382-KQZ/E

✅ Drop-In
📦 48-LQFP
Related ordering suffix with the same eight-channel, 24-bit, 192 kHz converter architecture and 48-LQFP footprint; qualification and ordering details must be checked.

📋 Reference alternative (not in catalog)

CS4382A-CQZ

✅ Drop-In
📦 48-LQFP
Updated same-family 48-LQFP converter; nominal conversion architecture is the same, while revision-specific control and qualification details require verification.

📋 Reference alternative (not in catalog)

CS4382A-DQZ

✅ Drop-In
📦 48-LQFP
Same-family 48-LQFP update with nominally equivalent eight-channel conversion; device revision and environmental ordering codes differ by up to 100% of the suffix coding.

📋 Reference alternative (not in catalog)

CS4382A

✅ Drop-In
📦 48-LQFP
Eight-channel pin-compatible CS4382-family device; the A revision replaces the original ordering family while retaining the 48-LQFP interface.

📋 Reference alternative (not in catalog)

CS4362A

✅ Drop-In
📦 48-LQFP
Pin-compatible six-channel counterpart, providing 25% fewer channels than the eight-channel CS4382-KQZ in the same converter family.

📋 Reference alternative (not in catalog)

CS4382-KQZ Maximum Ratings & Electrical Characteristics

Product Type 8-channel audio digital-to-analog converter
Number of DAC Channels 8 channels
Conversion Resolution 24 bits
Maximum Sample Rate 192 kHz
Dynamic Range 114 dB
THD+N -100 dB
Supported Data Formats PCM and DSD
Delta-Sigma Order Fifth order
Digital Interpolation Integrated
Digital De-emphasis Integrated
Volume Control Integrated with soft ramp
Digital Filter Selectable
Analog Filtering Integrated
Package 48-LQFP
Mounting Type Surface mount

CS4382-KQZ 48-lqfp Pin Configuration Guide

Pin configuration for CS4382-KQZ (48-lqfp package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

48-lqfp package pinout diagram for CS4382-KQZ

No detailed pinout data available for CS4382-KQZ.

Refer to the datasheet for full pin configuration.

Typical Applications

CS4382-KQZ is suitable for 6 applications: 7.1-Channel Home-Theater Receiver, Professional Multi-Channel Monitor, Digital Mixing Console, Surround-Sound Decoder, High-End Network Music Player, Automotive Premium Audio Head Unit.

📺

7.1-Channel Home-Theater Receiver

The CS4382-KQZ fits a 7.1-channel receiver because its eight-channel DAC can drive the front, center, surround, rear, and subwooder outputs from one package. Its 24-bit conversion to 192 kHz preserves high-resolution source material, while 114 dB dynamic range and -100 dB THD+N support low-noise playback in quiet passages. The digital front end can send PCM or DSD data directly to the converter, and integrated volume control with a soft ramp helps control level changes. System integration still requires programming channel mapping, synchronization, filter selection, and output routing.

🎧

Professional Multi-Channel Monitor

The CS4382-KQZ is appropriate for a professional monitoring system requiring eight independently controlled converter channels. Its -100 dB THD+N and 114 dB dynamic range provide useful performance headroom for demanding monitoring applications, while fifth-order delta-sigma conversion keeps shaped quantization noise away from the intended audio band. The converter accepts PCM or DSD and supports selectable digital filters, allowing the system designer to choose between frequency-response and latency priorities. Deployment requires clean analog routing, stable clocking, decoupled supplies, and output stages matched to the monitor architecture.

🏭

Digital Mixing Console

A digital mixing console can use the CS4382-KQZ to convert its final multichannel mix into eight analog outputs. The 24-bit/192 kHz capability supports high-resolution mix sources, and integrated volume control reduces the need for additional digital attenuation stages in simple output paths. Selectable filtering gives the system integrator control over latency and spectral response, while soft-ramp volume behavior helps avoid clicks during level changes. For a production console, the converter should be synchronized with the mixer clock, isolated from high-current amplifier stages, and paired with balanced output circuitry.

🌐

Surround-Sound Decoder

The CS4382-KQZ is suited to a surround-sound decoder that must reproduce eight digital audio channels without using eight separate converter packages. Native support for PCM and DSD lets the decoder accept common high-resolution source formats, while the 192 kHz capability covers high-rate streams. Its integrated interpolation, de-emphasis, filtering, and volume functions reduce the number of external signal-processing blocks. A practical implementation must carefully define I2C or serial-control behavior, channel assignment, mute sequencing, and analog output mode because those settings determine compatibility with the downstream amplifiers.

