CY7C68001-56PVXCT USB 2.0 Controller | Infineon
MPN: CY7C68001-56PVXCT ✗ End of LifeCY7C68001-56PVXCT Overview
A USB controller is an interface IC that manages the physical USB connection, transaction handling, and transfer of data between a USB bus and an internal parallel processor or peripheral. The CY7C68001-56PVXCT sits within the hierarchy of USB interface controllers, interface ICs, and broader semiconductor signal-processing devices. Its parallel datapath provides a practical bridge between a USB connection and a conventional digital system bus.
The principal identifiable features are USB 2.0 operation, an 8/16-bit parallel datapath, a 56-pin SSOP package, and commercial temperature-grade positioning. The controller is useful when a board needs USB connectivity without routing the USB traffic directly into the host processor's internal bus architecture. The parallel interface can simplify firmware interfacing when the system already uses an 8-bit or 16-bit external data path.
The CY7C68001 family belongs to the USB controller and bus-controller product category rather than to microcontrollers or general-purpose interface transceivers. Its role is protocol and datapath management at the USB-to-parallel boundary. This makes it relevant to embedded control boards, test equipment, data-acquisition systems, printers, scanners, and other peripherals where USB is the external connection and an embedded controller manages the local data path.
Typical applications include USB-to-parallel embedded bridges, laboratory and industrial interface adapters, USB data acquisition front ends, and compact control systems requiring a deterministic parallel interface. In these applications, the controller can offload USB transaction handling from the main processor while preserving a familiar parallel bus connection for registers, FIFOs, or external peripherals.
The primary design consideration is confirming the controller's electrical interface, clocking, firmware support, and signal timing against the system architecture. Place the device with its signal and power connections organized according to the manufacturer datasheet, provide appropriate decoupling at the supply pins, and route high-speed USB differential traces as a controlled impedance pair. Keep the parallel bus timing margin explicit in the firmware and board design.
This page summarizes the part's identified USB interface role, package, and commercial catalog attributes, then adds application context, design guidance, comparison criteria, and sourcing questions that are more useful than a basic distributor listing alone.
Drop-in alternatives for CY7C68001-56PVXCT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with CY7C68001-56PVXCT (same form factor and footprint) — differing in Package Type, Product Type, Board-Level Manufacturing Test, External Master Compatibility, Package Dimensions.
CY7C68000-56PVXCT
✅ Drop-In📋 Reference alternative (not in catalog)
CY7C68000-56PVXC
✅ Drop-InContact for price
View Datasheet →CY7C68001-56LTXC
✅ Drop-InContact for price
View Datasheet →CY7C63413C-PVXCT
✅ Drop-In📋 Reference alternative (not in catalog)
CY7C68001-56PVXC
✅ Drop-InContact for price
View Datasheet →CY7C68001-56PVXCT Specifications
| Device Type | USB 2.0 controller with parallel interface |
| USB Specification | USB 2.0 |
| Interface Type | Parallel interface |
| Datapath Width | 8/16 bit |
| Package | 56-pin SSOP |
| Terminal Count | 56 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Mounting Type | Surface mount |
| Temperature Grade | Commercial |
| Controller Category | Bus controller |
CY7C68001-56PVXCT rectangular Pin Configuration Guide
Pin configuration for CY7C68001-56PVXCT (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for CY7C68001-56PVXCT.
Refer to the datasheet for full pin configuration.
Typical Applications
CY7C68001-56PVXCT is suitable for 6 applications: USB-to-parallel embedded bridge, Industrial data-acquisition interface, Laboratory instrument controller, USB data-acquisition front end, Legacy peripheral connectivity, Embedded communications adapter.
USB-to-parallel embedded bridge
The CY7C68001-56PVXCT fits a USB-to-parallel bridge because it is identified as a USB 2.0 controller with an 8/16-bit parallel datapath. Place it between an external USB connector and an embedded system bus so the main processor does not need to implement the USB transaction layer directly. The 56-pin SSOP supports compact board layouts, while the parallel interface provides a familiar data path for registers, FIFOs, or peripheral logic. Before schematic release, verify supply voltage, clock requirements, signal timing, endpoint behavior, and firmware expectations in the manufacturer datasheet.
Recommended
Industrial data-acquisition interface
The CY7C68001-56PVXCT can serve as the USB-facing controller in an industrial data-acquisition system that collects local parallel data and transfers it to a host computer. Its USB 2.0 interface and 8/16-bit datapath are useful when the acquisition engine already presents a byte- or word-oriented bus. The commercial temperature-grade catalog position suits ordinary commercial equipment, but prolonged industrial exposure requires confirmation of the operating-temperature limits. Validate bus timing, clocking, power distribution, and sustained-transfer behavior against the system workload.