📱

High-End Network Music Player

The CS4382-KQZ can serve in a high-end network music player that accepts digital audio from a network receiver, computer, or streaming interface. Its eight-channel capability permits multichannel content while also supporting simpler stereo deployments. The 114 dB dynamic range, -100 dB THD+N, and 24-bit/192 kHz conversion are valuable when the design emphasizes signal purity. Native DSD support can simplify a DSD-capable playback chain. For best performance, keep the digital interface isolated from the analog outputs and implement the converter's recommended grounding and decoupling without sharing high-current return paths with output amplifiers.

🚗

Automotive Premium Audio Head Unit

The CS4382-KQZ can support premium multichannel audio in a head unit when the complete digital audio architecture is designed around eight channels. Its 192 kHz conversion capability, PCM and DSD support, selectable filtering, and integrated volume control are useful for high-end source material and replicated cabin listening positions. The 48-LQFP package is compatible with standard surface-mount assembly, but automotive use requires confirmation of the exact ordering suffix, temperature range, reliability qualification, and lifecycle commitments. PCB design should isolate converter supplies from vehicle power transients and provide filtering appropriate to the audio supply network.

What are the key specifications of CS4382-KQZ that engineers should know?
The CS4382-KQZ is an eight-channel, 24-bit audio DAC that supports PCM and DSD data at sample rates up to 192 kHz. According to the manufacturer datasheet, it provides 114 dB dynamic range, -100 dB THD+N, fifth-order delta-sigma conversion, selectable digital filters, integrated volume control with soft ramp, digital de-emphasis, and analog filtering. The device is packaged in a 48-LQFP. These characteristics make it appropriate for multichannel home-theater, professional monitoring, digital mixing, and surround-sound applications where eight synchronized audio channels are required.
What is the CS4382-KQZ used for?
The CS4382-KQZ is used to convert multichannel digital audio into eight analog output channels. Its 24-bit conversion resolution, 192 kHz maximum sample rate, and support for both PCM and DSD allow it to serve as the central converter in a home-theater receiver, surround-sound decoder, professional monitor controller, or digital mixer. The manufacturer datasheet identifies digital interpolation, fifth-order delta-sigma conversion, volume control, and analog filtering as functions integrated into the device.
Where can I find the CS4382-KQZ datasheet PDF and pinout?
The CS4382-KQZ datasheet documentation contains the electrical characteristics, digital interface information, analog output descriptions, filter modes, and package drawings. The manufacturer datasheet is the controlling document for PCB layout and signal assignment. Use the pin-description table in that datasheet when assigning the 48-LQFP connections. A manufacturer-hosted PDF URL is not listed on this page, so the product record links to the available Cirrus Logic datasheet copy rather than constructing an unverified document address.
Does the CS4382-KQZ support both PCM and DSD audio?
Yes, the CS4382-KQZ supports PCM and DSD data formats directly. The manufacturer datasheet describes 24-bit conversion to sample rates as high as 192 kHz and identifies both formats among the device's principal features. DSD support allows a compatible digital front end to send native DSD information to the converter, while PCM support covers conventional digital audio streams. The source clocking and digital interface still need to be configured correctly for the selected format.
What dynamic range and distortion does the CS4382-KQZ provide?
The CS4382-KQZ provides 114 dB dynamic range and -100 dB THD+N. According to the manufacturer datasheet, these figures describe the eight-channel DAC's high-fidelity conversion performance. Dynamic range indicates the span between the largest and smallest meaningful signals the converter can represent, while THD+N describes combined harmonic distortion and noise. The figures are useful when assessing noise floor, quiet passages, and distortion performance in a high-end audio signal chain.
What is the difference between CS4382-KQZ and CS4382-KQZ/E?
CS4382-KQZ/E is a related CS4382 ordering variant with a distinct package or qualification suffix, while CS4382-KQZ is the base ordering code. Both parts are associated with the same eight-channel 24-bit, 192 kHz converter family and the same 48-LQFP footprint. The exact environmental, temperature, or production-status distinction must be confirmed from the ordering-information table in the manufacturer datasheet before substituting one suffix for the other in a released design.
Is CS4382-KQZ a drop-in replacement for CS4382A-CQZ?
The CS4382A-CQZ is a close same-family alternative with the same 48-LQFP class of package, but it should be treated as a design-review substitution rather than an unconditional drop-in. The related-device comparison identifies the CS4382A family as an updated version of the CS4382, while device revisions can change control-register behavior, supported modes, or electrical details. Check the register map, digital interface, power sequencing, and analog output requirements in the datasheets for both devices before approving the substitution.
When should I choose CS4382-KQZ over an eight-channel codec?
Choose the CS4382-KQZ when the design needs dedicated eight-channel DAC performance and does not require a codec's integrated analog-to-digital converters. It provides 24-bit conversion to 192 kHz, 114 dB dynamic range, PCM and DSD support, selectable digital filters, and integrated volume control. An integrated audio codec may be preferable when bidirectional recording, microphone preamplification, or a smaller mixed-signal integration is more important than a dedicated high-performance DAC signal path.
Can the CS4382-KQZ be used in a 7.1-channel home-theater receiver?
Yes, the eight-channel output architecture aligns naturally with a 7.1-channel audio system because it can provide front left, front right, center, surround left, surround right, rear left, rear right, and subwoofer outputs. The converter accepts digital PCM or DSD streams and performs eight-channel analog conversion at resolutions and rates up to 24-bit/192 kHz. Channel routing, volume control, and mute behavior must be configured through the device's control interface, with final output-stage and connector design handled separately.
What can replace the CS4382-KQZ?
The closest replacements include CS4382A-CQZ, CS4382A-DQZ, and the pin-compatible CS4362A/82A family, all of which require careful validation before substitution. The CS4382A devices retain the 48-LQFP format and closely related multichannel DAC architecture, while the CS4362A is a six-channel part and the 82A is its eight-channel counterpart. Register compatibility, control timing, filter modes, analog output topology, and qualification must be compared before calling any candidate a drop-in replacement.
What is the best Asahi Kasei Microdevices equivalent for CS4382-KQZ?
The AK4458VN is the closest identified cross-brand functional equivalent because it is an eight-channel, high-resolution DAC with a similar serial-interface concept. However, it is not an established drop-in replacement for the CS4382-KQZ: its package, pin assignment, register architecture, clock requirements, and output circuitry differ. The AK4458VN should therefore be treated as a redesign option requiring a new footprint and signal-path review, not as a board-level substitution.
Where can I buy the CS4382-KQZ and check stock?
Use the Request a Quote form on this page to request current CS4382-KQZ availability, minimum order quantity, and a formal quotation. Stock levels can change by package suffix and regional inventory, so current confirmation is preferable to copying a historical catalog figure. The page is designed to support purchasing requests for the exact CS4382-KQZ ordering code rather than a related CS4382 package or reel variant.
What is the lead time for CS4382-KQZ?
The current lead time for CS4382-KQZ should be confirmed through the Request a Quote form on this page. Lead time depends on the manufacturer's production status, exact ordering suffix, package configuration, available inventory, and requested quantity. For an approved design, include the schematic revision, target build date, annual usage forecast, and required inspection or qualification documentation with the request so the supply response reflects the actual manufacturing plan.
How much does the CS4382-KQZ cost?
Use the Request a Quote form on this page for the current CS4382-KQZ quotation and volume breaks. Commercial pricing can vary with quantity, package suffix, order cadence, and market conditions, so a historical catalog value should not be treated as a current offer. The quote request should specify the exact CS4382-KQZ MPN, required quantity, packaging preference, target date, and shipment destination for the most useful commercial response.
How should the CS4382-KQZ be laid out on a PCB?
Place the CS4382-KQZ close to the analog outputs and their output-network components, while keeping serial data, clock, and control traces away from sensitive analog pins. Follow the manufacturer datasheet's recommended supply and ground decoupling, clock-routing, exposed-return, and analog-output implementation. The 48-LQFP layout also needs adequate escape routing and assembly clearance. Prototype the digital and analog partitioning carefully because converter performance depends on clean references, controlled clocking, and short return paths.