Recommended
Laboratory instrument controller
A laboratory instrument can use the CY7C68001-56PVXCT to bridge a USB 2.0 connection to an internal parallel control or measurement datapath. This arrangement is appropriate when the instrument uses register-based commands, buffered samples, or a legacy parallel acquisition block. The controller separates USB traffic handling from the instrument's timing-sensitive control logic, reducing software complexity when the firmware interface is already organized around 8-bit or 16-bit transfers. Use the datasheet to confirm supported USB roles, transfer rates, clock sources, and electrical timing.
Recommended
USB data-acquisition front end
The CY7C68001-56PVXCT is suitable for a USB data-acquisition front end that receives samples through a parallel source and sends them to a host. Its 8/16-bit datapath can align with byte-wide or word-wide sample and control paths, while the USB 2.0 interface provides a standard external connection. The implementation should include careful decoupling, controlled-impedance USB routing, and explicit timing margins for the parallel side. Check FIFO depth, sustained-transfer behavior, and endpoint configuration in the manufacturer documentation.
Recommended
Legacy peripheral connectivity
The CY7C68001-56PVXCT can add USB connectivity to a legacy peripheral whose internal architecture is based on an 8-bit or 16-bit parallel bus. Instead of replacing the established processor or acquisition logic, the controller can provide the USB-facing bridge and allow the existing parallel subsystem to remain in place. This is useful for printers, scanners, test fixtures, and industrial adapters during modernization projects. A replacement should be approved only after checking pin assignments, register compatibility, clocking, power rails, and the host-side software requirements.
Recommended
Embedded communications adapter
The CY7C68001-56PVXCT can support an embedded communications adapter that uses USB as its external service or configuration port and a parallel interface for local protocol processing. The 56-pin SSOP provides a reasonably dense implementation for compact embedded systems, while the parallel datapath can connect to registers, buffer memory, or another controller. Keep USB differential routing short and away from noisy analog or switching sections, and provide local decoupling at every required supply connection. Confirm host and device capabilities, clock configuration, and suspension behavior before finalizing the design.
Recommended
Recommended Products Summary
Engineering reference data for CY7C68001-56PVXCT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | CY7C68000-56PVXCT | CY7C68000-56PVXC | CY7C68001-56LTXC | CY7C63413C-PVXCT | CY7C68001-56PVXC |
|---|---|---|---|---|---|---|
| Package | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Device Category | USB controller / bus controller | USB interface controller | USB interface controller | USB interface controller | USB interface controller | USB controller / bus controller |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Key Differentiators
- Defined 8/16-bit parallel datapath (vs CY7C68000-56PVXCT)
- USB 2.0 interface positioning (vs CY7C63413C-PVXCT)
- Exact commercial-grade 56-terminal identification (vs CY7C68001-56LTXC)
Design Notes
Place the USB controller close to the USB connector and route the differential pair as a controlled-impedance path. Keep the parallel-side signals away from the USB pair and from switching-node circuitry to reduce crosstalk and edge degradation. The 56-pin SSOP requires careful fanout, so use short escape routes from each pin and place decoupling capacitors adjacent to the relevant supply pins according to the manufacturer layout guidance.
Verify the supply voltage, current consumption, sequencing, and decoupling requirements in the manufacturer datasheet before assigning the power rails. Separate sensitive analog or low-level signal returns from noisy USB return-current paths where the board architecture permits it. If the parallel bus drives external equipment rather than an on-board processor, include the required series damping, impedance matching, and overvoltage protection in the system design.
Do not treat a matching SSOP outline as proof of drop-in compatibility. Compare pin-by-pin signal names, voltage domains, input and output directions, pull-up requirements, clock pins, reset behavior, USB D-plus and D-minus pins, and exposed or undocumented functions. For firmware, validate endpoint configuration, enumeration behavior, suspend and resume handling, and the register map before using a related CY7C68000, CY7C68001-56LTXC, or CY7C63413C variant.
Review the parallel bus edge rate and timing budget at the intended clock. If the bus connects to a long trace, external connector, or slow legacy peripheral, model the round-trip behavior and add series termination or controlled drive strength only where supported by the device. Confirm clock jitter, skew, setup, and hold requirements from the datasheet, and avoid using the USB pair as a general-purpose signal path.
Compliance Information
The available product information identifies commercial temperature grade and the package configuration but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.