Engineering reference data for CS4382-KQZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the CS4382-KQZ for a dedicated eight-channel, high-resolution audio DAC design that needs 24-bit conversion to 192 kHz, PCM and DSD support, selectable digital filters, and integrated volume control. It is a strong fit for 7.1-channel receivers, professional monitors, surround decoders, and multichannel network players. Consider CS4382A-CQZ or CS4382A-DQZ when the design can benefit from the revised same-family device, but verify register behavior, qualification, and environmental ordering requirements. CS4362A is appropriate only when six channels are needed and the associated control and routing behavior matches the original system. AK4458VN should be considered a redesign rather than a drop-in alternative because its package, pinout, and control architecture differ. For any substitution, validate clocking, filtering, analog output topology, supply sequencing, and channel routing before releasing a PCB revision.

Comparison with Alternatives

Parameter This Product CS4382-KQZ/E CS4382A-CQZ CS4382A-DQZ CS4382A CS4362A
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic
Package 48-LQFP 48-LQFP 48-LQFP 48-LQFP 48-LQFP 48-LQFP
DAC Channels 8 channels 8 channels 8 channels 8 channels 8 channels 6 channels

Key Differentiators

  • Eight-channel conversion in one device (vs CS4362A)
  • Direct high-resolution DSD support (vs CS4362A)
  • Documented conversion performance (vs CS4382A-CQZ)
  • Integrated multichannel volume management (vs CS4382-KQZ/E)

Design Notes

Separate the digital and analog regions around the converter. Place the recommended input and output capacitors close to their associated pins, route digital data and control signals away from the analog outputs, and provide continuous ground-plane paths under the device where the package and layout guidance permit. The high sample rate and delta-sigma architecture can couple switching and clock energy into the output path, so short analog traces, carefully positioned return vias, and isolated supply routing are more effective than filtering added after long, noisy routes.

Use the manufacturer's recommended clock and serial-data topology and preserve the specified signal-integrity margin on the digital interface. Clock, data, and latch timing must be satisfied across all supported PCM and DSD modes. Avoid adding unnecessary stubs or long test-point branches on high-speed digital nets. If a source cannot provide the required master clock or framed audio timing, use an asynchronous sample-rate converter before the DAC rather than relying on software to compensate for an invalid clock relationship.

Decouple each supply rail at the converter pins and keep switching-regulator and output-amplifier currents away from the sensitive analog return path. Follow the datasheet's recommended capacitor types, effective capacitance, and voltage ratings rather than substituting based only on nominal capacitance. Keep analog and digital supply returns joined according to the manufacturer's grounding architecture. Validate startup, mute, and power-sequencing behavior with worst-case channel volume settings because abrupt output transitions can expose supply or reference instability.

Do not treat a same-family converter as interchangeable merely because it uses a 48-LQFP package. Verify the pin table, control-register map, supported sample rates, digital filter modes, DSD behavior, analog output mode, supply sequencing, and qualification suffix before approving a substitution. In particular, CS4362A provides six channels while CS4382 is an eight-channel device, so a board using all eight outputs cannot use that part without a corresponding routing change.

Keep output-network and connector paths short, and place the converter and its analog support components in an order that avoids passing sensitive outputs near the digital interface or supply regulators. Use symmetrical routing when channel timing or skew matters. Preserve the exposed pad and ground connectivity required by the package drawing, and maintain assembly clearance for the LQFP leads. A balanced output implementation should use matched component placement and geometry to reduce channel-to-channel delay and amplitude differences.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status and automotive qualification must be confirmed against the exact ordering suffix and the manufacturer's current product documentation.

Related Searches

cs4382 kqz cs4382 dac cs4382 datasheet CS4382-KQZ datasheet pdf CS4382-KQZ pinout CS4382-KQZ 48-LQFP footprint CS4382-KQZ PCM DSD converter CS4382-KQZ 24-bit 192kHz CS4382-KQZ replacement CS4382-KQZ equivalent CS4382-KQZ vs CS4382A-CQZ Cirrus Logic CS4382-KQZ CS4382-KQZ price CS4382-KQZ stock CS4382-KQZ application circuit

Related Components & Terms

Cirrus Logic CS4382-KQZ CS4382-KQZ/E CS4382A-CQZ CS4382A-DQZ CS4362A CS4382A AK4458VN audio DAC digital-to-analog converter mixed-signal IC PCM DSD delta-sigma converter fifth-order delta-sigma digital interpolation digital de-emphasis selectable digital filter soft-ramp volume control 114 dB dynamic range -100 dB THD+N 48-LQFP surface mount 7.1-channel audio professional audio monitor home-theater receiver
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details